| /* | |
| * Common power driver for PDAs and phones with one or two external | |
| * power supplies (AC/USB) connected to main and backup batteries, | |
| * and optional builtin charger. | |
| * | |
| * Copyright © 2007 Anton Vorontsov <cbou@mail.ru> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/err.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/notifier.h> | |
| #include <linux/power_supply.h> | |
| #include <linux/pda_power.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/timer.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/usb/otg.h> | |
| static inline unsigned int get_irq_flags(struct resource *res) | |
| { | |
| return IRQF_SHARED | (res->flags & IRQF_TRIGGER_MASK); | |
| } | |
| static struct device *dev; | |
| static struct pda_power_pdata *pdata; | |
| static struct resource *ac_irq, *usb_irq; | |
| static struct delayed_work charger_work; | |
| static struct delayed_work polling_work; | |
| static struct delayed_work supply_work; | |
| static int polling; | |
| static struct power_supply *pda_psy_ac, *pda_psy_usb; | |
| #if IS_ENABLED(CONFIG_USB_PHY) | |
| static struct usb_phy *transceiver; | |
| static struct notifier_block otg_nb; | |
| #endif | |
| static struct regulator *ac_draw; | |
| enum { | |
| PDA_PSY_OFFLINE = 0, | |
| PDA_PSY_ONLINE = 1, | |
| PDA_PSY_TO_CHANGE, | |
| }; | |
| static int new_ac_status = -1; | |
| static int new_usb_status = -1; | |
| static int ac_status = -1; | |
| static int usb_status = -1; | |
| static int pda_power_get_property(struct power_supply *psy, | |
| enum power_supply_property psp, | |
| union power_supply_propval *val) | |
| { | |
| switch (psp) { | |
| case POWER_SUPPLY_PROP_ONLINE: | |
| if (psy->desc->type == POWER_SUPPLY_TYPE_MAINS) | |
| val->intval = pdata->is_ac_online ? | |
| pdata->is_ac_online() : 0; | |
| else | |
| val->intval = pdata->is_usb_online ? | |
| pdata->is_usb_online() : 0; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static enum power_supply_property pda_power_props[] = { | |
| POWER_SUPPLY_PROP_ONLINE, | |
| }; | |
| static char *pda_power_supplied_to[] = { | |
| "main-battery", | |
| "backup-battery", | |
| }; | |
| static const struct power_supply_desc pda_psy_ac_desc = { | |
| .name = "ac", | |
| .type = POWER_SUPPLY_TYPE_MAINS, | |
| .properties = pda_power_props, | |
| .num_properties = ARRAY_SIZE(pda_power_props), | |
| .get_property = pda_power_get_property, | |
| }; | |
| static const struct power_supply_desc pda_psy_usb_desc = { | |
| .name = "usb", | |
| .type = POWER_SUPPLY_TYPE_USB, | |
| .properties = pda_power_props, | |
| .num_properties = ARRAY_SIZE(pda_power_props), | |
| .get_property = pda_power_get_property, | |
| }; | |
| static void update_status(void) | |
| { | |
| if (pdata->is_ac_online) | |
| new_ac_status = !!pdata->is_ac_online(); | |
| if (pdata->is_usb_online) | |
| new_usb_status = !!pdata->is_usb_online(); | |
| } | |
| static void update_charger(void) | |
| { | |
| static int regulator_enabled; | |
| int max_uA = pdata->ac_max_uA; | |
| if (pdata->set_charge) { | |
| if (new_ac_status > 0) { | |
| dev_dbg(dev, "charger on (AC)\n"); | |
| pdata->set_charge(PDA_POWER_CHARGE_AC); | |
| } else if (new_usb_status > 0) { | |
| dev_dbg(dev, "charger on (USB)\n"); | |
| pdata->set_charge(PDA_POWER_CHARGE_USB); | |
| } else { | |
| dev_dbg(dev, "charger off\n"); | |
| pdata->set_charge(0); | |
| } | |
| } else if (ac_draw) { | |
| if (new_ac_status > 0) { | |
| regulator_set_current_limit(ac_draw, max_uA, max_uA); | |
| if (!regulator_enabled) { | |
| dev_dbg(dev, "charger on (AC)\n"); | |
| WARN_ON(regulator_enable(ac_draw)); | |
| regulator_enabled = 1; | |
| } | |
| } else { | |
| if (regulator_enabled) { | |
| dev_dbg(dev, "charger off\n"); | |
| WARN_ON(regulator_disable(ac_draw)); | |
| regulator_enabled = 0; | |
| } | |
| } | |
| } | |
| } | |
| static void supply_work_func(struct work_struct *work) | |
| { | |
| if (ac_status == PDA_PSY_TO_CHANGE) { | |
| ac_status = new_ac_status; | |
| power_supply_changed(pda_psy_ac); | |
| } | |
| if (usb_status == PDA_PSY_TO_CHANGE) { | |
| usb_status = new_usb_status; | |
| power_supply_changed(pda_psy_usb); | |
| } | |
| } | |
| static void psy_changed(void) | |
| { | |
| update_charger(); | |
| /* | |
| * Okay, charger set. Now wait a bit before notifying supplicants, | |
| * charge power should stabilize. | |
| */ | |
| cancel_delayed_work(&supply_work); | |
| schedule_delayed_work(&supply_work, | |
| msecs_to_jiffies(pdata->wait_for_charger)); | |
| } | |
| static void charger_work_func(struct work_struct *work) | |
| { | |
| update_status(); | |
| psy_changed(); | |
| } | |
| static irqreturn_t power_changed_isr(int irq, void *power_supply) | |
| { | |
| if (power_supply == pda_psy_ac) | |
| ac_status = PDA_PSY_TO_CHANGE; | |
| else if (power_supply == pda_psy_usb) | |
| usb_status = PDA_PSY_TO_CHANGE; | |
| else | |
| return IRQ_NONE; | |
| /* | |
| * Wait a bit before reading ac/usb line status and setting charger, | |
| * because ac/usb status readings may lag from irq. | |
| */ | |
| cancel_delayed_work(&charger_work); | |
| schedule_delayed_work(&charger_work, | |
| msecs_to_jiffies(pdata->wait_for_status)); | |
| return IRQ_HANDLED; | |
| } | |
| static void polling_work_func(struct work_struct *work) | |
| { | |
| int changed = 0; | |
| dev_dbg(dev, "polling...\n"); | |
| update_status(); | |
| if (!ac_irq && new_ac_status != ac_status) { | |
| ac_status = PDA_PSY_TO_CHANGE; | |
| changed = 1; | |
| } | |
| if (!usb_irq && new_usb_status != usb_status) { | |
| usb_status = PDA_PSY_TO_CHANGE; | |
| changed = 1; | |
| } | |
| if (changed) | |
| psy_changed(); | |
| cancel_delayed_work(&polling_work); | |
| schedule_delayed_work(&polling_work, | |
| msecs_to_jiffies(pdata->polling_interval)); | |
| } | |
| #if IS_ENABLED(CONFIG_USB_PHY) | |
| static int otg_is_usb_online(void) | |
| { | |
| return (transceiver->last_event == USB_EVENT_VBUS || | |
| transceiver->last_event == USB_EVENT_ENUMERATED); | |
| } | |
| static int otg_is_ac_online(void) | |
| { | |
| return (transceiver->last_event == USB_EVENT_CHARGER); | |
| } | |
| static int otg_handle_notification(struct notifier_block *nb, | |
| unsigned long event, void *unused) | |
| { | |
| switch (event) { | |
| case USB_EVENT_CHARGER: | |
| ac_status = PDA_PSY_TO_CHANGE; | |
| break; | |
| case USB_EVENT_VBUS: | |
| case USB_EVENT_ENUMERATED: | |
| usb_status = PDA_PSY_TO_CHANGE; | |
| break; | |
| case USB_EVENT_NONE: | |
| ac_status = PDA_PSY_TO_CHANGE; | |
| usb_status = PDA_PSY_TO_CHANGE; | |
| break; | |
| default: | |
| return NOTIFY_OK; | |
| } | |
| /* | |
| * Wait a bit before reading ac/usb line status and setting charger, | |
| * because ac/usb status readings may lag from irq. | |
| */ | |
| cancel_delayed_work(&charger_work); | |
| schedule_delayed_work(&charger_work, | |
| msecs_to_jiffies(pdata->wait_for_status)); | |
| return NOTIFY_OK; | |
| } | |
| #endif | |
| static int pda_power_probe(struct platform_device *pdev) | |
| { | |
| struct power_supply_config psy_cfg = {}; | |
| int ret = 0; | |
| dev = &pdev->dev; | |
| if (pdev->id != -1) { | |
| dev_err(dev, "it's meaningless to register several " | |
| "pda_powers; use id = -1\n"); | |
| ret = -EINVAL; | |
| goto wrongid; | |
| } | |
| pdata = pdev->dev.platform_data; | |
| if (pdata->init) { | |
| ret = pdata->init(dev); | |
| if (ret < 0) | |
| goto init_failed; | |
| } | |
| ac_draw = regulator_get(dev, "ac_draw"); | |
| if (IS_ERR(ac_draw)) { | |
| dev_dbg(dev, "couldn't get ac_draw regulator\n"); | |
| ac_draw = NULL; | |
| } | |
| update_status(); | |
| update_charger(); | |
| if (!pdata->wait_for_status) | |
| pdata->wait_for_status = 500; | |
| if (!pdata->wait_for_charger) | |
| pdata->wait_for_charger = 500; | |
| if (!pdata->polling_interval) | |
| pdata->polling_interval = 2000; | |
| if (!pdata->ac_max_uA) | |
| pdata->ac_max_uA = 500000; | |
| INIT_DELAYED_WORK(&charger_work, charger_work_func); | |
| INIT_DELAYED_WORK(&supply_work, supply_work_func); | |
| ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac"); | |
| usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb"); | |
| if (pdata->supplied_to) { | |
| psy_cfg.supplied_to = pdata->supplied_to; | |
| psy_cfg.num_supplicants = pdata->num_supplicants; | |
| } else { | |
| psy_cfg.supplied_to = pda_power_supplied_to; | |
| psy_cfg.num_supplicants = ARRAY_SIZE(pda_power_supplied_to); | |
| } | |
| #if IS_ENABLED(CONFIG_USB_PHY) | |
| transceiver = usb_get_phy(USB_PHY_TYPE_USB2); | |
| if (!IS_ERR_OR_NULL(transceiver)) { | |
| if (!pdata->is_usb_online) | |
| pdata->is_usb_online = otg_is_usb_online; | |
| if (!pdata->is_ac_online) | |
| pdata->is_ac_online = otg_is_ac_online; | |
| } | |
| #endif | |
| if (pdata->is_ac_online) { | |
| pda_psy_ac = power_supply_register(&pdev->dev, | |
| &pda_psy_ac_desc, &psy_cfg); | |
| if (IS_ERR(pda_psy_ac)) { | |
| dev_err(dev, "failed to register %s power supply\n", | |
| pda_psy_ac_desc.name); | |
| ret = PTR_ERR(pda_psy_ac); | |
| goto ac_supply_failed; | |
| } | |
| if (ac_irq) { | |
| ret = request_irq(ac_irq->start, power_changed_isr, | |
| get_irq_flags(ac_irq), ac_irq->name, | |
| pda_psy_ac); | |
| if (ret) { | |
| dev_err(dev, "request ac irq failed\n"); | |
| goto ac_irq_failed; | |
| } | |
| } else { | |
| polling = 1; | |
| } | |
| } | |
| if (pdata->is_usb_online) { | |
| pda_psy_usb = power_supply_register(&pdev->dev, | |
| &pda_psy_usb_desc, | |
| &psy_cfg); | |
| if (IS_ERR(pda_psy_usb)) { | |
| dev_err(dev, "failed to register %s power supply\n", | |
| pda_psy_usb_desc.name); | |
| ret = PTR_ERR(pda_psy_usb); | |
| goto usb_supply_failed; | |
| } | |
| if (usb_irq) { | |
| ret = request_irq(usb_irq->start, power_changed_isr, | |
| get_irq_flags(usb_irq), | |
| usb_irq->name, pda_psy_usb); | |
| if (ret) { | |
| dev_err(dev, "request usb irq failed\n"); | |
| goto usb_irq_failed; | |
| } | |
| } else { | |
| polling = 1; | |
| } | |
| } | |
| #if IS_ENABLED(CONFIG_USB_PHY) | |
| if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier) { | |
| otg_nb.notifier_call = otg_handle_notification; | |
| ret = usb_register_notifier(transceiver, &otg_nb); | |
| if (ret) { | |
| dev_err(dev, "failure to register otg notifier\n"); | |
| goto otg_reg_notifier_failed; | |
| } | |
| polling = 0; | |
| } | |
| #endif | |
| if (polling) { | |
| dev_dbg(dev, "will poll for status\n"); | |
| INIT_DELAYED_WORK(&polling_work, polling_work_func); | |
| cancel_delayed_work(&polling_work); | |
| schedule_delayed_work(&polling_work, | |
| msecs_to_jiffies(pdata->polling_interval)); | |
| } | |
| if (ac_irq || usb_irq) | |
| device_init_wakeup(&pdev->dev, 1); | |
| return 0; | |
| #if IS_ENABLED(CONFIG_USB_PHY) | |
| otg_reg_notifier_failed: | |
| if (pdata->is_usb_online && usb_irq) | |
| free_irq(usb_irq->start, pda_psy_usb); | |
| #endif | |
| usb_irq_failed: | |
| if (pdata->is_usb_online) | |
| power_supply_unregister(pda_psy_usb); | |
| usb_supply_failed: | |
| if (pdata->is_ac_online && ac_irq) | |
| free_irq(ac_irq->start, pda_psy_ac); | |
| #if IS_ENABLED(CONFIG_USB_PHY) | |
| if (!IS_ERR_OR_NULL(transceiver)) | |
| usb_put_phy(transceiver); | |
| #endif | |
| ac_irq_failed: | |
| if (pdata->is_ac_online) | |
| power_supply_unregister(pda_psy_ac); | |
| ac_supply_failed: | |
| if (ac_draw) { | |
| regulator_put(ac_draw); | |
| ac_draw = NULL; | |
| } | |
| if (pdata->exit) | |
| pdata->exit(dev); | |
| init_failed: | |
| wrongid: | |
| return ret; | |
| } | |
| static int pda_power_remove(struct platform_device *pdev) | |
| { | |
| if (pdata->is_usb_online && usb_irq) | |
| free_irq(usb_irq->start, pda_psy_usb); | |
| if (pdata->is_ac_online && ac_irq) | |
| free_irq(ac_irq->start, pda_psy_ac); | |
| if (polling) | |
| cancel_delayed_work_sync(&polling_work); | |
| cancel_delayed_work_sync(&charger_work); | |
| cancel_delayed_work_sync(&supply_work); | |
| if (pdata->is_usb_online) | |
| power_supply_unregister(pda_psy_usb); | |
| if (pdata->is_ac_online) | |
| power_supply_unregister(pda_psy_ac); | |
| #if IS_ENABLED(CONFIG_USB_PHY) | |
| if (!IS_ERR_OR_NULL(transceiver)) | |
| usb_put_phy(transceiver); | |
| #endif | |
| if (ac_draw) { | |
| regulator_put(ac_draw); | |
| ac_draw = NULL; | |
| } | |
| if (pdata->exit) | |
| pdata->exit(dev); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int ac_wakeup_enabled; | |
| static int usb_wakeup_enabled; | |
| static int pda_power_suspend(struct platform_device *pdev, pm_message_t state) | |
| { | |
| if (pdata->suspend) { | |
| int ret = pdata->suspend(state); | |
| if (ret) | |
| return ret; | |
| } | |
| if (device_may_wakeup(&pdev->dev)) { | |
| if (ac_irq) | |
| ac_wakeup_enabled = !enable_irq_wake(ac_irq->start); | |
| if (usb_irq) | |
| usb_wakeup_enabled = !enable_irq_wake(usb_irq->start); | |
| } | |
| return 0; | |
| } | |
| static int pda_power_resume(struct platform_device *pdev) | |
| { | |
| if (device_may_wakeup(&pdev->dev)) { | |
| if (usb_irq && usb_wakeup_enabled) | |
| disable_irq_wake(usb_irq->start); | |
| if (ac_irq && ac_wakeup_enabled) | |
| disable_irq_wake(ac_irq->start); | |
| } | |
| if (pdata->resume) | |
| return pdata->resume(); | |
| return 0; | |
| } | |
| #else | |
| #define pda_power_suspend NULL | |
| #define pda_power_resume NULL | |
| #endif /* CONFIG_PM */ | |
| static struct platform_driver pda_power_pdrv = { | |
| .driver = { | |
| .name = "pda-power", | |
| }, | |
| .probe = pda_power_probe, | |
| .remove = pda_power_remove, | |
| .suspend = pda_power_suspend, | |
| .resume = pda_power_resume, | |
| }; | |
| module_platform_driver(pda_power_pdrv); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>"); | |
| MODULE_ALIAS("platform:pda-power"); |