| /* | |
| * Colour AR M64278(VGA) driver for Video4Linux | |
| * | |
| * Copyright (C) 2003 Takeo Takahashi <takahashi.takeo@renesas.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| * | |
| * Some code is taken from AR driver sample program for M3T-M32700UT. | |
| * | |
| * AR driver sample (M32R SDK): | |
| * Copyright (c) 2003 RENESAS TECHNOROGY CORPORATION | |
| * AND RENESAS SOLUTIONS CORPORATION | |
| * All Rights Reserved. | |
| * | |
| * 2003-09-01: Support w3cam by Takeo Takahashi | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/mm.h> | |
| #include <linux/sched.h> | |
| #include <linux/videodev2.h> | |
| #include <media/v4l2-common.h> | |
| #include <media/v4l2-device.h> | |
| #include <media/v4l2-ioctl.h> | |
| #include <media/v4l2-fh.h> | |
| #include <linux/mutex.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/m32r.h> | |
| #include <asm/io.h> | |
| #include <asm/dma.h> | |
| #include <asm/byteorder.h> | |
| #if 0 | |
| #define DEBUG(n, args...) printk(KERN_INFO args) | |
| #define CHECK_LOST 1 | |
| #else | |
| #define DEBUG(n, args...) | |
| #define CHECK_LOST 0 | |
| #endif | |
| /* | |
| * USE_INT is always 0, interrupt mode is not available | |
| * on linux due to lack of speed | |
| */ | |
| #define USE_INT 0 /* Don't modify */ | |
| #define VERSION "0.0.5" | |
| #define ar_inl(addr) inl((unsigned long)(addr)) | |
| #define ar_outl(val, addr) outl((unsigned long)(val), (unsigned long)(addr)) | |
| extern struct cpuinfo_m32r boot_cpu_data; | |
| /* | |
| * CCD pixel size | |
| * Note that M32700UT does not support CIF mode, but QVGA is | |
| * supported by M32700UT hardware using VGA mode of AR LSI. | |
| * | |
| * Supported: VGA (Normal mode, Interlace mode) | |
| * QVGA (Always Interlace mode of VGA) | |
| * | |
| */ | |
| #define AR_WIDTH_VGA 640 | |
| #define AR_HEIGHT_VGA 480 | |
| #define AR_WIDTH_QVGA 320 | |
| #define AR_HEIGHT_QVGA 240 | |
| #define MIN_AR_WIDTH AR_WIDTH_QVGA | |
| #define MIN_AR_HEIGHT AR_HEIGHT_QVGA | |
| #define MAX_AR_WIDTH AR_WIDTH_VGA | |
| #define MAX_AR_HEIGHT AR_HEIGHT_VGA | |
| /* bits & bytes per pixel */ | |
| #define AR_BITS_PER_PIXEL 16 | |
| #define AR_BYTES_PER_PIXEL (AR_BITS_PER_PIXEL / 8) | |
| /* line buffer size */ | |
| #define AR_LINE_BYTES_VGA (AR_WIDTH_VGA * AR_BYTES_PER_PIXEL) | |
| #define AR_LINE_BYTES_QVGA (AR_WIDTH_QVGA * AR_BYTES_PER_PIXEL) | |
| #define MAX_AR_LINE_BYTES AR_LINE_BYTES_VGA | |
| /* frame size & type */ | |
| #define AR_FRAME_BYTES_VGA \ | |
| (AR_WIDTH_VGA * AR_HEIGHT_VGA * AR_BYTES_PER_PIXEL) | |
| #define AR_FRAME_BYTES_QVGA \ | |
| (AR_WIDTH_QVGA * AR_HEIGHT_QVGA * AR_BYTES_PER_PIXEL) | |
| #define MAX_AR_FRAME_BYTES \ | |
| (MAX_AR_WIDTH * MAX_AR_HEIGHT * AR_BYTES_PER_PIXEL) | |
| #define AR_MAX_FRAME 15 | |
| /* capture size */ | |
| #define AR_SIZE_VGA 0 | |
| #define AR_SIZE_QVGA 1 | |
| /* capture mode */ | |
| #define AR_MODE_INTERLACE 0 | |
| #define AR_MODE_NORMAL 1 | |
| struct ar { | |
| struct v4l2_device v4l2_dev; | |
| struct video_device vdev; | |
| int start_capture; /* duaring capture in INT. mode. */ | |
| #if USE_INT | |
| unsigned char *line_buff; /* DMA line buffer */ | |
| #endif | |
| unsigned char *frame[MAX_AR_HEIGHT]; /* frame data */ | |
| short size; /* capture size */ | |
| short mode; /* capture mode */ | |
| int width, height; | |
| int frame_bytes, line_bytes; | |
| wait_queue_head_t wait; | |
| struct mutex lock; | |
| }; | |
| static struct ar ardev; | |
| static int video_nr = -1; /* video device number (first free) */ | |
| static unsigned char yuv[MAX_AR_FRAME_BYTES]; | |
| /* module parameters */ | |
| /* default frequency */ | |
| #define DEFAULT_FREQ 50 /* 50 or 75 (MHz) is available as BCLK */ | |
| static int freq = DEFAULT_FREQ; /* BCLK: available 50 or 70 (MHz) */ | |
| static int vga; /* default mode(0:QVGA mode, other:VGA mode) */ | |
| static int vga_interlace; /* 0 is normal mode for, else interlace mode */ | |
| module_param(freq, int, 0); | |
| module_param(vga, int, 0); | |
| module_param(vga_interlace, int, 0); | |
| static void wait_for_vsync(void) | |
| { | |
| while (ar_inl(ARVCR0) & ARVCR0_VDS) /* wait for VSYNC */ | |
| cpu_relax(); | |
| while (!(ar_inl(ARVCR0) & ARVCR0_VDS)) /* wait for VSYNC */ | |
| cpu_relax(); | |
| } | |
| static void wait_acknowledge(void) | |
| { | |
| int i; | |
| for (i = 0; i < 1000; i++) | |
| cpu_relax(); | |
| while (ar_inl(PLDI2CSTS) & PLDI2CSTS_NOACK) | |
| cpu_relax(); | |
| } | |
| /******************************************************************* | |
| * I2C functions | |
| *******************************************************************/ | |
| static void iic(int n, unsigned long addr, unsigned long data1, unsigned long data2, | |
| unsigned long data3) | |
| { | |
| int i; | |
| /* Slave Address */ | |
| ar_outl(addr, PLDI2CDATA); | |
| wait_for_vsync(); | |
| /* Start */ | |
| ar_outl(1, PLDI2CCND); | |
| wait_acknowledge(); | |
| /* Transfer data 1 */ | |
| ar_outl(data1, PLDI2CDATA); | |
| wait_for_vsync(); | |
| ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); | |
| wait_acknowledge(); | |
| /* Transfer data 2 */ | |
| ar_outl(data2, PLDI2CDATA); | |
| wait_for_vsync(); | |
| ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); | |
| wait_acknowledge(); | |
| if (n == 3) { | |
| /* Transfer data 3 */ | |
| ar_outl(data3, PLDI2CDATA); | |
| wait_for_vsync(); | |
| ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); | |
| wait_acknowledge(); | |
| } | |
| /* Stop */ | |
| for (i = 0; i < 100; i++) | |
| cpu_relax(); | |
| ar_outl(2, PLDI2CCND); | |
| ar_outl(2, PLDI2CCND); | |
| while (ar_inl(PLDI2CSTS) & PLDI2CSTS_BB) | |
| cpu_relax(); | |
| } | |
| static void init_iic(void) | |
| { | |
| DEBUG(1, "init_iic:\n"); | |
| /* | |
| * ICU Setting (iic) | |
| */ | |
| /* I2C Setting */ | |
| ar_outl(0x0, PLDI2CCR); /* I2CCR Disable */ | |
| ar_outl(0x0300, PLDI2CMOD); /* I2CMOD ACK/8b-data/7b-addr/auto */ | |
| ar_outl(0x1, PLDI2CACK); /* I2CACK ACK */ | |
| /* I2C CLK */ | |
| /* 50MH-100k */ | |
| if (freq == 75) | |
| ar_outl(369, PLDI2CFREQ); /* BCLK = 75MHz */ | |
| else if (freq == 50) | |
| ar_outl(244, PLDI2CFREQ); /* BCLK = 50MHz */ | |
| else | |
| ar_outl(244, PLDI2CFREQ); /* default: BCLK = 50MHz */ | |
| ar_outl(0x1, PLDI2CCR); /* I2CCR Enable */ | |
| } | |
| /************************************************************************** | |
| * | |
| * Video4Linux Interface functions | |
| * | |
| **************************************************************************/ | |
| static inline void disable_dma(void) | |
| { | |
| ar_outl(0x8000, M32R_DMAEN_PORTL); /* disable DMA0 */ | |
| } | |
| static inline void enable_dma(void) | |
| { | |
| ar_outl(0x8080, M32R_DMAEN_PORTL); /* enable DMA0 */ | |
| } | |
| static inline void clear_dma_status(void) | |
| { | |
| ar_outl(0x8000, M32R_DMAEDET_PORTL); /* clear status */ | |
| } | |
| static void wait_for_vertical_sync(struct ar *ar, int exp_line) | |
| { | |
| #if CHECK_LOST | |
| int tmout = 10000; /* FIXME */ | |
| int l; | |
| /* | |
| * check HCOUNT because we cannot check vertical sync. | |
| */ | |
| for (; tmout >= 0; tmout--) { | |
| l = ar_inl(ARVHCOUNT); | |
| if (l == exp_line) | |
| break; | |
| } | |
| if (tmout < 0) | |
| v4l2_err(&ar->v4l2_dev, "lost %d -> %d\n", exp_line, l); | |
| #else | |
| while (ar_inl(ARVHCOUNT) != exp_line) | |
| cpu_relax(); | |
| #endif | |
| } | |
| static ssize_t ar_read(struct file *file, char *buf, size_t count, loff_t *ppos) | |
| { | |
| struct ar *ar = video_drvdata(file); | |
| long ret = ar->frame_bytes; /* return read bytes */ | |
| unsigned long arvcr1 = 0; | |
| unsigned long flags; | |
| unsigned char *p; | |
| int h, w; | |
| unsigned char *py, *pu, *pv; | |
| #if !USE_INT | |
| int l; | |
| #endif | |
| DEBUG(1, "ar_read()\n"); | |
| if (ar->size == AR_SIZE_QVGA) | |
| arvcr1 |= ARVCR1_QVGA; | |
| if (ar->mode == AR_MODE_NORMAL) | |
| arvcr1 |= ARVCR1_NORMAL; | |
| mutex_lock(&ar->lock); | |
| #if USE_INT | |
| local_irq_save(flags); | |
| disable_dma(); | |
| ar_outl(0xa1871300, M32R_DMA0CR0_PORTL); | |
| ar_outl(0x01000000, M32R_DMA0CR1_PORTL); | |
| /* set AR FIFO address as source(BSEL5) */ | |
| ar_outl(ARDATA32, M32R_DMA0CSA_PORTL); | |
| ar_outl(ARDATA32, M32R_DMA0RSA_PORTL); | |
| ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); /* destination addr. */ | |
| ar_outl(ar->line_buff, M32R_DMA0RDA_PORTL); /* reload address */ | |
| ar_outl(ar->line_bytes, M32R_DMA0CBCUT_PORTL); /* byte count (bytes) */ | |
| ar_outl(ar->line_bytes, M32R_DMA0RBCUT_PORTL); /* reload count (bytes) */ | |
| /* | |
| * Okay, kick AR LSI to invoke an interrupt | |
| */ | |
| ar->start_capture = -1; | |
| ar_outl(arvcr1 | ARVCR1_HIEN, ARVCR1); | |
| local_irq_restore(flags); | |
| /* .... AR interrupts .... */ | |
| wait_event_interruptible(ar->wait, ar->start_capture == 0); | |
| if (signal_pending(current)) { | |
| printk(KERN_ERR "arv: interrupted while get frame data.\n"); | |
| ret = -EINTR; | |
| goto out_up; | |
| } | |
| #else /* ! USE_INT */ | |
| /* polling */ | |
| ar_outl(arvcr1, ARVCR1); | |
| disable_dma(); | |
| ar_outl(0x8000, M32R_DMAEDET_PORTL); | |
| ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); | |
| ar_outl(0x01000000, M32R_DMA0CR1_PORTL); | |
| ar_outl(ARDATA32, M32R_DMA0CSA_PORTL); | |
| ar_outl(ARDATA32, M32R_DMA0RSA_PORTL); | |
| ar_outl(ar->line_bytes, M32R_DMA0CBCUT_PORTL); | |
| ar_outl(ar->line_bytes, M32R_DMA0RBCUT_PORTL); | |
| local_irq_save(flags); | |
| while (ar_inl(ARVHCOUNT) != 0) /* wait for 0 */ | |
| cpu_relax(); | |
| if (ar->mode == AR_MODE_INTERLACE && ar->size == AR_SIZE_VGA) { | |
| for (h = 0; h < ar->height; h++) { | |
| wait_for_vertical_sync(ar, h); | |
| if (h < (AR_HEIGHT_VGA/2)) | |
| l = h << 1; | |
| else | |
| l = (((h - (AR_HEIGHT_VGA/2)) << 1) + 1); | |
| ar_outl(virt_to_phys(ar->frame[l]), M32R_DMA0CDA_PORTL); | |
| enable_dma(); | |
| while (!(ar_inl(M32R_DMAEDET_PORTL) & 0x8000)) | |
| cpu_relax(); | |
| disable_dma(); | |
| clear_dma_status(); | |
| ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); | |
| } | |
| } else { | |
| for (h = 0; h < ar->height; h++) { | |
| wait_for_vertical_sync(ar, h); | |
| ar_outl(virt_to_phys(ar->frame[h]), M32R_DMA0CDA_PORTL); | |
| enable_dma(); | |
| while (!(ar_inl(M32R_DMAEDET_PORTL) & 0x8000)) | |
| cpu_relax(); | |
| disable_dma(); | |
| clear_dma_status(); | |
| ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); | |
| } | |
| } | |
| local_irq_restore(flags); | |
| #endif /* ! USE_INT */ | |
| /* | |
| * convert YUV422 to YUV422P | |
| * +--------------------+ | |
| * | Y0,Y1,... | | |
| * | ..............Yn | | |
| * +--------------------+ | |
| * | U0,U1,........Un | | |
| * +--------------------+ | |
| * | V0,V1,........Vn | | |
| * +--------------------+ | |
| */ | |
| py = yuv; | |
| pu = py + (ar->frame_bytes / 2); | |
| pv = pu + (ar->frame_bytes / 4); | |
| for (h = 0; h < ar->height; h++) { | |
| p = ar->frame[h]; | |
| for (w = 0; w < ar->line_bytes; w += 4) { | |
| *py++ = *p++; | |
| *pu++ = *p++; | |
| *py++ = *p++; | |
| *pv++ = *p++; | |
| } | |
| } | |
| if (copy_to_user(buf, yuv, ar->frame_bytes)) { | |
| v4l2_err(&ar->v4l2_dev, "failed while copy_to_user yuv.\n"); | |
| ret = -EFAULT; | |
| goto out_up; | |
| } | |
| DEBUG(1, "ret = %d\n", ret); | |
| out_up: | |
| mutex_unlock(&ar->lock); | |
| return ret; | |
| } | |
| static int ar_querycap(struct file *file, void *priv, | |
| struct v4l2_capability *vcap) | |
| { | |
| struct ar *ar = video_drvdata(file); | |
| strlcpy(vcap->driver, ar->vdev.name, sizeof(vcap->driver)); | |
| strlcpy(vcap->card, "Colour AR VGA", sizeof(vcap->card)); | |
| strlcpy(vcap->bus_info, "Platform", sizeof(vcap->bus_info)); | |
| vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; | |
| vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; | |
| return 0; | |
| } | |
| static int ar_enum_input(struct file *file, void *fh, struct v4l2_input *vin) | |
| { | |
| if (vin->index > 0) | |
| return -EINVAL; | |
| strlcpy(vin->name, "Camera", sizeof(vin->name)); | |
| vin->type = V4L2_INPUT_TYPE_CAMERA; | |
| vin->audioset = 0; | |
| vin->tuner = 0; | |
| vin->std = V4L2_STD_ALL; | |
| vin->status = 0; | |
| return 0; | |
| } | |
| static int ar_g_input(struct file *file, void *fh, unsigned int *inp) | |
| { | |
| *inp = 0; | |
| return 0; | |
| } | |
| static int ar_s_input(struct file *file, void *fh, unsigned int inp) | |
| { | |
| return inp ? -EINVAL : 0; | |
| } | |
| static int ar_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) | |
| { | |
| struct ar *ar = video_drvdata(file); | |
| struct v4l2_pix_format *pix = &fmt->fmt.pix; | |
| pix->width = ar->width; | |
| pix->height = ar->height; | |
| pix->pixelformat = V4L2_PIX_FMT_YUV422P; | |
| pix->field = (ar->mode == AR_MODE_NORMAL) ? V4L2_FIELD_NONE : V4L2_FIELD_INTERLACED; | |
| pix->bytesperline = ar->width; | |
| pix->sizeimage = 2 * ar->width * ar->height; | |
| /* Just a guess */ | |
| pix->colorspace = V4L2_COLORSPACE_SMPTE170M; | |
| return 0; | |
| } | |
| static int ar_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) | |
| { | |
| struct ar *ar = video_drvdata(file); | |
| struct v4l2_pix_format *pix = &fmt->fmt.pix; | |
| if (pix->height <= AR_HEIGHT_QVGA || pix->width <= AR_WIDTH_QVGA) { | |
| pix->height = AR_HEIGHT_QVGA; | |
| pix->width = AR_WIDTH_QVGA; | |
| pix->field = V4L2_FIELD_INTERLACED; | |
| } else { | |
| pix->height = AR_HEIGHT_VGA; | |
| pix->width = AR_WIDTH_VGA; | |
| pix->field = vga_interlace ? V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE; | |
| } | |
| pix->pixelformat = V4L2_PIX_FMT_YUV422P; | |
| pix->bytesperline = ar->width; | |
| pix->sizeimage = 2 * ar->width * ar->height; | |
| /* Just a guess */ | |
| pix->colorspace = V4L2_COLORSPACE_SMPTE170M; | |
| return 0; | |
| } | |
| static int ar_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) | |
| { | |
| struct ar *ar = video_drvdata(file); | |
| struct v4l2_pix_format *pix = &fmt->fmt.pix; | |
| int ret = ar_try_fmt_vid_cap(file, fh, fmt); | |
| if (ret) | |
| return ret; | |
| mutex_lock(&ar->lock); | |
| ar->width = pix->width; | |
| ar->height = pix->height; | |
| if (ar->width == AR_WIDTH_VGA) { | |
| ar->size = AR_SIZE_VGA; | |
| ar->frame_bytes = AR_FRAME_BYTES_VGA; | |
| ar->line_bytes = AR_LINE_BYTES_VGA; | |
| if (vga_interlace) | |
| ar->mode = AR_MODE_INTERLACE; | |
| else | |
| ar->mode = AR_MODE_NORMAL; | |
| } else { | |
| ar->size = AR_SIZE_QVGA; | |
| ar->frame_bytes = AR_FRAME_BYTES_QVGA; | |
| ar->line_bytes = AR_LINE_BYTES_QVGA; | |
| ar->mode = AR_MODE_INTERLACE; | |
| } | |
| /* Ok we figured out what to use from our wide choice */ | |
| mutex_unlock(&ar->lock); | |
| return 0; | |
| } | |
| static int ar_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) | |
| { | |
| static struct v4l2_fmtdesc formats[] = { | |
| { 0, 0, 0, | |
| "YUV 4:2:2 Planar", V4L2_PIX_FMT_YUV422P, | |
| { 0, 0, 0, 0 } | |
| }, | |
| }; | |
| enum v4l2_buf_type type = fmt->type; | |
| if (fmt->index > 0) | |
| return -EINVAL; | |
| *fmt = formats[fmt->index]; | |
| fmt->type = type; | |
| return 0; | |
| } | |
| #if USE_INT | |
| /* | |
| * Interrupt handler | |
| */ | |
| static void ar_interrupt(int irq, void *dev) | |
| { | |
| struct ar *ar = dev; | |
| unsigned int line_count; | |
| unsigned int line_number; | |
| unsigned int arvcr1; | |
| line_count = ar_inl(ARVHCOUNT); /* line number */ | |
| if (ar->mode == AR_MODE_INTERLACE && ar->size == AR_SIZE_VGA) { | |
| /* operations for interlace mode */ | |
| if (line_count < (AR_HEIGHT_VGA / 2)) /* even line */ | |
| line_number = (line_count << 1); | |
| else /* odd line */ | |
| line_number = | |
| (((line_count - (AR_HEIGHT_VGA / 2)) << 1) + 1); | |
| } else { | |
| line_number = line_count; | |
| } | |
| if (line_number == 0) { | |
| /* | |
| * It is an interrupt for line 0. | |
| * we have to start capture. | |
| */ | |
| disable_dma(); | |
| #if 0 | |
| ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); /* needless? */ | |
| #endif | |
| memcpy(ar->frame[0], ar->line_buff, ar->line_bytes); | |
| #if 0 | |
| ar_outl(0xa1861300, M32R_DMA0CR0_PORTL); | |
| #endif | |
| enable_dma(); | |
| ar->start_capture = 1; /* during capture */ | |
| return; | |
| } | |
| if (ar->start_capture == 1 && line_number <= (ar->height - 1)) { | |
| disable_dma(); | |
| memcpy(ar->frame[line_number], ar->line_buff, ar->line_bytes); | |
| /* | |
| * if captured all line of a frame, disable AR interrupt | |
| * and wake a process up. | |
| */ | |
| if (line_number == (ar->height - 1)) { /* end of line */ | |
| ar->start_capture = 0; | |
| /* disable AR interrupt request */ | |
| arvcr1 = ar_inl(ARVCR1); | |
| arvcr1 &= ~ARVCR1_HIEN; /* clear int. flag */ | |
| ar_outl(arvcr1, ARVCR1); /* disable */ | |
| wake_up_interruptible(&ar->wait); | |
| } else { | |
| #if 0 | |
| ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); | |
| ar_outl(0xa1861300, M32R_DMA0CR0_PORTL); | |
| #endif | |
| enable_dma(); | |
| } | |
| } | |
| } | |
| #endif | |
| /* | |
| * ar_initialize() | |
| * ar_initialize() is called by video_register_device() and | |
| * initializes AR LSI and peripherals. | |
| * | |
| * -1 is returned in all failures. | |
| * 0 is returned in success. | |
| * | |
| */ | |
| static int ar_initialize(struct ar *ar) | |
| { | |
| unsigned long cr = 0; | |
| int i, found = 0; | |
| DEBUG(1, "ar_initialize:\n"); | |
| /* | |
| * initialize AR LSI | |
| */ | |
| ar_outl(0, ARVCR0); /* assert reset of AR LSI */ | |
| for (i = 0; i < 0x18; i++) /* wait for over 10 cycles @ 27MHz */ | |
| cpu_relax(); | |
| ar_outl(ARVCR0_RST, ARVCR0); /* negate reset of AR LSI (enable) */ | |
| for (i = 0; i < 0x40d; i++) /* wait for over 420 cycles @ 27MHz */ | |
| cpu_relax(); | |
| /* AR uses INT3 of CPU as interrupt pin. */ | |
| ar_outl(ARINTSEL_INT3, ARINTSEL); | |
| if (ar->size == AR_SIZE_QVGA) | |
| cr |= ARVCR1_QVGA; | |
| if (ar->mode == AR_MODE_NORMAL) | |
| cr |= ARVCR1_NORMAL; | |
| ar_outl(cr, ARVCR1); | |
| /* | |
| * Initialize IIC so that CPU can communicate with AR LSI, | |
| * and send boot commands to AR LSI. | |
| */ | |
| init_iic(); | |
| for (i = 0; i < 0x100000; i++) { /* > 0xa1d10, 56ms */ | |
| if ((ar_inl(ARVCR0) & ARVCR0_VDS)) { /* VSYNC */ | |
| found = 1; | |
| break; | |
| } | |
| } | |
| if (found == 0) | |
| return -ENODEV; | |
| v4l2_info(&ar->v4l2_dev, "Initializing "); | |
| iic(2, 0x78, 0x11, 0x01, 0x00); /* start */ | |
| iic(3, 0x78, 0x12, 0x00, 0x06); | |
| iic(3, 0x78, 0x12, 0x12, 0x30); | |
| iic(3, 0x78, 0x12, 0x15, 0x58); | |
| iic(3, 0x78, 0x12, 0x17, 0x30); | |
| printk(KERN_CONT "."); | |
| iic(3, 0x78, 0x12, 0x1a, 0x97); | |
| iic(3, 0x78, 0x12, 0x1b, 0xff); | |
| iic(3, 0x78, 0x12, 0x1c, 0xff); | |
| iic(3, 0x78, 0x12, 0x26, 0x10); | |
| iic(3, 0x78, 0x12, 0x27, 0x00); | |
| printk(KERN_CONT "."); | |
| iic(2, 0x78, 0x34, 0x02, 0x00); | |
| iic(2, 0x78, 0x7a, 0x10, 0x00); | |
| iic(2, 0x78, 0x80, 0x39, 0x00); | |
| iic(2, 0x78, 0x81, 0xe6, 0x00); | |
| iic(2, 0x78, 0x8d, 0x00, 0x00); | |
| printk(KERN_CONT "."); | |
| iic(2, 0x78, 0x8e, 0x0c, 0x00); | |
| iic(2, 0x78, 0x8f, 0x00, 0x00); | |
| #if 0 | |
| iic(2, 0x78, 0x90, 0x00, 0x00); /* AWB on=1 off=0 */ | |
| #endif | |
| iic(2, 0x78, 0x93, 0x01, 0x00); | |
| iic(2, 0x78, 0x94, 0xcd, 0x00); | |
| iic(2, 0x78, 0x95, 0x00, 0x00); | |
| printk(KERN_CONT "."); | |
| iic(2, 0x78, 0x96, 0xa0, 0x00); | |
| iic(2, 0x78, 0x97, 0x00, 0x00); | |
| iic(2, 0x78, 0x98, 0x60, 0x00); | |
| iic(2, 0x78, 0x99, 0x01, 0x00); | |
| iic(2, 0x78, 0x9a, 0x19, 0x00); | |
| printk(KERN_CONT "."); | |
| iic(2, 0x78, 0x9b, 0x02, 0x00); | |
| iic(2, 0x78, 0x9c, 0xe8, 0x00); | |
| iic(2, 0x78, 0x9d, 0x02, 0x00); | |
| iic(2, 0x78, 0x9e, 0x2e, 0x00); | |
| iic(2, 0x78, 0xb8, 0x78, 0x00); | |
| iic(2, 0x78, 0xba, 0x05, 0x00); | |
| #if 0 | |
| iic(2, 0x78, 0x83, 0x8c, 0x00); /* brightness */ | |
| #endif | |
| printk(KERN_CONT "."); | |
| /* color correction */ | |
| iic(3, 0x78, 0x49, 0x00, 0x95); /* a */ | |
| iic(3, 0x78, 0x49, 0x01, 0x96); /* b */ | |
| iic(3, 0x78, 0x49, 0x03, 0x85); /* c */ | |
| iic(3, 0x78, 0x49, 0x04, 0x97); /* d */ | |
| iic(3, 0x78, 0x49, 0x02, 0x7e); /* e(Lo) */ | |
| iic(3, 0x78, 0x49, 0x05, 0xa4); /* f(Lo) */ | |
| iic(3, 0x78, 0x49, 0x06, 0x04); /* e(Hi) */ | |
| iic(3, 0x78, 0x49, 0x07, 0x04); /* e(Hi) */ | |
| iic(2, 0x78, 0x48, 0x01, 0x00); /* on=1 off=0 */ | |
| printk(KERN_CONT "."); | |
| iic(2, 0x78, 0x11, 0x00, 0x00); /* end */ | |
| printk(KERN_CONT " done\n"); | |
| return 0; | |
| } | |
| /**************************************************************************** | |
| * | |
| * Video4Linux Module functions | |
| * | |
| ****************************************************************************/ | |
| static const struct v4l2_file_operations ar_fops = { | |
| .owner = THIS_MODULE, | |
| .open = v4l2_fh_open, | |
| .release = v4l2_fh_release, | |
| .read = ar_read, | |
| .unlocked_ioctl = video_ioctl2, | |
| }; | |
| static const struct v4l2_ioctl_ops ar_ioctl_ops = { | |
| .vidioc_querycap = ar_querycap, | |
| .vidioc_g_input = ar_g_input, | |
| .vidioc_s_input = ar_s_input, | |
| .vidioc_enum_input = ar_enum_input, | |
| .vidioc_enum_fmt_vid_cap = ar_enum_fmt_vid_cap, | |
| .vidioc_g_fmt_vid_cap = ar_g_fmt_vid_cap, | |
| .vidioc_s_fmt_vid_cap = ar_s_fmt_vid_cap, | |
| .vidioc_try_fmt_vid_cap = ar_try_fmt_vid_cap, | |
| }; | |
| #define ALIGN4(x) ((((int)(x)) & 0x3) == 0) | |
| static int __init ar_init(void) | |
| { | |
| struct ar *ar; | |
| struct v4l2_device *v4l2_dev; | |
| int ret; | |
| int i; | |
| ar = &ardev; | |
| v4l2_dev = &ar->v4l2_dev; | |
| strlcpy(v4l2_dev->name, "arv", sizeof(v4l2_dev->name)); | |
| v4l2_info(v4l2_dev, "Colour AR VGA driver %s\n", VERSION); | |
| ret = v4l2_device_register(NULL, v4l2_dev); | |
| if (ret < 0) { | |
| v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); | |
| return ret; | |
| } | |
| ret = -EIO; | |
| #if USE_INT | |
| /* allocate a DMA buffer for 1 line. */ | |
| ar->line_buff = kmalloc(MAX_AR_LINE_BYTES, GFP_KERNEL | GFP_DMA); | |
| if (ar->line_buff == NULL || !ALIGN4(ar->line_buff)) { | |
| v4l2_err(v4l2_dev, "buffer allocation failed for DMA.\n"); | |
| ret = -ENOMEM; | |
| goto out_end; | |
| } | |
| #endif | |
| /* allocate buffers for a frame */ | |
| for (i = 0; i < MAX_AR_HEIGHT; i++) { | |
| ar->frame[i] = kmalloc(MAX_AR_LINE_BYTES, GFP_KERNEL); | |
| if (ar->frame[i] == NULL || !ALIGN4(ar->frame[i])) { | |
| v4l2_err(v4l2_dev, "buffer allocation failed for frame.\n"); | |
| ret = -ENOMEM; | |
| goto out_line_buff; | |
| } | |
| } | |
| strlcpy(ar->vdev.name, "Colour AR VGA", sizeof(ar->vdev.name)); | |
| ar->vdev.v4l2_dev = v4l2_dev; | |
| ar->vdev.fops = &ar_fops; | |
| ar->vdev.ioctl_ops = &ar_ioctl_ops; | |
| ar->vdev.release = video_device_release_empty; | |
| video_set_drvdata(&ar->vdev, ar); | |
| if (vga) { | |
| ar->width = AR_WIDTH_VGA; | |
| ar->height = AR_HEIGHT_VGA; | |
| ar->size = AR_SIZE_VGA; | |
| ar->frame_bytes = AR_FRAME_BYTES_VGA; | |
| ar->line_bytes = AR_LINE_BYTES_VGA; | |
| if (vga_interlace) | |
| ar->mode = AR_MODE_INTERLACE; | |
| else | |
| ar->mode = AR_MODE_NORMAL; | |
| } else { | |
| ar->width = AR_WIDTH_QVGA; | |
| ar->height = AR_HEIGHT_QVGA; | |
| ar->size = AR_SIZE_QVGA; | |
| ar->frame_bytes = AR_FRAME_BYTES_QVGA; | |
| ar->line_bytes = AR_LINE_BYTES_QVGA; | |
| ar->mode = AR_MODE_INTERLACE; | |
| } | |
| mutex_init(&ar->lock); | |
| init_waitqueue_head(&ar->wait); | |
| #if USE_INT | |
| if (request_irq(M32R_IRQ_INT3, ar_interrupt, 0, "arv", ar)) { | |
| v4l2_err("request_irq(%d) failed.\n", M32R_IRQ_INT3); | |
| ret = -EIO; | |
| goto out_irq; | |
| } | |
| #endif | |
| if (ar_initialize(ar) != 0) { | |
| v4l2_err(v4l2_dev, "M64278 not found.\n"); | |
| ret = -ENODEV; | |
| goto out_dev; | |
| } | |
| /* | |
| * ok, we can initialize h/w according to parameters, | |
| * so register video device as a frame grabber type. | |
| * device is named "video[0-64]". | |
| * video_register_device() initializes h/w using ar_initialize(). | |
| */ | |
| if (video_register_device(&ar->vdev, VFL_TYPE_GRABBER, video_nr) != 0) { | |
| /* return -1, -ENFILE(full) or others */ | |
| v4l2_err(v4l2_dev, "register video (Colour AR) failed.\n"); | |
| ret = -ENODEV; | |
| goto out_dev; | |
| } | |
| v4l2_info(v4l2_dev, "%s: Found M64278 VGA (IRQ %d, Freq %dMHz).\n", | |
| video_device_node_name(&ar->vdev), M32R_IRQ_INT3, freq); | |
| return 0; | |
| out_dev: | |
| #if USE_INT | |
| free_irq(M32R_IRQ_INT3, ar); | |
| out_irq: | |
| #endif | |
| for (i = 0; i < MAX_AR_HEIGHT; i++) | |
| kfree(ar->frame[i]); | |
| out_line_buff: | |
| #if USE_INT | |
| kfree(ar->line_buff); | |
| out_end: | |
| #endif | |
| v4l2_device_unregister(&ar->v4l2_dev); | |
| return ret; | |
| } | |
| static int __init ar_init_module(void) | |
| { | |
| freq = (boot_cpu_data.bus_clock / 1000000); | |
| printk(KERN_INFO "arv: Bus clock %d\n", freq); | |
| if (freq != 50 && freq != 75) | |
| freq = DEFAULT_FREQ; | |
| return ar_init(); | |
| } | |
| static void __exit ar_cleanup_module(void) | |
| { | |
| struct ar *ar; | |
| int i; | |
| ar = &ardev; | |
| video_unregister_device(&ar->vdev); | |
| #if USE_INT | |
| free_irq(M32R_IRQ_INT3, ar); | |
| #endif | |
| for (i = 0; i < MAX_AR_HEIGHT; i++) | |
| kfree(ar->frame[i]); | |
| #if USE_INT | |
| kfree(ar->line_buff); | |
| #endif | |
| v4l2_device_unregister(&ar->v4l2_dev); | |
| } | |
| module_init(ar_init_module); | |
| module_exit(ar_cleanup_module); | |
| MODULE_AUTHOR("Takeo Takahashi <takahashi.takeo@renesas.com>"); | |
| MODULE_DESCRIPTION("Colour AR M64278(VGA) for Video4Linux"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION(VERSION); |