| # | |
| # Accelerometer drivers | |
| # | |
| # When adding new entries keep the list in alphabetical order | |
| menu "Accelerometers" | |
| config ADXL345 | |
| tristate | |
| config ADXL345_I2C | |
| tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver" | |
| depends on INPUT_ADXL34X=n | |
| depends on I2C | |
| select ADXL345 | |
| select REGMAP_I2C | |
| help | |
| Say Y here if you want to build support for the Analog Devices | |
| ADXL345 3-axis digital accelerometer. | |
| To compile this driver as a module, choose M here: the module | |
| will be called adxl345_i2c and you will also get adxl345_core | |
| for the core module. | |
| config ADXL345_SPI | |
| tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer SPI Driver" | |
| depends on INPUT_ADXL34X=n | |
| depends on SPI | |
| select ADXL345 | |
| select REGMAP_SPI | |
| help | |
| Say Y here if you want to build support for the Analog Devices | |
| ADXL345 3-axis digital accelerometer. | |
| To compile this driver as a module, choose M here: the module | |
| will be called adxl345_spi and you will also get adxl345_core | |
| for the core module. | |
| config BMA180 | |
| tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say Y here if you want to build a driver for the Bosch BMA180 or | |
| BMA250 triaxial acceleration sensor. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bma180. | |
| config BMA220 | |
| tristate "Bosch BMA220 3-Axis Accelerometer Driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to add support for the Bosch BMA220 triaxial | |
| acceleration sensor. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bma220_spi. | |
| config BMC150_ACCEL | |
| tristate "Bosch BMC150 Accelerometer Driver" | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| select REGMAP | |
| select BMC150_ACCEL_I2C if I2C | |
| select BMC150_ACCEL_SPI if SPI | |
| help | |
| Say yes here to build support for the following Bosch accelerometers: | |
| BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. | |
| This is a combo module with both accelerometer and magnetometer. | |
| This driver is only implementing accelerometer part, which has | |
| its own address and register map. | |
| config BMC150_ACCEL_I2C | |
| tristate | |
| select REGMAP_I2C | |
| config BMC150_ACCEL_SPI | |
| tristate | |
| select REGMAP_SPI | |
| config DA280 | |
| tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit | |
| digital accelerometer. | |
| To compile this driver as a module, choose M here: the | |
| module will be called da280. | |
| config DA311 | |
| tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit | |
| digital accelerometer. | |
| To compile this driver as a module, choose M here: the | |
| module will be called da311. | |
| config DMARD06 | |
| tristate "Domintech DMARD06 Digital Accelerometer Driver" | |
| depends on OF || COMPILE_TEST | |
| depends on I2C | |
| help | |
| Say yes here to build support for the Domintech low-g tri-axial | |
| digital accelerometers: DMARD05, DMARD06, DMARD07. | |
| To compile this driver as a module, choose M here: the | |
| module will be called dmard06. | |
| config DMARD09 | |
| tristate "Domintech DMARD09 3-axis Accelerometer Driver" | |
| depends on I2C | |
| help | |
| Say yes here to get support for the Domintech DMARD09 3-axis | |
| accelerometer. | |
| Choosing M will build the driver as a module. If so, the module | |
| will be called dmard09. | |
| config DMARD10 | |
| tristate "Domintech DMARD10 3-axis Accelerometer Driver" | |
| depends on I2C | |
| help | |
| Say yes here to get support for the Domintech DMARD10 3-axis | |
| accelerometer. | |
| Choosing M will build the driver as a module. If so, the module | |
| will be called dmard10. | |
| config HID_SENSOR_ACCEL_3D | |
| depends on HID_SENSOR_HUB | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| select HID_SENSOR_IIO_COMMON | |
| select HID_SENSOR_IIO_TRIGGER | |
| tristate "HID Accelerometers 3D" | |
| help | |
| Say yes here to build support for the HID SENSOR | |
| accelerometers 3D. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-sensor-accel-3d. | |
| config IIO_ST_ACCEL_3AXIS | |
| tristate "STMicroelectronics accelerometers 3-Axis Driver" | |
| depends on (I2C || SPI_MASTER) && SYSFS | |
| depends on !SENSORS_LIS3_I2C | |
| depends on !SENSORS_LIS3_SPI | |
| select IIO_ST_SENSORS_CORE | |
| select IIO_ST_ACCEL_I2C_3AXIS if (I2C) | |
| select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER) | |
| select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) | |
| help | |
| Say yes here to build support for STMicroelectronics accelerometers: | |
| LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, | |
| LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL, | |
| LNG2DM | |
| This driver can also be built as a module. If so, these modules | |
| will be created: | |
| - st_accel (core functions for the driver [it is mandatory]); | |
| - st_accel_i2c (necessary for the I2C devices [optional*]); | |
| - st_accel_spi (necessary for the SPI devices [optional*]); | |
| (*) one of these is necessary to do something. | |
| config IIO_ST_ACCEL_I2C_3AXIS | |
| tristate | |
| depends on IIO_ST_ACCEL_3AXIS | |
| depends on IIO_ST_SENSORS_I2C | |
| config IIO_ST_ACCEL_SPI_3AXIS | |
| tristate | |
| depends on IIO_ST_ACCEL_3AXIS | |
| depends on IIO_ST_SENSORS_SPI | |
| config KXSD9 | |
| tristate "Kionix KXSD9 Accelerometer Driver" | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for the Kionix KXSD9 accelerometer. | |
| It can be accessed using an (optional) SPI or I2C interface. | |
| To compile this driver as a module, choose M here: the module | |
| will be called kxsd9. | |
| config KXSD9_SPI | |
| tristate "Kionix KXSD9 SPI transport" | |
| depends on KXSD9 | |
| depends on SPI | |
| default KXSD9 | |
| select REGMAP_SPI | |
| help | |
| Say yes here to enable the Kionix KXSD9 accelerometer | |
| SPI transport channel. | |
| config KXSD9_I2C | |
| tristate "Kionix KXSD9 I2C transport" | |
| depends on KXSD9 | |
| depends on I2C | |
| default KXSD9 | |
| select REGMAP_I2C | |
| help | |
| Say yes here to enable the Kionix KXSD9 accelerometer | |
| I2C transport channel. | |
| config KXCJK1013 | |
| tristate "Kionix 3-Axis Accelerometer Driver" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say Y here if you want to build a driver for the Kionix KXCJK-1013 | |
| triaxial acceleration sensor. This driver also supports KXCJ9-1008 | |
| and KXTJ2-1009. | |
| To compile this driver as a module, choose M here: the module will | |
| be called kxcjk-1013. | |
| config MC3230 | |
| tristate "mCube MC3230 Digital Accelerometer Driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for the mCube MC3230 low-g tri-axial | |
| digital accelerometer. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mc3230. | |
| config MMA7455 | |
| tristate | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| config MMA7455_I2C | |
| tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver" | |
| depends on I2C | |
| select MMA7455 | |
| select REGMAP_I2C | |
| help | |
| Say yes here to build support for the Freescale MMA7455L and | |
| MMA7456L 3-axis accelerometer. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mma7455_i2c. | |
| config MMA7455_SPI | |
| tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver" | |
| depends on SPI_MASTER | |
| select MMA7455 | |
| select REGMAP_SPI | |
| help | |
| Say yes here to build support for the Freescale MMA7455L and | |
| MMA7456L 3-axis accelerometer. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mma7455_spi. | |
| config MMA7660 | |
| tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver" | |
| depends on I2C | |
| help | |
| Say yes here to get support for the Freescale MMA7660FC 3-Axis | |
| accelerometer. | |
| Choosing M will build the driver as a module. If so, the module | |
| will be called mma7660. | |
| config MMA8452 | |
| tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for the following Freescale / NXP 3-axis | |
| accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC, | |
| FXLS8471Q. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mma8452. | |
| config MMA9551_CORE | |
| tristate | |
| config MMA9551 | |
| tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" | |
| depends on I2C | |
| select MMA9551_CORE | |
| help | |
| Say yes here to build support for the Freescale MMA9551L | |
| Intelligent Motion-Sensing Platform Driver. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mma9551. | |
| config MMA9553 | |
| tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" | |
| depends on I2C | |
| select MMA9551_CORE | |
| help | |
| Say yes here to build support for the Freescale MMA9553L | |
| Intelligent Pedometer Platform Driver. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mma9553. | |
| config MXC4005 | |
| tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| select REGMAP_I2C | |
| help | |
| Say yes here to build support for the Memsic MXC4005XC 3-axis | |
| accelerometer. | |
| To compile this driver as a module, choose M. The module will be | |
| called mxc4005. | |
| config MXC6255 | |
| tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say yes here to build support for the Memsic MXC6255 Orientation | |
| Sensing Accelerometer Driver. | |
| To compile this driver as a module, choose M here: the module will be | |
| called mxc6255. | |
| config SCA3000 | |
| select IIO_BUFFER | |
| select IIO_KFIFO_BUF | |
| depends on SPI | |
| tristate "VTI SCA3000 series accelerometers" | |
| help | |
| Say Y here to build support for the VTI SCA3000 series of SPI | |
| accelerometers. These devices use a hardware ring buffer. | |
| To compile this driver as a module, say M here: the module will be | |
| called sca3000. | |
| config STK8312 | |
| tristate "Sensortek STK8312 3-Axis Accelerometer Driver" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to get support for the Sensortek STK8312 3-axis | |
| accelerometer. | |
| Choosing M will build the driver as a module. If so, the module | |
| will be called stk8312. | |
| config STK8BA50 | |
| tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to get support for the Sensortek STK8BA50 3-axis | |
| accelerometer. | |
| Choosing M will build the driver as a module. If so, the module | |
| will be called stk8ba50. | |
| endmenu |