| /* | |
| * HDMI CEC | |
| * | |
| * Based on the CEC code from hdmi_ti_4xxx_ip.c from Android. | |
| * | |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/ | |
| * Authors: Yong Zhi | |
| * Mythri pk <mythripk@ti.com> | |
| * | |
| * Heavily modified to use the linux CEC framework: | |
| * | |
| * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved. | |
| * | |
| * This program is free software; you may redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; version 2 of the License. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | |
| * SOFTWARE. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include "dss.h" | |
| #include "hdmi.h" | |
| #include "hdmi4_core.h" | |
| #include "hdmi4_cec.h" | |
| /* HDMI CEC */ | |
| #define HDMI_CEC_DEV_ID 0x900 | |
| #define HDMI_CEC_SPEC 0x904 | |
| /* Not really a debug register, more a low-level control register */ | |
| #define HDMI_CEC_DBG_3 0x91C | |
| #define HDMI_CEC_TX_INIT 0x920 | |
| #define HDMI_CEC_TX_DEST 0x924 | |
| #define HDMI_CEC_SETUP 0x938 | |
| #define HDMI_CEC_TX_COMMAND 0x93C | |
| #define HDMI_CEC_TX_OPERAND 0x940 | |
| #define HDMI_CEC_TRANSMIT_DATA 0x97C | |
| #define HDMI_CEC_CA_7_0 0x988 | |
| #define HDMI_CEC_CA_15_8 0x98C | |
| #define HDMI_CEC_INT_STATUS_0 0x998 | |
| #define HDMI_CEC_INT_STATUS_1 0x99C | |
| #define HDMI_CEC_INT_ENABLE_0 0x990 | |
| #define HDMI_CEC_INT_ENABLE_1 0x994 | |
| #define HDMI_CEC_RX_CONTROL 0x9B0 | |
| #define HDMI_CEC_RX_COUNT 0x9B4 | |
| #define HDMI_CEC_RX_CMD_HEADER 0x9B8 | |
| #define HDMI_CEC_RX_COMMAND 0x9BC | |
| #define HDMI_CEC_RX_OPERAND 0x9C0 | |
| #define HDMI_CEC_TX_FIFO_INT_MASK 0x64 | |
| #define HDMI_CEC_RETRANSMIT_CNT_INT_MASK 0x2 | |
| #define HDMI_CORE_CEC_RETRY 200 | |
| static void hdmi_cec_received_msg(struct hdmi_core_data *core) | |
| { | |
| u32 cnt = hdmi_read_reg(core->base, HDMI_CEC_RX_COUNT) & 0xff; | |
| /* While there are CEC frames in the FIFO */ | |
| while (cnt & 0x70) { | |
| /* and the frame doesn't have an error */ | |
| if (!(cnt & 0x80)) { | |
| struct cec_msg msg = {}; | |
| unsigned int i; | |
| /* then read the message */ | |
| msg.len = cnt & 0xf; | |
| if (msg.len > CEC_MAX_MSG_SIZE - 2) | |
| msg.len = CEC_MAX_MSG_SIZE - 2; | |
| msg.msg[0] = hdmi_read_reg(core->base, | |
| HDMI_CEC_RX_CMD_HEADER); | |
| msg.msg[1] = hdmi_read_reg(core->base, | |
| HDMI_CEC_RX_COMMAND); | |
| for (i = 0; i < msg.len; i++) { | |
| unsigned int reg = HDMI_CEC_RX_OPERAND + i * 4; | |
| msg.msg[2 + i] = | |
| hdmi_read_reg(core->base, reg); | |
| } | |
| msg.len += 2; | |
| cec_received_msg(core->adap, &msg); | |
| } | |
| /* Clear the current frame from the FIFO */ | |
| hdmi_write_reg(core->base, HDMI_CEC_RX_CONTROL, 1); | |
| /* Wait until the current frame is cleared */ | |
| while (hdmi_read_reg(core->base, HDMI_CEC_RX_CONTROL) & 1) | |
| udelay(1); | |
| /* | |
| * Re-read the count register and loop to see if there are | |
| * more messages in the FIFO. | |
| */ | |
| cnt = hdmi_read_reg(core->base, HDMI_CEC_RX_COUNT) & 0xff; | |
| } | |
| } | |
| void hdmi4_cec_irq(struct hdmi_core_data *core) | |
| { | |
| u32 stat0 = hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_0); | |
| u32 stat1 = hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_1); | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_0, stat0); | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, stat1); | |
| if (stat0 & 0x20) { | |
| cec_transmit_done(core->adap, CEC_TX_STATUS_OK, | |
| 0, 0, 0, 0); | |
| REG_FLD_MOD(core->base, HDMI_CEC_DBG_3, 0x1, 7, 7); | |
| } else if (stat1 & 0x02) { | |
| u32 dbg3 = hdmi_read_reg(core->base, HDMI_CEC_DBG_3); | |
| cec_transmit_done(core->adap, | |
| CEC_TX_STATUS_NACK | | |
| CEC_TX_STATUS_MAX_RETRIES, | |
| 0, (dbg3 >> 4) & 7, 0, 0); | |
| REG_FLD_MOD(core->base, HDMI_CEC_DBG_3, 0x1, 7, 7); | |
| } | |
| if (stat0 & 0x02) | |
| hdmi_cec_received_msg(core); | |
| } | |
| static bool hdmi_cec_clear_tx_fifo(struct cec_adapter *adap) | |
| { | |
| struct hdmi_core_data *core = cec_get_drvdata(adap); | |
| int retry = HDMI_CORE_CEC_RETRY; | |
| int temp; | |
| REG_FLD_MOD(core->base, HDMI_CEC_DBG_3, 0x1, 7, 7); | |
| while (retry) { | |
| temp = hdmi_read_reg(core->base, HDMI_CEC_DBG_3); | |
| if (FLD_GET(temp, 7, 7) == 0) | |
| break; | |
| retry--; | |
| } | |
| return retry != 0; | |
| } | |
| static bool hdmi_cec_clear_rx_fifo(struct cec_adapter *adap) | |
| { | |
| struct hdmi_core_data *core = cec_get_drvdata(adap); | |
| int retry = HDMI_CORE_CEC_RETRY; | |
| int temp; | |
| hdmi_write_reg(core->base, HDMI_CEC_RX_CONTROL, 0x3); | |
| retry = HDMI_CORE_CEC_RETRY; | |
| while (retry) { | |
| temp = hdmi_read_reg(core->base, HDMI_CEC_RX_CONTROL); | |
| if (FLD_GET(temp, 1, 0) == 0) | |
| break; | |
| retry--; | |
| } | |
| return retry != 0; | |
| } | |
| static int hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable) | |
| { | |
| struct hdmi_core_data *core = cec_get_drvdata(adap); | |
| int temp, err; | |
| if (!enable) { | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_ENABLE_0, 0); | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_ENABLE_1, 0); | |
| REG_FLD_MOD(core->base, HDMI_CORE_SYS_INTR_UNMASK4, 0, 3, 3); | |
| hdmi_wp_clear_irqenable(core->wp, HDMI_IRQ_CORE); | |
| hdmi_wp_set_irqstatus(core->wp, HDMI_IRQ_CORE); | |
| hdmi4_core_disable(NULL); | |
| return 0; | |
| } | |
| err = hdmi4_core_enable(NULL); | |
| if (err) | |
| return err; | |
| /* Clear TX FIFO */ | |
| if (!hdmi_cec_clear_tx_fifo(adap)) { | |
| pr_err("cec-%s: could not clear TX FIFO\n", adap->name); | |
| return -EIO; | |
| } | |
| /* Clear RX FIFO */ | |
| if (!hdmi_cec_clear_rx_fifo(adap)) { | |
| pr_err("cec-%s: could not clear RX FIFO\n", adap->name); | |
| return -EIO; | |
| } | |
| /* Clear CEC interrupts */ | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, | |
| hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_1)); | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_0, | |
| hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_0)); | |
| /* Enable HDMI core interrupts */ | |
| hdmi_wp_set_irqenable(core->wp, HDMI_IRQ_CORE); | |
| /* Unmask CEC interrupt */ | |
| REG_FLD_MOD(core->base, HDMI_CORE_SYS_INTR_UNMASK4, 0x1, 3, 3); | |
| /* | |
| * Enable CEC interrupts: | |
| * Transmit Buffer Full/Empty Change event | |
| * Receiver FIFO Not Empty event | |
| */ | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_ENABLE_0, 0x22); | |
| /* | |
| * Enable CEC interrupts: | |
| * Frame Retransmit Count Exceeded event | |
| */ | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_ENABLE_1, 0x02); | |
| /* cec calibration enable (self clearing) */ | |
| hdmi_write_reg(core->base, HDMI_CEC_SETUP, 0x03); | |
| msleep(20); | |
| hdmi_write_reg(core->base, HDMI_CEC_SETUP, 0x04); | |
| temp = hdmi_read_reg(core->base, HDMI_CEC_SETUP); | |
| if (FLD_GET(temp, 4, 4) != 0) { | |
| temp = FLD_MOD(temp, 0, 4, 4); | |
| hdmi_write_reg(core->base, HDMI_CEC_SETUP, temp); | |
| /* | |
| * If we enabled CEC in middle of a CEC message on the bus, | |
| * we could have start bit irregularity and/or short | |
| * pulse event. Clear them now. | |
| */ | |
| temp = hdmi_read_reg(core->base, HDMI_CEC_INT_STATUS_1); | |
| temp = FLD_MOD(0x0, 0x5, 2, 0); | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, temp); | |
| } | |
| return 0; | |
| } | |
| static int hdmi_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr) | |
| { | |
| struct hdmi_core_data *core = cec_get_drvdata(adap); | |
| u32 v; | |
| if (log_addr == CEC_LOG_ADDR_INVALID) { | |
| hdmi_write_reg(core->base, HDMI_CEC_CA_7_0, 0); | |
| hdmi_write_reg(core->base, HDMI_CEC_CA_15_8, 0); | |
| return 0; | |
| } | |
| if (log_addr <= 7) { | |
| v = hdmi_read_reg(core->base, HDMI_CEC_CA_7_0); | |
| v |= 1 << log_addr; | |
| hdmi_write_reg(core->base, HDMI_CEC_CA_7_0, v); | |
| } else { | |
| v = hdmi_read_reg(core->base, HDMI_CEC_CA_15_8); | |
| v |= 1 << (log_addr - 8); | |
| hdmi_write_reg(core->base, HDMI_CEC_CA_15_8, v); | |
| } | |
| return 0; | |
| } | |
| static int hdmi_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, | |
| u32 signal_free_time, struct cec_msg *msg) | |
| { | |
| struct hdmi_core_data *core = cec_get_drvdata(adap); | |
| int temp; | |
| u32 i; | |
| /* Clear TX FIFO */ | |
| if (!hdmi_cec_clear_tx_fifo(adap)) { | |
| pr_err("cec-%s: could not clear TX FIFO for transmit\n", | |
| adap->name); | |
| return -EIO; | |
| } | |
| /* Clear TX interrupts */ | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_0, | |
| HDMI_CEC_TX_FIFO_INT_MASK); | |
| hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, | |
| HDMI_CEC_RETRANSMIT_CNT_INT_MASK); | |
| /* Set the retry count */ | |
| REG_FLD_MOD(core->base, HDMI_CEC_DBG_3, attempts - 1, 6, 4); | |
| /* Set the initiator addresses */ | |
| hdmi_write_reg(core->base, HDMI_CEC_TX_INIT, cec_msg_initiator(msg)); | |
| /* Set destination id */ | |
| temp = cec_msg_destination(msg); | |
| if (msg->len == 1) | |
| temp |= 0x80; | |
| hdmi_write_reg(core->base, HDMI_CEC_TX_DEST, temp); | |
| if (msg->len == 1) | |
| return 0; | |
| /* Setup command and arguments for the command */ | |
| hdmi_write_reg(core->base, HDMI_CEC_TX_COMMAND, msg->msg[1]); | |
| for (i = 0; i < msg->len - 2; i++) | |
| hdmi_write_reg(core->base, HDMI_CEC_TX_OPERAND + i * 4, | |
| msg->msg[2 + i]); | |
| /* Operand count */ | |
| hdmi_write_reg(core->base, HDMI_CEC_TRANSMIT_DATA, | |
| (msg->len - 2) | 0x10); | |
| return 0; | |
| } | |
| static const struct cec_adap_ops hdmi_cec_adap_ops = { | |
| .adap_enable = hdmi_cec_adap_enable, | |
| .adap_log_addr = hdmi_cec_adap_log_addr, | |
| .adap_transmit = hdmi_cec_adap_transmit, | |
| }; | |
| void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, u16 pa) | |
| { | |
| cec_s_phys_addr(core->adap, pa, false); | |
| } | |
| int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core, | |
| struct hdmi_wp_data *wp) | |
| { | |
| const u32 caps = CEC_CAP_TRANSMIT | CEC_CAP_LOG_ADDRS | | |
| CEC_CAP_PASSTHROUGH | CEC_CAP_RC; | |
| int ret; | |
| core->adap = cec_allocate_adapter(&hdmi_cec_adap_ops, core, | |
| "omap4", caps, CEC_MAX_LOG_ADDRS); | |
| ret = PTR_ERR_OR_ZERO(core->adap); | |
| if (ret < 0) | |
| return ret; | |
| core->wp = wp; | |
| /* | |
| * Initialize CEC clock divider: CEC needs 2MHz clock hence | |
| * set the devider to 24 to get 48/24=2MHz clock | |
| */ | |
| REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0x18, 5, 0); | |
| ret = cec_register_adapter(core->adap, &pdev->dev); | |
| if (ret < 0) { | |
| cec_delete_adapter(core->adap); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| void hdmi4_cec_uninit(struct hdmi_core_data *core) | |
| { | |
| cec_unregister_adapter(core->adap); | |
| } |