| /* | |
| * Intel MIC Platform Software Stack (MPSS) | |
| * | |
| * Copyright(c) 2016 Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License, version 2, as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * The full GNU General Public License is included in this distribution in | |
| * the file called "COPYING". | |
| * | |
| * Intel Virtio Over PCIe (VOP) driver. | |
| * | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/poll.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/mic_common.h> | |
| #include "../common/mic_dev.h" | |
| #include <linux/mic_ioctl.h> | |
| #include "vop_main.h" | |
| /* Helper API to obtain the VOP PCIe device */ | |
| static inline struct device *vop_dev(struct vop_vdev *vdev) | |
| { | |
| return vdev->vpdev->dev.parent; | |
| } | |
| /* Helper API to check if a virtio device is initialized */ | |
| static inline int vop_vdev_inited(struct vop_vdev *vdev) | |
| { | |
| if (!vdev) | |
| return -EINVAL; | |
| /* Device has not been created yet */ | |
| if (!vdev->dd || !vdev->dd->type) { | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, -EINVAL); | |
| return -EINVAL; | |
| } | |
| /* Device has been removed/deleted */ | |
| if (vdev->dd->type == -1) { | |
| dev_dbg(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, -ENODEV); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static void _vop_notify(struct vringh *vrh) | |
| { | |
| struct vop_vringh *vvrh = container_of(vrh, struct vop_vringh, vrh); | |
| struct vop_vdev *vdev = vvrh->vdev; | |
| struct vop_device *vpdev = vdev->vpdev; | |
| s8 db = vdev->dc->h2c_vdev_db; | |
| if (db != -1) | |
| vpdev->hw_ops->send_intr(vpdev, db); | |
| } | |
| static void vop_virtio_init_post(struct vop_vdev *vdev) | |
| { | |
| struct mic_vqconfig *vqconfig = mic_vq_config(vdev->dd); | |
| struct vop_device *vpdev = vdev->vpdev; | |
| int i, used_size; | |
| for (i = 0; i < vdev->dd->num_vq; i++) { | |
| used_size = PAGE_ALIGN(sizeof(u16) * 3 + | |
| sizeof(struct vring_used_elem) * | |
| le16_to_cpu(vqconfig->num)); | |
| if (!le64_to_cpu(vqconfig[i].used_address)) { | |
| dev_warn(vop_dev(vdev), "used_address zero??\n"); | |
| continue; | |
| } | |
| vdev->vvr[i].vrh.vring.used = | |
| (void __force *)vpdev->hw_ops->ioremap( | |
| vpdev, | |
| le64_to_cpu(vqconfig[i].used_address), | |
| used_size); | |
| } | |
| vdev->dc->used_address_updated = 0; | |
| dev_info(vop_dev(vdev), "%s: device type %d LINKUP\n", | |
| __func__, vdev->virtio_id); | |
| } | |
| static inline void vop_virtio_device_reset(struct vop_vdev *vdev) | |
| { | |
| int i; | |
| dev_dbg(vop_dev(vdev), "%s: status %d device type %d RESET\n", | |
| __func__, vdev->dd->status, vdev->virtio_id); | |
| for (i = 0; i < vdev->dd->num_vq; i++) | |
| /* | |
| * Avoid lockdep false positive. The + 1 is for the vop | |
| * mutex which is held in the reset devices code path. | |
| */ | |
| mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1); | |
| /* 0 status means "reset" */ | |
| vdev->dd->status = 0; | |
| vdev->dc->vdev_reset = 0; | |
| vdev->dc->host_ack = 1; | |
| for (i = 0; i < vdev->dd->num_vq; i++) { | |
| struct vringh *vrh = &vdev->vvr[i].vrh; | |
| vdev->vvr[i].vring.info->avail_idx = 0; | |
| vrh->completed = 0; | |
| vrh->last_avail_idx = 0; | |
| vrh->last_used_idx = 0; | |
| } | |
| for (i = 0; i < vdev->dd->num_vq; i++) | |
| mutex_unlock(&vdev->vvr[i].vr_mutex); | |
| } | |
| static void vop_virtio_reset_devices(struct vop_info *vi) | |
| { | |
| struct list_head *pos, *tmp; | |
| struct vop_vdev *vdev; | |
| list_for_each_safe(pos, tmp, &vi->vdev_list) { | |
| vdev = list_entry(pos, struct vop_vdev, list); | |
| vop_virtio_device_reset(vdev); | |
| vdev->poll_wake = 1; | |
| wake_up(&vdev->waitq); | |
| } | |
| } | |
| static void vop_bh_handler(struct work_struct *work) | |
| { | |
| struct vop_vdev *vdev = container_of(work, struct vop_vdev, | |
| virtio_bh_work); | |
| if (vdev->dc->used_address_updated) | |
| vop_virtio_init_post(vdev); | |
| if (vdev->dc->vdev_reset) | |
| vop_virtio_device_reset(vdev); | |
| vdev->poll_wake = 1; | |
| wake_up(&vdev->waitq); | |
| } | |
| static irqreturn_t _vop_virtio_intr_handler(int irq, void *data) | |
| { | |
| struct vop_vdev *vdev = data; | |
| struct vop_device *vpdev = vdev->vpdev; | |
| vpdev->hw_ops->ack_interrupt(vpdev, vdev->virtio_db); | |
| schedule_work(&vdev->virtio_bh_work); | |
| return IRQ_HANDLED; | |
| } | |
| static int vop_virtio_config_change(struct vop_vdev *vdev, void *argp) | |
| { | |
| DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); | |
| int ret = 0, retry, i; | |
| struct vop_device *vpdev = vdev->vpdev; | |
| struct vop_info *vi = dev_get_drvdata(&vpdev->dev); | |
| struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); | |
| s8 db = bootparam->h2c_config_db; | |
| mutex_lock(&vi->vop_mutex); | |
| for (i = 0; i < vdev->dd->num_vq; i++) | |
| mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1); | |
| if (db == -1 || vdev->dd->type == -1) { | |
| ret = -EIO; | |
| goto exit; | |
| } | |
| memcpy(mic_vq_configspace(vdev->dd), argp, vdev->dd->config_len); | |
| vdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED; | |
| vpdev->hw_ops->send_intr(vpdev, db); | |
| for (retry = 100; retry--;) { | |
| ret = wait_event_timeout(wake, vdev->dc->guest_ack, | |
| msecs_to_jiffies(100)); | |
| if (ret) | |
| break; | |
| } | |
| dev_dbg(vop_dev(vdev), | |
| "%s %d retry: %d\n", __func__, __LINE__, retry); | |
| vdev->dc->config_change = 0; | |
| vdev->dc->guest_ack = 0; | |
| exit: | |
| for (i = 0; i < vdev->dd->num_vq; i++) | |
| mutex_unlock(&vdev->vvr[i].vr_mutex); | |
| mutex_unlock(&vi->vop_mutex); | |
| return ret; | |
| } | |
| static int vop_copy_dp_entry(struct vop_vdev *vdev, | |
| struct mic_device_desc *argp, __u8 *type, | |
| struct mic_device_desc **devpage) | |
| { | |
| struct vop_device *vpdev = vdev->vpdev; | |
| struct mic_device_desc *devp; | |
| struct mic_vqconfig *vqconfig; | |
| int ret = 0, i; | |
| bool slot_found = false; | |
| vqconfig = mic_vq_config(argp); | |
| for (i = 0; i < argp->num_vq; i++) { | |
| if (le16_to_cpu(vqconfig[i].num) > MIC_MAX_VRING_ENTRIES) { | |
| ret = -EINVAL; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| goto exit; | |
| } | |
| } | |
| /* Find the first free device page entry */ | |
| for (i = sizeof(struct mic_bootparam); | |
| i < MIC_DP_SIZE - mic_total_desc_size(argp); | |
| i += mic_total_desc_size(devp)) { | |
| devp = vpdev->hw_ops->get_dp(vpdev) + i; | |
| if (devp->type == 0 || devp->type == -1) { | |
| slot_found = true; | |
| break; | |
| } | |
| } | |
| if (!slot_found) { | |
| ret = -EINVAL; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| goto exit; | |
| } | |
| /* | |
| * Save off the type before doing the memcpy. Type will be set in the | |
| * end after completing all initialization for the new device. | |
| */ | |
| *type = argp->type; | |
| argp->type = 0; | |
| memcpy(devp, argp, mic_desc_size(argp)); | |
| *devpage = devp; | |
| exit: | |
| return ret; | |
| } | |
| static void vop_init_device_ctrl(struct vop_vdev *vdev, | |
| struct mic_device_desc *devpage) | |
| { | |
| struct mic_device_ctrl *dc; | |
| dc = (void *)devpage + mic_aligned_desc_size(devpage); | |
| dc->config_change = 0; | |
| dc->guest_ack = 0; | |
| dc->vdev_reset = 0; | |
| dc->host_ack = 0; | |
| dc->used_address_updated = 0; | |
| dc->c2h_vdev_db = -1; | |
| dc->h2c_vdev_db = -1; | |
| vdev->dc = dc; | |
| } | |
| static int vop_virtio_add_device(struct vop_vdev *vdev, | |
| struct mic_device_desc *argp) | |
| { | |
| struct vop_info *vi = vdev->vi; | |
| struct vop_device *vpdev = vi->vpdev; | |
| struct mic_device_desc *dd = NULL; | |
| struct mic_vqconfig *vqconfig; | |
| int vr_size, i, j, ret; | |
| u8 type = 0; | |
| s8 db = -1; | |
| char irqname[16]; | |
| struct mic_bootparam *bootparam; | |
| u16 num; | |
| dma_addr_t vr_addr; | |
| bootparam = vpdev->hw_ops->get_dp(vpdev); | |
| init_waitqueue_head(&vdev->waitq); | |
| INIT_LIST_HEAD(&vdev->list); | |
| vdev->vpdev = vpdev; | |
| ret = vop_copy_dp_entry(vdev, argp, &type, &dd); | |
| if (ret) { | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| return ret; | |
| } | |
| vop_init_device_ctrl(vdev, dd); | |
| vdev->dd = dd; | |
| vdev->virtio_id = type; | |
| vqconfig = mic_vq_config(dd); | |
| INIT_WORK(&vdev->virtio_bh_work, vop_bh_handler); | |
| for (i = 0; i < dd->num_vq; i++) { | |
| struct vop_vringh *vvr = &vdev->vvr[i]; | |
| struct mic_vring *vr = &vdev->vvr[i].vring; | |
| num = le16_to_cpu(vqconfig[i].num); | |
| mutex_init(&vvr->vr_mutex); | |
| vr_size = PAGE_ALIGN(vring_size(num, MIC_VIRTIO_RING_ALIGN) + | |
| sizeof(struct _mic_vring_info)); | |
| vr->va = (void *) | |
| __get_free_pages(GFP_KERNEL | __GFP_ZERO, | |
| get_order(vr_size)); | |
| if (!vr->va) { | |
| ret = -ENOMEM; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| goto err; | |
| } | |
| vr->len = vr_size; | |
| vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN); | |
| vr->info->magic = cpu_to_le32(MIC_MAGIC + vdev->virtio_id + i); | |
| vr_addr = dma_map_single(&vpdev->dev, vr->va, vr_size, | |
| DMA_BIDIRECTIONAL); | |
| if (dma_mapping_error(&vpdev->dev, vr_addr)) { | |
| free_pages((unsigned long)vr->va, get_order(vr_size)); | |
| ret = -ENOMEM; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| goto err; | |
| } | |
| vqconfig[i].address = cpu_to_le64(vr_addr); | |
| vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN); | |
| ret = vringh_init_kern(&vvr->vrh, | |
| *(u32 *)mic_vq_features(vdev->dd), | |
| num, false, vr->vr.desc, vr->vr.avail, | |
| vr->vr.used); | |
| if (ret) { | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| goto err; | |
| } | |
| vringh_kiov_init(&vvr->riov, NULL, 0); | |
| vringh_kiov_init(&vvr->wiov, NULL, 0); | |
| vvr->head = USHRT_MAX; | |
| vvr->vdev = vdev; | |
| vvr->vrh.notify = _vop_notify; | |
| dev_dbg(&vpdev->dev, | |
| "%s %d index %d va %p info %p vr_size 0x%x\n", | |
| __func__, __LINE__, i, vr->va, vr->info, vr_size); | |
| vvr->buf = (void *)__get_free_pages(GFP_KERNEL, | |
| get_order(VOP_INT_DMA_BUF_SIZE)); | |
| vvr->buf_da = dma_map_single(&vpdev->dev, | |
| vvr->buf, VOP_INT_DMA_BUF_SIZE, | |
| DMA_BIDIRECTIONAL); | |
| } | |
| snprintf(irqname, sizeof(irqname), "vop%dvirtio%d", vpdev->index, | |
| vdev->virtio_id); | |
| vdev->virtio_db = vpdev->hw_ops->next_db(vpdev); | |
| vdev->virtio_cookie = vpdev->hw_ops->request_irq(vpdev, | |
| _vop_virtio_intr_handler, irqname, vdev, | |
| vdev->virtio_db); | |
| if (IS_ERR(vdev->virtio_cookie)) { | |
| ret = PTR_ERR(vdev->virtio_cookie); | |
| dev_dbg(&vpdev->dev, "request irq failed\n"); | |
| goto err; | |
| } | |
| vdev->dc->c2h_vdev_db = vdev->virtio_db; | |
| /* | |
| * Order the type update with previous stores. This write barrier | |
| * is paired with the corresponding read barrier before the uncached | |
| * system memory read of the type, on the card while scanning the | |
| * device page. | |
| */ | |
| smp_wmb(); | |
| dd->type = type; | |
| argp->type = type; | |
| if (bootparam) { | |
| db = bootparam->h2c_config_db; | |
| if (db != -1) | |
| vpdev->hw_ops->send_intr(vpdev, db); | |
| } | |
| dev_dbg(&vpdev->dev, "Added virtio id %d db %d\n", dd->type, db); | |
| return 0; | |
| err: | |
| vqconfig = mic_vq_config(dd); | |
| for (j = 0; j < i; j++) { | |
| struct vop_vringh *vvr = &vdev->vvr[j]; | |
| dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[j].address), | |
| vvr->vring.len, DMA_BIDIRECTIONAL); | |
| free_pages((unsigned long)vvr->vring.va, | |
| get_order(vvr->vring.len)); | |
| } | |
| return ret; | |
| } | |
| static void vop_dev_remove(struct vop_info *pvi, struct mic_device_ctrl *devp, | |
| struct vop_device *vpdev) | |
| { | |
| struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); | |
| s8 db; | |
| int ret, retry; | |
| DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); | |
| devp->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE; | |
| db = bootparam->h2c_config_db; | |
| if (db != -1) | |
| vpdev->hw_ops->send_intr(vpdev, db); | |
| else | |
| goto done; | |
| for (retry = 15; retry--;) { | |
| ret = wait_event_timeout(wake, devp->guest_ack, | |
| msecs_to_jiffies(1000)); | |
| if (ret) | |
| break; | |
| } | |
| done: | |
| devp->config_change = 0; | |
| devp->guest_ack = 0; | |
| } | |
| static void vop_virtio_del_device(struct vop_vdev *vdev) | |
| { | |
| struct vop_info *vi = vdev->vi; | |
| struct vop_device *vpdev = vdev->vpdev; | |
| int i; | |
| struct mic_vqconfig *vqconfig; | |
| struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); | |
| if (!bootparam) | |
| goto skip_hot_remove; | |
| vop_dev_remove(vi, vdev->dc, vpdev); | |
| skip_hot_remove: | |
| vpdev->hw_ops->free_irq(vpdev, vdev->virtio_cookie, vdev); | |
| flush_work(&vdev->virtio_bh_work); | |
| vqconfig = mic_vq_config(vdev->dd); | |
| for (i = 0; i < vdev->dd->num_vq; i++) { | |
| struct vop_vringh *vvr = &vdev->vvr[i]; | |
| dma_unmap_single(&vpdev->dev, | |
| vvr->buf_da, VOP_INT_DMA_BUF_SIZE, | |
| DMA_BIDIRECTIONAL); | |
| free_pages((unsigned long)vvr->buf, | |
| get_order(VOP_INT_DMA_BUF_SIZE)); | |
| vringh_kiov_cleanup(&vvr->riov); | |
| vringh_kiov_cleanup(&vvr->wiov); | |
| dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[i].address), | |
| vvr->vring.len, DMA_BIDIRECTIONAL); | |
| free_pages((unsigned long)vvr->vring.va, | |
| get_order(vvr->vring.len)); | |
| } | |
| /* | |
| * Order the type update with previous stores. This write barrier | |
| * is paired with the corresponding read barrier before the uncached | |
| * system memory read of the type, on the card while scanning the | |
| * device page. | |
| */ | |
| smp_wmb(); | |
| vdev->dd->type = -1; | |
| } | |
| /* | |
| * vop_sync_dma - Wrapper for synchronous DMAs. | |
| * | |
| * @dev - The address of the pointer to the device instance used | |
| * for DMA registration. | |
| * @dst - destination DMA address. | |
| * @src - source DMA address. | |
| * @len - size of the transfer. | |
| * | |
| * Return DMA_SUCCESS on success | |
| */ | |
| static int vop_sync_dma(struct vop_vdev *vdev, dma_addr_t dst, dma_addr_t src, | |
| size_t len) | |
| { | |
| int err = 0; | |
| struct dma_device *ddev; | |
| struct dma_async_tx_descriptor *tx; | |
| struct vop_info *vi = dev_get_drvdata(&vdev->vpdev->dev); | |
| struct dma_chan *vop_ch = vi->dma_ch; | |
| if (!vop_ch) { | |
| err = -EBUSY; | |
| goto error; | |
| } | |
| ddev = vop_ch->device; | |
| tx = ddev->device_prep_dma_memcpy(vop_ch, dst, src, len, | |
| DMA_PREP_FENCE); | |
| if (!tx) { | |
| err = -ENOMEM; | |
| goto error; | |
| } else { | |
| dma_cookie_t cookie; | |
| cookie = tx->tx_submit(tx); | |
| if (dma_submit_error(cookie)) { | |
| err = -ENOMEM; | |
| goto error; | |
| } | |
| dma_async_issue_pending(vop_ch); | |
| err = dma_sync_wait(vop_ch, cookie); | |
| } | |
| error: | |
| if (err) | |
| dev_err(&vi->vpdev->dev, "%s %d err %d\n", | |
| __func__, __LINE__, err); | |
| return err; | |
| } | |
| #define VOP_USE_DMA true | |
| /* | |
| * Initiates the copies across the PCIe bus from card memory to a user | |
| * space buffer. When transfers are done using DMA, source/destination | |
| * addresses and transfer length must follow the alignment requirements of | |
| * the MIC DMA engine. | |
| */ | |
| static int vop_virtio_copy_to_user(struct vop_vdev *vdev, void __user *ubuf, | |
| size_t len, u64 daddr, size_t dlen, | |
| int vr_idx) | |
| { | |
| struct vop_device *vpdev = vdev->vpdev; | |
| void __iomem *dbuf = vpdev->hw_ops->ioremap(vpdev, daddr, len); | |
| struct vop_vringh *vvr = &vdev->vvr[vr_idx]; | |
| struct vop_info *vi = dev_get_drvdata(&vpdev->dev); | |
| size_t dma_alignment = 1 << vi->dma_ch->device->copy_align; | |
| bool x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1); | |
| size_t dma_offset, partlen; | |
| int err; | |
| if (!VOP_USE_DMA) { | |
| if (copy_to_user(ubuf, (void __force *)dbuf, len)) { | |
| err = -EFAULT; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, err); | |
| goto err; | |
| } | |
| vdev->in_bytes += len; | |
| err = 0; | |
| goto err; | |
| } | |
| dma_offset = daddr - round_down(daddr, dma_alignment); | |
| daddr -= dma_offset; | |
| len += dma_offset; | |
| /* | |
| * X100 uses DMA addresses as seen by the card so adding | |
| * the aperture base is not required for DMA. However x200 | |
| * requires DMA addresses to be an offset into the bar so | |
| * add the aperture base for x200. | |
| */ | |
| if (x200) | |
| daddr += vpdev->aper->pa; | |
| while (len) { | |
| partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE); | |
| err = vop_sync_dma(vdev, vvr->buf_da, daddr, | |
| ALIGN(partlen, dma_alignment)); | |
| if (err) { | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, err); | |
| goto err; | |
| } | |
| if (copy_to_user(ubuf, vvr->buf + dma_offset, | |
| partlen - dma_offset)) { | |
| err = -EFAULT; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, err); | |
| goto err; | |
| } | |
| daddr += partlen; | |
| ubuf += partlen; | |
| dbuf += partlen; | |
| vdev->in_bytes_dma += partlen; | |
| vdev->in_bytes += partlen; | |
| len -= partlen; | |
| dma_offset = 0; | |
| } | |
| err = 0; | |
| err: | |
| vpdev->hw_ops->iounmap(vpdev, dbuf); | |
| dev_dbg(vop_dev(vdev), | |
| "%s: ubuf %p dbuf %p len 0x%lx vr_idx 0x%x\n", | |
| __func__, ubuf, dbuf, len, vr_idx); | |
| return err; | |
| } | |
| /* | |
| * Initiates copies across the PCIe bus from a user space buffer to card | |
| * memory. When transfers are done using DMA, source/destination addresses | |
| * and transfer length must follow the alignment requirements of the MIC | |
| * DMA engine. | |
| */ | |
| static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf, | |
| size_t len, u64 daddr, size_t dlen, | |
| int vr_idx) | |
| { | |
| struct vop_device *vpdev = vdev->vpdev; | |
| void __iomem *dbuf = vpdev->hw_ops->ioremap(vpdev, daddr, len); | |
| struct vop_vringh *vvr = &vdev->vvr[vr_idx]; | |
| struct vop_info *vi = dev_get_drvdata(&vdev->vpdev->dev); | |
| size_t dma_alignment = 1 << vi->dma_ch->device->copy_align; | |
| bool x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1); | |
| size_t partlen; | |
| bool dma = VOP_USE_DMA; | |
| int err = 0; | |
| if (daddr & (dma_alignment - 1)) { | |
| vdev->tx_dst_unaligned += len; | |
| dma = false; | |
| } else if (ALIGN(len, dma_alignment) > dlen) { | |
| vdev->tx_len_unaligned += len; | |
| dma = false; | |
| } | |
| if (!dma) | |
| goto memcpy; | |
| /* | |
| * X100 uses DMA addresses as seen by the card so adding | |
| * the aperture base is not required for DMA. However x200 | |
| * requires DMA addresses to be an offset into the bar so | |
| * add the aperture base for x200. | |
| */ | |
| if (x200) | |
| daddr += vpdev->aper->pa; | |
| while (len) { | |
| partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE); | |
| if (copy_from_user(vvr->buf, ubuf, partlen)) { | |
| err = -EFAULT; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, err); | |
| goto err; | |
| } | |
| err = vop_sync_dma(vdev, daddr, vvr->buf_da, | |
| ALIGN(partlen, dma_alignment)); | |
| if (err) { | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, err); | |
| goto err; | |
| } | |
| daddr += partlen; | |
| ubuf += partlen; | |
| dbuf += partlen; | |
| vdev->out_bytes_dma += partlen; | |
| vdev->out_bytes += partlen; | |
| len -= partlen; | |
| } | |
| memcpy: | |
| /* | |
| * We are copying to IO below and should ideally use something | |
| * like copy_from_user_toio(..) if it existed. | |
| */ | |
| if (copy_from_user((void __force *)dbuf, ubuf, len)) { | |
| err = -EFAULT; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, err); | |
| goto err; | |
| } | |
| vdev->out_bytes += len; | |
| err = 0; | |
| err: | |
| vpdev->hw_ops->iounmap(vpdev, dbuf); | |
| dev_dbg(vop_dev(vdev), | |
| "%s: ubuf %p dbuf %p len 0x%lx vr_idx 0x%x\n", | |
| __func__, ubuf, dbuf, len, vr_idx); | |
| return err; | |
| } | |
| #define MIC_VRINGH_READ true | |
| /* Determine the total number of bytes consumed in a VRINGH KIOV */ | |
| static inline u32 vop_vringh_iov_consumed(struct vringh_kiov *iov) | |
| { | |
| int i; | |
| u32 total = iov->consumed; | |
| for (i = 0; i < iov->i; i++) | |
| total += iov->iov[i].iov_len; | |
| return total; | |
| } | |
| /* | |
| * Traverse the VRINGH KIOV and issue the APIs to trigger the copies. | |
| * This API is heavily based on the vringh_iov_xfer(..) implementation | |
| * in vringh.c. The reason we cannot reuse vringh_iov_pull_kern(..) | |
| * and vringh_iov_push_kern(..) directly is because there is no | |
| * way to override the VRINGH xfer(..) routines as of v3.10. | |
| */ | |
| static int vop_vringh_copy(struct vop_vdev *vdev, struct vringh_kiov *iov, | |
| void __user *ubuf, size_t len, bool read, int vr_idx, | |
| size_t *out_len) | |
| { | |
| int ret = 0; | |
| size_t partlen, tot_len = 0; | |
| while (len && iov->i < iov->used) { | |
| struct kvec *kiov = &iov->iov[iov->i]; | |
| partlen = min(kiov->iov_len, len); | |
| if (read) | |
| ret = vop_virtio_copy_to_user(vdev, ubuf, partlen, | |
| (u64)kiov->iov_base, | |
| kiov->iov_len, | |
| vr_idx); | |
| else | |
| ret = vop_virtio_copy_from_user(vdev, ubuf, partlen, | |
| (u64)kiov->iov_base, | |
| kiov->iov_len, | |
| vr_idx); | |
| if (ret) { | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| break; | |
| } | |
| len -= partlen; | |
| ubuf += partlen; | |
| tot_len += partlen; | |
| iov->consumed += partlen; | |
| kiov->iov_len -= partlen; | |
| kiov->iov_base += partlen; | |
| if (!kiov->iov_len) { | |
| /* Fix up old iov element then increment. */ | |
| kiov->iov_len = iov->consumed; | |
| kiov->iov_base -= iov->consumed; | |
| iov->consumed = 0; | |
| iov->i++; | |
| } | |
| } | |
| *out_len = tot_len; | |
| return ret; | |
| } | |
| /* | |
| * Use the standard VRINGH infrastructure in the kernel to fetch new | |
| * descriptors, initiate the copies and update the used ring. | |
| */ | |
| static int _vop_virtio_copy(struct vop_vdev *vdev, struct mic_copy_desc *copy) | |
| { | |
| int ret = 0; | |
| u32 iovcnt = copy->iovcnt; | |
| struct iovec iov; | |
| struct iovec __user *u_iov = copy->iov; | |
| void __user *ubuf = NULL; | |
| struct vop_vringh *vvr = &vdev->vvr[copy->vr_idx]; | |
| struct vringh_kiov *riov = &vvr->riov; | |
| struct vringh_kiov *wiov = &vvr->wiov; | |
| struct vringh *vrh = &vvr->vrh; | |
| u16 *head = &vvr->head; | |
| struct mic_vring *vr = &vvr->vring; | |
| size_t len = 0, out_len; | |
| copy->out_len = 0; | |
| /* Fetch a new IOVEC if all previous elements have been processed */ | |
| if (riov->i == riov->used && wiov->i == wiov->used) { | |
| ret = vringh_getdesc_kern(vrh, riov, wiov, | |
| head, GFP_KERNEL); | |
| /* Check if there are available descriptors */ | |
| if (ret <= 0) | |
| return ret; | |
| } | |
| while (iovcnt) { | |
| if (!len) { | |
| /* Copy over a new iovec from user space. */ | |
| ret = copy_from_user(&iov, u_iov, sizeof(*u_iov)); | |
| if (ret) { | |
| ret = -EINVAL; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| break; | |
| } | |
| len = iov.iov_len; | |
| ubuf = iov.iov_base; | |
| } | |
| /* Issue all the read descriptors first */ | |
| ret = vop_vringh_copy(vdev, riov, ubuf, len, | |
| MIC_VRINGH_READ, copy->vr_idx, &out_len); | |
| if (ret) { | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| break; | |
| } | |
| len -= out_len; | |
| ubuf += out_len; | |
| copy->out_len += out_len; | |
| /* Issue the write descriptors next */ | |
| ret = vop_vringh_copy(vdev, wiov, ubuf, len, | |
| !MIC_VRINGH_READ, copy->vr_idx, &out_len); | |
| if (ret) { | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, ret); | |
| break; | |
| } | |
| len -= out_len; | |
| ubuf += out_len; | |
| copy->out_len += out_len; | |
| if (!len) { | |
| /* One user space iovec is now completed */ | |
| iovcnt--; | |
| u_iov++; | |
| } | |
| /* Exit loop if all elements in KIOVs have been processed. */ | |
| if (riov->i == riov->used && wiov->i == wiov->used) | |
| break; | |
| } | |
| /* | |
| * Update the used ring if a descriptor was available and some data was | |
| * copied in/out and the user asked for a used ring update. | |
| */ | |
| if (*head != USHRT_MAX && copy->out_len && copy->update_used) { | |
| u32 total = 0; | |
| /* Determine the total data consumed */ | |
| total += vop_vringh_iov_consumed(riov); | |
| total += vop_vringh_iov_consumed(wiov); | |
| vringh_complete_kern(vrh, *head, total); | |
| *head = USHRT_MAX; | |
| if (vringh_need_notify_kern(vrh) > 0) | |
| vringh_notify(vrh); | |
| vringh_kiov_cleanup(riov); | |
| vringh_kiov_cleanup(wiov); | |
| /* Update avail idx for user space */ | |
| vr->info->avail_idx = vrh->last_avail_idx; | |
| } | |
| return ret; | |
| } | |
| static inline int vop_verify_copy_args(struct vop_vdev *vdev, | |
| struct mic_copy_desc *copy) | |
| { | |
| if (!vdev || copy->vr_idx >= vdev->dd->num_vq) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /* Copy a specified number of virtio descriptors in a chain */ | |
| static int vop_virtio_copy_desc(struct vop_vdev *vdev, | |
| struct mic_copy_desc *copy) | |
| { | |
| int err; | |
| struct vop_vringh *vvr; | |
| err = vop_verify_copy_args(vdev, copy); | |
| if (err) | |
| return err; | |
| vvr = &vdev->vvr[copy->vr_idx]; | |
| mutex_lock(&vvr->vr_mutex); | |
| if (!vop_vdevup(vdev)) { | |
| err = -ENODEV; | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, err); | |
| goto err; | |
| } | |
| err = _vop_virtio_copy(vdev, copy); | |
| if (err) { | |
| dev_err(vop_dev(vdev), "%s %d err %d\n", | |
| __func__, __LINE__, err); | |
| } | |
| err: | |
| mutex_unlock(&vvr->vr_mutex); | |
| return err; | |
| } | |
| static int vop_open(struct inode *inode, struct file *f) | |
| { | |
| struct vop_vdev *vdev; | |
| struct vop_info *vi = container_of(f->private_data, | |
| struct vop_info, miscdev); | |
| vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); | |
| if (!vdev) | |
| return -ENOMEM; | |
| vdev->vi = vi; | |
| mutex_init(&vdev->vdev_mutex); | |
| f->private_data = vdev; | |
| init_completion(&vdev->destroy); | |
| complete(&vdev->destroy); | |
| return 0; | |
| } | |
| static int vop_release(struct inode *inode, struct file *f) | |
| { | |
| struct vop_vdev *vdev = f->private_data, *vdev_tmp; | |
| struct vop_info *vi = vdev->vi; | |
| struct list_head *pos, *tmp; | |
| bool found = false; | |
| mutex_lock(&vdev->vdev_mutex); | |
| if (vdev->deleted) | |
| goto unlock; | |
| mutex_lock(&vi->vop_mutex); | |
| list_for_each_safe(pos, tmp, &vi->vdev_list) { | |
| vdev_tmp = list_entry(pos, struct vop_vdev, list); | |
| if (vdev == vdev_tmp) { | |
| vop_virtio_del_device(vdev); | |
| list_del(pos); | |
| found = true; | |
| break; | |
| } | |
| } | |
| mutex_unlock(&vi->vop_mutex); | |
| unlock: | |
| mutex_unlock(&vdev->vdev_mutex); | |
| if (!found) | |
| wait_for_completion(&vdev->destroy); | |
| f->private_data = NULL; | |
| kfree(vdev); | |
| return 0; | |
| } | |
| static long vop_ioctl(struct file *f, unsigned int cmd, unsigned long arg) | |
| { | |
| struct vop_vdev *vdev = f->private_data; | |
| struct vop_info *vi = vdev->vi; | |
| void __user *argp = (void __user *)arg; | |
| int ret; | |
| switch (cmd) { | |
| case MIC_VIRTIO_ADD_DEVICE: | |
| { | |
| struct mic_device_desc dd, *dd_config; | |
| if (copy_from_user(&dd, argp, sizeof(dd))) | |
| return -EFAULT; | |
| if (mic_aligned_desc_size(&dd) > MIC_MAX_DESC_BLK_SIZE || | |
| dd.num_vq > MIC_MAX_VRINGS) | |
| return -EINVAL; | |
| dd_config = kzalloc(mic_desc_size(&dd), GFP_KERNEL); | |
| if (!dd_config) | |
| return -ENOMEM; | |
| if (copy_from_user(dd_config, argp, mic_desc_size(&dd))) { | |
| ret = -EFAULT; | |
| goto free_ret; | |
| } | |
| /* Ensure desc has not changed between the two reads */ | |
| if (memcmp(&dd, dd_config, sizeof(dd))) { | |
| ret = -EINVAL; | |
| goto free_ret; | |
| } | |
| mutex_lock(&vdev->vdev_mutex); | |
| mutex_lock(&vi->vop_mutex); | |
| ret = vop_virtio_add_device(vdev, dd_config); | |
| if (ret) | |
| goto unlock_ret; | |
| list_add_tail(&vdev->list, &vi->vdev_list); | |
| unlock_ret: | |
| mutex_unlock(&vi->vop_mutex); | |
| mutex_unlock(&vdev->vdev_mutex); | |
| free_ret: | |
| kfree(dd_config); | |
| return ret; | |
| } | |
| case MIC_VIRTIO_COPY_DESC: | |
| { | |
| struct mic_copy_desc copy; | |
| mutex_lock(&vdev->vdev_mutex); | |
| ret = vop_vdev_inited(vdev); | |
| if (ret) | |
| goto _unlock_ret; | |
| if (copy_from_user(©, argp, sizeof(copy))) { | |
| ret = -EFAULT; | |
| goto _unlock_ret; | |
| } | |
| ret = vop_virtio_copy_desc(vdev, ©); | |
| if (ret < 0) | |
| goto _unlock_ret; | |
| if (copy_to_user( | |
| &((struct mic_copy_desc __user *)argp)->out_len, | |
| ©.out_len, sizeof(copy.out_len))) | |
| ret = -EFAULT; | |
| _unlock_ret: | |
| mutex_unlock(&vdev->vdev_mutex); | |
| return ret; | |
| } | |
| case MIC_VIRTIO_CONFIG_CHANGE: | |
| { | |
| void *buf; | |
| mutex_lock(&vdev->vdev_mutex); | |
| ret = vop_vdev_inited(vdev); | |
| if (ret) | |
| goto __unlock_ret; | |
| buf = kzalloc(vdev->dd->config_len, GFP_KERNEL); | |
| if (!buf) { | |
| ret = -ENOMEM; | |
| goto __unlock_ret; | |
| } | |
| if (copy_from_user(buf, argp, vdev->dd->config_len)) { | |
| ret = -EFAULT; | |
| goto done; | |
| } | |
| ret = vop_virtio_config_change(vdev, buf); | |
| done: | |
| kfree(buf); | |
| __unlock_ret: | |
| mutex_unlock(&vdev->vdev_mutex); | |
| return ret; | |
| } | |
| default: | |
| return -ENOIOCTLCMD; | |
| }; | |
| return 0; | |
| } | |
| /* | |
| * We return POLLIN | POLLOUT from poll when new buffers are enqueued, and | |
| * not when previously enqueued buffers may be available. This means that | |
| * in the card->host (TX) path, when userspace is unblocked by poll it | |
| * must drain all available descriptors or it can stall. | |
| */ | |
| static unsigned int vop_poll(struct file *f, poll_table *wait) | |
| { | |
| struct vop_vdev *vdev = f->private_data; | |
| int mask = 0; | |
| mutex_lock(&vdev->vdev_mutex); | |
| if (vop_vdev_inited(vdev)) { | |
| mask = POLLERR; | |
| goto done; | |
| } | |
| poll_wait(f, &vdev->waitq, wait); | |
| if (vop_vdev_inited(vdev)) { | |
| mask = POLLERR; | |
| } else if (vdev->poll_wake) { | |
| vdev->poll_wake = 0; | |
| mask = POLLIN | POLLOUT; | |
| } | |
| done: | |
| mutex_unlock(&vdev->vdev_mutex); | |
| return mask; | |
| } | |
| static inline int | |
| vop_query_offset(struct vop_vdev *vdev, unsigned long offset, | |
| unsigned long *size, unsigned long *pa) | |
| { | |
| struct vop_device *vpdev = vdev->vpdev; | |
| unsigned long start = MIC_DP_SIZE; | |
| int i; | |
| /* | |
| * MMAP interface is as follows: | |
| * offset region | |
| * 0x0 virtio device_page | |
| * 0x1000 first vring | |
| * 0x1000 + size of 1st vring second vring | |
| * .... | |
| */ | |
| if (!offset) { | |
| *pa = virt_to_phys(vpdev->hw_ops->get_dp(vpdev)); | |
| *size = MIC_DP_SIZE; | |
| return 0; | |
| } | |
| for (i = 0; i < vdev->dd->num_vq; i++) { | |
| struct vop_vringh *vvr = &vdev->vvr[i]; | |
| if (offset == start) { | |
| *pa = virt_to_phys(vvr->vring.va); | |
| *size = vvr->vring.len; | |
| return 0; | |
| } | |
| start += vvr->vring.len; | |
| } | |
| return -1; | |
| } | |
| /* | |
| * Maps the device page and virtio rings to user space for readonly access. | |
| */ | |
| static int vop_mmap(struct file *f, struct vm_area_struct *vma) | |
| { | |
| struct vop_vdev *vdev = f->private_data; | |
| unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; | |
| unsigned long pa, size = vma->vm_end - vma->vm_start, size_rem = size; | |
| int i, err; | |
| err = vop_vdev_inited(vdev); | |
| if (err) | |
| goto ret; | |
| if (vma->vm_flags & VM_WRITE) { | |
| err = -EACCES; | |
| goto ret; | |
| } | |
| while (size_rem) { | |
| i = vop_query_offset(vdev, offset, &size, &pa); | |
| if (i < 0) { | |
| err = -EINVAL; | |
| goto ret; | |
| } | |
| err = remap_pfn_range(vma, vma->vm_start + offset, | |
| pa >> PAGE_SHIFT, size, | |
| vma->vm_page_prot); | |
| if (err) | |
| goto ret; | |
| size_rem -= size; | |
| offset += size; | |
| } | |
| ret: | |
| return err; | |
| } | |
| static const struct file_operations vop_fops = { | |
| .open = vop_open, | |
| .release = vop_release, | |
| .unlocked_ioctl = vop_ioctl, | |
| .poll = vop_poll, | |
| .mmap = vop_mmap, | |
| .owner = THIS_MODULE, | |
| }; | |
| int vop_host_init(struct vop_info *vi) | |
| { | |
| int rc; | |
| struct miscdevice *mdev; | |
| struct vop_device *vpdev = vi->vpdev; | |
| INIT_LIST_HEAD(&vi->vdev_list); | |
| vi->dma_ch = vpdev->dma_ch; | |
| mdev = &vi->miscdev; | |
| mdev->minor = MISC_DYNAMIC_MINOR; | |
| snprintf(vi->name, sizeof(vi->name), "vop_virtio%d", vpdev->index); | |
| mdev->name = vi->name; | |
| mdev->fops = &vop_fops; | |
| mdev->parent = &vpdev->dev; | |
| rc = misc_register(mdev); | |
| if (rc) | |
| dev_err(&vpdev->dev, "%s failed rc %d\n", __func__, rc); | |
| return rc; | |
| } | |
| void vop_host_uninit(struct vop_info *vi) | |
| { | |
| struct list_head *pos, *tmp; | |
| struct vop_vdev *vdev; | |
| mutex_lock(&vi->vop_mutex); | |
| vop_virtio_reset_devices(vi); | |
| list_for_each_safe(pos, tmp, &vi->vdev_list) { | |
| vdev = list_entry(pos, struct vop_vdev, list); | |
| list_del(pos); | |
| reinit_completion(&vdev->destroy); | |
| mutex_unlock(&vi->vop_mutex); | |
| mutex_lock(&vdev->vdev_mutex); | |
| vop_virtio_del_device(vdev); | |
| vdev->deleted = true; | |
| mutex_unlock(&vdev->vdev_mutex); | |
| complete(&vdev->destroy); | |
| mutex_lock(&vi->vop_mutex); | |
| } | |
| mutex_unlock(&vi->vop_mutex); | |
| misc_deregister(&vi->miscdev); | |
| } |