| /* SocketCAN driver for Microchip CAN BUS Analyzer Tool | |
| * | |
| * Copyright (C) 2017 Mobica Limited | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published | |
| * by the Free Software Foundation; version 2 of the License. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program. | |
| * | |
| * This driver is inspired by the 4.6.2 version of net/can/usb/usb_8dev.c | |
| */ | |
| #include <asm/unaligned.h> | |
| #include <linux/can.h> | |
| #include <linux/can/dev.h> | |
| #include <linux/can/error.h> | |
| #include <linux/can/led.h> | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/signal.h> | |
| #include <linux/slab.h> | |
| #include <linux/usb.h> | |
| /* vendor and product id */ | |
| #define MCBA_MODULE_NAME "mcba_usb" | |
| #define MCBA_VENDOR_ID 0x04d8 | |
| #define MCBA_PRODUCT_ID 0x0a30 | |
| /* driver constants */ | |
| #define MCBA_MAX_RX_URBS 20 | |
| #define MCBA_MAX_TX_URBS 20 | |
| #define MCBA_CTX_FREE MCBA_MAX_TX_URBS | |
| /* RX buffer must be bigger than msg size since at the | |
| * beggining USB messages are stacked. | |
| */ | |
| #define MCBA_USB_RX_BUFF_SIZE 64 | |
| #define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg)) | |
| /* MCBA endpoint numbers */ | |
| #define MCBA_USB_EP_IN 1 | |
| #define MCBA_USB_EP_OUT 1 | |
| /* Microchip command id */ | |
| #define MBCA_CMD_RECEIVE_MESSAGE 0xE3 | |
| #define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5 | |
| #define MBCA_CMD_I_AM_ALIVE_FROM_USB 0xF7 | |
| #define MBCA_CMD_CHANGE_BIT_RATE 0xA1 | |
| #define MBCA_CMD_TRANSMIT_MESSAGE_EV 0xA3 | |
| #define MBCA_CMD_SETUP_TERMINATION_RESISTANCE 0xA8 | |
| #define MBCA_CMD_READ_FW_VERSION 0xA9 | |
| #define MBCA_CMD_NOTHING_TO_SEND 0xFF | |
| #define MBCA_CMD_TRANSMIT_MESSAGE_RSP 0xE2 | |
| #define MCBA_VER_REQ_USB 1 | |
| #define MCBA_VER_REQ_CAN 2 | |
| #define MCBA_SIDL_EXID_MASK 0x8 | |
| #define MCBA_DLC_MASK 0xf | |
| #define MCBA_DLC_RTR_MASK 0x40 | |
| #define MCBA_CAN_STATE_WRN_TH 95 | |
| #define MCBA_CAN_STATE_ERR_PSV_TH 127 | |
| #define MCBA_TERMINATION_DISABLED CAN_TERMINATION_DISABLED | |
| #define MCBA_TERMINATION_ENABLED 120 | |
| struct mcba_usb_ctx { | |
| struct mcba_priv *priv; | |
| u32 ndx; | |
| u8 dlc; | |
| bool can; | |
| }; | |
| /* Structure to hold all of our device specific stuff */ | |
| struct mcba_priv { | |
| struct can_priv can; /* must be the first member */ | |
| struct sk_buff *echo_skb[MCBA_MAX_TX_URBS]; | |
| struct mcba_usb_ctx tx_context[MCBA_MAX_TX_URBS]; | |
| struct usb_device *udev; | |
| struct net_device *netdev; | |
| struct usb_anchor tx_submitted; | |
| struct usb_anchor rx_submitted; | |
| struct can_berr_counter bec; | |
| bool usb_ka_first_pass; | |
| bool can_ka_first_pass; | |
| bool can_speed_check; | |
| atomic_t free_ctx_cnt; | |
| }; | |
| /* CAN frame */ | |
| struct __packed mcba_usb_msg_can { | |
| u8 cmd_id; | |
| __be16 eid; | |
| __be16 sid; | |
| u8 dlc; | |
| u8 data[8]; | |
| u8 timestamp[4]; | |
| u8 checksum; | |
| }; | |
| /* command frame */ | |
| struct __packed mcba_usb_msg { | |
| u8 cmd_id; | |
| u8 unused[18]; | |
| }; | |
| struct __packed mcba_usb_msg_ka_usb { | |
| u8 cmd_id; | |
| u8 termination_state; | |
| u8 soft_ver_major; | |
| u8 soft_ver_minor; | |
| u8 unused[15]; | |
| }; | |
| struct __packed mcba_usb_msg_ka_can { | |
| u8 cmd_id; | |
| u8 tx_err_cnt; | |
| u8 rx_err_cnt; | |
| u8 rx_buff_ovfl; | |
| u8 tx_bus_off; | |
| __be16 can_bitrate; | |
| __le16 rx_lost; | |
| u8 can_stat; | |
| u8 soft_ver_major; | |
| u8 soft_ver_minor; | |
| u8 debug_mode; | |
| u8 test_complete; | |
| u8 test_result; | |
| u8 unused[4]; | |
| }; | |
| struct __packed mcba_usb_msg_change_bitrate { | |
| u8 cmd_id; | |
| __be16 bitrate; | |
| u8 unused[16]; | |
| }; | |
| struct __packed mcba_usb_msg_termination { | |
| u8 cmd_id; | |
| u8 termination; | |
| u8 unused[17]; | |
| }; | |
| struct __packed mcba_usb_msg_fw_ver { | |
| u8 cmd_id; | |
| u8 pic; | |
| u8 unused[17]; | |
| }; | |
| static const struct usb_device_id mcba_usb_table[] = { | |
| { USB_DEVICE(MCBA_VENDOR_ID, MCBA_PRODUCT_ID) }, | |
| {} /* Terminating entry */ | |
| }; | |
| MODULE_DEVICE_TABLE(usb, mcba_usb_table); | |
| static const u16 mcba_termination[] = { MCBA_TERMINATION_DISABLED, | |
| MCBA_TERMINATION_ENABLED }; | |
| static const u32 mcba_bitrate[] = { 20000, 33333, 50000, 80000, 83333, | |
| 100000, 125000, 150000, 175000, 200000, | |
| 225000, 250000, 275000, 300000, 500000, | |
| 625000, 800000, 1000000 }; | |
| static inline void mcba_init_ctx(struct mcba_priv *priv) | |
| { | |
| int i = 0; | |
| for (i = 0; i < MCBA_MAX_TX_URBS; i++) { | |
| priv->tx_context[i].ndx = MCBA_CTX_FREE; | |
| priv->tx_context[i].priv = priv; | |
| } | |
| atomic_set(&priv->free_ctx_cnt, ARRAY_SIZE(priv->tx_context)); | |
| } | |
| static inline struct mcba_usb_ctx *mcba_usb_get_free_ctx(struct mcba_priv *priv, | |
| struct can_frame *cf) | |
| { | |
| int i = 0; | |
| struct mcba_usb_ctx *ctx = NULL; | |
| for (i = 0; i < MCBA_MAX_TX_URBS; i++) { | |
| if (priv->tx_context[i].ndx == MCBA_CTX_FREE) { | |
| ctx = &priv->tx_context[i]; | |
| ctx->ndx = i; | |
| if (cf) { | |
| ctx->can = true; | |
| ctx->dlc = cf->can_dlc; | |
| } else { | |
| ctx->can = false; | |
| ctx->dlc = 0; | |
| } | |
| atomic_dec(&priv->free_ctx_cnt); | |
| break; | |
| } | |
| } | |
| if (!atomic_read(&priv->free_ctx_cnt)) | |
| /* That was the last free ctx. Slow down tx path */ | |
| netif_stop_queue(priv->netdev); | |
| return ctx; | |
| } | |
| /* mcba_usb_free_ctx and mcba_usb_get_free_ctx are executed by different | |
| * threads. The order of execution in below function is important. | |
| */ | |
| static inline void mcba_usb_free_ctx(struct mcba_usb_ctx *ctx) | |
| { | |
| /* Increase number of free ctxs before freeing ctx */ | |
| atomic_inc(&ctx->priv->free_ctx_cnt); | |
| ctx->ndx = MCBA_CTX_FREE; | |
| /* Wake up the queue once ctx is marked free */ | |
| netif_wake_queue(ctx->priv->netdev); | |
| } | |
| static void mcba_usb_write_bulk_callback(struct urb *urb) | |
| { | |
| struct mcba_usb_ctx *ctx = urb->context; | |
| struct net_device *netdev; | |
| WARN_ON(!ctx); | |
| netdev = ctx->priv->netdev; | |
| /* free up our allocated buffer */ | |
| usb_free_coherent(urb->dev, urb->transfer_buffer_length, | |
| urb->transfer_buffer, urb->transfer_dma); | |
| if (ctx->can) { | |
| if (!netif_device_present(netdev)) | |
| return; | |
| netdev->stats.tx_packets++; | |
| netdev->stats.tx_bytes += ctx->dlc; | |
| can_led_event(netdev, CAN_LED_EVENT_TX); | |
| can_get_echo_skb(netdev, ctx->ndx); | |
| } | |
| if (urb->status) | |
| netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status); | |
| /* Release the context */ | |
| mcba_usb_free_ctx(ctx); | |
| } | |
| /* Send data to device */ | |
| static netdev_tx_t mcba_usb_xmit(struct mcba_priv *priv, | |
| struct mcba_usb_msg *usb_msg, | |
| struct mcba_usb_ctx *ctx) | |
| { | |
| struct urb *urb; | |
| u8 *buf; | |
| int err; | |
| /* create a URB, and a buffer for it, and copy the data to the URB */ | |
| urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (!urb) | |
| return -ENOMEM; | |
| buf = usb_alloc_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, GFP_ATOMIC, | |
| &urb->transfer_dma); | |
| if (!buf) { | |
| err = -ENOMEM; | |
| goto nomembuf; | |
| } | |
| memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE); | |
| usb_fill_bulk_urb(urb, priv->udev, | |
| usb_sndbulkpipe(priv->udev, MCBA_USB_EP_OUT), buf, | |
| MCBA_USB_TX_BUFF_SIZE, mcba_usb_write_bulk_callback, | |
| ctx); | |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| usb_anchor_urb(urb, &priv->tx_submitted); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (unlikely(err)) | |
| goto failed; | |
| /* Release our reference to this URB, the USB core will eventually free | |
| * it entirely. | |
| */ | |
| usb_free_urb(urb); | |
| return 0; | |
| failed: | |
| usb_unanchor_urb(urb); | |
| usb_free_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, buf, | |
| urb->transfer_dma); | |
| if (err == -ENODEV) | |
| netif_device_detach(priv->netdev); | |
| else | |
| netdev_warn(priv->netdev, "failed tx_urb %d\n", err); | |
| nomembuf: | |
| usb_free_urb(urb); | |
| return err; | |
| } | |
| /* Send data to device */ | |
| static netdev_tx_t mcba_usb_start_xmit(struct sk_buff *skb, | |
| struct net_device *netdev) | |
| { | |
| struct mcba_priv *priv = netdev_priv(netdev); | |
| struct can_frame *cf = (struct can_frame *)skb->data; | |
| struct mcba_usb_ctx *ctx = NULL; | |
| struct net_device_stats *stats = &priv->netdev->stats; | |
| u16 sid; | |
| int err; | |
| struct mcba_usb_msg_can usb_msg = { | |
| .cmd_id = MBCA_CMD_TRANSMIT_MESSAGE_EV | |
| }; | |
| if (can_dropped_invalid_skb(netdev, skb)) | |
| return NETDEV_TX_OK; | |
| ctx = mcba_usb_get_free_ctx(priv, cf); | |
| if (!ctx) | |
| return NETDEV_TX_BUSY; | |
| can_put_echo_skb(skb, priv->netdev, ctx->ndx); | |
| if (cf->can_id & CAN_EFF_FLAG) { | |
| /* SIDH | SIDL | EIDH | EIDL | |
| * 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0 | |
| */ | |
| sid = MCBA_SIDL_EXID_MASK; | |
| /* store 28-18 bits */ | |
| sid |= (cf->can_id & 0x1ffc0000) >> 13; | |
| /* store 17-16 bits */ | |
| sid |= (cf->can_id & 0x30000) >> 16; | |
| put_unaligned_be16(sid, &usb_msg.sid); | |
| /* store 15-0 bits */ | |
| put_unaligned_be16(cf->can_id & 0xffff, &usb_msg.eid); | |
| } else { | |
| /* SIDH | SIDL | |
| * 10 - 3 | 2 1 0 x x x x x | |
| */ | |
| put_unaligned_be16((cf->can_id & CAN_SFF_MASK) << 5, | |
| &usb_msg.sid); | |
| usb_msg.eid = 0; | |
| } | |
| usb_msg.dlc = cf->can_dlc; | |
| memcpy(usb_msg.data, cf->data, usb_msg.dlc); | |
| if (cf->can_id & CAN_RTR_FLAG) | |
| usb_msg.dlc |= MCBA_DLC_RTR_MASK; | |
| err = mcba_usb_xmit(priv, (struct mcba_usb_msg *)&usb_msg, ctx); | |
| if (err) | |
| goto xmit_failed; | |
| return NETDEV_TX_OK; | |
| xmit_failed: | |
| can_free_echo_skb(priv->netdev, ctx->ndx); | |
| mcba_usb_free_ctx(ctx); | |
| dev_kfree_skb(skb); | |
| stats->tx_dropped++; | |
| return NETDEV_TX_OK; | |
| } | |
| /* Send cmd to device */ | |
| static void mcba_usb_xmit_cmd(struct mcba_priv *priv, | |
| struct mcba_usb_msg *usb_msg) | |
| { | |
| struct mcba_usb_ctx *ctx = NULL; | |
| int err; | |
| ctx = mcba_usb_get_free_ctx(priv, NULL); | |
| if (!ctx) { | |
| netdev_err(priv->netdev, | |
| "Lack of free ctx. Sending (%d) cmd aborted", | |
| usb_msg->cmd_id); | |
| return; | |
| } | |
| err = mcba_usb_xmit(priv, usb_msg, ctx); | |
| if (err) | |
| netdev_err(priv->netdev, "Failed to send cmd (%d)", | |
| usb_msg->cmd_id); | |
| } | |
| static void mcba_usb_xmit_change_bitrate(struct mcba_priv *priv, u16 bitrate) | |
| { | |
| struct mcba_usb_msg_change_bitrate usb_msg = { | |
| .cmd_id = MBCA_CMD_CHANGE_BIT_RATE | |
| }; | |
| put_unaligned_be16(bitrate, &usb_msg.bitrate); | |
| mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg); | |
| } | |
| static void mcba_usb_xmit_read_fw_ver(struct mcba_priv *priv, u8 pic) | |
| { | |
| struct mcba_usb_msg_fw_ver usb_msg = { | |
| .cmd_id = MBCA_CMD_READ_FW_VERSION, | |
| .pic = pic | |
| }; | |
| mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg); | |
| } | |
| static void mcba_usb_process_can(struct mcba_priv *priv, | |
| struct mcba_usb_msg_can *msg) | |
| { | |
| struct can_frame *cf; | |
| struct sk_buff *skb; | |
| struct net_device_stats *stats = &priv->netdev->stats; | |
| u16 sid; | |
| skb = alloc_can_skb(priv->netdev, &cf); | |
| if (!skb) | |
| return; | |
| sid = get_unaligned_be16(&msg->sid); | |
| if (sid & MCBA_SIDL_EXID_MASK) { | |
| /* SIDH | SIDL | EIDH | EIDL | |
| * 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0 | |
| */ | |
| cf->can_id = CAN_EFF_FLAG; | |
| /* store 28-18 bits */ | |
| cf->can_id |= (sid & 0xffe0) << 13; | |
| /* store 17-16 bits */ | |
| cf->can_id |= (sid & 3) << 16; | |
| /* store 15-0 bits */ | |
| cf->can_id |= get_unaligned_be16(&msg->eid); | |
| } else { | |
| /* SIDH | SIDL | |
| * 10 - 3 | 2 1 0 x x x x x | |
| */ | |
| cf->can_id = (sid & 0xffe0) >> 5; | |
| } | |
| if (msg->dlc & MCBA_DLC_RTR_MASK) | |
| cf->can_id |= CAN_RTR_FLAG; | |
| cf->can_dlc = get_can_dlc(msg->dlc & MCBA_DLC_MASK); | |
| memcpy(cf->data, msg->data, cf->can_dlc); | |
| stats->rx_packets++; | |
| stats->rx_bytes += cf->can_dlc; | |
| can_led_event(priv->netdev, CAN_LED_EVENT_RX); | |
| netif_rx(skb); | |
| } | |
| static void mcba_usb_process_ka_usb(struct mcba_priv *priv, | |
| struct mcba_usb_msg_ka_usb *msg) | |
| { | |
| if (unlikely(priv->usb_ka_first_pass)) { | |
| netdev_info(priv->netdev, "PIC USB version %hhu.%hhu\n", | |
| msg->soft_ver_major, msg->soft_ver_minor); | |
| priv->usb_ka_first_pass = false; | |
| } | |
| if (msg->termination_state) | |
| priv->can.termination = MCBA_TERMINATION_ENABLED; | |
| else | |
| priv->can.termination = MCBA_TERMINATION_DISABLED; | |
| } | |
| static u32 convert_can2host_bitrate(struct mcba_usb_msg_ka_can *msg) | |
| { | |
| const u32 bitrate = get_unaligned_be16(&msg->can_bitrate); | |
| if ((bitrate == 33) || (bitrate == 83)) | |
| return bitrate * 1000 + 333; | |
| else | |
| return bitrate * 1000; | |
| } | |
| static void mcba_usb_process_ka_can(struct mcba_priv *priv, | |
| struct mcba_usb_msg_ka_can *msg) | |
| { | |
| if (unlikely(priv->can_ka_first_pass)) { | |
| netdev_info(priv->netdev, "PIC CAN version %hhu.%hhu\n", | |
| msg->soft_ver_major, msg->soft_ver_minor); | |
| priv->can_ka_first_pass = false; | |
| } | |
| if (unlikely(priv->can_speed_check)) { | |
| const u32 bitrate = convert_can2host_bitrate(msg); | |
| priv->can_speed_check = false; | |
| if (bitrate != priv->can.bittiming.bitrate) | |
| netdev_err( | |
| priv->netdev, | |
| "Wrong bitrate reported by the device (%u). Expected %u", | |
| bitrate, priv->can.bittiming.bitrate); | |
| } | |
| priv->bec.txerr = msg->tx_err_cnt; | |
| priv->bec.rxerr = msg->rx_err_cnt; | |
| if (msg->tx_bus_off) | |
| priv->can.state = CAN_STATE_BUS_OFF; | |
| else if ((priv->bec.txerr > MCBA_CAN_STATE_ERR_PSV_TH) || | |
| (priv->bec.rxerr > MCBA_CAN_STATE_ERR_PSV_TH)) | |
| priv->can.state = CAN_STATE_ERROR_PASSIVE; | |
| else if ((priv->bec.txerr > MCBA_CAN_STATE_WRN_TH) || | |
| (priv->bec.rxerr > MCBA_CAN_STATE_WRN_TH)) | |
| priv->can.state = CAN_STATE_ERROR_WARNING; | |
| } | |
| static void mcba_usb_process_rx(struct mcba_priv *priv, | |
| struct mcba_usb_msg *msg) | |
| { | |
| switch (msg->cmd_id) { | |
| case MBCA_CMD_I_AM_ALIVE_FROM_CAN: | |
| mcba_usb_process_ka_can(priv, | |
| (struct mcba_usb_msg_ka_can *)msg); | |
| break; | |
| case MBCA_CMD_I_AM_ALIVE_FROM_USB: | |
| mcba_usb_process_ka_usb(priv, | |
| (struct mcba_usb_msg_ka_usb *)msg); | |
| break; | |
| case MBCA_CMD_RECEIVE_MESSAGE: | |
| mcba_usb_process_can(priv, (struct mcba_usb_msg_can *)msg); | |
| break; | |
| case MBCA_CMD_NOTHING_TO_SEND: | |
| /* Side effect of communication between PIC_USB and PIC_CAN. | |
| * PIC_CAN is telling us that it has nothing to send | |
| */ | |
| break; | |
| case MBCA_CMD_TRANSMIT_MESSAGE_RSP: | |
| /* Transmission response from the device containing timestamp */ | |
| break; | |
| default: | |
| netdev_warn(priv->netdev, "Unsupported msg (0x%hhX)", | |
| msg->cmd_id); | |
| break; | |
| } | |
| } | |
| /* Callback for reading data from device | |
| * | |
| * Check urb status, call read function and resubmit urb read operation. | |
| */ | |
| static void mcba_usb_read_bulk_callback(struct urb *urb) | |
| { | |
| struct mcba_priv *priv = urb->context; | |
| struct net_device *netdev; | |
| int retval; | |
| int pos = 0; | |
| netdev = priv->netdev; | |
| if (!netif_device_present(netdev)) | |
| return; | |
| switch (urb->status) { | |
| case 0: /* success */ | |
| break; | |
| case -ENOENT: | |
| case -ESHUTDOWN: | |
| return; | |
| default: | |
| netdev_info(netdev, "Rx URB aborted (%d)\n", urb->status); | |
| goto resubmit_urb; | |
| } | |
| while (pos < urb->actual_length) { | |
| struct mcba_usb_msg *msg; | |
| if (pos + sizeof(struct mcba_usb_msg) > urb->actual_length) { | |
| netdev_err(priv->netdev, "format error\n"); | |
| break; | |
| } | |
| msg = (struct mcba_usb_msg *)(urb->transfer_buffer + pos); | |
| mcba_usb_process_rx(priv, msg); | |
| pos += sizeof(struct mcba_usb_msg); | |
| } | |
| resubmit_urb: | |
| usb_fill_bulk_urb(urb, priv->udev, | |
| usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_OUT), | |
| urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE, | |
| mcba_usb_read_bulk_callback, priv); | |
| retval = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (retval == -ENODEV) | |
| netif_device_detach(netdev); | |
| else if (retval) | |
| netdev_err(netdev, "failed resubmitting read bulk urb: %d\n", | |
| retval); | |
| } | |
| /* Start USB device */ | |
| static int mcba_usb_start(struct mcba_priv *priv) | |
| { | |
| struct net_device *netdev = priv->netdev; | |
| int err, i; | |
| mcba_init_ctx(priv); | |
| for (i = 0; i < MCBA_MAX_RX_URBS; i++) { | |
| struct urb *urb = NULL; | |
| u8 *buf; | |
| /* create a URB, and a buffer for it */ | |
| urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!urb) { | |
| err = -ENOMEM; | |
| break; | |
| } | |
| buf = usb_alloc_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE, | |
| GFP_KERNEL, &urb->transfer_dma); | |
| if (!buf) { | |
| netdev_err(netdev, "No memory left for USB buffer\n"); | |
| usb_free_urb(urb); | |
| err = -ENOMEM; | |
| break; | |
| } | |
| usb_fill_bulk_urb(urb, priv->udev, | |
| usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN), | |
| buf, MCBA_USB_RX_BUFF_SIZE, | |
| mcba_usb_read_bulk_callback, priv); | |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| usb_anchor_urb(urb, &priv->rx_submitted); | |
| err = usb_submit_urb(urb, GFP_KERNEL); | |
| if (err) { | |
| usb_unanchor_urb(urb); | |
| usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE, | |
| buf, urb->transfer_dma); | |
| usb_free_urb(urb); | |
| break; | |
| } | |
| /* Drop reference, USB core will take care of freeing it */ | |
| usb_free_urb(urb); | |
| } | |
| /* Did we submit any URBs */ | |
| if (i == 0) { | |
| netdev_warn(netdev, "couldn't setup read URBs\n"); | |
| return err; | |
| } | |
| /* Warn if we've couldn't transmit all the URBs */ | |
| if (i < MCBA_MAX_RX_URBS) | |
| netdev_warn(netdev, "rx performance may be slow\n"); | |
| mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_USB); | |
| mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_CAN); | |
| return err; | |
| } | |
| /* Open USB device */ | |
| static int mcba_usb_open(struct net_device *netdev) | |
| { | |
| struct mcba_priv *priv = netdev_priv(netdev); | |
| int err; | |
| /* common open */ | |
| err = open_candev(netdev); | |
| if (err) | |
| return err; | |
| priv->can_speed_check = true; | |
| priv->can.state = CAN_STATE_ERROR_ACTIVE; | |
| can_led_event(netdev, CAN_LED_EVENT_OPEN); | |
| netif_start_queue(netdev); | |
| return 0; | |
| } | |
| static void mcba_urb_unlink(struct mcba_priv *priv) | |
| { | |
| usb_kill_anchored_urbs(&priv->rx_submitted); | |
| usb_kill_anchored_urbs(&priv->tx_submitted); | |
| } | |
| /* Close USB device */ | |
| static int mcba_usb_close(struct net_device *netdev) | |
| { | |
| struct mcba_priv *priv = netdev_priv(netdev); | |
| priv->can.state = CAN_STATE_STOPPED; | |
| netif_stop_queue(netdev); | |
| /* Stop polling */ | |
| mcba_urb_unlink(priv); | |
| close_candev(netdev); | |
| can_led_event(netdev, CAN_LED_EVENT_STOP); | |
| return 0; | |
| } | |
| /* Set network device mode | |
| * | |
| * Maybe we should leave this function empty, because the device | |
| * set mode variable with open command. | |
| */ | |
| static int mcba_net_set_mode(struct net_device *netdev, enum can_mode mode) | |
| { | |
| return 0; | |
| } | |
| static int mcba_net_get_berr_counter(const struct net_device *netdev, | |
| struct can_berr_counter *bec) | |
| { | |
| struct mcba_priv *priv = netdev_priv(netdev); | |
| bec->txerr = priv->bec.txerr; | |
| bec->rxerr = priv->bec.rxerr; | |
| return 0; | |
| } | |
| static const struct net_device_ops mcba_netdev_ops = { | |
| .ndo_open = mcba_usb_open, | |
| .ndo_stop = mcba_usb_close, | |
| .ndo_start_xmit = mcba_usb_start_xmit, | |
| }; | |
| /* Microchip CANBUS has hardcoded bittiming values by default. | |
| * This function sends request via USB to change the speed and align bittiming | |
| * values for presentation purposes only | |
| */ | |
| static int mcba_net_set_bittiming(struct net_device *netdev) | |
| { | |
| struct mcba_priv *priv = netdev_priv(netdev); | |
| const u16 bitrate_kbps = priv->can.bittiming.bitrate / 1000; | |
| mcba_usb_xmit_change_bitrate(priv, bitrate_kbps); | |
| return 0; | |
| } | |
| static int mcba_set_termination(struct net_device *netdev, u16 term) | |
| { | |
| struct mcba_priv *priv = netdev_priv(netdev); | |
| struct mcba_usb_msg_termination usb_msg = { | |
| .cmd_id = MBCA_CMD_SETUP_TERMINATION_RESISTANCE | |
| }; | |
| if (term == MCBA_TERMINATION_ENABLED) | |
| usb_msg.termination = 1; | |
| else | |
| usb_msg.termination = 0; | |
| mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg); | |
| return 0; | |
| } | |
| static int mcba_usb_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| struct net_device *netdev; | |
| struct mcba_priv *priv; | |
| int err = -ENOMEM; | |
| struct usb_device *usbdev = interface_to_usbdev(intf); | |
| netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS); | |
| if (!netdev) { | |
| dev_err(&intf->dev, "Couldn't alloc candev\n"); | |
| return -ENOMEM; | |
| } | |
| priv = netdev_priv(netdev); | |
| priv->udev = usbdev; | |
| priv->netdev = netdev; | |
| priv->usb_ka_first_pass = true; | |
| priv->can_ka_first_pass = true; | |
| priv->can_speed_check = false; | |
| init_usb_anchor(&priv->rx_submitted); | |
| init_usb_anchor(&priv->tx_submitted); | |
| usb_set_intfdata(intf, priv); | |
| /* Init CAN device */ | |
| priv->can.state = CAN_STATE_STOPPED; | |
| priv->can.termination_const = mcba_termination; | |
| priv->can.termination_const_cnt = ARRAY_SIZE(mcba_termination); | |
| priv->can.bitrate_const = mcba_bitrate; | |
| priv->can.bitrate_const_cnt = ARRAY_SIZE(mcba_bitrate); | |
| priv->can.do_set_termination = mcba_set_termination; | |
| priv->can.do_set_mode = mcba_net_set_mode; | |
| priv->can.do_get_berr_counter = mcba_net_get_berr_counter; | |
| priv->can.do_set_bittiming = mcba_net_set_bittiming; | |
| netdev->netdev_ops = &mcba_netdev_ops; | |
| netdev->flags |= IFF_ECHO; /* we support local echo */ | |
| SET_NETDEV_DEV(netdev, &intf->dev); | |
| err = register_candev(netdev); | |
| if (err) { | |
| netdev_err(netdev, "couldn't register CAN device: %d\n", err); | |
| goto cleanup_free_candev; | |
| } | |
| devm_can_led_init(netdev); | |
| /* Start USB dev only if we have successfully registered CAN device */ | |
| err = mcba_usb_start(priv); | |
| if (err) { | |
| if (err == -ENODEV) | |
| netif_device_detach(priv->netdev); | |
| netdev_warn(netdev, "couldn't start device: %d\n", err); | |
| goto cleanup_unregister_candev; | |
| } | |
| dev_info(&intf->dev, "Microchip CAN BUS analizer connected\n"); | |
| return 0; | |
| cleanup_unregister_candev: | |
| unregister_candev(priv->netdev); | |
| cleanup_free_candev: | |
| free_candev(netdev); | |
| return err; | |
| } | |
| /* Called by the usb core when driver is unloaded or device is removed */ | |
| static void mcba_usb_disconnect(struct usb_interface *intf) | |
| { | |
| struct mcba_priv *priv = usb_get_intfdata(intf); | |
| usb_set_intfdata(intf, NULL); | |
| netdev_info(priv->netdev, "device disconnected\n"); | |
| unregister_candev(priv->netdev); | |
| free_candev(priv->netdev); | |
| mcba_urb_unlink(priv); | |
| } | |
| static struct usb_driver mcba_usb_driver = { | |
| .name = MCBA_MODULE_NAME, | |
| .probe = mcba_usb_probe, | |
| .disconnect = mcba_usb_disconnect, | |
| .id_table = mcba_usb_table, | |
| }; | |
| module_usb_driver(mcba_usb_driver); | |
| MODULE_AUTHOR("Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>"); | |
| MODULE_DESCRIPTION("SocketCAN driver for Microchip CAN BUS Analyzer Tool"); | |
| MODULE_LICENSE("GPL v2"); |