| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/i2c.h> | |
| #include <linux/mutex.h> | |
| #include <linux/module.h> | |
| #include "dibx000_common.h" | |
| static int debug; | |
| module_param(debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); | |
| #define dprintk(fmt, arg...) do { \ | |
| if (debug) \ | |
| printk(KERN_DEBUG pr_fmt("%s: " fmt), \ | |
| __func__, ##arg); \ | |
| } while (0) | |
| static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val) | |
| { | |
| int ret; | |
| if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { | |
| dprintk("could not acquire lock\n"); | |
| return -EINVAL; | |
| } | |
| mst->i2c_write_buffer[0] = (reg >> 8) & 0xff; | |
| mst->i2c_write_buffer[1] = reg & 0xff; | |
| mst->i2c_write_buffer[2] = (val >> 8) & 0xff; | |
| mst->i2c_write_buffer[3] = val & 0xff; | |
| memset(mst->msg, 0, sizeof(struct i2c_msg)); | |
| mst->msg[0].addr = mst->i2c_addr; | |
| mst->msg[0].flags = 0; | |
| mst->msg[0].buf = mst->i2c_write_buffer; | |
| mst->msg[0].len = 4; | |
| ret = i2c_transfer(mst->i2c_adap, mst->msg, 1) != 1 ? -EREMOTEIO : 0; | |
| mutex_unlock(&mst->i2c_buffer_lock); | |
| return ret; | |
| } | |
| static u16 dibx000_read_word(struct dibx000_i2c_master *mst, u16 reg) | |
| { | |
| u16 ret; | |
| if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { | |
| dprintk("could not acquire lock\n"); | |
| return 0; | |
| } | |
| mst->i2c_write_buffer[0] = reg >> 8; | |
| mst->i2c_write_buffer[1] = reg & 0xff; | |
| memset(mst->msg, 0, 2 * sizeof(struct i2c_msg)); | |
| mst->msg[0].addr = mst->i2c_addr; | |
| mst->msg[0].flags = 0; | |
| mst->msg[0].buf = mst->i2c_write_buffer; | |
| mst->msg[0].len = 2; | |
| mst->msg[1].addr = mst->i2c_addr; | |
| mst->msg[1].flags = I2C_M_RD; | |
| mst->msg[1].buf = mst->i2c_read_buffer; | |
| mst->msg[1].len = 2; | |
| if (i2c_transfer(mst->i2c_adap, mst->msg, 2) != 2) | |
| dprintk("i2c read error on %d\n", reg); | |
| ret = (mst->i2c_read_buffer[0] << 8) | mst->i2c_read_buffer[1]; | |
| mutex_unlock(&mst->i2c_buffer_lock); | |
| return ret; | |
| } | |
| static int dibx000_is_i2c_done(struct dibx000_i2c_master *mst) | |
| { | |
| int i = 100; | |
| u16 status; | |
| while (((status = dibx000_read_word(mst, mst->base_reg + 2)) & 0x0100) == 0 && --i > 0) | |
| ; | |
| /* i2c timed out */ | |
| if (i == 0) | |
| return -EREMOTEIO; | |
| /* no acknowledge */ | |
| if ((status & 0x0080) == 0) | |
| return -EREMOTEIO; | |
| return 0; | |
| } | |
| static int dibx000_master_i2c_write(struct dibx000_i2c_master *mst, struct i2c_msg *msg, u8 stop) | |
| { | |
| u16 data; | |
| u16 da; | |
| u16 i; | |
| u16 txlen = msg->len, len; | |
| const u8 *b = msg->buf; | |
| while (txlen) { | |
| dibx000_read_word(mst, mst->base_reg + 2); | |
| len = txlen > 8 ? 8 : txlen; | |
| for (i = 0; i < len; i += 2) { | |
| data = *b++ << 8; | |
| if (i+1 < len) | |
| data |= *b++; | |
| dibx000_write_word(mst, mst->base_reg, data); | |
| } | |
| da = (((u8) (msg->addr)) << 9) | | |
| (1 << 8) | | |
| (1 << 7) | | |
| (0 << 6) | | |
| (0 << 5) | | |
| ((len & 0x7) << 2) | | |
| (0 << 1) | | |
| (0 << 0); | |
| if (txlen == msg->len) | |
| da |= 1 << 5; /* start */ | |
| if (txlen-len == 0 && stop) | |
| da |= 1 << 6; /* stop */ | |
| dibx000_write_word(mst, mst->base_reg+1, da); | |
| if (dibx000_is_i2c_done(mst) != 0) | |
| return -EREMOTEIO; | |
| txlen -= len; | |
| } | |
| return 0; | |
| } | |
| static int dibx000_master_i2c_read(struct dibx000_i2c_master *mst, struct i2c_msg *msg) | |
| { | |
| u16 da; | |
| u8 *b = msg->buf; | |
| u16 rxlen = msg->len, len; | |
| while (rxlen) { | |
| len = rxlen > 8 ? 8 : rxlen; | |
| da = (((u8) (msg->addr)) << 9) | | |
| (1 << 8) | | |
| (1 << 7) | | |
| (0 << 6) | | |
| (0 << 5) | | |
| ((len & 0x7) << 2) | | |
| (1 << 1) | | |
| (0 << 0); | |
| if (rxlen == msg->len) | |
| da |= 1 << 5; /* start */ | |
| if (rxlen-len == 0) | |
| da |= 1 << 6; /* stop */ | |
| dibx000_write_word(mst, mst->base_reg+1, da); | |
| if (dibx000_is_i2c_done(mst) != 0) | |
| return -EREMOTEIO; | |
| rxlen -= len; | |
| while (len) { | |
| da = dibx000_read_word(mst, mst->base_reg); | |
| *b++ = (da >> 8) & 0xff; | |
| len--; | |
| if (len >= 1) { | |
| *b++ = da & 0xff; | |
| len--; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed) | |
| { | |
| struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); | |
| if (mst->device_rev < DIB7000MC && speed < 235) | |
| speed = 235; | |
| return dibx000_write_word(mst, mst->base_reg + 3, (u16)(60000 / speed)); | |
| } | |
| EXPORT_SYMBOL(dibx000_i2c_set_speed); | |
| static u32 dibx000_i2c_func(struct i2c_adapter *adapter) | |
| { | |
| return I2C_FUNC_I2C; | |
| } | |
| static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst, | |
| enum dibx000_i2c_interface intf) | |
| { | |
| if (mst->device_rev > DIB3000MC && mst->selected_interface != intf) { | |
| dprintk("selecting interface: %d\n", intf); | |
| mst->selected_interface = intf; | |
| return dibx000_write_word(mst, mst->base_reg + 4, intf); | |
| } | |
| return 0; | |
| } | |
| static int dibx000_i2c_master_xfer_gpio12(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) | |
| { | |
| struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); | |
| int msg_index; | |
| int ret = 0; | |
| dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_1_2); | |
| for (msg_index = 0; msg_index < num; msg_index++) { | |
| if (msg[msg_index].flags & I2C_M_RD) { | |
| ret = dibx000_master_i2c_read(mst, &msg[msg_index]); | |
| if (ret != 0) | |
| return 0; | |
| } else { | |
| ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1); | |
| if (ret != 0) | |
| return 0; | |
| } | |
| } | |
| return num; | |
| } | |
| static int dibx000_i2c_master_xfer_gpio34(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) | |
| { | |
| struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); | |
| int msg_index; | |
| int ret = 0; | |
| dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_3_4); | |
| for (msg_index = 0; msg_index < num; msg_index++) { | |
| if (msg[msg_index].flags & I2C_M_RD) { | |
| ret = dibx000_master_i2c_read(mst, &msg[msg_index]); | |
| if (ret != 0) | |
| return 0; | |
| } else { | |
| ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1); | |
| if (ret != 0) | |
| return 0; | |
| } | |
| } | |
| return num; | |
| } | |
| static struct i2c_algorithm dibx000_i2c_master_gpio12_xfer_algo = { | |
| .master_xfer = dibx000_i2c_master_xfer_gpio12, | |
| .functionality = dibx000_i2c_func, | |
| }; | |
| static struct i2c_algorithm dibx000_i2c_master_gpio34_xfer_algo = { | |
| .master_xfer = dibx000_i2c_master_xfer_gpio34, | |
| .functionality = dibx000_i2c_func, | |
| }; | |
| static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], | |
| u8 addr, int onoff) | |
| { | |
| u16 val; | |
| if (onoff) | |
| val = addr << 8; // bit 7 = use master or not, if 0, the gate is open | |
| else | |
| val = 1 << 7; | |
| if (mst->device_rev > DIB7000) | |
| val <<= 1; | |
| tx[0] = (((mst->base_reg + 1) >> 8) & 0xff); | |
| tx[1] = ((mst->base_reg + 1) & 0xff); | |
| tx[2] = val >> 8; | |
| tx[3] = val & 0xff; | |
| return 0; | |
| } | |
| static int dibx000_i2c_gated_gpio67_xfer(struct i2c_adapter *i2c_adap, | |
| struct i2c_msg msg[], int num) | |
| { | |
| struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); | |
| int ret; | |
| if (num > 32) { | |
| dprintk("%s: too much I2C message to be transmitted (%i).\ | |
| Maximum is 32", __func__, num); | |
| return -ENOMEM; | |
| } | |
| dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_6_7); | |
| if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { | |
| dprintk("could not acquire lock\n"); | |
| return -EINVAL; | |
| } | |
| memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num)); | |
| /* open the gate */ | |
| dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1); | |
| mst->msg[0].addr = mst->i2c_addr; | |
| mst->msg[0].buf = &mst->i2c_write_buffer[0]; | |
| mst->msg[0].len = 4; | |
| memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num); | |
| /* close the gate */ | |
| dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0); | |
| mst->msg[num + 1].addr = mst->i2c_addr; | |
| mst->msg[num + 1].buf = &mst->i2c_write_buffer[4]; | |
| mst->msg[num + 1].len = 4; | |
| ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ? | |
| num : -EIO); | |
| mutex_unlock(&mst->i2c_buffer_lock); | |
| return ret; | |
| } | |
| static struct i2c_algorithm dibx000_i2c_gated_gpio67_algo = { | |
| .master_xfer = dibx000_i2c_gated_gpio67_xfer, | |
| .functionality = dibx000_i2c_func, | |
| }; | |
| static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, | |
| struct i2c_msg msg[], int num) | |
| { | |
| struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); | |
| int ret; | |
| if (num > 32) { | |
| dprintk("%s: too much I2C message to be transmitted (%i).\ | |
| Maximum is 32", __func__, num); | |
| return -ENOMEM; | |
| } | |
| dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER); | |
| if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { | |
| dprintk("could not acquire lock\n"); | |
| return -EINVAL; | |
| } | |
| memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num)); | |
| /* open the gate */ | |
| dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1); | |
| mst->msg[0].addr = mst->i2c_addr; | |
| mst->msg[0].buf = &mst->i2c_write_buffer[0]; | |
| mst->msg[0].len = 4; | |
| memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num); | |
| /* close the gate */ | |
| dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0); | |
| mst->msg[num + 1].addr = mst->i2c_addr; | |
| mst->msg[num + 1].buf = &mst->i2c_write_buffer[4]; | |
| mst->msg[num + 1].len = 4; | |
| ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ? | |
| num : -EIO); | |
| mutex_unlock(&mst->i2c_buffer_lock); | |
| return ret; | |
| } | |
| static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = { | |
| .master_xfer = dibx000_i2c_gated_tuner_xfer, | |
| .functionality = dibx000_i2c_func, | |
| }; | |
| struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, | |
| enum dibx000_i2c_interface intf, | |
| int gating) | |
| { | |
| struct i2c_adapter *i2c = NULL; | |
| switch (intf) { | |
| case DIBX000_I2C_INTERFACE_TUNER: | |
| if (gating) | |
| i2c = &mst->gated_tuner_i2c_adap; | |
| break; | |
| case DIBX000_I2C_INTERFACE_GPIO_1_2: | |
| if (!gating) | |
| i2c = &mst->master_i2c_adap_gpio12; | |
| break; | |
| case DIBX000_I2C_INTERFACE_GPIO_3_4: | |
| if (!gating) | |
| i2c = &mst->master_i2c_adap_gpio34; | |
| break; | |
| case DIBX000_I2C_INTERFACE_GPIO_6_7: | |
| if (gating) | |
| i2c = &mst->master_i2c_adap_gpio67; | |
| break; | |
| default: | |
| pr_err("incorrect I2C interface selected\n"); | |
| break; | |
| } | |
| return i2c; | |
| } | |
| EXPORT_SYMBOL(dibx000_get_i2c_adapter); | |
| void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst) | |
| { | |
| /* initialize the i2c-master by closing the gate */ | |
| u8 tx[4]; | |
| struct i2c_msg m = {.addr = mst->i2c_addr,.buf = tx,.len = 4 }; | |
| dibx000_i2c_gate_ctrl(mst, tx, 0, 0); | |
| i2c_transfer(mst->i2c_adap, &m, 1); | |
| mst->selected_interface = 0xff; // the first time force a select of the I2C | |
| dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER); | |
| } | |
| EXPORT_SYMBOL(dibx000_reset_i2c_master); | |
| static int i2c_adapter_init(struct i2c_adapter *i2c_adap, | |
| struct i2c_algorithm *algo, const char *name, | |
| struct dibx000_i2c_master *mst) | |
| { | |
| strncpy(i2c_adap->name, name, sizeof(i2c_adap->name)); | |
| i2c_adap->algo = algo; | |
| i2c_adap->algo_data = NULL; | |
| i2c_set_adapdata(i2c_adap, mst); | |
| if (i2c_add_adapter(i2c_adap) < 0) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, | |
| struct i2c_adapter *i2c_adap, u8 i2c_addr) | |
| { | |
| int ret; | |
| mutex_init(&mst->i2c_buffer_lock); | |
| if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { | |
| dprintk("could not acquire lock\n"); | |
| return -EINVAL; | |
| } | |
| memset(mst->msg, 0, sizeof(struct i2c_msg)); | |
| mst->msg[0].addr = i2c_addr >> 1; | |
| mst->msg[0].flags = 0; | |
| mst->msg[0].buf = mst->i2c_write_buffer; | |
| mst->msg[0].len = 4; | |
| mst->device_rev = device_rev; | |
| mst->i2c_adap = i2c_adap; | |
| mst->i2c_addr = i2c_addr >> 1; | |
| if (device_rev == DIB7000P || device_rev == DIB8000) | |
| mst->base_reg = 1024; | |
| else | |
| mst->base_reg = 768; | |
| mst->gated_tuner_i2c_adap.dev.parent = mst->i2c_adap->dev.parent; | |
| if (i2c_adapter_init | |
| (&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo, | |
| "DiBX000 tuner I2C bus", mst) != 0) | |
| pr_err("could not initialize the tuner i2c_adapter\n"); | |
| mst->master_i2c_adap_gpio12.dev.parent = mst->i2c_adap->dev.parent; | |
| if (i2c_adapter_init | |
| (&mst->master_i2c_adap_gpio12, &dibx000_i2c_master_gpio12_xfer_algo, | |
| "DiBX000 master GPIO12 I2C bus", mst) != 0) | |
| pr_err("could not initialize the master i2c_adapter\n"); | |
| mst->master_i2c_adap_gpio34.dev.parent = mst->i2c_adap->dev.parent; | |
| if (i2c_adapter_init | |
| (&mst->master_i2c_adap_gpio34, &dibx000_i2c_master_gpio34_xfer_algo, | |
| "DiBX000 master GPIO34 I2C bus", mst) != 0) | |
| pr_err("could not initialize the master i2c_adapter\n"); | |
| mst->master_i2c_adap_gpio67.dev.parent = mst->i2c_adap->dev.parent; | |
| if (i2c_adapter_init | |
| (&mst->master_i2c_adap_gpio67, &dibx000_i2c_gated_gpio67_algo, | |
| "DiBX000 master GPIO67 I2C bus", mst) != 0) | |
| pr_err("could not initialize the master i2c_adapter\n"); | |
| /* initialize the i2c-master by closing the gate */ | |
| dibx000_i2c_gate_ctrl(mst, mst->i2c_write_buffer, 0, 0); | |
| ret = (i2c_transfer(i2c_adap, mst->msg, 1) == 1); | |
| mutex_unlock(&mst->i2c_buffer_lock); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(dibx000_init_i2c_master); | |
| void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst) | |
| { | |
| i2c_del_adapter(&mst->gated_tuner_i2c_adap); | |
| i2c_del_adapter(&mst->master_i2c_adap_gpio12); | |
| i2c_del_adapter(&mst->master_i2c_adap_gpio34); | |
| i2c_del_adapter(&mst->master_i2c_adap_gpio67); | |
| } | |
| EXPORT_SYMBOL(dibx000_exit_i2c_master); | |
| MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>"); | |
| MODULE_DESCRIPTION("Common function the DiBcom demodulator family"); | |
| MODULE_LICENSE("GPL"); |