| /* | |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 and | |
| * only version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/platform_device.h> | |
| #include "dsi_phy.h" | |
| #define S_DIV_ROUND_UP(n, d) \ | |
| (((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d))) | |
| static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent, | |
| s32 min_result, bool even) | |
| { | |
| s32 v; | |
| v = (tmax - tmin) * percent; | |
| v = S_DIV_ROUND_UP(v, 100) + tmin; | |
| if (even && (v & 0x1)) | |
| return max_t(s32, min_result, v - 1); | |
| else | |
| return max_t(s32, min_result, v); | |
| } | |
| static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing, | |
| s32 ui, s32 coeff, s32 pcnt) | |
| { | |
| s32 tmax, tmin, clk_z; | |
| s32 temp; | |
| /* reset */ | |
| temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui; | |
| tmin = S_DIV_ROUND_UP(temp, ui) - 2; | |
| if (tmin > 255) { | |
| tmax = 511; | |
| clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true); | |
| } else { | |
| tmax = 255; | |
| clk_z = linear_inter(tmax, tmin, pcnt, 0, true); | |
| } | |
| /* adjust */ | |
| temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7; | |
| timing->clk_zero = clk_z + 8 - temp; | |
| } | |
| int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing, | |
| struct msm_dsi_phy_clk_request *clk_req) | |
| { | |
| const unsigned long bit_rate = clk_req->bitclk_rate; | |
| const unsigned long esc_rate = clk_req->escclk_rate; | |
| s32 ui, lpx; | |
| s32 tmax, tmin; | |
| s32 pcnt0 = 10; | |
| s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10; | |
| s32 pcnt2 = 10; | |
| s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40; | |
| s32 coeff = 1000; /* Precision, should avoid overflow */ | |
| s32 temp; | |
| if (!bit_rate || !esc_rate) | |
| return -EINVAL; | |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); | |
| lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000); | |
| tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2; | |
| tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2; | |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true); | |
| temp = lpx / ui; | |
| if (temp & 0x1) | |
| timing->hs_rqst = temp; | |
| else | |
| timing->hs_rqst = max_t(s32, 0, temp - 2); | |
| /* Calculate clk_zero after clk_prepare and hs_rqst */ | |
| dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = S_DIV_ROUND_UP(temp, ui) - 2; | |
| tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2; | |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true); | |
| temp = 85 * coeff + 6 * ui; | |
| tmax = S_DIV_ROUND_UP(temp, ui) - 2; | |
| temp = 40 * coeff + 4 * ui; | |
| tmin = S_DIV_ROUND_UP(temp, ui) - 2; | |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true); | |
| tmax = 255; | |
| temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui; | |
| temp = 145 * coeff + 10 * ui - temp; | |
| tmin = S_DIV_ROUND_UP(temp, ui) - 2; | |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = S_DIV_ROUND_UP(temp, ui) - 2; | |
| temp = 60 * coeff + 4 * ui; | |
| tmin = DIV_ROUND_UP(temp, ui) - 2; | |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true); | |
| tmax = 255; | |
| tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2; | |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true); | |
| tmax = 63; | |
| temp = ((timing->hs_exit >> 1) + 1) * 2 * ui; | |
| temp = 60 * coeff + 52 * ui - 24 * ui - temp; | |
| tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1; | |
| timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0, | |
| false); | |
| tmax = 63; | |
| temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui; | |
| temp += ((timing->clk_zero >> 1) + 1) * 2 * ui; | |
| temp += 8 * ui + lpx; | |
| tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1; | |
| if (tmin > tmax) { | |
| temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre = temp >> 1; | |
| timing->shared_timings.clk_pre_inc_by_2 = true; | |
| } else { | |
| timing->shared_timings.clk_pre = | |
| linear_inter(tmax, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre_inc_by_2 = false; | |
| } | |
| timing->ta_go = 3; | |
| timing->ta_sure = 0; | |
| timing->ta_get = 4; | |
| DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", | |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, | |
| timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, | |
| timing->clk_trail, timing->clk_prepare, timing->hs_exit, | |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, | |
| timing->hs_rqst); | |
| return 0; | |
| } | |
| int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing, | |
| struct msm_dsi_phy_clk_request *clk_req) | |
| { | |
| const unsigned long bit_rate = clk_req->bitclk_rate; | |
| const unsigned long esc_rate = clk_req->escclk_rate; | |
| s32 ui, ui_x8, lpx; | |
| s32 tmax, tmin; | |
| s32 pcnt0 = 50; | |
| s32 pcnt1 = 50; | |
| s32 pcnt2 = 10; | |
| s32 pcnt3 = 30; | |
| s32 pcnt4 = 10; | |
| s32 pcnt5 = 2; | |
| s32 coeff = 1000; /* Precision, should avoid overflow */ | |
| s32 hb_en, hb_en_ckln, pd_ckln, pd; | |
| s32 val, val_ckln; | |
| s32 temp; | |
| if (!bit_rate || !esc_rate) | |
| return -EINVAL; | |
| timing->hs_halfbyte_en = 0; | |
| hb_en = 0; | |
| timing->hs_halfbyte_en_ckln = 0; | |
| hb_en_ckln = 0; | |
| timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3; | |
| pd_ckln = timing->hs_prep_dly_ckln; | |
| timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1; | |
| pd = timing->hs_prep_dly; | |
| val = (hb_en << 2) + (pd << 1); | |
| val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1); | |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); | |
| ui_x8 = ui << 3; | |
| lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000); | |
| temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8); | |
| tmin = max_t(s32, temp, 0); | |
| temp = (95 * coeff - val_ckln * ui) / ui_x8; | |
| tmax = max_t(s32, temp, 0); | |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false); | |
| temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui; | |
| tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3; | |
| tmax = (tmin > 255) ? 511 : 255; | |
| timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false); | |
| tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = (temp + 3 * ui) / ui_x8; | |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false); | |
| temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8); | |
| tmin = max_t(s32, temp, 0); | |
| temp = (85 * coeff + 6 * ui - val * ui) / ui_x8; | |
| tmax = max_t(s32, temp, 0); | |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false); | |
| temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui; | |
| tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3; | |
| tmax = 255; | |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false); | |
| tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = (temp + 3 * ui) / ui_x8; | |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false); | |
| temp = 50 * coeff + ((hb_en << 2) - 8) * ui; | |
| timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); | |
| tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; | |
| tmax = 255; | |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false); | |
| temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui; | |
| timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8); | |
| temp = 60 * coeff + 52 * ui - 43 * ui; | |
| tmin = DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = 63; | |
| timing->shared_timings.clk_post = | |
| linear_inter(tmax, tmin, pcnt2, 0, false); | |
| temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui; | |
| temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui; | |
| temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) : | |
| (((timing->hs_rqst_ckln << 3) + 8) * ui); | |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = 63; | |
| if (tmin > tmax) { | |
| temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre = temp >> 1; | |
| timing->shared_timings.clk_pre_inc_by_2 = 1; | |
| } else { | |
| timing->shared_timings.clk_pre = | |
| linear_inter(tmax, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre_inc_by_2 = 0; | |
| } | |
| timing->ta_go = 3; | |
| timing->ta_sure = 0; | |
| timing->ta_get = 4; | |
| DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", | |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, | |
| timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, | |
| timing->clk_trail, timing->clk_prepare, timing->hs_exit, | |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, | |
| timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en, | |
| timing->hs_halfbyte_en_ckln, timing->hs_prep_dly, | |
| timing->hs_prep_dly_ckln); | |
| return 0; | |
| } | |
| void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg, | |
| u32 bit_mask) | |
| { | |
| int phy_id = phy->id; | |
| u32 val; | |
| if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX)) | |
| return; | |
| val = dsi_phy_read(phy->base + reg); | |
| if (phy->cfg->src_pll_truthtable[phy_id][pll_id]) | |
| dsi_phy_write(phy->base + reg, val | bit_mask); | |
| else | |
| dsi_phy_write(phy->base + reg, val & (~bit_mask)); | |
| } | |
| static int dsi_phy_regulator_init(struct msm_dsi_phy *phy) | |
| { | |
| struct regulator_bulk_data *s = phy->supplies; | |
| const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; | |
| struct device *dev = &phy->pdev->dev; | |
| int num = phy->cfg->reg_cfg.num; | |
| int i, ret; | |
| for (i = 0; i < num; i++) | |
| s[i].supply = regs[i].name; | |
| ret = devm_regulator_bulk_get(dev, num, s); | |
| if (ret < 0) { | |
| dev_err(dev, "%s: failed to init regulator, ret=%d\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy) | |
| { | |
| struct regulator_bulk_data *s = phy->supplies; | |
| const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; | |
| int num = phy->cfg->reg_cfg.num; | |
| int i; | |
| DBG(""); | |
| for (i = num - 1; i >= 0; i--) | |
| if (regs[i].disable_load >= 0) | |
| regulator_set_load(s[i].consumer, regs[i].disable_load); | |
| regulator_bulk_disable(num, s); | |
| } | |
| static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy) | |
| { | |
| struct regulator_bulk_data *s = phy->supplies; | |
| const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; | |
| struct device *dev = &phy->pdev->dev; | |
| int num = phy->cfg->reg_cfg.num; | |
| int ret, i; | |
| DBG(""); | |
| for (i = 0; i < num; i++) { | |
| if (regs[i].enable_load >= 0) { | |
| ret = regulator_set_load(s[i].consumer, | |
| regs[i].enable_load); | |
| if (ret < 0) { | |
| dev_err(dev, | |
| "regulator %d set op mode failed, %d\n", | |
| i, ret); | |
| goto fail; | |
| } | |
| } | |
| } | |
| ret = regulator_bulk_enable(num, s); | |
| if (ret < 0) { | |
| dev_err(dev, "regulator enable failed, %d\n", ret); | |
| goto fail; | |
| } | |
| return 0; | |
| fail: | |
| for (i--; i >= 0; i--) | |
| regulator_set_load(s[i].consumer, regs[i].disable_load); | |
| return ret; | |
| } | |
| static int dsi_phy_enable_resource(struct msm_dsi_phy *phy) | |
| { | |
| struct device *dev = &phy->pdev->dev; | |
| int ret; | |
| pm_runtime_get_sync(dev); | |
| ret = clk_prepare_enable(phy->ahb_clk); | |
| if (ret) { | |
| dev_err(dev, "%s: can't enable ahb clk, %d\n", __func__, ret); | |
| pm_runtime_put_sync(dev); | |
| } | |
| return ret; | |
| } | |
| static void dsi_phy_disable_resource(struct msm_dsi_phy *phy) | |
| { | |
| clk_disable_unprepare(phy->ahb_clk); | |
| pm_runtime_put_autosuspend(&phy->pdev->dev); | |
| } | |
| static const struct of_device_id dsi_phy_dt_match[] = { | |
| #ifdef CONFIG_DRM_MSM_DSI_28NM_PHY | |
| { .compatible = "qcom,dsi-phy-28nm-hpm", | |
| .data = &dsi_phy_28nm_hpm_cfgs }, | |
| { .compatible = "qcom,dsi-phy-28nm-lp", | |
| .data = &dsi_phy_28nm_lp_cfgs }, | |
| #endif | |
| #ifdef CONFIG_DRM_MSM_DSI_20NM_PHY | |
| { .compatible = "qcom,dsi-phy-20nm", | |
| .data = &dsi_phy_20nm_cfgs }, | |
| #endif | |
| #ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY | |
| { .compatible = "qcom,dsi-phy-28nm-8960", | |
| .data = &dsi_phy_28nm_8960_cfgs }, | |
| #endif | |
| #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY | |
| { .compatible = "qcom,dsi-phy-14nm", | |
| .data = &dsi_phy_14nm_cfgs }, | |
| #endif | |
| {} | |
| }; | |
| /* | |
| * Currently, we only support one SoC for each PHY type. When we have multiple | |
| * SoCs for the same PHY, we can try to make the index searching a bit more | |
| * clever. | |
| */ | |
| static int dsi_phy_get_id(struct msm_dsi_phy *phy) | |
| { | |
| struct platform_device *pdev = phy->pdev; | |
| const struct msm_dsi_phy_cfg *cfg = phy->cfg; | |
| struct resource *res; | |
| int i; | |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy"); | |
| if (!res) | |
| return -EINVAL; | |
| for (i = 0; i < cfg->num_dsi_phy; i++) { | |
| if (cfg->io_start[i] == res->start) | |
| return i; | |
| } | |
| return -EINVAL; | |
| } | |
| int msm_dsi_phy_init_common(struct msm_dsi_phy *phy) | |
| { | |
| struct platform_device *pdev = phy->pdev; | |
| int ret = 0; | |
| phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator", | |
| "DSI_PHY_REG"); | |
| if (IS_ERR(phy->reg_base)) { | |
| dev_err(&pdev->dev, "%s: failed to map phy regulator base\n", | |
| __func__); | |
| ret = -ENOMEM; | |
| goto fail; | |
| } | |
| fail: | |
| return ret; | |
| } | |
| static int dsi_phy_driver_probe(struct platform_device *pdev) | |
| { | |
| struct msm_dsi_phy *phy; | |
| struct device *dev = &pdev->dev; | |
| const struct of_device_id *match; | |
| int ret; | |
| phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); | |
| if (!phy) | |
| return -ENOMEM; | |
| match = of_match_node(dsi_phy_dt_match, dev->of_node); | |
| if (!match) | |
| return -ENODEV; | |
| phy->cfg = match->data; | |
| phy->pdev = pdev; | |
| phy->id = dsi_phy_get_id(phy); | |
| if (phy->id < 0) { | |
| ret = phy->id; | |
| dev_err(dev, "%s: couldn't identify PHY index, %d\n", | |
| __func__, ret); | |
| goto fail; | |
| } | |
| phy->regulator_ldo_mode = of_property_read_bool(dev->of_node, | |
| "qcom,dsi-phy-regulator-ldo-mode"); | |
| phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); | |
| if (IS_ERR(phy->base)) { | |
| dev_err(dev, "%s: failed to map phy base\n", __func__); | |
| ret = -ENOMEM; | |
| goto fail; | |
| } | |
| ret = dsi_phy_regulator_init(phy); | |
| if (ret) { | |
| dev_err(dev, "%s: failed to init regulator\n", __func__); | |
| goto fail; | |
| } | |
| phy->ahb_clk = devm_clk_get(dev, "iface_clk"); | |
| if (IS_ERR(phy->ahb_clk)) { | |
| dev_err(dev, "%s: Unable to get ahb clk\n", __func__); | |
| ret = PTR_ERR(phy->ahb_clk); | |
| goto fail; | |
| } | |
| if (phy->cfg->ops.init) { | |
| ret = phy->cfg->ops.init(phy); | |
| if (ret) | |
| goto fail; | |
| } | |
| /* PLL init will call into clk_register which requires | |
| * register access, so we need to enable power and ahb clock. | |
| */ | |
| ret = dsi_phy_enable_resource(phy); | |
| if (ret) | |
| goto fail; | |
| phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id); | |
| if (!phy->pll) | |
| dev_info(dev, | |
| "%s: pll init failed, need separate pll clk driver\n", | |
| __func__); | |
| dsi_phy_disable_resource(phy); | |
| platform_set_drvdata(pdev, phy); | |
| return 0; | |
| fail: | |
| return ret; | |
| } | |
| static int dsi_phy_driver_remove(struct platform_device *pdev) | |
| { | |
| struct msm_dsi_phy *phy = platform_get_drvdata(pdev); | |
| if (phy && phy->pll) { | |
| msm_dsi_pll_destroy(phy->pll); | |
| phy->pll = NULL; | |
| } | |
| platform_set_drvdata(pdev, NULL); | |
| return 0; | |
| } | |
| static struct platform_driver dsi_phy_platform_driver = { | |
| .probe = dsi_phy_driver_probe, | |
| .remove = dsi_phy_driver_remove, | |
| .driver = { | |
| .name = "msm_dsi_phy", | |
| .of_match_table = dsi_phy_dt_match, | |
| }, | |
| }; | |
| void __init msm_dsi_phy_driver_register(void) | |
| { | |
| platform_driver_register(&dsi_phy_platform_driver); | |
| } | |
| void __exit msm_dsi_phy_driver_unregister(void) | |
| { | |
| platform_driver_unregister(&dsi_phy_platform_driver); | |
| } | |
| int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id, | |
| struct msm_dsi_phy_clk_request *clk_req) | |
| { | |
| struct device *dev = &phy->pdev->dev; | |
| int ret; | |
| if (!phy || !phy->cfg->ops.enable) | |
| return -EINVAL; | |
| ret = dsi_phy_enable_resource(phy); | |
| if (ret) { | |
| dev_err(dev, "%s: resource enable failed, %d\n", | |
| __func__, ret); | |
| goto res_en_fail; | |
| } | |
| ret = dsi_phy_regulator_enable(phy); | |
| if (ret) { | |
| dev_err(dev, "%s: regulator enable failed, %d\n", | |
| __func__, ret); | |
| goto reg_en_fail; | |
| } | |
| ret = phy->cfg->ops.enable(phy, src_pll_id, clk_req); | |
| if (ret) { | |
| dev_err(dev, "%s: phy enable failed, %d\n", __func__, ret); | |
| goto phy_en_fail; | |
| } | |
| /* | |
| * Resetting DSI PHY silently changes its PLL registers to reset status, | |
| * which will confuse clock driver and result in wrong output rate of | |
| * link clocks. Restore PLL status if its PLL is being used as clock | |
| * source. | |
| */ | |
| if (phy->usecase != MSM_DSI_PHY_SLAVE) { | |
| ret = msm_dsi_pll_restore_state(phy->pll); | |
| if (ret) { | |
| dev_err(dev, "%s: failed to restore pll state, %d\n", | |
| __func__, ret); | |
| goto pll_restor_fail; | |
| } | |
| } | |
| return 0; | |
| pll_restor_fail: | |
| if (phy->cfg->ops.disable) | |
| phy->cfg->ops.disable(phy); | |
| phy_en_fail: | |
| dsi_phy_regulator_disable(phy); | |
| reg_en_fail: | |
| dsi_phy_disable_resource(phy); | |
| res_en_fail: | |
| return ret; | |
| } | |
| void msm_dsi_phy_disable(struct msm_dsi_phy *phy) | |
| { | |
| if (!phy || !phy->cfg->ops.disable) | |
| return; | |
| /* Save PLL status if it is a clock source */ | |
| if (phy->usecase != MSM_DSI_PHY_SLAVE) | |
| msm_dsi_pll_save_state(phy->pll); | |
| phy->cfg->ops.disable(phy); | |
| dsi_phy_regulator_disable(phy); | |
| dsi_phy_disable_resource(phy); | |
| } | |
| void msm_dsi_phy_get_shared_timings(struct msm_dsi_phy *phy, | |
| struct msm_dsi_phy_shared_timings *shared_timings) | |
| { | |
| memcpy(shared_timings, &phy->timing.shared_timings, | |
| sizeof(*shared_timings)); | |
| } | |
| struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy) | |
| { | |
| if (!phy) | |
| return NULL; | |
| return phy->pll; | |
| } | |
| void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy, | |
| enum msm_dsi_phy_usecase uc) | |
| { | |
| if (phy) | |
| phy->usecase = uc; | |
| } |