| /* | |
| * Based on drivers/video/omap/lcd_inn1510.c | |
| * | |
| * LCD panel support for the Amstrad E3 (Delta) videophone. | |
| * | |
| * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/io.h> | |
| #include <linux/delay.h> | |
| #include <linux/lcd.h> | |
| #include <linux/gpio.h> | |
| #include <mach/hardware.h> | |
| #include <mach/board-ams-delta.h> | |
| #include "omapfb.h" | |
| #define AMS_DELTA_DEFAULT_CONTRAST 112 | |
| #define AMS_DELTA_MAX_CONTRAST 0x00FF | |
| #define AMS_DELTA_LCD_POWER 0x0100 | |
| /* LCD class device section */ | |
| static int ams_delta_lcd; | |
| static int ams_delta_lcd_set_power(struct lcd_device *dev, int power) | |
| { | |
| if (power == FB_BLANK_UNBLANK) { | |
| if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER)) { | |
| omap_writeb(ams_delta_lcd & AMS_DELTA_MAX_CONTRAST, | |
| OMAP_PWL_ENABLE); | |
| omap_writeb(1, OMAP_PWL_CLK_ENABLE); | |
| ams_delta_lcd |= AMS_DELTA_LCD_POWER; | |
| } | |
| } else { | |
| if (ams_delta_lcd & AMS_DELTA_LCD_POWER) { | |
| omap_writeb(0, OMAP_PWL_ENABLE); | |
| omap_writeb(0, OMAP_PWL_CLK_ENABLE); | |
| ams_delta_lcd &= ~AMS_DELTA_LCD_POWER; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int ams_delta_lcd_set_contrast(struct lcd_device *dev, int value) | |
| { | |
| if ((value >= 0) && (value <= AMS_DELTA_MAX_CONTRAST)) { | |
| omap_writeb(value, OMAP_PWL_ENABLE); | |
| ams_delta_lcd &= ~AMS_DELTA_MAX_CONTRAST; | |
| ams_delta_lcd |= value; | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_LCD_CLASS_DEVICE | |
| static int ams_delta_lcd_get_power(struct lcd_device *dev) | |
| { | |
| if (ams_delta_lcd & AMS_DELTA_LCD_POWER) | |
| return FB_BLANK_UNBLANK; | |
| else | |
| return FB_BLANK_POWERDOWN; | |
| } | |
| static int ams_delta_lcd_get_contrast(struct lcd_device *dev) | |
| { | |
| if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER)) | |
| return 0; | |
| return ams_delta_lcd & AMS_DELTA_MAX_CONTRAST; | |
| } | |
| static struct lcd_ops ams_delta_lcd_ops = { | |
| .get_power = ams_delta_lcd_get_power, | |
| .set_power = ams_delta_lcd_set_power, | |
| .get_contrast = ams_delta_lcd_get_contrast, | |
| .set_contrast = ams_delta_lcd_set_contrast, | |
| }; | |
| #endif | |
| /* omapfb panel section */ | |
| static const struct gpio _gpios[] = { | |
| { | |
| .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, | |
| .flags = GPIOF_OUT_INIT_LOW, | |
| .label = "lcd_vblen", | |
| }, | |
| { | |
| .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, | |
| .flags = GPIOF_OUT_INIT_LOW, | |
| .label = "lcd_ndisp", | |
| }, | |
| }; | |
| static int ams_delta_panel_init(struct lcd_panel *panel, | |
| struct omapfb_device *fbdev) | |
| { | |
| return gpio_request_array(_gpios, ARRAY_SIZE(_gpios)); | |
| } | |
| static void ams_delta_panel_cleanup(struct lcd_panel *panel) | |
| { | |
| gpio_free_array(_gpios, ARRAY_SIZE(_gpios)); | |
| } | |
| static int ams_delta_panel_enable(struct lcd_panel *panel) | |
| { | |
| gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 1); | |
| gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 1); | |
| return 0; | |
| } | |
| static void ams_delta_panel_disable(struct lcd_panel *panel) | |
| { | |
| gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 0); | |
| gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 0); | |
| } | |
| static struct lcd_panel ams_delta_panel = { | |
| .name = "ams-delta", | |
| .config = 0, | |
| .bpp = 12, | |
| .data_lines = 16, | |
| .x_res = 480, | |
| .y_res = 320, | |
| .pixel_clock = 4687, | |
| .hsw = 3, | |
| .hfp = 1, | |
| .hbp = 1, | |
| .vsw = 1, | |
| .vfp = 0, | |
| .vbp = 0, | |
| .pcd = 0, | |
| .acb = 37, | |
| .init = ams_delta_panel_init, | |
| .cleanup = ams_delta_panel_cleanup, | |
| .enable = ams_delta_panel_enable, | |
| .disable = ams_delta_panel_disable, | |
| }; | |
| /* platform driver section */ | |
| static int ams_delta_panel_probe(struct platform_device *pdev) | |
| { | |
| struct lcd_device *lcd_device = NULL; | |
| #ifdef CONFIG_LCD_CLASS_DEVICE | |
| int ret; | |
| lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL, | |
| &ams_delta_lcd_ops); | |
| if (IS_ERR(lcd_device)) { | |
| ret = PTR_ERR(lcd_device); | |
| dev_err(&pdev->dev, "failed to register device\n"); | |
| return ret; | |
| } | |
| platform_set_drvdata(pdev, lcd_device); | |
| lcd_device->props.max_contrast = AMS_DELTA_MAX_CONTRAST; | |
| #endif | |
| ams_delta_lcd_set_contrast(lcd_device, AMS_DELTA_DEFAULT_CONTRAST); | |
| ams_delta_lcd_set_power(lcd_device, FB_BLANK_UNBLANK); | |
| omapfb_register_panel(&ams_delta_panel); | |
| return 0; | |
| } | |
| static struct platform_driver ams_delta_panel_driver = { | |
| .probe = ams_delta_panel_probe, | |
| .driver = { | |
| .name = "lcd_ams_delta", | |
| }, | |
| }; | |
| module_platform_driver(ams_delta_panel_driver); |