| AM33XX MUSB GLUE | |
| - compatible : Should be "ti,musb-am33xx" | |
| - ti,hwmods : must be "usb_otg_hs" | |
| - multipoint : Should be "1" indicating the musb controller supports | |
| multipoint. This is a MUSB configuration-specific setting. | |
| - num_eps : Specifies the number of endpoints. This is also a | |
| MUSB configuration-specific setting. Should be set to "16" | |
| - ram_bits : Specifies the ram address size. Should be set to "12" | |
| - port0_mode : Should be "3" to represent OTG. "1" signifies HOST and "2" | |
| represents PERIPHERAL. | |
| - port1_mode : Should be "1" to represent HOST. "3" signifies OTG and "2" | |
| represents PERIPHERAL. | |
| - power : Should be "250". This signifies the controller can supply upto | |
| 500mA when operating in host mode. |