| /* | |
| * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| /* | |
| * Device Tree for ARC HS Development Kit | |
| */ | |
| /dts-v1/; | |
| #include <dt-bindings/net/ti-dp83867.h> | |
| #include <dt-bindings/reset/snps,hsdk-reset.h> | |
| / { | |
| model = "snps,hsdk"; | |
| compatible = "snps,hsdk"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| chosen { | |
| bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; | |
| }; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu@0 { | |
| device_type = "cpu"; | |
| compatible = "snps,archs38"; | |
| reg = <0>; | |
| clocks = <&core_clk>; | |
| }; | |
| cpu@1 { | |
| device_type = "cpu"; | |
| compatible = "snps,archs38"; | |
| reg = <1>; | |
| clocks = <&core_clk>; | |
| }; | |
| cpu@2 { | |
| device_type = "cpu"; | |
| compatible = "snps,archs38"; | |
| reg = <2>; | |
| clocks = <&core_clk>; | |
| }; | |
| cpu@3 { | |
| device_type = "cpu"; | |
| compatible = "snps,archs38"; | |
| reg = <3>; | |
| clocks = <&core_clk>; | |
| }; | |
| }; | |
| input_clk: input-clk { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <33333333>; | |
| }; | |
| cpu_intc: cpu-interrupt-controller { | |
| compatible = "snps,archs-intc"; | |
| interrupt-controller; | |
| #interrupt-cells = <1>; | |
| }; | |
| idu_intc: idu-interrupt-controller { | |
| compatible = "snps,archs-idu-intc"; | |
| interrupt-controller; | |
| #interrupt-cells = <1>; | |
| interrupt-parent = <&cpu_intc>; | |
| }; | |
| arcpct: pct { | |
| compatible = "snps,archs-pct"; | |
| }; | |
| /* TIMER0 with interrupt for clockevent */ | |
| timer { | |
| compatible = "snps,arc-timer"; | |
| interrupts = <16>; | |
| interrupt-parent = <&cpu_intc>; | |
| clocks = <&core_clk>; | |
| }; | |
| /* 64-bit Global Free Running Counter */ | |
| gfrc { | |
| compatible = "snps,archs-timer-gfrc"; | |
| clocks = <&core_clk>; | |
| }; | |
| soc { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| interrupt-parent = <&idu_intc>; | |
| ranges = <0x00000000 0xf0000000 0x10000000>; | |
| cgu_rst: reset-controller@8a0 { | |
| compatible = "snps,hsdk-reset"; | |
| #reset-cells = <1>; | |
| reg = <0x8A0 0x4>, <0xFF0 0x4>; | |
| }; | |
| core_clk: core-clk@0 { | |
| compatible = "snps,hsdk-core-pll-clock"; | |
| reg = <0x00 0x10>, <0x14B8 0x4>; | |
| #clock-cells = <0>; | |
| clocks = <&input_clk>; | |
| }; | |
| serial: serial@5000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x5000 0x100>; | |
| clock-frequency = <33330000>; | |
| interrupts = <6>; | |
| baud = <115200>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| }; | |
| gmacclk: gmacclk { | |
| compatible = "fixed-clock"; | |
| clock-frequency = <400000000>; | |
| #clock-cells = <0>; | |
| }; | |
| mmcclk_ciu: mmcclk-ciu { | |
| compatible = "fixed-clock"; | |
| /* | |
| * DW sdio controller has external ciu clock divider | |
| * controlled via register in SDIO IP. Due to its | |
| * unexpected default value (it should devide by 1 | |
| * but it devides by 8) SDIO IP uses wrong clock and | |
| * works unstable (see STAR 9001204800) | |
| * So add temporary fix and change clock frequency | |
| * from 100000000 to 12500000 Hz until we fix dw sdio | |
| * driver itself. | |
| */ | |
| clock-frequency = <12500000>; | |
| #clock-cells = <0>; | |
| }; | |
| mmcclk_biu: mmcclk-biu { | |
| compatible = "fixed-clock"; | |
| clock-frequency = <400000000>; | |
| #clock-cells = <0>; | |
| }; | |
| ethernet@8000 { | |
| #interrupt-cells = <1>; | |
| compatible = "snps,dwmac"; | |
| reg = <0x8000 0x2000>; | |
| interrupts = <10>; | |
| interrupt-names = "macirq"; | |
| phy-mode = "rgmii"; | |
| snps,pbl = <32>; | |
| clocks = <&gmacclk>; | |
| clock-names = "stmmaceth"; | |
| phy-handle = <&phy0>; | |
| resets = <&cgu_rst HSDK_ETH_RESET>; | |
| reset-names = "stmmaceth"; | |
| mdio { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "snps,dwmac-mdio"; | |
| phy0: ethernet-phy@0 { | |
| reg = <0>; | |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; | |
| ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; | |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; | |
| }; | |
| }; | |
| }; | |
| ohci@60000 { | |
| compatible = "snps,hsdk-v1.0-ohci", "generic-ohci"; | |
| reg = <0x60000 0x100>; | |
| interrupts = <15>; | |
| }; | |
| ehci@40000 { | |
| compatible = "snps,hsdk-v1.0-ehci", "generic-ehci"; | |
| reg = <0x40000 0x100>; | |
| interrupts = <15>; | |
| }; | |
| mmc@a000 { | |
| compatible = "altr,socfpga-dw-mshc"; | |
| reg = <0xa000 0x400>; | |
| num-slots = <1>; | |
| fifo-depth = <16>; | |
| card-detect-delay = <200>; | |
| clocks = <&mmcclk_biu>, <&mmcclk_ciu>; | |
| clock-names = "biu", "ciu"; | |
| interrupts = <12>; | |
| bus-width = <4>; | |
| }; | |
| }; | |
| memory@80000000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| device_type = "memory"; | |
| reg = <0x80000000 0x40000000>; /* 1 GiB */ | |
| }; | |
| }; |