| /* | |
| * core.c - DesignWare HS OTG Controller common routines | |
| * | |
| * Copyright (C) 2004-2013 Synopsys, Inc. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. The names of the above-listed copyright holders may not be used | |
| * to endorse or promote products derived from this software without | |
| * specific prior written permission. | |
| * | |
| * ALTERNATIVELY, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") as published by the Free Software | |
| * Foundation; either version 2 of the License, or (at your option) any | |
| * later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS | |
| * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, | |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR | |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR | |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| /* | |
| * The Core code provides basic services for accessing and managing the | |
| * DWC_otg hardware. These services are used by both the Host Controller | |
| * Driver and the Peripheral Controller Driver. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/delay.h> | |
| #include <linux/io.h> | |
| #include <linux/slab.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/hcd.h> | |
| #include <linux/usb/ch11.h> | |
| #include "core.h" | |
| #include "hcd.h" | |
| /** | |
| * dwc2_backup_global_registers() - Backup global controller registers. | |
| * When suspending usb bus, registers needs to be backuped | |
| * if controller power is disabled once suspended. | |
| * | |
| * @hsotg: Programming view of the DWC_otg controller | |
| */ | |
| static int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg) | |
| { | |
| struct dwc2_gregs_backup *gr; | |
| int i; | |
| /* Backup global regs */ | |
| gr = &hsotg->gr_backup; | |
| gr->gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); | |
| gr->gintmsk = dwc2_readl(hsotg->regs + GINTMSK); | |
| gr->gahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); | |
| gr->gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); | |
| gr->grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ); | |
| gr->gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); | |
| gr->hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ); | |
| gr->gdfifocfg = dwc2_readl(hsotg->regs + GDFIFOCFG); | |
| for (i = 0; i < MAX_EPS_CHANNELS; i++) | |
| gr->dtxfsiz[i] = dwc2_readl(hsotg->regs + DPTXFSIZN(i)); | |
| gr->valid = true; | |
| return 0; | |
| } | |
| /** | |
| * dwc2_restore_global_registers() - Restore controller global registers. | |
| * When resuming usb bus, device registers needs to be restored | |
| * if controller power were disabled. | |
| * | |
| * @hsotg: Programming view of the DWC_otg controller | |
| */ | |
| static int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg) | |
| { | |
| struct dwc2_gregs_backup *gr; | |
| int i; | |
| dev_dbg(hsotg->dev, "%s\n", __func__); | |
| /* Restore global regs */ | |
| gr = &hsotg->gr_backup; | |
| if (!gr->valid) { | |
| dev_err(hsotg->dev, "%s: no global registers to restore\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| gr->valid = false; | |
| dwc2_writel(0xffffffff, hsotg->regs + GINTSTS); | |
| dwc2_writel(gr->gotgctl, hsotg->regs + GOTGCTL); | |
| dwc2_writel(gr->gintmsk, hsotg->regs + GINTMSK); | |
| dwc2_writel(gr->gusbcfg, hsotg->regs + GUSBCFG); | |
| dwc2_writel(gr->gahbcfg, hsotg->regs + GAHBCFG); | |
| dwc2_writel(gr->grxfsiz, hsotg->regs + GRXFSIZ); | |
| dwc2_writel(gr->gnptxfsiz, hsotg->regs + GNPTXFSIZ); | |
| dwc2_writel(gr->hptxfsiz, hsotg->regs + HPTXFSIZ); | |
| dwc2_writel(gr->gdfifocfg, hsotg->regs + GDFIFOCFG); | |
| for (i = 0; i < MAX_EPS_CHANNELS; i++) | |
| dwc2_writel(gr->dtxfsiz[i], hsotg->regs + DPTXFSIZN(i)); | |
| return 0; | |
| } | |
| /** | |
| * dwc2_exit_hibernation() - Exit controller from Partial Power Down. | |
| * | |
| * @hsotg: Programming view of the DWC_otg controller | |
| * @restore: Controller registers need to be restored | |
| */ | |
| int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore) | |
| { | |
| u32 pcgcctl; | |
| int ret = 0; | |
| if (!hsotg->params.hibernation) | |
| return -ENOTSUPP; | |
| pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); | |
| pcgcctl &= ~PCGCTL_STOPPCLK; | |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); | |
| pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); | |
| pcgcctl &= ~PCGCTL_PWRCLMP; | |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); | |
| pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); | |
| pcgcctl &= ~PCGCTL_RSTPDWNMODULE; | |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); | |
| udelay(100); | |
| if (restore) { | |
| ret = dwc2_restore_global_registers(hsotg); | |
| if (ret) { | |
| dev_err(hsotg->dev, "%s: failed to restore registers\n", | |
| __func__); | |
| return ret; | |
| } | |
| if (dwc2_is_host_mode(hsotg)) { | |
| ret = dwc2_restore_host_registers(hsotg); | |
| if (ret) { | |
| dev_err(hsotg->dev, "%s: failed to restore host registers\n", | |
| __func__); | |
| return ret; | |
| } | |
| } else { | |
| ret = dwc2_restore_device_registers(hsotg); | |
| if (ret) { | |
| dev_err(hsotg->dev, "%s: failed to restore device registers\n", | |
| __func__); | |
| return ret; | |
| } | |
| } | |
| } | |
| return ret; | |
| } | |
| /** | |
| * dwc2_enter_hibernation() - Put controller in Partial Power Down. | |
| * | |
| * @hsotg: Programming view of the DWC_otg controller | |
| */ | |
| int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg) | |
| { | |
| u32 pcgcctl; | |
| int ret = 0; | |
| if (!hsotg->params.hibernation) | |
| return -ENOTSUPP; | |
| /* Backup all registers */ | |
| ret = dwc2_backup_global_registers(hsotg); | |
| if (ret) { | |
| dev_err(hsotg->dev, "%s: failed to backup global registers\n", | |
| __func__); | |
| return ret; | |
| } | |
| if (dwc2_is_host_mode(hsotg)) { | |
| ret = dwc2_backup_host_registers(hsotg); | |
| if (ret) { | |
| dev_err(hsotg->dev, "%s: failed to backup host registers\n", | |
| __func__); | |
| return ret; | |
| } | |
| } else { | |
| ret = dwc2_backup_device_registers(hsotg); | |
| if (ret) { | |
| dev_err(hsotg->dev, "%s: failed to backup device registers\n", | |
| __func__); | |
| return ret; | |
| } | |
| } | |
| /* | |
| * Clear any pending interrupts since dwc2 will not be able to | |
| * clear them after entering hibernation. | |
| */ | |
| dwc2_writel(0xffffffff, hsotg->regs + GINTSTS); | |
| /* Put the controller in low power state */ | |
| pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); | |
| pcgcctl |= PCGCTL_PWRCLMP; | |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); | |
| ndelay(20); | |
| pcgcctl |= PCGCTL_RSTPDWNMODULE; | |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); | |
| ndelay(20); | |
| pcgcctl |= PCGCTL_STOPPCLK; | |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); | |
| return ret; | |
| } | |
| /** | |
| * dwc2_wait_for_mode() - Waits for the controller mode. | |
| * @hsotg: Programming view of the DWC_otg controller. | |
| * @host_mode: If true, waits for host mode, otherwise device mode. | |
| */ | |
| static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg, | |
| bool host_mode) | |
| { | |
| ktime_t start; | |
| ktime_t end; | |
| unsigned int timeout = 110; | |
| dev_vdbg(hsotg->dev, "Waiting for %s mode\n", | |
| host_mode ? "host" : "device"); | |
| start = ktime_get(); | |
| while (1) { | |
| s64 ms; | |
| if (dwc2_is_host_mode(hsotg) == host_mode) { | |
| dev_vdbg(hsotg->dev, "%s mode set\n", | |
| host_mode ? "Host" : "Device"); | |
| break; | |
| } | |
| end = ktime_get(); | |
| ms = ktime_to_ms(ktime_sub(end, start)); | |
| if (ms >= (s64)timeout) { | |
| dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n", | |
| __func__, host_mode ? "host" : "device"); | |
| break; | |
| } | |
| usleep_range(1000, 2000); | |
| } | |
| } | |
| /** | |
| * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce | |
| * filter is enabled. | |
| */ | |
| static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg) | |
| { | |
| u32 gsnpsid; | |
| u32 ghwcfg4; | |
| if (!dwc2_hw_is_otg(hsotg)) | |
| return false; | |
| /* Check if core configuration includes the IDDIG filter. */ | |
| ghwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4); | |
| if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN)) | |
| return false; | |
| /* | |
| * Check if the IDDIG debounce filter is bypassed. Available | |
| * in core version >= 3.10a. | |
| */ | |
| gsnpsid = dwc2_readl(hsotg->regs + GSNPSID); | |
| if (gsnpsid >= DWC2_CORE_REV_3_10a) { | |
| u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); | |
| if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS) | |
| return false; | |
| } | |
| return true; | |
| } | |
| /* | |
| * Do core a soft reset of the core. Be careful with this because it | |
| * resets all the internal state machines of the core. | |
| */ | |
| int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) | |
| { | |
| u32 greset; | |
| int count = 0; | |
| bool wait_for_host_mode = false; | |
| dev_vdbg(hsotg->dev, "%s()\n", __func__); | |
| /* | |
| * If the current mode is host, either due to the force mode | |
| * bit being set (which persists after core reset) or the | |
| * connector id pin, a core soft reset will temporarily reset | |
| * the mode to device. A delay from the IDDIG debounce filter | |
| * will occur before going back to host mode. | |
| * | |
| * Determine whether we will go back into host mode after a | |
| * reset and account for this delay after the reset. | |
| */ | |
| if (dwc2_iddig_filter_enabled(hsotg)) { | |
| u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); | |
| u32 gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); | |
| if (!(gotgctl & GOTGCTL_CONID_B) || | |
| (gusbcfg & GUSBCFG_FORCEHOSTMODE)) { | |
| wait_for_host_mode = true; | |
| } | |
| } | |
| /* Core Soft Reset */ | |
| greset = dwc2_readl(hsotg->regs + GRSTCTL); | |
| greset |= GRSTCTL_CSFTRST; | |
| dwc2_writel(greset, hsotg->regs + GRSTCTL); | |
| do { | |
| udelay(1); | |
| greset = dwc2_readl(hsotg->regs + GRSTCTL); | |
| if (++count > 50) { | |
| dev_warn(hsotg->dev, | |
| "%s() HANG! Soft Reset GRSTCTL=%0x\n", | |
| __func__, greset); | |
| return -EBUSY; | |
| } | |
| } while (greset & GRSTCTL_CSFTRST); | |
| /* Wait for AHB master IDLE state */ | |
| count = 0; | |
| do { | |
| udelay(1); | |
| greset = dwc2_readl(hsotg->regs + GRSTCTL); | |
| if (++count > 50) { | |
| dev_warn(hsotg->dev, | |
| "%s() HANG! AHB Idle GRSTCTL=%0x\n", | |
| __func__, greset); | |
| return -EBUSY; | |
| } | |
| } while (!(greset & GRSTCTL_AHBIDLE)); | |
| if (wait_for_host_mode && !skip_wait) | |
| dwc2_wait_for_mode(hsotg, true); | |
| return 0; | |
| } | |
| /* | |
| * Force the mode of the controller. | |
| * | |
| * Forcing the mode is needed for two cases: | |
| * | |
| * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the | |
| * controller to stay in a particular mode regardless of ID pin | |
| * changes. We do this usually after a core reset. | |
| * | |
| * 2) During probe we want to read reset values of the hw | |
| * configuration registers that are only available in either host or | |
| * device mode. We may need to force the mode if the current mode does | |
| * not allow us to access the register in the mode that we want. | |
| * | |
| * In either case it only makes sense to force the mode if the | |
| * controller hardware is OTG capable. | |
| * | |
| * Checks are done in this function to determine whether doing a force | |
| * would be valid or not. | |
| * | |
| * If a force is done, it requires a IDDIG debounce filter delay if | |
| * the filter is configured and enabled. We poll the current mode of | |
| * the controller to account for this delay. | |
| */ | |
| static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) | |
| { | |
| u32 gusbcfg; | |
| u32 set; | |
| u32 clear; | |
| dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device"); | |
| /* | |
| * Force mode has no effect if the hardware is not OTG. | |
| */ | |
| if (!dwc2_hw_is_otg(hsotg)) | |
| return false; | |
| /* | |
| * If dr_mode is either peripheral or host only, there is no | |
| * need to ever force the mode to the opposite mode. | |
| */ | |
| if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)) | |
| return false; | |
| if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST)) | |
| return false; | |
| gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); | |
| set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE; | |
| clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE; | |
| gusbcfg &= ~clear; | |
| gusbcfg |= set; | |
| dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); | |
| dwc2_wait_for_mode(hsotg, host); | |
| return true; | |
| } | |
| /** | |
| * dwc2_clear_force_mode() - Clears the force mode bits. | |
| * | |
| * After clearing the bits, wait up to 100 ms to account for any | |
| * potential IDDIG filter delay. We can't know if we expect this delay | |
| * or not because the value of the connector ID status is affected by | |
| * the force mode. We only need to call this once during probe if | |
| * dr_mode == OTG. | |
| */ | |
| void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) | |
| { | |
| u32 gusbcfg; | |
| gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); | |
| gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; | |
| gusbcfg &= ~GUSBCFG_FORCEDEVMODE; | |
| dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); | |
| if (dwc2_iddig_filter_enabled(hsotg)) | |
| msleep(100); | |
| } | |
| /* | |
| * Sets or clears force mode based on the dr_mode parameter. | |
| */ | |
| void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg) | |
| { | |
| bool ret; | |
| switch (hsotg->dr_mode) { | |
| case USB_DR_MODE_HOST: | |
| ret = dwc2_force_mode(hsotg, true); | |
| /* | |
| * NOTE: This is required for some rockchip soc based | |
| * platforms on their host-only dwc2. | |
| */ | |
| if (!ret) | |
| msleep(50); | |
| break; | |
| case USB_DR_MODE_PERIPHERAL: | |
| dwc2_force_mode(hsotg, false); | |
| break; | |
| case USB_DR_MODE_OTG: | |
| dwc2_clear_force_mode(hsotg); | |
| break; | |
| default: | |
| dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n", | |
| __func__, hsotg->dr_mode); | |
| break; | |
| } | |
| } | |
| /* | |
| * Do core a soft reset of the core. Be careful with this because it | |
| * resets all the internal state machines of the core. | |
| * | |
| * Additionally this will apply force mode as per the hsotg->dr_mode | |
| * parameter. | |
| */ | |
| int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg) | |
| { | |
| int retval; | |
| retval = dwc2_core_reset(hsotg, false); | |
| if (retval) | |
| return retval; | |
| dwc2_force_dr_mode(hsotg); | |
| return 0; | |
| } | |
| /** | |
| * dwc2_dump_host_registers() - Prints the host registers | |
| * | |
| * @hsotg: Programming view of DWC_otg controller | |
| * | |
| * NOTE: This function will be removed once the peripheral controller code | |
| * is integrated and the driver is stable | |
| */ | |
| void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg) | |
| { | |
| #ifdef DEBUG | |
| u32 __iomem *addr; | |
| int i; | |
| dev_dbg(hsotg->dev, "Host Global Registers\n"); | |
| addr = hsotg->regs + HCFG; | |
| dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HFIR; | |
| dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HFNUM; | |
| dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HPTXSTS; | |
| dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HAINT; | |
| dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HAINTMSK; | |
| dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| if (hsotg->params.dma_desc_enable) { | |
| addr = hsotg->regs + HFLBADDR; | |
| dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| } | |
| addr = hsotg->regs + HPRT0; | |
| dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| for (i = 0; i < hsotg->params.host_channels; i++) { | |
| dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i); | |
| addr = hsotg->regs + HCCHAR(i); | |
| dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HCSPLT(i); | |
| dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HCINT(i); | |
| dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HCINTMSK(i); | |
| dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HCTSIZ(i); | |
| dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HCDMA(i); | |
| dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| if (hsotg->params.dma_desc_enable) { | |
| addr = hsotg->regs + HCDMAB(i); | |
| dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| } | |
| } | |
| #endif | |
| } | |
| /** | |
| * dwc2_dump_global_registers() - Prints the core global registers | |
| * | |
| * @hsotg: Programming view of DWC_otg controller | |
| * | |
| * NOTE: This function will be removed once the peripheral controller code | |
| * is integrated and the driver is stable | |
| */ | |
| void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg) | |
| { | |
| #ifdef DEBUG | |
| u32 __iomem *addr; | |
| dev_dbg(hsotg->dev, "Core Global Registers\n"); | |
| addr = hsotg->regs + GOTGCTL; | |
| dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GOTGINT; | |
| dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GAHBCFG; | |
| dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GUSBCFG; | |
| dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GRSTCTL; | |
| dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GINTSTS; | |
| dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GINTMSK; | |
| dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GRXSTSR; | |
| dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GRXFSIZ; | |
| dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GNPTXFSIZ; | |
| dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GNPTXSTS; | |
| dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GI2CCTL; | |
| dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GPVNDCTL; | |
| dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GGPIO; | |
| dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GUID; | |
| dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GSNPSID; | |
| dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GHWCFG1; | |
| dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GHWCFG2; | |
| dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GHWCFG3; | |
| dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GHWCFG4; | |
| dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GLPMCFG; | |
| dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GPWRDN; | |
| dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + GDFIFOCFG; | |
| dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + HPTXFSIZ; | |
| dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| addr = hsotg->regs + PCGCTL; | |
| dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n", | |
| (unsigned long)addr, dwc2_readl(addr)); | |
| #endif | |
| } | |
| /** | |
| * dwc2_flush_tx_fifo() - Flushes a Tx FIFO | |
| * | |
| * @hsotg: Programming view of DWC_otg controller | |
| * @num: Tx FIFO to flush | |
| */ | |
| void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num) | |
| { | |
| u32 greset; | |
| int count = 0; | |
| dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num); | |
| greset = GRSTCTL_TXFFLSH; | |
| greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK; | |
| dwc2_writel(greset, hsotg->regs + GRSTCTL); | |
| do { | |
| greset = dwc2_readl(hsotg->regs + GRSTCTL); | |
| if (++count > 10000) { | |
| dev_warn(hsotg->dev, | |
| "%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", | |
| __func__, greset, | |
| dwc2_readl(hsotg->regs + GNPTXSTS)); | |
| break; | |
| } | |
| udelay(1); | |
| } while (greset & GRSTCTL_TXFFLSH); | |
| /* Wait for at least 3 PHY Clocks */ | |
| udelay(1); | |
| } | |
| /** | |
| * dwc2_flush_rx_fifo() - Flushes the Rx FIFO | |
| * | |
| * @hsotg: Programming view of DWC_otg controller | |
| */ | |
| void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg) | |
| { | |
| u32 greset; | |
| int count = 0; | |
| dev_vdbg(hsotg->dev, "%s()\n", __func__); | |
| greset = GRSTCTL_RXFFLSH; | |
| dwc2_writel(greset, hsotg->regs + GRSTCTL); | |
| do { | |
| greset = dwc2_readl(hsotg->regs + GRSTCTL); | |
| if (++count > 10000) { | |
| dev_warn(hsotg->dev, "%s() HANG! GRSTCTL=%0x\n", | |
| __func__, greset); | |
| break; | |
| } | |
| udelay(1); | |
| } while (greset & GRSTCTL_RXFFLSH); | |
| /* Wait for at least 3 PHY Clocks */ | |
| udelay(1); | |
| } | |
| /* | |
| * Forces either host or device mode if the controller is not | |
| * currently in that mode. | |
| * | |
| * Returns true if the mode was forced. | |
| */ | |
| bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host) | |
| { | |
| if (host && dwc2_is_host_mode(hsotg)) | |
| return false; | |
| else if (!host && dwc2_is_device_mode(hsotg)) | |
| return false; | |
| return dwc2_force_mode(hsotg, host); | |
| } | |
| bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg) | |
| { | |
| if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff) | |
| return false; | |
| else | |
| return true; | |
| } | |
| /** | |
| * dwc2_enable_global_interrupts() - Enables the controller's Global | |
| * Interrupt in the AHB Config register | |
| * | |
| * @hsotg: Programming view of DWC_otg controller | |
| */ | |
| void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg) | |
| { | |
| u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); | |
| ahbcfg |= GAHBCFG_GLBL_INTR_EN; | |
| dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG); | |
| } | |
| /** | |
| * dwc2_disable_global_interrupts() - Disables the controller's Global | |
| * Interrupt in the AHB Config register | |
| * | |
| * @hsotg: Programming view of DWC_otg controller | |
| */ | |
| void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg) | |
| { | |
| u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); | |
| ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; | |
| dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG); | |
| } | |
| /* Returns the controller's GHWCFG2.OTG_MODE. */ | |
| unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg) | |
| { | |
| u32 ghwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2); | |
| return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >> | |
| GHWCFG2_OP_MODE_SHIFT; | |
| } | |
| /* Returns true if the controller is capable of DRD. */ | |
| bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg) | |
| { | |
| unsigned int op_mode = dwc2_op_mode(hsotg); | |
| return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) || | |
| (op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) || | |
| (op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE); | |
| } | |
| /* Returns true if the controller is host-only. */ | |
| bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg) | |
| { | |
| unsigned int op_mode = dwc2_op_mode(hsotg); | |
| return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) || | |
| (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST); | |
| } | |
| /* Returns true if the controller is device-only. */ | |
| bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg) | |
| { | |
| unsigned int op_mode = dwc2_op_mode(hsotg); | |
| return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || | |
| (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE); | |
| } | |
| MODULE_DESCRIPTION("DESIGNWARE HS OTG Core"); | |
| MODULE_AUTHOR("Synopsys, Inc."); | |
| MODULE_LICENSE("Dual BSD/GPL"); |