| /* |
| * TI QSPI driver |
| * |
| * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com |
| * Author: Sourav Poddar <sourav.poddar@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GPLv2. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/omap-dma.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| #include <linux/sizes.h> |
| |
| #include <linux/spi/spi.h> |
| |
| struct ti_qspi_regs { |
| u32 clkctrl; |
| }; |
| |
| struct ti_qspi { |
| struct completion transfer_complete; |
| |
| /* list synchronization */ |
| struct mutex list_lock; |
| |
| struct spi_master *master; |
| void __iomem *base; |
| void __iomem *mmap_base; |
| struct regmap *ctrl_base; |
| unsigned int ctrl_reg; |
| struct clk *fclk; |
| struct device *dev; |
| |
| struct ti_qspi_regs ctx_reg; |
| |
| dma_addr_t mmap_phys_base; |
| dma_addr_t rx_bb_dma_addr; |
| void *rx_bb_addr; |
| struct dma_chan *rx_chan; |
| |
| u32 spi_max_frequency; |
| u32 cmd; |
| u32 dc; |
| |
| bool mmap_enabled; |
| }; |
| |
| #define QSPI_PID (0x0) |
| #define QSPI_SYSCONFIG (0x10) |
| #define QSPI_SPI_CLOCK_CNTRL_REG (0x40) |
| #define QSPI_SPI_DC_REG (0x44) |
| #define QSPI_SPI_CMD_REG (0x48) |
| #define QSPI_SPI_STATUS_REG (0x4c) |
| #define QSPI_SPI_DATA_REG (0x50) |
| #define QSPI_SPI_SETUP_REG(n) ((0x54 + 4 * n)) |
| #define QSPI_SPI_SWITCH_REG (0x64) |
| #define QSPI_SPI_DATA_REG_1 (0x68) |
| #define QSPI_SPI_DATA_REG_2 (0x6c) |
| #define QSPI_SPI_DATA_REG_3 (0x70) |
| |
| #define QSPI_COMPLETION_TIMEOUT msecs_to_jiffies(2000) |
| |
| #define QSPI_FCLK 192000000 |
| |
| /* Clock Control */ |
| #define QSPI_CLK_EN (1 << 31) |
| #define QSPI_CLK_DIV_MAX 0xffff |
| |
| /* Command */ |
| #define QSPI_EN_CS(n) (n << 28) |
| #define QSPI_WLEN(n) ((n - 1) << 19) |
| #define QSPI_3_PIN (1 << 18) |
| #define QSPI_RD_SNGL (1 << 16) |
| #define QSPI_WR_SNGL (2 << 16) |
| #define QSPI_RD_DUAL (3 << 16) |
| #define QSPI_RD_QUAD (7 << 16) |
| #define QSPI_INVAL (4 << 16) |
| #define QSPI_FLEN(n) ((n - 1) << 0) |
| #define QSPI_WLEN_MAX_BITS 128 |
| #define QSPI_WLEN_MAX_BYTES 16 |
| #define QSPI_WLEN_MASK QSPI_WLEN(QSPI_WLEN_MAX_BITS) |
| |
| /* STATUS REGISTER */ |
| #define BUSY 0x01 |
| #define WC 0x02 |
| |
| /* Device Control */ |
| #define QSPI_DD(m, n) (m << (3 + n * 8)) |
| #define QSPI_CKPHA(n) (1 << (2 + n * 8)) |
| #define QSPI_CSPOL(n) (1 << (1 + n * 8)) |
| #define QSPI_CKPOL(n) (1 << (n * 8)) |
| |
| #define QSPI_FRAME 4096 |
| |
| #define QSPI_AUTOSUSPEND_TIMEOUT 2000 |
| |
| #define MEM_CS_EN(n) ((n + 1) << 8) |
| #define MEM_CS_MASK (7 << 8) |
| |
| #define MM_SWITCH 0x1 |
| |
| #define QSPI_SETUP_RD_NORMAL (0x0 << 12) |
| #define QSPI_SETUP_RD_DUAL (0x1 << 12) |
| #define QSPI_SETUP_RD_QUAD (0x3 << 12) |
| #define QSPI_SETUP_ADDR_SHIFT 8 |
| #define QSPI_SETUP_DUMMY_SHIFT 10 |
| |
| #define QSPI_DMA_BUFFER_SIZE SZ_64K |
| |
| static inline unsigned long ti_qspi_read(struct ti_qspi *qspi, |
| unsigned long reg) |
| { |
| return readl(qspi->base + reg); |
| } |
| |
| static inline void ti_qspi_write(struct ti_qspi *qspi, |
| unsigned long val, unsigned long reg) |
| { |
| writel(val, qspi->base + reg); |
| } |
| |
| static int ti_qspi_setup(struct spi_device *spi) |
| { |
| struct ti_qspi *qspi = spi_master_get_devdata(spi->master); |
| struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg; |
| int clk_div = 0, ret; |
| u32 clk_ctrl_reg, clk_rate, clk_mask; |
| |
| if (spi->master->busy) { |
| dev_dbg(qspi->dev, "master busy doing other transfers\n"); |
| return -EBUSY; |
| } |
| |
| if (!qspi->spi_max_frequency) { |
| dev_err(qspi->dev, "spi max frequency not defined\n"); |
| return -EINVAL; |
| } |
| |
| clk_rate = clk_get_rate(qspi->fclk); |
| |
| clk_div = DIV_ROUND_UP(clk_rate, qspi->spi_max_frequency) - 1; |
| |
| if (clk_div < 0) { |
| dev_dbg(qspi->dev, "clock divider < 0, using /1 divider\n"); |
| return -EINVAL; |
| } |
| |
| if (clk_div > QSPI_CLK_DIV_MAX) { |
| dev_dbg(qspi->dev, "clock divider >%d , using /%d divider\n", |
| QSPI_CLK_DIV_MAX, QSPI_CLK_DIV_MAX + 1); |
| return -EINVAL; |
| } |
| |
| dev_dbg(qspi->dev, "hz: %d, clock divider %d\n", |
| qspi->spi_max_frequency, clk_div); |
| |
| ret = pm_runtime_get_sync(qspi->dev); |
| if (ret < 0) { |
| dev_err(qspi->dev, "pm_runtime_get_sync() failed\n"); |
| return ret; |
| } |
| |
| clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG); |
| |
| clk_ctrl_reg &= ~QSPI_CLK_EN; |
| |
| /* disable SCLK */ |
| ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG); |
| |
| /* enable SCLK */ |
| clk_mask = QSPI_CLK_EN | clk_div; |
| ti_qspi_write(qspi, clk_mask, QSPI_SPI_CLOCK_CNTRL_REG); |
| ctx_reg->clkctrl = clk_mask; |
| |
| pm_runtime_mark_last_busy(qspi->dev); |
| ret = pm_runtime_put_autosuspend(qspi->dev); |
| if (ret < 0) { |
| dev_err(qspi->dev, "pm_runtime_put_autosuspend() failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void ti_qspi_restore_ctx(struct ti_qspi *qspi) |
| { |
| struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg; |
| |
| ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG); |
| } |
| |
| static inline u32 qspi_is_busy(struct ti_qspi *qspi) |
| { |
| u32 stat; |
| unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT; |
| |
| stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG); |
| while ((stat & BUSY) && time_after(timeout, jiffies)) { |
| cpu_relax(); |
| stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG); |
| } |
| |
| WARN(stat & BUSY, "qspi busy\n"); |
| return stat & BUSY; |
| } |
| |
| static inline int ti_qspi_poll_wc(struct ti_qspi *qspi) |
| { |
| u32 stat; |
| unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT; |
| |
| do { |
| stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG); |
| if (stat & WC) |
| return 0; |
| cpu_relax(); |
| } while (time_after(timeout, jiffies)); |
| |
| stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG); |
| if (stat & WC) |
| return 0; |
| return -ETIMEDOUT; |
| } |
| |
| static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t, |
| int count) |
| { |
| int wlen, xfer_len; |
| unsigned int cmd; |
| const u8 *txbuf; |
| u32 data; |
| |
| txbuf = t->tx_buf; |
| cmd = qspi->cmd | QSPI_WR_SNGL; |
| wlen = t->bits_per_word >> 3; /* in bytes */ |
| xfer_len = wlen; |
| |
| while (count) { |
| if (qspi_is_busy(qspi)) |
| return -EBUSY; |
| |
| switch (wlen) { |
| case 1: |
| dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n", |
| cmd, qspi->dc, *txbuf); |
| if (count >= QSPI_WLEN_MAX_BYTES) { |
| u32 *txp = (u32 *)txbuf; |
| |
| data = cpu_to_be32(*txp++); |
| writel(data, qspi->base + |
| QSPI_SPI_DATA_REG_3); |
| data = cpu_to_be32(*txp++); |
| writel(data, qspi->base + |
| QSPI_SPI_DATA_REG_2); |
| data = cpu_to_be32(*txp++); |
| writel(data, qspi->base + |
| QSPI_SPI_DATA_REG_1); |
| data = cpu_to_be32(*txp++); |
| writel(data, qspi->base + |
| QSPI_SPI_DATA_REG); |
| xfer_len = QSPI_WLEN_MAX_BYTES; |
| cmd |= QSPI_WLEN(QSPI_WLEN_MAX_BITS); |
| } else { |
| writeb(*txbuf, qspi->base + QSPI_SPI_DATA_REG); |
| cmd = qspi->cmd | QSPI_WR_SNGL; |
| xfer_len = wlen; |
| cmd |= QSPI_WLEN(wlen); |
| } |
| break; |
| case 2: |
| dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %04x\n", |
| cmd, qspi->dc, *txbuf); |
| writew(*((u16 *)txbuf), qspi->base + QSPI_SPI_DATA_REG); |
| break; |
| case 4: |
| dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %08x\n", |
| cmd, qspi->dc, *txbuf); |
| writel(*((u32 *)txbuf), qspi->base + QSPI_SPI_DATA_REG); |
| break; |
| } |
| |
| ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG); |
| if (ti_qspi_poll_wc(qspi)) { |
| dev_err(qspi->dev, "write timed out\n"); |
| return -ETIMEDOUT; |
| } |
| txbuf += xfer_len; |
| count -= xfer_len; |
| } |
| |
| return 0; |
| } |
| |
| static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t, |
| int count) |
| { |
| int wlen; |
| unsigned int cmd; |
| u8 *rxbuf; |
| |
| rxbuf = t->rx_buf; |
| cmd = qspi->cmd; |
| switch (t->rx_nbits) { |
| case SPI_NBITS_DUAL: |
| cmd |= QSPI_RD_DUAL; |
| break; |
| case SPI_NBITS_QUAD: |
| cmd |= QSPI_RD_QUAD; |
| break; |
| default: |
| cmd |= QSPI_RD_SNGL; |
| break; |
| } |
| wlen = t->bits_per_word >> 3; /* in bytes */ |
| |
| while (count) { |
| dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc); |
| if (qspi_is_busy(qspi)) |
| return -EBUSY; |
| |
| ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG); |
| if (ti_qspi_poll_wc(qspi)) { |
| dev_err(qspi->dev, "read timed out\n"); |
| return -ETIMEDOUT; |
| } |
| switch (wlen) { |
| case 1: |
| *rxbuf = readb(qspi->base + QSPI_SPI_DATA_REG); |
| break; |
| case 2: |
| *((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG); |
| break; |
| case 4: |
| *((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG); |
| break; |
| } |
| rxbuf += wlen; |
| count -= wlen; |
| } |
| |
| return 0; |
| } |
| |
| static int qspi_transfer_msg(struct ti_qspi *qspi, struct spi_transfer *t, |
| int count) |
| { |
| int ret; |
| |
| if (t->tx_buf) { |
| ret = qspi_write_msg(qspi, t, count); |
| if (ret) { |
| dev_dbg(qspi->dev, "Error while writing\n"); |
| return ret; |
| } |
| } |
| |
| if (t->rx_buf) { |
| ret = qspi_read_msg(qspi, t, count); |
| if (ret) { |
| dev_dbg(qspi->dev, "Error while reading\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void ti_qspi_dma_callback(void *param) |
| { |
| struct ti_qspi *qspi = param; |
| |
| complete(&qspi->transfer_complete); |
| } |
| |
| static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst, |
| dma_addr_t dma_src, size_t len) |
| { |
| struct dma_chan *chan = qspi->rx_chan; |
| dma_cookie_t cookie; |
| enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; |
| struct dma_async_tx_descriptor *tx; |
| int ret; |
| |
| tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags); |
| if (!tx) { |
| dev_err(qspi->dev, "device_prep_dma_memcpy error\n"); |
| return -EIO; |
| } |
| |
| tx->callback = ti_qspi_dma_callback; |
| tx->callback_param = qspi; |
| cookie = tx->tx_submit(tx); |
| reinit_completion(&qspi->transfer_complete); |
| |
| ret = dma_submit_error(cookie); |
| if (ret) { |
| dev_err(qspi->dev, "dma_submit_error %d\n", cookie); |
| return -EIO; |
| } |
| |
| dma_async_issue_pending(chan); |
| ret = wait_for_completion_timeout(&qspi->transfer_complete, |
| msecs_to_jiffies(len)); |
| if (ret <= 0) { |
| dmaengine_terminate_sync(chan); |
| dev_err(qspi->dev, "DMA wait_for_completion_timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi, |
| struct spi_flash_read_message *msg) |
| { |
| size_t readsize = msg->len; |
| void *to = msg->buf; |
| dma_addr_t dma_src = qspi->mmap_phys_base + msg->from; |
| int ret = 0; |
| |
| /* |
| * Use bounce buffer as FS like jffs2, ubifs may pass |
| * buffers that does not belong to kernel lowmem region. |
| */ |
| while (readsize != 0) { |
| size_t xfer_len = min_t(size_t, QSPI_DMA_BUFFER_SIZE, |
| readsize); |
| |
| ret = ti_qspi_dma_xfer(qspi, qspi->rx_bb_dma_addr, |
| dma_src, xfer_len); |
| if (ret != 0) |
| return ret; |
| memcpy(to, qspi->rx_bb_addr, xfer_len); |
| readsize -= xfer_len; |
| dma_src += xfer_len; |
| to += xfer_len; |
| } |
| |
| return ret; |
| } |
| |
| static int ti_qspi_dma_xfer_sg(struct ti_qspi *qspi, struct sg_table rx_sg, |
| loff_t from) |
| { |
| struct scatterlist *sg; |
| dma_addr_t dma_src = qspi->mmap_phys_base + from; |
| dma_addr_t dma_dst; |
| int i, len, ret; |
| |
| for_each_sg(rx_sg.sgl, sg, rx_sg.nents, i) { |
| dma_dst = sg_dma_address(sg); |
| len = sg_dma_len(sg); |
| ret = ti_qspi_dma_xfer(qspi, dma_dst, dma_src, len); |
| if (ret) |
| return ret; |
| dma_src += len; |
| } |
| |
| return 0; |
| } |
| |
| static void ti_qspi_enable_memory_map(struct spi_device *spi) |
| { |
| struct ti_qspi *qspi = spi_master_get_devdata(spi->master); |
| |
| ti_qspi_write(qspi, MM_SWITCH, QSPI_SPI_SWITCH_REG); |
| if (qspi->ctrl_base) { |
| regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg, |
| MEM_CS_EN(spi->chip_select), |
| MEM_CS_MASK); |
| } |
| qspi->mmap_enabled = true; |
| } |
| |
| static void ti_qspi_disable_memory_map(struct spi_device *spi) |
| { |
| struct ti_qspi *qspi = spi_master_get_devdata(spi->master); |
| |
| ti_qspi_write(qspi, 0, QSPI_SPI_SWITCH_REG); |
| if (qspi->ctrl_base) |
| regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg, |
| 0, MEM_CS_MASK); |
| qspi->mmap_enabled = false; |
| } |
| |
| static void ti_qspi_setup_mmap_read(struct spi_device *spi, |
| struct spi_flash_read_message *msg) |
| { |
| struct ti_qspi *qspi = spi_master_get_devdata(spi->master); |
| u32 memval = msg->read_opcode; |
| |
| switch (msg->data_nbits) { |
| case SPI_NBITS_QUAD: |
| memval |= QSPI_SETUP_RD_QUAD; |
| break; |
| case SPI_NBITS_DUAL: |
| memval |= QSPI_SETUP_RD_DUAL; |
| break; |
| default: |
| memval |= QSPI_SETUP_RD_NORMAL; |
| break; |
| } |
| memval |= ((msg->addr_width - 1) << QSPI_SETUP_ADDR_SHIFT | |
| msg->dummy_bytes << QSPI_SETUP_DUMMY_SHIFT); |
| ti_qspi_write(qspi, memval, |
| QSPI_SPI_SETUP_REG(spi->chip_select)); |
| } |
| |
| static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi, |
| struct spi_flash_read_message *msg) |
| { |
| return virt_addr_valid(msg->buf); |
| } |
| |
| static int ti_qspi_spi_flash_read(struct spi_device *spi, |
| struct spi_flash_read_message *msg) |
| { |
| struct ti_qspi *qspi = spi_master_get_devdata(spi->master); |
| int ret = 0; |
| |
| mutex_lock(&qspi->list_lock); |
| |
| if (!qspi->mmap_enabled) |
| ti_qspi_enable_memory_map(spi); |
| ti_qspi_setup_mmap_read(spi, msg); |
| |
| if (qspi->rx_chan) { |
| if (msg->cur_msg_mapped) |
| ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from); |
| else |
| ret = ti_qspi_dma_bounce_buffer(qspi, msg); |
| if (ret) |
| goto err_unlock; |
| } else { |
| memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len); |
| } |
| msg->retlen = msg->len; |
| |
| err_unlock: |
| mutex_unlock(&qspi->list_lock); |
| |
| return ret; |
| } |
| |
| static int ti_qspi_start_transfer_one(struct spi_master *master, |
| struct spi_message *m) |
| { |
| struct ti_qspi *qspi = spi_master_get_devdata(master); |
| struct spi_device *spi = m->spi; |
| struct spi_transfer *t; |
| int status = 0, ret; |
| unsigned int frame_len_words, transfer_len_words; |
| int wlen; |
| |
| /* setup device control reg */ |
| qspi->dc = 0; |
| |
| if (spi->mode & SPI_CPHA) |
| qspi->dc |= QSPI_CKPHA(spi->chip_select); |
| if (spi->mode & SPI_CPOL) |
| qspi->dc |= QSPI_CKPOL(spi->chip_select); |
| if (spi->mode & SPI_CS_HIGH) |
| qspi->dc |= QSPI_CSPOL(spi->chip_select); |
| |
| frame_len_words = 0; |
| list_for_each_entry(t, &m->transfers, transfer_list) |
| frame_len_words += t->len / (t->bits_per_word >> 3); |
| frame_len_words = min_t(unsigned int, frame_len_words, QSPI_FRAME); |
| |
| /* setup command reg */ |
| qspi->cmd = 0; |
| qspi->cmd |= QSPI_EN_CS(spi->chip_select); |
| qspi->cmd |= QSPI_FLEN(frame_len_words); |
| |
| ti_qspi_write(qspi, qspi->dc, QSPI_SPI_DC_REG); |
| |
| mutex_lock(&qspi->list_lock); |
| |
| if (qspi->mmap_enabled) |
| ti_qspi_disable_memory_map(spi); |
| |
| list_for_each_entry(t, &m->transfers, transfer_list) { |
| qspi->cmd = ((qspi->cmd & ~QSPI_WLEN_MASK) | |
| QSPI_WLEN(t->bits_per_word)); |
| |
| wlen = t->bits_per_word >> 3; |
| transfer_len_words = min(t->len / wlen, frame_len_words); |
| |
| ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen); |
| if (ret) { |
| dev_dbg(qspi->dev, "transfer message failed\n"); |
| mutex_unlock(&qspi->list_lock); |
| return -EINVAL; |
| } |
| |
| m->actual_length += transfer_len_words * wlen; |
| frame_len_words -= transfer_len_words; |
| if (frame_len_words == 0) |
| break; |
| } |
| |
| mutex_unlock(&qspi->list_lock); |
| |
| ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG); |
| m->status = status; |
| spi_finalize_current_message(master); |
| |
| return status; |
| } |
| |
| static int ti_qspi_runtime_resume(struct device *dev) |
| { |
| struct ti_qspi *qspi; |
| |
| qspi = dev_get_drvdata(dev); |
| ti_qspi_restore_ctx(qspi); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ti_qspi_match[] = { |
| {.compatible = "ti,dra7xxx-qspi" }, |
| {.compatible = "ti,am4372-qspi" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ti_qspi_match); |
| |
| static int ti_qspi_probe(struct platform_device *pdev) |
| { |
| struct ti_qspi *qspi; |
| struct spi_master *master; |
| struct resource *r, *res_mmap; |
| struct device_node *np = pdev->dev.of_node; |
| u32 max_freq; |
| int ret = 0, num_cs, irq; |
| dma_cap_mask_t mask; |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(*qspi)); |
| if (!master) |
| return -ENOMEM; |
| |
| master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD; |
| |
| master->flags = SPI_MASTER_HALF_DUPLEX; |
| master->setup = ti_qspi_setup; |
| master->auto_runtime_pm = true; |
| master->transfer_one_message = ti_qspi_start_transfer_one; |
| master->dev.of_node = pdev->dev.of_node; |
| master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) | |
| SPI_BPW_MASK(8); |
| master->spi_flash_read = ti_qspi_spi_flash_read; |
| |
| if (!of_property_read_u32(np, "num-cs", &num_cs)) |
| master->num_chipselect = num_cs; |
| |
| qspi = spi_master_get_devdata(master); |
| qspi->master = master; |
| qspi->dev = &pdev->dev; |
| platform_set_drvdata(pdev, qspi); |
| |
| r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_base"); |
| if (r == NULL) { |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (r == NULL) { |
| dev_err(&pdev->dev, "missing platform data\n"); |
| ret = -ENODEV; |
| goto free_master; |
| } |
| } |
| |
| res_mmap = platform_get_resource_byname(pdev, |
| IORESOURCE_MEM, "qspi_mmap"); |
| if (res_mmap == NULL) { |
| res_mmap = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (res_mmap == NULL) { |
| dev_err(&pdev->dev, |
| "memory mapped resource not required\n"); |
| } |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "no irq resource?\n"); |
| ret = irq; |
| goto free_master; |
| } |
| |
| mutex_init(&qspi->list_lock); |
| |
| qspi->base = devm_ioremap_resource(&pdev->dev, r); |
| if (IS_ERR(qspi->base)) { |
| ret = PTR_ERR(qspi->base); |
| goto free_master; |
| } |
| |
| |
| if (of_property_read_bool(np, "syscon-chipselects")) { |
| qspi->ctrl_base = |
| syscon_regmap_lookup_by_phandle(np, |
| "syscon-chipselects"); |
| if (IS_ERR(qspi->ctrl_base)) { |
| ret = PTR_ERR(qspi->ctrl_base); |
| goto free_master; |
| } |
| ret = of_property_read_u32_index(np, |
| "syscon-chipselects", |
| 1, &qspi->ctrl_reg); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "couldn't get ctrl_mod reg index\n"); |
| goto free_master; |
| } |
| } |
| |
| qspi->fclk = devm_clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(qspi->fclk)) { |
| ret = PTR_ERR(qspi->fclk); |
| dev_err(&pdev->dev, "could not get clk: %d\n", ret); |
| } |
| |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_set_autosuspend_delay(&pdev->dev, QSPI_AUTOSUSPEND_TIMEOUT); |
| pm_runtime_enable(&pdev->dev); |
| |
| if (!of_property_read_u32(np, "spi-max-frequency", &max_freq)) |
| qspi->spi_max_frequency = max_freq; |
| |
| dma_cap_zero(mask); |
| dma_cap_set(DMA_MEMCPY, mask); |
| |
| qspi->rx_chan = dma_request_chan_by_mask(&mask); |
| if (IS_ERR(qspi->rx_chan)) { |
| dev_err(qspi->dev, |
| "No Rx DMA available, trying mmap mode\n"); |
| qspi->rx_chan = NULL; |
| ret = 0; |
| goto no_dma; |
| } |
| qspi->rx_bb_addr = dma_alloc_coherent(qspi->dev, |
| QSPI_DMA_BUFFER_SIZE, |
| &qspi->rx_bb_dma_addr, |
| GFP_KERNEL | GFP_DMA); |
| if (!qspi->rx_bb_addr) { |
| dev_err(qspi->dev, |
| "dma_alloc_coherent failed, using PIO mode\n"); |
| dma_release_channel(qspi->rx_chan); |
| goto no_dma; |
| } |
| master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma; |
| master->dma_rx = qspi->rx_chan; |
| init_completion(&qspi->transfer_complete); |
| if (res_mmap) |
| qspi->mmap_phys_base = (dma_addr_t)res_mmap->start; |
| |
| no_dma: |
| if (!qspi->rx_chan && res_mmap) { |
| qspi->mmap_base = devm_ioremap_resource(&pdev->dev, res_mmap); |
| if (IS_ERR(qspi->mmap_base)) { |
| dev_info(&pdev->dev, |
| "mmap failed with error %ld using PIO mode\n", |
| PTR_ERR(qspi->mmap_base)); |
| qspi->mmap_base = NULL; |
| master->spi_flash_read = NULL; |
| } |
| } |
| qspi->mmap_enabled = false; |
| |
| ret = devm_spi_register_master(&pdev->dev, master); |
| if (!ret) |
| return 0; |
| |
| pm_runtime_disable(&pdev->dev); |
| free_master: |
| spi_master_put(master); |
| return ret; |
| } |
| |
| static int ti_qspi_remove(struct platform_device *pdev) |
| { |
| struct ti_qspi *qspi = platform_get_drvdata(pdev); |
| int rc; |
| |
| rc = spi_master_suspend(qspi->master); |
| if (rc) |
| return rc; |
| |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| if (qspi->rx_bb_addr) |
| dma_free_coherent(qspi->dev, QSPI_DMA_BUFFER_SIZE, |
| qspi->rx_bb_addr, |
| qspi->rx_bb_dma_addr); |
| if (qspi->rx_chan) |
| dma_release_channel(qspi->rx_chan); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops ti_qspi_pm_ops = { |
| .runtime_resume = ti_qspi_runtime_resume, |
| }; |
| |
| static struct platform_driver ti_qspi_driver = { |
| .probe = ti_qspi_probe, |
| .remove = ti_qspi_remove, |
| .driver = { |
| .name = "ti-qspi", |
| .pm = &ti_qspi_pm_ops, |
| .of_match_table = ti_qspi_match, |
| } |
| }; |
| |
| module_platform_driver(ti_qspi_driver); |
| |
| MODULE_AUTHOR("Sourav Poddar <sourav.poddar@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("TI QSPI controller driver"); |
| MODULE_ALIAS("platform:ti-qspi"); |