| /* | |
| * dvb_ca.c: generic DVB functions for EN50221 CAM interfaces | |
| * | |
| * Copyright (C) 2004 Andrew de Quincey | |
| * | |
| * Parts of this file were based on sources as follows: | |
| * | |
| * Copyright (C) 2003 Ralph Metzler <rjkm@metzlerbros.de> | |
| * | |
| * based on code: | |
| * | |
| * Copyright (C) 1999-2002 Ralph Metzler | |
| * & Marcus Metzler for convergence integrated media GmbH | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version 2 | |
| * of the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * To obtain the license, point your browser to | |
| * http://www.gnu.org/copyleft/gpl.html | |
| */ | |
| #define pr_fmt(fmt) "dvb_ca_en50221: " fmt | |
| #include <linux/errno.h> | |
| #include <linux/slab.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/delay.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/kthread.h> | |
| #include "dvb_ca_en50221.h" | |
| #include "dvb_ringbuffer.h" | |
| static int dvb_ca_en50221_debug; | |
| module_param_named(cam_debug, dvb_ca_en50221_debug, int, 0644); | |
| MODULE_PARM_DESC(cam_debug, "enable verbose debug messages"); | |
| #define dprintk(fmt, arg...) do { \ | |
| if (dvb_ca_en50221_debug) \ | |
| printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg);\ | |
| } while (0) | |
| #define INIT_TIMEOUT_SECS 10 | |
| #define HOST_LINK_BUF_SIZE 0x200 | |
| #define RX_BUFFER_SIZE 65535 | |
| #define MAX_RX_PACKETS_PER_ITERATION 10 | |
| #define CTRLIF_DATA 0 | |
| #define CTRLIF_COMMAND 1 | |
| #define CTRLIF_STATUS 1 | |
| #define CTRLIF_SIZE_LOW 2 | |
| #define CTRLIF_SIZE_HIGH 3 | |
| #define CMDREG_HC 1 /* Host control */ | |
| #define CMDREG_SW 2 /* Size write */ | |
| #define CMDREG_SR 4 /* Size read */ | |
| #define CMDREG_RS 8 /* Reset interface */ | |
| #define CMDREG_FRIE 0x40 /* Enable FR interrupt */ | |
| #define CMDREG_DAIE 0x80 /* Enable DA interrupt */ | |
| #define IRQEN (CMDREG_DAIE) | |
| #define STATUSREG_RE 1 /* read error */ | |
| #define STATUSREG_WE 2 /* write error */ | |
| #define STATUSREG_FR 0x40 /* module free */ | |
| #define STATUSREG_DA 0x80 /* data available */ | |
| #define DVB_CA_SLOTSTATE_NONE 0 | |
| #define DVB_CA_SLOTSTATE_UNINITIALISED 1 | |
| #define DVB_CA_SLOTSTATE_RUNNING 2 | |
| #define DVB_CA_SLOTSTATE_INVALID 3 | |
| #define DVB_CA_SLOTSTATE_WAITREADY 4 | |
| #define DVB_CA_SLOTSTATE_VALIDATE 5 | |
| #define DVB_CA_SLOTSTATE_WAITFR 6 | |
| #define DVB_CA_SLOTSTATE_LINKINIT 7 | |
| /* Information on a CA slot */ | |
| struct dvb_ca_slot { | |
| /* current state of the CAM */ | |
| int slot_state; | |
| /* mutex used for serializing access to one CI slot */ | |
| struct mutex slot_lock; | |
| /* Number of CAMCHANGES that have occurred since last processing */ | |
| atomic_t camchange_count; | |
| /* Type of last CAMCHANGE */ | |
| int camchange_type; | |
| /* base address of CAM config */ | |
| u32 config_base; | |
| /* value to write into Config Control register */ | |
| u8 config_option; | |
| /* if 1, the CAM supports DA IRQs */ | |
| u8 da_irq_supported:1; | |
| /* size of the buffer to use when talking to the CAM */ | |
| int link_buf_size; | |
| /* buffer for incoming packets */ | |
| struct dvb_ringbuffer rx_buffer; | |
| /* timer used during various states of the slot */ | |
| unsigned long timeout; | |
| }; | |
| /* Private CA-interface information */ | |
| struct dvb_ca_private { | |
| struct kref refcount; | |
| /* pointer back to the public data structure */ | |
| struct dvb_ca_en50221 *pub; | |
| /* the DVB device */ | |
| struct dvb_device *dvbdev; | |
| /* Flags describing the interface (DVB_CA_FLAG_*) */ | |
| u32 flags; | |
| /* number of slots supported by this CA interface */ | |
| unsigned int slot_count; | |
| /* information on each slot */ | |
| struct dvb_ca_slot *slot_info; | |
| /* wait queues for read() and write() operations */ | |
| wait_queue_head_t wait_queue; | |
| /* PID of the monitoring thread */ | |
| struct task_struct *thread; | |
| /* Flag indicating if the CA device is open */ | |
| unsigned int open:1; | |
| /* Flag indicating the thread should wake up now */ | |
| unsigned int wakeup:1; | |
| /* Delay the main thread should use */ | |
| unsigned long delay; | |
| /* | |
| * Slot to start looking for data to read from in the next user-space | |
| * read operation | |
| */ | |
| int next_read_slot; | |
| /* mutex serializing ioctls */ | |
| struct mutex ioctl_mutex; | |
| }; | |
| static void dvb_ca_private_free(struct dvb_ca_private *ca) | |
| { | |
| unsigned int i; | |
| dvb_free_device(ca->dvbdev); | |
| for (i = 0; i < ca->slot_count; i++) | |
| vfree(ca->slot_info[i].rx_buffer.data); | |
| kfree(ca->slot_info); | |
| kfree(ca); | |
| } | |
| static void dvb_ca_private_release(struct kref *ref) | |
| { | |
| struct dvb_ca_private *ca; | |
| ca = container_of(ref, struct dvb_ca_private, refcount); | |
| dvb_ca_private_free(ca); | |
| } | |
| static void dvb_ca_private_get(struct dvb_ca_private *ca) | |
| { | |
| kref_get(&ca->refcount); | |
| } | |
| static void dvb_ca_private_put(struct dvb_ca_private *ca) | |
| { | |
| kref_put(&ca->refcount, dvb_ca_private_release); | |
| } | |
| static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca); | |
| static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, | |
| u8 *ebuf, int ecount); | |
| static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, | |
| u8 *ebuf, int ecount); | |
| /** | |
| * Safely find needle in haystack. | |
| * | |
| * @haystack: Buffer to look in. | |
| * @hlen: Number of bytes in haystack. | |
| * @needle: Buffer to find. | |
| * @nlen: Number of bytes in needle. | |
| * @return Pointer into haystack needle was found at, or NULL if not found. | |
| */ | |
| static char *findstr(char *haystack, int hlen, char *needle, int nlen) | |
| { | |
| int i; | |
| if (hlen < nlen) | |
| return NULL; | |
| for (i = 0; i <= hlen - nlen; i++) { | |
| if (!strncmp(haystack + i, needle, nlen)) | |
| return haystack + i; | |
| } | |
| return NULL; | |
| } | |
| /* ************************************************************************** */ | |
| /* EN50221 physical interface functions */ | |
| /** | |
| * dvb_ca_en50221_check_camstatus - Check CAM status. | |
| */ | |
| static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot) | |
| { | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| int slot_status; | |
| int cam_present_now; | |
| int cam_changed; | |
| /* IRQ mode */ | |
| if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) | |
| return (atomic_read(&sl->camchange_count) != 0); | |
| /* poll mode */ | |
| slot_status = ca->pub->poll_slot_status(ca->pub, slot, ca->open); | |
| cam_present_now = (slot_status & DVB_CA_EN50221_POLL_CAM_PRESENT) ? 1 : 0; | |
| cam_changed = (slot_status & DVB_CA_EN50221_POLL_CAM_CHANGED) ? 1 : 0; | |
| if (!cam_changed) { | |
| int cam_present_old = (sl->slot_state != DVB_CA_SLOTSTATE_NONE); | |
| cam_changed = (cam_present_now != cam_present_old); | |
| } | |
| if (cam_changed) { | |
| if (!cam_present_now) | |
| sl->camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; | |
| else | |
| sl->camchange_type = DVB_CA_EN50221_CAMCHANGE_INSERTED; | |
| atomic_set(&sl->camchange_count, 1); | |
| } else { | |
| if ((sl->slot_state == DVB_CA_SLOTSTATE_WAITREADY) && | |
| (slot_status & DVB_CA_EN50221_POLL_CAM_READY)) { | |
| /* move to validate state if reset is completed */ | |
| sl->slot_state = DVB_CA_SLOTSTATE_VALIDATE; | |
| } | |
| } | |
| return cam_changed; | |
| } | |
| /** | |
| * dvb_ca_en50221_wait_if_status - Wait for flags to become set on the STATUS | |
| * register on a CAM interface, checking for errors and timeout. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot on interface. | |
| * @waitfor: Flags to wait for. | |
| * @timeout_ms: Timeout in milliseconds. | |
| * | |
| * @return 0 on success, nonzero on error. | |
| */ | |
| static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot, | |
| u8 waitfor, int timeout_hz) | |
| { | |
| unsigned long timeout; | |
| unsigned long start; | |
| dprintk("%s\n", __func__); | |
| /* loop until timeout elapsed */ | |
| start = jiffies; | |
| timeout = jiffies + timeout_hz; | |
| while (1) { | |
| int res; | |
| /* read the status and check for error */ | |
| res = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); | |
| if (res < 0) | |
| return -EIO; | |
| /* if we got the flags, it was successful! */ | |
| if (res & waitfor) { | |
| dprintk("%s succeeded timeout:%lu\n", | |
| __func__, jiffies - start); | |
| return 0; | |
| } | |
| /* check for timeout */ | |
| if (time_after(jiffies, timeout)) | |
| break; | |
| /* wait for a bit */ | |
| usleep_range(1000, 1100); | |
| } | |
| dprintk("%s failed timeout:%lu\n", __func__, jiffies - start); | |
| /* if we get here, we've timed out */ | |
| return -ETIMEDOUT; | |
| } | |
| /** | |
| * dvb_ca_en50221_link_init - Initialise the link layer connection to a CAM. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot id. | |
| * | |
| * @return 0 on success, nonzero on failure. | |
| */ | |
| static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot) | |
| { | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| int ret; | |
| int buf_size; | |
| u8 buf[2]; | |
| dprintk("%s\n", __func__); | |
| /* we'll be determining these during this function */ | |
| sl->da_irq_supported = 0; | |
| /* | |
| * set the host link buffer size temporarily. it will be overwritten | |
| * with the real negotiated size later. | |
| */ | |
| sl->link_buf_size = 2; | |
| /* read the buffer size from the CAM */ | |
| ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, | |
| IRQEN | CMDREG_SR); | |
| if (ret) | |
| return ret; | |
| ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ); | |
| if (ret) | |
| return ret; | |
| ret = dvb_ca_en50221_read_data(ca, slot, buf, 2); | |
| if (ret != 2) | |
| return -EIO; | |
| ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN); | |
| if (ret) | |
| return ret; | |
| /* | |
| * store it, and choose the minimum of our buffer and the CAM's buffer | |
| * size | |
| */ | |
| buf_size = (buf[0] << 8) | buf[1]; | |
| if (buf_size > HOST_LINK_BUF_SIZE) | |
| buf_size = HOST_LINK_BUF_SIZE; | |
| sl->link_buf_size = buf_size; | |
| buf[0] = buf_size >> 8; | |
| buf[1] = buf_size & 0xff; | |
| dprintk("Chosen link buffer size of %i\n", buf_size); | |
| /* write the buffer size to the CAM */ | |
| ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, | |
| IRQEN | CMDREG_SW); | |
| if (ret) | |
| return ret; | |
| ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10); | |
| if (ret) | |
| return ret; | |
| ret = dvb_ca_en50221_write_data(ca, slot, buf, 2); | |
| if (ret != 2) | |
| return -EIO; | |
| ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN); | |
| if (ret) | |
| return ret; | |
| /* success */ | |
| return 0; | |
| } | |
| /** | |
| * dvb_ca_en50221_read_tuple - Read a tuple from attribute memory. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot id. | |
| * @address: Address to read from. Updated. | |
| * @tupleType: Tuple id byte. Updated. | |
| * @tupleLength: Tuple length. Updated. | |
| * @tuple: Dest buffer for tuple (must be 256 bytes). Updated. | |
| * | |
| * @return 0 on success, nonzero on error. | |
| */ | |
| static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot, | |
| int *address, int *tuple_type, | |
| int *tuple_length, u8 *tuple) | |
| { | |
| int i; | |
| int _tuple_type; | |
| int _tuple_length; | |
| int _address = *address; | |
| /* grab the next tuple length and type */ | |
| _tuple_type = ca->pub->read_attribute_mem(ca->pub, slot, _address); | |
| if (_tuple_type < 0) | |
| return _tuple_type; | |
| if (_tuple_type == 0xff) { | |
| dprintk("END OF CHAIN TUPLE type:0x%x\n", _tuple_type); | |
| *address += 2; | |
| *tuple_type = _tuple_type; | |
| *tuple_length = 0; | |
| return 0; | |
| } | |
| _tuple_length = ca->pub->read_attribute_mem(ca->pub, slot, | |
| _address + 2); | |
| if (_tuple_length < 0) | |
| return _tuple_length; | |
| _address += 4; | |
| dprintk("TUPLE type:0x%x length:%i\n", _tuple_type, _tuple_length); | |
| /* read in the whole tuple */ | |
| for (i = 0; i < _tuple_length; i++) { | |
| tuple[i] = ca->pub->read_attribute_mem(ca->pub, slot, | |
| _address + (i * 2)); | |
| dprintk(" 0x%02x: 0x%02x %c\n", | |
| i, tuple[i] & 0xff, | |
| ((tuple[i] > 31) && (tuple[i] < 127)) ? tuple[i] : '.'); | |
| } | |
| _address += (_tuple_length * 2); | |
| /* success */ | |
| *tuple_type = _tuple_type; | |
| *tuple_length = _tuple_length; | |
| *address = _address; | |
| return 0; | |
| } | |
| /** | |
| * dvb_ca_en50221_parse_attributes - Parse attribute memory of a CAM module, | |
| * extracting Config register, and checking it is a DVB CAM module. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot id. | |
| * | |
| * @return 0 on success, <0 on failure. | |
| */ | |
| static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot) | |
| { | |
| struct dvb_ca_slot *sl; | |
| int address = 0; | |
| int tuple_length; | |
| int tuple_type; | |
| u8 tuple[257]; | |
| char *dvb_str; | |
| int rasz; | |
| int status; | |
| int got_cftableentry = 0; | |
| int end_chain = 0; | |
| int i; | |
| u16 manfid = 0; | |
| u16 devid = 0; | |
| /* CISTPL_DEVICE_0A */ | |
| status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type, | |
| &tuple_length, tuple); | |
| if (status < 0) | |
| return status; | |
| if (tuple_type != 0x1D) | |
| return -EINVAL; | |
| /* CISTPL_DEVICE_0C */ | |
| status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type, | |
| &tuple_length, tuple); | |
| if (status < 0) | |
| return status; | |
| if (tuple_type != 0x1C) | |
| return -EINVAL; | |
| /* CISTPL_VERS_1 */ | |
| status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type, | |
| &tuple_length, tuple); | |
| if (status < 0) | |
| return status; | |
| if (tuple_type != 0x15) | |
| return -EINVAL; | |
| /* CISTPL_MANFID */ | |
| status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type, | |
| &tuple_length, tuple); | |
| if (status < 0) | |
| return status; | |
| if (tuple_type != 0x20) | |
| return -EINVAL; | |
| if (tuple_length != 4) | |
| return -EINVAL; | |
| manfid = (tuple[1] << 8) | tuple[0]; | |
| devid = (tuple[3] << 8) | tuple[2]; | |
| /* CISTPL_CONFIG */ | |
| status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type, | |
| &tuple_length, tuple); | |
| if (status < 0) | |
| return status; | |
| if (tuple_type != 0x1A) | |
| return -EINVAL; | |
| if (tuple_length < 3) | |
| return -EINVAL; | |
| /* extract the configbase */ | |
| rasz = tuple[0] & 3; | |
| if (tuple_length < (3 + rasz + 14)) | |
| return -EINVAL; | |
| sl = &ca->slot_info[slot]; | |
| sl->config_base = 0; | |
| for (i = 0; i < rasz + 1; i++) | |
| sl->config_base |= (tuple[2 + i] << (8 * i)); | |
| /* check it contains the correct DVB string */ | |
| dvb_str = findstr((char *)tuple, tuple_length, "DVB_CI_V", 8); | |
| if (!dvb_str) | |
| return -EINVAL; | |
| if (tuple_length < ((dvb_str - (char *)tuple) + 12)) | |
| return -EINVAL; | |
| /* is it a version we support? */ | |
| if (strncmp(dvb_str + 8, "1.00", 4)) { | |
| pr_err("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n", | |
| ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9], | |
| dvb_str[10], dvb_str[11]); | |
| return -EINVAL; | |
| } | |
| /* process the CFTABLE_ENTRY tuples, and any after those */ | |
| while ((!end_chain) && (address < 0x1000)) { | |
| status = dvb_ca_en50221_read_tuple(ca, slot, &address, | |
| &tuple_type, &tuple_length, | |
| tuple); | |
| if (status < 0) | |
| return status; | |
| switch (tuple_type) { | |
| case 0x1B: /* CISTPL_CFTABLE_ENTRY */ | |
| if (tuple_length < (2 + 11 + 17)) | |
| break; | |
| /* if we've already parsed one, just use it */ | |
| if (got_cftableentry) | |
| break; | |
| /* get the config option */ | |
| sl->config_option = tuple[0] & 0x3f; | |
| /* OK, check it contains the correct strings */ | |
| if (!findstr((char *)tuple, tuple_length, | |
| "DVB_HOST", 8) || | |
| !findstr((char *)tuple, tuple_length, | |
| "DVB_CI_MODULE", 13)) | |
| break; | |
| got_cftableentry = 1; | |
| break; | |
| case 0x14: /* CISTPL_NO_LINK */ | |
| break; | |
| case 0xFF: /* CISTPL_END */ | |
| end_chain = 1; | |
| break; | |
| default: /* Unknown tuple type - just skip this tuple */ | |
| dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n", | |
| tuple_type, tuple_length); | |
| break; | |
| } | |
| } | |
| if ((address > 0x1000) || (!got_cftableentry)) | |
| return -EINVAL; | |
| dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n", | |
| manfid, devid, sl->config_base, sl->config_option); | |
| /* success! */ | |
| return 0; | |
| } | |
| /** | |
| * dvb_ca_en50221_set_configoption - Set CAM's configoption correctly. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot containing the CAM. | |
| */ | |
| static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot) | |
| { | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| int configoption; | |
| dprintk("%s\n", __func__); | |
| /* set the config option */ | |
| ca->pub->write_attribute_mem(ca->pub, slot, sl->config_base, | |
| sl->config_option); | |
| /* check it */ | |
| configoption = ca->pub->read_attribute_mem(ca->pub, slot, | |
| sl->config_base); | |
| dprintk("Set configoption 0x%x, read configoption 0x%x\n", | |
| sl->config_option, configoption & 0x3f); | |
| /* fine! */ | |
| return 0; | |
| } | |
| /** | |
| * dvb_ca_en50221_read_data - This function talks to an EN50221 CAM control | |
| * interface. It reads a buffer of data from the CAM. The data can either | |
| * be stored in a supplied buffer, or automatically be added to the slot's | |
| * rx_buffer. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot to read from. | |
| * @ebuf: If non-NULL, the data will be written to this buffer. If NULL, | |
| * the data will be added into the buffering system as a normal fragment. | |
| * @ecount: Size of ebuf. Ignored if ebuf is NULL. | |
| * | |
| * @return Number of bytes read, or < 0 on error | |
| */ | |
| static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, | |
| u8 *ebuf, int ecount) | |
| { | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| int bytes_read; | |
| int status; | |
| u8 buf[HOST_LINK_BUF_SIZE]; | |
| int i; | |
| dprintk("%s\n", __func__); | |
| /* check if we have space for a link buf in the rx_buffer */ | |
| if (!ebuf) { | |
| int buf_free; | |
| if (!sl->rx_buffer.data) { | |
| status = -EIO; | |
| goto exit; | |
| } | |
| buf_free = dvb_ringbuffer_free(&sl->rx_buffer); | |
| if (buf_free < (sl->link_buf_size + | |
| DVB_RINGBUFFER_PKTHDRSIZE)) { | |
| status = -EAGAIN; | |
| goto exit; | |
| } | |
| } | |
| if (ca->pub->read_data && | |
| (sl->slot_state != DVB_CA_SLOTSTATE_LINKINIT)) { | |
| if (!ebuf) | |
| status = ca->pub->read_data(ca->pub, slot, buf, | |
| sizeof(buf)); | |
| else | |
| status = ca->pub->read_data(ca->pub, slot, buf, ecount); | |
| if (status < 0) | |
| return status; | |
| bytes_read = status; | |
| if (status == 0) | |
| goto exit; | |
| } else { | |
| /* check if there is data available */ | |
| status = ca->pub->read_cam_control(ca->pub, slot, | |
| CTRLIF_STATUS); | |
| if (status < 0) | |
| goto exit; | |
| if (!(status & STATUSREG_DA)) { | |
| /* no data */ | |
| status = 0; | |
| goto exit; | |
| } | |
| /* read the amount of data */ | |
| status = ca->pub->read_cam_control(ca->pub, slot, | |
| CTRLIF_SIZE_HIGH); | |
| if (status < 0) | |
| goto exit; | |
| bytes_read = status << 8; | |
| status = ca->pub->read_cam_control(ca->pub, slot, | |
| CTRLIF_SIZE_LOW); | |
| if (status < 0) | |
| goto exit; | |
| bytes_read |= status; | |
| /* check it will fit */ | |
| if (!ebuf) { | |
| if (bytes_read > sl->link_buf_size) { | |
| pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n", | |
| ca->dvbdev->adapter->num, bytes_read, | |
| sl->link_buf_size); | |
| sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT; | |
| status = -EIO; | |
| goto exit; | |
| } | |
| if (bytes_read < 2) { | |
| pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n", | |
| ca->dvbdev->adapter->num); | |
| sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT; | |
| status = -EIO; | |
| goto exit; | |
| } | |
| } else { | |
| if (bytes_read > ecount) { | |
| pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n", | |
| ca->dvbdev->adapter->num); | |
| status = -EIO; | |
| goto exit; | |
| } | |
| } | |
| /* fill the buffer */ | |
| for (i = 0; i < bytes_read; i++) { | |
| /* read byte and check */ | |
| status = ca->pub->read_cam_control(ca->pub, slot, | |
| CTRLIF_DATA); | |
| if (status < 0) | |
| goto exit; | |
| /* OK, store it in the buffer */ | |
| buf[i] = status; | |
| } | |
| /* check for read error (RE should now be 0) */ | |
| status = ca->pub->read_cam_control(ca->pub, slot, | |
| CTRLIF_STATUS); | |
| if (status < 0) | |
| goto exit; | |
| if (status & STATUSREG_RE) { | |
| sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT; | |
| status = -EIO; | |
| goto exit; | |
| } | |
| } | |
| /* | |
| * OK, add it to the receive buffer, or copy into external buffer if | |
| * supplied | |
| */ | |
| if (!ebuf) { | |
| if (!sl->rx_buffer.data) { | |
| status = -EIO; | |
| goto exit; | |
| } | |
| dvb_ringbuffer_pkt_write(&sl->rx_buffer, buf, bytes_read); | |
| } else { | |
| memcpy(ebuf, buf, bytes_read); | |
| } | |
| dprintk("Received CA packet for slot %i connection id 0x%x last_frag:%i size:0x%x\n", slot, | |
| buf[0], (buf[1] & 0x80) == 0, bytes_read); | |
| /* wake up readers when a last_fragment is received */ | |
| if ((buf[1] & 0x80) == 0x00) | |
| wake_up_interruptible(&ca->wait_queue); | |
| status = bytes_read; | |
| exit: | |
| return status; | |
| } | |
| /** | |
| * dvb_ca_en50221_write_data - This function talks to an EN50221 CAM control | |
| * interface. It writes a buffer of data to a CAM. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot to write to. | |
| * @ebuf: The data in this buffer is treated as a complete link-level packet to | |
| * be written. | |
| * @count: Size of ebuf. | |
| * | |
| * @return Number of bytes written, or < 0 on error. | |
| */ | |
| static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, | |
| u8 *buf, int bytes_write) | |
| { | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| int status; | |
| int i; | |
| dprintk("%s\n", __func__); | |
| /* sanity check */ | |
| if (bytes_write > sl->link_buf_size) | |
| return -EINVAL; | |
| if (ca->pub->write_data && | |
| (sl->slot_state != DVB_CA_SLOTSTATE_LINKINIT)) | |
| return ca->pub->write_data(ca->pub, slot, buf, bytes_write); | |
| /* | |
| * it is possible we are dealing with a single buffer implementation, | |
| * thus if there is data available for read or if there is even a read | |
| * already in progress, we do nothing but awake the kernel thread to | |
| * process the data if necessary. | |
| */ | |
| status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); | |
| if (status < 0) | |
| goto exitnowrite; | |
| if (status & (STATUSREG_DA | STATUSREG_RE)) { | |
| if (status & STATUSREG_DA) | |
| dvb_ca_en50221_thread_wakeup(ca); | |
| status = -EAGAIN; | |
| goto exitnowrite; | |
| } | |
| /* OK, set HC bit */ | |
| status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, | |
| IRQEN | CMDREG_HC); | |
| if (status) | |
| goto exit; | |
| /* check if interface is still free */ | |
| status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); | |
| if (status < 0) | |
| goto exit; | |
| if (!(status & STATUSREG_FR)) { | |
| /* it wasn't free => try again later */ | |
| status = -EAGAIN; | |
| goto exit; | |
| } | |
| /* | |
| * It may need some time for the CAM to settle down, or there might | |
| * be a race condition between the CAM, writing HC and our last | |
| * check for DA. This happens, if the CAM asserts DA, just after | |
| * checking DA before we are setting HC. In this case it might be | |
| * a bug in the CAM to keep the FR bit, the lower layer/HW | |
| * communication requires a longer timeout or the CAM needs more | |
| * time internally. But this happens in reality! | |
| * We need to read the status from the HW again and do the same | |
| * we did for the previous check for DA | |
| */ | |
| status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); | |
| if (status < 0) | |
| goto exit; | |
| if (status & (STATUSREG_DA | STATUSREG_RE)) { | |
| if (status & STATUSREG_DA) | |
| dvb_ca_en50221_thread_wakeup(ca); | |
| status = -EAGAIN; | |
| goto exit; | |
| } | |
| /* send the amount of data */ | |
| status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, | |
| bytes_write >> 8); | |
| if (status) | |
| goto exit; | |
| status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW, | |
| bytes_write & 0xff); | |
| if (status) | |
| goto exit; | |
| /* send the buffer */ | |
| for (i = 0; i < bytes_write; i++) { | |
| status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_DATA, | |
| buf[i]); | |
| if (status) | |
| goto exit; | |
| } | |
| /* check for write error (WE should now be 0) */ | |
| status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); | |
| if (status < 0) | |
| goto exit; | |
| if (status & STATUSREG_WE) { | |
| sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT; | |
| status = -EIO; | |
| goto exit; | |
| } | |
| status = bytes_write; | |
| dprintk("Wrote CA packet for slot %i, connection id 0x%x last_frag:%i size:0x%x\n", slot, | |
| buf[0], (buf[1] & 0x80) == 0, bytes_write); | |
| exit: | |
| ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN); | |
| exitnowrite: | |
| return status; | |
| } | |
| /* ************************************************************************** */ | |
| /* EN50221 higher level functions */ | |
| /** | |
| * dvb_ca_en50221_slot_shutdown - A CAM has been removed => shut it down. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot to shut down. | |
| */ | |
| static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot) | |
| { | |
| dprintk("%s\n", __func__); | |
| ca->pub->slot_shutdown(ca->pub, slot); | |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; | |
| /* | |
| * need to wake up all processes to check if they're now trying to | |
| * write to a defunct CAM | |
| */ | |
| wake_up_interruptible(&ca->wait_queue); | |
| dprintk("Slot %i shutdown\n", slot); | |
| /* success */ | |
| return 0; | |
| } | |
| /** | |
| * dvb_ca_en50221_camchange_irq - A CAMCHANGE IRQ has occurred. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot concerned. | |
| * @change_type: One of the DVB_CA_CAMCHANGE_* values. | |
| */ | |
| void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, | |
| int change_type) | |
| { | |
| struct dvb_ca_private *ca = pubca->private; | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type); | |
| switch (change_type) { | |
| case DVB_CA_EN50221_CAMCHANGE_REMOVED: | |
| case DVB_CA_EN50221_CAMCHANGE_INSERTED: | |
| break; | |
| default: | |
| return; | |
| } | |
| sl->camchange_type = change_type; | |
| atomic_inc(&sl->camchange_count); | |
| dvb_ca_en50221_thread_wakeup(ca); | |
| } | |
| EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq); | |
| /** | |
| * dvb_ca_en50221_camready_irq - A CAMREADY IRQ has occurred. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot concerned. | |
| */ | |
| void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot) | |
| { | |
| struct dvb_ca_private *ca = pubca->private; | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| dprintk("CAMREADY IRQ slot:%i\n", slot); | |
| if (sl->slot_state == DVB_CA_SLOTSTATE_WAITREADY) { | |
| sl->slot_state = DVB_CA_SLOTSTATE_VALIDATE; | |
| dvb_ca_en50221_thread_wakeup(ca); | |
| } | |
| } | |
| EXPORT_SYMBOL(dvb_ca_en50221_camready_irq); | |
| /** | |
| * dvb_ca_en50221_frda_irq - An FR or DA IRQ has occurred. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot concerned. | |
| */ | |
| void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot) | |
| { | |
| struct dvb_ca_private *ca = pubca->private; | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| int flags; | |
| dprintk("FR/DA IRQ slot:%i\n", slot); | |
| switch (sl->slot_state) { | |
| case DVB_CA_SLOTSTATE_LINKINIT: | |
| flags = ca->pub->read_cam_control(pubca, slot, CTRLIF_STATUS); | |
| if (flags & STATUSREG_DA) { | |
| dprintk("CAM supports DA IRQ\n"); | |
| sl->da_irq_supported = 1; | |
| } | |
| break; | |
| case DVB_CA_SLOTSTATE_RUNNING: | |
| if (ca->open) | |
| dvb_ca_en50221_thread_wakeup(ca); | |
| break; | |
| } | |
| } | |
| EXPORT_SYMBOL(dvb_ca_en50221_frda_irq); | |
| /* ************************************************************************** */ | |
| /* EN50221 thread functions */ | |
| /** | |
| * Wake up the DVB CA thread | |
| * | |
| * @ca: CA instance. | |
| */ | |
| static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca) | |
| { | |
| dprintk("%s\n", __func__); | |
| ca->wakeup = 1; | |
| mb(); | |
| wake_up_process(ca->thread); | |
| } | |
| /** | |
| * Update the delay used by the thread. | |
| * | |
| * @ca: CA instance. | |
| */ | |
| static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca) | |
| { | |
| int delay; | |
| int curdelay = 100000000; | |
| int slot; | |
| /* | |
| * Beware of too high polling frequency, because one polling | |
| * call might take several hundred milliseconds until timeout! | |
| */ | |
| for (slot = 0; slot < ca->slot_count; slot++) { | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| switch (sl->slot_state) { | |
| default: | |
| case DVB_CA_SLOTSTATE_NONE: | |
| delay = HZ * 60; /* 60s */ | |
| if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) | |
| delay = HZ * 5; /* 5s */ | |
| break; | |
| case DVB_CA_SLOTSTATE_INVALID: | |
| delay = HZ * 60; /* 60s */ | |
| if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) | |
| delay = HZ / 10; /* 100ms */ | |
| break; | |
| case DVB_CA_SLOTSTATE_UNINITIALISED: | |
| case DVB_CA_SLOTSTATE_WAITREADY: | |
| case DVB_CA_SLOTSTATE_VALIDATE: | |
| case DVB_CA_SLOTSTATE_WAITFR: | |
| case DVB_CA_SLOTSTATE_LINKINIT: | |
| delay = HZ / 10; /* 100ms */ | |
| break; | |
| case DVB_CA_SLOTSTATE_RUNNING: | |
| delay = HZ * 60; /* 60s */ | |
| if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) | |
| delay = HZ / 10; /* 100ms */ | |
| if (ca->open) { | |
| if ((!sl->da_irq_supported) || | |
| (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA))) | |
| delay = HZ / 10; /* 100ms */ | |
| } | |
| break; | |
| } | |
| if (delay < curdelay) | |
| curdelay = delay; | |
| } | |
| ca->delay = curdelay; | |
| } | |
| /** | |
| * Poll if the CAM is gone. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot to process. | |
| * @return: 0 .. no change | |
| * 1 .. CAM state changed | |
| */ | |
| static int dvb_ca_en50221_poll_cam_gone(struct dvb_ca_private *ca, int slot) | |
| { | |
| int changed = 0; | |
| int status; | |
| /* | |
| * we need this extra check for annoying interfaces like the | |
| * budget-av | |
| */ | |
| if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) && | |
| (ca->pub->poll_slot_status)) { | |
| status = ca->pub->poll_slot_status(ca->pub, slot, 0); | |
| if (!(status & | |
| DVB_CA_EN50221_POLL_CAM_PRESENT)) { | |
| ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| changed = 1; | |
| } | |
| } | |
| return changed; | |
| } | |
| /** | |
| * Thread state machine for one CA slot to perform the data transfer. | |
| * | |
| * @ca: CA instance. | |
| * @slot: Slot to process. | |
| */ | |
| static void dvb_ca_en50221_thread_state_machine(struct dvb_ca_private *ca, | |
| int slot) | |
| { | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| int flags; | |
| int pktcount; | |
| void *rxbuf; | |
| mutex_lock(&sl->slot_lock); | |
| /* check the cam status + deal with CAMCHANGEs */ | |
| while (dvb_ca_en50221_check_camstatus(ca, slot)) { | |
| /* clear down an old CI slot if necessary */ | |
| if (sl->slot_state != DVB_CA_SLOTSTATE_NONE) | |
| dvb_ca_en50221_slot_shutdown(ca, slot); | |
| /* if a CAM is NOW present, initialise it */ | |
| if (sl->camchange_type == DVB_CA_EN50221_CAMCHANGE_INSERTED) | |
| sl->slot_state = DVB_CA_SLOTSTATE_UNINITIALISED; | |
| /* we've handled one CAMCHANGE */ | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| atomic_dec(&sl->camchange_count); | |
| } | |
| /* CAM state machine */ | |
| switch (sl->slot_state) { | |
| case DVB_CA_SLOTSTATE_NONE: | |
| case DVB_CA_SLOTSTATE_INVALID: | |
| /* no action needed */ | |
| break; | |
| case DVB_CA_SLOTSTATE_UNINITIALISED: | |
| sl->slot_state = DVB_CA_SLOTSTATE_WAITREADY; | |
| ca->pub->slot_reset(ca->pub, slot); | |
| sl->timeout = jiffies + (INIT_TIMEOUT_SECS * HZ); | |
| break; | |
| case DVB_CA_SLOTSTATE_WAITREADY: | |
| if (time_after(jiffies, sl->timeout)) { | |
| pr_err("dvb_ca adaptor %d: PC card did not respond :(\n", | |
| ca->dvbdev->adapter->num); | |
| sl->slot_state = DVB_CA_SLOTSTATE_INVALID; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| break; | |
| } | |
| /* | |
| * no other action needed; will automatically change state when | |
| * ready | |
| */ | |
| break; | |
| case DVB_CA_SLOTSTATE_VALIDATE: | |
| if (dvb_ca_en50221_parse_attributes(ca, slot) != 0) { | |
| if (dvb_ca_en50221_poll_cam_gone(ca, slot)) | |
| break; | |
| pr_err("dvb_ca adapter %d: Invalid PC card inserted :(\n", | |
| ca->dvbdev->adapter->num); | |
| sl->slot_state = DVB_CA_SLOTSTATE_INVALID; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| break; | |
| } | |
| if (dvb_ca_en50221_set_configoption(ca, slot) != 0) { | |
| pr_err("dvb_ca adapter %d: Unable to initialise CAM :(\n", | |
| ca->dvbdev->adapter->num); | |
| sl->slot_state = DVB_CA_SLOTSTATE_INVALID; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| break; | |
| } | |
| if (ca->pub->write_cam_control(ca->pub, slot, | |
| CTRLIF_COMMAND, | |
| CMDREG_RS) != 0) { | |
| pr_err("dvb_ca adapter %d: Unable to reset CAM IF\n", | |
| ca->dvbdev->adapter->num); | |
| sl->slot_state = DVB_CA_SLOTSTATE_INVALID; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| break; | |
| } | |
| dprintk("DVB CAM validated successfully\n"); | |
| sl->timeout = jiffies + (INIT_TIMEOUT_SECS * HZ); | |
| sl->slot_state = DVB_CA_SLOTSTATE_WAITFR; | |
| ca->wakeup = 1; | |
| break; | |
| case DVB_CA_SLOTSTATE_WAITFR: | |
| if (time_after(jiffies, sl->timeout)) { | |
| pr_err("dvb_ca adapter %d: DVB CAM did not respond :(\n", | |
| ca->dvbdev->adapter->num); | |
| sl->slot_state = DVB_CA_SLOTSTATE_INVALID; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| break; | |
| } | |
| flags = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); | |
| if (flags & STATUSREG_FR) { | |
| sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT; | |
| ca->wakeup = 1; | |
| } | |
| break; | |
| case DVB_CA_SLOTSTATE_LINKINIT: | |
| if (dvb_ca_en50221_link_init(ca, slot) != 0) { | |
| if (dvb_ca_en50221_poll_cam_gone(ca, slot)) | |
| break; | |
| pr_err("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n", | |
| ca->dvbdev->adapter->num); | |
| sl->slot_state = DVB_CA_SLOTSTATE_UNINITIALISED; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| break; | |
| } | |
| if (!sl->rx_buffer.data) { | |
| rxbuf = vmalloc(RX_BUFFER_SIZE); | |
| if (!rxbuf) { | |
| pr_err("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", | |
| ca->dvbdev->adapter->num); | |
| sl->slot_state = DVB_CA_SLOTSTATE_INVALID; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| break; | |
| } | |
| dvb_ringbuffer_init(&sl->rx_buffer, rxbuf, | |
| RX_BUFFER_SIZE); | |
| } | |
| ca->pub->slot_ts_enable(ca->pub, slot); | |
| sl->slot_state = DVB_CA_SLOTSTATE_RUNNING; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| pr_err("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n", | |
| ca->dvbdev->adapter->num); | |
| break; | |
| case DVB_CA_SLOTSTATE_RUNNING: | |
| if (!ca->open) | |
| break; | |
| /* poll slots for data */ | |
| pktcount = 0; | |
| while (dvb_ca_en50221_read_data(ca, slot, NULL, 0) > 0) { | |
| if (!ca->open) | |
| break; | |
| /* | |
| * if a CAMCHANGE occurred at some point, do not do any | |
| * more processing of this slot | |
| */ | |
| if (dvb_ca_en50221_check_camstatus(ca, slot)) { | |
| /* | |
| * we don't want to sleep on the next iteration | |
| * so we can handle the cam change | |
| */ | |
| ca->wakeup = 1; | |
| break; | |
| } | |
| /* check if we've hit our limit this time */ | |
| if (++pktcount >= MAX_RX_PACKETS_PER_ITERATION) { | |
| /* | |
| * don't sleep; there is likely to be more data | |
| * to read | |
| */ | |
| ca->wakeup = 1; | |
| break; | |
| } | |
| } | |
| break; | |
| } | |
| mutex_unlock(&sl->slot_lock); | |
| } | |
| /** | |
| * Kernel thread which monitors CA slots for CAM changes, and performs data | |
| * transfers. | |
| */ | |
| static int dvb_ca_en50221_thread(void *data) | |
| { | |
| struct dvb_ca_private *ca = data; | |
| int slot; | |
| dprintk("%s\n", __func__); | |
| /* choose the correct initial delay */ | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| /* main loop */ | |
| while (!kthread_should_stop()) { | |
| /* sleep for a bit */ | |
| if (!ca->wakeup) { | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| schedule_timeout(ca->delay); | |
| if (kthread_should_stop()) | |
| return 0; | |
| } | |
| ca->wakeup = 0; | |
| /* go through all the slots processing them */ | |
| for (slot = 0; slot < ca->slot_count; slot++) | |
| dvb_ca_en50221_thread_state_machine(ca, slot); | |
| } | |
| return 0; | |
| } | |
| /* ************************************************************************** */ | |
| /* EN50221 IO interface functions */ | |
| /** | |
| * Real ioctl implementation. | |
| * NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them. | |
| * | |
| * @inode: Inode concerned. | |
| * @file: File concerned. | |
| * @cmd: IOCTL command. | |
| * @arg: Associated argument. | |
| * | |
| * @return 0 on success, <0 on error. | |
| */ | |
| static int dvb_ca_en50221_io_do_ioctl(struct file *file, | |
| unsigned int cmd, void *parg) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_ca_private *ca = dvbdev->priv; | |
| int err = 0; | |
| int slot; | |
| dprintk("%s\n", __func__); | |
| if (mutex_lock_interruptible(&ca->ioctl_mutex)) | |
| return -ERESTARTSYS; | |
| switch (cmd) { | |
| case CA_RESET: | |
| for (slot = 0; slot < ca->slot_count; slot++) { | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| mutex_lock(&sl->slot_lock); | |
| if (sl->slot_state != DVB_CA_SLOTSTATE_NONE) { | |
| dvb_ca_en50221_slot_shutdown(ca, slot); | |
| if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) | |
| dvb_ca_en50221_camchange_irq(ca->pub, | |
| slot, | |
| DVB_CA_EN50221_CAMCHANGE_INSERTED); | |
| } | |
| mutex_unlock(&sl->slot_lock); | |
| } | |
| ca->next_read_slot = 0; | |
| dvb_ca_en50221_thread_wakeup(ca); | |
| break; | |
| case CA_GET_CAP: { | |
| struct ca_caps *caps = parg; | |
| caps->slot_num = ca->slot_count; | |
| caps->slot_type = CA_CI_LINK; | |
| caps->descr_num = 0; | |
| caps->descr_type = 0; | |
| break; | |
| } | |
| case CA_GET_SLOT_INFO: { | |
| struct ca_slot_info *info = parg; | |
| struct dvb_ca_slot *sl; | |
| slot = info->num; | |
| if ((slot > ca->slot_count) || (slot < 0)) { | |
| err = -EINVAL; | |
| goto out_unlock; | |
| } | |
| info->type = CA_CI_LINK; | |
| info->flags = 0; | |
| sl = &ca->slot_info[slot]; | |
| if ((sl->slot_state != DVB_CA_SLOTSTATE_NONE) && | |
| (sl->slot_state != DVB_CA_SLOTSTATE_INVALID)) { | |
| info->flags = CA_CI_MODULE_PRESENT; | |
| } | |
| if (sl->slot_state == DVB_CA_SLOTSTATE_RUNNING) | |
| info->flags |= CA_CI_MODULE_READY; | |
| break; | |
| } | |
| default: | |
| err = -EINVAL; | |
| break; | |
| } | |
| out_unlock: | |
| mutex_unlock(&ca->ioctl_mutex); | |
| return err; | |
| } | |
| /** | |
| * Wrapper for ioctl implementation. | |
| * | |
| * @inode: Inode concerned. | |
| * @file: File concerned. | |
| * @cmd: IOCTL command. | |
| * @arg: Associated argument. | |
| * | |
| * @return 0 on success, <0 on error. | |
| */ | |
| static long dvb_ca_en50221_io_ioctl(struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| return dvb_usercopy(file, cmd, arg, dvb_ca_en50221_io_do_ioctl); | |
| } | |
| /** | |
| * Implementation of write() syscall. | |
| * | |
| * @file: File structure. | |
| * @buf: Source buffer. | |
| * @count: Size of source buffer. | |
| * @ppos: Position in file (ignored). | |
| * | |
| * @return Number of bytes read, or <0 on error. | |
| */ | |
| static ssize_t dvb_ca_en50221_io_write(struct file *file, | |
| const char __user *buf, size_t count, | |
| loff_t *ppos) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_ca_private *ca = dvbdev->priv; | |
| struct dvb_ca_slot *sl; | |
| u8 slot, connection_id; | |
| int status; | |
| u8 fragbuf[HOST_LINK_BUF_SIZE]; | |
| int fragpos = 0; | |
| int fraglen; | |
| unsigned long timeout; | |
| int written; | |
| dprintk("%s\n", __func__); | |
| /* | |
| * Incoming packet has a 2 byte header. | |
| * hdr[0] = slot_id, hdr[1] = connection_id | |
| */ | |
| if (count < 2) | |
| return -EINVAL; | |
| /* extract slot & connection id */ | |
| if (copy_from_user(&slot, buf, 1)) | |
| return -EFAULT; | |
| if (copy_from_user(&connection_id, buf + 1, 1)) | |
| return -EFAULT; | |
| buf += 2; | |
| count -= 2; | |
| sl = &ca->slot_info[slot]; | |
| /* check if the slot is actually running */ | |
| if (sl->slot_state != DVB_CA_SLOTSTATE_RUNNING) | |
| return -EINVAL; | |
| /* fragment the packets & store in the buffer */ | |
| while (fragpos < count) { | |
| fraglen = sl->link_buf_size - 2; | |
| if (fraglen < 0) | |
| break; | |
| if (fraglen > HOST_LINK_BUF_SIZE - 2) | |
| fraglen = HOST_LINK_BUF_SIZE - 2; | |
| if ((count - fragpos) < fraglen) | |
| fraglen = count - fragpos; | |
| fragbuf[0] = connection_id; | |
| fragbuf[1] = ((fragpos + fraglen) < count) ? 0x80 : 0x00; | |
| status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen); | |
| if (status) { | |
| status = -EFAULT; | |
| goto exit; | |
| } | |
| timeout = jiffies + HZ / 2; | |
| written = 0; | |
| while (!time_after(jiffies, timeout)) { | |
| /* | |
| * check the CAM hasn't been removed/reset in the | |
| * meantime | |
| */ | |
| if (sl->slot_state != DVB_CA_SLOTSTATE_RUNNING) { | |
| status = -EIO; | |
| goto exit; | |
| } | |
| mutex_lock(&sl->slot_lock); | |
| status = dvb_ca_en50221_write_data(ca, slot, fragbuf, | |
| fraglen + 2); | |
| mutex_unlock(&sl->slot_lock); | |
| if (status == (fraglen + 2)) { | |
| written = 1; | |
| break; | |
| } | |
| if (status != -EAGAIN) | |
| goto exit; | |
| usleep_range(1000, 1100); | |
| } | |
| if (!written) { | |
| status = -EIO; | |
| goto exit; | |
| } | |
| fragpos += fraglen; | |
| } | |
| status = count + 2; | |
| exit: | |
| return status; | |
| } | |
| /** | |
| * Condition for waking up in dvb_ca_en50221_io_read_condition | |
| */ | |
| static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca, | |
| int *result, int *_slot) | |
| { | |
| int slot; | |
| int slot_count = 0; | |
| int idx; | |
| size_t fraglen; | |
| int connection_id = -1; | |
| int found = 0; | |
| u8 hdr[2]; | |
| slot = ca->next_read_slot; | |
| while ((slot_count < ca->slot_count) && (!found)) { | |
| struct dvb_ca_slot *sl = &ca->slot_info[slot]; | |
| if (sl->slot_state != DVB_CA_SLOTSTATE_RUNNING) | |
| goto nextslot; | |
| if (!sl->rx_buffer.data) | |
| return 0; | |
| idx = dvb_ringbuffer_pkt_next(&sl->rx_buffer, -1, &fraglen); | |
| while (idx != -1) { | |
| dvb_ringbuffer_pkt_read(&sl->rx_buffer, idx, 0, hdr, 2); | |
| if (connection_id == -1) | |
| connection_id = hdr[0]; | |
| if ((hdr[0] == connection_id) && | |
| ((hdr[1] & 0x80) == 0)) { | |
| *_slot = slot; | |
| found = 1; | |
| break; | |
| } | |
| idx = dvb_ringbuffer_pkt_next(&sl->rx_buffer, idx, | |
| &fraglen); | |
| } | |
| nextslot: | |
| slot = (slot + 1) % ca->slot_count; | |
| slot_count++; | |
| } | |
| ca->next_read_slot = slot; | |
| return found; | |
| } | |
| /** | |
| * Implementation of read() syscall. | |
| * | |
| * @file: File structure. | |
| * @buf: Destination buffer. | |
| * @count: Size of destination buffer. | |
| * @ppos: Position in file (ignored). | |
| * | |
| * @return Number of bytes read, or <0 on error. | |
| */ | |
| static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_ca_private *ca = dvbdev->priv; | |
| struct dvb_ca_slot *sl; | |
| int status; | |
| int result = 0; | |
| u8 hdr[2]; | |
| int slot; | |
| int connection_id = -1; | |
| size_t idx, idx2; | |
| int last_fragment = 0; | |
| size_t fraglen; | |
| int pktlen; | |
| int dispose = 0; | |
| dprintk("%s\n", __func__); | |
| /* | |
| * Outgoing packet has a 2 byte header. | |
| * hdr[0] = slot_id, hdr[1] = connection_id | |
| */ | |
| if (count < 2) | |
| return -EINVAL; | |
| /* wait for some data */ | |
| status = dvb_ca_en50221_io_read_condition(ca, &result, &slot); | |
| if (status == 0) { | |
| /* if we're in nonblocking mode, exit immediately */ | |
| if (file->f_flags & O_NONBLOCK) | |
| return -EWOULDBLOCK; | |
| /* wait for some data */ | |
| status = wait_event_interruptible(ca->wait_queue, | |
| dvb_ca_en50221_io_read_condition | |
| (ca, &result, &slot)); | |
| } | |
| if ((status < 0) || (result < 0)) { | |
| if (result) | |
| return result; | |
| return status; | |
| } | |
| sl = &ca->slot_info[slot]; | |
| idx = dvb_ringbuffer_pkt_next(&sl->rx_buffer, -1, &fraglen); | |
| pktlen = 2; | |
| do { | |
| if (idx == -1) { | |
| pr_err("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n", | |
| ca->dvbdev->adapter->num); | |
| status = -EIO; | |
| goto exit; | |
| } | |
| dvb_ringbuffer_pkt_read(&sl->rx_buffer, idx, 0, hdr, 2); | |
| if (connection_id == -1) | |
| connection_id = hdr[0]; | |
| if (hdr[0] == connection_id) { | |
| if (pktlen < count) { | |
| if ((pktlen + fraglen - 2) > count) | |
| fraglen = count - pktlen; | |
| else | |
| fraglen -= 2; | |
| status = | |
| dvb_ringbuffer_pkt_read_user(&sl->rx_buffer, | |
| idx, 2, | |
| buf + pktlen, | |
| fraglen); | |
| if (status < 0) | |
| goto exit; | |
| pktlen += fraglen; | |
| } | |
| if ((hdr[1] & 0x80) == 0) | |
| last_fragment = 1; | |
| dispose = 1; | |
| } | |
| idx2 = dvb_ringbuffer_pkt_next(&sl->rx_buffer, idx, &fraglen); | |
| if (dispose) | |
| dvb_ringbuffer_pkt_dispose(&sl->rx_buffer, idx); | |
| idx = idx2; | |
| dispose = 0; | |
| } while (!last_fragment); | |
| hdr[0] = slot; | |
| hdr[1] = connection_id; | |
| status = copy_to_user(buf, hdr, 2); | |
| if (status) { | |
| status = -EFAULT; | |
| goto exit; | |
| } | |
| status = pktlen; | |
| exit: | |
| return status; | |
| } | |
| /** | |
| * Implementation of file open syscall. | |
| * | |
| * @inode: Inode concerned. | |
| * @file: File concerned. | |
| * | |
| * @return 0 on success, <0 on failure. | |
| */ | |
| static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_ca_private *ca = dvbdev->priv; | |
| int err; | |
| int i; | |
| dprintk("%s\n", __func__); | |
| if (!try_module_get(ca->pub->owner)) | |
| return -EIO; | |
| err = dvb_generic_open(inode, file); | |
| if (err < 0) { | |
| module_put(ca->pub->owner); | |
| return err; | |
| } | |
| for (i = 0; i < ca->slot_count; i++) { | |
| struct dvb_ca_slot *sl = &ca->slot_info[i]; | |
| if (sl->slot_state == DVB_CA_SLOTSTATE_RUNNING) { | |
| if (!sl->rx_buffer.data) { | |
| /* | |
| * it is safe to call this here without locks | |
| * because ca->open == 0. Data is not read in | |
| * this case | |
| */ | |
| dvb_ringbuffer_flush(&sl->rx_buffer); | |
| } | |
| } | |
| } | |
| ca->open = 1; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| dvb_ca_en50221_thread_wakeup(ca); | |
| dvb_ca_private_get(ca); | |
| return 0; | |
| } | |
| /** | |
| * Implementation of file close syscall. | |
| * | |
| * @inode: Inode concerned. | |
| * @file: File concerned. | |
| * | |
| * @return 0 on success, <0 on failure. | |
| */ | |
| static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_ca_private *ca = dvbdev->priv; | |
| int err; | |
| dprintk("%s\n", __func__); | |
| /* mark the CA device as closed */ | |
| ca->open = 0; | |
| dvb_ca_en50221_thread_update_delay(ca); | |
| err = dvb_generic_release(inode, file); | |
| module_put(ca->pub->owner); | |
| dvb_ca_private_put(ca); | |
| return err; | |
| } | |
| /** | |
| * Implementation of poll() syscall. | |
| * | |
| * @file: File concerned. | |
| * @wait: poll wait table. | |
| * | |
| * @return Standard poll mask. | |
| */ | |
| static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table *wait) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_ca_private *ca = dvbdev->priv; | |
| unsigned int mask = 0; | |
| int slot; | |
| int result = 0; | |
| dprintk("%s\n", __func__); | |
| if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) | |
| mask |= POLLIN; | |
| /* if there is something, return now */ | |
| if (mask) | |
| return mask; | |
| /* wait for something to happen */ | |
| poll_wait(file, &ca->wait_queue, wait); | |
| if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) | |
| mask |= POLLIN; | |
| return mask; | |
| } | |
| static const struct file_operations dvb_ca_fops = { | |
| .owner = THIS_MODULE, | |
| .read = dvb_ca_en50221_io_read, | |
| .write = dvb_ca_en50221_io_write, | |
| .unlocked_ioctl = dvb_ca_en50221_io_ioctl, | |
| .open = dvb_ca_en50221_io_open, | |
| .release = dvb_ca_en50221_io_release, | |
| .poll = dvb_ca_en50221_io_poll, | |
| .llseek = noop_llseek, | |
| }; | |
| static const struct dvb_device dvbdev_ca = { | |
| .priv = NULL, | |
| .users = 1, | |
| .readers = 1, | |
| .writers = 1, | |
| #if defined(CONFIG_MEDIA_CONTROLLER_DVB) | |
| .name = "dvb-ca-en50221", | |
| #endif | |
| .fops = &dvb_ca_fops, | |
| }; | |
| /* ************************************************************************** */ | |
| /* Initialisation/shutdown functions */ | |
| /** | |
| * Initialise a new DVB CA EN50221 interface device. | |
| * | |
| * @dvb_adapter: DVB adapter to attach the new CA device to. | |
| * @ca: The dvb_ca instance. | |
| * @flags: Flags describing the CA device (DVB_CA_FLAG_*). | |
| * @slot_count: Number of slots supported. | |
| * | |
| * @return 0 on success, nonzero on failure | |
| */ | |
| int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, | |
| struct dvb_ca_en50221 *pubca, int flags, int slot_count) | |
| { | |
| int ret; | |
| struct dvb_ca_private *ca = NULL; | |
| int i; | |
| dprintk("%s\n", __func__); | |
| if (slot_count < 1) | |
| return -EINVAL; | |
| /* initialise the system data */ | |
| ca = kzalloc(sizeof(*ca), GFP_KERNEL); | |
| if (!ca) { | |
| ret = -ENOMEM; | |
| goto exit; | |
| } | |
| kref_init(&ca->refcount); | |
| ca->pub = pubca; | |
| ca->flags = flags; | |
| ca->slot_count = slot_count; | |
| ca->slot_info = kcalloc(slot_count, sizeof(struct dvb_ca_slot), | |
| GFP_KERNEL); | |
| if (!ca->slot_info) { | |
| ret = -ENOMEM; | |
| goto free_ca; | |
| } | |
| init_waitqueue_head(&ca->wait_queue); | |
| ca->open = 0; | |
| ca->wakeup = 0; | |
| ca->next_read_slot = 0; | |
| pubca->private = ca; | |
| /* register the DVB device */ | |
| ret = dvb_register_device(dvb_adapter, &ca->dvbdev, &dvbdev_ca, ca, | |
| DVB_DEVICE_CA, 0); | |
| if (ret) | |
| goto free_slot_info; | |
| /* now initialise each slot */ | |
| for (i = 0; i < slot_count; i++) { | |
| struct dvb_ca_slot *sl = &ca->slot_info[i]; | |
| memset(sl, 0, sizeof(struct dvb_ca_slot)); | |
| sl->slot_state = DVB_CA_SLOTSTATE_NONE; | |
| atomic_set(&sl->camchange_count, 0); | |
| sl->camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; | |
| mutex_init(&sl->slot_lock); | |
| } | |
| mutex_init(&ca->ioctl_mutex); | |
| if (signal_pending(current)) { | |
| ret = -EINTR; | |
| goto unregister_device; | |
| } | |
| mb(); | |
| /* create a kthread for monitoring this CA device */ | |
| ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i", | |
| ca->dvbdev->adapter->num, ca->dvbdev->id); | |
| if (IS_ERR(ca->thread)) { | |
| ret = PTR_ERR(ca->thread); | |
| pr_err("dvb_ca_init: failed to start kernel_thread (%d)\n", | |
| ret); | |
| goto unregister_device; | |
| } | |
| return 0; | |
| unregister_device: | |
| dvb_unregister_device(ca->dvbdev); | |
| free_slot_info: | |
| kfree(ca->slot_info); | |
| free_ca: | |
| kfree(ca); | |
| exit: | |
| pubca->private = NULL; | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(dvb_ca_en50221_init); | |
| /** | |
| * Release a DVB CA EN50221 interface device. | |
| * | |
| * @ca_dev: The dvb_device_t instance for the CA device. | |
| * @ca: The associated dvb_ca instance. | |
| */ | |
| void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca) | |
| { | |
| struct dvb_ca_private *ca = pubca->private; | |
| int i; | |
| dprintk("%s\n", __func__); | |
| /* shutdown the thread if there was one */ | |
| kthread_stop(ca->thread); | |
| for (i = 0; i < ca->slot_count; i++) | |
| dvb_ca_en50221_slot_shutdown(ca, i); | |
| dvb_remove_device(ca->dvbdev); | |
| dvb_ca_private_put(ca); | |
| pubca->private = NULL; | |
| } | |
| EXPORT_SYMBOL(dvb_ca_en50221_release); |