| /* |
| * TI CAL camera interface driver |
| * |
| * Copyright (c) 2015 Texas Instruments Inc. |
| * Benoit Parrot, <bparrot@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/ioctl.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| #include <linux/videodev2.h> |
| #include <linux/of_device.h> |
| #include <linux/of_graph.h> |
| |
| #include <media/v4l2-of.h> |
| #include <media/v4l2-async.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-event.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-fh.h> |
| #include <media/v4l2-event.h> |
| #include <media/v4l2-common.h> |
| #include <media/videobuf2-core.h> |
| #include <media/videobuf2-dma-contig.h> |
| #include "cal_regs.h" |
| |
| #define CAL_MODULE_NAME "cal" |
| |
| #define MAX_WIDTH 1920 |
| #define MAX_HEIGHT 1200 |
| |
| #define CAL_VERSION "0.1.0" |
| |
| MODULE_DESCRIPTION("TI CAL driver"); |
| MODULE_AUTHOR("Benoit Parrot, <bparrot@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_VERSION(CAL_VERSION); |
| |
| static unsigned video_nr = -1; |
| module_param(video_nr, uint, 0644); |
| MODULE_PARM_DESC(video_nr, "videoX start number, -1 is autodetect"); |
| |
| static unsigned debug; |
| module_param(debug, uint, 0644); |
| MODULE_PARM_DESC(debug, "activates debug info"); |
| |
| /* timeperframe: min/max and default */ |
| static const struct v4l2_fract |
| tpf_default = {.numerator = 1001, .denominator = 30000}; |
| |
| #define cal_dbg(level, caldev, fmt, arg...) \ |
| v4l2_dbg(level, debug, &caldev->v4l2_dev, fmt, ##arg) |
| #define cal_info(caldev, fmt, arg...) \ |
| v4l2_info(&caldev->v4l2_dev, fmt, ##arg) |
| #define cal_err(caldev, fmt, arg...) \ |
| v4l2_err(&caldev->v4l2_dev, fmt, ##arg) |
| |
| #define ctx_dbg(level, ctx, fmt, arg...) \ |
| v4l2_dbg(level, debug, &ctx->v4l2_dev, fmt, ##arg) |
| #define ctx_info(ctx, fmt, arg...) \ |
| v4l2_info(&ctx->v4l2_dev, fmt, ##arg) |
| #define ctx_err(ctx, fmt, arg...) \ |
| v4l2_err(&ctx->v4l2_dev, fmt, ##arg) |
| |
| #define CAL_NUM_INPUT 1 |
| #define CAL_NUM_CONTEXT 2 |
| |
| #define bytes_per_line(pixel, bpp) (ALIGN(pixel * bpp, 16)) |
| |
| #define reg_read(dev, offset) ioread32(dev->base + offset) |
| #define reg_write(dev, offset, val) iowrite32(val, dev->base + offset) |
| |
| #define reg_read_field(dev, offset, mask) get_field(reg_read(dev, offset), \ |
| mask) |
| #define reg_write_field(dev, offset, field, mask) { \ |
| u32 val = reg_read(dev, offset); \ |
| set_field(&val, field, mask); \ |
| reg_write(dev, offset, val); } |
| |
| /* ------------------------------------------------------------------ |
| * Basic structures |
| * ------------------------------------------------------------------ |
| */ |
| |
| struct cal_fmt { |
| u32 fourcc; |
| u32 code; |
| u8 depth; |
| }; |
| |
| static struct cal_fmt cal_formats[] = { |
| { |
| .fourcc = V4L2_PIX_FMT_YUYV, |
| .code = MEDIA_BUS_FMT_YUYV8_2X8, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_UYVY, |
| .code = MEDIA_BUS_FMT_UYVY8_2X8, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_YVYU, |
| .code = MEDIA_BUS_FMT_YVYU8_2X8, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_VYUY, |
| .code = MEDIA_BUS_FMT_VYUY8_2X8, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ |
| .code = MEDIA_BUS_FMT_RGB565_2X8_LE, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ |
| .code = MEDIA_BUS_FMT_RGB565_2X8_BE, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */ |
| .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */ |
| .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */ |
| .code = MEDIA_BUS_FMT_RGB888_2X12_LE, |
| .depth = 24, |
| }, { |
| .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */ |
| .code = MEDIA_BUS_FMT_RGB888_2X12_BE, |
| .depth = 24, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB32, /* argb */ |
| .code = MEDIA_BUS_FMT_ARGB8888_1X32, |
| .depth = 32, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SBGGR8, |
| .code = MEDIA_BUS_FMT_SBGGR8_1X8, |
| .depth = 8, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGBRG8, |
| .code = MEDIA_BUS_FMT_SGBRG8_1X8, |
| .depth = 8, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGRBG8, |
| .code = MEDIA_BUS_FMT_SGRBG8_1X8, |
| .depth = 8, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SRGGB8, |
| .code = MEDIA_BUS_FMT_SRGGB8_1X8, |
| .depth = 8, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SBGGR10, |
| .code = MEDIA_BUS_FMT_SBGGR10_1X10, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGBRG10, |
| .code = MEDIA_BUS_FMT_SGBRG10_1X10, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGRBG10, |
| .code = MEDIA_BUS_FMT_SGRBG10_1X10, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SRGGB10, |
| .code = MEDIA_BUS_FMT_SRGGB10_1X10, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SBGGR12, |
| .code = MEDIA_BUS_FMT_SBGGR12_1X12, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGBRG12, |
| .code = MEDIA_BUS_FMT_SGBRG12_1X12, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGRBG12, |
| .code = MEDIA_BUS_FMT_SGRBG12_1X12, |
| .depth = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SRGGB12, |
| .code = MEDIA_BUS_FMT_SRGGB12_1X12, |
| .depth = 16, |
| }, |
| }; |
| |
| /* Print Four-character-code (FOURCC) */ |
| static char *fourcc_to_str(u32 fmt) |
| { |
| static char code[5]; |
| |
| code[0] = (unsigned char)(fmt & 0xff); |
| code[1] = (unsigned char)((fmt >> 8) & 0xff); |
| code[2] = (unsigned char)((fmt >> 16) & 0xff); |
| code[3] = (unsigned char)((fmt >> 24) & 0xff); |
| code[4] = '\0'; |
| |
| return code; |
| } |
| |
| /* buffer for one video frame */ |
| struct cal_buffer { |
| /* common v4l buffer stuff -- must be first */ |
| struct vb2_v4l2_buffer vb; |
| struct list_head list; |
| const struct cal_fmt *fmt; |
| }; |
| |
| struct cal_dmaqueue { |
| struct list_head active; |
| |
| /* Counters to control fps rate */ |
| int frame; |
| int ini_jiffies; |
| }; |
| |
| struct cm_data { |
| void __iomem *base; |
| struct resource *res; |
| |
| unsigned int camerrx_control; |
| |
| struct platform_device *pdev; |
| }; |
| |
| struct cc_data { |
| void __iomem *base; |
| struct resource *res; |
| |
| struct platform_device *pdev; |
| }; |
| |
| /* |
| * there is one cal_dev structure in the driver, it is shared by |
| * all instances. |
| */ |
| struct cal_dev { |
| int irq; |
| void __iomem *base; |
| struct resource *res; |
| struct platform_device *pdev; |
| struct v4l2_device v4l2_dev; |
| |
| /* Control Module handle */ |
| struct cm_data *cm; |
| /* Camera Core Module handle */ |
| struct cc_data *cc[CAL_NUM_CSI2_PORTS]; |
| |
| struct cal_ctx *ctx[CAL_NUM_CONTEXT]; |
| }; |
| |
| /* |
| * There is one cal_ctx structure for each camera core context. |
| */ |
| struct cal_ctx { |
| struct v4l2_device v4l2_dev; |
| struct v4l2_ctrl_handler ctrl_handler; |
| struct video_device vdev; |
| struct v4l2_async_notifier notifier; |
| struct v4l2_subdev *sensor; |
| struct v4l2_of_endpoint endpoint; |
| |
| struct v4l2_async_subdev asd; |
| struct v4l2_async_subdev *asd_list[1]; |
| |
| struct v4l2_fh fh; |
| struct cal_dev *dev; |
| struct cc_data *cc; |
| |
| /* v4l2_ioctl mutex */ |
| struct mutex mutex; |
| /* v4l2 buffers lock */ |
| spinlock_t slock; |
| |
| /* Several counters */ |
| unsigned long jiffies; |
| |
| struct cal_dmaqueue vidq; |
| |
| /* Input Number */ |
| int input; |
| |
| /* video capture */ |
| const struct cal_fmt *fmt; |
| /* Used to store current pixel format */ |
| struct v4l2_format v_fmt; |
| /* Used to store current mbus frame format */ |
| struct v4l2_mbus_framefmt m_fmt; |
| |
| /* Current subdev enumerated format */ |
| struct cal_fmt *active_fmt[ARRAY_SIZE(cal_formats)]; |
| int num_active_fmt; |
| |
| struct v4l2_fract timeperframe; |
| unsigned int sequence; |
| unsigned int external_rate; |
| struct vb2_queue vb_vidq; |
| unsigned int seq_count; |
| unsigned int csi2_port; |
| unsigned int virtual_channel; |
| |
| /* Pointer pointing to current v4l2_buffer */ |
| struct cal_buffer *cur_frm; |
| /* Pointer pointing to next v4l2_buffer */ |
| struct cal_buffer *next_frm; |
| }; |
| |
| static const struct cal_fmt *find_format_by_pix(struct cal_ctx *ctx, |
| u32 pixelformat) |
| { |
| const struct cal_fmt *fmt; |
| unsigned int k; |
| |
| for (k = 0; k < ctx->num_active_fmt; k++) { |
| fmt = ctx->active_fmt[k]; |
| if (fmt->fourcc == pixelformat) |
| return fmt; |
| } |
| |
| return NULL; |
| } |
| |
| static const struct cal_fmt *find_format_by_code(struct cal_ctx *ctx, |
| u32 code) |
| { |
| const struct cal_fmt *fmt; |
| unsigned int k; |
| |
| for (k = 0; k < ctx->num_active_fmt; k++) { |
| fmt = ctx->active_fmt[k]; |
| if (fmt->code == code) |
| return fmt; |
| } |
| |
| return NULL; |
| } |
| |
| static inline struct cal_ctx *notifier_to_ctx(struct v4l2_async_notifier *n) |
| { |
| return container_of(n, struct cal_ctx, notifier); |
| } |
| |
| static inline int get_field(u32 value, u32 mask) |
| { |
| return (value & mask) >> __ffs(mask); |
| } |
| |
| static inline void set_field(u32 *valp, u32 field, u32 mask) |
| { |
| u32 val = *valp; |
| |
| val &= ~mask; |
| val |= (field << __ffs(mask)) & mask; |
| *valp = val; |
| } |
| |
| /* |
| * Control Module block access |
| */ |
| static struct cm_data *cm_create(struct cal_dev *dev) |
| { |
| struct platform_device *pdev = dev->pdev; |
| struct cm_data *cm; |
| |
| cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL); |
| if (!cm) |
| return ERR_PTR(-ENOMEM); |
| |
| cm->res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "camerrx_control"); |
| cm->base = devm_ioremap_resource(&pdev->dev, cm->res); |
| if (IS_ERR(cm->base)) { |
| cal_err(dev, "failed to ioremap\n"); |
| return ERR_CAST(cm->base); |
| } |
| |
| cal_dbg(1, dev, "ioresource %s at %pa - %pa\n", |
| cm->res->name, &cm->res->start, &cm->res->end); |
| |
| return cm; |
| } |
| |
| static void camerarx_phy_enable(struct cal_ctx *ctx) |
| { |
| u32 val; |
| |
| if (!ctx->dev->cm->base) { |
| ctx_err(ctx, "cm not mapped\n"); |
| return; |
| } |
| |
| val = reg_read(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL); |
| if (ctx->csi2_port == 1) { |
| set_field(&val, 1, CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_MASK); |
| set_field(&val, 0, CM_CAMERRX_CTRL_CSI0_CAMMODE_MASK); |
| /* enable all lanes by default */ |
| set_field(&val, 0xf, CM_CAMERRX_CTRL_CSI0_LANEENABLE_MASK); |
| set_field(&val, 1, CM_CAMERRX_CTRL_CSI0_MODE_MASK); |
| } else if (ctx->csi2_port == 2) { |
| set_field(&val, 1, CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_MASK); |
| set_field(&val, 0, CM_CAMERRX_CTRL_CSI1_CAMMODE_MASK); |
| /* enable all lanes by default */ |
| set_field(&val, 0x3, CM_CAMERRX_CTRL_CSI1_LANEENABLE_MASK); |
| set_field(&val, 1, CM_CAMERRX_CTRL_CSI1_MODE_MASK); |
| } |
| reg_write(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL, val); |
| } |
| |
| static void camerarx_phy_disable(struct cal_ctx *ctx) |
| { |
| u32 val; |
| |
| if (!ctx->dev->cm->base) { |
| ctx_err(ctx, "cm not mapped\n"); |
| return; |
| } |
| |
| val = reg_read(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL); |
| if (ctx->csi2_port == 1) |
| set_field(&val, 0x0, CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_MASK); |
| else if (ctx->csi2_port == 2) |
| set_field(&val, 0x0, CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_MASK); |
| reg_write(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL, val); |
| } |
| |
| /* |
| * Camera Instance access block |
| */ |
| static struct cc_data *cc_create(struct cal_dev *dev, unsigned int core) |
| { |
| struct platform_device *pdev = dev->pdev; |
| struct cc_data *cc; |
| |
| cc = devm_kzalloc(&pdev->dev, sizeof(*cc), GFP_KERNEL); |
| if (!cc) |
| return ERR_PTR(-ENOMEM); |
| |
| cc->res = platform_get_resource_byname(pdev, |
| IORESOURCE_MEM, |
| (core == 0) ? |
| "cal_rx_core0" : |
| "cal_rx_core1"); |
| cc->base = devm_ioremap_resource(&pdev->dev, cc->res); |
| if (IS_ERR(cc->base)) { |
| cal_err(dev, "failed to ioremap\n"); |
| return ERR_CAST(cc->base); |
| } |
| |
| cal_dbg(1, dev, "ioresource %s at %pa - %pa\n", |
| cc->res->name, &cc->res->start, &cc->res->end); |
| |
| return cc; |
| } |
| |
| /* |
| * Get Revision and HW info |
| */ |
| static void cal_get_hwinfo(struct cal_dev *dev) |
| { |
| u32 revision = 0; |
| u32 hwinfo = 0; |
| |
| revision = reg_read(dev, CAL_HL_REVISION); |
| cal_dbg(3, dev, "CAL_HL_REVISION = 0x%08x (expecting 0x40000200)\n", |
| revision); |
| |
| hwinfo = reg_read(dev, CAL_HL_HWINFO); |
| cal_dbg(3, dev, "CAL_HL_HWINFO = 0x%08x (expecting 0xA3C90469)\n", |
| hwinfo); |
| } |
| |
| static inline int cal_runtime_get(struct cal_dev *dev) |
| { |
| int r; |
| |
| r = pm_runtime_get_sync(&dev->pdev->dev); |
| |
| return r; |
| } |
| |
| static inline void cal_runtime_put(struct cal_dev *dev) |
| { |
| pm_runtime_put_sync(&dev->pdev->dev); |
| } |
| |
| static void cal_quickdump_regs(struct cal_dev *dev) |
| { |
| cal_info(dev, "CAL Registers @ 0x%pa:\n", &dev->res->start); |
| print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4, |
| (__force const void *)dev->base, |
| resource_size(dev->res), false); |
| |
| if (dev->ctx[0]) { |
| cal_info(dev, "CSI2 Core 0 Registers @ %pa:\n", |
| &dev->ctx[0]->cc->res->start); |
| print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4, |
| (__force const void *)dev->ctx[0]->cc->base, |
| resource_size(dev->ctx[0]->cc->res), |
| false); |
| } |
| |
| if (dev->ctx[1]) { |
| cal_info(dev, "CSI2 Core 1 Registers @ %pa:\n", |
| &dev->ctx[1]->cc->res->start); |
| print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4, |
| (__force const void *)dev->ctx[1]->cc->base, |
| resource_size(dev->ctx[1]->cc->res), |
| false); |
| } |
| |
| cal_info(dev, "CAMERRX_Control Registers @ %pa:\n", |
| &dev->cm->res->start); |
| print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4, |
| (__force const void *)dev->cm->base, |
| resource_size(dev->cm->res), false); |
| } |
| |
| /* |
| * Enable the expected IRQ sources |
| */ |
| static void enable_irqs(struct cal_ctx *ctx) |
| { |
| /* Enable IRQ_WDMA_END 0/1 */ |
| reg_write_field(ctx->dev, |
| CAL_HL_IRQENABLE_SET(2), |
| CAL_HL_IRQ_ENABLE, |
| CAL_HL_IRQ_MASK(ctx->csi2_port)); |
| /* Enable IRQ_WDMA_START 0/1 */ |
| reg_write_field(ctx->dev, |
| CAL_HL_IRQENABLE_SET(3), |
| CAL_HL_IRQ_ENABLE, |
| CAL_HL_IRQ_MASK(ctx->csi2_port)); |
| /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */ |
| reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0xFF000000); |
| } |
| |
| static void disable_irqs(struct cal_ctx *ctx) |
| { |
| /* Disable IRQ_WDMA_END 0/1 */ |
| reg_write_field(ctx->dev, |
| CAL_HL_IRQENABLE_CLR(2), |
| CAL_HL_IRQ_CLEAR, |
| CAL_HL_IRQ_MASK(ctx->csi2_port)); |
| /* Disable IRQ_WDMA_START 0/1 */ |
| reg_write_field(ctx->dev, |
| CAL_HL_IRQENABLE_CLR(3), |
| CAL_HL_IRQ_CLEAR, |
| CAL_HL_IRQ_MASK(ctx->csi2_port)); |
| /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */ |
| reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0); |
| } |
| |
| static void csi2_init(struct cal_ctx *ctx) |
| { |
| int i; |
| u32 val; |
| |
| val = reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port)); |
| set_field(&val, CAL_GEN_ENABLE, |
| CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK); |
| set_field(&val, CAL_GEN_ENABLE, |
| CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK); |
| set_field(&val, CAL_GEN_DISABLE, |
| CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK); |
| set_field(&val, 407, CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK); |
| reg_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val); |
| ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x\n", ctx->csi2_port, |
| reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port))); |
| |
| val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port)); |
| set_field(&val, CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL, |
| CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK); |
| set_field(&val, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON, |
| CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK); |
| reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val); |
| for (i = 0; i < 10; i++) { |
| if (reg_read_field(ctx->dev, |
| CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), |
| CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK) == |
| CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_ON) |
| break; |
| usleep_range(1000, 1100); |
| } |
| ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n", ctx->csi2_port, |
| reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port))); |
| |
| val = reg_read(ctx->dev, CAL_CTRL); |
| set_field(&val, CAL_CTRL_BURSTSIZE_BURST128, CAL_CTRL_BURSTSIZE_MASK); |
| set_field(&val, 0xF, CAL_CTRL_TAGCNT_MASK); |
| set_field(&val, CAL_CTRL_POSTED_WRITES_NONPOSTED, |
| CAL_CTRL_POSTED_WRITES_MASK); |
| set_field(&val, 0xFF, CAL_CTRL_MFLAGL_MASK); |
| set_field(&val, 0xFF, CAL_CTRL_MFLAGH_MASK); |
| reg_write(ctx->dev, CAL_CTRL, val); |
| ctx_dbg(3, ctx, "CAL_CTRL = 0x%08x\n", reg_read(ctx->dev, CAL_CTRL)); |
| } |
| |
| static void csi2_lane_config(struct cal_ctx *ctx) |
| { |
| u32 val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port)); |
| u32 lane_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK; |
| u32 polarity_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK; |
| struct v4l2_of_bus_mipi_csi2 *mipi_csi2 = &ctx->endpoint.bus.mipi_csi2; |
| int lane; |
| |
| set_field(&val, mipi_csi2->clock_lane + 1, lane_mask); |
| set_field(&val, mipi_csi2->lane_polarities[0], polarity_mask); |
| for (lane = 0; lane < mipi_csi2->num_data_lanes; lane++) { |
| /* |
| * Every lane are one nibble apart starting with the |
| * clock followed by the data lanes so shift masks by 4. |
| */ |
| lane_mask <<= 4; |
| polarity_mask <<= 4; |
| set_field(&val, mipi_csi2->data_lanes[lane] + 1, lane_mask); |
| set_field(&val, mipi_csi2->lane_polarities[lane + 1], |
| polarity_mask); |
| } |
| |
| reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val); |
| ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n", |
| ctx->csi2_port, val); |
| } |
| |
| static void csi2_ppi_enable(struct cal_ctx *ctx) |
| { |
| reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port), |
| CAL_GEN_ENABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK); |
| } |
| |
| static void csi2_ppi_disable(struct cal_ctx *ctx) |
| { |
| reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port), |
| CAL_GEN_DISABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK); |
| } |
| |
| static void csi2_ctx_config(struct cal_ctx *ctx) |
| { |
| u32 val; |
| |
| val = reg_read(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port)); |
| set_field(&val, ctx->csi2_port, CAL_CSI2_CTX_CPORT_MASK); |
| /* |
| * DT type: MIPI CSI-2 Specs |
| * 0x1: All - DT filter is disabled |
| * 0x24: RGB888 1 pixel = 3 bytes |
| * 0x2B: RAW10 4 pixels = 5 bytes |
| * 0x2A: RAW8 1 pixel = 1 byte |
| * 0x1E: YUV422 2 pixels = 4 bytes |
| */ |
| set_field(&val, 0x1, CAL_CSI2_CTX_DT_MASK); |
| /* Virtual Channel from the CSI2 sensor usually 0! */ |
| set_field(&val, ctx->virtual_channel, CAL_CSI2_CTX_VC_MASK); |
| /* NUM_LINES_PER_FRAME => 0 means auto detect */ |
| set_field(&val, 0, CAL_CSI2_CTX_LINES_MASK); |
| set_field(&val, CAL_CSI2_CTX_ATT_PIX, CAL_CSI2_CTX_ATT_MASK); |
| set_field(&val, CAL_CSI2_CTX_PACK_MODE_LINE, |
| CAL_CSI2_CTX_PACK_MODE_MASK); |
| reg_write(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port), val); |
| ctx_dbg(3, ctx, "CAL_CSI2_CTX0(%d) = 0x%08x\n", ctx->csi2_port, |
| reg_read(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port))); |
| } |
| |
| static void pix_proc_config(struct cal_ctx *ctx) |
| { |
| u32 val; |
| |
| val = reg_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port)); |
| set_field(&val, CAL_PIX_PROC_EXTRACT_B8, CAL_PIX_PROC_EXTRACT_MASK); |
| set_field(&val, CAL_PIX_PROC_DPCMD_BYPASS, CAL_PIX_PROC_DPCMD_MASK); |
| set_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK); |
| set_field(&val, CAL_PIX_PROC_PACK_B8, CAL_PIX_PROC_PACK_MASK); |
| set_field(&val, ctx->csi2_port, CAL_PIX_PROC_CPORT_MASK); |
| set_field(&val, CAL_GEN_ENABLE, CAL_PIX_PROC_EN_MASK); |
| reg_write(ctx->dev, CAL_PIX_PROC(ctx->csi2_port), val); |
| ctx_dbg(3, ctx, "CAL_PIX_PROC(%d) = 0x%08x\n", ctx->csi2_port, |
| reg_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port))); |
| } |
| |
| static void cal_wr_dma_config(struct cal_ctx *ctx, |
| unsigned int width) |
| { |
| u32 val; |
| |
| val = reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port)); |
| set_field(&val, ctx->csi2_port, CAL_WR_DMA_CTRL_CPORT_MASK); |
| set_field(&val, CAL_WR_DMA_CTRL_DTAG_PIX_DAT, |
| CAL_WR_DMA_CTRL_DTAG_MASK); |
| set_field(&val, CAL_WR_DMA_CTRL_MODE_CONST, |
| CAL_WR_DMA_CTRL_MODE_MASK); |
| set_field(&val, CAL_WR_DMA_CTRL_PATTERN_LINEAR, |
| CAL_WR_DMA_CTRL_PATTERN_MASK); |
| set_field(&val, CAL_GEN_ENABLE, CAL_WR_DMA_CTRL_STALL_RD_MASK); |
| reg_write(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port), val); |
| ctx_dbg(3, ctx, "CAL_WR_DMA_CTRL(%d) = 0x%08x\n", ctx->csi2_port, |
| reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port))); |
| |
| /* |
| * width/16 not sure but giving it a whirl. |
| * zero does not work right |
| */ |
| reg_write_field(ctx->dev, |
| CAL_WR_DMA_OFST(ctx->csi2_port), |
| (width / 16), |
| CAL_WR_DMA_OFST_MASK); |
| ctx_dbg(3, ctx, "CAL_WR_DMA_OFST(%d) = 0x%08x\n", ctx->csi2_port, |
| reg_read(ctx->dev, CAL_WR_DMA_OFST(ctx->csi2_port))); |
| |
| val = reg_read(ctx->dev, CAL_WR_DMA_XSIZE(ctx->csi2_port)); |
| /* 64 bit word means no skipping */ |
| set_field(&val, 0, CAL_WR_DMA_XSIZE_XSKIP_MASK); |
| /* |
| * (width*8)/64 this should be size of an entire line |
| * in 64bit word but 0 means all data until the end |
| * is detected automagically |
| */ |
| set_field(&val, (width / 8), CAL_WR_DMA_XSIZE_MASK); |
| reg_write(ctx->dev, CAL_WR_DMA_XSIZE(ctx->csi2_port), val); |
| ctx_dbg(3, ctx, "CAL_WR_DMA_XSIZE(%d) = 0x%08x\n", ctx->csi2_port, |
| reg_read(ctx->dev, CAL_WR_DMA_XSIZE(ctx->csi2_port))); |
| } |
| |
| static void cal_wr_dma_addr(struct cal_ctx *ctx, unsigned int dmaaddr) |
| { |
| reg_write(ctx->dev, CAL_WR_DMA_ADDR(ctx->csi2_port), dmaaddr); |
| } |
| |
| /* |
| * TCLK values are OK at their reset values |
| */ |
| #define TCLK_TERM 0 |
| #define TCLK_MISS 1 |
| #define TCLK_SETTLE 14 |
| #define THS_SETTLE 15 |
| |
| static void csi2_phy_config(struct cal_ctx *ctx) |
| { |
| unsigned int reg0, reg1; |
| unsigned int ths_term, ths_settle; |
| unsigned int ddrclkperiod_us; |
| |
| /* |
| * THS_TERM: Programmed value = floor(20 ns/DDRClk period) - 2. |
| */ |
| ddrclkperiod_us = ctx->external_rate / 2000000; |
| ddrclkperiod_us = 1000000 / ddrclkperiod_us; |
| ctx_dbg(1, ctx, "ddrclkperiod_us: %d\n", ddrclkperiod_us); |
| |
| ths_term = 20000 / ddrclkperiod_us; |
| ths_term = (ths_term >= 2) ? ths_term - 2 : ths_term; |
| ctx_dbg(1, ctx, "ths_term: %d (0x%02x)\n", ths_term, ths_term); |
| |
| /* |
| * THS_SETTLE: Programmed value = floor(176.3 ns/CtrlClk period) - 1. |
| * Since CtrlClk is fixed at 96Mhz then we get |
| * ths_settle = floor(176.3 / 10.416) - 1 = 15 |
| * If we ever switch to a dynamic clock then this code might be useful |
| * |
| * unsigned int ctrlclkperiod_us; |
| * ctrlclkperiod_us = 96000000 / 1000000; |
| * ctrlclkperiod_us = 1000000 / ctrlclkperiod_us; |
| * ctx_dbg(1, ctx, "ctrlclkperiod_us: %d\n", ctrlclkperiod_us); |
| |
| * ths_settle = 176300 / ctrlclkperiod_us; |
| * ths_settle = (ths_settle > 1) ? ths_settle - 1 : ths_settle; |
| */ |
| |
| ths_settle = THS_SETTLE; |
| ctx_dbg(1, ctx, "ths_settle: %d (0x%02x)\n", ths_settle, ths_settle); |
| |
| reg0 = reg_read(ctx->cc, CAL_CSI2_PHY_REG0); |
| set_field(®0, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE, |
| CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK); |
| set_field(®0, ths_term, CAL_CSI2_PHY_REG0_THS_TERM_MASK); |
| set_field(®0, ths_settle, CAL_CSI2_PHY_REG0_THS_SETTLE_MASK); |
| |
| ctx_dbg(1, ctx, "CSI2_%d_REG0 = 0x%08x\n", (ctx->csi2_port - 1), reg0); |
| reg_write(ctx->cc, CAL_CSI2_PHY_REG0, reg0); |
| |
| reg1 = reg_read(ctx->cc, CAL_CSI2_PHY_REG1); |
| set_field(®1, TCLK_TERM, CAL_CSI2_PHY_REG1_TCLK_TERM_MASK); |
| set_field(®1, 0xb8, CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK); |
| set_field(®1, TCLK_MISS, CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK); |
| set_field(®1, TCLK_SETTLE, CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK); |
| |
| ctx_dbg(1, ctx, "CSI2_%d_REG1 = 0x%08x\n", (ctx->csi2_port - 1), reg1); |
| reg_write(ctx->cc, CAL_CSI2_PHY_REG1, reg1); |
| } |
| |
| static int cal_get_external_info(struct cal_ctx *ctx) |
| { |
| struct v4l2_ctrl *ctrl; |
| |
| if (!ctx->sensor) |
| return -ENODEV; |
| |
| ctrl = v4l2_ctrl_find(ctx->sensor->ctrl_handler, V4L2_CID_PIXEL_RATE); |
| if (!ctrl) { |
| ctx_err(ctx, "no pixel rate control in subdev: %s\n", |
| ctx->sensor->name); |
| return -EPIPE; |
| } |
| |
| ctx->external_rate = v4l2_ctrl_g_ctrl_int64(ctrl); |
| ctx_dbg(3, ctx, "sensor Pixel Rate: %d\n", ctx->external_rate); |
| |
| return 0; |
| } |
| |
| static inline void cal_schedule_next_buffer(struct cal_ctx *ctx) |
| { |
| struct cal_dmaqueue *dma_q = &ctx->vidq; |
| struct cal_buffer *buf; |
| unsigned long addr; |
| |
| buf = list_entry(dma_q->active.next, struct cal_buffer, list); |
| ctx->next_frm = buf; |
| list_del(&buf->list); |
| |
| addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); |
| cal_wr_dma_addr(ctx, addr); |
| } |
| |
| static inline void cal_process_buffer_complete(struct cal_ctx *ctx) |
| { |
| ctx->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns(); |
| ctx->cur_frm->vb.field = ctx->m_fmt.field; |
| ctx->cur_frm->vb.sequence = ctx->sequence++; |
| |
| vb2_buffer_done(&ctx->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE); |
| ctx->cur_frm = ctx->next_frm; |
| } |
| |
| #define isvcirqset(irq, vc, ff) (irq & \ |
| (CAL_CSI2_VC_IRQENABLE_ ##ff ##_IRQ_##vc ##_MASK)) |
| |
| #define isportirqset(irq, port) (irq & CAL_HL_IRQ_MASK(port)) |
| |
| static irqreturn_t cal_irq(int irq_cal, void *data) |
| { |
| struct cal_dev *dev = (struct cal_dev *)data; |
| struct cal_ctx *ctx; |
| struct cal_dmaqueue *dma_q; |
| u32 irqst2, irqst3; |
| |
| /* Check which DMA just finished */ |
| irqst2 = reg_read(dev, CAL_HL_IRQSTATUS(2)); |
| if (irqst2) { |
| /* Clear Interrupt status */ |
| reg_write(dev, CAL_HL_IRQSTATUS(2), irqst2); |
| |
| /* Need to check both port */ |
| if (isportirqset(irqst2, 1)) { |
| ctx = dev->ctx[0]; |
| |
| if (ctx->cur_frm != ctx->next_frm) |
| cal_process_buffer_complete(ctx); |
| } |
| |
| if (isportirqset(irqst2, 2)) { |
| ctx = dev->ctx[1]; |
| |
| if (ctx->cur_frm != ctx->next_frm) |
| cal_process_buffer_complete(ctx); |
| } |
| } |
| |
| /* Check which DMA just started */ |
| irqst3 = reg_read(dev, CAL_HL_IRQSTATUS(3)); |
| if (irqst3) { |
| /* Clear Interrupt status */ |
| reg_write(dev, CAL_HL_IRQSTATUS(3), irqst3); |
| |
| /* Need to check both port */ |
| if (isportirqset(irqst3, 1)) { |
| ctx = dev->ctx[0]; |
| dma_q = &ctx->vidq; |
| |
| spin_lock(&ctx->slock); |
| if (!list_empty(&dma_q->active) && |
| ctx->cur_frm == ctx->next_frm) |
| cal_schedule_next_buffer(ctx); |
| spin_unlock(&ctx->slock); |
| } |
| |
| if (isportirqset(irqst3, 2)) { |
| ctx = dev->ctx[1]; |
| dma_q = &ctx->vidq; |
| |
| spin_lock(&ctx->slock); |
| if (!list_empty(&dma_q->active) && |
| ctx->cur_frm == ctx->next_frm) |
| cal_schedule_next_buffer(ctx); |
| spin_unlock(&ctx->slock); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * video ioctls |
| */ |
| static int cal_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct cal_ctx *ctx = video_drvdata(file); |
| |
| strlcpy(cap->driver, CAL_MODULE_NAME, sizeof(cap->driver)); |
| strlcpy(cap->card, CAL_MODULE_NAME, sizeof(cap->card)); |
| |
| snprintf(cap->bus_info, sizeof(cap->bus_info), |
| "platform:%s", ctx->v4l2_dev.name); |
| cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | |
| V4L2_CAP_READWRITE; |
| cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; |
| return 0; |
| } |
| |
| static int cal_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| struct cal_ctx *ctx = video_drvdata(file); |
| const struct cal_fmt *fmt = NULL; |
| |
| if (f->index >= ctx->num_active_fmt) |
| return -EINVAL; |
| |
| fmt = ctx->active_fmt[f->index]; |
| |
| f->pixelformat = fmt->fourcc; |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| return 0; |
| } |
| |
| static int __subdev_get_format(struct cal_ctx *ctx, |
| struct v4l2_mbus_framefmt *fmt) |
| { |
| struct v4l2_subdev_format sd_fmt; |
| struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format; |
| int ret; |
| |
| sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; |
| sd_fmt.pad = 0; |
| |
| ret = v4l2_subdev_call(ctx->sensor, pad, get_fmt, NULL, &sd_fmt); |
| if (ret) |
| return ret; |
| |
| *fmt = *mbus_fmt; |
| |
| ctx_dbg(1, ctx, "%s %dx%d code:%04X\n", __func__, |
| fmt->width, fmt->height, fmt->code); |
| |
| return 0; |
| } |
| |
| static int __subdev_set_format(struct cal_ctx *ctx, |
| struct v4l2_mbus_framefmt *fmt) |
| { |
| struct v4l2_subdev_format sd_fmt; |
| struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format; |
| int ret; |
| |
| sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; |
| sd_fmt.pad = 0; |
| *mbus_fmt = *fmt; |
| |
| ret = v4l2_subdev_call(ctx->sensor, pad, set_fmt, NULL, &sd_fmt); |
| if (ret) |
| return ret; |
| |
| ctx_dbg(1, ctx, "%s %dx%d code:%04X\n", __func__, |
| fmt->width, fmt->height, fmt->code); |
| |
| return 0; |
| } |
| |
| static int cal_calc_format_size(struct cal_ctx *ctx, |
| const struct cal_fmt *fmt, |
| struct v4l2_format *f) |
| { |
| if (!fmt) { |
| ctx_dbg(3, ctx, "No cal_fmt provided!\n"); |
| return -EINVAL; |
| } |
| |
| v4l_bound_align_image(&f->fmt.pix.width, 48, MAX_WIDTH, 2, |
| &f->fmt.pix.height, 32, MAX_HEIGHT, 0, 0); |
| f->fmt.pix.bytesperline = bytes_per_line(f->fmt.pix.width, |
| fmt->depth >> 3); |
| f->fmt.pix.sizeimage = f->fmt.pix.height * |
| f->fmt.pix.bytesperline; |
| |
| ctx_dbg(3, ctx, "%s: fourcc: %s size: %dx%d bpl:%d img_size:%d\n", |
| __func__, fourcc_to_str(f->fmt.pix.pixelformat), |
| f->fmt.pix.width, f->fmt.pix.height, |
| f->fmt.pix.bytesperline, f->fmt.pix.sizeimage); |
| |
| return 0; |
| } |
| |
| static int cal_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cal_ctx *ctx = video_drvdata(file); |
| |
| *f = ctx->v_fmt; |
| |
| return 0; |
| } |
| |
| static int cal_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cal_ctx *ctx = video_drvdata(file); |
| const struct cal_fmt *fmt; |
| struct v4l2_subdev_frame_size_enum fse; |
| int ret, found; |
| |
| fmt = find_format_by_pix(ctx, f->fmt.pix.pixelformat); |
| if (!fmt) { |
| ctx_dbg(3, ctx, "Fourcc format (0x%08x) not found.\n", |
| f->fmt.pix.pixelformat); |
| |
| /* Just get the first one enumerated */ |
| fmt = ctx->active_fmt[0]; |
| f->fmt.pix.pixelformat = fmt->fourcc; |
| } |
| |
| f->fmt.pix.field = ctx->v_fmt.fmt.pix.field; |
| |
| /* check for/find a valid width/height */ |
| ret = 0; |
| found = false; |
| fse.pad = 0; |
| fse.code = fmt->code; |
| fse.which = V4L2_SUBDEV_FORMAT_ACTIVE; |
| for (fse.index = 0; ; fse.index++) { |
| ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size, |
| NULL, &fse); |
| if (ret) |
| break; |
| |
| if ((f->fmt.pix.width == fse.max_width) && |
| (f->fmt.pix.height == fse.max_height)) { |
| found = true; |
| break; |
| } else if ((f->fmt.pix.width >= fse.min_width) && |
| (f->fmt.pix.width <= fse.max_width) && |
| (f->fmt.pix.height >= fse.min_height) && |
| (f->fmt.pix.height <= fse.max_height)) { |
| found = true; |
| break; |
| } |
| } |
| |
| if (!found) { |
| /* use existing values as default */ |
| f->fmt.pix.width = ctx->v_fmt.fmt.pix.width; |
| f->fmt.pix.height = ctx->v_fmt.fmt.pix.height; |
| } |
| |
| /* |
| * Use current colorspace for now, it will get |
| * updated properly during s_fmt |
| */ |
| f->fmt.pix.colorspace = ctx->v_fmt.fmt.pix.colorspace; |
| return cal_calc_format_size(ctx, fmt, f); |
| } |
| |
| static int cal_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cal_ctx *ctx = video_drvdata(file); |
| struct vb2_queue *q = &ctx->vb_vidq; |
| const struct cal_fmt *fmt; |
| struct v4l2_mbus_framefmt mbus_fmt; |
| int ret; |
| |
| if (vb2_is_busy(q)) { |
| ctx_dbg(3, ctx, "%s device busy\n", __func__); |
| return -EBUSY; |
| } |
| |
| ret = cal_try_fmt_vid_cap(file, priv, f); |
| if (ret < 0) |
| return ret; |
| |
| fmt = find_format_by_pix(ctx, f->fmt.pix.pixelformat); |
| |
| v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code); |
| |
| ret = __subdev_set_format(ctx, &mbus_fmt); |
| if (ret) |
| return ret; |
| |
| /* Just double check nothing has gone wrong */ |
| if (mbus_fmt.code != fmt->code) { |
| ctx_dbg(3, ctx, |
| "%s subdev changed format on us, this should not happen\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| v4l2_fill_pix_format(&ctx->v_fmt.fmt.pix, &mbus_fmt); |
| ctx->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| ctx->v_fmt.fmt.pix.pixelformat = fmt->fourcc; |
| cal_calc_format_size(ctx, fmt, &ctx->v_fmt); |
| ctx->fmt = fmt; |
| ctx->m_fmt = mbus_fmt; |
| *f = ctx->v_fmt; |
| |
| return 0; |
| } |
| |
| static int cal_enum_framesizes(struct file *file, void *fh, |
| struct v4l2_frmsizeenum *fsize) |
| { |
| struct cal_ctx *ctx = video_drvdata(file); |
| const struct cal_fmt *fmt; |
| struct v4l2_subdev_frame_size_enum fse; |
| int ret; |
| |
| /* check for valid format */ |
| fmt = find_format_by_pix(ctx, fsize->pixel_format); |
| if (!fmt) { |
| ctx_dbg(3, ctx, "Invalid pixel code: %x\n", |
| fsize->pixel_format); |
| return -EINVAL; |
| } |
| |
| fse.index = fsize->index; |
| fse.pad = 0; |
| fse.code = fmt->code; |
| |
| ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size, NULL, &fse); |
| if (ret) |
| return ret; |
| |
| ctx_dbg(1, ctx, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n", |
| __func__, fse.index, fse.code, fse.min_width, fse.max_width, |
| fse.min_height, fse.max_height); |
| |
| fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; |
| fsize->discrete.width = fse.max_width; |
| fsize->discrete.height = fse.max_height; |
| |
| return 0; |
| } |
| |
| static int cal_enum_input(struct file *file, void *priv, |
| struct v4l2_input *inp) |
| { |
| if (inp->index >= CAL_NUM_INPUT) |
| return -EINVAL; |
| |
| inp->type = V4L2_INPUT_TYPE_CAMERA; |
| sprintf(inp->name, "Camera %u", inp->index); |
| return 0; |
| } |
| |
| static int cal_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| struct cal_ctx *ctx = video_drvdata(file); |
| |
| *i = ctx->input; |
| return 0; |
| } |
| |
| static int cal_s_input(struct file *file, void *priv, unsigned int i) |
| { |
| struct cal_ctx *ctx = video_drvdata(file); |
| |
| if (i >= CAL_NUM_INPUT) |
| return -EINVAL; |
| |
| ctx->input = i; |
| return 0; |
| } |
| |
| /* timeperframe is arbitrary and continuous */ |
| static int cal_enum_frameintervals(struct file *file, void *priv, |
| struct v4l2_frmivalenum *fival) |
| { |
| struct cal_ctx *ctx = video_drvdata(file); |
| const struct cal_fmt *fmt; |
| struct v4l2_subdev_frame_interval_enum fie = { |
| .index = fival->index, |
| .width = fival->width, |
| .height = fival->height, |
| .which = V4L2_SUBDEV_FORMAT_ACTIVE, |
| }; |
| int ret; |
| |
| fmt = find_format_by_pix(ctx, fival->pixel_format); |
| if (!fmt) |
| return -EINVAL; |
| |
| fie.code = fmt->code; |
| ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_interval, |
| NULL, &fie); |
| if (ret) |
| return ret; |
| fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; |
| fival->discrete = fie.interval; |
| |
| return 0; |
| } |
| |
| /* |
| * Videobuf operations |
| */ |
| static int cal_queue_setup(struct vb2_queue *vq, |
| unsigned int *nbuffers, unsigned int *nplanes, |
| unsigned int sizes[], struct device *alloc_devs[]) |
| { |
| struct cal_ctx *ctx = vb2_get_drv_priv(vq); |
| unsigned size = ctx->v_fmt.fmt.pix.sizeimage; |
| |
| if (vq->num_buffers + *nbuffers < 3) |
| *nbuffers = 3 - vq->num_buffers; |
| |
| if (*nplanes) { |
| if (sizes[0] < size) |
| return -EINVAL; |
| size = sizes[0]; |
| } |
| |
| *nplanes = 1; |
| sizes[0] = size; |
| |
| ctx_dbg(3, ctx, "nbuffers=%d, size=%d\n", *nbuffers, sizes[0]); |
| |
| return 0; |
| } |
| |
| static int cal_buffer_prepare(struct vb2_buffer *vb) |
| { |
| struct cal_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); |
| struct cal_buffer *buf = container_of(vb, struct cal_buffer, |
| vb.vb2_buf); |
| unsigned long size; |
| |
| if (WARN_ON(!ctx->fmt)) |
| return -EINVAL; |
| |
| size = ctx->v_fmt.fmt.pix.sizeimage; |
| if (vb2_plane_size(vb, 0) < size) { |
| ctx_err(ctx, |
| "data will not fit into plane (%lu < %lu)\n", |
| vb2_plane_size(vb, 0), size); |
| return -EINVAL; |
| } |
| |
| vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size); |
| return 0; |
| } |
| |
| static void cal_buffer_queue(struct vb2_buffer *vb) |
| { |
| struct cal_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); |
| struct cal_buffer *buf = container_of(vb, struct cal_buffer, |
| vb.vb2_buf); |
| struct cal_dmaqueue *vidq = &ctx->vidq; |
| unsigned long flags = 0; |
| |
| /* recheck locking */ |
| spin_lock_irqsave(&ctx->slock, flags); |
| list_add_tail(&buf->list, &vidq->active); |
| spin_unlock_irqrestore(&ctx->slock, flags); |
| } |
| |
| static int cal_start_streaming(struct vb2_queue *vq, unsigned int count) |
| { |
| struct cal_ctx *ctx = vb2_get_drv_priv(vq); |
| struct cal_dmaqueue *dma_q = &ctx->vidq; |
| struct cal_buffer *buf, *tmp; |
| unsigned long addr = 0; |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&ctx->slock, flags); |
| if (list_empty(&dma_q->active)) { |
| spin_unlock_irqrestore(&ctx->slock, flags); |
| ctx_dbg(3, ctx, "buffer queue is empty\n"); |
| return -EIO; |
| } |
| |
| buf = list_entry(dma_q->active.next, struct cal_buffer, list); |
| ctx->cur_frm = buf; |
| ctx->next_frm = buf; |
| list_del(&buf->list); |
| spin_unlock_irqrestore(&ctx->slock, flags); |
| |
| addr = vb2_dma_contig_plane_dma_addr(&ctx->cur_frm->vb.vb2_buf, 0); |
| ctx->sequence = 0; |
| |
| ret = cal_get_external_info(ctx); |
| if (ret < 0) |
| goto err; |
| |
| cal_runtime_get(ctx->dev); |
| |
| enable_irqs(ctx); |
| camerarx_phy_enable(ctx); |
| csi2_init(ctx); |
| csi2_phy_config(ctx); |
| csi2_lane_config(ctx); |
| csi2_ctx_config(ctx); |
| pix_proc_config(ctx); |
| cal_wr_dma_config(ctx, ctx->v_fmt.fmt.pix.bytesperline); |
| cal_wr_dma_addr(ctx, addr); |
| csi2_ppi_enable(ctx); |
| |
| ret = v4l2_subdev_call(ctx->sensor, video, s_stream, 1); |
| if (ret) { |
| ctx_err(ctx, "stream on failed in subdev\n"); |
| cal_runtime_put(ctx->dev); |
| goto err; |
| } |
| |
| if (debug >= 4) |
| cal_quickdump_regs(ctx->dev); |
| |
| return 0; |
| |
| err: |
| list_for_each_entry_safe(buf, tmp, &dma_q->active, list) { |
| list_del(&buf->list); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); |
| } |
| return ret; |
| } |
| |
| static void cal_stop_streaming(struct vb2_queue *vq) |
| { |
| struct cal_ctx *ctx = vb2_get_drv_priv(vq); |
| struct cal_dmaqueue *dma_q = &ctx->vidq; |
| struct cal_buffer *buf, *tmp; |
| unsigned long flags; |
| |
| if (v4l2_subdev_call(ctx->sensor, video, s_stream, 0)) |
| ctx_err(ctx, "stream off failed in subdev\n"); |
| |
| csi2_ppi_disable(ctx); |
| disable_irqs(ctx); |
| |
| /* Release all active buffers */ |
| spin_lock_irqsave(&ctx->slock, flags); |
| list_for_each_entry_safe(buf, tmp, &dma_q->active, list) { |
| list_del(&buf->list); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); |
| } |
| |
| if (ctx->cur_frm == ctx->next_frm) { |
| vb2_buffer_done(&ctx->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); |
| } else { |
| vb2_buffer_done(&ctx->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); |
| vb2_buffer_done(&ctx->next_frm->vb.vb2_buf, |
| VB2_BUF_STATE_ERROR); |
| } |
| ctx->cur_frm = NULL; |
| ctx->next_frm = NULL; |
| spin_unlock_irqrestore(&ctx->slock, flags); |
| |
| cal_runtime_put(ctx->dev); |
| } |
| |
| static const struct vb2_ops cal_video_qops = { |
| .queue_setup = cal_queue_setup, |
| .buf_prepare = cal_buffer_prepare, |
| .buf_queue = cal_buffer_queue, |
| .start_streaming = cal_start_streaming, |
| .stop_streaming = cal_stop_streaming, |
| .wait_prepare = vb2_ops_wait_prepare, |
| .wait_finish = vb2_ops_wait_finish, |
| }; |
| |
| static const struct v4l2_file_operations cal_fops = { |
| .owner = THIS_MODULE, |
| .open = v4l2_fh_open, |
| .release = vb2_fop_release, |
| .read = vb2_fop_read, |
| .poll = vb2_fop_poll, |
| .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ |
| .mmap = vb2_fop_mmap, |
| }; |
| |
| static const struct v4l2_ioctl_ops cal_ioctl_ops = { |
| .vidioc_querycap = cal_querycap, |
| .vidioc_enum_fmt_vid_cap = cal_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = cal_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = cal_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = cal_s_fmt_vid_cap, |
| .vidioc_enum_framesizes = cal_enum_framesizes, |
| .vidioc_reqbufs = vb2_ioctl_reqbufs, |
| .vidioc_create_bufs = vb2_ioctl_create_bufs, |
| .vidioc_prepare_buf = vb2_ioctl_prepare_buf, |
| .vidioc_querybuf = vb2_ioctl_querybuf, |
| .vidioc_qbuf = vb2_ioctl_qbuf, |
| .vidioc_dqbuf = vb2_ioctl_dqbuf, |
| .vidioc_enum_input = cal_enum_input, |
| .vidioc_g_input = cal_g_input, |
| .vidioc_s_input = cal_s_input, |
| .vidioc_enum_frameintervals = cal_enum_frameintervals, |
| .vidioc_streamon = vb2_ioctl_streamon, |
| .vidioc_streamoff = vb2_ioctl_streamoff, |
| .vidioc_log_status = v4l2_ctrl_log_status, |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| }; |
| |
| static struct video_device cal_videodev = { |
| .name = CAL_MODULE_NAME, |
| .fops = &cal_fops, |
| .ioctl_ops = &cal_ioctl_ops, |
| .minor = -1, |
| .release = video_device_release_empty, |
| }; |
| |
| /* ----------------------------------------------------------------- |
| * Initialization and module stuff |
| * ------------------------------------------------------------------ |
| */ |
| static int cal_complete_ctx(struct cal_ctx *ctx); |
| |
| static int cal_async_bound(struct v4l2_async_notifier *notifier, |
| struct v4l2_subdev *subdev, |
| struct v4l2_async_subdev *asd) |
| { |
| struct cal_ctx *ctx = notifier_to_ctx(notifier); |
| struct v4l2_subdev_mbus_code_enum mbus_code; |
| int ret = 0; |
| int i, j, k; |
| |
| if (ctx->sensor) { |
| ctx_info(ctx, "Rejecting subdev %s (Already set!!)", |
| subdev->name); |
| return 0; |
| } |
| |
| ctx->sensor = subdev; |
| ctx_dbg(1, ctx, "Using sensor %s for capture\n", subdev->name); |
| |
| /* Enumerate sub device formats and enable all matching local formats */ |
| ctx->num_active_fmt = 0; |
| for (j = 0, i = 0; ret != -EINVAL; ++j) { |
| struct cal_fmt *fmt; |
| |
| memset(&mbus_code, 0, sizeof(mbus_code)); |
| mbus_code.index = j; |
| ret = v4l2_subdev_call(subdev, pad, enum_mbus_code, |
| NULL, &mbus_code); |
| if (ret) |
| continue; |
| |
| ctx_dbg(2, ctx, |
| "subdev %s: code: %04x idx: %d\n", |
| subdev->name, mbus_code.code, j); |
| |
| for (k = 0; k < ARRAY_SIZE(cal_formats); k++) { |
| fmt = &cal_formats[k]; |
| |
| if (mbus_code.code == fmt->code) { |
| ctx->active_fmt[i] = fmt; |
| ctx_dbg(2, ctx, |
| "matched fourcc: %s: code: %04x idx: %d\n", |
| fourcc_to_str(fmt->fourcc), |
| fmt->code, i); |
| ctx->num_active_fmt = ++i; |
| } |
| } |
| } |
| |
| if (i == 0) { |
| ctx_err(ctx, "No suitable format reported by subdev %s\n", |
| subdev->name); |
| return -EINVAL; |
| } |
| |
| cal_complete_ctx(ctx); |
| |
| return 0; |
| } |
| |
| static int cal_async_complete(struct v4l2_async_notifier *notifier) |
| { |
| struct cal_ctx *ctx = notifier_to_ctx(notifier); |
| const struct cal_fmt *fmt; |
| struct v4l2_mbus_framefmt mbus_fmt; |
| int ret; |
| |
| ret = __subdev_get_format(ctx, &mbus_fmt); |
| if (ret) |
| return ret; |
| |
| fmt = find_format_by_code(ctx, mbus_fmt.code); |
| if (!fmt) { |
| ctx_dbg(3, ctx, "mbus code format (0x%08x) not found.\n", |
| mbus_fmt.code); |
| return -EINVAL; |
| } |
| |
| /* Save current subdev format */ |
| v4l2_fill_pix_format(&ctx->v_fmt.fmt.pix, &mbus_fmt); |
| ctx->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| ctx->v_fmt.fmt.pix.pixelformat = fmt->fourcc; |
| cal_calc_format_size(ctx, fmt, &ctx->v_fmt); |
| ctx->fmt = fmt; |
| ctx->m_fmt = mbus_fmt; |
| |
| return 0; |
| } |
| |
| static int cal_complete_ctx(struct cal_ctx *ctx) |
| { |
| struct video_device *vfd; |
| struct vb2_queue *q; |
| int ret; |
| |
| ctx->timeperframe = tpf_default; |
| ctx->external_rate = 192000000; |
| |
| /* initialize locks */ |
| spin_lock_init(&ctx->slock); |
| mutex_init(&ctx->mutex); |
| |
| /* initialize queue */ |
| q = &ctx->vb_vidq; |
| q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ; |
| q->drv_priv = ctx; |
| q->buf_struct_size = sizeof(struct cal_buffer); |
| q->ops = &cal_video_qops; |
| q->mem_ops = &vb2_dma_contig_memops; |
| q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| q->lock = &ctx->mutex; |
| q->min_buffers_needed = 3; |
| q->dev = ctx->v4l2_dev.dev; |
| |
| ret = vb2_queue_init(q); |
| if (ret) |
| return ret; |
| |
| /* init video dma queues */ |
| INIT_LIST_HEAD(&ctx->vidq.active); |
| |
| vfd = &ctx->vdev; |
| *vfd = cal_videodev; |
| vfd->v4l2_dev = &ctx->v4l2_dev; |
| vfd->queue = q; |
| |
| /* |
| * Provide a mutex to v4l2 core. It will be used to protect |
| * all fops and v4l2 ioctls. |
| */ |
| vfd->lock = &ctx->mutex; |
| video_set_drvdata(vfd, ctx); |
| |
| ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); |
| if (ret < 0) |
| return ret; |
| |
| v4l2_info(&ctx->v4l2_dev, "V4L2 device registered as %s\n", |
| video_device_node_name(vfd)); |
| |
| return 0; |
| } |
| |
| static struct device_node * |
| of_get_next_port(const struct device_node *parent, |
| struct device_node *prev) |
| { |
| struct device_node *port = NULL; |
| |
| if (!parent) |
| return NULL; |
| |
| if (!prev) { |
| struct device_node *ports; |
| /* |
| * It's the first call, we have to find a port subnode |
| * within this node or within an optional 'ports' node. |
| */ |
| ports = of_get_child_by_name(parent, "ports"); |
| if (ports) |
| parent = ports; |
| |
| port = of_get_child_by_name(parent, "port"); |
| |
| /* release the 'ports' node */ |
| of_node_put(ports); |
| } else { |
| struct device_node *ports; |
| |
| ports = of_get_parent(prev); |
| if (!ports) |
| return NULL; |
| |
| do { |
| port = of_get_next_child(ports, prev); |
| if (!port) { |
| of_node_put(ports); |
| return NULL; |
| } |
| prev = port; |
| } while (of_node_cmp(port->name, "port") != 0); |
| } |
| |
| return port; |
| } |
| |
| static struct device_node * |
| of_get_next_endpoint(const struct device_node *parent, |
| struct device_node *prev) |
| { |
| struct device_node *ep = NULL; |
| |
| if (!parent) |
| return NULL; |
| |
| do { |
| ep = of_get_next_child(parent, prev); |
| if (!ep) |
| return NULL; |
| prev = ep; |
| } while (of_node_cmp(ep->name, "endpoint") != 0); |
| |
| return ep; |
| } |
| |
| static int of_cal_create_instance(struct cal_ctx *ctx, int inst) |
| { |
| struct platform_device *pdev = ctx->dev->pdev; |
| struct device_node *ep_node, *port, *remote_ep, |
| *sensor_node, *parent; |
| struct v4l2_of_endpoint *endpoint; |
| struct v4l2_async_subdev *asd; |
| u32 regval = 0; |
| int ret, index, found_port = 0, lane; |
| |
| parent = pdev->dev.of_node; |
| |
| asd = &ctx->asd; |
| endpoint = &ctx->endpoint; |
| |
| ep_node = NULL; |
| port = NULL; |
| remote_ep = NULL; |
| sensor_node = NULL; |
| ret = -EINVAL; |
| |
| ctx_dbg(3, ctx, "Scanning Port node for csi2 port: %d\n", inst); |
| for (index = 0; index < CAL_NUM_CSI2_PORTS; index++) { |
| port = of_get_next_port(parent, port); |
| if (!port) { |
| ctx_dbg(1, ctx, "No port node found for csi2 port:%d\n", |
| index); |
| goto cleanup_exit; |
| } |
| |
| /* Match the slice number with <REG> */ |
| of_property_read_u32(port, "reg", ®val); |
| ctx_dbg(3, ctx, "port:%d inst:%d <reg>:%d\n", |
| index, inst, regval); |
| if ((regval == inst) && (index == inst)) { |
| found_port = 1; |
| break; |
| } |
| } |
| |
| if (!found_port) { |
| ctx_dbg(1, ctx, "No port node matches csi2 port:%d\n", |
| inst); |
| goto cleanup_exit; |
| } |
| |
| ctx_dbg(3, ctx, "Scanning sub-device for csi2 port: %d\n", |
| inst); |
| |
| ep_node = of_get_next_endpoint(port, ep_node); |
| if (!ep_node) { |
| ctx_dbg(3, ctx, "can't get next endpoint\n"); |
| goto cleanup_exit; |
| } |
| |
| sensor_node = of_graph_get_remote_port_parent(ep_node); |
| if (!sensor_node) { |
| ctx_dbg(3, ctx, "can't get remote parent\n"); |
| goto cleanup_exit; |
| } |
| asd->match_type = V4L2_ASYNC_MATCH_OF; |
| asd->match.of.node = sensor_node; |
| |
| remote_ep = of_parse_phandle(ep_node, "remote-endpoint", 0); |
| if (!remote_ep) { |
| ctx_dbg(3, ctx, "can't get remote-endpoint\n"); |
| goto cleanup_exit; |
| } |
| v4l2_of_parse_endpoint(remote_ep, endpoint); |
| |
| if (endpoint->bus_type != V4L2_MBUS_CSI2) { |
| ctx_err(ctx, "Port:%d sub-device %s is not a CSI2 device\n", |
| inst, sensor_node->name); |
| goto cleanup_exit; |
| } |
| |
| /* Store Virtual Channel number */ |
| ctx->virtual_channel = endpoint->base.id; |
| |
| ctx_dbg(3, ctx, "Port:%d v4l2-endpoint: CSI2\n", inst); |
| ctx_dbg(3, ctx, "Virtual Channel=%d\n", ctx->virtual_channel); |
| ctx_dbg(3, ctx, "flags=0x%08x\n", endpoint->bus.mipi_csi2.flags); |
| ctx_dbg(3, ctx, "clock_lane=%d\n", endpoint->bus.mipi_csi2.clock_lane); |
| ctx_dbg(3, ctx, "num_data_lanes=%d\n", |
| endpoint->bus.mipi_csi2.num_data_lanes); |
| ctx_dbg(3, ctx, "data_lanes= <\n"); |
| for (lane = 0; lane < endpoint->bus.mipi_csi2.num_data_lanes; lane++) |
| ctx_dbg(3, ctx, "\t%d\n", |
| endpoint->bus.mipi_csi2.data_lanes[lane]); |
| ctx_dbg(3, ctx, "\t>\n"); |
| |
| ctx_dbg(1, ctx, "Port: %d found sub-device %s\n", |
| inst, sensor_node->name); |
| |
| ctx->asd_list[0] = asd; |
| ctx->notifier.subdevs = ctx->asd_list; |
| ctx->notifier.num_subdevs = 1; |
| ctx->notifier.bound = cal_async_bound; |
| ctx->notifier.complete = cal_async_complete; |
| ret = v4l2_async_notifier_register(&ctx->v4l2_dev, |
| &ctx->notifier); |
| if (ret) { |
| ctx_err(ctx, "Error registering async notifier\n"); |
| ret = -EINVAL; |
| } |
| |
| cleanup_exit: |
| if (!remote_ep) |
| of_node_put(remote_ep); |
| if (!sensor_node) |
| of_node_put(sensor_node); |
| if (!ep_node) |
| of_node_put(ep_node); |
| if (!port) |
| of_node_put(port); |
| |
| return ret; |
| } |
| |
| static struct cal_ctx *cal_create_instance(struct cal_dev *dev, int inst) |
| { |
| struct cal_ctx *ctx; |
| struct v4l2_ctrl_handler *hdl; |
| int ret; |
| |
| ctx = devm_kzalloc(&dev->pdev->dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return NULL; |
| |
| /* save the cal_dev * for future ref */ |
| ctx->dev = dev; |
| |
| snprintf(ctx->v4l2_dev.name, sizeof(ctx->v4l2_dev.name), |
| "%s-%03d", CAL_MODULE_NAME, inst); |
| ret = v4l2_device_register(&dev->pdev->dev, &ctx->v4l2_dev); |
| if (ret) |
| goto err_exit; |
| |
| hdl = &ctx->ctrl_handler; |
| ret = v4l2_ctrl_handler_init(hdl, 11); |
| if (ret) { |
| ctx_err(ctx, "Failed to init ctrl handler\n"); |
| goto unreg_dev; |
| } |
| ctx->v4l2_dev.ctrl_handler = hdl; |
| |
| /* Make sure Camera Core H/W register area is available */ |
| ctx->cc = dev->cc[inst]; |
| |
| /* Store the instance id */ |
| ctx->csi2_port = inst + 1; |
| |
| ret = of_cal_create_instance(ctx, inst); |
| if (ret) { |
| ret = -EINVAL; |
| goto free_hdl; |
| } |
| return ctx; |
| |
| free_hdl: |
| v4l2_ctrl_handler_free(hdl); |
| unreg_dev: |
| v4l2_device_unregister(&ctx->v4l2_dev); |
| err_exit: |
| return NULL; |
| } |
| |
| static int cal_probe(struct platform_device *pdev) |
| { |
| struct cal_dev *dev; |
| int ret; |
| int irq; |
| |
| dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| |
| /* set pseudo v4l2 device name so we can use v4l2_printk */ |
| strlcpy(dev->v4l2_dev.name, CAL_MODULE_NAME, |
| sizeof(dev->v4l2_dev.name)); |
| |
| /* save pdev pointer */ |
| dev->pdev = pdev; |
| |
| dev->res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "cal_top"); |
| dev->base = devm_ioremap_resource(&pdev->dev, dev->res); |
| if (IS_ERR(dev->base)) |
| return PTR_ERR(dev->base); |
| |
| cal_dbg(1, dev, "ioresource %s at %pa - %pa\n", |
| dev->res->name, &dev->res->start, &dev->res->end); |
| |
| irq = platform_get_irq(pdev, 0); |
| cal_dbg(1, dev, "got irq# %d\n", irq); |
| ret = devm_request_irq(&pdev->dev, irq, cal_irq, 0, CAL_MODULE_NAME, |
| dev); |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, dev); |
| |
| dev->cm = cm_create(dev); |
| if (IS_ERR(dev->cm)) |
| return PTR_ERR(dev->cm); |
| |
| dev->cc[0] = cc_create(dev, 0); |
| if (IS_ERR(dev->cc[0])) |
| return PTR_ERR(dev->cc[0]); |
| |
| dev->cc[1] = cc_create(dev, 1); |
| if (IS_ERR(dev->cc[1])) |
| return PTR_ERR(dev->cc[1]); |
| |
| dev->ctx[0] = NULL; |
| dev->ctx[1] = NULL; |
| |
| dev->ctx[0] = cal_create_instance(dev, 0); |
| dev->ctx[1] = cal_create_instance(dev, 1); |
| if (!dev->ctx[0] && !dev->ctx[1]) { |
| cal_err(dev, "Neither port is configured, no point in staying up\n"); |
| return -ENODEV; |
| } |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| ret = cal_runtime_get(dev); |
| if (ret) |
| goto runtime_disable; |
| |
| /* Just check we can actually access the module */ |
| cal_get_hwinfo(dev); |
| |
| cal_runtime_put(dev); |
| |
| return 0; |
| |
| runtime_disable: |
| pm_runtime_disable(&pdev->dev); |
| return ret; |
| } |
| |
| static int cal_remove(struct platform_device *pdev) |
| { |
| struct cal_dev *dev = |
| (struct cal_dev *)platform_get_drvdata(pdev); |
| struct cal_ctx *ctx; |
| int i; |
| |
| cal_dbg(1, dev, "Removing %s\n", CAL_MODULE_NAME); |
| |
| cal_runtime_get(dev); |
| |
| for (i = 0; i < CAL_NUM_CONTEXT; i++) { |
| ctx = dev->ctx[i]; |
| if (ctx) { |
| ctx_dbg(1, ctx, "unregistering %s\n", |
| video_device_node_name(&ctx->vdev)); |
| camerarx_phy_disable(ctx); |
| v4l2_async_notifier_unregister(&ctx->notifier); |
| v4l2_ctrl_handler_free(&ctx->ctrl_handler); |
| v4l2_device_unregister(&ctx->v4l2_dev); |
| video_unregister_device(&ctx->vdev); |
| } |
| } |
| |
| cal_runtime_put(dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF) |
| static const struct of_device_id cal_of_match[] = { |
| { .compatible = "ti,dra72-cal", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, cal_of_match); |
| #endif |
| |
| static struct platform_driver cal_pdrv = { |
| .probe = cal_probe, |
| .remove = cal_remove, |
| .driver = { |
| .name = CAL_MODULE_NAME, |
| .of_match_table = of_match_ptr(cal_of_match), |
| }, |
| }; |
| |
| module_platform_driver(cal_pdrv); |