| /* | |
| * linux/drivers/video/vgacon.c -- Low level VGA based console driver | |
| * | |
| * Created 28 Sep 1997 by Geert Uytterhoeven | |
| * | |
| * Rewritten by Martin Mares <mj@ucw.cz>, July 1998 | |
| * | |
| * This file is based on the old console.c, vga.c and vesa_blank.c drivers. | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| * 1995 Jay Estabrook | |
| * | |
| * User definable mapping table and font loading by Eugene G. Crosser, | |
| * <crosser@average.org> | |
| * | |
| * Improved loadable font/UTF-8 support by H. Peter Anvin | |
| * Feb-Sep 1995 <peter.anvin@linux.org> | |
| * | |
| * Colour palette handling, by Simon Tatham | |
| * 17-Jun-95 <sgt20@cam.ac.uk> | |
| * | |
| * if 512 char mode is already enabled don't re-enable it, | |
| * because it causes screen to flicker, by Mitja Horvat | |
| * 5-May-96 <mitja.horvat@guest.arnes.si> | |
| * | |
| * Use 2 outw instead of 4 outb_p to reduce erroneous text | |
| * flashing on RHS of screen during heavy console scrolling . | |
| * Oct 1996, Paul Gortmaker. | |
| * | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file COPYING in the main directory of this archive for | |
| * more details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/console.h> | |
| #include <linux/string.h> | |
| #include <linux/kd.h> | |
| #include <linux/slab.h> | |
| #include <linux/vt_kern.h> | |
| #include <linux/sched.h> | |
| #include <linux/selection.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/ioport.h> | |
| #include <linux/init.h> | |
| #include <linux/screen_info.h> | |
| #include <video/vga.h> | |
| #include <asm/io.h> | |
| static DEFINE_RAW_SPINLOCK(vga_lock); | |
| static int cursor_size_lastfrom; | |
| static int cursor_size_lastto; | |
| static u32 vgacon_xres; | |
| static u32 vgacon_yres; | |
| static struct vgastate vgastate; | |
| #define BLANK 0x0020 | |
| #define VGA_FONTWIDTH 8 /* VGA does not support fontwidths != 8 */ | |
| /* | |
| * Interface used by the world | |
| */ | |
| static const char *vgacon_startup(void); | |
| static void vgacon_init(struct vc_data *c, int init); | |
| static void vgacon_deinit(struct vc_data *c); | |
| static void vgacon_cursor(struct vc_data *c, int mode); | |
| static int vgacon_switch(struct vc_data *c); | |
| static int vgacon_blank(struct vc_data *c, int blank, int mode_switch); | |
| static void vgacon_scrolldelta(struct vc_data *c, int lines); | |
| static int vgacon_set_origin(struct vc_data *c); | |
| static void vgacon_save_screen(struct vc_data *c); | |
| static void vgacon_invert_region(struct vc_data *c, u16 * p, int count); | |
| static struct uni_pagedir *vgacon_uni_pagedir; | |
| static int vgacon_refcount; | |
| /* Description of the hardware situation */ | |
| static bool vga_init_done; | |
| static unsigned long vga_vram_base __read_mostly; /* Base of video memory */ | |
| static unsigned long vga_vram_end __read_mostly; /* End of video memory */ | |
| static unsigned int vga_vram_size __read_mostly; /* Size of video memory */ | |
| static u16 vga_video_port_reg __read_mostly; /* Video register select port */ | |
| static u16 vga_video_port_val __read_mostly; /* Video register value port */ | |
| static unsigned int vga_video_num_columns; /* Number of text columns */ | |
| static unsigned int vga_video_num_lines; /* Number of text lines */ | |
| static bool vga_can_do_color; /* Do we support colors? */ | |
| static unsigned int vga_default_font_height __read_mostly; /* Height of default screen font */ | |
| static unsigned char vga_video_type __read_mostly; /* Card type */ | |
| static bool vga_font_is_default = true; | |
| static int vga_vesa_blanked; | |
| static bool vga_palette_blanked; | |
| static bool vga_is_gfx; | |
| static bool vga_512_chars; | |
| static int vga_video_font_height; | |
| static int vga_scan_lines __read_mostly; | |
| static unsigned int vga_rolled_over; | |
| static bool vgacon_text_mode_force; | |
| static bool vga_hardscroll_enabled; | |
| static bool vga_hardscroll_user_enable = true; | |
| bool vgacon_text_force(void) | |
| { | |
| return vgacon_text_mode_force; | |
| } | |
| EXPORT_SYMBOL(vgacon_text_force); | |
| static int __init text_mode(char *str) | |
| { | |
| vgacon_text_mode_force = true; | |
| return 1; | |
| } | |
| /* force text mode - used by kernel modesetting */ | |
| __setup("nomodeset", text_mode); | |
| static int __init no_scroll(char *str) | |
| { | |
| /* | |
| * Disabling scrollback is required for the Braillex ib80-piezo | |
| * Braille reader made by F.H. Papenmeier (Germany). | |
| * Use the "no-scroll" bootflag. | |
| */ | |
| vga_hardscroll_user_enable = vga_hardscroll_enabled = false; | |
| return 1; | |
| } | |
| __setup("no-scroll", no_scroll); | |
| /* | |
| * By replacing the four outb_p with two back to back outw, we can reduce | |
| * the window of opportunity to see text mislocated to the RHS of the | |
| * console during heavy scrolling activity. However there is the remote | |
| * possibility that some pre-dinosaur hardware won't like the back to back | |
| * I/O. Since the Xservers get away with it, we should be able to as well. | |
| */ | |
| static inline void write_vga(unsigned char reg, unsigned int val) | |
| { | |
| unsigned int v1, v2; | |
| unsigned long flags; | |
| /* | |
| * ddprintk might set the console position from interrupt | |
| * handlers, thus the write has to be IRQ-atomic. | |
| */ | |
| raw_spin_lock_irqsave(&vga_lock, flags); | |
| v1 = reg + (val & 0xff00); | |
| v2 = reg + 1 + ((val << 8) & 0xff00); | |
| outw(v1, vga_video_port_reg); | |
| outw(v2, vga_video_port_reg); | |
| raw_spin_unlock_irqrestore(&vga_lock, flags); | |
| } | |
| static inline void vga_set_mem_top(struct vc_data *c) | |
| { | |
| write_vga(12, (c->vc_visible_origin - vga_vram_base) / 2); | |
| } | |
| #ifdef CONFIG_VGACON_SOFT_SCROLLBACK | |
| /* software scrollback */ | |
| struct vgacon_scrollback_info { | |
| void *data; | |
| int tail; | |
| int size; | |
| int rows; | |
| int cnt; | |
| int cur; | |
| int save; | |
| int restore; | |
| }; | |
| static struct vgacon_scrollback_info *vgacon_scrollback_cur; | |
| static struct vgacon_scrollback_info vgacon_scrollbacks[MAX_NR_CONSOLES]; | |
| static bool scrollback_persistent = \ | |
| IS_ENABLED(CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT); | |
| module_param_named(scrollback_persistent, scrollback_persistent, bool, 0000); | |
| MODULE_PARM_DESC(scrollback_persistent, "Enable persistent scrollback for all vga consoles"); | |
| static void vgacon_scrollback_reset(int vc_num, size_t reset_size) | |
| { | |
| struct vgacon_scrollback_info *scrollback = &vgacon_scrollbacks[vc_num]; | |
| if (scrollback->data && reset_size > 0) | |
| memset(scrollback->data, 0, reset_size); | |
| scrollback->cnt = 0; | |
| scrollback->tail = 0; | |
| scrollback->cur = 0; | |
| } | |
| static void vgacon_scrollback_init(int vc_num) | |
| { | |
| int pitch = vga_video_num_columns * 2; | |
| size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024; | |
| int rows = size / pitch; | |
| void *data; | |
| data = kmalloc_array(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, 1024, | |
| GFP_NOWAIT); | |
| vgacon_scrollbacks[vc_num].data = data; | |
| vgacon_scrollback_cur = &vgacon_scrollbacks[vc_num]; | |
| vgacon_scrollback_cur->rows = rows - 1; | |
| vgacon_scrollback_cur->size = rows * pitch; | |
| vgacon_scrollback_reset(vc_num, size); | |
| } | |
| static void vgacon_scrollback_switch(int vc_num) | |
| { | |
| if (!scrollback_persistent) | |
| vc_num = 0; | |
| if (!vgacon_scrollbacks[vc_num].data) { | |
| vgacon_scrollback_init(vc_num); | |
| } else { | |
| if (scrollback_persistent) { | |
| vgacon_scrollback_cur = &vgacon_scrollbacks[vc_num]; | |
| } else { | |
| size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024; | |
| vgacon_scrollback_reset(vc_num, size); | |
| } | |
| } | |
| } | |
| static void vgacon_scrollback_startup(void) | |
| { | |
| vgacon_scrollback_cur = &vgacon_scrollbacks[0]; | |
| vgacon_scrollback_init(0); | |
| } | |
| static void vgacon_scrollback_update(struct vc_data *c, int t, int count) | |
| { | |
| void *p; | |
| if (!vgacon_scrollback_cur->data || !vgacon_scrollback_cur->size || | |
| c->vc_num != fg_console) | |
| return; | |
| p = (void *) (c->vc_origin + t * c->vc_size_row); | |
| while (count--) { | |
| scr_memcpyw(vgacon_scrollback_cur->data + | |
| vgacon_scrollback_cur->tail, | |
| p, c->vc_size_row); | |
| vgacon_scrollback_cur->cnt++; | |
| p += c->vc_size_row; | |
| vgacon_scrollback_cur->tail += c->vc_size_row; | |
| if (vgacon_scrollback_cur->tail >= vgacon_scrollback_cur->size) | |
| vgacon_scrollback_cur->tail = 0; | |
| if (vgacon_scrollback_cur->cnt > vgacon_scrollback_cur->rows) | |
| vgacon_scrollback_cur->cnt = vgacon_scrollback_cur->rows; | |
| vgacon_scrollback_cur->cur = vgacon_scrollback_cur->cnt; | |
| } | |
| } | |
| static void vgacon_restore_screen(struct vc_data *c) | |
| { | |
| vgacon_scrollback_cur->save = 0; | |
| if (!vga_is_gfx && !vgacon_scrollback_cur->restore) { | |
| scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf, | |
| c->vc_screenbuf_size > vga_vram_size ? | |
| vga_vram_size : c->vc_screenbuf_size); | |
| vgacon_scrollback_cur->restore = 1; | |
| vgacon_scrollback_cur->cur = vgacon_scrollback_cur->cnt; | |
| } | |
| } | |
| static void vgacon_scrolldelta(struct vc_data *c, int lines) | |
| { | |
| int start, end, count, soff; | |
| if (!lines) { | |
| c->vc_visible_origin = c->vc_origin; | |
| vga_set_mem_top(c); | |
| return; | |
| } | |
| if (!vgacon_scrollback_cur->data) | |
| return; | |
| if (!vgacon_scrollback_cur->save) { | |
| vgacon_cursor(c, CM_ERASE); | |
| vgacon_save_screen(c); | |
| vgacon_scrollback_cur->save = 1; | |
| } | |
| vgacon_scrollback_cur->restore = 0; | |
| start = vgacon_scrollback_cur->cur + lines; | |
| end = start + abs(lines); | |
| if (start < 0) | |
| start = 0; | |
| if (start > vgacon_scrollback_cur->cnt) | |
| start = vgacon_scrollback_cur->cnt; | |
| if (end < 0) | |
| end = 0; | |
| if (end > vgacon_scrollback_cur->cnt) | |
| end = vgacon_scrollback_cur->cnt; | |
| vgacon_scrollback_cur->cur = start; | |
| count = end - start; | |
| soff = vgacon_scrollback_cur->tail - | |
| ((vgacon_scrollback_cur->cnt - end) * c->vc_size_row); | |
| soff -= count * c->vc_size_row; | |
| if (soff < 0) | |
| soff += vgacon_scrollback_cur->size; | |
| count = vgacon_scrollback_cur->cnt - start; | |
| if (count > c->vc_rows) | |
| count = c->vc_rows; | |
| if (count) { | |
| int copysize; | |
| int diff = c->vc_rows - count; | |
| void *d = (void *) c->vc_origin; | |
| void *s = (void *) c->vc_screenbuf; | |
| count *= c->vc_size_row; | |
| /* how much memory to end of buffer left? */ | |
| copysize = min(count, vgacon_scrollback_cur->size - soff); | |
| scr_memcpyw(d, vgacon_scrollback_cur->data + soff, copysize); | |
| d += copysize; | |
| count -= copysize; | |
| if (count) { | |
| scr_memcpyw(d, vgacon_scrollback_cur->data, count); | |
| d += count; | |
| } | |
| if (diff) | |
| scr_memcpyw(d, s, diff * c->vc_size_row); | |
| } else | |
| vgacon_cursor(c, CM_MOVE); | |
| } | |
| static void vgacon_flush_scrollback(struct vc_data *c) | |
| { | |
| size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024; | |
| vgacon_scrollback_reset(c->vc_num, size); | |
| } | |
| #else | |
| #define vgacon_scrollback_startup(...) do { } while (0) | |
| #define vgacon_scrollback_init(...) do { } while (0) | |
| #define vgacon_scrollback_update(...) do { } while (0) | |
| #define vgacon_scrollback_switch(...) do { } while (0) | |
| static void vgacon_restore_screen(struct vc_data *c) | |
| { | |
| if (c->vc_origin != c->vc_visible_origin) | |
| vgacon_scrolldelta(c, 0); | |
| } | |
| static void vgacon_scrolldelta(struct vc_data *c, int lines) | |
| { | |
| vc_scrolldelta_helper(c, lines, vga_rolled_over, (void *)vga_vram_base, | |
| vga_vram_size); | |
| vga_set_mem_top(c); | |
| } | |
| static void vgacon_flush_scrollback(struct vc_data *c) | |
| { | |
| } | |
| #endif /* CONFIG_VGACON_SOFT_SCROLLBACK */ | |
| static const char *vgacon_startup(void) | |
| { | |
| const char *display_desc = NULL; | |
| u16 saved1, saved2; | |
| volatile u16 *p; | |
| if (screen_info.orig_video_isVGA == VIDEO_TYPE_VLFB || | |
| screen_info.orig_video_isVGA == VIDEO_TYPE_EFI) { | |
| no_vga: | |
| #ifdef CONFIG_DUMMY_CONSOLE | |
| conswitchp = &dummy_con; | |
| return conswitchp->con_startup(); | |
| #else | |
| return NULL; | |
| #endif | |
| } | |
| /* boot_params.screen_info reasonably initialized? */ | |
| if ((screen_info.orig_video_lines == 0) || | |
| (screen_info.orig_video_cols == 0)) | |
| goto no_vga; | |
| /* VGA16 modes are not handled by VGACON */ | |
| if ((screen_info.orig_video_mode == 0x0D) || /* 320x200/4 */ | |
| (screen_info.orig_video_mode == 0x0E) || /* 640x200/4 */ | |
| (screen_info.orig_video_mode == 0x10) || /* 640x350/4 */ | |
| (screen_info.orig_video_mode == 0x12) || /* 640x480/4 */ | |
| (screen_info.orig_video_mode == 0x6A)) /* 800x600/4 (VESA) */ | |
| goto no_vga; | |
| vga_video_num_lines = screen_info.orig_video_lines; | |
| vga_video_num_columns = screen_info.orig_video_cols; | |
| vgastate.vgabase = NULL; | |
| if (screen_info.orig_video_mode == 7) { | |
| /* Monochrome display */ | |
| vga_vram_base = 0xb0000; | |
| vga_video_port_reg = VGA_CRT_IM; | |
| vga_video_port_val = VGA_CRT_DM; | |
| if ((screen_info.orig_video_ega_bx & 0xff) != 0x10) { | |
| static struct resource ega_console_resource = | |
| { .name = "ega", .start = 0x3B0, .end = 0x3BF }; | |
| vga_video_type = VIDEO_TYPE_EGAM; | |
| vga_vram_size = 0x8000; | |
| display_desc = "EGA+"; | |
| request_resource(&ioport_resource, | |
| &ega_console_resource); | |
| } else { | |
| static struct resource mda1_console_resource = | |
| { .name = "mda", .start = 0x3B0, .end = 0x3BB }; | |
| static struct resource mda2_console_resource = | |
| { .name = "mda", .start = 0x3BF, .end = 0x3BF }; | |
| vga_video_type = VIDEO_TYPE_MDA; | |
| vga_vram_size = 0x2000; | |
| display_desc = "*MDA"; | |
| request_resource(&ioport_resource, | |
| &mda1_console_resource); | |
| request_resource(&ioport_resource, | |
| &mda2_console_resource); | |
| vga_video_font_height = 14; | |
| } | |
| } else { | |
| /* If not, it is color. */ | |
| vga_can_do_color = true; | |
| vga_vram_base = 0xb8000; | |
| vga_video_port_reg = VGA_CRT_IC; | |
| vga_video_port_val = VGA_CRT_DC; | |
| if ((screen_info.orig_video_ega_bx & 0xff) != 0x10) { | |
| int i; | |
| vga_vram_size = 0x8000; | |
| if (!screen_info.orig_video_isVGA) { | |
| static struct resource ega_console_resource | |
| = { .name = "ega", .start = 0x3C0, .end = 0x3DF }; | |
| vga_video_type = VIDEO_TYPE_EGAC; | |
| display_desc = "EGA"; | |
| request_resource(&ioport_resource, | |
| &ega_console_resource); | |
| } else { | |
| static struct resource vga_console_resource | |
| = { .name = "vga+", .start = 0x3C0, .end = 0x3DF }; | |
| vga_video_type = VIDEO_TYPE_VGAC; | |
| display_desc = "VGA+"; | |
| request_resource(&ioport_resource, | |
| &vga_console_resource); | |
| /* | |
| * Normalise the palette registers, to point | |
| * the 16 screen colours to the first 16 | |
| * DAC entries. | |
| */ | |
| for (i = 0; i < 16; i++) { | |
| inb_p(VGA_IS1_RC); | |
| outb_p(i, VGA_ATT_W); | |
| outb_p(i, VGA_ATT_W); | |
| } | |
| outb_p(0x20, VGA_ATT_W); | |
| /* | |
| * Now set the DAC registers back to their | |
| * default values | |
| */ | |
| for (i = 0; i < 16; i++) { | |
| outb_p(color_table[i], VGA_PEL_IW); | |
| outb_p(default_red[i], VGA_PEL_D); | |
| outb_p(default_grn[i], VGA_PEL_D); | |
| outb_p(default_blu[i], VGA_PEL_D); | |
| } | |
| } | |
| } else { | |
| static struct resource cga_console_resource = | |
| { .name = "cga", .start = 0x3D4, .end = 0x3D5 }; | |
| vga_video_type = VIDEO_TYPE_CGA; | |
| vga_vram_size = 0x2000; | |
| display_desc = "*CGA"; | |
| request_resource(&ioport_resource, | |
| &cga_console_resource); | |
| vga_video_font_height = 8; | |
| } | |
| } | |
| vga_vram_base = VGA_MAP_MEM(vga_vram_base, vga_vram_size); | |
| vga_vram_end = vga_vram_base + vga_vram_size; | |
| /* | |
| * Find out if there is a graphics card present. | |
| * Are there smarter methods around? | |
| */ | |
| p = (volatile u16 *) vga_vram_base; | |
| saved1 = scr_readw(p); | |
| saved2 = scr_readw(p + 1); | |
| scr_writew(0xAA55, p); | |
| scr_writew(0x55AA, p + 1); | |
| if (scr_readw(p) != 0xAA55 || scr_readw(p + 1) != 0x55AA) { | |
| scr_writew(saved1, p); | |
| scr_writew(saved2, p + 1); | |
| goto no_vga; | |
| } | |
| scr_writew(0x55AA, p); | |
| scr_writew(0xAA55, p + 1); | |
| if (scr_readw(p) != 0x55AA || scr_readw(p + 1) != 0xAA55) { | |
| scr_writew(saved1, p); | |
| scr_writew(saved2, p + 1); | |
| goto no_vga; | |
| } | |
| scr_writew(saved1, p); | |
| scr_writew(saved2, p + 1); | |
| if (vga_video_type == VIDEO_TYPE_EGAC | |
| || vga_video_type == VIDEO_TYPE_VGAC | |
| || vga_video_type == VIDEO_TYPE_EGAM) { | |
| vga_hardscroll_enabled = vga_hardscroll_user_enable; | |
| vga_default_font_height = screen_info.orig_video_points; | |
| vga_video_font_height = screen_info.orig_video_points; | |
| /* This may be suboptimal but is a safe bet - go with it */ | |
| vga_scan_lines = | |
| vga_video_font_height * vga_video_num_lines; | |
| } | |
| vgacon_xres = screen_info.orig_video_cols * VGA_FONTWIDTH; | |
| vgacon_yres = vga_scan_lines; | |
| if (!vga_init_done) { | |
| vgacon_scrollback_startup(); | |
| vga_init_done = true; | |
| } | |
| return display_desc; | |
| } | |
| static void vgacon_init(struct vc_data *c, int init) | |
| { | |
| struct uni_pagedir *p; | |
| /* | |
| * We cannot be loaded as a module, therefore init is always 1, | |
| * but vgacon_init can be called more than once, and init will | |
| * not be 1. | |
| */ | |
| c->vc_can_do_color = vga_can_do_color; | |
| /* set dimensions manually if init != 0 since vc_resize() will fail */ | |
| if (init) { | |
| c->vc_cols = vga_video_num_columns; | |
| c->vc_rows = vga_video_num_lines; | |
| } else | |
| vc_resize(c, vga_video_num_columns, vga_video_num_lines); | |
| c->vc_scan_lines = vga_scan_lines; | |
| c->vc_font.height = vga_video_font_height; | |
| c->vc_complement_mask = 0x7700; | |
| if (vga_512_chars) | |
| c->vc_hi_font_mask = 0x0800; | |
| p = *c->vc_uni_pagedir_loc; | |
| if (c->vc_uni_pagedir_loc != &vgacon_uni_pagedir) { | |
| con_free_unimap(c); | |
| c->vc_uni_pagedir_loc = &vgacon_uni_pagedir; | |
| vgacon_refcount++; | |
| } | |
| if (!vgacon_uni_pagedir && p) | |
| con_set_default_unimap(c); | |
| /* Only set the default if the user didn't deliberately override it */ | |
| if (global_cursor_default == -1) | |
| global_cursor_default = | |
| !(screen_info.flags & VIDEO_FLAGS_NOCURSOR); | |
| } | |
| static void vgacon_deinit(struct vc_data *c) | |
| { | |
| /* When closing the active console, reset video origin */ | |
| if (con_is_visible(c)) { | |
| c->vc_visible_origin = vga_vram_base; | |
| vga_set_mem_top(c); | |
| } | |
| if (!--vgacon_refcount) | |
| con_free_unimap(c); | |
| c->vc_uni_pagedir_loc = &c->vc_uni_pagedir; | |
| con_set_default_unimap(c); | |
| } | |
| static u8 vgacon_build_attr(struct vc_data *c, u8 color, u8 intensity, | |
| u8 blink, u8 underline, u8 reverse, u8 italic) | |
| { | |
| u8 attr = color; | |
| if (vga_can_do_color) { | |
| if (italic) | |
| attr = (attr & 0xF0) | c->vc_itcolor; | |
| else if (underline) | |
| attr = (attr & 0xf0) | c->vc_ulcolor; | |
| else if (intensity == 0) | |
| attr = (attr & 0xf0) | c->vc_halfcolor; | |
| } | |
| if (reverse) | |
| attr = | |
| ((attr) & 0x88) | ((((attr) >> 4) | ((attr) << 4)) & | |
| 0x77); | |
| if (blink) | |
| attr ^= 0x80; | |
| if (intensity == 2) | |
| attr ^= 0x08; | |
| if (!vga_can_do_color) { | |
| if (italic) | |
| attr = (attr & 0xF8) | 0x02; | |
| else if (underline) | |
| attr = (attr & 0xf8) | 0x01; | |
| else if (intensity == 0) | |
| attr = (attr & 0xf0) | 0x08; | |
| } | |
| return attr; | |
| } | |
| static void vgacon_invert_region(struct vc_data *c, u16 * p, int count) | |
| { | |
| const bool col = vga_can_do_color; | |
| while (count--) { | |
| u16 a = scr_readw(p); | |
| if (col) | |
| a = ((a) & 0x88ff) | (((a) & 0x7000) >> 4) | | |
| (((a) & 0x0700) << 4); | |
| else | |
| a ^= ((a & 0x0700) == 0x0100) ? 0x7000 : 0x7700; | |
| scr_writew(a, p++); | |
| } | |
| } | |
| static void vgacon_set_cursor_size(int xpos, int from, int to) | |
| { | |
| unsigned long flags; | |
| int curs, cure; | |
| if ((from == cursor_size_lastfrom) && (to == cursor_size_lastto)) | |
| return; | |
| cursor_size_lastfrom = from; | |
| cursor_size_lastto = to; | |
| raw_spin_lock_irqsave(&vga_lock, flags); | |
| if (vga_video_type >= VIDEO_TYPE_VGAC) { | |
| outb_p(VGA_CRTC_CURSOR_START, vga_video_port_reg); | |
| curs = inb_p(vga_video_port_val); | |
| outb_p(VGA_CRTC_CURSOR_END, vga_video_port_reg); | |
| cure = inb_p(vga_video_port_val); | |
| } else { | |
| curs = 0; | |
| cure = 0; | |
| } | |
| curs = (curs & 0xc0) | from; | |
| cure = (cure & 0xe0) | to; | |
| outb_p(VGA_CRTC_CURSOR_START, vga_video_port_reg); | |
| outb_p(curs, vga_video_port_val); | |
| outb_p(VGA_CRTC_CURSOR_END, vga_video_port_reg); | |
| outb_p(cure, vga_video_port_val); | |
| raw_spin_unlock_irqrestore(&vga_lock, flags); | |
| } | |
| static void vgacon_cursor(struct vc_data *c, int mode) | |
| { | |
| if (c->vc_mode != KD_TEXT) | |
| return; | |
| vgacon_restore_screen(c); | |
| switch (mode) { | |
| case CM_ERASE: | |
| write_vga(14, (c->vc_pos - vga_vram_base) / 2); | |
| if (vga_video_type >= VIDEO_TYPE_VGAC) | |
| vgacon_set_cursor_size(c->vc_x, 31, 30); | |
| else | |
| vgacon_set_cursor_size(c->vc_x, 31, 31); | |
| break; | |
| case CM_MOVE: | |
| case CM_DRAW: | |
| write_vga(14, (c->vc_pos - vga_vram_base) / 2); | |
| switch (c->vc_cursor_type & 0x0f) { | |
| case CUR_UNDERLINE: | |
| vgacon_set_cursor_size(c->vc_x, | |
| c->vc_font.height - | |
| (c->vc_font.height < | |
| 10 ? 2 : 3), | |
| c->vc_font.height - | |
| (c->vc_font.height < | |
| 10 ? 1 : 2)); | |
| break; | |
| case CUR_TWO_THIRDS: | |
| vgacon_set_cursor_size(c->vc_x, | |
| c->vc_font.height / 3, | |
| c->vc_font.height - | |
| (c->vc_font.height < | |
| 10 ? 1 : 2)); | |
| break; | |
| case CUR_LOWER_THIRD: | |
| vgacon_set_cursor_size(c->vc_x, | |
| (c->vc_font.height * 2) / 3, | |
| c->vc_font.height - | |
| (c->vc_font.height < | |
| 10 ? 1 : 2)); | |
| break; | |
| case CUR_LOWER_HALF: | |
| vgacon_set_cursor_size(c->vc_x, | |
| c->vc_font.height / 2, | |
| c->vc_font.height - | |
| (c->vc_font.height < | |
| 10 ? 1 : 2)); | |
| break; | |
| case CUR_NONE: | |
| if (vga_video_type >= VIDEO_TYPE_VGAC) | |
| vgacon_set_cursor_size(c->vc_x, 31, 30); | |
| else | |
| vgacon_set_cursor_size(c->vc_x, 31, 31); | |
| break; | |
| default: | |
| vgacon_set_cursor_size(c->vc_x, 1, | |
| c->vc_font.height); | |
| break; | |
| } | |
| break; | |
| } | |
| } | |
| static int vgacon_doresize(struct vc_data *c, | |
| unsigned int width, unsigned int height) | |
| { | |
| unsigned long flags; | |
| unsigned int scanlines = height * c->vc_font.height; | |
| u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan; | |
| raw_spin_lock_irqsave(&vga_lock, flags); | |
| vgacon_xres = width * VGA_FONTWIDTH; | |
| vgacon_yres = height * c->vc_font.height; | |
| if (vga_video_type >= VIDEO_TYPE_VGAC) { | |
| outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg); | |
| max_scan = inb_p(vga_video_port_val); | |
| if (max_scan & 0x80) | |
| scanlines <<= 1; | |
| outb_p(VGA_CRTC_MODE, vga_video_port_reg); | |
| mode = inb_p(vga_video_port_val); | |
| if (mode & 0x04) | |
| scanlines >>= 1; | |
| scanlines -= 1; | |
| scanlines_lo = scanlines & 0xff; | |
| outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); | |
| r7 = inb_p(vga_video_port_val) & ~0x42; | |
| if (scanlines & 0x100) | |
| r7 |= 0x02; | |
| if (scanlines & 0x200) | |
| r7 |= 0x40; | |
| /* deprotect registers */ | |
| outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); | |
| vsync_end = inb_p(vga_video_port_val); | |
| outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); | |
| outb_p(vsync_end & ~0x80, vga_video_port_val); | |
| } | |
| outb_p(VGA_CRTC_H_DISP, vga_video_port_reg); | |
| outb_p(width - 1, vga_video_port_val); | |
| outb_p(VGA_CRTC_OFFSET, vga_video_port_reg); | |
| outb_p(width >> 1, vga_video_port_val); | |
| if (vga_video_type >= VIDEO_TYPE_VGAC) { | |
| outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg); | |
| outb_p(scanlines_lo, vga_video_port_val); | |
| outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); | |
| outb_p(r7,vga_video_port_val); | |
| /* reprotect registers */ | |
| outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); | |
| outb_p(vsync_end, vga_video_port_val); | |
| } | |
| raw_spin_unlock_irqrestore(&vga_lock, flags); | |
| return 0; | |
| } | |
| static int vgacon_switch(struct vc_data *c) | |
| { | |
| int x = c->vc_cols * VGA_FONTWIDTH; | |
| int y = c->vc_rows * c->vc_font.height; | |
| int rows = screen_info.orig_video_lines * vga_default_font_height/ | |
| c->vc_font.height; | |
| /* | |
| * We need to save screen size here as it's the only way | |
| * we can spot the screen has been resized and we need to | |
| * set size of freshly allocated screens ourselves. | |
| */ | |
| vga_video_num_columns = c->vc_cols; | |
| vga_video_num_lines = c->vc_rows; | |
| /* We can only copy out the size of the video buffer here, | |
| * otherwise we get into VGA BIOS */ | |
| if (!vga_is_gfx) { | |
| scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf, | |
| c->vc_screenbuf_size > vga_vram_size ? | |
| vga_vram_size : c->vc_screenbuf_size); | |
| if ((vgacon_xres != x || vgacon_yres != y) && | |
| (!(vga_video_num_columns % 2) && | |
| vga_video_num_columns <= screen_info.orig_video_cols && | |
| vga_video_num_lines <= rows)) | |
| vgacon_doresize(c, c->vc_cols, c->vc_rows); | |
| } | |
| vgacon_scrollback_switch(c->vc_num); | |
| return 0; /* Redrawing not needed */ | |
| } | |
| static void vga_set_palette(struct vc_data *vc, const unsigned char *table) | |
| { | |
| int i, j; | |
| vga_w(vgastate.vgabase, VGA_PEL_MSK, 0xff); | |
| for (i = j = 0; i < 16; i++) { | |
| vga_w(vgastate.vgabase, VGA_PEL_IW, table[i]); | |
| vga_w(vgastate.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2); | |
| vga_w(vgastate.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2); | |
| vga_w(vgastate.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2); | |
| } | |
| } | |
| static void vgacon_set_palette(struct vc_data *vc, const unsigned char *table) | |
| { | |
| if (vga_video_type != VIDEO_TYPE_VGAC || vga_palette_blanked | |
| || !con_is_visible(vc)) | |
| return; | |
| vga_set_palette(vc, table); | |
| } | |
| /* structure holding original VGA register settings */ | |
| static struct { | |
| unsigned char SeqCtrlIndex; /* Sequencer Index reg. */ | |
| unsigned char CrtCtrlIndex; /* CRT-Contr. Index reg. */ | |
| unsigned char CrtMiscIO; /* Miscellaneous register */ | |
| unsigned char HorizontalTotal; /* CRT-Controller:00h */ | |
| unsigned char HorizDisplayEnd; /* CRT-Controller:01h */ | |
| unsigned char StartHorizRetrace; /* CRT-Controller:04h */ | |
| unsigned char EndHorizRetrace; /* CRT-Controller:05h */ | |
| unsigned char Overflow; /* CRT-Controller:07h */ | |
| unsigned char StartVertRetrace; /* CRT-Controller:10h */ | |
| unsigned char EndVertRetrace; /* CRT-Controller:11h */ | |
| unsigned char ModeControl; /* CRT-Controller:17h */ | |
| unsigned char ClockingMode; /* Seq-Controller:01h */ | |
| } vga_state; | |
| static void vga_vesa_blank(struct vgastate *state, int mode) | |
| { | |
| /* save original values of VGA controller registers */ | |
| if (!vga_vesa_blanked) { | |
| raw_spin_lock_irq(&vga_lock); | |
| vga_state.SeqCtrlIndex = vga_r(state->vgabase, VGA_SEQ_I); | |
| vga_state.CrtCtrlIndex = inb_p(vga_video_port_reg); | |
| vga_state.CrtMiscIO = vga_r(state->vgabase, VGA_MIS_R); | |
| raw_spin_unlock_irq(&vga_lock); | |
| outb_p(0x00, vga_video_port_reg); /* HorizontalTotal */ | |
| vga_state.HorizontalTotal = inb_p(vga_video_port_val); | |
| outb_p(0x01, vga_video_port_reg); /* HorizDisplayEnd */ | |
| vga_state.HorizDisplayEnd = inb_p(vga_video_port_val); | |
| outb_p(0x04, vga_video_port_reg); /* StartHorizRetrace */ | |
| vga_state.StartHorizRetrace = inb_p(vga_video_port_val); | |
| outb_p(0x05, vga_video_port_reg); /* EndHorizRetrace */ | |
| vga_state.EndHorizRetrace = inb_p(vga_video_port_val); | |
| outb_p(0x07, vga_video_port_reg); /* Overflow */ | |
| vga_state.Overflow = inb_p(vga_video_port_val); | |
| outb_p(0x10, vga_video_port_reg); /* StartVertRetrace */ | |
| vga_state.StartVertRetrace = inb_p(vga_video_port_val); | |
| outb_p(0x11, vga_video_port_reg); /* EndVertRetrace */ | |
| vga_state.EndVertRetrace = inb_p(vga_video_port_val); | |
| outb_p(0x17, vga_video_port_reg); /* ModeControl */ | |
| vga_state.ModeControl = inb_p(vga_video_port_val); | |
| vga_state.ClockingMode = vga_rseq(state->vgabase, VGA_SEQ_CLOCK_MODE); | |
| } | |
| /* assure that video is enabled */ | |
| /* "0x20" is VIDEO_ENABLE_bit in register 01 of sequencer */ | |
| raw_spin_lock_irq(&vga_lock); | |
| vga_wseq(state->vgabase, VGA_SEQ_CLOCK_MODE, vga_state.ClockingMode | 0x20); | |
| /* test for vertical retrace in process.... */ | |
| if ((vga_state.CrtMiscIO & 0x80) == 0x80) | |
| vga_w(state->vgabase, VGA_MIS_W, vga_state.CrtMiscIO & 0xEF); | |
| /* | |
| * Set <End of vertical retrace> to minimum (0) and | |
| * <Start of vertical Retrace> to maximum (incl. overflow) | |
| * Result: turn off vertical sync (VSync) pulse. | |
| */ | |
| if (mode & VESA_VSYNC_SUSPEND) { | |
| outb_p(0x10, vga_video_port_reg); /* StartVertRetrace */ | |
| outb_p(0xff, vga_video_port_val); /* maximum value */ | |
| outb_p(0x11, vga_video_port_reg); /* EndVertRetrace */ | |
| outb_p(0x40, vga_video_port_val); /* minimum (bits 0..3) */ | |
| outb_p(0x07, vga_video_port_reg); /* Overflow */ | |
| outb_p(vga_state.Overflow | 0x84, vga_video_port_val); /* bits 9,10 of vert. retrace */ | |
| } | |
| if (mode & VESA_HSYNC_SUSPEND) { | |
| /* | |
| * Set <End of horizontal retrace> to minimum (0) and | |
| * <Start of horizontal Retrace> to maximum | |
| * Result: turn off horizontal sync (HSync) pulse. | |
| */ | |
| outb_p(0x04, vga_video_port_reg); /* StartHorizRetrace */ | |
| outb_p(0xff, vga_video_port_val); /* maximum */ | |
| outb_p(0x05, vga_video_port_reg); /* EndHorizRetrace */ | |
| outb_p(0x00, vga_video_port_val); /* minimum (0) */ | |
| } | |
| /* restore both index registers */ | |
| vga_w(state->vgabase, VGA_SEQ_I, vga_state.SeqCtrlIndex); | |
| outb_p(vga_state.CrtCtrlIndex, vga_video_port_reg); | |
| raw_spin_unlock_irq(&vga_lock); | |
| } | |
| static void vga_vesa_unblank(struct vgastate *state) | |
| { | |
| /* restore original values of VGA controller registers */ | |
| raw_spin_lock_irq(&vga_lock); | |
| vga_w(state->vgabase, VGA_MIS_W, vga_state.CrtMiscIO); | |
| outb_p(0x00, vga_video_port_reg); /* HorizontalTotal */ | |
| outb_p(vga_state.HorizontalTotal, vga_video_port_val); | |
| outb_p(0x01, vga_video_port_reg); /* HorizDisplayEnd */ | |
| outb_p(vga_state.HorizDisplayEnd, vga_video_port_val); | |
| outb_p(0x04, vga_video_port_reg); /* StartHorizRetrace */ | |
| outb_p(vga_state.StartHorizRetrace, vga_video_port_val); | |
| outb_p(0x05, vga_video_port_reg); /* EndHorizRetrace */ | |
| outb_p(vga_state.EndHorizRetrace, vga_video_port_val); | |
| outb_p(0x07, vga_video_port_reg); /* Overflow */ | |
| outb_p(vga_state.Overflow, vga_video_port_val); | |
| outb_p(0x10, vga_video_port_reg); /* StartVertRetrace */ | |
| outb_p(vga_state.StartVertRetrace, vga_video_port_val); | |
| outb_p(0x11, vga_video_port_reg); /* EndVertRetrace */ | |
| outb_p(vga_state.EndVertRetrace, vga_video_port_val); | |
| outb_p(0x17, vga_video_port_reg); /* ModeControl */ | |
| outb_p(vga_state.ModeControl, vga_video_port_val); | |
| /* ClockingMode */ | |
| vga_wseq(state->vgabase, VGA_SEQ_CLOCK_MODE, vga_state.ClockingMode); | |
| /* restore index/control registers */ | |
| vga_w(state->vgabase, VGA_SEQ_I, vga_state.SeqCtrlIndex); | |
| outb_p(vga_state.CrtCtrlIndex, vga_video_port_reg); | |
| raw_spin_unlock_irq(&vga_lock); | |
| } | |
| static void vga_pal_blank(struct vgastate *state) | |
| { | |
| int i; | |
| vga_w(state->vgabase, VGA_PEL_MSK, 0xff); | |
| for (i = 0; i < 16; i++) { | |
| vga_w(state->vgabase, VGA_PEL_IW, i); | |
| vga_w(state->vgabase, VGA_PEL_D, 0); | |
| vga_w(state->vgabase, VGA_PEL_D, 0); | |
| vga_w(state->vgabase, VGA_PEL_D, 0); | |
| } | |
| } | |
| static int vgacon_blank(struct vc_data *c, int blank, int mode_switch) | |
| { | |
| switch (blank) { | |
| case 0: /* Unblank */ | |
| if (vga_vesa_blanked) { | |
| vga_vesa_unblank(&vgastate); | |
| vga_vesa_blanked = 0; | |
| } | |
| if (vga_palette_blanked) { | |
| vga_set_palette(c, color_table); | |
| vga_palette_blanked = false; | |
| return 0; | |
| } | |
| vga_is_gfx = false; | |
| /* Tell console.c that it has to restore the screen itself */ | |
| return 1; | |
| case 1: /* Normal blanking */ | |
| case -1: /* Obsolete */ | |
| if (!mode_switch && vga_video_type == VIDEO_TYPE_VGAC) { | |
| vga_pal_blank(&vgastate); | |
| vga_palette_blanked = true; | |
| return 0; | |
| } | |
| vgacon_set_origin(c); | |
| scr_memsetw((void *) vga_vram_base, BLANK, | |
| c->vc_screenbuf_size); | |
| if (mode_switch) | |
| vga_is_gfx = true; | |
| return 1; | |
| default: /* VESA blanking */ | |
| if (vga_video_type == VIDEO_TYPE_VGAC) { | |
| vga_vesa_blank(&vgastate, blank - 1); | |
| vga_vesa_blanked = blank; | |
| } | |
| return 0; | |
| } | |
| } | |
| /* | |
| * PIO_FONT support. | |
| * | |
| * The font loading code goes back to the codepage package by | |
| * Joel Hoffman (joel@wam.umd.edu). (He reports that the original | |
| * reference is: "From: p. 307 of _Programmer's Guide to PC & PS/2 | |
| * Video Systems_ by Richard Wilton. 1987. Microsoft Press".) | |
| * | |
| * Change for certain monochrome monitors by Yury Shevchuck | |
| * (sizif@botik.yaroslavl.su). | |
| */ | |
| #define colourmap 0xa0000 | |
| /* Pauline Middelink <middelin@polyware.iaf.nl> reports that we | |
| should use 0xA0000 for the bwmap as well.. */ | |
| #define blackwmap 0xa0000 | |
| #define cmapsz 8192 | |
| static int vgacon_do_font_op(struct vgastate *state, char *arg, int set, | |
| bool ch512) | |
| { | |
| unsigned short video_port_status = vga_video_port_reg + 6; | |
| int font_select = 0x00, beg, i; | |
| char *charmap; | |
| bool clear_attribs = false; | |
| if (vga_video_type != VIDEO_TYPE_EGAM) { | |
| charmap = (char *) VGA_MAP_MEM(colourmap, 0); | |
| beg = 0x0e; | |
| } else { | |
| charmap = (char *) VGA_MAP_MEM(blackwmap, 0); | |
| beg = 0x0a; | |
| } | |
| #ifdef BROKEN_GRAPHICS_PROGRAMS | |
| /* | |
| * All fonts are loaded in slot 0 (0:1 for 512 ch) | |
| */ | |
| if (!arg) | |
| return -EINVAL; /* Return to default font not supported */ | |
| vga_font_is_default = false; | |
| font_select = ch512 ? 0x04 : 0x00; | |
| #else | |
| /* | |
| * The default font is kept in slot 0 and is never touched. | |
| * A custom font is loaded in slot 2 (256 ch) or 2:3 (512 ch) | |
| */ | |
| if (set) { | |
| vga_font_is_default = !arg; | |
| if (!arg) | |
| ch512 = false; /* Default font is always 256 */ | |
| font_select = arg ? (ch512 ? 0x0e : 0x0a) : 0x00; | |
| } | |
| if (!vga_font_is_default) | |
| charmap += 4 * cmapsz; | |
| #endif | |
| raw_spin_lock_irq(&vga_lock); | |
| /* First, the Sequencer */ | |
| vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1); | |
| /* CPU writes only to map 2 */ | |
| vga_wseq(state->vgabase, VGA_SEQ_PLANE_WRITE, 0x04); | |
| /* Sequential addressing */ | |
| vga_wseq(state->vgabase, VGA_SEQ_MEMORY_MODE, 0x07); | |
| /* Clear synchronous reset */ | |
| vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x03); | |
| /* Now, the graphics controller, select map 2 */ | |
| vga_wgfx(state->vgabase, VGA_GFX_PLANE_READ, 0x02); | |
| /* disable odd-even addressing */ | |
| vga_wgfx(state->vgabase, VGA_GFX_MODE, 0x00); | |
| /* map start at A000:0000 */ | |
| vga_wgfx(state->vgabase, VGA_GFX_MISC, 0x00); | |
| raw_spin_unlock_irq(&vga_lock); | |
| if (arg) { | |
| if (set) | |
| for (i = 0; i < cmapsz; i++) { | |
| vga_writeb(arg[i], charmap + i); | |
| cond_resched(); | |
| } | |
| else | |
| for (i = 0; i < cmapsz; i++) { | |
| arg[i] = vga_readb(charmap + i); | |
| cond_resched(); | |
| } | |
| /* | |
| * In 512-character mode, the character map is not contiguous if | |
| * we want to remain EGA compatible -- which we do | |
| */ | |
| if (ch512) { | |
| charmap += 2 * cmapsz; | |
| arg += cmapsz; | |
| if (set) | |
| for (i = 0; i < cmapsz; i++) { | |
| vga_writeb(arg[i], charmap + i); | |
| cond_resched(); | |
| } | |
| else | |
| for (i = 0; i < cmapsz; i++) { | |
| arg[i] = vga_readb(charmap + i); | |
| cond_resched(); | |
| } | |
| } | |
| } | |
| raw_spin_lock_irq(&vga_lock); | |
| /* First, the sequencer, Synchronous reset */ | |
| vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x01); | |
| /* CPU writes to maps 0 and 1 */ | |
| vga_wseq(state->vgabase, VGA_SEQ_PLANE_WRITE, 0x03); | |
| /* odd-even addressing */ | |
| vga_wseq(state->vgabase, VGA_SEQ_MEMORY_MODE, 0x03); | |
| /* Character Map Select */ | |
| if (set) | |
| vga_wseq(state->vgabase, VGA_SEQ_CHARACTER_MAP, font_select); | |
| /* clear synchronous reset */ | |
| vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x03); | |
| /* Now, the graphics controller, select map 0 for CPU */ | |
| vga_wgfx(state->vgabase, VGA_GFX_PLANE_READ, 0x00); | |
| /* enable even-odd addressing */ | |
| vga_wgfx(state->vgabase, VGA_GFX_MODE, 0x10); | |
| /* map starts at b800:0 or b000:0 */ | |
| vga_wgfx(state->vgabase, VGA_GFX_MISC, beg); | |
| /* if 512 char mode is already enabled don't re-enable it. */ | |
| if ((set) && (ch512 != vga_512_chars)) { | |
| vga_512_chars = ch512; | |
| /* 256-char: enable intensity bit | |
| 512-char: disable intensity bit */ | |
| inb_p(video_port_status); /* clear address flip-flop */ | |
| /* color plane enable register */ | |
| vga_wattr(state->vgabase, VGA_ATC_PLANE_ENABLE, ch512 ? 0x07 : 0x0f); | |
| /* Wilton (1987) mentions the following; I don't know what | |
| it means, but it works, and it appears necessary */ | |
| inb_p(video_port_status); | |
| vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0); | |
| clear_attribs = true; | |
| } | |
| raw_spin_unlock_irq(&vga_lock); | |
| if (clear_attribs) { | |
| for (i = 0; i < MAX_NR_CONSOLES; i++) { | |
| struct vc_data *c = vc_cons[i].d; | |
| if (c && c->vc_sw == &vga_con) { | |
| /* force hi font mask to 0, so we always clear | |
| the bit on either transition */ | |
| c->vc_hi_font_mask = 0x00; | |
| clear_buffer_attributes(c); | |
| c->vc_hi_font_mask = ch512 ? 0x0800 : 0; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Adjust the screen to fit a font of a certain height | |
| */ | |
| static int vgacon_adjust_height(struct vc_data *vc, unsigned fontheight) | |
| { | |
| unsigned char ovr, vde, fsr; | |
| int rows, maxscan, i; | |
| rows = vc->vc_scan_lines / fontheight; /* Number of video rows we end up with */ | |
| maxscan = rows * fontheight - 1; /* Scan lines to actually display-1 */ | |
| /* Reprogram the CRTC for the new font size | |
| Note: the attempt to read the overflow register will fail | |
| on an EGA, but using 0xff for the previous value appears to | |
| be OK for EGA text modes in the range 257-512 scan lines, so I | |
| guess we don't need to worry about it. | |
| The same applies for the spill bits in the font size and cursor | |
| registers; they are write-only on EGA, but it appears that they | |
| are all don't care bits on EGA, so I guess it doesn't matter. */ | |
| raw_spin_lock_irq(&vga_lock); | |
| outb_p(0x07, vga_video_port_reg); /* CRTC overflow register */ | |
| ovr = inb_p(vga_video_port_val); | |
| outb_p(0x09, vga_video_port_reg); /* Font size register */ | |
| fsr = inb_p(vga_video_port_val); | |
| raw_spin_unlock_irq(&vga_lock); | |
| vde = maxscan & 0xff; /* Vertical display end reg */ | |
| ovr = (ovr & 0xbd) + /* Overflow register */ | |
| ((maxscan & 0x100) >> 7) + ((maxscan & 0x200) >> 3); | |
| fsr = (fsr & 0xe0) + (fontheight - 1); /* Font size register */ | |
| raw_spin_lock_irq(&vga_lock); | |
| outb_p(0x07, vga_video_port_reg); /* CRTC overflow register */ | |
| outb_p(ovr, vga_video_port_val); | |
| outb_p(0x09, vga_video_port_reg); /* Font size */ | |
| outb_p(fsr, vga_video_port_val); | |
| outb_p(0x12, vga_video_port_reg); /* Vertical display limit */ | |
| outb_p(vde, vga_video_port_val); | |
| raw_spin_unlock_irq(&vga_lock); | |
| vga_video_font_height = fontheight; | |
| for (i = 0; i < MAX_NR_CONSOLES; i++) { | |
| struct vc_data *c = vc_cons[i].d; | |
| if (c && c->vc_sw == &vga_con) { | |
| if (con_is_visible(c)) { | |
| /* void size to cause regs to be rewritten */ | |
| cursor_size_lastfrom = 0; | |
| cursor_size_lastto = 0; | |
| c->vc_sw->con_cursor(c, CM_DRAW); | |
| } | |
| c->vc_font.height = fontheight; | |
| vc_resize(c, 0, rows); /* Adjust console size */ | |
| } | |
| } | |
| return 0; | |
| } | |
| static int vgacon_font_set(struct vc_data *c, struct console_font *font, unsigned flags) | |
| { | |
| unsigned charcount = font->charcount; | |
| int rc; | |
| if (vga_video_type < VIDEO_TYPE_EGAM) | |
| return -EINVAL; | |
| if (font->width != VGA_FONTWIDTH || | |
| (charcount != 256 && charcount != 512)) | |
| return -EINVAL; | |
| rc = vgacon_do_font_op(&vgastate, font->data, 1, charcount == 512); | |
| if (rc) | |
| return rc; | |
| if (!(flags & KD_FONT_FLAG_DONT_RECALC)) | |
| rc = vgacon_adjust_height(c, font->height); | |
| return rc; | |
| } | |
| static int vgacon_font_get(struct vc_data *c, struct console_font *font) | |
| { | |
| if (vga_video_type < VIDEO_TYPE_EGAM) | |
| return -EINVAL; | |
| font->width = VGA_FONTWIDTH; | |
| font->height = c->vc_font.height; | |
| font->charcount = vga_512_chars ? 512 : 256; | |
| if (!font->data) | |
| return 0; | |
| return vgacon_do_font_op(&vgastate, font->data, 0, vga_512_chars); | |
| } | |
| static int vgacon_resize(struct vc_data *c, unsigned int width, | |
| unsigned int height, unsigned int user) | |
| { | |
| if (width % 2 || width > screen_info.orig_video_cols || | |
| height > (screen_info.orig_video_lines * vga_default_font_height)/ | |
| c->vc_font.height) | |
| /* let svgatextmode tinker with video timings and | |
| return success */ | |
| return (user) ? 0 : -EINVAL; | |
| if (con_is_visible(c) && !vga_is_gfx) /* who knows */ | |
| vgacon_doresize(c, width, height); | |
| return 0; | |
| } | |
| static int vgacon_set_origin(struct vc_data *c) | |
| { | |
| if (vga_is_gfx || /* We don't play origin tricks in graphic modes */ | |
| (console_blanked && !vga_palette_blanked)) /* Nor we write to blanked screens */ | |
| return 0; | |
| c->vc_origin = c->vc_visible_origin = vga_vram_base; | |
| vga_set_mem_top(c); | |
| vga_rolled_over = 0; | |
| return 1; | |
| } | |
| static void vgacon_save_screen(struct vc_data *c) | |
| { | |
| static int vga_bootup_console = 0; | |
| if (!vga_bootup_console) { | |
| /* This is a gross hack, but here is the only place we can | |
| * set bootup console parameters without messing up generic | |
| * console initialization routines. | |
| */ | |
| vga_bootup_console = 1; | |
| c->vc_x = screen_info.orig_x; | |
| c->vc_y = screen_info.orig_y; | |
| } | |
| /* We can't copy in more than the size of the video buffer, | |
| * or we'll be copying in VGA BIOS */ | |
| if (!vga_is_gfx) | |
| scr_memcpyw((u16 *) c->vc_screenbuf, (u16 *) c->vc_origin, | |
| c->vc_screenbuf_size > vga_vram_size ? vga_vram_size : c->vc_screenbuf_size); | |
| } | |
| static bool vgacon_scroll(struct vc_data *c, unsigned int t, unsigned int b, | |
| enum con_scroll dir, unsigned int lines) | |
| { | |
| unsigned long oldo; | |
| unsigned int delta; | |
| if (t || b != c->vc_rows || vga_is_gfx || c->vc_mode != KD_TEXT) | |
| return false; | |
| if (!vga_hardscroll_enabled || lines >= c->vc_rows / 2) | |
| return false; | |
| vgacon_restore_screen(c); | |
| oldo = c->vc_origin; | |
| delta = lines * c->vc_size_row; | |
| if (dir == SM_UP) { | |
| vgacon_scrollback_update(c, t, lines); | |
| if (c->vc_scr_end + delta >= vga_vram_end) { | |
| scr_memcpyw((u16 *) vga_vram_base, | |
| (u16 *) (oldo + delta), | |
| c->vc_screenbuf_size - delta); | |
| c->vc_origin = vga_vram_base; | |
| vga_rolled_over = oldo - vga_vram_base; | |
| } else | |
| c->vc_origin += delta; | |
| scr_memsetw((u16 *) (c->vc_origin + c->vc_screenbuf_size - | |
| delta), c->vc_video_erase_char, | |
| delta); | |
| } else { | |
| if (oldo - delta < vga_vram_base) { | |
| scr_memmovew((u16 *) (vga_vram_end - | |
| c->vc_screenbuf_size + | |
| delta), (u16 *) oldo, | |
| c->vc_screenbuf_size - delta); | |
| c->vc_origin = vga_vram_end - c->vc_screenbuf_size; | |
| vga_rolled_over = 0; | |
| } else | |
| c->vc_origin -= delta; | |
| c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; | |
| scr_memsetw((u16 *) (c->vc_origin), c->vc_video_erase_char, | |
| delta); | |
| } | |
| c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; | |
| c->vc_visible_origin = c->vc_origin; | |
| vga_set_mem_top(c); | |
| c->vc_pos = (c->vc_pos - oldo) + c->vc_origin; | |
| return true; | |
| } | |
| /* | |
| * The console `switch' structure for the VGA based console | |
| */ | |
| static int vgacon_dummy(struct vc_data *c) | |
| { | |
| return 0; | |
| } | |
| #define DUMMY (void *) vgacon_dummy | |
| const struct consw vga_con = { | |
| .owner = THIS_MODULE, | |
| .con_startup = vgacon_startup, | |
| .con_init = vgacon_init, | |
| .con_deinit = vgacon_deinit, | |
| .con_clear = DUMMY, | |
| .con_putc = DUMMY, | |
| .con_putcs = DUMMY, | |
| .con_cursor = vgacon_cursor, | |
| .con_scroll = vgacon_scroll, | |
| .con_switch = vgacon_switch, | |
| .con_blank = vgacon_blank, | |
| .con_font_set = vgacon_font_set, | |
| .con_font_get = vgacon_font_get, | |
| .con_resize = vgacon_resize, | |
| .con_set_palette = vgacon_set_palette, | |
| .con_scrolldelta = vgacon_scrolldelta, | |
| .con_set_origin = vgacon_set_origin, | |
| .con_save_screen = vgacon_save_screen, | |
| .con_build_attr = vgacon_build_attr, | |
| .con_invert_region = vgacon_invert_region, | |
| .con_flush_scrollback = vgacon_flush_scrollback, | |
| }; | |
| EXPORT_SYMBOL(vga_con); | |
| MODULE_LICENSE("GPL"); |