| /* | |
| * Copyright (c) 2017, The Linux Foundation. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 and | |
| * only version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/delay.h> | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/iopoll.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_address.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/reset.h> | |
| #include <linux/slab.h> | |
| #include <dt-bindings/phy/phy.h> | |
| /* QMP PHY QSERDES COM registers */ | |
| #define QSERDES_COM_BG_TIMER 0x00c | |
| #define QSERDES_COM_SSC_EN_CENTER 0x010 | |
| #define QSERDES_COM_SSC_ADJ_PER1 0x014 | |
| #define QSERDES_COM_SSC_ADJ_PER2 0x018 | |
| #define QSERDES_COM_SSC_PER1 0x01c | |
| #define QSERDES_COM_SSC_PER2 0x020 | |
| #define QSERDES_COM_SSC_STEP_SIZE1 0x024 | |
| #define QSERDES_COM_SSC_STEP_SIZE2 0x028 | |
| #define QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x034 | |
| #define QSERDES_COM_CLK_ENABLE1 0x038 | |
| #define QSERDES_COM_SYS_CLK_CTRL 0x03c | |
| #define QSERDES_COM_SYSCLK_BUF_ENABLE 0x040 | |
| #define QSERDES_COM_PLL_IVCO 0x048 | |
| #define QSERDES_COM_LOCK_CMP1_MODE0 0x04c | |
| #define QSERDES_COM_LOCK_CMP2_MODE0 0x050 | |
| #define QSERDES_COM_LOCK_CMP3_MODE0 0x054 | |
| #define QSERDES_COM_LOCK_CMP1_MODE1 0x058 | |
| #define QSERDES_COM_LOCK_CMP2_MODE1 0x05c | |
| #define QSERDES_COM_LOCK_CMP3_MODE1 0x060 | |
| #define QSERDES_COM_BG_TRIM 0x070 | |
| #define QSERDES_COM_CLK_EP_DIV 0x074 | |
| #define QSERDES_COM_CP_CTRL_MODE0 0x078 | |
| #define QSERDES_COM_CP_CTRL_MODE1 0x07c | |
| #define QSERDES_COM_PLL_RCTRL_MODE0 0x084 | |
| #define QSERDES_COM_PLL_RCTRL_MODE1 0x088 | |
| #define QSERDES_COM_PLL_CCTRL_MODE0 0x090 | |
| #define QSERDES_COM_PLL_CCTRL_MODE1 0x094 | |
| #define QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x0a8 | |
| #define QSERDES_COM_SYSCLK_EN_SEL 0x0ac | |
| #define QSERDES_COM_RESETSM_CNTRL 0x0b4 | |
| #define QSERDES_COM_RESTRIM_CTRL 0x0bc | |
| #define QSERDES_COM_RESCODE_DIV_NUM 0x0c4 | |
| #define QSERDES_COM_LOCK_CMP_EN 0x0c8 | |
| #define QSERDES_COM_LOCK_CMP_CFG 0x0cc | |
| #define QSERDES_COM_DEC_START_MODE0 0x0d0 | |
| #define QSERDES_COM_DEC_START_MODE1 0x0d4 | |
| #define QSERDES_COM_DIV_FRAC_START1_MODE0 0x0dc | |
| #define QSERDES_COM_DIV_FRAC_START2_MODE0 0x0e0 | |
| #define QSERDES_COM_DIV_FRAC_START3_MODE0 0x0e4 | |
| #define QSERDES_COM_DIV_FRAC_START1_MODE1 0x0e8 | |
| #define QSERDES_COM_DIV_FRAC_START2_MODE1 0x0ec | |
| #define QSERDES_COM_DIV_FRAC_START3_MODE1 0x0f0 | |
| #define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x108 | |
| #define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x10c | |
| #define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x110 | |
| #define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 0x114 | |
| #define QSERDES_COM_VCO_TUNE_CTRL 0x124 | |
| #define QSERDES_COM_VCO_TUNE_MAP 0x128 | |
| #define QSERDES_COM_VCO_TUNE1_MODE0 0x12c | |
| #define QSERDES_COM_VCO_TUNE2_MODE0 0x130 | |
| #define QSERDES_COM_VCO_TUNE1_MODE1 0x134 | |
| #define QSERDES_COM_VCO_TUNE2_MODE1 0x138 | |
| #define QSERDES_COM_VCO_TUNE_TIMER1 0x144 | |
| #define QSERDES_COM_VCO_TUNE_TIMER2 0x148 | |
| #define QSERDES_COM_BG_CTRL 0x170 | |
| #define QSERDES_COM_CLK_SELECT 0x174 | |
| #define QSERDES_COM_HSCLK_SEL 0x178 | |
| #define QSERDES_COM_CORECLK_DIV 0x184 | |
| #define QSERDES_COM_CORE_CLK_EN 0x18c | |
| #define QSERDES_COM_C_READY_STATUS 0x190 | |
| #define QSERDES_COM_CMN_CONFIG 0x194 | |
| #define QSERDES_COM_SVS_MODE_CLK_SEL 0x19c | |
| #define QSERDES_COM_DEBUG_BUS0 0x1a0 | |
| #define QSERDES_COM_DEBUG_BUS1 0x1a4 | |
| #define QSERDES_COM_DEBUG_BUS2 0x1a8 | |
| #define QSERDES_COM_DEBUG_BUS3 0x1ac | |
| #define QSERDES_COM_DEBUG_BUS_SEL 0x1b0 | |
| #define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc | |
| /* QMP PHY TX registers */ | |
| #define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 | |
| #define QSERDES_TX_DEBUG_BUS_SEL 0x064 | |
| #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068 | |
| #define QSERDES_TX_LANE_MODE 0x094 | |
| #define QSERDES_TX_RCV_DETECT_LVL_2 0x0ac | |
| /* QMP PHY RX registers */ | |
| #define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010 | |
| #define QSERDES_RX_UCDR_SO_GAIN 0x01c | |
| #define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040 | |
| #define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048 | |
| #define QSERDES_RX_RX_TERM_BW 0x090 | |
| #define QSERDES_RX_RX_EQ_GAIN1_LSB 0x0c4 | |
| #define QSERDES_RX_RX_EQ_GAIN1_MSB 0x0c8 | |
| #define QSERDES_RX_RX_EQ_GAIN2_LSB 0x0cc | |
| #define QSERDES_RX_RX_EQ_GAIN2_MSB 0x0d0 | |
| #define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8 | |
| #define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x0dc | |
| #define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0e0 | |
| #define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x108 | |
| #define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x10c | |
| #define QSERDES_RX_SIGDET_ENABLES 0x110 | |
| #define QSERDES_RX_SIGDET_CNTRL 0x114 | |
| #define QSERDES_RX_SIGDET_LVL 0x118 | |
| #define QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x11c | |
| #define QSERDES_RX_RX_BAND 0x120 | |
| #define QSERDES_RX_RX_INTERFACE_MODE 0x12c | |
| /* QMP PHY PCS registers */ | |
| #define QPHY_POWER_DOWN_CONTROL 0x04 | |
| #define QPHY_TXDEEMPH_M6DB_V0 0x24 | |
| #define QPHY_TXDEEMPH_M3P5DB_V0 0x28 | |
| #define QPHY_ENDPOINT_REFCLK_DRIVE 0x54 | |
| #define QPHY_RX_IDLE_DTCT_CNTRL 0x58 | |
| #define QPHY_POWER_STATE_CONFIG1 0x60 | |
| #define QPHY_POWER_STATE_CONFIG2 0x64 | |
| #define QPHY_POWER_STATE_CONFIG4 0x6c | |
| #define QPHY_LOCK_DETECT_CONFIG1 0x80 | |
| #define QPHY_LOCK_DETECT_CONFIG2 0x84 | |
| #define QPHY_LOCK_DETECT_CONFIG3 0x88 | |
| #define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK 0xa0 | |
| #define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK 0xa4 | |
| #define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8 | |
| #define QPHY_OSC_DTCT_ACTIONS 0x1AC | |
| #define QPHY_RX_SIGDET_LVL 0x1D8 | |
| #define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC | |
| #define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0 | |
| /* QPHY_SW_RESET bit */ | |
| #define SW_RESET BIT(0) | |
| /* QPHY_POWER_DOWN_CONTROL */ | |
| #define SW_PWRDN BIT(0) | |
| #define REFCLK_DRV_DSBL BIT(1) | |
| /* QPHY_START_CONTROL bits */ | |
| #define SERDES_START BIT(0) | |
| #define PCS_START BIT(1) | |
| #define PLL_READY_GATE_EN BIT(3) | |
| /* QPHY_PCS_STATUS bit */ | |
| #define PHYSTATUS BIT(6) | |
| /* QPHY_COM_PCS_READY_STATUS bit */ | |
| #define PCS_READY BIT(0) | |
| #define PHY_INIT_COMPLETE_TIMEOUT 1000 | |
| #define POWER_DOWN_DELAY_US_MIN 10 | |
| #define POWER_DOWN_DELAY_US_MAX 11 | |
| #define MAX_PROP_NAME 32 | |
| struct qmp_phy_init_tbl { | |
| unsigned int offset; | |
| unsigned int val; | |
| /* | |
| * register part of layout ? | |
| * if yes, then offset gives index in the reg-layout | |
| */ | |
| int in_layout; | |
| }; | |
| #define QMP_PHY_INIT_CFG(o, v) \ | |
| { \ | |
| .offset = o, \ | |
| .val = v, \ | |
| } | |
| #define QMP_PHY_INIT_CFG_L(o, v) \ | |
| { \ | |
| .offset = o, \ | |
| .val = v, \ | |
| .in_layout = 1, \ | |
| } | |
| /* set of registers with offsets different per-PHY */ | |
| enum qphy_reg_layout { | |
| /* Common block control registers */ | |
| QPHY_COM_SW_RESET, | |
| QPHY_COM_POWER_DOWN_CONTROL, | |
| QPHY_COM_START_CONTROL, | |
| QPHY_COM_PCS_READY_STATUS, | |
| /* PCS registers */ | |
| QPHY_PLL_LOCK_CHK_DLY_TIME, | |
| QPHY_FLL_CNTRL1, | |
| QPHY_FLL_CNTRL2, | |
| QPHY_FLL_CNT_VAL_L, | |
| QPHY_FLL_CNT_VAL_H_TOL, | |
| QPHY_FLL_MAN_CODE, | |
| QPHY_SW_RESET, | |
| QPHY_START_CTRL, | |
| QPHY_PCS_READY_STATUS, | |
| }; | |
| static const unsigned int pciephy_regs_layout[] = { | |
| [QPHY_COM_SW_RESET] = 0x400, | |
| [QPHY_COM_POWER_DOWN_CONTROL] = 0x404, | |
| [QPHY_COM_START_CONTROL] = 0x408, | |
| [QPHY_COM_PCS_READY_STATUS] = 0x448, | |
| [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8, | |
| [QPHY_FLL_CNTRL1] = 0xc4, | |
| [QPHY_FLL_CNTRL2] = 0xc8, | |
| [QPHY_FLL_CNT_VAL_L] = 0xcc, | |
| [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0, | |
| [QPHY_FLL_MAN_CODE] = 0xd4, | |
| [QPHY_SW_RESET] = 0x00, | |
| [QPHY_START_CTRL] = 0x08, | |
| [QPHY_PCS_READY_STATUS] = 0x174, | |
| }; | |
| static const unsigned int usb3phy_regs_layout[] = { | |
| [QPHY_FLL_CNTRL1] = 0xc0, | |
| [QPHY_FLL_CNTRL2] = 0xc4, | |
| [QPHY_FLL_CNT_VAL_L] = 0xc8, | |
| [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc, | |
| [QPHY_FLL_MAN_CODE] = 0xd0, | |
| [QPHY_SW_RESET] = 0x00, | |
| [QPHY_START_CTRL] = 0x08, | |
| [QPHY_PCS_READY_STATUS] = 0x17c, | |
| }; | |
| static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40), | |
| }; | |
| static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = { | |
| QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45), | |
| QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06), | |
| }; | |
| static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = { | |
| QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19), | |
| }; | |
| static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = { | |
| QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c), | |
| QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00), | |
| QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01), | |
| QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05), | |
| QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05), | |
| QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02), | |
| QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00), | |
| QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3), | |
| QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e), | |
| }; | |
| static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = { | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04), | |
| /* PLL and Loop filter settings */ | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a), | |
| /* SSC settings */ | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07), | |
| }; | |
| static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = { | |
| QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45), | |
| QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), | |
| QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06), | |
| }; | |
| static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = { | |
| QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16), | |
| }; | |
| static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = { | |
| /* FLL settings */ | |
| QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03), | |
| QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02), | |
| QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09), | |
| QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42), | |
| QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85), | |
| /* Lock Det settings */ | |
| QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1), | |
| QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f), | |
| QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47), | |
| QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08), | |
| }; | |
| static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19), | |
| QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7), | |
| }; | |
| static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { | |
| QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45), | |
| QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6), | |
| QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2), | |
| QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), | |
| }; | |
| static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { | |
| QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4), | |
| QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4), | |
| }; | |
| static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { | |
| QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4), | |
| QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0), | |
| QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40), | |
| QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0), | |
| QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40), | |
| QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0), | |
| QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40), | |
| QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73), | |
| QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99), | |
| QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15), | |
| QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe), | |
| QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0), | |
| QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3), | |
| }; | |
| /* struct qmp_phy_cfg - per-PHY initialization config */ | |
| struct qmp_phy_cfg { | |
| /* phy-type - PCIE/UFS/USB */ | |
| unsigned int type; | |
| /* number of lanes provided by phy */ | |
| int nlanes; | |
| /* Init sequence for PHY blocks - serdes, tx, rx, pcs */ | |
| const struct qmp_phy_init_tbl *serdes_tbl; | |
| int serdes_tbl_num; | |
| const struct qmp_phy_init_tbl *tx_tbl; | |
| int tx_tbl_num; | |
| const struct qmp_phy_init_tbl *rx_tbl; | |
| int rx_tbl_num; | |
| const struct qmp_phy_init_tbl *pcs_tbl; | |
| int pcs_tbl_num; | |
| /* clock ids to be requested */ | |
| const char * const *clk_list; | |
| int num_clks; | |
| /* resets to be requested */ | |
| const char * const *reset_list; | |
| int num_resets; | |
| /* regulators to be requested */ | |
| const char * const *vreg_list; | |
| int num_vregs; | |
| /* array of registers with different offsets */ | |
| const unsigned int *regs; | |
| unsigned int start_ctrl; | |
| unsigned int pwrdn_ctrl; | |
| unsigned int mask_pcs_ready; | |
| unsigned int mask_com_pcs_ready; | |
| /* true, if PHY has a separate PHY_COM control block */ | |
| bool has_phy_com_ctrl; | |
| /* true, if PHY has a reset for individual lanes */ | |
| bool has_lane_rst; | |
| /* true, if PHY needs delay after POWER_DOWN */ | |
| bool has_pwrdn_delay; | |
| /* power_down delay in usec */ | |
| int pwrdn_delay_min; | |
| int pwrdn_delay_max; | |
| }; | |
| /** | |
| * struct qmp_phy - per-lane phy descriptor | |
| * | |
| * @phy: generic phy | |
| * @tx: iomapped memory space for lane's tx | |
| * @rx: iomapped memory space for lane's rx | |
| * @pcs: iomapped memory space for lane's pcs | |
| * @pipe_clk: pipe lock | |
| * @index: lane index | |
| * @qmp: QMP phy to which this lane belongs | |
| * @lane_rst: lane's reset controller | |
| */ | |
| struct qmp_phy { | |
| struct phy *phy; | |
| void __iomem *tx; | |
| void __iomem *rx; | |
| void __iomem *pcs; | |
| struct clk *pipe_clk; | |
| unsigned int index; | |
| struct qcom_qmp *qmp; | |
| struct reset_control *lane_rst; | |
| }; | |
| /** | |
| * struct qcom_qmp - structure holding QMP phy block attributes | |
| * | |
| * @dev: device | |
| * @serdes: iomapped memory space for phy's serdes | |
| * | |
| * @clks: array of clocks required by phy | |
| * @resets: array of resets required by phy | |
| * @vregs: regulator supplies bulk data | |
| * | |
| * @cfg: phy specific configuration | |
| * @phys: array of per-lane phy descriptors | |
| * @phy_mutex: mutex lock for PHY common block initialization | |
| * @init_count: phy common block initialization count | |
| */ | |
| struct qcom_qmp { | |
| struct device *dev; | |
| void __iomem *serdes; | |
| struct clk **clks; | |
| struct reset_control **resets; | |
| struct regulator_bulk_data *vregs; | |
| const struct qmp_phy_cfg *cfg; | |
| struct qmp_phy **phys; | |
| struct mutex phy_mutex; | |
| int init_count; | |
| }; | |
| static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) | |
| { | |
| u32 reg; | |
| reg = readl(base + offset); | |
| reg |= val; | |
| writel(reg, base + offset); | |
| /* ensure that above write is through */ | |
| readl(base + offset); | |
| } | |
| static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val) | |
| { | |
| u32 reg; | |
| reg = readl(base + offset); | |
| reg &= ~val; | |
| writel(reg, base + offset); | |
| /* ensure that above write is through */ | |
| readl(base + offset); | |
| } | |
| /* list of clocks required by phy */ | |
| static const char * const msm8996_phy_clk_l[] = { | |
| "aux", "cfg_ahb", "ref", | |
| }; | |
| /* list of resets */ | |
| static const char * const msm8996_pciephy_reset_l[] = { | |
| "phy", "common", "cfg", | |
| }; | |
| static const char * const msm8996_usb3phy_reset_l[] = { | |
| "phy", "common", | |
| }; | |
| /* list of regulators */ | |
| static const char * const msm8996_phy_vreg_l[] = { | |
| "vdda-phy", "vdda-pll", | |
| }; | |
| static const struct qmp_phy_cfg msm8996_pciephy_cfg = { | |
| .type = PHY_TYPE_PCIE, | |
| .nlanes = 3, | |
| .serdes_tbl = msm8996_pcie_serdes_tbl, | |
| .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl), | |
| .tx_tbl = msm8996_pcie_tx_tbl, | |
| .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl), | |
| .rx_tbl = msm8996_pcie_rx_tbl, | |
| .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl), | |
| .pcs_tbl = msm8996_pcie_pcs_tbl, | |
| .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl), | |
| .clk_list = msm8996_phy_clk_l, | |
| .num_clks = ARRAY_SIZE(msm8996_phy_clk_l), | |
| .reset_list = msm8996_pciephy_reset_l, | |
| .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l), | |
| .vreg_list = msm8996_phy_vreg_l, | |
| .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), | |
| .regs = pciephy_regs_layout, | |
| .start_ctrl = PCS_START | PLL_READY_GATE_EN, | |
| .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, | |
| .mask_com_pcs_ready = PCS_READY, | |
| .has_phy_com_ctrl = true, | |
| .has_lane_rst = true, | |
| .has_pwrdn_delay = true, | |
| .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, | |
| .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, | |
| }; | |
| static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { | |
| .type = PHY_TYPE_USB3, | |
| .nlanes = 1, | |
| .serdes_tbl = msm8996_usb3_serdes_tbl, | |
| .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl), | |
| .tx_tbl = msm8996_usb3_tx_tbl, | |
| .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl), | |
| .rx_tbl = msm8996_usb3_rx_tbl, | |
| .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl), | |
| .pcs_tbl = msm8996_usb3_pcs_tbl, | |
| .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl), | |
| .clk_list = msm8996_phy_clk_l, | |
| .num_clks = ARRAY_SIZE(msm8996_phy_clk_l), | |
| .reset_list = msm8996_usb3phy_reset_l, | |
| .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), | |
| .vreg_list = msm8996_phy_vreg_l, | |
| .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), | |
| .regs = usb3phy_regs_layout, | |
| .start_ctrl = SERDES_START | PCS_START, | |
| .pwrdn_ctrl = SW_PWRDN, | |
| .mask_pcs_ready = PHYSTATUS, | |
| }; | |
| /* list of resets */ | |
| static const char * const ipq8074_pciephy_reset_l[] = { | |
| "phy", "common", | |
| }; | |
| static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { | |
| .type = PHY_TYPE_PCIE, | |
| .nlanes = 1, | |
| .serdes_tbl = ipq8074_pcie_serdes_tbl, | |
| .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl), | |
| .tx_tbl = ipq8074_pcie_tx_tbl, | |
| .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl), | |
| .rx_tbl = ipq8074_pcie_rx_tbl, | |
| .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl), | |
| .pcs_tbl = ipq8074_pcie_pcs_tbl, | |
| .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl), | |
| .clk_list = NULL, | |
| .num_clks = 0, | |
| .reset_list = ipq8074_pciephy_reset_l, | |
| .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), | |
| .vreg_list = NULL, | |
| .num_vregs = 0, | |
| .regs = pciephy_regs_layout, | |
| .start_ctrl = SERDES_START | PCS_START, | |
| .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, | |
| .mask_pcs_ready = PHYSTATUS, | |
| .has_phy_com_ctrl = false, | |
| .has_lane_rst = false, | |
| .has_pwrdn_delay = true, | |
| .pwrdn_delay_min = 995, /* us */ | |
| .pwrdn_delay_max = 1005, /* us */ | |
| }; | |
| static void qcom_qmp_phy_configure(void __iomem *base, | |
| const unsigned int *regs, | |
| const struct qmp_phy_init_tbl tbl[], | |
| int num) | |
| { | |
| int i; | |
| const struct qmp_phy_init_tbl *t = tbl; | |
| if (!t) | |
| return; | |
| for (i = 0; i < num; i++, t++) { | |
| if (t->in_layout) | |
| writel(t->val, base + regs[t->offset]); | |
| else | |
| writel(t->val, base + t->offset); | |
| } | |
| } | |
| static int qcom_qmp_phy_poweron(struct phy *phy) | |
| { | |
| struct qmp_phy *qphy = phy_get_drvdata(phy); | |
| struct qcom_qmp *qmp = qphy->qmp; | |
| int num = qmp->cfg->num_vregs; | |
| int ret; | |
| dev_vdbg(&phy->dev, "Powering on QMP phy\n"); | |
| /* turn on regulator supplies */ | |
| ret = regulator_bulk_enable(num, qmp->vregs); | |
| if (ret) { | |
| dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret); | |
| return ret; | |
| } | |
| ret = clk_prepare_enable(qphy->pipe_clk); | |
| if (ret) { | |
| dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret); | |
| regulator_bulk_disable(num, qmp->vregs); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int qcom_qmp_phy_poweroff(struct phy *phy) | |
| { | |
| struct qmp_phy *qphy = phy_get_drvdata(phy); | |
| struct qcom_qmp *qmp = qphy->qmp; | |
| clk_disable_unprepare(qphy->pipe_clk); | |
| regulator_bulk_disable(qmp->cfg->num_vregs, qmp->vregs); | |
| return 0; | |
| } | |
| static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) | |
| { | |
| const struct qmp_phy_cfg *cfg = qmp->cfg; | |
| void __iomem *serdes = qmp->serdes; | |
| int ret, i; | |
| mutex_lock(&qmp->phy_mutex); | |
| if (qmp->init_count++) { | |
| mutex_unlock(&qmp->phy_mutex); | |
| return 0; | |
| } | |
| for (i = 0; i < cfg->num_resets; i++) { | |
| ret = reset_control_deassert(qmp->resets[i]); | |
| if (ret) { | |
| dev_err(qmp->dev, "%s reset deassert failed\n", | |
| qmp->cfg->reset_list[i]); | |
| goto err_rst; | |
| } | |
| } | |
| if (cfg->has_phy_com_ctrl) | |
| qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], | |
| SW_PWRDN); | |
| /* Serdes configuration */ | |
| qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl, | |
| cfg->serdes_tbl_num); | |
| if (cfg->has_phy_com_ctrl) { | |
| void __iomem *status; | |
| unsigned int mask, val; | |
| qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET); | |
| qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL], | |
| SERDES_START | PCS_START); | |
| status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS]; | |
| mask = cfg->mask_com_pcs_ready; | |
| ret = readl_poll_timeout(status, val, (val & mask), 10, | |
| PHY_INIT_COMPLETE_TIMEOUT); | |
| if (ret) { | |
| dev_err(qmp->dev, | |
| "phy common block init timed-out\n"); | |
| goto err_rst; | |
| } | |
| } | |
| mutex_unlock(&qmp->phy_mutex); | |
| return 0; | |
| err_rst: | |
| while (--i >= 0) | |
| reset_control_assert(qmp->resets[i]); | |
| mutex_unlock(&qmp->phy_mutex); | |
| return ret; | |
| } | |
| static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp) | |
| { | |
| const struct qmp_phy_cfg *cfg = qmp->cfg; | |
| void __iomem *serdes = qmp->serdes; | |
| int i = cfg->num_resets; | |
| mutex_lock(&qmp->phy_mutex); | |
| if (--qmp->init_count) { | |
| mutex_unlock(&qmp->phy_mutex); | |
| return 0; | |
| } | |
| if (cfg->has_phy_com_ctrl) { | |
| qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL], | |
| SERDES_START | PCS_START); | |
| qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], | |
| SW_RESET); | |
| qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], | |
| SW_PWRDN); | |
| } | |
| while (--i >= 0) | |
| reset_control_assert(qmp->resets[i]); | |
| mutex_unlock(&qmp->phy_mutex); | |
| return 0; | |
| } | |
| /* PHY Initialization */ | |
| static int qcom_qmp_phy_init(struct phy *phy) | |
| { | |
| struct qmp_phy *qphy = phy_get_drvdata(phy); | |
| struct qcom_qmp *qmp = qphy->qmp; | |
| const struct qmp_phy_cfg *cfg = qmp->cfg; | |
| void __iomem *tx = qphy->tx; | |
| void __iomem *rx = qphy->rx; | |
| void __iomem *pcs = qphy->pcs; | |
| void __iomem *status; | |
| unsigned int mask, val; | |
| int ret, i; | |
| dev_vdbg(qmp->dev, "Initializing QMP phy\n"); | |
| for (i = 0; i < qmp->cfg->num_clks; i++) { | |
| ret = clk_prepare_enable(qmp->clks[i]); | |
| if (ret) { | |
| dev_err(qmp->dev, "failed to enable %s clk, err=%d\n", | |
| qmp->cfg->clk_list[i], ret); | |
| goto err_clk; | |
| } | |
| } | |
| ret = qcom_qmp_phy_com_init(qmp); | |
| if (ret) | |
| goto err_clk; | |
| if (cfg->has_lane_rst) { | |
| ret = reset_control_deassert(qphy->lane_rst); | |
| if (ret) { | |
| dev_err(qmp->dev, "lane%d reset deassert failed\n", | |
| qphy->index); | |
| goto err_lane_rst; | |
| } | |
| } | |
| /* Tx, Rx, and PCS configurations */ | |
| qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); | |
| qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); | |
| qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); | |
| /* | |
| * Pull out PHY from POWER DOWN state. | |
| * This is active low enable signal to power-down PHY. | |
| */ | |
| qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl); | |
| if (cfg->has_pwrdn_delay) | |
| usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); | |
| /* start SerDes and Phy-Coding-Sublayer */ | |
| qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); | |
| /* Pull PHY out of reset state */ | |
| qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); | |
| status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; | |
| mask = cfg->mask_pcs_ready; | |
| ret = readl_poll_timeout(status, val, !(val & mask), 1, | |
| PHY_INIT_COMPLETE_TIMEOUT); | |
| if (ret) { | |
| dev_err(qmp->dev, "phy initialization timed-out\n"); | |
| goto err_pcs_ready; | |
| } | |
| return ret; | |
| err_pcs_ready: | |
| if (cfg->has_lane_rst) | |
| reset_control_assert(qphy->lane_rst); | |
| err_lane_rst: | |
| qcom_qmp_phy_com_exit(qmp); | |
| err_clk: | |
| while (--i >= 0) | |
| clk_disable_unprepare(qmp->clks[i]); | |
| return ret; | |
| } | |
| static int qcom_qmp_phy_exit(struct phy *phy) | |
| { | |
| struct qmp_phy *qphy = phy_get_drvdata(phy); | |
| struct qcom_qmp *qmp = qphy->qmp; | |
| const struct qmp_phy_cfg *cfg = qmp->cfg; | |
| int i = cfg->num_clks; | |
| /* PHY reset */ | |
| qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); | |
| /* stop SerDes and Phy-Coding-Sublayer */ | |
| qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); | |
| /* Put PHY into POWER DOWN state: active low */ | |
| qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl); | |
| if (cfg->has_lane_rst) | |
| reset_control_assert(qphy->lane_rst); | |
| qcom_qmp_phy_com_exit(qmp); | |
| while (--i >= 0) | |
| clk_disable_unprepare(qmp->clks[i]); | |
| return 0; | |
| } | |
| static int qcom_qmp_phy_vreg_init(struct device *dev) | |
| { | |
| struct qcom_qmp *qmp = dev_get_drvdata(dev); | |
| int num = qmp->cfg->num_vregs; | |
| int i; | |
| qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL); | |
| if (!qmp->vregs) | |
| return -ENOMEM; | |
| for (i = 0; i < num; i++) | |
| qmp->vregs[i].supply = qmp->cfg->vreg_list[i]; | |
| return devm_regulator_bulk_get(dev, num, qmp->vregs); | |
| } | |
| static int qcom_qmp_phy_reset_init(struct device *dev) | |
| { | |
| struct qcom_qmp *qmp = dev_get_drvdata(dev); | |
| int i; | |
| qmp->resets = devm_kcalloc(dev, qmp->cfg->num_resets, | |
| sizeof(*qmp->resets), GFP_KERNEL); | |
| if (!qmp->resets) | |
| return -ENOMEM; | |
| for (i = 0; i < qmp->cfg->num_resets; i++) { | |
| struct reset_control *rst; | |
| const char *name = qmp->cfg->reset_list[i]; | |
| rst = devm_reset_control_get(dev, name); | |
| if (IS_ERR(rst)) { | |
| dev_err(dev, "failed to get %s reset\n", name); | |
| return PTR_ERR(rst); | |
| } | |
| qmp->resets[i] = rst; | |
| } | |
| return 0; | |
| } | |
| static int qcom_qmp_phy_clk_init(struct device *dev) | |
| { | |
| struct qcom_qmp *qmp = dev_get_drvdata(dev); | |
| int ret, i; | |
| qmp->clks = devm_kcalloc(dev, qmp->cfg->num_clks, | |
| sizeof(*qmp->clks), GFP_KERNEL); | |
| if (!qmp->clks) | |
| return -ENOMEM; | |
| for (i = 0; i < qmp->cfg->num_clks; i++) { | |
| struct clk *_clk; | |
| const char *name = qmp->cfg->clk_list[i]; | |
| _clk = devm_clk_get(dev, name); | |
| if (IS_ERR(_clk)) { | |
| ret = PTR_ERR(_clk); | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(dev, "failed to get %s clk, %d\n", | |
| name, ret); | |
| return ret; | |
| } | |
| qmp->clks[i] = _clk; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Register a fixed rate pipe clock. | |
| * | |
| * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate | |
| * controls it. The <s>_pipe_clk coming out of the GCC is requested | |
| * by the PHY driver for its operations. | |
| * We register the <s>_pipe_clksrc here. The gcc driver takes care | |
| * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk. | |
| * Below picture shows this relationship. | |
| * | |
| * +---------------+ | |
| * | PHY block |<<---------------------------------------+ | |
| * | | | | |
| * | +-------+ | +-----+ | | |
| * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+ | |
| * clk | +-------+ | +-----+ | |
| * +---------------+ | |
| */ | |
| static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) | |
| { | |
| struct clk_fixed_rate *fixed; | |
| struct clk_init_data init = { }; | |
| int ret; | |
| if ((qmp->cfg->type != PHY_TYPE_USB3) && | |
| (qmp->cfg->type != PHY_TYPE_PCIE)) { | |
| /* not all phys register pipe clocks, so return success */ | |
| return 0; | |
| } | |
| ret = of_property_read_string(np, "clock-output-names", &init.name); | |
| if (ret) { | |
| dev_err(qmp->dev, "%s: No clock-output-names\n", np->name); | |
| return ret; | |
| } | |
| fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL); | |
| if (!fixed) | |
| return -ENOMEM; | |
| init.ops = &clk_fixed_rate_ops; | |
| /* controllers using QMP phys use 125MHz pipe clock interface */ | |
| fixed->fixed_rate = 125000000; | |
| fixed->hw.init = &init; | |
| return devm_clk_hw_register(qmp->dev, &fixed->hw); | |
| } | |
| static const struct phy_ops qcom_qmp_phy_gen_ops = { | |
| .init = qcom_qmp_phy_init, | |
| .exit = qcom_qmp_phy_exit, | |
| .power_on = qcom_qmp_phy_poweron, | |
| .power_off = qcom_qmp_phy_poweroff, | |
| .owner = THIS_MODULE, | |
| }; | |
| static | |
| int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) | |
| { | |
| struct qcom_qmp *qmp = dev_get_drvdata(dev); | |
| struct phy *generic_phy; | |
| struct qmp_phy *qphy; | |
| char prop_name[MAX_PROP_NAME]; | |
| int ret; | |
| qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); | |
| if (!qphy) | |
| return -ENOMEM; | |
| /* | |
| * Get memory resources for each phy lane: | |
| * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. | |
| */ | |
| qphy->tx = of_iomap(np, 0); | |
| if (!qphy->tx) | |
| return -ENOMEM; | |
| qphy->rx = of_iomap(np, 1); | |
| if (!qphy->rx) | |
| return -ENOMEM; | |
| qphy->pcs = of_iomap(np, 2); | |
| if (!qphy->pcs) | |
| return -ENOMEM; | |
| /* | |
| * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3 | |
| * based phys, so they essentially have pipe clock. So, | |
| * we return error in case phy is USB3 or PIPE type. | |
| * Otherwise, we initialize pipe clock to NULL for | |
| * all phys that don't need this. | |
| */ | |
| snprintf(prop_name, sizeof(prop_name), "pipe%d", id); | |
| qphy->pipe_clk = of_clk_get_by_name(np, prop_name); | |
| if (IS_ERR(qphy->pipe_clk)) { | |
| if (qmp->cfg->type == PHY_TYPE_PCIE || | |
| qmp->cfg->type == PHY_TYPE_USB3) { | |
| ret = PTR_ERR(qphy->pipe_clk); | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(dev, | |
| "failed to get lane%d pipe_clk, %d\n", | |
| id, ret); | |
| return ret; | |
| } | |
| qphy->pipe_clk = NULL; | |
| } | |
| /* Get lane reset, if any */ | |
| if (qmp->cfg->has_lane_rst) { | |
| snprintf(prop_name, sizeof(prop_name), "lane%d", id); | |
| qphy->lane_rst = of_reset_control_get(np, prop_name); | |
| if (IS_ERR(qphy->lane_rst)) { | |
| dev_err(dev, "failed to get lane%d reset\n", id); | |
| return PTR_ERR(qphy->lane_rst); | |
| } | |
| } | |
| generic_phy = devm_phy_create(dev, np, &qcom_qmp_phy_gen_ops); | |
| if (IS_ERR(generic_phy)) { | |
| ret = PTR_ERR(generic_phy); | |
| dev_err(dev, "failed to create qphy %d\n", ret); | |
| return ret; | |
| } | |
| qphy->phy = generic_phy; | |
| qphy->index = id; | |
| qphy->qmp = qmp; | |
| qmp->phys[id] = qphy; | |
| phy_set_drvdata(generic_phy, qphy); | |
| return 0; | |
| } | |
| static const struct of_device_id qcom_qmp_phy_of_match_table[] = { | |
| { | |
| .compatible = "qcom,msm8996-qmp-pcie-phy", | |
| .data = &msm8996_pciephy_cfg, | |
| }, { | |
| .compatible = "qcom,msm8996-qmp-usb3-phy", | |
| .data = &msm8996_usb3phy_cfg, | |
| }, { | |
| .compatible = "qcom,ipq8074-qmp-pcie-phy", | |
| .data = &ipq8074_pciephy_cfg, | |
| }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table); | |
| static int qcom_qmp_phy_probe(struct platform_device *pdev) | |
| { | |
| struct qcom_qmp *qmp; | |
| struct device *dev = &pdev->dev; | |
| struct resource *res; | |
| struct device_node *child; | |
| struct phy_provider *phy_provider; | |
| void __iomem *base; | |
| int num, id; | |
| int ret; | |
| qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL); | |
| if (!qmp) | |
| return -ENOMEM; | |
| qmp->dev = dev; | |
| dev_set_drvdata(dev, qmp); | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| base = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(base)) | |
| return PTR_ERR(base); | |
| /* per PHY serdes; usually located at base address */ | |
| qmp->serdes = base; | |
| mutex_init(&qmp->phy_mutex); | |
| /* Get the specific init parameters of QMP phy */ | |
| qmp->cfg = of_device_get_match_data(dev); | |
| ret = qcom_qmp_phy_clk_init(dev); | |
| if (ret) | |
| return ret; | |
| ret = qcom_qmp_phy_reset_init(dev); | |
| if (ret) | |
| return ret; | |
| ret = qcom_qmp_phy_vreg_init(dev); | |
| if (ret) { | |
| dev_err(dev, "failed to get regulator supplies\n"); | |
| return ret; | |
| } | |
| num = of_get_available_child_count(dev->of_node); | |
| /* do we have a rogue child node ? */ | |
| if (num > qmp->cfg->nlanes) | |
| return -EINVAL; | |
| qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL); | |
| if (!qmp->phys) | |
| return -ENOMEM; | |
| id = 0; | |
| for_each_available_child_of_node(dev->of_node, child) { | |
| /* Create per-lane phy */ | |
| ret = qcom_qmp_phy_create(dev, child, id); | |
| if (ret) { | |
| dev_err(dev, "failed to create lane%d phy, %d\n", | |
| id, ret); | |
| return ret; | |
| } | |
| /* | |
| * Register the pipe clock provided by phy. | |
| * See function description to see details of this pipe clock. | |
| */ | |
| ret = phy_pipe_clk_register(qmp, child); | |
| if (ret) { | |
| dev_err(qmp->dev, | |
| "failed to register pipe clock source\n"); | |
| return ret; | |
| } | |
| id++; | |
| } | |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); | |
| if (!IS_ERR(phy_provider)) | |
| dev_info(dev, "Registered Qcom-QMP phy\n"); | |
| return PTR_ERR_OR_ZERO(phy_provider); | |
| } | |
| static struct platform_driver qcom_qmp_phy_driver = { | |
| .probe = qcom_qmp_phy_probe, | |
| .driver = { | |
| .name = "qcom-qmp-phy", | |
| .of_match_table = qcom_qmp_phy_of_match_table, | |
| }, | |
| }; | |
| module_platform_driver(qcom_qmp_phy_driver); | |
| MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>"); | |
| MODULE_DESCRIPTION("Qualcomm QMP PHY driver"); | |
| MODULE_LICENSE("GPL v2"); |