| /* |
| * GPIO chardev test helper |
| * |
| * Copyright (C) 2016 Bamvor Jian Zhang |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #define _GNU_SOURCE |
| #include <unistd.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <errno.h> |
| #include <string.h> |
| #include <fcntl.h> |
| #include <getopt.h> |
| #include <sys/ioctl.h> |
| #include <libmount.h> |
| #include <err.h> |
| #include <dirent.h> |
| #include <linux/gpio.h> |
| #include "../../../gpio/gpio-utils.h" |
| |
| #define CONSUMER "gpio-selftest" |
| #define GC_NUM 10 |
| enum direction { |
| OUT, |
| IN |
| }; |
| |
| static int get_debugfs(char **path) |
| { |
| struct libmnt_context *cxt; |
| struct libmnt_table *tb; |
| struct libmnt_iter *itr = NULL; |
| struct libmnt_fs *fs; |
| int found = 0; |
| |
| cxt = mnt_new_context(); |
| if (!cxt) |
| err(EXIT_FAILURE, "libmount context allocation failed"); |
| |
| itr = mnt_new_iter(MNT_ITER_FORWARD); |
| if (!itr) |
| err(EXIT_FAILURE, "failed to initialize libmount iterator"); |
| |
| if (mnt_context_get_mtab(cxt, &tb)) |
| err(EXIT_FAILURE, "failed to read mtab"); |
| |
| while (mnt_table_next_fs(tb, itr, &fs) == 0) { |
| const char *type = mnt_fs_get_fstype(fs); |
| |
| if (!strcmp(type, "debugfs")) { |
| found = 1; |
| break; |
| } |
| } |
| if (found) |
| asprintf(path, "%s/gpio", mnt_fs_get_target(fs)); |
| |
| mnt_free_iter(itr); |
| mnt_free_context(cxt); |
| |
| if (!found) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int gpio_debugfs_get(const char *consumer, int *dir, int *value) |
| { |
| char *debugfs; |
| FILE *f; |
| char *line = NULL; |
| size_t len = 0; |
| char *cur; |
| int found = 0; |
| |
| if (get_debugfs(&debugfs) != 0) |
| err(EXIT_FAILURE, "debugfs is not mounted"); |
| |
| f = fopen(debugfs, "r"); |
| if (!f) |
| err(EXIT_FAILURE, "read from gpio debugfs failed"); |
| |
| /* |
| * gpio-2 ( |gpio-selftest ) in lo |
| */ |
| while (getline(&line, &len, f) != -1) { |
| cur = strstr(line, consumer); |
| if (cur == NULL) |
| continue; |
| |
| cur = strchr(line, ')'); |
| if (!cur) |
| continue; |
| |
| cur += 2; |
| if (!strncmp(cur, "out", 3)) { |
| *dir = OUT; |
| cur += 4; |
| } else if (!strncmp(cur, "in", 2)) { |
| *dir = IN; |
| cur += 4; |
| } |
| |
| if (!strncmp(cur, "hi", 2)) |
| *value = 1; |
| else if (!strncmp(cur, "lo", 2)) |
| *value = 0; |
| |
| found = 1; |
| break; |
| } |
| free(debugfs); |
| fclose(f); |
| free(line); |
| |
| if (!found) |
| return -1; |
| |
| return 0; |
| } |
| |
| static struct gpiochip_info *list_gpiochip(const char *gpiochip_name, int *ret) |
| { |
| struct gpiochip_info *cinfo; |
| struct gpiochip_info *current; |
| const struct dirent *ent; |
| DIR *dp; |
| char *chrdev_name; |
| int fd; |
| int i = 0; |
| |
| cinfo = calloc(sizeof(struct gpiochip_info) * 4, GC_NUM + 1); |
| if (!cinfo) |
| err(EXIT_FAILURE, "gpiochip_info allocation failed"); |
| |
| current = cinfo; |
| dp = opendir("/dev"); |
| if (!dp) { |
| *ret = -errno; |
| goto error_out; |
| } else { |
| *ret = 0; |
| } |
| |
| while (ent = readdir(dp), ent) { |
| if (check_prefix(ent->d_name, "gpiochip")) { |
| *ret = asprintf(&chrdev_name, "/dev/%s", ent->d_name); |
| if (*ret < 0) |
| goto error_out; |
| |
| fd = open(chrdev_name, 0); |
| if (fd == -1) { |
| *ret = -errno; |
| fprintf(stderr, "Failed to open %s\n", |
| chrdev_name); |
| goto error_close_dir; |
| } |
| *ret = ioctl(fd, GPIO_GET_CHIPINFO_IOCTL, current); |
| if (*ret == -1) { |
| perror("Failed to issue CHIPINFO IOCTL\n"); |
| goto error_close_dir; |
| } |
| close(fd); |
| if (strcmp(current->label, gpiochip_name) == 0 |
| || check_prefix(current->label, gpiochip_name)) { |
| *ret = 0; |
| current++; |
| i++; |
| } |
| } |
| } |
| |
| if ((!*ret && i == 0) || *ret < 0) { |
| free(cinfo); |
| cinfo = NULL; |
| } |
| if (!*ret && i > 0) { |
| cinfo = realloc(cinfo, sizeof(struct gpiochip_info) * 4 * i); |
| *ret = i; |
| } |
| |
| error_close_dir: |
| closedir(dp); |
| error_out: |
| if (*ret < 0) |
| err(EXIT_FAILURE, "list gpiochip failed: %s", strerror(*ret)); |
| |
| return cinfo; |
| } |
| |
| int gpio_pin_test(struct gpiochip_info *cinfo, int line, int flag, int value) |
| { |
| struct gpiohandle_data data; |
| unsigned int lines[] = {line}; |
| int fd; |
| int debugfs_dir = IN; |
| int debugfs_value = 0; |
| int ret; |
| |
| data.values[0] = value; |
| ret = gpiotools_request_linehandle(cinfo->name, lines, 1, flag, &data, |
| CONSUMER); |
| if (ret < 0) |
| goto fail_out; |
| else |
| fd = ret; |
| |
| ret = gpio_debugfs_get(CONSUMER, &debugfs_dir, &debugfs_value); |
| if (ret) { |
| ret = -EINVAL; |
| goto fail_out; |
| } |
| if (flag & GPIOHANDLE_REQUEST_INPUT) { |
| if (debugfs_dir != IN) { |
| errno = -EINVAL; |
| ret = -errno; |
| } |
| } else if (flag & GPIOHANDLE_REQUEST_OUTPUT) { |
| if (flag & GPIOHANDLE_REQUEST_ACTIVE_LOW) |
| debugfs_value = !debugfs_value; |
| |
| if (!(debugfs_dir == OUT && value == debugfs_value)) |
| errno = -EINVAL; |
| ret = -errno; |
| |
| } |
| gpiotools_release_linehandle(fd); |
| |
| fail_out: |
| if (ret) |
| err(EXIT_FAILURE, "gpio<%s> line<%d> test flag<0x%x> value<%d>", |
| cinfo->name, line, flag, value); |
| |
| return ret; |
| } |
| |
| void gpio_pin_tests(struct gpiochip_info *cinfo, unsigned int line) |
| { |
| printf("line<%d>", line); |
| gpio_pin_test(cinfo, line, GPIOHANDLE_REQUEST_OUTPUT, 0); |
| printf("."); |
| gpio_pin_test(cinfo, line, GPIOHANDLE_REQUEST_OUTPUT, 1); |
| printf("."); |
| gpio_pin_test(cinfo, line, |
| GPIOHANDLE_REQUEST_OUTPUT | GPIOHANDLE_REQUEST_ACTIVE_LOW, |
| 0); |
| printf("."); |
| gpio_pin_test(cinfo, line, |
| GPIOHANDLE_REQUEST_OUTPUT | GPIOHANDLE_REQUEST_ACTIVE_LOW, |
| 1); |
| printf("."); |
| gpio_pin_test(cinfo, line, GPIOHANDLE_REQUEST_INPUT, 0); |
| printf("."); |
| } |
| |
| /* |
| * ./gpio-mockup-chardev gpio_chip_name_prefix is_valid_gpio_chip |
| * Return 0 if successful or exit with EXIT_FAILURE if test failed. |
| * gpio_chip_name_prefix: The prefix of gpiochip you want to test. E.g. |
| * gpio-mockup |
| * is_valid_gpio_chip: Whether the gpio_chip is valid. 1 means valid, |
| * 0 means invalid which could not be found by |
| * list_gpiochip. |
| */ |
| int main(int argc, char *argv[]) |
| { |
| char *prefix; |
| int valid; |
| struct gpiochip_info *cinfo; |
| struct gpiochip_info *current; |
| int i; |
| int ret; |
| |
| if (argc < 3) { |
| printf("Usage: %s prefix is_valid", argv[0]); |
| exit(EXIT_FAILURE); |
| } |
| |
| prefix = argv[1]; |
| valid = strcmp(argv[2], "true") == 0 ? 1 : 0; |
| |
| printf("Test gpiochip %s: ", prefix); |
| cinfo = list_gpiochip(prefix, &ret); |
| if (!cinfo) { |
| if (!valid && ret == 0) { |
| printf("Invalid test successful\n"); |
| ret = 0; |
| goto out; |
| } else { |
| ret = -EINVAL; |
| goto out; |
| } |
| } else if (cinfo && !valid) { |
| ret = -EINVAL; |
| goto out; |
| } |
| current = cinfo; |
| for (i = 0; i < ret; i++) { |
| gpio_pin_tests(current, 0); |
| gpio_pin_tests(current, current->lines - 1); |
| gpio_pin_tests(current, random() % current->lines); |
| current++; |
| } |
| ret = 0; |
| printf("successful\n"); |
| |
| out: |
| if (ret) |
| fprintf(stderr, "gpio<%s> test failed\n", prefix); |
| |
| if (cinfo) |
| free(cinfo); |
| |
| if (ret) |
| exit(EXIT_FAILURE); |
| |
| return ret; |
| } |