| /* | |
| * This is for all the tests related to logic bugs (e.g. bad dereferences, | |
| * bad alignment, bad loops, bad locking, bad scheduling, deep stacks, and | |
| * lockups) along with other things that don't fit well into existing LKDTM | |
| * test source files. | |
| */ | |
| #include "lkdtm.h" | |
| #include <linux/list.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/uaccess.h> | |
| struct lkdtm_list { | |
| struct list_head node; | |
| }; | |
| /* | |
| * Make sure our attempts to over run the kernel stack doesn't trigger | |
| * a compiler warning when CONFIG_FRAME_WARN is set. Then make sure we | |
| * recurse past the end of THREAD_SIZE by default. | |
| */ | |
| #if defined(CONFIG_FRAME_WARN) && (CONFIG_FRAME_WARN > 0) | |
| #define REC_STACK_SIZE (CONFIG_FRAME_WARN / 2) | |
| #else | |
| #define REC_STACK_SIZE (THREAD_SIZE / 8) | |
| #endif | |
| #define REC_NUM_DEFAULT ((THREAD_SIZE / REC_STACK_SIZE) * 2) | |
| static int recur_count = REC_NUM_DEFAULT; | |
| static DEFINE_SPINLOCK(lock_me_up); | |
| static int recursive_loop(int remaining) | |
| { | |
| char buf[REC_STACK_SIZE]; | |
| /* Make sure compiler does not optimize this away. */ | |
| memset(buf, (remaining & 0xff) | 0x1, REC_STACK_SIZE); | |
| if (!remaining) | |
| return 0; | |
| else | |
| return recursive_loop(remaining - 1); | |
| } | |
| /* If the depth is negative, use the default, otherwise keep parameter. */ | |
| void __init lkdtm_bugs_init(int *recur_param) | |
| { | |
| if (*recur_param < 0) | |
| *recur_param = recur_count; | |
| else | |
| recur_count = *recur_param; | |
| } | |
| void lkdtm_PANIC(void) | |
| { | |
| panic("dumptest"); | |
| } | |
| void lkdtm_BUG(void) | |
| { | |
| BUG(); | |
| } | |
| void lkdtm_WARNING(void) | |
| { | |
| WARN_ON(1); | |
| } | |
| void lkdtm_EXCEPTION(void) | |
| { | |
| *((volatile int *) 0) = 0; | |
| } | |
| void lkdtm_LOOP(void) | |
| { | |
| for (;;) | |
| ; | |
| } | |
| void lkdtm_OVERFLOW(void) | |
| { | |
| (void) recursive_loop(recur_count); | |
| } | |
| static noinline void __lkdtm_CORRUPT_STACK(void *stack) | |
| { | |
| memset(stack, '\xff', 64); | |
| } | |
| /* This should trip the stack canary, not corrupt the return address. */ | |
| noinline void lkdtm_CORRUPT_STACK(void) | |
| { | |
| /* Use default char array length that triggers stack protection. */ | |
| char data[8] __aligned(sizeof(void *)); | |
| __lkdtm_CORRUPT_STACK(&data); | |
| pr_info("Corrupted stack containing char array ...\n"); | |
| } | |
| /* Same as above but will only get a canary with -fstack-protector-strong */ | |
| noinline void lkdtm_CORRUPT_STACK_STRONG(void) | |
| { | |
| union { | |
| unsigned short shorts[4]; | |
| unsigned long *ptr; | |
| } data __aligned(sizeof(void *)); | |
| __lkdtm_CORRUPT_STACK(&data); | |
| pr_info("Corrupted stack containing union ...\n"); | |
| } | |
| void lkdtm_UNALIGNED_LOAD_STORE_WRITE(void) | |
| { | |
| static u8 data[5] __attribute__((aligned(4))) = {1, 2, 3, 4, 5}; | |
| u32 *p; | |
| u32 val = 0x12345678; | |
| p = (u32 *)(data + 1); | |
| if (*p == 0) | |
| val = 0x87654321; | |
| *p = val; | |
| } | |
| void lkdtm_SOFTLOCKUP(void) | |
| { | |
| preempt_disable(); | |
| for (;;) | |
| cpu_relax(); | |
| } | |
| void lkdtm_HARDLOCKUP(void) | |
| { | |
| local_irq_disable(); | |
| for (;;) | |
| cpu_relax(); | |
| } | |
| void lkdtm_SPINLOCKUP(void) | |
| { | |
| /* Must be called twice to trigger. */ | |
| spin_lock(&lock_me_up); | |
| /* Let sparse know we intended to exit holding the lock. */ | |
| __release(&lock_me_up); | |
| } | |
| void lkdtm_HUNG_TASK(void) | |
| { | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| schedule(); | |
| } | |
| void lkdtm_CORRUPT_LIST_ADD(void) | |
| { | |
| /* | |
| * Initially, an empty list via LIST_HEAD: | |
| * test_head.next = &test_head | |
| * test_head.prev = &test_head | |
| */ | |
| LIST_HEAD(test_head); | |
| struct lkdtm_list good, bad; | |
| void *target[2] = { }; | |
| void *redirection = ⌖ | |
| pr_info("attempting good list addition\n"); | |
| /* | |
| * Adding to the list performs these actions: | |
| * test_head.next->prev = &good.node | |
| * good.node.next = test_head.next | |
| * good.node.prev = test_head | |
| * test_head.next = good.node | |
| */ | |
| list_add(&good.node, &test_head); | |
| pr_info("attempting corrupted list addition\n"); | |
| /* | |
| * In simulating this "write what where" primitive, the "what" is | |
| * the address of &bad.node, and the "where" is the address held | |
| * by "redirection". | |
| */ | |
| test_head.next = redirection; | |
| list_add(&bad.node, &test_head); | |
| if (target[0] == NULL && target[1] == NULL) | |
| pr_err("Overwrite did not happen, but no BUG?!\n"); | |
| else | |
| pr_err("list_add() corruption not detected!\n"); | |
| } | |
| void lkdtm_CORRUPT_LIST_DEL(void) | |
| { | |
| LIST_HEAD(test_head); | |
| struct lkdtm_list item; | |
| void *target[2] = { }; | |
| void *redirection = ⌖ | |
| list_add(&item.node, &test_head); | |
| pr_info("attempting good list removal\n"); | |
| list_del(&item.node); | |
| pr_info("attempting corrupted list removal\n"); | |
| list_add(&item.node, &test_head); | |
| /* As with the list_add() test above, this corrupts "next". */ | |
| item.node.next = redirection; | |
| list_del(&item.node); | |
| if (target[0] == NULL && target[1] == NULL) | |
| pr_err("Overwrite did not happen, but no BUG?!\n"); | |
| else | |
| pr_err("list_del() corruption not detected!\n"); | |
| } | |
| /* Test if unbalanced set_fs(KERNEL_DS)/set_fs(USER_DS) check exists. */ | |
| void lkdtm_CORRUPT_USER_DS(void) | |
| { | |
| pr_info("setting bad task size limit\n"); | |
| set_fs(KERNEL_DS); | |
| /* Make sure we do not keep running with a KERNEL_DS! */ | |
| force_sig(SIGKILL, current); | |
| } | |
| /* Test that VMAP_STACK is actually allocating with a leading guard page */ | |
| void lkdtm_STACK_GUARD_PAGE_LEADING(void) | |
| { | |
| const unsigned char *stack = task_stack_page(current); | |
| const unsigned char *ptr = stack - 1; | |
| volatile unsigned char byte; | |
| pr_info("attempting bad read from page below current stack\n"); | |
| byte = *ptr; | |
| pr_err("FAIL: accessed page before stack!\n"); | |
| } | |
| /* Test that VMAP_STACK is actually allocating with a trailing guard page */ | |
| void lkdtm_STACK_GUARD_PAGE_TRAILING(void) | |
| { | |
| const unsigned char *stack = task_stack_page(current); | |
| const unsigned char *ptr = stack + THREAD_SIZE; | |
| volatile unsigned char byte; | |
| pr_info("attempting bad read from page above current stack\n"); | |
| byte = *ptr; | |
| pr_err("FAIL: accessed page after stack!\n"); | |
| } |