| /* | |
| * Copyright (C) 2012 Regents of the University of California | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation, version 2. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #ifndef _ASM_RISCV_BITOPS_H | |
| #define _ASM_RISCV_BITOPS_H | |
| #ifndef _LINUX_BITOPS_H | |
| #error "Only <linux/bitops.h> can be included directly" | |
| #endif /* _LINUX_BITOPS_H */ | |
| #include <linux/compiler.h> | |
| #include <linux/irqflags.h> | |
| #include <asm/barrier.h> | |
| #include <asm/bitsperlong.h> | |
| #ifndef smp_mb__before_clear_bit | |
| #define smp_mb__before_clear_bit() smp_mb() | |
| #define smp_mb__after_clear_bit() smp_mb() | |
| #endif /* smp_mb__before_clear_bit */ | |
| #include <asm-generic/bitops/__ffs.h> | |
| #include <asm-generic/bitops/ffz.h> | |
| #include <asm-generic/bitops/fls.h> | |
| #include <asm-generic/bitops/__fls.h> | |
| #include <asm-generic/bitops/fls64.h> | |
| #include <asm-generic/bitops/find.h> | |
| #include <asm-generic/bitops/sched.h> | |
| #include <asm-generic/bitops/ffs.h> | |
| #include <asm-generic/bitops/hweight.h> | |
| #if (BITS_PER_LONG == 64) | |
| #define __AMO(op) "amo" #op ".d" | |
| #elif (BITS_PER_LONG == 32) | |
| #define __AMO(op) "amo" #op ".w" | |
| #else | |
| #error "Unexpected BITS_PER_LONG" | |
| #endif | |
| #define __test_and_op_bit_ord(op, mod, nr, addr, ord) \ | |
| ({ \ | |
| unsigned long __res, __mask; \ | |
| __mask = BIT_MASK(nr); \ | |
| __asm__ __volatile__ ( \ | |
| __AMO(op) #ord " %0, %2, %1" \ | |
| : "=r" (__res), "+A" (addr[BIT_WORD(nr)]) \ | |
| : "r" (mod(__mask)) \ | |
| : "memory"); \ | |
| ((__res & __mask) != 0); \ | |
| }) | |
| #define __op_bit_ord(op, mod, nr, addr, ord) \ | |
| __asm__ __volatile__ ( \ | |
| __AMO(op) #ord " zero, %1, %0" \ | |
| : "+A" (addr[BIT_WORD(nr)]) \ | |
| : "r" (mod(BIT_MASK(nr))) \ | |
| : "memory"); | |
| #define __test_and_op_bit(op, mod, nr, addr) \ | |
| __test_and_op_bit_ord(op, mod, nr, addr, .aqrl) | |
| #define __op_bit(op, mod, nr, addr) \ | |
| __op_bit_ord(op, mod, nr, addr, ) | |
| /* Bitmask modifiers */ | |
| #define __NOP(x) (x) | |
| #define __NOT(x) (~(x)) | |
| /** | |
| * test_and_set_bit - Set a bit and return its old value | |
| * @nr: Bit to set | |
| * @addr: Address to count from | |
| * | |
| * This operation may be reordered on other architectures than x86. | |
| */ | |
| static inline int test_and_set_bit(int nr, volatile unsigned long *addr) | |
| { | |
| return __test_and_op_bit(or, __NOP, nr, addr); | |
| } | |
| /** | |
| * test_and_clear_bit - Clear a bit and return its old value | |
| * @nr: Bit to clear | |
| * @addr: Address to count from | |
| * | |
| * This operation can be reordered on other architectures other than x86. | |
| */ | |
| static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) | |
| { | |
| return __test_and_op_bit(and, __NOT, nr, addr); | |
| } | |
| /** | |
| * test_and_change_bit - Change a bit and return its old value | |
| * @nr: Bit to change | |
| * @addr: Address to count from | |
| * | |
| * This operation is atomic and cannot be reordered. | |
| * It also implies a memory barrier. | |
| */ | |
| static inline int test_and_change_bit(int nr, volatile unsigned long *addr) | |
| { | |
| return __test_and_op_bit(xor, __NOP, nr, addr); | |
| } | |
| /** | |
| * set_bit - Atomically set a bit in memory | |
| * @nr: the bit to set | |
| * @addr: the address to start counting from | |
| * | |
| * Note: there are no guarantees that this function will not be reordered | |
| * on non x86 architectures, so if you are writing portable code, | |
| * make sure not to rely on its reordering guarantees. | |
| * | |
| * Note that @nr may be almost arbitrarily large; this function is not | |
| * restricted to acting on a single-word quantity. | |
| */ | |
| static inline void set_bit(int nr, volatile unsigned long *addr) | |
| { | |
| __op_bit(or, __NOP, nr, addr); | |
| } | |
| /** | |
| * clear_bit - Clears a bit in memory | |
| * @nr: Bit to clear | |
| * @addr: Address to start counting from | |
| * | |
| * Note: there are no guarantees that this function will not be reordered | |
| * on non x86 architectures, so if you are writing portable code, | |
| * make sure not to rely on its reordering guarantees. | |
| */ | |
| static inline void clear_bit(int nr, volatile unsigned long *addr) | |
| { | |
| __op_bit(and, __NOT, nr, addr); | |
| } | |
| /** | |
| * change_bit - Toggle a bit in memory | |
| * @nr: Bit to change | |
| * @addr: Address to start counting from | |
| * | |
| * change_bit() may be reordered on other architectures than x86. | |
| * Note that @nr may be almost arbitrarily large; this function is not | |
| * restricted to acting on a single-word quantity. | |
| */ | |
| static inline void change_bit(int nr, volatile unsigned long *addr) | |
| { | |
| __op_bit(xor, __NOP, nr, addr); | |
| } | |
| /** | |
| * test_and_set_bit_lock - Set a bit and return its old value, for lock | |
| * @nr: Bit to set | |
| * @addr: Address to count from | |
| * | |
| * This operation is atomic and provides acquire barrier semantics. | |
| * It can be used to implement bit locks. | |
| */ | |
| static inline int test_and_set_bit_lock( | |
| unsigned long nr, volatile unsigned long *addr) | |
| { | |
| return __test_and_op_bit_ord(or, __NOP, nr, addr, .aq); | |
| } | |
| /** | |
| * clear_bit_unlock - Clear a bit in memory, for unlock | |
| * @nr: the bit to set | |
| * @addr: the address to start counting from | |
| * | |
| * This operation is atomic and provides release barrier semantics. | |
| */ | |
| static inline void clear_bit_unlock( | |
| unsigned long nr, volatile unsigned long *addr) | |
| { | |
| __op_bit_ord(and, __NOT, nr, addr, .rl); | |
| } | |
| /** | |
| * __clear_bit_unlock - Clear a bit in memory, for unlock | |
| * @nr: the bit to set | |
| * @addr: the address to start counting from | |
| * | |
| * This operation is like clear_bit_unlock, however it is not atomic. | |
| * It does provide release barrier semantics so it can be used to unlock | |
| * a bit lock, however it would only be used if no other CPU can modify | |
| * any bits in the memory until the lock is released (a good example is | |
| * if the bit lock itself protects access to the other bits in the word). | |
| * | |
| * On RISC-V systems there seems to be no benefit to taking advantage of the | |
| * non-atomic property here: it's a lot more instructions and we still have to | |
| * provide release semantics anyway. | |
| */ | |
| static inline void __clear_bit_unlock( | |
| unsigned long nr, volatile unsigned long *addr) | |
| { | |
| clear_bit_unlock(nr, addr); | |
| } | |
| #undef __test_and_op_bit | |
| #undef __op_bit | |
| #undef __NOP | |
| #undef __NOT | |
| #undef __AMO | |
| #include <asm-generic/bitops/non-atomic.h> | |
| #include <asm-generic/bitops/le.h> | |
| #include <asm-generic/bitops/ext2-atomic.h> | |
| #endif /* _ASM_RISCV_BITOPS_H */ |