| /* | |
| * pSeries NUMA support | |
| * | |
| * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #define pr_fmt(fmt) "numa: " fmt | |
| #include <linux/threads.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/init.h> | |
| #include <linux/mm.h> | |
| #include <linux/mmzone.h> | |
| #include <linux/export.h> | |
| #include <linux/nodemask.h> | |
| #include <linux/cpu.h> | |
| #include <linux/notifier.h> | |
| #include <linux/memblock.h> | |
| #include <linux/of.h> | |
| #include <linux/pfn.h> | |
| #include <linux/cpuset.h> | |
| #include <linux/node.h> | |
| #include <linux/stop_machine.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/slab.h> | |
| #include <asm/cputhreads.h> | |
| #include <asm/sparsemem.h> | |
| #include <asm/prom.h> | |
| #include <asm/smp.h> | |
| #include <asm/cputhreads.h> | |
| #include <asm/topology.h> | |
| #include <asm/firmware.h> | |
| #include <asm/paca.h> | |
| #include <asm/hvcall.h> | |
| #include <asm/setup.h> | |
| #include <asm/vdso.h> | |
| static int numa_enabled = 1; | |
| static char *cmdline __initdata; | |
| static int numa_debug; | |
| #define dbg(args...) if (numa_debug) { printk(KERN_INFO args); } | |
| int numa_cpu_lookup_table[NR_CPUS]; | |
| cpumask_var_t node_to_cpumask_map[MAX_NUMNODES]; | |
| struct pglist_data *node_data[MAX_NUMNODES]; | |
| EXPORT_SYMBOL(numa_cpu_lookup_table); | |
| EXPORT_SYMBOL(node_to_cpumask_map); | |
| EXPORT_SYMBOL(node_data); | |
| static int min_common_depth; | |
| static int n_mem_addr_cells, n_mem_size_cells; | |
| static int form1_affinity; | |
| #define MAX_DISTANCE_REF_POINTS 4 | |
| static int distance_ref_points_depth; | |
| static const __be32 *distance_ref_points; | |
| static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS]; | |
| /* | |
| * Allocate node_to_cpumask_map based on number of available nodes | |
| * Requires node_possible_map to be valid. | |
| * | |
| * Note: cpumask_of_node() is not valid until after this is done. | |
| */ | |
| static void __init setup_node_to_cpumask_map(void) | |
| { | |
| unsigned int node; | |
| /* setup nr_node_ids if not done yet */ | |
| if (nr_node_ids == MAX_NUMNODES) | |
| setup_nr_node_ids(); | |
| /* allocate the map */ | |
| for_each_node(node) | |
| alloc_bootmem_cpumask_var(&node_to_cpumask_map[node]); | |
| /* cpumask_of_node() will now work */ | |
| dbg("Node to cpumask map for %d nodes\n", nr_node_ids); | |
| } | |
| static int __init fake_numa_create_new_node(unsigned long end_pfn, | |
| unsigned int *nid) | |
| { | |
| unsigned long long mem; | |
| char *p = cmdline; | |
| static unsigned int fake_nid; | |
| static unsigned long long curr_boundary; | |
| /* | |
| * Modify node id, iff we started creating NUMA nodes | |
| * We want to continue from where we left of the last time | |
| */ | |
| if (fake_nid) | |
| *nid = fake_nid; | |
| /* | |
| * In case there are no more arguments to parse, the | |
| * node_id should be the same as the last fake node id | |
| * (we've handled this above). | |
| */ | |
| if (!p) | |
| return 0; | |
| mem = memparse(p, &p); | |
| if (!mem) | |
| return 0; | |
| if (mem < curr_boundary) | |
| return 0; | |
| curr_boundary = mem; | |
| if ((end_pfn << PAGE_SHIFT) > mem) { | |
| /* | |
| * Skip commas and spaces | |
| */ | |
| while (*p == ',' || *p == ' ' || *p == '\t') | |
| p++; | |
| cmdline = p; | |
| fake_nid++; | |
| *nid = fake_nid; | |
| dbg("created new fake_node with id %d\n", fake_nid); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static void reset_numa_cpu_lookup_table(void) | |
| { | |
| unsigned int cpu; | |
| for_each_possible_cpu(cpu) | |
| numa_cpu_lookup_table[cpu] = -1; | |
| } | |
| static void update_numa_cpu_lookup_table(unsigned int cpu, int node) | |
| { | |
| numa_cpu_lookup_table[cpu] = node; | |
| } | |
| static void map_cpu_to_node(int cpu, int node) | |
| { | |
| update_numa_cpu_lookup_table(cpu, node); | |
| dbg("adding cpu %d to node %d\n", cpu, node); | |
| if (!(cpumask_test_cpu(cpu, node_to_cpumask_map[node]))) | |
| cpumask_set_cpu(cpu, node_to_cpumask_map[node]); | |
| } | |
| #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PPC_SPLPAR) | |
| static void unmap_cpu_from_node(unsigned long cpu) | |
| { | |
| int node = numa_cpu_lookup_table[cpu]; | |
| dbg("removing cpu %lu from node %d\n", cpu, node); | |
| if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) { | |
| cpumask_clear_cpu(cpu, node_to_cpumask_map[node]); | |
| } else { | |
| printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n", | |
| cpu, node); | |
| } | |
| } | |
| #endif /* CONFIG_HOTPLUG_CPU || CONFIG_PPC_SPLPAR */ | |
| /* must hold reference to node during call */ | |
| static const __be32 *of_get_associativity(struct device_node *dev) | |
| { | |
| return of_get_property(dev, "ibm,associativity", NULL); | |
| } | |
| /* | |
| * Returns the property linux,drconf-usable-memory if | |
| * it exists (the property exists only in kexec/kdump kernels, | |
| * added by kexec-tools) | |
| */ | |
| static const __be32 *of_get_usable_memory(struct device_node *memory) | |
| { | |
| const __be32 *prop; | |
| u32 len; | |
| prop = of_get_property(memory, "linux,drconf-usable-memory", &len); | |
| if (!prop || len < sizeof(unsigned int)) | |
| return NULL; | |
| return prop; | |
| } | |
| int __node_distance(int a, int b) | |
| { | |
| int i; | |
| int distance = LOCAL_DISTANCE; | |
| if (!form1_affinity) | |
| return ((a == b) ? LOCAL_DISTANCE : REMOTE_DISTANCE); | |
| for (i = 0; i < distance_ref_points_depth; i++) { | |
| if (distance_lookup_table[a][i] == distance_lookup_table[b][i]) | |
| break; | |
| /* Double the distance for each NUMA level */ | |
| distance *= 2; | |
| } | |
| return distance; | |
| } | |
| EXPORT_SYMBOL(__node_distance); | |
| static void initialize_distance_lookup_table(int nid, | |
| const __be32 *associativity) | |
| { | |
| int i; | |
| if (!form1_affinity) | |
| return; | |
| for (i = 0; i < distance_ref_points_depth; i++) { | |
| const __be32 *entry; | |
| entry = &associativity[be32_to_cpu(distance_ref_points[i]) - 1]; | |
| distance_lookup_table[nid][i] = of_read_number(entry, 1); | |
| } | |
| } | |
| /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa | |
| * info is found. | |
| */ | |
| static int associativity_to_nid(const __be32 *associativity) | |
| { | |
| int nid = -1; | |
| if (min_common_depth == -1) | |
| goto out; | |
| if (of_read_number(associativity, 1) >= min_common_depth) | |
| nid = of_read_number(&associativity[min_common_depth], 1); | |
| /* POWER4 LPAR uses 0xffff as invalid node */ | |
| if (nid == 0xffff || nid >= MAX_NUMNODES) | |
| nid = -1; | |
| if (nid > 0 && | |
| of_read_number(associativity, 1) >= distance_ref_points_depth) { | |
| /* | |
| * Skip the length field and send start of associativity array | |
| */ | |
| initialize_distance_lookup_table(nid, associativity + 1); | |
| } | |
| out: | |
| return nid; | |
| } | |
| /* Returns the nid associated with the given device tree node, | |
| * or -1 if not found. | |
| */ | |
| static int of_node_to_nid_single(struct device_node *device) | |
| { | |
| int nid = -1; | |
| const __be32 *tmp; | |
| tmp = of_get_associativity(device); | |
| if (tmp) | |
| nid = associativity_to_nid(tmp); | |
| return nid; | |
| } | |
| /* Walk the device tree upwards, looking for an associativity id */ | |
| int of_node_to_nid(struct device_node *device) | |
| { | |
| int nid = -1; | |
| of_node_get(device); | |
| while (device) { | |
| nid = of_node_to_nid_single(device); | |
| if (nid != -1) | |
| break; | |
| device = of_get_next_parent(device); | |
| } | |
| of_node_put(device); | |
| return nid; | |
| } | |
| EXPORT_SYMBOL(of_node_to_nid); | |
| static int __init find_min_common_depth(void) | |
| { | |
| int depth; | |
| struct device_node *root; | |
| if (firmware_has_feature(FW_FEATURE_OPAL)) | |
| root = of_find_node_by_path("/ibm,opal"); | |
| else | |
| root = of_find_node_by_path("/rtas"); | |
| if (!root) | |
| root = of_find_node_by_path("/"); | |
| /* | |
| * This property is a set of 32-bit integers, each representing | |
| * an index into the ibm,associativity nodes. | |
| * | |
| * With form 0 affinity the first integer is for an SMP configuration | |
| * (should be all 0's) and the second is for a normal NUMA | |
| * configuration. We have only one level of NUMA. | |
| * | |
| * With form 1 affinity the first integer is the most significant | |
| * NUMA boundary and the following are progressively less significant | |
| * boundaries. There can be more than one level of NUMA. | |
| */ | |
| distance_ref_points = of_get_property(root, | |
| "ibm,associativity-reference-points", | |
| &distance_ref_points_depth); | |
| if (!distance_ref_points) { | |
| dbg("NUMA: ibm,associativity-reference-points not found.\n"); | |
| goto err; | |
| } | |
| distance_ref_points_depth /= sizeof(int); | |
| if (firmware_has_feature(FW_FEATURE_OPAL) || | |
| firmware_has_feature(FW_FEATURE_TYPE1_AFFINITY)) { | |
| dbg("Using form 1 affinity\n"); | |
| form1_affinity = 1; | |
| } | |
| if (form1_affinity) { | |
| depth = of_read_number(distance_ref_points, 1); | |
| } else { | |
| if (distance_ref_points_depth < 2) { | |
| printk(KERN_WARNING "NUMA: " | |
| "short ibm,associativity-reference-points\n"); | |
| goto err; | |
| } | |
| depth = of_read_number(&distance_ref_points[1], 1); | |
| } | |
| /* | |
| * Warn and cap if the hardware supports more than | |
| * MAX_DISTANCE_REF_POINTS domains. | |
| */ | |
| if (distance_ref_points_depth > MAX_DISTANCE_REF_POINTS) { | |
| printk(KERN_WARNING "NUMA: distance array capped at " | |
| "%d entries\n", MAX_DISTANCE_REF_POINTS); | |
| distance_ref_points_depth = MAX_DISTANCE_REF_POINTS; | |
| } | |
| of_node_put(root); | |
| return depth; | |
| err: | |
| of_node_put(root); | |
| return -1; | |
| } | |
| static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells) | |
| { | |
| struct device_node *memory = NULL; | |
| memory = of_find_node_by_type(memory, "memory"); | |
| if (!memory) | |
| panic("numa.c: No memory nodes found!"); | |
| *n_addr_cells = of_n_addr_cells(memory); | |
| *n_size_cells = of_n_size_cells(memory); | |
| of_node_put(memory); | |
| } | |
| static unsigned long read_n_cells(int n, const __be32 **buf) | |
| { | |
| unsigned long result = 0; | |
| while (n--) { | |
| result = (result << 32) | of_read_number(*buf, 1); | |
| (*buf)++; | |
| } | |
| return result; | |
| } | |
| /* | |
| * Read the next memblock list entry from the ibm,dynamic-memory property | |
| * and return the information in the provided of_drconf_cell structure. | |
| */ | |
| static void read_drconf_cell(struct of_drconf_cell *drmem, const __be32 **cellp) | |
| { | |
| const __be32 *cp; | |
| drmem->base_addr = read_n_cells(n_mem_addr_cells, cellp); | |
| cp = *cellp; | |
| drmem->drc_index = of_read_number(cp, 1); | |
| drmem->reserved = of_read_number(&cp[1], 1); | |
| drmem->aa_index = of_read_number(&cp[2], 1); | |
| drmem->flags = of_read_number(&cp[3], 1); | |
| *cellp = cp + 4; | |
| } | |
| /* | |
| * Retrieve and validate the ibm,dynamic-memory property of the device tree. | |
| * | |
| * The layout of the ibm,dynamic-memory property is a number N of memblock | |
| * list entries followed by N memblock list entries. Each memblock list entry | |
| * contains information as laid out in the of_drconf_cell struct above. | |
| */ | |
| static int of_get_drconf_memory(struct device_node *memory, const __be32 **dm) | |
| { | |
| const __be32 *prop; | |
| u32 len, entries; | |
| prop = of_get_property(memory, "ibm,dynamic-memory", &len); | |
| if (!prop || len < sizeof(unsigned int)) | |
| return 0; | |
| entries = of_read_number(prop++, 1); | |
| /* Now that we know the number of entries, revalidate the size | |
| * of the property read in to ensure we have everything | |
| */ | |
| if (len < (entries * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int)) | |
| return 0; | |
| *dm = prop; | |
| return entries; | |
| } | |
| /* | |
| * Retrieve and validate the ibm,lmb-size property for drconf memory | |
| * from the device tree. | |
| */ | |
| static u64 of_get_lmb_size(struct device_node *memory) | |
| { | |
| const __be32 *prop; | |
| u32 len; | |
| prop = of_get_property(memory, "ibm,lmb-size", &len); | |
| if (!prop || len < sizeof(unsigned int)) | |
| return 0; | |
| return read_n_cells(n_mem_size_cells, &prop); | |
| } | |
| struct assoc_arrays { | |
| u32 n_arrays; | |
| u32 array_sz; | |
| const __be32 *arrays; | |
| }; | |
| /* | |
| * Retrieve and validate the list of associativity arrays for drconf | |
| * memory from the ibm,associativity-lookup-arrays property of the | |
| * device tree.. | |
| * | |
| * The layout of the ibm,associativity-lookup-arrays property is a number N | |
| * indicating the number of associativity arrays, followed by a number M | |
| * indicating the size of each associativity array, followed by a list | |
| * of N associativity arrays. | |
| */ | |
| static int of_get_assoc_arrays(struct device_node *memory, | |
| struct assoc_arrays *aa) | |
| { | |
| const __be32 *prop; | |
| u32 len; | |
| prop = of_get_property(memory, "ibm,associativity-lookup-arrays", &len); | |
| if (!prop || len < 2 * sizeof(unsigned int)) | |
| return -1; | |
| aa->n_arrays = of_read_number(prop++, 1); | |
| aa->array_sz = of_read_number(prop++, 1); | |
| /* Now that we know the number of arrays and size of each array, | |
| * revalidate the size of the property read in. | |
| */ | |
| if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int)) | |
| return -1; | |
| aa->arrays = prop; | |
| return 0; | |
| } | |
| /* | |
| * This is like of_node_to_nid_single() for memory represented in the | |
| * ibm,dynamic-reconfiguration-memory node. | |
| */ | |
| static int of_drconf_to_nid_single(struct of_drconf_cell *drmem, | |
| struct assoc_arrays *aa) | |
| { | |
| int default_nid = 0; | |
| int nid = default_nid; | |
| int index; | |
| if (min_common_depth > 0 && min_common_depth <= aa->array_sz && | |
| !(drmem->flags & DRCONF_MEM_AI_INVALID) && | |
| drmem->aa_index < aa->n_arrays) { | |
| index = drmem->aa_index * aa->array_sz + min_common_depth - 1; | |
| nid = of_read_number(&aa->arrays[index], 1); | |
| if (nid == 0xffff || nid >= MAX_NUMNODES) | |
| nid = default_nid; | |
| if (nid > 0) { | |
| index = drmem->aa_index * aa->array_sz; | |
| initialize_distance_lookup_table(nid, | |
| &aa->arrays[index]); | |
| } | |
| } | |
| return nid; | |
| } | |
| /* | |
| * Figure out to which domain a cpu belongs and stick it there. | |
| * Return the id of the domain used. | |
| */ | |
| static int numa_setup_cpu(unsigned long lcpu) | |
| { | |
| int nid = -1; | |
| struct device_node *cpu; | |
| /* | |
| * If a valid cpu-to-node mapping is already available, use it | |
| * directly instead of querying the firmware, since it represents | |
| * the most recent mapping notified to us by the platform (eg: VPHN). | |
| */ | |
| if ((nid = numa_cpu_lookup_table[lcpu]) >= 0) { | |
| map_cpu_to_node(lcpu, nid); | |
| return nid; | |
| } | |
| cpu = of_get_cpu_node(lcpu, NULL); | |
| if (!cpu) { | |
| WARN_ON(1); | |
| if (cpu_present(lcpu)) | |
| goto out_present; | |
| else | |
| goto out; | |
| } | |
| nid = of_node_to_nid_single(cpu); | |
| out_present: | |
| if (nid < 0 || !node_online(nid)) | |
| nid = first_online_node; | |
| map_cpu_to_node(lcpu, nid); | |
| of_node_put(cpu); | |
| out: | |
| return nid; | |
| } | |
| static void verify_cpu_node_mapping(int cpu, int node) | |
| { | |
| int base, sibling, i; | |
| /* Verify that all the threads in the core belong to the same node */ | |
| base = cpu_first_thread_sibling(cpu); | |
| for (i = 0; i < threads_per_core; i++) { | |
| sibling = base + i; | |
| if (sibling == cpu || cpu_is_offline(sibling)) | |
| continue; | |
| if (cpu_to_node(sibling) != node) { | |
| WARN(1, "CPU thread siblings %d and %d don't belong" | |
| " to the same node!\n", cpu, sibling); | |
| break; | |
| } | |
| } | |
| } | |
| /* Must run before sched domains notifier. */ | |
| static int ppc_numa_cpu_prepare(unsigned int cpu) | |
| { | |
| int nid; | |
| nid = numa_setup_cpu(cpu); | |
| verify_cpu_node_mapping(cpu, nid); | |
| return 0; | |
| } | |
| static int ppc_numa_cpu_dead(unsigned int cpu) | |
| { | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| unmap_cpu_from_node(cpu); | |
| #endif | |
| return 0; | |
| } | |
| /* | |
| * Check and possibly modify a memory region to enforce the memory limit. | |
| * | |
| * Returns the size the region should have to enforce the memory limit. | |
| * This will either be the original value of size, a truncated value, | |
| * or zero. If the returned value of size is 0 the region should be | |
| * discarded as it lies wholly above the memory limit. | |
| */ | |
| static unsigned long __init numa_enforce_memory_limit(unsigned long start, | |
| unsigned long size) | |
| { | |
| /* | |
| * We use memblock_end_of_DRAM() in here instead of memory_limit because | |
| * we've already adjusted it for the limit and it takes care of | |
| * having memory holes below the limit. Also, in the case of | |
| * iommu_is_off, memory_limit is not set but is implicitly enforced. | |
| */ | |
| if (start + size <= memblock_end_of_DRAM()) | |
| return size; | |
| if (start >= memblock_end_of_DRAM()) | |
| return 0; | |
| return memblock_end_of_DRAM() - start; | |
| } | |
| /* | |
| * Reads the counter for a given entry in | |
| * linux,drconf-usable-memory property | |
| */ | |
| static inline int __init read_usm_ranges(const __be32 **usm) | |
| { | |
| /* | |
| * For each lmb in ibm,dynamic-memory a corresponding | |
| * entry in linux,drconf-usable-memory property contains | |
| * a counter followed by that many (base, size) duple. | |
| * read the counter from linux,drconf-usable-memory | |
| */ | |
| return read_n_cells(n_mem_size_cells, usm); | |
| } | |
| /* | |
| * Extract NUMA information from the ibm,dynamic-reconfiguration-memory | |
| * node. This assumes n_mem_{addr,size}_cells have been set. | |
| */ | |
| static void __init parse_drconf_memory(struct device_node *memory) | |
| { | |
| const __be32 *uninitialized_var(dm), *usm; | |
| unsigned int n, rc, ranges, is_kexec_kdump = 0; | |
| unsigned long lmb_size, base, size, sz; | |
| int nid; | |
| struct assoc_arrays aa = { .arrays = NULL }; | |
| n = of_get_drconf_memory(memory, &dm); | |
| if (!n) | |
| return; | |
| lmb_size = of_get_lmb_size(memory); | |
| if (!lmb_size) | |
| return; | |
| rc = of_get_assoc_arrays(memory, &aa); | |
| if (rc) | |
| return; | |
| /* check if this is a kexec/kdump kernel */ | |
| usm = of_get_usable_memory(memory); | |
| if (usm != NULL) | |
| is_kexec_kdump = 1; | |
| for (; n != 0; --n) { | |
| struct of_drconf_cell drmem; | |
| read_drconf_cell(&drmem, &dm); | |
| /* skip this block if the reserved bit is set in flags (0x80) | |
| or if the block is not assigned to this partition (0x8) */ | |
| if ((drmem.flags & DRCONF_MEM_RESERVED) | |
| || !(drmem.flags & DRCONF_MEM_ASSIGNED)) | |
| continue; | |
| base = drmem.base_addr; | |
| size = lmb_size; | |
| ranges = 1; | |
| if (is_kexec_kdump) { | |
| ranges = read_usm_ranges(&usm); | |
| if (!ranges) /* there are no (base, size) duple */ | |
| continue; | |
| } | |
| do { | |
| if (is_kexec_kdump) { | |
| base = read_n_cells(n_mem_addr_cells, &usm); | |
| size = read_n_cells(n_mem_size_cells, &usm); | |
| } | |
| nid = of_drconf_to_nid_single(&drmem, &aa); | |
| fake_numa_create_new_node( | |
| ((base + size) >> PAGE_SHIFT), | |
| &nid); | |
| node_set_online(nid); | |
| sz = numa_enforce_memory_limit(base, size); | |
| if (sz) | |
| memblock_set_node(base, sz, | |
| &memblock.memory, nid); | |
| } while (--ranges); | |
| } | |
| } | |
| static int __init parse_numa_properties(void) | |
| { | |
| struct device_node *memory; | |
| int default_nid = 0; | |
| unsigned long i; | |
| if (numa_enabled == 0) { | |
| printk(KERN_WARNING "NUMA disabled by user\n"); | |
| return -1; | |
| } | |
| min_common_depth = find_min_common_depth(); | |
| if (min_common_depth < 0) | |
| return min_common_depth; | |
| dbg("NUMA associativity depth for CPU/Memory: %d\n", min_common_depth); | |
| /* | |
| * Even though we connect cpus to numa domains later in SMP | |
| * init, we need to know the node ids now. This is because | |
| * each node to be onlined must have NODE_DATA etc backing it. | |
| */ | |
| for_each_present_cpu(i) { | |
| struct device_node *cpu; | |
| int nid; | |
| cpu = of_get_cpu_node(i, NULL); | |
| BUG_ON(!cpu); | |
| nid = of_node_to_nid_single(cpu); | |
| of_node_put(cpu); | |
| /* | |
| * Don't fall back to default_nid yet -- we will plug | |
| * cpus into nodes once the memory scan has discovered | |
| * the topology. | |
| */ | |
| if (nid < 0) | |
| continue; | |
| node_set_online(nid); | |
| } | |
| get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells); | |
| for_each_node_by_type(memory, "memory") { | |
| unsigned long start; | |
| unsigned long size; | |
| int nid; | |
| int ranges; | |
| const __be32 *memcell_buf; | |
| unsigned int len; | |
| memcell_buf = of_get_property(memory, | |
| "linux,usable-memory", &len); | |
| if (!memcell_buf || len <= 0) | |
| memcell_buf = of_get_property(memory, "reg", &len); | |
| if (!memcell_buf || len <= 0) | |
| continue; | |
| /* ranges in cell */ | |
| ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells); | |
| new_range: | |
| /* these are order-sensitive, and modify the buffer pointer */ | |
| start = read_n_cells(n_mem_addr_cells, &memcell_buf); | |
| size = read_n_cells(n_mem_size_cells, &memcell_buf); | |
| /* | |
| * Assumption: either all memory nodes or none will | |
| * have associativity properties. If none, then | |
| * everything goes to default_nid. | |
| */ | |
| nid = of_node_to_nid_single(memory); | |
| if (nid < 0) | |
| nid = default_nid; | |
| fake_numa_create_new_node(((start + size) >> PAGE_SHIFT), &nid); | |
| node_set_online(nid); | |
| size = numa_enforce_memory_limit(start, size); | |
| if (size) | |
| memblock_set_node(start, size, &memblock.memory, nid); | |
| if (--ranges) | |
| goto new_range; | |
| } | |
| /* | |
| * Now do the same thing for each MEMBLOCK listed in the | |
| * ibm,dynamic-memory property in the | |
| * ibm,dynamic-reconfiguration-memory node. | |
| */ | |
| memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); | |
| if (memory) | |
| parse_drconf_memory(memory); | |
| return 0; | |
| } | |
| static void __init setup_nonnuma(void) | |
| { | |
| unsigned long top_of_ram = memblock_end_of_DRAM(); | |
| unsigned long total_ram = memblock_phys_mem_size(); | |
| unsigned long start_pfn, end_pfn; | |
| unsigned int nid = 0; | |
| struct memblock_region *reg; | |
| printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", | |
| top_of_ram, total_ram); | |
| printk(KERN_DEBUG "Memory hole size: %ldMB\n", | |
| (top_of_ram - total_ram) >> 20); | |
| for_each_memblock(memory, reg) { | |
| start_pfn = memblock_region_memory_base_pfn(reg); | |
| end_pfn = memblock_region_memory_end_pfn(reg); | |
| fake_numa_create_new_node(end_pfn, &nid); | |
| memblock_set_node(PFN_PHYS(start_pfn), | |
| PFN_PHYS(end_pfn - start_pfn), | |
| &memblock.memory, nid); | |
| node_set_online(nid); | |
| } | |
| } | |
| void __init dump_numa_cpu_topology(void) | |
| { | |
| unsigned int node; | |
| unsigned int cpu, count; | |
| if (min_common_depth == -1 || !numa_enabled) | |
| return; | |
| for_each_online_node(node) { | |
| pr_info("Node %d CPUs:", node); | |
| count = 0; | |
| /* | |
| * If we used a CPU iterator here we would miss printing | |
| * the holes in the cpumap. | |
| */ | |
| for (cpu = 0; cpu < nr_cpu_ids; cpu++) { | |
| if (cpumask_test_cpu(cpu, | |
| node_to_cpumask_map[node])) { | |
| if (count == 0) | |
| pr_cont(" %u", cpu); | |
| ++count; | |
| } else { | |
| if (count > 1) | |
| pr_cont("-%u", cpu - 1); | |
| count = 0; | |
| } | |
| } | |
| if (count > 1) | |
| pr_cont("-%u", nr_cpu_ids - 1); | |
| pr_cont("\n"); | |
| } | |
| } | |
| /* Initialize NODE_DATA for a node on the local memory */ | |
| static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn) | |
| { | |
| u64 spanned_pages = end_pfn - start_pfn; | |
| const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES); | |
| u64 nd_pa; | |
| void *nd; | |
| int tnid; | |
| nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid); | |
| nd = __va(nd_pa); | |
| /* report and initialize */ | |
| pr_info(" NODE_DATA [mem %#010Lx-%#010Lx]\n", | |
| nd_pa, nd_pa + nd_size - 1); | |
| tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT); | |
| if (tnid != nid) | |
| pr_info(" NODE_DATA(%d) on node %d\n", nid, tnid); | |
| node_data[nid] = nd; | |
| memset(NODE_DATA(nid), 0, sizeof(pg_data_t)); | |
| NODE_DATA(nid)->node_id = nid; | |
| NODE_DATA(nid)->node_start_pfn = start_pfn; | |
| NODE_DATA(nid)->node_spanned_pages = spanned_pages; | |
| } | |
| void __init initmem_init(void) | |
| { | |
| int nid, cpu; | |
| max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT; | |
| max_pfn = max_low_pfn; | |
| if (parse_numa_properties()) | |
| setup_nonnuma(); | |
| memblock_dump_all(); | |
| /* | |
| * Reduce the possible NUMA nodes to the online NUMA nodes, | |
| * since we do not support node hotplug. This ensures that we | |
| * lower the maximum NUMA node ID to what is actually present. | |
| */ | |
| nodes_and(node_possible_map, node_possible_map, node_online_map); | |
| for_each_online_node(nid) { | |
| unsigned long start_pfn, end_pfn; | |
| get_pfn_range_for_nid(nid, &start_pfn, &end_pfn); | |
| setup_node_data(nid, start_pfn, end_pfn); | |
| sparse_memory_present_with_active_regions(nid); | |
| } | |
| sparse_init(); | |
| setup_node_to_cpumask_map(); | |
| reset_numa_cpu_lookup_table(); | |
| /* | |
| * We need the numa_cpu_lookup_table to be accurate for all CPUs, | |
| * even before we online them, so that we can use cpu_to_{node,mem} | |
| * early in boot, cf. smp_prepare_cpus(). | |
| * _nocalls() + manual invocation is used because cpuhp is not yet | |
| * initialized for the boot CPU. | |
| */ | |
| cpuhp_setup_state_nocalls(CPUHP_POWER_NUMA_PREPARE, "powerpc/numa:prepare", | |
| ppc_numa_cpu_prepare, ppc_numa_cpu_dead); | |
| for_each_present_cpu(cpu) | |
| numa_setup_cpu(cpu); | |
| } | |
| static int __init early_numa(char *p) | |
| { | |
| if (!p) | |
| return 0; | |
| if (strstr(p, "off")) | |
| numa_enabled = 0; | |
| if (strstr(p, "debug")) | |
| numa_debug = 1; | |
| p = strstr(p, "fake="); | |
| if (p) | |
| cmdline = p + strlen("fake="); | |
| return 0; | |
| } | |
| early_param("numa", early_numa); | |
| static bool topology_updates_enabled = true; | |
| static int __init early_topology_updates(char *p) | |
| { | |
| if (!p) | |
| return 0; | |
| if (!strcmp(p, "off")) { | |
| pr_info("Disabling topology updates\n"); | |
| topology_updates_enabled = false; | |
| } | |
| return 0; | |
| } | |
| early_param("topology_updates", early_topology_updates); | |
| #ifdef CONFIG_MEMORY_HOTPLUG | |
| /* | |
| * Find the node associated with a hot added memory section for | |
| * memory represented in the device tree by the property | |
| * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory. | |
| */ | |
| static int hot_add_drconf_scn_to_nid(struct device_node *memory, | |
| unsigned long scn_addr) | |
| { | |
| const __be32 *dm; | |
| unsigned int drconf_cell_cnt, rc; | |
| unsigned long lmb_size; | |
| struct assoc_arrays aa; | |
| int nid = -1; | |
| drconf_cell_cnt = of_get_drconf_memory(memory, &dm); | |
| if (!drconf_cell_cnt) | |
| return -1; | |
| lmb_size = of_get_lmb_size(memory); | |
| if (!lmb_size) | |
| return -1; | |
| rc = of_get_assoc_arrays(memory, &aa); | |
| if (rc) | |
| return -1; | |
| for (; drconf_cell_cnt != 0; --drconf_cell_cnt) { | |
| struct of_drconf_cell drmem; | |
| read_drconf_cell(&drmem, &dm); | |
| /* skip this block if it is reserved or not assigned to | |
| * this partition */ | |
| if ((drmem.flags & DRCONF_MEM_RESERVED) | |
| || !(drmem.flags & DRCONF_MEM_ASSIGNED)) | |
| continue; | |
| if ((scn_addr < drmem.base_addr) | |
| || (scn_addr >= (drmem.base_addr + lmb_size))) | |
| continue; | |
| nid = of_drconf_to_nid_single(&drmem, &aa); | |
| break; | |
| } | |
| return nid; | |
| } | |
| /* | |
| * Find the node associated with a hot added memory section for memory | |
| * represented in the device tree as a node (i.e. memory@XXXX) for | |
| * each memblock. | |
| */ | |
| static int hot_add_node_scn_to_nid(unsigned long scn_addr) | |
| { | |
| struct device_node *memory; | |
| int nid = -1; | |
| for_each_node_by_type(memory, "memory") { | |
| unsigned long start, size; | |
| int ranges; | |
| const __be32 *memcell_buf; | |
| unsigned int len; | |
| memcell_buf = of_get_property(memory, "reg", &len); | |
| if (!memcell_buf || len <= 0) | |
| continue; | |
| /* ranges in cell */ | |
| ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells); | |
| while (ranges--) { | |
| start = read_n_cells(n_mem_addr_cells, &memcell_buf); | |
| size = read_n_cells(n_mem_size_cells, &memcell_buf); | |
| if ((scn_addr < start) || (scn_addr >= (start + size))) | |
| continue; | |
| nid = of_node_to_nid_single(memory); | |
| break; | |
| } | |
| if (nid >= 0) | |
| break; | |
| } | |
| of_node_put(memory); | |
| return nid; | |
| } | |
| /* | |
| * Find the node associated with a hot added memory section. Section | |
| * corresponds to a SPARSEMEM section, not an MEMBLOCK. It is assumed that | |
| * sections are fully contained within a single MEMBLOCK. | |
| */ | |
| int hot_add_scn_to_nid(unsigned long scn_addr) | |
| { | |
| struct device_node *memory = NULL; | |
| int nid; | |
| if (!numa_enabled || (min_common_depth < 0)) | |
| return first_online_node; | |
| memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); | |
| if (memory) { | |
| nid = hot_add_drconf_scn_to_nid(memory, scn_addr); | |
| of_node_put(memory); | |
| } else { | |
| nid = hot_add_node_scn_to_nid(scn_addr); | |
| } | |
| if (nid < 0 || !node_possible(nid)) | |
| nid = first_online_node; | |
| return nid; | |
| } | |
| static u64 hot_add_drconf_memory_max(void) | |
| { | |
| struct device_node *memory = NULL; | |
| struct device_node *dn = NULL; | |
| unsigned int drconf_cell_cnt = 0; | |
| u64 lmb_size = 0; | |
| const __be32 *dm = NULL; | |
| const __be64 *lrdr = NULL; | |
| struct of_drconf_cell drmem; | |
| dn = of_find_node_by_path("/rtas"); | |
| if (dn) { | |
| lrdr = of_get_property(dn, "ibm,lrdr-capacity", NULL); | |
| of_node_put(dn); | |
| if (lrdr) | |
| return be64_to_cpup(lrdr); | |
| } | |
| memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); | |
| if (memory) { | |
| drconf_cell_cnt = of_get_drconf_memory(memory, &dm); | |
| lmb_size = of_get_lmb_size(memory); | |
| /* Advance to the last cell, each cell has 6 32 bit integers */ | |
| dm += (drconf_cell_cnt - 1) * 6; | |
| read_drconf_cell(&drmem, &dm); | |
| of_node_put(memory); | |
| return drmem.base_addr + lmb_size; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * memory_hotplug_max - return max address of memory that may be added | |
| * | |
| * This is currently only used on systems that support drconfig memory | |
| * hotplug. | |
| */ | |
| u64 memory_hotplug_max(void) | |
| { | |
| return max(hot_add_drconf_memory_max(), memblock_end_of_DRAM()); | |
| } | |
| #endif /* CONFIG_MEMORY_HOTPLUG */ | |
| /* Virtual Processor Home Node (VPHN) support */ | |
| #ifdef CONFIG_PPC_SPLPAR | |
| #include "vphn.h" | |
| struct topology_update_data { | |
| struct topology_update_data *next; | |
| unsigned int cpu; | |
| int old_nid; | |
| int new_nid; | |
| }; | |
| #define TOPOLOGY_DEF_TIMER_SECS 60 | |
| static u8 vphn_cpu_change_counts[NR_CPUS][MAX_DISTANCE_REF_POINTS]; | |
| static cpumask_t cpu_associativity_changes_mask; | |
| static int vphn_enabled; | |
| static int prrn_enabled; | |
| static void reset_topology_timer(void); | |
| static int topology_timer_secs = 1; | |
| static int topology_inited; | |
| static int topology_update_needed; | |
| /* | |
| * Change polling interval for associativity changes. | |
| */ | |
| int timed_topology_update(int nsecs) | |
| { | |
| if (vphn_enabled) { | |
| if (nsecs > 0) | |
| topology_timer_secs = nsecs; | |
| else | |
| topology_timer_secs = TOPOLOGY_DEF_TIMER_SECS; | |
| reset_topology_timer(); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Store the current values of the associativity change counters in the | |
| * hypervisor. | |
| */ | |
| static void setup_cpu_associativity_change_counters(void) | |
| { | |
| int cpu; | |
| /* The VPHN feature supports a maximum of 8 reference points */ | |
| BUILD_BUG_ON(MAX_DISTANCE_REF_POINTS > 8); | |
| for_each_possible_cpu(cpu) { | |
| int i; | |
| u8 *counts = vphn_cpu_change_counts[cpu]; | |
| volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; | |
| for (i = 0; i < distance_ref_points_depth; i++) | |
| counts[i] = hypervisor_counts[i]; | |
| } | |
| } | |
| /* | |
| * The hypervisor maintains a set of 8 associativity change counters in | |
| * the VPA of each cpu that correspond to the associativity levels in the | |
| * ibm,associativity-reference-points property. When an associativity | |
| * level changes, the corresponding counter is incremented. | |
| * | |
| * Set a bit in cpu_associativity_changes_mask for each cpu whose home | |
| * node associativity levels have changed. | |
| * | |
| * Returns the number of cpus with unhandled associativity changes. | |
| */ | |
| static int update_cpu_associativity_changes_mask(void) | |
| { | |
| int cpu; | |
| cpumask_t *changes = &cpu_associativity_changes_mask; | |
| for_each_possible_cpu(cpu) { | |
| int i, changed = 0; | |
| u8 *counts = vphn_cpu_change_counts[cpu]; | |
| volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; | |
| for (i = 0; i < distance_ref_points_depth; i++) { | |
| if (hypervisor_counts[i] != counts[i]) { | |
| counts[i] = hypervisor_counts[i]; | |
| changed = 1; | |
| } | |
| } | |
| if (changed) { | |
| cpumask_or(changes, changes, cpu_sibling_mask(cpu)); | |
| cpu = cpu_last_thread_sibling(cpu); | |
| } | |
| } | |
| return cpumask_weight(changes); | |
| } | |
| /* | |
| * Retrieve the new associativity information for a virtual processor's | |
| * home node. | |
| */ | |
| static long hcall_vphn(unsigned long cpu, __be32 *associativity) | |
| { | |
| long rc; | |
| long retbuf[PLPAR_HCALL9_BUFSIZE] = {0}; | |
| u64 flags = 1; | |
| int hwcpu = get_hard_smp_processor_id(cpu); | |
| rc = plpar_hcall9(H_HOME_NODE_ASSOCIATIVITY, retbuf, flags, hwcpu); | |
| vphn_unpack_associativity(retbuf, associativity); | |
| return rc; | |
| } | |
| static long vphn_get_associativity(unsigned long cpu, | |
| __be32 *associativity) | |
| { | |
| long rc; | |
| rc = hcall_vphn(cpu, associativity); | |
| switch (rc) { | |
| case H_FUNCTION: | |
| printk(KERN_INFO | |
| "VPHN is not supported. Disabling polling...\n"); | |
| stop_topology_update(); | |
| break; | |
| case H_HARDWARE: | |
| printk(KERN_ERR | |
| "hcall_vphn() experienced a hardware fault " | |
| "preventing VPHN. Disabling polling...\n"); | |
| stop_topology_update(); | |
| break; | |
| case H_SUCCESS: | |
| dbg("VPHN hcall succeeded. Reset polling...\n"); | |
| timed_topology_update(0); | |
| break; | |
| } | |
| return rc; | |
| } | |
| /* | |
| * Update the CPU maps and sysfs entries for a single CPU when its NUMA | |
| * characteristics change. This function doesn't perform any locking and is | |
| * only safe to call from stop_machine(). | |
| */ | |
| static int update_cpu_topology(void *data) | |
| { | |
| struct topology_update_data *update; | |
| unsigned long cpu; | |
| if (!data) | |
| return -EINVAL; | |
| cpu = smp_processor_id(); | |
| for (update = data; update; update = update->next) { | |
| int new_nid = update->new_nid; | |
| if (cpu != update->cpu) | |
| continue; | |
| unmap_cpu_from_node(cpu); | |
| map_cpu_to_node(cpu, new_nid); | |
| set_cpu_numa_node(cpu, new_nid); | |
| set_cpu_numa_mem(cpu, local_memory_node(new_nid)); | |
| vdso_getcpu_init(); | |
| } | |
| return 0; | |
| } | |
| static int update_lookup_table(void *data) | |
| { | |
| struct topology_update_data *update; | |
| if (!data) | |
| return -EINVAL; | |
| /* | |
| * Upon topology update, the numa-cpu lookup table needs to be updated | |
| * for all threads in the core, including offline CPUs, to ensure that | |
| * future hotplug operations respect the cpu-to-node associativity | |
| * properly. | |
| */ | |
| for (update = data; update; update = update->next) { | |
| int nid, base, j; | |
| nid = update->new_nid; | |
| base = cpu_first_thread_sibling(update->cpu); | |
| for (j = 0; j < threads_per_core; j++) { | |
| update_numa_cpu_lookup_table(base + j, nid); | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Update the node maps and sysfs entries for each cpu whose home node | |
| * has changed. Returns 1 when the topology has changed, and 0 otherwise. | |
| * | |
| * cpus_locked says whether we already hold cpu_hotplug_lock. | |
| */ | |
| int numa_update_cpu_topology(bool cpus_locked) | |
| { | |
| unsigned int cpu, sibling, changed = 0; | |
| struct topology_update_data *updates, *ud; | |
| __be32 associativity[VPHN_ASSOC_BUFSIZE] = {0}; | |
| cpumask_t updated_cpus; | |
| struct device *dev; | |
| int weight, new_nid, i = 0; | |
| if (!prrn_enabled && !vphn_enabled) { | |
| if (!topology_inited) | |
| topology_update_needed = 1; | |
| return 0; | |
| } | |
| weight = cpumask_weight(&cpu_associativity_changes_mask); | |
| if (!weight) | |
| return 0; | |
| updates = kzalloc(weight * (sizeof(*updates)), GFP_KERNEL); | |
| if (!updates) | |
| return 0; | |
| cpumask_clear(&updated_cpus); | |
| for_each_cpu(cpu, &cpu_associativity_changes_mask) { | |
| /* | |
| * If siblings aren't flagged for changes, updates list | |
| * will be too short. Skip on this update and set for next | |
| * update. | |
| */ | |
| if (!cpumask_subset(cpu_sibling_mask(cpu), | |
| &cpu_associativity_changes_mask)) { | |
| pr_info("Sibling bits not set for associativity " | |
| "change, cpu%d\n", cpu); | |
| cpumask_or(&cpu_associativity_changes_mask, | |
| &cpu_associativity_changes_mask, | |
| cpu_sibling_mask(cpu)); | |
| cpu = cpu_last_thread_sibling(cpu); | |
| continue; | |
| } | |
| /* Use associativity from first thread for all siblings */ | |
| vphn_get_associativity(cpu, associativity); | |
| new_nid = associativity_to_nid(associativity); | |
| if (new_nid < 0 || !node_online(new_nid)) | |
| new_nid = first_online_node; | |
| if (new_nid == numa_cpu_lookup_table[cpu]) { | |
| cpumask_andnot(&cpu_associativity_changes_mask, | |
| &cpu_associativity_changes_mask, | |
| cpu_sibling_mask(cpu)); | |
| dbg("Assoc chg gives same node %d for cpu%d\n", | |
| new_nid, cpu); | |
| cpu = cpu_last_thread_sibling(cpu); | |
| continue; | |
| } | |
| for_each_cpu(sibling, cpu_sibling_mask(cpu)) { | |
| ud = &updates[i++]; | |
| ud->next = &updates[i]; | |
| ud->cpu = sibling; | |
| ud->new_nid = new_nid; | |
| ud->old_nid = numa_cpu_lookup_table[sibling]; | |
| cpumask_set_cpu(sibling, &updated_cpus); | |
| } | |
| cpu = cpu_last_thread_sibling(cpu); | |
| } | |
| /* | |
| * Prevent processing of 'updates' from overflowing array | |
| * where last entry filled in a 'next' pointer. | |
| */ | |
| if (i) | |
| updates[i-1].next = NULL; | |
| pr_debug("Topology update for the following CPUs:\n"); | |
| if (cpumask_weight(&updated_cpus)) { | |
| for (ud = &updates[0]; ud; ud = ud->next) { | |
| pr_debug("cpu %d moving from node %d " | |
| "to %d\n", ud->cpu, | |
| ud->old_nid, ud->new_nid); | |
| } | |
| } | |
| /* | |
| * In cases where we have nothing to update (because the updates list | |
| * is too short or because the new topology is same as the old one), | |
| * skip invoking update_cpu_topology() via stop-machine(). This is | |
| * necessary (and not just a fast-path optimization) since stop-machine | |
| * can end up electing a random CPU to run update_cpu_topology(), and | |
| * thus trick us into setting up incorrect cpu-node mappings (since | |
| * 'updates' is kzalloc()'ed). | |
| * | |
| * And for the similar reason, we will skip all the following updating. | |
| */ | |
| if (!cpumask_weight(&updated_cpus)) | |
| goto out; | |
| if (cpus_locked) | |
| stop_machine_cpuslocked(update_cpu_topology, &updates[0], | |
| &updated_cpus); | |
| else | |
| stop_machine(update_cpu_topology, &updates[0], &updated_cpus); | |
| /* | |
| * Update the numa-cpu lookup table with the new mappings, even for | |
| * offline CPUs. It is best to perform this update from the stop- | |
| * machine context. | |
| */ | |
| if (cpus_locked) | |
| stop_machine_cpuslocked(update_lookup_table, &updates[0], | |
| cpumask_of(raw_smp_processor_id())); | |
| else | |
| stop_machine(update_lookup_table, &updates[0], | |
| cpumask_of(raw_smp_processor_id())); | |
| for (ud = &updates[0]; ud; ud = ud->next) { | |
| unregister_cpu_under_node(ud->cpu, ud->old_nid); | |
| register_cpu_under_node(ud->cpu, ud->new_nid); | |
| dev = get_cpu_device(ud->cpu); | |
| if (dev) | |
| kobject_uevent(&dev->kobj, KOBJ_CHANGE); | |
| cpumask_clear_cpu(ud->cpu, &cpu_associativity_changes_mask); | |
| changed = 1; | |
| } | |
| out: | |
| kfree(updates); | |
| topology_update_needed = 0; | |
| return changed; | |
| } | |
| int arch_update_cpu_topology(void) | |
| { | |
| return numa_update_cpu_topology(true); | |
| } | |
| static void topology_work_fn(struct work_struct *work) | |
| { | |
| rebuild_sched_domains(); | |
| } | |
| static DECLARE_WORK(topology_work, topology_work_fn); | |
| static void topology_schedule_update(void) | |
| { | |
| schedule_work(&topology_work); | |
| } | |
| static void topology_timer_fn(struct timer_list *unused) | |
| { | |
| if (prrn_enabled && cpumask_weight(&cpu_associativity_changes_mask)) | |
| topology_schedule_update(); | |
| else if (vphn_enabled) { | |
| if (update_cpu_associativity_changes_mask() > 0) | |
| topology_schedule_update(); | |
| reset_topology_timer(); | |
| } | |
| } | |
| static struct timer_list topology_timer; | |
| static void reset_topology_timer(void) | |
| { | |
| mod_timer(&topology_timer, jiffies + topology_timer_secs * HZ); | |
| } | |
| #ifdef CONFIG_SMP | |
| static void stage_topology_update(int core_id) | |
| { | |
| cpumask_or(&cpu_associativity_changes_mask, | |
| &cpu_associativity_changes_mask, cpu_sibling_mask(core_id)); | |
| reset_topology_timer(); | |
| } | |
| static int dt_update_callback(struct notifier_block *nb, | |
| unsigned long action, void *data) | |
| { | |
| struct of_reconfig_data *update = data; | |
| int rc = NOTIFY_DONE; | |
| switch (action) { | |
| case OF_RECONFIG_UPDATE_PROPERTY: | |
| if (!of_prop_cmp(update->dn->type, "cpu") && | |
| !of_prop_cmp(update->prop->name, "ibm,associativity")) { | |
| u32 core_id; | |
| of_property_read_u32(update->dn, "reg", &core_id); | |
| stage_topology_update(core_id); | |
| rc = NOTIFY_OK; | |
| } | |
| break; | |
| } | |
| return rc; | |
| } | |
| static struct notifier_block dt_update_nb = { | |
| .notifier_call = dt_update_callback, | |
| }; | |
| #endif | |
| /* | |
| * Start polling for associativity changes. | |
| */ | |
| int start_topology_update(void) | |
| { | |
| int rc = 0; | |
| if (firmware_has_feature(FW_FEATURE_PRRN)) { | |
| if (!prrn_enabled) { | |
| prrn_enabled = 1; | |
| #ifdef CONFIG_SMP | |
| rc = of_reconfig_notifier_register(&dt_update_nb); | |
| #endif | |
| } | |
| } | |
| if (firmware_has_feature(FW_FEATURE_VPHN) && | |
| lppaca_shared_proc(get_lppaca())) { | |
| if (!vphn_enabled) { | |
| vphn_enabled = 1; | |
| setup_cpu_associativity_change_counters(); | |
| timer_setup(&topology_timer, topology_timer_fn, | |
| TIMER_DEFERRABLE); | |
| reset_topology_timer(); | |
| } | |
| } | |
| return rc; | |
| } | |
| /* | |
| * Disable polling for VPHN associativity changes. | |
| */ | |
| int stop_topology_update(void) | |
| { | |
| int rc = 0; | |
| if (prrn_enabled) { | |
| prrn_enabled = 0; | |
| #ifdef CONFIG_SMP | |
| rc = of_reconfig_notifier_unregister(&dt_update_nb); | |
| #endif | |
| } | |
| if (vphn_enabled) { | |
| vphn_enabled = 0; | |
| rc = del_timer_sync(&topology_timer); | |
| } | |
| return rc; | |
| } | |
| int prrn_is_enabled(void) | |
| { | |
| return prrn_enabled; | |
| } | |
| static int topology_read(struct seq_file *file, void *v) | |
| { | |
| if (vphn_enabled || prrn_enabled) | |
| seq_puts(file, "on\n"); | |
| else | |
| seq_puts(file, "off\n"); | |
| return 0; | |
| } | |
| static int topology_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, topology_read, NULL); | |
| } | |
| static ssize_t topology_write(struct file *file, const char __user *buf, | |
| size_t count, loff_t *off) | |
| { | |
| char kbuf[4]; /* "on" or "off" plus null. */ | |
| int read_len; | |
| read_len = count < 3 ? count : 3; | |
| if (copy_from_user(kbuf, buf, read_len)) | |
| return -EINVAL; | |
| kbuf[read_len] = '\0'; | |
| if (!strncmp(kbuf, "on", 2)) | |
| start_topology_update(); | |
| else if (!strncmp(kbuf, "off", 3)) | |
| stop_topology_update(); | |
| else | |
| return -EINVAL; | |
| return count; | |
| } | |
| static const struct file_operations topology_ops = { | |
| .read = seq_read, | |
| .write = topology_write, | |
| .open = topology_open, | |
| .release = single_release | |
| }; | |
| static int topology_update_init(void) | |
| { | |
| /* Do not poll for changes if disabled at boot */ | |
| if (topology_updates_enabled) | |
| start_topology_update(); | |
| if (vphn_enabled) | |
| topology_schedule_update(); | |
| if (!proc_create("powerpc/topology_updates", 0644, NULL, &topology_ops)) | |
| return -ENOMEM; | |
| topology_inited = 1; | |
| if (topology_update_needed) | |
| bitmap_fill(cpumask_bits(&cpu_associativity_changes_mask), | |
| nr_cpumask_bits); | |
| return 0; | |
| } | |
| device_initcall(topology_update_init); | |
| #endif /* CONFIG_PPC_SPLPAR */ |