| /* | |
| * S6E63M0 AMOLED LCD panel driver. | |
| * | |
| * Author: InKi Dae <inki.dae@samsung.com> | |
| * | |
| * Derived from drivers/video/omap/lcd-apollon.c | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/backlight.h> | |
| #include <linux/delay.h> | |
| #include <linux/fb.h> | |
| #include <linux/gpio.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/kernel.h> | |
| #include <linux/lcd.h> | |
| #include <linux/module.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/wait.h> | |
| #include "s6e63m0_gamma.h" | |
| #define SLEEPMSEC 0x1000 | |
| #define ENDDEF 0x2000 | |
| #define DEFMASK 0xFF00 | |
| #define COMMAND_ONLY 0xFE | |
| #define DATA_ONLY 0xFF | |
| #define MIN_BRIGHTNESS 0 | |
| #define MAX_BRIGHTNESS 10 | |
| struct s6e63m0 { | |
| struct device *dev; | |
| struct spi_device *spi; | |
| unsigned int power; | |
| unsigned int current_brightness; | |
| unsigned int gamma_mode; | |
| unsigned int gamma_table_count; | |
| struct lcd_device *ld; | |
| struct backlight_device *bd; | |
| struct lcd_platform_data *lcd_pd; | |
| }; | |
| static const unsigned short seq_panel_condition_set[] = { | |
| 0xF8, 0x01, | |
| DATA_ONLY, 0x27, | |
| DATA_ONLY, 0x27, | |
| DATA_ONLY, 0x07, | |
| DATA_ONLY, 0x07, | |
| DATA_ONLY, 0x54, | |
| DATA_ONLY, 0x9f, | |
| DATA_ONLY, 0x63, | |
| DATA_ONLY, 0x86, | |
| DATA_ONLY, 0x1a, | |
| DATA_ONLY, 0x33, | |
| DATA_ONLY, 0x0d, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_display_condition_set[] = { | |
| 0xf2, 0x02, | |
| DATA_ONLY, 0x03, | |
| DATA_ONLY, 0x1c, | |
| DATA_ONLY, 0x10, | |
| DATA_ONLY, 0x10, | |
| 0xf7, 0x03, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_gamma_setting[] = { | |
| 0xfa, 0x00, | |
| DATA_ONLY, 0x18, | |
| DATA_ONLY, 0x08, | |
| DATA_ONLY, 0x24, | |
| DATA_ONLY, 0x64, | |
| DATA_ONLY, 0x56, | |
| DATA_ONLY, 0x33, | |
| DATA_ONLY, 0xb6, | |
| DATA_ONLY, 0xba, | |
| DATA_ONLY, 0xa8, | |
| DATA_ONLY, 0xac, | |
| DATA_ONLY, 0xb1, | |
| DATA_ONLY, 0x9d, | |
| DATA_ONLY, 0xc1, | |
| DATA_ONLY, 0xc1, | |
| DATA_ONLY, 0xb7, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x9c, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x9f, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0xd6, | |
| 0xfa, 0x01, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_etc_condition_set[] = { | |
| 0xf6, 0x00, | |
| DATA_ONLY, 0x8c, | |
| DATA_ONLY, 0x07, | |
| 0xb3, 0xc, | |
| 0xb5, 0x2c, | |
| DATA_ONLY, 0x12, | |
| DATA_ONLY, 0x0c, | |
| DATA_ONLY, 0x0a, | |
| DATA_ONLY, 0x10, | |
| DATA_ONLY, 0x0e, | |
| DATA_ONLY, 0x17, | |
| DATA_ONLY, 0x13, | |
| DATA_ONLY, 0x1f, | |
| DATA_ONLY, 0x1a, | |
| DATA_ONLY, 0x2a, | |
| DATA_ONLY, 0x24, | |
| DATA_ONLY, 0x1f, | |
| DATA_ONLY, 0x1b, | |
| DATA_ONLY, 0x1a, | |
| DATA_ONLY, 0x17, | |
| DATA_ONLY, 0x2b, | |
| DATA_ONLY, 0x26, | |
| DATA_ONLY, 0x22, | |
| DATA_ONLY, 0x20, | |
| DATA_ONLY, 0x3a, | |
| DATA_ONLY, 0x34, | |
| DATA_ONLY, 0x30, | |
| DATA_ONLY, 0x2c, | |
| DATA_ONLY, 0x29, | |
| DATA_ONLY, 0x26, | |
| DATA_ONLY, 0x25, | |
| DATA_ONLY, 0x23, | |
| DATA_ONLY, 0x21, | |
| DATA_ONLY, 0x20, | |
| DATA_ONLY, 0x1e, | |
| DATA_ONLY, 0x1e, | |
| 0xb6, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x11, | |
| DATA_ONLY, 0x22, | |
| DATA_ONLY, 0x33, | |
| DATA_ONLY, 0x44, | |
| DATA_ONLY, 0x44, | |
| DATA_ONLY, 0x44, | |
| DATA_ONLY, 0x55, | |
| DATA_ONLY, 0x55, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| 0xb7, 0x2c, | |
| DATA_ONLY, 0x12, | |
| DATA_ONLY, 0x0c, | |
| DATA_ONLY, 0x0a, | |
| DATA_ONLY, 0x10, | |
| DATA_ONLY, 0x0e, | |
| DATA_ONLY, 0x17, | |
| DATA_ONLY, 0x13, | |
| DATA_ONLY, 0x1f, | |
| DATA_ONLY, 0x1a, | |
| DATA_ONLY, 0x2a, | |
| DATA_ONLY, 0x24, | |
| DATA_ONLY, 0x1f, | |
| DATA_ONLY, 0x1b, | |
| DATA_ONLY, 0x1a, | |
| DATA_ONLY, 0x17, | |
| DATA_ONLY, 0x2b, | |
| DATA_ONLY, 0x26, | |
| DATA_ONLY, 0x22, | |
| DATA_ONLY, 0x20, | |
| DATA_ONLY, 0x3a, | |
| DATA_ONLY, 0x34, | |
| DATA_ONLY, 0x30, | |
| DATA_ONLY, 0x2c, | |
| DATA_ONLY, 0x29, | |
| DATA_ONLY, 0x26, | |
| DATA_ONLY, 0x25, | |
| DATA_ONLY, 0x23, | |
| DATA_ONLY, 0x21, | |
| DATA_ONLY, 0x20, | |
| DATA_ONLY, 0x1e, | |
| DATA_ONLY, 0x1e, | |
| 0xb8, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x11, | |
| DATA_ONLY, 0x22, | |
| DATA_ONLY, 0x33, | |
| DATA_ONLY, 0x44, | |
| DATA_ONLY, 0x44, | |
| DATA_ONLY, 0x44, | |
| DATA_ONLY, 0x55, | |
| DATA_ONLY, 0x55, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| 0xb9, 0x2c, | |
| DATA_ONLY, 0x12, | |
| DATA_ONLY, 0x0c, | |
| DATA_ONLY, 0x0a, | |
| DATA_ONLY, 0x10, | |
| DATA_ONLY, 0x0e, | |
| DATA_ONLY, 0x17, | |
| DATA_ONLY, 0x13, | |
| DATA_ONLY, 0x1f, | |
| DATA_ONLY, 0x1a, | |
| DATA_ONLY, 0x2a, | |
| DATA_ONLY, 0x24, | |
| DATA_ONLY, 0x1f, | |
| DATA_ONLY, 0x1b, | |
| DATA_ONLY, 0x1a, | |
| DATA_ONLY, 0x17, | |
| DATA_ONLY, 0x2b, | |
| DATA_ONLY, 0x26, | |
| DATA_ONLY, 0x22, | |
| DATA_ONLY, 0x20, | |
| DATA_ONLY, 0x3a, | |
| DATA_ONLY, 0x34, | |
| DATA_ONLY, 0x30, | |
| DATA_ONLY, 0x2c, | |
| DATA_ONLY, 0x29, | |
| DATA_ONLY, 0x26, | |
| DATA_ONLY, 0x25, | |
| DATA_ONLY, 0x23, | |
| DATA_ONLY, 0x21, | |
| DATA_ONLY, 0x20, | |
| DATA_ONLY, 0x1e, | |
| DATA_ONLY, 0x1e, | |
| 0xba, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x11, | |
| DATA_ONLY, 0x22, | |
| DATA_ONLY, 0x33, | |
| DATA_ONLY, 0x44, | |
| DATA_ONLY, 0x44, | |
| DATA_ONLY, 0x44, | |
| DATA_ONLY, 0x55, | |
| DATA_ONLY, 0x55, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| DATA_ONLY, 0x66, | |
| 0xc1, 0x4d, | |
| DATA_ONLY, 0x96, | |
| DATA_ONLY, 0x1d, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x01, | |
| DATA_ONLY, 0xdf, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x03, | |
| DATA_ONLY, 0x1f, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x00, | |
| DATA_ONLY, 0x03, | |
| DATA_ONLY, 0x06, | |
| DATA_ONLY, 0x09, | |
| DATA_ONLY, 0x0d, | |
| DATA_ONLY, 0x0f, | |
| DATA_ONLY, 0x12, | |
| DATA_ONLY, 0x15, | |
| DATA_ONLY, 0x18, | |
| 0xb2, 0x10, | |
| DATA_ONLY, 0x10, | |
| DATA_ONLY, 0x0b, | |
| DATA_ONLY, 0x05, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_acl_on[] = { | |
| /* ACL on */ | |
| 0xc0, 0x01, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_acl_off[] = { | |
| /* ACL off */ | |
| 0xc0, 0x00, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_elvss_on[] = { | |
| /* ELVSS on */ | |
| 0xb1, 0x0b, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_elvss_off[] = { | |
| /* ELVSS off */ | |
| 0xb1, 0x0a, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_stand_by_off[] = { | |
| 0x11, COMMAND_ONLY, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_stand_by_on[] = { | |
| 0x10, COMMAND_ONLY, | |
| ENDDEF, 0x0000 | |
| }; | |
| static const unsigned short seq_display_on[] = { | |
| 0x29, COMMAND_ONLY, | |
| ENDDEF, 0x0000 | |
| }; | |
| static int s6e63m0_spi_write_byte(struct s6e63m0 *lcd, int addr, int data) | |
| { | |
| u16 buf[1]; | |
| struct spi_message msg; | |
| struct spi_transfer xfer = { | |
| .len = 2, | |
| .tx_buf = buf, | |
| }; | |
| buf[0] = (addr << 8) | data; | |
| spi_message_init(&msg); | |
| spi_message_add_tail(&xfer, &msg); | |
| return spi_sync(lcd->spi, &msg); | |
| } | |
| static int s6e63m0_spi_write(struct s6e63m0 *lcd, unsigned char address, | |
| unsigned char command) | |
| { | |
| int ret = 0; | |
| if (address != DATA_ONLY) | |
| ret = s6e63m0_spi_write_byte(lcd, 0x0, address); | |
| if (command != COMMAND_ONLY) | |
| ret = s6e63m0_spi_write_byte(lcd, 0x1, command); | |
| return ret; | |
| } | |
| static int s6e63m0_panel_send_sequence(struct s6e63m0 *lcd, | |
| const unsigned short *wbuf) | |
| { | |
| int ret = 0, i = 0; | |
| while ((wbuf[i] & DEFMASK) != ENDDEF) { | |
| if ((wbuf[i] & DEFMASK) != SLEEPMSEC) { | |
| ret = s6e63m0_spi_write(lcd, wbuf[i], wbuf[i+1]); | |
| if (ret) | |
| break; | |
| } else { | |
| msleep(wbuf[i+1]); | |
| } | |
| i += 2; | |
| } | |
| return ret; | |
| } | |
| static int _s6e63m0_gamma_ctl(struct s6e63m0 *lcd, const unsigned int *gamma) | |
| { | |
| unsigned int i = 0; | |
| int ret = 0; | |
| /* disable gamma table updating. */ | |
| ret = s6e63m0_spi_write(lcd, 0xfa, 0x00); | |
| if (ret) { | |
| dev_err(lcd->dev, "failed to disable gamma table updating.\n"); | |
| goto gamma_err; | |
| } | |
| for (i = 0 ; i < GAMMA_TABLE_COUNT; i++) { | |
| ret = s6e63m0_spi_write(lcd, DATA_ONLY, gamma[i]); | |
| if (ret) { | |
| dev_err(lcd->dev, "failed to set gamma table.\n"); | |
| goto gamma_err; | |
| } | |
| } | |
| /* update gamma table. */ | |
| ret = s6e63m0_spi_write(lcd, 0xfa, 0x01); | |
| if (ret) | |
| dev_err(lcd->dev, "failed to update gamma table.\n"); | |
| gamma_err: | |
| return ret; | |
| } | |
| static int s6e63m0_gamma_ctl(struct s6e63m0 *lcd, int gamma) | |
| { | |
| int ret = 0; | |
| ret = _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]); | |
| return ret; | |
| } | |
| static int s6e63m0_ldi_init(struct s6e63m0 *lcd) | |
| { | |
| int ret, i; | |
| const unsigned short *init_seq[] = { | |
| seq_panel_condition_set, | |
| seq_display_condition_set, | |
| seq_gamma_setting, | |
| seq_etc_condition_set, | |
| seq_acl_on, | |
| seq_elvss_on, | |
| }; | |
| for (i = 0; i < ARRAY_SIZE(init_seq); i++) { | |
| ret = s6e63m0_panel_send_sequence(lcd, init_seq[i]); | |
| if (ret) | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int s6e63m0_ldi_enable(struct s6e63m0 *lcd) | |
| { | |
| int ret = 0, i; | |
| const unsigned short *enable_seq[] = { | |
| seq_stand_by_off, | |
| seq_display_on, | |
| }; | |
| for (i = 0; i < ARRAY_SIZE(enable_seq); i++) { | |
| ret = s6e63m0_panel_send_sequence(lcd, enable_seq[i]); | |
| if (ret) | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int s6e63m0_ldi_disable(struct s6e63m0 *lcd) | |
| { | |
| int ret; | |
| ret = s6e63m0_panel_send_sequence(lcd, seq_stand_by_on); | |
| return ret; | |
| } | |
| static int s6e63m0_power_is_on(int power) | |
| { | |
| return power <= FB_BLANK_NORMAL; | |
| } | |
| static int s6e63m0_power_on(struct s6e63m0 *lcd) | |
| { | |
| int ret = 0; | |
| struct lcd_platform_data *pd; | |
| struct backlight_device *bd; | |
| pd = lcd->lcd_pd; | |
| bd = lcd->bd; | |
| if (!pd->power_on) { | |
| dev_err(lcd->dev, "power_on is NULL.\n"); | |
| return -EINVAL; | |
| } | |
| pd->power_on(lcd->ld, 1); | |
| msleep(pd->power_on_delay); | |
| if (!pd->reset) { | |
| dev_err(lcd->dev, "reset is NULL.\n"); | |
| return -EINVAL; | |
| } | |
| pd->reset(lcd->ld); | |
| msleep(pd->reset_delay); | |
| ret = s6e63m0_ldi_init(lcd); | |
| if (ret) { | |
| dev_err(lcd->dev, "failed to initialize ldi.\n"); | |
| return ret; | |
| } | |
| ret = s6e63m0_ldi_enable(lcd); | |
| if (ret) { | |
| dev_err(lcd->dev, "failed to enable ldi.\n"); | |
| return ret; | |
| } | |
| /* set brightness to current value after power on or resume. */ | |
| ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness); | |
| if (ret) { | |
| dev_err(lcd->dev, "lcd gamma setting failed.\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int s6e63m0_power_off(struct s6e63m0 *lcd) | |
| { | |
| int ret; | |
| struct lcd_platform_data *pd; | |
| pd = lcd->lcd_pd; | |
| ret = s6e63m0_ldi_disable(lcd); | |
| if (ret) { | |
| dev_err(lcd->dev, "lcd setting failed.\n"); | |
| return -EIO; | |
| } | |
| msleep(pd->power_off_delay); | |
| pd->power_on(lcd->ld, 0); | |
| return 0; | |
| } | |
| static int s6e63m0_power(struct s6e63m0 *lcd, int power) | |
| { | |
| int ret = 0; | |
| if (s6e63m0_power_is_on(power) && !s6e63m0_power_is_on(lcd->power)) | |
| ret = s6e63m0_power_on(lcd); | |
| else if (!s6e63m0_power_is_on(power) && s6e63m0_power_is_on(lcd->power)) | |
| ret = s6e63m0_power_off(lcd); | |
| if (!ret) | |
| lcd->power = power; | |
| return ret; | |
| } | |
| static int s6e63m0_set_power(struct lcd_device *ld, int power) | |
| { | |
| struct s6e63m0 *lcd = lcd_get_data(ld); | |
| if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && | |
| power != FB_BLANK_NORMAL) { | |
| dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); | |
| return -EINVAL; | |
| } | |
| return s6e63m0_power(lcd, power); | |
| } | |
| static int s6e63m0_get_power(struct lcd_device *ld) | |
| { | |
| struct s6e63m0 *lcd = lcd_get_data(ld); | |
| return lcd->power; | |
| } | |
| static int s6e63m0_set_brightness(struct backlight_device *bd) | |
| { | |
| int ret = 0, brightness = bd->props.brightness; | |
| struct s6e63m0 *lcd = bl_get_data(bd); | |
| if (brightness < MIN_BRIGHTNESS || | |
| brightness > bd->props.max_brightness) { | |
| dev_err(&bd->dev, "lcd brightness should be %d to %d.\n", | |
| MIN_BRIGHTNESS, MAX_BRIGHTNESS); | |
| return -EINVAL; | |
| } | |
| ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness); | |
| if (ret) { | |
| dev_err(&bd->dev, "lcd brightness setting failed.\n"); | |
| return -EIO; | |
| } | |
| return ret; | |
| } | |
| static struct lcd_ops s6e63m0_lcd_ops = { | |
| .set_power = s6e63m0_set_power, | |
| .get_power = s6e63m0_get_power, | |
| }; | |
| static const struct backlight_ops s6e63m0_backlight_ops = { | |
| .update_status = s6e63m0_set_brightness, | |
| }; | |
| static ssize_t s6e63m0_sysfs_show_gamma_mode(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct s6e63m0 *lcd = dev_get_drvdata(dev); | |
| char temp[10]; | |
| switch (lcd->gamma_mode) { | |
| case 0: | |
| sprintf(temp, "2.2 mode\n"); | |
| strcat(buf, temp); | |
| break; | |
| case 1: | |
| sprintf(temp, "1.9 mode\n"); | |
| strcat(buf, temp); | |
| break; | |
| case 2: | |
| sprintf(temp, "1.7 mode\n"); | |
| strcat(buf, temp); | |
| break; | |
| default: | |
| dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7)n"); | |
| break; | |
| } | |
| return strlen(buf); | |
| } | |
| static ssize_t s6e63m0_sysfs_store_gamma_mode(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len) | |
| { | |
| struct s6e63m0 *lcd = dev_get_drvdata(dev); | |
| struct backlight_device *bd = NULL; | |
| int brightness, rc; | |
| rc = kstrtouint(buf, 0, &lcd->gamma_mode); | |
| if (rc < 0) | |
| return rc; | |
| bd = lcd->bd; | |
| brightness = bd->props.brightness; | |
| switch (lcd->gamma_mode) { | |
| case 0: | |
| _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]); | |
| break; | |
| case 1: | |
| _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_19_table[brightness]); | |
| break; | |
| case 2: | |
| _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_17_table[brightness]); | |
| break; | |
| default: | |
| dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7\n"); | |
| _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]); | |
| break; | |
| } | |
| return len; | |
| } | |
| static DEVICE_ATTR(gamma_mode, 0644, | |
| s6e63m0_sysfs_show_gamma_mode, s6e63m0_sysfs_store_gamma_mode); | |
| static ssize_t s6e63m0_sysfs_show_gamma_table(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct s6e63m0 *lcd = dev_get_drvdata(dev); | |
| char temp[3]; | |
| sprintf(temp, "%u\n", lcd->gamma_table_count); | |
| strcpy(buf, temp); | |
| return strlen(buf); | |
| } | |
| static DEVICE_ATTR(gamma_table, 0444, | |
| s6e63m0_sysfs_show_gamma_table, NULL); | |
| static int s6e63m0_probe(struct spi_device *spi) | |
| { | |
| int ret = 0; | |
| struct s6e63m0 *lcd = NULL; | |
| struct lcd_device *ld = NULL; | |
| struct backlight_device *bd = NULL; | |
| struct backlight_properties props; | |
| lcd = devm_kzalloc(&spi->dev, sizeof(struct s6e63m0), GFP_KERNEL); | |
| if (!lcd) | |
| return -ENOMEM; | |
| /* s6e63m0 lcd panel uses 3-wire 9bits SPI Mode. */ | |
| spi->bits_per_word = 9; | |
| ret = spi_setup(spi); | |
| if (ret < 0) { | |
| dev_err(&spi->dev, "spi setup failed.\n"); | |
| return ret; | |
| } | |
| lcd->spi = spi; | |
| lcd->dev = &spi->dev; | |
| lcd->lcd_pd = dev_get_platdata(&spi->dev); | |
| if (!lcd->lcd_pd) { | |
| dev_err(&spi->dev, "platform data is NULL.\n"); | |
| return -EINVAL; | |
| } | |
| ld = devm_lcd_device_register(&spi->dev, "s6e63m0", &spi->dev, lcd, | |
| &s6e63m0_lcd_ops); | |
| if (IS_ERR(ld)) | |
| return PTR_ERR(ld); | |
| lcd->ld = ld; | |
| memset(&props, 0, sizeof(struct backlight_properties)); | |
| props.type = BACKLIGHT_RAW; | |
| props.max_brightness = MAX_BRIGHTNESS; | |
| bd = devm_backlight_device_register(&spi->dev, "s6e63m0bl-bl", | |
| &spi->dev, lcd, &s6e63m0_backlight_ops, | |
| &props); | |
| if (IS_ERR(bd)) | |
| return PTR_ERR(bd); | |
| bd->props.brightness = MAX_BRIGHTNESS; | |
| lcd->bd = bd; | |
| /* | |
| * it gets gamma table count available so it gets user | |
| * know that. | |
| */ | |
| lcd->gamma_table_count = | |
| sizeof(gamma_table) / (MAX_GAMMA_LEVEL * sizeof(int *)); | |
| ret = device_create_file(&(spi->dev), &dev_attr_gamma_mode); | |
| if (ret < 0) | |
| dev_err(&(spi->dev), "failed to add sysfs entries\n"); | |
| ret = device_create_file(&(spi->dev), &dev_attr_gamma_table); | |
| if (ret < 0) | |
| dev_err(&(spi->dev), "failed to add sysfs entries\n"); | |
| /* | |
| * if lcd panel was on from bootloader like u-boot then | |
| * do not lcd on. | |
| */ | |
| if (!lcd->lcd_pd->lcd_enabled) { | |
| /* | |
| * if lcd panel was off from bootloader then | |
| * current lcd status is powerdown and then | |
| * it enables lcd panel. | |
| */ | |
| lcd->power = FB_BLANK_POWERDOWN; | |
| s6e63m0_power(lcd, FB_BLANK_UNBLANK); | |
| } else { | |
| lcd->power = FB_BLANK_UNBLANK; | |
| } | |
| spi_set_drvdata(spi, lcd); | |
| dev_info(&spi->dev, "s6e63m0 panel driver has been probed.\n"); | |
| return 0; | |
| } | |
| static int s6e63m0_remove(struct spi_device *spi) | |
| { | |
| struct s6e63m0 *lcd = spi_get_drvdata(spi); | |
| s6e63m0_power(lcd, FB_BLANK_POWERDOWN); | |
| device_remove_file(&spi->dev, &dev_attr_gamma_table); | |
| device_remove_file(&spi->dev, &dev_attr_gamma_mode); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int s6e63m0_suspend(struct device *dev) | |
| { | |
| struct s6e63m0 *lcd = dev_get_drvdata(dev); | |
| dev_dbg(dev, "lcd->power = %d\n", lcd->power); | |
| /* | |
| * when lcd panel is suspend, lcd panel becomes off | |
| * regardless of status. | |
| */ | |
| return s6e63m0_power(lcd, FB_BLANK_POWERDOWN); | |
| } | |
| static int s6e63m0_resume(struct device *dev) | |
| { | |
| struct s6e63m0 *lcd = dev_get_drvdata(dev); | |
| lcd->power = FB_BLANK_POWERDOWN; | |
| return s6e63m0_power(lcd, FB_BLANK_UNBLANK); | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(s6e63m0_pm_ops, s6e63m0_suspend, s6e63m0_resume); | |
| /* Power down all displays on reboot, poweroff or halt. */ | |
| static void s6e63m0_shutdown(struct spi_device *spi) | |
| { | |
| struct s6e63m0 *lcd = spi_get_drvdata(spi); | |
| s6e63m0_power(lcd, FB_BLANK_POWERDOWN); | |
| } | |
| static struct spi_driver s6e63m0_driver = { | |
| .driver = { | |
| .name = "s6e63m0", | |
| .pm = &s6e63m0_pm_ops, | |
| }, | |
| .probe = s6e63m0_probe, | |
| .remove = s6e63m0_remove, | |
| .shutdown = s6e63m0_shutdown, | |
| }; | |
| module_spi_driver(s6e63m0_driver); | |
| MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>"); | |
| MODULE_DESCRIPTION("S6E63M0 LCD Driver"); | |
| MODULE_LICENSE("GPL"); | |