| /* | |
| * Copyright (C) 2015 Broadcom | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| /** | |
| * DOC: VC4 KMS | |
| * | |
| * This is the general code for implementing KMS mode setting that | |
| * doesn't clearly associate with any of the other objects (plane, | |
| * crtc, HDMI encoder). | |
| */ | |
| #include <drm/drm_crtc.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_crtc_helper.h> | |
| #include <drm/drm_plane_helper.h> | |
| #include <drm/drm_fb_cma_helper.h> | |
| #include <drm/drm_gem_framebuffer_helper.h> | |
| #include "vc4_drv.h" | |
| static void vc4_output_poll_changed(struct drm_device *dev) | |
| { | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| drm_fbdev_cma_hotplug_event(vc4->fbdev); | |
| } | |
| static void | |
| vc4_atomic_complete_commit(struct drm_atomic_state *state) | |
| { | |
| struct drm_device *dev = state->dev; | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| drm_atomic_helper_wait_for_fences(dev, state, false); | |
| drm_atomic_helper_wait_for_dependencies(state); | |
| drm_atomic_helper_commit_modeset_disables(dev, state); | |
| drm_atomic_helper_commit_planes(dev, state, 0); | |
| drm_atomic_helper_commit_modeset_enables(dev, state); | |
| /* Make sure that drm_atomic_helper_wait_for_vblanks() | |
| * actually waits for vblank. If we're doing a full atomic | |
| * modeset (as opposed to a vc4_update_plane() short circuit), | |
| * then we need to wait for scanout to be done with our | |
| * display lists before we free it and potentially reallocate | |
| * and overwrite the dlist memory with a new modeset. | |
| */ | |
| state->legacy_cursor_update = false; | |
| drm_atomic_helper_commit_hw_done(state); | |
| drm_atomic_helper_wait_for_vblanks(dev, state); | |
| drm_atomic_helper_cleanup_planes(dev, state); | |
| drm_atomic_helper_commit_cleanup_done(state); | |
| drm_atomic_state_put(state); | |
| up(&vc4->async_modeset); | |
| } | |
| static void commit_work(struct work_struct *work) | |
| { | |
| struct drm_atomic_state *state = container_of(work, | |
| struct drm_atomic_state, | |
| commit_work); | |
| vc4_atomic_complete_commit(state); | |
| } | |
| /** | |
| * vc4_atomic_commit - commit validated state object | |
| * @dev: DRM device | |
| * @state: the driver state object | |
| * @nonblock: nonblocking commit | |
| * | |
| * This function commits a with drm_atomic_helper_check() pre-validated state | |
| * object. This can still fail when e.g. the framebuffer reservation fails. For | |
| * now this doesn't implement asynchronous commits. | |
| * | |
| * RETURNS | |
| * Zero for success or -errno. | |
| */ | |
| static int vc4_atomic_commit(struct drm_device *dev, | |
| struct drm_atomic_state *state, | |
| bool nonblock) | |
| { | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| int ret; | |
| ret = drm_atomic_helper_setup_commit(state, nonblock); | |
| if (ret) | |
| return ret; | |
| INIT_WORK(&state->commit_work, commit_work); | |
| ret = down_interruptible(&vc4->async_modeset); | |
| if (ret) | |
| return ret; | |
| ret = drm_atomic_helper_prepare_planes(dev, state); | |
| if (ret) { | |
| up(&vc4->async_modeset); | |
| return ret; | |
| } | |
| if (!nonblock) { | |
| ret = drm_atomic_helper_wait_for_fences(dev, state, true); | |
| if (ret) { | |
| drm_atomic_helper_cleanup_planes(dev, state); | |
| up(&vc4->async_modeset); | |
| return ret; | |
| } | |
| } | |
| /* | |
| * This is the point of no return - everything below never fails except | |
| * when the hw goes bonghits. Which means we can commit the new state on | |
| * the software side now. | |
| */ | |
| BUG_ON(drm_atomic_helper_swap_state(state, false) < 0); | |
| /* | |
| * Everything below can be run asynchronously without the need to grab | |
| * any modeset locks at all under one condition: It must be guaranteed | |
| * that the asynchronous work has either been cancelled (if the driver | |
| * supports it, which at least requires that the framebuffers get | |
| * cleaned up with drm_atomic_helper_cleanup_planes()) or completed | |
| * before the new state gets committed on the software side with | |
| * drm_atomic_helper_swap_state(). | |
| * | |
| * This scheme allows new atomic state updates to be prepared and | |
| * checked in parallel to the asynchronous completion of the previous | |
| * update. Which is important since compositors need to figure out the | |
| * composition of the next frame right after having submitted the | |
| * current layout. | |
| */ | |
| drm_atomic_state_get(state); | |
| if (nonblock) | |
| queue_work(system_unbound_wq, &state->commit_work); | |
| else | |
| vc4_atomic_complete_commit(state); | |
| return 0; | |
| } | |
| static struct drm_framebuffer *vc4_fb_create(struct drm_device *dev, | |
| struct drm_file *file_priv, | |
| const struct drm_mode_fb_cmd2 *mode_cmd) | |
| { | |
| struct drm_mode_fb_cmd2 mode_cmd_local; | |
| /* If the user didn't specify a modifier, use the | |
| * vc4_set_tiling_ioctl() state for the BO. | |
| */ | |
| if (!(mode_cmd->flags & DRM_MODE_FB_MODIFIERS)) { | |
| struct drm_gem_object *gem_obj; | |
| struct vc4_bo *bo; | |
| gem_obj = drm_gem_object_lookup(file_priv, | |
| mode_cmd->handles[0]); | |
| if (!gem_obj) { | |
| DRM_DEBUG("Failed to look up GEM BO %d\n", | |
| mode_cmd->handles[0]); | |
| return ERR_PTR(-ENOENT); | |
| } | |
| bo = to_vc4_bo(gem_obj); | |
| mode_cmd_local = *mode_cmd; | |
| if (bo->t_format) { | |
| mode_cmd_local.modifier[0] = | |
| DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED; | |
| } else { | |
| mode_cmd_local.modifier[0] = DRM_FORMAT_MOD_NONE; | |
| } | |
| drm_gem_object_put_unlocked(gem_obj); | |
| mode_cmd = &mode_cmd_local; | |
| } | |
| return drm_gem_fb_create(dev, file_priv, mode_cmd); | |
| } | |
| static const struct drm_mode_config_funcs vc4_mode_funcs = { | |
| .output_poll_changed = vc4_output_poll_changed, | |
| .atomic_check = drm_atomic_helper_check, | |
| .atomic_commit = vc4_atomic_commit, | |
| .fb_create = vc4_fb_create, | |
| }; | |
| int vc4_kms_load(struct drm_device *dev) | |
| { | |
| struct vc4_dev *vc4 = to_vc4_dev(dev); | |
| int ret; | |
| sema_init(&vc4->async_modeset, 1); | |
| /* Set support for vblank irq fast disable, before drm_vblank_init() */ | |
| dev->vblank_disable_immediate = true; | |
| ret = drm_vblank_init(dev, dev->mode_config.num_crtc); | |
| if (ret < 0) { | |
| dev_err(dev->dev, "failed to initialize vblank\n"); | |
| return ret; | |
| } | |
| dev->mode_config.max_width = 2048; | |
| dev->mode_config.max_height = 2048; | |
| dev->mode_config.funcs = &vc4_mode_funcs; | |
| dev->mode_config.preferred_depth = 24; | |
| dev->mode_config.async_page_flip = true; | |
| drm_mode_config_reset(dev); | |
| if (dev->mode_config.num_connector) { | |
| vc4->fbdev = drm_fbdev_cma_init(dev, 32, | |
| dev->mode_config.num_connector); | |
| if (IS_ERR(vc4->fbdev)) | |
| vc4->fbdev = NULL; | |
| } | |
| drm_kms_helper_poll_init(dev); | |
| return 0; | |
| } |