| /* | |
| * Copyright 2017 Google Inc | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| * | |
| * Provides a simple driver to control the ASPEED LPC snoop interface which | |
| * allows the BMC to listen on and save the data written by | |
| * the host to an arbitrary LPC I/O port. | |
| * | |
| * Typically used by the BMC to "watch" host boot progress via port | |
| * 0x80 writes made by the BIOS during the boot process. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kfifo.h> | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #define DEVICE_NAME "aspeed-lpc-snoop" | |
| #define NUM_SNOOP_CHANNELS 2 | |
| #define SNOOP_FIFO_SIZE 2048 | |
| #define HICR5 0x0 | |
| #define HICR5_EN_SNP0W BIT(0) | |
| #define HICR5_ENINT_SNP0W BIT(1) | |
| #define HICR5_EN_SNP1W BIT(2) | |
| #define HICR5_ENINT_SNP1W BIT(3) | |
| #define HICR6 0x4 | |
| #define HICR6_STR_SNP0W BIT(0) | |
| #define HICR6_STR_SNP1W BIT(1) | |
| #define SNPWADR 0x10 | |
| #define SNPWADR_CH0_MASK GENMASK(15, 0) | |
| #define SNPWADR_CH0_SHIFT 0 | |
| #define SNPWADR_CH1_MASK GENMASK(31, 16) | |
| #define SNPWADR_CH1_SHIFT 16 | |
| #define SNPWDR 0x14 | |
| #define SNPWDR_CH0_MASK GENMASK(7, 0) | |
| #define SNPWDR_CH0_SHIFT 0 | |
| #define SNPWDR_CH1_MASK GENMASK(15, 8) | |
| #define SNPWDR_CH1_SHIFT 8 | |
| #define HICRB 0x80 | |
| #define HICRB_ENSNP0D BIT(14) | |
| #define HICRB_ENSNP1D BIT(15) | |
| struct aspeed_lpc_snoop_model_data { | |
| /* The ast2400 has bits 14 and 15 as reserved, whereas the ast2500 | |
| * can use them. | |
| */ | |
| unsigned int has_hicrb_ensnp; | |
| }; | |
| struct aspeed_lpc_snoop { | |
| struct regmap *regmap; | |
| int irq; | |
| struct kfifo snoop_fifo[NUM_SNOOP_CHANNELS]; | |
| }; | |
| /* Save a byte to a FIFO and discard the oldest byte if FIFO is full */ | |
| static void put_fifo_with_discard(struct kfifo *fifo, u8 val) | |
| { | |
| if (!kfifo_initialized(fifo)) | |
| return; | |
| if (kfifo_is_full(fifo)) | |
| kfifo_skip(fifo); | |
| kfifo_put(fifo, val); | |
| } | |
| static irqreturn_t aspeed_lpc_snoop_irq(int irq, void *arg) | |
| { | |
| struct aspeed_lpc_snoop *lpc_snoop = arg; | |
| u32 reg, data; | |
| if (regmap_read(lpc_snoop->regmap, HICR6, ®)) | |
| return IRQ_NONE; | |
| /* Check if one of the snoop channels is interrupting */ | |
| reg &= (HICR6_STR_SNP0W | HICR6_STR_SNP1W); | |
| if (!reg) | |
| return IRQ_NONE; | |
| /* Ack pending IRQs */ | |
| regmap_write(lpc_snoop->regmap, HICR6, reg); | |
| /* Read and save most recent snoop'ed data byte to FIFO */ | |
| regmap_read(lpc_snoop->regmap, SNPWDR, &data); | |
| if (reg & HICR6_STR_SNP0W) { | |
| u8 val = (data & SNPWDR_CH0_MASK) >> SNPWDR_CH0_SHIFT; | |
| put_fifo_with_discard(&lpc_snoop->snoop_fifo[0], val); | |
| } | |
| if (reg & HICR6_STR_SNP1W) { | |
| u8 val = (data & SNPWDR_CH1_MASK) >> SNPWDR_CH1_SHIFT; | |
| put_fifo_with_discard(&lpc_snoop->snoop_fifo[1], val); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int aspeed_lpc_snoop_config_irq(struct aspeed_lpc_snoop *lpc_snoop, | |
| struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| int rc; | |
| lpc_snoop->irq = platform_get_irq(pdev, 0); | |
| if (!lpc_snoop->irq) | |
| return -ENODEV; | |
| rc = devm_request_irq(dev, lpc_snoop->irq, | |
| aspeed_lpc_snoop_irq, IRQF_SHARED, | |
| DEVICE_NAME, lpc_snoop); | |
| if (rc < 0) { | |
| dev_warn(dev, "Unable to request IRQ %d\n", lpc_snoop->irq); | |
| lpc_snoop->irq = 0; | |
| return rc; | |
| } | |
| return 0; | |
| } | |
| static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop, | |
| struct device *dev, | |
| int channel, u16 lpc_port) | |
| { | |
| int rc = 0; | |
| u32 hicr5_en, snpwadr_mask, snpwadr_shift, hicrb_en; | |
| const struct aspeed_lpc_snoop_model_data *model_data = | |
| of_device_get_match_data(dev); | |
| /* Create FIFO datastructure */ | |
| rc = kfifo_alloc(&lpc_snoop->snoop_fifo[channel], | |
| SNOOP_FIFO_SIZE, GFP_KERNEL); | |
| if (rc) | |
| return rc; | |
| /* Enable LPC snoop channel at requested port */ | |
| switch (channel) { | |
| case 0: | |
| hicr5_en = HICR5_EN_SNP0W | HICR5_ENINT_SNP0W; | |
| snpwadr_mask = SNPWADR_CH0_MASK; | |
| snpwadr_shift = SNPWADR_CH0_SHIFT; | |
| hicrb_en = HICRB_ENSNP0D; | |
| break; | |
| case 1: | |
| hicr5_en = HICR5_EN_SNP1W | HICR5_ENINT_SNP1W; | |
| snpwadr_mask = SNPWADR_CH1_MASK; | |
| snpwadr_shift = SNPWADR_CH1_SHIFT; | |
| hicrb_en = HICRB_ENSNP1D; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en); | |
| regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask, | |
| lpc_port << snpwadr_shift); | |
| if (model_data->has_hicrb_ensnp) | |
| regmap_update_bits(lpc_snoop->regmap, HICRB, | |
| hicrb_en, hicrb_en); | |
| return rc; | |
| } | |
| static void aspeed_lpc_disable_snoop(struct aspeed_lpc_snoop *lpc_snoop, | |
| int channel) | |
| { | |
| switch (channel) { | |
| case 0: | |
| regmap_update_bits(lpc_snoop->regmap, HICR5, | |
| HICR5_EN_SNP0W | HICR5_ENINT_SNP0W, | |
| 0); | |
| break; | |
| case 1: | |
| regmap_update_bits(lpc_snoop->regmap, HICR5, | |
| HICR5_EN_SNP1W | HICR5_ENINT_SNP1W, | |
| 0); | |
| break; | |
| default: | |
| return; | |
| } | |
| kfifo_free(&lpc_snoop->snoop_fifo[channel]); | |
| } | |
| static int aspeed_lpc_snoop_probe(struct platform_device *pdev) | |
| { | |
| struct aspeed_lpc_snoop *lpc_snoop; | |
| struct device *dev; | |
| u32 port; | |
| int rc; | |
| dev = &pdev->dev; | |
| lpc_snoop = devm_kzalloc(dev, sizeof(*lpc_snoop), GFP_KERNEL); | |
| if (!lpc_snoop) | |
| return -ENOMEM; | |
| lpc_snoop->regmap = syscon_node_to_regmap( | |
| pdev->dev.parent->of_node); | |
| if (IS_ERR(lpc_snoop->regmap)) { | |
| dev_err(dev, "Couldn't get regmap\n"); | |
| return -ENODEV; | |
| } | |
| dev_set_drvdata(&pdev->dev, lpc_snoop); | |
| rc = of_property_read_u32_index(dev->of_node, "snoop-ports", 0, &port); | |
| if (rc) { | |
| dev_err(dev, "no snoop ports configured\n"); | |
| return -ENODEV; | |
| } | |
| rc = aspeed_lpc_snoop_config_irq(lpc_snoop, pdev); | |
| if (rc) | |
| return rc; | |
| rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port); | |
| if (rc) | |
| return rc; | |
| /* Configuration of 2nd snoop channel port is optional */ | |
| if (of_property_read_u32_index(dev->of_node, "snoop-ports", | |
| 1, &port) == 0) { | |
| rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port); | |
| if (rc) | |
| aspeed_lpc_disable_snoop(lpc_snoop, 0); | |
| } | |
| return rc; | |
| } | |
| static int aspeed_lpc_snoop_remove(struct platform_device *pdev) | |
| { | |
| struct aspeed_lpc_snoop *lpc_snoop = dev_get_drvdata(&pdev->dev); | |
| /* Disable both snoop channels */ | |
| aspeed_lpc_disable_snoop(lpc_snoop, 0); | |
| aspeed_lpc_disable_snoop(lpc_snoop, 1); | |
| return 0; | |
| } | |
| static const struct aspeed_lpc_snoop_model_data ast2400_model_data = { | |
| .has_hicrb_ensnp = 0, | |
| }; | |
| static const struct aspeed_lpc_snoop_model_data ast2500_model_data = { | |
| .has_hicrb_ensnp = 1, | |
| }; | |
| static const struct of_device_id aspeed_lpc_snoop_match[] = { | |
| { .compatible = "aspeed,ast2400-lpc-snoop", | |
| .data = &ast2400_model_data }, | |
| { .compatible = "aspeed,ast2500-lpc-snoop", | |
| .data = &ast2500_model_data }, | |
| { }, | |
| }; | |
| static struct platform_driver aspeed_lpc_snoop_driver = { | |
| .driver = { | |
| .name = DEVICE_NAME, | |
| .of_match_table = aspeed_lpc_snoop_match, | |
| }, | |
| .probe = aspeed_lpc_snoop_probe, | |
| .remove = aspeed_lpc_snoop_remove, | |
| }; | |
| module_platform_driver(aspeed_lpc_snoop_driver); | |
| MODULE_DEVICE_TABLE(of, aspeed_lpc_snoop_match); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Robert Lippert <rlippert@google.com>"); | |
| MODULE_DESCRIPTION("Linux driver to control Aspeed LPC snoop functionality"); |