| /* | |
| * AS3711 PMIC regulator driver, using DCDC Step Down and LDO supplies | |
| * | |
| * Copyright (C) 2012 Renesas Electronics Corporation | |
| * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the version 2 of the GNU General Public License as | |
| * published by the Free Software Foundation | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/mfd/as3711.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/of_regulator.h> | |
| #include <linux/slab.h> | |
| struct as3711_regulator_info { | |
| struct regulator_desc desc; | |
| }; | |
| struct as3711_regulator { | |
| struct as3711_regulator_info *reg_info; | |
| }; | |
| /* | |
| * The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and | |
| * STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes: | |
| * FAST: sdX_fast=1 | |
| * NORMAL: low_noise=1 | |
| * IDLE: low_noise=0 | |
| */ | |
| static int as3711_set_mode_sd(struct regulator_dev *rdev, unsigned int mode) | |
| { | |
| unsigned int fast_bit = rdev->desc->enable_mask, | |
| low_noise_bit = fast_bit << 4; | |
| u8 val; | |
| switch (mode) { | |
| case REGULATOR_MODE_FAST: | |
| val = fast_bit | low_noise_bit; | |
| break; | |
| case REGULATOR_MODE_NORMAL: | |
| val = low_noise_bit; | |
| break; | |
| case REGULATOR_MODE_IDLE: | |
| val = 0; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return regmap_update_bits(rdev->regmap, AS3711_SD_CONTROL_1, | |
| low_noise_bit | fast_bit, val); | |
| } | |
| static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev) | |
| { | |
| unsigned int fast_bit = rdev->desc->enable_mask, | |
| low_noise_bit = fast_bit << 4, mask = fast_bit | low_noise_bit; | |
| unsigned int val; | |
| int ret = regmap_read(rdev->regmap, AS3711_SD_CONTROL_1, &val); | |
| if (ret < 0) | |
| return ret; | |
| if ((val & mask) == mask) | |
| return REGULATOR_MODE_FAST; | |
| if ((val & mask) == low_noise_bit) | |
| return REGULATOR_MODE_NORMAL; | |
| if (!(val & mask)) | |
| return REGULATOR_MODE_IDLE; | |
| return -EINVAL; | |
| } | |
| static const struct regulator_ops as3711_sd_ops = { | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .list_voltage = regulator_list_voltage_linear_range, | |
| .map_voltage = regulator_map_voltage_linear_range, | |
| .get_mode = as3711_get_mode_sd, | |
| .set_mode = as3711_set_mode_sd, | |
| }; | |
| static const struct regulator_ops as3711_aldo_ops = { | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .list_voltage = regulator_list_voltage_linear_range, | |
| .map_voltage = regulator_map_voltage_linear_range, | |
| }; | |
| static const struct regulator_ops as3711_dldo_ops = { | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .list_voltage = regulator_list_voltage_linear_range, | |
| .map_voltage = regulator_map_voltage_linear_range, | |
| }; | |
| static const struct regulator_linear_range as3711_sd_ranges[] = { | |
| REGULATOR_LINEAR_RANGE(612500, 0x1, 0x40, 12500), | |
| REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), | |
| REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7f, 50000), | |
| }; | |
| static const struct regulator_linear_range as3711_aldo_ranges[] = { | |
| REGULATOR_LINEAR_RANGE(1200000, 0, 0xf, 50000), | |
| REGULATOR_LINEAR_RANGE(1800000, 0x10, 0x1f, 100000), | |
| }; | |
| static const struct regulator_linear_range as3711_dldo_ranges[] = { | |
| REGULATOR_LINEAR_RANGE(900000, 0, 0x10, 50000), | |
| REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000), | |
| }; | |
| #define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _sfx) \ | |
| [AS3711_REGULATOR_ ## _id] = { \ | |
| .desc = { \ | |
| .name = "as3711-regulator-" # _id, \ | |
| .id = AS3711_REGULATOR_ ## _id, \ | |
| .n_voltages = (_vmask + 1), \ | |
| .ops = &as3711_ ## _sfx ## _ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .owner = THIS_MODULE, \ | |
| .vsel_reg = AS3711_ ## _id ## _VOLTAGE, \ | |
| .vsel_mask = _vmask, \ | |
| .enable_reg = AS3711_ ## _en_reg, \ | |
| .enable_mask = BIT(_en_bit), \ | |
| .linear_ranges = as3711_ ## _sfx ## _ranges, \ | |
| .n_linear_ranges = ARRAY_SIZE(as3711_ ## _sfx ## _ranges), \ | |
| }, \ | |
| } | |
| static struct as3711_regulator_info as3711_reg_info[] = { | |
| AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, sd), | |
| AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, sd), | |
| AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, sd), | |
| AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, sd), | |
| AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, aldo), | |
| AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, aldo), | |
| AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, dldo), | |
| AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, dldo), | |
| AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, dldo), | |
| AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, dldo), | |
| AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, dldo), | |
| AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, dldo), | |
| /* StepUp output voltage depends on supplying regulator */ | |
| }; | |
| #define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info) | |
| static struct of_regulator_match | |
| as3711_regulator_matches[AS3711_REGULATOR_NUM] = { | |
| [AS3711_REGULATOR_SD_1] = { .name = "sd1" }, | |
| [AS3711_REGULATOR_SD_2] = { .name = "sd2" }, | |
| [AS3711_REGULATOR_SD_3] = { .name = "sd3" }, | |
| [AS3711_REGULATOR_SD_4] = { .name = "sd4" }, | |
| [AS3711_REGULATOR_LDO_1] = { .name = "ldo1" }, | |
| [AS3711_REGULATOR_LDO_2] = { .name = "ldo2" }, | |
| [AS3711_REGULATOR_LDO_3] = { .name = "ldo3" }, | |
| [AS3711_REGULATOR_LDO_4] = { .name = "ldo4" }, | |
| [AS3711_REGULATOR_LDO_5] = { .name = "ldo5" }, | |
| [AS3711_REGULATOR_LDO_6] = { .name = "ldo6" }, | |
| [AS3711_REGULATOR_LDO_7] = { .name = "ldo7" }, | |
| [AS3711_REGULATOR_LDO_8] = { .name = "ldo8" }, | |
| }; | |
| static int as3711_regulator_parse_dt(struct device *dev, | |
| struct device_node **of_node, const int count) | |
| { | |
| struct as3711_regulator_pdata *pdata = dev_get_platdata(dev); | |
| struct device_node *regulators = | |
| of_get_child_by_name(dev->parent->of_node, "regulators"); | |
| struct of_regulator_match *match; | |
| int ret, i; | |
| if (!regulators) { | |
| dev_err(dev, "regulator node not found\n"); | |
| return -ENODEV; | |
| } | |
| ret = of_regulator_match(dev->parent, regulators, | |
| as3711_regulator_matches, count); | |
| of_node_put(regulators); | |
| if (ret < 0) { | |
| dev_err(dev, "Error parsing regulator init data: %d\n", ret); | |
| return ret; | |
| } | |
| for (i = 0, match = as3711_regulator_matches; i < count; i++, match++) | |
| if (match->of_node) { | |
| pdata->init_data[i] = match->init_data; | |
| of_node[i] = match->of_node; | |
| } | |
| return 0; | |
| } | |
| static int as3711_regulator_probe(struct platform_device *pdev) | |
| { | |
| struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev); | |
| struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent); | |
| struct regulator_config config = {.dev = &pdev->dev,}; | |
| struct as3711_regulator *reg = NULL; | |
| struct as3711_regulator *regs; | |
| struct device_node *of_node[AS3711_REGULATOR_NUM] = {}; | |
| struct regulator_dev *rdev; | |
| struct as3711_regulator_info *ri; | |
| int ret; | |
| int id; | |
| if (!pdata) { | |
| dev_err(&pdev->dev, "No platform data...\n"); | |
| return -ENODEV; | |
| } | |
| if (pdev->dev.parent->of_node) { | |
| ret = as3711_regulator_parse_dt(&pdev->dev, of_node, AS3711_REGULATOR_NUM); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "DT parsing failed: %d\n", ret); | |
| return ret; | |
| } | |
| } | |
| regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM * | |
| sizeof(struct as3711_regulator), GFP_KERNEL); | |
| if (!regs) | |
| return -ENOMEM; | |
| for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) { | |
| reg = ®s[id]; | |
| reg->reg_info = ri; | |
| config.init_data = pdata->init_data[id]; | |
| config.driver_data = reg; | |
| config.regmap = as3711->regmap; | |
| config.of_node = of_node[id]; | |
| rdev = devm_regulator_register(&pdev->dev, &ri->desc, &config); | |
| if (IS_ERR(rdev)) { | |
| dev_err(&pdev->dev, "Failed to register regulator %s\n", | |
| ri->desc.name); | |
| return PTR_ERR(rdev); | |
| } | |
| } | |
| platform_set_drvdata(pdev, regs); | |
| return 0; | |
| } | |
| static struct platform_driver as3711_regulator_driver = { | |
| .driver = { | |
| .name = "as3711-regulator", | |
| }, | |
| .probe = as3711_regulator_probe, | |
| }; | |
| static int __init as3711_regulator_init(void) | |
| { | |
| return platform_driver_register(&as3711_regulator_driver); | |
| } | |
| subsys_initcall(as3711_regulator_init); | |
| static void __exit as3711_regulator_exit(void) | |
| { | |
| platform_driver_unregister(&as3711_regulator_driver); | |
| } | |
| module_exit(as3711_regulator_exit); | |
| MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); | |
| MODULE_DESCRIPTION("AS3711 regulator driver"); | |
| MODULE_ALIAS("platform:as3711-regulator"); | |
| MODULE_LICENSE("GPL v2"); |