| /* |
| * leon_pci.c: LEON Host PCI support |
| * |
| * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom |
| * |
| * Code is partially derived from pcic.c |
| */ |
| |
| #include <linux/of_device.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/export.h> |
| #include <asm/leon.h> |
| #include <asm/leon_pci.h> |
| |
| /* The LEON architecture does not rely on a BIOS or bootloader to setup |
| * PCI for us. The Linux generic routines are used to setup resources, |
| * reset values of configuration-space register settings are preserved. |
| * |
| * PCI Memory and Prefetchable Memory is direct-mapped. However I/O Space is |
| * accessed through a Window which is translated to low 64KB in PCI space, the |
| * first 4KB is not used so 60KB is available. |
| */ |
| void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info) |
| { |
| LIST_HEAD(resources); |
| struct pci_bus *root_bus; |
| struct pci_host_bridge *bridge; |
| int ret; |
| |
| bridge = pci_alloc_host_bridge(0); |
| if (!bridge) |
| return; |
| |
| pci_add_resource_offset(&resources, &info->io_space, |
| info->io_space.start - 0x1000); |
| pci_add_resource(&resources, &info->mem_space); |
| info->busn.flags = IORESOURCE_BUS; |
| pci_add_resource(&resources, &info->busn); |
| |
| list_splice_init(&resources, &bridge->windows); |
| bridge->dev.parent = &ofdev->dev; |
| bridge->sysdata = info; |
| bridge->busnr = 0; |
| bridge->ops = info->ops; |
| bridge->swizzle_irq = pci_common_swizzle; |
| bridge->map_irq = info->map_irq; |
| |
| ret = pci_scan_root_bus_bridge(bridge); |
| if (ret) { |
| pci_free_host_bridge(bridge); |
| return; |
| } |
| |
| root_bus = bridge->bus; |
| |
| /* Assign devices with resources */ |
| pci_assign_unassigned_resources(); |
| pci_bus_add_devices(root_bus); |
| } |
| |
| void pcibios_fixup_bus(struct pci_bus *pbus) |
| { |
| struct pci_dev *dev; |
| int i, has_io, has_mem; |
| u16 cmd; |
| |
| list_for_each_entry(dev, &pbus->devices, bus_list) { |
| /* |
| * We can not rely on that the bootloader has enabled I/O |
| * or memory access to PCI devices. Instead we enable it here |
| * if the device has BARs of respective type. |
| */ |
| has_io = has_mem = 0; |
| for (i = 0; i < PCI_ROM_RESOURCE; i++) { |
| unsigned long f = dev->resource[i].flags; |
| if (f & IORESOURCE_IO) |
| has_io = 1; |
| else if (f & IORESOURCE_MEM) |
| has_mem = 1; |
| } |
| /* ROM BARs are mapped into 32-bit memory space */ |
| if (dev->resource[PCI_ROM_RESOURCE].end != 0) { |
| dev->resource[PCI_ROM_RESOURCE].flags |= |
| IORESOURCE_ROM_ENABLE; |
| has_mem = 1; |
| } |
| pci_bus_read_config_word(pbus, dev->devfn, PCI_COMMAND, &cmd); |
| if (has_io && !(cmd & PCI_COMMAND_IO)) { |
| #ifdef CONFIG_PCI_DEBUG |
| printk(KERN_INFO "LEONPCI: Enabling I/O for dev %s\n", |
| pci_name(dev)); |
| #endif |
| cmd |= PCI_COMMAND_IO; |
| pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND, |
| cmd); |
| } |
| if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) { |
| #ifdef CONFIG_PCI_DEBUG |
| printk(KERN_INFO "LEONPCI: Enabling MEMORY for dev" |
| "%s\n", pci_name(dev)); |
| #endif |
| cmd |= PCI_COMMAND_MEMORY; |
| pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND, |
| cmd); |
| } |
| } |
| } |