drivers/media/dvb-frontends/dibx000_common.h - arm/linux - Git at Google

 #ifndef DIBX000_COMMON_H
 #define DIBX000_COMMON_H

 enum dibx000_i2c_interface {
 	DIBX000_I2C_INTERFACE_TUNER = 0,
 	DIBX000_I2C_INTERFACE_GPIO_1_2 = 1,
 	DIBX000_I2C_INTERFACE_GPIO_3_4 = 2,
 	DIBX000_I2C_INTERFACE_GPIO_6_7 = 3
 };

 struct dibx000_i2c_master {
 #define DIB3000MC 1
 #define DIB7000   2
 #define DIB7000P  11
 #define DIB7000MC 12
 #define DIB8000   13
 	u16 device_rev;

 	enum dibx000_i2c_interface selected_interface;

 /*	struct i2c_adapter  tuner_i2c_adap; */
 	struct i2c_adapter gated_tuner_i2c_adap;
 	struct i2c_adapter master_i2c_adap_gpio12;
 	struct i2c_adapter master_i2c_adap_gpio34;
 	struct i2c_adapter master_i2c_adap_gpio67;

 	struct i2c_adapter *i2c_adap;
 	u8 i2c_addr;

 	u16 base_reg;

 	/* for the I2C transfer */
 	struct i2c_msg msg[34];
 	u8 i2c_write_buffer[8];
 	u8 i2c_read_buffer[2];
 	struct mutex i2c_buffer_lock;
 };

 extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
 					u16 device_rev, struct i2c_adapter *i2c_adap,
 					u8 i2c_addr);
 extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master
 							*mst,
 							enum dibx000_i2c_interface
 							intf, int gating);
 extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
 extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst);
 extern int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed);

 #define BAND_LBAND 0x01
 #define BAND_UHF   0x02
 #define BAND_VHF   0x04
 #define BAND_SBAND 0x08
 #define BAND_FM	   0x10
 #define BAND_CBAND 0x20

 #define BAND_OF_FREQUENCY(freq_kHz) ((freq_kHz) <= 170000 ? BAND_CBAND : \
 									(freq_kHz) <= 115000 ? BAND_FM : \
 									(freq_kHz) <= 250000 ? BAND_VHF : \
 									(freq_kHz) <= 863000 ? BAND_UHF : \
 									(freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )

 struct dibx000_agc_config {
 	/* defines the capabilities of this AGC-setting - using the BAND_-defines */
 	u8 band_caps;

 	u16 setup;

 	u16 inv_gain;
 	u16 time_stabiliz;

 	u8 alpha_level;
 	u16 thlock;

 	u8 wbd_inv;
 	u16 wbd_ref;
 	u8 wbd_sel;
 	u8 wbd_alpha;

 	u16 agc1_max;
 	u16 agc1_min;
 	u16 agc2_max;
 	u16 agc2_min;

 	u8 agc1_pt1;
 	u8 agc1_pt2;
 	u8 agc1_pt3;

 	u8 agc1_slope1;
 	u8 agc1_slope2;

 	u8 agc2_pt1;
 	u8 agc2_pt2;

 	u8 agc2_slope1;
 	u8 agc2_slope2;

 	u8 alpha_mant;
 	u8 alpha_exp;

 	u8 beta_mant;
 	u8 beta_exp;

 	u8 perform_agc_softsplit;

 	struct {
 		u16 min;
 		u16 max;
 		u16 min_thres;
 		u16 max_thres;
 	} split;
 };

 struct dibx000_bandwidth_config {
 	u32 internal;
 	u32 sampling;

 	u8 pll_prediv;
 	u8 pll_ratio;
 	u8 pll_range;
 	u8 pll_reset;
 	u8 pll_bypass;

 	u8 enable_refdiv;
 	u8 bypclk_div;
 	u8 IO_CLK_en_core;
 	u8 ADClkSrc;
 	u8 modulo;

 	u16 sad_cfg;

 	u32 ifreq;
 	u32 timf;

 	u32 xtal_hz;
 };

 enum dibx000_adc_states {
 	DIBX000_SLOW_ADC_ON = 0,
 	DIBX000_SLOW_ADC_OFF,
 	DIBX000_ADC_ON,
 	DIBX000_ADC_OFF,
 	DIBX000_VBG_ENABLE,
 	DIBX000_VBG_DISABLE,
 };

 #define BANDWIDTH_TO_KHZ(v)	((v) / 1000)
 #define BANDWIDTH_TO_HZ(v)	((v) * 1000)

 /* Chip output mode. */
 #define OUTMODE_HIGH_Z              0
 #define OUTMODE_MPEG2_PAR_GATED_CLK 1
 #define OUTMODE_MPEG2_PAR_CONT_CLK  2
 #define OUTMODE_MPEG2_SERIAL        7
 #define OUTMODE_DIVERSITY           4
 #define OUTMODE_MPEG2_FIFO          5
 #define OUTMODE_ANALOG_ADC          6

 #define INPUT_MODE_OFF                0x11
 #define INPUT_MODE_DIVERSITY          0x12
 #define INPUT_MODE_MPEG               0x13

 enum frontend_tune_state {
 	CT_TUNER_START = 10,
 	CT_TUNER_STEP_0,
 	CT_TUNER_STEP_1,
 	CT_TUNER_STEP_2,
 	CT_TUNER_STEP_3,
 	CT_TUNER_STEP_4,
 	CT_TUNER_STEP_5,
 	CT_TUNER_STEP_6,
 	CT_TUNER_STEP_7,
 	CT_TUNER_STOP,

 	CT_AGC_START = 20,
 	CT_AGC_STEP_0,
 	CT_AGC_STEP_1,
 	CT_AGC_STEP_2,
 	CT_AGC_STEP_3,
 	CT_AGC_STEP_4,
 	CT_AGC_STOP,

 	CT_DEMOD_START = 30,
 	CT_DEMOD_STEP_1,
 	CT_DEMOD_STEP_2,
 	CT_DEMOD_STEP_3,
 	CT_DEMOD_STEP_4,
 	CT_DEMOD_STEP_5,
 	CT_DEMOD_STEP_6,
 	CT_DEMOD_STEP_7,
 	CT_DEMOD_STEP_8,
 	CT_DEMOD_STEP_9,
 	CT_DEMOD_STEP_10,
 	CT_DEMOD_STEP_11,
 	CT_DEMOD_SEARCH_NEXT = 51,
 	CT_DEMOD_STEP_LOCKED,
 	CT_DEMOD_STOP,

 	CT_DONE = 100,
 	CT_SHUTDOWN,

 };

 struct dvb_frontend_parametersContext {
 #define CHANNEL_STATUS_PARAMETERS_UNKNOWN   0x01
 #define CHANNEL_STATUS_PARAMETERS_SET       0x02
 	u8 status;
 	u32 tune_time_estimation[2];
 	s32 tps_available;
 	u16 tps[9];
 };

 #define FE_STATUS_TUNE_FAILED          0
 #define FE_STATUS_TUNE_TIMED_OUT      -1
 #define FE_STATUS_TUNE_TIME_TOO_SHORT -2
 #define FE_STATUS_TUNE_PENDING        -3
 #define FE_STATUS_STD_SUCCESS         -4
 #define FE_STATUS_FFT_SUCCESS         -5
 #define FE_STATUS_DEMOD_SUCCESS       -6
 #define FE_STATUS_LOCKED              -7
 #define FE_STATUS_DATA_LOCKED         -8

 #define FE_CALLBACK_TIME_NEVER 0xffffffff

 #define ABS(x) ((x < 0) ? (-x) : (x))

 #define DATA_BUS_ACCESS_MODE_8BIT                 0x01
 #define DATA_BUS_ACCESS_MODE_16BIT                0x02
 #define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10

 struct dibGPIOFunction {
 #define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1
 #define BOARD_GPIO_COMPONENT_DEMOD       2
 	u8 component;

 #define BOARD_GPIO_FUNCTION_BOARD_ON      1
 #define BOARD_GPIO_FUNCTION_BOARD_OFF     2
 #define BOARD_GPIO_FUNCTION_COMPONENT_ON  3
 #define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4
 #define BOARD_GPIO_FUNCTION_SUBBAND_PWM   5
 #define BOARD_GPIO_FUNCTION_SUBBAND_GPIO   6
 	u8 function;

 /* mask, direction and value are used specify which GPIO to change GPIO0
  * is LSB and possible GPIO31 is MSB.  The same bit-position as in the
  * mask is used for the direction and the value. Direction == 1 is OUT,
  * 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN
  * value has no meaning.
  *
  * In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be
  * used to do the PWM. Direction gives the PWModulator to be used.
  * Value gives the PWM value in device-dependent scale.
  */
 	u32 mask;
 	u32 direction;
 	u32 value;
 };

 #define MAX_NB_SUBBANDS   8
 struct dibSubbandSelection {
 	u8  size; /* Actual number of subbands. */
 	struct {
 		u16 f_mhz;
 		struct dibGPIOFunction gpio;
 	} subband[MAX_NB_SUBBANDS];
 };

 #define DEMOD_TIMF_SET    0x00
 #define DEMOD_TIMF_GET    0x01
 #define DEMOD_TIMF_UPDATE 0x02

 #define MPEG_ON_DIBTX		1
 #define DIV_ON_DIBTX		2
 #define ADC_ON_DIBTX		3
 #define DEMOUT_ON_HOSTBUS	4
 #define DIBTX_ON_HOSTBUS	5
 #define MPEG_ON_HOSTBUS		6

 #endif
	#ifndef DIBX000_COMMON_H
	#define DIBX000_COMMON_H

	enum dibx000_i2c_interface {
	DIBX000_I2C_INTERFACE_TUNER = 0,
	DIBX000_I2C_INTERFACE_GPIO_1_2 = 1,
	DIBX000_I2C_INTERFACE_GPIO_3_4 = 2,
	DIBX000_I2C_INTERFACE_GPIO_6_7 = 3
	};

	struct dibx000_i2c_master {
	#define DIB3000MC 1
	#define DIB7000 2
	#define DIB7000P 11
	#define DIB7000MC 12
	#define DIB8000 13
	u16 device_rev;

	enum dibx000_i2c_interface selected_interface;

	/* struct i2c_adapter tuner_i2c_adap; */
	struct i2c_adapter gated_tuner_i2c_adap;
	struct i2c_adapter master_i2c_adap_gpio12;
	struct i2c_adapter master_i2c_adap_gpio34;
	struct i2c_adapter master_i2c_adap_gpio67;

	struct i2c_adapter *i2c_adap;
	u8 i2c_addr;

	u16 base_reg;

	/* for the I2C transfer */
	struct i2c_msg msg[34];
	u8 i2c_write_buffer[8];
	u8 i2c_read_buffer[2];
	struct mutex i2c_buffer_lock;
	};

	extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
	u16 device_rev, struct i2c_adapter *i2c_adap,
	u8 i2c_addr);
	extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master
	*mst,
	enum dibx000_i2c_interface
	intf, int gating);
	extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
	extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst);
	extern int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed);

	#define BAND_LBAND 0x01
	#define BAND_UHF 0x02
	#define BAND_VHF 0x04
	#define BAND_SBAND 0x08
	#define BAND_FM 0x10
	#define BAND_CBAND 0x20

	#define BAND_OF_FREQUENCY(freq_kHz) ((freq_kHz) <= 170000 ? BAND_CBAND : \
	(freq_kHz) <= 115000 ? BAND_FM : \
	(freq_kHz) <= 250000 ? BAND_VHF : \
	(freq_kHz) <= 863000 ? BAND_UHF : \
	(freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )

	struct dibx000_agc_config {
	/* defines the capabilities of this AGC-setting - using the BAND_-defines */
	u8 band_caps;

	u16 setup;

	u16 inv_gain;
	u16 time_stabiliz;

	u8 alpha_level;
	u16 thlock;

	u8 wbd_inv;
	u16 wbd_ref;
	u8 wbd_sel;
	u8 wbd_alpha;

	u16 agc1_max;
	u16 agc1_min;
	u16 agc2_max;
	u16 agc2_min;

	u8 agc1_pt1;
	u8 agc1_pt2;
	u8 agc1_pt3;

	u8 agc1_slope1;
	u8 agc1_slope2;

	u8 agc2_pt1;
	u8 agc2_pt2;

	u8 agc2_slope1;
	u8 agc2_slope2;

	u8 alpha_mant;
	u8 alpha_exp;

	u8 beta_mant;
	u8 beta_exp;

	u8 perform_agc_softsplit;

	struct {
	u16 min;
	u16 max;
	u16 min_thres;
	u16 max_thres;
	} split;
	};

	struct dibx000_bandwidth_config {
	u32 internal;
	u32 sampling;

	u8 pll_prediv;
	u8 pll_ratio;
	u8 pll_range;
	u8 pll_reset;
	u8 pll_bypass;

	u8 enable_refdiv;
	u8 bypclk_div;
	u8 IO_CLK_en_core;
	u8 ADClkSrc;
	u8 modulo;

	u16 sad_cfg;

	u32 ifreq;
	u32 timf;

	u32 xtal_hz;
	};

	enum dibx000_adc_states {
	DIBX000_SLOW_ADC_ON = 0,
	DIBX000_SLOW_ADC_OFF,
	DIBX000_ADC_ON,
	DIBX000_ADC_OFF,
	DIBX000_VBG_ENABLE,
	DIBX000_VBG_DISABLE,
	};

	#define BANDWIDTH_TO_KHZ(v) ((v) / 1000)
	#define BANDWIDTH_TO_HZ(v) ((v) * 1000)

	/* Chip output mode. */
	#define OUTMODE_HIGH_Z 0
	#define OUTMODE_MPEG2_PAR_GATED_CLK 1
	#define OUTMODE_MPEG2_PAR_CONT_CLK 2
	#define OUTMODE_MPEG2_SERIAL 7
	#define OUTMODE_DIVERSITY 4
	#define OUTMODE_MPEG2_FIFO 5
	#define OUTMODE_ANALOG_ADC 6

	#define INPUT_MODE_OFF 0x11
	#define INPUT_MODE_DIVERSITY 0x12
	#define INPUT_MODE_MPEG 0x13

	enum frontend_tune_state {
	CT_TUNER_START = 10,
	CT_TUNER_STEP_0,
	CT_TUNER_STEP_1,
	CT_TUNER_STEP_2,
	CT_TUNER_STEP_3,
	CT_TUNER_STEP_4,
	CT_TUNER_STEP_5,
	CT_TUNER_STEP_6,
	CT_TUNER_STEP_7,
	CT_TUNER_STOP,

	CT_AGC_START = 20,
	CT_AGC_STEP_0,
	CT_AGC_STEP_1,
	CT_AGC_STEP_2,
	CT_AGC_STEP_3,
	CT_AGC_STEP_4,
	CT_AGC_STOP,

	CT_DEMOD_START = 30,
	CT_DEMOD_STEP_1,
	CT_DEMOD_STEP_2,
	CT_DEMOD_STEP_3,
	CT_DEMOD_STEP_4,
	CT_DEMOD_STEP_5,
	CT_DEMOD_STEP_6,
	CT_DEMOD_STEP_7,
	CT_DEMOD_STEP_8,
	CT_DEMOD_STEP_9,
	CT_DEMOD_STEP_10,
	CT_DEMOD_STEP_11,
	CT_DEMOD_SEARCH_NEXT = 51,
	CT_DEMOD_STEP_LOCKED,
	CT_DEMOD_STOP,

	CT_DONE = 100,
	CT_SHUTDOWN,

	};

	struct dvb_frontend_parametersContext {
	#define CHANNEL_STATUS_PARAMETERS_UNKNOWN 0x01
	#define CHANNEL_STATUS_PARAMETERS_SET 0x02
	u8 status;
	u32 tune_time_estimation[2];
	s32 tps_available;
	u16 tps[9];
	};

	#define FE_STATUS_TUNE_FAILED 0
	#define FE_STATUS_TUNE_TIMED_OUT -1
	#define FE_STATUS_TUNE_TIME_TOO_SHORT -2
	#define FE_STATUS_TUNE_PENDING -3
	#define FE_STATUS_STD_SUCCESS -4
	#define FE_STATUS_FFT_SUCCESS -5
	#define FE_STATUS_DEMOD_SUCCESS -6
	#define FE_STATUS_LOCKED -7
	#define FE_STATUS_DATA_LOCKED -8

	#define FE_CALLBACK_TIME_NEVER 0xffffffff

	#define ABS(x) ((x < 0) ? (-x) : (x))

	#define DATA_BUS_ACCESS_MODE_8BIT 0x01
	#define DATA_BUS_ACCESS_MODE_16BIT 0x02
	#define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10

	struct dibGPIOFunction {
	#define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1
	#define BOARD_GPIO_COMPONENT_DEMOD 2
	u8 component;

	#define BOARD_GPIO_FUNCTION_BOARD_ON 1
	#define BOARD_GPIO_FUNCTION_BOARD_OFF 2
	#define BOARD_GPIO_FUNCTION_COMPONENT_ON 3
	#define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4
	#define BOARD_GPIO_FUNCTION_SUBBAND_PWM 5
	#define BOARD_GPIO_FUNCTION_SUBBAND_GPIO 6
	u8 function;

	/* mask, direction and value are used specify which GPIO to change GPIO0
	* is LSB and possible GPIO31 is MSB. The same bit-position as in the
	* mask is used for the direction and the value. Direction == 1 is OUT,
	* 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN
	* value has no meaning.
	*
	* In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be
	* used to do the PWM. Direction gives the PWModulator to be used.
	* Value gives the PWM value in device-dependent scale.
	*/
	u32 mask;
	u32 direction;
	u32 value;
	};

	#define MAX_NB_SUBBANDS 8
	struct dibSubbandSelection {
	u8 size; /* Actual number of subbands. */
	struct {
	u16 f_mhz;
	struct dibGPIOFunction gpio;
	} subband[MAX_NB_SUBBANDS];
	};

	#define DEMOD_TIMF_SET 0x00
	#define DEMOD_TIMF_GET 0x01
	#define DEMOD_TIMF_UPDATE 0x02

	#define MPEG_ON_DIBTX 1
	#define DIV_ON_DIBTX 2
	#define ADC_ON_DIBTX 3
	#define DEMOUT_ON_HOSTBUS 4
	#define DIBTX_ON_HOSTBUS 5
	#define MPEG_ON_HOSTBUS 6

	#endif