| /* | |
| * Synopsys AXS10X SDP Generic PLL clock driver | |
| * | |
| * Copyright (C) 2017 Synopsys | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/platform_device.h> | |
| #include <linux/module.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/delay.h> | |
| #include <linux/err.h> | |
| #include <linux/device.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_device.h> | |
| #include <linux/slab.h> | |
| #include <linux/of.h> | |
| /* PLL registers addresses */ | |
| #define PLL_REG_IDIV 0x0 | |
| #define PLL_REG_FBDIV 0x4 | |
| #define PLL_REG_ODIV 0x8 | |
| /* | |
| * Bit fields of the PLL IDIV/FBDIV/ODIV registers: | |
| * ________________________________________________________________________ | |
| * |31 15| 14 | 13 | 12 |11 6|5 0| | |
| * |-------RESRVED------|-NOUPDATE-|-BYPASS-|-EDGE-|--HIGHTIME--|--LOWTIME--| | |
| * |____________________|__________|________|______|____________|___________| | |
| * | |
| * Following macros determine the way of access to these registers | |
| * They should be set up only using the macros. | |
| * reg should be an u32 variable. | |
| */ | |
| #define PLL_REG_GET_LOW(reg) \ | |
| (((reg) & (0x3F << 0)) >> 0) | |
| #define PLL_REG_GET_HIGH(reg) \ | |
| (((reg) & (0x3F << 6)) >> 6) | |
| #define PLL_REG_GET_EDGE(reg) \ | |
| (((reg) & (BIT(12))) ? 1 : 0) | |
| #define PLL_REG_GET_BYPASS(reg) \ | |
| (((reg) & (BIT(13))) ? 1 : 0) | |
| #define PLL_REG_GET_NOUPD(reg) \ | |
| (((reg) & (BIT(14))) ? 1 : 0) | |
| #define PLL_REG_GET_PAD(reg) \ | |
| (((reg) & (0x1FFFF << 15)) >> 15) | |
| #define PLL_REG_SET_LOW(reg, value) \ | |
| { reg |= (((value) & 0x3F) << 0); } | |
| #define PLL_REG_SET_HIGH(reg, value) \ | |
| { reg |= (((value) & 0x3F) << 6); } | |
| #define PLL_REG_SET_EDGE(reg, value) \ | |
| { reg |= (((value) & 0x01) << 12); } | |
| #define PLL_REG_SET_BYPASS(reg, value) \ | |
| { reg |= (((value) & 0x01) << 13); } | |
| #define PLL_REG_SET_NOUPD(reg, value) \ | |
| { reg |= (((value) & 0x01) << 14); } | |
| #define PLL_REG_SET_PAD(reg, value) \ | |
| { reg |= (((value) & 0x1FFFF) << 15); } | |
| #define PLL_LOCK BIT(0) | |
| #define PLL_ERROR BIT(1) | |
| #define PLL_MAX_LOCK_TIME 100 /* 100 us */ | |
| struct axs10x_pll_cfg { | |
| u32 rate; | |
| u32 idiv; | |
| u32 fbdiv; | |
| u32 odiv; | |
| }; | |
| static const struct axs10x_pll_cfg arc_pll_cfg[] = { | |
| { 33333333, 1, 1, 1 }, | |
| { 50000000, 1, 30, 20 }, | |
| { 75000000, 2, 45, 10 }, | |
| { 90000000, 2, 54, 10 }, | |
| { 100000000, 1, 30, 10 }, | |
| { 125000000, 2, 45, 6 }, | |
| {} | |
| }; | |
| static const struct axs10x_pll_cfg pgu_pll_cfg[] = { | |
| { 25200000, 1, 84, 90 }, | |
| { 50000000, 1, 100, 54 }, | |
| { 74250000, 1, 44, 16 }, | |
| {} | |
| }; | |
| struct axs10x_pll_clk { | |
| struct clk_hw hw; | |
| void __iomem *base; | |
| void __iomem *lock; | |
| const struct axs10x_pll_cfg *pll_cfg; | |
| struct device *dev; | |
| }; | |
| static inline void axs10x_pll_write(struct axs10x_pll_clk *clk, u32 reg, | |
| u32 val) | |
| { | |
| iowrite32(val, clk->base + reg); | |
| } | |
| static inline u32 axs10x_pll_read(struct axs10x_pll_clk *clk, u32 reg) | |
| { | |
| return ioread32(clk->base + reg); | |
| } | |
| static inline struct axs10x_pll_clk *to_axs10x_pll_clk(struct clk_hw *hw) | |
| { | |
| return container_of(hw, struct axs10x_pll_clk, hw); | |
| } | |
| static inline u32 axs10x_div_get_value(u32 reg) | |
| { | |
| if (PLL_REG_GET_BYPASS(reg)) | |
| return 1; | |
| return PLL_REG_GET_HIGH(reg) + PLL_REG_GET_LOW(reg); | |
| } | |
| static inline u32 axs10x_encode_div(unsigned int id, int upd) | |
| { | |
| u32 div = 0; | |
| PLL_REG_SET_LOW(div, (id % 2 == 0) ? id >> 1 : (id >> 1) + 1); | |
| PLL_REG_SET_HIGH(div, id >> 1); | |
| PLL_REG_SET_EDGE(div, id % 2); | |
| PLL_REG_SET_BYPASS(div, id == 1 ? 1 : 0); | |
| PLL_REG_SET_NOUPD(div, upd == 0 ? 1 : 0); | |
| return div; | |
| } | |
| static unsigned long axs10x_pll_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| u64 rate; | |
| u32 idiv, fbdiv, odiv; | |
| struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw); | |
| idiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_IDIV)); | |
| fbdiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_FBDIV)); | |
| odiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_ODIV)); | |
| rate = (u64)parent_rate * fbdiv; | |
| do_div(rate, idiv * odiv); | |
| return rate; | |
| } | |
| static long axs10x_pll_round_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long *prate) | |
| { | |
| int i; | |
| long best_rate; | |
| struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw); | |
| const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg; | |
| if (pll_cfg[0].rate == 0) | |
| return -EINVAL; | |
| best_rate = pll_cfg[0].rate; | |
| for (i = 1; pll_cfg[i].rate != 0; i++) { | |
| if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate)) | |
| best_rate = pll_cfg[i].rate; | |
| } | |
| return best_rate; | |
| } | |
| static int axs10x_pll_set_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long parent_rate) | |
| { | |
| int i; | |
| struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw); | |
| const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg; | |
| for (i = 0; pll_cfg[i].rate != 0; i++) { | |
| if (pll_cfg[i].rate == rate) { | |
| axs10x_pll_write(clk, PLL_REG_IDIV, | |
| axs10x_encode_div(pll_cfg[i].idiv, 0)); | |
| axs10x_pll_write(clk, PLL_REG_FBDIV, | |
| axs10x_encode_div(pll_cfg[i].fbdiv, 0)); | |
| axs10x_pll_write(clk, PLL_REG_ODIV, | |
| axs10x_encode_div(pll_cfg[i].odiv, 1)); | |
| /* | |
| * Wait until CGU relocks and check error status. | |
| * If after timeout CGU is unlocked yet return error | |
| */ | |
| udelay(PLL_MAX_LOCK_TIME); | |
| if (!(ioread32(clk->lock) & PLL_LOCK)) | |
| return -ETIMEDOUT; | |
| if (ioread32(clk->lock) & PLL_ERROR) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| } | |
| dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate, | |
| parent_rate); | |
| return -EINVAL; | |
| } | |
| static const struct clk_ops axs10x_pll_ops = { | |
| .recalc_rate = axs10x_pll_recalc_rate, | |
| .round_rate = axs10x_pll_round_rate, | |
| .set_rate = axs10x_pll_set_rate, | |
| }; | |
| static int axs10x_pll_clk_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| const char *parent_name; | |
| struct axs10x_pll_clk *pll_clk; | |
| struct resource *mem; | |
| struct clk_init_data init = { }; | |
| int ret; | |
| pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL); | |
| if (!pll_clk) | |
| return -ENOMEM; | |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| pll_clk->base = devm_ioremap_resource(dev, mem); | |
| if (IS_ERR(pll_clk->base)) | |
| return PTR_ERR(pll_clk->base); | |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); | |
| pll_clk->lock = devm_ioremap_resource(dev, mem); | |
| if (IS_ERR(pll_clk->lock)) | |
| return PTR_ERR(pll_clk->lock); | |
| init.name = dev->of_node->name; | |
| init.ops = &axs10x_pll_ops; | |
| parent_name = of_clk_get_parent_name(dev->of_node, 0); | |
| init.parent_names = &parent_name; | |
| init.num_parents = 1; | |
| pll_clk->hw.init = &init; | |
| pll_clk->dev = dev; | |
| pll_clk->pll_cfg = of_device_get_match_data(dev); | |
| if (!pll_clk->pll_cfg) { | |
| dev_err(dev, "No OF match data provided\n"); | |
| return -EINVAL; | |
| } | |
| ret = devm_clk_hw_register(dev, &pll_clk->hw); | |
| if (ret) { | |
| dev_err(dev, "failed to register %s clock\n", init.name); | |
| return ret; | |
| } | |
| return of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get, | |
| &pll_clk->hw); | |
| } | |
| static int axs10x_pll_clk_remove(struct platform_device *pdev) | |
| { | |
| of_clk_del_provider(pdev->dev.of_node); | |
| return 0; | |
| } | |
| static void __init of_axs10x_pll_clk_setup(struct device_node *node) | |
| { | |
| const char *parent_name; | |
| struct axs10x_pll_clk *pll_clk; | |
| struct clk_init_data init = { }; | |
| int ret; | |
| pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL); | |
| if (!pll_clk) | |
| return; | |
| pll_clk->base = of_iomap(node, 0); | |
| if (!pll_clk->base) { | |
| pr_err("failed to map pll div registers\n"); | |
| goto err_free_pll_clk; | |
| } | |
| pll_clk->lock = of_iomap(node, 1); | |
| if (!pll_clk->lock) { | |
| pr_err("failed to map pll lock register\n"); | |
| goto err_unmap_base; | |
| } | |
| init.name = node->name; | |
| init.ops = &axs10x_pll_ops; | |
| parent_name = of_clk_get_parent_name(node, 0); | |
| init.parent_names = &parent_name; | |
| init.num_parents = parent_name ? 1 : 0; | |
| pll_clk->hw.init = &init; | |
| pll_clk->pll_cfg = arc_pll_cfg; | |
| ret = clk_hw_register(NULL, &pll_clk->hw); | |
| if (ret) { | |
| pr_err("failed to register %s clock\n", node->name); | |
| goto err_unmap_lock; | |
| } | |
| ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw); | |
| if (ret) { | |
| pr_err("failed to add hw provider for %s clock\n", node->name); | |
| goto err_unregister_clk; | |
| } | |
| return; | |
| err_unregister_clk: | |
| clk_hw_unregister(&pll_clk->hw); | |
| err_unmap_lock: | |
| iounmap(pll_clk->lock); | |
| err_unmap_base: | |
| iounmap(pll_clk->base); | |
| err_free_pll_clk: | |
| kfree(pll_clk); | |
| } | |
| CLK_OF_DECLARE(axs10x_pll_clock, "snps,axs10x-arc-pll-clock", | |
| of_axs10x_pll_clk_setup); | |
| static const struct of_device_id axs10x_pll_clk_id[] = { | |
| { .compatible = "snps,axs10x-pgu-pll-clock", .data = &pgu_pll_cfg}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, axs10x_pll_clk_id); | |
| static struct platform_driver axs10x_pll_clk_driver = { | |
| .driver = { | |
| .name = "axs10x-pll-clock", | |
| .of_match_table = axs10x_pll_clk_id, | |
| }, | |
| .probe = axs10x_pll_clk_probe, | |
| .remove = axs10x_pll_clk_remove, | |
| }; | |
| builtin_platform_driver(axs10x_pll_clk_driver); | |
| MODULE_AUTHOR("Vlad Zakharov <vzakhar@synopsys.com>"); | |
| MODULE_DESCRIPTION("Synopsys AXS10X SDP Generic PLL Clock Driver"); | |
| MODULE_LICENSE("GPL v2"); |