| * MELFAS MIP4 Touchscreen |
| |
| Required properties: |
| - compatible: must be "melfas,mip4_ts" |
| - reg: I2C slave address of the chip (0x48 or 0x34) |
| - interrupt-parent: interrupt controller to which the chip is connected |
| - interrupts: interrupt to which the chip is connected |
| |
| Optional properties: |
| - ce-gpios: GPIO connected to the CE (chip enable) pin of the chip |
| |
| Example: |
| i2c@00000000 { |
| touchscreen: melfas_mip4@48 { |
| compatible = "melfas,mip4_ts"; |
| reg = <0x48>; |
| interrupt-parent = <&gpio>; |
| interrupts = <0 IRQ_TYPE_EDGE_FALLING>; |
| ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
