| /* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #ifndef _I915_REG_H_ |
| #define _I915_REG_H_ |
| |
| typedef struct { |
| uint32_t reg; |
| } i915_reg_t; |
| |
| #define _MMIO(r) ((const i915_reg_t){ .reg = (r) }) |
| |
| #define INVALID_MMIO_REG _MMIO(0) |
| |
| static inline uint32_t i915_mmio_reg_offset(i915_reg_t reg) |
| { |
| return reg.reg; |
| } |
| |
| static inline bool i915_mmio_reg_equal(i915_reg_t a, i915_reg_t b) |
| { |
| return i915_mmio_reg_offset(a) == i915_mmio_reg_offset(b); |
| } |
| |
| static inline bool i915_mmio_reg_valid(i915_reg_t reg) |
| { |
| return !i915_mmio_reg_equal(reg, INVALID_MMIO_REG); |
| } |
| |
| #define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) |
| #define _MMIO_PIPE(pipe, a, b) _MMIO(_PIPE(pipe, a, b)) |
| #define _PLANE(plane, a, b) _PIPE(plane, a, b) |
| #define _MMIO_PLANE(plane, a, b) _MMIO_PIPE(plane, a, b) |
| #define _TRANS(tran, a, b) ((a) + (tran)*((b)-(a))) |
| #define _MMIO_TRANS(tran, a, b) _MMIO(_TRANS(tran, a, b)) |
| #define _PORT(port, a, b) ((a) + (port)*((b)-(a))) |
| #define _MMIO_PORT(port, a, b) _MMIO(_PORT(port, a, b)) |
| #define _PIPE3(pipe, a, b, c) ((pipe) == PIPE_A ? (a) : \ |
| (pipe) == PIPE_B ? (b) : (c)) |
| #define _MMIO_PIPE3(pipe, a, b, c) _MMIO(_PIPE3(pipe, a, b, c)) |
| #define _PORT3(port, a, b, c) ((port) == PORT_A ? (a) : \ |
| (port) == PORT_B ? (b) : (c)) |
| #define _MMIO_PORT3(pipe, a, b, c) _MMIO(_PORT3(pipe, a, b, c)) |
| |
| #define _MASKED_FIELD(mask, value) ({ \ |
| if (__builtin_constant_p(mask)) \ |
| BUILD_BUG_ON_MSG(((mask) & 0xffff0000), "Incorrect mask"); \ |
| if (__builtin_constant_p(value)) \ |
| BUILD_BUG_ON_MSG((value) & 0xffff0000, "Incorrect value"); \ |
| if (__builtin_constant_p(mask) && __builtin_constant_p(value)) \ |
| BUILD_BUG_ON_MSG((value) & ~(mask), \ |
| "Incorrect value for mask"); \ |
| (mask) << 16 | (value); }) |
| #define _MASKED_BIT_ENABLE(a) ({ typeof(a) _a = (a); _MASKED_FIELD(_a, _a); }) |
| #define _MASKED_BIT_DISABLE(a) (_MASKED_FIELD((a), 0)) |
| |
| |
| |
| /* PCI config space */ |
| |
| #define MCHBAR_I915 0x44 |
| #define MCHBAR_I965 0x48 |
| #define MCHBAR_SIZE (4 * 4096) |
| |
| #define DEVEN 0x54 |
| #define DEVEN_MCHBAR_EN (1 << 28) |
| |
| #define BSM 0x5c |
| #define BSM_MASK (0xFFFF << 20) |
| |
| #define HPLLCC 0xc0 /* 85x only */ |
| #define GC_CLOCK_CONTROL_MASK (0x7 << 0) |
| #define GC_CLOCK_133_200 (0 << 0) |
| #define GC_CLOCK_100_200 (1 << 0) |
| #define GC_CLOCK_100_133 (2 << 0) |
| #define GC_CLOCK_133_266 (3 << 0) |
| #define GC_CLOCK_133_200_2 (4 << 0) |
| #define GC_CLOCK_133_266_2 (5 << 0) |
| #define GC_CLOCK_166_266 (6 << 0) |
| #define GC_CLOCK_166_250 (7 << 0) |
| |
| #define I915_GDRST 0xc0 /* PCI config register */ |
| #define GRDOM_FULL (0 << 2) |
| #define GRDOM_RENDER (1 << 2) |
| #define GRDOM_MEDIA (3 << 2) |
| #define GRDOM_MASK (3 << 2) |
| #define GRDOM_RESET_STATUS (1 << 1) |
| #define GRDOM_RESET_ENABLE (1 << 0) |
| |
| #define GCDGMBUS 0xcc |
| |
| #define GCFGC2 0xda |
| #define GCFGC 0xf0 /* 915+ only */ |
| #define GC_LOW_FREQUENCY_ENABLE (1 << 7) |
| #define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4) |
| #define GC_DISPLAY_CLOCK_333_MHZ (4 << 4) |
| #define GC_DISPLAY_CLOCK_267_MHZ_PNV (0 << 4) |
| #define GC_DISPLAY_CLOCK_333_MHZ_PNV (1 << 4) |
| #define GC_DISPLAY_CLOCK_444_MHZ_PNV (2 << 4) |
| #define GC_DISPLAY_CLOCK_200_MHZ_PNV (5 << 4) |
| #define GC_DISPLAY_CLOCK_133_MHZ_PNV (6 << 4) |
| #define GC_DISPLAY_CLOCK_167_MHZ_PNV (7 << 4) |
| #define GC_DISPLAY_CLOCK_MASK (7 << 4) |
| #define GM45_GC_RENDER_CLOCK_MASK (0xf << 0) |
| #define GM45_GC_RENDER_CLOCK_266_MHZ (8 << 0) |
| #define GM45_GC_RENDER_CLOCK_320_MHZ (9 << 0) |
| #define GM45_GC_RENDER_CLOCK_400_MHZ (0xb << 0) |
| #define GM45_GC_RENDER_CLOCK_533_MHZ (0xc << 0) |
| #define I965_GC_RENDER_CLOCK_MASK (0xf << 0) |
| #define I965_GC_RENDER_CLOCK_267_MHZ (2 << 0) |
| #define I965_GC_RENDER_CLOCK_333_MHZ (3 << 0) |
| #define I965_GC_RENDER_CLOCK_444_MHZ (4 << 0) |
| #define I965_GC_RENDER_CLOCK_533_MHZ (5 << 0) |
| #define I945_GC_RENDER_CLOCK_MASK (7 << 0) |
| #define I945_GC_RENDER_CLOCK_166_MHZ (0 << 0) |
| #define I945_GC_RENDER_CLOCK_200_MHZ (1 << 0) |
| #define I945_GC_RENDER_CLOCK_250_MHZ (3 << 0) |
| #define I945_GC_RENDER_CLOCK_400_MHZ (5 << 0) |
| #define I915_GC_RENDER_CLOCK_MASK (7 << 0) |
| #define I915_GC_RENDER_CLOCK_166_MHZ (0 << 0) |
| #define I915_GC_RENDER_CLOCK_200_MHZ (1 << 0) |
| #define I915_GC_RENDER_CLOCK_333_MHZ (4 << 0) |
| |
| #define ASLE 0xe4 |
| #define ASLS 0xfc |
| |
| #define SWSCI 0xe8 |
| #define SWSCI_SCISEL (1 << 15) |
| #define SWSCI_GSSCIE (1 << 0) |
| |
| #define LBPC 0xf4 /* legacy/combination backlight modes, also called LBB */ |
| |
| |
| #define ILK_GDSR _MMIO(MCHBAR_MIRROR_BASE + 0x2ca4) |
| #define ILK_GRDOM_FULL (0<<1) |
| #define ILK_GRDOM_RENDER (1<<1) |
| #define ILK_GRDOM_MEDIA (3<<1) |
| #define ILK_GRDOM_MASK (3<<1) |
| #define ILK_GRDOM_RESET_ENABLE (1<<0) |
| |
| #define GEN6_MBCUNIT_SNPCR _MMIO(0x900c) /* for LLC config */ |
| #define GEN6_MBC_SNPCR_SHIFT 21 |
| #define GEN6_MBC_SNPCR_MASK (3<<21) |
| #define GEN6_MBC_SNPCR_MAX (0<<21) |
| #define GEN6_MBC_SNPCR_MED (1<<21) |
| #define GEN6_MBC_SNPCR_LOW (2<<21) |
| #define GEN6_MBC_SNPCR_MIN (3<<21) /* only 1/16th of the cache is shared */ |
| |
| #define VLV_G3DCTL _MMIO(0x9024) |
| #define VLV_GSCKGCTL _MMIO(0x9028) |
| |
| #define GEN6_MBCTL _MMIO(0x0907c) |
| #define GEN6_MBCTL_ENABLE_BOOT_FETCH (1 << 4) |
| #define GEN6_MBCTL_CTX_FETCH_NEEDED (1 << 3) |
| #define GEN6_MBCTL_BME_UPDATE_ENABLE (1 << 2) |
| #define GEN6_MBCTL_MAE_UPDATE_ENABLE (1 << 1) |
| #define GEN6_MBCTL_BOOT_FETCH_MECH (1 << 0) |
| |
| #define GEN6_GDRST _MMIO(0x941c) |
| #define GEN6_GRDOM_FULL (1 << 0) |
| #define GEN6_GRDOM_RENDER (1 << 1) |
| #define GEN6_GRDOM_MEDIA (1 << 2) |
| #define GEN6_GRDOM_BLT (1 << 3) |
| #define GEN6_GRDOM_VECS (1 << 4) |
| #define GEN9_GRDOM_GUC (1 << 5) |
| #define GEN8_GRDOM_MEDIA2 (1 << 7) |
| |
| #define RING_PP_DIR_BASE(ring) _MMIO((ring)->mmio_base+0x228) |
| #define RING_PP_DIR_BASE_READ(ring) _MMIO((ring)->mmio_base+0x518) |
| #define RING_PP_DIR_DCLV(ring) _MMIO((ring)->mmio_base+0x220) |
| #define PP_DIR_DCLV_2G 0xffffffff |
| |
| #define GEN8_RING_PDP_UDW(ring, n) _MMIO((ring)->mmio_base+0x270 + (n) * 8 + 4) |
| #define GEN8_RING_PDP_LDW(ring, n) _MMIO((ring)->mmio_base+0x270 + (n) * 8) |
| |
| #define GEN8_R_PWR_CLK_STATE _MMIO(0x20C8) |
| #define GEN8_RPCS_ENABLE (1 << 31) |
| #define GEN8_RPCS_S_CNT_ENABLE (1 << 18) |
| #define GEN8_RPCS_S_CNT_SHIFT 15 |
| #define GEN8_RPCS_S_CNT_MASK (0x7 << GEN8_RPCS_S_CNT_SHIFT) |
| #define GEN8_RPCS_SS_CNT_ENABLE (1 << 11) |
| #define GEN8_RPCS_SS_CNT_SHIFT 8 |
| #define GEN8_RPCS_SS_CNT_MASK (0x7 << GEN8_RPCS_SS_CNT_SHIFT) |
| #define GEN8_RPCS_EU_MAX_SHIFT 4 |
| #define GEN8_RPCS_EU_MAX_MASK (0xf << GEN8_RPCS_EU_MAX_SHIFT) |
| #define GEN8_RPCS_EU_MIN_SHIFT 0 |
| #define GEN8_RPCS_EU_MIN_MASK (0xf << GEN8_RPCS_EU_MIN_SHIFT) |
| |
| #define GAM_ECOCHK _MMIO(0x4090) |
| #define BDW_DISABLE_HDC_INVALIDATION (1<<25) |
| #define ECOCHK_SNB_BIT (1<<10) |
| #define ECOCHK_DIS_TLB (1<<8) |
| #define HSW_ECOCHK_ARB_PRIO_SOL (1<<6) |
| #define ECOCHK_PPGTT_CACHE64B (0x3<<3) |
| #define ECOCHK_PPGTT_CACHE4B (0x0<<3) |
| #define ECOCHK_PPGTT_GFDT_IVB (0x1<<4) |
| #define ECOCHK_PPGTT_LLC_IVB (0x1<<3) |
| #define ECOCHK_PPGTT_UC_HSW (0x1<<3) |
| #define ECOCHK_PPGTT_WT_HSW (0x2<<3) |
| #define ECOCHK_PPGTT_WB_HSW (0x3<<3) |
| |
| #define GEN8_CONFIG0 _MMIO(0xD00) |
| #define GEN9_DEFAULT_FIXES (1 << 3 | 1 << 2 | 1 << 1) |
| |
| #define GAC_ECO_BITS _MMIO(0x14090) |
| #define ECOBITS_SNB_BIT (1<<13) |
| #define ECOBITS_PPGTT_CACHE64B (3<<8) |
| #define ECOBITS_PPGTT_CACHE4B (0<<8) |
| |
| #define GAB_CTL _MMIO(0x24000) |
| #define GAB_CTL_CONT_AFTER_PAGEFAULT (1<<8) |
| |
| #define GEN6_STOLEN_RESERVED _MMIO(0x1082C0) |
| #define GEN6_STOLEN_RESERVED_ADDR_MASK (0xFFF << 20) |
| #define GEN7_STOLEN_RESERVED_ADDR_MASK (0x3FFF << 18) |
| #define GEN6_STOLEN_RESERVED_SIZE_MASK (3 << 4) |
| #define GEN6_STOLEN_RESERVED_1M (0 << 4) |
| #define GEN6_STOLEN_RESERVED_512K (1 << 4) |
| #define GEN6_STOLEN_RESERVED_256K (2 << 4) |
| #define GEN6_STOLEN_RESERVED_128K (3 << 4) |
| #define GEN7_STOLEN_RESERVED_SIZE_MASK (1 << 5) |
| #define GEN7_STOLEN_RESERVED_1M (0 << 5) |
| #define GEN7_STOLEN_RESERVED_256K (1 << 5) |
| #define GEN8_STOLEN_RESERVED_SIZE_MASK (3 << 7) |
| #define GEN8_STOLEN_RESERVED_1M (0 << 7) |
| #define GEN8_STOLEN_RESERVED_2M (1 << 7) |
| #define GEN8_STOLEN_RESERVED_4M (2 << 7) |
| #define GEN8_STOLEN_RESERVED_8M (3 << 7) |
| |
| /* VGA stuff */ |
| |
| #define VGA_ST01_MDA 0x3ba |
| #define VGA_ST01_CGA 0x3da |
| |
| #define _VGA_MSR_WRITE _MMIO(0x3c2) |
| #define VGA_MSR_WRITE 0x3c2 |
| #define VGA_MSR_READ 0x3cc |
| #define VGA_MSR_MEM_EN (1<<1) |
| #define VGA_MSR_CGA_MODE (1<<0) |
| |
| #define VGA_SR_INDEX 0x3c4 |
| #define SR01 1 |
| #define VGA_SR_DATA 0x3c5 |
| |
| #define VGA_AR_INDEX 0x3c0 |
| #define VGA_AR_VID_EN (1<<5) |
| #define VGA_AR_DATA_WRITE 0x3c0 |
| #define VGA_AR_DATA_READ 0x3c1 |
| |
| #define VGA_GR_INDEX 0x3ce |
| #define VGA_GR_DATA 0x3cf |
| /* GR05 */ |
| #define VGA_GR_MEM_READ_MODE_SHIFT 3 |
| #define VGA_GR_MEM_READ_MODE_PLANE 1 |
| /* GR06 */ |
| #define VGA_GR_MEM_MODE_MASK 0xc |
| #define VGA_GR_MEM_MODE_SHIFT 2 |
| #define VGA_GR_MEM_A0000_AFFFF 0 |
| #define VGA_GR_MEM_A0000_BFFFF 1 |
| #define VGA_GR_MEM_B0000_B7FFF 2 |
| #define VGA_GR_MEM_B0000_BFFFF 3 |
| |
| #define VGA_DACMASK 0x3c6 |
| #define VGA_DACRX 0x3c7 |
| #define VGA_DACWX 0x3c8 |
| #define VGA_DACDATA 0x3c9 |
| |
| #define VGA_CR_INDEX_MDA 0x3b4 |
| #define VGA_CR_DATA_MDA 0x3b5 |
| #define VGA_CR_INDEX_CGA 0x3d4 |
| #define VGA_CR_DATA_CGA 0x3d5 |
| |
| /* |
| * Instruction field definitions used by the command parser |
| */ |
| #define INSTR_CLIENT_SHIFT 29 |
| #define INSTR_CLIENT_MASK 0xE0000000 |
| #define INSTR_MI_CLIENT 0x0 |
| #define INSTR_BC_CLIENT 0x2 |
| #define INSTR_RC_CLIENT 0x3 |
| #define INSTR_SUBCLIENT_SHIFT 27 |
| #define INSTR_SUBCLIENT_MASK 0x18000000 |
| #define INSTR_MEDIA_SUBCLIENT 0x2 |
| #define INSTR_26_TO_24_MASK 0x7000000 |
| #define INSTR_26_TO_24_SHIFT 24 |
| |
| /* |
| * Memory interface instructions used by the kernel |
| */ |
| #define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags)) |
| /* Many MI commands use bit 22 of the header dword for GGTT vs PPGTT */ |
| #define MI_GLOBAL_GTT (1<<22) |
| |
| #define MI_NOOP MI_INSTR(0, 0) |
| #define MI_USER_INTERRUPT MI_INSTR(0x02, 0) |
| #define MI_WAIT_FOR_EVENT MI_INSTR(0x03, 0) |
| #define MI_WAIT_FOR_OVERLAY_FLIP (1<<16) |
| #define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) |
| #define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) |
| #define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) |
| #define MI_FLUSH MI_INSTR(0x04, 0) |
| #define MI_READ_FLUSH (1 << 0) |
| #define MI_EXE_FLUSH (1 << 1) |
| #define MI_NO_WRITE_FLUSH (1 << 2) |
| #define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ |
| #define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ |
| #define MI_INVALIDATE_ISP (1 << 5) /* invalidate indirect state pointers */ |
| #define MI_REPORT_HEAD MI_INSTR(0x07, 0) |
| #define MI_ARB_ON_OFF MI_INSTR(0x08, 0) |
| #define MI_ARB_ENABLE (1<<0) |
| #define MI_ARB_DISABLE (0<<0) |
| #define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0) |
| #define MI_SUSPEND_FLUSH MI_INSTR(0x0b, 0) |
| #define MI_SUSPEND_FLUSH_EN (1<<0) |
| #define MI_SET_APPID MI_INSTR(0x0e, 0) |
| #define MI_OVERLAY_FLIP MI_INSTR(0x11, 0) |
| #define MI_OVERLAY_CONTINUE (0x0<<21) |
| #define MI_OVERLAY_ON (0x1<<21) |
| #define MI_OVERLAY_OFF (0x2<<21) |
| #define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0) |
| #define MI_DISPLAY_FLIP MI_INSTR(0x14, 2) |
| #define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1) |
| #define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20) |
| /* IVB has funny definitions for which plane to flip. */ |
| #define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19) |
| #define MI_DISPLAY_FLIP_IVB_PLANE_B (1 << 19) |
| #define MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19) |
| #define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19) |
| #define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19) |
| #define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19) |
| /* SKL ones */ |
| #define MI_DISPLAY_FLIP_SKL_PLANE_1_A (0 << 8) |
| #define MI_DISPLAY_FLIP_SKL_PLANE_1_B (1 << 8) |
| #define MI_DISPLAY_FLIP_SKL_PLANE_1_C (2 << 8) |
| #define MI_DISPLAY_FLIP_SKL_PLANE_2_A (4 << 8) |
| #define MI_DISPLAY_FLIP_SKL_PLANE_2_B (5 << 8) |
| #define MI_DISPLAY_FLIP_SKL_PLANE_2_C (6 << 8) |
| #define MI_DISPLAY_FLIP_SKL_PLANE_3_A (7 << 8) |
| #define MI_DISPLAY_FLIP_SKL_PLANE_3_B (8 << 8) |
| #define MI_DISPLAY_FLIP_SKL_PLANE_3_C (9 << 8) |
| #define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1) /* gen6, gen7 */ |
| #define MI_SEMAPHORE_GLOBAL_GTT (1<<22) |
| #define MI_SEMAPHORE_UPDATE (1<<21) |
| #define MI_SEMAPHORE_COMPARE (1<<20) |
| #define MI_SEMAPHORE_REGISTER (1<<18) |
| #define MI_SEMAPHORE_SYNC_VR (0<<16) /* RCS wait for VCS (RVSYNC) */ |
| #define MI_SEMAPHORE_SYNC_VER (1<<16) /* RCS wait for VECS (RVESYNC) */ |
| #define MI_SEMAPHORE_SYNC_BR (2<<16) /* RCS wait for BCS (RBSYNC) */ |
| #define MI_SEMAPHORE_SYNC_BV (0<<16) /* VCS wait for BCS (VBSYNC) */ |
| #define MI_SEMAPHORE_SYNC_VEV (1<<16) /* VCS wait for VECS (VVESYNC) */ |
| #define MI_SEMAPHORE_SYNC_RV (2<<16) /* VCS wait for RCS (VRSYNC) */ |
| #define MI_SEMAPHORE_SYNC_RB (0<<16) /* BCS wait for RCS (BRSYNC) */ |
| #define MI_SEMAPHORE_SYNC_VEB (1<<16) /* BCS wait for VECS (BVESYNC) */ |
| #define MI_SEMAPHORE_SYNC_VB (2<<16) /* BCS wait for VCS (BVSYNC) */ |
| #define MI_SEMAPHORE_SYNC_BVE (0<<16) /* VECS wait for BCS (VEBSYNC) */ |
| #define MI_SEMAPHORE_SYNC_VVE (1<<16) /* VECS wait for VCS (VEVSYNC) */ |
| #define MI_SEMAPHORE_SYNC_RVE (2<<16) /* VECS wait for RCS (VERSYNC) */ |
| #define MI_SEMAPHORE_SYNC_INVALID (3<<16) |
| #define MI_SEMAPHORE_SYNC_MASK (3<<16) |
| #define MI_SET_CONTEXT MI_INSTR(0x18, 0) |
| #define MI_MM_SPACE_GTT (1<<8) |
| #define MI_MM_SPACE_PHYSICAL (0<<8) |
| #define MI_SAVE_EXT_STATE_EN (1<<3) |
| #define MI_RESTORE_EXT_STATE_EN (1<<2) |
| #define MI_FORCE_RESTORE (1<<1) |
| #define MI_RESTORE_INHIBIT (1<<0) |
| #define HSW_MI_RS_SAVE_STATE_EN (1<<3) |
| #define HSW_MI_RS_RESTORE_STATE_EN (1<<2) |
| #define MI_SEMAPHORE_SIGNAL MI_INSTR(0x1b, 0) /* GEN8+ */ |
| #define MI_SEMAPHORE_TARGET(engine) ((engine)<<15) |
| #define MI_SEMAPHORE_WAIT MI_INSTR(0x1c, 2) /* GEN8+ */ |
| #define MI_SEMAPHORE_POLL (1<<15) |
| #define MI_SEMAPHORE_SAD_GTE_SDD (1<<12) |
| #define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1) |
| #define MI_STORE_DWORD_IMM_GEN4 MI_INSTR(0x20, 2) |
| #define MI_MEM_VIRTUAL (1 << 22) /* 945,g33,965 */ |
| #define MI_USE_GGTT (1 << 22) /* g4x+ */ |
| #define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1) |
| #define MI_STORE_DWORD_INDEX_SHIFT 2 |
| /* Official intel docs are somewhat sloppy concerning MI_LOAD_REGISTER_IMM: |
| * - Always issue a MI_NOOP _before_ the MI_LOAD_REGISTER_IMM - otherwise hw |
| * simply ignores the register load under certain conditions. |
| * - One can actually load arbitrary many arbitrary registers: Simply issue x |
| * address/value pairs. Don't overdue it, though, x <= 2^4 must hold! |
| */ |
| #define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*(x)-1) |
| #define MI_LRI_FORCE_POSTED (1<<12) |
| #define MI_STORE_REGISTER_MEM MI_INSTR(0x24, 1) |
| #define MI_STORE_REGISTER_MEM_GEN8 MI_INSTR(0x24, 2) |
| #define MI_SRM_LRM_GLOBAL_GTT (1<<22) |
| #define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */ |
| #define MI_FLUSH_DW_STORE_INDEX (1<<21) |
| #define MI_INVALIDATE_TLB (1<<18) |
| #define MI_FLUSH_DW_OP_STOREDW (1<<14) |
| #define MI_FLUSH_DW_OP_MASK (3<<14) |
| #define MI_FLUSH_DW_NOTIFY (1<<8) |
| #define MI_INVALIDATE_BSD (1<<7) |
| #define MI_FLUSH_DW_USE_GTT (1<<2) |
| #define MI_FLUSH_DW_USE_PPGTT (0<<2) |
| #define MI_LOAD_REGISTER_MEM MI_INSTR(0x29, 1) |
| #define MI_LOAD_REGISTER_MEM_GEN8 MI_INSTR(0x29, 2) |
| #define MI_BATCH_BUFFER MI_INSTR(0x30, 1) |
| #define MI_BATCH_NON_SECURE (1) |
| /* for snb/ivb/vlv this also means "batch in ppgtt" when ppgtt is enabled. */ |
| #define MI_BATCH_NON_SECURE_I965 (1<<8) |
| #define MI_BATCH_PPGTT_HSW (1<<8) |
| #define MI_BATCH_NON_SECURE_HSW (1<<13) |
| #define MI_BATCH_BUFFER_START MI_INSTR(0x31, 0) |
| #define MI_BATCH_GTT (2<<6) /* aliased with (1<<7) on gen4 */ |
| #define MI_BATCH_BUFFER_START_GEN8 MI_INSTR(0x31, 1) |
| #define MI_BATCH_RESOURCE_STREAMER (1<<10) |
| |
| #define MI_PREDICATE_SRC0 _MMIO(0x2400) |
| #define MI_PREDICATE_SRC0_UDW _MMIO(0x2400 + 4) |
| #define MI_PREDICATE_SRC1 _MMIO(0x2408) |
| #define MI_PREDICATE_SRC1_UDW _MMIO(0x2408 + 4) |
| |
| #define MI_PREDICATE_RESULT_2 _MMIO(0x2214) |
| #define LOWER_SLICE_ENABLED (1<<0) |
| #define LOWER_SLICE_DISABLED (0<<0) |
| |
| /* |
| * 3D instructions used by the kernel |
| */ |
| #define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags)) |
| |
| #define GEN9_MEDIA_POOL_STATE ((0x3 << 29) | (0x2 << 27) | (0x5 << 16) | 4) |
| #define GEN9_MEDIA_POOL_ENABLE (1 << 31) |
| #define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) |
| #define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) |
| #define SC_UPDATE_SCISSOR (0x1<<1) |
| #define SC_ENABLE_MASK (0x1<<0) |
| #define SC_ENABLE (0x1<<0) |
| #define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) |
| #define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) |
| #define SCI_YMIN_MASK (0xffff<<16) |
| #define SCI_XMIN_MASK (0xffff<<0) |
| #define SCI_YMAX_MASK (0xffff<<16) |
| #define SCI_XMAX_MASK (0xffff<<0) |
| #define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19)) |
| #define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1) |
| #define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0) |
| #define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16)) |
| #define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4) |
| #define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0) |
| #define GFX_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) |
| #define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3)) |
| #define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) |
| |
| #define COLOR_BLT_CMD (2<<29 | 0x40<<22 | (5-2)) |
| #define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) |
| #define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) |
| #define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5) |
| #define BLT_WRITE_A (2<<20) |
| #define BLT_WRITE_RGB (1<<20) |
| #define BLT_WRITE_RGBA (BLT_WRITE_RGB | BLT_WRITE_A) |
| #define BLT_DEPTH_8 (0<<24) |
| #define BLT_DEPTH_16_565 (1<<24) |
| #define BLT_DEPTH_16_1555 (2<<24) |
| #define BLT_DEPTH_32 (3<<24) |
| #define BLT_ROP_SRC_COPY (0xcc<<16) |
| #define BLT_ROP_COLOR_COPY (0xf0<<16) |
| #define XY_SRC_COPY_BLT_SRC_TILED (1<<15) /* 965+ only */ |
| #define XY_SRC_COPY_BLT_DST_TILED (1<<11) /* 965+ only */ |
| #define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) |
| #define ASYNC_FLIP (1<<22) |
| #define DISPLAY_PLANE_A (0<<20) |
| #define DISPLAY_PLANE_B (1<<20) |
| #define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|((len)-2)) |
| #define PIPE_CONTROL_FLUSH_L3 (1<<27) |
| #define PIPE_CONTROL_GLOBAL_GTT_IVB (1<<24) /* gen7+ */ |
| #define PIPE_CONTROL_MMIO_WRITE (1<<23) |
| #define PIPE_CONTROL_STORE_DATA_INDEX (1<<21) |
| #define PIPE_CONTROL_CS_STALL (1<<20) |
| #define PIPE_CONTROL_TLB_INVALIDATE (1<<18) |
| #define PIPE_CONTROL_MEDIA_STATE_CLEAR (1<<16) |
| #define PIPE_CONTROL_QW_WRITE (1<<14) |
| #define PIPE_CONTROL_POST_SYNC_OP_MASK (3<<14) |
| #define PIPE_CONTROL_DEPTH_STALL (1<<13) |
| #define PIPE_CONTROL_WRITE_FLUSH (1<<12) |
| #define PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH (1<<12) /* gen6+ */ |
| #define PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE (1<<11) /* MBZ on Ironlake */ |
| #define PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE (1<<10) /* GM45+ only */ |
| #define PIPE_CONTROL_INDIRECT_STATE_DISABLE (1<<9) |
| #define PIPE_CONTROL_NOTIFY (1<<8) |
| #define PIPE_CONTROL_FLUSH_ENABLE (1<<7) /* gen7+ */ |
| #define PIPE_CONTROL_DC_FLUSH_ENABLE (1<<5) |
| #define PIPE_CONTROL_VF_CACHE_INVALIDATE (1<<4) |
| #define PIPE_CONTROL_CONST_CACHE_INVALIDATE (1<<3) |
| #define PIPE_CONTROL_STATE_CACHE_INVALIDATE (1<<2) |
| #define PIPE_CONTROL_STALL_AT_SCOREBOARD (1<<1) |
| #define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0) |
| #define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */ |
| |
| /* |
| * Commands used only by the command parser |
| */ |
| #define MI_SET_PREDICATE MI_INSTR(0x01, 0) |
| #define MI_ARB_CHECK MI_INSTR(0x05, 0) |
| #define MI_RS_CONTROL MI_INSTR(0x06, 0) |
| #define MI_URB_ATOMIC_ALLOC MI_INSTR(0x09, 0) |
| #define MI_PREDICATE MI_INSTR(0x0C, 0) |
| #define MI_RS_CONTEXT MI_INSTR(0x0F, 0) |
| #define MI_TOPOLOGY_FILTER MI_INSTR(0x0D, 0) |
| #define MI_LOAD_SCAN_LINES_EXCL MI_INSTR(0x13, 0) |
| #define MI_URB_CLEAR MI_INSTR(0x19, 0) |
| #define MI_UPDATE_GTT MI_INSTR(0x23, 0) |
| #define MI_CLFLUSH MI_INSTR(0x27, 0) |
| #define MI_REPORT_PERF_COUNT MI_INSTR(0x28, 0) |
| #define MI_REPORT_PERF_COUNT_GGTT (1<<0) |
| #define MI_LOAD_REGISTER_REG MI_INSTR(0x2A, 0) |
| #define MI_RS_STORE_DATA_IMM MI_INSTR(0x2B, 0) |
| #define MI_LOAD_URB_MEM MI_INSTR(0x2C, 0) |
| #define MI_STORE_URB_MEM MI_INSTR(0x2D, 0) |
| #define MI_CONDITIONAL_BATCH_BUFFER_END MI_INSTR(0x36, 0) |
| |
| #define PIPELINE_SELECT ((0x3<<29)|(0x1<<27)|(0x1<<24)|(0x4<<16)) |
| #define GFX_OP_3DSTATE_VF_STATISTICS ((0x3<<29)|(0x1<<27)|(0x0<<24)|(0xB<<16)) |
| #define MEDIA_VFE_STATE ((0x3<<29)|(0x2<<27)|(0x0<<24)|(0x0<<16)) |
| #define MEDIA_VFE_STATE_MMIO_ACCESS_MASK (0x18) |
| #define GPGPU_OBJECT ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x4<<16)) |
| #define GPGPU_WALKER ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x5<<16)) |
| #define GFX_OP_3DSTATE_DX9_CONSTANTF_VS \ |
| ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x39<<16)) |
| #define GFX_OP_3DSTATE_DX9_CONSTANTF_PS \ |
| ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x3A<<16)) |
| #define GFX_OP_3DSTATE_SO_DECL_LIST \ |
| ((0x3<<29)|(0x3<<27)|(0x1<<24)|(0x17<<16)) |
| |
| #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_VS \ |
| ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x43<<16)) |
| #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_GS \ |
| ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x44<<16)) |
| #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_HS \ |
| ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x45<<16)) |
| #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_DS \ |
| ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x46<<16)) |
| #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_PS \ |
| ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x47<<16)) |
| |
| #define MFX_WAIT ((0x3<<29)|(0x1<<27)|(0x0<<16)) |
| |
| #define COLOR_BLT ((0x2<<29)|(0x40<<22)) |
| #define SRC_COPY_BLT ((0x2<<29)|(0x43<<22)) |
| |
| /* |
| * Registers used only by the command parser |
| */ |
| #define BCS_SWCTRL _MMIO(0x22200) |
| |
| #define GPGPU_THREADS_DISPATCHED _MMIO(0x2290) |
| #define GPGPU_THREADS_DISPATCHED_UDW _MMIO(0x2290 + 4) |
| #define HS_INVOCATION_COUNT _MMIO(0x2300) |
| #define HS_INVOCATION_COUNT_UDW _MMIO(0x2300 + 4) |
| #define DS_INVOCATION_COUNT _MMIO(0x2308) |
| #define DS_INVOCATION_COUNT_UDW _MMIO(0x2308 + 4) |
| #define IA_VERTICES_COUNT _MMIO(0x2310) |
| #define IA_VERTICES_COUNT_UDW _MMIO(0x2310 + 4) |
| #define IA_PRIMITIVES_COUNT _MMIO(0x2318) |
| #define IA_PRIMITIVES_COUNT_UDW _MMIO(0x2318 + 4) |
| #define VS_INVOCATION_COUNT _MMIO(0x2320) |
| #define VS_INVOCATION_COUNT_UDW _MMIO(0x2320 + 4) |
| #define GS_INVOCATION_COUNT _MMIO(0x2328) |
| #define GS_INVOCATION_COUNT_UDW _MMIO(0x2328 + 4) |
| #define GS_PRIMITIVES_COUNT _MMIO(0x2330) |
| #define GS_PRIMITIVES_COUNT_UDW _MMIO(0x2330 + 4) |
| #define CL_INVOCATION_COUNT _MMIO(0x2338) |
| #define CL_INVOCATION_COUNT_UDW _MMIO(0x2338 + 4) |
| #define CL_PRIMITIVES_COUNT _MMIO(0x2340) |
| #define CL_PRIMITIVES_COUNT_UDW _MMIO(0x2340 + 4) |
| #define PS_INVOCATION_COUNT _MMIO(0x2348) |
| #define PS_INVOCATION_COUNT_UDW _MMIO(0x2348 + 4) |
| #define PS_DEPTH_COUNT _MMIO(0x2350) |
| #define PS_DEPTH_COUNT_UDW _MMIO(0x2350 + 4) |
| |
| /* There are the 4 64-bit counter registers, one for each stream output */ |
| #define GEN7_SO_NUM_PRIMS_WRITTEN(n) _MMIO(0x5200 + (n) * 8) |
| #define GEN7_SO_NUM_PRIMS_WRITTEN_UDW(n) _MMIO(0x5200 + (n) * 8 + 4) |
| |
| #define GEN7_SO_PRIM_STORAGE_NEEDED(n) _MMIO(0x5240 + (n) * 8) |
| #define GEN7_SO_PRIM_STORAGE_NEEDED_UDW(n) _MMIO(0x5240 + (n) * 8 + 4) |
| |
| #define GEN7_3DPRIM_END_OFFSET _MMIO(0x2420) |
| #define GEN7_3DPRIM_START_VERTEX _MMIO(0x2430) |
| #define GEN7_3DPRIM_VERTEX_COUNT _MMIO(0x2434) |
| #define GEN7_3DPRIM_INSTANCE_COUNT _MMIO(0x2438) |
| #define GEN7_3DPRIM_START_INSTANCE _MMIO(0x243C) |
| #define GEN7_3DPRIM_BASE_VERTEX _MMIO(0x2440) |
| |
| #define GEN7_GPGPU_DISPATCHDIMX _MMIO(0x2500) |
| #define GEN7_GPGPU_DISPATCHDIMY _MMIO(0x2504) |
| #define GEN7_GPGPU_DISPATCHDIMZ _MMIO(0x2508) |
| |
| /* There are the 16 64-bit CS General Purpose Registers */ |
| #define HSW_CS_GPR(n) _MMIO(0x2600 + (n) * 8) |
| #define HSW_CS_GPR_UDW(n) _MMIO(0x2600 + (n) * 8 + 4) |
| |
| #define OACONTROL _MMIO(0x2360) |
| |
| #define _GEN7_PIPEA_DE_LOAD_SL 0x70068 |
| #define _GEN7_PIPEB_DE_LOAD_SL 0x71068 |
| #define GEN7_PIPE_DE_LOAD_SL(pipe) _MMIO_PIPE(pipe, _GEN7_PIPEA_DE_LOAD_SL, _GEN7_PIPEB_DE_LOAD_SL) |
| |
| /* |
| * Reset registers |
| */ |
| #define DEBUG_RESET_I830 _MMIO(0x6070) |
| #define DEBUG_RESET_FULL (1<<7) |
| #define DEBUG_RESET_RENDER (1<<8) |
| #define DEBUG_RESET_DISPLAY (1<<9) |
| |
| /* |
| * IOSF sideband |
| */ |
| #define VLV_IOSF_DOORBELL_REQ _MMIO(VLV_DISPLAY_BASE + 0x2100) |
| #define IOSF_DEVFN_SHIFT 24 |
| #define IOSF_OPCODE_SHIFT 16 |
| #define IOSF_PORT_SHIFT 8 |
| #define IOSF_BYTE_ENABLES_SHIFT 4 |
| #define IOSF_BAR_SHIFT 1 |
| #define IOSF_SB_BUSY (1<<0) |
| #define IOSF_PORT_BUNIT 0x03 |
| #define IOSF_PORT_PUNIT 0x04 |
| #define IOSF_PORT_NC 0x11 |
| #define IOSF_PORT_DPIO 0x12 |
| #define IOSF_PORT_GPIO_NC 0x13 |
| #define IOSF_PORT_CCK 0x14 |
| #define IOSF_PORT_DPIO_2 0x1a |
| #define IOSF_PORT_FLISDSI 0x1b |
| #define IOSF_PORT_GPIO_SC 0x48 |
| #define IOSF_PORT_GPIO_SUS 0xa8 |
| #define IOSF_PORT_CCU 0xa9 |
| #define CHV_IOSF_PORT_GPIO_N 0x13 |
| #define CHV_IOSF_PORT_GPIO_SE 0x48 |
| #define CHV_IOSF_PORT_GPIO_E 0xa8 |
| #define CHV_IOSF_PORT_GPIO_SW 0xb2 |
| #define VLV_IOSF_DATA _MMIO(VLV_DISPLAY_BASE + 0x2104) |
| #define VLV_IOSF_ADDR _MMIO(VLV_DISPLAY_BASE + 0x2108) |
| |
| /* See configdb bunit SB addr map */ |
| #define BUNIT_REG_BISOC 0x11 |
| |
| #define PUNIT_REG_DSPFREQ 0x36 |
| #define DSPFREQSTAT_SHIFT_CHV 24 |
| #define DSPFREQSTAT_MASK_CHV (0x1f << DSPFREQSTAT_SHIFT_CHV) |
| #define DSPFREQGUAR_SHIFT_CHV 8 |
| #define DSPFREQGUAR_MASK_CHV (0x1f << DSPFREQGUAR_SHIFT_CHV) |
| #define DSPFREQSTAT_SHIFT 30 |
| #define DSPFREQSTAT_MASK (0x3 << DSPFREQSTAT_SHIFT) |
| #define DSPFREQGUAR_SHIFT 14 |
| #define DSPFREQGUAR_MASK (0x3 << DSPFREQGUAR_SHIFT) |
| #define DSP_MAXFIFO_PM5_STATUS (1 << 22) /* chv */ |
| #define DSP_AUTO_CDCLK_GATE_DISABLE (1 << 7) /* chv */ |
| #define DSP_MAXFIFO_PM5_ENABLE (1 << 6) /* chv */ |
| #define _DP_SSC(val, pipe) ((val) << (2 * (pipe))) |
| #define DP_SSC_MASK(pipe) _DP_SSC(0x3, (pipe)) |
| #define DP_SSC_PWR_ON(pipe) _DP_SSC(0x0, (pipe)) |
| #define DP_SSC_CLK_GATE(pipe) _DP_SSC(0x1, (pipe)) |
| #define DP_SSC_RESET(pipe) _DP_SSC(0x2, (pipe)) |
| #define DP_SSC_PWR_GATE(pipe) _DP_SSC(0x3, (pipe)) |
| #define _DP_SSS(val, pipe) ((val) << (2 * (pipe) + 16)) |
| #define DP_SSS_MASK(pipe) _DP_SSS(0x3, (pipe)) |
| #define DP_SSS_PWR_ON(pipe) _DP_SSS(0x0, (pipe)) |
| #define DP_SSS_CLK_GATE(pipe) _DP_SSS(0x1, (pipe)) |
| #define DP_SSS_RESET(pipe) _DP_SSS(0x2, (pipe)) |
| #define DP_SSS_PWR_GATE(pipe) _DP_SSS(0x3, (pipe)) |
| |
| /* See the PUNIT HAS v0.8 for the below bits */ |
| enum punit_power_well { |
| /* These numbers are fixed and must match the position of the pw bits */ |
| PUNIT_POWER_WELL_RENDER = 0, |
| PUNIT_POWER_WELL_MEDIA = 1, |
| PUNIT_POWER_WELL_DISP2D = 3, |
| PUNIT_POWER_WELL_DPIO_CMN_BC = 5, |
| PUNIT_POWER_WELL_DPIO_TX_B_LANES_01 = 6, |
| PUNIT_POWER_WELL_DPIO_TX_B_LANES_23 = 7, |
| PUNIT_POWER_WELL_DPIO_TX_C_LANES_01 = 8, |
| PUNIT_POWER_WELL_DPIO_TX_C_LANES_23 = 9, |
| PUNIT_POWER_WELL_DPIO_RX0 = 10, |
| PUNIT_POWER_WELL_DPIO_RX1 = 11, |
| PUNIT_POWER_WELL_DPIO_CMN_D = 12, |
| |
| /* Not actual bit groups. Used as IDs for lookup_power_well() */ |
| PUNIT_POWER_WELL_ALWAYS_ON, |
| }; |
| |
| enum skl_disp_power_wells { |
| /* These numbers are fixed and must match the position of the pw bits */ |
| SKL_DISP_PW_MISC_IO, |
| SKL_DISP_PW_DDI_A_E, |
| SKL_DISP_PW_DDI_B, |
| SKL_DISP_PW_DDI_C, |
| SKL_DISP_PW_DDI_D, |
| SKL_DISP_PW_1 = 14, |
| SKL_DISP_PW_2, |
| |
| /* Not actual bit groups. Used as IDs for lookup_power_well() */ |
| SKL_DISP_PW_ALWAYS_ON, |
| SKL_DISP_PW_DC_OFF, |
| |
| BXT_DPIO_CMN_A, |
| BXT_DPIO_CMN_BC, |
| }; |
| |
| #define SKL_POWER_WELL_STATE(pw) (1 << ((pw) * 2)) |
| #define SKL_POWER_WELL_REQ(pw) (1 << (((pw) * 2) + 1)) |
| |
| #define PUNIT_REG_PWRGT_CTRL 0x60 |
| #define PUNIT_REG_PWRGT_STATUS 0x61 |
| #define PUNIT_PWRGT_MASK(power_well) (3 << ((power_well) * 2)) |
| #define PUNIT_PWRGT_PWR_ON(power_well) (0 << ((power_well) * 2)) |
| #define PUNIT_PWRGT_CLK_GATE(power_well) (1 << ((power_well) * 2)) |
| #define PUNIT_PWRGT_RESET(power_well) (2 << ((power_well) * 2)) |
| #define PUNIT_PWRGT_PWR_GATE(power_well) (3 << ((power_well) * 2)) |
| |
| #define PUNIT_REG_GPU_LFM 0xd3 |
| #define PUNIT_REG_GPU_FREQ_REQ 0xd4 |
| #define PUNIT_REG_GPU_FREQ_STS 0xd8 |
| #define GPLLENABLE (1<<4) |
| #define GENFREQSTATUS (1<<0) |
| #define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc |
| #define PUNIT_REG_CZ_TIMESTAMP 0xce |
| |
| #define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */ |
| #define PUNIT_FUSE_BUS1 0xf5 /* bits 55:48 */ |
| |
| #define FB_GFX_FMAX_AT_VMAX_FUSE 0x136 |
| #define FB_GFX_FREQ_FUSE_MASK 0xff |
| #define FB_GFX_FMAX_AT_VMAX_2SS4EU_FUSE_SHIFT 24 |
| #define FB_GFX_FMAX_AT_VMAX_2SS6EU_FUSE_SHIFT 16 |
| #define FB_GFX_FMAX_AT_VMAX_2SS8EU_FUSE_SHIFT 8 |
| |
| #define FB_GFX_FMIN_AT_VMIN_FUSE 0x137 |
| #define FB_GFX_FMIN_AT_VMIN_FUSE_SHIFT 8 |
| |
| #define PUNIT_REG_DDR_SETUP2 0x139 |
| #define FORCE_DDR_FREQ_REQ_ACK (1 << 8) |
| #define FORCE_DDR_LOW_FREQ (1 << 1) |
| #define FORCE_DDR_HIGH_FREQ (1 << 0) |
| |
| #define PUNIT_GPU_STATUS_REG 0xdb |
| #define PUNIT_GPU_STATUS_MAX_FREQ_SHIFT 16 |
| #define PUNIT_GPU_STATUS_MAX_FREQ_MASK 0xff |
| #define PUNIT_GPU_STATIS_GFX_MIN_FREQ_SHIFT 8 |
| #define PUNIT_GPU_STATUS_GFX_MIN_FREQ_MASK 0xff |
| |
| #define PUNIT_GPU_DUTYCYCLE_REG 0xdf |
| #define PUNIT_GPU_DUTYCYCLE_RPE_FREQ_SHIFT 8 |
| #define PUNIT_GPU_DUTYCYCLE_RPE_FREQ_MASK 0xff |
| |
| #define IOSF_NC_FB_GFX_FREQ_FUSE 0x1c |
| #define FB_GFX_MAX_FREQ_FUSE_SHIFT 3 |
| #define FB_GFX_MAX_FREQ_FUSE_MASK 0x000007f8 |
| #define FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT 11 |
| #define FB_GFX_FGUARANTEED_FREQ_FUSE_MASK 0x0007f800 |
| #define IOSF_NC_FB_GFX_FMAX_FUSE_HI 0x34 |
| #define FB_FMAX_VMIN_FREQ_HI_MASK 0x00000007 |
| #define IOSF_NC_FB_GFX_FMAX_FUSE_LO 0x30 |
| #define FB_FMAX_VMIN_FREQ_LO_SHIFT 27 |
| #define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000 |
| |
| #define VLV_TURBO_SOC_OVERRIDE 0x04 |
| #define VLV_OVERRIDE_EN 1 |
| #define VLV_SOC_TDP_EN (1 << 1) |
| #define VLV_BIAS_CPU_125_SOC_875 (6 << 2) |
| #define CHV_BIAS_CPU_50_SOC_50 (3 << 2) |
| |
| #define VLV_CZ_CLOCK_TO_MILLI_SEC 100000 |
| |
| /* vlv2 north clock has */ |
| #define CCK_FUSE_REG 0x8 |
| #define CCK_FUSE_HPLL_FREQ_MASK 0x3 |
| #define CCK_REG_DSI_PLL_FUSE 0x44 |
| #define CCK_REG_DSI_PLL_CONTROL 0x48 |
| #define DSI_PLL_VCO_EN (1 << 31) |
| #define DSI_PLL_LDO_GATE (1 << 30) |
| #define DSI_PLL_P1_POST_DIV_SHIFT 17 |
| #define DSI_PLL_P1_POST_DIV_MASK (0x1ff << 17) |
| #define DSI_PLL_P2_MUX_DSI0_DIV2 (1 << 13) |
| #define DSI_PLL_P3_MUX_DSI1_DIV2 (1 << 12) |
| #define DSI_PLL_MUX_MASK (3 << 9) |
| #define DSI_PLL_MUX_DSI0_DSIPLL (0 << 10) |
| #define DSI_PLL_MUX_DSI0_CCK (1 << 10) |
| #define DSI_PLL_MUX_DSI1_DSIPLL (0 << 9) |
| #define DSI_PLL_MUX_DSI1_CCK (1 << 9) |
| #define DSI_PLL_CLK_GATE_MASK (0xf << 5) |
| #define DSI_PLL_CLK_GATE_DSI0_DSIPLL (1 << 8) |
| #define DSI_PLL_CLK_GATE_DSI1_DSIPLL (1 << 7) |
| #define DSI_PLL_CLK_GATE_DSI0_CCK (1 << 6) |
| #define DSI_PLL_CLK_GATE_DSI1_CCK (1 << 5) |
| #define DSI_PLL_LOCK (1 << 0) |
| #define CCK_REG_DSI_PLL_DIVIDER 0x4c |
| #define DSI_PLL_LFSR (1 << 31) |
| #define DSI_PLL_FRACTION_EN (1 << 30) |
| #define DSI_PLL_FRAC_COUNTER_SHIFT 27 |
| #define DSI_PLL_FRAC_COUNTER_MASK (7 << 27) |
| #define DSI_PLL_USYNC_CNT_SHIFT 18 |
| #define DSI_PLL_USYNC_CNT_MASK (0x1ff << 18) |
| #define DSI_PLL_N1_DIV_SHIFT 16 |
| #define DSI_PLL_N1_DIV_MASK (3 << 16) |
| #define DSI_PLL_M1_DIV_SHIFT 0 |
| #define DSI_PLL_M1_DIV_MASK (0x1ff << 0) |
| #define CCK_CZ_CLOCK_CONTROL 0x62 |
| #define CCK_GPLL_CLOCK_CONTROL 0x67 |
| #define CCK_DISPLAY_CLOCK_CONTROL 0x6b |
| #define CCK_DISPLAY_REF_CLOCK_CONTROL 0x6c |
| #define CCK_TRUNK_FORCE_ON (1 << 17) |
| #define CCK_TRUNK_FORCE_OFF (1 << 16) |
| #define CCK_FREQUENCY_STATUS (0x1f << 8) |
| #define CCK_FREQUENCY_STATUS_SHIFT 8 |
| #define CCK_FREQUENCY_VALUES (0x1f << 0) |
| |
| /** |
| * DOC: DPIO |
| * |
| * VLV, CHV and BXT have slightly peculiar display PHYs for driving DP/HDMI |
| * ports. DPIO is the name given to such a display PHY. These PHYs |
| * don't follow the standard programming model using direct MMIO |
| * registers, and instead their registers must be accessed trough IOSF |
| * sideband. VLV has one such PHY for driving ports B and C, and CHV |
| * adds another PHY for driving port D. Each PHY responds to specific |
| * IOSF-SB port. |
| * |
| * Each display PHY is made up of one or two channels. Each channel |
| * houses a common lane part which contains the PLL and other common |
| * logic. CH0 common lane also contains the IOSF-SB logic for the |
| * Common Register Interface (CRI) ie. the DPIO registers. CRI clock |
| * must be running when any DPIO registers are accessed. |
| * |
| * In addition to having their own registers, the PHYs are also |
| * controlled through some dedicated signals from the display |
| * controller. These include PLL reference clock enable, PLL enable, |
| * and CRI clock selection, for example. |
| * |
| * Eeach channel also has two splines (also called data lanes), and |
| * each spline is made up of one Physical Access Coding Sub-Layer |
| * (PCS) block and two TX lanes. So each channel has two PCS blocks |
| * and four TX lanes. The TX lanes are used as DP lanes or TMDS |
| * data/clock pairs depending on the output type. |
| * |
| * Additionally the PHY also contains an AUX lane with AUX blocks |
| * for each channel. This is used for DP AUX communication, but |
| * this fact isn't really relevant for the driver since AUX is |
| * controlled from the display controller side. No DPIO registers |
| * need to be accessed during AUX communication, |
| * |
| * Generally on VLV/CHV the common lane corresponds to the pipe and |
| * the spline (PCS/TX) corresponds to the port. |
| * |
| * For dual channel PHY (VLV/CHV): |
| * |
| * pipe A == CMN/PLL/REF CH0 |
| * |
| * pipe B == CMN/PLL/REF CH1 |
| * |
| * port B == PCS/TX CH0 |
| * |
| * port C == PCS/TX CH1 |
| * |
| * This is especially important when we cross the streams |
| * ie. drive port B with pipe B, or port C with pipe A. |
| * |
| * For single channel PHY (CHV): |
| * |
| * pipe C == CMN/PLL/REF CH0 |
| * |
| * port D == PCS/TX CH0 |
| * |
| * On BXT the entire PHY channel corresponds to the port. That means |
| * the PLL is also now associated with the port rather than the pipe, |
| * and so the clock needs to be routed to the appropriate transcoder. |
| * Port A PLL is directly connected to transcoder EDP and port B/C |
| * PLLs can be routed to any transcoder A/B/C. |
| * |
| * Note: DDI0 is digital port B, DD1 is digital port C, and DDI2 is |
| * digital port D (CHV) or port A (BXT). :: |
| * |
| * |
| * Dual channel PHY (VLV/CHV/BXT) |
| * --------------------------------- |
| * | CH0 | CH1 | |
| * | CMN/PLL/REF | CMN/PLL/REF | |
| * |---------------|---------------| Display PHY |
| * | PCS01 | PCS23 | PCS01 | PCS23 | |
| * |-------|-------|-------|-------| |
| * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3| |
| * --------------------------------- |
| * | DDI0 | DDI1 | DP/HDMI ports |
| * --------------------------------- |
| * |
| * Single channel PHY (CHV/BXT) |
| * ----------------- |
| * | CH0 | |
| * | CMN/PLL/REF | |
| * |---------------| Display PHY |
| * | PCS01 | PCS23 | |
| * |-------|-------| |
| * |TX0|TX1|TX2|TX3| |
| * ----------------- |
| * | DDI2 | DP/HDMI port |
| * ----------------- |
| */ |
| #define DPIO_DEVFN 0 |
| |
| #define DPIO_CTL _MMIO(VLV_DISPLAY_BASE + 0x2110) |
| #define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */ |
| #define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */ |
| #define DPIO_SFR_BYPASS (1<<1) |
| #define DPIO_CMNRST (1<<0) |
| |
| #define DPIO_PHY(pipe) ((pipe) >> 1) |
| #define DPIO_PHY_IOSF_PORT(phy) (dev_priv->dpio_phy_iosf_port[phy]) |
| |
| /* |
| * Per pipe/PLL DPIO regs |
| */ |
| #define _VLV_PLL_DW3_CH0 0x800c |
| #define DPIO_POST_DIV_SHIFT (28) /* 3 bits */ |
| #define DPIO_POST_DIV_DAC 0 |
| #define DPIO_POST_DIV_HDMIDP 1 /* DAC 225-400M rate */ |
| #define DPIO_POST_DIV_LVDS1 2 |
| #define DPIO_POST_DIV_LVDS2 3 |
| #define DPIO_K_SHIFT (24) /* 4 bits */ |
| #define DPIO_P1_SHIFT (21) /* 3 bits */ |
| #define DPIO_P2_SHIFT (16) /* 5 bits */ |
| #define DPIO_N_SHIFT (12) /* 4 bits */ |
| #define DPIO_ENABLE_CALIBRATION (1<<11) |
| #define DPIO_M1DIV_SHIFT (8) /* 3 bits */ |
| #define DPIO_M2DIV_MASK 0xff |
| #define _VLV_PLL_DW3_CH1 0x802c |
| #define VLV_PLL_DW3(ch) _PIPE(ch, _VLV_PLL_DW3_CH0, _VLV_PLL_DW3_CH1) |
| |
| #define _VLV_PLL_DW5_CH0 0x8014 |
| #define DPIO_REFSEL_OVERRIDE 27 |
| #define DPIO_PLL_MODESEL_SHIFT 24 /* 3 bits */ |
| #define DPIO_BIAS_CURRENT_CTL_SHIFT 21 /* 3 bits, always 0x7 */ |
| #define DPIO_PLL_REFCLK_SEL_SHIFT 16 /* 2 bits */ |
| #define DPIO_PLL_REFCLK_SEL_MASK 3 |
| #define DPIO_DRIVER_CTL_SHIFT 12 /* always set to 0x8 */ |
| #define DPIO_CLK_BIAS_CTL_SHIFT 8 /* always set to 0x5 */ |
| #define _VLV_PLL_DW5_CH1 0x8034 |
| #define VLV_PLL_DW5(ch) _PIPE(ch, _VLV_PLL_DW5_CH0, _VLV_PLL_DW5_CH1) |
| |
| #define _VLV_PLL_DW7_CH0 0x801c |
| #define _VLV_PLL_DW7_CH1 0x803c |
| #define VLV_PLL_DW7(ch) _PIPE(ch, _VLV_PLL_DW7_CH0, _VLV_PLL_DW7_CH1) |
| |
| #define _VLV_PLL_DW8_CH0 0x8040 |
| #define _VLV_PLL_DW8_CH1 0x8060 |
| #define VLV_PLL_DW8(ch) _PIPE(ch, _VLV_PLL_DW8_CH0, _VLV_PLL_DW8_CH1) |
| |
| #define VLV_PLL_DW9_BCAST 0xc044 |
| #define _VLV_PLL_DW9_CH0 0x8044 |
| #define _VLV_PLL_DW9_CH1 0x8064 |
| #define VLV_PLL_DW9(ch) _PIPE(ch, _VLV_PLL_DW9_CH0, _VLV_PLL_DW9_CH1) |
| |
| #define _VLV_PLL_DW10_CH0 0x8048 |
| #define _VLV_PLL_DW10_CH1 0x8068 |
| #define VLV_PLL_DW10(ch) _PIPE(ch, _VLV_PLL_DW10_CH0, _VLV_PLL_DW10_CH1) |
| |
| #define _VLV_PLL_DW11_CH0 0x804c |
| #define _VLV_PLL_DW11_CH1 0x806c |
| #define VLV_PLL_DW11(ch) _PIPE(ch, _VLV_PLL_DW11_CH0, _VLV_PLL_DW11_CH1) |
| |
| /* Spec for ref block start counts at DW10 */ |
| #define VLV_REF_DW13 0x80ac |
| |
| #define VLV_CMN_DW0 0x8100 |
| |
| /* |
| * Per DDI channel DPIO regs |
| */ |
| |
| #define _VLV_PCS_DW0_CH0 0x8200 |
| #define _VLV_PCS_DW0_CH1 0x8400 |
| #define DPIO_PCS_TX_LANE2_RESET (1<<16) |
| #define DPIO_PCS_TX_LANE1_RESET (1<<7) |
| #define DPIO_LEFT_TXFIFO_RST_MASTER2 (1<<4) |
| #define DPIO_RIGHT_TXFIFO_RST_MASTER2 (1<<3) |
| #define VLV_PCS_DW0(ch) _PORT(ch, _VLV_PCS_DW0_CH0, _VLV_PCS_DW0_CH1) |
| |
| #define _VLV_PCS01_DW0_CH0 0x200 |
| #define _VLV_PCS23_DW0_CH0 0x400 |
| #define _VLV_PCS01_DW0_CH1 0x2600 |
| #define _VLV_PCS23_DW0_CH1 0x2800 |
| #define VLV_PCS01_DW0(ch) _PORT(ch, _VLV_PCS01_DW0_CH0, _VLV_PCS01_DW0_CH1) |
| #define VLV_PCS23_DW0(ch) _PORT(ch, _VLV_PCS23_DW0_CH0, _VLV_PCS23_DW0_CH1) |
| |
| #define _VLV_PCS_DW1_CH0 0x8204 |
| #define _VLV_PCS_DW1_CH1 0x8404 |
| #define CHV_PCS_REQ_SOFTRESET_EN (1<<23) |
| #define DPIO_PCS_CLK_CRI_RXEB_EIOS_EN (1<<22) |
| #define DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN (1<<21) |
| #define DPIO_PCS_CLK_DATAWIDTH_SHIFT (6) |
| #define DPIO_PCS_CLK_SOFT_RESET (1<<5) |
| #define VLV_PCS_DW1(ch) _PORT(ch, _VLV_PCS_DW1_CH0, _VLV_PCS_DW1_CH1) |
| |
| #define _VLV_PCS01_DW1_CH0 0x204 |
| #define _VLV_PCS23_DW1_CH0 0x404 |
| #define _VLV_PCS01_DW1_CH1 0x2604 |
| #define _VLV_PCS23_DW1_CH1 0x2804 |
| #define VLV_PCS01_DW1(ch) _PORT(ch, _VLV_PCS01_DW1_CH0, _VLV_PCS01_DW1_CH1) |
| #define VLV_PCS23_DW1(ch) _PORT(ch, _VLV_PCS23_DW1_CH0, _VLV_PCS23_DW1_CH1) |
| |
| #define _VLV_PCS_DW8_CH0 0x8220 |
| #define _VLV_PCS_DW8_CH1 0x8420 |
| #define CHV_PCS_USEDCLKCHANNEL_OVRRIDE (1 << 20) |
| #define CHV_PCS_USEDCLKCHANNEL (1 << 21) |
| #define VLV_PCS_DW8(ch) _PORT(ch, _VLV_PCS_DW8_CH0, _VLV_PCS_DW8_CH1) |
| |
| #define _VLV_PCS01_DW8_CH0 0x0220 |
| #define _VLV_PCS23_DW8_CH0 0x0420 |
| #define _VLV_PCS01_DW8_CH1 0x2620 |
| #define _VLV_PCS23_DW8_CH1 0x2820 |
| #define VLV_PCS01_DW8(port) _PORT(port, _VLV_PCS01_DW8_CH0, _VLV_PCS01_DW8_CH1) |
| #define VLV_PCS23_DW8(port) _PORT(port, _VLV_PCS23_DW8_CH0, _VLV_PCS23_DW8_CH1) |
| |
| #define _VLV_PCS_DW9_CH0 0x8224 |
| #define _VLV_PCS_DW9_CH1 0x8424 |
| #define DPIO_PCS_TX2MARGIN_MASK (0x7<<13) |
| #define DPIO_PCS_TX2MARGIN_000 (0<<13) |
| #define DPIO_PCS_TX2MARGIN_101 (1<<13) |
| #define DPIO_PCS_TX1MARGIN_MASK (0x7<<10) |
| #define DPIO_PCS_TX1MARGIN_000 (0<<10) |
| #define DPIO_PCS_TX1MARGIN_101 (1<<10) |
| #define VLV_PCS_DW9(ch) _PORT(ch, _VLV_PCS_DW9_CH0, _VLV_PCS_DW9_CH1) |
| |
| #define _VLV_PCS01_DW9_CH0 0x224 |
| #define _VLV_PCS23_DW9_CH0 0x424 |
| #define _VLV_PCS01_DW9_CH1 0x2624 |
| #define _VLV_PCS23_DW9_CH1 0x2824 |
| #define VLV_PCS01_DW9(ch) _PORT(ch, _VLV_PCS01_DW9_CH0, _VLV_PCS01_DW9_CH1) |
| #define VLV_PCS23_DW9(ch) _PORT(ch, _VLV_PCS23_DW9_CH0, _VLV_PCS23_DW9_CH1) |
| |
| #define _CHV_PCS_DW10_CH0 0x8228 |
| #define _CHV_PCS_DW10_CH1 0x8428 |
| #define DPIO_PCS_SWING_CALC_TX0_TX2 (1<<30) |
| #define DPIO_PCS_SWING_CALC_TX1_TX3 (1<<31) |
| #define DPIO_PCS_TX2DEEMP_MASK (0xf<<24) |
| #define DPIO_PCS_TX2DEEMP_9P5 (0<<24) |
| #define DPIO_PCS_TX2DEEMP_6P0 (2<<24) |
| #define DPIO_PCS_TX1DEEMP_MASK (0xf<<16) |
| #define DPIO_PCS_TX1DEEMP_9P5 (0<<16) |
| #define DPIO_PCS_TX1DEEMP_6P0 (2<<16) |
| #define CHV_PCS_DW10(ch) _PORT(ch, _CHV_PCS_DW10_CH0, _CHV_PCS_DW10_CH1) |
| |
| #define _VLV_PCS01_DW10_CH0 0x0228 |
| #define _VLV_PCS23_DW10_CH0 0x0428 |
| #define _VLV_PCS01_DW10_CH1 0x2628 |
| #define _VLV_PCS23_DW10_CH1 0x2828 |
| #define VLV_PCS01_DW10(port) _PORT(port, _VLV_PCS01_DW10_CH0, _VLV_PCS01_DW10_CH1) |
| #define VLV_PCS23_DW10(port) _PORT(port, _VLV_PCS23_DW10_CH0, _VLV_PCS23_DW10_CH1) |
| |
| #define _VLV_PCS_DW11_CH0 0x822c |
| #define _VLV_PCS_DW11_CH1 0x842c |
| #define DPIO_TX2_STAGGER_MASK(x) ((x)<<24) |
| #define DPIO_LANEDESKEW_STRAP_OVRD (1<<3) |
| #define DPIO_LEFT_TXFIFO_RST_MASTER (1<<1) |
| #define DPIO_RIGHT_TXFIFO_RST_MASTER (1<<0) |
| #define VLV_PCS_DW11(ch) _PORT(ch, _VLV_PCS_DW11_CH0, _VLV_PCS_DW11_CH1) |
| |
| #define _VLV_PCS01_DW11_CH0 0x022c |
| #define _VLV_PCS23_DW11_CH0 0x042c |
| #define _VLV_PCS01_DW11_CH1 0x262c |
| #define _VLV_PCS23_DW11_CH1 0x282c |
| #define VLV_PCS01_DW11(ch) _PORT(ch, _VLV_PCS01_DW11_CH0, _VLV_PCS01_DW11_CH1) |
| #define VLV_PCS23_DW11(ch) _PORT(ch, _VLV_PCS23_DW11_CH0, _VLV_PCS23_DW11_CH1) |
| |
| #define _VLV_PCS01_DW12_CH0 0x0230 |
| #define _VLV_PCS23_DW12_CH0 0x0430 |
| #define _VLV_PCS01_DW12_CH1 0x2630 |
| #define _VLV_PCS23_DW12_CH1 0x2830 |
| #define VLV_PCS01_DW12(ch) _PORT(ch, _VLV_PCS01_DW12_CH0, _VLV_PCS01_DW12_CH1) |
| #define VLV_PCS23_DW12(ch) _PORT(ch, _VLV_PCS23_DW12_CH0, _VLV_PCS23_DW12_CH1) |
| |
| #define _VLV_PCS_DW12_CH0 0x8230 |
| #define _VLV_PCS_DW12_CH1 0x8430 |
| #define DPIO_TX2_STAGGER_MULT(x) ((x)<<20) |
| #define DPIO_TX1_STAGGER_MULT(x) ((x)<<16) |
| #define DPIO_TX1_STAGGER_MASK(x) ((x)<<8) |
| #define DPIO_LANESTAGGER_STRAP_OVRD (1<<6) |
| #define DPIO_LANESTAGGER_STRAP(x) ((x)<<0) |
| #define VLV_PCS_DW12(ch) _PORT(ch, _VLV_PCS_DW12_CH0, _VLV_PCS_DW12_CH1) |
| |
| #define _VLV_PCS_DW14_CH0 0x8238 |
| #define _VLV_PCS_DW14_CH1 0x8438 |
| #define VLV_PCS_DW14(ch) _PORT(ch, _VLV_PCS_DW14_CH0, _VLV_PCS_DW14_CH1) |
| |
| #define _VLV_PCS_DW23_CH0 0x825c |
| #define _VLV_PCS_DW23_CH1 0x845c |
| #define VLV_PCS_DW23(ch) _PORT(ch, _VLV_PCS_DW23_CH0, _VLV_PCS_DW23_CH1) |
| |
| #define _VLV_TX_DW2_CH0 0x8288 |
| #define _VLV_TX_DW2_CH1 0x8488 |
| #define DPIO_SWING_MARGIN000_SHIFT 16 |
| #define DPIO_SWING_MARGIN000_MASK (0xff << DPIO_SWING_MARGIN000_SHIFT) |
| #define DPIO_UNIQ_TRANS_SCALE_SHIFT 8 |
| #define VLV_TX_DW2(ch) _PORT(ch, _VLV_TX_DW2_CH0, _VLV_TX_DW2_CH1) |
| |
| #define _VLV_TX_DW3_CH0 0x828c |
| #define _VLV_TX_DW3_CH1 0x848c |
| /* The following bit for CHV phy */ |
| #define DPIO_TX_UNIQ_TRANS_SCALE_EN (1<<27) |
| #define DPIO_SWING_MARGIN101_SHIFT 16 |
| #define DPIO_SWING_MARGIN101_MASK (0xff << DPIO_SWING_MARGIN101_SHIFT) |
| #define VLV_TX_DW3(ch) _PORT(ch, _VLV_TX_DW3_CH0, _VLV_TX_DW3_CH1) |
| |
| #define _VLV_TX_DW4_CH0 0x8290 |
| #define _VLV_TX_DW4_CH1 0x8490 |
| #define DPIO_SWING_DEEMPH9P5_SHIFT 24 |
| #define DPIO_SWING_DEEMPH9P5_MASK (0xff << DPIO_SWING_DEEMPH9P5_SHIFT) |
| #define DPIO_SWING_DEEMPH6P0_SHIFT 16 |
| #define DPIO_SWING_DEEMPH6P0_MASK (0xff << DPIO_SWING_DEEMPH6P0_SHIFT) |
| #define VLV_TX_DW4(ch) _PORT(ch, _VLV_TX_DW4_CH0, _VLV_TX_DW4_CH1) |
| |
| #define _VLV_TX3_DW4_CH0 0x690 |
| #define _VLV_TX3_DW4_CH1 0x2a90 |
| #define VLV_TX3_DW4(ch) _PORT(ch, _VLV_TX3_DW4_CH0, _VLV_TX3_DW4_CH1) |
| |
| #define _VLV_TX_DW5_CH0 0x8294 |
| #define _VLV_TX_DW5_CH1 0x8494 |
| #define DPIO_TX_OCALINIT_EN (1<<31) |
| #define VLV_TX_DW5(ch) _PORT(ch, _VLV_TX_DW5_CH0, _VLV_TX_DW5_CH1) |
| |
| #define _VLV_TX_DW11_CH0 0x82ac |
| #define _VLV_TX_DW11_CH1 0x84ac |
| #define VLV_TX_DW11(ch) _PORT(ch, _VLV_TX_DW11_CH0, _VLV_TX_DW11_CH1) |
| |
| #define _VLV_TX_DW14_CH0 0x82b8 |
| #define _VLV_TX_DW14_CH1 0x84b8 |
| #define VLV_TX_DW14(ch) _PORT(ch, _VLV_TX_DW14_CH0, _VLV_TX_DW14_CH1) |
| |
| /* CHV dpPhy registers */ |
| #define _CHV_PLL_DW0_CH0 0x8000 |
| #define _CHV_PLL_DW0_CH1 0x8180 |
| #define CHV_PLL_DW0(ch) _PIPE(ch, _CHV_PLL_DW0_CH0, _CHV_PLL_DW0_CH1) |
| |
| #define _CHV_PLL_DW1_CH0 0x8004 |
| #define _CHV_PLL_DW1_CH1 0x8184 |
| #define DPIO_CHV_N_DIV_SHIFT 8 |
| #define DPIO_CHV_M1_DIV_BY_2 (0 << 0) |
| #define CHV_PLL_DW1(ch) _PIPE(ch, _CHV_PLL_DW1_CH0, _CHV_PLL_DW1_CH1) |
| |
| #define _CHV_PLL_DW2_CH0 0x8008 |
| #define _CHV_PLL_DW2_CH1 0x8188 |
| #define CHV_PLL_DW2(ch) _PIPE(ch, _CHV_PLL_DW2_CH0, _CHV_PLL_DW2_CH1) |
| |
| #define _CHV_PLL_DW3_CH0 0x800c |
| #define _CHV_PLL_DW3_CH1 0x818c |
| #define DPIO_CHV_FRAC_DIV_EN (1 << 16) |
| #define DPIO_CHV_FIRST_MOD (0 << 8) |
| #define DPIO_CHV_SECOND_MOD (1 << 8) |
| #define DPIO_CHV_FEEDFWD_GAIN_SHIFT 0 |
| #define DPIO_CHV_FEEDFWD_GAIN_MASK (0xF << 0) |
| #define CHV_PLL_DW3(ch) _PIPE(ch, _CHV_PLL_DW3_CH0, _CHV_PLL_DW3_CH1) |
| |
| #define _CHV_PLL_DW6_CH0 0x8018 |
| #define _CHV_PLL_DW6_CH1 0x8198 |
| #define DPIO_CHV_GAIN_CTRL_SHIFT 16 |
| #define DPIO_CHV_INT_COEFF_SHIFT 8 |
| #define DPIO_CHV_PROP_COEFF_SHIFT 0 |
| #define CHV_PLL_DW6(ch) _PIPE(ch, _CHV_PLL_DW6_CH0, _CHV_PLL_DW6_CH1) |
| |
| #define _CHV_PLL_DW8_CH0 0x8020 |
| #define _CHV_PLL_DW8_CH1 0x81A0 |
| #define DPIO_CHV_TDC_TARGET_CNT_SHIFT 0 |
| #define DPIO_CHV_TDC_TARGET_CNT_MASK (0x3FF << 0) |
| #define CHV_PLL_DW8(ch) _PIPE(ch, _CHV_PLL_DW8_CH0, _CHV_PLL_DW8_CH1) |
| |
| #define _CHV_PLL_DW9_CH0 0x8024 |
| #define _CHV_PLL_DW9_CH1 0x81A4 |
| #define DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT 1 /* 3 bits */ |
| #define DPIO_CHV_INT_LOCK_THRESHOLD_MASK (7 << 1) |
| #define DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE 1 /* 1: coarse & 0 : fine */ |
| #define CHV_PLL_DW9(ch) _PIPE(ch, _CHV_PLL_DW9_CH0, _CHV_PLL_DW9_CH1) |
| |
| #define _CHV_CMN_DW0_CH0 0x8100 |
| #define DPIO_ALLDL_POWERDOWN_SHIFT_CH0 19 |
| #define DPIO_ANYDL_POWERDOWN_SHIFT_CH0 18 |
| #define DPIO_ALLDL_POWERDOWN (1 << 1) |
| #define DPIO_ANYDL_POWERDOWN (1 << 0) |
| |
| #define _CHV_CMN_DW5_CH0 0x8114 |
| #define CHV_BUFRIGHTENA1_DISABLE (0 << 20) |
| #define CHV_BUFRIGHTENA1_NORMAL (1 << 20) |
| #define CHV_BUFRIGHTENA1_FORCE (3 << 20) |
| #define CHV_BUFRIGHTENA1_MASK (3 << 20) |
| #define CHV_BUFLEFTENA1_DISABLE (0 << 22) |
| #define CHV_BUFLEFTENA1_NORMAL (1 << 22) |
| #define CHV_BUFLEFTENA1_FORCE (3 << 22) |
| #define CHV_BUFLEFTENA1_MASK (3 << 22) |
| |
| #define _CHV_CMN_DW13_CH0 0x8134 |
| #define _CHV_CMN_DW0_CH1 0x8080 |
| #define DPIO_CHV_S1_DIV_SHIFT 21 |
| #define DPIO_CHV_P1_DIV_SHIFT 13 /* 3 bits */ |
| #define DPIO_CHV_P2_DIV_SHIFT 8 /* 5 bits */ |
| #define DPIO_CHV_K_DIV_SHIFT 4 |
| #define DPIO_PLL_FREQLOCK (1 << 1) |
| #define DPIO_PLL_LOCK (1 << 0) |
| #define CHV_CMN_DW13(ch) _PIPE(ch, _CHV_CMN_DW13_CH0, _CHV_CMN_DW0_CH1) |
| |
| #define _CHV_CMN_DW14_CH0 0x8138 |
| #define _CHV_CMN_DW1_CH1 0x8084 |
| #define DPIO_AFC_RECAL (1 << 14) |
| #define DPIO_DCLKP_EN (1 << 13) |
| #define CHV_BUFLEFTENA2_DISABLE (0 << 17) /* CL2 DW1 only */ |
| #define CHV_BUFLEFTENA2_NORMAL (1 << 17) /* CL2 DW1 only */ |
| #define CHV_BUFLEFTENA2_FORCE (3 << 17) /* CL2 DW1 only */ |
| #define CHV_BUFLEFTENA2_MASK (3 << 17) /* CL2 DW1 only */ |
| #define CHV_BUFRIGHTENA2_DISABLE (0 << 19) /* CL2 DW1 only */ |
| #define CHV_BUFRIGHTENA2_NORMAL (1 << 19) /* CL2 DW1 only */ |
| #define CHV_BUFRIGHTENA2_FORCE (3 << 19) /* CL2 DW1 only */ |
| #define CHV_BUFRIGHTENA2_MASK (3 << 19) /* CL2 DW1 only */ |
| #define CHV_CMN_DW14(ch) _PIPE(ch, _CHV_CMN_DW14_CH0, _CHV_CMN_DW1_CH1) |
| |
| #define _CHV_CMN_DW19_CH0 0x814c |
| #define _CHV_CMN_DW6_CH1 0x8098 |
| #define DPIO_ALLDL_POWERDOWN_SHIFT_CH1 30 /* CL2 DW6 only */ |
| #define DPIO_ANYDL_POWERDOWN_SHIFT_CH1 29 /* CL2 DW6 only */ |
| #define DPIO_DYNPWRDOWNEN_CH1 (1 << 28) /* CL2 DW6 only */ |
| #define CHV_CMN_USEDCLKCHANNEL (1 << 13) |
| |
| #define CHV_CMN_DW19(ch) _PIPE(ch, _CHV_CMN_DW19_CH0, _CHV_CMN_DW6_CH1) |
| |
| #define CHV_CMN_DW28 0x8170 |
| #define DPIO_CL1POWERDOWNEN (1 << 23) |
| #define DPIO_DYNPWRDOWNEN_CH0 (1 << 22) |
| #define DPIO_SUS_CLK_CONFIG_ON (0 << 0) |
| #define DPIO_SUS_CLK_CONFIG_CLKREQ (1 << 0) |
| #define DPIO_SUS_CLK_CONFIG_GATE (2 << 0) |
| #define DPIO_SUS_CLK_CONFIG_GATE_CLKREQ (3 << 0) |
| |
| #define CHV_CMN_DW30 0x8178 |
| #define DPIO_CL2_LDOFUSE_PWRENB (1 << 6) |
| #define DPIO_LRC_BYPASS (1 << 3) |
| |
| #define _TXLANE(ch, lane, offset) ((ch ? 0x2400 : 0) + \ |
| (lane) * 0x200 + (offset)) |
| |
| #define CHV_TX_DW0(ch, lane) _TXLANE(ch, lane, 0x80) |
| #define CHV_TX_DW1(ch, lane) _TXLANE(ch, lane, 0x84) |
| #define CHV_TX_DW2(ch, lane) _TXLANE(ch, lane, 0x88) |
| #define CHV_TX_DW3(ch, lane) _TXLANE(ch, lane, 0x8c) |
| #define CHV_TX_DW4(ch, lane) _TXLANE(ch, lane, 0x90) |
| #define CHV_TX_DW5(ch, lane) _TXLANE(ch, lane, 0x94) |
| #define CHV_TX_DW6(ch, lane) _TXLANE(ch, lane, 0x98) |
| #define CHV_TX_DW7(ch, lane) _TXLANE(ch, lane, 0x9c) |
| #define CHV_TX_DW8(ch, lane) _TXLANE(ch, lane, 0xa0) |
| #define CHV_TX_DW9(ch, lane) _TXLANE(ch, lane, 0xa4) |
| #define CHV_TX_DW10(ch, lane) _TXLANE(ch, lane, 0xa8) |
| #define CHV_TX_DW11(ch, lane) _TXLANE(ch, lane, 0xac) |
| #define DPIO_FRC_LATENCY_SHFIT 8 |
| #define CHV_TX_DW14(ch, lane) _TXLANE(ch, lane, 0xb8) |
| #define DPIO_UPAR_SHIFT 30 |
| |
| /* BXT PHY registers */ |
| #define _BXT_PHY(phy, a, b) _MMIO_PIPE((phy), (a), (b)) |
| |
| #define BXT_P_CR_GT_DISP_PWRON _MMIO(0x138090) |
| #define GT_DISPLAY_POWER_ON(phy) (1 << (phy)) |
| |
| #define _BXT_PHY_CTL_DDI_A 0x64C00 |
| #define _BXT_PHY_CTL_DDI_B 0x64C10 |
| #define _BXT_PHY_CTL_DDI_C 0x64C20 |
| #define BXT_PHY_CMNLANE_POWERDOWN_ACK (1 << 10) |
| #define BXT_PHY_LANE_POWERDOWN_ACK (1 << 9) |
| #define BXT_PHY_LANE_ENABLED (1 << 8) |
| #define BXT_PHY_CTL(port) _MMIO_PORT(port, _BXT_PHY_CTL_DDI_A, \ |
| _BXT_PHY_CTL_DDI_B) |
| |
| #define _PHY_CTL_FAMILY_EDP 0x64C80 |
| #define _PHY_CTL_FAMILY_DDI 0x64C90 |
| #define COMMON_RESET_DIS (1 << 31) |
| #define BXT_PHY_CTL_FAMILY(phy) _BXT_PHY((phy), _PHY_CTL_FAMILY_DDI, \ |
| _PHY_CTL_FAMILY_EDP) |
| |
| /* BXT PHY PLL registers */ |
| #define _PORT_PLL_A 0x46074 |
| #define _PORT_PLL_B 0x46078 |
| #define _PORT_PLL_C 0x4607c |
| #define PORT_PLL_ENABLE (1 << 31) |
| #define PORT_PLL_LOCK (1 << 30) |
| #define PORT_PLL_REF_SEL (1 << 27) |
| #define BXT_PORT_PLL_ENABLE(port) _MMIO_PORT(port, _PORT_PLL_A, _PORT_PLL_B) |
| |
| #define _PORT_PLL_EBB_0_A 0x162034 |
| #define _PORT_PLL_EBB_0_B 0x6C034 |
| #define _PORT_PLL_EBB_0_C 0x6C340 |
| #define PORT_PLL_P1_SHIFT 13 |
| #define PORT_PLL_P1_MASK (0x07 << PORT_PLL_P1_SHIFT) |
| #define PORT_PLL_P1(x) ((x) << PORT_PLL_P1_SHIFT) |
| #define PORT_PLL_P2_SHIFT 8 |
| #define PORT_PLL_P2_MASK (0x1f << PORT_PLL_P2_SHIFT) |
| #define PORT_PLL_P2(x) ((x) << PORT_PLL_P2_SHIFT) |
| #define BXT_PORT_PLL_EBB_0(port) _MMIO_PORT3(port, _PORT_PLL_EBB_0_A, \ |
| _PORT_PLL_EBB_0_B, \ |
| _PORT_PLL_EBB_0_C) |
| |
| #define _PORT_PLL_EBB_4_A 0x162038 |
| #define _PORT_PLL_EBB_4_B 0x6C038 |
| #define _PORT_PLL_EBB_4_C 0x6C344 |
| #define PORT_PLL_10BIT_CLK_ENABLE (1 << 13) |
| #define PORT_PLL_RECALIBRATE (1 << 14) |
| #define BXT_PORT_PLL_EBB_4(port) _MMIO_PORT3(port, _PORT_PLL_EBB_4_A, \ |
| _PORT_PLL_EBB_4_B, \ |
| _PORT_PLL_EBB_4_C) |
| |
| #define _PORT_PLL_0_A 0x162100 |
| #define _PORT_PLL_0_B 0x6C100 |
| #define _PORT_PLL_0_C 0x6C380 |
| /* PORT_PLL_0_A */ |
| #define PORT_PLL_M2_MASK 0xFF |
| /* PORT_PLL_1_A */ |
| #define PORT_PLL_N_SHIFT 8 |
| #define PORT_PLL_N_MASK (0x0F << PORT_PLL_N_SHIFT) |
| #define PORT_PLL_N(x) ((x) << PORT_PLL_N_SHIFT) |
| /* PORT_PLL_2_A */ |
| #define PORT_PLL_M2_FRAC_MASK 0x3FFFFF |
| /* PORT_PLL_3_A */ |
| #define PORT_PLL_M2_FRAC_ENABLE (1 << 16) |
| /* PORT_PLL_6_A */ |
| #define PORT_PLL_PROP_COEFF_MASK 0xF |
| #define PORT_PLL_INT_COEFF_MASK (0x1F << 8) |
| #define PORT_PLL_INT_COEFF(x) ((x) << 8) |
| #define PORT_PLL_GAIN_CTL_MASK (0x07 << 16) |
| #define PORT_PLL_GAIN_CTL(x) ((x) << 16) |
| /* PORT_PLL_8_A */ |
| #define PORT_PLL_TARGET_CNT_MASK 0x3FF |
| /* PORT_PLL_9_A */ |
| #define PORT_PLL_LOCK_THRESHOLD_SHIFT 1 |
| #define PORT_PLL_LOCK_THRESHOLD_MASK (0x7 << PORT_PLL_LOCK_THRESHOLD_SHIFT) |
| /* PORT_PLL_10_A */ |
| #define PORT_PLL_DCO_AMP_OVR_EN_H (1<<27) |
| #define PORT_PLL_DCO_AMP_DEFAULT 15 |
| #define PORT_PLL_DCO_AMP_MASK 0x3c00 |
| #define PORT_PLL_DCO_AMP(x) ((x)<<10) |
| #define _PORT_PLL_BASE(port) _PORT3(port, _PORT_PLL_0_A, \ |
| _PORT_PLL_0_B, \ |
| _PORT_PLL_0_C) |
| #define BXT_PORT_PLL(port, idx) _MMIO(_PORT_PLL_BASE(port) + (idx) * 4) |
| |
| /* BXT PHY common lane registers */ |
| #define _PORT_CL1CM_DW0_A 0x162000 |
| #define _PORT_CL1CM_DW0_BC 0x6C000 |
| #define PHY_POWER_GOOD (1 << 16) |
| #define PHY_RESERVED (1 << 7) |
| #define BXT_PORT_CL1CM_DW0(phy) _BXT_PHY((phy), _PORT_CL1CM_DW0_BC, \ |
| _PORT_CL1CM_DW0_A) |
| |
| #define _PORT_CL1CM_DW9_A 0x162024 |
| #define _PORT_CL1CM_DW9_BC 0x6C024 |
| #define IREF0RC_OFFSET_SHIFT 8 |
| #define IREF0RC_OFFSET_MASK (0xFF << IREF0RC_OFFSET_SHIFT) |
| #define BXT_PORT_CL1CM_DW9(phy) _BXT_PHY((phy), _PORT_CL1CM_DW9_BC, \ |
| _PORT_CL1CM_DW9_A) |
| |
| #define _PORT_CL1CM_DW10_A 0x162028 |
| #define _PORT_CL1CM_DW10_BC 0x6C028 |
| #define IREF1RC_OFFSET_SHIFT 8 |
| #define IREF1RC_OFFSET_MASK (0xFF << IREF1RC_OFFSET_SHIFT) |
| #define BXT_PORT_CL1CM_DW10(phy) _BXT_PHY((phy), _PORT_CL1CM_DW10_BC, \ |
| _PORT_CL1CM_DW10_A) |
| |
| #define _PORT_CL1CM_DW28_A 0x162070 |
| #define _PORT_CL1CM_DW28_BC 0x6C070 |
| #define OCL1_POWER_DOWN_EN (1 << 23) |
| #define DW28_OLDO_DYN_PWR_DOWN_EN (1 << 22) |
| #define SUS_CLK_CONFIG 0x3 |
| #define BXT_PORT_CL1CM_DW28(phy) _BXT_PHY((phy), _PORT_CL1CM_DW28_BC, \ |
| _PORT_CL1CM_DW28_A) |
| |
| #define _PORT_CL1CM_DW30_A 0x162078 |
| #define _PORT_CL1CM_DW30_BC 0x6C078 |
| #define OCL2_LDOFUSE_PWR_DIS (1 << 6) |
| #define BXT_PORT_CL1CM_DW30(phy) _BXT_PHY((phy), _PORT_CL1CM_DW30_BC, \ |
| _PORT_CL1CM_DW30_A) |
| |
| /* Defined for PHY0 only */ |
| #define BXT_PORT_CL2CM_DW6_BC _MMIO(0x6C358) |
| #define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28) |
| |
| /* BXT PHY Ref registers */ |
| #define _PORT_REF_DW3_A 0x16218C |
| #define _PORT_REF_DW3_BC 0x6C18C |
| #define GRC_DONE (1 << 22) |
| #define BXT_PORT_REF_DW3(phy) _BXT_PHY((phy), _PORT_REF_DW3_BC, \ |
| _PORT_REF_DW3_A) |
| |
| #define _PORT_REF_DW6_A 0x162198 |
| #define _PORT_REF_DW6_BC 0x6C198 |
| #define GRC_CODE_SHIFT 24 |
| #define GRC_CODE_MASK (0xFF << GRC_CODE_SHIFT) |
| #define GRC_CODE_FAST_SHIFT 16 |
| #define GRC_CODE_FAST_MASK (0xFF << GRC_CODE_FAST_SHIFT) |
| #define GRC_CODE_SLOW_SHIFT 8 |
| #define GRC_CODE_SLOW_MASK (0xFF << GRC_CODE_SLOW_SHIFT) |
| #define GRC_CODE_NOM_MASK 0xFF |
| #define BXT_PORT_REF_DW6(phy) _BXT_PHY((phy), _PORT_REF_DW6_BC, \ |
| _PORT_REF_DW6_A) |
| |
| #define _PORT_REF_DW8_A 0x1621A0 |
| #define _PORT_REF_DW8_BC 0x6C1A0 |
| #define GRC_DIS (1 << 15) |
| #define GRC_RDY_OVRD (1 << 1) |
| #define BXT_PORT_REF_DW8(phy) _BXT_PHY((phy), _PORT_REF_DW8_BC, \ |
| _PORT_REF_DW8_A) |
| |
| /* BXT PHY PCS registers */ |
| #define _PORT_PCS_DW10_LN01_A 0x162428 |
| #define _PORT_PCS_DW10_LN01_B 0x6C428 |
| #define _PORT_PCS_DW10_LN01_C 0x6C828 |
| #define _PORT_PCS_DW10_GRP_A 0x162C28 |
| #define _PORT_PCS_DW10_GRP_B 0x6CC28 |
| #define _PORT_PCS_DW10_GRP_C 0x6CE28 |
| #define BXT_PORT_PCS_DW10_LN01(port) _MMIO_PORT3(port, _PORT_PCS_DW10_LN01_A, \ |
| _PORT_PCS_DW10_LN01_B, \ |
| _PORT_PCS_DW10_LN01_C) |
| #define BXT_PORT_PCS_DW10_GRP(port) _MMIO_PORT3(port, _PORT_PCS_DW10_GRP_A, \ |
| _PORT_PCS_DW10_GRP_B, \ |
| _PORT_PCS_DW10_GRP_C) |
| #define TX2_SWING_CALC_INIT (1 << 31) |
| #define TX1_SWING_CALC_INIT (1 << 30) |
| |
| #define _PORT_PCS_DW12_LN01_A 0x162430 |
| #define _PORT_PCS_DW12_LN01_B 0x6C430 |
| #define _PORT_PCS_DW12_LN01_C 0x6C830 |
| #define _PORT_PCS_DW12_LN23_A 0x162630 |
| #define _PORT_PCS_DW12_LN23_B 0x6C630 |
| #define _PORT_PCS_DW12_LN23_C 0x6CA30 |
| #define _PORT_PCS_DW12_GRP_A 0x162c30 |
| #define _PORT_PCS_DW12_GRP_B 0x6CC30 |
| #define _PORT_PCS_DW12_GRP_C 0x6CE30 |
| #define LANESTAGGER_STRAP_OVRD (1 << 6) |
| #define LANE_STAGGER_MASK 0x1F |
| #define BXT_PORT_PCS_DW12_LN01(port) _MMIO_PORT3(port, _PORT_PCS_DW12_LN01_A, \ |
| _PORT_PCS_DW12_LN01_B, \ |
| _PORT_PCS_DW12_LN01_C) |
| #define BXT_PORT_PCS_DW12_LN23(port) _MMIO_PORT3(port, _PORT_PCS_DW12_LN23_A, \ |
| _PORT_PCS_DW12_LN23_B, \ |
| _PORT_PCS_DW12_LN23_C) |
| #define BXT_PORT_PCS_DW12_GRP(port) _MMIO_PORT3(port, _PORT_PCS_DW12_GRP_A, \ |
| _PORT_PCS_DW12_GRP_B, \ |
| _PORT_PCS_DW12_GRP_C) |
| |
| /* BXT PHY TX registers */ |
| #define _BXT_LANE_OFFSET(lane) (((lane) >> 1) * 0x200 + \ |
| ((lane) & 1) * 0x80) |
| |
| #define _PORT_TX_DW2_LN0_A 0x162508 |
| #define _PORT_TX_DW2_LN0_B 0x6C508 |
| #define _PORT_TX_DW2_LN0_C 0x6C908 |
| #define _PORT_TX_DW2_GRP_A 0x162D08 |
| #define _PORT_TX_DW2_GRP_B 0x6CD08 |
| #define _PORT_TX_DW2_GRP_C 0x6CF08 |
| #define BXT_PORT_TX_DW2_GRP(port) _MMIO_PORT3(port, _PORT_TX_DW2_GRP_A, \ |
| _PORT_TX_DW2_GRP_B, \ |
| _PORT_TX_DW2_GRP_C) |
| #define BXT_PORT_TX_DW2_LN0(port) _MMIO_PORT3(port, _PORT_TX_DW2_LN0_A, \ |
| _PORT_TX_DW2_LN0_B, \ |
| _PORT_TX_DW2_LN0_C) |
| #define MARGIN_000_SHIFT 16 |
| #define MARGIN_000 (0xFF << MARGIN_000_SHIFT) |
| #define UNIQ_TRANS_SCALE_SHIFT 8 |
| #define UNIQ_TRANS_SCALE (0xFF << UNIQ_TRANS_SCALE_SHIFT) |
| |
| #define _PORT_TX_DW3_LN0_A 0x16250C |
| #define _PORT_TX_DW3_LN0_B 0x6C50C |
| #define _PORT_TX_DW3_LN0_C 0x6C90C |
| #define _PORT_TX_DW3_GRP_A 0x162D0C |
| #define _PORT_TX_DW3_GRP_B 0x6CD0C |
| #define _PORT_TX_DW3_GRP_C 0x6CF0C |
| #define BXT_PORT_TX_DW3_GRP(port) _MMIO_PORT3(port, _PORT_TX_DW3_GRP_A, \ |
| _PORT_TX_DW3_GRP_B, \ |
| _PORT_TX_DW3_GRP_C) |
| #define BXT_PORT_TX_DW3_LN0(port) _MMIO_PORT3(port, _PORT_TX_DW3_LN0_A, \ |
| _PORT_TX_DW3_LN0_B, \ |
| _PORT_TX_DW3_LN0_C) |
| #define SCALE_DCOMP_METHOD (1 << 26) |
| #define UNIQUE_TRANGE_EN_METHOD (1 << 27) |
| |
| #define _PORT_TX_DW4_LN0_A 0x162510 |
| #define _PORT_TX_DW4_LN0_B 0x6C510 |
| #define _PORT_TX_DW4_LN0_C 0x6C910 |
| #define _PORT_TX_DW4_GRP_A 0x162D10 |
| #define _PORT_TX_DW4_GRP_B 0x6CD10 |
| #define _PORT_TX_DW4_GRP_C 0x6CF10 |
| #define BXT_PORT_TX_DW4_LN0(port) _MMIO_PORT3(port, _PORT_TX_DW4_LN0_A, \ |
| _PORT_TX_DW4_LN0_B, \ |
| _PORT_TX_DW4_LN0_C) |
| #define BXT_PORT_TX_DW4_GRP(port) _MMIO_PORT3(port, _PORT_TX_DW4_GRP_A, \ |
| _PORT_TX_DW4_GRP_B, \ |
| _PORT_TX_DW4_GRP_C) |
| #define DEEMPH_SHIFT 24 |
| #define DE_EMPHASIS (0xFF << DEEMPH_SHIFT) |
| |
| #define _PORT_TX_DW14_LN0_A 0x162538 |
| #define _PORT_TX_DW14_LN0_B 0x6C538 |
| #define _PORT_TX_DW14_LN0_C 0x6C938 |
| #define LATENCY_OPTIM_SHIFT 30 |
| #define LATENCY_OPTIM (1 << LATENCY_OPTIM_SHIFT) |
| #define BXT_PORT_TX_DW14_LN(port, lane) _MMIO(_PORT3((port), _PORT_TX_DW14_LN0_A, \ |
| _PORT_TX_DW14_LN0_B, \ |
| _PORT_TX_DW14_LN0_C) + \ |
| _BXT_LANE_OFFSET(lane)) |
| |
| /* UAIMI scratch pad register 1 */ |
| #define UAIMI_SPR1 _MMIO(0x4F074) |
| /* SKL VccIO mask */ |
| #define SKL_VCCIO_MASK 0x1 |
| /* SKL balance leg register */ |
| #define DISPIO_CR_TX_BMU_CR0 _MMIO(0x6C00C) |
| /* I_boost values */ |
| #define BALANCE_LEG_SHIFT(port) (8+3*(port)) |
| #define BALANCE_LEG_MASK(port) (7<<(8+3*(port))) |
| /* Balance leg disable bits */ |
| #define BALANCE_LEG_DISABLE_SHIFT 23 |
| |
| /* |
| * Fence registers |
| * [0-7] @ 0x2000 gen2,gen3 |
| * [8-15] @ 0x3000 945,g33,pnv |
| * |
| * [0-15] @ 0x3000 gen4,gen5 |
| * |
| * [0-15] @ 0x100000 gen6,vlv,chv |
| * [0-31] @ 0x100000 gen7+ |
| */ |
| #define FENCE_REG(i) _MMIO(0x2000 + (((i) & 8) << 9) + ((i) & 7) * 4) |
| #define I830_FENCE_START_MASK 0x07f80000 |
| #define I830_FENCE_TILING_Y_SHIFT 12 |
| #define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) |
| #define I830_FENCE_PITCH_SHIFT 4 |
| #define I830_FENCE_REG_VALID (1<<0) |
| #define I915_FENCE_MAX_PITCH_VAL 4 |
| #define I830_FENCE_MAX_PITCH_VAL 6 |
| #define I830_FENCE_MAX_SIZE_VAL (1<<8) |
| |
| #define I915_FENCE_START_MASK 0x0ff00000 |
| #define I915_FENCE_SIZE_BITS(size) ((ffs((size) >> 20) - 1) << 8) |
| |
| #define FENCE_REG_965_LO(i) _MMIO(0x03000 + (i) * 8) |
| #define FENCE_REG_965_HI(i) _MMIO(0x03000 + (i) * 8 + 4) |
| #define I965_FENCE_PITCH_SHIFT 2 |
| #define I965_FENCE_TILING_Y_SHIFT 1 |
| #define I965_FENCE_REG_VALID (1<<0) |
| #define I965_FENCE_MAX_PITCH_VAL 0x0400 |
| |
| #define FENCE_REG_GEN6_LO(i) _MMIO(0x100000 + (i) * 8) |
| #define FENCE_REG_GEN6_HI(i) _MMIO(0x100000 + (i) * 8 + 4) |
| #define GEN6_FENCE_PITCH_SHIFT 32 |
| #define GEN7_FENCE_MAX_PITCH_VAL 0x0800 |
| |
| |
| /* control register for cpu gtt access */ |
| #define TILECTL _MMIO(0x101000) |
| #define TILECTL_SWZCTL (1 << 0) |
| #define TILECTL_TLBPF (1 << 1) |
| #define TILECTL_TLB_PREFETCH_DIS (1 << 2) |
| #define TILECTL_BACKSNOOP_DIS (1 << 3) |
| |
| /* |
| * Instruction and interrupt control regs |
| */ |
| #define PGTBL_CTL _MMIO(0x02020) |
| #define PGTBL_ADDRESS_LO_MASK 0xfffff000 /* bits [31:12] */ |
| #define PGTBL_ADDRESS_HI_MASK 0x000000f0 /* bits [35:32] (gen4) */ |
| #define PGTBL_ER _MMIO(0x02024) |
| #define PRB0_BASE (0x2030-0x30) |
| #define PRB1_BASE (0x2040-0x30) /* 830,gen3 */ |
| #define PRB2_BASE (0x2050-0x30) /* gen3 */ |
| #define SRB0_BASE (0x2100-0x30) /* gen2 */ |
| #define SRB1_BASE (0x2110-0x30) /* gen2 */ |
| #define SRB2_BASE (0x2120-0x30) /* 830 */ |
| #define SRB3_BASE (0x2130-0x30) /* 830 */ |
| #define RENDER_RING_BASE 0x02000 |
| #define BSD_RING_BASE 0x04000 |
| #define GEN6_BSD_RING_BASE 0x12000 |
| #define GEN8_BSD2_RING_BASE 0x1c000 |
| #define VEBOX_RING_BASE 0x1a000 |
| #define BLT_RING_BASE 0x22000 |
| #define RING_TAIL(base) _MMIO((base)+0x30) |
| #define RING_HEAD(base) _MMIO((base)+0x34) |
| #define RING_START(base) _MMIO((base)+0x38) |
| #define RING_CTL(base) _MMIO((base)+0x3c) |
| #define RING_SYNC_0(base) _MMIO((base)+0x40) |
| #define RING_SYNC_1(base) _MMIO((base)+0x44) |
| #define RING_SYNC_2(base) _MMIO((base)+0x48) |
| #define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE)) |
| #define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE)) |
| #define GEN6_RVESYNC (RING_SYNC_2(RENDER_RING_BASE)) |
| #define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE)) |
| #define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE)) |
| #define GEN6_VVESYNC (RING_SYNC_2(GEN6_BSD_RING_BASE)) |
| #define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE)) |
| #define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE)) |
| #define GEN6_BVESYNC (RING_SYNC_2(BLT_RING_BASE)) |
| #define GEN6_VEBSYNC (RING_SYNC_0(VEBOX_RING_BASE)) |
| #define GEN6_VERSYNC (RING_SYNC_1(VEBOX_RING_BASE)) |
| #define GEN6_VEVSYNC (RING_SYNC_2(VEBOX_RING_BASE)) |
| #define GEN6_NOSYNC INVALID_MMIO_REG |
| #define RING_PSMI_CTL(base) _MMIO((base)+0x50) |
| #define RING_MAX_IDLE(base) _MMIO((base)+0x54) |
| #define RING_HWS_PGA(base) _MMIO((base)+0x80) |
| #define RING_HWS_PGA_GEN6(base) _MMIO((base)+0x2080) |
| #define RING_RESET_CTL(base) _MMIO((base)+0xd0) |
| #define RESET_CTL_REQUEST_RESET (1 << 0) |
| #define RESET_CTL_READY_TO_RESET (1 << 1) |
| |
| #define HSW_GTT_CACHE_EN _MMIO(0x4024) |
| #define GTT_CACHE_EN_ALL 0xF0007FFF |
| #define GEN7_WR_WATERMARK _MMIO(0x4028) |
| #define GEN7_GFX_PRIO_CTRL _MMIO(0x402C) |
| #define ARB_MODE _MMIO(0x4030) |
| #define ARB_MODE_SWIZZLE_SNB (1<<4) |
| #define ARB_MODE_SWIZZLE_IVB (1<<5) |
| #define GEN7_GFX_PEND_TLB0 _MMIO(0x4034) |
| #define GEN7_GFX_PEND_TLB1 _MMIO(0x4038) |
| /* L3, CVS, ZTLB, RCC, CASC LRA min, max values */ |
| #define GEN7_LRA_LIMITS(i) _MMIO(0x403C + (i) * 4) |
| #define GEN7_LRA_LIMITS_REG_NUM 13 |
| #define GEN7_MEDIA_MAX_REQ_COUNT _MMIO(0x4070) |
| #define GEN7_GFX_MAX_REQ_COUNT _MMIO(0x4074) |
| |
| #define GAMTARBMODE _MMIO(0x04a08) |
| #define ARB_MODE_BWGTLB_DISABLE (1<<9) |
| #define ARB_MODE_SWIZZLE_BDW (1<<1) |
| #define RENDER_HWS_PGA_GEN7 _MMIO(0x04080) |
| #define RING_FAULT_REG(ring) _MMIO(0x4094 + 0x100*(ring)->id) |
| #define RING_FAULT_GTTSEL_MASK (1<<11) |
| #define RING_FAULT_SRCID(x) (((x) >> 3) & 0xff) |
| #define RING_FAULT_FAULT_TYPE(x) (((x) >> 1) & 0x3) |
| #define RING_FAULT_VALID (1<<0) |
| #define DONE_REG _MMIO(0x40b0) |
| #define GEN8_PRIVATE_PAT_LO _MMIO(0x40e0) |
| #define GEN8_PRIVATE_PAT_HI _MMIO(0x40e0 + 4) |
| #define BSD_HWS_PGA_GEN7 _MMIO(0x04180) |
| #define BLT_HWS_PGA_GEN7 _MMIO(0x04280) |
| #define VEBOX_HWS_PGA_GEN7 _MMIO(0x04380) |
| #define RING_ACTHD(base) _MMIO((base)+0x74) |
| #define RING_ACTHD_UDW(base) _MMIO((base)+0x5c) |
| #define RING_NOPID(base) _MMIO((base)+0x94) |
| #define RING_IMR(base) _MMIO((base)+0xa8) |
| #define RING_HWSTAM(base) _MMIO((base)+0x98) |
| #define RING_TIMESTAMP(base) _MMIO((base)+0x358) |
| #define RING_TIMESTAMP_UDW(base) _MMIO((base)+0x358 + 4) |
| #define TAIL_ADDR 0x001FFFF8 |
| #define HEAD_WRAP_COUNT 0xFFE00000 |
| #define HEAD_WRAP_ONE 0x00200000 |
| #define HEAD_ADDR 0x001FFFFC |
| #define RING_NR_PAGES 0x001FF000 |
| #define RING_REPORT_MASK 0x00000006 |
| #define RING_REPORT_64K 0x00000002 |
| #define RING_REPORT_128K 0x00000004 |
| #define RING_NO_REPORT 0x00000000 |
| #define RING_VALID_MASK 0x00000001 |
| #define RING_VALID 0x00000001 |
| #define RING_INVALID 0x00000000 |
| #define RING_WAIT_I8XX (1<<0) /* gen2, PRBx_HEAD */ |
| #define RING_WAIT (1<<11) /* gen3+, PRBx_CTL */ |
| #define RING_WAIT_SEMAPHORE (1<<10) /* gen6+ */ |
| |
| #define RING_FORCE_TO_NONPRIV(base, i) _MMIO(((base)+0x4D0) + (i)*4) |
| #define RING_MAX_NONPRIV_SLOTS 12 |
| |
| #define GEN7_TLB_RD_ADDR _MMIO(0x4700) |
| |
| #define GEN9_GAMT_ECO_REG_RW_IA _MMIO(0x4ab0) |
| #define GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS (1<<18) |
| |
| #define GAMT_CHKN_BIT_REG _MMIO(0x4ab8) |
| #define GAMT_CHKN_DISABLE_DYNAMIC_CREDIT_SHARING (1<<28) |
| |
| #if 0 |
| #define PRB0_TAIL _MMIO(0x2030) |
| #define PRB0_HEAD _MMIO(0x2034) |
| #define PRB0_START _MMIO(0x2038) |
| #define PRB0_CTL _MMIO(0x203c) |
| #define PRB1_TAIL _MMIO(0x2040) /* 915+ only */ |
| #define PRB1_HEAD _MMIO(0x2044) /* 915+ only */ |
| #define PRB1_START _MMIO(0x2048) /* 915+ only */ |
| #define PRB1_CTL _MMIO(0x204c) /* 915+ only */ |
| #endif |
| #define IPEIR_I965 _MMIO(0x2064) |
| #define IPEHR_I965 _MMIO(0x2068) |
| #define GEN7_SC_INSTDONE _MMIO(0x7100) |
| #define GEN7_SAMPLER_INSTDONE _MMIO(0xe160) |
| #define GEN7_ROW_INSTDONE _MMIO(0xe164) |
| #define I915_NUM_INSTDONE_REG 4 |
| #define RING_IPEIR(base) _MMIO((base)+0x64) |
| #define RING_IPEHR(base) _MMIO((base)+0x68) |
| /* |
| * On GEN4, only the render ring INSTDONE exists and has a different |
| * layout than the GEN7+ version. |
| * The GEN2 counterpart of this register is GEN2_INSTDONE. |
| */ |
| #define RING_INSTDONE(base) _MMIO((base)+0x6c) |
| #define RING_INSTPS(base) _MMIO((base)+0x70) |
| #define RING_DMA_FADD(base) _MMIO((base)+0x78) |
| #define RING_DMA_FADD_UDW(base) _MMIO((base)+0x60) /* gen8+ */ |
| #define RING_INSTPM(base) _MMIO((base)+0xc0) |
| #define RING_MI_MODE(base) _MMIO((base)+0x9c) |
| #define INSTPS _MMIO(0x2070) /* 965+ only */ |
| #define GEN4_INSTDONE1 _MMIO(0x207c) /* 965+ only, aka INSTDONE_2 on SNB */ |
| #define ACTHD_I965 _MMIO(0x2074) |
| #define HWS_PGA _MMIO(0x2080) |
| #define HWS_ADDRESS_MASK 0xfffff000 |
| #define HWS_START_ADDRESS_SHIFT 4 |
| #define PWRCTXA _MMIO(0x2088) /* 965GM+ only */ |
| #define PWRCTX_EN (1<<0) |
| #define IPEIR _MMIO(0x2088) |
| #define IPEHR _MMIO(0x208c) |
| #define GEN2_INSTDONE _MMIO(0x2090) |
| #define NOPID _MMIO(0x2094) |
| #define HWSTAM _MMIO(0x2098) |
| #define DMA_FADD_I8XX _MMIO(0x20d0) |
| #define RING_BBSTATE(base) _MMIO((base)+0x110) |
| #define RING_BB_PPGTT (1 << 5) |
| #define RING_SBBADDR(base) _MMIO((base)+0x114) /* hsw+ */ |
| #define RING_SBBSTATE(base) _MMIO((base)+0x118) /* hsw+ */ |
| #define RING_SBBADDR_UDW(base) _MMIO((base)+0x11c) /* gen8+ */ |
| #define RING_BBADDR(base) _MMIO((base)+0x140) |
| #define RING_BBADDR_UDW(base) _MMIO((base)+0x168) /* gen8+ */ |
| #define RING_BB_PER_CTX_PTR(base) _MMIO((base)+0x1c0) /* gen8+ */ |
| #define RING_INDIRECT_CTX(base) _MMIO((base)+0x1c4) /* gen8+ */ |
| #define RING_INDIRECT_CTX_OFFSET(base) _MMIO((base)+0x1c8) /* gen8+ */ |
| #define RING_CTX_TIMESTAMP(base) _MMIO((base)+0x3a8) /* gen8+ */ |
| |
| #define ERROR_GEN6 _MMIO(0x40a0) |
| #define GEN7_ERR_INT _MMIO(0x44040) |
| #define ERR_INT_POISON (1<<31) |
| #define ERR_INT_MMIO_UNCLAIMED (1<<13) |
| #define ERR_INT_PIPE_CRC_DONE_C (1<<8) |
| #define ERR_INT_FIFO_UNDERRUN_C (1<<6) |
| #define ERR_INT_PIPE_CRC_DONE_B (1<<5) |
| #define ERR_INT_FIFO_UNDERRUN_B (1<<3) |
| #define ERR_INT_PIPE_CRC_DONE_A (1<<2) |
| #define ERR_INT_PIPE_CRC_DONE(pipe) (1<<(2 + (pipe)*3)) |
| #define ERR_INT_FIFO_UNDERRUN_A (1<<0) |
| #define ERR_INT_FIFO_UNDERRUN(pipe) (1<<((pipe)*3)) |
| |
| #define GEN8_FAULT_TLB_DATA0 _MMIO(0x4b10) |
| #define GEN8_FAULT_TLB_DATA1 _MMIO(0x4b14) |
| |
| #define FPGA_DBG _MMIO(0x42300) |
| #define FPGA_DBG_RM_NOCLAIM (1<<31) |
| |
| #define CLAIM_ER _MMIO(VLV_DISPLAY_BASE + 0x2028) |
| #define CLAIM_ER_CLR (1 << 31) |
| #define CLAIM_ER_OVERFLOW (1 << 16) |
| #define CLAIM_ER_CTR_MASK 0xffff |
| |
| #define DERRMR _MMIO(0x44050) |
| /* Note that HBLANK events are reserved on bdw+ */ |
| #define DERRMR_PIPEA_SCANLINE (1<<0) |
| #define DERRMR_PIPEA_PRI_FLIP_DONE (1<<1) |
| #define DERRMR_PIPEA_SPR_FLIP_DONE (1<<2) |
| #define DERRMR_PIPEA_VBLANK (1<<3) |
| #define DERRMR_PIPEA_HBLANK (1<<5) |
| #define DERRMR_PIPEB_SCANLINE (1<<8) |
| #define DERRMR_PIPEB_PRI_FLIP_DONE (1<<9) |
| #define DERRMR_PIPEB_SPR_FLIP_DONE (1<<10) |
| #define DERRMR_PIPEB_VBLANK (1<<11) |
| #define DERRMR_PIPEB_HBLANK (1<<13) |
| /* Note that PIPEC is not a simple translation of PIPEA/PIPEB */ |
| #define DERRMR_PIPEC_SCANLINE (1<<14) |
| #define DERRMR_PIPEC_PRI_FLIP_DONE (1<<15) |
| #define DERRMR_PIPEC_SPR_FLIP_DONE (1<<20) |
| #define DERRMR_PIPEC_VBLANK (1<<21) |
| #define DERRMR_PIPEC_HBLANK (1<<22) |
| |
| |
| /* GM45+ chicken bits -- debug workaround bits that may be required |
| * for various sorts of correct behavior. The top 16 bits of each are |
| * the enables for writing to the corresponding low bit. |
| */ |
| #define _3D_CHICKEN _MMIO(0x2084) |
| #define _3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB (1 << 10) |
| #define _3D_CHICKEN2 _MMIO(0x208c) |
| /* Disables pipelining of read flushes past the SF-WIZ interface. |
| * Required on all Ironlake steppings according to the B-Spec, but the |
| * particular danger of not doing so is not specified. |
| */ |
| # define _3D_CHICKEN2_WM_READ_PIPELINED (1 << 14) |
| #define _3D_CHICKEN3 _MMIO(0x2090) |
| #define _3D_CHICKEN_SF_DISABLE_OBJEND_CULL (1 << 10) |
| #define _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL (1 << 5) |
| #define _3D_CHICKEN_SDE_LIMIT_FIFO_POLY_DEPTH(x) ((x)<<1) /* gen8+ */ |
| #define _3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH (1 << 1) /* gen6 */ |
| |
| #define MI_MODE _MMIO(0x209c) |
| # define VS_TIMER_DISPATCH (1 << 6) |
| # define MI_FLUSH_ENABLE (1 << 12) |
| # define ASYNC_FLIP_PERF_DISABLE (1 << 14) |
| # define MODE_IDLE (1 << 9) |
| # define STOP_RING (1 << 8) |
| |
| #define GEN6_GT_MODE _MMIO(0x20d0) |
| #define GEN7_GT_MODE _MMIO(0x7008) |
| #define GEN6_WIZ_HASHING(hi, lo) (((hi) << 9) | ((lo) << 7)) |
| #define GEN6_WIZ_HASHING_8x8 GEN6_WIZ_HASHING(0, 0) |
| #define GEN6_WIZ_HASHING_8x4 GEN6_WIZ_HASHING(0, 1) |
| #define GEN6_WIZ_HASHING_16x4 GEN6_WIZ_HASHING(1, 0) |
| #define GEN6_WIZ_HASHING_MASK GEN6_WIZ_HASHING(1, 1) |
| #define GEN6_TD_FOUR_ROW_DISPATCH_DISABLE (1 << 5) |
| #define GEN9_IZ_HASHING_MASK(slice) (0x3 << ((slice) * 2)) |
| #define GEN9_IZ_HASHING(slice, val) ((val) << ((slice) * 2)) |
| |
| /* chicken reg for WaConextSwitchWithConcurrentTLBInvalidate */ |
| #define GEN9_CSFE_CHICKEN1_RCS _MMIO(0x20D4) |
| #define GEN9_PREEMPT_GPGPU_SYNC_SWITCH_DISABLE (1 << 2) |
| |
| /* WaClearTdlStateAckDirtyBits */ |
| #define GEN8_STATE_ACK _MMIO(0x20F0) |
| #define GEN9_STATE_ACK_SLICE1 _MMIO(0x20F8) |
| #define GEN9_STATE_ACK_SLICE2 _MMIO(0x2100) |
| #define GEN9_STATE_ACK_TDL0 (1 << 12) |
| #define GEN9_STATE_ACK_TDL1 (1 << 13) |
| #define GEN9_STATE_ACK_TDL2 (1 << 14) |
| #define GEN9_STATE_ACK_TDL3 (1 << 15) |
| #define GEN9_SUBSLICE_TDL_ACK_BITS \ |
| (GEN9_STATE_ACK_TDL3 | GEN9_STATE_ACK_TDL2 | \ |
| GEN9_STATE_ACK_TDL1 | GEN9_STATE_ACK_TDL0) |
| |
| #define GFX_MODE _MMIO(0x2520) |
| #define GFX_MODE_GEN7 _MMIO(0x229c) |
| #define RING_MODE_GEN7(ring) _MMIO((ring)->mmio_base+0x29c) |
| #define GFX_RUN_LIST_ENABLE (1<<15) |
| #define GFX_INTERRUPT_STEERING (1<<14) |
| #define GFX_TLB_INVALIDATE_EXPLICIT (1<<13) |
| #define GFX_SURFACE_FAULT_ENABLE (1<<12) |
| #define GFX_REPLAY_MODE (1<<11) |
| #define GFX_PSMI_GRANULARITY (1<<10) |
| #define GFX_PPGTT_ENABLE (1<<9) |
| #define GEN8_GFX_PPGTT_48B (1<<7) |
| |
| #define GFX_FORWARD_VBLANK_MASK (3<<5) |
| #define GFX_FORWARD_VBLANK_NEVER (0<<5) |
| #define GFX_FORWARD_VBLANK_ALWAYS (1<<5) |
| #define GFX_FORWARD_VBLANK_COND (2<<5) |
| |
| #define VLV_DISPLAY_BASE 0x180000 |
| #define VLV_MIPI_BASE VLV_DISPLAY_BASE |
| #define BXT_MIPI_BASE 0x60000 |
| |
| #define VLV_GU_CTL0 _MMIO(VLV_DISPLAY_BASE + 0x2030) |
| #define VLV_GU_CTL1 _MMIO(VLV_DISPLAY_BASE + 0x2034) |
| #define SCPD0 _MMIO(0x209c) /* 915+ only */ |
| #define IER _MMIO(0x20a0) |
| #define IIR _MMIO(0x20a4) |
| #define IMR _MMIO(0x20a8) |
| #define ISR _MMIO(0x20ac) |
| #define VLV_GUNIT_CLOCK_GATE _MMIO(VLV_DISPLAY_BASE + 0x2060) |
| #define GINT_DIS (1<<22) |
| #define GCFG_DIS (1<<8) |
| #define VLV_GUNIT_CLOCK_GATE2 _MMIO(VLV_DISPLAY_BASE + 0x2064) |
| #define VLV_IIR_RW _MMIO(VLV_DISPLAY_BASE + 0x2084) |
| #define VLV_IER _MMIO(VLV_DISPLAY_BASE + 0x20a0) |
| #define VLV_IIR _MMIO(VLV_DISPLAY_BASE + 0x20a4) |
| #define VLV_IMR _MMIO(VLV_DISPLAY_BASE + 0x20a8) |
| #define VLV_ISR _MMIO(VLV_DISPLAY_BASE + 0x20ac) |
| #define VLV_PCBR _MMIO(VLV_DISPLAY_BASE + 0x2120) |
| #define VLV_PCBR_ADDR_SHIFT 12 |
| |
| #define DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B only */ |
| #define EIR _MMIO(0x20b0) |
| #define EMR _MMIO(0x20b4) |
| #define ESR _MMIO(0x20b8) |
| #define GM45_ERROR_PAGE_TABLE (1<<5) |
| #define GM45_ERROR_MEM_PRIV (1<<4) |
| #define I915_ERROR_PAGE_TABLE (1<<4) |
| #define GM45_ERROR_CP_PRIV (1<<3) |
| #define I915_ERROR_MEMORY_REFRESH (1<<1) |
| #define I915_ERROR_INSTRUCTION (1<<0) |
| #define INSTPM _MMIO(0x20c0) |
| #define INSTPM_SELF_EN (1<<12) /* 915GM only */ |
| #define INSTPM_AGPBUSY_INT_EN (1<<11) /* gen3: when disabled, pending interrupts |
| will not assert AGPBUSY# and will only |
| be delivered when out of C3. */ |
| #define INSTPM_FORCE_ORDERING (1<<7) /* GEN6+ */ |
| #define INSTPM_TLB_INVALIDATE (1<<9) |
| #define INSTPM_SYNC_FLUSH (1<<5) |
| #define ACTHD _MMIO(0x20c8) |
| #define MEM_MODE _MMIO(0x20cc) |
| #define MEM_DISPLAY_B_TRICKLE_FEED_DISABLE (1<<3) /* 830 only */ |
| #define MEM_DISPLAY_A_TRICKLE_FEED_DISABLE (1<<2) /* 830/845 only */ |
| #define MEM_DISPLAY_TRICKLE_FEED_DISABLE (1<<2) /* 85x only */ |
| #define FW_BLC _MMIO(0x20d8) |
| #define FW_BLC2 _MMIO(0x20dc) |
| #define FW_BLC_SELF _MMIO(0x20e0) /* 915+ only */ |
| #define FW_BLC_SELF_EN_MASK (1<<31) |
| #define FW_BLC_SELF_FIFO_MASK (1<<16) /* 945 only */ |
| #define FW_BLC_SELF_EN (1<<15) /* 945 only */ |
| #define MM_BURST_LENGTH 0x00700000 |
| #define MM_FIFO_WATERMARK 0x0001F000 |
| #define LM_BURST_LENGTH 0x00000700 |
| #define LM_FIFO_WATERMARK 0x0000001F |
| #define MI_ARB_STATE _MMIO(0x20e4) /* 915+ only */ |
| |
| /* Make render/texture TLB fetches lower priorty than associated data |
| * fetches. This is not turned on by default |
| */ |
| #define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15) |
| |
| /* Isoch request wait on GTT enable (Display A/B/C streams). |
| * Make isoch requests stall on the TLB update. May cause |
| * display underruns (test mode only) |
| */ |
| #define MI_ARB_ISOCH_WAIT_GTT (1 << 14) |
| |
| /* Block grant count for isoch requests when block count is |
| * set to a finite value. |
| */ |
| #define MI_ARB_BLOCK_GRANT_MASK (3 << 12) |
| #define MI_ARB_BLOCK_GRANT_8 (0 << 12) /* for 3 display planes */ |
| #define MI_ARB_BLOCK_GRANT_4 (1 << 12) /* for 2 display planes */ |
| #define MI_ARB_BLOCK_GRANT_2 (2 << 12) /* for 1 display plane */ |
| #define MI_ARB_BLOCK_GRANT_0 (3 << 12) /* don't use */ |
| |
| /* Enable render writes to complete in C2/C3/C4 power states. |
| * If this isn't enabled, render writes are prevented in low |
| * power states. That seems bad to me. |
| */ |
| #define MI_ARB_C3_LP_WRITE_ENABLE (1 << 11) |
| |
| /* This acknowledges an async flip immediately instead |
| * of waiting for 2TLB fetches. |
| */ |
| #define MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE (1 << 10) |
| |
| /* Enables non-sequential data reads through arbiter |
| */ |
| #define MI_ARB_DUAL_DATA_PHASE_DISABLE (1 << 9) |
| |
| /* Disable FSB snooping of cacheable write cycles from binner/render |
| * command stream |
| */ |
| #define MI_ARB_CACHE_SNOOP_DISABLE (1 << 8) |
| |
| /* Arbiter time slice for non-isoch streams */ |
| #define MI_ARB_TIME_SLICE_MASK (7 << 5) |
| #define MI_ARB_TIME_SLICE_1 (0 << 5) |
| #define MI_ARB_TIME_SLICE_2 (1 << 5) |
| #define MI_ARB_TIME_SLICE_4 (2 << 5) |
| #define MI_ARB_TIME_SLICE_6 (3 << 5) |
| #define MI_ARB_TIME_SLICE_8 (4 << 5) |
| #define MI_ARB_TIME_SLICE_10 (5 << 5) |
| #define MI_ARB_TIME_SLICE_14 (6 << 5) |
| #define MI_ARB_TIME_SLICE_16 (7 << 5) |
| |
| /* Low priority grace period page size */ |
| #define MI_ARB_LOW_PRIORITY_GRACE_4KB (0 << 4) /* default */ |
| #define MI_ARB_LOW_PRIORITY_GRACE_8KB (1 << 4) |
| |
| /* Disable display A/B trickle feed */ |
| #define MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE (1 << 2) |
| |
| /* Set display plane priority */ |
| #define MI_ARB_DISPLAY_PRIORITY_A_B (0 << 0) /* display A > display B */ |
| #define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */ |
| |
| #define MI_STATE _MMIO(0x20e4) /* gen2 only */ |
| #define MI_AGPBUSY_INT_EN (1 << 1) /* 85x only */ |
| #define MI_AGPBUSY_830_MODE (1 << 0) /* 85x only */ |
| |
| #define CACHE_MODE_0 _MMIO(0x2120) /* 915+ only */ |
| #define CM0_PIPELINED_RENDER_FLUSH_DISABLE (1<<8) |
| #define CM0_IZ_OPT_DISABLE (1<<6) |
| #define CM0_ZR_OPT_DISABLE (1<<5) |
| #define CM0_STC_EVICT_DISABLE_LRA_SNB (1<<5) |
| #define CM0_DEPTH_EVICT_DISABLE (1<<4) |
| #define CM0_COLOR_EVICT_DISABLE (1<<3) |
| #define CM0_DEPTH_WRITE_DISABLE (1<<1) |
| #define CM0_RC_OP_FLUSH_DISABLE (1<<0) |
| #define GFX_FLSH_CNTL _MMIO(0x2170) /* 915+ only */ |
| #define GFX_FLSH_CNTL_GEN6 _MMIO(0x101008) |
| #define GFX_FLSH_CNTL_EN (1<<0) |
| #define ECOSKPD _MMIO(0x21d0) |
| #define ECO_GATING_CX_ONLY (1<<3) |
| #define ECO_FLIP_DONE (1<<0) |
| |
| #define CACHE_MODE_0_GEN7 _MMIO(0x7000) /* IVB+ */ |
| #define RC_OP_FLUSH_ENABLE (1<<0) |
| #define HIZ_RAW_STALL_OPT_DISABLE (1<<2) |
| #define CACHE_MODE_1 _MMIO(0x7004) /* IVB+ */ |
| #define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6) |
| #define GEN8_4x4_STC_OPTIMIZATION_DISABLE (1<<6) |
| #define GEN9_PARTIAL_RESOLVE_IN_VC_DISABLE (1<<1) |
| |
| #define GEN6_BLITTER_ECOSKPD _MMIO(0x221d0) |
| #define GEN6_BLITTER_LOCK_SHIFT 16 |
| #define GEN6_BLITTER_FBC_NOTIFY (1<<3) |
| |
| #define GEN6_RC_SLEEP_PSMI_CONTROL _MMIO(0x2050) |
| #define GEN6_PSMI_SLEEP_MSG_DISABLE (1 << 0) |
| #define GEN8_RC_SEMA_IDLE_MSG_DISABLE (1 << 12) |
| #define GEN8_FF_DOP_CLOCK_GATE_DISABLE (1<<10) |
| |
| /* Fuse readout registers for GT */ |
| #define CHV_FUSE_GT _MMIO(VLV_DISPLAY_BASE + 0x2168) |
| #define CHV_FGT_DISABLE_SS0 (1 << 10) |
| #define CHV_FGT_DISABLE_SS1 (1 << 11) |
| #define CHV_FGT_EU_DIS_SS0_R0_SHIFT 16 |
| #define CHV_FGT_EU_DIS_SS0_R0_MASK (0xf << CHV_FGT_EU_DIS_SS0_R0_SHIFT) |
| #define CHV_FGT_EU_DIS_SS0_R1_SHIFT 20 |
| #define CHV_FGT_EU_DIS_SS0_R1_MASK (0xf << CHV_FGT_EU_DIS_SS0_R1_SHIFT) |
| #define CHV_FGT_EU_DIS_SS1_R0_SHIFT 24 |
| #define CHV_FGT_EU_DIS_SS1_R0_MASK (0xf << CHV_FGT_EU_DIS_SS1_R0_SHIFT) |
| #define CHV_FGT_EU_DIS_SS1_R1_SHIFT 28 |
| #define CHV_FGT_EU_DIS_SS1_R1_MASK (0xf << CHV_FGT_EU_DIS_SS1_R1_SHIFT) |
| |
| #define GEN8_FUSE2 _MMIO(0x9120) |
| #define GEN8_F2_SS_DIS_SHIFT 21 |
| #define GEN8_F2_SS_DIS_MASK (0x7 << GEN8_F2_SS_DIS_SHIFT) |
| #define GEN8_F2_S_ENA_SHIFT 25 |
| #define GEN8_F2_S_ENA_MASK (0x7 << GEN8_F2_S_ENA_SHIFT) |
| |
| #define GEN9_F2_SS_DIS_SHIFT 20 |
| #define GEN9_F2_SS_DIS_MASK (0xf << GEN9_F2_SS_DIS_SHIFT) |
| |
| #define GEN8_EU_DISABLE0 _MMIO(0x9134) |
| #define GEN8_EU_DIS0_S0_MASK 0xffffff |
| #define GEN8_EU_DIS0_S1_SHIFT 24 |
| #define GEN8_EU_DIS0_S1_MASK (0xff << GEN8_EU_DIS0_S1_SHIFT) |
| |
| #define GEN8_EU_DISABLE1 _MMIO(0x9138) |
| #define GEN8_EU_DIS1_S1_MASK 0xffff |
| #define GEN8_EU_DIS1_S2_SHIFT 16 |
| #define GEN8_EU_DIS1_S2_MASK (0xffff << GEN8_EU_DIS1_S2_SHIFT) |
| |
| #define GEN8_EU_DISABLE2 _MMIO(0x913c) |
| #define GEN8_EU_DIS2_S2_MASK 0xff |
| |
| #define GEN9_EU_DISABLE(slice) _MMIO(0x9134 + (slice)*0x4) |
| |
| #define GEN6_BSD_SLEEP_PSMI_CONTROL _MMIO(0x12050) |
| #define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0) |
| #define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2) |
| #define GEN6_BSD_SLEEP_INDICATOR (1 << 3) |
| #define GEN6_BSD_GO_INDICATOR (1 << 4) |
| |
| /* On modern GEN architectures interrupt control consists of two sets |
| * of registers. The first set pertains to the ring generating the |
| * interrupt. The second control is for the functional block generating the |
| * interrupt. These are PM, GT, DE, etc. |
| * |
| * Luckily *knocks on wood* all the ring interrupt bits match up with the |
| * GT interrupt bits, so we don't need to duplicate the defines. |
| * |
| * These defines should cover us well from SNB->HSW with minor exceptions |
| * it can also work on ILK. |
| */ |
| #define GT_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26) |
| #define GT_BLT_CS_ERROR_INTERRUPT (1 << 25) |
| #define GT_BLT_USER_INTERRUPT (1 << 22) |
| #define GT_BSD_CS_ERROR_INTERRUPT (1 << 15) |
| #define GT_BSD_USER_INTERRUPT (1 << 12) |
| #define GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1 (1 << 11) /* hsw+; rsvd on snb, ivb, vlv */ |
| #define GT_CONTEXT_SWITCH_INTERRUPT (1 << 8) |
| #define GT_RENDER_L3_PARITY_ERROR_INTERRUPT (1 << 5) /* !snb */ |
| #define GT_RENDER_PIPECTL_NOTIFY_INTERRUPT (1 << 4) |
| #define GT_RENDER_CS_MASTER_ERROR_INTERRUPT (1 << 3) |
| #define GT_RENDER_SYNC_STATUS_INTERRUPT (1 << 2) |
| #define GT_RENDER_DEBUG_INTERRUPT (1 << 1) |
| #define GT_RENDER_USER_INTERRUPT (1 << 0) |
| |
| #define PM_VEBOX_CS_ERROR_INTERRUPT (1 << 12) /* hsw+ */ |
| #define PM_VEBOX_USER_INTERRUPT (1 << 10) /* hsw+ */ |
| |
| #define GT_PARITY_ERROR(dev) \ |
| (GT_RENDER_L3_PARITY_ERROR_INTERRUPT | \ |
| (IS_HASWELL(dev) ? GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1 : 0)) |
| |
| /* These are all the "old" interrupts */ |
| #define ILK_BSD_USER_INTERRUPT (1<<5) |
| |
| #define I915_PM_INTERRUPT (1<<31) |
| #define I915_ISP_INTERRUPT (1<<22) |
| #define I915_LPE_PIPE_B_INTERRUPT (1<<21) |
| #define I915_LPE_PIPE_A_INTERRUPT (1<<20) |
| #define I915_MIPIC_INTERRUPT (1<<19) |
| #define I915_MIPIA_INTERRUPT (1<<18) |
| #define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) |
| #define I915_DISPLAY_PORT_INTERRUPT (1<<17) |
| #define I915_DISPLAY_PIPE_C_HBLANK_INTERRUPT (1<<16) |
| #define I915_MASTER_ERROR_INTERRUPT (1<<15) |
| #define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) |
| #define I915_DISPLAY_PIPE_B_HBLANK_INTERRUPT (1<<14) |
| #define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */ |
| #define I915_DISPLAY_PIPE_A_HBLANK_INTERRUPT (1<<13) |
| #define I915_HWB_OOM_INTERRUPT (1<<13) |
| #define I915_LPE_PIPE_C_INTERRUPT (1<<12) |
| #define I915_SYNC_STATUS_INTERRUPT (1<<12) |
| #define I915_MISC_INTERRUPT (1<<11) |
| #define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11) |
| #define I915_DISPLAY_PIPE_C_VBLANK_INTERRUPT (1<<10) |
| #define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10) |
| #define I915_DISPLAY_PIPE_C_EVENT_INTERRUPT (1<<9) |
| #define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9) |
| #define I915_DISPLAY_PIPE_C_DPBM_INTERRUPT (1<<8) |
| #define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8) |
| #define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7) |
| #define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6) |
| #define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5) |
| #define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4) |
| #define I915_DISPLAY_PIPE_A_DPBM_INTERRUPT (1<<3) |
| #define I915_DISPLAY_PIPE_B_DPBM_INTERRUPT (1<<2) |
| #define I915_DEBUG_INTERRUPT (1<<2) |
| #define I915_WINVALID_INTERRUPT (1<<1) |
| #define I915_USER_INTERRUPT (1<<1) |
| #define I915_ASLE_INTERRUPT (1<<0) |
| #define I915_BSD_USER_INTERRUPT (1<<25) |
| |
| #define GEN6_BSD_RNCID _MMIO(0x12198) |
| |
| #define GEN7_FF_THREAD_MODE _MMIO(0x20a0) |
| #define GEN7_FF_SCHED_MASK 0x0077070 |
| #define GEN8_FF_DS_REF_CNT_FFME (1 << 19) |
| #define GEN7_FF_TS_SCHED_HS1 (0x5<<16) |
| #define GEN7_FF_TS_SCHED_HS0 (0x3<<16) |
| #define GEN7_FF_TS_SCHED_LOAD_BALANCE (0x1<<16) |
| #define GEN7_FF_TS_SCHED_HW (0x0<<16) /* Default */ |
| #define GEN7_FF_VS_REF_CNT_FFME (1 << 15) |
| #define GEN7_FF_VS_SCHED_HS1 (0x5<<12) |
| #define GEN7_FF_VS_SCHED_HS0 (0x3<<12) |
| #define GEN7_FF_VS_SCHED_LOAD_BALANCE (0x1<<12) /* Default */ |
| #define GEN7_FF_VS_SCHED_HW (0x0<<12) |
| #define GEN7_FF_DS_SCHED_HS1 (0x5<<4) |
| #define GEN7_FF_DS_SCHED_HS0 (0x3<<4) |
| #define GEN7_FF_DS_SCHED_LOAD_BALANCE (0x1<<4) /* Default */ |
| #define GEN7_FF_DS_SCHED_HW (0x0<<4) |
| |
| /* |
| * Framebuffer compression (915+ only) |
| */ |
| |
| #define FBC_CFB_BASE _MMIO(0x3200) /* 4k page aligned */ |
| #define FBC_LL_BASE _MMIO(0x3204) /* 4k page aligned */ |
| #define FBC_CONTROL _MMIO(0x3208) |
| #define FBC_CTL_EN (1<<31) |
| #define FBC_CTL_PERIODIC (1<<30) |
| #define FBC_CTL_INTERVAL_SHIFT (16) |
| #define FBC_CTL_UNCOMPRESSIBLE (1<<14) |
| #define FBC_CTL_C3_IDLE (1<<13) |
| #define FBC_CTL_STRIDE_SHIFT (5) |
| #define FBC_CTL_FENCENO_SHIFT (0) |
| #define FBC_COMMAND _MMIO(0x320c) |
| #define FBC_CMD_COMPRESS (1<<0) |
| #define FBC_STATUS _MMIO(0x3210) |
| #define FBC_STAT_COMPRESSING (1<<31) |
| #define FBC_STAT_COMPRESSED (1<<30) |
| #define FBC_STAT_MODIFIED (1<<29) |
| #define FBC_STAT_CURRENT_LINE_SHIFT (0) |
| #define FBC_CONTROL2 _MMIO(0x3214) |
| #define FBC_CTL_FENCE_DBL (0<<4) |
| #define FBC_CTL_IDLE_IMM (0<<2) |
| #define FBC_CTL_IDLE_FULL (1<<2) |
| #define FBC_CTL_IDLE_LINE (2<<2) |
| #define FBC_CTL_IDLE_DEBUG (3<<2) |
| #define FBC_CTL_CPU_FENCE (1<<1) |
| #define FBC_CTL_PLANE(plane) ((plane)<<0) |
| #define FBC_FENCE_OFF _MMIO(0x3218) /* BSpec typo has 321Bh */ |
| #define FBC_TAG(i) _MMIO(0x3300 + (i) * 4) |
| |
| #define FBC_STATUS2 _MMIO(0x43214) |
| #define FBC_COMPRESSION_MASK 0x7ff |
| |
| #define FBC_LL_SIZE (1536) |
| |
| #define FBC_LLC_READ_CTRL _MMIO(0x9044) |
| #define FBC_LLC_FULLY_OPEN (1<<30) |
| |
| /* Framebuffer compression for GM45+ */ |
| #define DPFC_CB_BASE _MMIO(0x3200) |
| #define DPFC_CONTROL _MMIO(0x3208) |
| #define DPFC_CTL_EN (1<<31) |
| #define DPFC_CTL_PLANE(plane) ((plane)<<30) |
| #define IVB_DPFC_CTL_PLANE(plane) ((plane)<<29) |
| #define DPFC_CTL_FENCE_EN (1<<29) |
| #define IVB_DPFC_CTL_FENCE_EN (1<<28) |
| #define DPFC_CTL_PERSISTENT_MODE (1<<25) |
| #define DPFC_SR_EN (1<<10) |
| #define DPFC_CTL_LIMIT_1X (0<<6) |
| #define DPFC_CTL_LIMIT_2X (1<<6) |
| #define DPFC_CTL_LIMIT_4X (2<<6) |
| #define DPFC_RECOMP_CTL _MMIO(0x320c) |
| #define DPFC_RECOMP_STALL_EN (1<<27) |
| #define DPFC_RECOMP_STALL_WM_SHIFT (16) |
| #define DPFC_RECOMP_STALL_WM_MASK (0x07ff0000) |
| #define DPFC_RECOMP_TIMER_COUNT_SHIFT (0) |
| #define DPFC_RECOMP_TIMER_COUNT_MASK (0x0000003f) |
| #define DPFC_STATUS _MMIO(0x3210) |
| #define DPFC_INVAL_SEG_SHIFT (16) |
| #define DPFC_INVAL_SEG_MASK (0x07ff0000) |
| #define DPFC_COMP_SEG_SHIFT (0) |
| #define DPFC_COMP_SEG_MASK (0x000003ff) |
| #define DPFC_STATUS2 _MMIO(0x3214) |
| #define DPFC_FENCE_YOFF _MMIO(0x3218) |
| #define DPFC_CHICKEN _MMIO(0x3224) |
| #define DPFC_HT_MODIFY (1<<31) |
| |
| /* Framebuffer compression for Ironlake */ |
| #define ILK_DPFC_CB_BASE _MMIO(0x43200) |
| #define ILK_DPFC_CONTROL _MMIO(0x43208) |
| #define FBC_CTL_FALSE_COLOR (1<<10) |
| /* The bit 28-8 is reserved */ |
| #define DPFC_RESERVED (0x1FFFFF00) |
| #define ILK_DPFC_RECOMP_CTL _MMIO(0x4320c) |
| #define ILK_DPFC_STATUS _MMIO(0x43210) |
| #define ILK_DPFC_FENCE_YOFF _MMIO(0x43218) |
| #define ILK_DPFC_CHICKEN _MMIO(0x43224) |
| #define ILK_DPFC_DISABLE_DUMMY0 (1<<8) |
| #define ILK_DPFC_NUKE_ON_ANY_MODIFICATION (1<<23) |
| #define ILK_FBC_RT_BASE _MMIO(0x2128) |
| #define ILK_FBC_RT_VALID (1<<0) |
| #define SNB_FBC_FRONT_BUFFER (1<<1) |
| |
| #define ILK_DISPLAY_CHICKEN1 _MMIO(0x42000) |
| #define ILK_FBCQ_DIS (1<<22) |
| #define ILK_PABSTRETCH_DIS (1<<21) |
| |
| |
| /* |
| * Framebuffer compression for Sandybridge |
| * |
| * The following two registers are of type GTTMMADR |
| */ |
| #define SNB_DPFC_CTL_SA _MMIO(0x100100) |
| #define SNB_CPU_FENCE_ENABLE (1<<29) |
| #define DPFC_CPU_FENCE_OFFSET _MMIO(0x100104) |
| |
| /* Framebuffer compression for Ivybridge */ |
| #define IVB_FBC_RT_BASE _MMIO(0x7020) |
| |
| #define IPS_CTL _MMIO(0x43408) |
| #define IPS_ENABLE (1 << 31) |
| |
| #define MSG_FBC_REND_STATE _MMIO(0x50380) |
| #define FBC_REND_NUKE (1<<2) |
| #define FBC_REND_CACHE_CLEAN (1<<1) |
| |
| /* |
| * GPIO regs |
| */ |
| #define GPIOA _MMIO(0x5010) |
| #define GPIOB _MMIO(0x5014) |
| #define GPIOC _MMIO(0x5018) |
| #define GPIOD _MMIO(0x501c) |
| #define GPIOE _MMIO(0x5020) |
| #define GPIOF _MMIO(0x5024) |
| #define GPIOG _MMIO(0x5028) |
| #define GPIOH _MMIO(0x502c) |
| # define GPIO_CLOCK_DIR_MASK (1 << 0) |
| # define GPIO_CLOCK_DIR_IN (0 << 1) |
| # define GPIO_CLOCK_DIR_OUT (1 << 1) |
| # define GPIO_CLOCK_VAL_MASK (1 << 2) |
| # define GPIO_CLOCK_VAL_OUT (1 << 3) |
| # define GPIO_CLOCK_VAL_IN (1 << 4) |
| # define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) |
| # define GPIO_DATA_DIR_MASK (1 << 8) |
| # define GPIO_DATA_DIR_IN (0 << 9) |
| # define GPIO_DATA_DIR_OUT (1 << 9) |
| # define GPIO_DATA_VAL_MASK (1 << 10) |
| # define GPIO_DATA_VAL_OUT (1 << 11) |
| # define GPIO_DATA_VAL_IN (1 << 12) |
| # define GPIO_DATA_PULLUP_DISABLE (1 << 13) |
| |
| #define GMBUS0 _MMIO(dev_priv->gpio_mmio_base + 0x5100) /* clock/port select */ |
| #define GMBUS_RATE_100KHZ (0<<8) |
| #define GMBUS_RATE_50KHZ (1<<8) |
| #define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */ |
| #define GMBUS_RATE_1MHZ (3<<8) /* reserved on Pineview */ |
| #define GMBUS_HOLD_EXT (1<<7) /* 300ns hold time, rsvd on Pineview */ |
| #define GMBUS_PIN_DISABLED 0 |
| #define GMBUS_PIN_SSC 1 |
| #define GMBUS_PIN_VGADDC 2 |
| #define GMBUS_PIN_PANEL 3 |
| #define GMBUS_PIN_DPD_CHV 3 /* HDMID_CHV */ |
| #define GMBUS_PIN_DPC 4 /* HDMIC */ |
| #define GMBUS_PIN_DPB 5 /* SDVO, HDMIB */ |
| #define GMBUS_PIN_DPD 6 /* HDMID */ |
| #define GMBUS_PIN_RESERVED 7 /* 7 reserved */ |
| #define GMBUS_PIN_1_BXT 1 |
| #define GMBUS_PIN_2_BXT 2 |
| #define GMBUS_PIN_3_BXT 3 |
| #define GMBUS_NUM_PINS 7 /* including 0 */ |
| #define GMBUS1 _MMIO(dev_priv->gpio_mmio_base + 0x5104) /* command/status */ |
| #define GMBUS_SW_CLR_INT (1<<31) |
| #define GMBUS_SW_RDY (1<<30) |
| #define GMBUS_ENT (1<<29) /* enable timeout */ |
| #define GMBUS_CYCLE_NONE (0<<25) |
| #define GMBUS_CYCLE_WAIT (1<<25) |
| #define GMBUS_CYCLE_INDEX (2<<25) |
| #define GMBUS_CYCLE_STOP (4<<25) |
| #define GMBUS_BYTE_COUNT_SHIFT 16 |
| #define GMBUS_BYTE_COUNT_MAX 256U |
| #define GMBUS_SLAVE_INDEX_SHIFT 8 |
| #define GMBUS_SLAVE_ADDR_SHIFT 1 |
| #define GMBUS_SLAVE_READ (1<<0) |
| #define GMBUS_SLAVE_WRITE (0<<0) |
| #define GMBUS2 _MMIO(dev_priv->gpio_mmio_base + 0x5108) /* status */ |
| #define GMBUS_INUSE (1<<15) |
| #define GMBUS_HW_WAIT_PHASE (1<<14) |
| #define GMBUS_STALL_TIMEOUT (1<<13) |
| #define GMBUS_INT (1<<12) |
| #define GMBUS_HW_RDY (1<<11) |
| #define GMBUS_SATOER (1<<10) |
| #define GMBUS_ACTIVE (1<<9) |
| #define GMBUS3 _MMIO(dev_priv->gpio_mmio_base + 0x510c) /* data buffer bytes 3-0 */ |
| #define GMBUS4 _MMIO(dev_priv->gpio_mmio_base + 0x5110) /* interrupt mask (Pineview+) */ |
| #define GMBUS_SLAVE_TIMEOUT_EN (1<<4) |
| #define GMBUS_NAK_EN (1<<3) |
| #define GMBUS_IDLE_EN (1<<2) |
| #define GMBUS_HW_WAIT_EN (1<<1) |
| #define GMBUS_HW_RDY_EN (1<<0) |
| #define GMBUS5 _MMIO(dev_priv->gpio_mmio_base + 0x5120) /* byte index */ |
| #define GMBUS_2BYTE_INDEX_EN (1<<31) |
| |
| /* |
| * Clock control & power management |
| */ |
| #define _DPLL_A (dev_priv->info.display_mmio_offset + 0x6014) |
| #define _DPLL_B (dev_priv->info.display_mmio_offset + 0x6018) |
| #define _CHV_DPLL_C (dev_priv->info.display_mmio_offset + 0x6030) |
| #define DPLL(pipe) _MMIO_PIPE3((pipe), _DPLL_A, _DPLL_B, _CHV_DPLL_C) |
| |
| #define VGA0 _MMIO(0x6000) |
| #define VGA1 _MMIO(0x6004) |
| #define VGA_PD _MMIO(0x6010) |
| #define VGA0_PD_P2_DIV_4 (1 << 7) |
| #define VGA0_PD_P1_DIV_2 (1 << 5) |
| #define VGA0_PD_P1_SHIFT 0 |
| #define VGA0_PD_P1_MASK (0x1f << 0) |
| #define VGA1_PD_P2_DIV_4 (1 << 15) |
| #define VGA1_PD_P1_DIV_2 (1 << 13) |
| #define VGA1_PD_P1_SHIFT 8 |
| #define VGA1_PD_P1_MASK (0x1f << 8) |
| #define DPLL_VCO_ENABLE (1 << 31) |
| #define DPLL_SDVO_HIGH_SPEED (1 << 30) |
| #define DPLL_DVO_2X_MODE (1 << 30) |
| #define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30) |
| #define DPLL_SYNCLOCK_ENABLE (1 << 29) |
| #define DPLL_REF_CLK_ENABLE_VLV (1 << 29) |
| #define DPLL_VGA_MODE_DIS (1 << 28) |
| #define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ |
| #define DPLLB_MODE_LVDS (2 << 26) /* i915 */ |
| #define DPLL_MODE_MASK (3 << 26) |
| #define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ |
| #define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ |
| #define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ |
| #define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ |
| #define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ |
| #define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ |
| #define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */ |
| #define DPLL_LOCK_VLV (1<<15) |
| #define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14) |
| #define DPLL_INTEGRATED_REF_CLK_VLV (1<<13) |
| #define DPLL_SSC_REF_CLK_CHV (1<<13) |
| #define DPLL_PORTC_READY_MASK (0xf << 4) |
| #define DPLL_PORTB_READY_MASK (0xf) |
| |
| #define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 |
| |
| /* Additional CHV pll/phy registers */ |
| #define DPIO_PHY_STATUS _MMIO(VLV_DISPLAY_BASE + 0x6240) |
| #define DPLL_PORTD_READY_MASK (0xf) |
| #define DISPLAY_PHY_CONTROL _MMIO(VLV_DISPLAY_BASE + 0x60100) |
| #define PHY_CH_POWER_DOWN_OVRD_EN(phy, ch) (1 << (2*(phy)+(ch)+27)) |
| #define PHY_LDO_DELAY_0NS 0x0 |
| #define PHY_LDO_DELAY_200NS 0x1 |
| #define PHY_LDO_DELAY_600NS 0x2 |
| #define PHY_LDO_SEQ_DELAY(delay, phy) ((delay) << (2*(phy)+23)) |
| #define PHY_CH_POWER_DOWN_OVRD(mask, phy, ch) ((mask) << (8*(phy)+4*(ch)+11)) |
| #define PHY_CH_SU_PSR 0x1 |
| #define PHY_CH_DEEP_PSR 0x7 |
| #define PHY_CH_POWER_MODE(mode, phy, ch) ((mode) << (6*(phy)+3*(ch)+2)) |
| #define PHY_COM_LANE_RESET_DEASSERT(phy) (1 << (phy)) |
| #define DISPLAY_PHY_STATUS _MMIO(VLV_DISPLAY_BASE + 0x60104) |
| #define PHY_POWERGOOD(phy) (((phy) == DPIO_PHY0) ? (1<<31) : (1<<30)) |
| #define PHY_STATUS_CMN_LDO(phy, ch) (1 << (6-(6*(phy)+3*(ch)))) |
| #define PHY_STATUS_SPLINE_LDO(phy, ch, spline) (1 << (8-(6*(phy)+3*(ch)+(spline)))) |
| |
| /* |
| * The i830 generation, in LVDS mode, defines P1 as the bit number set within |
| * this field (only one bit may be set). |
| */ |
| #define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 |
| #define DPLL_FPA01_P1_POST_DIV_SHIFT 16 |
| #define DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW 15 |
| /* i830, required in DVO non-gang */ |
| #define PLL_P2_DIVIDE_BY_4 (1 << 23) |
| #define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ |
| #define PLL_REF_INPUT_DREFCLK (0 << 13) |
| #define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ |
| #define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ |
| #define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) |
| #define PLL_REF_INPUT_MASK (3 << 13) |
| #define PLL_LOAD_PULSE_PHASE_SHIFT 9 |
| /* Ironlake */ |
| # define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT 9 |
| # define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK (7 << 9) |
| # define PLL_REF_SDVO_HDMI_MULTIPLIER(x) (((x)-1) << 9) |
| # define DPLL_FPA1_P1_POST_DIV_SHIFT 0 |
| # define DPLL_FPA1_P1_POST_DIV_MASK 0xff |
| |
| /* |
| * Parallel to Serial Load Pulse phase selection. |
| * Selects the phase for the 10X DPLL clock for the PCIe |
| * digital display port. The range is 4 to 13; 10 or more |
| * is just a flip delay. The default is 6 |
| */ |
| #define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) |
| #define DISPLAY_RATE_SELECT_FPA1 (1 << 8) |
| /* |
| * SDVO multiplier for 945G/GM. Not used on 965. |
| */ |
| #define SDVO_MULTIPLIER_MASK 0x000000ff |
| #define SDVO_MULTIPLIER_SHIFT_HIRES 4 |
| #define SDVO_MULTIPLIER_SHIFT_VGA 0 |
| |
| #define _DPLL_A_MD (dev_priv->info.display_mmio_offset + 0x601c) |
| #define _DPLL_B_MD (dev_priv->info.display_mmio_offset + 0x6020) |
| #define _CHV_DPLL_C_MD (dev_priv->info.display_mmio_offset + 0x603c) |
| #define DPLL_MD(pipe) _MMIO_PIPE3((pipe), _DPLL_A_MD, _DPLL_B_MD, _CHV_DPLL_C_MD) |
| |
| /* |
| * UDI pixel divider, controlling how many pixels are stuffed into a packet. |
| * |
| * Value is pixels minus 1. Must be set to 1 pixel for SDVO. |
| */ |
| #define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 |
| #define DPLL_MD_UDI_DIVIDER_SHIFT 24 |
| /* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ |
| #define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 |
| #define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 |
| /* |
| * SDVO/UDI pixel multiplier. |
| * |
| * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus |
| * clock rate is 10 times the DPLL clock. At low resolution/refresh rate |
| * modes, the bus rate would be below the limits, so SDVO allows for stuffing |
| * dummy bytes in the datastream at an increased clock rate, with both sides of |
| * the link knowing how many bytes are fill. |
| * |
| * So, for a mode with a dotclock of 65Mhz, we would want to double the clock |
| * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be |
| * set to 130Mhz, and the SDVO multiplier set to 2x in this register and |
| * through an SDVO command. |
| * |
| * This register field has values of multiplication factor minus 1, with |
| * a maximum multiplier of 5 for SDVO. |
| */ |
| #define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 |
| #define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 |
| /* |
| * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. |
| * This best be set to the default value (3) or the CRT won't work. No, |
| * I don't entirely understand what this does... |
| */ |
| #define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f |
| #define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 |
| |
| #define RAWCLK_FREQ_VLV _MMIO(VLV_DISPLAY_BASE + 0x6024) |
| |
| #define _FPA0 0x6040 |
| #define _FPA1 0x6044 |
| #define _FPB0 0x6048 |
| #define _FPB1 0x604c |
| #define FP0(pipe) _MMIO_PIPE(pipe, _FPA0, _FPB0) |
| #define FP1(pipe) _MMIO_PIPE(pipe, _FPA1, _FPB1) |
| #define FP_N_DIV_MASK 0x003f0000 |
| #define FP_N_PINEVIEW_DIV_MASK 0x00ff0000 |
| #define FP_N_DIV_SHIFT 16 |
| #define FP_M1_DIV_MASK 0x00003f00 |
| #define FP_M1_DIV_SHIFT 8 |
| #define FP_M2_DIV_MASK 0x0000003f |
| #define FP_M2_PINEVIEW_DIV_MASK 0x000000ff |
| #define FP_M2_DIV_SHIFT 0 |
| #define DPLL_TEST _MMIO(0x606c) |
| #define DPLLB_TEST_SDVO_DIV_1 (0 << 22) |
| #define DPLLB_TEST_SDVO_DIV_2 (1 << 22) |
| #define DPLLB_TEST_SDVO_DIV_4 (2 << 22) |
| #define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) |
| #define DPLLB_TEST_N_BYPASS (1 << 19) |
| #define DPLLB_TEST_M_BYPASS (1 << 18) |
| #define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) |
| #define DPLLA_TEST_N_BYPASS (1 << 3) |
| #define DPLLA_TEST_M_BYPASS (1 << 2) |
| #define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) |
| #define D_STATE _MMIO(0x6104) |
| #define DSTATE_GFX_RESET_I830 (1<<6) |
| #define DSTATE_PLL_D3_OFF (1<<3) |
| #define DSTATE_GFX_CLOCK_GATING (1<<1) |
| #define DSTATE_DOT_CLOCK_GATING (1<<0) |
| #define DSPCLK_GATE_D _MMIO(dev_priv->info.display_mmio_offset + 0x6200) |
| # define DPUNIT_B_CLOCK_GATE_DISABLE (1 << 30) /* 965 */ |
| # define VSUNIT_CLOCK_GATE_DISABLE (1 << 29) /* 965 */ |
| # define VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) /* 965 */ |
| # define VRDUNIT_CLOCK_GATE_DISABLE (1 << 27) /* 965 */ |
| # define AUDUNIT_CLOCK_GATE_DISABLE (1 << 26) /* 965 */ |
| # define DPUNIT_A_CLOCK_GATE_DISABLE (1 << 25) /* 965 */ |
| # define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24) /* 965 */ |
| # define TVRUNIT_CLOCK_GATE_DISABLE (1 << 23) /* 915-945 */ |
| # define TVCUNIT_CLOCK_GATE_DISABLE (1 << 22) /* 915-945 */ |
| # define TVFUNIT_CLOCK_GATE_DISABLE (1 << 21) /* 915-945 */ |
| # define TVEUNIT_CLOCK_GATE_DISABLE (1 << 20) /* 915-945 */ |
| # define DVSUNIT_CLOCK_GATE_DISABLE (1 << 19) /* 915-945 */ |
| # define DSSUNIT_CLOCK_GATE_DISABLE (1 << 18) /* 915-945 */ |
| # define DDBUNIT_CLOCK_GATE_DISABLE (1 << 17) /* 915-945 */ |
| # define DPRUNIT_CLOCK_GATE_DISABLE (1 << 16) /* 915-945 */ |
| # define DPFUNIT_CLOCK_GATE_DISABLE (1 << 15) /* 915-945 */ |
| # define DPBMUNIT_CLOCK_GATE_DISABLE (1 << 14) /* 915-945 */ |
| # define DPLSUNIT_CLOCK_GATE_DISABLE (1 << 13) /* 915-945 */ |
| # define DPLUNIT_CLOCK_GATE_DISABLE (1 << 12) /* 915-945 */ |
| # define DPOUNIT_CLOCK_GATE_DISABLE (1 << 11) |
| # define DPBUNIT_CLOCK_GATE_DISABLE (1 << 10) |
| # define DCUNIT_CLOCK_GATE_DISABLE (1 << 9) |
| # define DPUNIT_CLOCK_GATE_DISABLE (1 << 8) |
| # define VRUNIT_CLOCK_GATE_DISABLE (1 << 7) /* 915+: reserved */ |
| # define OVHUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 830-865 */ |
| # define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */ |
| # define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5) |
| # define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4) |
| /* |
| * This bit must be set on the 830 to prevent hangs when turning off the |
| * overlay scaler. |
| */ |
| # define OVRUNIT_CLOCK_GATE_DISABLE (1 << 3) |
| # define OVCUNIT_CLOCK_GATE_DISABLE (1 << 2) |
| # define OVUUNIT_CLOCK_GATE_DISABLE (1 << 1) |
| # define ZVUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 830 */ |
| # define OVLUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 845,865 */ |
| |
| #define RENCLK_GATE_D1 _MMIO(0x6204) |
| # define BLITTER_CLOCK_GATE_DISABLE (1 << 13) /* 945GM only */ |
| # define MPEG_CLOCK_GATE_DISABLE (1 << 12) /* 945GM only */ |
| # define PC_FE_CLOCK_GATE_DISABLE (1 << 11) |
| # define PC_BE_CLOCK_GATE_DISABLE (1 << 10) |
| # define WINDOWER_CLOCK_GATE_DISABLE (1 << 9) |
| # define INTERPOLATOR_CLOCK_GATE_DISABLE (1 << 8) |
| # define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7) |
| # define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6) |
| # define MAG_CLOCK_GATE_DISABLE (1 << 5) |
| /* This bit must be unset on 855,865 */ |
| # define MECI_CLOCK_GATE_DISABLE (1 << 4) |
| # define DCMP_CLOCK_GATE_DISABLE (1 << 3) |
| # define MEC_CLOCK_GATE_DISABLE (1 << 2) |
| # define MECO_CLOCK_GATE_DISABLE (1 << 1) |
| /* This bit must be set on 855,865. */ |
| # define SV_CLOCK_GATE_DISABLE (1 << 0) |
| # define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16) |
| # define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15) |
| # define I915_MOTION_COMP_CLOCK_GATE_DISABLE (1 << 14) |
| # define I915_BD_BF_CLOCK_GATE_DISABLE (1 << 13) |
| # define I915_SF_SE_CLOCK_GATE_DISABLE (1 << 12) |
| # define I915_WM_CLOCK_GATE_DISABLE (1 << 11) |
| # define I915_IZ_CLOCK_GATE_DISABLE (1 << 10) |
| # define I915_PI_CLOCK_GATE_DISABLE (1 << 9) |
| # define I915_DI_CLOCK_GATE_DISABLE (1 << 8) |
| # define I915_SH_SV_CLOCK_GATE_DISABLE (1 << 7) |
| # define I915_PL_DG_QC_FT_CLOCK_GATE_DISABLE (1 << 6) |
| # define I915_SC_CLOCK_GATE_DISABLE (1 << 5) |
| # define I915_FL_CLOCK_GATE_DISABLE (1 << 4) |
| # define I915_DM_CLOCK_GATE_DISABLE (1 << 3) |
| # define I915_PS_CLOCK_GATE_DISABLE (1 << 2) |
| # define I915_CC_CLOCK_GATE_DISABLE (1 << 1) |
| # define I915_BY_CLOCK_GATE_DISABLE (1 << 0) |
| |
| # define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30) |
| /* This bit must always be set on 965G/965GM */ |
| # define I965_RCC_CLOCK_GATE_DISABLE (1 << 29) |
| # define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28) |
| # define I965_DAP_CLOCK_GATE_DISABLE (1 << 27) |
| # define I965_ROC_CLOCK_GATE_DISABLE (1 << 26) |
| # define I965_GW_CLOCK_GATE_DISABLE (1 << 25) |
| # define I965_TD_CLOCK_GATE_DISABLE (1 << 24) |
| /* This bit must always be set on 965G */ |
| # define I965_ISC_CLOCK_GATE_DISABLE (1 << 23) |
| # define I965_IC_CLOCK_GATE_DISABLE (1 << 22) |
| # define I965_EU_CLOCK_GATE_DISABLE (1 << 21) |
| # define I965_IF_CLOCK_GATE_DISABLE (1 << 20) |
| # define I965_TC_CLOCK_GATE_DISABLE (1 << 19) |
| # define I965_SO_CLOCK_GATE_DISABLE (1 << 17) |
| # define I965_FBC_CLOCK_GATE_DISABLE (1 << 16) |
| # define I965_MARI_CLOCK_GATE_DISABLE (1 << 15) |
| # define I965_MASF_CLOCK_GATE_DISABLE (1 << 14) |
| # define I965_MAWB_CLOCK_GATE_DISABLE (1 << 13) |
| # define I965_EM_CLOCK_GATE_DISABLE (1 << 12) |
| # define I965_UC_CLOCK_GATE_DISABLE (1 << 11) |
| # define I965_SI_CLOCK_GATE_DISABLE (1 << 6) |
| # define I965_MT_CLOCK_GATE_DISABLE (1 << 5) |
| # define I965_PL_CLOCK_GATE_DISABLE (1 << 4) |
| # define I965_DG_CLOCK_GATE_DISABLE (1 << 3) |
| # define I965_QC_CLOCK_GATE_DISABLE (1 << 2) |
| # define I965_FT_CLOCK_GATE_DISABLE (1 << 1) |
| # define I965_DM_CLOCK_GATE_DISABLE (1 << 0) |
| |
| #define RENCLK_GATE_D2 _MMIO(0x6208) |
| #define VF_UNIT_CLOCK_GATE_DISABLE (1 << 9) |
| #define GS_UNIT_CLOCK_GATE_DISABLE (1 << 7) |
| #define CL_UNIT_CLOCK_GATE_DISABLE (1 << 6) |
| |
| #define VDECCLK_GATE_D _MMIO(0x620C) /* g4x only */ |
| #define VCP_UNIT_CLOCK_GATE_DISABLE (1 << 4) |
| |
| #define RAMCLK_GATE_D _MMIO(0x6210) /* CRL only */ |
| #define DEUC _MMIO(0x6214) /* CRL only */ |
| |
| #define FW_BLC_SELF_VLV _MMIO(VLV_DISPLAY_BASE + 0x6500) |
| #define FW_CSPWRDWNEN (1<<15) |
| |
| #define MI_ARB_VLV _MMIO(VLV_DISPLAY_BASE + 0x6504) |
| |
| #define CZCLK_CDCLK_FREQ_RATIO _MMIO(VLV_DISPLAY_BASE + 0x6508) |
| #define CDCLK_FREQ_SHIFT 4 |
| #define CDCLK_FREQ_MASK (0x1f << CDCLK_FREQ_SHIFT) |
| #define CZCLK_FREQ_MASK 0xf |
| |
| #define GCI_CONTROL _MMIO(VLV_DISPLAY_BASE + 0x650C) |
| #define PFI_CREDIT_63 (9 << 28) /* chv only */ |
| #define PFI_CREDIT_31 (8 << 28) /* chv only */ |
| #define PFI_CREDIT(x) (((x) - 8) << 28) /* 8-15 */ |
| #define PFI_CREDIT_RESEND (1 << 27) |
| #define VGA_FAST_MODE_DISABLE (1 << 14) |
| |
| #define GMBUSFREQ_VLV _MMIO(VLV_DISPLAY_BASE + 0x6510) |
| |
| /* |
| * Palette regs |
| */ |
| #define PALETTE_A_OFFSET 0xa000 |
| #define PALETTE_B_OFFSET 0xa800 |
| #define CHV_PALETTE_C_OFFSET 0xc000 |
| #define PALETTE(pipe, i) _MMIO(dev_priv->info.palette_offsets[pipe] + \ |
| dev_priv->info.display_mmio_offset + (i) * 4) |
| |
| /* MCH MMIO space */ |
| |
| /* |
| * MCHBAR mirror. |
| * |
| * This mirrors the MCHBAR MMIO space whose location is determined by |
| * device 0 function 0's pci config register 0x44 or 0x48 and matches it in |
| * every way. It is not accessible from the CP register read instructions. |
| * |
| * Starting from Haswell, you can't write registers using the MCHBAR mirror, |
| * just read. |
| */ |
| #define MCHBAR_MIRROR_BASE 0x10000 |
| |
| #define MCHBAR_MIRROR_BASE_SNB 0x140000 |
| |
| #define CTG_STOLEN_RESERVED _MMIO(MCHBAR_MIRROR_BASE + 0x34) |
| #define ELK_STOLEN_RESERVED _MMIO(MCHBAR_MIRROR_BASE + 0x48) |
| #define G4X_STOLEN_RESERVED_ADDR1_MASK (0xFFFF << 16) |
| #define G4X_STOLEN_RESERVED_ADDR2_MASK (0xFFF << 4) |
| |
| /* Memory controller frequency in MCHBAR for Haswell (possible SNB+) */ |
| #define DCLK _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5e04) |
| |
| /* 915-945 and GM965 MCH register controlling DRAM channel access */ |
| #define DCC _MMIO(MCHBAR_MIRROR_BASE + 0x200) |
| #define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0) |
| #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0) |
| #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) |
| #define DCC_ADDRESSING_MODE_MASK (3 << 0) |
| #define DCC_CHANNEL_XOR_DISABLE (1 << 10) |
| #define DCC_CHANNEL_XOR_BIT_17 (1 << 9) |
| #define DCC2 _MMIO(MCHBAR_MIRROR_BASE + 0x204) |
| #define DCC2_MODIFIED_ENHANCED_DISABLE (1 << 20) |
| |
| /* Pineview MCH register contains DDR3 setting */ |
| #define CSHRDDR3CTL _MMIO(MCHBAR_MIRROR_BASE + 0x1a8) |
| #define CSHRDDR3CTL_DDR3 (1 << 2) |
| |
| /* 965 MCH register controlling DRAM channel configuration */ |
| #define C0DRB3 _MMIO(MCHBAR_MIRROR_BASE + 0x206) |
| #define C1DRB3 _MMIO(MCHBAR_MIRROR_BASE + 0x606) |
| |
| /* snb MCH registers for reading the DRAM channel configuration */ |
| #define MAD_DIMM_C0 _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5004) |
| #define MAD_DIMM_C1 _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5008) |
| #define MAD_DIMM_C2 _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x500C) |
| #define MAD_DIMM_ECC_MASK (0x3 << 24) |
| #define MAD_DIMM_ECC_OFF (0x0 << 24) |
| #define MAD_DIMM_ECC_IO_ON_LOGIC_OFF (0x1 << 24) |
| #define MAD_DIMM_ECC_IO_OFF_LOGIC_ON (0x2 << 24) |
| #define MAD_DIMM_ECC_ON (0x3 << 24) |
| #define MAD_DIMM_ENH_INTERLEAVE (0x1 << 22) |
| #define MAD_DIMM_RANK_INTERLEAVE (0x1 << 21) |
| #define MAD_DIMM_B_WIDTH_X16 (0x1 << 20) /* X8 chips if unset */ |
| #define MAD_DIMM_A_WIDTH_X16 (0x1 << 19) /* X8 chips if unset */ |
| #define MAD_DIMM_B_DUAL_RANK (0x1 << 18) |
| #define MAD_DIMM_A_DUAL_RANK (0x1 << 17) |
| #define MAD_DIMM_A_SELECT (0x1 << 16) |
| /* DIMM sizes are in multiples of 256mb. */ |
| #define MAD_DIMM_B_SIZE_SHIFT 8 |
| #define MAD_DIMM_B_SIZE_MASK (0xff << MAD_DIMM_B_SIZE_SHIFT) |
| #define MAD_DIMM_A_SIZE_SHIFT 0 |
| #define MAD_DIMM_A_SIZE_MASK (0xff << MAD_DIMM_A_SIZE_SHIFT) |
| |
| /* snb MCH registers for priority tuning */ |
| #define MCH_SSKPD _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10) |
| #define MCH_SSKPD_WM0_MASK 0x3f |
| #define MCH_SSKPD_WM0_VAL 0xc |
| |
| #define MCH_SECP_NRG_STTS _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x592c) |
| |
| /* Clocking configuration register */ |
| #define CLKCFG _MMIO(MCHBAR_MIRROR_BASE + 0xc00) |
| #define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */ |
| #define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */ |
| #define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ |
| #define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ |
| #define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ |
| #define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ |
| /* Note, below two are guess */ |
| #define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ |
| #define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */ |
| #define CLKCFG_FSB_MASK (7 << 0) |
| #define CLKCFG_MEM_533 (1 << 4) |
| #define CLKCFG_MEM_667 (2 << 4) |
| #define CLKCFG_MEM_800 (3 << 4) |
| #define CLKCFG_MEM_MASK (7 << 4) |
| |
| #define HPLLVCO _MMIO(MCHBAR_MIRROR_BASE + 0xc38) |
| #define HPLLVCO_MOBILE _MMIO(MCHBAR_MIRROR_BASE + 0xc0f) |
| |
| #define TSC1 _MMIO(0x11001) |
| #define TSE (1<<0) |
| #define TR1 _MMIO(0x11006) |
| #define TSFS _MMIO(0x11020) |
| #define TSFS_SLOPE_MASK 0x0000ff00 |
| #define TSFS_SLOPE_SHIFT 8 |
| #define TSFS_INTR_MASK 0x000000ff |
| |
| #define CRSTANDVID _MMIO(0x11100) |
| #define PXVFREQ(fstart) _MMIO(0x11110 + (fstart) * 4) /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */ |
| #define PXVFREQ_PX_MASK 0x7f000000 |
| #define PXVFREQ_PX_SHIFT 24 |
| #define VIDFREQ_BASE _MMIO(0x11110) |
| #define VIDFREQ1 _MMIO(0x11110) /* VIDFREQ1-4 (0x1111c) (Cantiga) */ |
| #define VIDFREQ2 _MMIO(0x11114) |
| #define VIDFREQ3 _MMIO(0x11118) |
| #define VIDFREQ4 _MMIO(0x1111c) |
| #define VIDFREQ_P0_MASK 0x1f000000 |
| #define VIDFREQ_P0_SHIFT 24 |
| #define VIDFREQ_P0_CSCLK_MASK 0x00f00000 |
| #define VIDFREQ_P0_CSCLK_SHIFT 20 |
| #define VIDFREQ_P0_CRCLK_MASK 0x000f0000 |
| #define VIDFREQ_P0_CRCLK_SHIFT 16 |
| #define VIDFREQ_P1_MASK 0x00001f00 |
| #define VIDFREQ_P1_SHIFT 8 |
| #define VIDFREQ_P1_CSCLK_MASK 0x000000f0 |
| #define VIDFREQ_P1_CSCLK_SHIFT 4 |
| #define VIDFREQ_P1_CRCLK_MASK 0x0000000f |
| #define INTTOEXT_BASE_ILK _MMIO(0x11300) |
| #define INTTOEXT_BASE _MMIO(0x11120) /* INTTOEXT1-8 (0x1113c) */ |
| #define INTTOEXT_MAP3_SHIFT 24 |
| #define INTTOEXT_MAP3_MASK (0x1f << INTTOEXT_MAP3_SHIFT) |
| #define INTTOEXT_MAP2_SHIFT 16 |
| #define INTTOEXT_MAP2_MASK (0x1f << INTTOEXT_MAP2_SHIFT) |
| #define INTTOEXT_MAP1_SHIFT 8 |
| #define INTTOEXT_MAP1_MASK (0x1f << INTTOEXT_MAP1_SHIFT) |
| #define INTTOEXT_MAP0_SHIFT 0 |
| #define INTTOEXT_MAP0_MASK (0x1f << INTTOEXT_MAP0_SHIFT) |
| #define MEMSWCTL _MMIO(0x11170) /* Ironlake only */ |
| #define MEMCTL_CMD_MASK 0xe000 |
| #define MEMCTL_CMD_SHIFT 13 |
| #define MEMCTL_CMD_RCLK_OFF 0 |
| #define MEMCTL_CMD_RCLK_ON 1 |
| #define MEMCTL_CMD_CHFREQ 2 |
| #define MEMCTL_CMD_CHVID 3 |
| #define MEMCTL_CMD_VMMOFF 4 |
| #define MEMCTL_CMD_VMMON 5 |
| #define MEMCTL_CMD_STS (1<<12) /* write 1 triggers command, clears |
| when command complete */ |
| #define MEMCTL_FREQ_MASK 0x0f00 /* jitter, from 0-15 */ |
| #define MEMCTL_FREQ_SHIFT 8 |
| #define MEMCTL_SFCAVM (1<<7) |
| #define MEMCTL_TGT_VID_MASK 0x007f |
| #define MEMIHYST _MMIO(0x1117c) |
| #define MEMINTREN _MMIO(0x11180) /* 16 bits */ |
| #define MEMINT_RSEXIT_EN (1<<8) |
| #define MEMINT_CX_SUPR_EN (1<<7) |
| #define MEMINT_CONT_BUSY_EN (1<<6) |
| #define MEMINT_AVG_BUSY_EN (1<<5) |
| #define MEMINT_EVAL_CHG_EN (1<<4) |
| #define MEMINT_MON_IDLE_EN (1<<3) |
| #define MEMINT_UP_EVAL_EN (1<<2) |
| #define MEMINT_DOWN_EVAL_EN (1<<1) |
| #define MEMINT_SW_CMD_EN (1<<0) |
| #define MEMINTRSTR _MMIO(0x11182) /* 16 bits */ |
| #define MEM_RSEXIT_MASK 0xc000 |
| #define MEM_RSEXIT_SHIFT 14 |
| #define MEM_CONT_BUSY_MASK 0x3000 |
| #define MEM_CONT_BUSY_SHIFT 12 |
| #define MEM_AVG_BUSY_MASK 0x0c00 |
| #define MEM_AVG_BUSY_SHIFT 10 |
| #define MEM_EVAL_CHG_MASK 0x0300 |
| #define MEM_EVAL_BUSY_SHIFT 8 |
| #define MEM_MON_IDLE_MASK 0x00c0 |
| #define MEM_MON_IDLE_SHIFT 6 |
| #define MEM_UP_EVAL_MASK 0x0030 |
| #define MEM_UP_EVAL_SHIFT 4 |
| #define MEM_DOWN_EVAL_MASK 0x000c |
| #define MEM_DOWN_EVAL_SHIFT 2 |
| #define MEM_SW_CMD_MASK 0x0003 |
| #define MEM_INT_STEER_GFX 0 |
| #define MEM_INT_STEER_CMR 1 |
| #define MEM_INT_STEER_SMI 2 |
| #define MEM_INT_STEER_SCI 3 |
| #define MEMINTRSTS _MMIO(0x11184) |
| #define MEMINT_RSEXIT (1<<7) |
| #define MEMINT_CONT_BUSY (1<<6) |
| #define MEMINT_AVG_BUSY (1<<5) |
| #define MEMINT_EVAL_CHG (1<<4) |
| #define MEMINT_MON_IDLE (1<<3) |
| #define MEMINT_UP_EVAL (1<<2) |
| #define MEMINT_DOWN_EVAL (1<<1) |
| #define MEMINT_SW_CMD (1<<0) |
| #define MEMMODECTL _MMIO(0x11190) |
| #define MEMMODE_BOOST_EN (1<<31) |
| #define MEMMODE_BOOST_FREQ_MASK 0x0f000000 /* jitter for boost, 0-15 */ |
| #define MEMMODE_BOOST_FREQ_SHIFT 24 |
| #define MEMMODE_IDLE_MODE_MASK 0x00030000 |
| #define MEMMODE_IDLE_MODE_SHIFT 16 |
| #define MEMMODE_IDLE_MODE_EVAL 0 |
| #define MEMMODE_IDLE_MODE_CONT 1 |
| #define MEMMODE_HWIDLE_EN (1<<15) |
| #define MEMMODE_SWMODE_EN (1<<14) |
| #define MEMMODE_RCLK_GATE (1<<13) |
| #define MEMMODE_HW_UPDATE (1<<12) |
| #define MEMMODE_FSTART_MASK 0x00000f00 /* starting jitter, 0-15 */ |
| #define MEMMODE_FSTART_SHIFT 8 |
| #define MEMMODE_FMAX_MASK 0x000000f0 /* max jitter, 0-15 */ |
| #define MEMMODE_FMAX_SHIFT 4 |
| #define MEMMODE_FMIN_MASK 0x0000000f /* min jitter, 0-15 */ |
| #define RCBMAXAVG _MMIO(0x1119c) |
| #define MEMSWCTL2 _MMIO(0x1119e) /* Cantiga only */ |
| #define SWMEMCMD_RENDER_OFF (0 << 13) |
| #define SWMEMCMD_RENDER_ON (1 << 13) |
| #define SWMEMCMD_SWFREQ (2 << 13) |
| #define SWMEMCMD_TARVID (3 << 13) |
| #define SWMEMCMD_VRM_OFF (4 << 13) |
| #define SWMEMCMD_VRM_ON (5 << 13) |
| #define CMDSTS (1<<12) |
| #define SFCAVM (1<<11) |
| #define SWFREQ_MASK 0x0380 /* P0-7 */ |
| #define SWFREQ_SHIFT 7 |
| #define TARVID_MASK 0x001f |
| #define MEMSTAT_CTG _MMIO(0x111a0) |
| #define RCBMINAVG _MMIO(0x111a0) |
| #define RCUPEI _MMIO(0x111b0) |
| #define RCDNEI _MMIO(0x111b4) |
| #define RSTDBYCTL _MMIO(0x111b8) |
| #define RS1EN (1<<31) |
| #define RS2EN (1<<30) |
| #define RS3EN (1<<29) |
| #define D3RS3EN (1<<28) /* Display D3 imlies RS3 */ |
| #define SWPROMORSX (1<<27) /* RSx promotion timers ignored */ |
| #define RCWAKERW (1<<26) /* Resetwarn from PCH causes wakeup */ |
| #define DPRSLPVREN (1<<25) /* Fast voltage ramp enable */ |
| #define GFXTGHYST (1<<24) /* Hysteresis to allow trunk gating */ |
| #define RCX_SW_EXIT (1<<23) /* Leave RSx and prevent re-entry */ |
| #define RSX_STATUS_MASK (7<<20) |
| #define RSX_STATUS_ON (0<<20) |
| #define RSX_STATUS_RC1 (1<<20) |
| #define RSX_STATUS_RC1E (2<<20) |
| #define RSX_STATUS_RS1 (3<<20) |
| #define RSX_STATUS_RS2 (4<<20) /* aka rc6 */ |
| #define RSX_STATUS_RSVD (5<<20) /* deep rc6 unsupported on ilk */ |
| #define RSX_STATUS_RS3 (6<<20) /* rs3 unsupported on ilk */ |
| #define RSX_STATUS_RSVD2 (7<<20) |
| #define UWRCRSXE (1<<19) /* wake counter limit prevents rsx */ |
| #define RSCRP (1<<18) /* rs requests control on rs1/2 reqs */ |
| #define JRSC (1<<17) /* rsx coupled to cpu c-state */ |
| #define RS2INC0 (1<<16) /* allow rs2 in cpu c0 */ |
| #define RS1CONTSAV_MASK (3<<14) |
| #define RS1CONTSAV_NO_RS1 (0<<14) /* rs1 doesn't save/restore context */ |
| #define RS1CONTSAV_RSVD (1<<14) |
| #define RS1CONTSAV_SAVE_RS1 (2<<14) /* rs1 saves context */ |
| #define RS1CONTSAV_FULL_RS1 (3<<14) /* rs1 saves and restores context */ |
| #define NORMSLEXLAT_MASK (3<<12) |
| #define SLOW_RS123 (0<<12) |
| #define SLOW_RS23 (1<<12) |
| #define SLOW_RS3 (2<<12) |
| #define NORMAL_RS123 (3<<12) |
| #define RCMODE_TIMEOUT (1<<11) /* 0 is eval interval method */ |
| #define IMPROMOEN (1<<10) /* promo is immediate or delayed until next idle interval (only for timeout method above) */ |
| #define RCENTSYNC (1<<9) /* rs coupled to cpu c-state (3/6/7) */ |
| #define STATELOCK (1<<7) /* locked to rs_cstate if 0 */ |
| #define RS_CSTATE_MASK (3<<4) |
| #define RS_CSTATE_C367_RS1 (0<<4) |
| #define RS_CSTATE_C36_RS1_C7_RS2 (1<<4) |
| #define RS_CSTATE_RSVD (2<<4) |
| #define RS_CSTATE_C367_RS2 (3<<4) |
| #define REDSAVES (1<<3) /* no context save if was idle during rs0 */ |
| #define REDRESTORES (1<<2) /* no restore if was idle during rs0 */ |
| #define VIDCTL _MMIO(0x111c0) |
| #define VIDSTS _MMIO(0x111c8) |
| #define VIDSTART _MMIO(0x111cc) /* 8 bits */ |
| #define MEMSTAT_ILK _MMIO(0x111f8) |
| #define MEMSTAT_VID_MASK 0x7f00 |
| #define MEMSTAT_VID_SHIFT 8 |
| #define MEMSTAT_PSTATE_MASK 0x00f8 |
| #define MEMSTAT_PSTATE_SHIFT 3 |
| #define MEMSTAT_MON_ACTV (1<<2) |
| #define MEMSTAT_SRC_CTL_MASK 0x0003 |
| #define MEMSTAT_SRC_CTL_CORE 0 |
| #define MEMSTAT_SRC_CTL_TRB 1 |
| #define MEMSTAT_SRC_CTL_THM 2 |
| #define MEMSTAT_SRC_CTL_STDBY 3 |
| #define RCPREVBSYTUPAVG _MMIO(0x113b8) |
| #define RCPREVBSYTDNAVG _MMIO(0x113bc) |
| #define PMMISC _MMIO(0x11214) |
| #define MCPPCE_EN (1<<0) /* enable PM_MSG from PCH->MPC */ |
| #define SDEW _MMIO(0x1124c) |
| #define CSIEW0 _MMIO(0x11250) |
| #define CSIEW1 _MMIO(0x11254) |
| #define CSIEW2 _MMIO(0x11258) |
| #define PEW(i) _MMIO(0x1125c + (i) * 4) /* 5 registers */ |
| #define DEW(i) _MMIO(0x11270 + (i) * 4) /* 3 registers */ |
| #define MCHAFE _MMIO(0x112c0) |
| #define CSIEC _MMIO(0x112e0) |
| #define DMIEC _MMIO(0x112e4) |
| #define DDREC _MMIO(0x112e8) |
| #define PEG0EC _MMIO(0x112ec) |
| #define PEG1EC _MMIO(0x112f0) |
| #define GFXEC _MMIO(0x112f4) |
| #define RPPREVBSYTUPAVG _MMIO(0x113b8) |
| #define RPPREVBSYTDNAVG _MMIO(0x113bc) |
| #define ECR _MMIO(0x11600) |
| #define ECR_GPFE (1<<31) |
| #define ECR_IMONE (1<<30) |
| #define ECR_CAP_MASK 0x0000001f /* Event range, 0-31 */ |
| #define OGW0 _MMIO(0x11608) |
| #define OGW1 _MMIO(0x1160c) |
| #define EG0 _MMIO(0x11610) |
| #define EG1 _MMIO(0x11614) |
| #define EG2 _MMIO(0x11618) |
| #define EG3 _MMIO(0x1161c) |
| #define EG4 _MMIO(0x11620) |
| #define EG5 _MMIO(0x11624) |
| #define EG6 _MMIO(0x11628) |
| #define EG7 _MMIO(0x1162c) |
| #define PXW(i) _MMIO(0x11664 + (i) * 4) /* 4 registers */ |
| #define PXWL(i) _MMIO(0x11680 + (i) * 8) /* 8 registers */ |
| #define LCFUSE02 _MMIO(0x116c0) |
| #define LCFUSE_HIV_MASK 0x000000ff |
| #define CSIPLL0 _MMIO(0x12c10) |
| #define DDRMPLL1 _MMIO(0X12c20) |
| #define PEG_BAND_GAP_DATA _MMIO(0x14d68) |
| |
| #define GEN6_GT_THREAD_STATUS_REG _MMIO(0x13805c) |
| #define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7 |
| |
| #define GEN6_GT_PERF_STATUS _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5948) |
| #define BXT_GT_PERF_STATUS _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x7070) |
| #define GEN6_RP_STATE_LIMITS _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5994) |
| #define GEN6_RP_STATE_CAP _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998) |
| #define BXT_RP_STATE_CAP _MMIO(0x138170) |
| |
| /* |
| * Make these a multiple of magic 25 to avoid SNB (eg. Dell XPS |
| * 8300) freezing up around GPU hangs. Looks as if even |
| * scheduling/timer interrupts start misbehaving if the RPS |
| * EI/thresholds are "bad", leading to a very sluggish or even |
| * frozen machine. |
| */ |
| #define INTERVAL_1_28_US(us) roundup(((us) * 100) >> 7, 25) |
| #define INTERVAL_1_33_US(us) (((us) * 3) >> 2) |
| #define INTERVAL_0_833_US(us) (((us) * 6) / 5) |
| #define GT_INTERVAL_FROM_US(dev_priv, us) (IS_GEN9(dev_priv) ? \ |
| (IS_BROXTON(dev_priv) ? \ |
| INTERVAL_0_833_US(us) : \ |
| INTERVAL_1_33_US(us)) : \ |
| INTERVAL_1_28_US(us)) |
| |
| #define INTERVAL_1_28_TO_US(interval) (((interval) << 7) / 100) |
| #define INTERVAL_1_33_TO_US(interval) (((interval) << 2) / 3) |
| #define INTERVAL_0_833_TO_US(interval) (((interval) * 5) / 6) |
| #define GT_PM_INTERVAL_TO_US(dev_priv, interval) (IS_GEN9(dev_priv) ? \ |
| (IS_BROXTON(dev_priv) ? \ |
| INTERVAL_0_833_TO_US(interval) : \ |
| INTERVAL_1_33_TO_US(interval)) : \ |
| INTERVAL_1_28_TO_US(interval)) |
| |
| /* |
| * Logical Context regs |
| */ |
| #define CCID _MMIO(0x2180) |
| #define CCID_EN (1<<0) |
| /* |
| * Notes on SNB/IVB/VLV context size: |
| * - Power context is saved elsewhere (LLC or stolen) |
| * - Ring/execlist context is saved on SNB, not on IVB |
| * - Extended context size already includes render context size |
| * - We always need to follow the extended context size. |
| * SNB BSpec has comments indicating that we should use the |
| * render context size instead if execlists are disabled, but |
| * based on empirical testing that's just nonsense. |
| * - Pipelined/VF state is saved on SNB/IVB respectively |
| * - GT1 size just indicates how much of render context |
| * doesn't need saving on GT1 |
| */ |
| #define CXT_SIZE _MMIO(0x21a0) |
| #define GEN6_CXT_POWER_SIZE(cxt_reg) (((cxt_reg) >> 24) & 0x3f) |
| #define GEN6_CXT_RING_SIZE(cxt_reg) (((cxt_reg) >> 18) & 0x3f) |
| #define GEN6_CXT_RENDER_SIZE(cxt_reg) (((cxt_reg) >> 12) & 0x3f) |
| #define GEN6_CXT_EXTENDED_SIZE(cxt_reg) (((cxt_reg) >> 6) & 0x3f) |
| #define GEN6_CXT_PIPELINE_SIZE(cxt_reg) (((cxt_reg) >> 0) & 0x3f) |
| #define GEN6_CXT_TOTAL_SIZE(cxt_reg) (GEN6_CXT_RING_SIZE(cxt_reg) + \ |
| GEN6_CXT_EXTENDED_SIZE(cxt_reg) + \ |
| GEN6_CXT_PIPELINE_SIZE(cxt_reg)) |
| #define GEN7_CXT_SIZE _MMIO(0x21a8) |
| #define GEN7_CXT_POWER_SIZE(ctx_reg) (((ctx_reg) >> 25) & 0x7f) |
| #define GEN7_CXT_RING_SIZE(ctx_reg) (((ctx_reg) >> 22) & 0x7) |
| #define GEN7_CXT_RENDER_SIZE(ctx_reg) (((ctx_reg) >> 16) & 0x3f) |
| #define GEN7_CXT_EXTENDED_SIZE(ctx_reg) (((ctx_reg) >> 9) & 0x7f) |
| #define GEN7_CXT_GT1_SIZE(ctx_reg) (((ctx_reg) >> 6) & 0x7) |
| #define GEN7_CXT_VFSTATE_SIZE(ctx_reg) (((ctx_reg) >> 0) & 0x3f) |
| #define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \ |
| GEN7_CXT_VFSTATE_SIZE(ctx_reg)) |
| /* Haswell does have the CXT_SIZE register however it does not appear to be |
| * valid. Now, docs explain in dwords what is in the context object. The full |
| * size is 70720 bytes, however, the power context and execlist context will |
| * never be saved (power context is stored elsewhere, and execlists don't work |
| * on HSW) - so the final size, including the extra state required for the |
| * Resource Streamer, is 66944 bytes, which rounds to 17 pages. |
| */ |
| #define HSW_CXT_TOTAL_SIZE (17 * PAGE_SIZE) |
| /* Same as Haswell, but 72064 bytes now. */ |
| #define GEN8_CXT_TOTAL_SIZE (18 * PAGE_SIZE) |
| |
| enum { |
| INTEL_ADVANCED_CONTEXT = 0, |
| INTEL_LEGACY_32B_CONTEXT, |
| INTEL_ADVANCED_AD_CONTEXT, |
| INTEL_LEGACY_64B_CONTEXT |
| }; |
| |
| #define GEN8_CTX_ADDRESSING_MODE_SHIFT 3 |
| #define GEN8_CTX_ADDRESSING_MODE(dev_priv) (USES_FULL_48BIT_PPGTT(dev_priv) ?\ |
| INTEL_LEGACY_64B_CONTEXT : \ |
| INTEL_LEGACY_32B_CONTEXT) |
| |
| #define CHV_CLK_CTL1 _MMIO(0x101100) |
| #define VLV_CLK_CTL2 _MMIO(0x101104) |
| #define CLK_CTL2_CZCOUNT_30NS_SHIFT 28 |
| |
| /* |
| * Overlay regs |
| */ |
| |
| #define OVADD _MMIO(0x30000) |
| #define DOVSTA _MMIO(0x30008) |
| #define OC_BUF (0x3<<20) |
| #define OGAMC5 _MMIO(0x30010) |
| #define OGAMC4 _MMIO(0x30014) |
| #define OGAMC3 _MMIO(0x30018) |
| #define OGAMC2 _MMIO(0x3001c) |
| #define OGAMC1 _MMIO(0x30020) |
| #define OGAMC0 _MMIO(0x30024) |
| |
| /* |
| * GEN9 clock gating regs |
| */ |
| #define GEN9_CLKGATE_DIS_0 _MMIO(0x46530) |
| #define PWM2_GATING_DIS (1 << 14) |
| #define PWM1_GATING_DIS (1 << 13) |
| |
| /* |
| * Display engine regs |
| */ |
| |
| /* Pipe A CRC regs */ |
| #define _PIPE_CRC_CTL_A 0x60050 |
| #define PIPE_CRC_ENABLE (1 << 31) |
| /* ivb+ source selection */ |
| #define PIPE_CRC_SOURCE_PRIMARY_IVB (0 << 29) |
| #define PIPE_CRC_SOURCE_SPRITE_IVB (1 << 29) |
| #define PIPE_CRC_SOURCE_PF_IVB (2 << 29) |
| /* ilk+ source selection */ |
| #define PIPE_CRC_SOURCE_PRIMARY_ILK (0 << 28) |
| #define PIPE_CRC_SOURCE_SPRITE_ILK (1 << 28) |
| #define PIPE_CRC_SOURCE_PIPE_ILK (2 << 28) |
| /* embedded DP port on the north display block, reserved on ivb */ |
| #define PIPE_CRC_SOURCE_PORT_A_ILK (4 << 28) |
| #define PIPE_CRC_SOURCE_FDI_ILK (5 << 28) /* reserved on ivb */ |
| /* vlv source selection */ |
| #define PIPE_CRC_SOURCE_PIPE_VLV (0 << 27) |
| #define PIPE_CRC_SOURCE_HDMIB_VLV (1 << 27) |
| #define PIPE_CRC_SOURCE_HDMIC_VLV (2 << 27) |
| /* with DP port the pipe source is invalid */ |
| #define PIPE_CRC_SOURCE_DP_D_VLV (3 << 27) |
| #define PIPE_CRC_SOURCE_DP_B_VLV (6 << 27) |
| #define PIPE_CRC_SOURCE_DP_C_VLV (7 << 27) |
| /* gen3+ source selection */ |
| #define PIPE_CRC_SOURCE_PIPE_I9XX (0 << 28) |
| #define PIPE_CRC_SOURCE_SDVOB_I9XX (1 << 28) |
| #define PIPE_CRC_SOURCE_SDVOC_I9XX (2 << 28) |
| /* with DP/TV port the pipe source is invalid */ |
| #define PIPE_CRC_SOURCE_DP_D_G4X (3 << 28) |
| #define PIPE_CRC_SOURCE_TV_PRE (4 << 28) |
| #define PIPE_CRC_SOURCE_TV_POST (5 << 28) |
| #define PIPE_CRC_SOURCE_DP_B_G4X (6 << 28) |
| #define PIPE_CRC_SOURCE_DP_C_G4X (7 << 28) |
| /* gen2 doesn't have source selection bits */ |
| #define PIPE_CRC_INCLUDE_BORDER_I8XX (1 << 30) |
| |
| #define _PIPE_CRC_RES_1_A_IVB 0x60064 |
| #define _PIPE_CRC_RES_2_A_IVB 0x60068 |
| #define _PIPE_CRC_RES_3_A_IVB 0x6006c |
| #define _PIPE_CRC_RES_4_A_IVB 0x60070 |
| #define _PIPE_CRC_RES_5_A_IVB 0x60074 |
| |
| #define _PIPE_CRC_RES_RED_A 0x60060 |
| #define _PIPE_CRC_RES_GREEN_A 0x60064 |
| #define _PIPE_CRC_RES_BLUE_A 0x60068 |
| #define _PIPE_CRC_RES_RES1_A_I915 0x6006c |
| #define _PIPE_CRC_RES_RES2_A_G4X 0x60080 |
| |
| /* Pipe B CRC regs */ |
| #define _PIPE_CRC_RES_1_B_IVB 0x61064 |
| #define _PIPE_CRC_RES_2_B_IVB 0x61068 |
| #define _PIPE_CRC_RES_3_B_IVB 0x6106c |
| #define _PIPE_CRC_RES_4_B_IVB 0x61070 |
| #define _PIPE_CRC_RES_5_B_IVB 0x61074 |
| |
| #define PIPE_CRC_CTL(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_CTL_A) |
| #define PIPE_CRC_RES_1_IVB(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_1_A_IVB) |
| #define PIPE_CRC_RES_2_IVB(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_2_A_IVB) |
| #define PIPE_CRC_RES_3_IVB(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_3_A_IVB) |
| #define PIPE_CRC_RES_4_IVB(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_4_A_IVB) |
| #define PIPE_CRC_RES_5_IVB(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_5_A_IVB) |
| |
| #define PIPE_CRC_RES_RED(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_RED_A) |
| #define PIPE_CRC_RES_GREEN(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_GREEN_A) |
| #define PIPE_CRC_RES_BLUE(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_BLUE_A) |
| #define PIPE_CRC_RES_RES1_I915(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_RES1_A_I915) |
| #define PIPE_CRC_RES_RES2_G4X(pipe) _MMIO_TRANS2(pipe, _PIPE_CRC_RES_RES2_A_G4X) |
| |
| /* Pipe A timing regs */ |
| #define _HTOTAL_A 0x60000 |
| #define _HBLANK_A 0x60004 |
| #define _HSYNC_A 0x60008 |
| #define _VTOTAL_A 0x6000c |
| #define _VBLANK_A 0x60010 |
| #define _VSYNC_A 0x60014 |
| #define _PIPEASRC 0x6001c |
| #define _BCLRPAT_A 0x60020 |
| #define _VSYNCSHIFT_A 0x60028 |
| #define _PIPE_MULT_A 0x6002c |
| |
| /* Pipe B timing regs */ |
| #define _HTOTAL_B 0x61000 |
| #define _HBLANK_B 0x61004 |
| #define _HSYNC_B 0x61008 |
| #define _VTOTAL_B 0x6100c |
| #define _VBLANK_B 0x61010 |
| #define _VSYNC_B 0x61014 |
| #define _PIPEBSRC 0x6101c |
| #define _BCLRPAT_B 0x61020 |
| #define _VSYNCSHIFT_B 0x61028 |
| #define _PIPE_MULT_B 0x6102c |
| |
| #define TRANSCODER_A_OFFSET 0x60000 |
| #define TRANSCODER_B_OFFSET 0x61000 |
| #define TRANSCODER_C_OFFSET 0x62000 |
| #define CHV_TRANSCODER_C_OFFSET 0x63000 |
| #define TRANSCODER_EDP_OFFSET 0x6f000 |
| |
| #define _MMIO_TRANS2(pipe, reg) _MMIO(dev_priv->info.trans_offsets[(pipe)] - \ |
| dev_priv->info.trans_offsets[TRANSCODER_A] + (reg) + \ |
| dev_priv->info.display_mmio_offset) |
| |
| #define HTOTAL(trans) _MMIO_TRANS2(trans, _HTOTAL_A) |
| #define HBLANK(trans) _MMIO_TRANS2(trans, _HBLANK_A) |
| #define HSYNC(trans) _MMIO_TRANS2(trans, _HSYNC_A) |
| #define VTOTAL(trans) _MMIO_TRANS2(trans, _VTOTAL_A) |
| #define VBLANK(trans) _MMIO_TRANS2(trans, _VBLANK_A) |
| #define VSYNC(trans) _MMIO_TRANS2(trans, _VSYNC_A) |
| #define BCLRPAT(trans) _MMIO_TRANS2(trans, _BCLRPAT_A) |
| #define VSYNCSHIFT(trans) _MMIO_TRANS2(trans, _VSYNCSHIFT_A) |
| #define PIPESRC(trans) _MMIO_TRANS2(trans, _PIPEASRC) |
| #define PIPE_MULT(trans) _MMIO_TRANS2(trans, _PIPE_MULT_A) |
| |
| /* VLV eDP PSR registers */ |
| #define _PSRCTLA (VLV_DISPLAY_BASE + 0x60090) |
| #define _PSRCTLB (VLV_DISPLAY_BASE + 0x61090) |
| #define VLV_EDP_PSR_ENABLE (1<<0) |
| #define VLV_EDP_PSR_RESET (1<<1) |
| #define VLV_EDP_PSR_MODE_MASK (7<<2) |
| #define VLV_EDP_PSR_MODE_HW_TIMER (1<<3) |
| #define VLV_EDP_PSR_MODE_SW_TIMER (1<<2) |
| #define VLV_EDP_PSR_SINGLE_FRAME_UPDATE (1<<7) |
| #define VLV_EDP_PSR_ACTIVE_ENTRY (1<<8) |
| #define VLV_EDP_PSR_SRC_TRANSMITTER_STATE (1<<9) |
| #define VLV_EDP_PSR_DBL_FRAME (1<<10) |
| #define VLV_EDP_PSR_FRAME_COUNT_MASK (0xff<<16) |
| #define VLV_EDP_PSR_IDLE_FRAME_SHIFT 16 |
| #define VLV_PSRCTL(pipe) _MMIO_PIPE(pipe, _PSRCTLA, _PSRCTLB) |
| |
| #define _VSCSDPA (VLV_DISPLAY_BASE + 0x600a0) |
| #define _VSCSDPB (VLV_DISPLAY_BASE + 0x610a0) |
| #define VLV_EDP_PSR_SDP_FREQ_MASK (3<<30) |
| #define VLV_EDP_PSR_SDP_FREQ_ONCE (1<<31) |
| #define VLV_EDP_PSR_SDP_FREQ_EVFRAME (1<<30) |
| #define VLV_VSCSDP(pipe) _MMIO_PIPE(pipe, _VSCSDPA, _VSCSDPB) |
| |
| #define _PSRSTATA (VLV_DISPLAY_BASE + 0x60094) |
| #define _PSRSTATB (VLV_DISPLAY_BASE + 0x61094) |
| #define VLV_EDP_PSR_LAST_STATE_MASK (7<<3) |
| #define VLV_EDP_PSR_CURR_STATE_MASK 7 |
| #define VLV_EDP_PSR_DISABLED (0<<0) |
| #define VLV_EDP_PSR_INACTIVE (1<<0) |
| #define VLV_EDP_PSR_IN_TRANS_TO_ACTIVE (2<<0) |
| #define VLV_EDP_PSR_ACTIVE_NORFB_UP (3<<0) |
| #define VLV_EDP_PSR_ACTIVE_SF_UPDATE (4<<0) |
| #define VLV_EDP_PSR_EXIT (5<<0) |
| #define VLV_EDP_PSR_IN_TRANS (1<<7) |
| #define VLV_PSRSTAT(pipe) _MMIO_PIPE(pipe, _PSRSTATA, _PSRSTATB) |
| |
| /* HSW+ eDP PSR registers */ |
| #define HSW_EDP_PSR_BASE 0x64800 |
| #define BDW_EDP_PSR_BASE 0x6f800 |
| #define EDP_PSR_CTL _MMIO(dev_priv->psr_mmio_base + 0) |
| #define EDP_PSR_ENABLE (1<<31) |
| #define BDW_PSR_SINGLE_FRAME (1<<30) |
| #define EDP_PSR_LINK_STANDBY (1<<27) |
| #define EDP_PSR_MIN_LINK_ENTRY_TIME_MASK (3<<25) |
| #define EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES (0<<25) |
| #define EDP_PSR_MIN_LINK_ENTRY_TIME_4_LINES (1<<25) |
| #define EDP_PSR_MIN_LINK_ENTRY_TIME_2_LINES (2<<25) |
| #define EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES (3<<25) |
| #define EDP_PSR_MAX_SLEEP_TIME_SHIFT 20 |
| #define EDP_PSR_SKIP_AUX_EXIT (1<<12) |
| #define EDP_PSR_TP1_TP2_SEL (0<<11) |
| #define EDP_PSR_TP1_TP3_SEL (1<<11) |
| #define EDP_PSR_TP2_TP3_TIME_500us (0<<8) |
| #define EDP_PSR_TP2_TP3_TIME_100us (1<<8) |
| #define EDP_PSR_TP2_TP3_TIME_2500us (2<<8) |
| #define EDP_PSR_TP2_TP3_TIME_0us (3<<8) |
| #define EDP_PSR_TP1_TIME_500us (0<<4) |
| #define EDP_PSR_TP1_TIME_100us (1<<4) |
| #define EDP_PSR_TP1_TIME_2500us (2<<4) |
| #define EDP_PSR_TP1_TIME_0us (3<<4) |
| #define EDP_PSR_IDLE_FRAME_SHIFT 0 |
| |
| #define EDP_PSR_AUX_CTL _MMIO(dev_priv->psr_mmio_base + 0x10) |
| #define EDP_PSR_AUX_DATA(i) _MMIO(dev_priv->psr_mmio_base + 0x14 + (i) * 4) /* 5 registers */ |
| |
| #define EDP_PSR_STATUS_CTL _MMIO(dev_priv->psr_mmio_base + 0x40) |
| #define EDP_PSR_STATUS_STATE_MASK (7<<29) |
| #define EDP_PSR_STATUS_STATE_IDLE (0<<29) |
| #define EDP_PSR_STATUS_STATE_SRDONACK (1<<29) |
| #define EDP_PSR_STATUS_STATE_SRDENT (2<<29) |
| #define EDP_PSR_STATUS_STATE_BUFOFF (3<<29) |
| #define EDP_PSR_STATUS_STATE_BUFON (4<<29) |
| #define EDP_PSR_STATUS_STATE_AUXACK (5<<29) |
| #define EDP_PSR_STATUS_STATE_SRDOFFACK (6<<29) |
| #define EDP_PSR_STATUS_LINK_MASK (3<<26) |
| #define EDP_PSR_STATUS_LINK_FULL_OFF (0<<26) |
| #define EDP_PSR_STATUS_LINK_FULL_ON (1<<26) |
| #define EDP_PSR_STATUS_LINK_STANDBY (2<<26) |
| #define EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT 20 |
| #define EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK 0x1f |
| #define EDP_PSR_STATUS_COUNT_SHIFT 16 |
| #define EDP_PSR_STATUS_COUNT_MASK 0xf |
| #define EDP_PSR_STATUS_AUX_ERROR (1<<15) |
| #define EDP_PSR_STATUS_AUX_SENDING (1<<12) |
| #define EDP_PSR_STATUS_SENDING_IDLE (1<<9) |
| #define EDP_PSR_STATUS_SENDING_TP2_TP3 (1<<8) |
| #define EDP_PSR_STATUS_SENDING_TP1 (1<<4) |
| #define EDP_PSR_STATUS_IDLE_MASK 0xf |
| |
| #define EDP_PSR_PERF_CNT _MMIO(dev_priv->psr_mmio_base + 0x44) |
| #define EDP_PSR_PERF_CNT_MASK 0xffffff |
| |
| #define EDP_PSR_DEBUG_CTL _MMIO(dev_priv->psr_mmio_base + 0x60) |
| #define EDP_PSR_DEBUG_MASK_LPSP (1<<27) |
| #define EDP_PSR_DEBUG_MASK_MEMUP (1<<26) |
| #define EDP_PSR_DEBUG_MASK_HPD (1<<25) |
| |
| #define EDP_PSR2_CTL _MMIO(0x6f900) |
| #define EDP_PSR2_ENABLE (1<<31) |
| #define EDP_SU_TRACK_ENABLE (1<<30) |
| #define EDP_MAX_SU_DISABLE_TIME(t) ((t)<<20) |
| #define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f<<20) |
| #define EDP_PSR2_TP2_TIME_500 (0<<8) |
| #define EDP_PSR2_TP2_TIME_100 (1<<8) |
| #define EDP_PSR2_TP2_TIME_2500 (2<<8) |
| #define EDP_PSR2_TP2_TIME_50 (3<<8) |
| #define EDP_PSR2_TP2_TIME_MASK (3<<8) |
| #define EDP_PSR2_FRAME_BEFORE_SU_SHIFT 4 |
| #define EDP_PSR2_FRAME_BEFORE_SU_MASK (0xf<<4) |
| #define EDP_PSR2_IDLE_MASK 0xf |
| |
| /* VGA port control */ |
| #define ADPA _MMIO(0x61100) |
| #define PCH_ADPA _MMIO(0xe1100) |
| #define VLV_ADPA _MMIO(VLV_DISPLAY_BASE + 0x61100) |
| |
| #define ADPA_DAC_ENABLE (1<<31) |
| #define ADPA_DAC_DISABLE 0 |
| #define ADPA_PIPE_SELECT_MASK (1<<30) |
| #define ADPA_PIPE_A_SELECT 0 |
| #define ADPA_PIPE_B_SELECT (1<<30) |
| #define ADPA_PIPE_SELECT(pipe) ((pipe) << 30) |
| /* CPT uses bits 29:30 for pch transcoder select */ |
| #define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ |
| #define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24) |
| #define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24) |
| #define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24) |
| #define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24) |
| #define ADPA_CRT_HOTPLUG_ENABLE (1<<23) |
| #define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22) |
| #define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22) |
| #define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21) |
| #define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21) |
| #define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20) |
| #define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20) |
| #define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18) |
| #define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18) |
| #define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18) |
| #define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18) |
| #define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17) |
| #define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) |
| #define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) |
| #define ADPA_USE_VGA_HVPOLARITY (1<<15) |
| #define ADPA_SETS_HVPOLARITY 0 |
| #define ADPA_VSYNC_CNTL_DISABLE (1<<10) |
| #define ADPA_VSYNC_CNTL_ENABLE 0 |
| #define ADPA_HSYNC_CNTL_DISABLE (1<<11) |
| #define ADPA_HSYNC_CNTL_ENABLE 0 |
| #define ADPA_VSYNC_ACTIVE_HIGH (1<<4) |
| #define ADPA_VSYNC_ACTIVE_LOW 0 |
| #define ADPA_HSYNC_ACTIVE_HIGH (1<<3) |
| #define ADPA_HSYNC_ACTIVE_LOW 0 |
| #define ADPA_DPMS_MASK (~(3<<10)) |
| #define ADPA_DPMS_ON (0<<10) |
| #define ADPA_DPMS_SUSPEND (1<<10) |
| #define ADPA_DPMS_STANDBY (2<<10) |
| #define ADPA_DPMS_OFF (3<<10) |
| |
| |
| /* Hotplug control (945+ only) */ |
| #define PORT_HOTPLUG_EN _MMIO(dev_priv->info.display_mmio_offset + 0x61110) |
| #define PORTB_HOTPLUG_INT_EN (1 << 29) |
| #define PORTC_HOTPLUG_INT_EN (1 << 28) |
| #define PORTD_HOTPLUG_INT_EN (1 << 27) |
| #define SDVOB_HOTPLUG_INT_EN (1 << 26) |
| #define SDVOC_HOTPLUG_INT_EN (1 << 25) |
| #define TV_HOTPLUG_INT_EN (1 << 18) |
| #define CRT_HOTPLUG_INT_EN (1 << 9) |
| #define HOTPLUG_INT_EN_MASK (PORTB_HOTPLUG_INT_EN | \ |
| PORTC_HOTPLUG_INT_EN | \ |
| PORTD_HOTPLUG_INT_EN | \ |
| SDVOC_HOTPLUG_INT_EN | \ |
| SDVOB_HOTPLUG_INT_EN | \ |
| CRT_HOTPLUG_INT_EN) |
| #define CRT_HOTPLUG_FORCE_DETECT (1 << 3) |
| #define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8) |
| /* must use period 64 on GM45 according to docs */ |
| #define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8) |
| #define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7) |
| #define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5) |
| #define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4) |
| #define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4) |
| #define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2) |
| #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) |
| |
| #define PORT_HOTPLUG_STAT _MMIO(dev_priv->info.display_mmio_offset + 0x61114) |
| /* |
| * HDMI/DP bits are g4x+ |
| * |
| * WARNING: Bspec for hpd status bits on gen4 seems to be completely confused. |
| * Please check the detailed lore in the commit message for for experimental |
| * evidence. |
| */ |
| /* Bspec says GM45 should match G4X/VLV/CHV, but reality disagrees */ |
| #define PORTD_HOTPLUG_LIVE_STATUS_GM45 (1 << 29) |
| #define PORTC_HOTPLUG_LIVE_STATUS_GM45 (1 << 28) |
| #define PORTB_HOTPLUG_LIVE_STATUS_GM45 (1 << 27) |
| /* G4X/VLV/CHV DP/HDMI bits again match Bspec */ |
| #define PORTD_HOTPLUG_LIVE_STATUS_G4X (1 << 27) |
| #define PORTC_HOTPLUG_LIVE_STATUS_G4X (1 << 28) |
| #define PORTB_HOTPLUG_LIVE_STATUS_G4X (1 << 29) |
| #define PORTD_HOTPLUG_INT_STATUS (3 << 21) |
| #define PORTD_HOTPLUG_INT_LONG_PULSE (2 << 21) |
| #define PORTD_HOTPLUG_INT_SHORT_PULSE (1 << 21) |
| #define PORTC_HOTPLUG_INT_STATUS (3 << 19) |
| #define PORTC_HOTPLUG_INT_LONG_PULSE (2 << 19) |
| #define PORTC_HOTPLUG_INT_SHORT_PULSE (1 << 19) |
| #define PORTB_HOTPLUG_INT_STATUS (3 << 17) |
| #define PORTB_HOTPLUG_INT_LONG_PULSE (2 << 17) |
| #define PORTB_HOTPLUG_INT_SHORT_PLUSE (1 << 17) |
| /* CRT/TV common between gen3+ */ |
| #define CRT_HOTPLUG_INT_STATUS (1 << 11) |
| #define TV_HOTPLUG_INT_STATUS (1 << 10) |
| #define CRT_HOTPLUG_MONITOR_MASK (3 << 8) |
| #define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) |
| #define CRT_HOTPLUG_MONITOR_MONO (2 << 8) |
| #define CRT_HOTPLUG_MONITOR_NONE (0 << 8) |
| #define DP_AUX_CHANNEL_D_INT_STATUS_G4X (1 << 6) |
| #define DP_AUX_CHANNEL_C_INT_STATUS_G4X (1 << 5) |
| #define DP_AUX_CHANNEL_B_INT_STATUS_G4X (1 << 4) |
| #define DP_AUX_CHANNEL_MASK_INT_STATUS_G4X (7 << 4) |
| |
| /* SDVO is different across gen3/4 */ |
| #define SDVOC_HOTPLUG_INT_STATUS_G4X (1 << 3) |
| #define SDVOB_HOTPLUG_INT_STATUS_G4X (1 << 2) |
| /* |
| * Bspec seems to be seriously misleaded about the SDVO hpd bits on i965g/gm, |
| * since reality corrobates that they're the same as on gen3. But keep these |
| * bits here (and the comment!) to help any other lost wanderers back onto the |
| * right tracks. |
| */ |
| #define SDVOC_HOTPLUG_INT_STATUS_I965 (3 << 4) |
| #define SDVOB_HOTPLUG_INT_STATUS_I965 (3 << 2) |
| #define SDVOC_HOTPLUG_INT_STATUS_I915 (1 << 7) |
| #define SDVOB_HOTPLUG_INT_STATUS_I915 (1 << 6) |
| #define HOTPLUG_INT_STATUS_G4X (CRT_HOTPLUG_INT_STATUS | \ |
| SDVOB_HOTPLUG_INT_STATUS_G4X | \ |
| SDVOC_HOTPLUG_INT_STATUS_G4X | \ |
| PORTB_HOTPLUG_INT_STATUS | \ |
| PORTC_HOTPLUG_INT_STATUS | \ |
| PORTD_HOTPLUG_INT_STATUS) |
| |
| #define HOTPLUG_INT_STATUS_I915 (CRT_HOTPLUG_INT_STATUS | \ |
| SDVOB_HOTPLUG_INT_STATUS_I915 | \ |
| SDVOC_HOTPLUG_INT_STATUS_I915 | \ |
| PORTB_HOTPLUG_INT_STATUS | \ |
| PORTC_HOTPLUG_INT_STATUS | \ |
| PORTD_HOTPLUG_INT_STATUS) |
| |
| /* SDVO and HDMI port control. |
| * The same register may be used for SDVO or HDMI */ |
| #define _GEN3_SDVOB 0x61140 |
| #define _GEN3_SDVOC 0x61160 |
| #define GEN3_SDVOB _MMIO(_GEN3_SDVOB) |
| #define GEN3_SDVOC _MMIO(_GEN3_SDVOC) |
| #define GEN4_HDMIB GEN3_SDVOB |
| #define GEN4_HDMIC GEN3_SDVOC |
| #define VLV_HDMIB _MMIO(VLV_DISPLAY_BASE + 0x61140) |
| #define VLV_HDMIC _MMIO(VLV_DISPLAY_BASE + 0x61160) |
| #define CHV_HDMID _MMIO(VLV_DISPLAY_BASE + 0x6116C) |
| #define PCH_SDVOB _MMIO(0xe1140) |
| #define PCH_HDMIB PCH_SDVOB |
| #define PCH_HDMIC _MMIO(0xe1150) |
| #define PCH_HDMID _MMIO(0xe1160) |
| |
| #define PORT_DFT_I9XX _MMIO(0x61150) |
| #define DC_BALANCE_RESET (1 << 25) |
| #define PORT_DFT2_G4X _MMIO(dev_priv->info.display_mmio_offset + 0x61154) |
| #define DC_BALANCE_RESET_VLV (1 << 31) |
| #define PIPE_SCRAMBLE_RESET_MASK ((1 << 14) | (0x3 << 0)) |
| #define PIPE_C_SCRAMBLE_RESET (1 << 14) /* chv */ |
| #define PIPE_B_SCRAMBLE_RESET (1 << 1) |
| #define PIPE_A_SCRAMBLE_RESET (1 << 0) |
| |
| /* Gen 3 SDVO bits: */ |
| #define SDVO_ENABLE (1 << 31) |
| #define SDVO_PIPE_SEL(pipe) ((pipe) << 30) |
| #define SDVO_PIPE_SEL_MASK (1 << 30) |
| #define SDVO_PIPE_B_SELECT (1 << 30) |
| #define SDVO_STALL_SELECT (1 << 29) |
| #define SDVO_INTERRUPT_ENABLE (1 << 26) |
| /* |
| * 915G/GM SDVO pixel multiplier. |
| * Programmed value is multiplier - 1, up to 5x. |
| * \sa DPLL_MD_UDI_MULTIPLIER_MASK |
| */ |
| #define SDVO_PORT_MULTIPLY_MASK (7 << 23) |
| #define SDVO_PORT_MULTIPLY_SHIFT 23 |
| #define SDVO_PHASE_SELECT_MASK (15 << 19) |
| #define SDVO_PHASE_SELECT_DEFAULT (6 << 19) |
| #define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) |
| #define SDVOC_GANG_MODE (1 << 16) /* Port C only */ |
| #define SDVO_BORDER_ENABLE (1 << 7) /* SDVO only */ |
| #define SDVOB_PCIE_CONCURRENCY (1 << 3) /* Port B only */ |
| #define SDVO_DETECTED (1 << 2) |
| /* Bits to be preserved when writing */ |
| #define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | \ |
| SDVO_INTERRUPT_ENABLE) |
| #define SDVOC_PRESERVE_MASK ((1 << 17) | SDVO_INTERRUPT_ENABLE) |
| |
| /* Gen 4 SDVO/HDMI bits: */ |
| #define SDVO_COLOR_FORMAT_8bpc (0 << 26) |
| #define SDVO_COLOR_FORMAT_MASK (7 << 26) |
| #define SDVO_ENCODING_SDVO (0 << 10) |
| #define SDVO_ENCODING_HDMI (2 << 10) |
| #define HDMI_MODE_SELECT_HDMI (1 << 9) /* HDMI only */ |
| #define HDMI_MODE_SELECT_DVI (0 << 9) /* HDMI only */ |
| #define HDMI_COLOR_RANGE_16_235 (1 << 8) /* HDMI only */ |
| #define SDVO_AUDIO_ENABLE (1 << 6) |
| /* VSYNC/HSYNC bits new with 965, default is to be set */ |
| #define SDVO_VSYNC_ACTIVE_HIGH (1 << 4) |
| #define SDVO_HSYNC_ACTIVE_HIGH (1 << 3) |
| |
| /* Gen 5 (IBX) SDVO/HDMI bits: */ |
| #define HDMI_COLOR_FORMAT_12bpc (3 << 26) /* HDMI only */ |
| #define SDVOB_HOTPLUG_ENABLE (1 << 23) /* SDVO only */ |
| |
| /* Gen 6 (CPT) SDVO/HDMI bits: */ |
| #define SDVO_PIPE_SEL_CPT(pipe) ((pipe) << 29) |
| #define SDVO_PIPE_SEL_MASK_CPT (3 << 29) |
| |
| /* CHV SDVO/HDMI bits: */ |
| #define SDVO_PIPE_SEL_CHV(pipe) ((pipe) << 24) |
| #define SDVO_PIPE_SEL_MASK_CHV (3 << 24) |
| |
| |
| /* DVO port control */ |
| #define _DVOA 0x61120 |
| #define DVOA _MMIO(_DVOA) |
| #define _DVOB 0x61140 |
| #define DVOB _MMIO(_DVOB) |
| #define _DVOC 0x61160 |
| #define DVOC _MMIO(_DVOC) |
| #define DVO_ENABLE (1 << 31) |
| #define DVO_PIPE_B_SELECT (1 << 30) |
| #define DVO_PIPE_STALL_UNUSED (0 << 28) |
| #define DVO_PIPE_STALL (1 << 28) |
| #define DVO_PIPE_STALL_TV (2 << 28) |
| #define DVO_PIPE_STALL_MASK (3 << 28) |
| #define DVO_USE_VGA_SYNC (1 << 15) |
| #define DVO_DATA_ORDER_I740 (0 << 14) |
| #define DVO_DATA_ORDER_FP (1 << 14) |
| #define DVO_VSYNC_DISABLE (1 << 11) |
| #define DVO_HSYNC_DISABLE (1 << 10) |
| #define DVO_VSYNC_TRISTATE (1 << 9) |
| #define DVO_HSYNC_TRISTATE (1 << 8) |
| #define DVO_BORDER_ENABLE (1 << 7) |
| #define DVO_DATA_ORDER_GBRG (1 << 6) |
| #define DVO_DATA_ORDER_RGGB (0 << 6) |
| #define DVO_DATA_ORDER_GBRG_ERRATA (0 << 6) |
| #define DVO_DATA_ORDER_RGGB_ERRATA (1 << 6) |
| #define DVO_VSYNC_ACTIVE_HIGH (1 << 4) |
| #define DVO_HSYNC_ACTIVE_HIGH (1 << 3) |
| #define DVO_BLANK_ACTIVE_HIGH (1 << 2) |
| #define DVO_OUTPUT_CSTATE_PIXELS (1 << 1) /* SDG only */ |
| #define DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0) /* SDG only */ |
| #define DVO_PRESERVE_MASK (0x7<<24) |
| #define DVOA_SRCDIM _MMIO(0x61124) |
| #define DVOB_SRCDIM _MMIO(0x61144) |
| #define DVOC_SRCDIM _MMIO(0x61164) |
| #define DVO_SRCDIM_HORIZONTAL_SHIFT 12 |
| #define DVO_SRCDIM_VERTICAL_SHIFT 0 |
| |
| /* LVDS port control */ |
| #define LVDS _MMIO(0x61180) |
| /* |
| * Enables the LVDS port. This bit must be set before DPLLs are enabled, as |
| * the DPLL semantics change when the LVDS is assigned to that pipe. |
| */ |
| #define LVDS_PORT_EN (1 << 31) |
| /* Selects pipe B for LVDS data. Must be set on pre-965. */ |
| #define LVDS_PIPEB_SELECT (1 << 30) |
| #define LVDS_PIPE_MASK (1 << 30) |
| #define LVDS_PIPE(pipe) ((pipe) << 30) |
| /* LVDS dithering flag on 965/g4x platform */ |
| #define LVDS_ENABLE_DITHER (1 << 25) |
| /* LVDS sync polarity flags. Set to invert (i.e. negative) */ |
| #define LVDS_VSYNC_POLARITY (1 << 21) |
| #define LVDS_HSYNC_POLARITY (1 << 20) |
| |
| /* Enable border for unscaled (or aspect-scaled) display */ |
| #define LVDS_BORDER_ENABLE (1 << 15) |
| /* |
| * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per |
| * pixel. |
| */ |
| #define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) |
| #define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) |
| #define LVDS_A0A2_CLKA_POWER_UP (3 << 8) |
| /* |
| * Controls the A3 data pair, which contains the additional LSBs for 24 bit |
| * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be |
| * on. |
| */ |
| #define LVDS_A3_POWER_MASK (3 << 6) |
| #define LVDS_A3_POWER_DOWN (0 << 6) |
| #define LVDS_A3_POWER_UP (3 << 6) |
| /* |
| * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP |
| * is set. |
| */ |
| #define LVDS_CLKB_POWER_MASK (3 << 4) |
| #define LVDS_CLKB_POWER_DOWN (0 << 4) |
| #define LVDS_CLKB_POWER_UP (3 << 4) |
| /* |
| * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 |
| * setting for whether we are in dual-channel mode. The B3 pair will |
| * additionally only be powered up when LVDS_A3_POWER_UP is set. |
| */ |
| #define LVDS_B0B3_POWER_MASK (3 << 2) |
| #define LVDS_B0B3_POWER_DOWN (0 << 2) |
| #define LVDS_B0B3_POWER_UP (3 << 2) |
| |
| /* Video Data Island Packet control */ |
| #define VIDEO_DIP_DATA _MMIO(0x61178) |
| /* Read the description of VIDEO_DIP_DATA (before Haswell) or VIDEO_DIP_ECC |
| * (Haswell and newer) to see which VIDEO_DIP_DATA byte corresponds to each byte |
| * of the infoframe structure specified by CEA-861. */ |
| #define VIDEO_DIP_DATA_SIZE 32 |
| #define VIDEO_DIP_VSC_DATA_SIZE 36 |
| #define VIDEO_DIP_CTL _MMIO(0x61170) |
| /* Pre HSW: */ |
| #define VIDEO_DIP_ENABLE (1 << 31) |
| #define VIDEO_DIP_PORT(port) ((port) << 29) |
| #define VIDEO_DIP_PORT_MASK (3 << 29) |
| #define VIDEO_DIP_ENABLE_GCP (1 << 25) |
| #define VIDEO_DIP_ENABLE_AVI (1 << 21) |
| #define VIDEO_DIP_ENABLE_VENDOR (2 << 21) |
| #define VIDEO_DIP_ENABLE_GAMUT (4 << 21) |
| #define VIDEO_DIP_ENABLE_SPD (8 << 21) |
| #define VIDEO_DIP_SELECT_AVI (0 << 19) |
| #define VIDEO_DIP_SELECT_VENDOR (1 << 19) |
| #define VIDEO_DIP_SELECT_SPD (3 << 19) |
| #define VIDEO_DIP_SELECT_MASK (3 << 19) |
| #define VIDEO_DIP_FREQ_ONCE (0 << 16) |
| #define VIDEO_DIP_FREQ_VSYNC (1 << 16) |
| #define VIDEO_DIP_FREQ_2VSYNC (2 << 16) |
| #define VIDEO_DIP_FREQ_MASK (3 << 16) |
| /* HSW and later: */ |
| #define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20) |
| #define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16) |
| #define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12) |
| #define VIDEO_DIP_ENABLE_VS_HSW (1 << 8) |
| #define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4) |
| #define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) |
| |
| /* Panel power sequencing */ |
| #define PP_STATUS _MMIO(0x61200) |
| #define PP_ON (1 << 31) |
| /* |
| * Indicates that all dependencies of the panel are on: |
| * |
| * - PLL enabled |
| * - pipe enabled |
| * - LVDS/DVOB/DVOC on |
| */ |
| #define PP_READY (1 << 30) |
| #define PP_SEQUENCE_NONE (0 << 28) |
| #define PP_SEQUENCE_POWER_UP (1 << 28) |
| #define PP_SEQUENCE_POWER_DOWN (2 << 28) |
| #define PP_SEQUENCE_MASK (3 << 28) |
| #define PP_SEQUENCE_SHIFT 28 |
| #define PP_CYCLE_DELAY_ACTIVE (1 << 27) |
| #define PP_SEQUENCE_STATE_MASK 0x0000000f |
| #define PP_SEQUENCE_STATE_OFF_IDLE (0x0 << 0) |
| #define PP_SEQUENCE_STATE_OFF_S0_1 (0x1 << 0) |
| #define PP_SEQUENCE_STATE_OFF_S0_2 (0x2 << 0) |
| #define PP_SEQUENCE_STATE_OFF_S0_3 (0x3 << 0) |
| #define PP_SEQUENCE_STATE_ON_IDLE (0x8 << 0) |
| #define PP_SEQUENCE_STATE_ON_S1_0 (0x9 << 0) |
| #define PP_SEQUENCE_STATE_ON_S1_2 (0xa << 0) |
| #define PP_SEQUENCE_STATE_ON_S1_3 (0xb << 0) |
| #define PP_SEQUENCE_STATE_RESET (0xf << 0) |
| #define PP_CONTROL _MMIO(0x61204) |
| #define POWER_TARGET_ON (1 << 0) |
| #define PP_ON_DELAYS _MMIO(0x61208) |
| #define PP_OFF_DELAYS _MMIO(0x6120c) |
| #define PP_DIVISOR _MMIO(0x61210) |
| |
| /* Panel fitting */ |
| #define PFIT_CONTROL _MMIO(dev_priv->info.display_mmio_offset + 0x61230) |
| #define PFIT_ENABLE (1 << 31) |
| #define PFIT_PIPE_MASK (3 << 29) |
| #define PFIT_PIPE_SHIFT 29 |
| #define VERT_INTERP_DISABLE (0 << 10) |
| #define VERT_INTERP_BILINEAR (1 << 10) |
| #define VERT_INTERP_MASK (3 << 10) |
| #define VERT_AUTO_SCALE (1 << 9) |
| #define HORIZ_INTERP_DISABLE (0 << 6) |
| #define HORIZ_INTERP_BILINEAR (1 << 6) |
| #define HORIZ_INTERP_MASK (3 << 6) |
| #define HORIZ_AUTO_SCALE (1 << 5) |
| #define PANEL_8TO6_DITHER_ENABLE (1 << 3) |
| #define PFIT_FILTER_FUZZY (0 << 24) |
| #define PFIT_SCALING_AUTO (0 << 26) |
| #define PFIT_SCALING_PROGRAMMED (1 << 26) |
| #define PFIT_SCALING_PILLAR (2 << 26) |
| #define PFIT_SCALING_LETTER (3 << 26) |
| #define PFIT_PGM_RATIOS _MMIO(dev_priv->info.display_mmio_offset + 0x61234) |
| /* Pre-965 */ |
| #define PFIT_VERT_SCALE_SHIFT 20 |
| #define PFIT_VERT_SCALE_MASK 0xfff00000 |
| #define PFIT_HORIZ_SCALE_SHIFT 4 |
| #define PFIT_HORIZ_SCALE_MASK 0x0000fff0 |
| /* 965+ */ |
| #define PFIT_VERT_SCALE_SHIFT_965 16 |
| #define PFIT_VERT_SCALE_MASK_965 0x1fff0000 |
| #define PFIT_HORIZ_SCALE_SHIFT_965 0 |
| #define PFIT_HORIZ_SCALE_MASK_965 0x00001fff |
| |
| #define PFIT_AUTO_RATIOS _MMIO(dev_priv->info.display_mmio_offset + 0x61238) |
| |
| #define _VLV_BLC_PWM_CTL2_A (dev_priv->info.display_mmio_offset + 0x61250) |
| #define _VLV_BLC_PWM_CTL2_B (dev_priv->info.display_mmio_offset + 0x61350) |
| #define VLV_BLC_PWM_CTL2(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL2_A, \ |
| _VLV_BLC_PWM_CTL2_B) |
| |
| #define _VLV_BLC_PWM_CTL_A (dev_priv->info.display_mmio_offset + 0x61254) |
| #define _VLV_BLC_PWM_CTL_B (dev_priv->info.display_mmio_offset + 0x61354) |
| #define VLV_BLC_PWM_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL_A, \ |
| _VLV_BLC_PWM_CTL_B) |
| |
| #define _VLV_BLC_HIST_CTL_A (dev_priv->info.display_mmio_offset + 0x61260) |
| #define _VLV_BLC_HIST_CTL_B (dev_priv->info.display_mmio_offset + 0x61360) |
| #define VLV_BLC_HIST_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_HIST_CTL_A, \ |
| _VLV_BLC_HIST_CTL_B) |
| |
| /* Backlight control */ |
| #define BLC_PWM_CTL2 _MMIO(dev_priv->info.display_mmio_offset + 0x61250) /* 965+ only */ |
| #define BLM_PWM_ENABLE (1 << 31) |
| #define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ |
| #define BLM_PIPE_SELECT (1 << 29) |
| #define BLM_PIPE_SELECT_IVB (3 << 29) |
| #define BLM_PIPE_A (0 << 29) |
| #define BLM_PIPE_B (1 << 29) |
| #define BLM_PIPE_C (2 << 29) /* ivb + */ |
| #define BLM_TRANSCODER_A BLM_PIPE_A /* hsw */ |
| #define BLM_TRANSCODER_B BLM_PIPE_B |
| #define BLM_TRANSCODER_C BLM_PIPE_C |
| #define BLM_TRANSCODER_EDP (3 << 29) |
| #define BLM_PIPE(pipe) ((pipe) << 29) |
| #define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ |
| #define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) |
| #define BLM_PHASE_IN_ENABLE (1 << 25) |
| #define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24) |
| #define BLM_PHASE_IN_TIME_BASE_SHIFT (16) |
| #define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16) |
| #define BLM_PHASE_IN_COUNT_SHIFT (8) |
| #define BLM_PHASE_IN_COUNT_MASK (0xff << 8) |
| #define BLM_PHASE_IN_INCR_SHIFT (0) |
| #define BLM_PHASE_IN_INCR_MASK (0xff << 0) |
| #define BLC_PWM_CTL _MMIO(dev_priv->info.display_mmio_offset + 0x61254) |
| /* |
| * This is the most significant 15 bits of the number of backlight cycles in a |
| * complete cycle of the modulated backlight control. |
| * |
| * The actual value is this field multiplied by two. |
| */ |
| #define BACKLIGHT_MODULATION_FREQ_SHIFT (17) |
| #define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) |
| #define BLM_LEGACY_MODE (1 << 16) /* gen2 only */ |
| /* |
| * This is the number of cycles out of the backlight modulation cycle for which |
| * the backlight is on. |
| * |
| * This field must be no greater than the number of cycles in the complete |
| * backlight modulation cycle. |
| */ |
| #define BACKLIGHT_DUTY_CYCLE_SHIFT (0) |
| #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) |
| #define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) |
| #define BLM_POLARITY_PNV (1 << 0) /* pnv only */ |
| |
| #define BLC_HIST_CTL _MMIO(dev_priv->info.display_mmio_offset + 0x61260) |
| #define BLM_HISTOGRAM_ENABLE (1 << 31) |
| |
| /* New registers for PCH-split platforms. Safe where new bits show up, the |
| * register layout machtes with gen4 BLC_PWM_CTL[12]. */ |
| #define BLC_PWM_CPU_CTL2 _MMIO(0x48250) |
| #define BLC_PWM_CPU_CTL _MMIO(0x48254) |
| |
| #define HSW_BLC_PWM2_CTL _MMIO(0x48350) |
| |
| /* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is |
| * like the normal CTL from gen4 and earlier. Hooray for confusing naming. */ |
| #define BLC_PWM_PCH_CTL1 _MMIO(0xc8250) |
| #define BLM_PCH_PWM_ENABLE (1 << 31) |
| #define BLM_PCH_OVERRIDE_ENABLE (1 << 30) |
| #define BLM_PCH_POLARITY (1 << 29) |
| #define BLC_PWM_PCH_CTL2 _MMIO(0xc8254) |
| |
| #define UTIL_PIN_CTL _MMIO(0x48400) |
| #define UTIL_PIN_ENABLE (1 << 31) |
| |
| #define UTIL_PIN_PIPE(x) ((x) << 29) |
| #define UTIL_PIN_PIPE_MASK (3 << 29) |
| #define UTIL_PIN_MODE_PWM (1 << 24) |
| #define UTIL_PIN_MODE_MASK (0xf << 24) |
| #define UTIL_PIN_POLARITY (1 << 22) |
| |
| /* BXT backlight register definition. */ |
| #define _BXT_BLC_PWM_CTL1 0xC8250 |
| #define BXT_BLC_PWM_ENABLE (1 << 31) |
| #define BXT_BLC_PWM_POLARITY (1 << 29) |
| #define _BXT_BLC_PWM_FREQ1 0xC8254 |
| #define _BXT_BLC_PWM_DUTY1 0xC8258 |
| |
| #define _BXT_BLC_PWM_CTL2 0xC8350 |
| #define _BXT_BLC_PWM_FREQ2 0xC8354 |
| #define _BXT_BLC_PWM_DUTY2 0xC8358 |
| |
| #define BXT_BLC_PWM_CTL(controller) _MMIO_PIPE(controller, \ |
| _BXT_BLC_PWM_CTL1, _BXT_BLC_PWM_CTL2) |
| #define BXT_BLC_PWM_FREQ(controller) _MMIO_PIPE(controller, \ |
| _BXT_BLC_PWM_FREQ1, _BXT_BLC_PWM_FREQ2) |
| #define BXT_BLC_PWM_DUTY(controller) _MMIO_PIPE(controller, \ |
| _BXT_BLC_PWM_DUTY1, _BXT_BLC_PWM_DUTY2) |
| |
| #define PCH_GTC_CTL _MMIO(0xe7000) |
| #define PCH_GTC_ENABLE (1 << 31) |
| |
| /* TV port control */ |
| #define TV_CTL _MMIO(0x68000) |
| /* Enables the TV encoder */ |
| # define TV_ENC_ENABLE (1 << 31) |
| /* Sources the TV encoder input from pipe B instead of A. */ |
| # define TV_ENC_PIPEB_SELECT (1 << 30) |
| /* Outputs composite video (DAC A only) */ |
| # define TV_ENC_OUTPUT_COMPOSITE (0 << 28) |
| /* Outputs SVideo video (DAC B/C) */ |
| # define TV_ENC_OUTPUT_SVIDEO (1 << 28) |
| /* Outputs Component video (DAC A/B/C) */ |
| # define TV_ENC_OUTPUT_COMPONENT (2 << 28) |
| /* Outputs Composite and SVideo (DAC A/B/C) */ |
| # define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28) |
| # define TV_TRILEVEL_SYNC (1 << 21) |
| /* Enables slow sync generation (945GM only) */ |
| # define TV_SLOW_SYNC (1 << 20) |
| /* Selects 4x oversampling for 480i and 576p */ |
| # define TV_OVERSAMPLE_4X (0 << 18) |
| /* Selects 2x oversampling for 720p and 1080i */ |
| # define TV_OVERSAMPLE_2X (1 << 18) |
| /* Selects no oversampling for 1080p */ |
| # define TV_OVERSAMPLE_NONE (2 << 18) |
| /* Selects 8x oversampling */ |
| # define TV_OVERSAMPLE_8X (3 << 18) |
| /* Selects progressive mode rather than interlaced */ |
| # define TV_PROGRESSIVE (1 << 17) |
| /* Sets the colorburst to PAL mode. Required for non-M PAL modes. */ |
| # define TV_PAL_BURST (1 << 16) |
| /* Field for setting delay of Y compared to C */ |
| # define TV_YC_SKEW_MASK (7 << 12) |
| /* Enables a fix for 480p/576p standard definition modes on the 915GM only */ |
| # define TV_ENC_SDP_FIX (1 << 11) |
| /* |
| * Enables a fix for the 915GM only. |
| * |
| * Not sure what it does. |
| */ |
| # define TV_ENC_C0_FIX (1 << 10) |
| /* Bits that must be preserved by software */ |
| # define TV_CTL_SAVE ((1 << 11) | (3 << 9) | (7 << 6) | 0xf) |
| # define TV_FUSE_STATE_MASK (3 << 4) |
| /* Read-only state that reports all features enabled */ |
| # define TV_FUSE_STATE_ENABLED (0 << 4) |
| /* Read-only state that reports that Macrovision is disabled in hardware*/ |
| # define TV_FUSE_STATE_NO_MACROVISION (1 << 4) |
| /* Read-only state that reports that TV-out is disabled in hardware. */ |
| # define TV_FUSE_STATE_DISABLED (2 << 4) |
| /* Normal operation */ |
| # define TV_TEST_MODE_NORMAL (0 << 0) |
| /* Encoder test pattern 1 - combo pattern */ |
| # define TV_TEST_MODE_PATTERN_1 (1 << 0) |
| /* Encoder test pattern 2 - full screen vertical 75% color bars */ |
| # define TV_TEST_MODE_PATTERN_2 (2 << 0) |
| /* Encoder test pattern 3 - full screen horizontal 75% color bars */ |
| # define TV_TEST_MODE_PATTERN_3 (3 << 0) |
| /* Encoder test pattern 4 - random noise */ |
| # define TV_TEST_MODE_PATTERN_4 (4 << 0) |
| /* Encoder test pattern 5 - linear color ramps */ |
| # define TV_TEST_MODE_PATTERN_5 (5 << 0) |
| /* |
| * This test mode forces the DACs to 50% of full output. |
| * |
| * This is used for load detection in combination with TVDAC_SENSE_MASK |
| */ |
| # define TV_TEST_MODE_MONITOR_DETECT (7 << 0) |
| # define TV_TEST_MODE_MASK (7 << 0) |
| |
| #define TV_DAC _MMIO(0x68004) |
| # define TV_DAC_SAVE 0x00ffff00 |
| /* |
| * Reports that DAC state change logic has reported change (RO). |
| * |
| * This gets cleared when TV_DAC_STATE_EN is cleared |
| */ |
| # define TVDAC_STATE_CHG (1 << 31) |
| # define TVDAC_SENSE_MASK (7 << 28) |
| /* Reports that DAC A voltage is above the detect threshold */ |
| # define TVDAC_A_SENSE (1 << 30) |
| /* Reports that DAC B voltage is above the detect threshold */ |
| # define TVDAC_B_SENSE (1 << 29) |
| /* Reports that DAC C voltage is above the detect threshold */ |
| # define TVDAC_C_SENSE (1 << 28) |
| /* |
| * Enables DAC state detection logic, for load-based TV detection. |
| * |
| * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set |
| * to off, for load detection to work. |
| */ |
| # define TVDAC_STATE_CHG_EN (1 << 27) |
| /* Sets the DAC A sense value to high */ |
| # define TVDAC_A_SENSE_CTL (1 << 26) |
| /* Sets the DAC B sense value to high */ |
| # define TVDAC_B_SENSE_CTL (1 << 25) |
| /* Sets the DAC C sense value to high */ |
| # define TVDAC_C_SENSE_CTL (1 << 24) |
| /* Overrides the ENC_ENABLE and DAC voltage levels */ |
| # define DAC_CTL_OVERRIDE (1 << 7) |
| /* Sets the slew rate. Must be preserved in software */ |
| # define ENC_TVDAC_SLEW_FAST (1 << 6) |
| # define DAC_A_1_3_V (0 << 4) |
| # define DAC_A_1_1_V (1 << 4) |
| # define DAC_A_0_7_V (2 << 4) |
| # define DAC_A_MASK (3 << 4) |
| # define DAC_B_1_3_V (0 << 2) |
| # define DAC_B_1_1_V (1 << 2) |
| # define DAC_B_0_7_V (2 << 2) |
| # define DAC_B_MASK (3 << 2) |
| # define DAC_C_1_3_V (0 << 0) |
| # define DAC_C_1_1_V (1 << 0) |
| # define DAC_C_0_7_V (2 << 0) |
| # define DAC_C_MASK (3 << 0) |
| |
| /* |
| * CSC coefficients are stored in a floating point format with 9 bits of |
| * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n, |
| * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with |
| * -1 (0x3) being the only legal negative value. |
| */ |
| #define TV_CSC_Y _MMIO(0x68010) |
| # define TV_RY_MASK 0x07ff0000 |
| # define TV_RY_SHIFT 16 |
| # define TV_GY_MASK 0x00000fff |
| # define TV_GY_SHIFT 0 |
| |
| #define TV_CSC_Y2 _MMIO(0x68014) |
| # define TV_BY_MASK 0x07ff0000 |
| # define TV_BY_SHIFT 16 |
| /* |
| * Y attenuation for component video. |
| * |
| * Stored in 1.9 fixed point. |
| */ |
| # define TV_AY_MASK 0x000003ff |
| # define TV_AY_SHIFT 0 |
| |
| #define TV_CSC_U _MMIO(0x68018) |
| # define TV_RU_MASK 0x07ff0000 |
| # define TV_RU_SHIFT 16 |
| # define TV_GU_MASK 0x000007ff |
| # define TV_GU_SHIFT 0 |
| |
| #define TV_CSC_U2 _MMIO(0x6801c) |
| # define TV_BU_MASK 0x07ff0000 |
| # define TV_BU_SHIFT 16 |
| /* |
| * U attenuation for component video. |
| * |
| * Stored in 1.9 fixed point. |
| */ |
| # define TV_AU_MASK 0x000003ff |
| # define TV_AU_SHIFT 0 |
| |
| #define TV_CSC_V _MMIO(0x68020) |
| # define TV_RV_MASK 0x0fff0000 |
| # define TV_RV_SHIFT 16 |
| # define TV_GV_MASK 0x000007ff |
| # define TV_GV_SHIFT 0 |
| |
| #define TV_CSC_V2 _MMIO(0x68024) |
| # define TV_BV_MASK 0x07ff0000 |
| # define TV_BV_SHIFT 16 |
| /* |
| * V attenuation for component video. |
| * |
| * Stored in 1.9 fixed point. |
| */ |
| # define TV_AV_MASK 0x000007ff |
| # define TV_AV_SHIFT 0 |
| |
| #define TV_CLR_KNOBS _MMIO(0x68028) |
| /* 2s-complement brightness adjustment */ |
| # define TV_BRIGHTNESS_MASK 0xff000000 |
| # define TV_BRIGHTNESS_SHIFT 24 |
| /* Contrast adjustment, as a 2.6 unsigned floating point number */ |
| # define TV_CONTRAST_MASK 0x00ff0000 |
| # define TV_CONTRAST_SHIFT 16 |
| /* Saturation adjustment, as a 2.6 unsigned floating point number */ |
| # define TV_SATURATION_MASK 0x0000ff00 |
| # define TV_SATURATION_SHIFT 8 |
| /* Hue adjustment, as an integer phase angle in degrees */ |
| # define TV_HUE_MASK 0x000000ff |
| # define TV_HUE_SHIFT 0 |
| |
| #define TV_CLR_LEVEL _MMIO(0x6802c) |
| /* Controls the DAC level for black */ |
| # define TV_BLACK_LEVEL_MASK 0x01ff0000 |
| # define TV_BLACK_LEVEL_SHIFT 16 |
| /* Controls the DAC level for blanking */ |
| # define TV_BLANK_LEVEL_MASK 0x000001ff |
| # define TV_BLANK_LEVEL_SHIFT 0 |
| |
| #define TV_H_CTL_1 _MMIO(0x68030) |
| /* Number of pixels in the hsync. */ |
| # define TV_HSYNC_END_MASK 0x1fff0000 |
| # define TV_HSYNC_END_SHIFT 16 |
| /* Total number of pixels minus one in the line (display and blanking). */ |
| # define TV_HTOTAL_MASK 0x00001fff |
| # define TV_HTOTAL_SHIFT 0 |
| |
| #define TV_H_CTL_2 _MMIO(0x68034) |
| /* Enables the colorburst (needed for non-component color) */ |
| # define TV_BURST_ENA (1 << 31) |
| /* Offset of the colorburst from the start of hsync, in pixels minus one. */ |
| # define TV_HBURST_START_SHIFT 16 |
| # define TV_HBURST_START_MASK 0x1fff0000 |
| /* Length of the colorburst */ |
| # define TV_HBURST_LEN_SHIFT 0 |
| # define TV_HBURST_LEN_MASK 0x0001fff |
| |
| #define TV_H_CTL_3 _MMIO(0x68038) |
| /* End of hblank, measured in pixels minus one from start of hsync */ |
| # define TV_HBLANK_END_SHIFT 16 |
| # define TV_HBLANK_END_MASK 0x1fff0000 |
| /* Start of hblank, measured in pixels minus one from start of hsync */ |
| # define TV_HBLANK_START_SHIFT 0 |
| # define TV_HBLANK_START_MASK 0x0001fff |
| |
| #define TV_V_CTL_1 _MMIO(0x6803c) |
| /* XXX */ |
| # define TV_NBR_END_SHIFT 16 |
| # define TV_NBR_END_MASK 0x07ff0000 |
| /* XXX */ |
| # define TV_VI_END_F1_SHIFT 8 |
| # define TV_VI_END_F1_MASK 0x00003f00 |
| /* XXX */ |
| # define TV_VI_END_F2_SHIFT 0 |
| # define TV_VI_END_F2_MASK 0x0000003f |
| |
| #define TV_V_CTL_2 _MMIO(0x68040) |
| /* Length of vsync, in half lines */ |
| # define TV_VSYNC_LEN_MASK 0x07ff0000 |
| # define TV_VSYNC_LEN_SHIFT 16 |
| /* Offset of the start of vsync in field 1, measured in one less than the |
| * number of half lines. |
| */ |
| # define TV_VSYNC_START_F1_MASK 0x00007f00 |
| # define TV_VSYNC_START_F1_SHIFT 8 |
| /* |
| * Offset of the start of vsync in field 2, measured in one less than the |
| * number of half lines. |
| */ |
| # define TV_VSYNC_START_F2_MASK 0x0000007f |
| # define TV_VSYNC_START_F2_SHIFT 0 |
| |
| #define TV_V_CTL_3 _MMIO(0x68044) |
| /* Enables generation of the equalization signal */ |
| # define TV_EQUAL_ENA (1 << 31) |
| /* Length of vsync, in half lines */ |
| # define TV_VEQ_LEN_MASK 0x007f0000 |
| # define TV_VEQ_LEN_SHIFT 16 |
| /* Offset of the start of equalization in field 1, measured in one less than |
| * the number of half lines. |
| */ |
| # define TV_VEQ_START_F1_MASK 0x0007f00 |
| # define TV_VEQ_START_F1_SHIFT 8 |
| /* |
| * Offset of the start of equalization in field 2, measured in one less than |
| * the number of half lines. |
| */ |
| # define TV_VEQ_START_F2_MASK 0x000007f |
| # define TV_VEQ_START_F2_SHIFT 0 |
| |
| #define TV_V_CTL_4 _MMIO(0x68048) |
| /* |
| * Offset to start of vertical colorburst, measured in one less than the |
| * number of lines from vertical start. |
| */ |
| # define TV_VBURST_START_F1_MASK 0x003f0000 |
| # define TV_VBURST_START_F1_SHIFT 16 |
| /* |
| * Offset to the end of vertical colorburst, measured in one less than the |
| * number of lines from the start of NBR. |
| */ |
| # define TV_VBURST_END_F1_MASK 0x000000ff |
| # define TV_VBURST_END_F1_SHIFT 0 |
| |
| #define TV_V_CTL_5 _MMIO(0x6804c) |
| /* |
| * Offset to start of vertical colorburst, measured in one less than the |
| * number of lines from vertical start. |
| */ |
| # define TV_VBURST_START_F2_MASK 0x003f0000 |
| # define TV_VBURST_START_F2_SHIFT 16 |
| /* |
| * Offset to the end of vertical colorburst, measured in one less than the |
| * number of lines from the start of NBR. |
| */ |
| # define TV_VBURST_END_F2_MASK 0x000000ff |
| # define TV_VBURST_END_F2_SHIFT 0 |
| |
| #define TV_V_CTL_6 _MMIO(0x68050) |
| /* |
| * Offset to start of vertical colorburst, measured in one less than the |
| * number of lines from vertical start. |
| */ |
| # define TV_VBURST_START_F3_MASK 0x003f0000 |
| # define TV_VBURST_START_F3_SHIFT 16 |
| /* |
| * Offset to the end of vertical colorburst, measured in one less than the |
| * number of lines from the start of NBR. |
| */ |
| # define TV_VBURST_END_F3_MASK 0x000000ff |
| # define TV_VBURST_END_F3_SHIFT 0 |
| |
| #define TV_V_CTL_7 _MMIO(0x68054) |
| /* |
| * Offset to start of vertical colorburst, measured in one less than the |
| * number of lines from vertical start. |
| */ |
| # define TV_VBURST_START_F4_MASK 0x003f0000 |
| # define TV_VBURST_START_F4_SHIFT 16 |
| /* |
| * Offset to the end of vertical colorburst, measured in one less than the |
| * number of lines from the start of NBR. |
| */ |
| # define TV_VBURST_END_F4_MASK 0x000000ff |
| # define TV_VBURST_END_F4_SHIFT 0 |
| |
| #define TV_SC_CTL_1 _MMIO(0x68060) |
| /* Turns on the first subcarrier phase generation DDA */ |
| # define TV_SC_DDA1_EN (1 << 31) |
| /* Turns on the first subcarrier phase generation DDA */ |
| # define TV_SC_DDA2_EN (1 << 30) |
| /* Turns on the first subcarrier phase generation DDA */ |
| # define TV_SC_DDA3_EN (1 << 29) |
| /* Sets the subcarrier DDA to reset frequency every other field */ |
| # define TV_SC_RESET_EVERY_2 (0 << 24) |
| /* Sets the subcarrier DDA to reset frequency every fourth field */ |
| # define TV_SC_RESET_EVERY_4 (1 << 24) |
| /* Sets the subcarrier DDA to reset frequency every eighth field */ |
| # define TV_SC_RESET_EVERY_8 (2 << 24) |
| /* Sets the subcarrier DDA to never reset the frequency */ |
| # define TV_SC_RESET_NEVER (3 << 24) |
| /* Sets the peak amplitude of the colorburst.*/ |
| # define TV_BURST_LEVEL_MASK 0x00ff0000 |
| # define TV_BURST_LEVEL_SHIFT 16 |
| /* Sets the increment of the first subcarrier phase generation DDA */ |
| # define TV_SCDDA1_INC_MASK 0x00000fff |
| # define TV_SCDDA1_INC_SHIFT 0 |
| |
| #define TV_SC_CTL_2 _MMIO(0x68064) |
| /* Sets the rollover for the second subcarrier phase generation DDA */ |
| # define TV_SCDDA2_SIZE_MASK 0x7fff0000 |
| # define TV_SCDDA2_SIZE_SHIFT 16 |
| /* Sets the increent of the second subcarrier phase generation DDA */ |
| # define TV_SCDDA2_INC_MASK 0x00007fff |
| # define TV_SCDDA2_INC_SHIFT 0 |
| |
| #define TV_SC_CTL_3 _MMIO(0x68068) |
| /* Sets the rollover for the third subcarrier phase generation DDA */ |
| # define TV_SCDDA3_SIZE_MASK 0x7fff0000 |
| # define TV_SCDDA3_SIZE_SHIFT 16 |
| /* Sets the increent of the third subcarrier phase generation DDA */ |
| # define TV_SCDDA3_INC_MASK 0x00007fff |
| # define TV_SCDDA3_INC_SHIFT 0 |
| |
| #define TV_WIN_POS _MMIO(0x68070) |
| /* X coordinate of the display from the start of horizontal active */ |
| # define TV_XPOS_MASK 0x1fff0000 |
| # define TV_XPOS_SHIFT 16 |
| /* Y coordinate of the display from the start of vertical active (NBR) */ |
| # define TV_YPOS_MASK 0x00000fff |
| # define TV_YPOS_SHIFT 0 |
| |
| #define TV_WIN_SIZE _MMIO(0x68074) |
| /* Horizontal size of the display window, measured in pixels*/ |
| # define TV_XSIZE_MASK 0x1fff0000 |
| # define TV_XSIZE_SHIFT 16 |
| /* |
| * Vertical size of the display window, measured in pixels. |
| * |
| * Must be even for interlaced modes. |
| */ |
| # define TV_YSIZE_MASK 0x00000fff |
| # define TV_YSIZE_SHIFT 0 |
| |
| #define TV_FILTER_CTL_1 _MMIO(0x68080) |
| /* |
| * Enables automatic scaling calculation. |
| * |
| * If set, the rest of the registers are ignored, and the calculated values can |
| * be read back from the register. |
| */ |
| # define TV_AUTO_SCALE (1 << 31) |
| /* |
| * Disables the vertical filter. |
| * |
| * This is required on modes more than 1024 pixels wide */ |
| # define TV_V_FILTER_BYPASS (1 << 29) |
| /* Enables adaptive vertical filtering */ |
| # define TV_VADAPT (1 << 28) |
| # define TV_VADAPT_MODE_MASK (3 << 26) |
| /* Selects the least adaptive vertical filtering mode */ |
| # define TV_VADAPT_MODE_LEAST (0 << 26) |
| /* Selects the moderately adaptive vertical filtering mode */ |
| # define TV_VADAPT_MODE_MODERATE (1 << 26) |
| /* Selects the most adaptive vertical filtering mode */ |
| # define TV_VADAPT_MODE_MOST (3 << 26) |
| /* |
| * Sets the horizontal scaling factor. |
| * |
| * This should be the fractional part of the horizontal scaling factor divided |
| * by the oversampling rate. TV_HSCALE should be less than 1, and set to: |
| * |
| * (src width - 1) / ((oversample * dest width) - 1) |
| */ |
| # define TV_HSCALE_FRAC_MASK 0x00003fff |
| # define TV_HSCALE_FRAC_SHIFT 0 |
| |
| #define TV_FILTER_CTL_2 _MMIO(0x68084) |
| /* |
| * Sets the integer part of the 3.15 fixed-point vertical scaling factor. |
| * |
| * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1) |
| */ |
| # define TV_VSCALE_INT_MASK 0x00038000 |
| # define TV_VSCALE_INT_SHIFT 15 |
| /* |
| * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. |
| * |
| * \sa TV_VSCALE_INT_MASK |
| */ |
| # define TV_VSCALE_FRAC_MASK 0x00007fff |
| # define TV_VSCALE_FRAC_SHIFT 0 |
| |
| #define TV_FILTER_CTL_3 _MMIO(0x68088) |
| /* |
| * Sets the integer part of the 3.15 fixed-point vertical scaling factor. |
| * |
| * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1)) |
| * |
| * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. |
| */ |
| # define TV_VSCALE_IP_INT_MASK 0x00038000 |
| # define TV_VSCALE_IP_INT_SHIFT 15 |
| /* |
| * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. |
| * |
| * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. |
| * |
| * \sa TV_VSCALE_IP_INT_MASK |
| */ |
| # define TV_VSCALE_IP_FRAC_MASK 0x00007fff |
| # define TV_VSCALE_IP_FRAC_SHIFT 0 |
| |
| #define TV_CC_CONTROL _MMIO(0x68090) |
| # define TV_CC_ENABLE (1 << 31) |
| /* |
| * Specifies which field to send the CC data in. |
| * |
| * CC data is usually sent in field 0. |
| */ |
| # define TV_CC_FID_MASK (1 << 27) |
| # define TV_CC_FID_SHIFT 27 |
| /* Sets the horizontal position of the CC data. Usually 135. */ |
| # define TV_CC_HOFF_MASK 0x03ff0000 |
| # define TV_CC_HOFF_SHIFT 16 |
| /* Sets the vertical position of the CC data. Usually 21 */ |
| # define TV_CC_LINE_MASK 0x0000003f |
| # define TV_CC_LINE_SHIFT 0 |
| |
| #define TV_CC_DATA _MMIO(0x68094) |
| # define TV_CC_RDY (1 << 31) |
| /* Second word of CC data to be transmitted. */ |
| # define TV_CC_DATA_2_MASK 0x007f0000 |
| # define TV_CC_DATA_2_SHIFT 16 |
| /* First word of CC data to be transmitted. */ |
| # define TV_CC_DATA_1_MASK 0x0000007f |
| # define TV_CC_DATA_1_SHIFT 0 |
| |
| #define TV_H_LUMA(i) _MMIO(0x68100 + (i) * 4) /* 60 registers */ |
| #define TV_H_CHROMA(i) _MMIO(0x68200 + (i) * 4) /* 60 registers */ |
| #define TV_V_LUMA(i) _MMIO(0x68300 + (i) * 4) /* 43 registers */ |
| #define TV_V_CHROMA(i) _MMIO(0x68400 + (i) * 4) /* 43 registers */ |
| |
| /* Display Port */ |
| #define DP_A _MMIO(0x64000) /* eDP */ |
| #define DP_B _MMIO(0x64100) |
| #define DP_C _MMIO(0x64200) |
| #define DP_D _MMIO(0x64300) |
| |
| #define VLV_DP_B _MMIO(VLV_DISPLAY_BASE + 0x64100) |
| #define VLV_DP_C _MMIO(VLV_DISPLAY_BASE + 0x64200) |
| #define CHV_DP_D _MMIO(VLV_DISPLAY_BASE + 0x64300) |
| |
| #define DP_PORT_EN (1 << 31) |
| #define DP_PIPEB_SELECT (1 << 30) |
| #define DP_PIPE_MASK (1 << 30) |
| #define DP_PIPE_SELECT_CHV(pipe) ((pipe) << 16) |
| #define DP_PIPE_MASK_CHV (3 << 16) |
| |
| /* Link training mode - select a suitable mode for each stage */ |
| #define DP_LINK_TRAIN_PAT_1 (0 << 28) |
| #define DP_LINK_TRAIN_PAT_2 (1 << 28) |
| #define DP_LINK_TRAIN_PAT_IDLE (2 << 28) |
| #define DP_LINK_TRAIN_OFF (3 << 28) |
| #define DP_LINK_TRAIN_MASK (3 << 28) |
| #define DP_LINK_TRAIN_SHIFT 28 |
| #define DP_LINK_TRAIN_PAT_3_CHV (1 << 14) |
| #define DP_LINK_TRAIN_MASK_CHV ((3 << 28)|(1<<14)) |
| |
| /* CPT Link training mode */ |
| #define DP_LINK_TRAIN_PAT_1_CPT (0 << 8) |
| #define DP_LINK_TRAIN_PAT_2_CPT (1 << 8) |
| #define DP_LINK_TRAIN_PAT_IDLE_CPT (2 << 8) |
| #define DP_LINK_TRAIN_OFF_CPT (3 << 8) |
| #define DP_LINK_TRAIN_MASK_CPT (7 << 8) |
| #define DP_LINK_TRAIN_SHIFT_CPT 8 |
| |
| /* Signal voltages. These are mostly controlled by the other end */ |
| #define DP_VOLTAGE_0_4 (0 << 25) |
| #define DP_VOLTAGE_0_6 (1 << 25) |
| #define DP_VOLTAGE_0_8 (2 << 25) |
| #define DP_VOLTAGE_1_2 (3 << 25) |
| #define DP_VOLTAGE_MASK (7 << 25) |
| #define DP_VOLTAGE_SHIFT 25 |
| |
| /* Signal pre-emphasis levels, like voltages, the other end tells us what |
| * they want |
| */ |
| #define DP_PRE_EMPHASIS_0 (0 << 22) |
| #define DP_PRE_EMPHASIS_3_5 (1 << 22) |
| #define DP_PRE_EMPHASIS_6 (2 << 22) |
| #define DP_PRE_EMPHASIS_9_5 (3 << 22) |
| #define DP_PRE_EMPHASIS_MASK (7 << 22) |
| #define DP_PRE_EMPHASIS_SHIFT 22 |
| |
| /* How many wires to use. I guess 3 was too hard */ |
| #define DP_PORT_WIDTH(width) (((width) - 1) << 19) |
| #define DP_PORT_WIDTH_MASK (7 << 19) |
| #define DP_PORT_WIDTH_SHIFT 19 |
| |
| /* Mystic DPCD version 1.1 special mode */ |
| #define DP_ENHANCED_FRAMING (1 << 18) |
| |
| /* eDP */ |
| #define DP_PLL_FREQ_270MHZ (0 << 16) |
| #define DP_PLL_FREQ_162MHZ (1 << 16) |
| #define DP_PLL_FREQ_MASK (3 << 16) |
| |
| /* locked once port is enabled */ |
| #define DP_PORT_REVERSAL (1 << 15) |
| |
| /* eDP */ |
| #define DP_PLL_ENABLE (1 << 14) |
| |
| /* sends the clock on lane 15 of the PEG for debug */ |
| #define DP_CLOCK_OUTPUT_ENABLE (1 << 13) |
| |
| #define DP_SCRAMBLING_DISABLE (1 << 12) |
| #define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7) |
| |
| /* limit RGB values to avoid confusing TVs */ |
| #define DP_COLOR_RANGE_16_235 (1 << 8) |
| |
| /* Turn on the audio link */ |
| #define DP_AUDIO_OUTPUT_ENABLE (1 << 6) |
| |
| /* vs and hs sync polarity */ |
| #define DP_SYNC_VS_HIGH (1 << 4) |
| #define DP_SYNC_HS_HIGH (1 << 3) |
| |
| /* A fantasy */ |
| #define DP_DETECTED (1 << 2) |
| |
| /* The aux channel provides a way to talk to the |
| * signal sink for DDC etc. Max packet size supported |
| * is 20 bytes in each direction, hence the 5 fixed |
| * data registers |
| */ |
| #define _DPA_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64010) |
| #define _DPA_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64014) |
| #define _DPA_AUX_CH_DATA2 (dev_priv->info.display_mmio_offset + 0x64018) |
| #define _DPA_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6401c) |
| #define _DPA_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64020) |
| #define _DPA_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64024) |
| |
| #define _DPB_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64110) |
| #define _DPB_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64114) |
| #define _DPB_AUX_CH_DATA2 (dev_priv->info.display_mmio_offset + 0x64118) |
| #define _DPB_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6411c) |
| #define _DPB_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64120) |
| #define _DPB_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64124) |
| |
| #define _DPC_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64210) |
| #define _DPC_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64214) |
| #define _DPC_AUX_CH_DATA2 (dev_priv->info.display_mmio_offset + 0x64218) |
| #define _DPC_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6421c) |
| #define _DPC_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64220) |
| #define _DPC_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64224) |
| |
| #define _DPD_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64310) |
| #define _DPD_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64314) |
| #define _DPD_AUX_CH_DATA2 (dev_priv->info.display_mmio_offset + 0x64318) |
| #define _DPD_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6431c) |
| #define _DPD_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64320) |
| #define _DPD_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64324) |
| |
| #define DP_AUX_CH_CTL(port) _MMIO_PORT(port, _DPA_AUX_CH_CTL, _DPB_AUX_CH_CTL) |
| #define DP_AUX_CH_DATA(port, i) _MMIO(_PORT(port, _DPA_AUX_CH_DATA1, _DPB_AUX_CH_DATA1) + (i) * 4) /* 5 registers */ |
| |
| #define DP_AUX_CH_CTL_SEND_BUSY (1 << 31) |
| #define DP_AUX_CH_CTL_DONE (1 << 30) |
| #define DP_AUX_CH_CTL_INTERRUPT (1 << 29) |
| #define DP_AUX_CH_CTL_TIME_OUT_ERROR (1 << 28) |
| #define DP_AUX_CH_CTL_TIME_OUT_400us (0 << 26) |
| #define DP_AUX_CH_CTL_TIME_OUT_600us (1 << 26) |
| #define DP_AUX_CH_CTL_TIME_OUT_800us (2 << 26) |
| #define DP_AUX_CH_CTL_TIME_OUT_1600us (3 << 26) |
| #define DP_AUX_CH_CTL_TIME_OUT_MASK (3 << 26) |
| #define DP_AUX_CH_CTL_RECEIVE_ERROR (1 << 25) |
| #define DP_AUX_CH_CTL_MESSAGE_SIZE_MASK (0x1f << 20) |
| #define DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT 20 |
| #define DP_AUX_CH_CTL_PRECHARGE_2US_MASK (0xf << 16) |
| #define DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT 16 |
| #define DP_AUX_CH_CTL_AUX_AKSV_SELECT (1 << 15) |
| #define DP_AUX_CH_CTL_MANCHESTER_TEST (1 << 14) |
| #define DP_AUX_CH_CTL_SYNC_TEST (1 << 13) |
| #define DP_AUX_CH_CTL_DEGLITCH_TEST (1 << 12) |
| #define DP_AUX_CH_CTL_PRECHARGE_TEST (1 << 11) |
| #define DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK (0x7ff) |
| #define DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT 0 |
| #define DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL (1 << 14) |
| #define DP_AUX_CH_CTL_FS_DATA_AUX_REG_SKL (1 << 13) |
| #define DP_AUX_CH_CTL_GTC_DATA_AUX_REG_SKL (1 << 12) |
| #define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL_MASK (0x1f << 5) |
| #define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5) |
| #define DP_AUX_CH_CTL_SYNC_PULSE_SKL(c) ((c) - 1) |
| |
| /* |
| * Computing GMCH M and N values for the Display Port link |
| * |
| * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes |
| * |
| * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz) |
| * |
| * The GMCH value is used internally |
| * |
| * bytes_per_pixel is the number of bytes coming out of the plane, |
| * which is after the LUTs, so we want the bytes for our color format. |
| * For our current usage, this is always 3, one byte for R, G and B. |
| */ |
| #define _PIPEA_DATA_M_G4X 0x70050 |
| #define _PIPEB_DATA_M_G4X 0x71050 |
| |
| /* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */ |
| #define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */ |
| #define TU_SIZE_SHIFT 25 |
| #define TU_SIZE_MASK (0x3f << 25) |
| |
| #define DATA_LINK_M_N_MASK (0xffffff) |
| #define DATA_LINK_N_MAX (0x800000) |
| |
| #define _PIPEA_DATA_N_G4X 0x70054 |
| #define _PIPEB_DATA_N_G4X 0x71054 |
| #define PIPE_GMCH_DATA_N_MASK (0xffffff) |
| |
| /* |
| * Computing Link M and N values for the Display Port link |
| * |
| * Link M / N = pixel_clock / ls_clk |
| * |
| * (the DP spec calls pixel_clock the 'strm_clk') |
| * |
| * The Link value is transmitted in the Main Stream |
| * Attributes and VB-ID. |
| */ |
| |
| #define _PIPEA_LINK_M_G4X 0x70060 |
| #define _PIPEB_LINK_M_G4X 0x71060 |
| #define PIPEA_DP_LINK_M_MASK (0xffffff) |
| |
| #define _PIPEA_LINK_N_G4X 0x70064 |
| #define _PIPEB_LINK_N_G4X 0x71064 |
| #define PIPEA_DP_LINK_N_MASK (0xffffff) |
| |
| #define PIPE_DATA_M_G4X(pipe) _MMIO_PIPE(pipe, _PIPEA_DATA_M_G4X, _PIPEB_DATA_M_G4X) |
| #define PIPE_DATA_N_G4X(pipe) _MMIO_PIPE(pipe, _PIPEA_DATA_N_G4X, _PIPEB_DATA_N_G4X) |
| #define PIPE_LINK_M_G4X(pipe) _MMIO_PIPE(pipe, _PIPEA_LINK_M_G4X, _PIPEB_LINK_M_G4X) |
| #define PIPE_LINK_N_G4X(pipe) _MMIO_PIPE(pipe, _PIPEA_LINK_N_G4X, _PIPEB_LINK_N_G4X) |
| |
| /* Display & cursor control */ |
| |
| /* Pipe A */ |
| #define _PIPEADSL 0x70000 |
| #define DSL_LINEMASK_GEN2 0x00000fff |
| #define DSL_LINEMASK_GEN3 0x00001fff |
| #define _PIPEACONF 0x70008 |
| #define PIPECONF_ENABLE (1<<31) |
| #define PIPECONF_DISABLE 0 |
| #define PIPECONF_DOUBLE_WIDE (1<<30) |
| #define I965_PIPECONF_ACTIVE (1<<30) |
| #define PIPECONF_DSI_PLL_LOCKED (1<<29) /* vlv & pipe A only */ |
| #define PIPECONF_FRAME_START_DELAY_MASK (3<<27) |
| #define PIPECONF_SINGLE_WIDE 0 |
| #define PIPECONF_PIPE_UNLOCKED 0 |
| #define PIPECONF_PIPE_LOCKED (1<<25) |
| #define PIPECONF_PALETTE 0 |
| #define PIPECONF_GAMMA (1<<24) |
| #define PIPECONF_FORCE_BORDER (1<<25) |
| #define PIPECONF_INTERLACE_MASK (7 << 21) |
| #define PIPECONF_INTERLACE_MASK_HSW (3 << 21) |
| /* Note that pre-gen3 does not support interlaced display directly. Panel |
| * fitting must be disabled on pre-ilk for interlaced. */ |
| #define PIPECONF_PROGRESSIVE (0 << 21) |
| #define PIPECONF_INTERLACE_W_SYNC_SHIFT_PANEL (4 << 21) /* gen4 only */ |
| #define PIPECONF_INTERLACE_W_SYNC_SHIFT (5 << 21) /* gen4 only */ |
| #define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) |
| #define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) /* gen3 only */ |
| /* Ironlake and later have a complete new set of values for interlaced. PFIT |
| * means panel fitter required, PF means progressive fetch, DBL means power |
| * saving pixel doubling. */ |
| #define PIPECONF_PFIT_PF_INTERLACED_ILK (1 << 21) |
| #define PIPECONF_INTERLACED_ILK (3 << 21) |
| #define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */ |
| #define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */ |
| #define PIPECONF_INTERLACE_MODE_MASK (7 << 21) |
| #define PIPECONF_EDP_RR_MODE_SWITCH (1 << 20) |
| #define PIPECONF_CXSR_DOWNCLOCK (1<<16) |
| #define PIPECONF_EDP_RR_MODE_SWITCH_VLV (1 << 14) |
| #define PIPECONF_COLOR_RANGE_SELECT (1 << 13) |
| #define PIPECONF_BPC_MASK (0x7 << 5) |
| #define PIPECONF_8BPC (0<<5) |
| #define PIPECONF_10BPC (1<<5) |
| #define PIPECONF_6BPC (2<<5) |
| #define PIPECONF_12BPC (3<<5) |
| #define PIPECONF_DITHER_EN (1<<4) |
| #define PIPECONF_DITHER_TYPE_MASK (0x0000000c) |
| #define PIPECONF_DITHER_TYPE_SP (0<<2) |
| #define PIPECONF_DITHER_TYPE_ST1 (1<<2) |
| #define PIPECONF_DITHER_TYPE_ST2 (2<<2) |
| #define PIPECONF_DITHER_TYPE_TEMP (3<<2) |
| #define _PIPEASTAT 0x70024 |
| #define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31) |
| #define SPRITE1_FLIP_DONE_INT_EN_VLV (1UL<<30) |
| #define PIPE_CRC_ERROR_ENABLE (1UL<<29) |
| #define PIPE_CRC_DONE_ENABLE (1UL<<28) |
| #define PERF_COUNTER2_INTERRUPT_EN (1UL<<27) |
| #define PIPE_GMBUS_EVENT_ENABLE (1UL<<27) |
| #define PLANE_FLIP_DONE_INT_EN_VLV (1UL<<26) |
| #define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) |
| #define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25) |
| #define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24) |
| #define PIPE_DPST_EVENT_ENABLE (1UL<<23) |
| #define SPRITE0_FLIP_DONE_INT_EN_VLV (1UL<<22) |
| #define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22) |
| #define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) |
| #define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) |
| #define PIPE_B_PSR_INTERRUPT_ENABLE_VLV (1UL<<19) |
| #define PERF_COUNTER_INTERRUPT_EN (1UL<<19) |
| #define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */ |
| #define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ |
| #define PIPE_FRAMESTART_INTERRUPT_ENABLE (1UL<<17) |
| #define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17) |
| #define PIPEA_HBLANK_INT_EN_VLV (1UL<<16) |
| #define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16) |
| #define SPRITE1_FLIP_DONE_INT_STATUS_VLV (1UL<<15) |
| #define SPRITE0_FLIP_DONE_INT_STATUS_VLV (1UL<<14) |
| #define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) |
| #define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12) |
| #define PERF_COUNTER2_INTERRUPT_STATUS (1UL<<11) |
| #define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11) |
| #define PLANE_FLIP_DONE_INT_STATUS_VLV (1UL<<10) |
| #define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10) |
| #define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9) |
| #define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8) |
| #define PIPE_DPST_EVENT_STATUS (1UL<<7) |
| #define PIPE_A_PSR_STATUS_VLV (1UL<<6) |
| #define PIPE_LEGACY_BLC_EVENT_STATUS (1UL<<6) |
| #define PIPE_ODD_FIELD_INTERRUPT_STATUS (1UL<<5) |
| #define PIPE_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4) |
| #define PIPE_B_PSR_STATUS_VLV (1UL<<3) |
| #define PERF_COUNTER_INTERRUPT_STATUS (1UL<<3) |
| #define PIPE_HOTPLUG_TV_INTERRUPT_STATUS (1UL<<2) /* pre-965 */ |
| #define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ |
| #define PIPE_FRAMESTART_INTERRUPT_STATUS (1UL<<1) |
| #define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1) |
| #define PIPE_HBLANK_INT_STATUS (1UL<<0) |
| #define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0) |
| |
| #define PIPESTAT_INT_ENABLE_MASK 0x7fff0000 |
| #define PIPESTAT_INT_STATUS_MASK 0x0000ffff |
| |
| #define PIPE_A_OFFSET 0x70000 |
| #define PIPE_B_OFFSET 0x71000 |
| #define PIPE_C_OFFSET 0x72000 |
| #define CHV_PIPE_C_OFFSET 0x74000 |
| /* |
| * There's actually no pipe EDP. Some pipe registers have |
| * simply shifted from the pipe to the transcoder, while |
| * keeping their original offset. Thus we need PIPE_EDP_OFFSET |
| * to access such registers in transcoder EDP. |
| */ |
| #define PIPE_EDP_OFFSET 0x7f000 |
| |
| #define _MMIO_PIPE2(pipe, reg) _MMIO(dev_priv->info.pipe_offsets[pipe] - \ |
| dev_priv->info.pipe_offsets[PIPE_A] + (reg) + \ |
| dev_priv->info.display_mmio_offset) |
| |
| #define PIPECONF(pipe) _MMIO_PIPE2(pipe, _PIPEACONF) |
| #define PIPEDSL(pipe) _MMIO_PIPE2(pipe, _PIPEADSL) |
| #define PIPEFRAME(pipe) _MMIO_PIPE2(pipe, _PIPEAFRAMEHIGH) |
| #define PIPEFRAMEPIXEL(pipe) _MMIO_PIPE2(pipe, _PIPEAFRAMEPIXEL) |
| #define PIPESTAT(pipe) _MMIO_PIPE2(pipe, _PIPEASTAT) |
| |
| #define _PIPE_MISC_A 0x70030 |
| #define _PIPE_MISC_B 0x71030 |
| #define PIPEMISC_DITHER_BPC_MASK (7<<5) |
| #define PIPEMISC_DITHER_8_BPC (0<<5) |
| #define PIPEMISC_DITHER_10_BPC (1<<5) |
| #define PIPEMISC_DITHER_6_BPC (2<<5) |
| #define PIPEMISC_DITHER_12_BPC (3<<5) |
| #define PIPEMISC_DITHER_ENABLE (1<<4) |
| #define PIPEMISC_DITHER_TYPE_MASK (3<<2) |
| #define PIPEMISC_DITHER_TYPE_SP (0<<2) |
| #define PIPEMISC(pipe) _MMIO_PIPE2(pipe, _PIPE_MISC_A) |
| |
| #define VLV_DPFLIPSTAT _MMIO(VLV_DISPLAY_BASE + 0x70028) |
| #define PIPEB_LINE_COMPARE_INT_EN (1<<29) |
| #define PIPEB_HLINE_INT_EN (1<<28) |
| #define PIPEB_VBLANK_INT_EN (1<<27) |
| #define SPRITED_FLIP_DONE_INT_EN (1<<26) |
| #define SPRITEC_FLIP_DONE_INT_EN (1<<25) |
| #define PLANEB_FLIP_DONE_INT_EN (1<<24) |
| #define PIPE_PSR_INT_EN (1<<22) |
| #define PIPEA_LINE_COMPARE_INT_EN (1<<21) |
| #define PIPEA_HLINE_INT_EN (1<<20) |
| #define PIPEA_VBLANK_INT_EN (1<<19) |
| #define SPRITEB_FLIP_DONE_INT_EN (1<<18) |
| #define SPRITEA_FLIP_DONE_INT_EN (1<<17) |
| #define PLANEA_FLIPDONE_INT_EN (1<<16) |
| #define PIPEC_LINE_COMPARE_INT_EN (1<<13) |
| #define PIPEC_HLINE_INT_EN (1<<12) |
| #define PIPEC_VBLANK_INT_EN (1<<11) |
| #define SPRITEF_FLIPDONE_INT_EN (1<<10) |
| #define SPRITEE_FLIPDONE_INT_EN (1<<9) |
| #define PLANEC_FLIPDONE_INT_EN (1<<8) |
| |
| #define DPINVGTT _MMIO(VLV_DISPLAY_BASE + 0x7002c) /* VLV/CHV only */ |
| #define SPRITEF_INVALID_GTT_INT_EN (1<<27) |
| #define SPRITEE_INVALID_GTT_INT_EN (1<<26) |
| #define PLANEC_INVALID_GTT_INT_EN (1<<25) |
| #define CURSORC_INVALID_GTT_INT_EN (1<<24) |
| #define CURSORB_INVALID_GTT_INT_EN (1<<23) |
| #define CURSORA_INVALID_GTT_INT_EN (1<<22) |
| #define SPRITED_INVALID_GTT_INT_EN (1<<21) |
| #define SPRITEC_INVALID_GTT_INT_EN (1<<20) |
| #define PLANEB_INVALID_GTT_INT_EN (1<<19) |
| #define SPRITEB_INVALID_GTT_INT_EN (1<<18) |
| #define SPRITEA_INVALID_GTT_INT_EN (1<<17) |
| #define PLANEA_INVALID_GTT_INT_EN (1<<16) |
| #define DPINVGTT_EN_MASK 0xff0000 |
| #define DPINVGTT_EN_MASK_CHV 0xfff0000 |
| #define SPRITEF_INVALID_GTT_STATUS (1<<11) |
| #define SPRITEE_INVALID_GTT_STATUS (1<<10) |
| #define PLANEC_INVALID_GTT_STATUS (1<<9) |
| #define CURSORC_INVALID_GTT_STATUS (1<<8) |
| #define CURSORB_INVALID_GTT_STATUS (1<<7) |
| #define CURSORA_INVALID_GTT_STATUS (1<<6) |
| #define SPRITED_INVALID_GTT_STATUS (1<<5) |
| #define SPRITEC_INVALID_GTT_STATUS (1<<4) |
| #define PLANEB_INVALID_GTT_STATUS (1<<3) |
| #define SPRITEB_INVALID_GTT_STATUS (1<<2) |
| #define SPRITEA_INVALID_GTT_STATUS (1<<1) |
| #define PLANEA_INVALID_GTT_STATUS (1<<0) |
| #define DPINVGTT_STATUS_MASK 0xff |
| #define DPINVGTT_STATUS_MASK_CHV 0xfff |
| |
| #define DSPARB _MMIO(dev_priv->info.display_mmio_offset + 0x70030) |
| #define DSPARB_CSTART_MASK (0x7f << 7) |
| #define DSPARB_CSTART_SHIFT 7 |
| #define DSPARB_BSTART_MASK (0x7f) |
| #define DSPARB_BSTART_SHIFT 0 |
| #define DSPARB_BEND_SHIFT 9 /* on 855 */ |
| #define DSPARB_AEND_SHIFT 0 |
| #define DSPARB_SPRITEA_SHIFT_VLV 0 |
| #define DSPARB_SPRITEA_MASK_VLV (0xff << 0) |
| #define DSPARB_SPRITEB_SHIFT_VLV 8 |
| #define DSPARB_SPRITEB_MASK_VLV (0xff << 8) |
| #define DSPARB_SPRITEC_SHIFT_VLV 16 |
| #define DSPARB_SPRITEC_MASK_VLV (0xff << 16) |
| #define DSPARB_SPRITED_SHIFT_VLV 24 |
| #define DSPARB_SPRITED_MASK_VLV (0xff << 24) |
| #define DSPARB2 _MMIO(VLV_DISPLAY_BASE + 0x70060) /* vlv/chv */ |
| #define DSPARB_SPRITEA_HI_SHIFT_VLV 0 |
| #define DSPARB_SPRITEA_HI_MASK_VLV (0x1 << 0) |
| #define DSPARB_SPRITEB_HI_SHIFT_VLV 4 |
| #define DSPARB_SPRITEB_HI_MASK_VLV (0x1 << 4) |
| #define DSPARB_SPRITEC_HI_SHIFT_VLV 8 |
| #define DSPARB_SPRITEC_HI_MASK_VLV (0x1 << 8) |
| #define DSPARB_SPRITED_HI_SHIFT_VLV 12 |
| #define DSPARB_SPRITED_HI_MASK_VLV (0x1 << 12) |
| #define DSPARB_SPRITEE_HI_SHIFT_VLV 16 |
| #define DSPARB_SPRITEE_HI_MASK_VLV (0x1 << 16) |
| #define DSPARB_SPRITEF_HI_SHIFT_VLV 20 |
| #define DSPARB_SPRITEF_HI_MASK_VLV (0x1 << 20) |
| #define DSPARB3 _MMIO(VLV_DISPLAY_BASE + 0x7006c) /* chv */ |
| #define DSPARB_SPRITEE_SHIFT_VLV 0 |
| #define DSPARB_SPRITEE_MASK_VLV (0xff << 0) |
| #define DSPARB_SPRITEF_SHIFT_VLV 8 |
| #define DSPARB_SPRITEF_MASK_VLV (0xff << 8) |
| |
| /* pnv/gen4/g4x/vlv/chv */ |
| #define DSPFW1 _MMIO(dev_priv->info.display_mmio_offset + 0x70034) |
| #define DSPFW_SR_SHIFT 23 |
| #define DSPFW_SR_MASK (0x1ff<<23) |
| #define DSPFW_CURSORB_SHIFT 16 |
| #define DSPFW_CURSORB_MASK (0x3f<<16) |
| #define DSPFW_PLANEB_SHIFT 8 |
| #define DSPFW_PLANEB_MASK (0x7f<<8) |
| #define DSPFW_PLANEB_MASK_VLV (0xff<<8) /* vlv/chv */ |
| #define DSPFW_PLANEA_SHIFT 0 |
| #define DSPFW_PLANEA_MASK (0x7f<<0) |
| #define DSPFW_PLANEA_MASK_VLV (0xff<<0) /* vlv/chv */ |
| #define DSPFW2 _MMIO(dev_priv->info.display_mmio_offset + 0x70038) |
| #define DSPFW_FBC_SR_EN (1<<31) /* g4x */ |
| #define DSPFW_FBC_SR_SHIFT 28 |
| #define DSPFW_FBC_SR_MASK (0x7<<28) /* g4x */ |
| #define DSPFW_FBC_HPLL_SR_SHIFT 24 |
| #define DSPFW_FBC_HPLL_SR_MASK (0xf<<24) /* g4x */ |
| #define DSPFW_SPRITEB_SHIFT (16) |
| #define DSPFW_SPRITEB_MASK (0x7f<<16) /* g4x */ |
| #define DSPFW_SPRITEB_MASK_VLV (0xff<<16) /* vlv/chv */ |
| #define DSPFW_CURSORA_SHIFT 8 |
| #define DSPFW_CURSORA_MASK (0x3f<<8) |
| #define DSPFW_PLANEC_OLD_SHIFT 0 |
| #define DSPFW_PLANEC_OLD_MASK (0x7f<<0) /* pre-gen4 sprite C */ |
| #define DSPFW_SPRITEA_SHIFT 0 |
| #define DSPFW_SPRITEA_MASK (0x7f<<0) /* g4x */ |
| #define DSPFW_SPRITEA_MASK_VLV (0xff<<0) /* vlv/chv */ |
| #define DSPFW3 _MMIO(dev_priv->info.display_mmio_offset + 0x7003c) |
| #define DSPFW_HPLL_SR_EN (1<<31) |
| #define PINEVIEW_SELF_REFRESH_EN (1<<30) |
| #define DSPFW_CURSOR_SR_SHIFT 24 |
| #define DSPFW_CURSOR_SR_MASK (0x3f<<24) |
| #define DSPFW_HPLL_CURSOR_SHIFT 16 |
| #define DSPFW_HPLL_CURSOR_MASK (0x3f<<16) |
| #define DSPFW_HPLL_SR_SHIFT 0 |
| #define DSPFW_HPLL_SR_MASK (0x1ff<<0) |
| |
| /* vlv/chv */ |
| #define DSPFW4 _MMIO(VLV_DISPLAY_BASE + 0x70070) |
| #define DSPFW_SPRITEB_WM1_SHIFT 16 |
| #define DSPFW_SPRITEB_WM1_MASK (0xff<<16) |
| #define DSPFW_CURSORA_WM1_SHIFT 8 |
| #define DSPFW_CURSORA_WM1_MASK (0x3f<<8) |
| #define DSPFW_SPRITEA_WM1_SHIFT 0 |
| #define DSPFW_SPRITEA_WM1_MASK (0xff<<0) |
| #define DSPFW5 _MMIO(VLV_DISPLAY_BASE + 0x70074) |
| #define DSPFW_PLANEB_WM1_SHIFT 24 |
| #define DSPFW_PLANEB_WM1_MASK (0xff<<24) |
| #define DSPFW_PLANEA_WM1_SHIFT 16 |
| #define DSPFW_PLANEA_WM1_MASK (0xff<<16) |
| #define DSPFW_CURSORB_WM1_SHIFT 8 |
| #define DSPFW_CURSORB_WM1_MASK (0x3f<<8) |
| #define DSPFW_CURSOR_SR_WM1_SHIFT 0 |
| #define DSPFW_CURSOR_SR_WM1_MASK (0x3f<<0) |
| #define DSPFW6 _MMIO(VLV_DISPLAY_BASE + 0x70078) |
| #define DSPFW_SR_WM1_SHIFT 0 |
| #define DSPFW_SR_WM1_MASK (0x1ff<<0) |
| #define DSPFW7 _MMIO(VLV_DISPLAY_BASE + 0x7007c) |
| #define DSPFW7_CHV _MMIO(VLV_DISPLAY_BASE + 0x700b4) /* wtf #1? */ |
| #define DSPFW_SPRITED_WM1_SHIFT 24 |
| #define DSPFW_SPRITED_WM1_MASK (0xff<<24) |
| #define DSPFW_SPRITED_SHIFT 16 |
| #define DSPFW_SPRITED_MASK_VLV (0xff<<16) |
| #define DSPFW_SPRITEC_WM1_SHIFT 8 |
| #define DSPFW_SPRITEC_WM1_MASK (0xff<<8) |
| #define DSPFW_SPRITEC_SHIFT 0 |
| #define DSPFW_SPRITEC_MASK_VLV (0xff<<0) |
| #define DSPFW8_CHV _MMIO(VLV_DISPLAY_BASE + 0x700b8) |
| #define DSPFW_SPRITEF_WM1_SHIFT 24 |
| #define DSPFW_SPRITEF_WM1_MASK (0xff<<24) |
| #define DSPFW_SPRITEF_SHIFT 16 |
| #define DSPFW_SPRITEF_MASK_VLV (0xff<<16) |
| #define DSPFW_SPRITEE_WM1_SHIFT 8 |
| #define DSPFW_SPRITEE_WM1_MASK (0xff<<8) |
| #define DSPFW_SPRITEE_SHIFT 0 |
| #define DSPFW_SPRITEE_MASK_VLV (0xff<<0) |
| #define DSPFW9_CHV _MMIO(VLV_DISPLAY_BASE + 0x7007c) /* wtf #2? */ |
| #define DSPFW_PLANEC_WM1_SHIFT 24 |
| #define DSPFW_PLANEC_WM1_MASK (0xff<<24) |
| #define DSPFW_PLANEC_SHIFT 16 |
| #define DSPFW_PLANEC_MASK_VLV (0xff<<16) |
| #define DSPFW_CURSORC_WM1_SHIFT 8 |
| #define DSPFW_CURSORC_WM1_MASK (0x3f<<16) |
| #define DSPFW_CURSORC_SHIFT 0 |
| #define DSPFW_CURSORC_MASK (0x3f<<0) |
| |
| /* vlv/chv high order bits */ |
| #define DSPHOWM _MMIO(VLV_DISPLAY_BASE + 0x70064) |
| #define DSPFW_SR_HI_SHIFT 24 |
| #define DSPFW_SR_HI_MASK (3<<24) /* 2 bits for chv, 1 for vlv */ |
| #define DSPFW_SPRITEF_HI_SHIFT 23 |
| #define DSPFW_SPRITEF_HI_MASK (1<<23) |
| #define DSPFW_SPRITEE_HI_SHIFT 22 |
| #define DSPFW_SPRITEE_HI_MASK (1<<22) |
| #define DSPFW_PLANEC_HI_SHIFT 21 |
| #define DSPFW_PLANEC_HI_MASK (1<<21) |
| #define DSPFW_SPRITED_HI_SHIFT 20 |
| #define DSPFW_SPRITED_HI_MASK (1<<20) |
| #define DSPFW_SPRITEC_HI_SHIFT 16 |
| #define DSPFW_SPRITEC_HI_MASK (1<<16) |
| #define DSPFW_PLANEB_HI_SHIFT 12 |
| #define DSPFW_PLANEB_HI_MASK (1<<12) |
| #define DSPFW_SPRITEB_HI_SHIFT 8 |
| #define DSPFW_SPRITEB_HI_MASK (1<<8) |
| #define DSPFW_SPRITEA_HI_SHIFT 4 |
| #define DSPFW_SPRITEA_HI_MASK (1<<4) |
| #define DSPFW_PLANEA_HI_SHIFT 0 |
| #define DSPFW_PLANEA_HI_MASK (1<<0) |
| #define DSPHOWM1 _MMIO(VLV_DISPLAY_BASE + 0x70068) |
| #define DSPFW_SR_WM1_HI_SHIFT 24 |
| #define DSPFW_SR_WM1_HI_MASK (3<<24) /* 2 bits for chv, 1 for vlv */ |
| #define DSPFW_SPRITEF_WM1_HI_SHIFT 23 |
| #define DSPFW_SPRITEF_WM1_HI_MASK (1<<23) |
| #define DSPFW_SPRITEE_WM1_HI_SHIFT 22 |
| #define DSPFW_SPRITEE_WM1_HI_MASK (1<<22) |
| #define DSPFW_PLANEC_WM1_HI_SHIFT 21 |
| #define DSPFW_PLANEC_WM1_HI_MASK (1<<21) |
| #define DSPFW_SPRITED_WM1_HI_SHIFT 20 |
| #define DSPFW_SPRITED_WM1_HI_MASK (1<<20) |
| #define DSPFW_SPRITEC_WM1_HI_SHIFT 16 |
| #define DSPFW_SPRITEC_WM1_HI_MASK (1<<16) |
| #define DSPFW_PLANEB_WM1_HI_SHIFT 12 |
| #define DSPFW_PLANEB_WM1_HI_MASK (1<<12) |
| #define DSPFW_SPRITEB_WM1_HI_SHIFT 8 |
| #define DSPFW_SPRITEB_WM1_HI_MASK (1<<8) |
| #define DSPFW_SPRITEA_WM1_HI_SHIFT 4 |
| #define DSPFW_SPRITEA_WM1_HI_MASK (1<<4) |
| #define DSPFW_PLANEA_WM1_HI_SHIFT 0 |
| #define DSPFW_PLANEA_WM1_HI_MASK (1<<0) |
| |
| /* drain latency register values*/ |
| #define VLV_DDL(pipe) _MMIO(VLV_DISPLAY_BASE + 0x70050 + 4 * (pipe)) |
| #define DDL_CURSOR_SHIFT 24 |
| #define DDL_SPRITE_SHIFT(sprite) (8+8*(sprite)) |
| #define DDL_PLANE_SHIFT 0 |
| #define DDL_PRECISION_HIGH (1<<7) |
| #define DDL_PRECISION_LOW (0<<7) |
| #define DRAIN_LATENCY_MASK 0x7f |
| |
| #define CBR1_VLV _MMIO(VLV_DISPLAY_BASE + 0x70400) |
| #define CBR_PND_DEADLINE_DISABLE (1<<31) |
| #define CBR_PWM_CLOCK_MUX_SELECT (1<<30) |
| |
| #define CBR4_VLV _MMIO(VLV_DISPLAY_BASE + 0x70450) |
| #define CBR_DPLLBMD_PIPE_C (1<<29) |
| #define CBR_DPLLBMD_PIPE_B (1<<18) |
| |
| /* FIFO watermark sizes etc */ |
| #define G4X_FIFO_LINE_SIZE 64 |
| #define I915_FIFO_LINE_SIZE 64 |
| #define I830_FIFO_LINE_SIZE 32 |
| |
| #define VALLEYVIEW_FIFO_SIZE 255 |
| #define G4X_FIFO_SIZE 127 |
| #define I965_FIFO_SIZE 512 |
| #define I945_FIFO_SIZE 127 |
| #define I915_FIFO_SIZE 95 |
| #define I855GM_FIFO_SIZE 127 /* In cachelines */ |
| #define I830_FIFO_SIZE 95 |
| |
| #define VALLEYVIEW_MAX_WM 0xff |
| #define G4X_MAX_WM 0x3f |
| #define I915_MAX_WM 0x3f |
| |
| #define PINEVIEW_DISPLAY_FIFO 512 /* in 64byte unit */ |
| #define PINEVIEW_FIFO_LINE_SIZE 64 |
| #define PINEVIEW_MAX_WM 0x1ff |
| #define PINEVIEW_DFT_WM 0x3f |
| #define PINEVIEW_DFT_HPLLOFF_WM 0 |
| #define PINEVIEW_GUARD_WM 10 |
| #define PINEVIEW_CURSOR_FIFO 64 |
| #define PINEVIEW_CURSOR_MAX_WM 0x3f |
| #define PINEVIEW_CURSOR_DFT_WM 0 |
| #define PINEVIEW_CURSOR_GUARD_WM 5 |
| |
| #define VALLEYVIEW_CURSOR_MAX_WM 64 |
| #define I965_CURSOR_FIFO 64 |
| #define I965_CURSOR_MAX_WM 32 |
| #define I965_CURSOR_DFT_WM 8 |
| |
| /* Watermark register definitions for SKL */ |
| #define _CUR_WM_A_0 0x70140 |
| #define _CUR_WM_B_0 0x71140 |
| #define _PLANE_WM_1_A_0 0x70240 |
| #define _PLANE_WM_1_B_0 0x71240 |
| #define _PLANE_WM_2_A_0 0x70340 |
| #define _PLANE_WM_2_B_0 0x71340 |
| #define _PLANE_WM_TRANS_1_A_0 0x70268 |
| #define _PLANE_WM_TRANS_1_B_0 0x71268 |
| #define _PLANE_WM_TRANS_2_A_0 0x70368 |
| #define _PLANE_WM_TRANS_2_B_0 0x71368 |
| #define _CUR_WM_TRANS_A_0 0x70168 |
| #define _CUR_WM_TRANS_B_0 0x71168 |
| #define PLANE_WM_EN (1 << 31) |
| #define PLANE_WM_LINES_SHIFT 14 |
| #define PLANE_WM_LINES_MASK 0x1f |
| #define PLANE_WM_BLOCKS_MASK 0x3ff |
| |
| #define _CUR_WM_0(pipe) _PIPE(pipe, _CUR_WM_A_0, _CUR_WM_B_0) |
| #define CUR_WM(pipe, level) _MMIO(_CUR_WM_0(pipe) + ((4) * (level))) |
| #define CUR_WM_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_TRANS_A_0, _CUR_WM_TRANS_B_0) |
| |
| #define _PLANE_WM_1(pipe) _PIPE(pipe, _PLANE_WM_1_A_0, _PLANE_WM_1_B_0) |
| #define _PLANE_WM_2(pipe) _PIPE(pipe, _PLANE_WM_2_A_0, _PLANE_WM_2_B_0) |
| #define _PLANE_WM_BASE(pipe, plane) \ |
| _PLANE(plane, _PLANE_WM_1(pipe), _PLANE_WM_2(pipe)) |
| #define PLANE_WM(pipe, plane, level) \ |
| _MMIO(_PLANE_WM_BASE(pipe, plane) + ((4) * (level))) |
| #define _PLANE_WM_TRANS_1(pipe) \ |
| _PIPE(pipe, _PLANE_WM_TRANS_1_A_0, _PLANE_WM_TRANS_1_B_0) |
| #define _PLANE_WM_TRANS_2(pipe) \ |
| _PIPE(pipe, _PLANE_WM_TRANS_2_A_0, _PLANE_WM_TRANS_2_B_0) |
| #define PLANE_WM_TRANS(pipe, plane) \ |
| _MMIO(_PLANE(plane, _PLANE_WM_TRANS_1(pipe), _PLANE_WM_TRANS_2(pipe))) |
| |
| /* define the Watermark register on Ironlake */ |
| #define WM0_PIPEA_ILK _MMIO(0x45100) |
| #define WM0_PIPE_PLANE_MASK (0xffff<<16) |
| #define WM0_PIPE_PLANE_SHIFT 16 |
| #define WM0_PIPE_SPRITE_MASK (0xff<<8) |
| #define WM0_PIPE_SPRITE_SHIFT 8 |
| #define WM0_PIPE_CURSOR_MASK (0xff) |
| |
| #define WM0_PIPEB_ILK _MMIO(0x45104) |
| #define WM0_PIPEC_IVB _MMIO(0x45200) |
| #define WM1_LP_ILK _MMIO(0x45108) |
| #define WM1_LP_SR_EN (1<<31) |
| #define WM1_LP_LATENCY_SHIFT 24 |
| #define WM1_LP_LATENCY_MASK (0x7f<<24) |
| #define WM1_LP_FBC_MASK (0xf<<20) |
| #define WM1_LP_FBC_SHIFT 20 |
| #define WM1_LP_FBC_SHIFT_BDW 19 |
| #define WM1_LP_SR_MASK (0x7ff<<8) |
| #define WM1_LP_SR_SHIFT 8 |
| #define WM1_LP_CURSOR_MASK (0xff) |
| #define WM2_LP_ILK _MMIO(0x4510c) |
| #define WM2_LP_EN (1<<31) |
| #define WM3_LP_ILK _MMIO(0x45110) |
| #define WM3_LP_EN (1<<31) |
| #define WM1S_LP_ILK _MMIO(0x45120) |
| #define WM2S_LP_IVB _MMIO(0x45124) |
| #define WM3S_LP_IVB _MMIO(0x45128) |
| #define WM1S_LP_EN (1<<31) |
| |
| #define HSW_WM_LP_VAL(lat, fbc, pri, cur) \ |
| (WM3_LP_EN | ((lat) << WM1_LP_LATENCY_SHIFT) | \ |
| ((fbc) << WM1_LP_FBC_SHIFT) | ((pri) << WM1_LP_SR_SHIFT) | (cur)) |
| |
| /* Memory latency timer register */ |
| #define MLTR_ILK _MMIO(0x11222) |
| #define MLTR_WM1_SHIFT 0 |
| #define MLTR_WM2_SHIFT 8 |
| /* the unit of memory self-refresh latency time is 0.5us */ |
| #define ILK_SRLT_MASK 0x3f |
| |
| |
| /* the address where we get all kinds of latency value */ |
| #define SSKPD _MMIO(0x5d10) |
| #define SSKPD_WM_MASK 0x3f |
| #define SSKPD_WM0_SHIFT 0 |
| #define SSKPD_WM1_SHIFT 8 |
| #define SSKPD_WM2_SHIFT 16 |
| #define SSKPD_WM3_SHIFT 24 |
| |
| /* |
| * The two pipe frame counter registers are not synchronized, so |
| * reading a stable value is somewhat tricky. The following code |
| * should work: |
| * |
| * do { |
| * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> |
| * PIPE_FRAME_HIGH_SHIFT; |
| * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >> |
| * PIPE_FRAME_LOW_SHIFT); |
| * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> |
| * PIPE_FRAME_HIGH_SHIFT); |
| * } while (high1 != high2); |
| * frame = (high1 << 8) | low1; |
| */ |
| #define _PIPEAFRAMEHIGH 0x70040 |
| #define PIPE_FRAME_HIGH_MASK 0x0000ffff |
| #define PIPE_FRAME_HIGH_SHIFT 0 |
| #define _PIPEAFRAMEPIXEL 0x70044 |
| #define PIPE_FRAME_LOW_MASK 0xff000000 |
| #define PIPE_FRAME_LOW_SHIFT 24 |
| #define PIPE_PIXEL_MASK 0x00ffffff |
| #define PIPE_PIXEL_SHIFT 0 |
| /* GM45+ just has to be different */ |
| #define _PIPEA_FRMCOUNT_G4X 0x70040 |
| #define _PIPEA_FLIPCOUNT_G4X 0x70044 |
| #define PIPE_FRMCOUNT_G4X(pipe) _MMIO_PIPE2(pipe, _PIPEA_FRMCOUNT_G4X) |
| #define PIPE_FLIPCOUNT_G4X(pipe) _MMIO_PIPE2(pipe, _PIPEA_FLIPCOUNT_G4X) |
| |
| /* Cursor A & B regs */ |
| #define _CURACNTR 0x70080 |
| /* Old style CUR*CNTR flags (desktop 8xx) */ |
| #define CURSOR_ENABLE 0x80000000 |
| #define CURSOR_GAMMA_ENABLE 0x40000000 |
| #define CURSOR_STRIDE_SHIFT 28 |
| #define CURSOR_STRIDE(x) ((ffs(x)-9) << CURSOR_STRIDE_SHIFT) /* 256,512,1k,2k */ |
| #define CURSOR_PIPE_CSC_ENABLE (1<<24) |
| #define CURSOR_FORMAT_SHIFT 24 |
| #define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT) |
| #define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT) |
| #define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT) |
| #define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT) |
| #define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT) |
| #define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT) |
| /* New style CUR*CNTR flags */ |
| #define CURSOR_MODE 0x27 |
| #define CURSOR_MODE_DISABLE 0x00 |
| #define CURSOR_MODE_128_32B_AX 0x02 |
| #define CURSOR_MODE_256_32B_AX 0x03 |
| #define CURSOR_MODE_64_32B_AX 0x07 |
| #define CURSOR_MODE_128_ARGB_AX ((1 << 5) | CURSOR_MODE_128_32B_AX) |
| #define CURSOR_MODE_256_ARGB_AX ((1 << 5) | CURSOR_MODE_256_32B_AX) |
| #define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) |
| #define MCURSOR_PIPE_SELECT (1 << 28) |
| #define MCURSOR_PIPE_A 0x00 |
| #define MCURSOR_PIPE_B (1 << 28) |
| #define MCURSOR_GAMMA_ENABLE (1 << 26) |
| #define CURSOR_ROTATE_180 (1<<15) |
| #define CURSOR_TRICKLE_FEED_DISABLE (1 << 14) |
| #define _CURABASE 0x70084 |
| #define _CURAPOS 0x70088 |
| #define CURSOR_POS_MASK 0x007FF |
| #define CURSOR_POS_SIGN 0x8000 |
| #define CURSOR_X_SHIFT 0 |
| #define CURSOR_Y_SHIFT 16 |
| #define CURSIZE _MMIO(0x700a0) |
| #define _CURBCNTR 0x700c0 |
| #define _CURBBASE 0x700c4 |
| #define _CURBPOS 0x700c8 |
| |
| #define _CURBCNTR_IVB 0x71080 |
| #define _CURBBASE_IVB 0x71084 |
| #define _CURBPOS_IVB 0x71088 |
| |
| #define _CURSOR2(pipe, reg) _MMIO(dev_priv->info.cursor_offsets[(pipe)] - \ |
| dev_priv->info.cursor_offsets[PIPE_A] + (reg) + \ |
| dev_priv->info.display_mmio_offset) |
| |
| #define CURCNTR(pipe) _CURSOR2(pipe, _CURACNTR) |
| #define CURBASE(pipe) _CURSOR2(pipe, _CURABASE) |
| #define CURPOS(pipe) _CURSOR2(pipe, _CURAPOS) |
| |
| #define CURSOR_A_OFFSET 0x70080 |
| #define CURSOR_B_OFFSET 0x700c0 |
| #define CHV_CURSOR_C_OFFSET 0x700e0 |
| #define IVB_CURSOR_B_OFFSET 0x71080 |
| #define IVB_CURSOR_C_OFFSET 0x72080 |
| |
| /* Display A control */ |
| #define _DSPACNTR 0x70180 |
| #define DISPLAY_PLANE_ENABLE (1<<31) |
| #define DISPLAY_PLANE_DISABLE 0 |
| #define DISPPLANE_GAMMA_ENABLE (1<<30) |
| #define DISPPLANE_GAMMA_DISABLE 0 |
| #define DISPPLANE_PIXFORMAT_MASK (0xf<<26) |
| #define DISPPLANE_YUV422 (0x0<<26) |
| #define DISPPLANE_8BPP (0x2<<26) |
| #define DISPPLANE_BGRA555 (0x3<<26) |
| #define DISPPLANE_BGRX555 (0x4<<26) |
| #define DISPPLANE_BGRX565 (0x5<<26) |
| #define DISPPLANE_BGRX888 (0x6<<26) |
| #define DISPPLANE_BGRA888 (0x7<<26) |
| #define DISPPLANE_RGBX101010 (0x8<<26) |
| #define DISPPLANE_RGBA101010 (0x9<<26) |
| #define DISPPLANE_BGRX101010 (0xa<<26) |
| #define DISPPLANE_RGBX161616 (0xc<<26) |
| #define DISPPLANE_RGBX888 (0xe<<26) |
| #define DISPPLANE_RGBA888 (0xf<<26) |
| #define DISPPLANE_STEREO_ENABLE (1<<25) |
| #define DISPPLANE_STEREO_DISABLE 0 |
| #define DISPPLANE_PIPE_CSC_ENABLE (1<<24) |
| #define DISPPLANE_SEL_PIPE_SHIFT 24 |
| #define DISPPLANE_SEL_PIPE_MASK (3<<DISPPLANE_SEL_PIPE_SHIFT) |
| #define DISPPLANE_SEL_PIPE_A 0 |
| #define DISPPLANE_SEL_PIPE_B (1<<DISPPLANE_SEL_PIPE_SHIFT) |
| #define DISPPLANE_SRC_KEY_ENABLE (1<<22) |
| #define DISPPLANE_SRC_KEY_DISABLE 0 |
| #define DISPPLANE_LINE_DOUBLE (1<<20) |
| #define DISPPLANE_NO_LINE_DOUBLE 0 |
| #define DISPPLANE_STEREO_POLARITY_FIRST 0 |
| #define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) |
| #define DISPPLANE_ALPHA_PREMULTIPLY (1<<16) /* CHV pipe B */ |
| #define DISPPLANE_ROTATE_180 (1<<15) |
| #define DISPPLANE_TRICKLE_FEED_DISABLE (1<<14) /* Ironlake */ |
| #define DISPPLANE_TILED (1<<10) |
| #define DISPPLANE_MIRROR (1<<8) /* CHV pipe B */ |
| #define _DSPAADDR 0x70184 |
| #define _DSPASTRIDE 0x70188 |
| #define _DSPAPOS 0x7018C /* reserved */ |
| #define _DSPASIZE 0x70190 |
| #define _DSPASURF 0x7019C /* 965+ only */ |
| #define _DSPATILEOFF 0x701A4 /* 965+ only */ |
| #define _DSPAOFFSET 0x701A4 /* HSW */ |
| #define _DSPASURFLIVE 0x701AC |
| |
| #define DSPCNTR(plane) _MMIO_PIPE2(plane, _DSPACNTR) |
| #define DSPADDR(plane) _MMIO_PIPE2(plane, _DSPAADDR) |
| #define DSPSTRIDE(plane) _MMIO_PIPE2(plane, _DSPASTRIDE) |
| #define DSPPOS(plane) _MMIO_PIPE2(plane, _DSPAPOS) |
| #define DSPSIZE(plane) _MMIO_PIPE2(plane, _DSPASIZE) |
| #define DSPSURF(plane) _MMIO_PIPE2(plane, _DSPASURF) |
| #define DSPTILEOFF(plane) _MMIO_PIPE2(plane, _DSPATILEOFF) |
| #define DSPLINOFF(plane) DSPADDR(plane) |
| #define DSPOFFSET(plane) _MMIO_PIPE2(plane, _DSPAOFFSET) |
| #define DSPSURFLIVE(plane) _MMIO_PIPE2(plane, _DSPASURFLIVE) |
| |
| /* CHV pipe B blender and primary plane */ |
| #define _CHV_BLEND_A 0x60a00 |
| #define CHV_BLEND_LEGACY (0<<30) |
| #define CHV_BLEND_ANDROID (1<<30) |
| #define CHV_BLEND_MPO (2<<30) |
| #define CHV_BLEND_MASK (3<<30) |
| #define _CHV_CANVAS_A 0x60a04 |
| #define _PRIMPOS_A 0x60a08 |
| #define _PRIMSIZE_A 0x60a0c |
| #define _PRIMCNSTALPHA_A 0x60a10 |
| #define PRIM_CONST_ALPHA_ENABLE (1<<31) |
| |
| #define CHV_BLEND(pipe) _MMIO_TRANS2(pipe, _CHV_BLEND_A) |
| #define CHV_CANVAS(pipe) _MMIO_TRANS2(pipe, _CHV_CANVAS_A) |
| #define PRIMPOS(plane) _MMIO_TRANS2(plane, _PRIMPOS_A) |
| #define PRIMSIZE(plane) _MMIO_TRANS2(plane, _PRIMSIZE_A) |
| #define PRIMCNSTALPHA(plane) _MMIO_TRANS2(plane, _PRIMCNSTALPHA_A) |
| |
| /* Display/Sprite base address macros */ |
| #define DISP_BASEADDR_MASK (0xfffff000) |
| #define I915_LO_DISPBASE(val) (val & ~DISP_BASEADDR_MASK) |
| #define I915_HI_DISPBASE(val) (val & DISP_BASEADDR_MASK) |
| |
| /* |
| * VBIOS flags |
| * gen2: |
| * [00:06] alm,mgm |
| * [10:16] all |
| * [30:32] alm,mgm |
| * gen3+: |
| * [00:0f] all |
| * [10:1f] all |
| * [30:32] all |
| */ |
| #define SWF0(i) _MMIO(dev_priv->info.display_mmio_offset + 0x70410 + (i) * 4) |
| #define SWF1(i) _MMIO(dev_priv->info.display_mmio_offset + 0x71410 + (i) * 4) |
| #define SWF3(i) _MMIO(dev_priv->info.display_mmio_offset + 0x72414 + (i) * 4) |
| #define SWF_ILK(i) _MMIO(0x4F000 + (i) * 4) |
| |
| /* Pipe B */ |
| #define _PIPEBDSL (dev_priv->info.display_mmio_offset + 0x71000) |
| #define _PIPEBCONF (dev_priv->info.display_mmio_offset + 0x71008) |
| #define _PIPEBSTAT (dev_priv->info.display_mmio_offset + 0x71024) |
| #define _PIPEBFRAMEHIGH 0x71040 |
| #define _PIPEBFRAMEPIXEL 0x71044 |
| #define _PIPEB_FRMCOUNT_G4X (dev_priv->info.display_mmio_offset + 0x71040) |
| #define _PIPEB_FLIPCOUNT_G4X (dev_priv->info.display_mmio_offset + 0x71044) |
| |
| |
| /* Display B control */ |
| #define _DSPBCNTR (dev_priv->info.display_mmio_offset + 0x71180) |
| #define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) |
| #define DISPPLANE_ALPHA_TRANS_DISABLE 0 |
| #define DISPPLANE_SPRITE_ABOVE_DISPLAY 0 |
| #define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) |
| #define _DSPBADDR (dev_priv->info.display_mmio_offset + 0x71184) |
| #define _DSPBSTRIDE (dev_priv->info.display_mmio_offset + 0x71188) |
| #define _DSPBPOS (dev_priv->info.display_mmio_offset + 0x7118C) |
| #define _DSPBSIZE (dev_priv->info.display_mmio_offset + 0x71190) |
| #define _DSPBSURF (dev_priv->info.display_mmio_offset + 0x7119C) |
| #define _DSPBTILEOFF (dev_priv->info.display_mmio_offset + 0x711A4) |
| #define _DSPBOFFSET (dev_priv->info.display_mmio_offset + 0x711A4) |
| #define _DSPBSURFLIVE (dev_priv->info.display_mmio_offset + 0x711AC) |
| |
| /* Sprite A control */ |
| #define _DVSACNTR 0x72180 |
| #define DVS_ENABLE (1<<31) |
| #define DVS_GAMMA_ENABLE (1<<30) |
| #define DVS_PIXFORMAT_MASK (3<<25) |
| #define DVS_FORMAT_YUV422 (0<<25) |
| #define DVS_FORMAT_RGBX101010 (1<<25) |
| #define DVS_FORMAT_RGBX888 (2<<25) |
| #define DVS_FORMAT_RGBX161616 (3<<25) |
| #define DVS_PIPE_CSC_ENABLE (1<<24) |
| #define DVS_SOURCE_KEY (1<<22) |
| #define DVS_RGB_ORDER_XBGR (1<<20) |
| #define DVS_YUV_BYTE_ORDER_MASK (3<<16) |
| #define DVS_YUV_ORDER_YUYV (0<<16) |
| #define DVS_YUV_ORDER_UYVY (1<<16) |
| #define DVS_YUV_ORDER_YVYU (2<<16) |
| #define DVS_YUV_ORDER_VYUY (3<<16) |
| #define DVS_ROTATE_180 (1<<15) |
| #define DVS_DEST_KEY (1<<2) |
| #define DVS_TRICKLE_FEED_DISABLE (1<<14) |
| #define DVS_TILED (1<<10) |
| #define _DVSALINOFF 0x72184 |
| #define _DVSASTRIDE 0x72188 |
| #define _DVSAPOS 0x7218c |
| #define _DVSASIZE 0x72190 |
| #define _DVSAKEYVAL 0x72194 |
| #define _DVSAKEYMSK 0x72198 |
| #define _DVSASURF 0x7219c |
| #define _DVSAKEYMAXVAL 0x721a0 |
| #define _DVSATILEOFF 0x721a4 |
| #define _DVSASURFLIVE 0x721ac |
| #define _DVSASCALE 0x72204 |
| #define DVS_SCALE_ENABLE (1<<31) |
| #define DVS_FILTER_MASK (3<<29) |
| #define DVS_FILTER_MEDIUM (0<<29) |
| #define DVS_FILTER_ENHANCING (1<<29) |
| #define DVS_FILTER_SOFTENING (2<<29) |
| #define DVS_VERTICAL_OFFSET_HALF (1<<28) /* must be enabled below */ |
| #define DVS_VERTICAL_OFFSET_ENABLE (1<<27) |
| #define _DVSAGAMC 0x72300 |
| |
| #define _DVSBCNTR 0x73180 |
| #define _DVSBLINOFF 0x73184 |
| #define _DVSBSTRIDE 0x73188 |
| #define _DVSBPOS 0x7318c |
| #define _DVSBSIZE 0x73190 |
| #define _DVSBKEYVAL 0x73194 |
| #define _DVSBKEYMSK 0x73198 |
| #define _DVSBSURF 0x7319c |
| #define _DVSBKEYMAXVAL 0x731a0 |
| #define _DVSBTILEOFF 0x731a4 |
| #define _DVSBSURFLIVE 0x731ac |
| #define _DVSBSCALE 0x73204 |
| #define _DVSBGAMC 0x73300 |
| |
| #define DVSCNTR(pipe) _MMIO_PIPE(pipe, _DVSACNTR, _DVSBCNTR) |
| #define DVSLINOFF(pipe) _MMIO_PIPE(pipe, _DVSALINOFF, _DVSBLINOFF) |
| #define DVSSTRIDE(pipe) _MMIO_PIPE(pipe, _DVSASTRIDE, _DVSBSTRIDE) |
| #define DVSPOS(pipe) _MMIO_PIPE(pipe, _DVSAPOS, _DVSBPOS) |
| #define DVSSURF(pipe) _MMIO_PIPE(pipe, _DVSASURF, _DVSBSURF) |
| #define DVSKEYMAX(pipe) _MMIO_PIPE(pipe, _DVSAKEYMAXVAL, _DVSBKEYMAXVAL) |
| #define DVSSIZE(pipe) _MMIO_PIPE(pipe, _DVSASIZE, _DVSBSIZE) |
| #define DVSSCALE(pipe) _MMIO_PIPE(pipe, _DVSASCALE, _DVSBSCALE) |
| #define DVSTILEOFF(pipe) _MMIO_PIPE(pipe, _DVSATILEOFF, _DVSBTILEOFF) |
| #define DVSKEYVAL(pipe) _MMIO_PIPE(pipe, _DVSAKEYVAL, _DVSBKEYVAL) |
| #define DVSKEYMSK(pipe) _MMIO_PIPE(pipe, _DVSAKEYMSK, _DVSBKEYMSK) |
| #define DVSSURFLIVE(pipe) _MMIO_PIPE(pipe, _DVSASURFLIVE, _DVSBSURFLIVE) |
| |
| #define _SPRA_CTL 0x70280 |
| #define SPRITE_ENABLE (1<<31) |
| #define SPRITE_GAMMA_ENABLE (1<<30) |
| #define SPRITE_PIXFORMAT_MASK (7<<25) |
| #define SPRITE_FORMAT_YUV422 (0<<25) |
| #define SPRITE_FORMAT_RGBX101010 (1<<25) |
| #define SPRITE_FORMAT_RGBX888 (2<<25) |
| #define SPRITE_FORMAT_RGBX161616 (3<<25) |
| #define SPRITE_FORMAT_YUV444 (4<<25) |
| #define SPRITE_FORMAT_XR_BGR101010 (5<<25) /* Extended range */ |
| #define SPRITE_PIPE_CSC_ENABLE (1<<24) |
| #define SPRITE_SOURCE_KEY (1<<22) |
| #define SPRITE_RGB_ORDER_RGBX (1<<20) /* only for 888 and 161616 */ |
| #define SPRITE_YUV_TO_RGB_CSC_DISABLE (1<<19) |
| #define SPRITE_YUV_CSC_FORMAT_BT709 (1<<18) /* 0 is BT601 */ |
| #define SPRITE_YUV_BYTE_ORDER_MASK (3<<16) |
| #define SPRITE_YUV_ORDER_YUYV (0<<16) |
| #define SPRITE_YUV_ORDER_UYVY (1<<16) |
| #define SPRITE_YUV_ORDER_YVYU (2<<16) |
| #define SPRITE_YUV_ORDER_VYUY (3<<16) |
| #define SPRITE_ROTATE_180 (1<<15) |
| #define SPRITE_TRICKLE_FEED_DISABLE (1<<14) |
| #define SPRITE_INT_GAMMA_ENABLE (1<<13) |
| #define SPRITE_TILED (1<<10) |
| #define SPRITE_DEST_KEY (1<<2) |
| #define _SPRA_LINOFF 0x70284 |
| #define _SPRA_STRIDE 0x70288 |
| #define _SPRA_POS 0x7028c |
| #define _SPRA_SIZE 0x70290 |
| #define _SPRA_KEYVAL 0x70294 |
| #define _SPRA_KEYMSK 0x70298 |
| #define _SPRA_SURF 0x7029c |
| #define _SPRA_KEYMAX 0x702a0 |
| #define _SPRA_TILEOFF 0x702a4 |
| #define _SPRA_OFFSET 0x702a4 |
| #define _SPRA_SURFLIVE 0x702ac |
| #define _SPRA_SCALE 0x70304 |
| #define SPRITE_SCALE_ENABLE (1<<31) |
| #define SPRITE_FILTER_MASK (3<<29) |
| #define SPRITE_FILTER_MEDIUM (0<<29) |
| #define SPRITE_FILTER_ENHANCING (1<<29) |
| #define SPRITE_FILTER_SOFTENING (2<<29) |
| #define SPRITE_VERTICAL_OFFSET_HALF (1<<28) /* must be enabled below */ |
| #define SPRITE_VERTICAL_OFFSET_ENABLE (1<<27) |
| #define _SPRA_GAMC 0x70400 |
| |
| #define _SPRB_CTL 0x71280 |
| #define _SPRB_LINOFF 0x71284 |
| #define _SPRB_STRIDE 0x71288 |
| #define _SPRB_POS 0x7128c |
| #define _SPRB_SIZE 0x71290 |
| #define _SPRB_KEYVAL 0x71294 |
| #define _SPRB_KEYMSK 0x71298 |
| #define _SPRB_SURF 0x7129c |
| #define _SPRB_KEYMAX 0x712a0 |
| #define _SPRB_TILEOFF 0x712a4 |
| #define _SPRB_OFFSET 0x712a4 |
| #define _SPRB_SURFLIVE 0x712ac |
| #define _SPRB_SCALE 0x71304 |
| #define _SPRB_GAMC 0x71400 |
| |
| #define SPRCTL(pipe) _MMIO_PIPE(pipe, _SPRA_CTL, _SPRB_CTL) |
| #define SPRLINOFF(pipe) _MMIO_PIPE(pipe, _SPRA_LINOFF, _SPRB_LINOFF) |
| #define SPRSTRIDE(pipe) _MMIO_PIPE(pipe, _SPRA_STRIDE, _SPRB_STRIDE) |
| #define SPRPOS(pipe) _MMIO_PIPE(pipe, _SPRA_POS, _SPRB_POS) |
| #define SPRSIZE(pipe) _MMIO_PIPE(pipe, _SPRA_SIZE, _SPRB_SIZE) |
| #define SPRKEYVAL(pipe) _MMIO_PIPE(pipe, _SPRA_KEYVAL, _SPRB_KEYVAL) |
| #define SPRKEYMSK(pipe) _MMIO_PIPE(pipe, _SPRA_KEYMSK, _SPRB_KEYMSK) |
| #define SPRSURF(pipe) _MMIO_PIPE(pipe, _SPRA_SURF, _SPRB_SURF) |
| #define SPRKEYMAX(pipe) _MMIO_PIPE(pipe, _SPRA_KEYMAX, _SPRB_KEYMAX) |
| #define SPRTILEOFF(pipe) _MMIO_PIPE(pipe, _SPRA_TILEOFF, _SPRB_TILEOFF) |
| #define SPROFFSET(pipe) _MMIO_PIPE(pipe, _SPRA_OFFSET, _SPRB_OFFSET) |
| #define SPRSCALE(pipe) _MMIO_PIPE(pipe, _SPRA_SCALE, _SPRB_SCALE) |
| #define SPRGAMC(pipe) _MMIO_PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC) |
| #define SPRSURFLIVE(pipe) _MMIO_PIPE(pipe, _SPRA_SURFLIVE, _SPRB_SURFLIVE) |
| |
| #define _SPACNTR (VLV_DISPLAY_BASE + 0x72180) |
| #define SP_ENABLE (1<<31) |
| #define SP_GAMMA_ENABLE (1<<30) |
| #define SP_PIXFORMAT_MASK (0xf<<26) |
| #define SP_FORMAT_YUV422 (0<<26) |
| #define SP_FORMAT_BGR565 (5<<26) |
| #define SP_FORMAT_BGRX8888 (6<<26) |
| #define SP_FORMAT_BGRA8888 (7<<26) |
| #define SP_FORMAT_RGBX1010102 (8<<26) |
| #define SP_FORMAT_RGBA1010102 (9<<26) |
| #define SP_FORMAT_RGBX8888 (0xe<<26) |
| #define SP_FORMAT_RGBA8888 (0xf<<26) |
| #define SP_ALPHA_PREMULTIPLY (1<<23) /* CHV pipe B */ |
| #define SP_SOURCE_KEY (1<<22) |
| #define SP_YUV_BYTE_ORDER_MASK (3<<16) |
| #define SP_YUV_ORDER_YUYV (0<<16) |
| #define SP_YUV_ORDER_UYVY (1<<16) |
| #define SP_YUV_ORDER_YVYU (2<<16) |
| #define SP_YUV_ORDER_VYUY (3<<16) |
| #define SP_ROTATE_180 (1<<15) |
| #define SP_TILED (1<<10) |
| #define SP_MIRROR (1<<8) /* CHV pipe B */ |
| #define _SPALINOFF (VLV_DISPLAY_BASE + 0x72184) |
| #define _SPASTRIDE (VLV_DISPLAY_BASE + 0x72188) |
| #define _SPAPOS (VLV_DISPLAY_BASE + 0x7218c) |
| #define _SPASIZE (VLV_DISPLAY_BASE + 0x72190) |
| #define _SPAKEYMINVAL (VLV_DISPLAY_BASE + 0x72194) |
| #define _SPAKEYMSK (VLV_DISPLAY_BASE + 0x72198) |
| #define _SPASURF (VLV_DISPLAY_BASE + 0x7219c) |
| #define _SPAKEYMAXVAL (VLV_DISPLAY_BASE + 0x721a0) |
| #define _SPATILEOFF (VLV_DISPLAY_BASE + 0x721a4) |
| #define _SPACONSTALPHA (VLV_DISPLAY_BASE + 0x721a8) |
| #define SP_CONST_ALPHA_ENABLE (1<<31) |
| #define _SPAGAMC (VLV_DISPLAY_BASE + 0x721f4) |
| |
| #define _SPBCNTR (VLV_DISPLAY_BASE + 0x72280) |
| #define _SPBLINOFF (VLV_DISPLAY_BASE + 0x72284) |
| #define _SPBSTRIDE (VLV_DISPLAY_BASE + 0x72288) |
| #define _SPBPOS (VLV_DISPLAY_BASE + 0x7228c) |
| #define _SPBSIZE (VLV_DISPLAY_BASE + 0x72290) |
| #define _SPBKEYMINVAL (VLV_DISPLAY_BASE + 0x72294) |
| #define _SPBKEYMSK (VLV_DISPLAY_BASE + 0x72298) |
| #define _SPBSURF (VLV_DISPLAY_BASE + 0x7229c) |
| #define _SPBKEYMAXVAL (VLV_DISPLAY_BASE + 0x722a0) |
| #define _SPBTILEOFF (VLV_DISPLAY_BASE + 0x722a4) |
| #define _SPBCONSTALPHA (VLV_DISPLAY_BASE + 0x722a8) |
| #define _SPBGAMC (VLV_DISPLAY_BASE + 0x722f4) |
| |
| #define SPCNTR(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPACNTR, _SPBCNTR) |
| #define SPLINOFF(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPALINOFF, _SPBLINOFF) |
| #define SPSTRIDE(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPASTRIDE, _SPBSTRIDE) |
| #define SPPOS(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPAPOS, _SPBPOS) |
| #define SPSIZE(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPASIZE, _SPBSIZE) |
| #define SPKEYMINVAL(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPAKEYMINVAL, _SPBKEYMINVAL) |
| #define SPKEYMSK(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPAKEYMSK, _SPBKEYMSK) |
| #define SPSURF(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPASURF, _SPBSURF) |
| #define SPKEYMAXVAL(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPAKEYMAXVAL, _SPBKEYMAXVAL) |
| #define SPTILEOFF(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPATILEOFF, _SPBTILEOFF) |
| #define SPCONSTALPHA(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPACONSTALPHA, _SPBCONSTALPHA) |
| #define SPGAMC(pipe, plane) _MMIO_PIPE((pipe) * 2 + (plane), _SPAGAMC, _SPBGAMC) |
| |
| /* |
| * CHV pipe B sprite CSC |
| * |
| * |cr| |c0 c1 c2| |cr + cr_ioff| |cr_ooff| |
| * |yg| = |c3 c4 c5| x |yg + yg_ioff| + |yg_ooff| |
| * |cb| |c6 c7 c8| |cb + cr_ioff| |cb_ooff| |
| */ |
| #define SPCSCYGOFF(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d900 + (sprite) * 0x1000) |
| #define SPCSCCBOFF(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d904 + (sprite) * 0x1000) |
| #define SPCSCCROFF(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d908 + (sprite) * 0x1000) |
| #define SPCSC_OOFF(x) (((x) & 0x7ff) << 16) /* s11 */ |
| #define SPCSC_IOFF(x) (((x) & 0x7ff) << 0) /* s11 */ |
| |
| #define SPCSCC01(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d90c + (sprite) * 0x1000) |
| #define SPCSCC23(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d910 + (sprite) * 0x1000) |
| #define SPCSCC45(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d914 + (sprite) * 0x1000) |
| #define SPCSCC67(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d918 + (sprite) * 0x1000) |
| #define SPCSCC8(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d91c + (sprite) * 0x1000) |
| #define SPCSC_C1(x) (((x) & 0x7fff) << 16) /* s3.12 */ |
| #define SPCSC_C0(x) (((x) & 0x7fff) << 0) /* s3.12 */ |
| |
| #define SPCSCYGICLAMP(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d920 + (sprite) * 0x1000) |
| #define SPCSCCBICLAMP(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d924 + (sprite) * 0x1000) |
| #define SPCSCCRICLAMP(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d928 + (sprite) * 0x1000) |
| #define SPCSC_IMAX(x) (((x) & 0x7ff) << 16) /* s11 */ |
| #define SPCSC_IMIN(x) (((x) & 0x7ff) << 0) /* s11 */ |
| |
| #define SPCSCYGOCLAMP(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d92c + (sprite) * 0x1000) |
| #define SPCSCCBOCLAMP(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d930 + (sprite) * 0x1000) |
| #define SPCSCCROCLAMP(sprite) _MMIO(VLV_DISPLAY_BASE + 0x6d934 + (sprite) * 0x1000) |
| #define SPCSC_OMAX(x) ((x) << 16) /* u10 */ |
| #define SPCSC_OMIN(x) ((x) << 0) /* u10 */ |
| |
| /* Skylake plane registers */ |
| |
| #define _PLANE_CTL_1_A 0x70180 |
| #define _PLANE_CTL_2_A 0x70280 |
| #define _PLANE_CTL_3_A 0x70380 |
| #define PLANE_CTL_ENABLE (1 << 31) |
| #define PLANE_CTL_PIPE_GAMMA_ENABLE (1 << 30) |
| #define PLANE_CTL_FORMAT_MASK (0xf << 24) |
| #define PLANE_CTL_FORMAT_YUV422 ( 0 << 24) |
| #define PLANE_CTL_FORMAT_NV12 ( 1 << 24) |
| #define PLANE_CTL_FORMAT_XRGB_2101010 ( 2 << 24) |
| #define PLANE_CTL_FORMAT_XRGB_8888 ( 4 << 24) |
| #define PLANE_CTL_FORMAT_XRGB_16161616F ( 6 << 24) |
| #define PLANE_CTL_FORMAT_AYUV ( 8 << 24) |
| #define PLANE_CTL_FORMAT_INDEXED ( 12 << 24) |
| #define PLANE_CTL_FORMAT_RGB_565 ( 14 << 24) |
| #define PLANE_CTL_PIPE_CSC_ENABLE (1 << 23) |
| #define PLANE_CTL_KEY_ENABLE_MASK (0x3 << 21) |
| #define PLANE_CTL_KEY_ENABLE_SOURCE ( 1 << 21) |
| #define PLANE_CTL_KEY_ENABLE_DESTINATION ( 2 << 21) |
| #define PLANE_CTL_ORDER_BGRX (0 << 20) |
| #define PLANE_CTL_ORDER_RGBX (1 << 20) |
| #define PLANE_CTL_YUV422_ORDER_MASK (0x3 << 16) |
| #define PLANE_CTL_YUV422_YUYV ( 0 << 16) |
| #define PLANE_CTL_YUV422_UYVY ( 1 << 16) |
| #define PLANE_CTL_YUV422_YVYU ( 2 << 16) |
| #define PLANE_CTL_YUV422_VYUY ( 3 << 16) |
| #define PLANE_CTL_DECOMPRESSION_ENABLE (1 << 15) |
| #define PLANE_CTL_TRICKLE_FEED_DISABLE (1 << 14) |
| #define PLANE_CTL_PLANE_GAMMA_DISABLE (1 << 13) |
| #define PLANE_CTL_TILED_MASK (0x7 << 10) |
| #define PLANE_CTL_TILED_LINEAR ( 0 << 10) |
| #define PLANE_CTL_TILED_X ( 1 << 10) |
| #define PLANE_CTL_TILED_Y ( 4 << 10) |
| #define PLANE_CTL_TILED_YF ( 5 << 10) |
| #define PLANE_CTL_ALPHA_MASK (0x3 << 4) |
| #define PLANE_CTL_ALPHA_DISABLE ( 0 << 4) |
| #define PLANE_CTL_ALPHA_SW_PREMULTIPLY ( 2 << 4) |
| #define PLANE_CTL_ALPHA_HW_PREMULTIPLY ( 3 << 4) |
| #define PLANE_CTL_ROTATE_MASK 0x3 |
| #define PLANE_CTL_ROTATE_0 0x0 |
| #define PLANE_CTL_ROTATE_90 0x1 |
| #define PLANE_CTL_ROTATE_180 0x2 |
| #define PLANE_CTL_ROTATE_270 0x3 |
| #define _PLANE_STRIDE_1_A 0x70188 |
| #define _PLANE_STRIDE_2_A 0x70288 |
| #define _PLANE_STRIDE_3_A 0x70388 |
| #define _PLANE_POS_1_A 0x7018c |
| #define _PLANE_POS_2_A 0x7028c |
| #define _PLANE_POS_3_A 0x7038c |
| #define _PLANE_SIZE_1_A 0x70190 |
| #define _PLANE_SIZE_2_A 0x70290 |
| #define _PLANE_SIZE_3_A 0x70390 |
| #define _PLANE_SURF_1_A 0x7019c |
| #define _PLANE_SURF_2_A 0x7029c |
| #define _PLANE_SURF_3_A 0x7039c |
| #define _PLANE_OFFSET_1_A 0x701a4 |
| #define _PLANE_OFFSET_2_A 0x702a4 |
| #define _PLANE_OFFSET_3_A 0x703a4 |
| #define _PLANE_KEYVAL_1_A 0x70194 |
| #define _PLANE_KEYVAL_2_A 0x70294 |
| #define _PLANE_KEYMSK_1_A 0x70198 |
| #define _PLANE_KEYMSK_2_A 0x70298 |
| #define _PLANE_KEYMAX_1_A 0x701a0 |
| #define _PLANE_KEYMAX_2_A 0x702a0 |
| #define _PLANE_BUF_CFG_1_A 0x7027c |
| #define _PLANE_BUF_CFG_2_A 0x7037c |
| #define _PLANE_NV12_BUF_CFG_1_A 0x70278 |
| #define _PLANE_NV12_BUF_CFG_2_A 0x70378 |
| |
| #define _PLANE_CTL_1_B 0x71180 |
| #define _PLANE_CTL_2_B 0x71280 |
| #define _PLANE_CTL_3_B 0x71380 |
| #define _PLANE_CTL_1(pipe) _PIPE(pipe, _PLANE_CTL_1_A, _PLANE_CTL_1_B) |
| #define _PLANE_CTL_2(pipe) _PIPE(pipe, _PLANE_CTL_2_A, _PLANE_CTL_2_B) |
| #define _PLANE_CTL_3(pipe) _PIPE(pipe, _PLANE_CTL_3_A, _PLANE_CTL_3_B) |
| #define PLANE_CTL(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_CTL_1(pipe), _PLANE_CTL_2(pipe)) |
| |
| #define _PLANE_STRIDE_1_B 0x71188 |
| #define _PLANE_STRIDE_2_B 0x71288 |
| #define _PLANE_STRIDE_3_B 0x71388 |
| #define _PLANE_STRIDE_1(pipe) \ |
| _PIPE(pipe, _PLANE_STRIDE_1_A, _PLANE_STRIDE_1_B) |
| #define _PLANE_STRIDE_2(pipe) \ |
| _PIPE(pipe, _PLANE_STRIDE_2_A, _PLANE_STRIDE_2_B) |
| #define _PLANE_STRIDE_3(pipe) \ |
| _PIPE(pipe, _PLANE_STRIDE_3_A, _PLANE_STRIDE_3_B) |
| #define PLANE_STRIDE(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_STRIDE_1(pipe), _PLANE_STRIDE_2(pipe)) |
| |
| #define _PLANE_POS_1_B 0x7118c |
| #define _PLANE_POS_2_B 0x7128c |
| #define _PLANE_POS_3_B 0x7138c |
| #define _PLANE_POS_1(pipe) _PIPE(pipe, _PLANE_POS_1_A, _PLANE_POS_1_B) |
| #define _PLANE_POS_2(pipe) _PIPE(pipe, _PLANE_POS_2_A, _PLANE_POS_2_B) |
| #define _PLANE_POS_3(pipe) _PIPE(pipe, _PLANE_POS_3_A, _PLANE_POS_3_B) |
| #define PLANE_POS(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_POS_1(pipe), _PLANE_POS_2(pipe)) |
| |
| #define _PLANE_SIZE_1_B 0x71190 |
| #define _PLANE_SIZE_2_B 0x71290 |
| #define _PLANE_SIZE_3_B 0x71390 |
| #define _PLANE_SIZE_1(pipe) _PIPE(pipe, _PLANE_SIZE_1_A, _PLANE_SIZE_1_B) |
| #define _PLANE_SIZE_2(pipe) _PIPE(pipe, _PLANE_SIZE_2_A, _PLANE_SIZE_2_B) |
| #define _PLANE_SIZE_3(pipe) _PIPE(pipe, _PLANE_SIZE_3_A, _PLANE_SIZE_3_B) |
| #define PLANE_SIZE(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_SIZE_1(pipe), _PLANE_SIZE_2(pipe)) |
| |
| #define _PLANE_SURF_1_B 0x7119c |
| #define _PLANE_SURF_2_B 0x7129c |
| #define _PLANE_SURF_3_B 0x7139c |
| #define _PLANE_SURF_1(pipe) _PIPE(pipe, _PLANE_SURF_1_A, _PLANE_SURF_1_B) |
| #define _PLANE_SURF_2(pipe) _PIPE(pipe, _PLANE_SURF_2_A, _PLANE_SURF_2_B) |
| #define _PLANE_SURF_3(pipe) _PIPE(pipe, _PLANE_SURF_3_A, _PLANE_SURF_3_B) |
| #define PLANE_SURF(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_SURF_1(pipe), _PLANE_SURF_2(pipe)) |
| |
| #define _PLANE_OFFSET_1_B 0x711a4 |
| #define _PLANE_OFFSET_2_B 0x712a4 |
| #define _PLANE_OFFSET_1(pipe) _PIPE(pipe, _PLANE_OFFSET_1_A, _PLANE_OFFSET_1_B) |
| #define _PLANE_OFFSET_2(pipe) _PIPE(pipe, _PLANE_OFFSET_2_A, _PLANE_OFFSET_2_B) |
| #define PLANE_OFFSET(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_OFFSET_1(pipe), _PLANE_OFFSET_2(pipe)) |
| |
| #define _PLANE_KEYVAL_1_B 0x71194 |
| #define _PLANE_KEYVAL_2_B 0x71294 |
| #define _PLANE_KEYVAL_1(pipe) _PIPE(pipe, _PLANE_KEYVAL_1_A, _PLANE_KEYVAL_1_B) |
| #define _PLANE_KEYVAL_2(pipe) _PIPE(pipe, _PLANE_KEYVAL_2_A, _PLANE_KEYVAL_2_B) |
| #define PLANE_KEYVAL(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_KEYVAL_1(pipe), _PLANE_KEYVAL_2(pipe)) |
| |
| #define _PLANE_KEYMSK_1_B 0x71198 |
| #define _PLANE_KEYMSK_2_B 0x71298 |
| #define _PLANE_KEYMSK_1(pipe) _PIPE(pipe, _PLANE_KEYMSK_1_A, _PLANE_KEYMSK_1_B) |
| #define _PLANE_KEYMSK_2(pipe) _PIPE(pipe, _PLANE_KEYMSK_2_A, _PLANE_KEYMSK_2_B) |
| #define PLANE_KEYMSK(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_KEYMSK_1(pipe), _PLANE_KEYMSK_2(pipe)) |
| |
| #define _PLANE_KEYMAX_1_B 0x711a0 |
| #define _PLANE_KEYMAX_2_B 0x712a0 |
| #define _PLANE_KEYMAX_1(pipe) _PIPE(pipe, _PLANE_KEYMAX_1_A, _PLANE_KEYMAX_1_B) |
| #define _PLANE_KEYMAX_2(pipe) _PIPE(pipe, _PLANE_KEYMAX_2_A, _PLANE_KEYMAX_2_B) |
| #define PLANE_KEYMAX(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_KEYMAX_1(pipe), _PLANE_KEYMAX_2(pipe)) |
| |
| #define _PLANE_BUF_CFG_1_B 0x7127c |
| #define _PLANE_BUF_CFG_2_B 0x7137c |
| #define _PLANE_BUF_CFG_1(pipe) \ |
| _PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B) |
| #define _PLANE_BUF_CFG_2(pipe) \ |
| _PIPE(pipe, _PLANE_BUF_CFG_2_A, _PLANE_BUF_CFG_2_B) |
| #define PLANE_BUF_CFG(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_BUF_CFG_1(pipe), _PLANE_BUF_CFG_2(pipe)) |
| |
| #define _PLANE_NV12_BUF_CFG_1_B 0x71278 |
| #define _PLANE_NV12_BUF_CFG_2_B 0x71378 |
| #define _PLANE_NV12_BUF_CFG_1(pipe) \ |
| _PIPE(pipe, _PLANE_NV12_BUF_CFG_1_A, _PLANE_NV12_BUF_CFG_1_B) |
| #define _PLANE_NV12_BUF_CFG_2(pipe) \ |
| _PIPE(pipe, _PLANE_NV12_BUF_CFG_2_A, _PLANE_NV12_BUF_CFG_2_B) |
| #define PLANE_NV12_BUF_CFG(pipe, plane) \ |
| _MMIO_PLANE(plane, _PLANE_NV12_BUF_CFG_1(pipe), _PLANE_NV12_BUF_CFG_2(pipe)) |
| |
| /* SKL new cursor registers */ |
| #define _CUR_BUF_CFG_A 0x7017c |
| #define _CUR_BUF_CFG_B 0x7117c |
| #define CUR_BUF_CFG(pipe) _MMIO_PIPE(pipe, _CUR_BUF_CFG_A, _CUR_BUF_CFG_B) |
| |
| /* VBIOS regs */ |
| #define VGACNTRL _MMIO(0x71400) |
| # define VGA_DISP_DISABLE (1 << 31) |
| # define VGA_2X_MODE (1 << 30) |
| # define VGA_PIPE_B_SELECT (1 << 29) |
| |
| #define VLV_VGACNTRL _MMIO(VLV_DISPLAY_BASE + 0x71400) |
| |
| /* Ironlake */ |
| |
| #define CPU_VGACNTRL _MMIO(0x41000) |
| |
| #define DIGITAL_PORT_HOTPLUG_CNTRL _MMIO(0x44030) |
| #define DIGITAL_PORTA_HOTPLUG_ENABLE (1 << 4) |
| #define DIGITAL_PORTA_PULSE_DURATION_2ms (0 << 2) /* pre-HSW */ |
| #define DIGITAL_PORTA_PULSE_DURATION_4_5ms (1 << 2) /* pre-HSW */ |
| #define DIGITAL_PORTA_PULSE_DURATION_6ms (2 << 2) /* pre-HSW */ |
| #define DIGITAL_PORTA_PULSE_DURATION_100ms (3 << 2) /* pre-HSW */ |
| #define DIGITAL_PORTA_PULSE_DURATION_MASK (3 << 2) /* pre-HSW */ |
| #define DIGITAL_PORTA_HOTPLUG_STATUS_MASK (3 << 0) |
| #define DIGITAL_PORTA_HOTPLUG_NO_DETECT (0 << 0) |
| #define DIGITAL_PORTA_HOTPLUG_SHORT_DETECT (1 << 0) |
| #define DIGITAL_PORTA_HOTPLUG_LONG_DETECT (2 << 0) |
| |
| /* refresh rate hardware control */ |
| #define RR_HW_CTL _MMIO(0x45300) |
| #define RR_HW_LOW_POWER_FRAMES_MASK 0xff |
| #define RR_HW_HIGH_POWER_FRAMES_MASK 0xff00 |
| |
| #define FDI_PLL_BIOS_0 _MMIO(0x46000) |
| #define FDI_PLL_FB_CLOCK_MASK 0xff |
| #define FDI_PLL_BIOS_1 _MMIO(0x46004) |
| #define FDI_PLL_BIOS_2 _MMIO(0x46008) |
| #define DISPLAY_PORT_PLL_BIOS_0 _MMIO(0x4600c) |
| #define DISPLAY_PORT_PLL_BIOS_1 _MMIO(0x46010) |
| #define DISPLAY_PORT_PLL_BIOS_2 _MMIO(0x46014) |
| |
| #define PCH_3DCGDIS0 _MMIO(0x46020) |
| # define MARIUNIT_CLOCK_GATE_DISABLE (1 << 18) |
| # define SVSMUNIT_CLOCK_GATE_DISABLE (1 << 1) |
| |
| #define PCH_3DCGDIS1 _MMIO(0x46024) |
| # define VFMUNIT_CLOCK_GATE_DISABLE (1 << 11) |
| |
| #define FDI_PLL_FREQ_CTL _MMIO(0x46030) |
| #define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24) |
| #define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00 |
| #define FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK 0xff |
| |
| |
| #define _PIPEA_DATA_M1 0x60030 |
| #define PIPE_DATA_M1_OFFSET 0 |
| #define _PIPEA_DATA_N1 0x60034 |
| #define PIPE_DATA_N1_OFFSET 0 |
| |
| #define _PIPEA_DATA_M2 0x60038 |
| #define PIPE_DATA_M2_OFFSET 0 |
| #define _PIPEA_DATA_N2 0x6003c |
| #define PIPE_DATA_N2_OFFSET 0 |
| |
| #define _PIPEA_LINK_M1 0x60040 |
| #define PIPE_LINK_M1_OFFSET 0 |
| #define _PIPEA_LINK_N1 0x60044 |
| #define PIPE_LINK_N1_OFFSET 0 |
| |
| #define _PIPEA_LINK_M2 0x60048 |
| #define PIPE_LINK_M2_OFFSET 0 |
| #define _PIPEA_LINK_N2 0x6004c |
| #define PIPE_LINK_N2_OFFSET 0 |
| |
| /* PIPEB timing regs are same start from 0x61000 */ |
| |
| #define _PIPEB_DATA_M1 0x61030 |
| #define _PIPEB_DATA_N1 0x61034 |
| #define _PIPEB_DATA_M2 0x61038 |
| #define _PIPEB_DATA_N2 0x6103c |
| #define _PIPEB_LINK_M1 0x61040 |
| #define _PIPEB_LINK_N1 0x61044 |
| #define _PIPEB_LINK_M2 0x61048 |
| #define _PIPEB_LINK_N2 0x6104c |
| |
| #define PIPE_DATA_M1(tran) _MMIO_TRANS2(tran, _PIPEA_DATA_M1) |
| #define PIPE_DATA_N1(tran) _MMIO_TRANS2(tran, _PIPEA_DATA_N1) |
| #define PIPE_DATA_M2(tran) _MMIO_TRANS2(tran, _PIPEA_DATA_M2) |
| #define PIPE_DATA_N2(tran) _MMIO_TRANS2(tran, _PIPEA_DATA_N2) |
| #define PIPE_LINK_M1(tran) _MMIO_TRANS2(tran, _PIPEA_LINK_M1) |
| #define PIPE_LINK_N1(tran) _MMIO_TRANS2(tran, _PIPEA_LINK_N1) |
| #define PIPE_LINK_M2(tran) _MMIO_TRANS2(tran, _PIPEA_LINK_M2) |
| #define PIPE_LINK_N2(tran) _MMIO_TRANS2(tran, _PIPEA_LINK_N2) |
| |
| /* CPU panel fitter */ |
| /* IVB+ has 3 fitters, 0 is 7x5 capable, the other two only 3x3 */ |
| #define _PFA_CTL_1 0x68080 |
| #define _PFB_CTL_1 0x68880 |
| #define PF_ENABLE (1<<31) |
| #define PF_PIPE_SEL_MASK_IVB (3<<29) |
| #define PF_PIPE_SEL_IVB(pipe) ((pipe)<<29) |
| #define PF_FILTER_MASK (3<<23) |
| #define PF_FILTER_PROGRAMMED (0<<23) |
| #define PF_FILTER_MED_3x3 (1<<23) |
| #define PF_FILTER_EDGE_ENHANCE (2<<23) |
| #define PF_FILTER_EDGE_SOFTEN (3<<23) |
| #define _PFA_WIN_SZ 0x68074 |
| #define _PFB_WIN_SZ 0x68874 |
| #define _PFA_WIN_POS 0x68070 |
| #define _PFB_WIN_POS 0x68870 |
| #define _PFA_VSCALE 0x68084 |
| #define _PFB_VSCALE 0x68884 |
| #define _PFA_HSCALE 0x68090 |
| #define _PFB_HSCALE 0x68890 |
| |
| #define PF_CTL(pipe) _MMIO_PIPE(pipe, _PFA_CTL_1, _PFB_CTL_1) |
| #define PF_WIN_SZ(pipe) _MMIO_PIPE(pipe, _PFA_WIN_SZ, _PFB_WIN_SZ) |
| #define PF_WIN_POS(pipe) _MMIO_PIPE(pipe, _PFA_WIN_POS, _PFB_WIN_POS) |
| #define PF_VSCALE(pipe) _MMIO_PIPE(pipe, _PFA_VSCALE, _PFB_VSCALE) |
| #define PF_HSCALE(pipe) _MMIO_PIPE(pipe, _PFA_HSCALE, _PFB_HSCALE) |
| |
| #define _PSA_CTL 0x68180 |
| #define _PSB_CTL 0x68980 |
| #define PS_ENABLE (1<<31) |
| #define _PSA_WIN_SZ 0x68174 |
| #define _PSB_WIN_SZ 0x68974 |
| #define _PSA_WIN_POS 0x68170 |
| #define _PSB_WIN_POS 0x68970 |
| |
| #define PS_CTL(pipe) _MMIO_PIPE(pipe, _PSA_CTL, _PSB_CTL) |
| #define PS_WIN_SZ(pipe) _MMIO_PIPE(pipe, _PSA_WIN_SZ, _PSB_WIN_SZ) |
| #define PS_WIN_POS(pipe) _MMIO_PIPE(pipe, _PSA_WIN_POS, _PSB_WIN_POS) |
| |
| /* |
| * Skylake scalers |
| */ |
| #define _PS_1A_CTRL 0x68180 |
| #define _PS_2A_CTRL 0x68280 |
| #define _PS_1B_CTRL 0x68980 |
| #define _PS_2B_CTRL 0x68A80 |
| #define _PS_1C_CTRL 0x69180 |
| #define PS_SCALER_EN (1 << 31) |
| #define PS_SCALER_MODE_MASK (3 << 28) |
| #define PS_SCALER_MODE_DYN (0 << 28) |
| #define PS_SCALER_MODE_HQ (1 << 28) |
| #define PS_PLANE_SEL_MASK (7 << 25) |
| #define PS_PLANE_SEL(plane) (((plane) + 1) << 25) |
| #define PS_FILTER_MASK (3 << 23) |
| #define PS_FILTER_MEDIUM (0 << 23) |
| #define PS_FILTER_EDGE_ENHANCE (2 << 23) |
| #define PS_FILTER_BILINEAR (3 << 23) |
| #define PS_VERT3TAP (1 << 21) |
| #define PS_VERT_INT_INVERT_FIELD1 (0 << 20) |
| #define PS_VERT_INT_INVERT_FIELD0 (1 << 20) |
| #define PS_PWRUP_PROGRESS (1 << 17) |
| #define PS_V_FILTER_BYPASS (1 << 8) |
| #define PS_VADAPT_EN (1 << 7) |
| #define PS_VADAPT_MODE_MASK (3 << 5) |
| #define PS_VADAPT_MODE_LEAST_ADAPT (0 << 5) |
| #define PS_VADAPT_MODE_MOD_ADAPT (1 << 5) |
| #define PS_VADAPT_MODE_MOST_ADAPT (3 << 5) |
| |
| #define _PS_PWR_GATE_1A 0x68160 |
| #define _PS_PWR_GATE_2A 0x68260 |
| #define _PS_PWR_GATE_1B 0x68960 |
| #define _PS_PWR_GATE_2B 0x68A60 |
| #define _PS_PWR_GATE_1C 0x69160 |
| #define PS_PWR_GATE_DIS_OVERRIDE (1 << 31) |
| #define PS_PWR_GATE_SETTLING_TIME_32 (0 << 3) |
| #define PS_PWR_GATE_SETTLING_TIME_64 (1 << 3) |
| #define PS_PWR_GATE_SETTLING_TIME_96 (2 << 3) |
| #define PS_PWR_GATE_SETTLING_TIME_128 (3 << 3) |
| #define PS_PWR_GATE_SLPEN_8 0 |
| #define PS_PWR_GATE_SLPEN_16 1 |
| #define PS_PWR_GATE_SLPEN_24 2 |
| #define PS_PWR_GATE_SLPEN_32 3 |
| |
| #define _PS_WIN_POS_1A 0x68170 |
| #define _PS_WIN_POS_2A 0x68270 |
| #define _PS_WIN_POS_1B 0x68970 |
| #define _PS_WIN_POS_2B 0x68A70 |
| #define _PS_WIN_POS_1C 0x69170 |
| |
| #define _PS_WIN_SZ_1A 0x68174 |
| #define _PS_WIN_SZ_2A 0x68274 |
| #define _PS_WIN_SZ_1B 0x68974 |
| #define _PS_WIN_SZ_2B 0x68A74 |
| #define _PS_WIN_SZ_1C 0x69174 |
| |
| #define _PS_VSCALE_1A 0x68184 |
| #define _PS_VSCALE_2A 0x68284 |
| #define _PS_VSCALE_1B 0x68984 |
| #define _PS_VSCALE_2B 0x68A84 |
| #define _PS_VSCALE_1C 0x69184 |
| |
| #define _PS_HSCALE_1A 0x68190 |
| #define _PS_HSCALE_2A 0x68290 |
| #define _PS_HSCALE_1B 0x68990 |
| #define _PS_HSCALE_2B 0x68A90 |
| #define _PS_HSCALE_1C 0x69190 |
| |
| #define _PS_VPHASE_1A 0x68188 |
| #define _PS_VPHASE_2A 0x68288 |
| #define _PS_VPHASE_1B 0x68988 |
| #define _PS_VPHASE_2B 0x68A88 |
| #define _PS_VPHASE_1C 0x69188 |
| |
| #define _PS_HPHASE_1A 0x68194 |
| #define _PS_HPHASE_2A 0x68294 |
| #define _PS_HPHASE_1B 0x68994 |
| #define _PS_HPHASE_2B 0x68A94 |
| #define _PS_HPHASE_1C 0x69194 |
| |
| #define _PS_ECC_STAT_1A 0x681D0 |
| #define _PS_ECC_STAT_2A 0x682D0 |
| #define _PS_ECC_STAT_1B 0x689D0 |
| #define _PS_ECC_STAT_2B 0x68AD0 |
| #define _PS_ECC_STAT_1C 0x691D0 |
| |
| #define _ID(id, a, b) ((a) + (id)*((b)-(a))) |
| #define SKL_PS_CTRL(pipe, id) _MMIO_PIPE(pipe, \ |
| _ID(id, _PS_1A_CTRL, _PS_2A_CTRL), \ |
| _ID(id, _PS_1B_CTRL, _PS_2B_CTRL)) |
| #define SKL_PS_PWR_GATE(pipe, id) _MMIO_PIPE(pipe, \ |
| _ID(id, _PS_PWR_GATE_1A, _PS_PWR_GATE_2A), \ |
| _ID(id, _PS_PWR_GATE_1B, _PS_PWR_GATE_2B)) |
| #define SKL_PS_WIN_POS(pipe, id) _MMIO_PIPE(pipe, \ |
| _ID(id, _PS_WIN_POS_1A, _PS_WIN_POS_2A), \ |
| _ID(id, _PS_WIN_POS_1B, _PS_WIN_POS_2B)) |
| #define SKL_PS_WIN_SZ(pipe, id) _MMIO_PIPE(pipe, \ |
| _ID(id, _PS_WIN_SZ_1A, _PS_WIN_SZ_2A), \ |
| _ID(id, _PS_WIN_SZ_1B, _PS_WIN_SZ_2B)) |
| #define SKL_PS_VSCALE(pipe, id) _MMIO_PIPE(pipe, \ |
| _ID(id, _PS_VSCALE_1A, _PS_VSCALE_2A), \ |
| _ID(id, _PS_VSCALE_1B, _PS_VSCALE_2B)) |
| #define SKL_PS_HSCALE(pipe, id) _MMIO_PIPE(pipe, \ |
| _ID(id, _PS_HSCALE_1A, _PS_HSCALE_2A), \ |
| _ID(id, _PS_HSCALE_1B, _PS_HSCALE_2B)) |
| #define SKL_PS_VPHASE(pipe, id) _MMIO_PIPE(pipe, \ |
| _ID(id, _PS_VPHASE_1A, _PS_VPHASE_2A), \ |
| _ID(id, _PS_VPHASE_1B, _PS_VPHASE_2B)) |
| #define SKL_PS_HPHASE(pipe, id) _MMIO_PIPE(pipe, \ |
| _ID(id, _PS_HPHASE_1A, _PS_HPHASE_2A), \ |
| _ID(id, _PS_HPHASE_1B, _PS_HPHASE_2B)) |
| #define SKL_PS_ECC_STAT(pipe, id) _MMIO_PIPE(pipe, \ |
| _ID(id, _PS_ECC_STAT_1A, _PS_ECC_STAT_2A), \ |
| _ID(id, _PS_ECC_STAT_1B, _PS_ECC_STAT_2B)) |
| |
| /* legacy palette */ |
| #define _LGC_PALETTE_A 0x4a000 |
| #define _LGC_PALETTE_B 0x4a800 |
| #define LGC_PALETTE(pipe, i) _MMIO(_PIPE(pipe, _LGC_PALETTE_A, _LGC_PALETTE_B) + (i) * 4) |
| |
| #define _GAMMA_MODE_A 0x4a480 |
| #define _GAMMA_MODE_B 0x4ac80 |
| #define GAMMA_MODE(pipe) _MMIO_PIPE(pipe, _GAMMA_MODE_A, _GAMMA_MODE_B) |
| #define GAMMA_MODE_MODE_MASK (3 << 0) |
| #define GAMMA_MODE_MODE_8BIT (0 << 0) |
| #define GAMMA_MODE_MODE_10BIT (1 << 0) |
| #define GAMMA_MODE_MODE_12BIT (2 << 0) |
| #define GAMMA_MODE_MODE_SPLIT (3 << 0) |
| |
| /* DMC/CSR */ |
| #define CSR_PROGRAM(i) _MMIO(0x80000 + (i) * 4) |
| #define CSR_SSP_BASE_ADDR_GEN9 0x00002FC0 |
| #define CSR_HTP_ADDR_SKL 0x00500034 |
| #define CSR_SSP_BASE _MMIO(0x8F074) |
| #define CSR_HTP_SKL _MMIO(0x8F004) |
| #define CSR_LAST_WRITE _MMIO(0x8F034) |
| #define CSR_LAST_WRITE_VALUE 0xc003b400 |
| /* MMIO address range for CSR program (0x80000 - 0x82FFF) */ |
| #define CSR_MMIO_START_RANGE 0x80000 |
| #define CSR_MMIO_END_RANGE 0x8FFFF |
| #define SKL_CSR_DC3_DC5_COUNT _MMIO(0x80030) |
| #define SKL_CSR_DC5_DC6_COUNT _MMIO(0x8002C) |
| #define BXT_CSR_DC3_DC5_COUNT _MMIO(0x80038) |
| |
| /* interrupts */ |
| #define DE_MASTER_IRQ_CONTROL (1 << 31) |
| #define DE_SPRITEB_FLIP_DONE (1 << 29) |
| #define DE_SPRITEA_FLIP_DONE (1 << 28) |
| #define DE_PLANEB_FLIP_DONE (1 << 27) |
| #define DE_PLANEA_FLIP_DONE (1 << 26) |
| #define DE_PLANE_FLIP_DONE(plane) (1 << (26 + (plane))) |
| #define DE_PCU_EVENT (1 << 25) |
| #define DE_GTT_FAULT (1 << 24) |
| #define DE_POISON (1 << 23) |
| #define DE_PERFORM_COUNTER (1 << 22) |
| #define DE_PCH_EVENT (1 << 21) |
| #define DE_AUX_CHANNEL_A (1 << 20) |
| #define DE_DP_A_HOTPLUG (1 << 19) |
| #define DE_GSE (1 << 18) |
| #define DE_PIPEB_VBLANK (1 << 15) |
| #define DE_PIPEB_EVEN_FIELD (1 << 14) |
| #define DE_PIPEB_ODD_FIELD (1 << 13) |
| #define DE_PIPEB_LINE_COMPARE (1 << 12) |
| #define DE_PIPEB_VSYNC (1 << 11) |
| #define DE_PIPEB_CRC_DONE (1 << 10) |
| #define DE_PIPEB_FIFO_UNDERRUN (1 << 8) |
| #define DE_PIPEA_VBLANK (1 << 7) |
| #define DE_PIPE_VBLANK(pipe) (1 << (7 + 8*(pipe))) |
| #define DE_PIPEA_EVEN_FIELD (1 << 6) |
| #define DE_PIPEA_ODD_FIELD (1 << 5) |
| #define DE_PIPEA_LINE_COMPARE (1 << 4) |
| #define DE_PIPEA_VSYNC (1 << 3) |
| #define DE_PIPEA_CRC_DONE (1 << 2) |
| #define DE_PIPE_CRC_DONE(pipe) (1 << (2 + 8*(pipe))) |
| #define DE_PIPEA_FIFO_UNDERRUN (1 << 0) |
| #define DE_PIPE_FIFO_UNDERRUN(pipe) (1 << (8*(pipe))) |
| |
| /* More Ivybridge lolz */ |
| #define DE_ERR_INT_IVB (1<<30) |
| #define DE_GSE_IVB (1<<29) |
| #define DE_PCH_EVENT_IVB (1<<28) |
| #define DE_DP_A_HOTPLUG_IVB (1<<27) |
| #define DE_AUX_CHANNEL_A_IVB (1<<26) |
| #define DE_SPRITEC_FLIP_DONE_IVB (1<<14) |
| #define DE_PLANEC_FLIP_DONE_IVB (1<<13) |
| #define DE_PIPEC_VBLANK_IVB (1<<10) |
| #define DE_SPRITEB_FLIP_DONE_IVB (1<<9) |
| #define DE_PLANEB_FLIP_DONE_IVB (1<<8) |
| #define DE_PIPEB_VBLANK_IVB (1<<5) |
| #define DE_SPRITEA_FLIP_DONE_IVB (1<<4) |
| #define DE_PLANEA_FLIP_DONE_IVB (1<<3) |
| #define DE_PLANE_FLIP_DONE_IVB(plane) (1<< (3 + 5*(plane))) |
| #define DE_PIPEA_VBLANK_IVB (1<<0) |
| #define DE_PIPE_VBLANK_IVB(pipe) (1 << ((pipe) * 5)) |
| |
| #define VLV_MASTER_IER _MMIO(0x4400c) /* Gunit master IER */ |
| #define MASTER_INTERRUPT_ENABLE (1<<31) |
| |
| #define DEISR _MMIO(0x44000) |
| #define DEIMR _MMIO(0x44004) |
| #define DEIIR _MMIO(0x44008) |
| #define DEIER _MMIO(0x4400c) |
| |
| #define GTISR _MMIO(0x44010) |
| #define GTIMR _MMIO(0x44014) |
| #define GTIIR _MMIO(0x44018) |
| #define GTIER _MMIO(0x4401c) |
| |
| #define GEN8_MASTER_IRQ _MMIO(0x44200) |
| #define GEN8_MASTER_IRQ_CONTROL (1<<31) |
| #define GEN8_PCU_IRQ (1<<30) |
| #define GEN8_DE_PCH_IRQ (1<<23) |
| #define GEN8_DE_MISC_IRQ (1<<22) |
| #define GEN8_DE_PORT_IRQ (1<<20) |
| #define GEN8_DE_PIPE_C_IRQ (1<<18) |
| #define GEN8_DE_PIPE_B_IRQ (1<<17) |
| #define GEN8_DE_PIPE_A_IRQ (1<<16) |
| #define GEN8_DE_PIPE_IRQ(pipe) (1<<(16+(pipe))) |
| #define GEN8_GT_VECS_IRQ (1<<6) |
| #define GEN8_GT_PM_IRQ (1<<4) |
| #define GEN8_GT_VCS2_IRQ (1<<3) |
| #define GEN8_GT_VCS1_IRQ (1<<2) |
| #define GEN8_GT_BCS_IRQ (1<<1) |
| #define GEN8_GT_RCS_IRQ (1<<0) |
| |
| #define GEN8_GT_ISR(which) _MMIO(0x44300 + (0x10 * (which))) |
| #define GEN8_GT_IMR(which) _MMIO(0x44304 + (0x10 * (which))) |
| #define GEN8_GT_IIR(which) _MMIO(0x44308 + (0x10 * (which))) |
| #define GEN8_GT_IER(which) _MMIO(0x4430c + (0x10 * (which))) |
| |
| #define GEN8_RCS_IRQ_SHIFT 0 |
| #define GEN8_BCS_IRQ_SHIFT 16 |
| #define GEN8_VCS1_IRQ_SHIFT 0 |
| #define GEN8_VCS2_IRQ_SHIFT 16 |
| #define GEN8_VECS_IRQ_SHIFT 0 |
| #define GEN8_WD_IRQ_SHIFT 16 |
| |
| #define GEN8_DE_PIPE_ISR(pipe) _MMIO(0x44400 + (0x10 * (pipe))) |
| #define GEN8_DE_PIPE_IMR(pipe) _MMIO(0x44404 + (0x10 * (pipe))) |
| #define GEN8_DE_PIPE_IIR(pipe) _MMIO(0x44408 + (0x10 * (pipe))) |
| #define GEN8_DE_PIPE_IER(pipe) _MMIO(0x4440c + (0x10 * (pipe))) |
| #define GEN8_PIPE_FIFO_UNDERRUN (1 << 31) |
| #define GEN8_PIPE_CDCLK_CRC_ERROR (1 << 29) |
| #define GEN8_PIPE_CDCLK_CRC_DONE (1 << 28) |
| #define GEN8_PIPE_CURSOR_FAULT (1 << 10) |
| #define GEN8_PIPE_SPRITE_FAULT (1 << 9) |
| #define GEN8_PIPE_PRIMARY_FAULT (1 << 8) |
| #define GEN8_PIPE_SPRITE_FLIP_DONE (1 << 5) |
| #define GEN8_PIPE_PRIMARY_FLIP_DONE (1 << 4) |
| #define GEN8_PIPE_SCAN_LINE_EVENT (1 << 2) |
| #define GEN8_PIPE_VSYNC (1 << 1) |
| #define GEN8_PIPE_VBLANK (1 << 0) |
| #define GEN9_PIPE_CURSOR_FAULT (1 << 11) |
| #define GEN9_PIPE_PLANE4_FAULT (1 << 10) |
| #define GEN9_PIPE_PLANE3_FAULT (1 << 9) |
| #define GEN9_PIPE_PLANE2_FAULT (1 << 8) |
| #define GEN9_PIPE_PLANE1_FAULT (1 << 7) |
| #define GEN9_PIPE_PLANE4_FLIP_DONE (1 << 6) |
| #define GEN9_PIPE_PLANE3_FLIP_DONE (1 << 5) |
| #define GEN9_PIPE_PLANE2_FLIP_DONE (1 << 4) |
| #define GEN9_PIPE_PLANE1_FLIP_DONE (1 << 3) |
| #define GEN9_PIPE_PLANE_FLIP_DONE(p) (1 << (3 + (p))) |
| #define GEN8_DE_PIPE_IRQ_FAULT_ERRORS \ |
| (GEN8_PIPE_CURSOR_FAULT | \ |
| GEN8_PIPE_SPRITE_FAULT | \ |
| GEN8_PIPE_PRIMARY_FAULT) |
| #define GEN9_DE_PIPE_IRQ_FAULT_ERRORS \ |
| (GEN9_PIPE_CURSOR_FAULT | \ |
| GEN9_PIPE_PLANE4_FAULT | \ |
| GEN9_PIPE_PLANE3_FAULT | \ |
| GEN9_PIPE_PLANE2_FAULT | \ |
| GEN9_PIPE_PLANE1_FAULT) |
| |
| #define GEN8_DE_PORT_ISR _MMIO(0x44440) |
| #define GEN8_DE_PORT_IMR _MMIO(0x44444) |
| #define GEN8_DE_PORT_IIR _MMIO(0x44448) |
| #define GEN8_DE_PORT_IER _MMIO(0x4444c) |
| #define GEN9_AUX_CHANNEL_D (1 << 27) |
| #define GEN9_AUX_CHANNEL_C (1 << 26) |
| #define GEN9_AUX_CHANNEL_B (1 << 25) |
| #define BXT_DE_PORT_HP_DDIC (1 << 5) |
| #define BXT_DE_PORT_HP_DDIB (1 << 4) |
| #define BXT_DE_PORT_HP_DDIA (1 << 3) |
| #define BXT_DE_PORT_HOTPLUG_MASK (BXT_DE_PORT_HP_DDIA | \ |
| BXT_DE_PORT_HP_DDIB | \ |
| BXT_DE_PORT_HP_DDIC) |
| #define GEN8_PORT_DP_A_HOTPLUG (1 << 3) |
| #define BXT_DE_PORT_GMBUS (1 << 1) |
| #define GEN8_AUX_CHANNEL_A (1 << 0) |
| |
| #define GEN8_DE_MISC_ISR _MMIO(0x44460) |
| #define GEN8_DE_MISC_IMR _MMIO(0x44464) |
| #define GEN8_DE_MISC_IIR _MMIO(0x44468) |
| #define GEN8_DE_MISC_IER _MMIO(0x4446c) |
| #define GEN8_DE_MISC_GSE (1 << 27) |
| |
| #define GEN8_PCU_ISR _MMIO(0x444e0) |
| #define GEN8_PCU_IMR _MMIO(0x444e4) |
| #define GEN8_PCU_IIR _MMIO(0x444e8) |
| #define GEN8_PCU_IER _MMIO(0x444ec) |
| |
| #define ILK_DISPLAY_CHICKEN2 _MMIO(0x42004) |
| /* Required on all Ironlake and Sandybridge according to the B-Spec. */ |
| #define ILK_ELPIN_409_SELECT (1 << 25) |
| #define ILK_DPARB_GATE (1<<22) |
| #define ILK_VSDPFD_FULL (1<<21) |
| #define FUSE_STRAP _MMIO(0x42014) |
| #define ILK_INTERNAL_GRAPHICS_DISABLE (1 << 31) |
| #define ILK_INTERNAL_DISPLAY_DISABLE (1 << 30) |
| #define ILK_DISPLAY_DEBUG_DISABLE (1 << 29) |
| #define IVB_PIPE_C_DISABLE (1 << 28) |
| #define ILK_HDCP_DISABLE (1 << 25) |
| #define ILK_eDP_A_DISABLE (1 << 24) |
| #define HSW_CDCLK_LIMIT (1 << 24) |
| #define ILK_DESKTOP (1 << 23) |
| |
| #define ILK_DSPCLK_GATE_D _MMIO(0x42020) |
| #define ILK_VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) |
| #define ILK_DPFCUNIT_CLOCK_GATE_DISABLE (1 << 9) |
| #define ILK_DPFCRUNIT_CLOCK_GATE_DISABLE (1 << 8) |
| #define ILK_DPFDUNIT_CLOCK_GATE_ENABLE (1 << 7) |
| #define ILK_DPARBUNIT_CLOCK_GATE_ENABLE (1 << 5) |
| |
| #define IVB_CHICKEN3 _MMIO(0x4200c) |
| # define CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE (1 << 5) |
| # define CHICKEN3_DGMG_DONE_FIX_DISABLE (1 << 2) |
| |
| #define CHICKEN_PAR1_1 _MMIO(0x42080) |
| #define DPA_MASK_VBLANK_SRD (1 << 15) |
| #define FORCE_ARB_IDLE_PLANES (1 << 14) |
| #define SKL_EDP_PSR_FIX_RDWRAP (1 << 3) |
| |
| #define CHICKEN_PAR2_1 _MMIO(0x42090) |
| #define KVM_CONFIG_CHANGE_NOTIFICATION_SELECT (1 << 14) |
| |
| #define _CHICKEN_PIPESL_1_A 0x420b0 |
| #define _CHICKEN_PIPESL_1_B 0x420b4 |
| #define HSW_FBCQ_DIS (1 << 22) |
| #define BDW_DPRS_MASK_VBLANK_SRD (1 << 0) |
| #define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B) |
| |
| #define DISP_ARB_CTL _MMIO(0x45000) |
| #define DISP_FBC_MEMORY_WAKE (1<<31) |
| #define DISP_TILE_SURFACE_SWIZZLING (1<<13) |
| #define DISP_FBC_WM_DIS (1<<15) |
| #define DISP_ARB_CTL2 _MMIO(0x45004) |
| #define DISP_DATA_PARTITION_5_6 (1<<6) |
| #define DBUF_CTL _MMIO(0x45008) |
| #define DBUF_POWER_REQUEST (1<<31) |
| #define DBUF_POWER_STATE (1<<30) |
| #define GEN7_MSG_CTL _MMIO(0x45010) |
| #define WAIT_FOR_PCH_RESET_ACK (1<<1) |
| #define WAIT_FOR_PCH_FLR_ACK (1<<0) |
| #define HSW_NDE_RSTWRN_OPT _MMIO(0x46408) |
| #define RESET_PCH_HANDSHAKE_ENABLE (1<<4) |
| |
| #define GEN8_CHICKEN_DCPR_1 _MMIO(0x46430) |
| #define MASK_WAKEMEM (1<<13) |
| |
| #define SKL_DFSM _MMIO(0x51000) |
| #define SKL_DFSM_CDCLK_LIMIT_MASK (3 << 23) |
| #define SKL_DFSM_CDCLK_LIMIT_675 (0 << 23) |
| #define SKL_DFSM_CDCLK_LIMIT_540 (1 << 23) |
| #define SKL_DFSM_CDCLK_LIMIT_450 (2 << 23) |
| #define SKL_DFSM_CDCLK_LIMIT_337_5 (3 << 23) |
| #define SKL_DFSM_PIPE_A_DISABLE (1 << 30) |
| #define SKL_DFSM_PIPE_B_DISABLE (1 << 21) |
| #define SKL_DFSM_PIPE_C_DISABLE (1 << 28) |
| |
| #define GEN7_FF_SLICE_CS_CHICKEN1 _MMIO(0x20e0) |
| #define GEN9_FFSC_PERCTX_PREEMPT_CTRL (1<<14) |
| |
| #define FF_SLICE_CS_CHICKEN2 _MMIO(0x20e4) |
| #define GEN9_TSG_BARRIER_ACK_DISABLE (1<<8) |
| #define GEN9_POOLED_EU_LOAD_BALANCING_FIX_DISABLE (1<<10) |
| |
| #define GEN9_CS_DEBUG_MODE1 _MMIO(0x20ec) |
| #define GEN9_CTX_PREEMPT_REG _MMIO(0x2248) |
| #define GEN8_CS_CHICKEN1 _MMIO(0x2580) |
| |
| /* GEN7 chicken */ |
| #define GEN7_COMMON_SLICE_CHICKEN1 _MMIO(0x7010) |
| # define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26)) |
| # define GEN9_RHWO_OPTIMIZATION_DISABLE (1<<14) |
| #define COMMON_SLICE_CHICKEN2 _MMIO(0x7014) |
| # define GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION (1<<8) |
| # define GEN8_CSC2_SBE_VUE_CACHE_CONSERVATIVE (1<<0) |
| |
| #define HIZ_CHICKEN _MMIO(0x7018) |
| # define CHV_HZ_8X8_MODE_IN_1X (1<<15) |
| # define BDW_HIZ_POWER_COMPILER_CLOCK_GATING_DISABLE (1<<3) |
| |
| #define GEN9_SLICE_COMMON_ECO_CHICKEN0 _MMIO(0x7308) |
| #define DISABLE_PIXEL_MASK_CAMMING (1<<14) |
| |
| #define GEN7_L3SQCREG1 _MMIO(0xB010) |
| #define VLV_B0_WA_L3SQCREG1_VALUE 0x00D30000 |
| |
| #define GEN8_L3SQCREG1 _MMIO(0xB100) |
| /* |
| * Note that on CHV the following has an off-by-one error wrt. to BSpec. |
| * Using the formula in BSpec leads to a hang, while the formula here works |
| * fine and matches the formulas for all other platforms. A BSpec change |
| * request has been filed to clarify this. |
| */ |
| #define L3_GENERAL_PRIO_CREDITS(x) (((x) >> 1) << 19) |
| #define L3_HIGH_PRIO_CREDITS(x) (((x) >> 1) << 14) |
| |
| #define GEN7_L3CNTLREG1 _MMIO(0xB01C) |
| #define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C47FF8C |
| #define GEN7_L3AGDIS (1<<19) |
| #define GEN7_L3CNTLREG2 _MMIO(0xB020) |
| #define GEN7_L3CNTLREG3 _MMIO(0xB024) |
| |
| #define GEN7_L3_CHICKEN_MODE_REGISTER _MMIO(0xB030) |
| #define GEN7_WA_L3_CHICKEN_MODE 0x20000000 |
| |
| #define GEN7_L3SQCREG4 _MMIO(0xb034) |
| #define L3SQ_URB_READ_CAM_MATCH_DISABLE (1<<27) |
| |
| #define GEN8_L3SQCREG4 _MMIO(0xb118) |
| #define GEN8_LQSC_RO_PERF_DIS (1<<27) |
| #define GEN8_LQSC_FLUSH_COHERENT_LINES (1<<21) |
| |
| /* GEN8 chicken */ |
| #define HDC_CHICKEN0 _MMIO(0x7300) |
| #define HDC_FORCE_CSR_NON_COHERENT_OVR_DISABLE (1<<15) |
| #define HDC_FENCE_DEST_SLM_DISABLE (1<<14) |
| #define HDC_DONOT_FETCH_MEM_WHEN_MASKED (1<<11) |
| #define HDC_FORCE_CONTEXT_SAVE_RESTORE_NON_COHERENT (1<<5) |
| #define HDC_FORCE_NON_COHERENT (1<<4) |
| #define HDC_BARRIER_PERFORMANCE_DISABLE (1<<10) |
| |
| #define GEN8_HDC_CHICKEN1 _MMIO(0x7304) |
| |
| /* GEN9 chicken */ |
| #define SLICE_ECO_CHICKEN0 _MMIO(0x7308) |
| #define PIXEL_MASK_CAMMING_DISABLE (1 << 14) |
| |
| /* WaCatErrorRejectionIssue */ |
| #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG _MMIO(0x9030) |
| #define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11) |
| |
| #define HSW_SCRATCH1 _MMIO(0xb038) |
| #define HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE (1<<27) |
| |
| #define BDW_SCRATCH1 _MMIO(0xb11c) |
| #define GEN9_LBS_SLA_RETRY_TIMER_DECREMENT_ENABLE (1<<2) |
| |
| /* PCH */ |
| |
| /* south display engine interrupt: IBX */ |
| #define SDE_AUDIO_POWER_D (1 << 27) |
| #define SDE_AUDIO_POWER_C (1 << 26) |
| #define SDE_AUDIO_POWER_B (1 << 25) |
| #define SDE_AUDIO_POWER_SHIFT (25) |
| #define SDE_AUDIO_POWER_MASK (7 << SDE_AUDIO_POWER_SHIFT) |
| #define SDE_GMBUS (1 << 24) |
| #define SDE_AUDIO_HDCP_TRANSB (1 << 23) |
| #define SDE_AUDIO_HDCP_TRANSA (1 << 22) |
| #define SDE_AUDIO_HDCP_MASK (3 << 22) |
| #define SDE_AUDIO_TRANSB (1 << 21) |
| #define SDE_AUDIO_TRANSA (1 << 20) |
| #define SDE_AUDIO_TRANS_MASK (3 << 20) |
| #define SDE_POISON (1 << 19) |
| /* 18 reserved */ |
| #define SDE_FDI_RXB (1 << 17) |
| #define SDE_FDI_RXA (1 << 16) |
| #define SDE_FDI_MASK (3 << 16) |
| #define SDE_AUXD (1 << 15) |
| #define SDE_AUXC (1 << 14) |
| #define SDE_AUXB (1 << 13) |
| #define SDE_AUX_MASK (7 << 13) |
| /* 12 reserved */ |
| #define SDE_CRT_HOTPLUG (1 << 11) |
| #define SDE_PORTD_HOTPLUG (1 << 10) |
| #define SDE_PORTC_HOTPLUG (1 << 9) |
| #define SDE_PORTB_HOTPLUG (1 << 8) |
| #define SDE_SDVOB_HOTPLUG (1 << 6) |
| #define SDE_HOTPLUG_MASK (SDE_CRT_HOTPLUG | \ |
| SDE_SDVOB_HOTPLUG | \ |
| SDE_PORTB_HOTPLUG | \ |
| SDE_PORTC_HOTPLUG | \ |
| SDE_PORTD_HOTPLUG) |
| #define SDE_TRANSB_CRC_DONE (1 << 5) |
| #define SDE_TRANSB_CRC_ERR (1 << 4) |
| #define SDE_TRANSB_FIFO_UNDER (1 << 3) |
| #define SDE_TRANSA_CRC_DONE (1 << 2) |
| #define SDE_TRANSA_CRC_ERR (1 << 1) |
| #define SDE_TRANSA_FIFO_UNDER (1 << 0) |
| #define SDE_TRANS_MASK (0x3f) |
| |
| /* south display engine interrupt: CPT/PPT */ |
| #define SDE_AUDIO_POWER_D_CPT (1 << 31) |
| #define SDE_AUDIO_POWER_C_CPT (1 << 30) |
| #define SDE_AUDIO_POWER_B_CPT (1 << 29) |
| #define SDE_AUDIO_POWER_SHIFT_CPT 29 |
| #define SDE_AUDIO_POWER_MASK_CPT (7 << 29) |
| #define SDE_AUXD_CPT (1 << 27) |
| #define SDE_AUXC_CPT (1 << 26) |
| #define SDE_AUXB_CPT (1 << 25) |
| #define SDE_AUX_MASK_CPT (7 << 25) |
| #define SDE_PORTE_HOTPLUG_SPT (1 << 25) |
| #define SDE_PORTA_HOTPLUG_SPT (1 << 24) |
| #define SDE_PORTD_HOTPLUG_CPT (1 << 23) |
| #define SDE_PORTC_HOTPLUG_CPT (1 << 22) |
| #define SDE_PORTB_HOTPLUG_CPT (1 << 21) |
| #define SDE_CRT_HOTPLUG_CPT (1 << 19) |
| #define SDE_SDVOB_HOTPLUG_CPT (1 << 18) |
| #define SDE_HOTPLUG_MASK_CPT (SDE_CRT_HOTPLUG_CPT | \ |
| SDE_SDVOB_HOTPLUG_CPT | \ |
| SDE_PORTD_HOTPLUG_CPT | \ |
| SDE_PORTC_HOTPLUG_CPT | \ |
| SDE_PORTB_HOTPLUG_CPT) |
| #define SDE_HOTPLUG_MASK_SPT (SDE_PORTE_HOTPLUG_SPT | \ |
| SDE_PORTD_HOTPLUG_CPT | \ |
| SDE_PORTC_HOTPLUG_CPT | \ |
| SDE_PORTB_HOTPLUG_CPT | \ |
| SDE_PORTA_HOTPLUG_SPT) |
| #define SDE_GMBUS_CPT (1 << 17) |
| #define SDE_ERROR_CPT (1 << 16) |
| #define SDE_AUDIO_CP_REQ_C_CPT (1 << 10) |
| #define SDE_AUDIO_CP_CHG_C_CPT (1 << 9) |
| #define SDE_FDI_RXC_CPT (1 << 8) |
| #define SDE_AUDIO_CP_REQ_B_CPT (1 << 6) |
| #define SDE_AUDIO_CP_CHG_B_CPT (1 << 5) |
| #define SDE_FDI_RXB_CPT (1 << 4) |
| #define SDE_AUDIO_CP_REQ_A_CPT (1 << 2) |
| #define SDE_AUDIO_CP_CHG_A_CPT (1 << 1) |
| #define SDE_FDI_RXA_CPT (1 << 0) |
| #define SDE_AUDIO_CP_REQ_CPT (SDE_AUDIO_CP_REQ_C_CPT | \ |
| SDE_AUDIO_CP_REQ_B_CPT | \ |
| SDE_AUDIO_CP_REQ_A_CPT) |
| #define SDE_AUDIO_CP_CHG_CPT (SDE_AUDIO_CP_CHG_C_CPT | \ |
| SDE_AUDIO_CP_CHG_B_CPT | \ |
| SDE_AUDIO_CP_CHG_A_CPT) |
| #define SDE_FDI_MASK_CPT (SDE_FDI_RXC_CPT | \ |
| SDE_FDI_RXB_CPT | \ |
| SDE_FDI_RXA_CPT) |
| |
| #define SDEISR _MMIO(0xc4000) |
| #define SDEIMR _MMIO(0xc4004) |
| #define SDEIIR _MMIO(0xc4008) |
| #define SDEIER _MMIO(0xc400c) |
| |
| #define SERR_INT _MMIO(0xc4040) |
| #define SERR_INT_POISON (1<<31) |
| #define SERR_INT_TRANS_C_FIFO_UNDERRUN (1<<6) |
| #define SERR_INT_TRANS_B_FIFO_UNDERRUN (1<<3) |
| #define SERR_INT_TRANS_A_FIFO_UNDERRUN (1<<0) |
| #define SERR_INT_TRANS_FIFO_UNDERRUN(pipe) (1<<((pipe)*3)) |
| |
| /* digital port hotplug */ |
| #define PCH_PORT_HOTPLUG _MMIO(0xc4030) /* SHOTPLUG_CTL */ |
| #define PORTA_HOTPLUG_ENABLE (1 << 28) /* LPT:LP+ & BXT */ |
| #define BXT_DDIA_HPD_INVERT (1 << 27) |
| #define PORTA_HOTPLUG_STATUS_MASK (3 << 24) /* SPT+ & BXT */ |
| #define PORTA_HOTPLUG_NO_DETECT (0 << 24) /* SPT+ & BXT */ |
| #define PORTA_HOTPLUG_SHORT_DETECT (1 << 24) /* SPT+ & BXT */ |
| #define PORTA_HOTPLUG_LONG_DETECT (2 << 24) /* SPT+ & BXT */ |
| #define PORTD_HOTPLUG_ENABLE (1 << 20) |
| #define PORTD_PULSE_DURATION_2ms (0 << 18) /* pre-LPT */ |
| #define PORTD_PULSE_DURATION_4_5ms (1 << 18) /* pre-LPT */ |
| #define PORTD_PULSE_DURATION_6ms (2 << 18) /* pre-LPT */ |
| #define PORTD_PULSE_DURATION_100ms (3 << 18) /* pre-LPT */ |
| #define PORTD_PULSE_DURATION_MASK (3 << 18) /* pre-LPT */ |
| #define PORTD_HOTPLUG_STATUS_MASK (3 << 16) |
| #define PORTD_HOTPLUG_NO_DETECT (0 << 16) |
| #define PORTD_HOTPLUG_SHORT_DETECT (1 << 16) |
| #define PORTD_HOTPLUG_LONG_DETECT (2 << 16) |
| #define PORTC_HOTPLUG_ENABLE (1 << 12) |
| #define BXT_DDIC_HPD_INVERT (1 << 11) |
| #define PORTC_PULSE_DURATION_2ms (0 << 10) /* pre-LPT */ |
| #define PORTC_PULSE_DURATION_4_5ms (1 << 10) /* pre-LPT */ |
| #define PORTC_PULSE_DURATION_6ms (2 << 10) /* pre-LPT */ |
| #define PORTC_PULSE_DURATION_100ms (3 << 10) /* pre-LPT */ |
| #define PORTC_PULSE_DURATION_MASK (3 << 10) /* pre-LPT */ |
| #define PORTC_HOTPLUG_STATUS_MASK (3 << 8) |
| #define PORTC_HOTPLUG_NO_DETECT (0 << 8) |
| #define PORTC_HOTPLUG_SHORT_DETECT (1 << 8) |
| #define PORTC_HOTPLUG_LONG_DETECT (2 << 8) |
| #define PORTB_HOTPLUG_ENABLE (1 << 4) |
| #define BXT_DDIB_HPD_INVERT (1 << 3) |
| #define PORTB_PULSE_DURATION_2ms (0 << 2) /* pre-LPT */ |
| #define PORTB_PULSE_DURATION_4_5ms (1 << 2) /* pre-LPT */ |
| #define PORTB_PULSE_DURATION_6ms (2 << 2) /* pre-LPT */ |
| #define PORTB_PULSE_DURATION_100ms (3 << 2) /* pre-LPT */ |
| #define PORTB_PULSE_DURATION_MASK (3 << 2) /* pre-LPT */ |
| #define PORTB_HOTPLUG_STATUS_MASK (3 << 0) |
| #define PORTB_HOTPLUG_NO_DETECT (0 << 0) |
| #define PORTB_HOTPLUG_SHORT_DETECT (1 << 0) |
| #define PORTB_HOTPLUG_LONG_DETECT (2 << 0) |
| #define BXT_DDI_HPD_INVERT_MASK (BXT_DDIA_HPD_INVERT | \ |
| BXT_DDIB_HPD_INVERT | \ |
| BXT_DDIC_HPD_INVERT) |
| |
| #define PCH_PORT_HOTPLUG2 _MMIO(0xc403C) /* SHOTPLUG_CTL2 SPT+ */ |
| #define PORTE_HOTPLUG_ENABLE (1 << 4) |
| #define PORTE_HOTPLUG_STATUS_MASK (3 << 0) |
| #define PORTE_HOTPLUG_NO_DETECT (0 << 0) |
| #define PORTE_HOTPLUG_SHORT_DETECT (1 << 0) |
| #define PORTE_HOTPLUG_LONG_DETECT (2 << 0) |
| |
| #define PCH_GPIOA _MMIO(0xc5010) |
| #define PCH_GPIOB _MMIO(0xc5014) |
| #define PCH_GPIOC _MMIO(0xc5018) |
| #define PCH_GPIOD _MMIO(0xc501c) |
| #define PCH_GPIOE _MMIO(0xc5020) |
| #define PCH_GPIOF _MMIO(0xc5024) |
| |
| #define PCH_GMBUS0 _MMIO(0xc5100) |
| #define PCH_GMBUS1 _MMIO(0xc5104) |
| #define PCH_GMBUS2 _MMIO(0xc5108) |
| #define PCH_GMBUS3 _MMIO(0xc510c) |
| #define PCH_GMBUS4 _MMIO(0xc5110) |
| #define PCH_GMBUS5 _MMIO(0xc5120) |
| |
| #define _PCH_DPLL_A 0xc6014 |
| #define _PCH_DPLL_B 0xc6018 |
| #define PCH_DPLL(pll) _MMIO(pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B) |
| |
| #define _PCH_FPA0 0xc6040 |
| #define FP_CB_TUNE (0x3<<22) |
| #define _PCH_FPA1 0xc6044 |
| #define _PCH_FPB0 0xc6048 |
| #define _PCH_FPB1 0xc604c |
| #define PCH_FP0(pll) _MMIO(pll == 0 ? _PCH_FPA0 : _PCH_FPB0) |
| #define PCH_FP1(pll) _MMIO(pll == 0 ? _PCH_FPA1 : _PCH_FPB1) |
| |
| #define PCH_DPLL_TEST _MMIO(0xc606c) |
| |
| #define PCH_DREF_CONTROL _MMIO(0xC6200) |
| #define DREF_CONTROL_MASK 0x7fc3 |
| #define DREF_CPU_SOURCE_OUTPUT_DISABLE (0<<13) |
| #define DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD (2<<13) |
| #define DREF_CPU_SOURCE_OUTPUT_NONSPREAD (3<<13) |
| #define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13) |
| #define DREF_SSC_SOURCE_DISABLE (0<<11) |
| #define DREF_SSC_SOURCE_ENABLE (2<<11) |
| #define DREF_SSC_SOURCE_MASK (3<<11) |
| #define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) |
| #define DREF_NONSPREAD_CK505_ENABLE (1<<9) |
| #define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) |
| #define DREF_NONSPREAD_SOURCE_MASK (3<<9) |
| #define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) |
| #define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) |
| #define DREF_SUPERSPREAD_SOURCE_MASK (3<<7) |
| #define DREF_SSC4_DOWNSPREAD (0<<6) |
| #define DREF_SSC4_CENTERSPREAD (1<<6) |
| #define DREF_SSC1_DISABLE (0<<1) |
| #define DREF_SSC1_ENABLE (1<<1) |
| #define DREF_SSC4_DISABLE (0) |
| #define DREF_SSC4_ENABLE (1) |
| |
| #define PCH_RAWCLK_FREQ _MMIO(0xc6204) |
| #define FDL_TP1_TIMER_SHIFT 12 |
| #define FDL_TP1_TIMER_MASK (3<<12) |
| #define FDL_TP2_TIMER_SHIFT 10 |
| #define FDL_TP2_TIMER_MASK (3<<10) |
| #define RAWCLK_FREQ_MASK 0x3ff |
| |
| #define PCH_DPLL_TMR_CFG _MMIO(0xc6208) |
| |
| #define PCH_SSC4_PARMS _MMIO(0xc6210) |
| #define PCH_SSC4_AUX_PARMS _MMIO(0xc6214) |
| |
| #define PCH_DPLL_SEL _MMIO(0xc7000) |
| #define TRANS_DPLLB_SEL(pipe) (1 << ((pipe) * 4)) |
| #define TRANS_DPLLA_SEL(pipe) 0 |
| #define TRANS_DPLL_ENABLE(pipe) (1 << ((pipe) * 4 + 3)) |
| |
| /* transcoder */ |
| |
| #define _PCH_TRANS_HTOTAL_A 0xe0000 |
| #define TRANS_HTOTAL_SHIFT 16 |
| #define TRANS_HACTIVE_SHIFT 0 |
| #define _PCH_TRANS_HBLANK_A 0xe0004 |
| #define TRANS_HBLANK_END_SHIFT 16 |
| #define TRANS_HBLANK_START_SHIFT 0 |
| #define _PCH_TRANS_HSYNC_A 0xe0008 |
| #define TRANS_HSYNC_END_SHIFT 16 |
| #define TRANS_HSYNC_START_SHIFT 0 |
| #define _PCH_TRANS_VTOTAL_A 0xe000c |
| #define TRANS_VTOTAL_SHIFT 16 |
| #define TRANS_VACTIVE_SHIFT 0 |
| #define _PCH_TRANS_VBLANK_A 0xe0010 |
| #define TRANS_VBLANK_END_SHIFT 16 |
| #define TRANS_VBLANK_START_SHIFT 0 |
| #define _PCH_TRANS_VSYNC_A 0xe0014 |
| #define TRANS_VSYNC_END_SHIFT 16 |
| #define TRANS_VSYNC_START_SHIFT 0 |
| #define _PCH_TRANS_VSYNCSHIFT_A 0xe0028 |
| |
| #define _PCH_TRANSA_DATA_M1 0xe0030 |
| #define _PCH_TRANSA_DATA_N1 0xe0034 |
| #define _PCH_TRANSA_DATA_M2 0xe0038 |
| #define _PCH_TRANSA_DATA_N2 0xe003c |
| #define _PCH_TRANSA_LINK_M1 0xe0040 |
| #define _PCH_TRANSA_LINK_N1 0xe0044 |
| #define _PCH_TRANSA_LINK_M2 0xe0048 |
| #define _PCH_TRANSA_LINK_N2 0xe004c |
| |
| /* Per-transcoder DIP controls (PCH) */ |
| #define _VIDEO_DIP_CTL_A 0xe0200 |
| #define _VIDEO_DIP_DATA_A 0xe0208 |
| #define _VIDEO_DIP_GCP_A 0xe0210 |
| #define GCP_COLOR_INDICATION (1 << 2) |
| #define GCP_DEFAULT_PHASE_ENABLE (1 << 1) |
| #define GCP_AV_MUTE (1 << 0) |
| |
| #define _VIDEO_DIP_CTL_B 0xe1200 |
| #define _VIDEO_DIP_DATA_B 0xe1208 |
| #define _VIDEO_DIP_GCP_B 0xe1210 |
| |
| #define TVIDEO_DIP_CTL(pipe) _MMIO_PIPE(pipe, _VIDEO_DIP_CTL_A, _VIDEO_DIP_CTL_B) |
| #define TVIDEO_DIP_DATA(pipe) _MMIO_PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B) |
| #define TVIDEO_DIP_GCP(pipe) _MMIO_PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B) |
| |
| /* Per-transcoder DIP controls (VLV) */ |
| #define _VLV_VIDEO_DIP_CTL_A (VLV_DISPLAY_BASE + 0x60200) |
| #define _VLV_VIDEO_DIP_DATA_A (VLV_DISPLAY_BASE + 0x60208) |
| #define _VLV_VIDEO_DIP_GDCP_PAYLOAD_A (VLV_DISPLAY_BASE + 0x60210) |
| |
| #define _VLV_VIDEO_DIP_CTL_B (VLV_DISPLAY_BASE + 0x61170) |
| #define _VLV_VIDEO_DIP_DATA_B (VLV_DISPLAY_BASE + 0x61174) |
| #define _VLV_VIDEO_DIP_GDCP_PAYLOAD_B (VLV_DISPLAY_BASE + 0x61178) |
| |
| #define _CHV_VIDEO_DIP_CTL_C (VLV_DISPLAY_BASE + 0x611f0) |
| #define _CHV_VIDEO_DIP_DATA_C (VLV_DISPLAY_BASE + 0x611f4) |
| #define _CHV_VIDEO_DIP_GDCP_PAYLOAD_C (VLV_DISPLAY_BASE + 0x611f8) |
| |
| #define VLV_TVIDEO_DIP_CTL(pipe) \ |
| _MMIO_PIPE3((pipe), _VLV_VIDEO_DIP_CTL_A, \ |
| _VLV_VIDEO_DIP_CTL_B, _CHV_VIDEO_DIP_CTL_C) |
| #define VLV_TVIDEO_DIP_DATA(pipe) \ |
| _MMIO_PIPE3((pipe), _VLV_VIDEO_DIP_DATA_A, \ |
| _VLV_VIDEO_DIP_DATA_B, _CHV_VIDEO_DIP_DATA_C) |
| #define VLV_TVIDEO_DIP_GCP(pipe) \ |
| _MMIO_PIPE3((pipe), _VLV_VIDEO_DIP_GDCP_PAYLOAD_A, \ |
| _VLV_VIDEO_DIP_GDCP_PAYLOAD_B, _CHV_VIDEO_DIP_GDCP_PAYLOAD_C) |
| |
| /* Haswell DIP controls */ |
| |
| #define _HSW_VIDEO_DIP_CTL_A 0x60200 |
| #define _HSW_VIDEO_DIP_AVI_DATA_A 0x60220 |
| #define _HSW_VIDEO_DIP_VS_DATA_A 0x60260 |
| #define _HSW_VIDEO_DIP_SPD_DATA_A 0x602A0 |
| #define _HSW_VIDEO_DIP_GMP_DATA_A 0x602E0 |
| #define _HSW_VIDEO_DIP_VSC_DATA_A 0x60320 |
| #define _HSW_VIDEO_DIP_AVI_ECC_A 0x60240 |
| #define _HSW_VIDEO_DIP_VS_ECC_A 0x60280 |
| #define _HSW_VIDEO_DIP_SPD_ECC_A 0x602C0 |
| #define _HSW_VIDEO_DIP_GMP_ECC_A 0x60300 |
| #define _HSW_VIDEO_DIP_VSC_ECC_A 0x60344 |
| #define _HSW_VIDEO_DIP_GCP_A 0x60210 |
| |
| #define _HSW_VIDEO_DIP_CTL_B 0x61200 |
| #define _HSW_VIDEO_DIP_AVI_DATA_B 0x61220 |
| #define _HSW_VIDEO_DIP_VS_DATA_B 0x61260 |
| #define _HSW_VIDEO_DIP_SPD_DATA_B 0x612A0 |
| #define _HSW_VIDEO_DIP_GMP_DATA_B 0x612E0 |
| #define _HSW_VIDEO_DIP_VSC_DATA_B 0x61320 |
| #define _HSW_VIDEO_DIP_BVI_ECC_B 0x61240 |
| #define _HSW_VIDEO_DIP_VS_ECC_B 0x61280 |
| #define _HSW_VIDEO_DIP_SPD_ECC_B 0x612C0 |
| #define _HSW_VIDEO_DIP_GMP_ECC_B 0x61300 |
| #define _HSW_VIDEO_DIP_VSC_ECC_B 0x61344 |
| #define _HSW_VIDEO_DIP_GCP_B 0x61210 |
| |
| #define HSW_TVIDEO_DIP_CTL(trans) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_CTL_A) |
| #define HSW_TVIDEO_DIP_AVI_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_AVI_DATA_A + (i) * 4) |
| #define HSW_TVIDEO_DIP_VS_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VS_DATA_A + (i) * 4) |
| #define HSW_TVIDEO_DIP_SPD_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_SPD_DATA_A + (i) * 4) |
| #define HSW_TVIDEO_DIP_GCP(trans) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_GCP_A) |
| #define HSW_TVIDEO_DIP_VSC_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VSC_DATA_A + (i) * 4) |
| |
| #define _HSW_STEREO_3D_CTL_A 0x70020 |
| #define S3D_ENABLE (1<<31) |
| #define _HSW_STEREO_3D_CTL_B 0x71020 |
| |
| #define HSW_STEREO_3D_CTL(trans) _MMIO_PIPE2(trans, _HSW_STEREO_3D_CTL_A) |
| |
| #define _PCH_TRANS_HTOTAL_B 0xe1000 |
| #define _PCH_TRANS_HBLANK_B 0xe1004 |
| #define _PCH_TRANS_HSYNC_B 0xe1008 |
| #define _PCH_TRANS_VTOTAL_B 0xe100c |
| #define _PCH_TRANS_VBLANK_B 0xe1010 |
| #define _PCH_TRANS_VSYNC_B 0xe1014 |
| #define _PCH_TRANS_VSYNCSHIFT_B 0xe1028 |
| |
| #define PCH_TRANS_HTOTAL(pipe) _MMIO_PIPE(pipe, _PCH_TRANS_HTOTAL_A, _PCH_TRANS_HTOTAL_B) |
| #define PCH_TRANS_HBLANK(pipe) _MMIO_PIPE(pipe, _PCH_TRANS_HBLANK_A, _PCH_TRANS_HBLANK_B) |
| #define PCH_TRANS_HSYNC(pipe) _MMIO_PIPE(pipe, _PCH_TRANS_HSYNC_A, _PCH_TRANS_HSYNC_B) |
| #define PCH_TRANS_VTOTAL(pipe) _MMIO_PIPE(pipe, _PCH_TRANS_VTOTAL_A, _PCH_TRANS_VTOTAL_B) |
| #define PCH_TRANS_VBLANK(pipe) _MMIO_PIPE(pipe, _PCH_TRANS_VBLANK_A, _PCH_TRANS_VBLANK_B) |
| #define PCH_TRANS_VSYNC(pipe) _MMIO_PIPE(pipe, _PCH_TRANS_VSYNC_A, _PCH_TRANS_VSYNC_B) |
| #define PCH_TRANS_VSYNCSHIFT(pipe) _MMIO_PIPE(pipe, _PCH_TRANS_VSYNCSHIFT_A, _PCH_TRANS_VSYNCSHIFT_B) |
| |
| #define _PCH_TRANSB_DATA_M1 0xe1030 |
| #define _PCH_TRANSB_DATA_N1 0xe1034 |
| #define _PCH_TRANSB_DATA_M2 0xe1038 |
| #define _PCH_TRANSB_DATA_N2 0xe103c |
| #define _PCH_TRANSB_LINK_M1 0xe1040 |
| #define _PCH_TRANSB_LINK_N1 0xe1044 |
| #define _PCH_TRANSB_LINK_M2 0xe1048 |
| #define _PCH_TRANSB_LINK_N2 0xe104c |
| |
| #define PCH_TRANS_DATA_M1(pipe) _MMIO_PIPE(pipe, _PCH_TRANSA_DATA_M1, _PCH_TRANSB_DATA_M1) |
| #define PCH_TRANS_DATA_N1(pipe) _MMIO_PIPE(pipe, _PCH_TRANSA_DATA_N1, _PCH_TRANSB_DATA_N1) |
| #define PCH_TRANS_DATA_M2(pipe) _MMIO_PIPE(pipe, _PCH_TRANSA_DATA_M2, _PCH_TRANSB_DATA_M2) |
| #define PCH_TRANS_DATA_N2(pipe) _MMIO_PIPE(pipe, _PCH_TRANSA_DATA_N2, _PCH_TRANSB_DATA_N2) |
| #define PCH_TRANS_LINK_M1(pipe) _MMIO_PIPE(pipe, _PCH_TRANSA_LINK_M1, _PCH_TRANSB_LINK_M1) |
| #define PCH_TRANS_LINK_N1(pipe) _MMIO_PIPE(pipe, _PCH_TRANSA_LINK_N1, _PCH_TRANSB_LINK_N1) |
| #define PCH_TRANS_LINK_M2(pipe) _MMIO_PIPE(pipe, _PCH_TRANSA_LINK_M2, _PCH_TRANSB_LINK_M2) |
| #define PCH_TRANS_LINK_N2(pipe) _MMIO_PIPE(pipe, _PCH_TRANSA_LINK_N2, _PCH_TRANSB_LINK_N2) |
| |
| #define _PCH_TRANSACONF 0xf0008 |
| #define _PCH_TRANSBCONF 0xf1008 |
| #define PCH_TRANSCONF(pipe) _MMIO_PIPE(pipe, _PCH_TRANSACONF, _PCH_TRANSBCONF) |
| #define LPT_TRANSCONF PCH_TRANSCONF(PIPE_A) /* lpt has only one transcoder */ |
| #define TRANS_DISABLE (0<<31) |
| #define TRANS_ENABLE (1<<31) |
| #define TRANS_STATE_MASK (1<<30) |
| #define TRANS_STATE_DISABLE (0<<30) |
| #define TRANS_STATE_ENABLE (1<<30) |
| #define TRANS_FSYNC_DELAY_HB1 (0<<27) |
| #define TRANS_FSYNC_DELAY_HB2 (1<<27) |
| #define TRANS_FSYNC_DELAY_HB3 (2<<27) |
| #define TRANS_FSYNC_DELAY_HB4 (3<<27) |
| #define TRANS_INTERLACE_MASK (7<<21) |
| #define TRANS_PROGRESSIVE (0<<21) |
| #define TRANS_INTERLACED (3<<21) |
| #define TRANS_LEGACY_INTERLACED_ILK (2<<21) |
| #define TRANS_8BPC (0<<5) |
| #define TRANS_10BPC (1<<5) |
| #define TRANS_6BPC (2<<5) |
| #define TRANS_12BPC (3<<5) |
| |
| #define _TRANSA_CHICKEN1 0xf0060 |
| #define _TRANSB_CHICKEN1 0xf1060 |
| #define TRANS_CHICKEN1(pipe) _MMIO_PIPE(pipe, _TRANSA_CHICKEN1, _TRANSB_CHICKEN1) |
| #define TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE (1<<10) |
| #define TRANS_CHICKEN1_DP0UNIT_GC_DISABLE (1<<4) |
| #define _TRANSA_CHICKEN2 0xf0064 |
| #define _TRANSB_CHICKEN2 0xf1064 |
| #define TRANS_CHICKEN2(pipe) _MMIO_PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2) |
| #define TRANS_CHICKEN2_TIMING_OVERRIDE (1<<31) |
| #define TRANS_CHICKEN2_FDI_POLARITY_REVERSED (1<<29) |
| #define TRANS_CHICKEN2_FRAME_START_DELAY_MASK (3<<27) |
| #define TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER (1<<26) |
| #define TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH (1<<25) |
| |
| #define SOUTH_CHICKEN1 _MMIO(0xc2000) |
| #define FDIA_PHASE_SYNC_SHIFT_OVR 19 |
| #define FDIA_PHASE_SYNC_SHIFT_EN 18 |
| #define FDI_PHASE_SYNC_OVR(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_OVR - ((pipe) * 2))) |
| #define FDI_PHASE_SYNC_EN(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_EN - ((pipe) * 2))) |
| #define FDI_BC_BIFURCATION_SELECT (1 << 12) |
| #define SPT_PWM_GRANULARITY (1<<0) |
| #define SOUTH_CHICKEN2 _MMIO(0xc2004) |
| #define FDI_MPHY_IOSFSB_RESET_STATUS (1<<13) |
| #define FDI_MPHY_IOSFSB_RESET_CTL (1<<12) |
| #define LPT_PWM_GRANULARITY (1<<5) |
| #define DPLS_EDP_PPS_FIX_DIS (1<<0) |
| |
| #define _FDI_RXA_CHICKEN 0xc200c |
| #define _FDI_RXB_CHICKEN 0xc2010 |
| #define FDI_RX_PHASE_SYNC_POINTER_OVR (1<<1) |
| #define FDI_RX_PHASE_SYNC_POINTER_EN (1<<0) |
| #define FDI_RX_CHICKEN(pipe) _MMIO_PIPE(pipe, _FDI_RXA_CHICKEN, _FDI_RXB_CHICKEN) |
| |
| #define SOUTH_DSPCLK_GATE_D _MMIO(0xc2020) |
| #define PCH_DPLUNIT_CLOCK_GATE_DISABLE (1<<30) |
| #define PCH_DPLSUNIT_CLOCK_GATE_DISABLE (1<<29) |
| #define PCH_CPUNIT_CLOCK_GATE_DISABLE (1<<14) |
| #define PCH_LP_PARTITION_LEVEL_DISABLE (1<<12) |
| |
| /* CPU: FDI_TX */ |
| #define _FDI_TXA_CTL 0x60100 |
| #define _FDI_TXB_CTL 0x61100 |
| #define FDI_TX_CTL(pipe) _MMIO_PIPE(pipe, _FDI_TXA_CTL, _FDI_TXB_CTL) |
| #define FDI_TX_DISABLE (0<<31) |
| #define FDI_TX_ENABLE (1<<31) |
| #define FDI_LINK_TRAIN_PATTERN_1 (0<<28) |
| #define FDI_LINK_TRAIN_PATTERN_2 (1<<28) |
| #define FDI_LINK_TRAIN_PATTERN_IDLE (2<<28) |
| #define FDI_LINK_TRAIN_NONE (3<<28) |
| #define FDI_LINK_TRAIN_VOLTAGE_0_4V (0<<25) |
| #define FDI_LINK_TRAIN_VOLTAGE_0_6V (1<<25) |
| #define FDI_LINK_TRAIN_VOLTAGE_0_8V (2<<25) |
| #define FDI_LINK_TRAIN_VOLTAGE_1_2V (3<<25) |
| #define FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22) |
| #define FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22) |
| #define FDI_LINK_TRAIN_PRE_EMPHASIS_2X (2<<22) |
| #define FDI_LINK_TRAIN_PRE_EMPHASIS_3X (3<<22) |
| /* ILK always use 400mV 0dB for voltage swing and pre-emphasis level. |
| SNB has different settings. */ |
| /* SNB A-stepping */ |
| #define FDI_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22) |
| #define FDI_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22) |
| #define FDI_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22) |
| #define FDI_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22) |
| /* SNB B-stepping */ |
| #define FDI_LINK_TRAIN_400MV_0DB_SNB_B (0x0<<22) |
| #define FDI_LINK_TRAIN_400MV_6DB_SNB_B (0x3a<<22) |
| #define FDI_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22) |
| #define FDI_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22) |
| #define FDI_LINK_TRAIN_VOL_EMP_MASK (0x3f<<22) |
| #define FDI_DP_PORT_WIDTH_SHIFT 19 |
| #define FDI_DP_PORT_WIDTH_MASK (7 << FDI_DP_PORT_WIDTH_SHIFT) |
| #define FDI_DP_PORT_WIDTH(width) (((width) - 1) << FDI_DP_PORT_WIDTH_SHIFT) |
| #define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18) |
| /* Ironlake: hardwired to 1 */ |
| #define FDI_TX_PLL_ENABLE (1<<14) |
| |
| /* Ivybridge has different bits for lolz */ |
| #define FDI_LINK_TRAIN_PATTERN_1_IVB (0<<8) |
| #define FDI_LINK_TRAIN_PATTERN_2_IVB (1<<8) |
| #define FDI_LINK_TRAIN_PATTERN_IDLE_IVB (2<<8) |
| #define FDI_LINK_TRAIN_NONE_IVB (3<<8) |
| |
| /* both Tx and Rx */ |
| #define FDI_COMPOSITE_SYNC (1<<11) |
| #define FDI_LINK_TRAIN_AUTO (1<<10) |
| #define FDI_SCRAMBLING_ENABLE (0<<7) |
| #define FDI_SCRAMBLING_DISABLE (1<<7) |
| |
| /* FDI_RX, FDI_X is hard-wired to Transcoder_X */ |
| #define _FDI_RXA_CTL 0xf000c |
| #define _FDI_RXB_CTL 0xf100c |
| #define FDI_RX_CTL(pipe) _MMIO_PIPE(pipe, _FDI_RXA_CTL, _FDI_RXB_CTL) |
| #define FDI_RX_ENABLE (1<<31) |
| /* train, dp width same as FDI_TX */ |
| #define FDI_FS_ERRC_ENABLE (1<<27) |
| #define FDI_FE_ERRC_ENABLE (1<<26) |
| #define FDI_RX_POLARITY_REVERSED_LPT (1<<16) |
| #define FDI_8BPC (0<<16) |
| #define FDI_10BPC (1<<16) |
| #define FDI_6BPC (2<<16) |
| #define FDI_12BPC (3<<16) |
| #define FDI_RX_LINK_REVERSAL_OVERRIDE (1<<15) |
| #define FDI_DMI_LINK_REVERSE_MASK (1<<14) |
| #define FDI_RX_PLL_ENABLE (1<<13) |
| #define FDI_FS_ERR_CORRECT_ENABLE (1<<11) |
| #define FDI_FE_ERR_CORRECT_ENABLE (1<<10) |
| #define FDI_FS_ERR_REPORT_ENABLE (1<<9) |
| #define FDI_FE_ERR_REPORT_ENABLE (1<<8) |
| #define FDI_RX_ENHANCE_FRAME_ENABLE (1<<6) |
| #define FDI_PCDCLK (1<<4) |
| /* CPT */ |
| #define FDI_AUTO_TRAINING (1<<10) |
| #define FDI_LINK_TRAIN_PATTERN_1_CPT (0<<8) |
| #define FDI_LINK_TRAIN_PATTERN_2_CPT (1<<8) |
| #define FDI_LINK_TRAIN_PATTERN_IDLE_CPT (2<<8) |
| #define FDI_LINK_TRAIN_NORMAL_CPT (3<<8) |
| #define FDI_LINK_TRAIN_PATTERN_MASK_CPT (3<<8) |
| |
| #define _FDI_RXA_MISC 0xf0010 |
| #define _FDI_RXB_MISC 0xf1010 |
| #define FDI_RX_PWRDN_LANE1_MASK (3<<26) |
| #define FDI_RX_PWRDN_LANE1_VAL(x) ((x)<<26) |
| #define FDI_RX_PWRDN_LANE0_MASK (3<<24) |
| #define FDI_RX_PWRDN_LANE0_VAL(x) ((x)<<24) |
| #define FDI_RX_TP1_TO_TP2_48 (2<<20) |
| #define FDI_RX_TP1_TO_TP2_64 (3<<20) |
| #define FDI_RX_FDI_DELAY_90 (0x90<<0) |
| #define FDI_RX_MISC(pipe) _MMIO_PIPE(pipe, _FDI_RXA_MISC, _FDI_RXB_MISC) |
| |
| #define _FDI_RXA_TUSIZE1 0xf0030 |
| #define _FDI_RXA_TUSIZE2 0xf0038 |
| #define _FDI_RXB_TUSIZE1 0xf1030 |
| #define _FDI_RXB_TUSIZE2 0xf1038 |
| #define FDI_RX_TUSIZE1(pipe) _MMIO_PIPE(pipe, _FDI_RXA_TUSIZE1, _FDI_RXB_TUSIZE1) |
| #define FDI_RX_TUSIZE2(pipe) _MMIO_PIPE(pipe, _FDI_RXA_TUSIZE2, _FDI_RXB_TUSIZE2) |
| |
| /* FDI_RX interrupt register format */ |
| #define FDI_RX_INTER_LANE_ALIGN (1<<10) |
| #define FDI_RX_SYMBOL_LOCK (1<<9) /* train 2 */ |
| #define FDI_RX_BIT_LOCK (1<<8) /* train 1 */ |
| #define FDI_RX_TRAIN_PATTERN_2_FAIL (1<<7) |
| #define FDI_RX_FS_CODE_ERR (1<<6) |
| #define FDI_RX_FE_CODE_ERR (1<<5) |
| #define FDI_RX_SYMBOL_ERR_RATE_ABOVE (1<<4) |
| #define FDI_RX_HDCP_LINK_FAIL (1<<3) |
| #define FDI_RX_PIXEL_FIFO_OVERFLOW (1<<2) |
| #define FDI_RX_CROSS_CLOCK_OVERFLOW (1<<1) |
| #define FDI_RX_SYMBOL_QUEUE_OVERFLOW (1<<0) |
| |
| #define _FDI_RXA_IIR 0xf0014 |
| #define _FDI_RXA_IMR 0xf0018 |
| #define _FDI_RXB_IIR 0xf1014 |
| #define _FDI_RXB_IMR 0xf1018 |
| #define FDI_RX_IIR(pipe) _MMIO_PIPE(pipe, _FDI_RXA_IIR, _FDI_RXB_IIR) |
| #define FDI_RX_IMR(pipe) _MMIO_PIPE(pipe, _FDI_RXA_IMR, _FDI_RXB_IMR) |
| |
| #define FDI_PLL_CTL_1 _MMIO(0xfe000) |
| #define FDI_PLL_CTL_2 _MMIO(0xfe004) |
| |
| #define PCH_LVDS _MMIO(0xe1180) |
| #define LVDS_DETECTED (1 << 1) |
| |
| /* vlv has 2 sets of panel control regs. */ |
| #define _PIPEA_PP_STATUS (VLV_DISPLAY_BASE + 0x61200) |
| #define _PIPEA_PP_CONTROL (VLV_DISPLAY_BASE + 0x61204) |
| #define _PIPEA_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61208) |
| #define PANEL_PORT_SELECT_VLV(port) ((port) << 30) |
| #define _PIPEA_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6120c) |
| #define _PIPEA_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61210) |
| |
| #define _PIPEB_PP_STATUS (VLV_DISPLAY_BASE + 0x61300) |
| #define _PIPEB_PP_CONTROL (VLV_DISPLAY_BASE + 0x61304) |
| #define _PIPEB_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61308) |
| #define _PIPEB_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6130c) |
| #define _PIPEB_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61310) |
| |
| #define VLV_PIPE_PP_STATUS(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_STATUS, _PIPEB_PP_STATUS) |
| #define VLV_PIPE_PP_CONTROL(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_CONTROL, _PIPEB_PP_CONTROL) |
| #define VLV_PIPE_PP_ON_DELAYS(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_ON_DELAYS, _PIPEB_PP_ON_DELAYS) |
| #define VLV_PIPE_PP_OFF_DELAYS(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_OFF_DELAYS, _PIPEB_PP_OFF_DELAYS) |
| #define VLV_PIPE_PP_DIVISOR(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_DIVISOR, _PIPEB_PP_DIVISOR) |
| |
| #define _PCH_PP_STATUS 0xc7200 |
| #define _PCH_PP_CONTROL 0xc7204 |
| #define PANEL_UNLOCK_REGS (0xabcd << 16) |
| #define PANEL_UNLOCK_MASK (0xffff << 16) |
| #define BXT_POWER_CYCLE_DELAY_MASK (0x1f0) |
| #define BXT_POWER_CYCLE_DELAY_SHIFT 4 |
| #define EDP_FORCE_VDD (1 << 3) |
| #define EDP_BLC_ENABLE (1 << 2) |
| #define PANEL_POWER_RESET (1 << 1) |
| #define PANEL_POWER_OFF (0 << 0) |
| #define PANEL_POWER_ON (1 << 0) |
| #define _PCH_PP_ON_DELAYS 0xc7208 |
| #define PANEL_PORT_SELECT_MASK (3 << 30) |
| #define PANEL_PORT_SELECT_LVDS (0 << 30) |
| #define PANEL_PORT_SELECT_DPA (1 << 30) |
| #define PANEL_PORT_SELECT_DPC (2 << 30) |
| #define PANEL_PORT_SELECT_DPD (3 << 30) |
| #define PANEL_POWER_UP_DELAY_MASK (0x1fff0000) |
| #define PANEL_POWER_UP_DELAY_SHIFT 16 |
| #define PANEL_LIGHT_ON_DELAY_MASK (0x1fff) |
| #define PANEL_LIGHT_ON_DELAY_SHIFT 0 |
| |
| #define _PCH_PP_OFF_DELAYS 0xc720c |
| #define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000) |
| #define PANEL_POWER_DOWN_DELAY_SHIFT 16 |
| #define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff) |
| #define PANEL_LIGHT_OFF_DELAY_SHIFT 0 |
| |
| #define _PCH_PP_DIVISOR 0xc7210 |
| #define PP_REFERENCE_DIVIDER_MASK (0xffffff00) |
| #define PP_REFERENCE_DIVIDER_SHIFT 8 |
| #define PANEL_POWER_CYCLE_DELAY_MASK (0x1f) |
| #define PANEL_POWER_CYCLE_DELAY_SHIFT 0 |
| |
| #define PCH_PP_STATUS _MMIO(_PCH_PP_STATUS) |
| #define PCH_PP_CONTROL _MMIO(_PCH_PP_CONTROL) |
| #define PCH_PP_ON_DELAYS _MMIO(_PCH_PP_ON_DELAYS) |
| #define PCH_PP_OFF_DELAYS _MMIO(_PCH_PP_OFF_DELAYS) |
| #define PCH_PP_DIVISOR _MMIO(_PCH_PP_DIVISOR) |
| |
| /* BXT PPS changes - 2nd set of PPS registers */ |
| #define _BXT_PP_STATUS2 0xc7300 |
| #define _BXT_PP_CONTROL2 0xc7304 |
| #define _BXT_PP_ON_DELAYS2 0xc7308 |
| #define _BXT_PP_OFF_DELAYS2 0xc730c |
| |
| #define BXT_PP_STATUS(n) _MMIO_PIPE(n, _PCH_PP_STATUS, _BXT_PP_STATUS2) |
| #define BXT_PP_CONTROL(n) _MMIO_PIPE(n, _PCH_PP_CONTROL, _BXT_PP_CONTROL2) |
| #define BXT_PP_ON_DELAYS(n) _MMIO_PIPE(n, _PCH_PP_ON_DELAYS, _BXT_PP_ON_DELAYS2) |
| #define BXT_PP_OFF_DELAYS(n) _MMIO_PIPE(n, _PCH_PP_OFF_DELAYS, _BXT_PP_OFF_DELAYS2) |
| |
| #define _PCH_DP_B 0xe4100 |
| #define PCH_DP_B _MMIO(_PCH_DP_B) |
| #define _PCH_DPB_AUX_CH_CTL 0xe4110 |
| #define _PCH_DPB_AUX_CH_DATA1 0xe4114 |
| #define _PCH_DPB_AUX_CH_DATA2 0xe4118 |
| #define _PCH_DPB_AUX_CH_DATA3 0xe411c |
| #define _PCH_DPB_AUX_CH_DATA4 0xe4120 |
| #define _PCH_DPB_AUX_CH_DATA5 0xe4124 |
| |
| #define _PCH_DP_C 0xe4200 |
| #define PCH_DP_C _MMIO(_PCH_DP_C) |
| #define _PCH_DPC_AUX_CH_CTL 0xe4210 |
| #define _PCH_DPC_AUX_CH_DATA1 0xe4214 |
| #define _PCH_DPC_AUX_CH_DATA2 0xe4218 |
| #define _PCH_DPC_AUX_CH_DATA3 0xe421c |
| #define _PCH_DPC_AUX_CH_DATA4 0xe4220 |
| #define _PCH_DPC_AUX_CH_DATA5 0xe4224 |
| |
| #define _PCH_DP_D 0xe4300 |
| #define PCH_DP_D _MMIO(_PCH_DP_D) |
| #define _PCH_DPD_AUX_CH_CTL 0xe4310 |
| #define _PCH_DPD_AUX_CH_DATA1 0xe4314 |
| #define _PCH_DPD_AUX_CH_DATA2 0xe4318 |
| #define _PCH_DPD_AUX_CH_DATA3 0xe431c |
| #define _PCH_DPD_AUX_CH_DATA4 0xe4320 |
| #define _PCH_DPD_AUX_CH_DATA5 0xe4324 |
| |
| #define PCH_DP_AUX_CH_CTL(port) _MMIO_PORT((port) - PORT_B, _PCH_DPB_AUX_CH_CTL, _PCH_DPC_AUX_CH_CTL) |
| #define PCH_DP_AUX_CH_DATA(port, i) _MMIO(_PORT((port) - PORT_B, _PCH_DPB_AUX_CH_DATA1, _PCH_DPC_AUX_CH_DATA1) + (i) * 4) /* 5 registers */ |
| |
| /* CPT */ |
| #define PORT_TRANS_A_SEL_CPT 0 |
| #define PORT_TRANS_B_SEL_CPT (1<<29) |
| #define PORT_TRANS_C_SEL_CPT (2<<29) |
| #define PORT_TRANS_SEL_MASK (3<<29) |
| #define PORT_TRANS_SEL_CPT(pipe) ((pipe) << 29) |
| #define PORT_TO_PIPE(val) (((val) & (1<<30)) >> 30) |
| #define PORT_TO_PIPE_CPT(val) (((val) & PORT_TRANS_SEL_MASK) >> 29) |
| #define SDVO_PORT_TO_PIPE_CHV(val) (((val) & (3<<24)) >> 24) |
| #define DP_PORT_TO_PIPE_CHV(val) (((val) & (3<<16)) >> 16) |
| |
| #define _TRANS_DP_CTL_A 0xe0300 |
| #define _TRANS_DP_CTL_B 0xe1300 |
| #define _TRANS_DP_CTL_C 0xe2300 |
| #define TRANS_DP_CTL(pipe) _MMIO_PIPE(pipe, _TRANS_DP_CTL_A, _TRANS_DP_CTL_B) |
| #define TRANS_DP_OUTPUT_ENABLE (1<<31) |
| #define TRANS_DP_PORT_SEL_B (0<<29) |
| #define TRANS_DP_PORT_SEL_C (1<<29) |
| #define TRANS_DP_PORT_SEL_D (2<<29) |
| #define TRANS_DP_PORT_SEL_NONE (3<<29) |
| #define TRANS_DP_PORT_SEL_MASK (3<<29) |
| #define TRANS_DP_PIPE_TO_PORT(val) ((((val) & TRANS_DP_PORT_SEL_MASK) >> 29) + PORT_B) |
| #define TRANS_DP_AUDIO_ONLY (1<<26) |
| #define TRANS_DP_ENH_FRAMING (1<<18) |
| #define TRANS_DP_8BPC (0<<9) |
| #define TRANS_DP_10BPC (1<<9) |
| #define TRANS_DP_6BPC (2<<9) |
| #define TRANS_DP_12BPC (3<<9) |
| #define TRANS_DP_BPC_MASK (3<<9) |
| #define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4) |
| #define TRANS_DP_VSYNC_ACTIVE_LOW 0 |
| #define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3) |
| #define TRANS_DP_HSYNC_ACTIVE_LOW 0 |
| #define TRANS_DP_SYNC_MASK (3<<3) |
| |
| /* SNB eDP training params */ |
| /* SNB A-stepping */ |
| #define EDP_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22) |
| #define EDP_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22) |
| #define EDP_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22) |
| #define EDP_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22) |
| /* SNB B-stepping */ |
| #define EDP_LINK_TRAIN_400_600MV_0DB_SNB_B (0x0<<22) |
| #define EDP_LINK_TRAIN_400MV_3_5DB_SNB_B (0x1<<22) |
| #define EDP_LINK_TRAIN_400_600MV_6DB_SNB_B (0x3a<<22) |
| #define EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B (0x39<<22) |
| #define EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B (0x38<<22) |
| #define EDP_LINK_TRAIN_VOL_EMP_MASK_SNB (0x3f<<22) |
| |
| /* IVB */ |
| #define EDP_LINK_TRAIN_400MV_0DB_IVB (0x24 <<22) |
| #define EDP_LINK_TRAIN_400MV_3_5DB_IVB (0x2a <<22) |
| #define EDP_LINK_TRAIN_400MV_6DB_IVB (0x2f <<22) |
| #define EDP_LINK_TRAIN_600MV_0DB_IVB (0x30 <<22) |
| #define EDP_LINK_TRAIN_600MV_3_5DB_IVB (0x36 <<22) |
| #define EDP_LINK_TRAIN_800MV_0DB_IVB (0x38 <<22) |
| #define EDP_LINK_TRAIN_800MV_3_5DB_IVB (0x3e <<22) |
| |
| /* legacy values */ |
| #define EDP_LINK_TRAIN_500MV_0DB_IVB (0x00 <<22) |
| #define EDP_LINK_TRAIN_1000MV_0DB_IVB (0x20 <<22) |
| #define EDP_LINK_TRAIN_500MV_3_5DB_IVB (0x02 <<22) |
| #define EDP_LINK_TRAIN_1000MV_3_5DB_IVB (0x22 <<22) |
| #define EDP_LINK_TRAIN_1000MV_6DB_IVB (0x23 <<22) |
| |
| #define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22) |
| |
| #define VLV_PMWGICZ _MMIO(0x1300a4) |
| |
| #define RC6_LOCATION _MMIO(0xD40) |
| #define RC6_CTX_IN_DRAM (1 << 0) |
| #define RC6_CTX_BASE _MMIO(0xD48) |
| #define RC6_CTX_BASE_MASK 0xFFFFFFF0 |
| #define PWRCTX_MAXCNT_RCSUNIT _MMIO(0x2054) |
| #define PWRCTX_MAXCNT_VCSUNIT0 _MMIO(0x12054) |
| #define PWRCTX_MAXCNT_BCSUNIT _MMIO(0x22054) |
| #define PWRCTX_MAXCNT_VECSUNIT _MMIO(0x1A054) |
| #define PWRCTX_MAXCNT_VCSUNIT1 _MMIO(0x1C054) |
| #define IDLE_TIME_MASK 0xFFFFF |
| #define FORCEWAKE _MMIO(0xA18C) |
| #define FORCEWAKE_VLV _MMIO(0x1300b0) |
| #define FORCEWAKE_ACK_VLV _MMIO(0x1300b4) |
| #define FORCEWAKE_MEDIA_VLV _MMIO(0x1300b8) |
| #define FORCEWAKE_ACK_MEDIA_VLV _MMIO(0x1300bc) |
| #define FORCEWAKE_ACK_HSW _MMIO(0x130044) |
| #define FORCEWAKE_ACK _MMIO(0x130090) |
| #define VLV_GTLC_WAKE_CTRL _MMIO(0x130090) |
| #define VLV_GTLC_RENDER_CTX_EXISTS (1 << 25) |
| #define VLV_GTLC_MEDIA_CTX_EXISTS (1 << 24) |
| #define VLV_GTLC_ALLOWWAKEREQ (1 << 0) |
| |
| #define VLV_GTLC_PW_STATUS _MMIO(0x130094) |
| #define VLV_GTLC_ALLOWWAKEACK (1 << 0) |
| #define VLV_GTLC_ALLOWWAKEERR (1 << 1) |
| #define VLV_GTLC_PW_MEDIA_STATUS_MASK (1 << 5) |
| #define VLV_GTLC_PW_RENDER_STATUS_MASK (1 << 7) |
| #define FORCEWAKE_MT _MMIO(0xa188) /* multi-threaded */ |
| #define FORCEWAKE_MEDIA_GEN9 _MMIO(0xa270) |
| #define FORCEWAKE_RENDER_GEN9 _MMIO(0xa278) |
| #define FORCEWAKE_BLITTER_GEN9 _MMIO(0xa188) |
| #define FORCEWAKE_ACK_MEDIA_GEN9 _MMIO(0x0D88) |
| #define FORCEWAKE_ACK_RENDER_GEN9 _MMIO(0x0D84) |
| #define FORCEWAKE_ACK_BLITTER_GEN9 _MMIO(0x130044) |
| #define FORCEWAKE_KERNEL 0x1 |
| #define FORCEWAKE_USER 0x2 |
| #define FORCEWAKE_MT_ACK _MMIO(0x130040) |
| #define ECOBUS _MMIO(0xa180) |
| #define FORCEWAKE_MT_ENABLE (1<<5) |
| #define VLV_SPAREG2H _MMIO(0xA194) |
| |
| #define GTFIFODBG _MMIO(0x120000) |
| #define GT_FIFO_SBDEDICATE_FREE_ENTRY_CHV (0x1f << 20) |
| #define GT_FIFO_FREE_ENTRIES_CHV (0x7f << 13) |
| #define GT_FIFO_SBDROPERR (1<<6) |
| #define GT_FIFO_BLOBDROPERR (1<<5) |
| #define GT_FIFO_SB_READ_ABORTERR (1<<4) |
| #define GT_FIFO_DROPERR (1<<3) |
| #define GT_FIFO_OVFERR (1<<2) |
| #define GT_FIFO_IAWRERR (1<<1) |
| #define GT_FIFO_IARDERR (1<<0) |
| |
| #define GTFIFOCTL _MMIO(0x120008) |
| #define GT_FIFO_FREE_ENTRIES_MASK 0x7f |
| #define GT_FIFO_NUM_RESERVED_ENTRIES 20 |
| #define GT_FIFO_CTL_BLOCK_ALL_POLICY_STALL (1 << 12) |
| #define GT_FIFO_CTL_RC6_POLICY_STALL (1 << 11) |
| |
| #define HSW_IDICR _MMIO(0x9008) |
| #define IDIHASHMSK(x) (((x) & 0x3f) << 16) |
| #define HSW_EDRAM_CAP _MMIO(0x120010) |
| #define EDRAM_ENABLED 0x1 |
| #define EDRAM_NUM_BANKS(cap) (((cap) >> 1) & 0xf) |
| #define EDRAM_WAYS_IDX(cap) (((cap) >> 5) & 0x7) |
| #define EDRAM_SETS_IDX(cap) (((cap) >> 8) & 0x3) |
| |
| #define GEN6_UCGCTL1 _MMIO(0x9400) |
| # define GEN6_GAMUNIT_CLOCK_GATE_DISABLE (1 << 22) |
| # define GEN6_EU_TCUNIT_CLOCK_GATE_DISABLE (1 << 16) |
| # define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) |
| # define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7) |
| |
| #define GEN6_UCGCTL2 _MMIO(0x9404) |
| # define GEN6_VFUNIT_CLOCK_GATE_DISABLE (1 << 31) |
| # define GEN7_VDSUNIT_CLOCK_GATE_DISABLE (1 << 30) |
| # define GEN7_TDLUNIT_CLOCK_GATE_DISABLE (1 << 22) |
| # define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) |
| # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) |
| # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) |
| |
| #define GEN6_UCGCTL3 _MMIO(0x9408) |
| |
| #define GEN7_UCGCTL4 _MMIO(0x940c) |
| #define GEN7_L3BANK2X_CLOCK_GATE_DISABLE (1<<25) |
| #define GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE (1<<14) |
| |
| #define GEN6_RCGCTL1 _MMIO(0x9410) |
| #define GEN6_RCGCTL2 _MMIO(0x9414) |
| #define GEN6_RSTCTL _MMIO(0x9420) |
| |
| #define GEN8_UCGCTL6 _MMIO(0x9430) |
| #define GEN8_GAPSUNIT_CLOCK_GATE_DISABLE (1<<24) |
| #define GEN8_SDEUNIT_CLOCK_GATE_DISABLE (1<<14) |
| #define GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ (1<<28) |
| |
| #define GEN6_GFXPAUSE _MMIO(0xA000) |
| #define GEN6_RPNSWREQ _MMIO(0xA008) |
| #define GEN6_TURBO_DISABLE (1<<31) |
| #define GEN6_FREQUENCY(x) ((x)<<25) |
| #define HSW_FREQUENCY(x) ((x)<<24) |
| #define GEN9_FREQUENCY(x) ((x)<<23) |
| #define GEN6_OFFSET(x) ((x)<<19) |
| #define GEN6_AGGRESSIVE_TURBO (0<<15) |
| #define GEN6_RC_VIDEO_FREQ _MMIO(0xA00C) |
| #define GEN6_RC_CONTROL _MMIO(0xA090) |
| #define GEN6_RC_CTL_RC6pp_ENABLE (1<<16) |
| #define GEN6_RC_CTL_RC6p_ENABLE (1<<17) |
| #define GEN6_RC_CTL_RC6_ENABLE (1<<18) |
| #define GEN6_RC_CTL_RC1e_ENABLE (1<<20) |
| #define GEN6_RC_CTL_RC7_ENABLE (1<<22) |
| #define VLV_RC_CTL_CTX_RST_PARALLEL (1<<24) |
| #define GEN7_RC_CTL_TO_MODE (1<<28) |
| #define GEN6_RC_CTL_EI_MODE(x) ((x)<<27) |
| #define GEN6_RC_CTL_HW_ENABLE (1<<31) |
| #define GEN6_RP_DOWN_TIMEOUT _MMIO(0xA010) |
| #define GEN6_RP_INTERRUPT_LIMITS _MMIO(0xA014) |
| #define GEN6_RPSTAT1 _MMIO(0xA01C) |
| #define GEN6_CAGF_SHIFT 8 |
| #define HSW_CAGF_SHIFT 7 |
| #define GEN9_CAGF_SHIFT 23 |
| #define GEN6_CAGF_MASK (0x7f << GEN6_CAGF_SHIFT) |
| #define HSW_CAGF_MASK (0x7f << HSW_CAGF_SHIFT) |
| #define GEN9_CAGF_MASK (0x1ff << GEN9_CAGF_SHIFT) |
| #define GEN6_RP_CONTROL _MMIO(0xA024) |
| #define GEN6_RP_MEDIA_TURBO (1<<11) |
| #define GEN6_RP_MEDIA_MODE_MASK (3<<9) |
| #define GEN6_RP_MEDIA_HW_TURBO_MODE (3<<9) |
| #define GEN6_RP_MEDIA_HW_NORMAL_MODE (2<<9) |
| #define GEN6_RP_MEDIA_HW_MODE (1<<9) |
| #define GEN6_RP_MEDIA_SW_MODE (0<<9) |
| #define GEN6_RP_MEDIA_IS_GFX (1<<8) |
| #define GEN6_RP_ENABLE (1<<7) |
| #define GEN6_RP_UP_IDLE_MIN (0x1<<3) |
| #define GEN6_RP_UP_BUSY_AVG (0x2<<3) |
| #define GEN6_RP_UP_BUSY_CONT (0x4<<3) |
| #define GEN6_RP_DOWN_IDLE_AVG (0x2<<0) |
| #define GEN6_RP_DOWN_IDLE_CONT (0x1<<0) |
| #define GEN6_RP_UP_THRESHOLD _MMIO(0xA02C) |
| #define GEN6_RP_DOWN_THRESHOLD _MMIO(0xA030) |
| #define GEN6_RP_CUR_UP_EI _MMIO(0xA050) |
| #define GEN6_CURICONT_MASK 0xffffff |
| #define GEN6_RP_CUR_UP _MMIO(0xA054) |
| #define GEN6_CURBSYTAVG_MASK 0xffffff |
| #define GEN6_RP_PREV_UP _MMIO(0xA058) |
| #define GEN6_RP_CUR_DOWN_EI _MMIO(0xA05C) |
| #define GEN6_CURIAVG_MASK 0xffffff |
| #define GEN6_RP_CUR_DOWN _MMIO(0xA060) |
| #define GEN6_RP_PREV_DOWN _MMIO(0xA064) |
| #define GEN6_RP_UP_EI _MMIO(0xA068) |
| #define GEN6_RP_DOWN_EI _MMIO(0xA06C) |
| #define GEN6_RP_IDLE_HYSTERSIS _MMIO(0xA070) |
| #define GEN6_RPDEUHWTC _MMIO(0xA080) |
| #define GEN6_RPDEUC _MMIO(0xA084) |
| #define GEN6_RPDEUCSW _MMIO(0xA088) |
| #define GEN6_RC_STATE _MMIO(0xA094) |
| #define RC_SW_TARGET_STATE_SHIFT 16 |
| #define RC_SW_TARGET_STATE_MASK (7 << RC_SW_TARGET_STATE_SHIFT) |
| #define GEN6_RC1_WAKE_RATE_LIMIT _MMIO(0xA098) |
| #define GEN6_RC6_WAKE_RATE_LIMIT _MMIO(0xA09C) |
| #define GEN6_RC6pp_WAKE_RATE_LIMIT _MMIO(0xA0A0) |
| #define GEN6_RC_EVALUATION_INTERVAL _MMIO(0xA0A8) |
| #define GEN6_RC_IDLE_HYSTERSIS _MMIO(0xA0AC) |
| #define GEN6_RC_SLEEP _MMIO(0xA0B0) |
| #define GEN6_RCUBMABDTMR _MMIO(0xA0B0) |
| #define GEN6_RC1e_THRESHOLD _MMIO(0xA0B4) |
| #define GEN6_RC6_THRESHOLD _MMIO(0xA0B8) |
| #define GEN6_RC6p_THRESHOLD _MMIO(0xA0BC) |
| #define VLV_RCEDATA _MMIO(0xA0BC) |
| #define GEN6_RC6pp_THRESHOLD _MMIO(0xA0C0) |
| #define GEN6_PMINTRMSK _MMIO(0xA168) |
| #define GEN8_PMINTR_REDIRECT_TO_NON_DISP (1<<31) |
| #define GEN8_MISC_CTRL0 _MMIO(0xA180) |
| #define VLV_PWRDWNUPCTL _MMIO(0xA294) |
| #define GEN9_MEDIA_PG_IDLE_HYSTERESIS _MMIO(0xA0C4) |
| #define GEN9_RENDER_PG_IDLE_HYSTERESIS _MMIO(0xA0C8) |
| #define GEN9_PG_ENABLE _MMIO(0xA210) |
| #define GEN9_RENDER_PG_ENABLE (1<<0) |
| #define GEN9_MEDIA_PG_ENABLE (1<<1) |
| #define GEN8_PUSHBUS_CONTROL _MMIO(0xA248) |
| #define GEN8_PUSHBUS_ENABLE _MMIO(0xA250) |
| #define GEN8_PUSHBUS_SHIFT _MMIO(0xA25C) |
| |
| #define VLV_CHICKEN_3 _MMIO(VLV_DISPLAY_BASE + 0x7040C) |
| #define PIXEL_OVERLAP_CNT_MASK (3 << 30) |
| #define PIXEL_OVERLAP_CNT_SHIFT 30 |
| |
| #define GEN6_PMISR _MMIO(0x44020) |
| #define GEN6_PMIMR _MMIO(0x44024) /* rps_lock */ |
| #define GEN6_PMIIR _MMIO(0x44028) |
| #define GEN6_PMIER _MMIO(0x4402C) |
| #define GEN6_PM_MBOX_EVENT (1<<25) |
| #define GEN6_PM_THERMAL_EVENT (1<<24) |
| #define GEN6_PM_RP_DOWN_TIMEOUT (1<<6) |
| #define GEN6_PM_RP_UP_THRESHOLD (1<<5) |
| #define GEN6_PM_RP_DOWN_THRESHOLD (1<<4) |
| #define GEN6_PM_RP_UP_EI_EXPIRED (1<<2) |
| #define GEN6_PM_RP_DOWN_EI_EXPIRED (1<<1) |
| #define GEN6_PM_RPS_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \ |
| GEN6_PM_RP_DOWN_THRESHOLD | \ |
| GEN6_PM_RP_DOWN_TIMEOUT) |
| |
| #define GEN7_GT_SCRATCH(i) _MMIO(0x4F100 + (i) * 4) |
| #define GEN7_GT_SCRATCH_REG_NUM 8 |
| |
| #define VLV_GTLC_SURVIVABILITY_REG _MMIO(0x130098) |
| #define VLV_GFX_CLK_STATUS_BIT (1<<3) |
| #define VLV_GFX_CLK_FORCE_ON_BIT (1<<2) |
| |
| #define GEN6_GT_GFX_RC6_LOCKED _MMIO(0x138104) |
| #define VLV_COUNTER_CONTROL _MMIO(0x138104) |
| #define VLV_COUNT_RANGE_HIGH (1<<15) |
| #define VLV_MEDIA_RC0_COUNT_EN (1<<5) |
| #define VLV_RENDER_RC0_COUNT_EN (1<<4) |
| #define VLV_MEDIA_RC6_COUNT_EN (1<<1) |
| #define VLV_RENDER_RC6_COUNT_EN (1<<0) |
| #define GEN6_GT_GFX_RC6 _MMIO(0x138108) |
| #define VLV_GT_RENDER_RC6 _MMIO(0x138108) |
| #define VLV_GT_MEDIA_RC6 _MMIO(0x13810C) |
| |
| #define GEN6_GT_GFX_RC6p _MMIO(0x13810C) |
| #define GEN6_GT_GFX_RC6pp _MMIO(0x138110) |
| #define VLV_RENDER_C0_COUNT _MMIO(0x138118) |
| #define VLV_MEDIA_C0_COUNT _MMIO(0x13811C) |
| |
| #define GEN6_PCODE_MAILBOX _MMIO(0x138124) |
| #define GEN6_PCODE_READY (1<<31) |
| #define GEN6_PCODE_WRITE_RC6VIDS 0x4 |
| #define GEN6_PCODE_READ_RC6VIDS 0x5 |
| #define GEN6_ENCODE_RC6_VID(mv) (((mv) - 245) / 5) |
| #define GEN6_DECODE_RC6_VID(vids) (((vids) * 5) + 245) |
| #define BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ 0x18 |
| #define GEN9_PCODE_READ_MEM_LATENCY 0x6 |
| #define GEN9_MEM_LATENCY_LEVEL_MASK 0xFF |
| #define GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT 8 |
| #define GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT 16 |
| #define GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT 24 |
| #define SKL_PCODE_CDCLK_CONTROL 0x7 |
| #define SKL_CDCLK_PREPARE_FOR_CHANGE 0x3 |
| #define SKL_CDCLK_READY_FOR_CHANGE 0x1 |
| #define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x8 |
| #define GEN6_PCODE_READ_MIN_FREQ_TABLE 0x9 |
| #define GEN6_READ_OC_PARAMS 0xc |
| #define GEN6_PCODE_READ_D_COMP 0x10 |
| #define GEN6_PCODE_WRITE_D_COMP 0x11 |
| #define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17 |
| #define DISPLAY_IPS_CONTROL 0x19 |
| #define HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A |
| #define GEN6_PCODE_DATA _MMIO(0x138128) |
| #define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8 |
| #define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16 |
| #define GEN6_PCODE_DATA1 _MMIO(0x13812C) |
| |
| #define GEN6_GT_CORE_STATUS _MMIO(0x138060) |
| #define GEN6_CORE_CPD_STATE_MASK (7<<4) |
| #define GEN6_RCn_MASK 7 |
| #define GEN6_RC0 0 |
| #define GEN6_RC3 2 |
| #define GEN6_RC6 3 |
| #define GEN6_RC7 4 |
| |
| #define GEN8_GT_SLICE_INFO _MMIO(0x138064) |
| #define GEN8_LSLICESTAT_MASK 0x7 |
| |
| #define CHV_POWER_SS0_SIG1 _MMIO(0xa720) |
| #define CHV_POWER_SS1_SIG1 _MMIO(0xa728) |
| #define CHV_SS_PG_ENABLE (1<<1) |
| #define CHV_EU08_PG_ENABLE (1<<9) |
| #define CHV_EU19_PG_ENABLE (1<<17) |
| #define CHV_EU210_PG_ENABLE (1<<25) |
| |
| #define CHV_POWER_SS0_SIG2 _MMIO(0xa724) |
| #define CHV_POWER_SS1_SIG2 _MMIO(0xa72c) |
| #define CHV_EU311_PG_ENABLE (1<<1) |
| |
| #define GEN9_SLICE_PGCTL_ACK(slice) _MMIO(0x804c + (slice)*0x4) |
| #define GEN9_PGCTL_SLICE_ACK (1 << 0) |
| #define GEN9_PGCTL_SS_ACK(subslice) (1 << (2 + (subslice)*2)) |
| |
| #define GEN9_SS01_EU_PGCTL_ACK(slice) _MMIO(0x805c + (slice)*0x8) |
| #define GEN9_SS23_EU_PGCTL_ACK(slice) _MMIO(0x8060 + (slice)*0x8) |
| #define GEN9_PGCTL_SSA_EU08_ACK (1 << 0) |
| #define GEN9_PGCTL_SSA_EU19_ACK (1 << 2) |
| #define GEN9_PGCTL_SSA_EU210_ACK (1 << 4) |
| #define GEN9_PGCTL_SSA_EU311_ACK (1 << 6) |
| #define GEN9_PGCTL_SSB_EU08_ACK (1 << 8) |
| #define GEN9_PGCTL_SSB_EU19_ACK (1 << 10) |
| #define GEN9_PGCTL_SSB_EU210_ACK (1 << 12) |
| #define GEN9_PGCTL_SSB_EU311_ACK (1 << 14) |
| |
| #define GEN7_MISCCPCTL _MMIO(0x9424) |
| #define GEN7_DOP_CLOCK_GATE_ENABLE (1<<0) |
| #define GEN8_DOP_CLOCK_GATE_CFCLK_ENABLE (1<<2) |
| #define GEN8_DOP_CLOCK_GATE_GUC_ENABLE (1<<4) |
| #define GEN8_DOP_CLOCK_GATE_MEDIA_ENABLE (1<<6) |
| |
| #define GEN8_GARBCNTL _MMIO(0xB004) |
| #define GEN9_GAPS_TSV_CREDIT_DISABLE (1<<7) |
| |
| /* IVYBRIDGE DPF */ |
| #define GEN7_L3CDERRST1(slice) _MMIO(0xB008 + (slice) * 0x200) /* L3CD Error Status 1 */ |
| #define GEN7_L3CDERRST1_ROW_MASK (0x7ff<<14) |
| #define GEN7_PARITY_ERROR_VALID (1<<13) |
| #define GEN7_L3CDERRST1_BANK_MASK (3<<11) |
| #define GEN7_L3CDERRST1_SUBBANK_MASK (7<<8) |
| #define GEN7_PARITY_ERROR_ROW(reg) \ |
| ((reg & GEN7_L3CDERRST1_ROW_MASK) >> 14) |
| #define GEN7_PARITY_ERROR_BANK(reg) \ |
| ((reg & GEN7_L3CDERRST1_BANK_MASK) >> 11) |
| #define GEN7_PARITY_ERROR_SUBBANK(reg) \ |
| ((reg & GEN7_L3CDERRST1_SUBBANK_MASK) >> 8) |
| #define GEN7_L3CDERRST1_ENABLE (1<<7) |
| |
| #define GEN7_L3LOG(slice, i) _MMIO(0xB070 + (slice) * 0x200 + (i) * 4) |
| #define GEN7_L3LOG_SIZE 0x80 |
| |
| #define GEN7_HALF_SLICE_CHICKEN1 _MMIO(0xe100) /* IVB GT1 + VLV */ |
| #define GEN7_HALF_SLICE_CHICKEN1_GT2 _MMIO(0xf100) |
| #define GEN7_MAX_PS_THREAD_DEP (8<<12) |
| #define GEN7_SINGLE_SUBSCAN_DISPATCH_ENABLE (1<<10) |
| #define GEN7_SBE_SS_CACHE_DISPATCH_PORT_SHARING_DISABLE (1<<4) |
| #define GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE (1<<3) |
| |
| #define GEN9_HALF_SLICE_CHICKEN5 _MMIO(0xe188) |
| #define GEN9_DG_MIRROR_FIX_ENABLE (1<<5) |
| #define GEN9_CCS_TLB_PREFETCH_ENABLE (1<<3) |
| |
| #define GEN8_ROW_CHICKEN _MMIO(0xe4f0) |
| #define FLOW_CONTROL_ENABLE (1<<15) |
| #define PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE (1<<8) |
| #define STALL_DOP_GATING_DISABLE (1<<5) |
| |
| #define GEN7_ROW_CHICKEN2 _MMIO(0xe4f4) |
| #define GEN7_ROW_CHICKEN2_GT2 _MMIO(0xf4f4) |
| #define DOP_CLOCK_GATING_DISABLE (1<<0) |
| |
| #define HSW_ROW_CHICKEN3 _MMIO(0xe49c) |
| #define HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE (1 << 6) |
| |
| #define HALF_SLICE_CHICKEN2 _MMIO(0xe180) |
| #define GEN8_ST_PO_DISABLE (1<<13) |
| |
| #define HALF_SLICE_CHICKEN3 _MMIO(0xe184) |
| #define HSW_SAMPLE_C_PERFORMANCE (1<<9) |
| #define GEN8_CENTROID_PIXEL_OPT_DIS (1<<8) |
| #define GEN9_DISABLE_OCL_OOB_SUPPRESS_LOGIC (1<<5) |
| #define GEN8_SAMPLER_POWER_BYPASS_DIS (1<<1) |
| |
| #define GEN9_HALF_SLICE_CHICKEN7 _MMIO(0xe194) |
| #define GEN9_ENABLE_YV12_BUGFIX (1<<4) |
| #define GEN9_ENABLE_GPGPU_PREEMPTION (1<<2) |
| |
| /* Audio */ |
| #define G4X_AUD_VID_DID _MMIO(dev_priv->info.display_mmio_offset + 0x62020) |
| #define INTEL_AUDIO_DEVCL 0x808629FB |
| #define INTEL_AUDIO_DEVBLC 0x80862801 |
| #define INTEL_AUDIO_DEVCTG 0x80862802 |
| |
| #define G4X_AUD_CNTL_ST _MMIO(0x620B4) |
| #define G4X_ELDV_DEVCL_DEVBLC (1 << 13) |
| #define G4X_ELDV_DEVCTG (1 << 14) |
| #define G4X_ELD_ADDR_MASK (0xf << 5) |
| #define G4X_ELD_ACK (1 << 4) |
| #define G4X_HDMIW_HDMIEDID _MMIO(0x6210C) |
| |
| #define _IBX_HDMIW_HDMIEDID_A 0xE2050 |
| #define _IBX_HDMIW_HDMIEDID_B 0xE2150 |
| #define IBX_HDMIW_HDMIEDID(pipe) _MMIO_PIPE(pipe, _IBX_HDMIW_HDMIEDID_A, \ |
| _IBX_HDMIW_HDMIEDID_B) |
| #define _IBX_AUD_CNTL_ST_A 0xE20B4 |
| #define _IBX_AUD_CNTL_ST_B 0xE21B4 |
| #define IBX_AUD_CNTL_ST(pipe) _MMIO_PIPE(pipe, _IBX_AUD_CNTL_ST_A, \ |
| _IBX_AUD_CNTL_ST_B) |
| #define IBX_ELD_BUFFER_SIZE_MASK (0x1f << 10) |
| #define IBX_ELD_ADDRESS_MASK (0x1f << 5) |
| #define IBX_ELD_ACK (1 << 4) |
| #define IBX_AUD_CNTL_ST2 _MMIO(0xE20C0) |
| #define IBX_CP_READY(port) ((1 << 1) << (((port) - 1) * 4)) |
| #define IBX_ELD_VALID(port) ((1 << 0) << (((port) - 1) * 4)) |
| |
| #define _CPT_HDMIW_HDMIEDID_A 0xE5050 |
| #define _CPT_HDMIW_HDMIEDID_B 0xE5150 |
| #define CPT_HDMIW_HDMIEDID(pipe) _MMIO_PIPE(pipe, _CPT_HDMIW_HDMIEDID_A, _CPT_HDMIW_HDMIEDID_B) |
| #define _CPT_AUD_CNTL_ST_A 0xE50B4 |
| #define _CPT_AUD_CNTL_ST_B 0xE51B4 |
| #define CPT_AUD_CNTL_ST(pipe) _MMIO_PIPE(pipe, _CPT_AUD_CNTL_ST_A, _CPT_AUD_CNTL_ST_B) |
| #define CPT_AUD_CNTRL_ST2 _MMIO(0xE50C0) |
| |
| #define _VLV_HDMIW_HDMIEDID_A (VLV_DISPLAY_BASE + 0x62050) |
| #define _VLV_HDMIW_HDMIEDID_B (VLV_DISPLAY_BASE + 0x62150) |
| #define VLV_HDMIW_HDMIEDID(pipe) _MMIO_PIPE(pipe, _VLV_HDMIW_HDMIEDID_A, _VLV_HDMIW_HDMIEDID_B) |
| #define _VLV_AUD_CNTL_ST_A (VLV_DISPLAY_BASE + 0x620B4) |
| #define _VLV_AUD_CNTL_ST_B (VLV_DISPLAY_BASE + 0x621B4) |
| #define VLV_AUD_CNTL_ST(pipe) _MMIO_PIPE(pipe, _VLV_AUD_CNTL_ST_A, _VLV_AUD_CNTL_ST_B) |
| #define VLV_AUD_CNTL_ST2 _MMIO(VLV_DISPLAY_BASE + 0x620C0) |
| |
| /* These are the 4 32-bit write offset registers for each stream |
| * output buffer. It determines the offset from the |
| * 3DSTATE_SO_BUFFERs that the next streamed vertex output goes to. |
| */ |
| #define GEN7_SO_WRITE_OFFSET(n) _MMIO(0x5280 + (n) * 4) |
| |
| #define _IBX_AUD_CONFIG_A 0xe2000 |
| #define _IBX_AUD_CONFIG_B 0xe2100 |
| #define IBX_AUD_CFG(pipe) _MMIO_PIPE(pipe, _IBX_AUD_CONFIG_A, _IBX_AUD_CONFIG_B) |
| #define _CPT_AUD_CONFIG_A 0xe5000 |
| #define _CPT_AUD_CONFIG_B 0xe5100 |
| #define CPT_AUD_CFG(pipe) _MMIO_PIPE(pipe, _CPT_AUD_CONFIG_A, _CPT_AUD_CONFIG_B) |
| #define _VLV_AUD_CONFIG_A (VLV_DISPLAY_BASE + 0x62000) |
| #define _VLV_AUD_CONFIG_B (VLV_DISPLAY_BASE + 0x62100) |
| #define VLV_AUD_CFG(pipe) _MMIO_PIPE(pipe, _VLV_AUD_CONFIG_A, _VLV_AUD_CONFIG_B) |
| |
| #define AUD_CONFIG_N_VALUE_INDEX (1 << 29) |
| #define AUD_CONFIG_N_PROG_ENABLE (1 << 28) |
| #define AUD_CONFIG_UPPER_N_SHIFT 20 |
| #define AUD_CONFIG_UPPER_N_MASK (0xff << 20) |
| #define AUD_CONFIG_LOWER_N_SHIFT 4 |
| #define AUD_CONFIG_LOWER_N_MASK (0xfff << 4) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_SHIFT 16 |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK (0xf << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_25175 (0 << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_25200 (1 << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_27000 (2 << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_27027 (3 << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_54000 (4 << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_54054 (5 << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_74176 (6 << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_74250 (7 << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_148352 (8 << 16) |
| #define AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 (9 << 16) |
| #define AUD_CONFIG_DISABLE_NCTS (1 << 3) |
| |
| /* HSW Audio */ |
| #define _HSW_AUD_CONFIG_A 0x65000 |
| #define _HSW_AUD_CONFIG_B 0x65100 |
| #define HSW_AUD_CFG(pipe) _MMIO_PIPE(pipe, _HSW_AUD_CONFIG_A, _HSW_AUD_CONFIG_B) |
| |
| #define _HSW_AUD_MISC_CTRL_A 0x65010 |
| #define _HSW_AUD_MISC_CTRL_B 0x65110 |
| #define HSW_AUD_MISC_CTRL(pipe) _MMIO_PIPE(pipe, _HSW_AUD_MISC_CTRL_A, _HSW_AUD_MISC_CTRL_B) |
| |
| #define _HSW_AUD_DIP_ELD_CTRL_ST_A 0x650b4 |
| #define _HSW_AUD_DIP_ELD_CTRL_ST_B 0x651b4 |
| #define HSW_AUD_DIP_ELD_CTRL(pipe) _MMIO_PIPE(pipe, _HSW_AUD_DIP_ELD_CTRL_ST_A, _HSW_AUD_DIP_ELD_CTRL_ST_B) |
| |
| /* Audio Digital Converter */ |
| #define _HSW_AUD_DIG_CNVT_1 0x65080 |
| #define _HSW_AUD_DIG_CNVT_2 0x65180 |
| #define AUD_DIG_CNVT(pipe) _MMIO_PIPE(pipe, _HSW_AUD_DIG_CNVT_1, _HSW_AUD_DIG_CNVT_2) |
| #define DIP_PORT_SEL_MASK 0x3 |
| |
| #define _HSW_AUD_EDID_DATA_A 0x65050 |
| #define _HSW_AUD_EDID_DATA_B 0x65150 |
| #define HSW_AUD_EDID_DATA(pipe) _MMIO_PIPE(pipe, _HSW_AUD_EDID_DATA_A, _HSW_AUD_EDID_DATA_B) |
| |
| #define HSW_AUD_PIPE_CONV_CFG _MMIO(0x6507c) |
| #define HSW_AUD_PIN_ELD_CP_VLD _MMIO(0x650c0) |
| #define AUDIO_INACTIVE(trans) ((1 << 3) << ((trans) * 4)) |
| #define AUDIO_OUTPUT_ENABLE(trans) ((1 << 2) << ((trans) * 4)) |
| #define AUDIO_CP_READY(trans) ((1 << 1) << ((trans) * 4)) |
| #define AUDIO_ELD_VALID(trans) ((1 << 0) << ((trans) * 4)) |
| |
| #define HSW_AUD_CHICKENBIT _MMIO(0x65f10) |
| #define SKL_AUD_CODEC_WAKE_SIGNAL (1 << 15) |
| |
| /* HSW Power Wells */ |
| #define HSW_PWR_WELL_BIOS _MMIO(0x45400) /* CTL1 */ |
| #define HSW_PWR_WELL_DRIVER _MMIO(0x45404) /* CTL2 */ |
| #define HSW_PWR_WELL_KVMR _MMIO(0x45408) /* CTL3 */ |
| #define HSW_PWR_WELL_DEBUG _MMIO(0x4540C) /* CTL4 */ |
| #define HSW_PWR_WELL_ENABLE_REQUEST (1<<31) |
| #define HSW_PWR_WELL_STATE_ENABLED (1<<30) |
| #define HSW_PWR_WELL_CTL5 _MMIO(0x45410) |
| #define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31) |
| #define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20) |
| #define HSW_PWR_WELL_FORCE_ON (1<<19) |
| #define HSW_PWR_WELL_CTL6 _MMIO(0x45414) |
| |
| /* SKL Fuse Status */ |
| #define SKL_FUSE_STATUS _MMIO(0x42000) |
| #define SKL_FUSE_DOWNLOAD_STATUS (1<<31) |
| #define SKL_FUSE_PG0_DIST_STATUS (1<<27) |
| #define SKL_FUSE_PG1_DIST_STATUS (1<<26) |
| #define SKL_FUSE_PG2_DIST_STATUS (1<<25) |
| |
| /* Per-pipe DDI Function Control */ |
| #define _TRANS_DDI_FUNC_CTL_A 0x60400 |
| #define _TRANS_DDI_FUNC_CTL_B 0x61400 |
| #define _TRANS_DDI_FUNC_CTL_C 0x62400 |
| #define _TRANS_DDI_FUNC_CTL_EDP 0x6F400 |
| #define TRANS_DDI_FUNC_CTL(tran) _MMIO_TRANS2(tran, _TRANS_DDI_FUNC_CTL_A) |
| |
| #define TRANS_DDI_FUNC_ENABLE (1<<31) |
| /* Those bits are ignored by pipe EDP since it can only connect to DDI A */ |
| #define TRANS_DDI_PORT_MASK (7<<28) |
| #define TRANS_DDI_PORT_SHIFT 28 |
| #define TRANS_DDI_SELECT_PORT(x) ((x)<<28) |
| #define TRANS_DDI_PORT_NONE (0<<28) |
| #define TRANS_DDI_MODE_SELECT_MASK (7<<24) |
| #define TRANS_DDI_MODE_SELECT_HDMI (0<<24) |
| #define TRANS_DDI_MODE_SELECT_DVI (1<<24) |
| #define TRANS_DDI_MODE_SELECT_DP_SST (2<<24) |
| #define TRANS_DDI_MODE_SELECT_DP_MST (3<<24) |
| #define TRANS_DDI_MODE_SELECT_FDI (4<<24) |
| #define TRANS_DDI_BPC_MASK (7<<20) |
| #define TRANS_DDI_BPC_8 (0<<20) |
| #define TRANS_DDI_BPC_10 (1<<20) |
| #define TRANS_DDI_BPC_6 (2<<20) |
| #define TRANS_DDI_BPC_12 (3<<20) |
| #define TRANS_DDI_PVSYNC (1<<17) |
| #define TRANS_DDI_PHSYNC (1<<16) |
| #define TRANS_DDI_EDP_INPUT_MASK (7<<12) |
| #define TRANS_DDI_EDP_INPUT_A_ON (0<<12) |
| #define TRANS_DDI_EDP_INPUT_A_ONOFF (4<<12) |
| #define TRANS_DDI_EDP_INPUT_B_ONOFF (5<<12) |
| #define TRANS_DDI_EDP_INPUT_C_ONOFF (6<<12) |
| #define TRANS_DDI_DP_VC_PAYLOAD_ALLOC (1<<8) |
| #define TRANS_DDI_BFI_ENABLE (1<<4) |
| |
| /* DisplayPort Transport Control */ |
| #define _DP_TP_CTL_A 0x64040 |
| #define _DP_TP_CTL_B 0x64140 |
| #define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B) |
| #define DP_TP_CTL_ENABLE (1<<31) |
| #define DP_TP_CTL_MODE_SST (0<<27) |
| #define DP_TP_CTL_MODE_MST (1<<27) |
| #define DP_TP_CTL_FORCE_ACT (1<<25) |
| #define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1<<18) |
| #define DP_TP_CTL_FDI_AUTOTRAIN (1<<15) |
| #define DP_TP_CTL_LINK_TRAIN_MASK (7<<8) |
| #define DP_TP_CTL_LINK_TRAIN_PAT1 (0<<8) |
| #define DP_TP_CTL_LINK_TRAIN_PAT2 (1<<8) |
| #define DP_TP_CTL_LINK_TRAIN_PAT3 (4<<8) |
| #define DP_TP_CTL_LINK_TRAIN_IDLE (2<<8) |
| #define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8) |
| #define DP_TP_CTL_SCRAMBLE_DISABLE (1<<7) |
| |
| /* DisplayPort Transport Status */ |
| #define _DP_TP_STATUS_A 0x64044 |
| #define _DP_TP_STATUS_B 0x64144 |
| #define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, _DP_TP_STATUS_B) |
| #define DP_TP_STATUS_IDLE_DONE (1<<25) |
| #define DP_TP_STATUS_ACT_SENT (1<<24) |
| #define DP_TP_STATUS_MODE_STATUS_MST (1<<23) |
| #define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12) |
| #define DP_TP_STATUS_PAYLOAD_MAPPING_VC2 (3 << 8) |
| #define DP_TP_STATUS_PAYLOAD_MAPPING_VC1 (3 << 4) |
| #define DP_TP_STATUS_PAYLOAD_MAPPING_VC0 (3 << 0) |
| |
| /* DDI Buffer Control */ |
| #define _DDI_BUF_CTL_A 0x64000 |
| #define _DDI_BUF_CTL_B 0x64100 |
| #define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, _DDI_BUF_CTL_B) |
| #define DDI_BUF_CTL_ENABLE (1<<31) |
| #define DDI_BUF_TRANS_SELECT(n) ((n) << 24) |
| #define DDI_BUF_EMP_MASK (0xf<<24) |
| #define DDI_BUF_PORT_REVERSAL (1<<16) |
| #define DDI_BUF_IS_IDLE (1<<7) |
| #define DDI_A_4_LANES (1<<4) |
| #define DDI_PORT_WIDTH(width) (((width) - 1) << 1) |
| #define DDI_PORT_WIDTH_MASK (7 << 1) |
| #define DDI_PORT_WIDTH_SHIFT 1 |
| #define DDI_INIT_DISPLAY_DETECTED (1<<0) |
| |
| /* DDI Buffer Translations */ |
| #define _DDI_BUF_TRANS_A 0x64E00 |
| #define _DDI_BUF_TRANS_B 0x64E60 |
| #define DDI_BUF_TRANS_LO(port, i) _MMIO(_PORT(port, _DDI_BUF_TRANS_A, _DDI_BUF_TRANS_B) + (i) * 8) |
| #define DDI_BUF_TRANS_HI(port, i) _MMIO(_PORT(port, _DDI_BUF_TRANS_A, _DDI_BUF_TRANS_B) + (i) * 8 + 4) |
| |
| /* Sideband Interface (SBI) is programmed indirectly, via |
| * SBI_ADDR, which contains the register offset; and SBI_DATA, |
| * which contains the payload */ |
| #define SBI_ADDR _MMIO(0xC6000) |
| #define SBI_DATA _MMIO(0xC6004) |
| #define SBI_CTL_STAT _MMIO(0xC6008) |
| #define SBI_CTL_DEST_ICLK (0x0<<16) |
| #define SBI_CTL_DEST_MPHY (0x1<<16) |
| #define SBI_CTL_OP_IORD (0x2<<8) |
| #define SBI_CTL_OP_IOWR (0x3<<8) |
| #define SBI_CTL_OP_CRRD (0x6<<8) |
| #define SBI_CTL_OP_CRWR (0x7<<8) |
| #define SBI_RESPONSE_FAIL (0x1<<1) |
| #define SBI_RESPONSE_SUCCESS (0x0<<1) |
| #define SBI_BUSY (0x1<<0) |
| #define SBI_READY (0x0<<0) |
| |
| /* SBI offsets */ |
| #define SBI_SSCDIVINTPHASE 0x0200 |
| #define SBI_SSCDIVINTPHASE6 0x0600 |
| #define SBI_SSCDIVINTPHASE_DIVSEL_SHIFT 1 |
| #define SBI_SSCDIVINTPHASE_DIVSEL_MASK (0x7f<<1) |
| #define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1) |
| #define SBI_SSCDIVINTPHASE_INCVAL_SHIFT 8 |
| #define SBI_SSCDIVINTPHASE_INCVAL_MASK (0x7f<<8) |
| #define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8) |
| #define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15) |
| #define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0) |
| #define SBI_SSCDITHPHASE 0x0204 |
| #define SBI_SSCCTL 0x020c |
| #define SBI_SSCCTL6 0x060C |
| #define SBI_SSCCTL_PATHALT (1<<3) |
| #define SBI_SSCCTL_DISABLE (1<<0) |
| #define SBI_SSCAUXDIV6 0x0610 |
| #define SBI_SSCAUXDIV_FINALDIV2SEL_SHIFT 4 |
| #define SBI_SSCAUXDIV_FINALDIV2SEL_MASK (1<<4) |
| #define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4) |
| #define SBI_DBUFF0 0x2a00 |
| #define SBI_GEN0 0x1f00 |
| #define SBI_GEN0_CFG_BUFFENABLE_DISABLE (1<<0) |
| |
| /* LPT PIXCLK_GATE */ |
| #define PIXCLK_GATE _MMIO(0xC6020) |
| #define PIXCLK_GATE_UNGATE (1<<0) |
| #define PIXCLK_GATE_GATE (0<<0) |
| |
| /* SPLL */ |
| #define SPLL_CTL _MMIO(0x46020) |
| #define SPLL_PLL_ENABLE (1<<31) |
| #define SPLL_PLL_SSC (1<<28) |
| #define SPLL_PLL_NON_SSC (2<<28) |
| #define SPLL_PLL_LCPLL (3<<28) |
| #define SPLL_PLL_REF_MASK (3<<28) |
| #define SPLL_PLL_FREQ_810MHz (0<<26) |
| #define SPLL_PLL_FREQ_1350MHz (1<<26) |
| #define SPLL_PLL_FREQ_2700MHz (2<<26) |
| #define SPLL_PLL_FREQ_MASK (3<<26) |
| |
| /* WRPLL */ |
| #define _WRPLL_CTL1 0x46040 |
| #define _WRPLL_CTL2 0x46060 |
| #define WRPLL_CTL(pll) _MMIO_PIPE(pll, _WRPLL_CTL1, _WRPLL_CTL2) |
| #define WRPLL_PLL_ENABLE (1<<31) |
| #define WRPLL_PLL_SSC (1<<28) |
| #define WRPLL_PLL_NON_SSC (2<<28) |
| #define WRPLL_PLL_LCPLL (3<<28) |
| #define WRPLL_PLL_REF_MASK (3<<28) |
| /* WRPLL divider programming */ |
| #define WRPLL_DIVIDER_REFERENCE(x) ((x)<<0) |
| #define WRPLL_DIVIDER_REF_MASK (0xff) |
| #define WRPLL_DIVIDER_POST(x) ((x)<<8) |
| #define WRPLL_DIVIDER_POST_MASK (0x3f<<8) |
| #define WRPLL_DIVIDER_POST_SHIFT 8 |
| #define WRPLL_DIVIDER_FEEDBACK(x) ((x)<<16) |
| #define WRPLL_DIVIDER_FB_SHIFT 16 |
| #define WRPLL_DIVIDER_FB_MASK (0xff<<16) |
| |
| /* Port clock selection */ |
| #define _PORT_CLK_SEL_A 0x46100 |
| #define _PORT_CLK_SEL_B 0x46104 |
| #define PORT_CLK_SEL(port) _MMIO_PORT(port, _PORT_CLK_SEL_A, _PORT_CLK_SEL_B) |
| #define PORT_CLK_SEL_LCPLL_2700 (0<<29) |
| #define PORT_CLK_SEL_LCPLL_1350 (1<<29) |
| #define PORT_CLK_SEL_LCPLL_810 (2<<29) |
| #define PORT_CLK_SEL_SPLL (3<<29) |
| #define PORT_CLK_SEL_WRPLL(pll) (((pll)+4)<<29) |
| #define PORT_CLK_SEL_WRPLL1 (4<<29) |
| #define PORT_CLK_SEL_WRPLL2 (5<<29) |
| #define PORT_CLK_SEL_NONE (7<<29) |
| #define PORT_CLK_SEL_MASK (7<<29) |
| |
| /* Transcoder clock selection */ |
| #define _TRANS_CLK_SEL_A 0x46140 |
| #define _TRANS_CLK_SEL_B 0x46144 |
| #define TRANS_CLK_SEL(tran) _MMIO_TRANS(tran, _TRANS_CLK_SEL_A, _TRANS_CLK_SEL_B) |
| /* For each transcoder, we need to select the corresponding port clock */ |
| #define TRANS_CLK_SEL_DISABLED (0x0<<29) |
| #define TRANS_CLK_SEL_PORT(x) (((x)+1)<<29) |
| |
| #define CDCLK_FREQ _MMIO(0x46200) |
| |
| #define _TRANSA_MSA_MISC 0x60410 |
| #define _TRANSB_MSA_MISC 0x61410 |
| #define _TRANSC_MSA_MISC 0x62410 |
| #define _TRANS_EDP_MSA_MISC 0x6f410 |
| #define TRANS_MSA_MISC(tran) _MMIO_TRANS2(tran, _TRANSA_MSA_MISC) |
| |
| #define TRANS_MSA_SYNC_CLK (1<<0) |
| #define TRANS_MSA_6_BPC (0<<5) |
| #define TRANS_MSA_8_BPC (1<<5) |
| #define TRANS_MSA_10_BPC (2<<5) |
| #define TRANS_MSA_12_BPC (3<<5) |
| #define TRANS_MSA_16_BPC (4<<5) |
| |
| /* LCPLL Control */ |
| #define LCPLL_CTL _MMIO(0x130040) |
| #define LCPLL_PLL_DISABLE (1<<31) |
| #define LCPLL_PLL_LOCK (1<<30) |
| #define LCPLL_CLK_FREQ_MASK (3<<26) |
| #define LCPLL_CLK_FREQ_450 (0<<26) |
| #define LCPLL_CLK_FREQ_54O_BDW (1<<26) |
| #define LCPLL_CLK_FREQ_337_5_BDW (2<<26) |
| #define LCPLL_CLK_FREQ_675_BDW (3<<26) |
| #define LCPLL_CD_CLOCK_DISABLE (1<<25) |
| #define LCPLL_ROOT_CD_CLOCK_DISABLE (1<<24) |
| #define LCPLL_CD2X_CLOCK_DISABLE (1<<23) |
| #define LCPLL_POWER_DOWN_ALLOW (1<<22) |
| #define LCPLL_CD_SOURCE_FCLK (1<<21) |
| #define LCPLL_CD_SOURCE_FCLK_DONE (1<<19) |
| |
| /* |
| * SKL Clocks |
| */ |
| |
| /* CDCLK_CTL */ |
| #define CDCLK_CTL _MMIO(0x46000) |
| #define CDCLK_FREQ_SEL_MASK (3<<26) |
| #define CDCLK_FREQ_450_432 (0<<26) |
| #define CDCLK_FREQ_540 (1<<26) |
| #define CDCLK_FREQ_337_308 (2<<26) |
| #define CDCLK_FREQ_675_617 (3<<26) |
| #define BXT_CDCLK_CD2X_DIV_SEL_MASK (3<<22) |
| #define BXT_CDCLK_CD2X_DIV_SEL_1 (0<<22) |
| #define BXT_CDCLK_CD2X_DIV_SEL_1_5 (1<<22) |
| #define BXT_CDCLK_CD2X_DIV_SEL_2 (2<<22) |
| #define BXT_CDCLK_CD2X_DIV_SEL_4 (3<<22) |
| #define BXT_CDCLK_CD2X_PIPE(pipe) ((pipe)<<20) |
| #define BXT_CDCLK_CD2X_PIPE_NONE BXT_CDCLK_CD2X_PIPE(3) |
| #define BXT_CDCLK_SSA_PRECHARGE_ENABLE (1<<16) |
| #define CDCLK_FREQ_DECIMAL_MASK (0x7ff) |
| |
| /* LCPLL_CTL */ |
| #define LCPLL1_CTL _MMIO(0x46010) |
| #define LCPLL2_CTL _MMIO(0x46014) |
| #define LCPLL_PLL_ENABLE (1<<31) |
| |
| /* DPLL control1 */ |
| #define DPLL_CTRL1 _MMIO(0x6C058) |
| #define DPLL_CTRL1_HDMI_MODE(id) (1<<((id)*6+5)) |
| #define DPLL_CTRL1_SSC(id) (1<<((id)*6+4)) |
| #define DPLL_CTRL1_LINK_RATE_MASK(id) (7<<((id)*6+1)) |
| #define DPLL_CTRL1_LINK_RATE_SHIFT(id) ((id)*6+1) |
| #define DPLL_CTRL1_LINK_RATE(linkrate, id) ((linkrate)<<((id)*6+1)) |
| #define DPLL_CTRL1_OVERRIDE(id) (1<<((id)*6)) |
| #define DPLL_CTRL1_LINK_RATE_2700 0 |
| #define DPLL_CTRL1_LINK_RATE_1350 1 |
| #define DPLL_CTRL1_LINK_RATE_810 2 |
| #define DPLL_CTRL1_LINK_RATE_1620 3 |
| #define DPLL_CTRL1_LINK_RATE_1080 4 |
| #define DPLL_CTRL1_LINK_RATE_2160 5 |
| |
| /* DPLL control2 */ |
| #define DPLL_CTRL2 _MMIO(0x6C05C) |
| #define DPLL_CTRL2_DDI_CLK_OFF(port) (1<<((port)+15)) |
| #define DPLL_CTRL2_DDI_CLK_SEL_MASK(port) (3<<((port)*3+1)) |
| #define DPLL_CTRL2_DDI_CLK_SEL_SHIFT(port) ((port)*3+1) |
| #define DPLL_CTRL2_DDI_CLK_SEL(clk, port) ((clk)<<((port)*3+1)) |
| #define DPLL_CTRL2_DDI_SEL_OVERRIDE(port) (1<<((port)*3)) |
| |
| /* DPLL Status */ |
| #define DPLL_STATUS _MMIO(0x6C060) |
| #define DPLL_LOCK(id) (1<<((id)*8)) |
| |
| /* DPLL cfg */ |
| #define _DPLL1_CFGCR1 0x6C040 |
| #define _DPLL2_CFGCR1 0x6C048 |
| #define _DPLL3_CFGCR1 0x6C050 |
| #define DPLL_CFGCR1_FREQ_ENABLE (1<<31) |
| #define DPLL_CFGCR1_DCO_FRACTION_MASK (0x7fff<<9) |
| #define DPLL_CFGCR1_DCO_FRACTION(x) ((x)<<9) |
| #define DPLL_CFGCR1_DCO_INTEGER_MASK (0x1ff) |
| |
| #define _DPLL1_CFGCR2 0x6C044 |
| #define _DPLL2_CFGCR2 0x6C04C |
| #define _DPLL3_CFGCR2 0x6C054 |
| #define DPLL_CFGCR2_QDIV_RATIO_MASK (0xff<<8) |
| #define DPLL_CFGCR2_QDIV_RATIO(x) ((x)<<8) |
| #define DPLL_CFGCR2_QDIV_MODE(x) ((x)<<7) |
| #define DPLL_CFGCR2_KDIV_MASK (3<<5) |
| #define DPLL_CFGCR2_KDIV(x) ((x)<<5) |
| #define DPLL_CFGCR2_KDIV_5 (0<<5) |
| #define DPLL_CFGCR2_KDIV_2 (1<<5) |
| #define DPLL_CFGCR2_KDIV_3 (2<<5) |
| #define DPLL_CFGCR2_KDIV_1 (3<<5) |
| #define DPLL_CFGCR2_PDIV_MASK (7<<2) |
| #define DPLL_CFGCR2_PDIV(x) ((x)<<2) |
| #define DPLL_CFGCR2_PDIV_1 (0<<2) |
| #define DPLL_CFGCR2_PDIV_2 (1<<2) |
| #define DPLL_CFGCR2_PDIV_3 (2<<2) |
| #define DPLL_CFGCR2_PDIV_7 (4<<2) |
| #define DPLL_CFGCR2_CENTRAL_FREQ_MASK (3) |
| |
| #define DPLL_CFGCR1(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR1, _DPLL2_CFGCR1) |
| #define DPLL_CFGCR2(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR2, _DPLL2_CFGCR2) |
| |
| /* BXT display engine PLL */ |
| #define BXT_DE_PLL_CTL _MMIO(0x6d000) |
| #define BXT_DE_PLL_RATIO(x) (x) /* {60,65,100} * 19.2MHz */ |
| #define BXT_DE_PLL_RATIO_MASK 0xff |
| |
| #define BXT_DE_PLL_ENABLE _MMIO(0x46070) |
| #define BXT_DE_PLL_PLL_ENABLE (1 << 31) |
| #define BXT_DE_PLL_LOCK (1 << 30) |
| |
| /* GEN9 DC */ |
| #define DC_STATE_EN _MMIO(0x45504) |
| #define DC_STATE_DISABLE 0 |
| #define DC_STATE_EN_UPTO_DC5 (1<<0) |
| #define DC_STATE_EN_DC9 (1<<3) |
| #define DC_STATE_EN_UPTO_DC6 (2<<0) |
| #define DC_STATE_EN_UPTO_DC5_DC6_MASK 0x3 |
| |
| #define DC_STATE_DEBUG _MMIO(0x45520) |
| #define DC_STATE_DEBUG_MASK_CORES (1<<0) |
| #define DC_STATE_DEBUG_MASK_MEMORY_UP (1<<1) |
| |
| /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register, |
| * since on HSW we can't write to it using I915_WRITE. */ |
| #define D_COMP_HSW _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C) |
| #define D_COMP_BDW _MMIO(0x138144) |
| #define D_COMP_RCOMP_IN_PROGRESS (1<<9) |
| #define D_COMP_COMP_FORCE (1<<8) |
| #define D_COMP_COMP_DISABLE (1<<0) |
| |
| /* Pipe WM_LINETIME - watermark line time */ |
| #define _PIPE_WM_LINETIME_A 0x45270 |
| #define _PIPE_WM_LINETIME_B 0x45274 |
| #define PIPE_WM_LINETIME(pipe) _MMIO_PIPE(pipe, _PIPE_WM_LINETIME_A, _PIPE_WM_LINETIME_B) |
| #define PIPE_WM_LINETIME_MASK (0x1ff) |
| #define PIPE_WM_LINETIME_TIME(x) ((x)) |
| #define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16) |
| #define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16) |
| |
| /* SFUSE_STRAP */ |
| #define SFUSE_STRAP _MMIO(0xc2014) |
| #define SFUSE_STRAP_FUSE_LOCK (1<<13) |
| #define SFUSE_STRAP_DISPLAY_DISABLED (1<<7) |
| #define SFUSE_STRAP_CRT_DISABLED (1<<6) |
| #define SFUSE_STRAP_DDIB_DETECTED (1<<2) |
| #define SFUSE_STRAP_DDIC_DETECTED (1<<1) |
| #define SFUSE_STRAP_DDID_DETECTED (1<<0) |
| |
| #define WM_MISC _MMIO(0x45260) |
| #define WM_MISC_DATA_PARTITION_5_6 (1 << 0) |
| |
| #define WM_DBG _MMIO(0x45280) |
| #define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0) |
| #define WM_DBG_DISALLOW_MAXFIFO (1<<1) |
| #define WM_DBG_DISALLOW_SPRITE (1<<2) |
| |
| /* pipe CSC */ |
| #define _PIPE_A_CSC_COEFF_RY_GY 0x49010 |
| #define _PIPE_A_CSC_COEFF_BY 0x49014 |
| #define _PIPE_A_CSC_COEFF_RU_GU 0x49018 |
| #define _PIPE_A_CSC_COEFF_BU 0x4901c |
| #define _PIPE_A_CSC_COEFF_RV_GV 0x49020 |
| #define _PIPE_A_CSC_COEFF_BV 0x49024 |
| #define _PIPE_A_CSC_MODE 0x49028 |
| #define CSC_BLACK_SCREEN_OFFSET (1 << 2) |
| #define CSC_POSITION_BEFORE_GAMMA (1 << 1) |
| #define CSC_MODE_YUV_TO_RGB (1 << 0) |
| #define _PIPE_A_CSC_PREOFF_HI 0x49030 |
| #define _PIPE_A_CSC_PREOFF_ME 0x49034 |
| #define _PIPE_A_CSC_PREOFF_LO 0x49038 |
| #define _PIPE_A_CSC_POSTOFF_HI 0x49040 |
| #define _PIPE_A_CSC_POSTOFF_ME 0x49044 |
| #define _PIPE_A_CSC_POSTOFF_LO 0x49048 |
| |
| #define _PIPE_B_CSC_COEFF_RY_GY 0x49110 |
| #define _PIPE_B_CSC_COEFF_BY 0x49114 |
| #define _PIPE_B_CSC_COEFF_RU_GU 0x49118 |
| #define _PIPE_B_CSC_COEFF_BU 0x4911c |
| #define _PIPE_B_CSC_COEFF_RV_GV 0x49120 |
| #define _PIPE_B_CSC_COEFF_BV 0x49124 |
| #define _PIPE_B_CSC_MODE 0x49128 |
| #define _PIPE_B_CSC_PREOFF_HI 0x49130 |
| #define _PIPE_B_CSC_PREOFF_ME 0x49134 |
| #define _PIPE_B_CSC_PREOFF_LO 0x49138 |
| #define _PIPE_B_CSC_POSTOFF_HI 0x49140 |
| #define _PIPE_B_CSC_POSTOFF_ME 0x49144 |
| #define _PIPE_B_CSC_POSTOFF_LO 0x49148 |
| |
| #define PIPE_CSC_COEFF_RY_GY(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_COEFF_RY_GY, _PIPE_B_CSC_COEFF_RY_GY) |
| #define PIPE_CSC_COEFF_BY(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_COEFF_BY, _PIPE_B_CSC_COEFF_BY) |
| #define PIPE_CSC_COEFF_RU_GU(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_COEFF_RU_GU, _PIPE_B_CSC_COEFF_RU_GU) |
| #define PIPE_CSC_COEFF_BU(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_COEFF_BU, _PIPE_B_CSC_COEFF_BU) |
| #define PIPE_CSC_COEFF_RV_GV(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_COEFF_RV_GV, _PIPE_B_CSC_COEFF_RV_GV) |
| #define PIPE_CSC_COEFF_BV(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_COEFF_BV, _PIPE_B_CSC_COEFF_BV) |
| #define PIPE_CSC_MODE(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_MODE, _PIPE_B_CSC_MODE) |
| #define PIPE_CSC_PREOFF_HI(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_PREOFF_HI, _PIPE_B_CSC_PREOFF_HI) |
| #define PIPE_CSC_PREOFF_ME(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_PREOFF_ME, _PIPE_B_CSC_PREOFF_ME) |
| #define PIPE_CSC_PREOFF_LO(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_PREOFF_LO, _PIPE_B_CSC_PREOFF_LO) |
| #define PIPE_CSC_POSTOFF_HI(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_POSTOFF_HI, _PIPE_B_CSC_POSTOFF_HI) |
| #define PIPE_CSC_POSTOFF_ME(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_POSTOFF_ME, _PIPE_B_CSC_POSTOFF_ME) |
| #define PIPE_CSC_POSTOFF_LO(pipe) _MMIO_PIPE(pipe, _PIPE_A_CSC_POSTOFF_LO, _PIPE_B_CSC_POSTOFF_LO) |
| |
| /* pipe degamma/gamma LUTs on IVB+ */ |
| #define _PAL_PREC_INDEX_A 0x4A400 |
| #define _PAL_PREC_INDEX_B 0x4AC00 |
| #define _PAL_PREC_INDEX_C 0x4B400 |
| #define PAL_PREC_10_12_BIT (0 << 31) |
| #define PAL_PREC_SPLIT_MODE (1 << 31) |
| #define PAL_PREC_AUTO_INCREMENT (1 << 15) |
| #define _PAL_PREC_DATA_A 0x4A404 |
| #define _PAL_PREC_DATA_B 0x4AC04 |
| #define _PAL_PREC_DATA_C 0x4B404 |
| #define _PAL_PREC_GC_MAX_A 0x4A410 |
| #define _PAL_PREC_GC_MAX_B 0x4AC10 |
| #define _PAL_PREC_GC_MAX_C 0x4B410 |
| #define _PAL_PREC_EXT_GC_MAX_A 0x4A420 |
| #define _PAL_PREC_EXT_GC_MAX_B 0x4AC20 |
| #define _PAL_PREC_EXT_GC_MAX_C 0x4B420 |
| |
| #define PREC_PAL_INDEX(pipe) _MMIO_PIPE(pipe, _PAL_PREC_INDEX_A, _PAL_PREC_INDEX_B) |
| #define PREC_PAL_DATA(pipe) _MMIO_PIPE(pipe, _PAL_PREC_DATA_A, _PAL_PREC_DATA_B) |
| #define PREC_PAL_GC_MAX(pipe, i) _MMIO(_PIPE(pipe, _PAL_PREC_GC_MAX_A, _PAL_PREC_GC_MAX_B) + (i) * 4) |
| #define PREC_PAL_EXT_GC_MAX(pipe, i) _MMIO(_PIPE(pipe, _PAL_PREC_EXT_GC_MAX_A, _PAL_PREC_EXT_GC_MAX_B) + (i) * 4) |
| |
| /* pipe CSC & degamma/gamma LUTs on CHV */ |
| #define _CGM_PIPE_A_CSC_COEFF01 (VLV_DISPLAY_BASE + 0x67900) |
| #define _CGM_PIPE_A_CSC_COEFF23 (VLV_DISPLAY_BASE + 0x67904) |
| #define _CGM_PIPE_A_CSC_COEFF45 (VLV_DISPLAY_BASE + 0x67908) |
| #define _CGM_PIPE_A_CSC_COEFF67 (VLV_DISPLAY_BASE + 0x6790C) |
| #define _CGM_PIPE_A_CSC_COEFF8 (VLV_DISPLAY_BASE + 0x67910) |
| #define _CGM_PIPE_A_DEGAMMA (VLV_DISPLAY_BASE + 0x66000) |
| #define _CGM_PIPE_A_GAMMA (VLV_DISPLAY_BASE + 0x67000) |
| #define _CGM_PIPE_A_MODE (VLV_DISPLAY_BASE + 0x67A00) |
| #define CGM_PIPE_MODE_GAMMA (1 << 2) |
| #define CGM_PIPE_MODE_CSC (1 << 1) |
| #define CGM_PIPE_MODE_DEGAMMA (1 << 0) |
| |
| #define _CGM_PIPE_B_CSC_COEFF01 (VLV_DISPLAY_BASE + 0x69900) |
| #define _CGM_PIPE_B_CSC_COEFF23 (VLV_DISPLAY_BASE + 0x69904) |
| #define _CGM_PIPE_B_CSC_COEFF45 (VLV_DISPLAY_BASE + 0x69908) |
| #define _CGM_PIPE_B_CSC_COEFF67 (VLV_DISPLAY_BASE + 0x6990C) |
| #define _CGM_PIPE_B_CSC_COEFF8 (VLV_DISPLAY_BASE + 0x69910) |
| #define _CGM_PIPE_B_DEGAMMA (VLV_DISPLAY_BASE + 0x68000) |
| #define _CGM_PIPE_B_GAMMA (VLV_DISPLAY_BASE + 0x69000) |
| #define _CGM_PIPE_B_MODE (VLV_DISPLAY_BASE + 0x69A00) |
| |
| #define CGM_PIPE_CSC_COEFF01(pipe) _MMIO_PIPE(pipe, _CGM_PIPE_A_CSC_COEFF01, _CGM_PIPE_B_CSC_COEFF01) |
| #define CGM_PIPE_CSC_COEFF23(pipe) _MMIO_PIPE(pipe, _CGM_PIPE_A_CSC_COEFF23, _CGM_PIPE_B_CSC_COEFF23) |
| #define CGM_PIPE_CSC_COEFF45(pipe) _MMIO_PIPE(pipe, _CGM_PIPE_A_CSC_COEFF45, _CGM_PIPE_B_CSC_COEFF45) |
| #define CGM_PIPE_CSC_COEFF67(pipe) _MMIO_PIPE(pipe, _CGM_PIPE_A_CSC_COEFF67, _CGM_PIPE_B_CSC_COEFF67) |
| #define CGM_PIPE_CSC_COEFF8(pipe) _MMIO_PIPE(pipe, _CGM_PIPE_A_CSC_COEFF8, _CGM_PIPE_B_CSC_COEFF8) |
| #define CGM_PIPE_DEGAMMA(pipe, i, w) _MMIO(_PIPE(pipe, _CGM_PIPE_A_DEGAMMA, _CGM_PIPE_B_DEGAMMA) + (i) * 8 + (w) * 4) |
| #define CGM_PIPE_GAMMA(pipe, i, w) _MMIO(_PIPE(pipe, _CGM_PIPE_A_GAMMA, _CGM_PIPE_B_GAMMA) + (i) * 8 + (w) * 4) |
| #define CGM_PIPE_MODE(pipe) _MMIO_PIPE(pipe, _CGM_PIPE_A_MODE, _CGM_PIPE_B_MODE) |
| |
| /* MIPI DSI registers */ |
| |
| #define _MIPI_PORT(port, a, c) _PORT3(port, a, 0, c) /* ports A and C only */ |
| #define _MMIO_MIPI(port, a, c) _MMIO(_MIPI_PORT(port, a, c)) |
| |
| /* BXT MIPI clock controls */ |
| #define BXT_MAX_VAR_OUTPUT_KHZ 39500 |
| |
| #define BXT_MIPI_CLOCK_CTL _MMIO(0x46090) |
| #define BXT_MIPI1_DIV_SHIFT 26 |
| #define BXT_MIPI2_DIV_SHIFT 10 |
| #define BXT_MIPI_DIV_SHIFT(port) \ |
| _MIPI_PORT(port, BXT_MIPI1_DIV_SHIFT, \ |
| BXT_MIPI2_DIV_SHIFT) |
| |
| /* TX control divider to select actual TX clock output from (8x/var) */ |
| #define BXT_MIPI1_TX_ESCLK_SHIFT 26 |
| #define BXT_MIPI2_TX_ESCLK_SHIFT 10 |
| #define BXT_MIPI_TX_ESCLK_SHIFT(port) \ |
| _MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_SHIFT, \ |
| BXT_MIPI2_TX_ESCLK_SHIFT) |
| #define BXT_MIPI1_TX_ESCLK_FIXDIV_MASK (0x3F << 26) |
| #define BXT_MIPI2_TX_ESCLK_FIXDIV_MASK (0x3F << 10) |
| #define BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port) \ |
| _MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_FIXDIV_MASK, \ |
| BXT_MIPI2_TX_ESCLK_FIXDIV_MASK) |
| #define BXT_MIPI_TX_ESCLK_DIVIDER(port, val) \ |
| ((val & 0x3F) << BXT_MIPI_TX_ESCLK_SHIFT(port)) |
| /* RX upper control divider to select actual RX clock output from 8x */ |
| #define BXT_MIPI1_RX_ESCLK_UPPER_SHIFT 21 |
| #define BXT_MIPI2_RX_ESCLK_UPPER_SHIFT 5 |
| #define BXT_MIPI_RX_ESCLK_UPPER_SHIFT(port) \ |
| _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_UPPER_SHIFT, \ |
| BXT_MIPI2_RX_ESCLK_UPPER_SHIFT) |
| #define BXT_MIPI1_RX_ESCLK_UPPER_FIXDIV_MASK (3 << 21) |
| #define BXT_MIPI2_RX_ESCLK_UPPER_FIXDIV_MASK (3 << 5) |
| #define BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port) \ |
| _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_UPPER_FIXDIV_MASK, \ |
| BXT_MIPI2_RX_ESCLK_UPPER_FIXDIV_MASK) |
| #define BXT_MIPI_RX_ESCLK_UPPER_DIVIDER(port, val) \ |
| ((val & 3) << BXT_MIPI_RX_ESCLK_UPPER_SHIFT(port)) |
| /* 8/3X divider to select the actual 8/3X clock output from 8x */ |
| #define BXT_MIPI1_8X_BY3_SHIFT 19 |
| #define BXT_MIPI2_8X_BY3_SHIFT 3 |
| #define BXT_MIPI_8X_BY3_SHIFT(port) \ |
| _MIPI_PORT(port, BXT_MIPI1_8X_BY3_SHIFT, \ |
| BXT_MIPI2_8X_BY3_SHIFT) |
| #define BXT_MIPI1_8X_BY3_DIVIDER_MASK (3 << 19) |
| #define BXT_MIPI2_8X_BY3_DIVIDER_MASK (3 << 3) |
| #define BXT_MIPI_8X_BY3_DIVIDER_MASK(port) \ |
| _MIPI_PORT(port, BXT_MIPI1_8X_BY3_DIVIDER_MASK, \ |
| BXT_MIPI2_8X_BY3_DIVIDER_MASK) |
| #define BXT_MIPI_8X_BY3_DIVIDER(port, val) \ |
| ((val & 3) << BXT_MIPI_8X_BY3_SHIFT(port)) |
| /* RX lower control divider to select actual RX clock output from 8x */ |
| #define BXT_MIPI1_RX_ESCLK_LOWER_SHIFT 16 |
| #define BXT_MIPI2_RX_ESCLK_LOWER_SHIFT 0 |
| #define BXT_MIPI_RX_ESCLK_LOWER_SHIFT(port) \ |
| _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_LOWER_SHIFT, \ |
| BXT_MIPI2_RX_ESCLK_LOWER_SHIFT) |
| #define BXT_MIPI1_RX_ESCLK_LOWER_FIXDIV_MASK (3 << 16) |
| #define BXT_MIPI2_RX_ESCLK_LOWER_FIXDIV_MASK (3 << 0) |
| #define BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port) \ |
| _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_LOWER_FIXDIV_MASK, \ |
| BXT_MIPI2_RX_ESCLK_LOWER_FIXDIV_MASK) |
| #define BXT_MIPI_RX_ESCLK_LOWER_DIVIDER(port, val) \ |
| ((val & 3) << BXT_MIPI_RX_ESCLK_LOWER_SHIFT(port)) |
| |
| #define RX_DIVIDER_BIT_1_2 0x3 |
| #define RX_DIVIDER_BIT_3_4 0xC |
| |
| /* BXT MIPI mode configure */ |
| #define _BXT_MIPIA_TRANS_HACTIVE 0x6B0F8 |
| #define _BXT_MIPIC_TRANS_HACTIVE 0x6B8F8 |
| #define BXT_MIPI_TRANS_HACTIVE(tc) _MMIO_MIPI(tc, \ |
| _BXT_MIPIA_TRANS_HACTIVE, _BXT_MIPIC_TRANS_HACTIVE) |
| |
| #define _BXT_MIPIA_TRANS_VACTIVE 0x6B0FC |
| #define _BXT_MIPIC_TRANS_VACTIVE 0x6B8FC |
| #define BXT_MIPI_TRANS_VACTIVE(tc) _MMIO_MIPI(tc, \ |
| _BXT_MIPIA_TRANS_VACTIVE, _BXT_MIPIC_TRANS_VACTIVE) |
| |
| #define _BXT_MIPIA_TRANS_VTOTAL 0x6B100 |
| #define _BXT_MIPIC_TRANS_VTOTAL 0x6B900 |
| #define BXT_MIPI_TRANS_VTOTAL(tc) _MMIO_MIPI(tc, \ |
| _BXT_MIPIA_TRANS_VTOTAL, _BXT_MIPIC_TRANS_VTOTAL) |
| |
| #define BXT_DSI_PLL_CTL _MMIO(0x161000) |
| #define BXT_DSI_PLL_PVD_RATIO_SHIFT 16 |
| #define BXT_DSI_PLL_PVD_RATIO_MASK (3 << BXT_DSI_PLL_PVD_RATIO_SHIFT) |
| #define BXT_DSI_PLL_PVD_RATIO_1 (1 << BXT_DSI_PLL_PVD_RATIO_SHIFT) |
| #define BXT_DSIC_16X_BY2 (1 << 10) |
| #define BXT_DSIC_16X_BY3 (2 << 10) |
| #define BXT_DSIC_16X_BY4 (3 << 10) |
| #define BXT_DSIC_16X_MASK (3 << 10) |
| #define BXT_DSIA_16X_BY2 (1 << 8) |
| #define BXT_DSIA_16X_BY3 (2 << 8) |
| #define BXT_DSIA_16X_BY4 (3 << 8) |
| #define BXT_DSIA_16X_MASK (3 << 8) |
| #define BXT_DSI_FREQ_SEL_SHIFT 8 |
| #define BXT_DSI_FREQ_SEL_MASK (0xF << BXT_DSI_FREQ_SEL_SHIFT) |
| |
| #define BXT_DSI_PLL_RATIO_MAX 0x7D |
| #define BXT_DSI_PLL_RATIO_MIN 0x22 |
| #define BXT_DSI_PLL_RATIO_MASK 0xFF |
| #define BXT_REF_CLOCK_KHZ 19200 |
| |
| #define BXT_DSI_PLL_ENABLE _MMIO(0x46080) |
| #define BXT_DSI_PLL_DO_ENABLE (1 << 31) |
| #define BXT_DSI_PLL_LOCKED (1 << 30) |
| |
| #define _MIPIA_PORT_CTRL (VLV_DISPLAY_BASE + 0x61190) |
| #define _MIPIC_PORT_CTRL (VLV_DISPLAY_BASE + 0x61700) |
| #define MIPI_PORT_CTRL(port) _MMIO_MIPI(port, _MIPIA_PORT_CTRL, _MIPIC_PORT_CTRL) |
| |
| /* BXT port control */ |
| #define _BXT_MIPIA_PORT_CTRL 0x6B0C0 |
| #define _BXT_MIPIC_PORT_CTRL 0x6B8C0 |
| #define BXT_MIPI_PORT_CTRL(tc) _MMIO_MIPI(tc, _BXT_MIPIA_PORT_CTRL, _BXT_MIPIC_PORT_CTRL) |
| |
| #define DPI_ENABLE (1 << 31) /* A + C */ |
| #define MIPIA_MIPI4DPHY_DELAY_COUNT_SHIFT 27 |
| #define MIPIA_MIPI4DPHY_DELAY_COUNT_MASK (0xf << 27) |
| #define DUAL_LINK_MODE_SHIFT 26 |
| #define DUAL_LINK_MODE_MASK (1 << 26) |
| #define DUAL_LINK_MODE_FRONT_BACK (0 << 26) |
| #define DUAL_LINK_MODE_PIXEL_ALTERNATIVE (1 << 26) |
| #define DITHERING_ENABLE (1 << 25) /* A + C */ |
| #define FLOPPED_HSTX (1 << 23) |
| #define DE_INVERT (1 << 19) /* XXX */ |
| #define MIPIA_FLISDSI_DELAY_COUNT_SHIFT 18 |
| #define MIPIA_FLISDSI_DELAY_COUNT_MASK (0xf << 18) |
| #define AFE_LATCHOUT (1 << 17) |
| #define LP_OUTPUT_HOLD (1 << 16) |
| #define MIPIC_FLISDSI_DELAY_COUNT_HIGH_SHIFT 15 |
| #define MIPIC_FLISDSI_DELAY_COUNT_HIGH_MASK (1 << 15) |
| #define MIPIC_MIPI4DPHY_DELAY_COUNT_SHIFT 11 |
| #define MIPIC_MIPI4DPHY_DELAY_COUNT_MASK (0xf << 11) |
| #define CSB_SHIFT 9 |
| #define CSB_MASK (3 << 9) |
| #define CSB_20MHZ (0 << 9) |
| #define CSB_10MHZ (1 << 9) |
| #define CSB_40MHZ (2 << 9) |
| #define BANDGAP_MASK (1 << 8) |
| #define BANDGAP_PNW_CIRCUIT (0 << 8) |
| #define BANDGAP_LNC_CIRCUIT (1 << 8) |
| #define MIPIC_FLISDSI_DELAY_COUNT_LOW_SHIFT 5 |
| #define MIPIC_FLISDSI_DELAY_COUNT_LOW_MASK (7 << 5) |
| #define TEARING_EFFECT_DELAY (1 << 4) /* A + C */ |
| #define TEARING_EFFECT_SHIFT 2 /* A + C */ |
| #define TEARING_EFFECT_MASK (3 << 2) |
| #define TEARING_EFFECT_OFF (0 << 2) |
| #define TEARING_EFFECT_DSI (1 << 2) |
| #define TEARING_EFFECT_GPIO (2 << 2) |
| #define LANE_CONFIGURATION_SHIFT 0 |
| #define LANE_CONFIGURATION_MASK (3 << 0) |
| #define LANE_CONFIGURATION_4LANE (0 << 0) |
| #define LANE_CONFIGURATION_DUAL_LINK_A (1 << 0) |
| #define LANE_CONFIGURATION_DUAL_LINK_B (2 << 0) |
| |
| #define _MIPIA_TEARING_CTRL (VLV_DISPLAY_BASE + 0x61194) |
| #define _MIPIC_TEARING_CTRL (VLV_DISPLAY_BASE + 0x61704) |
| #define MIPI_TEARING_CTRL(port) _MMIO_MIPI(port, _MIPIA_TEARING_CTRL, _MIPIC_TEARING_CTRL) |
| #define TEARING_EFFECT_DELAY_SHIFT 0 |
| #define TEARING_EFFECT_DELAY_MASK (0xffff << 0) |
| |
| /* XXX: all bits reserved */ |
| #define _MIPIA_AUTOPWG (VLV_DISPLAY_BASE + 0x611a0) |
| |
| /* MIPI DSI Controller and D-PHY registers */ |
| |
| #define _MIPIA_DEVICE_READY (dev_priv->mipi_mmio_base + 0xb000) |
| #define _MIPIC_DEVICE_READY (dev_priv->mipi_mmio_base + 0xb800) |
| #define MIPI_DEVICE_READY(port) _MMIO_MIPI(port, _MIPIA_DEVICE_READY, _MIPIC_DEVICE_READY) |
| #define BUS_POSSESSION (1 << 3) /* set to give bus to receiver */ |
| #define ULPS_STATE_MASK (3 << 1) |
| #define ULPS_STATE_ENTER (2 << 1) |
| #define ULPS_STATE_EXIT (1 << 1) |
| #define ULPS_STATE_NORMAL_OPERATION (0 << 1) |
| #define DEVICE_READY (1 << 0) |
| |
| #define _MIPIA_INTR_STAT (dev_priv->mipi_mmio_base + 0xb004) |
| #define _MIPIC_INTR_STAT (dev_priv->mipi_mmio_base + 0xb804) |
| #define MIPI_INTR_STAT(port) _MMIO_MIPI(port, _MIPIA_INTR_STAT, _MIPIC_INTR_STAT) |
| #define _MIPIA_INTR_EN (dev_priv->mipi_mmio_base + 0xb008) |
| #define _MIPIC_INTR_EN (dev_priv->mipi_mmio_base + 0xb808) |
| #define MIPI_INTR_EN(port) _MMIO_MIPI(port, _MIPIA_INTR_EN, _MIPIC_INTR_EN) |
| #define TEARING_EFFECT (1 << 31) |
| #define SPL_PKT_SENT_INTERRUPT (1 << 30) |
| #define GEN_READ_DATA_AVAIL (1 << 29) |
| #define LP_GENERIC_WR_FIFO_FULL (1 << 28) |
| #define HS_GENERIC_WR_FIFO_FULL (1 << 27) |
| #define RX_PROT_VIOLATION (1 << 26) |
| #define RX_INVALID_TX_LENGTH (1 << 25) |
| #define ACK_WITH_NO_ERROR (1 << 24) |
| #define TURN_AROUND_ACK_TIMEOUT (1 << 23) |
| #define LP_RX_TIMEOUT (1 << 22) |
| #define HS_TX_TIMEOUT (1 << 21) |
| #define DPI_FIFO_UNDERRUN (1 << 20) |
| #define LOW_CONTENTION (1 << 19) |
| #define HIGH_CONTENTION (1 << 18) |
| #define TXDSI_VC_ID_INVALID (1 << 17) |
| #define TXDSI_DATA_TYPE_NOT_RECOGNISED (1 << 16) |
| #define TXCHECKSUM_ERROR (1 << 15) |
| #define TXECC_MULTIBIT_ERROR (1 << 14) |
| #define TXECC_SINGLE_BIT_ERROR (1 << 13) |
| #define TXFALSE_CONTROL_ERROR (1 << 12) |
| #define RXDSI_VC_ID_INVALID (1 << 11) |
| #define RXDSI_DATA_TYPE_NOT_REGOGNISED (1 << 10) |
| #define RXCHECKSUM_ERROR (1 << 9) |
| #define RXECC_MULTIBIT_ERROR (1 << 8) |
| #define RXECC_SINGLE_BIT_ERROR (1 << 7) |
| #define RXFALSE_CONTROL_ERROR (1 << 6) |
| #define RXHS_RECEIVE_TIMEOUT_ERROR (1 << 5) |
| #define RX_LP_TX_SYNC_ERROR (1 << 4) |
| #define RXEXCAPE_MODE_ENTRY_ERROR (1 << 3) |
| #define RXEOT_SYNC_ERROR (1 << 2) |
| #define RXSOT_SYNC_ERROR (1 << 1) |
| #define RXSOT_ERROR (1 << 0) |
| |
| #define _MIPIA_DSI_FUNC_PRG (dev_priv->mipi_mmio_base + 0xb00c) |
| #define _MIPIC_DSI_FUNC_PRG (dev_priv->mipi_mmio_base + 0xb80c) |
| #define MIPI_DSI_FUNC_PRG(port) _MMIO_MIPI(port, _MIPIA_DSI_FUNC_PRG, _MIPIC_DSI_FUNC_PRG) |
| #define CMD_MODE_DATA_WIDTH_MASK (7 << 13) |
| #define CMD_MODE_NOT_SUPPORTED (0 << 13) |
| #define CMD_MODE_DATA_WIDTH_16_BIT (1 << 13) |
| #define CMD_MODE_DATA_WIDTH_9_BIT (2 << 13) |
| #define CMD_MODE_DATA_WIDTH_8_BIT (3 << 13) |
| #define CMD_MODE_DATA_WIDTH_OPTION1 (4 << 13) |
| #define CMD_MODE_DATA_WIDTH_OPTION2 (5 << 13) |
| #define VID_MODE_FORMAT_MASK (0xf << 7) |
| #define VID_MODE_NOT_SUPPORTED (0 << 7) |
| #define VID_MODE_FORMAT_RGB565 (1 << 7) |
| #define VID_MODE_FORMAT_RGB666_PACKED (2 << 7) |
| #define VID_MODE_FORMAT_RGB666 (3 << 7) |
| #define VID_MODE_FORMAT_RGB888 (4 << 7) |
| #define CMD_MODE_CHANNEL_NUMBER_SHIFT 5 |
| #define CMD_MODE_CHANNEL_NUMBER_MASK (3 << 5) |
| #define VID_MODE_CHANNEL_NUMBER_SHIFT 3 |
| #define VID_MODE_CHANNEL_NUMBER_MASK (3 << 3) |
| #define DATA_LANES_PRG_REG_SHIFT 0 |
| #define DATA_LANES_PRG_REG_MASK (7 << 0) |
| |
| #define _MIPIA_HS_TX_TIMEOUT (dev_priv->mipi_mmio_base + 0xb010) |
| #define _MIPIC_HS_TX_TIMEOUT (dev_priv->mipi_mmio_base + 0xb810) |
| #define MIPI_HS_TX_TIMEOUT(port) _MMIO_MIPI(port, _MIPIA_HS_TX_TIMEOUT, _MIPIC_HS_TX_TIMEOUT) |
| #define HIGH_SPEED_TX_TIMEOUT_COUNTER_MASK 0xffffff |
| |
| #define _MIPIA_LP_RX_TIMEOUT (dev_priv->mipi_mmio_base + 0xb014) |
| #define _MIPIC_LP_RX_TIMEOUT (dev_priv->mipi_mmio_base + 0xb814) |
| #define MIPI_LP_RX_TIMEOUT(port) _MMIO_MIPI(port, _MIPIA_LP_RX_TIMEOUT, _MIPIC_LP_RX_TIMEOUT) |
| #define LOW_POWER_RX_TIMEOUT_COUNTER_MASK 0xffffff |
| |
| #define _MIPIA_TURN_AROUND_TIMEOUT (dev_priv->mipi_mmio_base + 0xb018) |
| #define _MIPIC_TURN_AROUND_TIMEOUT (dev_priv->mipi_mmio_base + 0xb818) |
| #define MIPI_TURN_AROUND_TIMEOUT(port) _MMIO_MIPI(port, _MIPIA_TURN_AROUND_TIMEOUT, _MIPIC_TURN_AROUND_TIMEOUT) |
| #define TURN_AROUND_TIMEOUT_MASK 0x3f |
| |
| #define _MIPIA_DEVICE_RESET_TIMER (dev_priv->mipi_mmio_base + 0xb01c) |
| #define _MIPIC_DEVICE_RESET_TIMER (dev_priv->mipi_mmio_base + 0xb81c) |
| #define MIPI_DEVICE_RESET_TIMER(port) _MMIO_MIPI(port, _MIPIA_DEVICE_RESET_TIMER, _MIPIC_DEVICE_RESET_TIMER) |
| #define DEVICE_RESET_TIMER_MASK 0xffff |
| |
| #define _MIPIA_DPI_RESOLUTION (dev_priv->mipi_mmio_base + 0xb020) |
| #define _MIPIC_DPI_RESOLUTION (dev_priv->mipi_mmio_base + 0xb820) |
| #define MIPI_DPI_RESOLUTION(port) _MMIO_MIPI(port, _MIPIA_DPI_RESOLUTION, _MIPIC_DPI_RESOLUTION) |
| #define VERTICAL_ADDRESS_SHIFT 16 |
| #define VERTICAL_ADDRESS_MASK (0xffff << 16) |
| #define HORIZONTAL_ADDRESS_SHIFT 0 |
| #define HORIZONTAL_ADDRESS_MASK 0xffff |
| |
| #define _MIPIA_DBI_FIFO_THROTTLE (dev_priv->mipi_mmio_base + 0xb024) |
| #define _MIPIC_DBI_FIFO_THROTTLE (dev_priv->mipi_mmio_base + 0xb824) |
| #define MIPI_DBI_FIFO_THROTTLE(port) _MMIO_MIPI(port, _MIPIA_DBI_FIFO_THROTTLE, _MIPIC_DBI_FIFO_THROTTLE) |
| #define DBI_FIFO_EMPTY_HALF (0 << 0) |
| #define DBI_FIFO_EMPTY_QUARTER (1 << 0) |
| #define DBI_FIFO_EMPTY_7_LOCATIONS (2 << 0) |
| |
| /* regs below are bits 15:0 */ |
| #define _MIPIA_HSYNC_PADDING_COUNT (dev_priv->mipi_mmio_base + 0xb028) |
| #define _MIPIC_HSYNC_PADDING_COUNT (dev_priv->mipi_mmio_base + 0xb828) |
| #define MIPI_HSYNC_PADDING_COUNT(port) _MMIO_MIPI(port, _MIPIA_HSYNC_PADDING_COUNT, _MIPIC_HSYNC_PADDING_COUNT) |
| |
| #define _MIPIA_HBP_COUNT (dev_priv->mipi_mmio_base + 0xb02c) |
| #define _MIPIC_HBP_COUNT (dev_priv->mipi_mmio_base + 0xb82c) |
| #define MIPI_HBP_COUNT(port) _MMIO_MIPI(port, _MIPIA_HBP_COUNT, _MIPIC_HBP_COUNT) |
| |
| #define _MIPIA_HFP_COUNT (dev_priv->mipi_mmio_base + 0xb030) |
| #define _MIPIC_HFP_COUNT (dev_priv->mipi_mmio_base + 0xb830) |
| #define MIPI_HFP_COUNT(port) _MMIO_MIPI(port, _MIPIA_HFP_COUNT, _MIPIC_HFP_COUNT) |
| |
| #define _MIPIA_HACTIVE_AREA_COUNT (dev_priv->mipi_mmio_base + 0xb034) |
| #define _MIPIC_HACTIVE_AREA_COUNT (dev_priv->mipi_mmio_base + 0xb834) |
| #define MIPI_HACTIVE_AREA_COUNT(port) _MMIO_MIPI(port, _MIPIA_HACTIVE_AREA_COUNT, _MIPIC_HACTIVE_AREA_COUNT) |
| |
| #define _MIPIA_VSYNC_PADDING_COUNT (dev_priv->mipi_mmio_base + 0xb038) |
| #define _MIPIC_VSYNC_PADDING_COUNT (dev_priv->mipi_mmio_base + 0xb838) |
| #define MIPI_VSYNC_PADDING_COUNT(port) _MMIO_MIPI(port, _MIPIA_VSYNC_PADDING_COUNT, _MIPIC_VSYNC_PADDING_COUNT) |
| |
| #define _MIPIA_VBP_COUNT (dev_priv->mipi_mmio_base + 0xb03c) |
| #define _MIPIC_VBP_COUNT (dev_priv->mipi_mmio_base + 0xb83c) |
| #define MIPI_VBP_COUNT(port) _MMIO_MIPI(port, _MIPIA_VBP_COUNT, _MIPIC_VBP_COUNT) |
| |
| #define _MIPIA_VFP_COUNT (dev_priv->mipi_mmio_base + 0xb040) |
| #define _MIPIC_VFP_COUNT (dev_priv->mipi_mmio_base + 0xb840) |
| #define MIPI_VFP_COUNT(port) _MMIO_MIPI(port, _MIPIA_VFP_COUNT, _MIPIC_VFP_COUNT) |
| |
| #define _MIPIA_HIGH_LOW_SWITCH_COUNT (dev_priv->mipi_mmio_base + 0xb044) |
| #define _MIPIC_HIGH_LOW_SWITCH_COUNT (dev_priv->mipi_mmio_base + 0xb844) |
| #define MIPI_HIGH_LOW_SWITCH_COUNT(port) _MMIO_MIPI(port, _MIPIA_HIGH_LOW_SWITCH_COUNT, _MIPIC_HIGH_LOW_SWITCH_COUNT) |
| |
| /* regs above are bits 15:0 */ |
| |
| #define _MIPIA_DPI_CONTROL (dev_priv->mipi_mmio_base + 0xb048) |
| #define _MIPIC_DPI_CONTROL (dev_priv->mipi_mmio_base + 0xb848) |
| #define MIPI_DPI_CONTROL(port) _MMIO_MIPI(port, _MIPIA_DPI_CONTROL, _MIPIC_DPI_CONTROL) |
| #define DPI_LP_MODE (1 << 6) |
| #define BACKLIGHT_OFF (1 << 5) |
| #define BACKLIGHT_ON (1 << 4) |
| #define COLOR_MODE_OFF (1 << 3) |
| #define COLOR_MODE_ON (1 << 2) |
| #define TURN_ON (1 << 1) |
| #define SHUTDOWN (1 << 0) |
| |
| #define _MIPIA_DPI_DATA (dev_priv->mipi_mmio_base + 0xb04c) |
| #define _MIPIC_DPI_DATA (dev_priv->mipi_mmio_base + 0xb84c) |
| #define MIPI_DPI_DATA(port) _MMIO_MIPI(port, _MIPIA_DPI_DATA, _MIPIC_DPI_DATA) |
| #define COMMAND_BYTE_SHIFT 0 |
| #define COMMAND_BYTE_MASK (0x3f << 0) |
| |
| #define _MIPIA_INIT_COUNT (dev_priv->mipi_mmio_base + 0xb050) |
| #define _MIPIC_INIT_COUNT (dev_priv->mipi_mmio_base + 0xb850) |
| #define MIPI_INIT_COUNT(port) _MMIO_MIPI(port, _MIPIA_INIT_COUNT, _MIPIC_INIT_COUNT) |
| #define MASTER_INIT_TIMER_SHIFT 0 |
| #define MASTER_INIT_TIMER_MASK (0xffff << 0) |
| |
| #define _MIPIA_MAX_RETURN_PKT_SIZE (dev_priv->mipi_mmio_base + 0xb054) |
| #define _MIPIC_MAX_RETURN_PKT_SIZE (dev_priv->mipi_mmio_base + 0xb854) |
| #define MIPI_MAX_RETURN_PKT_SIZE(port) _MMIO_MIPI(port, \ |
| _MIPIA_MAX_RETURN_PKT_SIZE, _MIPIC_MAX_RETURN_PKT_SIZE) |
| #define MAX_RETURN_PKT_SIZE_SHIFT 0 |
| #define MAX_RETURN_PKT_SIZE_MASK (0x3ff << 0) |
| |
| #define _MIPIA_VIDEO_MODE_FORMAT (dev_priv->mipi_mmio_base + 0xb058) |
| #define _MIPIC_VIDEO_MODE_FORMAT (dev_priv->mipi_mmio_base + 0xb858) |
| #define MIPI_VIDEO_MODE_FORMAT(port) _MMIO_MIPI(port, _MIPIA_VIDEO_MODE_FORMAT, _MIPIC_VIDEO_MODE_FORMAT) |
| #define RANDOM_DPI_DISPLAY_RESOLUTION (1 << 4) |
| #define DISABLE_VIDEO_BTA (1 << 3) |
| #define IP_TG_CONFIG (1 << 2) |
| #define VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE (1 << 0) |
| #define VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS (2 << 0) |
| #define VIDEO_MODE_BURST (3 << 0) |
| |
| #define _MIPIA_EOT_DISABLE (dev_priv->mipi_mmio_base + 0xb05c) |
| #define _MIPIC_EOT_DISABLE (dev_priv->mipi_mmio_base + 0xb85c) |
| #define MIPI_EOT_DISABLE(port) _MMIO_MIPI(port, _MIPIA_EOT_DISABLE, _MIPIC_EOT_DISABLE) |
| #define BXT_DEFEATURE_DPI_FIFO_CTR (1 << 9) |
| #define BXT_DPHY_DEFEATURE_EN (1 << 8) |
| #define LP_RX_TIMEOUT_ERROR_RECOVERY_DISABLE (1 << 7) |
| #define HS_RX_TIMEOUT_ERROR_RECOVERY_DISABLE (1 << 6) |
| #define LOW_CONTENTION_RECOVERY_DISABLE (1 << 5) |
| #define HIGH_CONTENTION_RECOVERY_DISABLE (1 << 4) |
| #define TXDSI_TYPE_NOT_RECOGNISED_ERROR_RECOVERY_DISABLE (1 << 3) |
| #define TXECC_MULTIBIT_ERROR_RECOVERY_DISABLE (1 << 2) |
| #define CLOCKSTOP (1 << 1) |
| #define EOT_DISABLE (1 << 0) |
| |
| #define _MIPIA_LP_BYTECLK (dev_priv->mipi_mmio_base + 0xb060) |
| #define _MIPIC_LP_BYTECLK (dev_priv->mipi_mmio_base + 0xb860) |
| #define MIPI_LP_BYTECLK(port) _MMIO_MIPI(port, _MIPIA_LP_BYTECLK, _MIPIC_LP_BYTECLK) |
| #define LP_BYTECLK_SHIFT 0 |
| #define LP_BYTECLK_MASK (0xffff << 0) |
| |
| /* bits 31:0 */ |
| #define _MIPIA_LP_GEN_DATA (dev_priv->mipi_mmio_base + 0xb064) |
| #define _MIPIC_LP_GEN_DATA (dev_priv->mipi_mmio_base + 0xb864) |
| #define MIPI_LP_GEN_DATA(port) _MMIO_MIPI(port, _MIPIA_LP_GEN_DATA, _MIPIC_LP_GEN_DATA) |
| |
| /* bits 31:0 */ |
| #define _MIPIA_HS_GEN_DATA (dev_priv->mipi_mmio_base + 0xb068) |
| #define _MIPIC_HS_GEN_DATA (dev_priv->mipi_mmio_base + 0xb868) |
| #define MIPI_HS_GEN_DATA(port) _MMIO_MIPI(port, _MIPIA_HS_GEN_DATA, _MIPIC_HS_GEN_DATA) |
| |
| #define _MIPIA_LP_GEN_CTRL (dev_priv->mipi_mmio_base + 0xb06c) |
| #define _MIPIC_LP_GEN_CTRL (dev_priv->mipi_mmio_base + 0xb86c) |
| #define MIPI_LP_GEN_CTRL(port) _MMIO_MIPI(port, _MIPIA_LP_GEN_CTRL, _MIPIC_LP_GEN_CTRL) |
| #define _MIPIA_HS_GEN_CTRL (dev_priv->mipi_mmio_base + 0xb070) |
| #define _MIPIC_HS_GEN_CTRL (dev_priv->mipi_mmio_base + 0xb870) |
| #define MIPI_HS_GEN_CTRL(port) _MMIO_MIPI(port, _MIPIA_HS_GEN_CTRL, _MIPIC_HS_GEN_CTRL) |
| #define LONG_PACKET_WORD_COUNT_SHIFT 8 |
| #define LONG_PACKET_WORD_COUNT_MASK (0xffff << 8) |
| #define SHORT_PACKET_PARAM_SHIFT 8 |
| #define SHORT_PACKET_PARAM_MASK (0xffff << 8) |
| #define VIRTUAL_CHANNEL_SHIFT 6 |
| #define VIRTUAL_CHANNEL_MASK (3 << 6) |
| #define DATA_TYPE_SHIFT 0 |
| #define DATA_TYPE_MASK (0x3f << 0) |
| /* data type values, see include/video/mipi_display.h */ |
| |
| #define _MIPIA_GEN_FIFO_STAT (dev_priv->mipi_mmio_base + 0xb074) |
| #define _MIPIC_GEN_FIFO_STAT (dev_priv->mipi_mmio_base + 0xb874) |
| #define MIPI_GEN_FIFO_STAT(port) _MMIO_MIPI(port, _MIPIA_GEN_FIFO_STAT, _MIPIC_GEN_FIFO_STAT) |
| #define DPI_FIFO_EMPTY (1 << 28) |
| #define DBI_FIFO_EMPTY (1 << 27) |
| #define LP_CTRL_FIFO_EMPTY (1 << 26) |
| #define LP_CTRL_FIFO_HALF_EMPTY (1 << 25) |
| #define LP_CTRL_FIFO_FULL (1 << 24) |
| #define HS_CTRL_FIFO_EMPTY (1 << 18) |
| #define HS_CTRL_FIFO_HALF_EMPTY (1 << 17) |
| #define HS_CTRL_FIFO_FULL (1 << 16) |
| #define LP_DATA_FIFO_EMPTY (1 << 10) |
| #define LP_DATA_FIFO_HALF_EMPTY (1 << 9) |
| #define LP_DATA_FIFO_FULL (1 << 8) |
| #define HS_DATA_FIFO_EMPTY (1 << 2) |
| #define HS_DATA_FIFO_HALF_EMPTY (1 << 1) |
| #define HS_DATA_FIFO_FULL (1 << 0) |
| |
| #define _MIPIA_HS_LS_DBI_ENABLE (dev_priv->mipi_mmio_base + 0xb078) |
| #define _MIPIC_HS_LS_DBI_ENABLE (dev_priv->mipi_mmio_base + 0xb878) |
| #define MIPI_HS_LP_DBI_ENABLE(port) _MMIO_MIPI(port, _MIPIA_HS_LS_DBI_ENABLE, _MIPIC_HS_LS_DBI_ENABLE) |
| #define DBI_HS_LP_MODE_MASK (1 << 0) |
| #define DBI_LP_MODE (1 << 0) |
| #define DBI_HS_MODE (0 << 0) |
| |
| #define _MIPIA_DPHY_PARAM (dev_priv->mipi_mmio_base + 0xb080) |
| #define _MIPIC_DPHY_PARAM (dev_priv->mipi_mmio_base + 0xb880) |
| #define MIPI_DPHY_PARAM(port) _MMIO_MIPI(port, _MIPIA_DPHY_PARAM, _MIPIC_DPHY_PARAM) |
| #define EXIT_ZERO_COUNT_SHIFT 24 |
| #define EXIT_ZERO_COUNT_MASK (0x3f << 24) |
| #define TRAIL_COUNT_SHIFT 16 |
| #define TRAIL_COUNT_MASK (0x1f << 16) |
| #define CLK_ZERO_COUNT_SHIFT 8 |
| #define CLK_ZERO_COUNT_MASK (0xff << 8) |
| #define PREPARE_COUNT_SHIFT 0 |
| #define PREPARE_COUNT_MASK (0x3f << 0) |
| |
| /* bits 31:0 */ |
| #define _MIPIA_DBI_BW_CTRL (dev_priv->mipi_mmio_base + 0xb084) |
| #define _MIPIC_DBI_BW_CTRL (dev_priv->mipi_mmio_base + 0xb884) |
| #define MIPI_DBI_BW_CTRL(port) _MMIO_MIPI(port, _MIPIA_DBI_BW_CTRL, _MIPIC_DBI_BW_CTRL) |
| |
| #define _MIPIA_CLK_LANE_SWITCH_TIME_CNT (dev_priv->mipi_mmio_base + 0xb088) |
| #define _MIPIC_CLK_LANE_SWITCH_TIME_CNT (dev_priv->mipi_mmio_base + 0xb888) |
| #define MIPI_CLK_LANE_SWITCH_TIME_CNT(port) _MMIO_MIPI(port, _MIPIA_CLK_LANE_SWITCH_TIME_CNT, _MIPIC_CLK_LANE_SWITCH_TIME_CNT) |
| #define LP_HS_SSW_CNT_SHIFT 16 |
| #define LP_HS_SSW_CNT_MASK (0xffff << 16) |
| #define HS_LP_PWR_SW_CNT_SHIFT 0 |
| #define HS_LP_PWR_SW_CNT_MASK (0xffff << 0) |
| |
| #define _MIPIA_STOP_STATE_STALL (dev_priv->mipi_mmio_base + 0xb08c) |
| #define _MIPIC_STOP_STATE_STALL (dev_priv->mipi_mmio_base + 0xb88c) |
| #define MIPI_STOP_STATE_STALL(port) _MMIO_MIPI(port, _MIPIA_STOP_STATE_STALL, _MIPIC_STOP_STATE_STALL) |
| #define STOP_STATE_STALL_COUNTER_SHIFT 0 |
| #define STOP_STATE_STALL_COUNTER_MASK (0xff << 0) |
| |
| #define _MIPIA_INTR_STAT_REG_1 (dev_priv->mipi_mmio_base + 0xb090) |
| #define _MIPIC_INTR_STAT_REG_1 (dev_priv->mipi_mmio_base + 0xb890) |
| #define MIPI_INTR_STAT_REG_1(port) _MMIO_MIPI(port, _MIPIA_INTR_STAT_REG_1, _MIPIC_INTR_STAT_REG_1) |
| #define _MIPIA_INTR_EN_REG_1 (dev_priv->mipi_mmio_base + 0xb094) |
| #define _MIPIC_INTR_EN_REG_1 (dev_priv->mipi_mmio_base + 0xb894) |
| #define MIPI_INTR_EN_REG_1(port) _MMIO_MIPI(port, _MIPIA_INTR_EN_REG_1, _MIPIC_INTR_EN_REG_1) |
| #define RX_CONTENTION_DETECTED (1 << 0) |
| |
| /* XXX: only pipe A ?!? */ |
| #define MIPIA_DBI_TYPEC_CTRL (dev_priv->mipi_mmio_base + 0xb100) |
| #define DBI_TYPEC_ENABLE (1 << 31) |
| #define DBI_TYPEC_WIP (1 << 30) |
| #define DBI_TYPEC_OPTION_SHIFT 28 |
| #define DBI_TYPEC_OPTION_MASK (3 << 28) |
| #define DBI_TYPEC_FREQ_SHIFT 24 |
| #define DBI_TYPEC_FREQ_MASK (0xf << 24) |
| #define DBI_TYPEC_OVERRIDE (1 << 8) |
| #define DBI_TYPEC_OVERRIDE_COUNTER_SHIFT 0 |
| #define DBI_TYPEC_OVERRIDE_COUNTER_MASK (0xff << 0) |
| |
| |
| /* MIPI adapter registers */ |
| |
| #define _MIPIA_CTRL (dev_priv->mipi_mmio_base + 0xb104) |
| #define _MIPIC_CTRL (dev_priv->mipi_mmio_base + 0xb904) |
| #define MIPI_CTRL(port) _MMIO_MIPI(port, _MIPIA_CTRL, _MIPIC_CTRL) |
| #define ESCAPE_CLOCK_DIVIDER_SHIFT 5 /* A only */ |
| #define ESCAPE_CLOCK_DIVIDER_MASK (3 << 5) |
| #define ESCAPE_CLOCK_DIVIDER_1 (0 << 5) |
| #define ESCAPE_CLOCK_DIVIDER_2 (1 << 5) |
| #define ESCAPE_CLOCK_DIVIDER_4 (2 << 5) |
| #define READ_REQUEST_PRIORITY_SHIFT 3 |
| #define READ_REQUEST_PRIORITY_MASK (3 << 3) |
| #define READ_REQUEST_PRIORITY_LOW (0 << 3) |
| #define READ_REQUEST_PRIORITY_HIGH (3 << 3) |
| #define RGB_FLIP_TO_BGR (1 << 2) |
| |
| #define BXT_PIPE_SELECT_SHIFT 7 |
| #define BXT_PIPE_SELECT_MASK (7 << 7) |
| #define BXT_PIPE_SELECT(pipe) ((pipe) << 7) |
| |
| #define _MIPIA_DATA_ADDRESS (dev_priv->mipi_mmio_base + 0xb108) |
| #define _MIPIC_DATA_ADDRESS (dev_priv->mipi_mmio_base + 0xb908) |
| #define MIPI_DATA_ADDRESS(port) _MMIO_MIPI(port, _MIPIA_DATA_ADDRESS, _MIPIC_DATA_ADDRESS) |
| #define DATA_MEM_ADDRESS_SHIFT 5 |
| #define DATA_MEM_ADDRESS_MASK (0x7ffffff << 5) |
| #define DATA_VALID (1 << 0) |
| |
| #define _MIPIA_DATA_LENGTH (dev_priv->mipi_mmio_base + 0xb10c) |
| #define _MIPIC_DATA_LENGTH (dev_priv->mipi_mmio_base + 0xb90c) |
| #define MIPI_DATA_LENGTH(port) _MMIO_MIPI(port, _MIPIA_DATA_LENGTH, _MIPIC_DATA_LENGTH) |
| #define DATA_LENGTH_SHIFT 0 |
| #define DATA_LENGTH_MASK (0xfffff << 0) |
| |
| #define _MIPIA_COMMAND_ADDRESS (dev_priv->mipi_mmio_base + 0xb110) |
| #define _MIPIC_COMMAND_ADDRESS (dev_priv->mipi_mmio_base + 0xb910) |
| #define MIPI_COMMAND_ADDRESS(port) _MMIO_MIPI(port, _MIPIA_COMMAND_ADDRESS, _MIPIC_COMMAND_ADDRESS) |
| #define COMMAND_MEM_ADDRESS_SHIFT 5 |
| #define COMMAND_MEM_ADDRESS_MASK (0x7ffffff << 5) |
| #define AUTO_PWG_ENABLE (1 << 2) |
| #define MEMORY_WRITE_DATA_FROM_PIPE_RENDERING (1 << 1) |
| #define COMMAND_VALID (1 << 0) |
| |
| #define _MIPIA_COMMAND_LENGTH (dev_priv->mipi_mmio_base + 0xb114) |
| #define _MIPIC_COMMAND_LENGTH (dev_priv->mipi_mmio_base + 0xb914) |
| #define MIPI_COMMAND_LENGTH(port) _MMIO_MIPI(port, _MIPIA_COMMAND_LENGTH, _MIPIC_COMMAND_LENGTH) |
| #define COMMAND_LENGTH_SHIFT(n) (8 * (n)) /* n: 0...3 */ |
| #define COMMAND_LENGTH_MASK(n) (0xff << (8 * (n))) |
| |
| #define _MIPIA_READ_DATA_RETURN0 (dev_priv->mipi_mmio_base + 0xb118) |
| #define _MIPIC_READ_DATA_RETURN0 (dev_priv->mipi_mmio_base + 0xb918) |
| #define MIPI_READ_DATA_RETURN(port, n) _MMIO(_MIPI(port, _MIPIA_READ_DATA_RETURN0, _MIPIC_READ_DATA_RETURN0) + 4 * (n)) /* n: 0...7 */ |
| |
| #define _MIPIA_READ_DATA_VALID (dev_priv->mipi_mmio_base + 0xb138) |
| #define _MIPIC_READ_DATA_VALID (dev_priv->mipi_mmio_base + 0xb938) |
| #define MIPI_READ_DATA_VALID(port) _MMIO_MIPI(port, _MIPIA_READ_DATA_VALID, _MIPIC_READ_DATA_VALID) |
| #define READ_DATA_VALID(n) (1 << (n)) |
| |
| /* For UMS only (deprecated): */ |
| #define _PALETTE_A (dev_priv->info.display_mmio_offset + 0xa000) |
| #define _PALETTE_B (dev_priv->info.display_mmio_offset + 0xa800) |
| |
| /* MOCS (Memory Object Control State) registers */ |
| #define GEN9_LNCFCMOCS(i) _MMIO(0xb020 + (i) * 4) /* L3 Cache Control */ |
| |
| #define GEN9_GFX_MOCS(i) _MMIO(0xc800 + (i) * 4) /* Graphics MOCS registers */ |
| #define GEN9_MFX0_MOCS(i) _MMIO(0xc900 + (i) * 4) /* Media 0 MOCS registers */ |
| #define GEN9_MFX1_MOCS(i) _MMIO(0xca00 + (i) * 4) /* Media 1 MOCS registers */ |
| #define GEN9_VEBOX_MOCS(i) _MMIO(0xcb00 + (i) * 4) /* Video MOCS registers */ |
| #define GEN9_BLT_MOCS(i) _MMIO(0xcc00 + (i) * 4) /* Blitter MOCS registers */ |
| |
| /* gamt regs */ |
| #define GEN8_L3_LRA_1_GPGPU _MMIO(0x4dd4) |
| #define GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_BDW 0x67F1427F /* max/min for LRA1/2 */ |
| #define GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_CHV 0x5FF101FF /* max/min for LRA1/2 */ |
| #define GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_SKL 0x67F1427F /* " " */ |
| #define GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_BXT 0x5FF101FF /* " " */ |
| |
| #endif /* _I915_REG_H_ */ |