| /* |
| ** Tablewalk MMU emulator |
| ** |
| ** by Toshiyasu Morita |
| ** |
| ** Started 1/16/98 @ 2:22 am |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/mman.h> |
| #include <linux/mm.h> |
| #include <linux/kernel.h> |
| #include <linux/ptrace.h> |
| #include <linux/delay.h> |
| #include <linux/bootmem.h> |
| #include <linux/bitops.h> |
| #include <linux/module.h> |
| #include <linux/sched/mm.h> |
| |
| #include <asm/setup.h> |
| #include <asm/traps.h> |
| #include <linux/uaccess.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/sun3mmu.h> |
| #include <asm/segment.h> |
| #include <asm/oplib.h> |
| #include <asm/mmu_context.h> |
| #include <asm/dvma.h> |
| |
| |
| #undef DEBUG_MMU_EMU |
| #define DEBUG_PROM_MAPS |
| |
| /* |
| ** Defines |
| */ |
| |
| #define CONTEXTS_NUM 8 |
| #define SEGMAPS_PER_CONTEXT_NUM 2048 |
| #define PAGES_PER_SEGMENT 16 |
| #define PMEGS_NUM 256 |
| #define PMEG_MASK 0xFF |
| |
| /* |
| ** Globals |
| */ |
| |
| unsigned long m68k_vmalloc_end; |
| EXPORT_SYMBOL(m68k_vmalloc_end); |
| |
| unsigned long pmeg_vaddr[PMEGS_NUM]; |
| unsigned char pmeg_alloc[PMEGS_NUM]; |
| unsigned char pmeg_ctx[PMEGS_NUM]; |
| |
| /* pointers to the mm structs for each task in each |
| context. 0xffffffff is a marker for kernel context */ |
| static struct mm_struct *ctx_alloc[CONTEXTS_NUM] = { |
| [0] = (struct mm_struct *)0xffffffff |
| }; |
| |
| /* has this context been mmdrop'd? */ |
| static unsigned char ctx_avail = CONTEXTS_NUM-1; |
| |
| /* array of pages to be marked off for the rom when we do mem_init later */ |
| /* 256 pages lets the rom take up to 2mb of physical ram.. I really |
| hope it never wants mote than that. */ |
| unsigned long rom_pages[256]; |
| |
| /* Print a PTE value in symbolic form. For debugging. */ |
| void print_pte (pte_t pte) |
| { |
| #if 0 |
| /* Verbose version. */ |
| unsigned long val = pte_val (pte); |
| pr_cont(" pte=%lx [addr=%lx", |
| val, (val & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT); |
| if (val & SUN3_PAGE_VALID) pr_cont(" valid"); |
| if (val & SUN3_PAGE_WRITEABLE) pr_cont(" write"); |
| if (val & SUN3_PAGE_SYSTEM) pr_cont(" sys"); |
| if (val & SUN3_PAGE_NOCACHE) pr_cont(" nocache"); |
| if (val & SUN3_PAGE_ACCESSED) pr_cont(" accessed"); |
| if (val & SUN3_PAGE_MODIFIED) pr_cont(" modified"); |
| switch (val & SUN3_PAGE_TYPE_MASK) { |
| case SUN3_PAGE_TYPE_MEMORY: pr_cont(" memory"); break; |
| case SUN3_PAGE_TYPE_IO: pr_cont(" io"); break; |
| case SUN3_PAGE_TYPE_VME16: pr_cont(" vme16"); break; |
| case SUN3_PAGE_TYPE_VME32: pr_cont(" vme32"); break; |
| } |
| pr_cont("]\n"); |
| #else |
| /* Terse version. More likely to fit on a line. */ |
| unsigned long val = pte_val (pte); |
| char flags[7], *type; |
| |
| flags[0] = (val & SUN3_PAGE_VALID) ? 'v' : '-'; |
| flags[1] = (val & SUN3_PAGE_WRITEABLE) ? 'w' : '-'; |
| flags[2] = (val & SUN3_PAGE_SYSTEM) ? 's' : '-'; |
| flags[3] = (val & SUN3_PAGE_NOCACHE) ? 'x' : '-'; |
| flags[4] = (val & SUN3_PAGE_ACCESSED) ? 'a' : '-'; |
| flags[5] = (val & SUN3_PAGE_MODIFIED) ? 'm' : '-'; |
| flags[6] = '\0'; |
| |
| switch (val & SUN3_PAGE_TYPE_MASK) { |
| case SUN3_PAGE_TYPE_MEMORY: type = "memory"; break; |
| case SUN3_PAGE_TYPE_IO: type = "io" ; break; |
| case SUN3_PAGE_TYPE_VME16: type = "vme16" ; break; |
| case SUN3_PAGE_TYPE_VME32: type = "vme32" ; break; |
| default: type = "unknown?"; break; |
| } |
| |
| pr_cont(" pte=%08lx [%07lx %s %s]\n", |
| val, (val & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT, flags, type); |
| #endif |
| } |
| |
| /* Print the PTE value for a given virtual address. For debugging. */ |
| void print_pte_vaddr (unsigned long vaddr) |
| { |
| pr_cont(" vaddr=%lx [%02lx]", vaddr, sun3_get_segmap (vaddr)); |
| print_pte (__pte (sun3_get_pte (vaddr))); |
| } |
| |
| /* |
| * Initialise the MMU emulator. |
| */ |
| void __init mmu_emu_init(unsigned long bootmem_end) |
| { |
| unsigned long seg, num; |
| int i,j; |
| |
| memset(rom_pages, 0, sizeof(rom_pages)); |
| memset(pmeg_vaddr, 0, sizeof(pmeg_vaddr)); |
| memset(pmeg_alloc, 0, sizeof(pmeg_alloc)); |
| memset(pmeg_ctx, 0, sizeof(pmeg_ctx)); |
| |
| /* pmeg align the end of bootmem, adding another pmeg, |
| * later bootmem allocations will likely need it */ |
| bootmem_end = (bootmem_end + (2 * SUN3_PMEG_SIZE)) & ~SUN3_PMEG_MASK; |
| |
| /* mark all of the pmegs used thus far as reserved */ |
| for (i=0; i < __pa(bootmem_end) / SUN3_PMEG_SIZE ; ++i) |
| pmeg_alloc[i] = 2; |
| |
| |
| /* I'm thinking that most of the top pmeg's are going to be |
| used for something, and we probably shouldn't risk it */ |
| for(num = 0xf0; num <= 0xff; num++) |
| pmeg_alloc[num] = 2; |
| |
| /* liberate all existing mappings in the rest of kernel space */ |
| for(seg = bootmem_end; seg < 0x0f800000; seg += SUN3_PMEG_SIZE) { |
| i = sun3_get_segmap(seg); |
| |
| if(!pmeg_alloc[i]) { |
| #ifdef DEBUG_MMU_EMU |
| pr_info("freed:"); |
| print_pte_vaddr (seg); |
| #endif |
| sun3_put_segmap(seg, SUN3_INVALID_PMEG); |
| } |
| } |
| |
| j = 0; |
| for (num=0, seg=0x0F800000; seg<0x10000000; seg+=16*PAGE_SIZE) { |
| if (sun3_get_segmap (seg) != SUN3_INVALID_PMEG) { |
| #ifdef DEBUG_PROM_MAPS |
| for(i = 0; i < 16; i++) { |
| pr_info("mapped:"); |
| print_pte_vaddr (seg + (i*PAGE_SIZE)); |
| break; |
| } |
| #endif |
| // the lowest mapping here is the end of our |
| // vmalloc region |
| if (!m68k_vmalloc_end) |
| m68k_vmalloc_end = seg; |
| |
| // mark the segmap alloc'd, and reserve any |
| // of the first 0xbff pages the hardware is |
| // already using... does any sun3 support > 24mb? |
| pmeg_alloc[sun3_get_segmap(seg)] = 2; |
| } |
| } |
| |
| dvma_init(); |
| |
| |
| /* blank everything below the kernel, and we've got the base |
| mapping to start all the contexts off with... */ |
| for(seg = 0; seg < PAGE_OFFSET; seg += SUN3_PMEG_SIZE) |
| sun3_put_segmap(seg, SUN3_INVALID_PMEG); |
| |
| set_fs(MAKE_MM_SEG(3)); |
| for(seg = 0; seg < 0x10000000; seg += SUN3_PMEG_SIZE) { |
| i = sun3_get_segmap(seg); |
| for(j = 1; j < CONTEXTS_NUM; j++) |
| (*(romvec->pv_setctxt))(j, (void *)seg, i); |
| } |
| set_fs(KERNEL_DS); |
| |
| } |
| |
| /* erase the mappings for a dead context. Uses the pg_dir for hints |
| as the pmeg tables proved somewhat unreliable, and unmapping all of |
| TASK_SIZE was much slower and no more stable. */ |
| /* todo: find a better way to keep track of the pmegs used by a |
| context for when they're cleared */ |
| void clear_context(unsigned long context) |
| { |
| unsigned char oldctx; |
| unsigned long i; |
| |
| if(context) { |
| if(!ctx_alloc[context]) |
| panic("clear_context: context not allocated\n"); |
| |
| ctx_alloc[context]->context = SUN3_INVALID_CONTEXT; |
| ctx_alloc[context] = (struct mm_struct *)0; |
| ctx_avail++; |
| } |
| |
| oldctx = sun3_get_context(); |
| |
| sun3_put_context(context); |
| |
| for(i = 0; i < SUN3_INVALID_PMEG; i++) { |
| if((pmeg_ctx[i] == context) && (pmeg_alloc[i] == 1)) { |
| sun3_put_segmap(pmeg_vaddr[i], SUN3_INVALID_PMEG); |
| pmeg_ctx[i] = 0; |
| pmeg_alloc[i] = 0; |
| pmeg_vaddr[i] = 0; |
| } |
| } |
| |
| sun3_put_context(oldctx); |
| } |
| |
| /* gets an empty context. if full, kills the next context listed to |
| die first */ |
| /* This context invalidation scheme is, well, totally arbitrary, I'm |
| sure it could be much more intelligent... but it gets the job done |
| for now without much overhead in making it's decision. */ |
| /* todo: come up with optimized scheme for flushing contexts */ |
| unsigned long get_free_context(struct mm_struct *mm) |
| { |
| unsigned long new = 1; |
| static unsigned char next_to_die = 1; |
| |
| if(!ctx_avail) { |
| /* kill someone to get our context */ |
| new = next_to_die; |
| clear_context(new); |
| next_to_die = (next_to_die + 1) & 0x7; |
| if(!next_to_die) |
| next_to_die++; |
| } else { |
| while(new < CONTEXTS_NUM) { |
| if(ctx_alloc[new]) |
| new++; |
| else |
| break; |
| } |
| // check to make sure one was really free... |
| if(new == CONTEXTS_NUM) |
| panic("get_free_context: failed to find free context"); |
| } |
| |
| ctx_alloc[new] = mm; |
| ctx_avail--; |
| |
| return new; |
| } |
| |
| /* |
| * Dynamically select a `spare' PMEG and use it to map virtual `vaddr' in |
| * `context'. Maintain internal PMEG management structures. This doesn't |
| * actually map the physical address, but does clear the old mappings. |
| */ |
| //todo: better allocation scheme? but is extra complexity worthwhile? |
| //todo: only clear old entries if necessary? how to tell? |
| |
| inline void mmu_emu_map_pmeg (int context, int vaddr) |
| { |
| static unsigned char curr_pmeg = 128; |
| int i; |
| |
| /* Round address to PMEG boundary. */ |
| vaddr &= ~SUN3_PMEG_MASK; |
| |
| /* Find a spare one. */ |
| while (pmeg_alloc[curr_pmeg] == 2) |
| ++curr_pmeg; |
| |
| |
| #ifdef DEBUG_MMU_EMU |
| pr_info("mmu_emu_map_pmeg: pmeg %x to context %d vaddr %x\n", |
| curr_pmeg, context, vaddr); |
| #endif |
| |
| /* Invalidate old mapping for the pmeg, if any */ |
| if (pmeg_alloc[curr_pmeg] == 1) { |
| sun3_put_context(pmeg_ctx[curr_pmeg]); |
| sun3_put_segmap (pmeg_vaddr[curr_pmeg], SUN3_INVALID_PMEG); |
| sun3_put_context(context); |
| } |
| |
| /* Update PMEG management structures. */ |
| // don't take pmeg's away from the kernel... |
| if(vaddr >= PAGE_OFFSET) { |
| /* map kernel pmegs into all contexts */ |
| unsigned char i; |
| |
| for(i = 0; i < CONTEXTS_NUM; i++) { |
| sun3_put_context(i); |
| sun3_put_segmap (vaddr, curr_pmeg); |
| } |
| sun3_put_context(context); |
| pmeg_alloc[curr_pmeg] = 2; |
| pmeg_ctx[curr_pmeg] = 0; |
| |
| } |
| else { |
| pmeg_alloc[curr_pmeg] = 1; |
| pmeg_ctx[curr_pmeg] = context; |
| sun3_put_segmap (vaddr, curr_pmeg); |
| |
| } |
| pmeg_vaddr[curr_pmeg] = vaddr; |
| |
| /* Set hardware mapping and clear the old PTE entries. */ |
| for (i=0; i<SUN3_PMEG_SIZE; i+=SUN3_PTE_SIZE) |
| sun3_put_pte (vaddr + i, SUN3_PAGE_SYSTEM); |
| |
| /* Consider a different one next time. */ |
| ++curr_pmeg; |
| } |
| |
| /* |
| * Handle a pagefault at virtual address `vaddr'; check if there should be a |
| * page there (specifically, whether the software pagetables indicate that |
| * there is). This is necessary due to the limited size of the second-level |
| * Sun3 hardware pagetables (256 groups of 16 pages). If there should be a |
| * mapping present, we select a `spare' PMEG and use it to create a mapping. |
| * `read_flag' is nonzero for a read fault; zero for a write. Returns nonzero |
| * if we successfully handled the fault. |
| */ |
| //todo: should we bump minor pagefault counter? if so, here or in caller? |
| //todo: possibly inline this into bus_error030 in <asm/buserror.h> ? |
| |
| // kernel_fault is set when a kernel page couldn't be demand mapped, |
| // and forces another try using the kernel page table. basically a |
| // hack so that vmalloc would work correctly. |
| |
| int mmu_emu_handle_fault (unsigned long vaddr, int read_flag, int kernel_fault) |
| { |
| unsigned long segment, offset; |
| unsigned char context; |
| pte_t *pte; |
| pgd_t * crp; |
| |
| if(current->mm == NULL) { |
| crp = swapper_pg_dir; |
| context = 0; |
| } else { |
| context = current->mm->context; |
| if(kernel_fault) |
| crp = swapper_pg_dir; |
| else |
| crp = current->mm->pgd; |
| } |
| |
| #ifdef DEBUG_MMU_EMU |
| pr_info("mmu_emu_handle_fault: vaddr=%lx type=%s crp=%p\n", |
| vaddr, read_flag ? "read" : "write", crp); |
| #endif |
| |
| segment = (vaddr >> SUN3_PMEG_SIZE_BITS) & 0x7FF; |
| offset = (vaddr >> SUN3_PTE_SIZE_BITS) & 0xF; |
| |
| #ifdef DEBUG_MMU_EMU |
| pr_info("mmu_emu_handle_fault: segment=%lx offset=%lx\n", segment, |
| offset); |
| #endif |
| |
| pte = (pte_t *) pgd_val (*(crp + segment)); |
| |
| //todo: next line should check for valid pmd properly. |
| if (!pte) { |
| // pr_info("mmu_emu_handle_fault: invalid pmd\n"); |
| return 0; |
| } |
| |
| pte = (pte_t *) __va ((unsigned long)(pte + offset)); |
| |
| /* Make sure this is a valid page */ |
| if (!(pte_val (*pte) & SUN3_PAGE_VALID)) |
| return 0; |
| |
| /* Make sure there's a pmeg allocated for the page */ |
| if (sun3_get_segmap (vaddr&~SUN3_PMEG_MASK) == SUN3_INVALID_PMEG) |
| mmu_emu_map_pmeg (context, vaddr); |
| |
| /* Write the pte value to hardware MMU */ |
| sun3_put_pte (vaddr&PAGE_MASK, pte_val (*pte)); |
| |
| /* Update software copy of the pte value */ |
| // I'm not sure this is necessary. If this is required, we ought to simply |
| // copy this out when we reuse the PMEG or at some other convenient time. |
| // Doing it here is fairly meaningless, anyway, as we only know about the |
| // first access to a given page. --m |
| if (!read_flag) { |
| if (pte_val (*pte) & SUN3_PAGE_WRITEABLE) |
| pte_val (*pte) |= (SUN3_PAGE_ACCESSED |
| | SUN3_PAGE_MODIFIED); |
| else |
| return 0; /* Write-protect error. */ |
| } else |
| pte_val (*pte) |= SUN3_PAGE_ACCESSED; |
| |
| #ifdef DEBUG_MMU_EMU |
| pr_info("seg:%ld crp:%p ->", get_fs().seg, crp); |
| print_pte_vaddr (vaddr); |
| pr_cont("\n"); |
| #endif |
| |
| return 1; |
| } |