| /* | |
| * twl6040-vibra.c - TWL6040 Vibrator driver | |
| * | |
| * Author: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> | |
| * Author: Misael Lopez Cruz <misael.lopez@ti.com> | |
| * | |
| * Copyright: (C) 2011 Texas Instruments, Inc. | |
| * | |
| * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com> | |
| * Felipe Balbi <felipe.balbi@nokia.com> | |
| * Jari Vanhala <ext-javi.vanhala@nokia.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
| * 02110-1301 USA | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/of.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/input.h> | |
| #include <linux/mfd/twl6040.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/regulator/consumer.h> | |
| #define EFFECT_DIR_180_DEG 0x8000 | |
| /* Recommended modulation index 85% */ | |
| #define TWL6040_VIBRA_MOD 85 | |
| #define TWL6040_NUM_SUPPLIES 2 | |
| struct vibra_info { | |
| struct device *dev; | |
| struct input_dev *input_dev; | |
| struct work_struct play_work; | |
| int irq; | |
| bool enabled; | |
| int weak_speed; | |
| int strong_speed; | |
| int direction; | |
| unsigned int vibldrv_res; | |
| unsigned int vibrdrv_res; | |
| unsigned int viblmotor_res; | |
| unsigned int vibrmotor_res; | |
| struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES]; | |
| struct twl6040 *twl6040; | |
| }; | |
| static irqreturn_t twl6040_vib_irq_handler(int irq, void *data) | |
| { | |
| struct vibra_info *info = data; | |
| struct twl6040 *twl6040 = info->twl6040; | |
| u8 status; | |
| status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS); | |
| if (status & TWL6040_VIBLOCDET) { | |
| dev_warn(info->dev, "Left Vibrator overcurrent detected\n"); | |
| twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL, | |
| TWL6040_VIBENA); | |
| } | |
| if (status & TWL6040_VIBROCDET) { | |
| dev_warn(info->dev, "Right Vibrator overcurrent detected\n"); | |
| twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR, | |
| TWL6040_VIBENA); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static void twl6040_vibra_enable(struct vibra_info *info) | |
| { | |
| struct twl6040 *twl6040 = info->twl6040; | |
| int ret; | |
| ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies); | |
| if (ret) { | |
| dev_err(info->dev, "failed to enable regulators %d\n", ret); | |
| return; | |
| } | |
| twl6040_power(info->twl6040, 1); | |
| if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) { | |
| /* | |
| * ERRATA: Disable overcurrent protection for at least | |
| * 3ms when enabling vibrator drivers to avoid false | |
| * overcurrent detection | |
| */ | |
| twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, | |
| TWL6040_VIBENA | TWL6040_VIBCTRL); | |
| twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, | |
| TWL6040_VIBENA | TWL6040_VIBCTRL); | |
| usleep_range(3000, 3500); | |
| } | |
| twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, | |
| TWL6040_VIBENA); | |
| twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, | |
| TWL6040_VIBENA); | |
| info->enabled = true; | |
| } | |
| static void twl6040_vibra_disable(struct vibra_info *info) | |
| { | |
| struct twl6040 *twl6040 = info->twl6040; | |
| twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00); | |
| twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00); | |
| twl6040_power(info->twl6040, 0); | |
| regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies); | |
| info->enabled = false; | |
| } | |
| static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res, | |
| int speed, int direction) | |
| { | |
| int vpk, max_code; | |
| u8 vibdat; | |
| /* output swing */ | |
| vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) / | |
| (100 * (vibdrv_res + motor_res)); | |
| /* 50mV per VIBDAT code step */ | |
| max_code = vpk / 50; | |
| if (max_code > TWL6040_VIBDAT_MAX) | |
| max_code = TWL6040_VIBDAT_MAX; | |
| /* scale speed to max allowed code */ | |
| vibdat = (u8)((speed * max_code) / USHRT_MAX); | |
| /* 2's complement for direction > 180 degrees */ | |
| vibdat *= direction; | |
| return vibdat; | |
| } | |
| static void twl6040_vibra_set_effect(struct vibra_info *info) | |
| { | |
| struct twl6040 *twl6040 = info->twl6040; | |
| u8 vibdatl, vibdatr; | |
| int volt; | |
| /* weak motor */ | |
| volt = regulator_get_voltage(info->supplies[0].consumer) / 1000; | |
| vibdatl = twl6040_vibra_code(volt, info->vibldrv_res, | |
| info->viblmotor_res, | |
| info->weak_speed, info->direction); | |
| /* strong motor */ | |
| volt = regulator_get_voltage(info->supplies[1].consumer) / 1000; | |
| vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res, | |
| info->vibrmotor_res, | |
| info->strong_speed, info->direction); | |
| twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl); | |
| twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr); | |
| } | |
| static void vibra_play_work(struct work_struct *work) | |
| { | |
| struct vibra_info *info = container_of(work, | |
| struct vibra_info, play_work); | |
| int ret; | |
| /* Do not allow effect, while the routing is set to use audio */ | |
| ret = twl6040_get_vibralr_status(info->twl6040); | |
| if (ret & TWL6040_VIBSEL) { | |
| dev_info(info->dev, "Vibra is configured for audio\n"); | |
| return; | |
| } | |
| if (info->weak_speed || info->strong_speed) { | |
| if (!info->enabled) | |
| twl6040_vibra_enable(info); | |
| twl6040_vibra_set_effect(info); | |
| } else if (info->enabled) | |
| twl6040_vibra_disable(info); | |
| } | |
| static int vibra_play(struct input_dev *input, void *data, | |
| struct ff_effect *effect) | |
| { | |
| struct vibra_info *info = input_get_drvdata(input); | |
| info->weak_speed = effect->u.rumble.weak_magnitude; | |
| info->strong_speed = effect->u.rumble.strong_magnitude; | |
| info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1; | |
| schedule_work(&info->play_work); | |
| return 0; | |
| } | |
| static void twl6040_vibra_close(struct input_dev *input) | |
| { | |
| struct vibra_info *info = input_get_drvdata(input); | |
| cancel_work_sync(&info->play_work); | |
| if (info->enabled) | |
| twl6040_vibra_disable(info); | |
| } | |
| static int __maybe_unused twl6040_vibra_suspend(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct vibra_info *info = platform_get_drvdata(pdev); | |
| cancel_work_sync(&info->play_work); | |
| if (info->enabled) | |
| twl6040_vibra_disable(info); | |
| return 0; | |
| } | |
| static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL); | |
| static int twl6040_vibra_probe(struct platform_device *pdev) | |
| { | |
| struct device *twl6040_core_dev = pdev->dev.parent; | |
| struct device_node *twl6040_core_node; | |
| struct vibra_info *info; | |
| int vddvibl_uV = 0; | |
| int vddvibr_uV = 0; | |
| int error; | |
| of_node_get(twl6040_core_dev->of_node); | |
| twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node, | |
| "vibra"); | |
| if (!twl6040_core_node) { | |
| dev_err(&pdev->dev, "parent of node is missing?\n"); | |
| return -EINVAL; | |
| } | |
| info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); | |
| if (!info) { | |
| of_node_put(twl6040_core_node); | |
| dev_err(&pdev->dev, "couldn't allocate memory\n"); | |
| return -ENOMEM; | |
| } | |
| info->dev = &pdev->dev; | |
| info->twl6040 = dev_get_drvdata(pdev->dev.parent); | |
| of_property_read_u32(twl6040_core_node, "ti,vibldrv-res", | |
| &info->vibldrv_res); | |
| of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res", | |
| &info->vibrdrv_res); | |
| of_property_read_u32(twl6040_core_node, "ti,viblmotor-res", | |
| &info->viblmotor_res); | |
| of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res", | |
| &info->vibrmotor_res); | |
| of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV); | |
| of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV); | |
| of_node_put(twl6040_core_node); | |
| if ((!info->vibldrv_res && !info->viblmotor_res) || | |
| (!info->vibrdrv_res && !info->vibrmotor_res)) { | |
| dev_err(info->dev, "invalid vibra driver/motor resistance\n"); | |
| return -EINVAL; | |
| } | |
| info->irq = platform_get_irq(pdev, 0); | |
| if (info->irq < 0) { | |
| dev_err(info->dev, "invalid irq\n"); | |
| return -EINVAL; | |
| } | |
| error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL, | |
| twl6040_vib_irq_handler, | |
| IRQF_ONESHOT, | |
| "twl6040_irq_vib", info); | |
| if (error) { | |
| dev_err(info->dev, "VIB IRQ request failed: %d\n", error); | |
| return error; | |
| } | |
| info->supplies[0].supply = "vddvibl"; | |
| info->supplies[1].supply = "vddvibr"; | |
| /* | |
| * When booted with Device tree the regulators are attached to the | |
| * parent device (twl6040 MFD core) | |
| */ | |
| error = devm_regulator_bulk_get(twl6040_core_dev, | |
| ARRAY_SIZE(info->supplies), | |
| info->supplies); | |
| if (error) { | |
| dev_err(info->dev, "couldn't get regulators %d\n", error); | |
| return error; | |
| } | |
| if (vddvibl_uV) { | |
| error = regulator_set_voltage(info->supplies[0].consumer, | |
| vddvibl_uV, vddvibl_uV); | |
| if (error) { | |
| dev_err(info->dev, "failed to set VDDVIBL volt %d\n", | |
| error); | |
| return error; | |
| } | |
| } | |
| if (vddvibr_uV) { | |
| error = regulator_set_voltage(info->supplies[1].consumer, | |
| vddvibr_uV, vddvibr_uV); | |
| if (error) { | |
| dev_err(info->dev, "failed to set VDDVIBR volt %d\n", | |
| error); | |
| return error; | |
| } | |
| } | |
| INIT_WORK(&info->play_work, vibra_play_work); | |
| info->input_dev = devm_input_allocate_device(&pdev->dev); | |
| if (!info->input_dev) { | |
| dev_err(info->dev, "couldn't allocate input device\n"); | |
| return -ENOMEM; | |
| } | |
| input_set_drvdata(info->input_dev, info); | |
| info->input_dev->name = "twl6040:vibrator"; | |
| info->input_dev->id.version = 1; | |
| info->input_dev->close = twl6040_vibra_close; | |
| __set_bit(FF_RUMBLE, info->input_dev->ffbit); | |
| error = input_ff_create_memless(info->input_dev, NULL, vibra_play); | |
| if (error) { | |
| dev_err(info->dev, "couldn't register vibrator to FF\n"); | |
| return error; | |
| } | |
| error = input_register_device(info->input_dev); | |
| if (error) { | |
| dev_err(info->dev, "couldn't register input device\n"); | |
| return error; | |
| } | |
| platform_set_drvdata(pdev, info); | |
| return 0; | |
| } | |
| static struct platform_driver twl6040_vibra_driver = { | |
| .probe = twl6040_vibra_probe, | |
| .driver = { | |
| .name = "twl6040-vibra", | |
| .pm = &twl6040_vibra_pm_ops, | |
| }, | |
| }; | |
| module_platform_driver(twl6040_vibra_driver); | |
| MODULE_ALIAS("platform:twl6040-vibra"); | |
| MODULE_DESCRIPTION("TWL6040 Vibra driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>"); | |
| MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>"); |