| /* | |
| * Copyright 2012-16 Advanced Micro Devices, Inc. | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be included in | |
| * all copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR | |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, | |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
| * OTHER DEALINGS IN THE SOFTWARE. | |
| * | |
| * Authors: AMD | |
| * | |
| */ | |
| #include "dce_clocks.h" | |
| #include "dm_services.h" | |
| #include "reg_helper.h" | |
| #include "fixed32_32.h" | |
| #include "bios_parser_interface.h" | |
| #include "dc.h" | |
| #include "dce_abm.h" | |
| #include "dmcu.h" | |
| #if defined(CONFIG_DRM_AMD_DC_DCN1_0) | |
| #include "dcn_calcs.h" | |
| #endif | |
| #include "core_types.h" | |
| #define TO_DCE_CLOCKS(clocks)\ | |
| container_of(clocks, struct dce_disp_clk, base) | |
| #define REG(reg) \ | |
| (clk_dce->regs->reg) | |
| #undef FN | |
| #define FN(reg_name, field_name) \ | |
| clk_dce->clk_shift->field_name, clk_dce->clk_mask->field_name | |
| #define CTX \ | |
| clk_dce->base.ctx | |
| /* Max clock values for each state indexed by "enum clocks_state": */ | |
| static const struct state_dependent_clocks dce80_max_clks_by_state[] = { | |
| /* ClocksStateInvalid - should not be used */ | |
| { .display_clk_khz = 0, .pixel_clk_khz = 0 }, | |
| /* ClocksStateUltraLow - not expected to be used for DCE 8.0 */ | |
| { .display_clk_khz = 0, .pixel_clk_khz = 0 }, | |
| /* ClocksStateLow */ | |
| { .display_clk_khz = 352000, .pixel_clk_khz = 330000}, | |
| /* ClocksStateNominal */ | |
| { .display_clk_khz = 600000, .pixel_clk_khz = 400000 }, | |
| /* ClocksStatePerformance */ | |
| { .display_clk_khz = 600000, .pixel_clk_khz = 400000 } }; | |
| static const struct state_dependent_clocks dce110_max_clks_by_state[] = { | |
| /*ClocksStateInvalid - should not be used*/ | |
| { .display_clk_khz = 0, .pixel_clk_khz = 0 }, | |
| /*ClocksStateUltraLow - currently by HW design team not supposed to be used*/ | |
| { .display_clk_khz = 352000, .pixel_clk_khz = 330000 }, | |
| /*ClocksStateLow*/ | |
| { .display_clk_khz = 352000, .pixel_clk_khz = 330000 }, | |
| /*ClocksStateNominal*/ | |
| { .display_clk_khz = 467000, .pixel_clk_khz = 400000 }, | |
| /*ClocksStatePerformance*/ | |
| { .display_clk_khz = 643000, .pixel_clk_khz = 400000 } }; | |
| static const struct state_dependent_clocks dce112_max_clks_by_state[] = { | |
| /*ClocksStateInvalid - should not be used*/ | |
| { .display_clk_khz = 0, .pixel_clk_khz = 0 }, | |
| /*ClocksStateUltraLow - currently by HW design team not supposed to be used*/ | |
| { .display_clk_khz = 389189, .pixel_clk_khz = 346672 }, | |
| /*ClocksStateLow*/ | |
| { .display_clk_khz = 459000, .pixel_clk_khz = 400000 }, | |
| /*ClocksStateNominal*/ | |
| { .display_clk_khz = 667000, .pixel_clk_khz = 600000 }, | |
| /*ClocksStatePerformance*/ | |
| { .display_clk_khz = 1132000, .pixel_clk_khz = 600000 } }; | |
| static const struct state_dependent_clocks dce120_max_clks_by_state[] = { | |
| /*ClocksStateInvalid - should not be used*/ | |
| { .display_clk_khz = 0, .pixel_clk_khz = 0 }, | |
| /*ClocksStateUltraLow - currently by HW design team not supposed to be used*/ | |
| { .display_clk_khz = 0, .pixel_clk_khz = 0 }, | |
| /*ClocksStateLow*/ | |
| { .display_clk_khz = 460000, .pixel_clk_khz = 400000 }, | |
| /*ClocksStateNominal*/ | |
| { .display_clk_khz = 670000, .pixel_clk_khz = 600000 }, | |
| /*ClocksStatePerformance*/ | |
| { .display_clk_khz = 1133000, .pixel_clk_khz = 600000 } }; | |
| /* Starting point for each divider range.*/ | |
| enum dce_divider_range_start { | |
| DIVIDER_RANGE_01_START = 200, /* 2.00*/ | |
| DIVIDER_RANGE_02_START = 1600, /* 16.00*/ | |
| DIVIDER_RANGE_03_START = 3200, /* 32.00*/ | |
| DIVIDER_RANGE_SCALE_FACTOR = 100 /* Results are scaled up by 100.*/ | |
| }; | |
| /* Ranges for divider identifiers (Divider ID or DID) | |
| mmDENTIST_DISPCLK_CNTL.DENTIST_DISPCLK_WDIVIDER*/ | |
| enum dce_divider_id_register_setting { | |
| DIVIDER_RANGE_01_BASE_DIVIDER_ID = 0X08, | |
| DIVIDER_RANGE_02_BASE_DIVIDER_ID = 0X40, | |
| DIVIDER_RANGE_03_BASE_DIVIDER_ID = 0X60, | |
| DIVIDER_RANGE_MAX_DIVIDER_ID = 0X80 | |
| }; | |
| /* Step size between each divider within a range. | |
| Incrementing the DENTIST_DISPCLK_WDIVIDER by one | |
| will increment the divider by this much.*/ | |
| enum dce_divider_range_step_size { | |
| DIVIDER_RANGE_01_STEP_SIZE = 25, /* 0.25*/ | |
| DIVIDER_RANGE_02_STEP_SIZE = 50, /* 0.50*/ | |
| DIVIDER_RANGE_03_STEP_SIZE = 100 /* 1.00 */ | |
| }; | |
| static bool dce_divider_range_construct( | |
| struct dce_divider_range *div_range, | |
| int range_start, | |
| int range_step, | |
| int did_min, | |
| int did_max) | |
| { | |
| div_range->div_range_start = range_start; | |
| div_range->div_range_step = range_step; | |
| div_range->did_min = did_min; | |
| div_range->did_max = did_max; | |
| if (div_range->div_range_step == 0) { | |
| div_range->div_range_step = 1; | |
| /*div_range_step cannot be zero*/ | |
| BREAK_TO_DEBUGGER(); | |
| } | |
| /* Calculate this based on the other inputs.*/ | |
| /* See DividerRange.h for explanation of */ | |
| /* the relationship between divider id (DID) and a divider.*/ | |
| /* Number of Divider IDs = (Maximum Divider ID - Minimum Divider ID)*/ | |
| /* Maximum divider identified in this range = | |
| * (Number of Divider IDs)*Step size between dividers | |
| * + The start of this range.*/ | |
| div_range->div_range_end = (did_max - did_min) * range_step | |
| + range_start; | |
| return true; | |
| } | |
| static int dce_divider_range_calc_divider( | |
| struct dce_divider_range *div_range, | |
| int did) | |
| { | |
| /* Is this DID within our range?*/ | |
| if ((did < div_range->did_min) || (did >= div_range->did_max)) | |
| return INVALID_DIVIDER; | |
| return ((did - div_range->did_min) * div_range->div_range_step) | |
| + div_range->div_range_start; | |
| } | |
| static int dce_divider_range_get_divider( | |
| struct dce_divider_range *div_range, | |
| int ranges_num, | |
| int did) | |
| { | |
| int div = INVALID_DIVIDER; | |
| int i; | |
| for (i = 0; i < ranges_num; i++) { | |
| /* Calculate divider with given divider ID*/ | |
| div = dce_divider_range_calc_divider(&div_range[i], did); | |
| /* Found a valid return divider*/ | |
| if (div != INVALID_DIVIDER) | |
| break; | |
| } | |
| return div; | |
| } | |
| static int dce_clocks_get_dp_ref_freq(struct display_clock *clk) | |
| { | |
| struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk); | |
| int dprefclk_wdivider; | |
| int dprefclk_src_sel; | |
| int dp_ref_clk_khz = 600000; | |
| int target_div = INVALID_DIVIDER; | |
| /* ASSERT DP Reference Clock source is from DFS*/ | |
| REG_GET(DPREFCLK_CNTL, DPREFCLK_SRC_SEL, &dprefclk_src_sel); | |
| ASSERT(dprefclk_src_sel == 0); | |
| /* Read the mmDENTIST_DISPCLK_CNTL to get the currently | |
| * programmed DID DENTIST_DPREFCLK_WDIVIDER*/ | |
| REG_GET(DENTIST_DISPCLK_CNTL, DENTIST_DPREFCLK_WDIVIDER, &dprefclk_wdivider); | |
| /* Convert DENTIST_DPREFCLK_WDIVIDERto actual divider*/ | |
| target_div = dce_divider_range_get_divider( | |
| clk_dce->divider_ranges, | |
| DIVIDER_RANGE_MAX, | |
| dprefclk_wdivider); | |
| if (target_div != INVALID_DIVIDER) { | |
| /* Calculate the current DFS clock, in kHz.*/ | |
| dp_ref_clk_khz = (DIVIDER_RANGE_SCALE_FACTOR | |
| * clk_dce->dentist_vco_freq_khz) / target_div; | |
| } | |
| /* SW will adjust DP REF Clock average value for all purposes | |
| * (DP DTO / DP Audio DTO and DP GTC) | |
| if clock is spread for all cases: | |
| -if SS enabled on DP Ref clock and HW de-spreading enabled with SW | |
| calculations for DS_INCR/DS_MODULO (this is planned to be default case) | |
| -if SS enabled on DP Ref clock and HW de-spreading enabled with HW | |
| calculations (not planned to be used, but average clock should still | |
| be valid) | |
| -if SS enabled on DP Ref clock and HW de-spreading disabled | |
| (should not be case with CIK) then SW should program all rates | |
| generated according to average value (case as with previous ASICs) | |
| */ | |
| if (clk_dce->ss_on_dprefclk && clk_dce->dprefclk_ss_divider != 0) { | |
| struct fixed32_32 ss_percentage = dal_fixed32_32_div_int( | |
| dal_fixed32_32_from_fraction( | |
| clk_dce->dprefclk_ss_percentage, | |
| clk_dce->dprefclk_ss_divider), 200); | |
| struct fixed32_32 adj_dp_ref_clk_khz; | |
| ss_percentage = dal_fixed32_32_sub(dal_fixed32_32_one, | |
| ss_percentage); | |
| adj_dp_ref_clk_khz = | |
| dal_fixed32_32_mul_int( | |
| ss_percentage, | |
| dp_ref_clk_khz); | |
| dp_ref_clk_khz = dal_fixed32_32_floor(adj_dp_ref_clk_khz); | |
| } | |
| return dp_ref_clk_khz; | |
| } | |
| /* TODO: This is DCN DPREFCLK: it could be program by DENTIST by VBIOS | |
| * or CLK0_CLK11 by SMU. For DCE120, it is wlays 600Mhz. Will re-visit | |
| * clock implementation | |
| */ | |
| static int dce_clocks_get_dp_ref_freq_wrkaround(struct display_clock *clk) | |
| { | |
| struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk); | |
| int dp_ref_clk_khz = 600000; | |
| if (clk_dce->ss_on_dprefclk && clk_dce->dprefclk_ss_divider != 0) { | |
| struct fixed32_32 ss_percentage = dal_fixed32_32_div_int( | |
| dal_fixed32_32_from_fraction( | |
| clk_dce->dprefclk_ss_percentage, | |
| clk_dce->dprefclk_ss_divider), 200); | |
| struct fixed32_32 adj_dp_ref_clk_khz; | |
| ss_percentage = dal_fixed32_32_sub(dal_fixed32_32_one, | |
| ss_percentage); | |
| adj_dp_ref_clk_khz = | |
| dal_fixed32_32_mul_int( | |
| ss_percentage, | |
| dp_ref_clk_khz); | |
| dp_ref_clk_khz = dal_fixed32_32_floor(adj_dp_ref_clk_khz); | |
| } | |
| return dp_ref_clk_khz; | |
| } | |
| static enum dm_pp_clocks_state dce_get_required_clocks_state( | |
| struct display_clock *clk, | |
| struct state_dependent_clocks *req_clocks) | |
| { | |
| struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk); | |
| int i; | |
| enum dm_pp_clocks_state low_req_clk; | |
| /* Iterate from highest supported to lowest valid state, and update | |
| * lowest RequiredState with the lowest state that satisfies | |
| * all required clocks | |
| */ | |
| for (i = clk->max_clks_state; i >= DM_PP_CLOCKS_STATE_ULTRA_LOW; i--) | |
| if (req_clocks->display_clk_khz > | |
| clk_dce->max_clks_by_state[i].display_clk_khz | |
| || req_clocks->pixel_clk_khz > | |
| clk_dce->max_clks_by_state[i].pixel_clk_khz) | |
| break; | |
| low_req_clk = i + 1; | |
| if (low_req_clk > clk->max_clks_state) { | |
| dm_logger_write(clk->ctx->logger, LOG_WARNING, | |
| "%s: clocks unsupported", __func__); | |
| low_req_clk = DM_PP_CLOCKS_STATE_INVALID; | |
| } | |
| return low_req_clk; | |
| } | |
| static bool dce_clock_set_min_clocks_state( | |
| struct display_clock *clk, | |
| enum dm_pp_clocks_state clocks_state) | |
| { | |
| struct dm_pp_power_level_change_request level_change_req = { | |
| clocks_state }; | |
| if (clocks_state > clk->max_clks_state) { | |
| /*Requested state exceeds max supported state.*/ | |
| dm_logger_write(clk->ctx->logger, LOG_WARNING, | |
| "Requested state exceeds max supported state"); | |
| return false; | |
| } else if (clocks_state == clk->cur_min_clks_state) { | |
| /*if we're trying to set the same state, we can just return | |
| * since nothing needs to be done*/ | |
| return true; | |
| } | |
| /* get max clock state from PPLIB */ | |
| if (dm_pp_apply_power_level_change_request(clk->ctx, &level_change_req)) | |
| clk->cur_min_clks_state = clocks_state; | |
| return true; | |
| } | |
| static int dce_set_clock( | |
| struct display_clock *clk, | |
| int requested_clk_khz) | |
| { | |
| struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk); | |
| struct bp_pixel_clock_parameters pxl_clk_params = { 0 }; | |
| struct dc_bios *bp = clk->ctx->dc_bios; | |
| int actual_clock = requested_clk_khz; | |
| /* Make sure requested clock isn't lower than minimum threshold*/ | |
| if (requested_clk_khz > 0) | |
| requested_clk_khz = max(requested_clk_khz, | |
| clk_dce->dentist_vco_freq_khz / 64); | |
| /* Prepare to program display clock*/ | |
| pxl_clk_params.target_pixel_clock = requested_clk_khz; | |
| pxl_clk_params.pll_id = CLOCK_SOURCE_ID_DFS; | |
| bp->funcs->program_display_engine_pll(bp, &pxl_clk_params); | |
| if (clk_dce->dfs_bypass_enabled) { | |
| /* Cache the fixed display clock*/ | |
| clk_dce->dfs_bypass_disp_clk = | |
| pxl_clk_params.dfs_bypass_display_clock; | |
| actual_clock = pxl_clk_params.dfs_bypass_display_clock; | |
| } | |
| /* from power down, we need mark the clock state as ClocksStateNominal | |
| * from HWReset, so when resume we will call pplib voltage regulator.*/ | |
| if (requested_clk_khz == 0) | |
| clk->cur_min_clks_state = DM_PP_CLOCKS_STATE_NOMINAL; | |
| return actual_clock; | |
| } | |
| static int dce_psr_set_clock( | |
| struct display_clock *clk, | |
| int requested_clk_khz) | |
| { | |
| struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk); | |
| struct dc_context *ctx = clk_dce->base.ctx; | |
| struct dc *core_dc = ctx->dc; | |
| struct dmcu *dmcu = core_dc->res_pool->dmcu; | |
| int actual_clk_khz = requested_clk_khz; | |
| actual_clk_khz = dce_set_clock(clk, requested_clk_khz); | |
| dmcu->funcs->set_psr_wait_loop(dmcu, actual_clk_khz / 1000 / 7); | |
| return actual_clk_khz; | |
| } | |
| static int dce112_set_clock( | |
| struct display_clock *clk, | |
| int requested_clk_khz) | |
| { | |
| struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk); | |
| struct bp_set_dce_clock_parameters dce_clk_params; | |
| struct dc_bios *bp = clk->ctx->dc_bios; | |
| struct dc *core_dc = clk->ctx->dc; | |
| struct abm *abm = core_dc->res_pool->abm; | |
| struct dmcu *dmcu = core_dc->res_pool->dmcu; | |
| int actual_clock = requested_clk_khz; | |
| /* Prepare to program display clock*/ | |
| memset(&dce_clk_params, 0, sizeof(dce_clk_params)); | |
| /* Make sure requested clock isn't lower than minimum threshold*/ | |
| if (requested_clk_khz > 0) | |
| requested_clk_khz = max(requested_clk_khz, | |
| clk_dce->dentist_vco_freq_khz / 62); | |
| dce_clk_params.target_clock_frequency = requested_clk_khz; | |
| dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS; | |
| dce_clk_params.clock_type = DCECLOCK_TYPE_DISPLAY_CLOCK; | |
| bp->funcs->set_dce_clock(bp, &dce_clk_params); | |
| actual_clock = dce_clk_params.target_clock_frequency; | |
| /* from power down, we need mark the clock state as ClocksStateNominal | |
| * from HWReset, so when resume we will call pplib voltage regulator.*/ | |
| if (requested_clk_khz == 0) | |
| clk->cur_min_clks_state = DM_PP_CLOCKS_STATE_NOMINAL; | |
| /*Program DP ref Clock*/ | |
| /*VBIOS will determine DPREFCLK frequency, so we don't set it*/ | |
| dce_clk_params.target_clock_frequency = 0; | |
| dce_clk_params.clock_type = DCECLOCK_TYPE_DPREFCLK; | |
| dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK = | |
| (dce_clk_params.pll_id == | |
| CLOCK_SOURCE_COMBO_DISPLAY_PLL0); | |
| bp->funcs->set_dce_clock(bp, &dce_clk_params); | |
| if (abm->funcs->is_dmcu_initialized(abm) && clk_dce->dfs_bypass_disp_clk != actual_clock) | |
| dmcu->funcs->set_psr_wait_loop(dmcu, | |
| actual_clock / 1000 / 7); | |
| clk_dce->dfs_bypass_disp_clk = actual_clock; | |
| return actual_clock; | |
| } | |
| static void dce_clock_read_integrated_info(struct dce_disp_clk *clk_dce) | |
| { | |
| struct dc_debug *debug = &clk_dce->base.ctx->dc->debug; | |
| struct dc_bios *bp = clk_dce->base.ctx->dc_bios; | |
| struct integrated_info info = { { { 0 } } }; | |
| struct dc_firmware_info fw_info = { { 0 } }; | |
| int i; | |
| if (bp->integrated_info) | |
| info = *bp->integrated_info; | |
| clk_dce->dentist_vco_freq_khz = info.dentist_vco_freq; | |
| if (clk_dce->dentist_vco_freq_khz == 0) { | |
| bp->funcs->get_firmware_info(bp, &fw_info); | |
| clk_dce->dentist_vco_freq_khz = | |
| fw_info.smu_gpu_pll_output_freq; | |
| if (clk_dce->dentist_vco_freq_khz == 0) | |
| clk_dce->dentist_vco_freq_khz = 3600000; | |
| } | |
| /*update the maximum display clock for each power state*/ | |
| for (i = 0; i < NUMBER_OF_DISP_CLK_VOLTAGE; ++i) { | |
| enum dm_pp_clocks_state clk_state = DM_PP_CLOCKS_STATE_INVALID; | |
| switch (i) { | |
| case 0: | |
| clk_state = DM_PP_CLOCKS_STATE_ULTRA_LOW; | |
| break; | |
| case 1: | |
| clk_state = DM_PP_CLOCKS_STATE_LOW; | |
| break; | |
| case 2: | |
| clk_state = DM_PP_CLOCKS_STATE_NOMINAL; | |
| break; | |
| case 3: | |
| clk_state = DM_PP_CLOCKS_STATE_PERFORMANCE; | |
| break; | |
| default: | |
| clk_state = DM_PP_CLOCKS_STATE_INVALID; | |
| break; | |
| } | |
| /*Do not allow bad VBIOS/SBIOS to override with invalid values, | |
| * check for > 100MHz*/ | |
| if (info.disp_clk_voltage[i].max_supported_clk >= 100000) | |
| clk_dce->max_clks_by_state[clk_state].display_clk_khz = | |
| info.disp_clk_voltage[i].max_supported_clk; | |
| } | |
| if (!debug->disable_dfs_bypass && bp->integrated_info) | |
| if (bp->integrated_info->gpu_cap_info & DFS_BYPASS_ENABLE) | |
| clk_dce->dfs_bypass_enabled = true; | |
| clk_dce->use_max_disp_clk = debug->max_disp_clk; | |
| } | |
| static void dce_clock_read_ss_info(struct dce_disp_clk *clk_dce) | |
| { | |
| struct dc_bios *bp = clk_dce->base.ctx->dc_bios; | |
| int ss_info_num = bp->funcs->get_ss_entry_number( | |
| bp, AS_SIGNAL_TYPE_GPU_PLL); | |
| if (ss_info_num) { | |
| struct spread_spectrum_info info = { { 0 } }; | |
| enum bp_result result = bp->funcs->get_spread_spectrum_info( | |
| bp, AS_SIGNAL_TYPE_GPU_PLL, 0, &info); | |
| /* Based on VBIOS, VBIOS will keep entry for GPU PLL SS | |
| * even if SS not enabled and in that case | |
| * SSInfo.spreadSpectrumPercentage !=0 would be sign | |
| * that SS is enabled | |
| */ | |
| if (result == BP_RESULT_OK && | |
| info.spread_spectrum_percentage != 0) { | |
| clk_dce->ss_on_dprefclk = true; | |
| clk_dce->dprefclk_ss_divider = info.spread_percentage_divider; | |
| if (info.type.CENTER_MODE == 0) { | |
| /* TODO: Currently for DP Reference clock we | |
| * need only SS percentage for | |
| * downspread */ | |
| clk_dce->dprefclk_ss_percentage = | |
| info.spread_spectrum_percentage; | |
| } | |
| return; | |
| } | |
| result = bp->funcs->get_spread_spectrum_info( | |
| bp, AS_SIGNAL_TYPE_DISPLAY_PORT, 0, &info); | |
| /* Based on VBIOS, VBIOS will keep entry for DPREFCLK SS | |
| * even if SS not enabled and in that case | |
| * SSInfo.spreadSpectrumPercentage !=0 would be sign | |
| * that SS is enabled | |
| */ | |
| if (result == BP_RESULT_OK && | |
| info.spread_spectrum_percentage != 0) { | |
| clk_dce->ss_on_dprefclk = true; | |
| clk_dce->dprefclk_ss_divider = info.spread_percentage_divider; | |
| if (info.type.CENTER_MODE == 0) { | |
| /* Currently for DP Reference clock we | |
| * need only SS percentage for | |
| * downspread */ | |
| clk_dce->dprefclk_ss_percentage = | |
| info.spread_spectrum_percentage; | |
| } | |
| } | |
| } | |
| } | |
| static bool dce_apply_clock_voltage_request( | |
| struct display_clock *clk, | |
| enum dm_pp_clock_type clocks_type, | |
| int clocks_in_khz, | |
| bool pre_mode_set, | |
| bool update_dp_phyclk) | |
| { | |
| bool send_request = false; | |
| struct dm_pp_clock_for_voltage_req clock_voltage_req = {0}; | |
| switch (clocks_type) { | |
| case DM_PP_CLOCK_TYPE_DISPLAY_CLK: | |
| case DM_PP_CLOCK_TYPE_PIXELCLK: | |
| case DM_PP_CLOCK_TYPE_DISPLAYPHYCLK: | |
| break; | |
| default: | |
| BREAK_TO_DEBUGGER(); | |
| return false; | |
| } | |
| clock_voltage_req.clk_type = clocks_type; | |
| clock_voltage_req.clocks_in_khz = clocks_in_khz; | |
| /* to pplib */ | |
| if (pre_mode_set) { | |
| switch (clocks_type) { | |
| case DM_PP_CLOCK_TYPE_DISPLAY_CLK: | |
| if (clocks_in_khz > clk->cur_clocks_value.dispclk_in_khz) { | |
| clk->cur_clocks_value.dispclk_notify_pplib_done = true; | |
| send_request = true; | |
| } else | |
| clk->cur_clocks_value.dispclk_notify_pplib_done = false; | |
| /* no matter incrase or decrase clock, update current clock value */ | |
| clk->cur_clocks_value.dispclk_in_khz = clocks_in_khz; | |
| break; | |
| case DM_PP_CLOCK_TYPE_PIXELCLK: | |
| if (clocks_in_khz > clk->cur_clocks_value.max_pixelclk_in_khz) { | |
| clk->cur_clocks_value.pixelclk_notify_pplib_done = true; | |
| send_request = true; | |
| } else | |
| clk->cur_clocks_value.pixelclk_notify_pplib_done = false; | |
| /* no matter incrase or decrase clock, update current clock value */ | |
| clk->cur_clocks_value.max_pixelclk_in_khz = clocks_in_khz; | |
| break; | |
| case DM_PP_CLOCK_TYPE_DISPLAYPHYCLK: | |
| if (clocks_in_khz > clk->cur_clocks_value.max_non_dp_phyclk_in_khz) { | |
| clk->cur_clocks_value.phyclk_notigy_pplib_done = true; | |
| send_request = true; | |
| } else | |
| clk->cur_clocks_value.phyclk_notigy_pplib_done = false; | |
| /* no matter incrase or decrase clock, update current clock value */ | |
| clk->cur_clocks_value.max_non_dp_phyclk_in_khz = clocks_in_khz; | |
| break; | |
| default: | |
| ASSERT(0); | |
| break; | |
| } | |
| } else { | |
| switch (clocks_type) { | |
| case DM_PP_CLOCK_TYPE_DISPLAY_CLK: | |
| if (!clk->cur_clocks_value.dispclk_notify_pplib_done) | |
| send_request = true; | |
| break; | |
| case DM_PP_CLOCK_TYPE_PIXELCLK: | |
| if (!clk->cur_clocks_value.pixelclk_notify_pplib_done) | |
| send_request = true; | |
| break; | |
| case DM_PP_CLOCK_TYPE_DISPLAYPHYCLK: | |
| if (!clk->cur_clocks_value.phyclk_notigy_pplib_done) | |
| send_request = true; | |
| break; | |
| default: | |
| ASSERT(0); | |
| break; | |
| } | |
| } | |
| if (send_request) { | |
| #if defined(CONFIG_DRM_AMD_DC_DCN1_0) | |
| if (clk->ctx->dce_version >= DCN_VERSION_1_0) { | |
| struct dc *core_dc = clk->ctx->dc; | |
| /*use dcfclk request voltage*/ | |
| clock_voltage_req.clk_type = DM_PP_CLOCK_TYPE_DCFCLK; | |
| clock_voltage_req.clocks_in_khz = | |
| dcn_find_dcfclk_suits_all(core_dc, &clk->cur_clocks_value); | |
| } | |
| #endif | |
| dm_pp_apply_clock_for_voltage_request( | |
| clk->ctx, &clock_voltage_req); | |
| } | |
| if (update_dp_phyclk && (clocks_in_khz > | |
| clk->cur_clocks_value.max_dp_phyclk_in_khz)) | |
| clk->cur_clocks_value.max_dp_phyclk_in_khz = clocks_in_khz; | |
| return true; | |
| } | |
| static const struct display_clock_funcs dce120_funcs = { | |
| .get_dp_ref_clk_frequency = dce_clocks_get_dp_ref_freq_wrkaround, | |
| .apply_clock_voltage_request = dce_apply_clock_voltage_request, | |
| .set_clock = dce112_set_clock | |
| }; | |
| static const struct display_clock_funcs dce112_funcs = { | |
| .get_dp_ref_clk_frequency = dce_clocks_get_dp_ref_freq, | |
| .get_required_clocks_state = dce_get_required_clocks_state, | |
| .set_min_clocks_state = dce_clock_set_min_clocks_state, | |
| .set_clock = dce112_set_clock | |
| }; | |
| static const struct display_clock_funcs dce110_funcs = { | |
| .get_dp_ref_clk_frequency = dce_clocks_get_dp_ref_freq, | |
| .get_required_clocks_state = dce_get_required_clocks_state, | |
| .set_min_clocks_state = dce_clock_set_min_clocks_state, | |
| .set_clock = dce_psr_set_clock | |
| }; | |
| static const struct display_clock_funcs dce_funcs = { | |
| .get_dp_ref_clk_frequency = dce_clocks_get_dp_ref_freq, | |
| .get_required_clocks_state = dce_get_required_clocks_state, | |
| .set_min_clocks_state = dce_clock_set_min_clocks_state, | |
| .set_clock = dce_set_clock | |
| }; | |
| static void dce_disp_clk_construct( | |
| struct dce_disp_clk *clk_dce, | |
| struct dc_context *ctx, | |
| const struct dce_disp_clk_registers *regs, | |
| const struct dce_disp_clk_shift *clk_shift, | |
| const struct dce_disp_clk_mask *clk_mask) | |
| { | |
| struct display_clock *base = &clk_dce->base; | |
| base->ctx = ctx; | |
| base->funcs = &dce_funcs; | |
| clk_dce->regs = regs; | |
| clk_dce->clk_shift = clk_shift; | |
| clk_dce->clk_mask = clk_mask; | |
| clk_dce->dfs_bypass_disp_clk = 0; | |
| clk_dce->dprefclk_ss_percentage = 0; | |
| clk_dce->dprefclk_ss_divider = 1000; | |
| clk_dce->ss_on_dprefclk = false; | |
| base->max_clks_state = DM_PP_CLOCKS_STATE_NOMINAL; | |
| base->cur_min_clks_state = DM_PP_CLOCKS_STATE_INVALID; | |
| dce_clock_read_integrated_info(clk_dce); | |
| dce_clock_read_ss_info(clk_dce); | |
| dce_divider_range_construct( | |
| &clk_dce->divider_ranges[DIVIDER_RANGE_01], | |
| DIVIDER_RANGE_01_START, | |
| DIVIDER_RANGE_01_STEP_SIZE, | |
| DIVIDER_RANGE_01_BASE_DIVIDER_ID, | |
| DIVIDER_RANGE_02_BASE_DIVIDER_ID); | |
| dce_divider_range_construct( | |
| &clk_dce->divider_ranges[DIVIDER_RANGE_02], | |
| DIVIDER_RANGE_02_START, | |
| DIVIDER_RANGE_02_STEP_SIZE, | |
| DIVIDER_RANGE_02_BASE_DIVIDER_ID, | |
| DIVIDER_RANGE_03_BASE_DIVIDER_ID); | |
| dce_divider_range_construct( | |
| &clk_dce->divider_ranges[DIVIDER_RANGE_03], | |
| DIVIDER_RANGE_03_START, | |
| DIVIDER_RANGE_03_STEP_SIZE, | |
| DIVIDER_RANGE_03_BASE_DIVIDER_ID, | |
| DIVIDER_RANGE_MAX_DIVIDER_ID); | |
| } | |
| struct display_clock *dce_disp_clk_create( | |
| struct dc_context *ctx, | |
| const struct dce_disp_clk_registers *regs, | |
| const struct dce_disp_clk_shift *clk_shift, | |
| const struct dce_disp_clk_mask *clk_mask) | |
| { | |
| struct dce_disp_clk *clk_dce = kzalloc(sizeof(*clk_dce), GFP_KERNEL); | |
| if (clk_dce == NULL) { | |
| BREAK_TO_DEBUGGER(); | |
| return NULL; | |
| } | |
| memcpy(clk_dce->max_clks_by_state, | |
| dce80_max_clks_by_state, | |
| sizeof(dce80_max_clks_by_state)); | |
| dce_disp_clk_construct( | |
| clk_dce, ctx, regs, clk_shift, clk_mask); | |
| return &clk_dce->base; | |
| } | |
| struct display_clock *dce110_disp_clk_create( | |
| struct dc_context *ctx, | |
| const struct dce_disp_clk_registers *regs, | |
| const struct dce_disp_clk_shift *clk_shift, | |
| const struct dce_disp_clk_mask *clk_mask) | |
| { | |
| struct dce_disp_clk *clk_dce = kzalloc(sizeof(*clk_dce), GFP_KERNEL); | |
| if (clk_dce == NULL) { | |
| BREAK_TO_DEBUGGER(); | |
| return NULL; | |
| } | |
| memcpy(clk_dce->max_clks_by_state, | |
| dce110_max_clks_by_state, | |
| sizeof(dce110_max_clks_by_state)); | |
| dce_disp_clk_construct( | |
| clk_dce, ctx, regs, clk_shift, clk_mask); | |
| clk_dce->base.funcs = &dce110_funcs; | |
| return &clk_dce->base; | |
| } | |
| struct display_clock *dce112_disp_clk_create( | |
| struct dc_context *ctx, | |
| const struct dce_disp_clk_registers *regs, | |
| const struct dce_disp_clk_shift *clk_shift, | |
| const struct dce_disp_clk_mask *clk_mask) | |
| { | |
| struct dce_disp_clk *clk_dce = kzalloc(sizeof(*clk_dce), GFP_KERNEL); | |
| if (clk_dce == NULL) { | |
| BREAK_TO_DEBUGGER(); | |
| return NULL; | |
| } | |
| memcpy(clk_dce->max_clks_by_state, | |
| dce112_max_clks_by_state, | |
| sizeof(dce112_max_clks_by_state)); | |
| dce_disp_clk_construct( | |
| clk_dce, ctx, regs, clk_shift, clk_mask); | |
| clk_dce->base.funcs = &dce112_funcs; | |
| return &clk_dce->base; | |
| } | |
| struct display_clock *dce120_disp_clk_create(struct dc_context *ctx) | |
| { | |
| struct dce_disp_clk *clk_dce = kzalloc(sizeof(*clk_dce), GFP_KERNEL); | |
| struct dm_pp_clock_levels_with_voltage clk_level_info = {0}; | |
| if (clk_dce == NULL) { | |
| BREAK_TO_DEBUGGER(); | |
| return NULL; | |
| } | |
| memcpy(clk_dce->max_clks_by_state, | |
| dce120_max_clks_by_state, | |
| sizeof(dce120_max_clks_by_state)); | |
| dce_disp_clk_construct( | |
| clk_dce, ctx, NULL, NULL, NULL); | |
| clk_dce->base.funcs = &dce120_funcs; | |
| /* new in dce120 */ | |
| if (!ctx->dc->debug.disable_pplib_clock_request && | |
| dm_pp_get_clock_levels_by_type_with_voltage( | |
| ctx, DM_PP_CLOCK_TYPE_DISPLAY_CLK, &clk_level_info) | |
| && clk_level_info.num_levels) | |
| clk_dce->max_displ_clk_in_khz = | |
| clk_level_info.data[clk_level_info.num_levels - 1].clocks_in_khz; | |
| else | |
| clk_dce->max_displ_clk_in_khz = 1133000; | |
| return &clk_dce->base; | |
| } | |
| void dce_disp_clk_destroy(struct display_clock **disp_clk) | |
| { | |
| struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(*disp_clk); | |
| kfree(clk_dce); | |
| *disp_clk = NULL; | |
| } |