| /* | |
| * Driver for Zarlink DVB-T MT352 demodulator | |
| * | |
| * Written by Holger Waechtler <holger@qanu.de> | |
| * and Daniel Mack <daniel@qanu.de> | |
| * | |
| * AVerMedia AVerTV DVB-T 771 support by | |
| * Wolfram Joost <dbox2@frokaschwei.de> | |
| * | |
| * Support for Samsung TDTC9251DH01C(M) tuner | |
| * Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it> | |
| * Amauri Celani <acelani@essegi.net> | |
| * | |
| * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by | |
| * Christopher Pascoe <c.pascoe@itee.uq.edu.au> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/string.h> | |
| #include <linux/slab.h> | |
| #include "dvb_frontend.h" | |
| #include "mt352_priv.h" | |
| #include "mt352.h" | |
| struct mt352_state { | |
| struct i2c_adapter* i2c; | |
| struct dvb_frontend frontend; | |
| /* configuration settings */ | |
| struct mt352_config config; | |
| }; | |
| static int debug; | |
| #define dprintk(args...) \ | |
| do { \ | |
| if (debug) printk(KERN_DEBUG "mt352: " args); \ | |
| } while (0) | |
| static int mt352_single_write(struct dvb_frontend *fe, u8 reg, u8 val) | |
| { | |
| struct mt352_state* state = fe->demodulator_priv; | |
| u8 buf[2] = { reg, val }; | |
| struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0, | |
| .buf = buf, .len = 2 }; | |
| int err = i2c_transfer(state->i2c, &msg, 1); | |
| if (err != 1) { | |
| printk("mt352_write() to reg %x failed (err = %d)!\n", reg, err); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static int _mt352_write(struct dvb_frontend* fe, const u8 ibuf[], int ilen) | |
| { | |
| int err,i; | |
| for (i=0; i < ilen-1; i++) | |
| if ((err = mt352_single_write(fe,ibuf[0]+i,ibuf[i+1]))) | |
| return err; | |
| return 0; | |
| } | |
| static int mt352_read_register(struct mt352_state* state, u8 reg) | |
| { | |
| int ret; | |
| u8 b0 [] = { reg }; | |
| u8 b1 [] = { 0 }; | |
| struct i2c_msg msg [] = { { .addr = state->config.demod_address, | |
| .flags = 0, | |
| .buf = b0, .len = 1 }, | |
| { .addr = state->config.demod_address, | |
| .flags = I2C_M_RD, | |
| .buf = b1, .len = 1 } }; | |
| ret = i2c_transfer(state->i2c, msg, 2); | |
| if (ret != 2) { | |
| printk("%s: readreg error (reg=%d, ret==%i)\n", | |
| __func__, reg, ret); | |
| return ret; | |
| } | |
| return b1[0]; | |
| } | |
| static int mt352_sleep(struct dvb_frontend* fe) | |
| { | |
| static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 }; | |
| _mt352_write(fe, mt352_softdown, sizeof(mt352_softdown)); | |
| return 0; | |
| } | |
| static void mt352_calc_nominal_rate(struct mt352_state* state, | |
| u32 bandwidth, | |
| unsigned char *buf) | |
| { | |
| u32 adc_clock = 20480; /* 20.340 MHz */ | |
| u32 bw,value; | |
| switch (bandwidth) { | |
| case 6000000: | |
| bw = 6; | |
| break; | |
| case 7000000: | |
| bw = 7; | |
| break; | |
| case 8000000: | |
| default: | |
| bw = 8; | |
| break; | |
| } | |
| if (state->config.adc_clock) | |
| adc_clock = state->config.adc_clock; | |
| value = 64 * bw * (1<<16) / (7 * 8); | |
| value = value * 1000 / adc_clock; | |
| dprintk("%s: bw %d, adc_clock %d => 0x%x\n", | |
| __func__, bw, adc_clock, value); | |
| buf[0] = msb(value); | |
| buf[1] = lsb(value); | |
| } | |
| static void mt352_calc_input_freq(struct mt352_state* state, | |
| unsigned char *buf) | |
| { | |
| int adc_clock = 20480; /* 20.480000 MHz */ | |
| int if2 = 36167; /* 36.166667 MHz */ | |
| int ife,value; | |
| if (state->config.adc_clock) | |
| adc_clock = state->config.adc_clock; | |
| if (state->config.if2) | |
| if2 = state->config.if2; | |
| if (adc_clock >= if2 * 2) | |
| ife = if2; | |
| else { | |
| ife = adc_clock - (if2 % adc_clock); | |
| if (ife > adc_clock / 2) | |
| ife = adc_clock - ife; | |
| } | |
| value = -16374 * ife / adc_clock; | |
| dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n", | |
| __func__, if2, ife, adc_clock, value, value & 0x3fff); | |
| buf[0] = msb(value); | |
| buf[1] = lsb(value); | |
| } | |
| static int mt352_set_parameters(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *op = &fe->dtv_property_cache; | |
| struct mt352_state* state = fe->demodulator_priv; | |
| unsigned char buf[13]; | |
| static unsigned char tuner_go[] = { 0x5d, 0x01 }; | |
| static unsigned char fsm_go[] = { 0x5e, 0x01 }; | |
| unsigned int tps = 0; | |
| switch (op->code_rate_HP) { | |
| case FEC_2_3: | |
| tps |= (1 << 7); | |
| break; | |
| case FEC_3_4: | |
| tps |= (2 << 7); | |
| break; | |
| case FEC_5_6: | |
| tps |= (3 << 7); | |
| break; | |
| case FEC_7_8: | |
| tps |= (4 << 7); | |
| break; | |
| case FEC_1_2: | |
| case FEC_AUTO: | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (op->code_rate_LP) { | |
| case FEC_2_3: | |
| tps |= (1 << 4); | |
| break; | |
| case FEC_3_4: | |
| tps |= (2 << 4); | |
| break; | |
| case FEC_5_6: | |
| tps |= (3 << 4); | |
| break; | |
| case FEC_7_8: | |
| tps |= (4 << 4); | |
| break; | |
| case FEC_1_2: | |
| case FEC_AUTO: | |
| break; | |
| case FEC_NONE: | |
| if (op->hierarchy == HIERARCHY_AUTO || | |
| op->hierarchy == HIERARCHY_NONE) | |
| break; | |
| /* fall through */ | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (op->modulation) { | |
| case QPSK: | |
| break; | |
| case QAM_AUTO: | |
| case QAM_16: | |
| tps |= (1 << 13); | |
| break; | |
| case QAM_64: | |
| tps |= (2 << 13); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (op->transmission_mode) { | |
| case TRANSMISSION_MODE_2K: | |
| case TRANSMISSION_MODE_AUTO: | |
| break; | |
| case TRANSMISSION_MODE_8K: | |
| tps |= (1 << 0); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (op->guard_interval) { | |
| case GUARD_INTERVAL_1_32: | |
| case GUARD_INTERVAL_AUTO: | |
| break; | |
| case GUARD_INTERVAL_1_16: | |
| tps |= (1 << 2); | |
| break; | |
| case GUARD_INTERVAL_1_8: | |
| tps |= (2 << 2); | |
| break; | |
| case GUARD_INTERVAL_1_4: | |
| tps |= (3 << 2); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (op->hierarchy) { | |
| case HIERARCHY_AUTO: | |
| case HIERARCHY_NONE: | |
| break; | |
| case HIERARCHY_1: | |
| tps |= (1 << 10); | |
| break; | |
| case HIERARCHY_2: | |
| tps |= (2 << 10); | |
| break; | |
| case HIERARCHY_4: | |
| tps |= (3 << 10); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| buf[0] = TPS_GIVEN_1; /* TPS_GIVEN_1 and following registers */ | |
| buf[1] = msb(tps); /* TPS_GIVEN_(1|0) */ | |
| buf[2] = lsb(tps); | |
| buf[3] = 0x50; // old | |
| // buf[3] = 0xf4; // pinnacle | |
| mt352_calc_nominal_rate(state, op->bandwidth_hz, buf+4); | |
| mt352_calc_input_freq(state, buf+6); | |
| if (state->config.no_tuner) { | |
| if (fe->ops.tuner_ops.set_params) { | |
| fe->ops.tuner_ops.set_params(fe); | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 0); | |
| } | |
| _mt352_write(fe, buf, 8); | |
| _mt352_write(fe, fsm_go, 2); | |
| } else { | |
| if (fe->ops.tuner_ops.calc_regs) { | |
| fe->ops.tuner_ops.calc_regs(fe, buf+8, 5); | |
| buf[8] <<= 1; | |
| _mt352_write(fe, buf, sizeof(buf)); | |
| _mt352_write(fe, tuner_go, 2); | |
| } | |
| } | |
| return 0; | |
| } | |
| static int mt352_get_parameters(struct dvb_frontend* fe, | |
| struct dtv_frontend_properties *op) | |
| { | |
| struct mt352_state* state = fe->demodulator_priv; | |
| u16 tps; | |
| u16 div; | |
| u8 trl; | |
| static const u8 tps_fec_to_api[8] = | |
| { | |
| FEC_1_2, | |
| FEC_2_3, | |
| FEC_3_4, | |
| FEC_5_6, | |
| FEC_7_8, | |
| FEC_AUTO, | |
| FEC_AUTO, | |
| FEC_AUTO | |
| }; | |
| if ( (mt352_read_register(state,0x00) & 0xC0) != 0xC0 ) | |
| return -EINVAL; | |
| /* Use TPS_RECEIVED-registers, not the TPS_CURRENT-registers because | |
| * the mt352 sometimes works with the wrong parameters | |
| */ | |
| tps = (mt352_read_register(state, TPS_RECEIVED_1) << 8) | mt352_read_register(state, TPS_RECEIVED_0); | |
| div = (mt352_read_register(state, CHAN_START_1) << 8) | mt352_read_register(state, CHAN_START_0); | |
| trl = mt352_read_register(state, TRL_NOMINAL_RATE_1); | |
| op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7]; | |
| op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7]; | |
| switch ( (tps >> 13) & 3) | |
| { | |
| case 0: | |
| op->modulation = QPSK; | |
| break; | |
| case 1: | |
| op->modulation = QAM_16; | |
| break; | |
| case 2: | |
| op->modulation = QAM_64; | |
| break; | |
| default: | |
| op->modulation = QAM_AUTO; | |
| break; | |
| } | |
| op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : TRANSMISSION_MODE_2K; | |
| switch ( (tps >> 2) & 3) | |
| { | |
| case 0: | |
| op->guard_interval = GUARD_INTERVAL_1_32; | |
| break; | |
| case 1: | |
| op->guard_interval = GUARD_INTERVAL_1_16; | |
| break; | |
| case 2: | |
| op->guard_interval = GUARD_INTERVAL_1_8; | |
| break; | |
| case 3: | |
| op->guard_interval = GUARD_INTERVAL_1_4; | |
| break; | |
| default: | |
| op->guard_interval = GUARD_INTERVAL_AUTO; | |
| break; | |
| } | |
| switch ( (tps >> 10) & 7) | |
| { | |
| case 0: | |
| op->hierarchy = HIERARCHY_NONE; | |
| break; | |
| case 1: | |
| op->hierarchy = HIERARCHY_1; | |
| break; | |
| case 2: | |
| op->hierarchy = HIERARCHY_2; | |
| break; | |
| case 3: | |
| op->hierarchy = HIERARCHY_4; | |
| break; | |
| default: | |
| op->hierarchy = HIERARCHY_AUTO; | |
| break; | |
| } | |
| op->frequency = (500 * (div - IF_FREQUENCYx6)) / 3 * 1000; | |
| if (trl == 0x72) | |
| op->bandwidth_hz = 8000000; | |
| else if (trl == 0x64) | |
| op->bandwidth_hz = 7000000; | |
| else | |
| op->bandwidth_hz = 6000000; | |
| if (mt352_read_register(state, STATUS_2) & 0x02) | |
| op->inversion = INVERSION_OFF; | |
| else | |
| op->inversion = INVERSION_ON; | |
| return 0; | |
| } | |
| static int mt352_read_status(struct dvb_frontend *fe, enum fe_status *status) | |
| { | |
| struct mt352_state* state = fe->demodulator_priv; | |
| int s0, s1, s3; | |
| /* FIXME: | |
| * | |
| * The MT352 design manual from Zarlink states (page 46-47): | |
| * | |
| * Notes about the TUNER_GO register: | |
| * | |
| * If the Read_Tuner_Byte (bit-1) is activated, then the tuner status | |
| * byte is copied from the tuner to the STATUS_3 register and | |
| * completion of the read operation is indicated by bit-5 of the | |
| * INTERRUPT_3 register. | |
| */ | |
| if ((s0 = mt352_read_register(state, STATUS_0)) < 0) | |
| return -EREMOTEIO; | |
| if ((s1 = mt352_read_register(state, STATUS_1)) < 0) | |
| return -EREMOTEIO; | |
| if ((s3 = mt352_read_register(state, STATUS_3)) < 0) | |
| return -EREMOTEIO; | |
| *status = 0; | |
| if (s0 & (1 << 4)) | |
| *status |= FE_HAS_CARRIER; | |
| if (s0 & (1 << 1)) | |
| *status |= FE_HAS_VITERBI; | |
| if (s0 & (1 << 5)) | |
| *status |= FE_HAS_LOCK; | |
| if (s1 & (1 << 1)) | |
| *status |= FE_HAS_SYNC; | |
| if (s3 & (1 << 6)) | |
| *status |= FE_HAS_SIGNAL; | |
| if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != | |
| (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) | |
| *status &= ~FE_HAS_LOCK; | |
| return 0; | |
| } | |
| static int mt352_read_ber(struct dvb_frontend* fe, u32* ber) | |
| { | |
| struct mt352_state* state = fe->demodulator_priv; | |
| *ber = (mt352_read_register (state, RS_ERR_CNT_2) << 16) | | |
| (mt352_read_register (state, RS_ERR_CNT_1) << 8) | | |
| (mt352_read_register (state, RS_ERR_CNT_0)); | |
| return 0; | |
| } | |
| static int mt352_read_signal_strength(struct dvb_frontend* fe, u16* strength) | |
| { | |
| struct mt352_state* state = fe->demodulator_priv; | |
| /* align the 12 bit AGC gain with the most significant bits */ | |
| u16 signal = ((mt352_read_register(state, AGC_GAIN_1) & 0x0f) << 12) | | |
| (mt352_read_register(state, AGC_GAIN_0) << 4); | |
| /* inverse of gain is signal strength */ | |
| *strength = ~signal; | |
| return 0; | |
| } | |
| static int mt352_read_snr(struct dvb_frontend* fe, u16* snr) | |
| { | |
| struct mt352_state* state = fe->demodulator_priv; | |
| u8 _snr = mt352_read_register (state, SNR); | |
| *snr = (_snr << 8) | _snr; | |
| return 0; | |
| } | |
| static int mt352_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) | |
| { | |
| struct mt352_state* state = fe->demodulator_priv; | |
| *ucblocks = (mt352_read_register (state, RS_UBC_1) << 8) | | |
| (mt352_read_register (state, RS_UBC_0)); | |
| return 0; | |
| } | |
| static int mt352_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) | |
| { | |
| fe_tune_settings->min_delay_ms = 800; | |
| fe_tune_settings->step_size = 0; | |
| fe_tune_settings->max_drift = 0; | |
| return 0; | |
| } | |
| static int mt352_init(struct dvb_frontend* fe) | |
| { | |
| struct mt352_state* state = fe->demodulator_priv; | |
| static u8 mt352_reset_attach [] = { RESET, 0xC0 }; | |
| dprintk("%s: hello\n",__func__); | |
| if ((mt352_read_register(state, CLOCK_CTL) & 0x10) == 0 || | |
| (mt352_read_register(state, CONFIG) & 0x20) == 0) { | |
| /* Do a "hard" reset */ | |
| _mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach)); | |
| return state->config.demod_init(fe); | |
| } | |
| return 0; | |
| } | |
| static void mt352_release(struct dvb_frontend* fe) | |
| { | |
| struct mt352_state* state = fe->demodulator_priv; | |
| kfree(state); | |
| } | |
| static const struct dvb_frontend_ops mt352_ops; | |
| struct dvb_frontend* mt352_attach(const struct mt352_config* config, | |
| struct i2c_adapter* i2c) | |
| { | |
| struct mt352_state* state = NULL; | |
| /* allocate memory for the internal state */ | |
| state = kzalloc(sizeof(struct mt352_state), GFP_KERNEL); | |
| if (state == NULL) goto error; | |
| /* setup the state */ | |
| state->i2c = i2c; | |
| memcpy(&state->config,config,sizeof(struct mt352_config)); | |
| /* check if the demod is there */ | |
| if (mt352_read_register(state, CHIP_ID) != ID_MT352) goto error; | |
| /* create dvb_frontend */ | |
| memcpy(&state->frontend.ops, &mt352_ops, sizeof(struct dvb_frontend_ops)); | |
| state->frontend.demodulator_priv = state; | |
| return &state->frontend; | |
| error: | |
| kfree(state); | |
| return NULL; | |
| } | |
| static const struct dvb_frontend_ops mt352_ops = { | |
| .delsys = { SYS_DVBT }, | |
| .info = { | |
| .name = "Zarlink MT352 DVB-T", | |
| .frequency_min = 174000000, | |
| .frequency_max = 862000000, | |
| .frequency_stepsize = 166667, | |
| .frequency_tolerance = 0, | |
| .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | | |
| FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | | |
| FE_CAN_FEC_AUTO | | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | | |
| FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | | |
| FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | | |
| FE_CAN_MUTE_TS | |
| }, | |
| .release = mt352_release, | |
| .init = mt352_init, | |
| .sleep = mt352_sleep, | |
| .write = _mt352_write, | |
| .set_frontend = mt352_set_parameters, | |
| .get_frontend = mt352_get_parameters, | |
| .get_tune_settings = mt352_get_tune_settings, | |
| .read_status = mt352_read_status, | |
| .read_ber = mt352_read_ber, | |
| .read_signal_strength = mt352_read_signal_strength, | |
| .read_snr = mt352_read_snr, | |
| .read_ucblocks = mt352_read_ucblocks, | |
| }; | |
| module_param(debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); | |
| MODULE_DESCRIPTION("Zarlink MT352 DVB-T Demodulator driver"); | |
| MODULE_AUTHOR("Holger Waechtler, Daniel Mack, Antonio Mancuso"); | |
| MODULE_LICENSE("GPL"); | |
| EXPORT_SYMBOL(mt352_attach); |