| /* | |
| * Linux-DVB Driver for DiBcom's second generation DiB7000P (PC). | |
| * | |
| * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation, version 2. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/i2c.h> | |
| #include <linux/mutex.h> | |
| #include <asm/div64.h> | |
| #include "dvb_math.h" | |
| #include "dvb_frontend.h" | |
| #include "dib7000p.h" | |
| static int debug; | |
| module_param(debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); | |
| static int buggy_sfn_workaround; | |
| module_param(buggy_sfn_workaround, int, 0644); | |
| MODULE_PARM_DESC(buggy_sfn_workaround, "Enable work-around for buggy SFNs (default: 0)"); | |
| #define dprintk(fmt, arg...) do { \ | |
| if (debug) \ | |
| printk(KERN_DEBUG pr_fmt("%s: " fmt), \ | |
| __func__, ##arg); \ | |
| } while (0) | |
| struct i2c_device { | |
| struct i2c_adapter *i2c_adap; | |
| u8 i2c_addr; | |
| }; | |
| struct dib7000p_state { | |
| struct dvb_frontend demod; | |
| struct dib7000p_config cfg; | |
| u8 i2c_addr; | |
| struct i2c_adapter *i2c_adap; | |
| struct dibx000_i2c_master i2c_master; | |
| u16 wbd_ref; | |
| u8 current_band; | |
| u32 current_bandwidth; | |
| struct dibx000_agc_config *current_agc; | |
| u32 timf; | |
| u8 div_force_off:1; | |
| u8 div_state:1; | |
| u16 div_sync_wait; | |
| u8 agc_state; | |
| u16 gpio_dir; | |
| u16 gpio_val; | |
| u8 sfn_workaround_active:1; | |
| #define SOC7090 0x7090 | |
| u16 version; | |
| u16 tuner_enable; | |
| struct i2c_adapter dib7090_tuner_adap; | |
| /* for the I2C transfer */ | |
| struct i2c_msg msg[2]; | |
| u8 i2c_write_buffer[4]; | |
| u8 i2c_read_buffer[2]; | |
| struct mutex i2c_buffer_lock; | |
| u8 input_mode_mpeg; | |
| /* for DVBv5 stats */ | |
| s64 old_ucb; | |
| unsigned long per_jiffies_stats; | |
| unsigned long ber_jiffies_stats; | |
| unsigned long get_stats_time; | |
| }; | |
| enum dib7000p_power_mode { | |
| DIB7000P_POWER_ALL = 0, | |
| DIB7000P_POWER_ANALOG_ADC, | |
| DIB7000P_POWER_INTERFACE_ONLY, | |
| }; | |
| /* dib7090 specific fonctions */ | |
| static int dib7090_set_output_mode(struct dvb_frontend *fe, int mode); | |
| static int dib7090_set_diversity_in(struct dvb_frontend *fe, int onoff); | |
| static void dib7090_setDibTxMux(struct dib7000p_state *state, int mode); | |
| static void dib7090_setHostBusMux(struct dib7000p_state *state, int mode); | |
| static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg) | |
| { | |
| u16 ret; | |
| if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { | |
| dprintk("could not acquire lock\n"); | |
| return 0; | |
| } | |
| state->i2c_write_buffer[0] = reg >> 8; | |
| state->i2c_write_buffer[1] = reg & 0xff; | |
| memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); | |
| state->msg[0].addr = state->i2c_addr >> 1; | |
| state->msg[0].flags = 0; | |
| state->msg[0].buf = state->i2c_write_buffer; | |
| state->msg[0].len = 2; | |
| state->msg[1].addr = state->i2c_addr >> 1; | |
| state->msg[1].flags = I2C_M_RD; | |
| state->msg[1].buf = state->i2c_read_buffer; | |
| state->msg[1].len = 2; | |
| if (i2c_transfer(state->i2c_adap, state->msg, 2) != 2) | |
| dprintk("i2c read error on %d\n", reg); | |
| ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1]; | |
| mutex_unlock(&state->i2c_buffer_lock); | |
| return ret; | |
| } | |
| static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val) | |
| { | |
| int ret; | |
| if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { | |
| dprintk("could not acquire lock\n"); | |
| return -EINVAL; | |
| } | |
| state->i2c_write_buffer[0] = (reg >> 8) & 0xff; | |
| state->i2c_write_buffer[1] = reg & 0xff; | |
| state->i2c_write_buffer[2] = (val >> 8) & 0xff; | |
| state->i2c_write_buffer[3] = val & 0xff; | |
| memset(&state->msg[0], 0, sizeof(struct i2c_msg)); | |
| state->msg[0].addr = state->i2c_addr >> 1; | |
| state->msg[0].flags = 0; | |
| state->msg[0].buf = state->i2c_write_buffer; | |
| state->msg[0].len = 4; | |
| ret = (i2c_transfer(state->i2c_adap, state->msg, 1) != 1 ? | |
| -EREMOTEIO : 0); | |
| mutex_unlock(&state->i2c_buffer_lock); | |
| return ret; | |
| } | |
| static void dib7000p_write_tab(struct dib7000p_state *state, u16 * buf) | |
| { | |
| u16 l = 0, r, *n; | |
| n = buf; | |
| l = *n++; | |
| while (l) { | |
| r = *n++; | |
| do { | |
| dib7000p_write_word(state, r, *n++); | |
| r++; | |
| } while (--l); | |
| l = *n++; | |
| } | |
| } | |
| static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode) | |
| { | |
| int ret = 0; | |
| u16 outreg, fifo_threshold, smo_mode; | |
| outreg = 0; | |
| fifo_threshold = 1792; | |
| smo_mode = (dib7000p_read_word(state, 235) & 0x0050) | (1 << 1); | |
| dprintk("setting output mode for demod %p to %d\n", &state->demod, mode); | |
| switch (mode) { | |
| case OUTMODE_MPEG2_PAR_GATED_CLK: | |
| outreg = (1 << 10); /* 0x0400 */ | |
| break; | |
| case OUTMODE_MPEG2_PAR_CONT_CLK: | |
| outreg = (1 << 10) | (1 << 6); /* 0x0440 */ | |
| break; | |
| case OUTMODE_MPEG2_SERIAL: | |
| outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0480 */ | |
| break; | |
| case OUTMODE_DIVERSITY: | |
| if (state->cfg.hostbus_diversity) | |
| outreg = (1 << 10) | (4 << 6); /* 0x0500 */ | |
| else | |
| outreg = (1 << 11); | |
| break; | |
| case OUTMODE_MPEG2_FIFO: | |
| smo_mode |= (3 << 1); | |
| fifo_threshold = 512; | |
| outreg = (1 << 10) | (5 << 6); | |
| break; | |
| case OUTMODE_ANALOG_ADC: | |
| outreg = (1 << 10) | (3 << 6); | |
| break; | |
| case OUTMODE_HIGH_Z: | |
| outreg = 0; | |
| break; | |
| default: | |
| dprintk("Unhandled output_mode passed to be set for demod %p\n", &state->demod); | |
| break; | |
| } | |
| if (state->cfg.output_mpeg2_in_188_bytes) | |
| smo_mode |= (1 << 5); | |
| ret |= dib7000p_write_word(state, 235, smo_mode); | |
| ret |= dib7000p_write_word(state, 236, fifo_threshold); /* synchronous fread */ | |
| if (state->version != SOC7090) | |
| ret |= dib7000p_write_word(state, 1286, outreg); /* P_Div_active */ | |
| return ret; | |
| } | |
| static int dib7000p_set_diversity_in(struct dvb_frontend *demod, int onoff) | |
| { | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| if (state->div_force_off) { | |
| dprintk("diversity combination deactivated - forced by COFDM parameters\n"); | |
| onoff = 0; | |
| dib7000p_write_word(state, 207, 0); | |
| } else | |
| dib7000p_write_word(state, 207, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0)); | |
| state->div_state = (u8) onoff; | |
| if (onoff) { | |
| dib7000p_write_word(state, 204, 6); | |
| dib7000p_write_word(state, 205, 16); | |
| /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */ | |
| } else { | |
| dib7000p_write_word(state, 204, 1); | |
| dib7000p_write_word(state, 205, 0); | |
| } | |
| return 0; | |
| } | |
| static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode) | |
| { | |
| /* by default everything is powered off */ | |
| u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0x0007, reg_899 = 0x0003, reg_1280 = (0xfe00) | (dib7000p_read_word(state, 1280) & 0x01ff); | |
| /* now, depending on the requested mode, we power on */ | |
| switch (mode) { | |
| /* power up everything in the demod */ | |
| case DIB7000P_POWER_ALL: | |
| reg_774 = 0x0000; | |
| reg_775 = 0x0000; | |
| reg_776 = 0x0; | |
| reg_899 = 0x0; | |
| if (state->version == SOC7090) | |
| reg_1280 &= 0x001f; | |
| else | |
| reg_1280 &= 0x01ff; | |
| break; | |
| case DIB7000P_POWER_ANALOG_ADC: | |
| /* dem, cfg, iqc, sad, agc */ | |
| reg_774 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10) | (1 << 9)); | |
| /* nud */ | |
| reg_776 &= ~((1 << 0)); | |
| /* Dout */ | |
| if (state->version != SOC7090) | |
| reg_1280 &= ~((1 << 11)); | |
| reg_1280 &= ~(1 << 6); | |
| /* fall-through */ | |
| case DIB7000P_POWER_INTERFACE_ONLY: | |
| /* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */ | |
| /* TODO power up either SDIO or I2C */ | |
| if (state->version == SOC7090) | |
| reg_1280 &= ~((1 << 7) | (1 << 5)); | |
| else | |
| reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10)); | |
| break; | |
| /* TODO following stuff is just converted from the dib7000-driver - check when is used what */ | |
| } | |
| dib7000p_write_word(state, 774, reg_774); | |
| dib7000p_write_word(state, 775, reg_775); | |
| dib7000p_write_word(state, 776, reg_776); | |
| dib7000p_write_word(state, 1280, reg_1280); | |
| if (state->version != SOC7090) | |
| dib7000p_write_word(state, 899, reg_899); | |
| return 0; | |
| } | |
| static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_adc_states no) | |
| { | |
| u16 reg_908 = 0, reg_909 = 0; | |
| u16 reg; | |
| if (state->version != SOC7090) { | |
| reg_908 = dib7000p_read_word(state, 908); | |
| reg_909 = dib7000p_read_word(state, 909); | |
| } | |
| switch (no) { | |
| case DIBX000_SLOW_ADC_ON: | |
| if (state->version == SOC7090) { | |
| reg = dib7000p_read_word(state, 1925); | |
| dib7000p_write_word(state, 1925, reg | (1 << 4) | (1 << 2)); /* en_slowAdc = 1 & reset_sladc = 1 */ | |
| reg = dib7000p_read_word(state, 1925); /* read acces to make it works... strange ... */ | |
| msleep(200); | |
| dib7000p_write_word(state, 1925, reg & ~(1 << 4)); /* en_slowAdc = 1 & reset_sladc = 0 */ | |
| reg = dib7000p_read_word(state, 72) & ~((0x3 << 14) | (0x3 << 12)); | |
| dib7000p_write_word(state, 72, reg | (1 << 14) | (3 << 12) | 524); /* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ; (Vin2 = Vcm) */ | |
| } else { | |
| reg_909 |= (1 << 1) | (1 << 0); | |
| dib7000p_write_word(state, 909, reg_909); | |
| reg_909 &= ~(1 << 1); | |
| } | |
| break; | |
| case DIBX000_SLOW_ADC_OFF: | |
| if (state->version == SOC7090) { | |
| reg = dib7000p_read_word(state, 1925); | |
| dib7000p_write_word(state, 1925, (reg & ~(1 << 2)) | (1 << 4)); /* reset_sladc = 1 en_slowAdc = 0 */ | |
| } else | |
| reg_909 |= (1 << 1) | (1 << 0); | |
| break; | |
| case DIBX000_ADC_ON: | |
| reg_908 &= 0x0fff; | |
| reg_909 &= 0x0003; | |
| break; | |
| case DIBX000_ADC_OFF: | |
| reg_908 |= (1 << 14) | (1 << 13) | (1 << 12); | |
| reg_909 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2); | |
| break; | |
| case DIBX000_VBG_ENABLE: | |
| reg_908 &= ~(1 << 15); | |
| break; | |
| case DIBX000_VBG_DISABLE: | |
| reg_908 |= (1 << 15); | |
| break; | |
| default: | |
| break; | |
| } | |
| // dprintk( "908: %x, 909: %x\n", reg_908, reg_909); | |
| reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4; | |
| reg_908 |= (state->cfg.enable_current_mirror & 1) << 7; | |
| if (state->version != SOC7090) { | |
| dib7000p_write_word(state, 908, reg_908); | |
| dib7000p_write_word(state, 909, reg_909); | |
| } | |
| } | |
| static int dib7000p_set_bandwidth(struct dib7000p_state *state, u32 bw) | |
| { | |
| u32 timf; | |
| // store the current bandwidth for later use | |
| state->current_bandwidth = bw; | |
| if (state->timf == 0) { | |
| dprintk("using default timf\n"); | |
| timf = state->cfg.bw->timf; | |
| } else { | |
| dprintk("using updated timf\n"); | |
| timf = state->timf; | |
| } | |
| timf = timf * (bw / 50) / 160; | |
| dib7000p_write_word(state, 23, (u16) ((timf >> 16) & 0xffff)); | |
| dib7000p_write_word(state, 24, (u16) ((timf) & 0xffff)); | |
| return 0; | |
| } | |
| static int dib7000p_sad_calib(struct dib7000p_state *state) | |
| { | |
| /* internal */ | |
| dib7000p_write_word(state, 73, (0 << 1) | (0 << 0)); | |
| if (state->version == SOC7090) | |
| dib7000p_write_word(state, 74, 2048); | |
| else | |
| dib7000p_write_word(state, 74, 776); | |
| /* do the calibration */ | |
| dib7000p_write_word(state, 73, (1 << 0)); | |
| dib7000p_write_word(state, 73, (0 << 0)); | |
| msleep(1); | |
| return 0; | |
| } | |
| static int dib7000p_set_wbd_ref(struct dvb_frontend *demod, u16 value) | |
| { | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| if (value > 4095) | |
| value = 4095; | |
| state->wbd_ref = value; | |
| return dib7000p_write_word(state, 105, (dib7000p_read_word(state, 105) & 0xf000) | value); | |
| } | |
| static int dib7000p_get_agc_values(struct dvb_frontend *fe, | |
| u16 *agc_global, u16 *agc1, u16 *agc2, u16 *wbd) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| if (agc_global != NULL) | |
| *agc_global = dib7000p_read_word(state, 394); | |
| if (agc1 != NULL) | |
| *agc1 = dib7000p_read_word(state, 392); | |
| if (agc2 != NULL) | |
| *agc2 = dib7000p_read_word(state, 393); | |
| if (wbd != NULL) | |
| *wbd = dib7000p_read_word(state, 397); | |
| return 0; | |
| } | |
| static int dib7000p_set_agc1_min(struct dvb_frontend *fe, u16 v) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| return dib7000p_write_word(state, 108, v); | |
| } | |
| static void dib7000p_reset_pll(struct dib7000p_state *state) | |
| { | |
| struct dibx000_bandwidth_config *bw = &state->cfg.bw[0]; | |
| u16 clk_cfg0; | |
| if (state->version == SOC7090) { | |
| dib7000p_write_word(state, 1856, (!bw->pll_reset << 13) | (bw->pll_range << 12) | (bw->pll_ratio << 6) | (bw->pll_prediv)); | |
| while (((dib7000p_read_word(state, 1856) >> 15) & 0x1) != 1) | |
| ; | |
| dib7000p_write_word(state, 1857, dib7000p_read_word(state, 1857) | (!bw->pll_bypass << 15)); | |
| } else { | |
| /* force PLL bypass */ | |
| clk_cfg0 = (1 << 15) | ((bw->pll_ratio & 0x3f) << 9) | | |
| (bw->modulo << 7) | (bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0); | |
| dib7000p_write_word(state, 900, clk_cfg0); | |
| /* P_pll_cfg */ | |
| dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset); | |
| clk_cfg0 = (bw->pll_bypass << 15) | (clk_cfg0 & 0x7fff); | |
| dib7000p_write_word(state, 900, clk_cfg0); | |
| } | |
| dib7000p_write_word(state, 18, (u16) (((bw->internal * 1000) >> 16) & 0xffff)); | |
| dib7000p_write_word(state, 19, (u16) ((bw->internal * 1000) & 0xffff)); | |
| dib7000p_write_word(state, 21, (u16) ((bw->ifreq >> 16) & 0xffff)); | |
| dib7000p_write_word(state, 22, (u16) ((bw->ifreq) & 0xffff)); | |
| dib7000p_write_word(state, 72, bw->sad_cfg); | |
| } | |
| static u32 dib7000p_get_internal_freq(struct dib7000p_state *state) | |
| { | |
| u32 internal = (u32) dib7000p_read_word(state, 18) << 16; | |
| internal |= (u32) dib7000p_read_word(state, 19); | |
| internal /= 1000; | |
| return internal; | |
| } | |
| static int dib7000p_update_pll(struct dvb_frontend *fe, struct dibx000_bandwidth_config *bw) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 reg_1857, reg_1856 = dib7000p_read_word(state, 1856); | |
| u8 loopdiv, prediv; | |
| u32 internal, xtal; | |
| /* get back old values */ | |
| prediv = reg_1856 & 0x3f; | |
| loopdiv = (reg_1856 >> 6) & 0x3f; | |
| if ((bw != NULL) && (bw->pll_prediv != prediv || bw->pll_ratio != loopdiv)) { | |
| dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)\n", prediv, bw->pll_prediv, loopdiv, bw->pll_ratio); | |
| reg_1856 &= 0xf000; | |
| reg_1857 = dib7000p_read_word(state, 1857); | |
| dib7000p_write_word(state, 1857, reg_1857 & ~(1 << 15)); | |
| dib7000p_write_word(state, 1856, reg_1856 | ((bw->pll_ratio & 0x3f) << 6) | (bw->pll_prediv & 0x3f)); | |
| /* write new system clk into P_sec_len */ | |
| internal = dib7000p_get_internal_freq(state); | |
| xtal = (internal / loopdiv) * prediv; | |
| internal = 1000 * (xtal / bw->pll_prediv) * bw->pll_ratio; /* new internal */ | |
| dib7000p_write_word(state, 18, (u16) ((internal >> 16) & 0xffff)); | |
| dib7000p_write_word(state, 19, (u16) (internal & 0xffff)); | |
| dib7000p_write_word(state, 1857, reg_1857 | (1 << 15)); | |
| while (((dib7000p_read_word(state, 1856) >> 15) & 0x1) != 1) | |
| dprintk("Waiting for PLL to lock\n"); | |
| return 0; | |
| } | |
| return -EIO; | |
| } | |
| static int dib7000p_reset_gpio(struct dib7000p_state *st) | |
| { | |
| /* reset the GPIOs */ | |
| dprintk("gpio dir: %x: val: %x, pwm_pos: %x\n", st->gpio_dir, st->gpio_val, st->cfg.gpio_pwm_pos); | |
| dib7000p_write_word(st, 1029, st->gpio_dir); | |
| dib7000p_write_word(st, 1030, st->gpio_val); | |
| /* TODO 1031 is P_gpio_od */ | |
| dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos); | |
| dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div); | |
| return 0; | |
| } | |
| static int dib7000p_cfg_gpio(struct dib7000p_state *st, u8 num, u8 dir, u8 val) | |
| { | |
| st->gpio_dir = dib7000p_read_word(st, 1029); | |
| st->gpio_dir &= ~(1 << num); /* reset the direction bit */ | |
| st->gpio_dir |= (dir & 0x1) << num; /* set the new direction */ | |
| dib7000p_write_word(st, 1029, st->gpio_dir); | |
| st->gpio_val = dib7000p_read_word(st, 1030); | |
| st->gpio_val &= ~(1 << num); /* reset the direction bit */ | |
| st->gpio_val |= (val & 0x01) << num; /* set the new value */ | |
| dib7000p_write_word(st, 1030, st->gpio_val); | |
| return 0; | |
| } | |
| static int dib7000p_set_gpio(struct dvb_frontend *demod, u8 num, u8 dir, u8 val) | |
| { | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| return dib7000p_cfg_gpio(state, num, dir, val); | |
| } | |
| static u16 dib7000p_defaults[] = { | |
| // auto search configuration | |
| 3, 2, | |
| 0x0004, | |
| (1<<3)|(1<<11)|(1<<12)|(1<<13), | |
| 0x0814, /* Equal Lock */ | |
| 12, 6, | |
| 0x001b, | |
| 0x7740, | |
| 0x005b, | |
| 0x8d80, | |
| 0x01c9, | |
| 0xc380, | |
| 0x0000, | |
| 0x0080, | |
| 0x0000, | |
| 0x0090, | |
| 0x0001, | |
| 0xd4c0, | |
| 1, 26, | |
| 0x6680, | |
| /* set ADC level to -16 */ | |
| 11, 79, | |
| (1 << 13) - 825 - 117, | |
| (1 << 13) - 837 - 117, | |
| (1 << 13) - 811 - 117, | |
| (1 << 13) - 766 - 117, | |
| (1 << 13) - 737 - 117, | |
| (1 << 13) - 693 - 117, | |
| (1 << 13) - 648 - 117, | |
| (1 << 13) - 619 - 117, | |
| (1 << 13) - 575 - 117, | |
| (1 << 13) - 531 - 117, | |
| (1 << 13) - 501 - 117, | |
| 1, 142, | |
| 0x0410, | |
| /* disable power smoothing */ | |
| 8, 145, | |
| 0, | |
| 0, | |
| 0, | |
| 0, | |
| 0, | |
| 0, | |
| 0, | |
| 0, | |
| 1, 154, | |
| 1 << 13, | |
| 1, 168, | |
| 0x0ccd, | |
| 1, 183, | |
| 0x200f, | |
| 1, 212, | |
| 0x169, | |
| 5, 187, | |
| 0x023d, | |
| 0x00a4, | |
| 0x00a4, | |
| 0x7ff0, | |
| 0x3ccc, | |
| 1, 198, | |
| 0x800, | |
| 1, 222, | |
| 0x0010, | |
| 1, 235, | |
| 0x0062, | |
| 0, | |
| }; | |
| static void dib7000p_reset_stats(struct dvb_frontend *fe); | |
| static int dib7000p_demod_reset(struct dib7000p_state *state) | |
| { | |
| dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); | |
| if (state->version == SOC7090) | |
| dibx000_reset_i2c_master(&state->i2c_master); | |
| dib7000p_set_adc_state(state, DIBX000_VBG_ENABLE); | |
| /* restart all parts */ | |
| dib7000p_write_word(state, 770, 0xffff); | |
| dib7000p_write_word(state, 771, 0xffff); | |
| dib7000p_write_word(state, 772, 0x001f); | |
| dib7000p_write_word(state, 1280, 0x001f - ((1 << 4) | (1 << 3))); | |
| dib7000p_write_word(state, 770, 0); | |
| dib7000p_write_word(state, 771, 0); | |
| dib7000p_write_word(state, 772, 0); | |
| dib7000p_write_word(state, 1280, 0); | |
| if (state->version != SOC7090) { | |
| dib7000p_write_word(state, 898, 0x0003); | |
| dib7000p_write_word(state, 898, 0); | |
| } | |
| /* default */ | |
| dib7000p_reset_pll(state); | |
| if (dib7000p_reset_gpio(state) != 0) | |
| dprintk("GPIO reset was not successful.\n"); | |
| if (state->version == SOC7090) { | |
| dib7000p_write_word(state, 899, 0); | |
| /* impulse noise */ | |
| dib7000p_write_word(state, 42, (1<<5) | 3); /* P_iqc_thsat_ipc = 1 ; P_iqc_win2 = 3 */ | |
| dib7000p_write_word(state, 43, 0x2d4); /*-300 fag P_iqc_dect_min = -280 */ | |
| dib7000p_write_word(state, 44, 300); /* 300 fag P_iqc_dect_min = +280 */ | |
| dib7000p_write_word(state, 273, (0<<6) | 30); | |
| } | |
| if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0) | |
| dprintk("OUTPUT_MODE could not be reset.\n"); | |
| dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON); | |
| dib7000p_sad_calib(state); | |
| dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_OFF); | |
| /* unforce divstr regardless whether i2c enumeration was done or not */ | |
| dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1)); | |
| dib7000p_set_bandwidth(state, 8000); | |
| if (state->version == SOC7090) { | |
| dib7000p_write_word(state, 36, 0x0755);/* P_iqc_impnc_on =1 & P_iqc_corr_inh = 1 for impulsive noise */ | |
| } else { | |
| if (state->cfg.tuner_is_baseband) | |
| dib7000p_write_word(state, 36, 0x0755); | |
| else | |
| dib7000p_write_word(state, 36, 0x1f55); | |
| } | |
| dib7000p_write_tab(state, dib7000p_defaults); | |
| if (state->version != SOC7090) { | |
| dib7000p_write_word(state, 901, 0x0006); | |
| dib7000p_write_word(state, 902, (3 << 10) | (1 << 6)); | |
| dib7000p_write_word(state, 905, 0x2c8e); | |
| } | |
| dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); | |
| return 0; | |
| } | |
| static void dib7000p_pll_clk_cfg(struct dib7000p_state *state) | |
| { | |
| u16 tmp = 0; | |
| tmp = dib7000p_read_word(state, 903); | |
| dib7000p_write_word(state, 903, (tmp | 0x1)); | |
| tmp = dib7000p_read_word(state, 900); | |
| dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6)); | |
| } | |
| static void dib7000p_restart_agc(struct dib7000p_state *state) | |
| { | |
| // P_restart_iqc & P_restart_agc | |
| dib7000p_write_word(state, 770, (1 << 11) | (1 << 9)); | |
| dib7000p_write_word(state, 770, 0x0000); | |
| } | |
| static int dib7000p_update_lna(struct dib7000p_state *state) | |
| { | |
| u16 dyn_gain; | |
| if (state->cfg.update_lna) { | |
| dyn_gain = dib7000p_read_word(state, 394); | |
| if (state->cfg.update_lna(&state->demod, dyn_gain)) { | |
| dib7000p_restart_agc(state); | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int dib7000p_set_agc_config(struct dib7000p_state *state, u8 band) | |
| { | |
| struct dibx000_agc_config *agc = NULL; | |
| int i; | |
| if (state->current_band == band && state->current_agc != NULL) | |
| return 0; | |
| state->current_band = band; | |
| for (i = 0; i < state->cfg.agc_config_count; i++) | |
| if (state->cfg.agc[i].band_caps & band) { | |
| agc = &state->cfg.agc[i]; | |
| break; | |
| } | |
| if (agc == NULL) { | |
| dprintk("no valid AGC configuration found for band 0x%02x\n", band); | |
| return -EINVAL; | |
| } | |
| state->current_agc = agc; | |
| /* AGC */ | |
| dib7000p_write_word(state, 75, agc->setup); | |
| dib7000p_write_word(state, 76, agc->inv_gain); | |
| dib7000p_write_word(state, 77, agc->time_stabiliz); | |
| dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock); | |
| // Demod AGC loop configuration | |
| dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp); | |
| dib7000p_write_word(state, 102, (agc->beta_mant << 6) | agc->beta_exp); | |
| /* AGC continued */ | |
| dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d\n", | |
| state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel); | |
| if (state->wbd_ref != 0) | |
| dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref); | |
| else | |
| dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref); | |
| dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8)); | |
| dib7000p_write_word(state, 107, agc->agc1_max); | |
| dib7000p_write_word(state, 108, agc->agc1_min); | |
| dib7000p_write_word(state, 109, agc->agc2_max); | |
| dib7000p_write_word(state, 110, agc->agc2_min); | |
| dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2); | |
| dib7000p_write_word(state, 112, agc->agc1_pt3); | |
| dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2); | |
| dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2); | |
| dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2); | |
| return 0; | |
| } | |
| static int dib7000p_set_dds(struct dib7000p_state *state, s32 offset_khz) | |
| { | |
| u32 internal = dib7000p_get_internal_freq(state); | |
| s32 unit_khz_dds_val; | |
| u32 abs_offset_khz = ABS(offset_khz); | |
| u32 dds = state->cfg.bw->ifreq & 0x1ffffff; | |
| u8 invert = !!(state->cfg.bw->ifreq & (1 << 25)); | |
| if (internal == 0) { | |
| pr_warn("DIB7000P: dib7000p_get_internal_freq returned 0\n"); | |
| return -1; | |
| } | |
| /* 2**26 / Fsampling is the unit 1KHz offset */ | |
| unit_khz_dds_val = 67108864 / (internal); | |
| dprintk("setting a frequency offset of %dkHz internal freq = %d invert = %d\n", offset_khz, internal, invert); | |
| if (offset_khz < 0) | |
| unit_khz_dds_val *= -1; | |
| /* IF tuner */ | |
| if (invert) | |
| dds -= (abs_offset_khz * unit_khz_dds_val); /* /100 because of /100 on the unit_khz_dds_val line calc for better accuracy */ | |
| else | |
| dds += (abs_offset_khz * unit_khz_dds_val); | |
| if (abs_offset_khz <= (internal / 2)) { /* Max dds offset is the half of the demod freq */ | |
| dib7000p_write_word(state, 21, (u16) (((dds >> 16) & 0x1ff) | (0 << 10) | (invert << 9))); | |
| dib7000p_write_word(state, 22, (u16) (dds & 0xffff)); | |
| } | |
| return 0; | |
| } | |
| static int dib7000p_agc_startup(struct dvb_frontend *demod) | |
| { | |
| struct dtv_frontend_properties *ch = &demod->dtv_property_cache; | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| int ret = -1; | |
| u8 *agc_state = &state->agc_state; | |
| u8 agc_split; | |
| u16 reg; | |
| u32 upd_demod_gain_period = 0x1000; | |
| s32 frequency_offset = 0; | |
| switch (state->agc_state) { | |
| case 0: | |
| dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); | |
| if (state->version == SOC7090) { | |
| reg = dib7000p_read_word(state, 0x79b) & 0xff00; | |
| dib7000p_write_word(state, 0x79a, upd_demod_gain_period & 0xFFFF); /* lsb */ | |
| dib7000p_write_word(state, 0x79b, reg | (1 << 14) | ((upd_demod_gain_period >> 16) & 0xFF)); | |
| /* enable adc i & q */ | |
| reg = dib7000p_read_word(state, 0x780); | |
| dib7000p_write_word(state, 0x780, (reg | (0x3)) & (~(1 << 7))); | |
| } else { | |
| dib7000p_set_adc_state(state, DIBX000_ADC_ON); | |
| dib7000p_pll_clk_cfg(state); | |
| } | |
| if (dib7000p_set_agc_config(state, BAND_OF_FREQUENCY(ch->frequency / 1000)) != 0) | |
| return -1; | |
| if (demod->ops.tuner_ops.get_frequency) { | |
| u32 frequency_tuner; | |
| demod->ops.tuner_ops.get_frequency(demod, &frequency_tuner); | |
| frequency_offset = (s32)frequency_tuner / 1000 - ch->frequency / 1000; | |
| } | |
| if (dib7000p_set_dds(state, frequency_offset) < 0) | |
| return -1; | |
| ret = 7; | |
| (*agc_state)++; | |
| break; | |
| case 1: | |
| if (state->cfg.agc_control) | |
| state->cfg.agc_control(&state->demod, 1); | |
| dib7000p_write_word(state, 78, 32768); | |
| if (!state->current_agc->perform_agc_softsplit) { | |
| /* we are using the wbd - so slow AGC startup */ | |
| /* force 0 split on WBD and restart AGC */ | |
| dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | (1 << 8)); | |
| (*agc_state)++; | |
| ret = 5; | |
| } else { | |
| /* default AGC startup */ | |
| (*agc_state) = 4; | |
| /* wait AGC rough lock time */ | |
| ret = 7; | |
| } | |
| dib7000p_restart_agc(state); | |
| break; | |
| case 2: /* fast split search path after 5sec */ | |
| dib7000p_write_word(state, 75, state->current_agc->setup | (1 << 4)); /* freeze AGC loop */ | |
| dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (2 << 9) | (0 << 8)); /* fast split search 0.25kHz */ | |
| (*agc_state)++; | |
| ret = 14; | |
| break; | |
| case 3: /* split search ended */ | |
| agc_split = (u8) dib7000p_read_word(state, 396); /* store the split value for the next time */ | |
| dib7000p_write_word(state, 78, dib7000p_read_word(state, 394)); /* set AGC gain start value */ | |
| dib7000p_write_word(state, 75, state->current_agc->setup); /* std AGC loop */ | |
| dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | agc_split); /* standard split search */ | |
| dib7000p_restart_agc(state); | |
| dprintk("SPLIT %p: %hd\n", demod, agc_split); | |
| (*agc_state)++; | |
| ret = 5; | |
| break; | |
| case 4: /* LNA startup */ | |
| ret = 7; | |
| if (dib7000p_update_lna(state)) | |
| ret = 5; | |
| else | |
| (*agc_state)++; | |
| break; | |
| case 5: | |
| if (state->cfg.agc_control) | |
| state->cfg.agc_control(&state->demod, 0); | |
| (*agc_state)++; | |
| break; | |
| default: | |
| break; | |
| } | |
| return ret; | |
| } | |
| static void dib7000p_update_timf(struct dib7000p_state *state) | |
| { | |
| u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428); | |
| state->timf = timf * 160 / (state->current_bandwidth / 50); | |
| dib7000p_write_word(state, 23, (u16) (timf >> 16)); | |
| dib7000p_write_word(state, 24, (u16) (timf & 0xffff)); | |
| dprintk("updated timf_frequency: %d (default: %d)\n", state->timf, state->cfg.bw->timf); | |
| } | |
| static u32 dib7000p_ctrl_timf(struct dvb_frontend *fe, u8 op, u32 timf) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| switch (op) { | |
| case DEMOD_TIMF_SET: | |
| state->timf = timf; | |
| break; | |
| case DEMOD_TIMF_UPDATE: | |
| dib7000p_update_timf(state); | |
| break; | |
| case DEMOD_TIMF_GET: | |
| break; | |
| } | |
| dib7000p_set_bandwidth(state, state->current_bandwidth); | |
| return state->timf; | |
| } | |
| static void dib7000p_set_channel(struct dib7000p_state *state, | |
| struct dtv_frontend_properties *ch, u8 seq) | |
| { | |
| u16 value, est[4]; | |
| dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz)); | |
| /* nfft, guard, qam, alpha */ | |
| value = 0; | |
| switch (ch->transmission_mode) { | |
| case TRANSMISSION_MODE_2K: | |
| value |= (0 << 7); | |
| break; | |
| case TRANSMISSION_MODE_4K: | |
| value |= (2 << 7); | |
| break; | |
| default: | |
| case TRANSMISSION_MODE_8K: | |
| value |= (1 << 7); | |
| break; | |
| } | |
| switch (ch->guard_interval) { | |
| case GUARD_INTERVAL_1_32: | |
| value |= (0 << 5); | |
| break; | |
| case GUARD_INTERVAL_1_16: | |
| value |= (1 << 5); | |
| break; | |
| case GUARD_INTERVAL_1_4: | |
| value |= (3 << 5); | |
| break; | |
| default: | |
| case GUARD_INTERVAL_1_8: | |
| value |= (2 << 5); | |
| break; | |
| } | |
| switch (ch->modulation) { | |
| case QPSK: | |
| value |= (0 << 3); | |
| break; | |
| case QAM_16: | |
| value |= (1 << 3); | |
| break; | |
| default: | |
| case QAM_64: | |
| value |= (2 << 3); | |
| break; | |
| } | |
| switch (HIERARCHY_1) { | |
| case HIERARCHY_2: | |
| value |= 2; | |
| break; | |
| case HIERARCHY_4: | |
| value |= 4; | |
| break; | |
| default: | |
| case HIERARCHY_1: | |
| value |= 1; | |
| break; | |
| } | |
| dib7000p_write_word(state, 0, value); | |
| dib7000p_write_word(state, 5, (seq << 4) | 1); /* do not force tps, search list 0 */ | |
| /* P_dintl_native, P_dintlv_inv, P_hrch, P_code_rate, P_select_hp */ | |
| value = 0; | |
| if (1 != 0) | |
| value |= (1 << 6); | |
| if (ch->hierarchy == 1) | |
| value |= (1 << 4); | |
| if (1 == 1) | |
| value |= 1; | |
| switch ((ch->hierarchy == 0 || 1 == 1) ? ch->code_rate_HP : ch->code_rate_LP) { | |
| case FEC_2_3: | |
| value |= (2 << 1); | |
| break; | |
| case FEC_3_4: | |
| value |= (3 << 1); | |
| break; | |
| case FEC_5_6: | |
| value |= (5 << 1); | |
| break; | |
| case FEC_7_8: | |
| value |= (7 << 1); | |
| break; | |
| default: | |
| case FEC_1_2: | |
| value |= (1 << 1); | |
| break; | |
| } | |
| dib7000p_write_word(state, 208, value); | |
| /* offset loop parameters */ | |
| dib7000p_write_word(state, 26, 0x6680); | |
| dib7000p_write_word(state, 32, 0x0003); | |
| dib7000p_write_word(state, 29, 0x1273); | |
| dib7000p_write_word(state, 33, 0x0005); | |
| /* P_dvsy_sync_wait */ | |
| switch (ch->transmission_mode) { | |
| case TRANSMISSION_MODE_8K: | |
| value = 256; | |
| break; | |
| case TRANSMISSION_MODE_4K: | |
| value = 128; | |
| break; | |
| case TRANSMISSION_MODE_2K: | |
| default: | |
| value = 64; | |
| break; | |
| } | |
| switch (ch->guard_interval) { | |
| case GUARD_INTERVAL_1_16: | |
| value *= 2; | |
| break; | |
| case GUARD_INTERVAL_1_8: | |
| value *= 4; | |
| break; | |
| case GUARD_INTERVAL_1_4: | |
| value *= 8; | |
| break; | |
| default: | |
| case GUARD_INTERVAL_1_32: | |
| value *= 1; | |
| break; | |
| } | |
| if (state->cfg.diversity_delay == 0) | |
| state->div_sync_wait = (value * 3) / 2 + 48; | |
| else | |
| state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; | |
| /* deactive the possibility of diversity reception if extended interleaver */ | |
| state->div_force_off = !1 && ch->transmission_mode != TRANSMISSION_MODE_8K; | |
| dib7000p_set_diversity_in(&state->demod, state->div_state); | |
| /* channel estimation fine configuration */ | |
| switch (ch->modulation) { | |
| case QAM_64: | |
| est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */ | |
| est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */ | |
| est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ | |
| est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */ | |
| break; | |
| case QAM_16: | |
| est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */ | |
| est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */ | |
| est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ | |
| est[3] = 0xfff0; /* P_adp_noise_ext -0.002 */ | |
| break; | |
| default: | |
| est[0] = 0x099a; /* P_adp_regul_cnt 0.3 */ | |
| est[1] = 0xffae; /* P_adp_noise_cnt -0.01 */ | |
| est[2] = 0x0333; /* P_adp_regul_ext 0.1 */ | |
| est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */ | |
| break; | |
| } | |
| for (value = 0; value < 4; value++) | |
| dib7000p_write_word(state, 187 + value, est[value]); | |
| } | |
| static int dib7000p_autosearch_start(struct dvb_frontend *demod) | |
| { | |
| struct dtv_frontend_properties *ch = &demod->dtv_property_cache; | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| struct dtv_frontend_properties schan; | |
| u32 value, factor; | |
| u32 internal = dib7000p_get_internal_freq(state); | |
| schan = *ch; | |
| schan.modulation = QAM_64; | |
| schan.guard_interval = GUARD_INTERVAL_1_32; | |
| schan.transmission_mode = TRANSMISSION_MODE_8K; | |
| schan.code_rate_HP = FEC_2_3; | |
| schan.code_rate_LP = FEC_3_4; | |
| schan.hierarchy = 0; | |
| dib7000p_set_channel(state, &schan, 7); | |
| factor = BANDWIDTH_TO_KHZ(ch->bandwidth_hz); | |
| if (factor >= 5000) { | |
| if (state->version == SOC7090) | |
| factor = 2; | |
| else | |
| factor = 1; | |
| } else | |
| factor = 6; | |
| value = 30 * internal * factor; | |
| dib7000p_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); | |
| dib7000p_write_word(state, 7, (u16) (value & 0xffff)); | |
| value = 100 * internal * factor; | |
| dib7000p_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); | |
| dib7000p_write_word(state, 9, (u16) (value & 0xffff)); | |
| value = 500 * internal * factor; | |
| dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); | |
| dib7000p_write_word(state, 11, (u16) (value & 0xffff)); | |
| value = dib7000p_read_word(state, 0); | |
| dib7000p_write_word(state, 0, (u16) ((1 << 9) | value)); | |
| dib7000p_read_word(state, 1284); | |
| dib7000p_write_word(state, 0, (u16) value); | |
| return 0; | |
| } | |
| static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod) | |
| { | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| u16 irq_pending = dib7000p_read_word(state, 1284); | |
| if (irq_pending & 0x1) | |
| return 1; | |
| if (irq_pending & 0x2) | |
| return 2; | |
| return 0; | |
| } | |
| static void dib7000p_spur_protect(struct dib7000p_state *state, u32 rf_khz, u32 bw) | |
| { | |
| static s16 notch[] = { 16143, 14402, 12238, 9713, 6902, 3888, 759, -2392 }; | |
| static u8 sine[] = { 0, 2, 3, 5, 6, 8, 9, 11, 13, 14, 16, 17, 19, 20, 22, | |
| 24, 25, 27, 28, 30, 31, 33, 34, 36, 38, 39, 41, 42, 44, 45, 47, 48, 50, 51, | |
| 53, 55, 56, 58, 59, 61, 62, 64, 65, 67, 68, 70, 71, 73, 74, 76, 77, 79, 80, | |
| 82, 83, 85, 86, 88, 89, 91, 92, 94, 95, 97, 98, 99, 101, 102, 104, 105, | |
| 107, 108, 109, 111, 112, 114, 115, 117, 118, 119, 121, 122, 123, 125, 126, | |
| 128, 129, 130, 132, 133, 134, 136, 137, 138, 140, 141, 142, 144, 145, 146, | |
| 147, 149, 150, 151, 152, 154, 155, 156, 157, 159, 160, 161, 162, 164, 165, | |
| 166, 167, 168, 170, 171, 172, 173, 174, 175, 177, 178, 179, 180, 181, 182, | |
| 183, 184, 185, 186, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, | |
| 199, 200, 201, 202, 203, 204, 205, 206, 207, 207, 208, 209, 210, 211, 212, | |
| 213, 214, 215, 215, 216, 217, 218, 219, 220, 220, 221, 222, 223, 224, 224, | |
| 225, 226, 227, 227, 228, 229, 229, 230, 231, 231, 232, 233, 233, 234, 235, | |
| 235, 236, 237, 237, 238, 238, 239, 239, 240, 241, 241, 242, 242, 243, 243, | |
| 244, 244, 245, 245, 245, 246, 246, 247, 247, 248, 248, 248, 249, 249, 249, | |
| 250, 250, 250, 251, 251, 251, 252, 252, 252, 252, 253, 253, 253, 253, 254, | |
| 254, 254, 254, 254, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, | |
| 255, 255, 255, 255, 255, 255 | |
| }; | |
| u32 xtal = state->cfg.bw->xtal_hz / 1000; | |
| int f_rel = DIV_ROUND_CLOSEST(rf_khz, xtal) * xtal - rf_khz; | |
| int k; | |
| int coef_re[8], coef_im[8]; | |
| int bw_khz = bw; | |
| u32 pha; | |
| dprintk("relative position of the Spur: %dk (RF: %dk, XTAL: %dk)\n", f_rel, rf_khz, xtal); | |
| if (f_rel < -bw_khz / 2 || f_rel > bw_khz / 2) | |
| return; | |
| bw_khz /= 100; | |
| dib7000p_write_word(state, 142, 0x0610); | |
| for (k = 0; k < 8; k++) { | |
| pha = ((f_rel * (k + 1) * 112 * 80 / bw_khz) / 1000) & 0x3ff; | |
| if (pha == 0) { | |
| coef_re[k] = 256; | |
| coef_im[k] = 0; | |
| } else if (pha < 256) { | |
| coef_re[k] = sine[256 - (pha & 0xff)]; | |
| coef_im[k] = sine[pha & 0xff]; | |
| } else if (pha == 256) { | |
| coef_re[k] = 0; | |
| coef_im[k] = 256; | |
| } else if (pha < 512) { | |
| coef_re[k] = -sine[pha & 0xff]; | |
| coef_im[k] = sine[256 - (pha & 0xff)]; | |
| } else if (pha == 512) { | |
| coef_re[k] = -256; | |
| coef_im[k] = 0; | |
| } else if (pha < 768) { | |
| coef_re[k] = -sine[256 - (pha & 0xff)]; | |
| coef_im[k] = -sine[pha & 0xff]; | |
| } else if (pha == 768) { | |
| coef_re[k] = 0; | |
| coef_im[k] = -256; | |
| } else { | |
| coef_re[k] = sine[pha & 0xff]; | |
| coef_im[k] = -sine[256 - (pha & 0xff)]; | |
| } | |
| coef_re[k] *= notch[k]; | |
| coef_re[k] += (1 << 14); | |
| if (coef_re[k] >= (1 << 24)) | |
| coef_re[k] = (1 << 24) - 1; | |
| coef_re[k] /= (1 << 15); | |
| coef_im[k] *= notch[k]; | |
| coef_im[k] += (1 << 14); | |
| if (coef_im[k] >= (1 << 24)) | |
| coef_im[k] = (1 << 24) - 1; | |
| coef_im[k] /= (1 << 15); | |
| dprintk("PALF COEF: %d re: %d im: %d\n", k, coef_re[k], coef_im[k]); | |
| dib7000p_write_word(state, 143, (0 << 14) | (k << 10) | (coef_re[k] & 0x3ff)); | |
| dib7000p_write_word(state, 144, coef_im[k] & 0x3ff); | |
| dib7000p_write_word(state, 143, (1 << 14) | (k << 10) | (coef_re[k] & 0x3ff)); | |
| } | |
| dib7000p_write_word(state, 143, 0); | |
| } | |
| static int dib7000p_tune(struct dvb_frontend *demod) | |
| { | |
| struct dtv_frontend_properties *ch = &demod->dtv_property_cache; | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| u16 tmp = 0; | |
| if (ch != NULL) | |
| dib7000p_set_channel(state, ch, 0); | |
| else | |
| return -EINVAL; | |
| // restart demod | |
| dib7000p_write_word(state, 770, 0x4000); | |
| dib7000p_write_word(state, 770, 0x0000); | |
| msleep(45); | |
| /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */ | |
| tmp = (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3); | |
| if (state->sfn_workaround_active) { | |
| dprintk("SFN workaround is active\n"); | |
| tmp |= (1 << 9); | |
| dib7000p_write_word(state, 166, 0x4000); | |
| } else { | |
| dib7000p_write_word(state, 166, 0x0000); | |
| } | |
| dib7000p_write_word(state, 29, tmp); | |
| // never achieved a lock with that bandwidth so far - wait for osc-freq to update | |
| if (state->timf == 0) | |
| msleep(200); | |
| /* offset loop parameters */ | |
| /* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */ | |
| tmp = (6 << 8) | 0x80; | |
| switch (ch->transmission_mode) { | |
| case TRANSMISSION_MODE_2K: | |
| tmp |= (2 << 12); | |
| break; | |
| case TRANSMISSION_MODE_4K: | |
| tmp |= (3 << 12); | |
| break; | |
| default: | |
| case TRANSMISSION_MODE_8K: | |
| tmp |= (4 << 12); | |
| break; | |
| } | |
| dib7000p_write_word(state, 26, tmp); /* timf_a(6xxx) */ | |
| /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */ | |
| tmp = (0 << 4); | |
| switch (ch->transmission_mode) { | |
| case TRANSMISSION_MODE_2K: | |
| tmp |= 0x6; | |
| break; | |
| case TRANSMISSION_MODE_4K: | |
| tmp |= 0x7; | |
| break; | |
| default: | |
| case TRANSMISSION_MODE_8K: | |
| tmp |= 0x8; | |
| break; | |
| } | |
| dib7000p_write_word(state, 32, tmp); | |
| /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */ | |
| tmp = (0 << 4); | |
| switch (ch->transmission_mode) { | |
| case TRANSMISSION_MODE_2K: | |
| tmp |= 0x6; | |
| break; | |
| case TRANSMISSION_MODE_4K: | |
| tmp |= 0x7; | |
| break; | |
| default: | |
| case TRANSMISSION_MODE_8K: | |
| tmp |= 0x8; | |
| break; | |
| } | |
| dib7000p_write_word(state, 33, tmp); | |
| tmp = dib7000p_read_word(state, 509); | |
| if (!((tmp >> 6) & 0x1)) { | |
| /* restart the fec */ | |
| tmp = dib7000p_read_word(state, 771); | |
| dib7000p_write_word(state, 771, tmp | (1 << 1)); | |
| dib7000p_write_word(state, 771, tmp); | |
| msleep(40); | |
| tmp = dib7000p_read_word(state, 509); | |
| } | |
| // we achieved a lock - it's time to update the osc freq | |
| if ((tmp >> 6) & 0x1) { | |
| dib7000p_update_timf(state); | |
| /* P_timf_alpha += 2 */ | |
| tmp = dib7000p_read_word(state, 26); | |
| dib7000p_write_word(state, 26, (tmp & ~(0xf << 12)) | ((((tmp >> 12) & 0xf) + 5) << 12)); | |
| } | |
| if (state->cfg.spur_protect) | |
| dib7000p_spur_protect(state, ch->frequency / 1000, BANDWIDTH_TO_KHZ(ch->bandwidth_hz)); | |
| dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->bandwidth_hz)); | |
| dib7000p_reset_stats(demod); | |
| return 0; | |
| } | |
| static int dib7000p_wakeup(struct dvb_frontend *demod) | |
| { | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); | |
| dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON); | |
| if (state->version == SOC7090) | |
| dib7000p_sad_calib(state); | |
| return 0; | |
| } | |
| static int dib7000p_sleep(struct dvb_frontend *demod) | |
| { | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| if (state->version == SOC7090) | |
| return dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); | |
| return dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); | |
| } | |
| static int dib7000p_identify(struct dib7000p_state *st) | |
| { | |
| u16 value; | |
| dprintk("checking demod on I2C address: %d (%x)\n", st->i2c_addr, st->i2c_addr); | |
| if ((value = dib7000p_read_word(st, 768)) != 0x01b3) { | |
| dprintk("wrong Vendor ID (read=0x%x)\n", value); | |
| return -EREMOTEIO; | |
| } | |
| if ((value = dib7000p_read_word(st, 769)) != 0x4000) { | |
| dprintk("wrong Device ID (%x)\n", value); | |
| return -EREMOTEIO; | |
| } | |
| return 0; | |
| } | |
| static int dib7000p_get_frontend(struct dvb_frontend *fe, | |
| struct dtv_frontend_properties *fep) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 tps = dib7000p_read_word(state, 463); | |
| fep->inversion = INVERSION_AUTO; | |
| fep->bandwidth_hz = BANDWIDTH_TO_HZ(state->current_bandwidth); | |
| switch ((tps >> 8) & 0x3) { | |
| case 0: | |
| fep->transmission_mode = TRANSMISSION_MODE_2K; | |
| break; | |
| case 1: | |
| fep->transmission_mode = TRANSMISSION_MODE_8K; | |
| break; | |
| /* case 2: fep->transmission_mode = TRANSMISSION_MODE_4K; break; */ | |
| } | |
| switch (tps & 0x3) { | |
| case 0: | |
| fep->guard_interval = GUARD_INTERVAL_1_32; | |
| break; | |
| case 1: | |
| fep->guard_interval = GUARD_INTERVAL_1_16; | |
| break; | |
| case 2: | |
| fep->guard_interval = GUARD_INTERVAL_1_8; | |
| break; | |
| case 3: | |
| fep->guard_interval = GUARD_INTERVAL_1_4; | |
| break; | |
| } | |
| switch ((tps >> 14) & 0x3) { | |
| case 0: | |
| fep->modulation = QPSK; | |
| break; | |
| case 1: | |
| fep->modulation = QAM_16; | |
| break; | |
| case 2: | |
| default: | |
| fep->modulation = QAM_64; | |
| break; | |
| } | |
| /* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */ | |
| /* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */ | |
| fep->hierarchy = HIERARCHY_NONE; | |
| switch ((tps >> 5) & 0x7) { | |
| case 1: | |
| fep->code_rate_HP = FEC_1_2; | |
| break; | |
| case 2: | |
| fep->code_rate_HP = FEC_2_3; | |
| break; | |
| case 3: | |
| fep->code_rate_HP = FEC_3_4; | |
| break; | |
| case 5: | |
| fep->code_rate_HP = FEC_5_6; | |
| break; | |
| case 7: | |
| default: | |
| fep->code_rate_HP = FEC_7_8; | |
| break; | |
| } | |
| switch ((tps >> 2) & 0x7) { | |
| case 1: | |
| fep->code_rate_LP = FEC_1_2; | |
| break; | |
| case 2: | |
| fep->code_rate_LP = FEC_2_3; | |
| break; | |
| case 3: | |
| fep->code_rate_LP = FEC_3_4; | |
| break; | |
| case 5: | |
| fep->code_rate_LP = FEC_5_6; | |
| break; | |
| case 7: | |
| default: | |
| fep->code_rate_LP = FEC_7_8; | |
| break; | |
| } | |
| /* native interleaver: (dib7000p_read_word(state, 464) >> 5) & 0x1 */ | |
| return 0; | |
| } | |
| static int dib7000p_set_frontend(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *fep = &fe->dtv_property_cache; | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| int time, ret; | |
| if (state->version == SOC7090) | |
| dib7090_set_diversity_in(fe, 0); | |
| else | |
| dib7000p_set_output_mode(state, OUTMODE_HIGH_Z); | |
| /* maybe the parameter has been changed */ | |
| state->sfn_workaround_active = buggy_sfn_workaround; | |
| if (fe->ops.tuner_ops.set_params) | |
| fe->ops.tuner_ops.set_params(fe); | |
| /* start up the AGC */ | |
| state->agc_state = 0; | |
| do { | |
| time = dib7000p_agc_startup(fe); | |
| if (time != -1) | |
| msleep(time); | |
| } while (time != -1); | |
| if (fep->transmission_mode == TRANSMISSION_MODE_AUTO || | |
| fep->guard_interval == GUARD_INTERVAL_AUTO || fep->modulation == QAM_AUTO || fep->code_rate_HP == FEC_AUTO) { | |
| int i = 800, found; | |
| dib7000p_autosearch_start(fe); | |
| do { | |
| msleep(1); | |
| found = dib7000p_autosearch_is_irq(fe); | |
| } while (found == 0 && i--); | |
| dprintk("autosearch returns: %d\n", found); | |
| if (found == 0 || found == 1) | |
| return 0; | |
| dib7000p_get_frontend(fe, fep); | |
| } | |
| ret = dib7000p_tune(fe); | |
| /* make this a config parameter */ | |
| if (state->version == SOC7090) { | |
| dib7090_set_output_mode(fe, state->cfg.output_mode); | |
| if (state->cfg.enMpegOutput == 0) { | |
| dib7090_setDibTxMux(state, MPEG_ON_DIBTX); | |
| dib7090_setHostBusMux(state, DIBTX_ON_HOSTBUS); | |
| } | |
| } else | |
| dib7000p_set_output_mode(state, state->cfg.output_mode); | |
| return ret; | |
| } | |
| static int dib7000p_get_stats(struct dvb_frontend *fe, enum fe_status stat); | |
| static int dib7000p_read_status(struct dvb_frontend *fe, enum fe_status *stat) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 lock = dib7000p_read_word(state, 509); | |
| *stat = 0; | |
| if (lock & 0x8000) | |
| *stat |= FE_HAS_SIGNAL; | |
| if (lock & 0x3000) | |
| *stat |= FE_HAS_CARRIER; | |
| if (lock & 0x0100) | |
| *stat |= FE_HAS_VITERBI; | |
| if (lock & 0x0010) | |
| *stat |= FE_HAS_SYNC; | |
| if ((lock & 0x0038) == 0x38) | |
| *stat |= FE_HAS_LOCK; | |
| dib7000p_get_stats(fe, *stat); | |
| return 0; | |
| } | |
| static int dib7000p_read_ber(struct dvb_frontend *fe, u32 * ber) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| *ber = (dib7000p_read_word(state, 500) << 16) | dib7000p_read_word(state, 501); | |
| return 0; | |
| } | |
| static int dib7000p_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| *unc = dib7000p_read_word(state, 506); | |
| return 0; | |
| } | |
| static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 * strength) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 val = dib7000p_read_word(state, 394); | |
| *strength = 65535 - val; | |
| return 0; | |
| } | |
| static u32 dib7000p_get_snr(struct dvb_frontend *fe) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 val; | |
| s32 signal_mant, signal_exp, noise_mant, noise_exp; | |
| u32 result = 0; | |
| val = dib7000p_read_word(state, 479); | |
| noise_mant = (val >> 4) & 0xff; | |
| noise_exp = ((val & 0xf) << 2); | |
| val = dib7000p_read_word(state, 480); | |
| noise_exp += ((val >> 14) & 0x3); | |
| if ((noise_exp & 0x20) != 0) | |
| noise_exp -= 0x40; | |
| signal_mant = (val >> 6) & 0xFF; | |
| signal_exp = (val & 0x3F); | |
| if ((signal_exp & 0x20) != 0) | |
| signal_exp -= 0x40; | |
| if (signal_mant != 0) | |
| result = intlog10(2) * 10 * signal_exp + 10 * intlog10(signal_mant); | |
| else | |
| result = intlog10(2) * 10 * signal_exp - 100; | |
| if (noise_mant != 0) | |
| result -= intlog10(2) * 10 * noise_exp + 10 * intlog10(noise_mant); | |
| else | |
| result -= intlog10(2) * 10 * noise_exp - 100; | |
| return result; | |
| } | |
| static int dib7000p_read_snr(struct dvb_frontend *fe, u16 *snr) | |
| { | |
| u32 result; | |
| result = dib7000p_get_snr(fe); | |
| *snr = result / ((1 << 24) / 10); | |
| return 0; | |
| } | |
| static void dib7000p_reset_stats(struct dvb_frontend *demod) | |
| { | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| struct dtv_frontend_properties *c = &demod->dtv_property_cache; | |
| u32 ucb; | |
| memset(&c->strength, 0, sizeof(c->strength)); | |
| memset(&c->cnr, 0, sizeof(c->cnr)); | |
| memset(&c->post_bit_error, 0, sizeof(c->post_bit_error)); | |
| memset(&c->post_bit_count, 0, sizeof(c->post_bit_count)); | |
| memset(&c->block_error, 0, sizeof(c->block_error)); | |
| c->strength.len = 1; | |
| c->cnr.len = 1; | |
| c->block_error.len = 1; | |
| c->block_count.len = 1; | |
| c->post_bit_error.len = 1; | |
| c->post_bit_count.len = 1; | |
| c->strength.stat[0].scale = FE_SCALE_DECIBEL; | |
| c->strength.stat[0].uvalue = 0; | |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| dib7000p_read_unc_blocks(demod, &ucb); | |
| state->old_ucb = ucb; | |
| state->ber_jiffies_stats = 0; | |
| state->per_jiffies_stats = 0; | |
| } | |
| struct linear_segments { | |
| unsigned x; | |
| signed y; | |
| }; | |
| /* | |
| * Table to estimate signal strength in dBm. | |
| * This table should be empirically determinated by measuring the signal | |
| * strength generated by a RF generator directly connected into | |
| * a device. | |
| * This table was determinated by measuring the signal strength generated | |
| * by a DTA-2111 RF generator directly connected into a dib7000p device | |
| * (a Hauppauge Nova-TD stick), using a good quality 3 meters length | |
| * RC6 cable and good RC6 connectors, connected directly to antenna 1. | |
| * As the minimum output power of DTA-2111 is -31dBm, a 16 dBm attenuator | |
| * were used, for the lower power values. | |
| * The real value can actually be on other devices, or even at the | |
| * second antena input, depending on several factors, like if LNA | |
| * is enabled or not, if diversity is enabled, type of connectors, etc. | |
| * Yet, it is better to use this measure in dB than a random non-linear | |
| * percentage value, especially for antenna adjustments. | |
| * On my tests, the precision of the measure using this table is about | |
| * 0.5 dB, with sounds reasonable enough to adjust antennas. | |
| */ | |
| #define DB_OFFSET 131000 | |
| static struct linear_segments strength_to_db_table[] = { | |
| { 63630, DB_OFFSET - 20500}, | |
| { 62273, DB_OFFSET - 21000}, | |
| { 60162, DB_OFFSET - 22000}, | |
| { 58730, DB_OFFSET - 23000}, | |
| { 58294, DB_OFFSET - 24000}, | |
| { 57778, DB_OFFSET - 25000}, | |
| { 57320, DB_OFFSET - 26000}, | |
| { 56779, DB_OFFSET - 27000}, | |
| { 56293, DB_OFFSET - 28000}, | |
| { 55724, DB_OFFSET - 29000}, | |
| { 55145, DB_OFFSET - 30000}, | |
| { 54680, DB_OFFSET - 31000}, | |
| { 54293, DB_OFFSET - 32000}, | |
| { 53813, DB_OFFSET - 33000}, | |
| { 53427, DB_OFFSET - 34000}, | |
| { 52981, DB_OFFSET - 35000}, | |
| { 52636, DB_OFFSET - 36000}, | |
| { 52014, DB_OFFSET - 37000}, | |
| { 51674, DB_OFFSET - 38000}, | |
| { 50692, DB_OFFSET - 39000}, | |
| { 49824, DB_OFFSET - 40000}, | |
| { 49052, DB_OFFSET - 41000}, | |
| { 48436, DB_OFFSET - 42000}, | |
| { 47836, DB_OFFSET - 43000}, | |
| { 47368, DB_OFFSET - 44000}, | |
| { 46468, DB_OFFSET - 45000}, | |
| { 45597, DB_OFFSET - 46000}, | |
| { 44586, DB_OFFSET - 47000}, | |
| { 43667, DB_OFFSET - 48000}, | |
| { 42673, DB_OFFSET - 49000}, | |
| { 41816, DB_OFFSET - 50000}, | |
| { 40876, DB_OFFSET - 51000}, | |
| { 0, 0}, | |
| }; | |
| static u32 interpolate_value(u32 value, struct linear_segments *segments, | |
| unsigned len) | |
| { | |
| u64 tmp64; | |
| u32 dx; | |
| s32 dy; | |
| int i, ret; | |
| if (value >= segments[0].x) | |
| return segments[0].y; | |
| if (value < segments[len-1].x) | |
| return segments[len-1].y; | |
| for (i = 1; i < len - 1; i++) { | |
| /* If value is identical, no need to interpolate */ | |
| if (value == segments[i].x) | |
| return segments[i].y; | |
| if (value > segments[i].x) | |
| break; | |
| } | |
| /* Linear interpolation between the two (x,y) points */ | |
| dy = segments[i - 1].y - segments[i].y; | |
| dx = segments[i - 1].x - segments[i].x; | |
| tmp64 = value - segments[i].x; | |
| tmp64 *= dy; | |
| do_div(tmp64, dx); | |
| ret = segments[i].y + tmp64; | |
| return ret; | |
| } | |
| /* FIXME: may require changes - this one was borrowed from dib8000 */ | |
| static u32 dib7000p_get_time_us(struct dvb_frontend *demod) | |
| { | |
| struct dtv_frontend_properties *c = &demod->dtv_property_cache; | |
| u64 time_us, tmp64; | |
| u32 tmp, denom; | |
| int guard, rate_num, rate_denum = 1, bits_per_symbol; | |
| int interleaving = 0, fft_div; | |
| switch (c->guard_interval) { | |
| case GUARD_INTERVAL_1_4: | |
| guard = 4; | |
| break; | |
| case GUARD_INTERVAL_1_8: | |
| guard = 8; | |
| break; | |
| case GUARD_INTERVAL_1_16: | |
| guard = 16; | |
| break; | |
| default: | |
| case GUARD_INTERVAL_1_32: | |
| guard = 32; | |
| break; | |
| } | |
| switch (c->transmission_mode) { | |
| case TRANSMISSION_MODE_2K: | |
| fft_div = 4; | |
| break; | |
| case TRANSMISSION_MODE_4K: | |
| fft_div = 2; | |
| break; | |
| default: | |
| case TRANSMISSION_MODE_8K: | |
| fft_div = 1; | |
| break; | |
| } | |
| switch (c->modulation) { | |
| case DQPSK: | |
| case QPSK: | |
| bits_per_symbol = 2; | |
| break; | |
| case QAM_16: | |
| bits_per_symbol = 4; | |
| break; | |
| default: | |
| case QAM_64: | |
| bits_per_symbol = 6; | |
| break; | |
| } | |
| switch ((c->hierarchy == 0 || 1 == 1) ? c->code_rate_HP : c->code_rate_LP) { | |
| case FEC_1_2: | |
| rate_num = 1; | |
| rate_denum = 2; | |
| break; | |
| case FEC_2_3: | |
| rate_num = 2; | |
| rate_denum = 3; | |
| break; | |
| case FEC_3_4: | |
| rate_num = 3; | |
| rate_denum = 4; | |
| break; | |
| case FEC_5_6: | |
| rate_num = 5; | |
| rate_denum = 6; | |
| break; | |
| default: | |
| case FEC_7_8: | |
| rate_num = 7; | |
| rate_denum = 8; | |
| break; | |
| } | |
| interleaving = interleaving; | |
| denom = bits_per_symbol * rate_num * fft_div * 384; | |
| /* If calculus gets wrong, wait for 1s for the next stats */ | |
| if (!denom) | |
| return 0; | |
| /* Estimate the period for the total bit rate */ | |
| time_us = rate_denum * (1008 * 1562500L); | |
| tmp64 = time_us; | |
| do_div(tmp64, guard); | |
| time_us = time_us + tmp64; | |
| time_us += denom / 2; | |
| do_div(time_us, denom); | |
| tmp = 1008 * 96 * interleaving; | |
| time_us += tmp + tmp / guard; | |
| return time_us; | |
| } | |
| static int dib7000p_get_stats(struct dvb_frontend *demod, enum fe_status stat) | |
| { | |
| struct dib7000p_state *state = demod->demodulator_priv; | |
| struct dtv_frontend_properties *c = &demod->dtv_property_cache; | |
| int show_per_stats = 0; | |
| u32 time_us = 0, val, snr; | |
| u64 blocks, ucb; | |
| s32 db; | |
| u16 strength; | |
| /* Get Signal strength */ | |
| dib7000p_read_signal_strength(demod, &strength); | |
| val = strength; | |
| db = interpolate_value(val, | |
| strength_to_db_table, | |
| ARRAY_SIZE(strength_to_db_table)) - DB_OFFSET; | |
| c->strength.stat[0].svalue = db; | |
| /* UCB/BER/CNR measures require lock */ | |
| if (!(stat & FE_HAS_LOCK)) { | |
| c->cnr.len = 1; | |
| c->block_count.len = 1; | |
| c->block_error.len = 1; | |
| c->post_bit_error.len = 1; | |
| c->post_bit_count.len = 1; | |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| return 0; | |
| } | |
| /* Check if time for stats was elapsed */ | |
| if (time_after(jiffies, state->per_jiffies_stats)) { | |
| state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000); | |
| /* Get SNR */ | |
| snr = dib7000p_get_snr(demod); | |
| if (snr) | |
| snr = (1000L * snr) >> 24; | |
| else | |
| snr = 0; | |
| c->cnr.stat[0].svalue = snr; | |
| c->cnr.stat[0].scale = FE_SCALE_DECIBEL; | |
| /* Get UCB measures */ | |
| dib7000p_read_unc_blocks(demod, &val); | |
| ucb = val - state->old_ucb; | |
| if (val < state->old_ucb) | |
| ucb += 0x100000000LL; | |
| c->block_error.stat[0].scale = FE_SCALE_COUNTER; | |
| c->block_error.stat[0].uvalue = ucb; | |
| /* Estimate the number of packets based on bitrate */ | |
| if (!time_us) | |
| time_us = dib7000p_get_time_us(demod); | |
| if (time_us) { | |
| blocks = 1250000ULL * 1000000ULL; | |
| do_div(blocks, time_us * 8 * 204); | |
| c->block_count.stat[0].scale = FE_SCALE_COUNTER; | |
| c->block_count.stat[0].uvalue += blocks; | |
| } | |
| show_per_stats = 1; | |
| } | |
| /* Get post-BER measures */ | |
| if (time_after(jiffies, state->ber_jiffies_stats)) { | |
| time_us = dib7000p_get_time_us(demod); | |
| state->ber_jiffies_stats = jiffies + msecs_to_jiffies((time_us + 500) / 1000); | |
| dprintk("Next all layers stats available in %u us.\n", time_us); | |
| dib7000p_read_ber(demod, &val); | |
| c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; | |
| c->post_bit_error.stat[0].uvalue += val; | |
| c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; | |
| c->post_bit_count.stat[0].uvalue += 100000000; | |
| } | |
| /* Get PER measures */ | |
| if (show_per_stats) { | |
| dib7000p_read_unc_blocks(demod, &val); | |
| c->block_error.stat[0].scale = FE_SCALE_COUNTER; | |
| c->block_error.stat[0].uvalue += val; | |
| time_us = dib7000p_get_time_us(demod); | |
| if (time_us) { | |
| blocks = 1250000ULL * 1000000ULL; | |
| do_div(blocks, time_us * 8 * 204); | |
| c->block_count.stat[0].scale = FE_SCALE_COUNTER; | |
| c->block_count.stat[0].uvalue += blocks; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int dib7000p_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune) | |
| { | |
| tune->min_delay_ms = 1000; | |
| return 0; | |
| } | |
| static void dib7000p_release(struct dvb_frontend *demod) | |
| { | |
| struct dib7000p_state *st = demod->demodulator_priv; | |
| dibx000_exit_i2c_master(&st->i2c_master); | |
| i2c_del_adapter(&st->dib7090_tuner_adap); | |
| kfree(st); | |
| } | |
| static int dib7000pc_detection(struct i2c_adapter *i2c_adap) | |
| { | |
| u8 *tx, *rx; | |
| struct i2c_msg msg[2] = { | |
| {.addr = 18 >> 1, .flags = 0, .len = 2}, | |
| {.addr = 18 >> 1, .flags = I2C_M_RD, .len = 2}, | |
| }; | |
| int ret = 0; | |
| tx = kzalloc(2*sizeof(u8), GFP_KERNEL); | |
| if (!tx) | |
| return -ENOMEM; | |
| rx = kzalloc(2*sizeof(u8), GFP_KERNEL); | |
| if (!rx) { | |
| ret = -ENOMEM; | |
| goto rx_memory_error; | |
| } | |
| msg[0].buf = tx; | |
| msg[1].buf = rx; | |
| tx[0] = 0x03; | |
| tx[1] = 0x00; | |
| if (i2c_transfer(i2c_adap, msg, 2) == 2) | |
| if (rx[0] == 0x01 && rx[1] == 0xb3) { | |
| dprintk("-D- DiB7000PC detected\n"); | |
| return 1; | |
| } | |
| msg[0].addr = msg[1].addr = 0x40; | |
| if (i2c_transfer(i2c_adap, msg, 2) == 2) | |
| if (rx[0] == 0x01 && rx[1] == 0xb3) { | |
| dprintk("-D- DiB7000PC detected\n"); | |
| return 1; | |
| } | |
| dprintk("-D- DiB7000PC not detected\n"); | |
| kfree(rx); | |
| rx_memory_error: | |
| kfree(tx); | |
| return ret; | |
| } | |
| static struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating) | |
| { | |
| struct dib7000p_state *st = demod->demodulator_priv; | |
| return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); | |
| } | |
| static int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 val = dib7000p_read_word(state, 235) & 0xffef; | |
| val |= (onoff & 0x1) << 4; | |
| dprintk("PID filter enabled %d\n", onoff); | |
| return dib7000p_write_word(state, 235, val); | |
| } | |
| static int dib7000p_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| dprintk("PID filter: index %x, PID %d, OnOff %d\n", id, pid, onoff); | |
| return dib7000p_write_word(state, 241 + id, onoff ? (1 << 13) | pid : 0); | |
| } | |
| static int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]) | |
| { | |
| struct dib7000p_state *dpst; | |
| int k = 0; | |
| u8 new_addr = 0; | |
| dpst = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL); | |
| if (!dpst) | |
| return -ENOMEM; | |
| dpst->i2c_adap = i2c; | |
| mutex_init(&dpst->i2c_buffer_lock); | |
| for (k = no_of_demods - 1; k >= 0; k--) { | |
| dpst->cfg = cfg[k]; | |
| /* designated i2c address */ | |
| if (cfg[k].default_i2c_addr != 0) | |
| new_addr = cfg[k].default_i2c_addr + (k << 1); | |
| else | |
| new_addr = (0x40 + k) << 1; | |
| dpst->i2c_addr = new_addr; | |
| dib7000p_write_word(dpst, 1287, 0x0003); /* sram lead in, rdy */ | |
| if (dib7000p_identify(dpst) != 0) { | |
| dpst->i2c_addr = default_addr; | |
| dib7000p_write_word(dpst, 1287, 0x0003); /* sram lead in, rdy */ | |
| if (dib7000p_identify(dpst) != 0) { | |
| dprintk("DiB7000P #%d: not identified\n", k); | |
| kfree(dpst); | |
| return -EIO; | |
| } | |
| } | |
| /* start diversity to pull_down div_str - just for i2c-enumeration */ | |
| dib7000p_set_output_mode(dpst, OUTMODE_DIVERSITY); | |
| /* set new i2c address and force divstart */ | |
| dib7000p_write_word(dpst, 1285, (new_addr << 2) | 0x2); | |
| dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr); | |
| } | |
| for (k = 0; k < no_of_demods; k++) { | |
| dpst->cfg = cfg[k]; | |
| if (cfg[k].default_i2c_addr != 0) | |
| dpst->i2c_addr = (cfg[k].default_i2c_addr + k) << 1; | |
| else | |
| dpst->i2c_addr = (0x40 + k) << 1; | |
| // unforce divstr | |
| dib7000p_write_word(dpst, 1285, dpst->i2c_addr << 2); | |
| /* deactivate div - it was just for i2c-enumeration */ | |
| dib7000p_set_output_mode(dpst, OUTMODE_HIGH_Z); | |
| } | |
| kfree(dpst); | |
| return 0; | |
| } | |
| static const s32 lut_1000ln_mant[] = { | |
| 6908, 6956, 7003, 7047, 7090, 7131, 7170, 7208, 7244, 7279, 7313, 7346, 7377, 7408, 7438, 7467, 7495, 7523, 7549, 7575, 7600 | |
| }; | |
| static s32 dib7000p_get_adc_power(struct dvb_frontend *fe) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u32 tmp_val = 0, exp = 0, mant = 0; | |
| s32 pow_i; | |
| u16 buf[2]; | |
| u8 ix = 0; | |
| buf[0] = dib7000p_read_word(state, 0x184); | |
| buf[1] = dib7000p_read_word(state, 0x185); | |
| pow_i = (buf[0] << 16) | buf[1]; | |
| dprintk("raw pow_i = %d\n", pow_i); | |
| tmp_val = pow_i; | |
| while (tmp_val >>= 1) | |
| exp++; | |
| mant = (pow_i * 1000 / (1 << exp)); | |
| dprintk(" mant = %d exp = %d\n", mant / 1000, exp); | |
| ix = (u8) ((mant - 1000) / 100); /* index of the LUT */ | |
| dprintk(" ix = %d\n", ix); | |
| pow_i = (lut_1000ln_mant[ix] + 693 * (exp - 20) - 6908); | |
| pow_i = (pow_i << 8) / 1000; | |
| dprintk(" pow_i = %d\n", pow_i); | |
| return pow_i; | |
| } | |
| static int map_addr_to_serpar_number(struct i2c_msg *msg) | |
| { | |
| if ((msg->buf[0] <= 15)) | |
| msg->buf[0] -= 1; | |
| else if (msg->buf[0] == 17) | |
| msg->buf[0] = 15; | |
| else if (msg->buf[0] == 16) | |
| msg->buf[0] = 17; | |
| else if (msg->buf[0] == 19) | |
| msg->buf[0] = 16; | |
| else if (msg->buf[0] >= 21 && msg->buf[0] <= 25) | |
| msg->buf[0] -= 3; | |
| else if (msg->buf[0] == 28) | |
| msg->buf[0] = 23; | |
| else | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int w7090p_tuner_write_serpar(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) | |
| { | |
| struct dib7000p_state *state = i2c_get_adapdata(i2c_adap); | |
| u8 n_overflow = 1; | |
| u16 i = 1000; | |
| u16 serpar_num = msg[0].buf[0]; | |
| while (n_overflow == 1 && i) { | |
| n_overflow = (dib7000p_read_word(state, 1984) >> 1) & 0x1; | |
| i--; | |
| if (i == 0) | |
| dprintk("Tuner ITF: write busy (overflow)\n"); | |
| } | |
| dib7000p_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f)); | |
| dib7000p_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]); | |
| return num; | |
| } | |
| static int w7090p_tuner_read_serpar(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) | |
| { | |
| struct dib7000p_state *state = i2c_get_adapdata(i2c_adap); | |
| u8 n_overflow = 1, n_empty = 1; | |
| u16 i = 1000; | |
| u16 serpar_num = msg[0].buf[0]; | |
| u16 read_word; | |
| while (n_overflow == 1 && i) { | |
| n_overflow = (dib7000p_read_word(state, 1984) >> 1) & 0x1; | |
| i--; | |
| if (i == 0) | |
| dprintk("TunerITF: read busy (overflow)\n"); | |
| } | |
| dib7000p_write_word(state, 1985, (0 << 6) | (serpar_num & 0x3f)); | |
| i = 1000; | |
| while (n_empty == 1 && i) { | |
| n_empty = dib7000p_read_word(state, 1984) & 0x1; | |
| i--; | |
| if (i == 0) | |
| dprintk("TunerITF: read busy (empty)\n"); | |
| } | |
| read_word = dib7000p_read_word(state, 1987); | |
| msg[1].buf[0] = (read_word >> 8) & 0xff; | |
| msg[1].buf[1] = (read_word) & 0xff; | |
| return num; | |
| } | |
| static int w7090p_tuner_rw_serpar(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) | |
| { | |
| if (map_addr_to_serpar_number(&msg[0]) == 0) { /* else = Tuner regs to ignore : DIG_CFG, CTRL_RF_LT, PLL_CFG, PWM1_REG, ADCCLK, DIG_CFG_3; SLEEP_EN... */ | |
| if (num == 1) { /* write */ | |
| return w7090p_tuner_write_serpar(i2c_adap, msg, 1); | |
| } else { /* read */ | |
| return w7090p_tuner_read_serpar(i2c_adap, msg, 2); | |
| } | |
| } | |
| return num; | |
| } | |
| static int dib7090p_rw_on_apb(struct i2c_adapter *i2c_adap, | |
| struct i2c_msg msg[], int num, u16 apb_address) | |
| { | |
| struct dib7000p_state *state = i2c_get_adapdata(i2c_adap); | |
| u16 word; | |
| if (num == 1) { /* write */ | |
| dib7000p_write_word(state, apb_address, ((msg[0].buf[1] << 8) | (msg[0].buf[2]))); | |
| } else { | |
| word = dib7000p_read_word(state, apb_address); | |
| msg[1].buf[0] = (word >> 8) & 0xff; | |
| msg[1].buf[1] = (word) & 0xff; | |
| } | |
| return num; | |
| } | |
| static int dib7090_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) | |
| { | |
| struct dib7000p_state *state = i2c_get_adapdata(i2c_adap); | |
| u16 apb_address = 0, word; | |
| int i = 0; | |
| switch (msg[0].buf[0]) { | |
| case 0x12: | |
| apb_address = 1920; | |
| break; | |
| case 0x14: | |
| apb_address = 1921; | |
| break; | |
| case 0x24: | |
| apb_address = 1922; | |
| break; | |
| case 0x1a: | |
| apb_address = 1923; | |
| break; | |
| case 0x22: | |
| apb_address = 1924; | |
| break; | |
| case 0x33: | |
| apb_address = 1926; | |
| break; | |
| case 0x34: | |
| apb_address = 1927; | |
| break; | |
| case 0x35: | |
| apb_address = 1928; | |
| break; | |
| case 0x36: | |
| apb_address = 1929; | |
| break; | |
| case 0x37: | |
| apb_address = 1930; | |
| break; | |
| case 0x38: | |
| apb_address = 1931; | |
| break; | |
| case 0x39: | |
| apb_address = 1932; | |
| break; | |
| case 0x2a: | |
| apb_address = 1935; | |
| break; | |
| case 0x2b: | |
| apb_address = 1936; | |
| break; | |
| case 0x2c: | |
| apb_address = 1937; | |
| break; | |
| case 0x2d: | |
| apb_address = 1938; | |
| break; | |
| case 0x2e: | |
| apb_address = 1939; | |
| break; | |
| case 0x2f: | |
| apb_address = 1940; | |
| break; | |
| case 0x30: | |
| apb_address = 1941; | |
| break; | |
| case 0x31: | |
| apb_address = 1942; | |
| break; | |
| case 0x32: | |
| apb_address = 1943; | |
| break; | |
| case 0x3e: | |
| apb_address = 1944; | |
| break; | |
| case 0x3f: | |
| apb_address = 1945; | |
| break; | |
| case 0x40: | |
| apb_address = 1948; | |
| break; | |
| case 0x25: | |
| apb_address = 914; | |
| break; | |
| case 0x26: | |
| apb_address = 915; | |
| break; | |
| case 0x27: | |
| apb_address = 917; | |
| break; | |
| case 0x28: | |
| apb_address = 916; | |
| break; | |
| case 0x1d: | |
| i = ((dib7000p_read_word(state, 72) >> 12) & 0x3); | |
| word = dib7000p_read_word(state, 384 + i); | |
| msg[1].buf[0] = (word >> 8) & 0xff; | |
| msg[1].buf[1] = (word) & 0xff; | |
| return num; | |
| case 0x1f: | |
| if (num == 1) { /* write */ | |
| word = (u16) ((msg[0].buf[1] << 8) | msg[0].buf[2]); | |
| word &= 0x3; | |
| word = (dib7000p_read_word(state, 72) & ~(3 << 12)) | (word << 12); | |
| dib7000p_write_word(state, 72, word); /* Set the proper input */ | |
| return num; | |
| } | |
| } | |
| if (apb_address != 0) /* R/W acces via APB */ | |
| return dib7090p_rw_on_apb(i2c_adap, msg, num, apb_address); | |
| else /* R/W access via SERPAR */ | |
| return w7090p_tuner_rw_serpar(i2c_adap, msg, num); | |
| return 0; | |
| } | |
| static u32 dib7000p_i2c_func(struct i2c_adapter *adapter) | |
| { | |
| return I2C_FUNC_I2C; | |
| } | |
| static const struct i2c_algorithm dib7090_tuner_xfer_algo = { | |
| .master_xfer = dib7090_tuner_xfer, | |
| .functionality = dib7000p_i2c_func, | |
| }; | |
| static struct i2c_adapter *dib7090_get_i2c_tuner(struct dvb_frontend *fe) | |
| { | |
| struct dib7000p_state *st = fe->demodulator_priv; | |
| return &st->dib7090_tuner_adap; | |
| } | |
| static int dib7090_host_bus_drive(struct dib7000p_state *state, u8 drive) | |
| { | |
| u16 reg; | |
| /* drive host bus 2, 3, 4 */ | |
| reg = dib7000p_read_word(state, 1798) & ~((0x7) | (0x7 << 6) | (0x7 << 12)); | |
| reg |= (drive << 12) | (drive << 6) | drive; | |
| dib7000p_write_word(state, 1798, reg); | |
| /* drive host bus 5,6 */ | |
| reg = dib7000p_read_word(state, 1799) & ~((0x7 << 2) | (0x7 << 8)); | |
| reg |= (drive << 8) | (drive << 2); | |
| dib7000p_write_word(state, 1799, reg); | |
| /* drive host bus 7, 8, 9 */ | |
| reg = dib7000p_read_word(state, 1800) & ~((0x7) | (0x7 << 6) | (0x7 << 12)); | |
| reg |= (drive << 12) | (drive << 6) | drive; | |
| dib7000p_write_word(state, 1800, reg); | |
| /* drive host bus 10, 11 */ | |
| reg = dib7000p_read_word(state, 1801) & ~((0x7 << 2) | (0x7 << 8)); | |
| reg |= (drive << 8) | (drive << 2); | |
| dib7000p_write_word(state, 1801, reg); | |
| /* drive host bus 12, 13, 14 */ | |
| reg = dib7000p_read_word(state, 1802) & ~((0x7) | (0x7 << 6) | (0x7 << 12)); | |
| reg |= (drive << 12) | (drive << 6) | drive; | |
| dib7000p_write_word(state, 1802, reg); | |
| return 0; | |
| } | |
| static u32 dib7090_calcSyncFreq(u32 P_Kin, u32 P_Kout, u32 insertExtSynchro, u32 syncSize) | |
| { | |
| u32 quantif = 3; | |
| u32 nom = (insertExtSynchro * P_Kin + syncSize); | |
| u32 denom = P_Kout; | |
| u32 syncFreq = ((nom << quantif) / denom); | |
| if ((syncFreq & ((1 << quantif) - 1)) != 0) | |
| syncFreq = (syncFreq >> quantif) + 1; | |
| else | |
| syncFreq = (syncFreq >> quantif); | |
| if (syncFreq != 0) | |
| syncFreq = syncFreq - 1; | |
| return syncFreq; | |
| } | |
| static int dib7090_cfg_DibTx(struct dib7000p_state *state, u32 P_Kin, u32 P_Kout, u32 insertExtSynchro, u32 synchroMode, u32 syncWord, u32 syncSize) | |
| { | |
| dprintk("Configure DibStream Tx\n"); | |
| dib7000p_write_word(state, 1615, 1); | |
| dib7000p_write_word(state, 1603, P_Kin); | |
| dib7000p_write_word(state, 1605, P_Kout); | |
| dib7000p_write_word(state, 1606, insertExtSynchro); | |
| dib7000p_write_word(state, 1608, synchroMode); | |
| dib7000p_write_word(state, 1609, (syncWord >> 16) & 0xffff); | |
| dib7000p_write_word(state, 1610, syncWord & 0xffff); | |
| dib7000p_write_word(state, 1612, syncSize); | |
| dib7000p_write_word(state, 1615, 0); | |
| return 0; | |
| } | |
| static int dib7090_cfg_DibRx(struct dib7000p_state *state, u32 P_Kin, u32 P_Kout, u32 synchroMode, u32 insertExtSynchro, u32 syncWord, u32 syncSize, | |
| u32 dataOutRate) | |
| { | |
| u32 syncFreq; | |
| dprintk("Configure DibStream Rx\n"); | |
| if ((P_Kin != 0) && (P_Kout != 0)) { | |
| syncFreq = dib7090_calcSyncFreq(P_Kin, P_Kout, insertExtSynchro, syncSize); | |
| dib7000p_write_word(state, 1542, syncFreq); | |
| } | |
| dib7000p_write_word(state, 1554, 1); | |
| dib7000p_write_word(state, 1536, P_Kin); | |
| dib7000p_write_word(state, 1537, P_Kout); | |
| dib7000p_write_word(state, 1539, synchroMode); | |
| dib7000p_write_word(state, 1540, (syncWord >> 16) & 0xffff); | |
| dib7000p_write_word(state, 1541, syncWord & 0xffff); | |
| dib7000p_write_word(state, 1543, syncSize); | |
| dib7000p_write_word(state, 1544, dataOutRate); | |
| dib7000p_write_word(state, 1554, 0); | |
| return 0; | |
| } | |
| static void dib7090_enMpegMux(struct dib7000p_state *state, int onoff) | |
| { | |
| u16 reg_1287 = dib7000p_read_word(state, 1287); | |
| switch (onoff) { | |
| case 1: | |
| reg_1287 &= ~(1<<7); | |
| break; | |
| case 0: | |
| reg_1287 |= (1<<7); | |
| break; | |
| } | |
| dib7000p_write_word(state, 1287, reg_1287); | |
| } | |
| static void dib7090_configMpegMux(struct dib7000p_state *state, | |
| u16 pulseWidth, u16 enSerialMode, u16 enSerialClkDiv2) | |
| { | |
| dprintk("Enable Mpeg mux\n"); | |
| dib7090_enMpegMux(state, 0); | |
| /* If the input mode is MPEG do not divide the serial clock */ | |
| if ((enSerialMode == 1) && (state->input_mode_mpeg == 1)) | |
| enSerialClkDiv2 = 0; | |
| dib7000p_write_word(state, 1287, ((pulseWidth & 0x1f) << 2) | |
| | ((enSerialMode & 0x1) << 1) | |
| | (enSerialClkDiv2 & 0x1)); | |
| dib7090_enMpegMux(state, 1); | |
| } | |
| static void dib7090_setDibTxMux(struct dib7000p_state *state, int mode) | |
| { | |
| u16 reg_1288 = dib7000p_read_word(state, 1288) & ~(0x7 << 7); | |
| switch (mode) { | |
| case MPEG_ON_DIBTX: | |
| dprintk("SET MPEG ON DIBSTREAM TX\n"); | |
| dib7090_cfg_DibTx(state, 8, 5, 0, 0, 0, 0); | |
| reg_1288 |= (1<<9); | |
| break; | |
| case DIV_ON_DIBTX: | |
| dprintk("SET DIV_OUT ON DIBSTREAM TX\n"); | |
| dib7090_cfg_DibTx(state, 5, 5, 0, 0, 0, 0); | |
| reg_1288 |= (1<<8); | |
| break; | |
| case ADC_ON_DIBTX: | |
| dprintk("SET ADC_OUT ON DIBSTREAM TX\n"); | |
| dib7090_cfg_DibTx(state, 20, 5, 10, 0, 0, 0); | |
| reg_1288 |= (1<<7); | |
| break; | |
| default: | |
| break; | |
| } | |
| dib7000p_write_word(state, 1288, reg_1288); | |
| } | |
| static void dib7090_setHostBusMux(struct dib7000p_state *state, int mode) | |
| { | |
| u16 reg_1288 = dib7000p_read_word(state, 1288) & ~(0x7 << 4); | |
| switch (mode) { | |
| case DEMOUT_ON_HOSTBUS: | |
| dprintk("SET DEM OUT OLD INTERF ON HOST BUS\n"); | |
| dib7090_enMpegMux(state, 0); | |
| reg_1288 |= (1<<6); | |
| break; | |
| case DIBTX_ON_HOSTBUS: | |
| dprintk("SET DIBSTREAM TX ON HOST BUS\n"); | |
| dib7090_enMpegMux(state, 0); | |
| reg_1288 |= (1<<5); | |
| break; | |
| case MPEG_ON_HOSTBUS: | |
| dprintk("SET MPEG MUX ON HOST BUS\n"); | |
| reg_1288 |= (1<<4); | |
| break; | |
| default: | |
| break; | |
| } | |
| dib7000p_write_word(state, 1288, reg_1288); | |
| } | |
| static int dib7090_set_diversity_in(struct dvb_frontend *fe, int onoff) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 reg_1287; | |
| switch (onoff) { | |
| case 0: /* only use the internal way - not the diversity input */ | |
| dprintk("%s mode OFF : by default Enable Mpeg INPUT\n", __func__); | |
| dib7090_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0); | |
| /* Do not divide the serial clock of MPEG MUX */ | |
| /* in SERIAL MODE in case input mode MPEG is used */ | |
| reg_1287 = dib7000p_read_word(state, 1287); | |
| /* enSerialClkDiv2 == 1 ? */ | |
| if ((reg_1287 & 0x1) == 1) { | |
| /* force enSerialClkDiv2 = 0 */ | |
| reg_1287 &= ~0x1; | |
| dib7000p_write_word(state, 1287, reg_1287); | |
| } | |
| state->input_mode_mpeg = 1; | |
| break; | |
| case 1: /* both ways */ | |
| case 2: /* only the diversity input */ | |
| dprintk("%s ON : Enable diversity INPUT\n", __func__); | |
| dib7090_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0); | |
| state->input_mode_mpeg = 0; | |
| break; | |
| } | |
| dib7000p_set_diversity_in(&state->demod, onoff); | |
| return 0; | |
| } | |
| static int dib7090_set_output_mode(struct dvb_frontend *fe, int mode) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 outreg, smo_mode, fifo_threshold; | |
| u8 prefer_mpeg_mux_use = 1; | |
| int ret = 0; | |
| dib7090_host_bus_drive(state, 1); | |
| fifo_threshold = 1792; | |
| smo_mode = (dib7000p_read_word(state, 235) & 0x0050) | (1 << 1); | |
| outreg = dib7000p_read_word(state, 1286) & ~((1 << 10) | (0x7 << 6) | (1 << 1)); | |
| switch (mode) { | |
| case OUTMODE_HIGH_Z: | |
| outreg = 0; | |
| break; | |
| case OUTMODE_MPEG2_SERIAL: | |
| if (prefer_mpeg_mux_use) { | |
| dprintk("setting output mode TS_SERIAL using Mpeg Mux\n"); | |
| dib7090_configMpegMux(state, 3, 1, 1); | |
| dib7090_setHostBusMux(state, MPEG_ON_HOSTBUS); | |
| } else {/* Use Smooth block */ | |
| dprintk("setting output mode TS_SERIAL using Smooth bloc\n"); | |
| dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS); | |
| outreg |= (2<<6) | (0 << 1); | |
| } | |
| break; | |
| case OUTMODE_MPEG2_PAR_GATED_CLK: | |
| if (prefer_mpeg_mux_use) { | |
| dprintk("setting output mode TS_PARALLEL_GATED using Mpeg Mux\n"); | |
| dib7090_configMpegMux(state, 2, 0, 0); | |
| dib7090_setHostBusMux(state, MPEG_ON_HOSTBUS); | |
| } else { /* Use Smooth block */ | |
| dprintk("setting output mode TS_PARALLEL_GATED using Smooth block\n"); | |
| dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS); | |
| outreg |= (0<<6); | |
| } | |
| break; | |
| case OUTMODE_MPEG2_PAR_CONT_CLK: /* Using Smooth block only */ | |
| dprintk("setting output mode TS_PARALLEL_CONT using Smooth block\n"); | |
| dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS); | |
| outreg |= (1<<6); | |
| break; | |
| case OUTMODE_MPEG2_FIFO: /* Using Smooth block because not supported by new Mpeg Mux bloc */ | |
| dprintk("setting output mode TS_FIFO using Smooth block\n"); | |
| dib7090_setHostBusMux(state, DEMOUT_ON_HOSTBUS); | |
| outreg |= (5<<6); | |
| smo_mode |= (3 << 1); | |
| fifo_threshold = 512; | |
| break; | |
| case OUTMODE_DIVERSITY: | |
| dprintk("setting output mode MODE_DIVERSITY\n"); | |
| dib7090_setDibTxMux(state, DIV_ON_DIBTX); | |
| dib7090_setHostBusMux(state, DIBTX_ON_HOSTBUS); | |
| break; | |
| case OUTMODE_ANALOG_ADC: | |
| dprintk("setting output mode MODE_ANALOG_ADC\n"); | |
| dib7090_setDibTxMux(state, ADC_ON_DIBTX); | |
| dib7090_setHostBusMux(state, DIBTX_ON_HOSTBUS); | |
| break; | |
| } | |
| if (mode != OUTMODE_HIGH_Z) | |
| outreg |= (1 << 10); | |
| if (state->cfg.output_mpeg2_in_188_bytes) | |
| smo_mode |= (1 << 5); | |
| ret |= dib7000p_write_word(state, 235, smo_mode); | |
| ret |= dib7000p_write_word(state, 236, fifo_threshold); /* synchronous fread */ | |
| ret |= dib7000p_write_word(state, 1286, outreg); | |
| return ret; | |
| } | |
| static int dib7090_tuner_sleep(struct dvb_frontend *fe, int onoff) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 en_cur_state; | |
| dprintk("sleep dib7090: %d\n", onoff); | |
| en_cur_state = dib7000p_read_word(state, 1922); | |
| if (en_cur_state > 0xff) | |
| state->tuner_enable = en_cur_state; | |
| if (onoff) | |
| en_cur_state &= 0x00ff; | |
| else { | |
| if (state->tuner_enable != 0) | |
| en_cur_state = state->tuner_enable; | |
| } | |
| dib7000p_write_word(state, 1922, en_cur_state); | |
| return 0; | |
| } | |
| static int dib7090_get_adc_power(struct dvb_frontend *fe) | |
| { | |
| return dib7000p_get_adc_power(fe); | |
| } | |
| static int dib7090_slave_reset(struct dvb_frontend *fe) | |
| { | |
| struct dib7000p_state *state = fe->demodulator_priv; | |
| u16 reg; | |
| reg = dib7000p_read_word(state, 1794); | |
| dib7000p_write_word(state, 1794, reg | (4 << 12)); | |
| dib7000p_write_word(state, 1032, 0xffff); | |
| return 0; | |
| } | |
| static const struct dvb_frontend_ops dib7000p_ops; | |
| static struct dvb_frontend *dib7000p_init(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg) | |
| { | |
| struct dvb_frontend *demod; | |
| struct dib7000p_state *st; | |
| st = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL); | |
| if (st == NULL) | |
| return NULL; | |
| memcpy(&st->cfg, cfg, sizeof(struct dib7000p_config)); | |
| st->i2c_adap = i2c_adap; | |
| st->i2c_addr = i2c_addr; | |
| st->gpio_val = cfg->gpio_val; | |
| st->gpio_dir = cfg->gpio_dir; | |
| /* Ensure the output mode remains at the previous default if it's | |
| * not specifically set by the caller. | |
| */ | |
| if ((st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (st->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK)) | |
| st->cfg.output_mode = OUTMODE_MPEG2_FIFO; | |
| demod = &st->demod; | |
| demod->demodulator_priv = st; | |
| memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops)); | |
| mutex_init(&st->i2c_buffer_lock); | |
| dib7000p_write_word(st, 1287, 0x0003); /* sram lead in, rdy */ | |
| if (dib7000p_identify(st) != 0) | |
| goto error; | |
| st->version = dib7000p_read_word(st, 897); | |
| /* FIXME: make sure the dev.parent field is initialized, or else | |
| request_firmware() will hit an OOPS (this should be moved somewhere | |
| more common) */ | |
| st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent; | |
| dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); | |
| /* init 7090 tuner adapter */ | |
| strncpy(st->dib7090_tuner_adap.name, "DiB7090 tuner interface", sizeof(st->dib7090_tuner_adap.name)); | |
| st->dib7090_tuner_adap.algo = &dib7090_tuner_xfer_algo; | |
| st->dib7090_tuner_adap.algo_data = NULL; | |
| st->dib7090_tuner_adap.dev.parent = st->i2c_adap->dev.parent; | |
| i2c_set_adapdata(&st->dib7090_tuner_adap, st); | |
| i2c_add_adapter(&st->dib7090_tuner_adap); | |
| dib7000p_demod_reset(st); | |
| dib7000p_reset_stats(demod); | |
| if (st->version == SOC7090) { | |
| dib7090_set_output_mode(demod, st->cfg.output_mode); | |
| dib7090_set_diversity_in(demod, 0); | |
| } | |
| return demod; | |
| error: | |
| kfree(st); | |
| return NULL; | |
| } | |
| void *dib7000p_attach(struct dib7000p_ops *ops) | |
| { | |
| if (!ops) | |
| return NULL; | |
| ops->slave_reset = dib7090_slave_reset; | |
| ops->get_adc_power = dib7090_get_adc_power; | |
| ops->dib7000pc_detection = dib7000pc_detection; | |
| ops->get_i2c_tuner = dib7090_get_i2c_tuner; | |
| ops->tuner_sleep = dib7090_tuner_sleep; | |
| ops->init = dib7000p_init; | |
| ops->set_agc1_min = dib7000p_set_agc1_min; | |
| ops->set_gpio = dib7000p_set_gpio; | |
| ops->i2c_enumeration = dib7000p_i2c_enumeration; | |
| ops->pid_filter = dib7000p_pid_filter; | |
| ops->pid_filter_ctrl = dib7000p_pid_filter_ctrl; | |
| ops->get_i2c_master = dib7000p_get_i2c_master; | |
| ops->update_pll = dib7000p_update_pll; | |
| ops->ctrl_timf = dib7000p_ctrl_timf; | |
| ops->get_agc_values = dib7000p_get_agc_values; | |
| ops->set_wbd_ref = dib7000p_set_wbd_ref; | |
| return ops; | |
| } | |
| EXPORT_SYMBOL(dib7000p_attach); | |
| static const struct dvb_frontend_ops dib7000p_ops = { | |
| .delsys = { SYS_DVBT }, | |
| .info = { | |
| .name = "DiBcom 7000PC", | |
| .frequency_min = 44250000, | |
| .frequency_max = 867250000, | |
| .frequency_stepsize = 62500, | |
| .caps = FE_CAN_INVERSION_AUTO | | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | | |
| FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO, | |
| }, | |
| .release = dib7000p_release, | |
| .init = dib7000p_wakeup, | |
| .sleep = dib7000p_sleep, | |
| .set_frontend = dib7000p_set_frontend, | |
| .get_tune_settings = dib7000p_fe_get_tune_settings, | |
| .get_frontend = dib7000p_get_frontend, | |
| .read_status = dib7000p_read_status, | |
| .read_ber = dib7000p_read_ber, | |
| .read_signal_strength = dib7000p_read_signal_strength, | |
| .read_snr = dib7000p_read_snr, | |
| .read_ucblocks = dib7000p_read_unc_blocks, | |
| }; | |
| MODULE_AUTHOR("Olivier Grenie <olivie.grenie@parrot.com>"); | |
| MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>"); | |
| MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator"); | |
| MODULE_LICENSE("GPL"); |