drivers/crypto/cavium/nitrox/nitrox_req.h

#ifndef __NITROX_REQ_H
#define __NITROX_REQ_H

#include <linux/dma-mapping.h>
#include <crypto/aes.h>

#include "nitrox_dev.h"

/**
 * struct gphdr - General purpose Header
 * @param0: first parameter.
 * @param1: second parameter.
 * @param2: third parameter.
 * @param3: fourth parameter.
 *
 * Params tell the iv and enc/dec data offsets.
 */
struct gphdr {
	__be16 param0;
	__be16 param1;
	__be16 param2;
	__be16 param3;
};

/**
 * struct se_req_ctrl - SE request information.
 * @arg: Minor number of the opcode
 * @ctxc: Context control.
 * @unca: Uncertainity enabled.
 * @info: Additional information for SE cores.
 * @ctxl: Context length in bytes.
 * @uddl: User defined data length
 */
union se_req_ctrl {
	u64 value;
	struct {
		u64 raz	: 22;
		u64 arg	: 8;
		u64 ctxc : 2;
		u64 unca : 1;
		u64 info : 3;
		u64 unc : 8;
		u64 ctxl : 12;
		u64 uddl : 8;
	} s;
};

struct nitrox_sglist {
	u16 len;
	u16 raz0;
	u32 raz1;
	dma_addr_t dma;
};

#define MAX_IV_LEN 16

/**
 * struct se_crypto_request - SE crypto request structure.
 * @opcode: Request opcode (enc/dec)
 * @flags: flags from crypto subsystem
 * @ctx_handle: Crypto context handle.
 * @gph: GP Header
 * @ctrl: Request Information.
 * @in: Input sglist
 * @out: Output sglist
 */
struct se_crypto_request {
	u8 opcode;
	gfp_t gfp;
	u32 flags;
	u64 ctx_handle;

	struct gphdr gph;
	union se_req_ctrl ctrl;

	u8 iv[MAX_IV_LEN];
	u16 ivsize;

	struct scatterlist *src;
	struct scatterlist *dst;
};

/* Crypto opcodes */
#define FLEXI_CRYPTO_ENCRYPT_HMAC	0x33
#define ENCRYPT	0
#define DECRYPT 1

/* IV from context */
#define IV_FROM_CTX	0
/* IV from Input data */
#define IV_FROM_DPTR	1

/**
 * cipher opcodes for firmware
 */
enum flexi_cipher {
	CIPHER_NULL = 0,
	CIPHER_3DES_CBC,
	CIPHER_3DES_ECB,
	CIPHER_AES_CBC,
	CIPHER_AES_ECB,
	CIPHER_AES_CFB,
	CIPHER_AES_CTR,
	CIPHER_AES_GCM,
	CIPHER_AES_XTS,
	CIPHER_AES_CCM,
	CIPHER_AES_CBC_CTS,
	CIPHER_AES_ECB_CTS,
	CIPHER_INVALID
};

/**
 * struct crypto_keys - Crypto keys
 * @key: Encryption key or KEY1 for AES-XTS
 * @iv: Encryption IV or Tweak for AES-XTS
 */
struct crypto_keys {
	union {
		u8 key[AES_MAX_KEY_SIZE];
		u8 key1[AES_MAX_KEY_SIZE];
	} u;
	u8 iv[AES_BLOCK_SIZE];
};

/**
 * struct auth_keys - Authentication keys
 * @ipad: IPAD or KEY2 for AES-XTS
 * @opad: OPAD or AUTH KEY if auth_input_type = 1
 */
struct auth_keys {
	union {
		u8 ipad[64];
		u8 key2[64];
	} u;
	u8 opad[64];
};

/**
 * struct flexi_crypto_context - Crypto context
 * @cipher_type: Encryption cipher type
 * @aes_keylen: AES key length
 * @iv_source: Encryption IV source
 * @hash_type: Authentication type
 * @auth_input_type: Authentication input type
 *   1 - Authentication IV and KEY, microcode calculates OPAD/IPAD
 *   0 - Authentication OPAD/IPAD
 * @mac_len: mac length
 * @crypto: Crypto keys
 * @auth: Authentication keys
 */
struct flexi_crypto_context {
	union {
		__be64 flags;
		struct {
#if defined(__BIG_ENDIAN_BITFIELD)
			u64 cipher_type	: 4;
			u64 reserved_59	: 1;
			u64 aes_keylen : 2;
			u64 iv_source : 1;
			u64 hash_type : 4;
			u64 reserved_49_51 : 3;
			u64 auth_input_type: 1;
			u64 mac_len : 8;
			u64 reserved_0_39 : 40;
#else
			u64 reserved_0_39 : 40;
			u64 mac_len : 8;
			u64 auth_input_type: 1;
			u64 reserved_49_51 : 3;
			u64 hash_type : 4;
			u64 iv_source : 1;
			u64 aes_keylen : 2;
			u64 reserved_59	: 1;
			u64 cipher_type	: 4;
#endif
		} w0;
	};

	struct crypto_keys crypto;
	struct auth_keys auth;
};

struct nitrox_crypto_ctx {
	struct nitrox_device *ndev;
	union {
		u64 ctx_handle;
		struct flexi_crypto_context *fctx;
	} u;
};

struct nitrox_kcrypt_request {
	struct se_crypto_request creq;
	struct nitrox_crypto_ctx *nctx;
	struct skcipher_request *skreq;
};

/**
 * struct pkt_instr_hdr - Packet Instruction Header
 * @g: Gather used
 *   When [G] is set and [GSZ] != 0, the instruction is
 *   indirect gather instruction.
 *   When [G] is set and [GSZ] = 0, the instruction is
 *   direct gather instruction.
 * @gsz: Number of pointers in the indirect gather list
 * @ihi: When set hardware duplicates the 1st 8 bytes of pkt_instr_hdr
 *   and adds them to the packet after the pkt_instr_hdr but before any UDD
 * @ssz: Not used by the input hardware. But can become slc_store_int[SSZ]
 *   when [IHI] is set.
 * @fsz: The number of front data bytes directly included in the
 *   PCIe instruction.
 * @tlen: The length of the input packet in bytes, include:
 *   - 16B pkt_hdr
 *   - Inline context bytes if any,
 *   - UDD if any,
 *   - packet payload bytes
 */
union pkt_instr_hdr {
	u64 value;
	struct {
#if defined(__BIG_ENDIAN_BITFIELD)
		u64 raz_48_63 : 16;
		u64 g : 1;
		u64 gsz	: 7;
		u64 ihi	: 1;
		u64 ssz	: 7;
		u64 raz_30_31 : 2;
		u64 fsz	: 6;
		u64 raz_16_23 : 8;
		u64 tlen : 16;
#else
		u64 tlen : 16;
		u64 raz_16_23 : 8;
		u64 fsz	: 6;
		u64 raz_30_31 : 2;
		u64 ssz	: 7;
		u64 ihi	: 1;
		u64 gsz	: 7;
		u64 g : 1;
		u64 raz_48_63 : 16;
#endif
	} s;
};

/**
 * struct pkt_hdr - Packet Input Header
 * @opcode: Request opcode (Major)
 * @arg: Request opcode (Minor)
 * @ctxc: Context control.
 * @unca: When set [UNC] is the uncertainty count for an input packet.
 *        The hardware uses uncertainty counts to predict
 *        output buffer use and avoid deadlock.
 * @info: Not used by input hardware. Available for use
 *        during SE processing.
 * @destport: The expected destination port/ring/channel for the packet.
 * @unc: Uncertainty count for an input packet.
 * @grp: SE group that will process the input packet.
 * @ctxl: Context Length in 64-bit words.
 * @uddl: User-defined data (UDD) length in bytes.
 * @ctxp: Context pointer. CTXP<63,2:0> must be zero in all cases.
 */
union pkt_hdr {
	u64 value[2];
	struct {
#if defined(__BIG_ENDIAN_BITFIELD)
		u64 opcode : 8;
		u64 arg	: 8;
		u64 ctxc : 2;
		u64 unca : 1;
		u64 raz_44 : 1;
		u64 info : 3;
		u64 destport : 9;
		u64 unc	: 8;
		u64 raz_19_23 : 5;
		u64 grp	: 3;
		u64 raz_15 : 1;
		u64 ctxl : 7;
		u64 uddl : 8;
#else
		u64 uddl : 8;
		u64 ctxl : 7;
		u64 raz_15 : 1;
		u64 grp	: 3;
		u64 raz_19_23 : 5;
		u64 unc	: 8;
		u64 destport : 9;
		u64 info : 3;
		u64 raz_44 : 1;
		u64 unca : 1;
		u64 ctxc : 2;
		u64 arg	: 8;
		u64 opcode : 8;
#endif
		__be64 ctxp;
	} s;
};

/**
 * struct slc_store_info - Solicited Paceket Output Store Information.
 * @ssz: The number of scatterlist pointers for the solicited output port
 *       packet.
 * @rptr: The result pointer for the solicited output port packet.
 *        If [SSZ]=0, [RPTR] must point directly to a buffer on the remote
 *        host that is large enough to hold the entire output packet.
 *        If [SSZ]!=0, [RPTR] must point to an array of ([SSZ]+3)/4
 *        sglist components at [RPTR] on the remote host.
 */
union slc_store_info {
	u64 value[2];
	struct {
#if defined(__BIG_ENDIAN_BITFIELD)
		u64 raz_39_63 : 25;
		u64 ssz	: 7;
		u64 raz_0_31 : 32;
#else
		u64 raz_0_31 : 32;
		u64 ssz	: 7;
		u64 raz_39_63 : 25;
#endif
		__be64 rptr;
	} s;
};

/**
 * struct nps_pkt_instr - NPS Packet Instruction of SE cores.
 * @dptr0 : Input pointer points to buffer in remote host.
 * @ih: Packet Instruction Header (8 bytes)
 * @irh: Packet Input Header (16 bytes)
 * @slc: Solicited Packet Output Store Information (16 bytes)
 * @fdata: Front data
 *
 * 64-Byte Instruction Format
 */
struct nps_pkt_instr {
	__be64 dptr0;
	union pkt_instr_hdr ih;
	union pkt_hdr irh;
	union slc_store_info slc;
	u64 fdata[2];
};

/**
 * struct ctx_hdr - Book keeping data about the crypto context
 * @pool: Pool used to allocate crypto context
 * @dma: Base DMA address of the cypto context
 * @ctx_dma: Actual usable crypto context for NITROX
 */
struct ctx_hdr {
	struct dma_pool *pool;
	dma_addr_t dma;
	dma_addr_t ctx_dma;
};

/*
 * struct sglist_component - SG list component format
 * @len0: The number of bytes at [PTR0] on the remote host.
 * @len1: The number of bytes at [PTR1] on the remote host.
 * @len2: The number of bytes at [PTR2] on the remote host.
 * @len3: The number of bytes at [PTR3] on the remote host.
 * @dma0: First pointer point to buffer in remote host.
 * @dma1: Second pointer point to buffer in remote host.
 * @dma2: Third pointer point to buffer in remote host.
 * @dma3: Fourth pointer point to buffer in remote host.
 */
struct nitrox_sgcomp {
	__be16 len[4];
	__be64 dma[4];
};

/*
 * strutct nitrox_sgtable - SG list information
 * @map_cnt: Number of buffers mapped
 * @nr_comp: Number of sglist components
 * @total_bytes: Total bytes in sglist.
 * @len: Total sglist components length.
 * @dma: DMA address of sglist component.
 * @dir: DMA direction.
 * @buf: crypto request buffer.
 * @sglist: SG list of input/output buffers.
 * @sgcomp: sglist component for NITROX.
 */
struct nitrox_sgtable {
	u8 map_bufs_cnt;
	u8 nr_sgcomp;
	u16 total_bytes;
	u32 len;
	dma_addr_t dma;
	enum dma_data_direction dir;

	struct scatterlist *buf;
	struct nitrox_sglist *sglist;
	struct nitrox_sgcomp *sgcomp;
};

/* Response Header Length */
#define ORH_HLEN	8
/* Completion bytes Length */
#define COMP_HLEN	8

struct resp_hdr {
	u64 orh;
	dma_addr_t orh_dma;
	u64 completion;
	dma_addr_t completion_dma;
};

typedef void (*completion_t)(struct skcipher_request *skreq, int err);

/**
 * struct nitrox_softreq - Represents the NIROX Request.
 * @response: response list entry
 * @backlog: Backlog list entry
 * @ndev: Device used to submit the request
 * @cmdq: Command queue for submission
 * @resp: Response headers
 * @instr: 64B instruction
 * @in: SG table for input
 * @out SG table for output
 * @tstamp: Request submitted time in jiffies
 * @callback: callback after request completion/timeout
 * @cb_arg: callback argument
 */
struct nitrox_softreq {
	struct list_head response;
	struct list_head backlog;

	u32 flags;
	gfp_t gfp;
	atomic_t status;
	bool inplace;

	struct nitrox_device *ndev;
	struct nitrox_cmdq *cmdq;

	struct nps_pkt_instr instr;
	struct resp_hdr resp;
	struct nitrox_sgtable in;
	struct nitrox_sgtable out;

	unsigned long tstamp;

	completion_t callback;
	struct skcipher_request *skreq;
};

#endif /* __NITROX_REQ_H */