| What: /sys/class/net/<iface>/qmi/raw_ip | |
| Date: Dec 2015 | |
| KernelVersion: 4.4 | |
| Contact: Bjørn Mork <bjorn@mork.no> | |
| Description: | |
| Boolean. Default: 'N' | |
| Set this to 'Y' to change the network device link | |
| framing from '802.3' to 'raw-ip'. | |
| The netdev will change to reflect the link framing | |
| mode. The netdev is an ordinary ethernet device in | |
| '802.3' mode, and the driver expects to exchange | |
| frames with an ethernet header over the USB link. The | |
| netdev is a headerless p-t-p device in 'raw-ip' mode, | |
| and the driver expects to echange IPv4 or IPv6 packets | |
| without any L2 header over the USB link. | |
| Userspace is in full control of firmware configuration | |
| through the delegation of the QMI protocol. Userspace | |
| is responsible for coordination of driver and firmware | |
| link framing mode, changing this setting to 'Y' if the | |
| firmware is configured for 'raw-ip' mode. | |
| What: /sys/class/net/<iface>/qmi/add_mux | |
| Date: March 2017 | |
| KernelVersion: 4.11 | |
| Contact: Bjørn Mork <bjorn@mork.no> | |
| Description: | |
| Unsigned integer. | |
| Write a number ranging from 1 to 127 to add a qmap mux | |
| based network device, supported by recent Qualcomm based | |
| modems. | |
| The network device will be called qmimux. | |
| Userspace is in charge of managing the qmux network device | |
| activation and data stream setup on the modem side by | |
| using the proper QMI protocol requests. | |
| What: /sys/class/net/<iface>/qmi/del_mux | |
| Date: March 2017 | |
| KernelVersion: 4.11 | |
| Contact: Bjørn Mork <bjorn@mork.no> | |
| Description: | |
| Unsigned integer. | |
| Write a number ranging from 1 to 127 to delete a previously | |
| created qmap mux based network device. |