| /* |
| * Copyright (C) 2017 Sanechips Technology Co., Ltd. |
| * Copyright 2017 Linaro Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/component.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drmP.h> |
| |
| #include "zx_drm_drv.h" |
| #include "zx_vga_regs.h" |
| #include "zx_vou.h" |
| |
| struct zx_vga_pwrctrl { |
| struct regmap *regmap; |
| u32 reg; |
| u32 mask; |
| }; |
| |
| struct zx_vga_i2c { |
| struct i2c_adapter adap; |
| struct mutex lock; |
| }; |
| |
| struct zx_vga { |
| struct drm_connector connector; |
| struct drm_encoder encoder; |
| struct zx_vga_i2c *ddc; |
| struct device *dev; |
| void __iomem *mmio; |
| struct clk *i2c_wclk; |
| struct zx_vga_pwrctrl pwrctrl; |
| struct completion complete; |
| bool connected; |
| }; |
| |
| #define to_zx_vga(x) container_of(x, struct zx_vga, x) |
| |
| static void zx_vga_encoder_enable(struct drm_encoder *encoder) |
| { |
| struct zx_vga *vga = to_zx_vga(encoder); |
| struct zx_vga_pwrctrl *pwrctrl = &vga->pwrctrl; |
| |
| /* Set bit to power up VGA DACs */ |
| regmap_update_bits(pwrctrl->regmap, pwrctrl->reg, pwrctrl->mask, |
| pwrctrl->mask); |
| |
| vou_inf_enable(VOU_VGA, encoder->crtc); |
| } |
| |
| static void zx_vga_encoder_disable(struct drm_encoder *encoder) |
| { |
| struct zx_vga *vga = to_zx_vga(encoder); |
| struct zx_vga_pwrctrl *pwrctrl = &vga->pwrctrl; |
| |
| vou_inf_disable(VOU_VGA, encoder->crtc); |
| |
| /* Clear bit to power down VGA DACs */ |
| regmap_update_bits(pwrctrl->regmap, pwrctrl->reg, pwrctrl->mask, 0); |
| } |
| |
| static const struct drm_encoder_helper_funcs zx_vga_encoder_helper_funcs = { |
| .enable = zx_vga_encoder_enable, |
| .disable = zx_vga_encoder_disable, |
| }; |
| |
| static const struct drm_encoder_funcs zx_vga_encoder_funcs = { |
| .destroy = drm_encoder_cleanup, |
| }; |
| |
| static int zx_vga_connector_get_modes(struct drm_connector *connector) |
| { |
| struct zx_vga *vga = to_zx_vga(connector); |
| struct edid *edid; |
| int ret; |
| |
| /* |
| * Clear both detection bits to switch I2C bus from device |
| * detecting to EDID reading. |
| */ |
| zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, 0); |
| |
| edid = drm_get_edid(connector, &vga->ddc->adap); |
| if (!edid) { |
| /* |
| * If EDID reading fails, we set the device state into |
| * disconnected. Locking is not required here, since the |
| * VGA_AUTO_DETECT_SEL register write in irq handler cannot |
| * be triggered when both detection bits are cleared as above. |
| */ |
| zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, |
| VGA_DETECT_SEL_NO_DEVICE); |
| vga->connected = false; |
| return 0; |
| } |
| |
| /* |
| * As edid reading succeeds, device must be connected, so we set |
| * up detection bit for unplug interrupt here. |
| */ |
| zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, VGA_DETECT_SEL_HAS_DEVICE); |
| |
| drm_mode_connector_update_edid_property(connector, edid); |
| ret = drm_add_edid_modes(connector, edid); |
| kfree(edid); |
| |
| return ret; |
| } |
| |
| static enum drm_mode_status |
| zx_vga_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| return MODE_OK; |
| } |
| |
| static struct drm_connector_helper_funcs zx_vga_connector_helper_funcs = { |
| .get_modes = zx_vga_connector_get_modes, |
| .mode_valid = zx_vga_connector_mode_valid, |
| }; |
| |
| static enum drm_connector_status |
| zx_vga_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct zx_vga *vga = to_zx_vga(connector); |
| |
| return vga->connected ? connector_status_connected : |
| connector_status_disconnected; |
| } |
| |
| static const struct drm_connector_funcs zx_vga_connector_funcs = { |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .detect = zx_vga_connector_detect, |
| .destroy = drm_connector_cleanup, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static int zx_vga_register(struct drm_device *drm, struct zx_vga *vga) |
| { |
| struct drm_encoder *encoder = &vga->encoder; |
| struct drm_connector *connector = &vga->connector; |
| struct device *dev = vga->dev; |
| int ret; |
| |
| encoder->possible_crtcs = VOU_CRTC_MASK; |
| |
| ret = drm_encoder_init(drm, encoder, &zx_vga_encoder_funcs, |
| DRM_MODE_ENCODER_DAC, NULL); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to init encoder: %d\n", ret); |
| return ret; |
| }; |
| |
| drm_encoder_helper_add(encoder, &zx_vga_encoder_helper_funcs); |
| |
| vga->connector.polled = DRM_CONNECTOR_POLL_HPD; |
| |
| ret = drm_connector_init(drm, connector, &zx_vga_connector_funcs, |
| DRM_MODE_CONNECTOR_VGA); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to init connector: %d\n", ret); |
| goto clean_encoder; |
| }; |
| |
| drm_connector_helper_add(connector, &zx_vga_connector_helper_funcs); |
| |
| ret = drm_mode_connector_attach_encoder(connector, encoder); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to attach encoder: %d\n", ret); |
| goto clean_connector; |
| }; |
| |
| return 0; |
| |
| clean_connector: |
| drm_connector_cleanup(connector); |
| clean_encoder: |
| drm_encoder_cleanup(encoder); |
| return ret; |
| } |
| |
| static int zx_vga_pwrctrl_init(struct zx_vga *vga) |
| { |
| struct zx_vga_pwrctrl *pwrctrl = &vga->pwrctrl; |
| struct device *dev = vga->dev; |
| struct of_phandle_args out_args; |
| struct regmap *regmap; |
| int ret; |
| |
| ret = of_parse_phandle_with_fixed_args(dev->of_node, |
| "zte,vga-power-control", 2, 0, &out_args); |
| if (ret) |
| return ret; |
| |
| regmap = syscon_node_to_regmap(out_args.np); |
| if (IS_ERR(regmap)) { |
| ret = PTR_ERR(regmap); |
| goto out; |
| } |
| |
| pwrctrl->regmap = regmap; |
| pwrctrl->reg = out_args.args[0]; |
| pwrctrl->mask = out_args.args[1]; |
| |
| out: |
| of_node_put(out_args.np); |
| return ret; |
| } |
| |
| static int zx_vga_i2c_read(struct zx_vga *vga, struct i2c_msg *msg) |
| { |
| int len = msg->len; |
| u8 *buf = msg->buf; |
| u32 offset = 0; |
| int i; |
| |
| reinit_completion(&vga->complete); |
| |
| /* Select combo write */ |
| zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_COMBO, VGA_CMD_COMBO); |
| zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_RW, 0); |
| |
| while (len > 0) { |
| u32 cnt; |
| |
| /* Clear RX FIFO */ |
| zx_writel_mask(vga->mmio + VGA_RXF_CTRL, VGA_RX_FIFO_CLEAR, |
| VGA_RX_FIFO_CLEAR); |
| |
| /* Data offset to read from */ |
| zx_writel(vga->mmio + VGA_SUB_ADDR, offset); |
| |
| /* Kick off the transfer */ |
| zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_TRANS, |
| VGA_CMD_TRANS); |
| |
| if (!wait_for_completion_timeout(&vga->complete, |
| msecs_to_jiffies(1000))) { |
| DRM_DEV_ERROR(vga->dev, "transfer timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| cnt = zx_readl(vga->mmio + VGA_RXF_STATUS); |
| cnt = (cnt & VGA_RXF_COUNT_MASK) >> VGA_RXF_COUNT_SHIFT; |
| /* FIFO status may report more data than we need to read */ |
| cnt = min_t(u32, len, cnt); |
| |
| for (i = 0; i < cnt; i++) |
| *buf++ = zx_readl(vga->mmio + VGA_DATA); |
| |
| len -= cnt; |
| offset += cnt; |
| } |
| |
| return 0; |
| } |
| |
| static int zx_vga_i2c_write(struct zx_vga *vga, struct i2c_msg *msg) |
| { |
| /* |
| * The DDC I2C adapter is only for reading EDID data, so we assume |
| * that the write to this adapter must be the EDID data offset. |
| */ |
| if ((msg->len != 1) || ((msg->addr != DDC_ADDR))) |
| return -EINVAL; |
| |
| /* Hardware will take care of the slave address shifting */ |
| zx_writel(vga->mmio + VGA_DEVICE_ADDR, msg->addr); |
| |
| return 0; |
| } |
| |
| static int zx_vga_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, |
| int num) |
| { |
| struct zx_vga *vga = i2c_get_adapdata(adap); |
| struct zx_vga_i2c *ddc = vga->ddc; |
| int ret = 0; |
| int i; |
| |
| mutex_lock(&ddc->lock); |
| |
| for (i = 0; i < num; i++) { |
| if (msgs[i].flags & I2C_M_RD) |
| ret = zx_vga_i2c_read(vga, &msgs[i]); |
| else |
| ret = zx_vga_i2c_write(vga, &msgs[i]); |
| |
| if (ret < 0) |
| break; |
| } |
| |
| if (!ret) |
| ret = num; |
| |
| mutex_unlock(&ddc->lock); |
| |
| return ret; |
| } |
| |
| static u32 zx_vga_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm zx_vga_algorithm = { |
| .master_xfer = zx_vga_i2c_xfer, |
| .functionality = zx_vga_i2c_func, |
| }; |
| |
| static int zx_vga_ddc_register(struct zx_vga *vga) |
| { |
| struct device *dev = vga->dev; |
| struct i2c_adapter *adap; |
| struct zx_vga_i2c *ddc; |
| int ret; |
| |
| ddc = devm_kzalloc(dev, sizeof(*ddc), GFP_KERNEL); |
| if (!ddc) |
| return -ENOMEM; |
| |
| vga->ddc = ddc; |
| mutex_init(&ddc->lock); |
| |
| adap = &ddc->adap; |
| adap->owner = THIS_MODULE; |
| adap->class = I2C_CLASS_DDC; |
| adap->dev.parent = dev; |
| adap->algo = &zx_vga_algorithm; |
| snprintf(adap->name, sizeof(adap->name), "zx vga i2c"); |
| |
| ret = i2c_add_adapter(adap); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to add I2C adapter: %d\n", ret); |
| return ret; |
| } |
| |
| i2c_set_adapdata(adap, vga); |
| |
| return 0; |
| } |
| |
| static irqreturn_t zx_vga_irq_thread(int irq, void *dev_id) |
| { |
| struct zx_vga *vga = dev_id; |
| |
| drm_helper_hpd_irq_event(vga->connector.dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t zx_vga_irq_handler(int irq, void *dev_id) |
| { |
| struct zx_vga *vga = dev_id; |
| u32 status; |
| |
| status = zx_readl(vga->mmio + VGA_I2C_STATUS); |
| |
| /* Clear interrupt status */ |
| zx_writel_mask(vga->mmio + VGA_I2C_STATUS, VGA_CLEAR_IRQ, |
| VGA_CLEAR_IRQ); |
| |
| if (status & VGA_DEVICE_CONNECTED) { |
| /* |
| * Since VGA_DETECT_SEL bits need to be reset for switching DDC |
| * bus from device detection to EDID read, rather than setting |
| * up HAS_DEVICE bit here, we need to do that in .get_modes |
| * hook for unplug detecting after EDID read succeeds. |
| */ |
| vga->connected = true; |
| return IRQ_WAKE_THREAD; |
| } |
| |
| if (status & VGA_DEVICE_DISCONNECTED) { |
| zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, |
| VGA_DETECT_SEL_NO_DEVICE); |
| vga->connected = false; |
| return IRQ_WAKE_THREAD; |
| } |
| |
| if (status & VGA_TRANS_DONE) { |
| complete(&vga->complete); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| static void zx_vga_hw_init(struct zx_vga *vga) |
| { |
| unsigned long ref = clk_get_rate(vga->i2c_wclk); |
| int div; |
| |
| /* |
| * Set up I2C fast speed divider per formula below to get 400kHz. |
| * scl = ref / ((div + 1) * 4) |
| */ |
| div = DIV_ROUND_UP(ref / 1000, 400 * 4) - 1; |
| zx_writel(vga->mmio + VGA_CLK_DIV_FS, div); |
| |
| /* Set up device detection */ |
| zx_writel(vga->mmio + VGA_AUTO_DETECT_PARA, 0x80); |
| zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, VGA_DETECT_SEL_NO_DEVICE); |
| |
| /* |
| * We need to poke monitor via DDC bus to get connection irq |
| * start working. |
| */ |
| zx_writel(vga->mmio + VGA_DEVICE_ADDR, DDC_ADDR); |
| zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_TRANS, VGA_CMD_TRANS); |
| } |
| |
| static int zx_vga_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct drm_device *drm = data; |
| struct resource *res; |
| struct zx_vga *vga; |
| int irq; |
| int ret; |
| |
| vga = devm_kzalloc(dev, sizeof(*vga), GFP_KERNEL); |
| if (!vga) |
| return -ENOMEM; |
| |
| vga->dev = dev; |
| dev_set_drvdata(dev, vga); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| vga->mmio = devm_ioremap_resource(dev, res); |
| if (IS_ERR(vga->mmio)) |
| return PTR_ERR(vga->mmio); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| vga->i2c_wclk = devm_clk_get(dev, "i2c_wclk"); |
| if (IS_ERR(vga->i2c_wclk)) { |
| ret = PTR_ERR(vga->i2c_wclk); |
| DRM_DEV_ERROR(dev, "failed to get i2c_wclk: %d\n", ret); |
| return ret; |
| } |
| |
| ret = zx_vga_pwrctrl_init(vga); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to init power control: %d\n", ret); |
| return ret; |
| } |
| |
| ret = zx_vga_ddc_register(vga); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to register ddc: %d\n", ret); |
| return ret; |
| } |
| |
| ret = zx_vga_register(drm, vga); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to register vga: %d\n", ret); |
| return ret; |
| } |
| |
| init_completion(&vga->complete); |
| |
| ret = devm_request_threaded_irq(dev, irq, zx_vga_irq_handler, |
| zx_vga_irq_thread, IRQF_SHARED, |
| dev_name(dev), vga); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to request threaded irq: %d\n", ret); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(vga->i2c_wclk); |
| if (ret) |
| return ret; |
| |
| zx_vga_hw_init(vga); |
| |
| return 0; |
| } |
| |
| static void zx_vga_unbind(struct device *dev, struct device *master, |
| void *data) |
| { |
| struct zx_vga *vga = dev_get_drvdata(dev); |
| |
| clk_disable_unprepare(vga->i2c_wclk); |
| } |
| |
| static const struct component_ops zx_vga_component_ops = { |
| .bind = zx_vga_bind, |
| .unbind = zx_vga_unbind, |
| }; |
| |
| static int zx_vga_probe(struct platform_device *pdev) |
| { |
| return component_add(&pdev->dev, &zx_vga_component_ops); |
| } |
| |
| static int zx_vga_remove(struct platform_device *pdev) |
| { |
| component_del(&pdev->dev, &zx_vga_component_ops); |
| return 0; |
| } |
| |
| static const struct of_device_id zx_vga_of_match[] = { |
| { .compatible = "zte,zx296718-vga", }, |
| { /* end */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, zx_vga_of_match); |
| |
| struct platform_driver zx_vga_driver = { |
| .probe = zx_vga_probe, |
| .remove = zx_vga_remove, |
| .driver = { |
| .name = "zx-vga", |
| .of_match_table = zx_vga_of_match, |
| }, |
| }; |