| /* | |
| * Copyright 2012-15 Advanced Micro Devices, Inc. | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be included in | |
| * all copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR | |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, | |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
| * OTHER DEALINGS IN THE SOFTWARE. | |
| * | |
| * Authors: AMD | |
| * | |
| */ | |
| #include "dm_services.h" | |
| #include "basics/conversion.h" | |
| #include "dce_opp.h" | |
| #include "reg_helper.h" | |
| #define REG(reg)\ | |
| (opp110->regs->reg) | |
| #undef FN | |
| #define FN(reg_name, field_name) \ | |
| opp110->opp_shift->field_name, opp110->opp_mask->field_name | |
| #define CTX \ | |
| opp110->base.ctx | |
| enum { | |
| MAX_PWL_ENTRY = 128, | |
| MAX_REGIONS_NUMBER = 16 | |
| }; | |
| enum { | |
| MAX_LUT_ENTRY = 256, | |
| MAX_NUMBER_OF_ENTRIES = 256 | |
| }; | |
| enum { | |
| OUTPUT_CSC_MATRIX_SIZE = 12 | |
| }; | |
| /* | |
| ***************************************************************************** | |
| * Function: regamma_config_regions_and_segments | |
| * | |
| * build regamma curve by using predefined hw points | |
| * uses interface parameters ,like EDID coeff. | |
| * | |
| * @param : parameters interface parameters | |
| * @return void | |
| * | |
| * @note | |
| * | |
| * @see | |
| * | |
| ***************************************************************************** | |
| */ | |
| /** | |
| * set_truncation | |
| * 1) set truncation depth: 0 for 18 bpp or 1 for 24 bpp | |
| * 2) enable truncation | |
| * 3) HW remove 12bit FMT support for DCE11 power saving reason. | |
| */ | |
| static void set_truncation( | |
| struct dce110_opp *opp110, | |
| const struct bit_depth_reduction_params *params) | |
| { | |
| /*Disable truncation*/ | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TRUNCATE_EN, 0, | |
| FMT_TRUNCATE_DEPTH, 0, | |
| FMT_TRUNCATE_MODE, 0); | |
| if (params->pixel_encoding == PIXEL_ENCODING_YCBCR422) { | |
| /* 8bpc trunc on YCbCr422*/ | |
| if (params->flags.TRUNCATE_DEPTH == 1) | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TRUNCATE_EN, 1, | |
| FMT_TRUNCATE_DEPTH, 1, | |
| FMT_TRUNCATE_MODE, 0); | |
| else if (params->flags.TRUNCATE_DEPTH == 2) | |
| /* 10bpc trunc on YCbCr422*/ | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TRUNCATE_EN, 1, | |
| FMT_TRUNCATE_DEPTH, 2, | |
| FMT_TRUNCATE_MODE, 0); | |
| return; | |
| } | |
| /* on other format-to do */ | |
| if (params->flags.TRUNCATE_ENABLED == 0 || | |
| params->flags.TRUNCATE_DEPTH == 2) | |
| return; | |
| /*Set truncation depth and Enable truncation*/ | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TRUNCATE_EN, 1, | |
| FMT_TRUNCATE_DEPTH, | |
| params->flags.TRUNCATE_MODE, | |
| FMT_TRUNCATE_MODE, | |
| params->flags.TRUNCATE_DEPTH); | |
| } | |
| /** | |
| * set_spatial_dither | |
| * 1) set spatial dithering mode: pattern of seed | |
| * 2) set spatical dithering depth: 0 for 18bpp or 1 for 24bpp | |
| * 3) set random seed | |
| * 4) set random mode | |
| * lfsr is reset every frame or not reset | |
| * RGB dithering method | |
| * 0: RGB data are all dithered with x^28+x^3+1 | |
| * 1: R data is dithered with x^28+x^3+1 | |
| * G data is dithered with x^28+X^9+1 | |
| * B data is dithered with x^28+x^13+1 | |
| * enable high pass filter or not | |
| * 5) enable spatical dithering | |
| */ | |
| static void set_spatial_dither( | |
| struct dce110_opp *opp110, | |
| const struct bit_depth_reduction_params *params) | |
| { | |
| /*Disable spatial (random) dithering*/ | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_SPATIAL_DITHER_EN, 0, | |
| FMT_SPATIAL_DITHER_DEPTH, 0, | |
| FMT_SPATIAL_DITHER_MODE, 0); | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_HIGHPASS_RANDOM_ENABLE, 0, | |
| FMT_FRAME_RANDOM_ENABLE, 0, | |
| FMT_RGB_RANDOM_ENABLE, 0); | |
| REG_UPDATE(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TEMPORAL_DITHER_EN, 0); | |
| /* no 10bpc on DCE11*/ | |
| if (params->flags.SPATIAL_DITHER_ENABLED == 0 || | |
| params->flags.SPATIAL_DITHER_DEPTH == 2) | |
| return; | |
| /* only use FRAME_COUNTER_MAX if frameRandom == 1*/ | |
| if (opp110->opp_mask->FMT_SPATIAL_DITHER_FRAME_COUNTER_MAX && | |
| opp110->opp_mask->FMT_SPATIAL_DITHER_FRAME_COUNTER_BIT_SWAP) { | |
| if (params->flags.FRAME_RANDOM == 1) { | |
| if (params->flags.SPATIAL_DITHER_DEPTH == 0 || | |
| params->flags.SPATIAL_DITHER_DEPTH == 1) { | |
| REG_UPDATE_2(FMT_CONTROL, | |
| FMT_SPATIAL_DITHER_FRAME_COUNTER_MAX, 15, | |
| FMT_SPATIAL_DITHER_FRAME_COUNTER_BIT_SWAP, 2); | |
| } else if (params->flags.SPATIAL_DITHER_DEPTH == 2) { | |
| REG_UPDATE_2(FMT_CONTROL, | |
| FMT_SPATIAL_DITHER_FRAME_COUNTER_MAX, 3, | |
| FMT_SPATIAL_DITHER_FRAME_COUNTER_BIT_SWAP, 1); | |
| } else | |
| return; | |
| } else { | |
| REG_UPDATE_2(FMT_CONTROL, | |
| FMT_SPATIAL_DITHER_FRAME_COUNTER_MAX, 0, | |
| FMT_SPATIAL_DITHER_FRAME_COUNTER_BIT_SWAP, 0); | |
| } | |
| } | |
| /* Set seed for random values for | |
| * spatial dithering for R,G,B channels | |
| */ | |
| REG_UPDATE(FMT_DITHER_RAND_R_SEED, | |
| FMT_RAND_R_SEED, params->r_seed_value); | |
| REG_UPDATE(FMT_DITHER_RAND_G_SEED, | |
| FMT_RAND_G_SEED, params->g_seed_value); | |
| REG_UPDATE(FMT_DITHER_RAND_B_SEED, | |
| FMT_RAND_B_SEED, params->b_seed_value); | |
| /* FMT_OFFSET_R_Cr 31:16 0x0 Setting the zero | |
| * offset for the R/Cr channel, lower 4LSB | |
| * is forced to zeros. Typically set to 0 | |
| * RGB and 0x80000 YCbCr. | |
| */ | |
| /* FMT_OFFSET_G_Y 31:16 0x0 Setting the zero | |
| * offset for the G/Y channel, lower 4LSB is | |
| * forced to zeros. Typically set to 0 RGB | |
| * and 0x80000 YCbCr. | |
| */ | |
| /* FMT_OFFSET_B_Cb 31:16 0x0 Setting the zero | |
| * offset for the B/Cb channel, lower 4LSB is | |
| * forced to zeros. Typically set to 0 RGB and | |
| * 0x80000 YCbCr. | |
| */ | |
| /* Disable High pass filter | |
| * Reset only at startup | |
| * Set RGB data dithered with x^28+x^3+1 | |
| */ | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_HIGHPASS_RANDOM_ENABLE, params->flags.HIGHPASS_RANDOM, | |
| FMT_FRAME_RANDOM_ENABLE, params->flags.FRAME_RANDOM, | |
| FMT_RGB_RANDOM_ENABLE, params->flags.RGB_RANDOM); | |
| /* Set spatial dithering bit depth | |
| * Set spatial dithering mode | |
| * (default is Seed patterrn AAAA...) | |
| * Enable spatial dithering | |
| */ | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_SPATIAL_DITHER_DEPTH, params->flags.SPATIAL_DITHER_DEPTH, | |
| FMT_SPATIAL_DITHER_MODE, params->flags.SPATIAL_DITHER_MODE, | |
| FMT_SPATIAL_DITHER_EN, 1); | |
| } | |
| /** | |
| * SetTemporalDither (Frame Modulation) | |
| * 1) set temporal dither depth | |
| * 2) select pattern: from hard-coded pattern or programmable pattern | |
| * 3) select optimized strips for BGR or RGB LCD sub-pixel | |
| * 4) set s matrix | |
| * 5) set t matrix | |
| * 6) set grey level for 0.25, 0.5, 0.75 | |
| * 7) enable temporal dithering | |
| */ | |
| static void set_temporal_dither( | |
| struct dce110_opp *opp110, | |
| const struct bit_depth_reduction_params *params) | |
| { | |
| /*Disable temporal (frame modulation) dithering first*/ | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TEMPORAL_DITHER_EN, 0, | |
| FMT_TEMPORAL_DITHER_RESET, 0, | |
| FMT_TEMPORAL_DITHER_OFFSET, 0); | |
| REG_UPDATE_2(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TEMPORAL_DITHER_DEPTH, 0, | |
| FMT_TEMPORAL_LEVEL, 0); | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_25FRC_SEL, 0, | |
| FMT_50FRC_SEL, 0, | |
| FMT_75FRC_SEL, 0); | |
| /* no 10bpc dither on DCE11*/ | |
| if (params->flags.FRAME_MODULATION_ENABLED == 0 || | |
| params->flags.FRAME_MODULATION_DEPTH == 2) | |
| return; | |
| /* Set temporal dithering depth*/ | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TEMPORAL_DITHER_DEPTH, params->flags.FRAME_MODULATION_DEPTH, | |
| FMT_TEMPORAL_DITHER_RESET, 0, | |
| FMT_TEMPORAL_DITHER_OFFSET, 0); | |
| /*Select legacy pattern based on FRC and Temporal level*/ | |
| if (REG(FMT_TEMPORAL_DITHER_PATTERN_CONTROL)) { | |
| REG_WRITE(FMT_TEMPORAL_DITHER_PATTERN_CONTROL, 0); | |
| /*Set s matrix*/ | |
| REG_WRITE(FMT_TEMPORAL_DITHER_PROGRAMMABLE_PATTERN_S_MATRIX, 0); | |
| /*Set t matrix*/ | |
| REG_WRITE(FMT_TEMPORAL_DITHER_PROGRAMMABLE_PATTERN_T_MATRIX, 0); | |
| } | |
| /*Select patterns for 0.25, 0.5 and 0.75 grey level*/ | |
| REG_UPDATE(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TEMPORAL_LEVEL, params->flags.TEMPORAL_LEVEL); | |
| REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL, | |
| FMT_25FRC_SEL, params->flags.FRC25, | |
| FMT_50FRC_SEL, params->flags.FRC50, | |
| FMT_75FRC_SEL, params->flags.FRC75); | |
| /*Enable bit reduction by temporal (frame modulation) dithering*/ | |
| REG_UPDATE(FMT_BIT_DEPTH_CONTROL, | |
| FMT_TEMPORAL_DITHER_EN, 1); | |
| } | |
| /** | |
| * Set Clamping | |
| * 1) Set clamping format based on bpc - 0 for 6bpc (No clamping) | |
| * 1 for 8 bpc | |
| * 2 for 10 bpc | |
| * 3 for 12 bpc | |
| * 7 for programable | |
| * 2) Enable clamp if Limited range requested | |
| */ | |
| void dce110_opp_set_clamping( | |
| struct dce110_opp *opp110, | |
| const struct clamping_and_pixel_encoding_params *params) | |
| { | |
| REG_SET_2(FMT_CLAMP_CNTL, 0, | |
| FMT_CLAMP_DATA_EN, 0, | |
| FMT_CLAMP_COLOR_FORMAT, 0); | |
| switch (params->clamping_level) { | |
| case CLAMPING_FULL_RANGE: | |
| break; | |
| case CLAMPING_LIMITED_RANGE_8BPC: | |
| REG_SET_2(FMT_CLAMP_CNTL, 0, | |
| FMT_CLAMP_DATA_EN, 1, | |
| FMT_CLAMP_COLOR_FORMAT, 1); | |
| break; | |
| case CLAMPING_LIMITED_RANGE_10BPC: | |
| REG_SET_2(FMT_CLAMP_CNTL, 0, | |
| FMT_CLAMP_DATA_EN, 1, | |
| FMT_CLAMP_COLOR_FORMAT, 2); | |
| break; | |
| case CLAMPING_LIMITED_RANGE_12BPC: | |
| REG_SET_2(FMT_CLAMP_CNTL, 0, | |
| FMT_CLAMP_DATA_EN, 1, | |
| FMT_CLAMP_COLOR_FORMAT, 3); | |
| break; | |
| case CLAMPING_LIMITED_RANGE_PROGRAMMABLE: | |
| /*Set clamp control*/ | |
| REG_SET_2(FMT_CLAMP_CNTL, 0, | |
| FMT_CLAMP_DATA_EN, 1, | |
| FMT_CLAMP_COLOR_FORMAT, 7); | |
| /*set the defaults*/ | |
| REG_SET_2(FMT_CLAMP_COMPONENT_R, 0, | |
| FMT_CLAMP_LOWER_R, 0x10, | |
| FMT_CLAMP_UPPER_R, 0xFEF); | |
| REG_SET_2(FMT_CLAMP_COMPONENT_G, 0, | |
| FMT_CLAMP_LOWER_G, 0x10, | |
| FMT_CLAMP_UPPER_G, 0xFEF); | |
| REG_SET_2(FMT_CLAMP_COMPONENT_B, 0, | |
| FMT_CLAMP_LOWER_B, 0x10, | |
| FMT_CLAMP_UPPER_B, 0xFEF); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /** | |
| * set_pixel_encoding | |
| * | |
| * Set Pixel Encoding | |
| * 0: RGB 4:4:4 or YCbCr 4:4:4 or YOnly | |
| * 1: YCbCr 4:2:2 | |
| */ | |
| static void set_pixel_encoding( | |
| struct dce110_opp *opp110, | |
| const struct clamping_and_pixel_encoding_params *params) | |
| { | |
| if (opp110->opp_mask->FMT_CBCR_BIT_REDUCTION_BYPASS) | |
| REG_UPDATE_3(FMT_CONTROL, | |
| FMT_PIXEL_ENCODING, 0, | |
| FMT_SUBSAMPLING_MODE, 0, | |
| FMT_CBCR_BIT_REDUCTION_BYPASS, 0); | |
| else | |
| REG_UPDATE_2(FMT_CONTROL, | |
| FMT_PIXEL_ENCODING, 0, | |
| FMT_SUBSAMPLING_MODE, 0); | |
| if (params->pixel_encoding == PIXEL_ENCODING_YCBCR422) { | |
| REG_UPDATE_2(FMT_CONTROL, | |
| FMT_PIXEL_ENCODING, 1, | |
| FMT_SUBSAMPLING_ORDER, 0); | |
| } | |
| if (params->pixel_encoding == PIXEL_ENCODING_YCBCR420) { | |
| REG_UPDATE_3(FMT_CONTROL, | |
| FMT_PIXEL_ENCODING, 2, | |
| FMT_SUBSAMPLING_MODE, 2, | |
| FMT_CBCR_BIT_REDUCTION_BYPASS, 1); | |
| } | |
| } | |
| void dce110_opp_program_bit_depth_reduction( | |
| struct output_pixel_processor *opp, | |
| const struct bit_depth_reduction_params *params) | |
| { | |
| struct dce110_opp *opp110 = TO_DCE110_OPP(opp); | |
| set_truncation(opp110, params); | |
| set_spatial_dither(opp110, params); | |
| set_temporal_dither(opp110, params); | |
| } | |
| void dce110_opp_program_clamping_and_pixel_encoding( | |
| struct output_pixel_processor *opp, | |
| const struct clamping_and_pixel_encoding_params *params) | |
| { | |
| struct dce110_opp *opp110 = TO_DCE110_OPP(opp); | |
| dce110_opp_set_clamping(opp110, params); | |
| set_pixel_encoding(opp110, params); | |
| } | |
| static void program_formatter_420_memory(struct output_pixel_processor *opp) | |
| { | |
| struct dce110_opp *opp110 = TO_DCE110_OPP(opp); | |
| uint32_t fmt_mem_cntl_value; | |
| /* Program source select*/ | |
| /* Use HW default source select for FMT_MEMORYx_CONTROL */ | |
| /* Use that value for FMT_SRC_SELECT as well*/ | |
| REG_GET(CONTROL, | |
| FMT420_MEM0_SOURCE_SEL, &fmt_mem_cntl_value); | |
| REG_UPDATE(FMT_CONTROL, | |
| FMT_SRC_SELECT, fmt_mem_cntl_value); | |
| /* Turn on the memory */ | |
| REG_UPDATE(CONTROL, | |
| FMT420_MEM0_PWR_FORCE, 0); | |
| } | |
| void dce110_opp_set_dyn_expansion( | |
| struct output_pixel_processor *opp, | |
| enum dc_color_space color_sp, | |
| enum dc_color_depth color_dpth, | |
| enum signal_type signal) | |
| { | |
| struct dce110_opp *opp110 = TO_DCE110_OPP(opp); | |
| REG_UPDATE_2(FMT_DYNAMIC_EXP_CNTL, | |
| FMT_DYNAMIC_EXP_EN, 0, | |
| FMT_DYNAMIC_EXP_MODE, 0); | |
| /*00 - 10-bit -> 12-bit dynamic expansion*/ | |
| /*01 - 8-bit -> 12-bit dynamic expansion*/ | |
| if (signal == SIGNAL_TYPE_HDMI_TYPE_A || | |
| signal == SIGNAL_TYPE_DISPLAY_PORT || | |
| signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { | |
| switch (color_dpth) { | |
| case COLOR_DEPTH_888: | |
| REG_UPDATE_2(FMT_DYNAMIC_EXP_CNTL, | |
| FMT_DYNAMIC_EXP_EN, 1, | |
| FMT_DYNAMIC_EXP_MODE, 1); | |
| break; | |
| case COLOR_DEPTH_101010: | |
| REG_UPDATE_2(FMT_DYNAMIC_EXP_CNTL, | |
| FMT_DYNAMIC_EXP_EN, 1, | |
| FMT_DYNAMIC_EXP_MODE, 0); | |
| break; | |
| case COLOR_DEPTH_121212: | |
| REG_UPDATE_2( | |
| FMT_DYNAMIC_EXP_CNTL, | |
| FMT_DYNAMIC_EXP_EN, 1,/*otherwise last two bits are zero*/ | |
| FMT_DYNAMIC_EXP_MODE, 0); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| } | |
| static void program_formatter_reset_dig_resync_fifo(struct output_pixel_processor *opp) | |
| { | |
| struct dce110_opp *opp110 = TO_DCE110_OPP(opp); | |
| /* clear previous phase lock status*/ | |
| REG_UPDATE(FMT_CONTROL, | |
| FMT_420_PIXEL_PHASE_LOCKED_CLEAR, 1); | |
| /* poll until FMT_420_PIXEL_PHASE_LOCKED become 1*/ | |
| REG_WAIT(FMT_CONTROL, FMT_420_PIXEL_PHASE_LOCKED, 1, 10, 10); | |
| } | |
| void dce110_opp_program_fmt( | |
| struct output_pixel_processor *opp, | |
| struct bit_depth_reduction_params *fmt_bit_depth, | |
| struct clamping_and_pixel_encoding_params *clamping) | |
| { | |
| /* dithering is affected by <CrtcSourceSelect>, hence should be | |
| * programmed afterwards */ | |
| if (clamping->pixel_encoding == PIXEL_ENCODING_YCBCR420) | |
| program_formatter_420_memory(opp); | |
| dce110_opp_program_bit_depth_reduction( | |
| opp, | |
| fmt_bit_depth); | |
| dce110_opp_program_clamping_and_pixel_encoding( | |
| opp, | |
| clamping); | |
| if (clamping->pixel_encoding == PIXEL_ENCODING_YCBCR420) | |
| program_formatter_reset_dig_resync_fifo(opp); | |
| return; | |
| } | |
| /*****************************************/ | |
| /* Constructor, Destructor */ | |
| /*****************************************/ | |
| static const struct opp_funcs funcs = { | |
| .opp_set_dyn_expansion = dce110_opp_set_dyn_expansion, | |
| .opp_destroy = dce110_opp_destroy, | |
| .opp_program_fmt = dce110_opp_program_fmt, | |
| .opp_program_bit_depth_reduction = dce110_opp_program_bit_depth_reduction | |
| }; | |
| void dce110_opp_construct(struct dce110_opp *opp110, | |
| struct dc_context *ctx, | |
| uint32_t inst, | |
| const struct dce_opp_registers *regs, | |
| const struct dce_opp_shift *opp_shift, | |
| const struct dce_opp_mask *opp_mask) | |
| { | |
| opp110->base.funcs = &funcs; | |
| opp110->base.ctx = ctx; | |
| opp110->base.inst = inst; | |
| opp110->regs = regs; | |
| opp110->opp_shift = opp_shift; | |
| opp110->opp_mask = opp_mask; | |
| } | |
| void dce110_opp_destroy(struct output_pixel_processor **opp) | |
| { | |
| if (*opp) | |
| kfree(FROM_DCE11_OPP(*opp)); | |
| *opp = NULL; | |
| } | |