| /* | |
| * This file is part of wl1271 | |
| * | |
| * Copyright (C) 2009-2010 Nokia Corporation | |
| * | |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
| * 02110-1301 USA | |
| * | |
| */ | |
| #include <linux/irq.h> | |
| #include <linux/module.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mmc/sdio.h> | |
| #include <linux/mmc/sdio_func.h> | |
| #include <linux/mmc/sdio_ids.h> | |
| #include <linux/mmc/card.h> | |
| #include <linux/mmc/host.h> | |
| #include <linux/gpio.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/printk.h> | |
| #include <linux/of.h> | |
| #include <linux/of_irq.h> | |
| #include "wlcore.h" | |
| #include "wl12xx_80211.h" | |
| #include "io.h" | |
| #ifndef SDIO_VENDOR_ID_TI | |
| #define SDIO_VENDOR_ID_TI 0x0097 | |
| #endif | |
| #ifndef SDIO_DEVICE_ID_TI_WL1271 | |
| #define SDIO_DEVICE_ID_TI_WL1271 0x4076 | |
| #endif | |
| static bool dump = false; | |
| struct wl12xx_sdio_glue { | |
| struct device *dev; | |
| struct platform_device *core; | |
| }; | |
| static const struct sdio_device_id wl1271_devices[] = { | |
| { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(sdio, wl1271_devices); | |
| static void wl1271_sdio_set_block_size(struct device *child, | |
| unsigned int blksz) | |
| { | |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); | |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); | |
| sdio_claim_host(func); | |
| sdio_set_block_size(func, blksz); | |
| sdio_release_host(func); | |
| } | |
| static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr, | |
| void *buf, size_t len, bool fixed) | |
| { | |
| int ret; | |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); | |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); | |
| sdio_claim_host(func); | |
| if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { | |
| ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); | |
| dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n", | |
| addr, ((u8 *)buf)[0]); | |
| } else { | |
| if (fixed) | |
| ret = sdio_readsb(func, buf, addr, len); | |
| else | |
| ret = sdio_memcpy_fromio(func, buf, addr, len); | |
| dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n", | |
| addr, len); | |
| } | |
| sdio_release_host(func); | |
| if (WARN_ON(ret)) | |
| dev_err(child->parent, "sdio read failed (%d)\n", ret); | |
| if (unlikely(dump)) { | |
| printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr); | |
| print_hex_dump(KERN_DEBUG, "wlcore_sdio: READ ", | |
| DUMP_PREFIX_OFFSET, 16, 1, | |
| buf, len, false); | |
| } | |
| return ret; | |
| } | |
| static int __must_check wl12xx_sdio_raw_write(struct device *child, int addr, | |
| void *buf, size_t len, bool fixed) | |
| { | |
| int ret; | |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); | |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); | |
| sdio_claim_host(func); | |
| if (unlikely(dump)) { | |
| printk(KERN_DEBUG "wlcore_sdio: WRITE to 0x%04x\n", addr); | |
| print_hex_dump(KERN_DEBUG, "wlcore_sdio: WRITE ", | |
| DUMP_PREFIX_OFFSET, 16, 1, | |
| buf, len, false); | |
| } | |
| if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { | |
| sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); | |
| dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n", | |
| addr, ((u8 *)buf)[0]); | |
| } else { | |
| dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n", | |
| addr, len); | |
| if (fixed) | |
| ret = sdio_writesb(func, addr, buf, len); | |
| else | |
| ret = sdio_memcpy_toio(func, addr, buf, len); | |
| } | |
| sdio_release_host(func); | |
| if (WARN_ON(ret)) | |
| dev_err(child->parent, "sdio write failed (%d)\n", ret); | |
| return ret; | |
| } | |
| static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue) | |
| { | |
| int ret; | |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); | |
| struct mmc_card *card = func->card; | |
| ret = pm_runtime_get_sync(&card->dev); | |
| if (ret) { | |
| /* | |
| * Runtime PM might be temporarily disabled, or the device | |
| * might have a positive reference counter. Make sure it is | |
| * really powered on. | |
| */ | |
| ret = mmc_power_restore_host(card->host); | |
| if (ret < 0) { | |
| pm_runtime_put_sync(&card->dev); | |
| goto out; | |
| } | |
| } | |
| sdio_claim_host(func); | |
| sdio_enable_func(func); | |
| sdio_release_host(func); | |
| out: | |
| return ret; | |
| } | |
| static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue) | |
| { | |
| int ret; | |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); | |
| struct mmc_card *card = func->card; | |
| sdio_claim_host(func); | |
| sdio_disable_func(func); | |
| sdio_release_host(func); | |
| /* Power off the card manually in case it wasn't powered off above */ | |
| ret = mmc_power_save_host(card->host); | |
| if (ret < 0) | |
| goto out; | |
| /* Let runtime PM know the card is powered off */ | |
| pm_runtime_put_sync(&card->dev); | |
| out: | |
| return ret; | |
| } | |
| static int wl12xx_sdio_set_power(struct device *child, bool enable) | |
| { | |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); | |
| if (enable) | |
| return wl12xx_sdio_power_on(glue); | |
| else | |
| return wl12xx_sdio_power_off(glue); | |
| } | |
| static struct wl1271_if_operations sdio_ops = { | |
| .read = wl12xx_sdio_raw_read, | |
| .write = wl12xx_sdio_raw_write, | |
| .power = wl12xx_sdio_set_power, | |
| .set_block_size = wl1271_sdio_set_block_size, | |
| }; | |
| #ifdef CONFIG_OF | |
| static const struct wilink_family_data wl127x_data = { | |
| .name = "wl127x", | |
| .nvs_name = "ti-connectivity/wl127x-nvs.bin", | |
| }; | |
| static const struct wilink_family_data wl128x_data = { | |
| .name = "wl128x", | |
| .nvs_name = "ti-connectivity/wl128x-nvs.bin", | |
| }; | |
| static const struct wilink_family_data wl18xx_data = { | |
| .name = "wl18xx", | |
| .cfg_name = "ti-connectivity/wl18xx-conf.bin", | |
| .nvs_name = "ti-connectivity/wl1271-nvs.bin", | |
| }; | |
| static const struct of_device_id wlcore_sdio_of_match_table[] = { | |
| { .compatible = "ti,wl1271", .data = &wl127x_data }, | |
| { .compatible = "ti,wl1273", .data = &wl127x_data }, | |
| { .compatible = "ti,wl1281", .data = &wl128x_data }, | |
| { .compatible = "ti,wl1283", .data = &wl128x_data }, | |
| { .compatible = "ti,wl1285", .data = &wl128x_data }, | |
| { .compatible = "ti,wl1801", .data = &wl18xx_data }, | |
| { .compatible = "ti,wl1805", .data = &wl18xx_data }, | |
| { .compatible = "ti,wl1807", .data = &wl18xx_data }, | |
| { .compatible = "ti,wl1831", .data = &wl18xx_data }, | |
| { .compatible = "ti,wl1835", .data = &wl18xx_data }, | |
| { .compatible = "ti,wl1837", .data = &wl18xx_data }, | |
| { } | |
| }; | |
| static int wlcore_probe_of(struct device *dev, int *irq, | |
| struct wlcore_platdev_data *pdev_data) | |
| { | |
| struct device_node *np = dev->of_node; | |
| const struct of_device_id *of_id; | |
| of_id = of_match_node(wlcore_sdio_of_match_table, np); | |
| if (!of_id) | |
| return -ENODEV; | |
| pdev_data->family = of_id->data; | |
| *irq = irq_of_parse_and_map(np, 0); | |
| if (!*irq) { | |
| dev_err(dev, "No irq in platform data\n"); | |
| return -EINVAL; | |
| } | |
| /* optional clock frequency params */ | |
| of_property_read_u32(np, "ref-clock-frequency", | |
| &pdev_data->ref_clock_freq); | |
| of_property_read_u32(np, "tcxo-clock-frequency", | |
| &pdev_data->tcxo_clock_freq); | |
| return 0; | |
| } | |
| #else | |
| static int wlcore_probe_of(struct device *dev, int *irq, | |
| struct wlcore_platdev_data *pdev_data) | |
| { | |
| return -ENODATA; | |
| } | |
| #endif | |
| static int wl1271_probe(struct sdio_func *func, | |
| const struct sdio_device_id *id) | |
| { | |
| struct wlcore_platdev_data *pdev_data; | |
| struct wl12xx_sdio_glue *glue; | |
| struct resource res[1]; | |
| mmc_pm_flag_t mmcflags; | |
| int ret = -ENOMEM; | |
| int irq; | |
| const char *chip_family; | |
| /* We are only able to handle the wlan function */ | |
| if (func->num != 0x02) | |
| return -ENODEV; | |
| pdev_data = devm_kzalloc(&func->dev, sizeof(*pdev_data), GFP_KERNEL); | |
| if (!pdev_data) | |
| return -ENOMEM; | |
| pdev_data->if_ops = &sdio_ops; | |
| glue = devm_kzalloc(&func->dev, sizeof(*glue), GFP_KERNEL); | |
| if (!glue) | |
| return -ENOMEM; | |
| glue->dev = &func->dev; | |
| /* Grab access to FN0 for ELP reg. */ | |
| func->card->quirks |= MMC_QUIRK_LENIENT_FN0; | |
| /* Use block mode for transferring over one block size of data */ | |
| func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; | |
| ret = wlcore_probe_of(&func->dev, &irq, pdev_data); | |
| if (ret) | |
| goto out; | |
| /* if sdio can keep power while host is suspended, enable wow */ | |
| mmcflags = sdio_get_host_pm_caps(func); | |
| dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags); | |
| if (mmcflags & MMC_PM_KEEP_POWER) | |
| pdev_data->pwr_in_suspend = true; | |
| sdio_set_drvdata(func, glue); | |
| /* Tell PM core that we don't need the card to be powered now */ | |
| pm_runtime_put_noidle(&func->dev); | |
| /* | |
| * Due to a hardware bug, we can't differentiate wl18xx from | |
| * wl12xx, because both report the same device ID. The only | |
| * way to differentiate is by checking the SDIO revision, | |
| * which is 3.00 on the wl18xx chips. | |
| */ | |
| if (func->card->cccr.sdio_vsn == SDIO_SDIO_REV_3_00) | |
| chip_family = "wl18xx"; | |
| else | |
| chip_family = "wl12xx"; | |
| glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO); | |
| if (!glue->core) { | |
| dev_err(glue->dev, "can't allocate platform_device"); | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| glue->core->dev.parent = &func->dev; | |
| memset(res, 0x00, sizeof(res)); | |
| res[0].start = irq; | |
| res[0].flags = IORESOURCE_IRQ | | |
| irqd_get_trigger_type(irq_get_irq_data(irq)); | |
| res[0].name = "irq"; | |
| ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); | |
| if (ret) { | |
| dev_err(glue->dev, "can't add resources\n"); | |
| goto out_dev_put; | |
| } | |
| ret = platform_device_add_data(glue->core, pdev_data, | |
| sizeof(*pdev_data)); | |
| if (ret) { | |
| dev_err(glue->dev, "can't add platform data\n"); | |
| goto out_dev_put; | |
| } | |
| ret = platform_device_add(glue->core); | |
| if (ret) { | |
| dev_err(glue->dev, "can't add platform device\n"); | |
| goto out_dev_put; | |
| } | |
| return 0; | |
| out_dev_put: | |
| platform_device_put(glue->core); | |
| out: | |
| return ret; | |
| } | |
| static void wl1271_remove(struct sdio_func *func) | |
| { | |
| struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); | |
| /* Undo decrement done above in wl1271_probe */ | |
| pm_runtime_get_noresume(&func->dev); | |
| platform_device_unregister(glue->core); | |
| } | |
| #ifdef CONFIG_PM | |
| static int wl1271_suspend(struct device *dev) | |
| { | |
| /* Tell MMC/SDIO core it's OK to power down the card | |
| * (if it isn't already), but not to remove it completely */ | |
| struct sdio_func *func = dev_to_sdio_func(dev); | |
| struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); | |
| struct wl1271 *wl = platform_get_drvdata(glue->core); | |
| mmc_pm_flag_t sdio_flags; | |
| int ret = 0; | |
| dev_dbg(dev, "wl1271 suspend. wow_enabled: %d\n", | |
| wl->wow_enabled); | |
| /* check whether sdio should keep power */ | |
| if (wl->wow_enabled) { | |
| sdio_flags = sdio_get_host_pm_caps(func); | |
| if (!(sdio_flags & MMC_PM_KEEP_POWER)) { | |
| dev_err(dev, "can't keep power while host " | |
| "is suspended\n"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| /* keep power while host suspended */ | |
| ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); | |
| if (ret) { | |
| dev_err(dev, "error while trying to keep power\n"); | |
| goto out; | |
| } | |
| } | |
| out: | |
| return ret; | |
| } | |
| static int wl1271_resume(struct device *dev) | |
| { | |
| dev_dbg(dev, "wl1271 resume\n"); | |
| return 0; | |
| } | |
| static const struct dev_pm_ops wl1271_sdio_pm_ops = { | |
| .suspend = wl1271_suspend, | |
| .resume = wl1271_resume, | |
| }; | |
| #endif | |
| static struct sdio_driver wl1271_sdio_driver = { | |
| .name = "wl1271_sdio", | |
| .id_table = wl1271_devices, | |
| .probe = wl1271_probe, | |
| .remove = wl1271_remove, | |
| #ifdef CONFIG_PM | |
| .drv = { | |
| .pm = &wl1271_sdio_pm_ops, | |
| }, | |
| #endif | |
| }; | |
| static int __init wl1271_init(void) | |
| { | |
| return sdio_register_driver(&wl1271_sdio_driver); | |
| } | |
| static void __exit wl1271_exit(void) | |
| { | |
| sdio_unregister_driver(&wl1271_sdio_driver); | |
| } | |
| module_init(wl1271_init); | |
| module_exit(wl1271_exit); | |
| module_param(dump, bool, S_IRUSR | S_IWUSR); | |
| MODULE_PARM_DESC(dump, "Enable sdio read/write dumps."); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); | |
| MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); |