| /* |
| * linux/arch/alpha/kernel/sys_dp264.c |
| * |
| * Copyright (C) 1995 David A Rusling |
| * Copyright (C) 1996, 1999 Jay A Estabrook |
| * Copyright (C) 1998, 1999 Richard Henderson |
| * |
| * Modified by Christopher C. Chimelis, 2001 to |
| * add support for the addition of Shark to the |
| * Tsunami family. |
| * |
| * Code supporting the DP264 (EV6+TSUNAMI). |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <asm/dma.h> |
| #include <asm/irq.h> |
| #include <asm/mmu_context.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/core_tsunami.h> |
| #include <asm/hwrpb.h> |
| #include <asm/tlbflush.h> |
| |
| #include "proto.h" |
| #include "irq_impl.h" |
| #include "pci_impl.h" |
| #include "machvec_impl.h" |
| |
| |
| /* Note mask bit is true for ENABLED irqs. */ |
| static unsigned long cached_irq_mask; |
| /* dp264 boards handle at max four CPUs */ |
| static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL }; |
| |
| DEFINE_SPINLOCK(dp264_irq_lock); |
| |
| static void |
| tsunami_update_irq_hw(unsigned long mask) |
| { |
| register tsunami_cchip *cchip = TSUNAMI_cchip; |
| unsigned long isa_enable = 1UL << 55; |
| register int bcpu = boot_cpuid; |
| |
| #ifdef CONFIG_SMP |
| volatile unsigned long *dim0, *dim1, *dim2, *dim3; |
| unsigned long mask0, mask1, mask2, mask3, dummy; |
| |
| mask &= ~isa_enable; |
| mask0 = mask & cpu_irq_affinity[0]; |
| mask1 = mask & cpu_irq_affinity[1]; |
| mask2 = mask & cpu_irq_affinity[2]; |
| mask3 = mask & cpu_irq_affinity[3]; |
| |
| if (bcpu == 0) mask0 |= isa_enable; |
| else if (bcpu == 1) mask1 |= isa_enable; |
| else if (bcpu == 2) mask2 |= isa_enable; |
| else mask3 |= isa_enable; |
| |
| dim0 = &cchip->dim0.csr; |
| dim1 = &cchip->dim1.csr; |
| dim2 = &cchip->dim2.csr; |
| dim3 = &cchip->dim3.csr; |
| if (!cpu_possible(0)) dim0 = &dummy; |
| if (!cpu_possible(1)) dim1 = &dummy; |
| if (!cpu_possible(2)) dim2 = &dummy; |
| if (!cpu_possible(3)) dim3 = &dummy; |
| |
| *dim0 = mask0; |
| *dim1 = mask1; |
| *dim2 = mask2; |
| *dim3 = mask3; |
| mb(); |
| *dim0; |
| *dim1; |
| *dim2; |
| *dim3; |
| #else |
| volatile unsigned long *dimB; |
| if (bcpu == 0) dimB = &cchip->dim0.csr; |
| else if (bcpu == 1) dimB = &cchip->dim1.csr; |
| else if (bcpu == 2) dimB = &cchip->dim2.csr; |
| else dimB = &cchip->dim3.csr; |
| |
| *dimB = mask | isa_enable; |
| mb(); |
| *dimB; |
| #endif |
| } |
| |
| static void |
| dp264_enable_irq(unsigned int irq) |
| { |
| spin_lock(&dp264_irq_lock); |
| cached_irq_mask |= 1UL << irq; |
| tsunami_update_irq_hw(cached_irq_mask); |
| spin_unlock(&dp264_irq_lock); |
| } |
| |
| static void |
| dp264_disable_irq(unsigned int irq) |
| { |
| spin_lock(&dp264_irq_lock); |
| cached_irq_mask &= ~(1UL << irq); |
| tsunami_update_irq_hw(cached_irq_mask); |
| spin_unlock(&dp264_irq_lock); |
| } |
| |
| static unsigned int |
| dp264_startup_irq(unsigned int irq) |
| { |
| dp264_enable_irq(irq); |
| return 0; /* never anything pending */ |
| } |
| |
| static void |
| dp264_end_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) |
| dp264_enable_irq(irq); |
| } |
| |
| static void |
| clipper_enable_irq(unsigned int irq) |
| { |
| spin_lock(&dp264_irq_lock); |
| cached_irq_mask |= 1UL << (irq - 16); |
| tsunami_update_irq_hw(cached_irq_mask); |
| spin_unlock(&dp264_irq_lock); |
| } |
| |
| static void |
| clipper_disable_irq(unsigned int irq) |
| { |
| spin_lock(&dp264_irq_lock); |
| cached_irq_mask &= ~(1UL << (irq - 16)); |
| tsunami_update_irq_hw(cached_irq_mask); |
| spin_unlock(&dp264_irq_lock); |
| } |
| |
| static unsigned int |
| clipper_startup_irq(unsigned int irq) |
| { |
| clipper_enable_irq(irq); |
| return 0; /* never anything pending */ |
| } |
| |
| static void |
| clipper_end_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) |
| clipper_enable_irq(irq); |
| } |
| |
| static void |
| cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) |
| { |
| int cpu; |
| |
| for (cpu = 0; cpu < 4; cpu++) { |
| unsigned long aff = cpu_irq_affinity[cpu]; |
| if (cpu_isset(cpu, affinity)) |
| aff |= 1UL << irq; |
| else |
| aff &= ~(1UL << irq); |
| cpu_irq_affinity[cpu] = aff; |
| } |
| } |
| |
| static void |
| dp264_set_affinity(unsigned int irq, cpumask_t affinity) |
| { |
| spin_lock(&dp264_irq_lock); |
| cpu_set_irq_affinity(irq, affinity); |
| tsunami_update_irq_hw(cached_irq_mask); |
| spin_unlock(&dp264_irq_lock); |
| } |
| |
| static void |
| clipper_set_affinity(unsigned int irq, cpumask_t affinity) |
| { |
| spin_lock(&dp264_irq_lock); |
| cpu_set_irq_affinity(irq - 16, affinity); |
| tsunami_update_irq_hw(cached_irq_mask); |
| spin_unlock(&dp264_irq_lock); |
| } |
| |
| static struct hw_interrupt_type dp264_irq_type = { |
| .typename = "DP264", |
| .startup = dp264_startup_irq, |
| .shutdown = dp264_disable_irq, |
| .enable = dp264_enable_irq, |
| .disable = dp264_disable_irq, |
| .ack = dp264_disable_irq, |
| .end = dp264_end_irq, |
| .set_affinity = dp264_set_affinity, |
| }; |
| |
| static struct hw_interrupt_type clipper_irq_type = { |
| .typename = "CLIPPER", |
| .startup = clipper_startup_irq, |
| .shutdown = clipper_disable_irq, |
| .enable = clipper_enable_irq, |
| .disable = clipper_disable_irq, |
| .ack = clipper_disable_irq, |
| .end = clipper_end_irq, |
| .set_affinity = clipper_set_affinity, |
| }; |
| |
| static void |
| dp264_device_interrupt(unsigned long vector) |
| { |
| #if 1 |
| printk("dp264_device_interrupt: NOT IMPLEMENTED YET!! \n"); |
| #else |
| unsigned long pld; |
| unsigned int i; |
| |
| /* Read the interrupt summary register of TSUNAMI */ |
| pld = TSUNAMI_cchip->dir0.csr; |
| |
| /* |
| * Now for every possible bit set, work through them and call |
| * the appropriate interrupt handler. |
| */ |
| while (pld) { |
| i = ffz(~pld); |
| pld &= pld - 1; /* clear least bit set */ |
| if (i == 55) |
| isa_device_interrupt(vector); |
| else |
| handle_irq(16 + i); |
| #if 0 |
| TSUNAMI_cchip->dir0.csr = 1UL << i; mb(); |
| tmp = TSUNAMI_cchip->dir0.csr; |
| #endif |
| } |
| #endif |
| } |
| |
| static void |
| dp264_srm_device_interrupt(unsigned long vector) |
| { |
| int irq; |
| |
| irq = (vector - 0x800) >> 4; |
| |
| /* |
| * The SRM console reports PCI interrupts with a vector calculated by: |
| * |
| * 0x900 + (0x10 * DRIR-bit) |
| * |
| * So bit 16 shows up as IRQ 32, etc. |
| * |
| * On DP264/BRICK/MONET, we adjust it down by 16 because at least |
| * that many of the low order bits of the DRIR are not used, and |
| * so we don't count them. |
| */ |
| if (irq >= 32) |
| irq -= 16; |
| |
| handle_irq(irq); |
| } |
| |
| static void |
| clipper_srm_device_interrupt(unsigned long vector) |
| { |
| int irq; |
| |
| irq = (vector - 0x800) >> 4; |
| |
| /* |
| * The SRM console reports PCI interrupts with a vector calculated by: |
| * |
| * 0x900 + (0x10 * DRIR-bit) |
| * |
| * So bit 16 shows up as IRQ 32, etc. |
| * |
| * CLIPPER uses bits 8-47 for PCI interrupts, so we do not need |
| * to scale down the vector reported, we just use it. |
| * |
| * Eg IRQ 24 is DRIR bit 8, etc, etc |
| */ |
| handle_irq(irq); |
| } |
| |
| static void __init |
| init_tsunami_irqs(struct hw_interrupt_type * ops, int imin, int imax) |
| { |
| long i; |
| for (i = imin; i <= imax; ++i) { |
| irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL; |
| irq_desc[i].chip = ops; |
| } |
| } |
| |
| static void __init |
| dp264_init_irq(void) |
| { |
| outb(0, DMA1_RESET_REG); |
| outb(0, DMA2_RESET_REG); |
| outb(DMA_MODE_CASCADE, DMA2_MODE_REG); |
| outb(0, DMA2_MASK_REG); |
| |
| if (alpha_using_srm) |
| alpha_mv.device_interrupt = dp264_srm_device_interrupt; |
| |
| tsunami_update_irq_hw(0); |
| |
| init_i8259a_irqs(); |
| init_tsunami_irqs(&dp264_irq_type, 16, 47); |
| } |
| |
| static void __init |
| clipper_init_irq(void) |
| { |
| outb(0, DMA1_RESET_REG); |
| outb(0, DMA2_RESET_REG); |
| outb(DMA_MODE_CASCADE, DMA2_MODE_REG); |
| outb(0, DMA2_MASK_REG); |
| |
| if (alpha_using_srm) |
| alpha_mv.device_interrupt = clipper_srm_device_interrupt; |
| |
| tsunami_update_irq_hw(0); |
| |
| init_i8259a_irqs(); |
| init_tsunami_irqs(&clipper_irq_type, 24, 63); |
| } |
| |
| |
| /* |
| * PCI Fixup configuration. |
| * |
| * Summary @ TSUNAMI_CSR_DIM0: |
| * Bit Meaning |
| * 0-17 Unused |
| *18 Interrupt SCSI B (Adaptec 7895 builtin) |
| *19 Interrupt SCSI A (Adaptec 7895 builtin) |
| *20 Interrupt Line D from slot 2 PCI0 |
| *21 Interrupt Line C from slot 2 PCI0 |
| *22 Interrupt Line B from slot 2 PCI0 |
| *23 Interrupt Line A from slot 2 PCI0 |
| *24 Interrupt Line D from slot 1 PCI0 |
| *25 Interrupt Line C from slot 1 PCI0 |
| *26 Interrupt Line B from slot 1 PCI0 |
| *27 Interrupt Line A from slot 1 PCI0 |
| *28 Interrupt Line D from slot 0 PCI0 |
| *29 Interrupt Line C from slot 0 PCI0 |
| *30 Interrupt Line B from slot 0 PCI0 |
| *31 Interrupt Line A from slot 0 PCI0 |
| * |
| *32 Interrupt Line D from slot 3 PCI1 |
| *33 Interrupt Line C from slot 3 PCI1 |
| *34 Interrupt Line B from slot 3 PCI1 |
| *35 Interrupt Line A from slot 3 PCI1 |
| *36 Interrupt Line D from slot 2 PCI1 |
| *37 Interrupt Line C from slot 2 PCI1 |
| *38 Interrupt Line B from slot 2 PCI1 |
| *39 Interrupt Line A from slot 2 PCI1 |
| *40 Interrupt Line D from slot 1 PCI1 |
| *41 Interrupt Line C from slot 1 PCI1 |
| *42 Interrupt Line B from slot 1 PCI1 |
| *43 Interrupt Line A from slot 1 PCI1 |
| *44 Interrupt Line D from slot 0 PCI1 |
| *45 Interrupt Line C from slot 0 PCI1 |
| *46 Interrupt Line B from slot 0 PCI1 |
| *47 Interrupt Line A from slot 0 PCI1 |
| *48-52 Unused |
| *53 PCI0 NMI (from Cypress) |
| *54 PCI0 SMI INT (from Cypress) |
| *55 PCI0 ISA Interrupt (from Cypress) |
| *56-60 Unused |
| *61 PCI1 Bus Error |
| *62 PCI0 Bus Error |
| *63 Reserved |
| * |
| * IdSel |
| * 5 Cypress Bridge I/O |
| * 6 SCSI Adaptec builtin |
| * 7 64 bit PCI option slot 0 (all busses) |
| * 8 64 bit PCI option slot 1 (all busses) |
| * 9 64 bit PCI option slot 2 (all busses) |
| * 10 64 bit PCI option slot 3 (not bus 0) |
| */ |
| |
| static int __init |
| isa_irq_fixup(struct pci_dev *dev, int irq) |
| { |
| u8 irq8; |
| |
| if (irq > 0) |
| return irq; |
| |
| /* This interrupt is routed via ISA bridge, so we'll |
| just have to trust whatever value the console might |
| have assigned. */ |
| pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8); |
| |
| return irq8 & 0xf; |
| } |
| |
| static int __init |
| dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| static char irq_tab[6][5] __initdata = { |
| /*INT INTA INTB INTC INTD */ |
| { -1, -1, -1, -1, -1}, /* IdSel 5 ISA Bridge */ |
| { 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/ |
| { 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */ |
| { 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */ |
| { 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */ |
| { 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0} /* IdSel 10 slot 3 */ |
| }; |
| const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5; |
| struct pci_controller *hose = dev->sysdata; |
| int irq = COMMON_TABLE_LOOKUP; |
| |
| if (irq > 0) |
| irq += 16 * hose->index; |
| |
| return isa_irq_fixup(dev, irq); |
| } |
| |
| static int __init |
| monet_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| static char irq_tab[13][5] __initdata = { |
| /*INT INTA INTB INTC INTD */ |
| { 45, 45, 45, 45, 45}, /* IdSel 3 21143 PCI1 */ |
| { -1, -1, -1, -1, -1}, /* IdSel 4 unused */ |
| { -1, -1, -1, -1, -1}, /* IdSel 5 unused */ |
| { 47, 47, 47, 47, 47}, /* IdSel 6 SCSI PCI1 */ |
| { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */ |
| { -1, -1, -1, -1, -1}, /* IdSel 8 P2P PCI1 */ |
| #if 1 |
| { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/ |
| { 24, 24, 25, 26, 27}, /* IdSel 15 slot 5 PCI2*/ |
| #else |
| { -1, -1, -1, -1, -1}, /* IdSel 9 unused */ |
| { -1, -1, -1, -1, -1}, /* IdSel 10 unused */ |
| #endif |
| { 40, 40, 41, 42, 43}, /* IdSel 11 slot 1 PCI0*/ |
| { 36, 36, 37, 38, 39}, /* IdSel 12 slot 2 PCI0*/ |
| { 32, 32, 33, 34, 35}, /* IdSel 13 slot 3 PCI0*/ |
| { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/ |
| { 24, 24, 25, 26, 27} /* IdSel 15 slot 5 PCI2*/ |
| }; |
| const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5; |
| |
| return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); |
| } |
| |
| static u8 __init |
| monet_swizzle(struct pci_dev *dev, u8 *pinp) |
| { |
| struct pci_controller *hose = dev->sysdata; |
| int slot, pin = *pinp; |
| |
| if (!dev->bus->parent) { |
| slot = PCI_SLOT(dev->devfn); |
| } |
| /* Check for the built-in bridge on hose 1. */ |
| else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) { |
| slot = PCI_SLOT(dev->devfn); |
| } else { |
| /* Must be a card-based bridge. */ |
| do { |
| /* Check for built-in bridge on hose 1. */ |
| if (hose->index == 1 && |
| PCI_SLOT(dev->bus->self->devfn) == 8) { |
| slot = PCI_SLOT(dev->devfn); |
| break; |
| } |
| pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ; |
| |
| /* Move up the chain of bridges. */ |
| dev = dev->bus->self; |
| /* Slot of the next bridge. */ |
| slot = PCI_SLOT(dev->devfn); |
| } while (dev->bus->self); |
| } |
| *pinp = pin; |
| return slot; |
| } |
| |
| static int __init |
| webbrick_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| static char irq_tab[13][5] __initdata = { |
| /*INT INTA INTB INTC INTD */ |
| { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */ |
| { -1, -1, -1, -1, -1}, /* IdSel 8 unused */ |
| { 29, 29, 29, 29, 29}, /* IdSel 9 21143 #1 */ |
| { -1, -1, -1, -1, -1}, /* IdSel 10 unused */ |
| { 30, 30, 30, 30, 30}, /* IdSel 11 21143 #2 */ |
| { -1, -1, -1, -1, -1}, /* IdSel 12 unused */ |
| { -1, -1, -1, -1, -1}, /* IdSel 13 unused */ |
| { 35, 35, 34, 33, 32}, /* IdSel 14 slot 0 */ |
| { 39, 39, 38, 37, 36}, /* IdSel 15 slot 1 */ |
| { 43, 43, 42, 41, 40}, /* IdSel 16 slot 2 */ |
| { 47, 47, 46, 45, 44}, /* IdSel 17 slot 3 */ |
| }; |
| const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5; |
| |
| return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); |
| } |
| |
| static int __init |
| clipper_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| static char irq_tab[7][5] __initdata = { |
| /*INT INTA INTB INTC INTD */ |
| { 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */ |
| { 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */ |
| { 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */ |
| { 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */ |
| { 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */ |
| { 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */ |
| { -1, -1, -1, -1, -1} /* IdSel 7 ISA Bridge */ |
| }; |
| const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5; |
| struct pci_controller *hose = dev->sysdata; |
| int irq = COMMON_TABLE_LOOKUP; |
| |
| if (irq > 0) |
| irq += 16 * hose->index; |
| |
| return isa_irq_fixup(dev, irq); |
| } |
| |
| static void __init |
| dp264_init_pci(void) |
| { |
| common_init_pci(); |
| SMC669_Init(0); |
| locate_and_init_vga(NULL); |
| } |
| |
| static void __init |
| monet_init_pci(void) |
| { |
| common_init_pci(); |
| SMC669_Init(1); |
| es1888_init(); |
| locate_and_init_vga(NULL); |
| } |
| |
| static void __init |
| clipper_init_pci(void) |
| { |
| common_init_pci(); |
| locate_and_init_vga(NULL); |
| } |
| |
| static void __init |
| webbrick_init_arch(void) |
| { |
| tsunami_init_arch(); |
| |
| /* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */ |
| hose_head->sg_isa->align_entry = 4; |
| hose_head->sg_pci->align_entry = 4; |
| } |
| |
| |
| /* |
| * The System Vectors |
| */ |
| |
| struct alpha_machine_vector dp264_mv __initmv = { |
| .vector_name = "DP264", |
| DO_EV6_MMU, |
| DO_DEFAULT_RTC, |
| DO_TSUNAMI_IO, |
| .machine_check = tsunami_machine_check, |
| .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = DEFAULT_IO_BASE, |
| .min_mem_address = DEFAULT_MEM_BASE, |
| .pci_dac_offset = TSUNAMI_DAC_OFFSET, |
| |
| .nr_irqs = 64, |
| .device_interrupt = dp264_device_interrupt, |
| |
| .init_arch = tsunami_init_arch, |
| .init_irq = dp264_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = dp264_init_pci, |
| .kill_arch = tsunami_kill_arch, |
| .pci_map_irq = dp264_map_irq, |
| .pci_swizzle = common_swizzle, |
| }; |
| ALIAS_MV(dp264) |
| |
| struct alpha_machine_vector monet_mv __initmv = { |
| .vector_name = "Monet", |
| DO_EV6_MMU, |
| DO_DEFAULT_RTC, |
| DO_TSUNAMI_IO, |
| .machine_check = tsunami_machine_check, |
| .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = DEFAULT_IO_BASE, |
| .min_mem_address = DEFAULT_MEM_BASE, |
| .pci_dac_offset = TSUNAMI_DAC_OFFSET, |
| |
| .nr_irqs = 64, |
| .device_interrupt = dp264_device_interrupt, |
| |
| .init_arch = tsunami_init_arch, |
| .init_irq = dp264_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = monet_init_pci, |
| .kill_arch = tsunami_kill_arch, |
| .pci_map_irq = monet_map_irq, |
| .pci_swizzle = monet_swizzle, |
| }; |
| |
| struct alpha_machine_vector webbrick_mv __initmv = { |
| .vector_name = "Webbrick", |
| DO_EV6_MMU, |
| DO_DEFAULT_RTC, |
| DO_TSUNAMI_IO, |
| .machine_check = tsunami_machine_check, |
| .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = DEFAULT_IO_BASE, |
| .min_mem_address = DEFAULT_MEM_BASE, |
| .pci_dac_offset = TSUNAMI_DAC_OFFSET, |
| |
| .nr_irqs = 64, |
| .device_interrupt = dp264_device_interrupt, |
| |
| .init_arch = webbrick_init_arch, |
| .init_irq = dp264_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = common_init_pci, |
| .kill_arch = tsunami_kill_arch, |
| .pci_map_irq = webbrick_map_irq, |
| .pci_swizzle = common_swizzle, |
| }; |
| |
| struct alpha_machine_vector clipper_mv __initmv = { |
| .vector_name = "Clipper", |
| DO_EV6_MMU, |
| DO_DEFAULT_RTC, |
| DO_TSUNAMI_IO, |
| .machine_check = tsunami_machine_check, |
| .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = DEFAULT_IO_BASE, |
| .min_mem_address = DEFAULT_MEM_BASE, |
| .pci_dac_offset = TSUNAMI_DAC_OFFSET, |
| |
| .nr_irqs = 64, |
| .device_interrupt = dp264_device_interrupt, |
| |
| .init_arch = tsunami_init_arch, |
| .init_irq = clipper_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = clipper_init_pci, |
| .kill_arch = tsunami_kill_arch, |
| .pci_map_irq = clipper_map_irq, |
| .pci_swizzle = common_swizzle, |
| }; |
| |
| /* Sharks strongly resemble Clipper, at least as far |
| * as interrupt routing, etc, so we're using the |
| * same functions as Clipper does |
| */ |
| |
| struct alpha_machine_vector shark_mv __initmv = { |
| .vector_name = "Shark", |
| DO_EV6_MMU, |
| DO_DEFAULT_RTC, |
| DO_TSUNAMI_IO, |
| .machine_check = tsunami_machine_check, |
| .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = DEFAULT_IO_BASE, |
| .min_mem_address = DEFAULT_MEM_BASE, |
| .pci_dac_offset = TSUNAMI_DAC_OFFSET, |
| |
| .nr_irqs = 64, |
| .device_interrupt = dp264_device_interrupt, |
| |
| .init_arch = tsunami_init_arch, |
| .init_irq = clipper_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = common_init_pci, |
| .kill_arch = tsunami_kill_arch, |
| .pci_map_irq = clipper_map_irq, |
| .pci_swizzle = common_swizzle, |
| }; |
| |
| /* No alpha_mv alias for webbrick/monet/clipper, since we compile them |
| in unconditionally with DP264; setup_arch knows how to cope. */ |
