| /* | |
| * Intel MIC Platform Software Stack (MPSS) | |
| * | |
| * This file is provided under a dual BSD/GPLv2 license. When using or | |
| * redistributing this file, you may do so under either license. | |
| * | |
| * GPL LICENSE SUMMARY | |
| * | |
| * Copyright(c) 2014 Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of version 2 of the GNU General Public License as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * BSD LICENSE | |
| * | |
| * Copyright(c) 2014 Intel Corporation. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * * Neither the name of Intel Corporation nor the names of its | |
| * contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * Intel SCIF driver. | |
| * | |
| */ | |
| #ifndef SCIF_NODEQP | |
| #define SCIF_NODEQP | |
| #include "scif_rb.h" | |
| #include "scif_peer_bus.h" | |
| #define SCIF_INIT 1 /* First message sent to the peer node for discovery */ | |
| #define SCIF_EXIT 2 /* Last message from the peer informing intent to exit */ | |
| #define SCIF_EXIT_ACK 3 /* Response to SCIF_EXIT message */ | |
| #define SCIF_NODE_ADD 4 /* Tell Online nodes a new node exits */ | |
| #define SCIF_NODE_ADD_ACK 5 /* Confirm to mgmt node sequence is finished */ | |
| #define SCIF_NODE_ADD_NACK 6 /* SCIF_NODE_ADD failed */ | |
| #define SCIF_NODE_REMOVE 7 /* Request to deactivate a SCIF node */ | |
| #define SCIF_NODE_REMOVE_ACK 8 /* Response to a SCIF_NODE_REMOVE message */ | |
| #define SCIF_CNCT_REQ 9 /* Phys addr of Request connection to a port */ | |
| #define SCIF_CNCT_GNT 10 /* Phys addr of new Grant connection request */ | |
| #define SCIF_CNCT_GNTACK 11 /* Error type Reject a connection request */ | |
| #define SCIF_CNCT_GNTNACK 12 /* Error type Reject a connection request */ | |
| #define SCIF_CNCT_REJ 13 /* Error type Reject a connection request */ | |
| #define SCIF_DISCNCT 14 /* Notify peer that connection is being terminated */ | |
| #define SCIF_DISCNT_ACK 15 /* Notify peer that connection is being terminated */ | |
| #define SCIF_CLIENT_SENT 16 /* Notify the peer that data has been written */ | |
| #define SCIF_CLIENT_RCVD 17 /* Notify the peer that data has been read */ | |
| #define SCIF_GET_NODE_INFO 18 /* Get current node mask from the mgmt node*/ | |
| #define SCIF_REGISTER 19 /* Tell peer about a new registered window */ | |
| #define SCIF_REGISTER_ACK 20 /* Notify peer about unregistration success */ | |
| #define SCIF_REGISTER_NACK 21 /* Notify peer about registration success */ | |
| #define SCIF_UNREGISTER 22 /* Tell peer about unregistering a window */ | |
| #define SCIF_UNREGISTER_ACK 23 /* Notify peer about registration failure */ | |
| #define SCIF_UNREGISTER_NACK 24 /* Notify peer about unregistration failure */ | |
| #define SCIF_ALLOC_REQ 25 /* Request a mapped buffer */ | |
| #define SCIF_ALLOC_GNT 26 /* Notify peer about allocation success */ | |
| #define SCIF_ALLOC_REJ 27 /* Notify peer about allocation failure */ | |
| #define SCIF_FREE_VIRT 28 /* Free previously allocated virtual memory */ | |
| #define SCIF_MUNMAP 29 /* Acknowledgment for a SCIF_MMAP request */ | |
| #define SCIF_MARK 30 /* SCIF Remote Fence Mark Request */ | |
| #define SCIF_MARK_ACK 31 /* SCIF Remote Fence Mark Success */ | |
| #define SCIF_MARK_NACK 32 /* SCIF Remote Fence Mark Failure */ | |
| #define SCIF_WAIT 33 /* SCIF Remote Fence Wait Request */ | |
| #define SCIF_WAIT_ACK 34 /* SCIF Remote Fence Wait Success */ | |
| #define SCIF_WAIT_NACK 35 /* SCIF Remote Fence Wait Failure */ | |
| #define SCIF_SIG_LOCAL 36 /* SCIF Remote Fence Local Signal Request */ | |
| #define SCIF_SIG_REMOTE 37 /* SCIF Remote Fence Remote Signal Request */ | |
| #define SCIF_SIG_ACK 38 /* SCIF Remote Fence Remote Signal Success */ | |
| #define SCIF_SIG_NACK 39 /* SCIF Remote Fence Remote Signal Failure */ | |
| #define SCIF_MAX_MSG SCIF_SIG_NACK | |
| /* | |
| * struct scifmsg - Node QP message format | |
| * | |
| * @src: Source information | |
| * @dst: Destination information | |
| * @uop: The message opcode | |
| * @payload: Unique payload format for each message | |
| */ | |
| struct scifmsg { | |
| struct scif_port_id src; | |
| struct scif_port_id dst; | |
| u32 uop; | |
| u64 payload[4]; | |
| } __packed; | |
| /* | |
| * struct scif_allocmsg - Used with SCIF_ALLOC_REQ to request | |
| * the remote note to allocate memory | |
| * | |
| * phys_addr: Physical address of the buffer | |
| * vaddr: Virtual address of the buffer | |
| * size: Size of the buffer | |
| * state: Current state | |
| * allocwq: wait queue for status | |
| */ | |
| struct scif_allocmsg { | |
| dma_addr_t phys_addr; | |
| unsigned long vaddr; | |
| size_t size; | |
| enum scif_msg_state state; | |
| wait_queue_head_t allocwq; | |
| }; | |
| /* | |
| * struct scif_qp - Node Queue Pair | |
| * | |
| * Interesting structure -- a little difficult because we can only | |
| * write across the PCIe, so any r/w pointer we need to read is | |
| * local. We only need to read the read pointer on the inbound_q | |
| * and read the write pointer in the outbound_q | |
| * | |
| * @magic: Magic value to ensure the peer sees the QP correctly | |
| * @outbound_q: The outbound ring buffer for sending messages | |
| * @inbound_q: The inbound ring buffer for receiving messages | |
| * @local_write: Local write index | |
| * @local_read: Local read index | |
| * @remote_qp: The remote queue pair | |
| * @local_buf: DMA address of local ring buffer | |
| * @local_qp: DMA address of the local queue pair data structure | |
| * @remote_buf: DMA address of remote ring buffer | |
| * @qp_state: QP state i.e. online or offline used for P2P | |
| * @send_lock: synchronize access to outbound queue | |
| * @recv_lock: Synchronize access to inbound queue | |
| */ | |
| struct scif_qp { | |
| u64 magic; | |
| #define SCIFEP_MAGIC 0x5c1f000000005c1fULL | |
| struct scif_rb outbound_q; | |
| struct scif_rb inbound_q; | |
| u32 local_write __aligned(64); | |
| u32 local_read __aligned(64); | |
| struct scif_qp *remote_qp; | |
| dma_addr_t local_buf; | |
| dma_addr_t local_qp; | |
| dma_addr_t remote_buf; | |
| u32 qp_state; | |
| #define SCIF_QP_OFFLINE 0xdead | |
| #define SCIF_QP_ONLINE 0xc0de | |
| spinlock_t send_lock; | |
| spinlock_t recv_lock; | |
| }; | |
| /* | |
| * struct scif_loopb_msg - An element in the loopback Node QP message list. | |
| * | |
| * @msg - The SCIF node QP message | |
| * @list - link in the list of messages | |
| */ | |
| struct scif_loopb_msg { | |
| struct scifmsg msg; | |
| struct list_head list; | |
| }; | |
| int scif_nodeqp_send(struct scif_dev *scifdev, struct scifmsg *msg); | |
| int _scif_nodeqp_send(struct scif_dev *scifdev, struct scifmsg *msg); | |
| void scif_nodeqp_intrhandler(struct scif_dev *scifdev, struct scif_qp *qp); | |
| int scif_loopb_msg_handler(struct scif_dev *scifdev, struct scif_qp *qp); | |
| int scif_setup_qp(struct scif_dev *scifdev); | |
| int scif_qp_response(phys_addr_t phys, struct scif_dev *dev); | |
| int scif_setup_qp_connect(struct scif_qp *qp, dma_addr_t *qp_offset, | |
| int local_size, struct scif_dev *scifdev); | |
| int scif_setup_qp_accept(struct scif_qp *qp, dma_addr_t *qp_offset, | |
| dma_addr_t phys, int local_size, | |
| struct scif_dev *scifdev); | |
| int scif_setup_qp_connect_response(struct scif_dev *scifdev, | |
| struct scif_qp *qp, u64 payload); | |
| int scif_setup_loopback_qp(struct scif_dev *scifdev); | |
| int scif_destroy_loopback_qp(struct scif_dev *scifdev); | |
| void scif_poll_qp_state(struct work_struct *work); | |
| void scif_destroy_p2p(struct scif_dev *scifdev); | |
| void scif_send_exit(struct scif_dev *scifdev); | |
| static inline struct device *scif_get_peer_dev(struct scif_dev *scifdev) | |
| { | |
| struct scif_peer_dev *spdev; | |
| struct device *spdev_ret; | |
| rcu_read_lock(); | |
| spdev = rcu_dereference(scifdev->spdev); | |
| if (spdev) | |
| spdev_ret = get_device(&spdev->dev); | |
| else | |
| spdev_ret = ERR_PTR(-ENODEV); | |
| rcu_read_unlock(); | |
| return spdev_ret; | |
| } | |
| static inline void scif_put_peer_dev(struct device *dev) | |
| { | |
| put_device(dev); | |
| } | |
| #endif /* SCIF_NODEQP */ |