| // SPDX-License-Identifier: GPL-2.0 |
| /* Glue code to lib/swiotlb.c */ |
| |
| #include <linux/pci.h> |
| #include <linux/cache.h> |
| #include <linux/init.h> |
| #include <linux/swiotlb.h> |
| #include <linux/bootmem.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/mem_encrypt.h> |
| |
| #include <asm/iommu.h> |
| #include <asm/swiotlb.h> |
| #include <asm/dma.h> |
| #include <asm/xen/swiotlb-xen.h> |
| #include <asm/iommu_table.h> |
| |
| int swiotlb __read_mostly; |
| |
| void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size, |
| dma_addr_t *dma_handle, gfp_t flags, |
| unsigned long attrs) |
| { |
| void *vaddr; |
| |
| /* |
| * Don't print a warning when the first allocation attempt fails. |
| * swiotlb_alloc_coherent() will print a warning when the DMA |
| * memory allocation ultimately failed. |
| */ |
| flags |= __GFP_NOWARN; |
| |
| vaddr = dma_generic_alloc_coherent(hwdev, size, dma_handle, flags, |
| attrs); |
| if (vaddr) |
| return vaddr; |
| |
| return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags); |
| } |
| |
| void x86_swiotlb_free_coherent(struct device *dev, size_t size, |
| void *vaddr, dma_addr_t dma_addr, |
| unsigned long attrs) |
| { |
| if (is_swiotlb_buffer(dma_to_phys(dev, dma_addr))) |
| swiotlb_free_coherent(dev, size, vaddr, dma_addr); |
| else |
| dma_generic_free_coherent(dev, size, vaddr, dma_addr, attrs); |
| } |
| |
| static const struct dma_map_ops swiotlb_dma_ops = { |
| .mapping_error = swiotlb_dma_mapping_error, |
| .alloc = x86_swiotlb_alloc_coherent, |
| .free = x86_swiotlb_free_coherent, |
| .sync_single_for_cpu = swiotlb_sync_single_for_cpu, |
| .sync_single_for_device = swiotlb_sync_single_for_device, |
| .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, |
| .sync_sg_for_device = swiotlb_sync_sg_for_device, |
| .map_sg = swiotlb_map_sg_attrs, |
| .unmap_sg = swiotlb_unmap_sg_attrs, |
| .map_page = swiotlb_map_page, |
| .unmap_page = swiotlb_unmap_page, |
| .dma_supported = NULL, |
| }; |
| |
| /* |
| * pci_swiotlb_detect_override - set swiotlb to 1 if necessary |
| * |
| * This returns non-zero if we are forced to use swiotlb (by the boot |
| * option). |
| */ |
| int __init pci_swiotlb_detect_override(void) |
| { |
| if (swiotlb_force == SWIOTLB_FORCE) |
| swiotlb = 1; |
| |
| return swiotlb; |
| } |
| IOMMU_INIT_FINISH(pci_swiotlb_detect_override, |
| pci_xen_swiotlb_detect, |
| pci_swiotlb_init, |
| pci_swiotlb_late_init); |
| |
| /* |
| * If 4GB or more detected (and iommu=off not set) or if SME is active |
| * then set swiotlb to 1 and return 1. |
| */ |
| int __init pci_swiotlb_detect_4gb(void) |
| { |
| /* don't initialize swiotlb if iommu=off (no_iommu=1) */ |
| #ifdef CONFIG_X86_64 |
| if (!no_iommu && max_possible_pfn > MAX_DMA32_PFN) |
| swiotlb = 1; |
| #endif |
| |
| /* |
| * If SME is active then swiotlb will be set to 1 so that bounce |
| * buffers are allocated and used for devices that do not support |
| * the addressing range required for the encryption mask. |
| */ |
| if (sme_active()) |
| swiotlb = 1; |
| |
| return swiotlb; |
| } |
| IOMMU_INIT(pci_swiotlb_detect_4gb, |
| pci_swiotlb_detect_override, |
| pci_swiotlb_init, |
| pci_swiotlb_late_init); |
| |
| void __init pci_swiotlb_init(void) |
| { |
| if (swiotlb) { |
| swiotlb_init(0); |
| dma_ops = &swiotlb_dma_ops; |
| } |
| } |
| |
| void __init pci_swiotlb_late_init(void) |
| { |
| /* An IOMMU turned us off. */ |
| if (!swiotlb) |
| swiotlb_free(); |
| else { |
| printk(KERN_INFO "PCI-DMA: " |
| "Using software bounce buffering for IO (SWIOTLB)\n"); |
| swiotlb_print_info(); |
| } |
| } |