| /* | 
 |   USB Driver for GSM modems | 
 |  | 
 |   Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de> | 
 |  | 
 |   This driver is free software; you can redistribute it and/or modify | 
 |   it under the terms of Version 2 of the GNU General Public License as | 
 |   published by the Free Software Foundation. | 
 |  | 
 |   Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> | 
 |  | 
 |   History: see the git log. | 
 |  | 
 |   Work sponsored by: Sigos GmbH, Germany <info@sigos.de> | 
 |  | 
 |   This driver exists because the "normal" serial driver doesn't work too well | 
 |   with GSM modems. Issues: | 
 |   - data loss -- one single Receive URB is not nearly enough | 
 |   - nonstandard flow (Option devices) control | 
 |   - controlling the baud rate doesn't make sense | 
 |  | 
 |   This driver is named "option" because the most common device it's | 
 |   used for is a PC-Card (with an internal OHCI-USB interface, behind | 
 |   which the GSM interface sits), made by Option Inc. | 
 |  | 
 |   Some of the "one port" devices actually exhibit multiple USB instances | 
 |   on the USB bus. This is not a bug, these ports are used for different | 
 |   device features. | 
 | */ | 
 |  | 
 | #define DRIVER_VERSION "v0.7.2" | 
 | #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" | 
 | #define DRIVER_DESC "USB Driver for GSM modems" | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/tty.h> | 
 | #include <linux/tty_flip.h> | 
 | #include <linux/module.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/usb/serial.h> | 
 |  | 
 | /* Function prototypes */ | 
 | static int  option_open(struct tty_struct *tty, struct usb_serial_port *port, | 
 | 							struct file *filp); | 
 | static void option_close(struct tty_struct *tty, struct usb_serial_port *port, | 
 | 							struct file *filp); | 
 | static int  option_startup(struct usb_serial *serial); | 
 | static void option_shutdown(struct usb_serial *serial); | 
 | static int  option_write_room(struct tty_struct *tty); | 
 |  | 
 | static void option_instat_callback(struct urb *urb); | 
 |  | 
 | static int option_write(struct tty_struct *tty, struct usb_serial_port *port, | 
 | 			const unsigned char *buf, int count); | 
 | static int  option_chars_in_buffer(struct tty_struct *tty); | 
 | static void option_set_termios(struct tty_struct *tty, | 
 | 			struct usb_serial_port *port, struct ktermios *old); | 
 | static int  option_tiocmget(struct tty_struct *tty, struct file *file); | 
 | static int  option_tiocmset(struct tty_struct *tty, struct file *file, | 
 | 				unsigned int set, unsigned int clear); | 
 | static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *port); | 
 |  | 
 | /* Vendor and product IDs */ | 
 | #define OPTION_VENDOR_ID			0x0AF0 | 
 | #define OPTION_PRODUCT_COLT			0x5000 | 
 | #define OPTION_PRODUCT_RICOLA			0x6000 | 
 | #define OPTION_PRODUCT_RICOLA_LIGHT		0x6100 | 
 | #define OPTION_PRODUCT_RICOLA_QUAD		0x6200 | 
 | #define OPTION_PRODUCT_RICOLA_QUAD_LIGHT	0x6300 | 
 | #define OPTION_PRODUCT_RICOLA_NDIS		0x6050 | 
 | #define OPTION_PRODUCT_RICOLA_NDIS_LIGHT	0x6150 | 
 | #define OPTION_PRODUCT_RICOLA_NDIS_QUAD		0x6250 | 
 | #define OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT	0x6350 | 
 | #define OPTION_PRODUCT_COBRA			0x6500 | 
 | #define OPTION_PRODUCT_COBRA_BUS		0x6501 | 
 | #define OPTION_PRODUCT_VIPER			0x6600 | 
 | #define OPTION_PRODUCT_VIPER_BUS		0x6601 | 
 | #define OPTION_PRODUCT_GT_MAX_READY		0x6701 | 
 | #define OPTION_PRODUCT_FUJI_MODEM_LIGHT		0x6721 | 
 | #define OPTION_PRODUCT_FUJI_MODEM_GT		0x6741 | 
 | #define OPTION_PRODUCT_FUJI_MODEM_EX		0x6761 | 
 | #define OPTION_PRODUCT_KOI_MODEM		0x6800 | 
 | #define OPTION_PRODUCT_SCORPION_MODEM		0x6901 | 
 | #define OPTION_PRODUCT_ETNA_MODEM		0x7001 | 
 | #define OPTION_PRODUCT_ETNA_MODEM_LITE		0x7021 | 
 | #define OPTION_PRODUCT_ETNA_MODEM_GT		0x7041 | 
 | #define OPTION_PRODUCT_ETNA_MODEM_EX		0x7061 | 
 | #define OPTION_PRODUCT_ETNA_KOI_MODEM		0x7100 | 
 |  | 
 | #define HUAWEI_VENDOR_ID			0x12D1 | 
 | #define HUAWEI_PRODUCT_E600			0x1001 | 
 | #define HUAWEI_PRODUCT_E220			0x1003 | 
 | #define HUAWEI_PRODUCT_E220BIS			0x1004 | 
 | #define HUAWEI_PRODUCT_E1401			0x1401 | 
 | #define HUAWEI_PRODUCT_E1403			0x1403 | 
 | #define HUAWEI_PRODUCT_E1405			0x1405 | 
 | #define HUAWEI_PRODUCT_E1406			0x1406 | 
 | #define HUAWEI_PRODUCT_E1408			0x1408 | 
 | #define HUAWEI_PRODUCT_E1409			0x1409 | 
 | #define HUAWEI_PRODUCT_E1410			0x1410 | 
 | #define HUAWEI_PRODUCT_E1411			0x1411 | 
 | #define HUAWEI_PRODUCT_E1412			0x1412 | 
 | #define HUAWEI_PRODUCT_E1413			0x1413 | 
 | #define HUAWEI_PRODUCT_E1414			0x1414 | 
 | #define HUAWEI_PRODUCT_E1415			0x1415 | 
 | #define HUAWEI_PRODUCT_E1416			0x1416 | 
 | #define HUAWEI_PRODUCT_E1417			0x1417 | 
 | #define HUAWEI_PRODUCT_E1418			0x1418 | 
 | #define HUAWEI_PRODUCT_E1419			0x1419 | 
 |  | 
 | #define NOVATELWIRELESS_VENDOR_ID		0x1410 | 
 |  | 
 | /* MERLIN EVDO PRODUCTS */ | 
 | #define NOVATELWIRELESS_PRODUCT_V640		0x1100 | 
 | #define NOVATELWIRELESS_PRODUCT_V620		0x1110 | 
 | #define NOVATELWIRELESS_PRODUCT_V740		0x1120 | 
 | #define NOVATELWIRELESS_PRODUCT_V720		0x1130 | 
 |  | 
 | /* MERLIN HSDPA/HSPA PRODUCTS */ | 
 | #define NOVATELWIRELESS_PRODUCT_U730		0x1400 | 
 | #define NOVATELWIRELESS_PRODUCT_U740		0x1410 | 
 | #define NOVATELWIRELESS_PRODUCT_U870		0x1420 | 
 | #define NOVATELWIRELESS_PRODUCT_XU870		0x1430 | 
 | #define NOVATELWIRELESS_PRODUCT_X950D		0x1450 | 
 |  | 
 | /* EXPEDITE PRODUCTS */ | 
 | #define NOVATELWIRELESS_PRODUCT_EV620		0x2100 | 
 | #define NOVATELWIRELESS_PRODUCT_ES720		0x2110 | 
 | #define NOVATELWIRELESS_PRODUCT_E725		0x2120 | 
 | #define NOVATELWIRELESS_PRODUCT_ES620		0x2130 | 
 | #define NOVATELWIRELESS_PRODUCT_EU730		0x2400 | 
 | #define NOVATELWIRELESS_PRODUCT_EU740		0x2410 | 
 | #define NOVATELWIRELESS_PRODUCT_EU870D		0x2420 | 
 |  | 
 | /* OVATION PRODUCTS */ | 
 | #define NOVATELWIRELESS_PRODUCT_MC727		0x4100 | 
 | #define NOVATELWIRELESS_PRODUCT_MC950D		0x4400 | 
 |  | 
 | /* FUTURE NOVATEL PRODUCTS */ | 
 | #define NOVATELWIRELESS_PRODUCT_EVDO_1		0x6000 | 
 | #define NOVATELWIRELESS_PRODUCT_HSPA_1		0x7000 | 
 | #define NOVATELWIRELESS_PRODUCT_EMBEDDED_1	0x8000 | 
 | #define NOVATELWIRELESS_PRODUCT_GLOBAL_1	0x9000 | 
 | #define NOVATELWIRELESS_PRODUCT_EVDO_2		0x6001 | 
 | #define NOVATELWIRELESS_PRODUCT_HSPA_2		0x7001 | 
 | #define NOVATELWIRELESS_PRODUCT_EMBEDDED_2	0x8001 | 
 | #define NOVATELWIRELESS_PRODUCT_GLOBAL_2	0x9001 | 
 |  | 
 | /* AMOI PRODUCTS */ | 
 | #define AMOI_VENDOR_ID				0x1614 | 
 | #define AMOI_PRODUCT_H01			0x0800 | 
 | #define AMOI_PRODUCT_H01A			0x7002 | 
 | #define AMOI_PRODUCT_H02			0x0802 | 
 |  | 
 | #define DELL_VENDOR_ID				0x413C | 
 |  | 
 | #define KYOCERA_VENDOR_ID			0x0c88 | 
 | #define KYOCERA_PRODUCT_KPC650			0x17da | 
 | #define KYOCERA_PRODUCT_KPC680			0x180a | 
 |  | 
 | #define ANYDATA_VENDOR_ID			0x16d5 | 
 | #define ANYDATA_PRODUCT_ADU_620UW		0x6202 | 
 | #define ANYDATA_PRODUCT_ADU_E100A		0x6501 | 
 | #define ANYDATA_PRODUCT_ADU_500A		0x6502 | 
 |  | 
 | #define AXESSTEL_VENDOR_ID			0x1726 | 
 | #define AXESSTEL_PRODUCT_MV110H			0x1000 | 
 |  | 
 | #define ONDA_VENDOR_ID				0x19d2 | 
 | #define ONDA_PRODUCT_MSA501HS			0x0001 | 
 | #define ONDA_PRODUCT_ET502HS			0x0002 | 
 |  | 
 | #define BANDRICH_VENDOR_ID			0x1A8D | 
 | #define BANDRICH_PRODUCT_C100_1			0x1002 | 
 | #define BANDRICH_PRODUCT_C100_2			0x1003 | 
 | #define BANDRICH_PRODUCT_1004			0x1004 | 
 | #define BANDRICH_PRODUCT_1005			0x1005 | 
 | #define BANDRICH_PRODUCT_1006			0x1006 | 
 | #define BANDRICH_PRODUCT_1007			0x1007 | 
 | #define BANDRICH_PRODUCT_1008			0x1008 | 
 | #define BANDRICH_PRODUCT_1009			0x1009 | 
 | #define BANDRICH_PRODUCT_100A			0x100a | 
 |  | 
 | #define BANDRICH_PRODUCT_100B			0x100b | 
 | #define BANDRICH_PRODUCT_100C			0x100c | 
 | #define BANDRICH_PRODUCT_100D			0x100d | 
 | #define BANDRICH_PRODUCT_100E			0x100e | 
 |  | 
 | #define BANDRICH_PRODUCT_100F			0x100f | 
 | #define BANDRICH_PRODUCT_1010			0x1010 | 
 | #define BANDRICH_PRODUCT_1011			0x1011 | 
 | #define BANDRICH_PRODUCT_1012			0x1012 | 
 |  | 
 | #define AMOI_VENDOR_ID			0x1614 | 
 | #define AMOI_PRODUCT_9508			0x0800 | 
 |  | 
 | #define QUALCOMM_VENDOR_ID			0x05C6 | 
 |  | 
 | #define MAXON_VENDOR_ID				0x16d8 | 
 |  | 
 | #define TELIT_VENDOR_ID				0x1bc7 | 
 | #define TELIT_PRODUCT_UC864E			0x1003 | 
 |  | 
 | /* ZTE PRODUCTS */ | 
 | #define ZTE_VENDOR_ID				0x19d2 | 
 | #define ZTE_PRODUCT_MF628			0x0015 | 
 | #define ZTE_PRODUCT_CDMA_TECH			0xfffe | 
 |  | 
 | /* Ericsson products */ | 
 | #define ERICSSON_VENDOR_ID			0x0bdb | 
 | #define ERICSSON_PRODUCT_F3507G			0x1900 | 
 |  | 
 | /* Pantech products */ | 
 | #define PANTECH_VENDOR_ID			0x106c | 
 | #define PANTECH_PRODUCT_PC5740			0x3701 | 
 | #define PANTECH_PRODUCT_PC5750			0x3702  /* PX-500 */ | 
 | #define PANTECH_PRODUCT_UM150			0x3711 | 
 |  | 
 | static struct usb_device_id option_ids[] = { | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD_LIGHT) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_LIGHT) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA_BUS) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER_BUS) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX_READY) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_LIGHT) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_GT) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_EX) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_MODEM) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_MODEM) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_LITE) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) }, | 
 | 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) }, | 
 | 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V720) }, /* Novatel Merlin V720/S720/PC720 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U730) }, /* Novatel U730/U740 (VF version) */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U740) }, /* Novatel U740 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U870) }, /* Novatel U870 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_XU870) }, /* Novatel Merlin XU870 HSDPA/3G */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_X950D) }, /* Novatel X950D */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) }, /* Novatel EV620/ES620 CDMA/EV-DO */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) }, /* Novatel ES620/ES720/U720/USB720 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) }, /* Novatel E725/E726 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES620) }, /* Novatel Merlin ES620 SM Bus */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) }, /* Novatel EU730 and Vodafone EU740 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) }, /* Novatel non-Vodafone EU740 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_1) }, /* Novatel Global product */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_2) }, /* Novatel EVDO product */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_2) }, /* Novatel HSPA product */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */ | 
 | 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */ | 
 |  | 
 | 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, | 
 | 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, | 
 | 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) }, | 
 |  | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8114) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8115) },	/* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8116) },	/* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8117) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8118) },	/* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8128) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8129) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8133) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8136) },	/* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8137) },	/* Dell Wireless HSDPA 5520 */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8138) },	/* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ | 
 | 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8147) },	/* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */ | 
 | 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */ | 
 | 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, | 
 | 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, | 
 | 	{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, | 
 | 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, | 
 | 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011) }, | 
 | 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012) }, | 
 | 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, | 
 | 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, | 
 | 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ | 
 | 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ | 
 | 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ | 
 | 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, | 
 | 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, | 
 | 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, | 
 | 	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, | 
 | 	{ USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5740) }, | 
 | 	{ USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5750) }, | 
 | 	{ USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_UM150) }, | 
 | 	{ } /* Terminating entry */ | 
 | }; | 
 | MODULE_DEVICE_TABLE(usb, option_ids); | 
 |  | 
 | static struct usb_driver option_driver = { | 
 | 	.name       = "option", | 
 | 	.probe      = usb_serial_probe, | 
 | 	.disconnect = usb_serial_disconnect, | 
 | 	.id_table   = option_ids, | 
 | 	.no_dynamic_id = 	1, | 
 | }; | 
 |  | 
 | /* The card has three separate interfaces, which the serial driver | 
 |  * recognizes separately, thus num_port=1. | 
 |  */ | 
 |  | 
 | static struct usb_serial_driver option_1port_device = { | 
 | 	.driver = { | 
 | 		.owner =	THIS_MODULE, | 
 | 		.name =		"option1", | 
 | 	}, | 
 | 	.description       = "GSM modem (1-port)", | 
 | 	.usb_driver        = &option_driver, | 
 | 	.id_table          = option_ids, | 
 | 	.num_ports         = 1, | 
 | 	.open              = option_open, | 
 | 	.close             = option_close, | 
 | 	.write             = option_write, | 
 | 	.write_room        = option_write_room, | 
 | 	.chars_in_buffer   = option_chars_in_buffer, | 
 | 	.set_termios       = option_set_termios, | 
 | 	.tiocmget          = option_tiocmget, | 
 | 	.tiocmset          = option_tiocmset, | 
 | 	.attach            = option_startup, | 
 | 	.shutdown          = option_shutdown, | 
 | 	.read_int_callback = option_instat_callback, | 
 | }; | 
 |  | 
 | static int debug; | 
 |  | 
 | /* per port private data */ | 
 |  | 
 | #define N_IN_URB 4 | 
 | #define N_OUT_URB 1 | 
 | #define IN_BUFLEN 4096 | 
 | #define OUT_BUFLEN 128 | 
 |  | 
 | struct option_port_private { | 
 | 	/* Input endpoints and buffer for this port */ | 
 | 	struct urb *in_urbs[N_IN_URB]; | 
 | 	u8 *in_buffer[N_IN_URB]; | 
 | 	/* Output endpoints and buffer for this port */ | 
 | 	struct urb *out_urbs[N_OUT_URB]; | 
 | 	u8 *out_buffer[N_OUT_URB]; | 
 | 	unsigned long out_busy;		/* Bit vector of URBs in use */ | 
 |  | 
 | 	/* Settings for the port */ | 
 | 	int rts_state;	/* Handshaking pins (outputs) */ | 
 | 	int dtr_state; | 
 | 	int cts_state;	/* Handshaking pins (inputs) */ | 
 | 	int dsr_state; | 
 | 	int dcd_state; | 
 | 	int ri_state; | 
 |  | 
 | 	unsigned long tx_start_time[N_OUT_URB]; | 
 | }; | 
 |  | 
 | /* Functions used by new usb-serial code. */ | 
 | static int __init option_init(void) | 
 | { | 
 | 	int retval; | 
 | 	retval = usb_serial_register(&option_1port_device); | 
 | 	if (retval) | 
 | 		goto failed_1port_device_register; | 
 | 	retval = usb_register(&option_driver); | 
 | 	if (retval) | 
 | 		goto failed_driver_register; | 
 |  | 
 | 	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" | 
 | 	       DRIVER_DESC "\n"); | 
 |  | 
 | 	return 0; | 
 |  | 
 | failed_driver_register: | 
 | 	usb_serial_deregister(&option_1port_device); | 
 | failed_1port_device_register: | 
 | 	return retval; | 
 | } | 
 |  | 
 | static void __exit option_exit(void) | 
 | { | 
 | 	usb_deregister(&option_driver); | 
 | 	usb_serial_deregister(&option_1port_device); | 
 | } | 
 |  | 
 | module_init(option_init); | 
 | module_exit(option_exit); | 
 |  | 
 | static void option_set_termios(struct tty_struct *tty, | 
 | 		struct usb_serial_port *port, struct ktermios *old_termios) | 
 | { | 
 | 	dbg("%s", __func__); | 
 | 	/* Doesn't support option setting */ | 
 | 	tty_termios_copy_hw(tty->termios, old_termios); | 
 | 	option_send_setup(tty, port); | 
 | } | 
 |  | 
 | static int option_tiocmget(struct tty_struct *tty, struct file *file) | 
 | { | 
 | 	struct usb_serial_port *port = tty->driver_data; | 
 | 	unsigned int value; | 
 | 	struct option_port_private *portdata; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	value = ((portdata->rts_state) ? TIOCM_RTS : 0) | | 
 | 		((portdata->dtr_state) ? TIOCM_DTR : 0) | | 
 | 		((portdata->cts_state) ? TIOCM_CTS : 0) | | 
 | 		((portdata->dsr_state) ? TIOCM_DSR : 0) | | 
 | 		((portdata->dcd_state) ? TIOCM_CAR : 0) | | 
 | 		((portdata->ri_state) ? TIOCM_RNG : 0); | 
 |  | 
 | 	return value; | 
 | } | 
 |  | 
 | static int option_tiocmset(struct tty_struct *tty, struct file *file, | 
 | 			unsigned int set, unsigned int clear) | 
 | { | 
 | 	struct usb_serial_port *port = tty->driver_data; | 
 | 	struct option_port_private *portdata; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	/* FIXME: what locks portdata fields ? */ | 
 | 	if (set & TIOCM_RTS) | 
 | 		portdata->rts_state = 1; | 
 | 	if (set & TIOCM_DTR) | 
 | 		portdata->dtr_state = 1; | 
 |  | 
 | 	if (clear & TIOCM_RTS) | 
 | 		portdata->rts_state = 0; | 
 | 	if (clear & TIOCM_DTR) | 
 | 		portdata->dtr_state = 0; | 
 | 	return option_send_setup(tty, port); | 
 | } | 
 |  | 
 | /* Write */ | 
 | static int option_write(struct tty_struct *tty, struct usb_serial_port *port, | 
 | 			const unsigned char *buf, int count) | 
 | { | 
 | 	struct option_port_private *portdata; | 
 | 	int i; | 
 | 	int left, todo; | 
 | 	struct urb *this_urb = NULL; /* spurious */ | 
 | 	int err; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	dbg("%s: write (%d chars)", __func__, count); | 
 |  | 
 | 	i = 0; | 
 | 	left = count; | 
 | 	for (i = 0; left > 0 && i < N_OUT_URB; i++) { | 
 | 		todo = left; | 
 | 		if (todo > OUT_BUFLEN) | 
 | 			todo = OUT_BUFLEN; | 
 |  | 
 | 		this_urb = portdata->out_urbs[i]; | 
 | 		if (test_and_set_bit(i, &portdata->out_busy)) { | 
 | 			if (time_before(jiffies, | 
 | 					portdata->tx_start_time[i] + 10 * HZ)) | 
 | 				continue; | 
 | 			usb_unlink_urb(this_urb); | 
 | 			continue; | 
 | 		} | 
 | 		if (this_urb->status != 0) | 
 | 			dbg("usb_write %p failed (err=%d)", | 
 | 				this_urb, this_urb->status); | 
 |  | 
 | 		dbg("%s: endpoint %d buf %d", __func__, | 
 | 			usb_pipeendpoint(this_urb->pipe), i); | 
 |  | 
 | 		/* send the data */ | 
 | 		memcpy(this_urb->transfer_buffer, buf, todo); | 
 | 		this_urb->transfer_buffer_length = todo; | 
 |  | 
 | 		this_urb->dev = port->serial->dev; | 
 | 		err = usb_submit_urb(this_urb, GFP_ATOMIC); | 
 | 		if (err) { | 
 | 			dbg("usb_submit_urb %p (write bulk) failed " | 
 | 				"(%d, has %d)", this_urb, | 
 | 				err, this_urb->status); | 
 | 			clear_bit(i, &portdata->out_busy); | 
 | 			continue; | 
 | 		} | 
 | 		portdata->tx_start_time[i] = jiffies; | 
 | 		buf += todo; | 
 | 		left -= todo; | 
 | 	} | 
 |  | 
 | 	count -= left; | 
 | 	dbg("%s: wrote (did %d)", __func__, count); | 
 | 	return count; | 
 | } | 
 |  | 
 | static void option_indat_callback(struct urb *urb) | 
 | { | 
 | 	int err; | 
 | 	int endpoint; | 
 | 	struct usb_serial_port *port; | 
 | 	struct tty_struct *tty; | 
 | 	unsigned char *data = urb->transfer_buffer; | 
 | 	int status = urb->status; | 
 |  | 
 | 	dbg("%s: %p", __func__, urb); | 
 |  | 
 | 	endpoint = usb_pipeendpoint(urb->pipe); | 
 | 	port =  urb->context; | 
 |  | 
 | 	if (status) { | 
 | 		dbg("%s: nonzero status: %d on endpoint %02x.", | 
 | 		    __func__, status, endpoint); | 
 | 	} else { | 
 | 		tty = tty_port_tty_get(&port->port); | 
 | 		if (urb->actual_length) { | 
 | 			tty_buffer_request_room(tty, urb->actual_length); | 
 | 			tty_insert_flip_string(tty, data, urb->actual_length); | 
 | 			tty_flip_buffer_push(tty); | 
 | 		} else  | 
 | 			dbg("%s: empty read urb received", __func__); | 
 | 		tty_kref_put(tty); | 
 |  | 
 | 		/* Resubmit urb so we continue receiving */ | 
 | 		if (port->port.count && status != -ESHUTDOWN) { | 
 | 			err = usb_submit_urb(urb, GFP_ATOMIC); | 
 | 			if (err) | 
 | 				printk(KERN_ERR "%s: resubmit read urb failed. " | 
 | 					"(%d)", __func__, err); | 
 | 		} | 
 | 	} | 
 | 	return; | 
 | } | 
 |  | 
 | static void option_outdat_callback(struct urb *urb) | 
 | { | 
 | 	struct usb_serial_port *port; | 
 | 	struct option_port_private *portdata; | 
 | 	int i; | 
 |  | 
 | 	dbg("%s", __func__); | 
 |  | 
 | 	port =  urb->context; | 
 |  | 
 | 	usb_serial_port_softint(port); | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 | 	for (i = 0; i < N_OUT_URB; ++i) { | 
 | 		if (portdata->out_urbs[i] == urb) { | 
 | 			smp_mb__before_clear_bit(); | 
 | 			clear_bit(i, &portdata->out_busy); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void option_instat_callback(struct urb *urb) | 
 | { | 
 | 	int err; | 
 | 	int status = urb->status; | 
 | 	struct usb_serial_port *port =  urb->context; | 
 | 	struct option_port_private *portdata = usb_get_serial_port_data(port); | 
 | 	struct usb_serial *serial = port->serial; | 
 |  | 
 | 	dbg("%s", __func__); | 
 | 	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); | 
 |  | 
 | 	if (status == 0) { | 
 | 		struct usb_ctrlrequest *req_pkt = | 
 | 				(struct usb_ctrlrequest *)urb->transfer_buffer; | 
 |  | 
 | 		if (!req_pkt) { | 
 | 			dbg("%s: NULL req_pkt\n", __func__); | 
 | 			return; | 
 | 		} | 
 | 		if ((req_pkt->bRequestType == 0xA1) && | 
 | 				(req_pkt->bRequest == 0x20)) { | 
 | 			int old_dcd_state; | 
 | 			unsigned char signals = *((unsigned char *) | 
 | 					urb->transfer_buffer + | 
 | 					sizeof(struct usb_ctrlrequest)); | 
 |  | 
 | 			dbg("%s: signal x%x", __func__, signals); | 
 |  | 
 | 			old_dcd_state = portdata->dcd_state; | 
 | 			portdata->cts_state = 1; | 
 | 			portdata->dcd_state = ((signals & 0x01) ? 1 : 0); | 
 | 			portdata->dsr_state = ((signals & 0x02) ? 1 : 0); | 
 | 			portdata->ri_state = ((signals & 0x08) ? 1 : 0); | 
 |  | 
 | 			if (old_dcd_state && !portdata->dcd_state) { | 
 | 				struct tty_struct *tty = | 
 | 						tty_port_tty_get(&port->port); | 
 | 				if (tty && !C_CLOCAL(tty)) | 
 | 					tty_hangup(tty); | 
 | 				tty_kref_put(tty); | 
 | 			} | 
 | 		} else { | 
 | 			dbg("%s: type %x req %x", __func__, | 
 | 				req_pkt->bRequestType, req_pkt->bRequest); | 
 | 		} | 
 | 	} else | 
 | 		dbg("%s: error %d", __func__, status); | 
 |  | 
 | 	/* Resubmit urb so we continue receiving IRQ data */ | 
 | 	if (status != -ESHUTDOWN) { | 
 | 		urb->dev = serial->dev; | 
 | 		err = usb_submit_urb(urb, GFP_ATOMIC); | 
 | 		if (err) | 
 | 			dbg("%s: resubmit intr urb failed. (%d)", | 
 | 				__func__, err); | 
 | 	} | 
 | } | 
 |  | 
 | static int option_write_room(struct tty_struct *tty) | 
 | { | 
 | 	struct usb_serial_port *port = tty->driver_data; | 
 | 	struct option_port_private *portdata; | 
 | 	int i; | 
 | 	int data_len = 0; | 
 | 	struct urb *this_urb; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 |  | 
 | 	for (i = 0; i < N_OUT_URB; i++) { | 
 | 		this_urb = portdata->out_urbs[i]; | 
 | 		if (this_urb && !test_bit(i, &portdata->out_busy)) | 
 | 			data_len += OUT_BUFLEN; | 
 | 	} | 
 |  | 
 | 	dbg("%s: %d", __func__, data_len); | 
 | 	return data_len; | 
 | } | 
 |  | 
 | static int option_chars_in_buffer(struct tty_struct *tty) | 
 | { | 
 | 	struct usb_serial_port *port = tty->driver_data; | 
 | 	struct option_port_private *portdata; | 
 | 	int i; | 
 | 	int data_len = 0; | 
 | 	struct urb *this_urb; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	for (i = 0; i < N_OUT_URB; i++) { | 
 | 		this_urb = portdata->out_urbs[i]; | 
 | 		/* FIXME: This locking is insufficient as this_urb may | 
 | 		   go unused during the test */ | 
 | 		if (this_urb && test_bit(i, &portdata->out_busy)) | 
 | 			data_len += this_urb->transfer_buffer_length; | 
 | 	} | 
 | 	dbg("%s: %d", __func__, data_len); | 
 | 	return data_len; | 
 | } | 
 |  | 
 | static int option_open(struct tty_struct *tty, | 
 | 			struct usb_serial_port *port, struct file *filp) | 
 | { | 
 | 	struct option_port_private *portdata; | 
 | 	struct usb_serial *serial = port->serial; | 
 | 	int i, err; | 
 | 	struct urb *urb; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	dbg("%s", __func__); | 
 |  | 
 | 	/* Set some sane defaults */ | 
 | 	portdata->rts_state = 1; | 
 | 	portdata->dtr_state = 1; | 
 |  | 
 | 	/* Reset low level data toggle and start reading from endpoints */ | 
 | 	for (i = 0; i < N_IN_URB; i++) { | 
 | 		urb = portdata->in_urbs[i]; | 
 | 		if (!urb) | 
 | 			continue; | 
 | 		if (urb->dev != serial->dev) { | 
 | 			dbg("%s: dev %p != %p", __func__, | 
 | 				urb->dev, serial->dev); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * make sure endpoint data toggle is synchronized with the | 
 | 		 * device | 
 | 		 */ | 
 | 		usb_clear_halt(urb->dev, urb->pipe); | 
 |  | 
 | 		err = usb_submit_urb(urb, GFP_KERNEL); | 
 | 		if (err) { | 
 | 			dbg("%s: submit urb %d failed (%d) %d", | 
 | 				__func__, i, err, | 
 | 				urb->transfer_buffer_length); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Reset low level data toggle on out endpoints */ | 
 | 	for (i = 0; i < N_OUT_URB; i++) { | 
 | 		urb = portdata->out_urbs[i]; | 
 | 		if (!urb) | 
 | 			continue; | 
 | 		urb->dev = serial->dev; | 
 | 		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), | 
 | 				usb_pipeout(urb->pipe), 0); */ | 
 | 	} | 
 |  | 
 | 	if (tty) | 
 | 		tty->low_latency = 1; | 
 |  | 
 | 	option_send_setup(tty, port); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void option_close(struct tty_struct *tty, | 
 | 			struct usb_serial_port *port, struct file *filp) | 
 | { | 
 | 	int i; | 
 | 	struct usb_serial *serial = port->serial; | 
 | 	struct option_port_private *portdata; | 
 |  | 
 | 	dbg("%s", __func__); | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	portdata->rts_state = 0; | 
 | 	portdata->dtr_state = 0; | 
 |  | 
 | 	if (serial->dev) { | 
 | 		mutex_lock(&serial->disc_mutex); | 
 | 		if (!serial->disconnected) | 
 | 			option_send_setup(tty, port); | 
 | 		mutex_unlock(&serial->disc_mutex); | 
 |  | 
 | 		/* Stop reading/writing urbs */ | 
 | 		for (i = 0; i < N_IN_URB; i++) | 
 | 			usb_kill_urb(portdata->in_urbs[i]); | 
 | 		for (i = 0; i < N_OUT_URB; i++) | 
 | 			usb_kill_urb(portdata->out_urbs[i]); | 
 | 	} | 
 | 	tty_port_tty_set(&port->port, NULL); | 
 | } | 
 |  | 
 | /* Helper functions used by option_setup_urbs */ | 
 | static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint, | 
 | 		int dir, void *ctx, char *buf, int len, | 
 | 		void (*callback)(struct urb *)) | 
 | { | 
 | 	struct urb *urb; | 
 |  | 
 | 	if (endpoint == -1) | 
 | 		return NULL;		/* endpoint not needed */ | 
 |  | 
 | 	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */ | 
 | 	if (urb == NULL) { | 
 | 		dbg("%s: alloc for endpoint %d failed.", __func__, endpoint); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 		/* Fill URB using supplied data. */ | 
 | 	usb_fill_bulk_urb(urb, serial->dev, | 
 | 		      usb_sndbulkpipe(serial->dev, endpoint) | dir, | 
 | 		      buf, len, callback, ctx); | 
 |  | 
 | 	return urb; | 
 | } | 
 |  | 
 | /* Setup urbs */ | 
 | static void option_setup_urbs(struct usb_serial *serial) | 
 | { | 
 | 	int i, j; | 
 | 	struct usb_serial_port *port; | 
 | 	struct option_port_private *portdata; | 
 |  | 
 | 	dbg("%s", __func__); | 
 |  | 
 | 	for (i = 0; i < serial->num_ports; i++) { | 
 | 		port = serial->port[i]; | 
 | 		portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 		/* Do indat endpoints first */ | 
 | 		for (j = 0; j < N_IN_URB; ++j) { | 
 | 			portdata->in_urbs[j] = option_setup_urb(serial, | 
 | 					port->bulk_in_endpointAddress, | 
 | 					USB_DIR_IN, port, | 
 | 					portdata->in_buffer[j], | 
 | 					IN_BUFLEN, option_indat_callback); | 
 | 		} | 
 |  | 
 | 		/* outdat endpoints */ | 
 | 		for (j = 0; j < N_OUT_URB; ++j) { | 
 | 			portdata->out_urbs[j] = option_setup_urb(serial, | 
 | 					port->bulk_out_endpointAddress, | 
 | 					USB_DIR_OUT, port, | 
 | 					portdata->out_buffer[j], | 
 | 					OUT_BUFLEN, option_outdat_callback); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /** send RTS/DTR state to the port. | 
 |  * | 
 |  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN | 
 |  * CDC. | 
 | */ | 
 | static int option_send_setup(struct tty_struct *tty, | 
 | 						struct usb_serial_port *port) | 
 | { | 
 | 	struct usb_serial *serial = port->serial; | 
 | 	struct option_port_private *portdata; | 
 | 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; | 
 | 	dbg("%s", __func__); | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	if (tty) { | 
 | 		int val = 0; | 
 | 		if (portdata->dtr_state) | 
 | 			val |= 0x01; | 
 | 		if (portdata->rts_state) | 
 | 			val |= 0x02; | 
 |  | 
 | 		return usb_control_msg(serial->dev, | 
 | 			usb_rcvctrlpipe(serial->dev, 0), | 
 | 			0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int option_startup(struct usb_serial *serial) | 
 | { | 
 | 	int i, j, err; | 
 | 	struct usb_serial_port *port; | 
 | 	struct option_port_private *portdata; | 
 | 	u8 *buffer; | 
 |  | 
 | 	dbg("%s", __func__); | 
 |  | 
 | 	/* Now setup per port private data */ | 
 | 	for (i = 0; i < serial->num_ports; i++) { | 
 | 		port = serial->port[i]; | 
 | 		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); | 
 | 		if (!portdata) { | 
 | 			dbg("%s: kmalloc for option_port_private (%d) failed!.", | 
 | 					__func__, i); | 
 | 			return 1; | 
 | 		} | 
 |  | 
 | 		for (j = 0; j < N_IN_URB; j++) { | 
 | 			buffer = (u8 *)__get_free_page(GFP_KERNEL); | 
 | 			if (!buffer) | 
 | 				goto bail_out_error; | 
 | 			portdata->in_buffer[j] = buffer; | 
 | 		} | 
 |  | 
 | 		for (j = 0; j < N_OUT_URB; j++) { | 
 | 			buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); | 
 | 			if (!buffer) | 
 | 				goto bail_out_error2; | 
 | 			portdata->out_buffer[j] = buffer; | 
 | 		} | 
 |  | 
 | 		usb_set_serial_port_data(port, portdata); | 
 |  | 
 | 		if (!port->interrupt_in_urb) | 
 | 			continue; | 
 | 		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); | 
 | 		if (err) | 
 | 			dbg("%s: submit irq_in urb failed %d", | 
 | 				__func__, err); | 
 | 	} | 
 | 	option_setup_urbs(serial); | 
 | 	return 0; | 
 |  | 
 | bail_out_error2: | 
 | 	for (j = 0; j < N_OUT_URB; j++) | 
 | 		kfree(portdata->out_buffer[j]); | 
 | bail_out_error: | 
 | 	for (j = 0; j < N_IN_URB; j++) | 
 | 		if (portdata->in_buffer[j]) | 
 | 			free_page((unsigned long)portdata->in_buffer[j]); | 
 | 	kfree(portdata); | 
 | 	return 1; | 
 | } | 
 |  | 
 | static void option_shutdown(struct usb_serial *serial) | 
 | { | 
 | 	int i, j; | 
 | 	struct usb_serial_port *port; | 
 | 	struct option_port_private *portdata; | 
 |  | 
 | 	dbg("%s", __func__); | 
 |  | 
 | 	/* Stop reading/writing urbs */ | 
 | 	for (i = 0; i < serial->num_ports; ++i) { | 
 | 		port = serial->port[i]; | 
 | 		portdata = usb_get_serial_port_data(port); | 
 | 		for (j = 0; j < N_IN_URB; j++) | 
 | 			usb_kill_urb(portdata->in_urbs[j]); | 
 | 		for (j = 0; j < N_OUT_URB; j++) | 
 | 			usb_kill_urb(portdata->out_urbs[j]); | 
 | 	} | 
 |  | 
 | 	/* Now free them */ | 
 | 	for (i = 0; i < serial->num_ports; ++i) { | 
 | 		port = serial->port[i]; | 
 | 		portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 		for (j = 0; j < N_IN_URB; j++) { | 
 | 			if (portdata->in_urbs[j]) { | 
 | 				usb_free_urb(portdata->in_urbs[j]); | 
 | 				free_page((unsigned long) | 
 | 					portdata->in_buffer[j]); | 
 | 				portdata->in_urbs[j] = NULL; | 
 | 			} | 
 | 		} | 
 | 		for (j = 0; j < N_OUT_URB; j++) { | 
 | 			if (portdata->out_urbs[j]) { | 
 | 				usb_free_urb(portdata->out_urbs[j]); | 
 | 				kfree(portdata->out_buffer[j]); | 
 | 				portdata->out_urbs[j] = NULL; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Now free per port private data */ | 
 | 	for (i = 0; i < serial->num_ports; i++) { | 
 | 		port = serial->port[i]; | 
 | 		kfree(usb_get_serial_port_data(port)); | 
 | 	} | 
 | } | 
 |  | 
 | MODULE_AUTHOR(DRIVER_AUTHOR); | 
 | MODULE_DESCRIPTION(DRIVER_DESC); | 
 | MODULE_VERSION(DRIVER_VERSION); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | module_param(debug, bool, S_IRUGO | S_IWUSR); | 
 | MODULE_PARM_DESC(debug, "Debug messages"); |