| /* | |
| * Copyright (C) 2012 Samsung Electronics Co.Ltd | |
| * Authors: | |
| * YoungJun Cho <yj44.cho@samsung.com> | |
| * Eunchul Kim <chulspro.kim@samsung.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundationr | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/err.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/clk.h> | |
| #include <linux/of_device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <drm/drmP.h> | |
| #include <drm/exynos_drm.h> | |
| #include "regs-rotator.h" | |
| #include "exynos_drm_drv.h" | |
| #include "exynos_drm_ipp.h" | |
| /* | |
| * Rotator supports image crop/rotator and input/output DMA operations. | |
| * input DMA reads image data from the memory. | |
| * output DMA writes image data to memory. | |
| * | |
| * M2M operation : supports crop/scale/rotation/csc so on. | |
| * Memory ----> Rotator H/W ----> Memory. | |
| */ | |
| /* | |
| * TODO | |
| * 1. check suspend/resume api if needed. | |
| * 2. need to check use case platform_device_id. | |
| * 3. check src/dst size with, height. | |
| * 4. need to add supported list in prop_list. | |
| */ | |
| #define get_rot_context(dev) platform_get_drvdata(to_platform_device(dev)) | |
| #define get_ctx_from_ippdrv(ippdrv) container_of(ippdrv,\ | |
| struct rot_context, ippdrv); | |
| #define rot_read(offset) readl(rot->regs + (offset)) | |
| #define rot_write(cfg, offset) writel(cfg, rot->regs + (offset)) | |
| enum rot_irq_status { | |
| ROT_IRQ_STATUS_COMPLETE = 8, | |
| ROT_IRQ_STATUS_ILLEGAL = 9, | |
| }; | |
| /* | |
| * A structure of limitation. | |
| * | |
| * @min_w: minimum width. | |
| * @min_h: minimum height. | |
| * @max_w: maximum width. | |
| * @max_h: maximum height. | |
| * @align: align size. | |
| */ | |
| struct rot_limit { | |
| u32 min_w; | |
| u32 min_h; | |
| u32 max_w; | |
| u32 max_h; | |
| u32 align; | |
| }; | |
| /* | |
| * A structure of limitation table. | |
| * | |
| * @ycbcr420_2p: case of YUV. | |
| * @rgb888: case of RGB. | |
| */ | |
| struct rot_limit_table { | |
| struct rot_limit ycbcr420_2p; | |
| struct rot_limit rgb888; | |
| }; | |
| /* | |
| * A structure of rotator context. | |
| * @ippdrv: prepare initialization using ippdrv. | |
| * @regs_res: register resources. | |
| * @regs: memory mapped io registers. | |
| * @clock: rotator gate clock. | |
| * @limit_tbl: limitation of rotator. | |
| * @irq: irq number. | |
| * @cur_buf_id: current operation buffer id. | |
| * @suspended: suspended state. | |
| */ | |
| struct rot_context { | |
| struct exynos_drm_ippdrv ippdrv; | |
| struct resource *regs_res; | |
| void __iomem *regs; | |
| struct clk *clock; | |
| struct rot_limit_table *limit_tbl; | |
| int irq; | |
| int cur_buf_id[EXYNOS_DRM_OPS_MAX]; | |
| bool suspended; | |
| }; | |
| static void rotator_reg_set_irq(struct rot_context *rot, bool enable) | |
| { | |
| u32 val = rot_read(ROT_CONFIG); | |
| if (enable == true) | |
| val |= ROT_CONFIG_IRQ; | |
| else | |
| val &= ~ROT_CONFIG_IRQ; | |
| rot_write(val, ROT_CONFIG); | |
| } | |
| static u32 rotator_reg_get_fmt(struct rot_context *rot) | |
| { | |
| u32 val = rot_read(ROT_CONTROL); | |
| val &= ROT_CONTROL_FMT_MASK; | |
| return val; | |
| } | |
| static enum rot_irq_status rotator_reg_get_irq_status(struct rot_context *rot) | |
| { | |
| u32 val = rot_read(ROT_STATUS); | |
| val = ROT_STATUS_IRQ(val); | |
| if (val == ROT_STATUS_IRQ_VAL_COMPLETE) | |
| return ROT_IRQ_STATUS_COMPLETE; | |
| return ROT_IRQ_STATUS_ILLEGAL; | |
| } | |
| static irqreturn_t rotator_irq_handler(int irq, void *arg) | |
| { | |
| struct rot_context *rot = arg; | |
| struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv; | |
| struct drm_exynos_ipp_cmd_node *c_node = ippdrv->c_node; | |
| struct drm_exynos_ipp_event_work *event_work = c_node->event_work; | |
| enum rot_irq_status irq_status; | |
| u32 val; | |
| /* Get execution result */ | |
| irq_status = rotator_reg_get_irq_status(rot); | |
| /* clear status */ | |
| val = rot_read(ROT_STATUS); | |
| val |= ROT_STATUS_IRQ_PENDING((u32)irq_status); | |
| rot_write(val, ROT_STATUS); | |
| if (irq_status == ROT_IRQ_STATUS_COMPLETE) { | |
| event_work->ippdrv = ippdrv; | |
| event_work->buf_id[EXYNOS_DRM_OPS_DST] = | |
| rot->cur_buf_id[EXYNOS_DRM_OPS_DST]; | |
| queue_work(ippdrv->event_workq, &event_work->work); | |
| } else { | |
| DRM_ERROR("the SFR is set illegally\n"); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static void rotator_align_size(struct rot_context *rot, u32 fmt, u32 *hsize, | |
| u32 *vsize) | |
| { | |
| struct rot_limit_table *limit_tbl = rot->limit_tbl; | |
| struct rot_limit *limit; | |
| u32 mask, val; | |
| /* Get size limit */ | |
| if (fmt == ROT_CONTROL_FMT_RGB888) | |
| limit = &limit_tbl->rgb888; | |
| else | |
| limit = &limit_tbl->ycbcr420_2p; | |
| /* Get mask for rounding to nearest aligned val */ | |
| mask = ~((1 << limit->align) - 1); | |
| /* Set aligned width */ | |
| val = ROT_ALIGN(*hsize, limit->align, mask); | |
| if (val < limit->min_w) | |
| *hsize = ROT_MIN(limit->min_w, mask); | |
| else if (val > limit->max_w) | |
| *hsize = ROT_MAX(limit->max_w, mask); | |
| else | |
| *hsize = val; | |
| /* Set aligned height */ | |
| val = ROT_ALIGN(*vsize, limit->align, mask); | |
| if (val < limit->min_h) | |
| *vsize = ROT_MIN(limit->min_h, mask); | |
| else if (val > limit->max_h) | |
| *vsize = ROT_MAX(limit->max_h, mask); | |
| else | |
| *vsize = val; | |
| } | |
| static int rotator_src_set_fmt(struct device *dev, u32 fmt) | |
| { | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| u32 val; | |
| val = rot_read(ROT_CONTROL); | |
| val &= ~ROT_CONTROL_FMT_MASK; | |
| switch (fmt) { | |
| case DRM_FORMAT_NV12: | |
| val |= ROT_CONTROL_FMT_YCBCR420_2P; | |
| break; | |
| case DRM_FORMAT_XRGB8888: | |
| val |= ROT_CONTROL_FMT_RGB888; | |
| break; | |
| default: | |
| DRM_ERROR("invalid image format\n"); | |
| return -EINVAL; | |
| } | |
| rot_write(val, ROT_CONTROL); | |
| return 0; | |
| } | |
| static inline bool rotator_check_reg_fmt(u32 fmt) | |
| { | |
| if ((fmt == ROT_CONTROL_FMT_YCBCR420_2P) || | |
| (fmt == ROT_CONTROL_FMT_RGB888)) | |
| return true; | |
| return false; | |
| } | |
| static int rotator_src_set_size(struct device *dev, int swap, | |
| struct drm_exynos_pos *pos, | |
| struct drm_exynos_sz *sz) | |
| { | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| u32 fmt, hsize, vsize; | |
| u32 val; | |
| /* Get format */ | |
| fmt = rotator_reg_get_fmt(rot); | |
| if (!rotator_check_reg_fmt(fmt)) { | |
| DRM_ERROR("invalid format.\n"); | |
| return -EINVAL; | |
| } | |
| /* Align buffer size */ | |
| hsize = sz->hsize; | |
| vsize = sz->vsize; | |
| rotator_align_size(rot, fmt, &hsize, &vsize); | |
| /* Set buffer size configuration */ | |
| val = ROT_SET_BUF_SIZE_H(vsize) | ROT_SET_BUF_SIZE_W(hsize); | |
| rot_write(val, ROT_SRC_BUF_SIZE); | |
| /* Set crop image position configuration */ | |
| val = ROT_CROP_POS_Y(pos->y) | ROT_CROP_POS_X(pos->x); | |
| rot_write(val, ROT_SRC_CROP_POS); | |
| val = ROT_SRC_CROP_SIZE_H(pos->h) | ROT_SRC_CROP_SIZE_W(pos->w); | |
| rot_write(val, ROT_SRC_CROP_SIZE); | |
| return 0; | |
| } | |
| static int rotator_src_set_addr(struct device *dev, | |
| struct drm_exynos_ipp_buf_info *buf_info, | |
| u32 buf_id, enum drm_exynos_ipp_buf_type buf_type) | |
| { | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| dma_addr_t addr[EXYNOS_DRM_PLANAR_MAX]; | |
| u32 val, fmt, hsize, vsize; | |
| int i; | |
| /* Set current buf_id */ | |
| rot->cur_buf_id[EXYNOS_DRM_OPS_SRC] = buf_id; | |
| switch (buf_type) { | |
| case IPP_BUF_ENQUEUE: | |
| /* Set address configuration */ | |
| for_each_ipp_planar(i) | |
| addr[i] = buf_info->base[i]; | |
| /* Get format */ | |
| fmt = rotator_reg_get_fmt(rot); | |
| if (!rotator_check_reg_fmt(fmt)) { | |
| DRM_ERROR("invalid format.\n"); | |
| return -EINVAL; | |
| } | |
| /* Re-set cb planar for NV12 format */ | |
| if ((fmt == ROT_CONTROL_FMT_YCBCR420_2P) && | |
| !addr[EXYNOS_DRM_PLANAR_CB]) { | |
| val = rot_read(ROT_SRC_BUF_SIZE); | |
| hsize = ROT_GET_BUF_SIZE_W(val); | |
| vsize = ROT_GET_BUF_SIZE_H(val); | |
| /* Set cb planar */ | |
| addr[EXYNOS_DRM_PLANAR_CB] = | |
| addr[EXYNOS_DRM_PLANAR_Y] + hsize * vsize; | |
| } | |
| for_each_ipp_planar(i) | |
| rot_write(addr[i], ROT_SRC_BUF_ADDR(i)); | |
| break; | |
| case IPP_BUF_DEQUEUE: | |
| for_each_ipp_planar(i) | |
| rot_write(0x0, ROT_SRC_BUF_ADDR(i)); | |
| break; | |
| default: | |
| /* Nothing to do */ | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int rotator_dst_set_transf(struct device *dev, | |
| enum drm_exynos_degree degree, | |
| enum drm_exynos_flip flip, bool *swap) | |
| { | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| u32 val; | |
| /* Set transform configuration */ | |
| val = rot_read(ROT_CONTROL); | |
| val &= ~ROT_CONTROL_FLIP_MASK; | |
| switch (flip) { | |
| case EXYNOS_DRM_FLIP_VERTICAL: | |
| val |= ROT_CONTROL_FLIP_VERTICAL; | |
| break; | |
| case EXYNOS_DRM_FLIP_HORIZONTAL: | |
| val |= ROT_CONTROL_FLIP_HORIZONTAL; | |
| break; | |
| default: | |
| /* Flip None */ | |
| break; | |
| } | |
| val &= ~ROT_CONTROL_ROT_MASK; | |
| switch (degree) { | |
| case EXYNOS_DRM_DEGREE_90: | |
| val |= ROT_CONTROL_ROT_90; | |
| break; | |
| case EXYNOS_DRM_DEGREE_180: | |
| val |= ROT_CONTROL_ROT_180; | |
| break; | |
| case EXYNOS_DRM_DEGREE_270: | |
| val |= ROT_CONTROL_ROT_270; | |
| break; | |
| default: | |
| /* Rotation 0 Degree */ | |
| break; | |
| } | |
| rot_write(val, ROT_CONTROL); | |
| /* Check degree for setting buffer size swap */ | |
| if ((degree == EXYNOS_DRM_DEGREE_90) || | |
| (degree == EXYNOS_DRM_DEGREE_270)) | |
| *swap = true; | |
| else | |
| *swap = false; | |
| return 0; | |
| } | |
| static int rotator_dst_set_size(struct device *dev, int swap, | |
| struct drm_exynos_pos *pos, | |
| struct drm_exynos_sz *sz) | |
| { | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| u32 val, fmt, hsize, vsize; | |
| /* Get format */ | |
| fmt = rotator_reg_get_fmt(rot); | |
| if (!rotator_check_reg_fmt(fmt)) { | |
| DRM_ERROR("invalid format.\n"); | |
| return -EINVAL; | |
| } | |
| /* Align buffer size */ | |
| hsize = sz->hsize; | |
| vsize = sz->vsize; | |
| rotator_align_size(rot, fmt, &hsize, &vsize); | |
| /* Set buffer size configuration */ | |
| val = ROT_SET_BUF_SIZE_H(vsize) | ROT_SET_BUF_SIZE_W(hsize); | |
| rot_write(val, ROT_DST_BUF_SIZE); | |
| /* Set crop image position configuration */ | |
| val = ROT_CROP_POS_Y(pos->y) | ROT_CROP_POS_X(pos->x); | |
| rot_write(val, ROT_DST_CROP_POS); | |
| return 0; | |
| } | |
| static int rotator_dst_set_addr(struct device *dev, | |
| struct drm_exynos_ipp_buf_info *buf_info, | |
| u32 buf_id, enum drm_exynos_ipp_buf_type buf_type) | |
| { | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| dma_addr_t addr[EXYNOS_DRM_PLANAR_MAX]; | |
| u32 val, fmt, hsize, vsize; | |
| int i; | |
| /* Set current buf_id */ | |
| rot->cur_buf_id[EXYNOS_DRM_OPS_DST] = buf_id; | |
| switch (buf_type) { | |
| case IPP_BUF_ENQUEUE: | |
| /* Set address configuration */ | |
| for_each_ipp_planar(i) | |
| addr[i] = buf_info->base[i]; | |
| /* Get format */ | |
| fmt = rotator_reg_get_fmt(rot); | |
| if (!rotator_check_reg_fmt(fmt)) { | |
| DRM_ERROR("invalid format.\n"); | |
| return -EINVAL; | |
| } | |
| /* Re-set cb planar for NV12 format */ | |
| if ((fmt == ROT_CONTROL_FMT_YCBCR420_2P) && | |
| !addr[EXYNOS_DRM_PLANAR_CB]) { | |
| /* Get buf size */ | |
| val = rot_read(ROT_DST_BUF_SIZE); | |
| hsize = ROT_GET_BUF_SIZE_W(val); | |
| vsize = ROT_GET_BUF_SIZE_H(val); | |
| /* Set cb planar */ | |
| addr[EXYNOS_DRM_PLANAR_CB] = | |
| addr[EXYNOS_DRM_PLANAR_Y] + hsize * vsize; | |
| } | |
| for_each_ipp_planar(i) | |
| rot_write(addr[i], ROT_DST_BUF_ADDR(i)); | |
| break; | |
| case IPP_BUF_DEQUEUE: | |
| for_each_ipp_planar(i) | |
| rot_write(0x0, ROT_DST_BUF_ADDR(i)); | |
| break; | |
| default: | |
| /* Nothing to do */ | |
| break; | |
| } | |
| return 0; | |
| } | |
| static struct exynos_drm_ipp_ops rot_src_ops = { | |
| .set_fmt = rotator_src_set_fmt, | |
| .set_size = rotator_src_set_size, | |
| .set_addr = rotator_src_set_addr, | |
| }; | |
| static struct exynos_drm_ipp_ops rot_dst_ops = { | |
| .set_transf = rotator_dst_set_transf, | |
| .set_size = rotator_dst_set_size, | |
| .set_addr = rotator_dst_set_addr, | |
| }; | |
| static int rotator_init_prop_list(struct exynos_drm_ippdrv *ippdrv) | |
| { | |
| struct drm_exynos_ipp_prop_list *prop_list = &ippdrv->prop_list; | |
| prop_list->version = 1; | |
| prop_list->flip = (1 << EXYNOS_DRM_FLIP_VERTICAL) | | |
| (1 << EXYNOS_DRM_FLIP_HORIZONTAL); | |
| prop_list->degree = (1 << EXYNOS_DRM_DEGREE_0) | | |
| (1 << EXYNOS_DRM_DEGREE_90) | | |
| (1 << EXYNOS_DRM_DEGREE_180) | | |
| (1 << EXYNOS_DRM_DEGREE_270); | |
| prop_list->csc = 0; | |
| prop_list->crop = 0; | |
| prop_list->scale = 0; | |
| return 0; | |
| } | |
| static inline bool rotator_check_drm_fmt(u32 fmt) | |
| { | |
| switch (fmt) { | |
| case DRM_FORMAT_XRGB8888: | |
| case DRM_FORMAT_NV12: | |
| return true; | |
| default: | |
| DRM_DEBUG_KMS("not support format\n"); | |
| return false; | |
| } | |
| } | |
| static inline bool rotator_check_drm_flip(enum drm_exynos_flip flip) | |
| { | |
| switch (flip) { | |
| case EXYNOS_DRM_FLIP_NONE: | |
| case EXYNOS_DRM_FLIP_VERTICAL: | |
| case EXYNOS_DRM_FLIP_HORIZONTAL: | |
| case EXYNOS_DRM_FLIP_BOTH: | |
| return true; | |
| default: | |
| DRM_DEBUG_KMS("invalid flip\n"); | |
| return false; | |
| } | |
| } | |
| static int rotator_ippdrv_check_property(struct device *dev, | |
| struct drm_exynos_ipp_property *property) | |
| { | |
| struct drm_exynos_ipp_config *src_config = | |
| &property->config[EXYNOS_DRM_OPS_SRC]; | |
| struct drm_exynos_ipp_config *dst_config = | |
| &property->config[EXYNOS_DRM_OPS_DST]; | |
| struct drm_exynos_pos *src_pos = &src_config->pos; | |
| struct drm_exynos_pos *dst_pos = &dst_config->pos; | |
| struct drm_exynos_sz *src_sz = &src_config->sz; | |
| struct drm_exynos_sz *dst_sz = &dst_config->sz; | |
| bool swap = false; | |
| /* Check format configuration */ | |
| if (src_config->fmt != dst_config->fmt) { | |
| DRM_DEBUG_KMS("not support csc feature\n"); | |
| return -EINVAL; | |
| } | |
| if (!rotator_check_drm_fmt(dst_config->fmt)) { | |
| DRM_DEBUG_KMS("invalid format\n"); | |
| return -EINVAL; | |
| } | |
| /* Check transform configuration */ | |
| if (src_config->degree != EXYNOS_DRM_DEGREE_0) { | |
| DRM_DEBUG_KMS("not support source-side rotation\n"); | |
| return -EINVAL; | |
| } | |
| switch (dst_config->degree) { | |
| case EXYNOS_DRM_DEGREE_90: | |
| case EXYNOS_DRM_DEGREE_270: | |
| swap = true; | |
| case EXYNOS_DRM_DEGREE_0: | |
| case EXYNOS_DRM_DEGREE_180: | |
| /* No problem */ | |
| break; | |
| default: | |
| DRM_DEBUG_KMS("invalid degree\n"); | |
| return -EINVAL; | |
| } | |
| if (src_config->flip != EXYNOS_DRM_FLIP_NONE) { | |
| DRM_DEBUG_KMS("not support source-side flip\n"); | |
| return -EINVAL; | |
| } | |
| if (!rotator_check_drm_flip(dst_config->flip)) { | |
| DRM_DEBUG_KMS("invalid flip\n"); | |
| return -EINVAL; | |
| } | |
| /* Check size configuration */ | |
| if ((src_pos->x + src_pos->w > src_sz->hsize) || | |
| (src_pos->y + src_pos->h > src_sz->vsize)) { | |
| DRM_DEBUG_KMS("out of source buffer bound\n"); | |
| return -EINVAL; | |
| } | |
| if (swap) { | |
| if ((dst_pos->x + dst_pos->h > dst_sz->vsize) || | |
| (dst_pos->y + dst_pos->w > dst_sz->hsize)) { | |
| DRM_DEBUG_KMS("out of destination buffer bound\n"); | |
| return -EINVAL; | |
| } | |
| if ((src_pos->w != dst_pos->h) || (src_pos->h != dst_pos->w)) { | |
| DRM_DEBUG_KMS("not support scale feature\n"); | |
| return -EINVAL; | |
| } | |
| } else { | |
| if ((dst_pos->x + dst_pos->w > dst_sz->hsize) || | |
| (dst_pos->y + dst_pos->h > dst_sz->vsize)) { | |
| DRM_DEBUG_KMS("out of destination buffer bound\n"); | |
| return -EINVAL; | |
| } | |
| if ((src_pos->w != dst_pos->w) || (src_pos->h != dst_pos->h)) { | |
| DRM_DEBUG_KMS("not support scale feature\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int rotator_ippdrv_start(struct device *dev, enum drm_exynos_ipp_cmd cmd) | |
| { | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| u32 val; | |
| if (rot->suspended) { | |
| DRM_ERROR("suspended state\n"); | |
| return -EPERM; | |
| } | |
| if (cmd != IPP_CMD_M2M) { | |
| DRM_ERROR("not support cmd: %d\n", cmd); | |
| return -EINVAL; | |
| } | |
| /* Set interrupt enable */ | |
| rotator_reg_set_irq(rot, true); | |
| val = rot_read(ROT_CONTROL); | |
| val |= ROT_CONTROL_START; | |
| rot_write(val, ROT_CONTROL); | |
| return 0; | |
| } | |
| static struct rot_limit_table rot_limit_tbl_4210 = { | |
| .ycbcr420_2p = { | |
| .min_w = 32, | |
| .min_h = 32, | |
| .max_w = SZ_64K, | |
| .max_h = SZ_64K, | |
| .align = 3, | |
| }, | |
| .rgb888 = { | |
| .min_w = 8, | |
| .min_h = 8, | |
| .max_w = SZ_16K, | |
| .max_h = SZ_16K, | |
| .align = 2, | |
| }, | |
| }; | |
| static struct rot_limit_table rot_limit_tbl_4x12 = { | |
| .ycbcr420_2p = { | |
| .min_w = 32, | |
| .min_h = 32, | |
| .max_w = SZ_32K, | |
| .max_h = SZ_32K, | |
| .align = 3, | |
| }, | |
| .rgb888 = { | |
| .min_w = 8, | |
| .min_h = 8, | |
| .max_w = SZ_8K, | |
| .max_h = SZ_8K, | |
| .align = 2, | |
| }, | |
| }; | |
| static struct rot_limit_table rot_limit_tbl_5250 = { | |
| .ycbcr420_2p = { | |
| .min_w = 32, | |
| .min_h = 32, | |
| .max_w = SZ_32K, | |
| .max_h = SZ_32K, | |
| .align = 3, | |
| }, | |
| .rgb888 = { | |
| .min_w = 8, | |
| .min_h = 8, | |
| .max_w = SZ_8K, | |
| .max_h = SZ_8K, | |
| .align = 1, | |
| }, | |
| }; | |
| static const struct of_device_id exynos_rotator_match[] = { | |
| { | |
| .compatible = "samsung,exynos4210-rotator", | |
| .data = &rot_limit_tbl_4210, | |
| }, | |
| { | |
| .compatible = "samsung,exynos4212-rotator", | |
| .data = &rot_limit_tbl_4x12, | |
| }, | |
| { | |
| .compatible = "samsung,exynos5250-rotator", | |
| .data = &rot_limit_tbl_5250, | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, exynos_rotator_match); | |
| static int rotator_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct rot_context *rot; | |
| struct exynos_drm_ippdrv *ippdrv; | |
| int ret; | |
| if (!dev->of_node) { | |
| dev_err(dev, "cannot find of_node.\n"); | |
| return -ENODEV; | |
| } | |
| rot = devm_kzalloc(dev, sizeof(*rot), GFP_KERNEL); | |
| if (!rot) | |
| return -ENOMEM; | |
| rot->limit_tbl = (struct rot_limit_table *) | |
| of_device_get_match_data(dev); | |
| rot->regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| rot->regs = devm_ioremap_resource(dev, rot->regs_res); | |
| if (IS_ERR(rot->regs)) | |
| return PTR_ERR(rot->regs); | |
| rot->irq = platform_get_irq(pdev, 0); | |
| if (rot->irq < 0) { | |
| dev_err(dev, "failed to get irq\n"); | |
| return rot->irq; | |
| } | |
| ret = devm_request_threaded_irq(dev, rot->irq, NULL, | |
| rotator_irq_handler, IRQF_ONESHOT, "drm_rotator", rot); | |
| if (ret < 0) { | |
| dev_err(dev, "failed to request irq\n"); | |
| return ret; | |
| } | |
| rot->clock = devm_clk_get(dev, "rotator"); | |
| if (IS_ERR(rot->clock)) { | |
| dev_err(dev, "failed to get clock\n"); | |
| return PTR_ERR(rot->clock); | |
| } | |
| pm_runtime_enable(dev); | |
| ippdrv = &rot->ippdrv; | |
| ippdrv->dev = dev; | |
| ippdrv->ops[EXYNOS_DRM_OPS_SRC] = &rot_src_ops; | |
| ippdrv->ops[EXYNOS_DRM_OPS_DST] = &rot_dst_ops; | |
| ippdrv->check_property = rotator_ippdrv_check_property; | |
| ippdrv->start = rotator_ippdrv_start; | |
| ret = rotator_init_prop_list(ippdrv); | |
| if (ret < 0) { | |
| dev_err(dev, "failed to init property list.\n"); | |
| goto err_ippdrv_register; | |
| } | |
| DRM_DEBUG_KMS("ippdrv[%pK]\n", ippdrv); | |
| platform_set_drvdata(pdev, rot); | |
| ret = exynos_drm_ippdrv_register(ippdrv); | |
| if (ret < 0) { | |
| dev_err(dev, "failed to register drm rotator device\n"); | |
| goto err_ippdrv_register; | |
| } | |
| dev_info(dev, "The exynos rotator is probed successfully\n"); | |
| return 0; | |
| err_ippdrv_register: | |
| pm_runtime_disable(dev); | |
| return ret; | |
| } | |
| static int rotator_remove(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv; | |
| exynos_drm_ippdrv_unregister(ippdrv); | |
| pm_runtime_disable(dev); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int rotator_clk_crtl(struct rot_context *rot, bool enable) | |
| { | |
| if (enable) { | |
| clk_prepare_enable(rot->clock); | |
| rot->suspended = false; | |
| } else { | |
| clk_disable_unprepare(rot->clock); | |
| rot->suspended = true; | |
| } | |
| return 0; | |
| } | |
| static int rotator_runtime_suspend(struct device *dev) | |
| { | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| return rotator_clk_crtl(rot, false); | |
| } | |
| static int rotator_runtime_resume(struct device *dev) | |
| { | |
| struct rot_context *rot = dev_get_drvdata(dev); | |
| return rotator_clk_crtl(rot, true); | |
| } | |
| #endif | |
| static const struct dev_pm_ops rotator_pm_ops = { | |
| SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, | |
| pm_runtime_force_resume) | |
| SET_RUNTIME_PM_OPS(rotator_runtime_suspend, rotator_runtime_resume, | |
| NULL) | |
| }; | |
| struct platform_driver rotator_driver = { | |
| .probe = rotator_probe, | |
| .remove = rotator_remove, | |
| .driver = { | |
| .name = "exynos-rot", | |
| .owner = THIS_MODULE, | |
| .pm = &rotator_pm_ops, | |
| .of_match_table = exynos_rotator_match, | |
| }, | |
| }; |