| /* | |
| * Copyright (C) 2005 - 2016 Broadcom | |
| * All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License version 2 | |
| * as published by the Free Software Foundation. The full GNU General | |
| * Public License is included in this distribution in the file called COPYING. | |
| * | |
| * Contact Information: | |
| * linux-drivers@emulex.com | |
| * | |
| * Emulex | |
| * 3333 Susan Street | |
| * Costa Mesa, CA 92626 | |
| */ | |
| #include <linux/prefetch.h> | |
| #include <linux/module.h> | |
| #include "be.h" | |
| #include "be_cmds.h" | |
| #include <asm/div64.h> | |
| #include <linux/aer.h> | |
| #include <linux/if_bridge.h> | |
| #include <net/busy_poll.h> | |
| #include <net/vxlan.h> | |
| MODULE_VERSION(DRV_VER); | |
| MODULE_DESCRIPTION(DRV_DESC " " DRV_VER); | |
| MODULE_AUTHOR("Emulex Corporation"); | |
| MODULE_LICENSE("GPL"); | |
| /* num_vfs module param is obsolete. | |
| * Use sysfs method to enable/disable VFs. | |
| */ | |
| static unsigned int num_vfs; | |
| module_param(num_vfs, uint, S_IRUGO); | |
| MODULE_PARM_DESC(num_vfs, "Number of PCI VFs to initialize"); | |
| static ushort rx_frag_size = 2048; | |
| module_param(rx_frag_size, ushort, S_IRUGO); | |
| MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data."); | |
| /* Per-module error detection/recovery workq shared across all functions. | |
| * Each function schedules its own work request on this shared workq. | |
| */ | |
| static struct workqueue_struct *be_err_recovery_workq; | |
| static const struct pci_device_id be_dev_ids[] = { | |
| { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) }, | |
| { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) }, | |
| { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) }, | |
| { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) }, | |
| { PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID3)}, | |
| { PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID4)}, | |
| { PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID5)}, | |
| { PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID6)}, | |
| { 0 } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, be_dev_ids); | |
| /* Workqueue used by all functions for defering cmd calls to the adapter */ | |
| static struct workqueue_struct *be_wq; | |
| /* UE Status Low CSR */ | |
| static const char * const ue_status_low_desc[] = { | |
| "CEV", | |
| "CTX", | |
| "DBUF", | |
| "ERX", | |
| "Host", | |
| "MPU", | |
| "NDMA", | |
| "PTC ", | |
| "RDMA ", | |
| "RXF ", | |
| "RXIPS ", | |
| "RXULP0 ", | |
| "RXULP1 ", | |
| "RXULP2 ", | |
| "TIM ", | |
| "TPOST ", | |
| "TPRE ", | |
| "TXIPS ", | |
| "TXULP0 ", | |
| "TXULP1 ", | |
| "UC ", | |
| "WDMA ", | |
| "TXULP2 ", | |
| "HOST1 ", | |
| "P0_OB_LINK ", | |
| "P1_OB_LINK ", | |
| "HOST_GPIO ", | |
| "MBOX ", | |
| "ERX2 ", | |
| "SPARE ", | |
| "JTAG ", | |
| "MPU_INTPEND " | |
| }; | |
| /* UE Status High CSR */ | |
| static const char * const ue_status_hi_desc[] = { | |
| "LPCMEMHOST", | |
| "MGMT_MAC", | |
| "PCS0ONLINE", | |
| "MPU_IRAM", | |
| "PCS1ONLINE", | |
| "PCTL0", | |
| "PCTL1", | |
| "PMEM", | |
| "RR", | |
| "TXPB", | |
| "RXPP", | |
| "XAUI", | |
| "TXP", | |
| "ARM", | |
| "IPC", | |
| "HOST2", | |
| "HOST3", | |
| "HOST4", | |
| "HOST5", | |
| "HOST6", | |
| "HOST7", | |
| "ECRC", | |
| "Poison TLP", | |
| "NETC", | |
| "PERIPH", | |
| "LLTXULP", | |
| "D2P", | |
| "RCON", | |
| "LDMA", | |
| "LLTXP", | |
| "LLTXPB", | |
| "Unknown" | |
| }; | |
| #define BE_VF_IF_EN_FLAGS (BE_IF_FLAGS_UNTAGGED | \ | |
| BE_IF_FLAGS_BROADCAST | \ | |
| BE_IF_FLAGS_MULTICAST | \ | |
| BE_IF_FLAGS_PASS_L3L4_ERRORS) | |
| static void be_queue_free(struct be_adapter *adapter, struct be_queue_info *q) | |
| { | |
| struct be_dma_mem *mem = &q->dma_mem; | |
| if (mem->va) { | |
| dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va, | |
| mem->dma); | |
| mem->va = NULL; | |
| } | |
| } | |
| static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q, | |
| u16 len, u16 entry_size) | |
| { | |
| struct be_dma_mem *mem = &q->dma_mem; | |
| memset(q, 0, sizeof(*q)); | |
| q->len = len; | |
| q->entry_size = entry_size; | |
| mem->size = len * entry_size; | |
| mem->va = dma_zalloc_coherent(&adapter->pdev->dev, mem->size, &mem->dma, | |
| GFP_KERNEL); | |
| if (!mem->va) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static void be_reg_intr_set(struct be_adapter *adapter, bool enable) | |
| { | |
| u32 reg, enabled; | |
| pci_read_config_dword(adapter->pdev, PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET, | |
| ®); | |
| enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK; | |
| if (!enabled && enable) | |
| reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK; | |
| else if (enabled && !enable) | |
| reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK; | |
| else | |
| return; | |
| pci_write_config_dword(adapter->pdev, | |
| PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET, reg); | |
| } | |
| static void be_intr_set(struct be_adapter *adapter, bool enable) | |
| { | |
| int status = 0; | |
| /* On lancer interrupts can't be controlled via this register */ | |
| if (lancer_chip(adapter)) | |
| return; | |
| if (be_check_error(adapter, BE_ERROR_EEH)) | |
| return; | |
| status = be_cmd_intr_set(adapter, enable); | |
| if (status) | |
| be_reg_intr_set(adapter, enable); | |
| } | |
| static void be_rxq_notify(struct be_adapter *adapter, u16 qid, u16 posted) | |
| { | |
| u32 val = 0; | |
| if (be_check_error(adapter, BE_ERROR_HW)) | |
| return; | |
| val |= qid & DB_RQ_RING_ID_MASK; | |
| val |= posted << DB_RQ_NUM_POSTED_SHIFT; | |
| wmb(); | |
| iowrite32(val, adapter->db + DB_RQ_OFFSET); | |
| } | |
| static void be_txq_notify(struct be_adapter *adapter, struct be_tx_obj *txo, | |
| u16 posted) | |
| { | |
| u32 val = 0; | |
| if (be_check_error(adapter, BE_ERROR_HW)) | |
| return; | |
| val |= txo->q.id & DB_TXULP_RING_ID_MASK; | |
| val |= (posted & DB_TXULP_NUM_POSTED_MASK) << DB_TXULP_NUM_POSTED_SHIFT; | |
| wmb(); | |
| iowrite32(val, adapter->db + txo->db_offset); | |
| } | |
| static void be_eq_notify(struct be_adapter *adapter, u16 qid, | |
| bool arm, bool clear_int, u16 num_popped, | |
| u32 eq_delay_mult_enc) | |
| { | |
| u32 val = 0; | |
| val |= qid & DB_EQ_RING_ID_MASK; | |
| val |= ((qid & DB_EQ_RING_ID_EXT_MASK) << DB_EQ_RING_ID_EXT_MASK_SHIFT); | |
| if (be_check_error(adapter, BE_ERROR_HW)) | |
| return; | |
| if (arm) | |
| val |= 1 << DB_EQ_REARM_SHIFT; | |
| if (clear_int) | |
| val |= 1 << DB_EQ_CLR_SHIFT; | |
| val |= 1 << DB_EQ_EVNT_SHIFT; | |
| val |= num_popped << DB_EQ_NUM_POPPED_SHIFT; | |
| val |= eq_delay_mult_enc << DB_EQ_R2I_DLY_SHIFT; | |
| iowrite32(val, adapter->db + DB_EQ_OFFSET); | |
| } | |
| void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped) | |
| { | |
| u32 val = 0; | |
| val |= qid & DB_CQ_RING_ID_MASK; | |
| val |= ((qid & DB_CQ_RING_ID_EXT_MASK) << | |
| DB_CQ_RING_ID_EXT_MASK_SHIFT); | |
| if (be_check_error(adapter, BE_ERROR_HW)) | |
| return; | |
| if (arm) | |
| val |= 1 << DB_CQ_REARM_SHIFT; | |
| val |= num_popped << DB_CQ_NUM_POPPED_SHIFT; | |
| iowrite32(val, adapter->db + DB_CQ_OFFSET); | |
| } | |
| static int be_dev_mac_add(struct be_adapter *adapter, u8 *mac) | |
| { | |
| int i; | |
| /* Check if mac has already been added as part of uc-list */ | |
| for (i = 0; i < adapter->uc_macs; i++) { | |
| if (ether_addr_equal(adapter->uc_list[i].mac, mac)) { | |
| /* mac already added, skip addition */ | |
| adapter->pmac_id[0] = adapter->pmac_id[i + 1]; | |
| return 0; | |
| } | |
| } | |
| return be_cmd_pmac_add(adapter, mac, adapter->if_handle, | |
| &adapter->pmac_id[0], 0); | |
| } | |
| static void be_dev_mac_del(struct be_adapter *adapter, int pmac_id) | |
| { | |
| int i; | |
| /* Skip deletion if the programmed mac is | |
| * being used in uc-list | |
| */ | |
| for (i = 0; i < adapter->uc_macs; i++) { | |
| if (adapter->pmac_id[i + 1] == pmac_id) | |
| return; | |
| } | |
| be_cmd_pmac_del(adapter, adapter->if_handle, pmac_id, 0); | |
| } | |
| static int be_mac_addr_set(struct net_device *netdev, void *p) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct device *dev = &adapter->pdev->dev; | |
| struct sockaddr *addr = p; | |
| int status; | |
| u8 mac[ETH_ALEN]; | |
| u32 old_pmac_id = adapter->pmac_id[0]; | |
| if (!is_valid_ether_addr(addr->sa_data)) | |
| return -EADDRNOTAVAIL; | |
| /* Proceed further only if, User provided MAC is different | |
| * from active MAC | |
| */ | |
| if (ether_addr_equal(addr->sa_data, adapter->dev_mac)) | |
| return 0; | |
| /* BE3 VFs without FILTMGMT privilege are not allowed to set its MAC | |
| * address | |
| */ | |
| if (BEx_chip(adapter) && be_virtfn(adapter) && | |
| !check_privilege(adapter, BE_PRIV_FILTMGMT)) | |
| return -EPERM; | |
| /* if device is not running, copy MAC to netdev->dev_addr */ | |
| if (!netif_running(netdev)) | |
| goto done; | |
| /* The PMAC_ADD cmd may fail if the VF doesn't have FILTMGMT | |
| * privilege or if PF did not provision the new MAC address. | |
| * On BE3, this cmd will always fail if the VF doesn't have the | |
| * FILTMGMT privilege. This failure is OK, only if the PF programmed | |
| * the MAC for the VF. | |
| */ | |
| mutex_lock(&adapter->rx_filter_lock); | |
| status = be_dev_mac_add(adapter, (u8 *)addr->sa_data); | |
| if (!status) { | |
| /* Delete the old programmed MAC. This call may fail if the | |
| * old MAC was already deleted by the PF driver. | |
| */ | |
| if (adapter->pmac_id[0] != old_pmac_id) | |
| be_dev_mac_del(adapter, old_pmac_id); | |
| } | |
| mutex_unlock(&adapter->rx_filter_lock); | |
| /* Decide if the new MAC is successfully activated only after | |
| * querying the FW | |
| */ | |
| status = be_cmd_get_active_mac(adapter, adapter->pmac_id[0], mac, | |
| adapter->if_handle, true, 0); | |
| if (status) | |
| goto err; | |
| /* The MAC change did not happen, either due to lack of privilege | |
| * or PF didn't pre-provision. | |
| */ | |
| if (!ether_addr_equal(addr->sa_data, mac)) { | |
| status = -EPERM; | |
| goto err; | |
| } | |
| /* Remember currently programmed MAC */ | |
| ether_addr_copy(adapter->dev_mac, addr->sa_data); | |
| done: | |
| ether_addr_copy(netdev->dev_addr, addr->sa_data); | |
| dev_info(dev, "MAC address changed to %pM\n", addr->sa_data); | |
| return 0; | |
| err: | |
| dev_warn(dev, "MAC address change to %pM failed\n", addr->sa_data); | |
| return status; | |
| } | |
| /* BE2 supports only v0 cmd */ | |
| static void *hw_stats_from_cmd(struct be_adapter *adapter) | |
| { | |
| if (BE2_chip(adapter)) { | |
| struct be_cmd_resp_get_stats_v0 *cmd = adapter->stats_cmd.va; | |
| return &cmd->hw_stats; | |
| } else if (BE3_chip(adapter)) { | |
| struct be_cmd_resp_get_stats_v1 *cmd = adapter->stats_cmd.va; | |
| return &cmd->hw_stats; | |
| } else { | |
| struct be_cmd_resp_get_stats_v2 *cmd = adapter->stats_cmd.va; | |
| return &cmd->hw_stats; | |
| } | |
| } | |
| /* BE2 supports only v0 cmd */ | |
| static void *be_erx_stats_from_cmd(struct be_adapter *adapter) | |
| { | |
| if (BE2_chip(adapter)) { | |
| struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter); | |
| return &hw_stats->erx; | |
| } else if (BE3_chip(adapter)) { | |
| struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter); | |
| return &hw_stats->erx; | |
| } else { | |
| struct be_hw_stats_v2 *hw_stats = hw_stats_from_cmd(adapter); | |
| return &hw_stats->erx; | |
| } | |
| } | |
| static void populate_be_v0_stats(struct be_adapter *adapter) | |
| { | |
| struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter); | |
| struct be_pmem_stats *pmem_sts = &hw_stats->pmem; | |
| struct be_rxf_stats_v0 *rxf_stats = &hw_stats->rxf; | |
| struct be_port_rxf_stats_v0 *port_stats = | |
| &rxf_stats->port[adapter->port_num]; | |
| struct be_drv_stats *drvs = &adapter->drv_stats; | |
| be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats)); | |
| drvs->rx_pause_frames = port_stats->rx_pause_frames; | |
| drvs->rx_crc_errors = port_stats->rx_crc_errors; | |
| drvs->rx_control_frames = port_stats->rx_control_frames; | |
| drvs->rx_in_range_errors = port_stats->rx_in_range_errors; | |
| drvs->rx_frame_too_long = port_stats->rx_frame_too_long; | |
| drvs->rx_dropped_runt = port_stats->rx_dropped_runt; | |
| drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs; | |
| drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs; | |
| drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs; | |
| drvs->rxpp_fifo_overflow_drop = port_stats->rx_fifo_overflow; | |
| drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length; | |
| drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small; | |
| drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short; | |
| drvs->rx_out_range_errors = port_stats->rx_out_range_errors; | |
| drvs->rx_input_fifo_overflow_drop = port_stats->rx_input_fifo_overflow; | |
| drvs->rx_dropped_header_too_small = | |
| port_stats->rx_dropped_header_too_small; | |
| drvs->rx_address_filtered = | |
| port_stats->rx_address_filtered + | |
| port_stats->rx_vlan_filtered; | |
| drvs->rx_alignment_symbol_errors = | |
| port_stats->rx_alignment_symbol_errors; | |
| drvs->tx_pauseframes = port_stats->tx_pauseframes; | |
| drvs->tx_controlframes = port_stats->tx_controlframes; | |
| if (adapter->port_num) | |
| drvs->jabber_events = rxf_stats->port1_jabber_events; | |
| else | |
| drvs->jabber_events = rxf_stats->port0_jabber_events; | |
| drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf; | |
| drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr; | |
| drvs->forwarded_packets = rxf_stats->forwarded_packets; | |
| drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu; | |
| drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr; | |
| drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags; | |
| adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops; | |
| } | |
| static void populate_be_v1_stats(struct be_adapter *adapter) | |
| { | |
| struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter); | |
| struct be_pmem_stats *pmem_sts = &hw_stats->pmem; | |
| struct be_rxf_stats_v1 *rxf_stats = &hw_stats->rxf; | |
| struct be_port_rxf_stats_v1 *port_stats = | |
| &rxf_stats->port[adapter->port_num]; | |
| struct be_drv_stats *drvs = &adapter->drv_stats; | |
| be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats)); | |
| drvs->pmem_fifo_overflow_drop = port_stats->pmem_fifo_overflow_drop; | |
| drvs->rx_priority_pause_frames = port_stats->rx_priority_pause_frames; | |
| drvs->rx_pause_frames = port_stats->rx_pause_frames; | |
| drvs->rx_crc_errors = port_stats->rx_crc_errors; | |
| drvs->rx_control_frames = port_stats->rx_control_frames; | |
| drvs->rx_in_range_errors = port_stats->rx_in_range_errors; | |
| drvs->rx_frame_too_long = port_stats->rx_frame_too_long; | |
| drvs->rx_dropped_runt = port_stats->rx_dropped_runt; | |
| drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs; | |
| drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs; | |
| drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs; | |
| drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length; | |
| drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small; | |
| drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short; | |
| drvs->rx_out_range_errors = port_stats->rx_out_range_errors; | |
| drvs->rx_dropped_header_too_small = | |
| port_stats->rx_dropped_header_too_small; | |
| drvs->rx_input_fifo_overflow_drop = | |
| port_stats->rx_input_fifo_overflow_drop; | |
| drvs->rx_address_filtered = port_stats->rx_address_filtered; | |
| drvs->rx_alignment_symbol_errors = | |
| port_stats->rx_alignment_symbol_errors; | |
| drvs->rxpp_fifo_overflow_drop = port_stats->rxpp_fifo_overflow_drop; | |
| drvs->tx_pauseframes = port_stats->tx_pauseframes; | |
| drvs->tx_controlframes = port_stats->tx_controlframes; | |
| drvs->tx_priority_pauseframes = port_stats->tx_priority_pauseframes; | |
| drvs->jabber_events = port_stats->jabber_events; | |
| drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf; | |
| drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr; | |
| drvs->forwarded_packets = rxf_stats->forwarded_packets; | |
| drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu; | |
| drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr; | |
| drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags; | |
| adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops; | |
| } | |
| static void populate_be_v2_stats(struct be_adapter *adapter) | |
| { | |
| struct be_hw_stats_v2 *hw_stats = hw_stats_from_cmd(adapter); | |
| struct be_pmem_stats *pmem_sts = &hw_stats->pmem; | |
| struct be_rxf_stats_v2 *rxf_stats = &hw_stats->rxf; | |
| struct be_port_rxf_stats_v2 *port_stats = | |
| &rxf_stats->port[adapter->port_num]; | |
| struct be_drv_stats *drvs = &adapter->drv_stats; | |
| be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats)); | |
| drvs->pmem_fifo_overflow_drop = port_stats->pmem_fifo_overflow_drop; | |
| drvs->rx_priority_pause_frames = port_stats->rx_priority_pause_frames; | |
| drvs->rx_pause_frames = port_stats->rx_pause_frames; | |
| drvs->rx_crc_errors = port_stats->rx_crc_errors; | |
| drvs->rx_control_frames = port_stats->rx_control_frames; | |
| drvs->rx_in_range_errors = port_stats->rx_in_range_errors; | |
| drvs->rx_frame_too_long = port_stats->rx_frame_too_long; | |
| drvs->rx_dropped_runt = port_stats->rx_dropped_runt; | |
| drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs; | |
| drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs; | |
| drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs; | |
| drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length; | |
| drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small; | |
| drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short; | |
| drvs->rx_out_range_errors = port_stats->rx_out_range_errors; | |
| drvs->rx_dropped_header_too_small = | |
| port_stats->rx_dropped_header_too_small; | |
| drvs->rx_input_fifo_overflow_drop = | |
| port_stats->rx_input_fifo_overflow_drop; | |
| drvs->rx_address_filtered = port_stats->rx_address_filtered; | |
| drvs->rx_alignment_symbol_errors = | |
| port_stats->rx_alignment_symbol_errors; | |
| drvs->rxpp_fifo_overflow_drop = port_stats->rxpp_fifo_overflow_drop; | |
| drvs->tx_pauseframes = port_stats->tx_pauseframes; | |
| drvs->tx_controlframes = port_stats->tx_controlframes; | |
| drvs->tx_priority_pauseframes = port_stats->tx_priority_pauseframes; | |
| drvs->jabber_events = port_stats->jabber_events; | |
| drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf; | |
| drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr; | |
| drvs->forwarded_packets = rxf_stats->forwarded_packets; | |
| drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu; | |
| drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr; | |
| drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags; | |
| adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops; | |
| if (be_roce_supported(adapter)) { | |
| drvs->rx_roce_bytes_lsd = port_stats->roce_bytes_received_lsd; | |
| drvs->rx_roce_bytes_msd = port_stats->roce_bytes_received_msd; | |
| drvs->rx_roce_frames = port_stats->roce_frames_received; | |
| drvs->roce_drops_crc = port_stats->roce_drops_crc; | |
| drvs->roce_drops_payload_len = | |
| port_stats->roce_drops_payload_len; | |
| } | |
| } | |
| static void populate_lancer_stats(struct be_adapter *adapter) | |
| { | |
| struct be_drv_stats *drvs = &adapter->drv_stats; | |
| struct lancer_pport_stats *pport_stats = pport_stats_from_cmd(adapter); | |
| be_dws_le_to_cpu(pport_stats, sizeof(*pport_stats)); | |
| drvs->rx_pause_frames = pport_stats->rx_pause_frames_lo; | |
| drvs->rx_crc_errors = pport_stats->rx_crc_errors_lo; | |
| drvs->rx_control_frames = pport_stats->rx_control_frames_lo; | |
| drvs->rx_in_range_errors = pport_stats->rx_in_range_errors; | |
| drvs->rx_frame_too_long = pport_stats->rx_frames_too_long_lo; | |
| drvs->rx_dropped_runt = pport_stats->rx_dropped_runt; | |
| drvs->rx_ip_checksum_errs = pport_stats->rx_ip_checksum_errors; | |
| drvs->rx_tcp_checksum_errs = pport_stats->rx_tcp_checksum_errors; | |
| drvs->rx_udp_checksum_errs = pport_stats->rx_udp_checksum_errors; | |
| drvs->rx_dropped_tcp_length = | |
| pport_stats->rx_dropped_invalid_tcp_length; | |
| drvs->rx_dropped_too_small = pport_stats->rx_dropped_too_small; | |
| drvs->rx_dropped_too_short = pport_stats->rx_dropped_too_short; | |
| drvs->rx_out_range_errors = pport_stats->rx_out_of_range_errors; | |
| drvs->rx_dropped_header_too_small = | |
| pport_stats->rx_dropped_header_too_small; | |
| drvs->rx_input_fifo_overflow_drop = pport_stats->rx_fifo_overflow; | |
| drvs->rx_address_filtered = | |
| pport_stats->rx_address_filtered + | |
| pport_stats->rx_vlan_filtered; | |
| drvs->rx_alignment_symbol_errors = pport_stats->rx_symbol_errors_lo; | |
| drvs->rxpp_fifo_overflow_drop = pport_stats->rx_fifo_overflow; | |
| drvs->tx_pauseframes = pport_stats->tx_pause_frames_lo; | |
| drvs->tx_controlframes = pport_stats->tx_control_frames_lo; | |
| drvs->jabber_events = pport_stats->rx_jabbers; | |
| drvs->forwarded_packets = pport_stats->num_forwards_lo; | |
| drvs->rx_drops_mtu = pport_stats->rx_drops_mtu_lo; | |
| drvs->rx_drops_too_many_frags = | |
| pport_stats->rx_drops_too_many_frags_lo; | |
| } | |
| static void accumulate_16bit_val(u32 *acc, u16 val) | |
| { | |
| #define lo(x) (x & 0xFFFF) | |
| #define hi(x) (x & 0xFFFF0000) | |
| bool wrapped = val < lo(*acc); | |
| u32 newacc = hi(*acc) + val; | |
| if (wrapped) | |
| newacc += 65536; | |
| WRITE_ONCE(*acc, newacc); | |
| } | |
| static void populate_erx_stats(struct be_adapter *adapter, | |
| struct be_rx_obj *rxo, u32 erx_stat) | |
| { | |
| if (!BEx_chip(adapter)) | |
| rx_stats(rxo)->rx_drops_no_frags = erx_stat; | |
| else | |
| /* below erx HW counter can actually wrap around after | |
| * 65535. Driver accumulates a 32-bit value | |
| */ | |
| accumulate_16bit_val(&rx_stats(rxo)->rx_drops_no_frags, | |
| (u16)erx_stat); | |
| } | |
| void be_parse_stats(struct be_adapter *adapter) | |
| { | |
| struct be_erx_stats_v2 *erx = be_erx_stats_from_cmd(adapter); | |
| struct be_rx_obj *rxo; | |
| int i; | |
| u32 erx_stat; | |
| if (lancer_chip(adapter)) { | |
| populate_lancer_stats(adapter); | |
| } else { | |
| if (BE2_chip(adapter)) | |
| populate_be_v0_stats(adapter); | |
| else if (BE3_chip(adapter)) | |
| /* for BE3 */ | |
| populate_be_v1_stats(adapter); | |
| else | |
| populate_be_v2_stats(adapter); | |
| /* erx_v2 is longer than v0, v1. use v2 for v0, v1 access */ | |
| for_all_rx_queues(adapter, rxo, i) { | |
| erx_stat = erx->rx_drops_no_fragments[rxo->q.id]; | |
| populate_erx_stats(adapter, rxo, erx_stat); | |
| } | |
| } | |
| } | |
| static void be_get_stats64(struct net_device *netdev, | |
| struct rtnl_link_stats64 *stats) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct be_drv_stats *drvs = &adapter->drv_stats; | |
| struct be_rx_obj *rxo; | |
| struct be_tx_obj *txo; | |
| u64 pkts, bytes; | |
| unsigned int start; | |
| int i; | |
| for_all_rx_queues(adapter, rxo, i) { | |
| const struct be_rx_stats *rx_stats = rx_stats(rxo); | |
| do { | |
| start = u64_stats_fetch_begin_irq(&rx_stats->sync); | |
| pkts = rx_stats(rxo)->rx_pkts; | |
| bytes = rx_stats(rxo)->rx_bytes; | |
| } while (u64_stats_fetch_retry_irq(&rx_stats->sync, start)); | |
| stats->rx_packets += pkts; | |
| stats->rx_bytes += bytes; | |
| stats->multicast += rx_stats(rxo)->rx_mcast_pkts; | |
| stats->rx_dropped += rx_stats(rxo)->rx_drops_no_skbs + | |
| rx_stats(rxo)->rx_drops_no_frags; | |
| } | |
| for_all_tx_queues(adapter, txo, i) { | |
| const struct be_tx_stats *tx_stats = tx_stats(txo); | |
| do { | |
| start = u64_stats_fetch_begin_irq(&tx_stats->sync); | |
| pkts = tx_stats(txo)->tx_pkts; | |
| bytes = tx_stats(txo)->tx_bytes; | |
| } while (u64_stats_fetch_retry_irq(&tx_stats->sync, start)); | |
| stats->tx_packets += pkts; | |
| stats->tx_bytes += bytes; | |
| } | |
| /* bad pkts received */ | |
| stats->rx_errors = drvs->rx_crc_errors + | |
| drvs->rx_alignment_symbol_errors + | |
| drvs->rx_in_range_errors + | |
| drvs->rx_out_range_errors + | |
| drvs->rx_frame_too_long + | |
| drvs->rx_dropped_too_small + | |
| drvs->rx_dropped_too_short + | |
| drvs->rx_dropped_header_too_small + | |
| drvs->rx_dropped_tcp_length + | |
| drvs->rx_dropped_runt; | |
| /* detailed rx errors */ | |
| stats->rx_length_errors = drvs->rx_in_range_errors + | |
| drvs->rx_out_range_errors + | |
| drvs->rx_frame_too_long; | |
| stats->rx_crc_errors = drvs->rx_crc_errors; | |
| /* frame alignment errors */ | |
| stats->rx_frame_errors = drvs->rx_alignment_symbol_errors; | |
| /* receiver fifo overrun */ | |
| /* drops_no_pbuf is no per i/f, it's per BE card */ | |
| stats->rx_fifo_errors = drvs->rxpp_fifo_overflow_drop + | |
| drvs->rx_input_fifo_overflow_drop + | |
| drvs->rx_drops_no_pbuf; | |
| } | |
| void be_link_status_update(struct be_adapter *adapter, u8 link_status) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| if (!(adapter->flags & BE_FLAGS_LINK_STATUS_INIT)) { | |
| netif_carrier_off(netdev); | |
| adapter->flags |= BE_FLAGS_LINK_STATUS_INIT; | |
| } | |
| if (link_status) | |
| netif_carrier_on(netdev); | |
| else | |
| netif_carrier_off(netdev); | |
| netdev_info(netdev, "Link is %s\n", link_status ? "Up" : "Down"); | |
| } | |
| static int be_gso_hdr_len(struct sk_buff *skb) | |
| { | |
| if (skb->encapsulation) | |
| return skb_inner_transport_offset(skb) + | |
| inner_tcp_hdrlen(skb); | |
| return skb_transport_offset(skb) + tcp_hdrlen(skb); | |
| } | |
| static void be_tx_stats_update(struct be_tx_obj *txo, struct sk_buff *skb) | |
| { | |
| struct be_tx_stats *stats = tx_stats(txo); | |
| u32 tx_pkts = skb_shinfo(skb)->gso_segs ? : 1; | |
| /* Account for headers which get duplicated in TSO pkt */ | |
| u32 dup_hdr_len = tx_pkts > 1 ? be_gso_hdr_len(skb) * (tx_pkts - 1) : 0; | |
| u64_stats_update_begin(&stats->sync); | |
| stats->tx_reqs++; | |
| stats->tx_bytes += skb->len + dup_hdr_len; | |
| stats->tx_pkts += tx_pkts; | |
| if (skb->encapsulation && skb->ip_summed == CHECKSUM_PARTIAL) | |
| stats->tx_vxlan_offload_pkts += tx_pkts; | |
| u64_stats_update_end(&stats->sync); | |
| } | |
| /* Returns number of WRBs needed for the skb */ | |
| static u32 skb_wrb_cnt(struct sk_buff *skb) | |
| { | |
| /* +1 for the header wrb */ | |
| return 1 + (skb_headlen(skb) ? 1 : 0) + skb_shinfo(skb)->nr_frags; | |
| } | |
| static inline void wrb_fill(struct be_eth_wrb *wrb, u64 addr, int len) | |
| { | |
| wrb->frag_pa_hi = cpu_to_le32(upper_32_bits(addr)); | |
| wrb->frag_pa_lo = cpu_to_le32(lower_32_bits(addr)); | |
| wrb->frag_len = cpu_to_le32(len & ETH_WRB_FRAG_LEN_MASK); | |
| wrb->rsvd0 = 0; | |
| } | |
| /* A dummy wrb is just all zeros. Using a separate routine for dummy-wrb | |
| * to avoid the swap and shift/mask operations in wrb_fill(). | |
| */ | |
| static inline void wrb_fill_dummy(struct be_eth_wrb *wrb) | |
| { | |
| wrb->frag_pa_hi = 0; | |
| wrb->frag_pa_lo = 0; | |
| wrb->frag_len = 0; | |
| wrb->rsvd0 = 0; | |
| } | |
| static inline u16 be_get_tx_vlan_tag(struct be_adapter *adapter, | |
| struct sk_buff *skb) | |
| { | |
| u8 vlan_prio; | |
| u16 vlan_tag; | |
| vlan_tag = skb_vlan_tag_get(skb); | |
| vlan_prio = (vlan_tag & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT; | |
| /* If vlan priority provided by OS is NOT in available bmap */ | |
| if (!(adapter->vlan_prio_bmap & (1 << vlan_prio))) | |
| vlan_tag = (vlan_tag & ~VLAN_PRIO_MASK) | | |
| adapter->recommended_prio_bits; | |
| return vlan_tag; | |
| } | |
| /* Used only for IP tunnel packets */ | |
| static u16 skb_inner_ip_proto(struct sk_buff *skb) | |
| { | |
| return (inner_ip_hdr(skb)->version == 4) ? | |
| inner_ip_hdr(skb)->protocol : inner_ipv6_hdr(skb)->nexthdr; | |
| } | |
| static u16 skb_ip_proto(struct sk_buff *skb) | |
| { | |
| return (ip_hdr(skb)->version == 4) ? | |
| ip_hdr(skb)->protocol : ipv6_hdr(skb)->nexthdr; | |
| } | |
| static inline bool be_is_txq_full(struct be_tx_obj *txo) | |
| { | |
| return atomic_read(&txo->q.used) + BE_MAX_TX_FRAG_COUNT >= txo->q.len; | |
| } | |
| static inline bool be_can_txq_wake(struct be_tx_obj *txo) | |
| { | |
| return atomic_read(&txo->q.used) < txo->q.len / 2; | |
| } | |
| static inline bool be_is_tx_compl_pending(struct be_tx_obj *txo) | |
| { | |
| return atomic_read(&txo->q.used) > txo->pend_wrb_cnt; | |
| } | |
| static void be_get_wrb_params_from_skb(struct be_adapter *adapter, | |
| struct sk_buff *skb, | |
| struct be_wrb_params *wrb_params) | |
| { | |
| u16 proto; | |
| if (skb_is_gso(skb)) { | |
| BE_WRB_F_SET(wrb_params->features, LSO, 1); | |
| wrb_params->lso_mss = skb_shinfo(skb)->gso_size; | |
| if (skb_is_gso_v6(skb) && !lancer_chip(adapter)) | |
| BE_WRB_F_SET(wrb_params->features, LSO6, 1); | |
| } else if (skb->ip_summed == CHECKSUM_PARTIAL) { | |
| if (skb->encapsulation) { | |
| BE_WRB_F_SET(wrb_params->features, IPCS, 1); | |
| proto = skb_inner_ip_proto(skb); | |
| } else { | |
| proto = skb_ip_proto(skb); | |
| } | |
| if (proto == IPPROTO_TCP) | |
| BE_WRB_F_SET(wrb_params->features, TCPCS, 1); | |
| else if (proto == IPPROTO_UDP) | |
| BE_WRB_F_SET(wrb_params->features, UDPCS, 1); | |
| } | |
| if (skb_vlan_tag_present(skb)) { | |
| BE_WRB_F_SET(wrb_params->features, VLAN, 1); | |
| wrb_params->vlan_tag = be_get_tx_vlan_tag(adapter, skb); | |
| } | |
| BE_WRB_F_SET(wrb_params->features, CRC, 1); | |
| } | |
| static void wrb_fill_hdr(struct be_adapter *adapter, | |
| struct be_eth_hdr_wrb *hdr, | |
| struct be_wrb_params *wrb_params, | |
| struct sk_buff *skb) | |
| { | |
| memset(hdr, 0, sizeof(*hdr)); | |
| SET_TX_WRB_HDR_BITS(crc, hdr, | |
| BE_WRB_F_GET(wrb_params->features, CRC)); | |
| SET_TX_WRB_HDR_BITS(ipcs, hdr, | |
| BE_WRB_F_GET(wrb_params->features, IPCS)); | |
| SET_TX_WRB_HDR_BITS(tcpcs, hdr, | |
| BE_WRB_F_GET(wrb_params->features, TCPCS)); | |
| SET_TX_WRB_HDR_BITS(udpcs, hdr, | |
| BE_WRB_F_GET(wrb_params->features, UDPCS)); | |
| SET_TX_WRB_HDR_BITS(lso, hdr, | |
| BE_WRB_F_GET(wrb_params->features, LSO)); | |
| SET_TX_WRB_HDR_BITS(lso6, hdr, | |
| BE_WRB_F_GET(wrb_params->features, LSO6)); | |
| SET_TX_WRB_HDR_BITS(lso_mss, hdr, wrb_params->lso_mss); | |
| /* Hack to skip HW VLAN tagging needs evt = 1, compl = 0. When this | |
| * hack is not needed, the evt bit is set while ringing DB. | |
| */ | |
| SET_TX_WRB_HDR_BITS(event, hdr, | |
| BE_WRB_F_GET(wrb_params->features, VLAN_SKIP_HW)); | |
| SET_TX_WRB_HDR_BITS(vlan, hdr, | |
| BE_WRB_F_GET(wrb_params->features, VLAN)); | |
| SET_TX_WRB_HDR_BITS(vlan_tag, hdr, wrb_params->vlan_tag); | |
| SET_TX_WRB_HDR_BITS(num_wrb, hdr, skb_wrb_cnt(skb)); | |
| SET_TX_WRB_HDR_BITS(len, hdr, skb->len); | |
| SET_TX_WRB_HDR_BITS(mgmt, hdr, | |
| BE_WRB_F_GET(wrb_params->features, OS2BMC)); | |
| } | |
| static void unmap_tx_frag(struct device *dev, struct be_eth_wrb *wrb, | |
| bool unmap_single) | |
| { | |
| dma_addr_t dma; | |
| u32 frag_len = le32_to_cpu(wrb->frag_len); | |
| dma = (u64)le32_to_cpu(wrb->frag_pa_hi) << 32 | | |
| (u64)le32_to_cpu(wrb->frag_pa_lo); | |
| if (frag_len) { | |
| if (unmap_single) | |
| dma_unmap_single(dev, dma, frag_len, DMA_TO_DEVICE); | |
| else | |
| dma_unmap_page(dev, dma, frag_len, DMA_TO_DEVICE); | |
| } | |
| } | |
| /* Grab a WRB header for xmit */ | |
| static u32 be_tx_get_wrb_hdr(struct be_tx_obj *txo) | |
| { | |
| u32 head = txo->q.head; | |
| queue_head_inc(&txo->q); | |
| return head; | |
| } | |
| /* Set up the WRB header for xmit */ | |
| static void be_tx_setup_wrb_hdr(struct be_adapter *adapter, | |
| struct be_tx_obj *txo, | |
| struct be_wrb_params *wrb_params, | |
| struct sk_buff *skb, u16 head) | |
| { | |
| u32 num_frags = skb_wrb_cnt(skb); | |
| struct be_queue_info *txq = &txo->q; | |
| struct be_eth_hdr_wrb *hdr = queue_index_node(txq, head); | |
| wrb_fill_hdr(adapter, hdr, wrb_params, skb); | |
| be_dws_cpu_to_le(hdr, sizeof(*hdr)); | |
| BUG_ON(txo->sent_skb_list[head]); | |
| txo->sent_skb_list[head] = skb; | |
| txo->last_req_hdr = head; | |
| atomic_add(num_frags, &txq->used); | |
| txo->last_req_wrb_cnt = num_frags; | |
| txo->pend_wrb_cnt += num_frags; | |
| } | |
| /* Setup a WRB fragment (buffer descriptor) for xmit */ | |
| static void be_tx_setup_wrb_frag(struct be_tx_obj *txo, dma_addr_t busaddr, | |
| int len) | |
| { | |
| struct be_eth_wrb *wrb; | |
| struct be_queue_info *txq = &txo->q; | |
| wrb = queue_head_node(txq); | |
| wrb_fill(wrb, busaddr, len); | |
| queue_head_inc(txq); | |
| } | |
| /* Bring the queue back to the state it was in before be_xmit_enqueue() routine | |
| * was invoked. The producer index is restored to the previous packet and the | |
| * WRBs of the current packet are unmapped. Invoked to handle tx setup errors. | |
| */ | |
| static void be_xmit_restore(struct be_adapter *adapter, | |
| struct be_tx_obj *txo, u32 head, bool map_single, | |
| u32 copied) | |
| { | |
| struct device *dev; | |
| struct be_eth_wrb *wrb; | |
| struct be_queue_info *txq = &txo->q; | |
| dev = &adapter->pdev->dev; | |
| txq->head = head; | |
| /* skip the first wrb (hdr); it's not mapped */ | |
| queue_head_inc(txq); | |
| while (copied) { | |
| wrb = queue_head_node(txq); | |
| unmap_tx_frag(dev, wrb, map_single); | |
| map_single = false; | |
| copied -= le32_to_cpu(wrb->frag_len); | |
| queue_head_inc(txq); | |
| } | |
| txq->head = head; | |
| } | |
| /* Enqueue the given packet for transmit. This routine allocates WRBs for the | |
| * packet, dma maps the packet buffers and sets up the WRBs. Returns the number | |
| * of WRBs used up by the packet. | |
| */ | |
| static u32 be_xmit_enqueue(struct be_adapter *adapter, struct be_tx_obj *txo, | |
| struct sk_buff *skb, | |
| struct be_wrb_params *wrb_params) | |
| { | |
| u32 i, copied = 0, wrb_cnt = skb_wrb_cnt(skb); | |
| struct device *dev = &adapter->pdev->dev; | |
| struct be_queue_info *txq = &txo->q; | |
| bool map_single = false; | |
| u32 head = txq->head; | |
| dma_addr_t busaddr; | |
| int len; | |
| head = be_tx_get_wrb_hdr(txo); | |
| if (skb->len > skb->data_len) { | |
| len = skb_headlen(skb); | |
| busaddr = dma_map_single(dev, skb->data, len, DMA_TO_DEVICE); | |
| if (dma_mapping_error(dev, busaddr)) | |
| goto dma_err; | |
| map_single = true; | |
| be_tx_setup_wrb_frag(txo, busaddr, len); | |
| copied += len; | |
| } | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
| const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; | |
| len = skb_frag_size(frag); | |
| busaddr = skb_frag_dma_map(dev, frag, 0, len, DMA_TO_DEVICE); | |
| if (dma_mapping_error(dev, busaddr)) | |
| goto dma_err; | |
| be_tx_setup_wrb_frag(txo, busaddr, len); | |
| copied += len; | |
| } | |
| be_tx_setup_wrb_hdr(adapter, txo, wrb_params, skb, head); | |
| be_tx_stats_update(txo, skb); | |
| return wrb_cnt; | |
| dma_err: | |
| adapter->drv_stats.dma_map_errors++; | |
| be_xmit_restore(adapter, txo, head, map_single, copied); | |
| return 0; | |
| } | |
| static inline int qnq_async_evt_rcvd(struct be_adapter *adapter) | |
| { | |
| return adapter->flags & BE_FLAGS_QNQ_ASYNC_EVT_RCVD; | |
| } | |
| static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter, | |
| struct sk_buff *skb, | |
| struct be_wrb_params | |
| *wrb_params) | |
| { | |
| u16 vlan_tag = 0; | |
| skb = skb_share_check(skb, GFP_ATOMIC); | |
| if (unlikely(!skb)) | |
| return skb; | |
| if (skb_vlan_tag_present(skb)) | |
| vlan_tag = be_get_tx_vlan_tag(adapter, skb); | |
| if (qnq_async_evt_rcvd(adapter) && adapter->pvid) { | |
| if (!vlan_tag) | |
| vlan_tag = adapter->pvid; | |
| /* f/w workaround to set skip_hw_vlan = 1, informs the F/W to | |
| * skip VLAN insertion | |
| */ | |
| BE_WRB_F_SET(wrb_params->features, VLAN_SKIP_HW, 1); | |
| } | |
| if (vlan_tag) { | |
| skb = vlan_insert_tag_set_proto(skb, htons(ETH_P_8021Q), | |
| vlan_tag); | |
| if (unlikely(!skb)) | |
| return skb; | |
| skb->vlan_tci = 0; | |
| } | |
| /* Insert the outer VLAN, if any */ | |
| if (adapter->qnq_vid) { | |
| vlan_tag = adapter->qnq_vid; | |
| skb = vlan_insert_tag_set_proto(skb, htons(ETH_P_8021Q), | |
| vlan_tag); | |
| if (unlikely(!skb)) | |
| return skb; | |
| BE_WRB_F_SET(wrb_params->features, VLAN_SKIP_HW, 1); | |
| } | |
| return skb; | |
| } | |
| static bool be_ipv6_exthdr_check(struct sk_buff *skb) | |
| { | |
| struct ethhdr *eh = (struct ethhdr *)skb->data; | |
| u16 offset = ETH_HLEN; | |
| if (eh->h_proto == htons(ETH_P_IPV6)) { | |
| struct ipv6hdr *ip6h = (struct ipv6hdr *)(skb->data + offset); | |
| offset += sizeof(struct ipv6hdr); | |
| if (ip6h->nexthdr != NEXTHDR_TCP && | |
| ip6h->nexthdr != NEXTHDR_UDP) { | |
| struct ipv6_opt_hdr *ehdr = | |
| (struct ipv6_opt_hdr *)(skb->data + offset); | |
| /* offending pkt: 2nd byte following IPv6 hdr is 0xff */ | |
| if (ehdr->hdrlen == 0xff) | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| static int be_vlan_tag_tx_chk(struct be_adapter *adapter, struct sk_buff *skb) | |
| { | |
| return skb_vlan_tag_present(skb) || adapter->pvid || adapter->qnq_vid; | |
| } | |
| static int be_ipv6_tx_stall_chk(struct be_adapter *adapter, struct sk_buff *skb) | |
| { | |
| return BE3_chip(adapter) && be_ipv6_exthdr_check(skb); | |
| } | |
| static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter, | |
| struct sk_buff *skb, | |
| struct be_wrb_params | |
| *wrb_params) | |
| { | |
| struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; | |
| unsigned int eth_hdr_len; | |
| struct iphdr *ip; | |
| /* For padded packets, BE HW modifies tot_len field in IP header | |
| * incorrecly when VLAN tag is inserted by HW. | |
| * For padded packets, Lancer computes incorrect checksum. | |
| */ | |
| eth_hdr_len = ntohs(skb->protocol) == ETH_P_8021Q ? | |
| VLAN_ETH_HLEN : ETH_HLEN; | |
| if (skb->len <= 60 && | |
| (lancer_chip(adapter) || skb_vlan_tag_present(skb)) && | |
| is_ipv4_pkt(skb)) { | |
| ip = (struct iphdr *)ip_hdr(skb); | |
| pskb_trim(skb, eth_hdr_len + ntohs(ip->tot_len)); | |
| } | |
| /* If vlan tag is already inlined in the packet, skip HW VLAN | |
| * tagging in pvid-tagging mode | |
| */ | |
| if (be_pvid_tagging_enabled(adapter) && | |
| veh->h_vlan_proto == htons(ETH_P_8021Q)) | |
| BE_WRB_F_SET(wrb_params->features, VLAN_SKIP_HW, 1); | |
| /* HW has a bug wherein it will calculate CSUM for VLAN | |
| * pkts even though it is disabled. | |
| * Manually insert VLAN in pkt. | |
| */ | |
| if (skb->ip_summed != CHECKSUM_PARTIAL && | |
| skb_vlan_tag_present(skb)) { | |
| skb = be_insert_vlan_in_pkt(adapter, skb, wrb_params); | |
| if (unlikely(!skb)) | |
| goto err; | |
| } | |
| /* HW may lockup when VLAN HW tagging is requested on | |
| * certain ipv6 packets. Drop such pkts if the HW workaround to | |
| * skip HW tagging is not enabled by FW. | |
| */ | |
| if (unlikely(be_ipv6_tx_stall_chk(adapter, skb) && | |
| (adapter->pvid || adapter->qnq_vid) && | |
| !qnq_async_evt_rcvd(adapter))) | |
| goto tx_drop; | |
| /* Manual VLAN tag insertion to prevent: | |
| * ASIC lockup when the ASIC inserts VLAN tag into | |
| * certain ipv6 packets. Insert VLAN tags in driver, | |
| * and set event, completion, vlan bits accordingly | |
| * in the Tx WRB. | |
| */ | |
| if (be_ipv6_tx_stall_chk(adapter, skb) && | |
| be_vlan_tag_tx_chk(adapter, skb)) { | |
| skb = be_insert_vlan_in_pkt(adapter, skb, wrb_params); | |
| if (unlikely(!skb)) | |
| goto err; | |
| } | |
| return skb; | |
| tx_drop: | |
| dev_kfree_skb_any(skb); | |
| err: | |
| return NULL; | |
| } | |
| static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, | |
| struct sk_buff *skb, | |
| struct be_wrb_params *wrb_params) | |
| { | |
| int err; | |
| /* Lancer, SH and BE3 in SRIOV mode have a bug wherein | |
| * packets that are 32b or less may cause a transmit stall | |
| * on that port. The workaround is to pad such packets | |
| * (len <= 32 bytes) to a minimum length of 36b. | |
| */ | |
| if (skb->len <= 32) { | |
| if (skb_put_padto(skb, 36)) | |
| return NULL; | |
| } | |
| if (BEx_chip(adapter) || lancer_chip(adapter)) { | |
| skb = be_lancer_xmit_workarounds(adapter, skb, wrb_params); | |
| if (!skb) | |
| return NULL; | |
| } | |
| /* The stack can send us skbs with length greater than | |
| * what the HW can handle. Trim the extra bytes. | |
| */ | |
| WARN_ON_ONCE(skb->len > BE_MAX_GSO_SIZE); | |
| err = pskb_trim(skb, BE_MAX_GSO_SIZE); | |
| WARN_ON(err); | |
| return skb; | |
| } | |
| static void be_xmit_flush(struct be_adapter *adapter, struct be_tx_obj *txo) | |
| { | |
| struct be_queue_info *txq = &txo->q; | |
| struct be_eth_hdr_wrb *hdr = queue_index_node(txq, txo->last_req_hdr); | |
| /* Mark the last request eventable if it hasn't been marked already */ | |
| if (!(hdr->dw[2] & cpu_to_le32(TX_HDR_WRB_EVT))) | |
| hdr->dw[2] |= cpu_to_le32(TX_HDR_WRB_EVT | TX_HDR_WRB_COMPL); | |
| /* compose a dummy wrb if there are odd set of wrbs to notify */ | |
| if (!lancer_chip(adapter) && (txo->pend_wrb_cnt & 1)) { | |
| wrb_fill_dummy(queue_head_node(txq)); | |
| queue_head_inc(txq); | |
| atomic_inc(&txq->used); | |
| txo->pend_wrb_cnt++; | |
| hdr->dw[2] &= ~cpu_to_le32(TX_HDR_WRB_NUM_MASK << | |
| TX_HDR_WRB_NUM_SHIFT); | |
| hdr->dw[2] |= cpu_to_le32((txo->last_req_wrb_cnt + 1) << | |
| TX_HDR_WRB_NUM_SHIFT); | |
| } | |
| be_txq_notify(adapter, txo, txo->pend_wrb_cnt); | |
| txo->pend_wrb_cnt = 0; | |
| } | |
| /* OS2BMC related */ | |
| #define DHCP_CLIENT_PORT 68 | |
| #define DHCP_SERVER_PORT 67 | |
| #define NET_BIOS_PORT1 137 | |
| #define NET_BIOS_PORT2 138 | |
| #define DHCPV6_RAS_PORT 547 | |
| #define is_mc_allowed_on_bmc(adapter, eh) \ | |
| (!is_multicast_filt_enabled(adapter) && \ | |
| is_multicast_ether_addr(eh->h_dest) && \ | |
| !is_broadcast_ether_addr(eh->h_dest)) | |
| #define is_bc_allowed_on_bmc(adapter, eh) \ | |
| (!is_broadcast_filt_enabled(adapter) && \ | |
| is_broadcast_ether_addr(eh->h_dest)) | |
| #define is_arp_allowed_on_bmc(adapter, skb) \ | |
| (is_arp(skb) && is_arp_filt_enabled(adapter)) | |
| #define is_broadcast_packet(eh, adapter) \ | |
| (is_multicast_ether_addr(eh->h_dest) && \ | |
| !compare_ether_addr(eh->h_dest, adapter->netdev->broadcast)) | |
| #define is_arp(skb) (skb->protocol == htons(ETH_P_ARP)) | |
| #define is_arp_filt_enabled(adapter) \ | |
| (adapter->bmc_filt_mask & (BMC_FILT_BROADCAST_ARP)) | |
| #define is_dhcp_client_filt_enabled(adapter) \ | |
| (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_CLIENT) | |
| #define is_dhcp_srvr_filt_enabled(adapter) \ | |
| (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_SERVER) | |
| #define is_nbios_filt_enabled(adapter) \ | |
| (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_NET_BIOS) | |
| #define is_ipv6_na_filt_enabled(adapter) \ | |
| (adapter->bmc_filt_mask & \ | |
| BMC_FILT_MULTICAST_IPV6_NEIGH_ADVER) | |
| #define is_ipv6_ra_filt_enabled(adapter) \ | |
| (adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RA) | |
| #define is_ipv6_ras_filt_enabled(adapter) \ | |
| (adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RAS) | |
| #define is_broadcast_filt_enabled(adapter) \ | |
| (adapter->bmc_filt_mask & BMC_FILT_BROADCAST) | |
| #define is_multicast_filt_enabled(adapter) \ | |
| (adapter->bmc_filt_mask & BMC_FILT_MULTICAST) | |
| static bool be_send_pkt_to_bmc(struct be_adapter *adapter, | |
| struct sk_buff **skb) | |
| { | |
| struct ethhdr *eh = (struct ethhdr *)(*skb)->data; | |
| bool os2bmc = false; | |
| if (!be_is_os2bmc_enabled(adapter)) | |
| goto done; | |
| if (!is_multicast_ether_addr(eh->h_dest)) | |
| goto done; | |
| if (is_mc_allowed_on_bmc(adapter, eh) || | |
| is_bc_allowed_on_bmc(adapter, eh) || | |
| is_arp_allowed_on_bmc(adapter, (*skb))) { | |
| os2bmc = true; | |
| goto done; | |
| } | |
| if ((*skb)->protocol == htons(ETH_P_IPV6)) { | |
| struct ipv6hdr *hdr = ipv6_hdr((*skb)); | |
| u8 nexthdr = hdr->nexthdr; | |
| if (nexthdr == IPPROTO_ICMPV6) { | |
| struct icmp6hdr *icmp6 = icmp6_hdr((*skb)); | |
| switch (icmp6->icmp6_type) { | |
| case NDISC_ROUTER_ADVERTISEMENT: | |
| os2bmc = is_ipv6_ra_filt_enabled(adapter); | |
| goto done; | |
| case NDISC_NEIGHBOUR_ADVERTISEMENT: | |
| os2bmc = is_ipv6_na_filt_enabled(adapter); | |
| goto done; | |
| default: | |
| break; | |
| } | |
| } | |
| } | |
| if (is_udp_pkt((*skb))) { | |
| struct udphdr *udp = udp_hdr((*skb)); | |
| switch (ntohs(udp->dest)) { | |
| case DHCP_CLIENT_PORT: | |
| os2bmc = is_dhcp_client_filt_enabled(adapter); | |
| goto done; | |
| case DHCP_SERVER_PORT: | |
| os2bmc = is_dhcp_srvr_filt_enabled(adapter); | |
| goto done; | |
| case NET_BIOS_PORT1: | |
| case NET_BIOS_PORT2: | |
| os2bmc = is_nbios_filt_enabled(adapter); | |
| goto done; | |
| case DHCPV6_RAS_PORT: | |
| os2bmc = is_ipv6_ras_filt_enabled(adapter); | |
| goto done; | |
| default: | |
| break; | |
| } | |
| } | |
| done: | |
| /* For packets over a vlan, which are destined | |
| * to BMC, asic expects the vlan to be inline in the packet. | |
| */ | |
| if (os2bmc) | |
| *skb = be_insert_vlan_in_pkt(adapter, *skb, NULL); | |
| return os2bmc; | |
| } | |
| static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| u16 q_idx = skb_get_queue_mapping(skb); | |
| struct be_tx_obj *txo = &adapter->tx_obj[q_idx]; | |
| struct be_wrb_params wrb_params = { 0 }; | |
| bool flush = !skb->xmit_more; | |
| u16 wrb_cnt; | |
| skb = be_xmit_workarounds(adapter, skb, &wrb_params); | |
| if (unlikely(!skb)) | |
| goto drop; | |
| be_get_wrb_params_from_skb(adapter, skb, &wrb_params); | |
| wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params); | |
| if (unlikely(!wrb_cnt)) { | |
| dev_kfree_skb_any(skb); | |
| goto drop; | |
| } | |
| /* if os2bmc is enabled and if the pkt is destined to bmc, | |
| * enqueue the pkt a 2nd time with mgmt bit set. | |
| */ | |
| if (be_send_pkt_to_bmc(adapter, &skb)) { | |
| BE_WRB_F_SET(wrb_params.features, OS2BMC, 1); | |
| wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params); | |
| if (unlikely(!wrb_cnt)) | |
| goto drop; | |
| else | |
| skb_get(skb); | |
| } | |
| if (be_is_txq_full(txo)) { | |
| netif_stop_subqueue(netdev, q_idx); | |
| tx_stats(txo)->tx_stops++; | |
| } | |
| if (flush || __netif_subqueue_stopped(netdev, q_idx)) | |
| be_xmit_flush(adapter, txo); | |
| return NETDEV_TX_OK; | |
| drop: | |
| tx_stats(txo)->tx_drv_drops++; | |
| /* Flush the already enqueued tx requests */ | |
| if (flush && txo->pend_wrb_cnt) | |
| be_xmit_flush(adapter, txo); | |
| return NETDEV_TX_OK; | |
| } | |
| static inline bool be_in_all_promisc(struct be_adapter *adapter) | |
| { | |
| return (adapter->if_flags & BE_IF_FLAGS_ALL_PROMISCUOUS) == | |
| BE_IF_FLAGS_ALL_PROMISCUOUS; | |
| } | |
| static int be_set_vlan_promisc(struct be_adapter *adapter) | |
| { | |
| struct device *dev = &adapter->pdev->dev; | |
| int status; | |
| if (adapter->if_flags & BE_IF_FLAGS_VLAN_PROMISCUOUS) | |
| return 0; | |
| status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_VLAN_PROMISCUOUS, ON); | |
| if (!status) { | |
| dev_info(dev, "Enabled VLAN promiscuous mode\n"); | |
| adapter->if_flags |= BE_IF_FLAGS_VLAN_PROMISCUOUS; | |
| } else { | |
| dev_err(dev, "Failed to enable VLAN promiscuous mode\n"); | |
| } | |
| return status; | |
| } | |
| static int be_clear_vlan_promisc(struct be_adapter *adapter) | |
| { | |
| struct device *dev = &adapter->pdev->dev; | |
| int status; | |
| status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_VLAN_PROMISCUOUS, OFF); | |
| if (!status) { | |
| dev_info(dev, "Disabling VLAN promiscuous mode\n"); | |
| adapter->if_flags &= ~BE_IF_FLAGS_VLAN_PROMISCUOUS; | |
| } | |
| return status; | |
| } | |
| /* | |
| * A max of 64 (BE_NUM_VLANS_SUPPORTED) vlans can be configured in BE. | |
| * If the user configures more, place BE in vlan promiscuous mode. | |
| */ | |
| static int be_vid_config(struct be_adapter *adapter) | |
| { | |
| struct device *dev = &adapter->pdev->dev; | |
| u16 vids[BE_NUM_VLANS_SUPPORTED]; | |
| u16 num = 0, i = 0; | |
| int status = 0; | |
| /* No need to change the VLAN state if the I/F is in promiscuous */ | |
| if (adapter->netdev->flags & IFF_PROMISC) | |
| return 0; | |
| if (adapter->vlans_added > be_max_vlans(adapter)) | |
| return be_set_vlan_promisc(adapter); | |
| if (adapter->if_flags & BE_IF_FLAGS_VLAN_PROMISCUOUS) { | |
| status = be_clear_vlan_promisc(adapter); | |
| if (status) | |
| return status; | |
| } | |
| /* Construct VLAN Table to give to HW */ | |
| for_each_set_bit(i, adapter->vids, VLAN_N_VID) | |
| vids[num++] = cpu_to_le16(i); | |
| status = be_cmd_vlan_config(adapter, adapter->if_handle, vids, num, 0); | |
| if (status) { | |
| dev_err(dev, "Setting HW VLAN filtering failed\n"); | |
| /* Set to VLAN promisc mode as setting VLAN filter failed */ | |
| if (addl_status(status) == MCC_ADDL_STATUS_INSUFFICIENT_VLANS || | |
| addl_status(status) == | |
| MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES) | |
| return be_set_vlan_promisc(adapter); | |
| } | |
| return status; | |
| } | |
| static int be_vlan_add_vid(struct net_device *netdev, __be16 proto, u16 vid) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| int status = 0; | |
| mutex_lock(&adapter->rx_filter_lock); | |
| /* Packets with VID 0 are always received by Lancer by default */ | |
| if (lancer_chip(adapter) && vid == 0) | |
| goto done; | |
| if (test_bit(vid, adapter->vids)) | |
| goto done; | |
| set_bit(vid, adapter->vids); | |
| adapter->vlans_added++; | |
| status = be_vid_config(adapter); | |
| done: | |
| mutex_unlock(&adapter->rx_filter_lock); | |
| return status; | |
| } | |
| static int be_vlan_rem_vid(struct net_device *netdev, __be16 proto, u16 vid) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| int status = 0; | |
| mutex_lock(&adapter->rx_filter_lock); | |
| /* Packets with VID 0 are always received by Lancer by default */ | |
| if (lancer_chip(adapter) && vid == 0) | |
| goto done; | |
| if (!test_bit(vid, adapter->vids)) | |
| goto done; | |
| clear_bit(vid, adapter->vids); | |
| adapter->vlans_added--; | |
| status = be_vid_config(adapter); | |
| done: | |
| mutex_unlock(&adapter->rx_filter_lock); | |
| return status; | |
| } | |
| static void be_set_all_promisc(struct be_adapter *adapter) | |
| { | |
| be_cmd_rx_filter(adapter, BE_IF_FLAGS_ALL_PROMISCUOUS, ON); | |
| adapter->if_flags |= BE_IF_FLAGS_ALL_PROMISCUOUS; | |
| } | |
| static void be_set_mc_promisc(struct be_adapter *adapter) | |
| { | |
| int status; | |
| if (adapter->if_flags & BE_IF_FLAGS_MCAST_PROMISCUOUS) | |
| return; | |
| status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_MCAST_PROMISCUOUS, ON); | |
| if (!status) | |
| adapter->if_flags |= BE_IF_FLAGS_MCAST_PROMISCUOUS; | |
| } | |
| static void be_set_uc_promisc(struct be_adapter *adapter) | |
| { | |
| int status; | |
| if (adapter->if_flags & BE_IF_FLAGS_PROMISCUOUS) | |
| return; | |
| status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_PROMISCUOUS, ON); | |
| if (!status) | |
| adapter->if_flags |= BE_IF_FLAGS_PROMISCUOUS; | |
| } | |
| static void be_clear_uc_promisc(struct be_adapter *adapter) | |
| { | |
| int status; | |
| if (!(adapter->if_flags & BE_IF_FLAGS_PROMISCUOUS)) | |
| return; | |
| status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_PROMISCUOUS, OFF); | |
| if (!status) | |
| adapter->if_flags &= ~BE_IF_FLAGS_PROMISCUOUS; | |
| } | |
| /* The below 2 functions are the callback args for __dev_mc_sync/dev_uc_sync(). | |
| * We use a single callback function for both sync and unsync. We really don't | |
| * add/remove addresses through this callback. But, we use it to detect changes | |
| * to the uc/mc lists. The entire uc/mc list is programmed in be_set_rx_mode(). | |
| */ | |
| static int be_uc_list_update(struct net_device *netdev, | |
| const unsigned char *addr) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| adapter->update_uc_list = true; | |
| return 0; | |
| } | |
| static int be_mc_list_update(struct net_device *netdev, | |
| const unsigned char *addr) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| adapter->update_mc_list = true; | |
| return 0; | |
| } | |
| static void be_set_mc_list(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct netdev_hw_addr *ha; | |
| bool mc_promisc = false; | |
| int status; | |
| netif_addr_lock_bh(netdev); | |
| __dev_mc_sync(netdev, be_mc_list_update, be_mc_list_update); | |
| if (netdev->flags & IFF_PROMISC) { | |
| adapter->update_mc_list = false; | |
| } else if (netdev->flags & IFF_ALLMULTI || | |
| netdev_mc_count(netdev) > be_max_mc(adapter)) { | |
| /* Enable multicast promisc if num configured exceeds | |
| * what we support | |
| */ | |
| mc_promisc = true; | |
| adapter->update_mc_list = false; | |
| } else if (adapter->if_flags & BE_IF_FLAGS_MCAST_PROMISCUOUS) { | |
| /* Update mc-list unconditionally if the iface was previously | |
| * in mc-promisc mode and now is out of that mode. | |
| */ | |
| adapter->update_mc_list = true; | |
| } | |
| if (adapter->update_mc_list) { | |
| int i = 0; | |
| /* cache the mc-list in adapter */ | |
| netdev_for_each_mc_addr(ha, netdev) { | |
| ether_addr_copy(adapter->mc_list[i].mac, ha->addr); | |
| i++; | |
| } | |
| adapter->mc_count = netdev_mc_count(netdev); | |
| } | |
| netif_addr_unlock_bh(netdev); | |
| if (mc_promisc) { | |
| be_set_mc_promisc(adapter); | |
| } else if (adapter->update_mc_list) { | |
| status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_MULTICAST, ON); | |
| if (!status) | |
| adapter->if_flags &= ~BE_IF_FLAGS_MCAST_PROMISCUOUS; | |
| else | |
| be_set_mc_promisc(adapter); | |
| adapter->update_mc_list = false; | |
| } | |
| } | |
| static void be_clear_mc_list(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| __dev_mc_unsync(netdev, NULL); | |
| be_cmd_rx_filter(adapter, BE_IF_FLAGS_MULTICAST, OFF); | |
| adapter->mc_count = 0; | |
| } | |
| static int be_uc_mac_add(struct be_adapter *adapter, int uc_idx) | |
| { | |
| if (ether_addr_equal(adapter->uc_list[uc_idx].mac, adapter->dev_mac)) { | |
| adapter->pmac_id[uc_idx + 1] = adapter->pmac_id[0]; | |
| return 0; | |
| } | |
| return be_cmd_pmac_add(adapter, adapter->uc_list[uc_idx].mac, | |
| adapter->if_handle, | |
| &adapter->pmac_id[uc_idx + 1], 0); | |
| } | |
| static void be_uc_mac_del(struct be_adapter *adapter, int pmac_id) | |
| { | |
| if (pmac_id == adapter->pmac_id[0]) | |
| return; | |
| be_cmd_pmac_del(adapter, adapter->if_handle, pmac_id, 0); | |
| } | |
| static void be_set_uc_list(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct netdev_hw_addr *ha; | |
| bool uc_promisc = false; | |
| int curr_uc_macs = 0, i; | |
| netif_addr_lock_bh(netdev); | |
| __dev_uc_sync(netdev, be_uc_list_update, be_uc_list_update); | |
| if (netdev->flags & IFF_PROMISC) { | |
| adapter->update_uc_list = false; | |
| } else if (netdev_uc_count(netdev) > (be_max_uc(adapter) - 1)) { | |
| uc_promisc = true; | |
| adapter->update_uc_list = false; | |
| } else if (adapter->if_flags & BE_IF_FLAGS_PROMISCUOUS) { | |
| /* Update uc-list unconditionally if the iface was previously | |
| * in uc-promisc mode and now is out of that mode. | |
| */ | |
| adapter->update_uc_list = true; | |
| } | |
| if (adapter->update_uc_list) { | |
| /* cache the uc-list in adapter array */ | |
| i = 0; | |
| netdev_for_each_uc_addr(ha, netdev) { | |
| ether_addr_copy(adapter->uc_list[i].mac, ha->addr); | |
| i++; | |
| } | |
| curr_uc_macs = netdev_uc_count(netdev); | |
| } | |
| netif_addr_unlock_bh(netdev); | |
| if (uc_promisc) { | |
| be_set_uc_promisc(adapter); | |
| } else if (adapter->update_uc_list) { | |
| be_clear_uc_promisc(adapter); | |
| for (i = 0; i < adapter->uc_macs; i++) | |
| be_uc_mac_del(adapter, adapter->pmac_id[i + 1]); | |
| for (i = 0; i < curr_uc_macs; i++) | |
| be_uc_mac_add(adapter, i); | |
| adapter->uc_macs = curr_uc_macs; | |
| adapter->update_uc_list = false; | |
| } | |
| } | |
| static void be_clear_uc_list(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| int i; | |
| __dev_uc_unsync(netdev, NULL); | |
| for (i = 0; i < adapter->uc_macs; i++) | |
| be_uc_mac_del(adapter, adapter->pmac_id[i + 1]); | |
| adapter->uc_macs = 0; | |
| } | |
| static void __be_set_rx_mode(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| mutex_lock(&adapter->rx_filter_lock); | |
| if (netdev->flags & IFF_PROMISC) { | |
| if (!be_in_all_promisc(adapter)) | |
| be_set_all_promisc(adapter); | |
| } else if (be_in_all_promisc(adapter)) { | |
| /* We need to re-program the vlan-list or clear | |
| * vlan-promisc mode (if needed) when the interface | |
| * comes out of promisc mode. | |
| */ | |
| be_vid_config(adapter); | |
| } | |
| be_set_uc_list(adapter); | |
| be_set_mc_list(adapter); | |
| mutex_unlock(&adapter->rx_filter_lock); | |
| } | |
| static void be_work_set_rx_mode(struct work_struct *work) | |
| { | |
| struct be_cmd_work *cmd_work = | |
| container_of(work, struct be_cmd_work, work); | |
| __be_set_rx_mode(cmd_work->adapter); | |
| kfree(cmd_work); | |
| } | |
| static int be_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | |
| int status; | |
| if (!sriov_enabled(adapter)) | |
| return -EPERM; | |
| if (!is_valid_ether_addr(mac) || vf >= adapter->num_vfs) | |
| return -EINVAL; | |
| /* Proceed further only if user provided MAC is different | |
| * from active MAC | |
| */ | |
| if (ether_addr_equal(mac, vf_cfg->mac_addr)) | |
| return 0; | |
| if (BEx_chip(adapter)) { | |
| be_cmd_pmac_del(adapter, vf_cfg->if_handle, vf_cfg->pmac_id, | |
| vf + 1); | |
| status = be_cmd_pmac_add(adapter, mac, vf_cfg->if_handle, | |
| &vf_cfg->pmac_id, vf + 1); | |
| } else { | |
| status = be_cmd_set_mac(adapter, mac, vf_cfg->if_handle, | |
| vf + 1); | |
| } | |
| if (status) { | |
| dev_err(&adapter->pdev->dev, "MAC %pM set on VF %d Failed: %#x", | |
| mac, vf, status); | |
| return be_cmd_status(status); | |
| } | |
| ether_addr_copy(vf_cfg->mac_addr, mac); | |
| return 0; | |
| } | |
| static int be_get_vf_config(struct net_device *netdev, int vf, | |
| struct ifla_vf_info *vi) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | |
| if (!sriov_enabled(adapter)) | |
| return -EPERM; | |
| if (vf >= adapter->num_vfs) | |
| return -EINVAL; | |
| vi->vf = vf; | |
| vi->max_tx_rate = vf_cfg->tx_rate; | |
| vi->min_tx_rate = 0; | |
| vi->vlan = vf_cfg->vlan_tag & VLAN_VID_MASK; | |
| vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT; | |
| memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN); | |
| vi->linkstate = adapter->vf_cfg[vf].plink_tracking; | |
| vi->spoofchk = adapter->vf_cfg[vf].spoofchk; | |
| return 0; | |
| } | |
| static int be_set_vf_tvt(struct be_adapter *adapter, int vf, u16 vlan) | |
| { | |
| struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | |
| u16 vids[BE_NUM_VLANS_SUPPORTED]; | |
| int vf_if_id = vf_cfg->if_handle; | |
| int status; | |
| /* Enable Transparent VLAN Tagging */ | |
| status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, vf_if_id, 0, 0); | |
| if (status) | |
| return status; | |
| /* Clear pre-programmed VLAN filters on VF if any, if TVT is enabled */ | |
| vids[0] = 0; | |
| status = be_cmd_vlan_config(adapter, vf_if_id, vids, 1, vf + 1); | |
| if (!status) | |
| dev_info(&adapter->pdev->dev, | |
| "Cleared guest VLANs on VF%d", vf); | |
| /* After TVT is enabled, disallow VFs to program VLAN filters */ | |
| if (vf_cfg->privileges & BE_PRIV_FILTMGMT) { | |
| status = be_cmd_set_fn_privileges(adapter, vf_cfg->privileges & | |
| ~BE_PRIV_FILTMGMT, vf + 1); | |
| if (!status) | |
| vf_cfg->privileges &= ~BE_PRIV_FILTMGMT; | |
| } | |
| return 0; | |
| } | |
| static int be_clear_vf_tvt(struct be_adapter *adapter, int vf) | |
| { | |
| struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | |
| struct device *dev = &adapter->pdev->dev; | |
| int status; | |
| /* Reset Transparent VLAN Tagging. */ | |
| status = be_cmd_set_hsw_config(adapter, BE_RESET_VLAN_TAG_ID, vf + 1, | |
| vf_cfg->if_handle, 0, 0); | |
| if (status) | |
| return status; | |
| /* Allow VFs to program VLAN filtering */ | |
| if (!(vf_cfg->privileges & BE_PRIV_FILTMGMT)) { | |
| status = be_cmd_set_fn_privileges(adapter, vf_cfg->privileges | | |
| BE_PRIV_FILTMGMT, vf + 1); | |
| if (!status) { | |
| vf_cfg->privileges |= BE_PRIV_FILTMGMT; | |
| dev_info(dev, "VF%d: FILTMGMT priv enabled", vf); | |
| } | |
| } | |
| dev_info(dev, | |
| "Disable/re-enable i/f in VM to clear Transparent VLAN tag"); | |
| return 0; | |
| } | |
| static int be_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos, | |
| __be16 vlan_proto) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | |
| int status; | |
| if (!sriov_enabled(adapter)) | |
| return -EPERM; | |
| if (vf >= adapter->num_vfs || vlan > 4095 || qos > 7) | |
| return -EINVAL; | |
| if (vlan_proto != htons(ETH_P_8021Q)) | |
| return -EPROTONOSUPPORT; | |
| if (vlan || qos) { | |
| vlan |= qos << VLAN_PRIO_SHIFT; | |
| status = be_set_vf_tvt(adapter, vf, vlan); | |
| } else { | |
| status = be_clear_vf_tvt(adapter, vf); | |
| } | |
| if (status) { | |
| dev_err(&adapter->pdev->dev, | |
| "VLAN %d config on VF %d failed : %#x\n", vlan, vf, | |
| status); | |
| return be_cmd_status(status); | |
| } | |
| vf_cfg->vlan_tag = vlan; | |
| return 0; | |
| } | |
| static int be_set_vf_tx_rate(struct net_device *netdev, int vf, | |
| int min_tx_rate, int max_tx_rate) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct device *dev = &adapter->pdev->dev; | |
| int percent_rate, status = 0; | |
| u16 link_speed = 0; | |
| u8 link_status; | |
| if (!sriov_enabled(adapter)) | |
| return -EPERM; | |
| if (vf >= adapter->num_vfs) | |
| return -EINVAL; | |
| if (min_tx_rate) | |
| return -EINVAL; | |
| if (!max_tx_rate) | |
| goto config_qos; | |
| status = be_cmd_link_status_query(adapter, &link_speed, | |
| &link_status, 0); | |
| if (status) | |
| goto err; | |
| if (!link_status) { | |
| dev_err(dev, "TX-rate setting not allowed when link is down\n"); | |
| status = -ENETDOWN; | |
| goto err; | |
| } | |
| if (max_tx_rate < 100 || max_tx_rate > link_speed) { | |
| dev_err(dev, "TX-rate must be between 100 and %d Mbps\n", | |
| link_speed); | |
| status = -EINVAL; | |
| goto err; | |
| } | |
| /* On Skyhawk the QOS setting must be done only as a % value */ | |
| percent_rate = link_speed / 100; | |
| if (skyhawk_chip(adapter) && (max_tx_rate % percent_rate)) { | |
| dev_err(dev, "TX-rate must be a multiple of %d Mbps\n", | |
| percent_rate); | |
| status = -EINVAL; | |
| goto err; | |
| } | |
| config_qos: | |
| status = be_cmd_config_qos(adapter, max_tx_rate, link_speed, vf + 1); | |
| if (status) | |
| goto err; | |
| adapter->vf_cfg[vf].tx_rate = max_tx_rate; | |
| return 0; | |
| err: | |
| dev_err(dev, "TX-rate setting of %dMbps on VF%d failed\n", | |
| max_tx_rate, vf); | |
| return be_cmd_status(status); | |
| } | |
| static int be_set_vf_link_state(struct net_device *netdev, int vf, | |
| int link_state) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| int status; | |
| if (!sriov_enabled(adapter)) | |
| return -EPERM; | |
| if (vf >= adapter->num_vfs) | |
| return -EINVAL; | |
| status = be_cmd_set_logical_link_config(adapter, link_state, vf+1); | |
| if (status) { | |
| dev_err(&adapter->pdev->dev, | |
| "Link state change on VF %d failed: %#x\n", vf, status); | |
| return be_cmd_status(status); | |
| } | |
| adapter->vf_cfg[vf].plink_tracking = link_state; | |
| return 0; | |
| } | |
| static int be_set_vf_spoofchk(struct net_device *netdev, int vf, bool enable) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | |
| u8 spoofchk; | |
| int status; | |
| if (!sriov_enabled(adapter)) | |
| return -EPERM; | |
| if (vf >= adapter->num_vfs) | |
| return -EINVAL; | |
| if (BEx_chip(adapter)) | |
| return -EOPNOTSUPP; | |
| if (enable == vf_cfg->spoofchk) | |
| return 0; | |
| spoofchk = enable ? ENABLE_MAC_SPOOFCHK : DISABLE_MAC_SPOOFCHK; | |
| status = be_cmd_set_hsw_config(adapter, 0, vf + 1, vf_cfg->if_handle, | |
| 0, spoofchk); | |
| if (status) { | |
| dev_err(&adapter->pdev->dev, | |
| "Spoofchk change on VF %d failed: %#x\n", vf, status); | |
| return be_cmd_status(status); | |
| } | |
| vf_cfg->spoofchk = enable; | |
| return 0; | |
| } | |
| static void be_aic_update(struct be_aic_obj *aic, u64 rx_pkts, u64 tx_pkts, | |
| ulong now) | |
| { | |
| aic->rx_pkts_prev = rx_pkts; | |
| aic->tx_reqs_prev = tx_pkts; | |
| aic->jiffies = now; | |
| } | |
| static int be_get_new_eqd(struct be_eq_obj *eqo) | |
| { | |
| struct be_adapter *adapter = eqo->adapter; | |
| int eqd, start; | |
| struct be_aic_obj *aic; | |
| struct be_rx_obj *rxo; | |
| struct be_tx_obj *txo; | |
| u64 rx_pkts = 0, tx_pkts = 0; | |
| ulong now; | |
| u32 pps, delta; | |
| int i; | |
| aic = &adapter->aic_obj[eqo->idx]; | |
| if (!aic->enable) { | |
| if (aic->jiffies) | |
| aic->jiffies = 0; | |
| eqd = aic->et_eqd; | |
| return eqd; | |
| } | |
| for_all_rx_queues_on_eq(adapter, eqo, rxo, i) { | |
| do { | |
| start = u64_stats_fetch_begin_irq(&rxo->stats.sync); | |
| rx_pkts += rxo->stats.rx_pkts; | |
| } while (u64_stats_fetch_retry_irq(&rxo->stats.sync, start)); | |
| } | |
| for_all_tx_queues_on_eq(adapter, eqo, txo, i) { | |
| do { | |
| start = u64_stats_fetch_begin_irq(&txo->stats.sync); | |
| tx_pkts += txo->stats.tx_reqs; | |
| } while (u64_stats_fetch_retry_irq(&txo->stats.sync, start)); | |
| } | |
| /* Skip, if wrapped around or first calculation */ | |
| now = jiffies; | |
| if (!aic->jiffies || time_before(now, aic->jiffies) || | |
| rx_pkts < aic->rx_pkts_prev || | |
| tx_pkts < aic->tx_reqs_prev) { | |
| be_aic_update(aic, rx_pkts, tx_pkts, now); | |
| return aic->prev_eqd; | |
| } | |
| delta = jiffies_to_msecs(now - aic->jiffies); | |
| if (delta == 0) | |
| return aic->prev_eqd; | |
| pps = (((u32)(rx_pkts - aic->rx_pkts_prev) * 1000) / delta) + | |
| (((u32)(tx_pkts - aic->tx_reqs_prev) * 1000) / delta); | |
| eqd = (pps / 15000) << 2; | |
| if (eqd < 8) | |
| eqd = 0; | |
| eqd = min_t(u32, eqd, aic->max_eqd); | |
| eqd = max_t(u32, eqd, aic->min_eqd); | |
| be_aic_update(aic, rx_pkts, tx_pkts, now); | |
| return eqd; | |
| } | |
| /* For Skyhawk-R only */ | |
| static u32 be_get_eq_delay_mult_enc(struct be_eq_obj *eqo) | |
| { | |
| struct be_adapter *adapter = eqo->adapter; | |
| struct be_aic_obj *aic = &adapter->aic_obj[eqo->idx]; | |
| ulong now = jiffies; | |
| int eqd; | |
| u32 mult_enc; | |
| if (!aic->enable) | |
| return 0; | |
| if (jiffies_to_msecs(now - aic->jiffies) < 1) | |
| eqd = aic->prev_eqd; | |
| else | |
| eqd = be_get_new_eqd(eqo); | |
| if (eqd > 100) | |
| mult_enc = R2I_DLY_ENC_1; | |
| else if (eqd > 60) | |
| mult_enc = R2I_DLY_ENC_2; | |
| else if (eqd > 20) | |
| mult_enc = R2I_DLY_ENC_3; | |
| else | |
| mult_enc = R2I_DLY_ENC_0; | |
| aic->prev_eqd = eqd; | |
| return mult_enc; | |
| } | |
| void be_eqd_update(struct be_adapter *adapter, bool force_update) | |
| { | |
| struct be_set_eqd set_eqd[MAX_EVT_QS]; | |
| struct be_aic_obj *aic; | |
| struct be_eq_obj *eqo; | |
| int i, num = 0, eqd; | |
| for_all_evt_queues(adapter, eqo, i) { | |
| aic = &adapter->aic_obj[eqo->idx]; | |
| eqd = be_get_new_eqd(eqo); | |
| if (force_update || eqd != aic->prev_eqd) { | |
| set_eqd[num].delay_multiplier = (eqd * 65)/100; | |
| set_eqd[num].eq_id = eqo->q.id; | |
| aic->prev_eqd = eqd; | |
| num++; | |
| } | |
| } | |
| if (num) | |
| be_cmd_modify_eqd(adapter, set_eqd, num); | |
| } | |
| static void be_rx_stats_update(struct be_rx_obj *rxo, | |
| struct be_rx_compl_info *rxcp) | |
| { | |
| struct be_rx_stats *stats = rx_stats(rxo); | |
| u64_stats_update_begin(&stats->sync); | |
| stats->rx_compl++; | |
| stats->rx_bytes += rxcp->pkt_size; | |
| stats->rx_pkts++; | |
| if (rxcp->tunneled) | |
| stats->rx_vxlan_offload_pkts++; | |
| if (rxcp->pkt_type == BE_MULTICAST_PACKET) | |
| stats->rx_mcast_pkts++; | |
| if (rxcp->err) | |
| stats->rx_compl_err++; | |
| u64_stats_update_end(&stats->sync); | |
| } | |
| static inline bool csum_passed(struct be_rx_compl_info *rxcp) | |
| { | |
| /* L4 checksum is not reliable for non TCP/UDP packets. | |
| * Also ignore ipcksm for ipv6 pkts | |
| */ | |
| return (rxcp->tcpf || rxcp->udpf) && rxcp->l4_csum && | |
| (rxcp->ip_csum || rxcp->ipv6) && !rxcp->err; | |
| } | |
| static struct be_rx_page_info *get_rx_page_info(struct be_rx_obj *rxo) | |
| { | |
| struct be_adapter *adapter = rxo->adapter; | |
| struct be_rx_page_info *rx_page_info; | |
| struct be_queue_info *rxq = &rxo->q; | |
| u32 frag_idx = rxq->tail; | |
| rx_page_info = &rxo->page_info_tbl[frag_idx]; | |
| BUG_ON(!rx_page_info->page); | |
| if (rx_page_info->last_frag) { | |
| dma_unmap_page(&adapter->pdev->dev, | |
| dma_unmap_addr(rx_page_info, bus), | |
| adapter->big_page_size, DMA_FROM_DEVICE); | |
| rx_page_info->last_frag = false; | |
| } else { | |
| dma_sync_single_for_cpu(&adapter->pdev->dev, | |
| dma_unmap_addr(rx_page_info, bus), | |
| rx_frag_size, DMA_FROM_DEVICE); | |
| } | |
| queue_tail_inc(rxq); | |
| atomic_dec(&rxq->used); | |
| return rx_page_info; | |
| } | |
| /* Throwaway the data in the Rx completion */ | |
| static void be_rx_compl_discard(struct be_rx_obj *rxo, | |
| struct be_rx_compl_info *rxcp) | |
| { | |
| struct be_rx_page_info *page_info; | |
| u16 i, num_rcvd = rxcp->num_rcvd; | |
| for (i = 0; i < num_rcvd; i++) { | |
| page_info = get_rx_page_info(rxo); | |
| put_page(page_info->page); | |
| memset(page_info, 0, sizeof(*page_info)); | |
| } | |
| } | |
| /* | |
| * skb_fill_rx_data forms a complete skb for an ether frame | |
| * indicated by rxcp. | |
| */ | |
| static void skb_fill_rx_data(struct be_rx_obj *rxo, struct sk_buff *skb, | |
| struct be_rx_compl_info *rxcp) | |
| { | |
| struct be_rx_page_info *page_info; | |
| u16 i, j; | |
| u16 hdr_len, curr_frag_len, remaining; | |
| u8 *start; | |
| page_info = get_rx_page_info(rxo); | |
| start = page_address(page_info->page) + page_info->page_offset; | |
| prefetch(start); | |
| /* Copy data in the first descriptor of this completion */ | |
| curr_frag_len = min(rxcp->pkt_size, rx_frag_size); | |
| skb->len = curr_frag_len; | |
| if (curr_frag_len <= BE_HDR_LEN) { /* tiny packet */ | |
| memcpy(skb->data, start, curr_frag_len); | |
| /* Complete packet has now been moved to data */ | |
| put_page(page_info->page); | |
| skb->data_len = 0; | |
| skb->tail += curr_frag_len; | |
| } else { | |
| hdr_len = ETH_HLEN; | |
| memcpy(skb->data, start, hdr_len); | |
| skb_shinfo(skb)->nr_frags = 1; | |
| skb_frag_set_page(skb, 0, page_info->page); | |
| skb_shinfo(skb)->frags[0].page_offset = | |
| page_info->page_offset + hdr_len; | |
| skb_frag_size_set(&skb_shinfo(skb)->frags[0], | |
| curr_frag_len - hdr_len); | |
| skb->data_len = curr_frag_len - hdr_len; | |
| skb->truesize += rx_frag_size; | |
| skb->tail += hdr_len; | |
| } | |
| page_info->page = NULL; | |
| if (rxcp->pkt_size <= rx_frag_size) { | |
| BUG_ON(rxcp->num_rcvd != 1); | |
| return; | |
| } | |
| /* More frags present for this completion */ | |
| remaining = rxcp->pkt_size - curr_frag_len; | |
| for (i = 1, j = 0; i < rxcp->num_rcvd; i++) { | |
| page_info = get_rx_page_info(rxo); | |
| curr_frag_len = min(remaining, rx_frag_size); | |
| /* Coalesce all frags from the same physical page in one slot */ | |
| if (page_info->page_offset == 0) { | |
| /* Fresh page */ | |
| j++; | |
| skb_frag_set_page(skb, j, page_info->page); | |
| skb_shinfo(skb)->frags[j].page_offset = | |
| page_info->page_offset; | |
| skb_frag_size_set(&skb_shinfo(skb)->frags[j], 0); | |
| skb_shinfo(skb)->nr_frags++; | |
| } else { | |
| put_page(page_info->page); | |
| } | |
| skb_frag_size_add(&skb_shinfo(skb)->frags[j], curr_frag_len); | |
| skb->len += curr_frag_len; | |
| skb->data_len += curr_frag_len; | |
| skb->truesize += rx_frag_size; | |
| remaining -= curr_frag_len; | |
| page_info->page = NULL; | |
| } | |
| BUG_ON(j > MAX_SKB_FRAGS); | |
| } | |
| /* Process the RX completion indicated by rxcp when GRO is disabled */ | |
| static void be_rx_compl_process(struct be_rx_obj *rxo, struct napi_struct *napi, | |
| struct be_rx_compl_info *rxcp) | |
| { | |
| struct be_adapter *adapter = rxo->adapter; | |
| struct net_device *netdev = adapter->netdev; | |
| struct sk_buff *skb; | |
| skb = netdev_alloc_skb_ip_align(netdev, BE_RX_SKB_ALLOC_SIZE); | |
| if (unlikely(!skb)) { | |
| rx_stats(rxo)->rx_drops_no_skbs++; | |
| be_rx_compl_discard(rxo, rxcp); | |
| return; | |
| } | |
| skb_fill_rx_data(rxo, skb, rxcp); | |
| if (likely((netdev->features & NETIF_F_RXCSUM) && csum_passed(rxcp))) | |
| skb->ip_summed = CHECKSUM_UNNECESSARY; | |
| else | |
| skb_checksum_none_assert(skb); | |
| skb->protocol = eth_type_trans(skb, netdev); | |
| skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]); | |
| if (netdev->features & NETIF_F_RXHASH) | |
| skb_set_hash(skb, rxcp->rss_hash, PKT_HASH_TYPE_L3); | |
| skb->csum_level = rxcp->tunneled; | |
| skb_mark_napi_id(skb, napi); | |
| if (rxcp->vlanf) | |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rxcp->vlan_tag); | |
| netif_receive_skb(skb); | |
| } | |
| /* Process the RX completion indicated by rxcp when GRO is enabled */ | |
| static void be_rx_compl_process_gro(struct be_rx_obj *rxo, | |
| struct napi_struct *napi, | |
| struct be_rx_compl_info *rxcp) | |
| { | |
| struct be_adapter *adapter = rxo->adapter; | |
| struct be_rx_page_info *page_info; | |
| struct sk_buff *skb = NULL; | |
| u16 remaining, curr_frag_len; | |
| u16 i, j; | |
| skb = napi_get_frags(napi); | |
| if (!skb) { | |
| be_rx_compl_discard(rxo, rxcp); | |
| return; | |
| } | |
| remaining = rxcp->pkt_size; | |
| for (i = 0, j = -1; i < rxcp->num_rcvd; i++) { | |
| page_info = get_rx_page_info(rxo); | |
| curr_frag_len = min(remaining, rx_frag_size); | |
| /* Coalesce all frags from the same physical page in one slot */ | |
| if (i == 0 || page_info->page_offset == 0) { | |
| /* First frag or Fresh page */ | |
| j++; | |
| skb_frag_set_page(skb, j, page_info->page); | |
| skb_shinfo(skb)->frags[j].page_offset = | |
| page_info->page_offset; | |
| skb_frag_size_set(&skb_shinfo(skb)->frags[j], 0); | |
| } else { | |
| put_page(page_info->page); | |
| } | |
| skb_frag_size_add(&skb_shinfo(skb)->frags[j], curr_frag_len); | |
| skb->truesize += rx_frag_size; | |
| remaining -= curr_frag_len; | |
| memset(page_info, 0, sizeof(*page_info)); | |
| } | |
| BUG_ON(j > MAX_SKB_FRAGS); | |
| skb_shinfo(skb)->nr_frags = j + 1; | |
| skb->len = rxcp->pkt_size; | |
| skb->data_len = rxcp->pkt_size; | |
| skb->ip_summed = CHECKSUM_UNNECESSARY; | |
| skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]); | |
| if (adapter->netdev->features & NETIF_F_RXHASH) | |
| skb_set_hash(skb, rxcp->rss_hash, PKT_HASH_TYPE_L3); | |
| skb->csum_level = rxcp->tunneled; | |
| if (rxcp->vlanf) | |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rxcp->vlan_tag); | |
| napi_gro_frags(napi); | |
| } | |
| static void be_parse_rx_compl_v1(struct be_eth_rx_compl *compl, | |
| struct be_rx_compl_info *rxcp) | |
| { | |
| rxcp->pkt_size = GET_RX_COMPL_V1_BITS(pktsize, compl); | |
| rxcp->vlanf = GET_RX_COMPL_V1_BITS(vtp, compl); | |
| rxcp->err = GET_RX_COMPL_V1_BITS(err, compl); | |
| rxcp->tcpf = GET_RX_COMPL_V1_BITS(tcpf, compl); | |
| rxcp->udpf = GET_RX_COMPL_V1_BITS(udpf, compl); | |
| rxcp->ip_csum = GET_RX_COMPL_V1_BITS(ipcksm, compl); | |
| rxcp->l4_csum = GET_RX_COMPL_V1_BITS(l4_cksm, compl); | |
| rxcp->ipv6 = GET_RX_COMPL_V1_BITS(ip_version, compl); | |
| rxcp->num_rcvd = GET_RX_COMPL_V1_BITS(numfrags, compl); | |
| rxcp->pkt_type = GET_RX_COMPL_V1_BITS(cast_enc, compl); | |
| rxcp->rss_hash = GET_RX_COMPL_V1_BITS(rsshash, compl); | |
| if (rxcp->vlanf) { | |
| rxcp->qnq = GET_RX_COMPL_V1_BITS(qnq, compl); | |
| rxcp->vlan_tag = GET_RX_COMPL_V1_BITS(vlan_tag, compl); | |
| } | |
| rxcp->port = GET_RX_COMPL_V1_BITS(port, compl); | |
| rxcp->tunneled = | |
| GET_RX_COMPL_V1_BITS(tunneled, compl); | |
| } | |
| static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl, | |
| struct be_rx_compl_info *rxcp) | |
| { | |
| rxcp->pkt_size = GET_RX_COMPL_V0_BITS(pktsize, compl); | |
| rxcp->vlanf = GET_RX_COMPL_V0_BITS(vtp, compl); | |
| rxcp->err = GET_RX_COMPL_V0_BITS(err, compl); | |
| rxcp->tcpf = GET_RX_COMPL_V0_BITS(tcpf, compl); | |
| rxcp->udpf = GET_RX_COMPL_V0_BITS(udpf, compl); | |
| rxcp->ip_csum = GET_RX_COMPL_V0_BITS(ipcksm, compl); | |
| rxcp->l4_csum = GET_RX_COMPL_V0_BITS(l4_cksm, compl); | |
| rxcp->ipv6 = GET_RX_COMPL_V0_BITS(ip_version, compl); | |
| rxcp->num_rcvd = GET_RX_COMPL_V0_BITS(numfrags, compl); | |
| rxcp->pkt_type = GET_RX_COMPL_V0_BITS(cast_enc, compl); | |
| rxcp->rss_hash = GET_RX_COMPL_V0_BITS(rsshash, compl); | |
| if (rxcp->vlanf) { | |
| rxcp->qnq = GET_RX_COMPL_V0_BITS(qnq, compl); | |
| rxcp->vlan_tag = GET_RX_COMPL_V0_BITS(vlan_tag, compl); | |
| } | |
| rxcp->port = GET_RX_COMPL_V0_BITS(port, compl); | |
| rxcp->ip_frag = GET_RX_COMPL_V0_BITS(ip_frag, compl); | |
| } | |
| static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) | |
| { | |
| struct be_eth_rx_compl *compl = queue_tail_node(&rxo->cq); | |
| struct be_rx_compl_info *rxcp = &rxo->rxcp; | |
| struct be_adapter *adapter = rxo->adapter; | |
| /* For checking the valid bit it is Ok to use either definition as the | |
| * valid bit is at the same position in both v0 and v1 Rx compl */ | |
| if (compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] == 0) | |
| return NULL; | |
| rmb(); | |
| be_dws_le_to_cpu(compl, sizeof(*compl)); | |
| if (adapter->be3_native) | |
| be_parse_rx_compl_v1(compl, rxcp); | |
| else | |
| be_parse_rx_compl_v0(compl, rxcp); | |
| if (rxcp->ip_frag) | |
| rxcp->l4_csum = 0; | |
| if (rxcp->vlanf) { | |
| /* In QNQ modes, if qnq bit is not set, then the packet was | |
| * tagged only with the transparent outer vlan-tag and must | |
| * not be treated as a vlan packet by host | |
| */ | |
| if (be_is_qnq_mode(adapter) && !rxcp->qnq) | |
| rxcp->vlanf = 0; | |
| if (!lancer_chip(adapter)) | |
| rxcp->vlan_tag = swab16(rxcp->vlan_tag); | |
| if (adapter->pvid == (rxcp->vlan_tag & VLAN_VID_MASK) && | |
| !test_bit(rxcp->vlan_tag, adapter->vids)) | |
| rxcp->vlanf = 0; | |
| } | |
| /* As the compl has been parsed, reset it; we wont touch it again */ | |
| compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] = 0; | |
| queue_tail_inc(&rxo->cq); | |
| return rxcp; | |
| } | |
| static inline struct page *be_alloc_pages(u32 size, gfp_t gfp) | |
| { | |
| u32 order = get_order(size); | |
| if (order > 0) | |
| gfp |= __GFP_COMP; | |
| return alloc_pages(gfp, order); | |
| } | |
| /* | |
| * Allocate a page, split it to fragments of size rx_frag_size and post as | |
| * receive buffers to BE | |
| */ | |
| static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp, u32 frags_needed) | |
| { | |
| struct be_adapter *adapter = rxo->adapter; | |
| struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL; | |
| struct be_queue_info *rxq = &rxo->q; | |
| struct page *pagep = NULL; | |
| struct device *dev = &adapter->pdev->dev; | |
| struct be_eth_rx_d *rxd; | |
| u64 page_dmaaddr = 0, frag_dmaaddr; | |
| u32 posted, page_offset = 0, notify = 0; | |
| page_info = &rxo->page_info_tbl[rxq->head]; | |
| for (posted = 0; posted < frags_needed && !page_info->page; posted++) { | |
| if (!pagep) { | |
| pagep = be_alloc_pages(adapter->big_page_size, gfp); | |
| if (unlikely(!pagep)) { | |
| rx_stats(rxo)->rx_post_fail++; | |
| break; | |
| } | |
| page_dmaaddr = dma_map_page(dev, pagep, 0, | |
| adapter->big_page_size, | |
| DMA_FROM_DEVICE); | |
| if (dma_mapping_error(dev, page_dmaaddr)) { | |
| put_page(pagep); | |
| pagep = NULL; | |
| adapter->drv_stats.dma_map_errors++; | |
| break; | |
| } | |
| page_offset = 0; | |
| } else { | |
| get_page(pagep); | |
| page_offset += rx_frag_size; | |
| } | |
| page_info->page_offset = page_offset; | |
| page_info->page = pagep; | |
| rxd = queue_head_node(rxq); | |
| frag_dmaaddr = page_dmaaddr + page_info->page_offset; | |
| rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF); | |
| rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr)); | |
| /* Any space left in the current big page for another frag? */ | |
| if ((page_offset + rx_frag_size + rx_frag_size) > | |
| adapter->big_page_size) { | |
| pagep = NULL; | |
| page_info->last_frag = true; | |
| dma_unmap_addr_set(page_info, bus, page_dmaaddr); | |
| } else { | |
| dma_unmap_addr_set(page_info, bus, frag_dmaaddr); | |
| } | |
| prev_page_info = page_info; | |
| queue_head_inc(rxq); | |
| page_info = &rxo->page_info_tbl[rxq->head]; | |
| } | |
| /* Mark the last frag of a page when we break out of the above loop | |
| * with no more slots available in the RXQ | |
| */ | |
| if (pagep) { | |
| prev_page_info->last_frag = true; | |
| dma_unmap_addr_set(prev_page_info, bus, page_dmaaddr); | |
| } | |
| if (posted) { | |
| atomic_add(posted, &rxq->used); | |
| if (rxo->rx_post_starved) | |
| rxo->rx_post_starved = false; | |
| do { | |
| notify = min(MAX_NUM_POST_ERX_DB, posted); | |
| be_rxq_notify(adapter, rxq->id, notify); | |
| posted -= notify; | |
| } while (posted); | |
| } else if (atomic_read(&rxq->used) == 0) { | |
| /* Let be_worker replenish when memory is available */ | |
| rxo->rx_post_starved = true; | |
| } | |
| } | |
| static struct be_tx_compl_info *be_tx_compl_get(struct be_tx_obj *txo) | |
| { | |
| struct be_queue_info *tx_cq = &txo->cq; | |
| struct be_tx_compl_info *txcp = &txo->txcp; | |
| struct be_eth_tx_compl *compl = queue_tail_node(tx_cq); | |
| if (compl->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0) | |
| return NULL; | |
| /* Ensure load ordering of valid bit dword and other dwords below */ | |
| rmb(); | |
| be_dws_le_to_cpu(compl, sizeof(*compl)); | |
| txcp->status = GET_TX_COMPL_BITS(status, compl); | |
| txcp->end_index = GET_TX_COMPL_BITS(wrb_index, compl); | |
| compl->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] = 0; | |
| queue_tail_inc(tx_cq); | |
| return txcp; | |
| } | |
| static u16 be_tx_compl_process(struct be_adapter *adapter, | |
| struct be_tx_obj *txo, u16 last_index) | |
| { | |
| struct sk_buff **sent_skbs = txo->sent_skb_list; | |
| struct be_queue_info *txq = &txo->q; | |
| struct sk_buff *skb = NULL; | |
| bool unmap_skb_hdr = false; | |
| struct be_eth_wrb *wrb; | |
| u16 num_wrbs = 0; | |
| u32 frag_index; | |
| do { | |
| if (sent_skbs[txq->tail]) { | |
| /* Free skb from prev req */ | |
| if (skb) | |
| dev_consume_skb_any(skb); | |
| skb = sent_skbs[txq->tail]; | |
| sent_skbs[txq->tail] = NULL; | |
| queue_tail_inc(txq); /* skip hdr wrb */ | |
| num_wrbs++; | |
| unmap_skb_hdr = true; | |
| } | |
| wrb = queue_tail_node(txq); | |
| frag_index = txq->tail; | |
| unmap_tx_frag(&adapter->pdev->dev, wrb, | |
| (unmap_skb_hdr && skb_headlen(skb))); | |
| unmap_skb_hdr = false; | |
| queue_tail_inc(txq); | |
| num_wrbs++; | |
| } while (frag_index != last_index); | |
| dev_consume_skb_any(skb); | |
| return num_wrbs; | |
| } | |
| /* Return the number of events in the event queue */ | |
| static inline int events_get(struct be_eq_obj *eqo) | |
| { | |
| struct be_eq_entry *eqe; | |
| int num = 0; | |
| do { | |
| eqe = queue_tail_node(&eqo->q); | |
| if (eqe->evt == 0) | |
| break; | |
| rmb(); | |
| eqe->evt = 0; | |
| num++; | |
| queue_tail_inc(&eqo->q); | |
| } while (true); | |
| return num; | |
| } | |
| /* Leaves the EQ is disarmed state */ | |
| static void be_eq_clean(struct be_eq_obj *eqo) | |
| { | |
| int num = events_get(eqo); | |
| be_eq_notify(eqo->adapter, eqo->q.id, false, true, num, 0); | |
| } | |
| /* Free posted rx buffers that were not used */ | |
| static void be_rxq_clean(struct be_rx_obj *rxo) | |
| { | |
| struct be_queue_info *rxq = &rxo->q; | |
| struct be_rx_page_info *page_info; | |
| while (atomic_read(&rxq->used) > 0) { | |
| page_info = get_rx_page_info(rxo); | |
| put_page(page_info->page); | |
| memset(page_info, 0, sizeof(*page_info)); | |
| } | |
| BUG_ON(atomic_read(&rxq->used)); | |
| rxq->tail = 0; | |
| rxq->head = 0; | |
| } | |
| static void be_rx_cq_clean(struct be_rx_obj *rxo) | |
| { | |
| struct be_queue_info *rx_cq = &rxo->cq; | |
| struct be_rx_compl_info *rxcp; | |
| struct be_adapter *adapter = rxo->adapter; | |
| int flush_wait = 0; | |
| /* Consume pending rx completions. | |
| * Wait for the flush completion (identified by zero num_rcvd) | |
| * to arrive. Notify CQ even when there are no more CQ entries | |
| * for HW to flush partially coalesced CQ entries. | |
| * In Lancer, there is no need to wait for flush compl. | |
| */ | |
| for (;;) { | |
| rxcp = be_rx_compl_get(rxo); | |
| if (!rxcp) { | |
| if (lancer_chip(adapter)) | |
| break; | |
| if (flush_wait++ > 50 || | |
| be_check_error(adapter, | |
| BE_ERROR_HW)) { | |
| dev_warn(&adapter->pdev->dev, | |
| "did not receive flush compl\n"); | |
| break; | |
| } | |
| be_cq_notify(adapter, rx_cq->id, true, 0); | |
| mdelay(1); | |
| } else { | |
| be_rx_compl_discard(rxo, rxcp); | |
| be_cq_notify(adapter, rx_cq->id, false, 1); | |
| if (rxcp->num_rcvd == 0) | |
| break; | |
| } | |
| } | |
| /* After cleanup, leave the CQ in unarmed state */ | |
| be_cq_notify(adapter, rx_cq->id, false, 0); | |
| } | |
| static void be_tx_compl_clean(struct be_adapter *adapter) | |
| { | |
| struct device *dev = &adapter->pdev->dev; | |
| u16 cmpl = 0, timeo = 0, num_wrbs = 0; | |
| struct be_tx_compl_info *txcp; | |
| struct be_queue_info *txq; | |
| u32 end_idx, notified_idx; | |
| struct be_tx_obj *txo; | |
| int i, pending_txqs; | |
| /* Stop polling for compls when HW has been silent for 10ms */ | |
| do { | |
| pending_txqs = adapter->num_tx_qs; | |
| for_all_tx_queues(adapter, txo, i) { | |
| cmpl = 0; | |
| num_wrbs = 0; | |
| txq = &txo->q; | |
| while ((txcp = be_tx_compl_get(txo))) { | |
| num_wrbs += | |
| be_tx_compl_process(adapter, txo, | |
| txcp->end_index); | |
| cmpl++; | |
| } | |
| if (cmpl) { | |
| be_cq_notify(adapter, txo->cq.id, false, cmpl); | |
| atomic_sub(num_wrbs, &txq->used); | |
| timeo = 0; | |
| } | |
| if (!be_is_tx_compl_pending(txo)) | |
| pending_txqs--; | |
| } | |
| if (pending_txqs == 0 || ++timeo > 10 || | |
| be_check_error(adapter, BE_ERROR_HW)) | |
| break; | |
| mdelay(1); | |
| } while (true); | |
| /* Free enqueued TX that was never notified to HW */ | |
| for_all_tx_queues(adapter, txo, i) { | |
| txq = &txo->q; | |
| if (atomic_read(&txq->used)) { | |
| dev_info(dev, "txq%d: cleaning %d pending tx-wrbs\n", | |
| i, atomic_read(&txq->used)); | |
| notified_idx = txq->tail; | |
| end_idx = txq->tail; | |
| index_adv(&end_idx, atomic_read(&txq->used) - 1, | |
| txq->len); | |
| /* Use the tx-compl process logic to handle requests | |
| * that were not sent to the HW. | |
| */ | |
| num_wrbs = be_tx_compl_process(adapter, txo, end_idx); | |
| atomic_sub(num_wrbs, &txq->used); | |
| BUG_ON(atomic_read(&txq->used)); | |
| txo->pend_wrb_cnt = 0; | |
| /* Since hw was never notified of these requests, | |
| * reset TXQ indices | |
| */ | |
| txq->head = notified_idx; | |
| txq->tail = notified_idx; | |
| } | |
| } | |
| } | |
| static void be_evt_queues_destroy(struct be_adapter *adapter) | |
| { | |
| struct be_eq_obj *eqo; | |
| int i; | |
| for_all_evt_queues(adapter, eqo, i) { | |
| if (eqo->q.created) { | |
| be_eq_clean(eqo); | |
| be_cmd_q_destroy(adapter, &eqo->q, QTYPE_EQ); | |
| netif_napi_del(&eqo->napi); | |
| free_cpumask_var(eqo->affinity_mask); | |
| } | |
| be_queue_free(adapter, &eqo->q); | |
| } | |
| } | |
| static int be_evt_queues_create(struct be_adapter *adapter) | |
| { | |
| struct be_queue_info *eq; | |
| struct be_eq_obj *eqo; | |
| struct be_aic_obj *aic; | |
| int i, rc; | |
| /* need enough EQs to service both RX and TX queues */ | |
| adapter->num_evt_qs = min_t(u16, num_irqs(adapter), | |
| max(adapter->cfg_num_rx_irqs, | |
| adapter->cfg_num_tx_irqs)); | |
| for_all_evt_queues(adapter, eqo, i) { | |
| int numa_node = dev_to_node(&adapter->pdev->dev); | |
| aic = &adapter->aic_obj[i]; | |
| eqo->adapter = adapter; | |
| eqo->idx = i; | |
| aic->max_eqd = BE_MAX_EQD; | |
| aic->enable = true; | |
| eq = &eqo->q; | |
| rc = be_queue_alloc(adapter, eq, EVNT_Q_LEN, | |
| sizeof(struct be_eq_entry)); | |
| if (rc) | |
| return rc; | |
| rc = be_cmd_eq_create(adapter, eqo); | |
| if (rc) | |
| return rc; | |
| if (!zalloc_cpumask_var(&eqo->affinity_mask, GFP_KERNEL)) | |
| return -ENOMEM; | |
| cpumask_set_cpu(cpumask_local_spread(i, numa_node), | |
| eqo->affinity_mask); | |
| netif_napi_add(adapter->netdev, &eqo->napi, be_poll, | |
| BE_NAPI_WEIGHT); | |
| } | |
| return 0; | |
| } | |
| static void be_mcc_queues_destroy(struct be_adapter *adapter) | |
| { | |
| struct be_queue_info *q; | |
| q = &adapter->mcc_obj.q; | |
| if (q->created) | |
| be_cmd_q_destroy(adapter, q, QTYPE_MCCQ); | |
| be_queue_free(adapter, q); | |
| q = &adapter->mcc_obj.cq; | |
| if (q->created) | |
| be_cmd_q_destroy(adapter, q, QTYPE_CQ); | |
| be_queue_free(adapter, q); | |
| } | |
| /* Must be called only after TX qs are created as MCC shares TX EQ */ | |
| static int be_mcc_queues_create(struct be_adapter *adapter) | |
| { | |
| struct be_queue_info *q, *cq; | |
| cq = &adapter->mcc_obj.cq; | |
| if (be_queue_alloc(adapter, cq, MCC_CQ_LEN, | |
| sizeof(struct be_mcc_compl))) | |
| goto err; | |
| /* Use the default EQ for MCC completions */ | |
| if (be_cmd_cq_create(adapter, cq, &mcc_eqo(adapter)->q, true, 0)) | |
| goto mcc_cq_free; | |
| q = &adapter->mcc_obj.q; | |
| if (be_queue_alloc(adapter, q, MCC_Q_LEN, sizeof(struct be_mcc_wrb))) | |
| goto mcc_cq_destroy; | |
| if (be_cmd_mccq_create(adapter, q, cq)) | |
| goto mcc_q_free; | |
| return 0; | |
| mcc_q_free: | |
| be_queue_free(adapter, q); | |
| mcc_cq_destroy: | |
| be_cmd_q_destroy(adapter, cq, QTYPE_CQ); | |
| mcc_cq_free: | |
| be_queue_free(adapter, cq); | |
| err: | |
| return -1; | |
| } | |
| static void be_tx_queues_destroy(struct be_adapter *adapter) | |
| { | |
| struct be_queue_info *q; | |
| struct be_tx_obj *txo; | |
| u8 i; | |
| for_all_tx_queues(adapter, txo, i) { | |
| q = &txo->q; | |
| if (q->created) | |
| be_cmd_q_destroy(adapter, q, QTYPE_TXQ); | |
| be_queue_free(adapter, q); | |
| q = &txo->cq; | |
| if (q->created) | |
| be_cmd_q_destroy(adapter, q, QTYPE_CQ); | |
| be_queue_free(adapter, q); | |
| } | |
| } | |
| static int be_tx_qs_create(struct be_adapter *adapter) | |
| { | |
| struct be_queue_info *cq; | |
| struct be_tx_obj *txo; | |
| struct be_eq_obj *eqo; | |
| int status, i; | |
| adapter->num_tx_qs = min(adapter->num_evt_qs, adapter->cfg_num_tx_irqs); | |
| for_all_tx_queues(adapter, txo, i) { | |
| cq = &txo->cq; | |
| status = be_queue_alloc(adapter, cq, TX_CQ_LEN, | |
| sizeof(struct be_eth_tx_compl)); | |
| if (status) | |
| return status; | |
| u64_stats_init(&txo->stats.sync); | |
| u64_stats_init(&txo->stats.sync_compl); | |
| /* If num_evt_qs is less than num_tx_qs, then more than | |
| * one txq share an eq | |
| */ | |
| eqo = &adapter->eq_obj[i % adapter->num_evt_qs]; | |
| status = be_cmd_cq_create(adapter, cq, &eqo->q, false, 3); | |
| if (status) | |
| return status; | |
| status = be_queue_alloc(adapter, &txo->q, TX_Q_LEN, | |
| sizeof(struct be_eth_wrb)); | |
| if (status) | |
| return status; | |
| status = be_cmd_txq_create(adapter, txo); | |
| if (status) | |
| return status; | |
| netif_set_xps_queue(adapter->netdev, eqo->affinity_mask, | |
| eqo->idx); | |
| } | |
| dev_info(&adapter->pdev->dev, "created %d TX queue(s)\n", | |
| adapter->num_tx_qs); | |
| return 0; | |
| } | |
| static void be_rx_cqs_destroy(struct be_adapter *adapter) | |
| { | |
| struct be_queue_info *q; | |
| struct be_rx_obj *rxo; | |
| int i; | |
| for_all_rx_queues(adapter, rxo, i) { | |
| q = &rxo->cq; | |
| if (q->created) | |
| be_cmd_q_destroy(adapter, q, QTYPE_CQ); | |
| be_queue_free(adapter, q); | |
| } | |
| } | |
| static int be_rx_cqs_create(struct be_adapter *adapter) | |
| { | |
| struct be_queue_info *eq, *cq; | |
| struct be_rx_obj *rxo; | |
| int rc, i; | |
| adapter->num_rss_qs = | |
| min(adapter->num_evt_qs, adapter->cfg_num_rx_irqs); | |
| /* We'll use RSS only if atleast 2 RSS rings are supported. */ | |
| if (adapter->num_rss_qs < 2) | |
| adapter->num_rss_qs = 0; | |
| adapter->num_rx_qs = adapter->num_rss_qs + adapter->need_def_rxq; | |
| /* When the interface is not capable of RSS rings (and there is no | |
| * need to create a default RXQ) we'll still need one RXQ | |
| */ | |
| if (adapter->num_rx_qs == 0) | |
| adapter->num_rx_qs = 1; | |
| adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; | |
| for_all_rx_queues(adapter, rxo, i) { | |
| rxo->adapter = adapter; | |
| cq = &rxo->cq; | |
| rc = be_queue_alloc(adapter, cq, RX_CQ_LEN, | |
| sizeof(struct be_eth_rx_compl)); | |
| if (rc) | |
| return rc; | |
| u64_stats_init(&rxo->stats.sync); | |
| eq = &adapter->eq_obj[i % adapter->num_evt_qs].q; | |
| rc = be_cmd_cq_create(adapter, cq, eq, false, 3); | |
| if (rc) | |
| return rc; | |
| } | |
| dev_info(&adapter->pdev->dev, | |
| "created %d RX queue(s)\n", adapter->num_rx_qs); | |
| return 0; | |
| } | |
| static irqreturn_t be_intx(int irq, void *dev) | |
| { | |
| struct be_eq_obj *eqo = dev; | |
| struct be_adapter *adapter = eqo->adapter; | |
| int num_evts = 0; | |
| /* IRQ is not expected when NAPI is scheduled as the EQ | |
| * will not be armed. | |
| * But, this can happen on Lancer INTx where it takes | |
| * a while to de-assert INTx or in BE2 where occasionaly | |
| * an interrupt may be raised even when EQ is unarmed. | |
| * If NAPI is already scheduled, then counting & notifying | |
| * events will orphan them. | |
| */ | |
| if (napi_schedule_prep(&eqo->napi)) { | |
| num_evts = events_get(eqo); | |
| __napi_schedule(&eqo->napi); | |
| if (num_evts) | |
| eqo->spurious_intr = 0; | |
| } | |
| be_eq_notify(adapter, eqo->q.id, false, true, num_evts, 0); | |
| /* Return IRQ_HANDLED only for the the first spurious intr | |
| * after a valid intr to stop the kernel from branding | |
| * this irq as a bad one! | |
| */ | |
| if (num_evts || eqo->spurious_intr++ == 0) | |
| return IRQ_HANDLED; | |
| else | |
| return IRQ_NONE; | |
| } | |
| static irqreturn_t be_msix(int irq, void *dev) | |
| { | |
| struct be_eq_obj *eqo = dev; | |
| be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0, 0); | |
| napi_schedule(&eqo->napi); | |
| return IRQ_HANDLED; | |
| } | |
| static inline bool do_gro(struct be_rx_compl_info *rxcp) | |
| { | |
| return (rxcp->tcpf && !rxcp->err && rxcp->l4_csum) ? true : false; | |
| } | |
| static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi, | |
| int budget) | |
| { | |
| struct be_adapter *adapter = rxo->adapter; | |
| struct be_queue_info *rx_cq = &rxo->cq; | |
| struct be_rx_compl_info *rxcp; | |
| u32 work_done; | |
| u32 frags_consumed = 0; | |
| for (work_done = 0; work_done < budget; work_done++) { | |
| rxcp = be_rx_compl_get(rxo); | |
| if (!rxcp) | |
| break; | |
| /* Is it a flush compl that has no data */ | |
| if (unlikely(rxcp->num_rcvd == 0)) | |
| goto loop_continue; | |
| /* Discard compl with partial DMA Lancer B0 */ | |
| if (unlikely(!rxcp->pkt_size)) { | |
| be_rx_compl_discard(rxo, rxcp); | |
| goto loop_continue; | |
| } | |
| /* On BE drop pkts that arrive due to imperfect filtering in | |
| * promiscuous mode on some skews | |
| */ | |
| if (unlikely(rxcp->port != adapter->port_num && | |
| !lancer_chip(adapter))) { | |
| be_rx_compl_discard(rxo, rxcp); | |
| goto loop_continue; | |
| } | |
| if (do_gro(rxcp)) | |
| be_rx_compl_process_gro(rxo, napi, rxcp); | |
| else | |
| be_rx_compl_process(rxo, napi, rxcp); | |
| loop_continue: | |
| frags_consumed += rxcp->num_rcvd; | |
| be_rx_stats_update(rxo, rxcp); | |
| } | |
| if (work_done) { | |
| be_cq_notify(adapter, rx_cq->id, true, work_done); | |
| /* When an rx-obj gets into post_starved state, just | |
| * let be_worker do the posting. | |
| */ | |
| if (atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM && | |
| !rxo->rx_post_starved) | |
| be_post_rx_frags(rxo, GFP_ATOMIC, | |
| max_t(u32, MAX_RX_POST, | |
| frags_consumed)); | |
| } | |
| return work_done; | |
| } | |
| static inline void be_update_tx_err(struct be_tx_obj *txo, u8 status) | |
| { | |
| switch (status) { | |
| case BE_TX_COMP_HDR_PARSE_ERR: | |
| tx_stats(txo)->tx_hdr_parse_err++; | |
| break; | |
| case BE_TX_COMP_NDMA_ERR: | |
| tx_stats(txo)->tx_dma_err++; | |
| break; | |
| case BE_TX_COMP_ACL_ERR: | |
| tx_stats(txo)->tx_spoof_check_err++; | |
| break; | |
| } | |
| } | |
| static inline void lancer_update_tx_err(struct be_tx_obj *txo, u8 status) | |
| { | |
| switch (status) { | |
| case LANCER_TX_COMP_LSO_ERR: | |
| tx_stats(txo)->tx_tso_err++; | |
| break; | |
| case LANCER_TX_COMP_HSW_DROP_MAC_ERR: | |
| case LANCER_TX_COMP_HSW_DROP_VLAN_ERR: | |
| tx_stats(txo)->tx_spoof_check_err++; | |
| break; | |
| case LANCER_TX_COMP_QINQ_ERR: | |
| tx_stats(txo)->tx_qinq_err++; | |
| break; | |
| case LANCER_TX_COMP_PARITY_ERR: | |
| tx_stats(txo)->tx_internal_parity_err++; | |
| break; | |
| case LANCER_TX_COMP_DMA_ERR: | |
| tx_stats(txo)->tx_dma_err++; | |
| break; | |
| } | |
| } | |
| static void be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo, | |
| int idx) | |
| { | |
| int num_wrbs = 0, work_done = 0; | |
| struct be_tx_compl_info *txcp; | |
| while ((txcp = be_tx_compl_get(txo))) { | |
| num_wrbs += be_tx_compl_process(adapter, txo, txcp->end_index); | |
| work_done++; | |
| if (txcp->status) { | |
| if (lancer_chip(adapter)) | |
| lancer_update_tx_err(txo, txcp->status); | |
| else | |
| be_update_tx_err(txo, txcp->status); | |
| } | |
| } | |
| if (work_done) { | |
| be_cq_notify(adapter, txo->cq.id, true, work_done); | |
| atomic_sub(num_wrbs, &txo->q.used); | |
| /* As Tx wrbs have been freed up, wake up netdev queue | |
| * if it was stopped due to lack of tx wrbs. */ | |
| if (__netif_subqueue_stopped(adapter->netdev, idx) && | |
| be_can_txq_wake(txo)) { | |
| netif_wake_subqueue(adapter->netdev, idx); | |
| } | |
| u64_stats_update_begin(&tx_stats(txo)->sync_compl); | |
| tx_stats(txo)->tx_compl += work_done; | |
| u64_stats_update_end(&tx_stats(txo)->sync_compl); | |
| } | |
| } | |
| int be_poll(struct napi_struct *napi, int budget) | |
| { | |
| struct be_eq_obj *eqo = container_of(napi, struct be_eq_obj, napi); | |
| struct be_adapter *adapter = eqo->adapter; | |
| int max_work = 0, work, i, num_evts; | |
| struct be_rx_obj *rxo; | |
| struct be_tx_obj *txo; | |
| u32 mult_enc = 0; | |
| num_evts = events_get(eqo); | |
| for_all_tx_queues_on_eq(adapter, eqo, txo, i) | |
| be_process_tx(adapter, txo, i); | |
| /* This loop will iterate twice for EQ0 in which | |
| * completions of the last RXQ (default one) are also processed | |
| * For other EQs the loop iterates only once | |
| */ | |
| for_all_rx_queues_on_eq(adapter, eqo, rxo, i) { | |
| work = be_process_rx(rxo, napi, budget); | |
| max_work = max(work, max_work); | |
| } | |
| if (is_mcc_eqo(eqo)) | |
| be_process_mcc(adapter); | |
| if (max_work < budget) { | |
| napi_complete_done(napi, max_work); | |
| /* Skyhawk EQ_DB has a provision to set the rearm to interrupt | |
| * delay via a delay multiplier encoding value | |
| */ | |
| if (skyhawk_chip(adapter)) | |
| mult_enc = be_get_eq_delay_mult_enc(eqo); | |
| be_eq_notify(adapter, eqo->q.id, true, false, num_evts, | |
| mult_enc); | |
| } else { | |
| /* As we'll continue in polling mode, count and clear events */ | |
| be_eq_notify(adapter, eqo->q.id, false, false, num_evts, 0); | |
| } | |
| return max_work; | |
| } | |
| void be_detect_error(struct be_adapter *adapter) | |
| { | |
| u32 ue_lo = 0, ue_hi = 0, ue_lo_mask = 0, ue_hi_mask = 0; | |
| u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0; | |
| struct device *dev = &adapter->pdev->dev; | |
| u16 val; | |
| u32 i; | |
| if (be_check_error(adapter, BE_ERROR_HW)) | |
| return; | |
| if (lancer_chip(adapter)) { | |
| sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET); | |
| if (sliport_status & SLIPORT_STATUS_ERR_MASK) { | |
| be_set_error(adapter, BE_ERROR_UE); | |
| sliport_err1 = ioread32(adapter->db + | |
| SLIPORT_ERROR1_OFFSET); | |
| sliport_err2 = ioread32(adapter->db + | |
| SLIPORT_ERROR2_OFFSET); | |
| /* Do not log error messages if its a FW reset */ | |
| if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 && | |
| sliport_err2 == SLIPORT_ERROR_FW_RESET2) { | |
| dev_info(dev, "Firmware update in progress\n"); | |
| } else { | |
| dev_err(dev, "Error detected in the card\n"); | |
| dev_err(dev, "ERR: sliport status 0x%x\n", | |
| sliport_status); | |
| dev_err(dev, "ERR: sliport error1 0x%x\n", | |
| sliport_err1); | |
| dev_err(dev, "ERR: sliport error2 0x%x\n", | |
| sliport_err2); | |
| } | |
| } | |
| } else { | |
| ue_lo = ioread32(adapter->pcicfg + PCICFG_UE_STATUS_LOW); | |
| ue_hi = ioread32(adapter->pcicfg + PCICFG_UE_STATUS_HIGH); | |
| ue_lo_mask = ioread32(adapter->pcicfg + | |
| PCICFG_UE_STATUS_LOW_MASK); | |
| ue_hi_mask = ioread32(adapter->pcicfg + | |
| PCICFG_UE_STATUS_HI_MASK); | |
| ue_lo = (ue_lo & ~ue_lo_mask); | |
| ue_hi = (ue_hi & ~ue_hi_mask); | |
| if (ue_lo || ue_hi) { | |
| /* On certain platforms BE3 hardware can indicate | |
| * spurious UEs. In case of a UE in the chip, | |
| * the POST register correctly reports either a | |
| * FAT_LOG_START state (FW is currently dumping | |
| * FAT log data) or a ARMFW_UE state. Check for the | |
| * above states to ascertain if the UE is valid or not. | |
| */ | |
| if (BE3_chip(adapter)) { | |
| val = be_POST_stage_get(adapter); | |
| if ((val & POST_STAGE_FAT_LOG_START) | |
| != POST_STAGE_FAT_LOG_START && | |
| (val & POST_STAGE_ARMFW_UE) | |
| != POST_STAGE_ARMFW_UE) | |
| return; | |
| } | |
| dev_err(dev, "Error detected in the adapter"); | |
| be_set_error(adapter, BE_ERROR_UE); | |
| for (i = 0; ue_lo; ue_lo >>= 1, i++) { | |
| if (ue_lo & 1) | |
| dev_err(dev, "UE: %s bit set\n", | |
| ue_status_low_desc[i]); | |
| } | |
| for (i = 0; ue_hi; ue_hi >>= 1, i++) { | |
| if (ue_hi & 1) | |
| dev_err(dev, "UE: %s bit set\n", | |
| ue_status_hi_desc[i]); | |
| } | |
| } | |
| } | |
| } | |
| static void be_msix_disable(struct be_adapter *adapter) | |
| { | |
| if (msix_enabled(adapter)) { | |
| pci_disable_msix(adapter->pdev); | |
| adapter->num_msix_vec = 0; | |
| adapter->num_msix_roce_vec = 0; | |
| } | |
| } | |
| static int be_msix_enable(struct be_adapter *adapter) | |
| { | |
| unsigned int i, max_roce_eqs; | |
| struct device *dev = &adapter->pdev->dev; | |
| int num_vec; | |
| /* If RoCE is supported, program the max number of vectors that | |
| * could be used for NIC and RoCE, else, just program the number | |
| * we'll use initially. | |
| */ | |
| if (be_roce_supported(adapter)) { | |
| max_roce_eqs = | |
| be_max_func_eqs(adapter) - be_max_nic_eqs(adapter); | |
| max_roce_eqs = min(max_roce_eqs, num_online_cpus()); | |
| num_vec = be_max_any_irqs(adapter) + max_roce_eqs; | |
| } else { | |
| num_vec = max(adapter->cfg_num_rx_irqs, | |
| adapter->cfg_num_tx_irqs); | |
| } | |
| for (i = 0; i < num_vec; i++) | |
| adapter->msix_entries[i].entry = i; | |
| num_vec = pci_enable_msix_range(adapter->pdev, adapter->msix_entries, | |
| MIN_MSIX_VECTORS, num_vec); | |
| if (num_vec < 0) | |
| goto fail; | |
| if (be_roce_supported(adapter) && num_vec > MIN_MSIX_VECTORS) { | |
| adapter->num_msix_roce_vec = num_vec / 2; | |
| dev_info(dev, "enabled %d MSI-x vector(s) for RoCE\n", | |
| adapter->num_msix_roce_vec); | |
| } | |
| adapter->num_msix_vec = num_vec - adapter->num_msix_roce_vec; | |
| dev_info(dev, "enabled %d MSI-x vector(s) for NIC\n", | |
| adapter->num_msix_vec); | |
| return 0; | |
| fail: | |
| dev_warn(dev, "MSIx enable failed\n"); | |
| /* INTx is not supported in VFs, so fail probe if enable_msix fails */ | |
| if (be_virtfn(adapter)) | |
| return num_vec; | |
| return 0; | |
| } | |
| static inline int be_msix_vec_get(struct be_adapter *adapter, | |
| struct be_eq_obj *eqo) | |
| { | |
| return adapter->msix_entries[eqo->msix_idx].vector; | |
| } | |
| static int be_msix_register(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct be_eq_obj *eqo; | |
| int status, i, vec; | |
| for_all_evt_queues(adapter, eqo, i) { | |
| sprintf(eqo->desc, "%s-q%d", netdev->name, i); | |
| vec = be_msix_vec_get(adapter, eqo); | |
| status = request_irq(vec, be_msix, 0, eqo->desc, eqo); | |
| if (status) | |
| goto err_msix; | |
| irq_set_affinity_hint(vec, eqo->affinity_mask); | |
| } | |
| return 0; | |
| err_msix: | |
| for (i--; i >= 0; i--) { | |
| eqo = &adapter->eq_obj[i]; | |
| free_irq(be_msix_vec_get(adapter, eqo), eqo); | |
| } | |
| dev_warn(&adapter->pdev->dev, "MSIX Request IRQ failed - err %d\n", | |
| status); | |
| be_msix_disable(adapter); | |
| return status; | |
| } | |
| static int be_irq_register(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| int status; | |
| if (msix_enabled(adapter)) { | |
| status = be_msix_register(adapter); | |
| if (status == 0) | |
| goto done; | |
| /* INTx is not supported for VF */ | |
| if (be_virtfn(adapter)) | |
| return status; | |
| } | |
| /* INTx: only the first EQ is used */ | |
| netdev->irq = adapter->pdev->irq; | |
| status = request_irq(netdev->irq, be_intx, IRQF_SHARED, netdev->name, | |
| &adapter->eq_obj[0]); | |
| if (status) { | |
| dev_err(&adapter->pdev->dev, | |
| "INTx request IRQ failed - err %d\n", status); | |
| return status; | |
| } | |
| done: | |
| adapter->isr_registered = true; | |
| return 0; | |
| } | |
| static void be_irq_unregister(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct be_eq_obj *eqo; | |
| int i, vec; | |
| if (!adapter->isr_registered) | |
| return; | |
| /* INTx */ | |
| if (!msix_enabled(adapter)) { | |
| free_irq(netdev->irq, &adapter->eq_obj[0]); | |
| goto done; | |
| } | |
| /* MSIx */ | |
| for_all_evt_queues(adapter, eqo, i) { | |
| vec = be_msix_vec_get(adapter, eqo); | |
| irq_set_affinity_hint(vec, NULL); | |
| free_irq(vec, eqo); | |
| } | |
| done: | |
| adapter->isr_registered = false; | |
| } | |
| static void be_rx_qs_destroy(struct be_adapter *adapter) | |
| { | |
| struct rss_info *rss = &adapter->rss_info; | |
| struct be_queue_info *q; | |
| struct be_rx_obj *rxo; | |
| int i; | |
| for_all_rx_queues(adapter, rxo, i) { | |
| q = &rxo->q; | |
| if (q->created) { | |
| /* If RXQs are destroyed while in an "out of buffer" | |
| * state, there is a possibility of an HW stall on | |
| * Lancer. So, post 64 buffers to each queue to relieve | |
| * the "out of buffer" condition. | |
| * Make sure there's space in the RXQ before posting. | |
| */ | |
| if (lancer_chip(adapter)) { | |
| be_rx_cq_clean(rxo); | |
| if (atomic_read(&q->used) == 0) | |
| be_post_rx_frags(rxo, GFP_KERNEL, | |
| MAX_RX_POST); | |
| } | |
| be_cmd_rxq_destroy(adapter, q); | |
| be_rx_cq_clean(rxo); | |
| be_rxq_clean(rxo); | |
| } | |
| be_queue_free(adapter, q); | |
| } | |
| if (rss->rss_flags) { | |
| rss->rss_flags = RSS_ENABLE_NONE; | |
| be_cmd_rss_config(adapter, rss->rsstable, rss->rss_flags, | |
| 128, rss->rss_hkey); | |
| } | |
| } | |
| static void be_disable_if_filters(struct be_adapter *adapter) | |
| { | |
| /* Don't delete MAC on BE3 VFs without FILTMGMT privilege */ | |
| if (!BEx_chip(adapter) || !be_virtfn(adapter) || | |
| check_privilege(adapter, BE_PRIV_FILTMGMT)) { | |
| be_dev_mac_del(adapter, adapter->pmac_id[0]); | |
| eth_zero_addr(adapter->dev_mac); | |
| } | |
| be_clear_uc_list(adapter); | |
| be_clear_mc_list(adapter); | |
| /* The IFACE flags are enabled in the open path and cleared | |
| * in the close path. When a VF gets detached from the host and | |
| * assigned to a VM the following happens: | |
| * - VF's IFACE flags get cleared in the detach path | |
| * - IFACE create is issued by the VF in the attach path | |
| * Due to a bug in the BE3/Skyhawk-R FW | |
| * (Lancer FW doesn't have the bug), the IFACE capability flags | |
| * specified along with the IFACE create cmd issued by a VF are not | |
| * honoured by FW. As a consequence, if a *new* driver | |
| * (that enables/disables IFACE flags in open/close) | |
| * is loaded in the host and an *old* driver is * used by a VM/VF, | |
| * the IFACE gets created *without* the needed flags. | |
| * To avoid this, disable RX-filter flags only for Lancer. | |
| */ | |
| if (lancer_chip(adapter)) { | |
| be_cmd_rx_filter(adapter, BE_IF_ALL_FILT_FLAGS, OFF); | |
| adapter->if_flags &= ~BE_IF_ALL_FILT_FLAGS; | |
| } | |
| } | |
| static int be_close(struct net_device *netdev) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct be_eq_obj *eqo; | |
| int i; | |
| /* This protection is needed as be_close() may be called even when the | |
| * adapter is in cleared state (after eeh perm failure) | |
| */ | |
| if (!(adapter->flags & BE_FLAGS_SETUP_DONE)) | |
| return 0; | |
| /* Before attempting cleanup ensure all the pending cmds in the | |
| * config_wq have finished execution | |
| */ | |
| flush_workqueue(be_wq); | |
| be_disable_if_filters(adapter); | |
| if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { | |
| for_all_evt_queues(adapter, eqo, i) { | |
| napi_disable(&eqo->napi); | |
| } | |
| adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; | |
| } | |
| be_async_mcc_disable(adapter); | |
| /* Wait for all pending tx completions to arrive so that | |
| * all tx skbs are freed. | |
| */ | |
| netif_tx_disable(netdev); | |
| be_tx_compl_clean(adapter); | |
| be_rx_qs_destroy(adapter); | |
| for_all_evt_queues(adapter, eqo, i) { | |
| if (msix_enabled(adapter)) | |
| synchronize_irq(be_msix_vec_get(adapter, eqo)); | |
| else | |
| synchronize_irq(netdev->irq); | |
| be_eq_clean(eqo); | |
| } | |
| be_irq_unregister(adapter); | |
| return 0; | |
| } | |
| static int be_rx_qs_create(struct be_adapter *adapter) | |
| { | |
| struct rss_info *rss = &adapter->rss_info; | |
| u8 rss_key[RSS_HASH_KEY_LEN]; | |
| struct be_rx_obj *rxo; | |
| int rc, i, j; | |
| for_all_rx_queues(adapter, rxo, i) { | |
| rc = be_queue_alloc(adapter, &rxo->q, RX_Q_LEN, | |
| sizeof(struct be_eth_rx_d)); | |
| if (rc) | |
| return rc; | |
| } | |
| if (adapter->need_def_rxq || !adapter->num_rss_qs) { | |
| rxo = default_rxo(adapter); | |
| rc = be_cmd_rxq_create(adapter, &rxo->q, rxo->cq.id, | |
| rx_frag_size, adapter->if_handle, | |
| false, &rxo->rss_id); | |
| if (rc) | |
| return rc; | |
| } | |
| for_all_rss_queues(adapter, rxo, i) { | |
| rc = be_cmd_rxq_create(adapter, &rxo->q, rxo->cq.id, | |
| rx_frag_size, adapter->if_handle, | |
| true, &rxo->rss_id); | |
| if (rc) | |
| return rc; | |
| } | |
| if (be_multi_rxq(adapter)) { | |
| for (j = 0; j < RSS_INDIR_TABLE_LEN; j += adapter->num_rss_qs) { | |
| for_all_rss_queues(adapter, rxo, i) { | |
| if ((j + i) >= RSS_INDIR_TABLE_LEN) | |
| break; | |
| rss->rsstable[j + i] = rxo->rss_id; | |
| rss->rss_queue[j + i] = i; | |
| } | |
| } | |
| rss->rss_flags = RSS_ENABLE_TCP_IPV4 | RSS_ENABLE_IPV4 | | |
| RSS_ENABLE_TCP_IPV6 | RSS_ENABLE_IPV6; | |
| if (!BEx_chip(adapter)) | |
| rss->rss_flags |= RSS_ENABLE_UDP_IPV4 | | |
| RSS_ENABLE_UDP_IPV6; | |
| netdev_rss_key_fill(rss_key, RSS_HASH_KEY_LEN); | |
| rc = be_cmd_rss_config(adapter, rss->rsstable, rss->rss_flags, | |
| RSS_INDIR_TABLE_LEN, rss_key); | |
| if (rc) { | |
| rss->rss_flags = RSS_ENABLE_NONE; | |
| return rc; | |
| } | |
| memcpy(rss->rss_hkey, rss_key, RSS_HASH_KEY_LEN); | |
| } else { | |
| /* Disable RSS, if only default RX Q is created */ | |
| rss->rss_flags = RSS_ENABLE_NONE; | |
| } | |
| /* Post 1 less than RXQ-len to avoid head being equal to tail, | |
| * which is a queue empty condition | |
| */ | |
| for_all_rx_queues(adapter, rxo, i) | |
| be_post_rx_frags(rxo, GFP_KERNEL, RX_Q_LEN - 1); | |
| return 0; | |
| } | |
| static int be_enable_if_filters(struct be_adapter *adapter) | |
| { | |
| int status; | |
| status = be_cmd_rx_filter(adapter, BE_IF_FILT_FLAGS_BASIC, ON); | |
| if (status) | |
| return status; | |
| /* Normally this condition usually true as the ->dev_mac is zeroed. | |
| * But on BE3 VFs the initial MAC is pre-programmed by PF and | |
| * subsequent be_dev_mac_add() can fail (after fresh boot) | |
| */ | |
| if (!ether_addr_equal(adapter->dev_mac, adapter->netdev->dev_addr)) { | |
| int old_pmac_id = -1; | |
| /* Remember old programmed MAC if any - can happen on BE3 VF */ | |
| if (!is_zero_ether_addr(adapter->dev_mac)) | |
| old_pmac_id = adapter->pmac_id[0]; | |
| status = be_dev_mac_add(adapter, adapter->netdev->dev_addr); | |
| if (status) | |
| return status; | |
| /* Delete the old programmed MAC as we successfully programmed | |
| * a new MAC | |
| */ | |
| if (old_pmac_id >= 0 && old_pmac_id != adapter->pmac_id[0]) | |
| be_dev_mac_del(adapter, old_pmac_id); | |
| ether_addr_copy(adapter->dev_mac, adapter->netdev->dev_addr); | |
| } | |
| if (adapter->vlans_added) | |
| be_vid_config(adapter); | |
| __be_set_rx_mode(adapter); | |
| return 0; | |
| } | |
| static int be_open(struct net_device *netdev) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct be_eq_obj *eqo; | |
| struct be_rx_obj *rxo; | |
| struct be_tx_obj *txo; | |
| u8 link_status; | |
| int status, i; | |
| status = be_rx_qs_create(adapter); | |
| if (status) | |
| goto err; | |
| status = be_enable_if_filters(adapter); | |
| if (status) | |
| goto err; | |
| status = be_irq_register(adapter); | |
| if (status) | |
| goto err; | |
| for_all_rx_queues(adapter, rxo, i) | |
| be_cq_notify(adapter, rxo->cq.id, true, 0); | |
| for_all_tx_queues(adapter, txo, i) | |
| be_cq_notify(adapter, txo->cq.id, true, 0); | |
| be_async_mcc_enable(adapter); | |
| for_all_evt_queues(adapter, eqo, i) { | |
| napi_enable(&eqo->napi); | |
| be_eq_notify(adapter, eqo->q.id, true, true, 0, 0); | |
| } | |
| adapter->flags |= BE_FLAGS_NAPI_ENABLED; | |
| status = be_cmd_link_status_query(adapter, NULL, &link_status, 0); | |
| if (!status) | |
| be_link_status_update(adapter, link_status); | |
| netif_tx_start_all_queues(netdev); | |
| if (skyhawk_chip(adapter)) | |
| udp_tunnel_get_rx_info(netdev); | |
| return 0; | |
| err: | |
| be_close(adapter->netdev); | |
| return -EIO; | |
| } | |
| static void be_vf_eth_addr_generate(struct be_adapter *adapter, u8 *mac) | |
| { | |
| u32 addr; | |
| addr = jhash(adapter->netdev->dev_addr, ETH_ALEN, 0); | |
| mac[5] = (u8)(addr & 0xFF); | |
| mac[4] = (u8)((addr >> 8) & 0xFF); | |
| mac[3] = (u8)((addr >> 16) & 0xFF); | |
| /* Use the OUI from the current MAC address */ | |
| memcpy(mac, adapter->netdev->dev_addr, 3); | |
| } | |
| /* | |
| * Generate a seed MAC address from the PF MAC Address using jhash. | |
| * MAC Address for VFs are assigned incrementally starting from the seed. | |
| * These addresses are programmed in the ASIC by the PF and the VF driver | |
| * queries for the MAC address during its probe. | |
| */ | |
| static int be_vf_eth_addr_config(struct be_adapter *adapter) | |
| { | |
| u32 vf; | |
| int status = 0; | |
| u8 mac[ETH_ALEN]; | |
| struct be_vf_cfg *vf_cfg; | |
| be_vf_eth_addr_generate(adapter, mac); | |
| for_all_vfs(adapter, vf_cfg, vf) { | |
| if (BEx_chip(adapter)) | |
| status = be_cmd_pmac_add(adapter, mac, | |
| vf_cfg->if_handle, | |
| &vf_cfg->pmac_id, vf + 1); | |
| else | |
| status = be_cmd_set_mac(adapter, mac, vf_cfg->if_handle, | |
| vf + 1); | |
| if (status) | |
| dev_err(&adapter->pdev->dev, | |
| "Mac address assignment failed for VF %d\n", | |
| vf); | |
| else | |
| memcpy(vf_cfg->mac_addr, mac, ETH_ALEN); | |
| mac[5] += 1; | |
| } | |
| return status; | |
| } | |
| static int be_vfs_mac_query(struct be_adapter *adapter) | |
| { | |
| int status, vf; | |
| u8 mac[ETH_ALEN]; | |
| struct be_vf_cfg *vf_cfg; | |
| for_all_vfs(adapter, vf_cfg, vf) { | |
| status = be_cmd_get_active_mac(adapter, vf_cfg->pmac_id, | |
| mac, vf_cfg->if_handle, | |
| false, vf+1); | |
| if (status) | |
| return status; | |
| memcpy(vf_cfg->mac_addr, mac, ETH_ALEN); | |
| } | |
| return 0; | |
| } | |
| static void be_vf_clear(struct be_adapter *adapter) | |
| { | |
| struct be_vf_cfg *vf_cfg; | |
| u32 vf; | |
| if (pci_vfs_assigned(adapter->pdev)) { | |
| dev_warn(&adapter->pdev->dev, | |
| "VFs are assigned to VMs: not disabling VFs\n"); | |
| goto done; | |
| } | |
| pci_disable_sriov(adapter->pdev); | |
| for_all_vfs(adapter, vf_cfg, vf) { | |
| if (BEx_chip(adapter)) | |
| be_cmd_pmac_del(adapter, vf_cfg->if_handle, | |
| vf_cfg->pmac_id, vf + 1); | |
| else | |
| be_cmd_set_mac(adapter, NULL, vf_cfg->if_handle, | |
| vf + 1); | |
| be_cmd_if_destroy(adapter, vf_cfg->if_handle, vf + 1); | |
| } | |
| if (BE3_chip(adapter)) | |
| be_cmd_set_hsw_config(adapter, 0, 0, | |
| adapter->if_handle, | |
| PORT_FWD_TYPE_PASSTHRU, 0); | |
| done: | |
| kfree(adapter->vf_cfg); | |
| adapter->num_vfs = 0; | |
| adapter->flags &= ~BE_FLAGS_SRIOV_ENABLED; | |
| } | |
| static void be_clear_queues(struct be_adapter *adapter) | |
| { | |
| be_mcc_queues_destroy(adapter); | |
| be_rx_cqs_destroy(adapter); | |
| be_tx_queues_destroy(adapter); | |
| be_evt_queues_destroy(adapter); | |
| } | |
| static void be_cancel_worker(struct be_adapter *adapter) | |
| { | |
| if (adapter->flags & BE_FLAGS_WORKER_SCHEDULED) { | |
| cancel_delayed_work_sync(&adapter->work); | |
| adapter->flags &= ~BE_FLAGS_WORKER_SCHEDULED; | |
| } | |
| } | |
| static void be_cancel_err_detection(struct be_adapter *adapter) | |
| { | |
| struct be_error_recovery *err_rec = &adapter->error_recovery; | |
| if (!be_err_recovery_workq) | |
| return; | |
| if (adapter->flags & BE_FLAGS_ERR_DETECTION_SCHEDULED) { | |
| cancel_delayed_work_sync(&err_rec->err_detection_work); | |
| adapter->flags &= ~BE_FLAGS_ERR_DETECTION_SCHEDULED; | |
| } | |
| } | |
| static int be_enable_vxlan_offloads(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct device *dev = &adapter->pdev->dev; | |
| struct be_vxlan_port *vxlan_port; | |
| __be16 port; | |
| int status; | |
| vxlan_port = list_first_entry(&adapter->vxlan_port_list, | |
| struct be_vxlan_port, list); | |
| port = vxlan_port->port; | |
| status = be_cmd_manage_iface(adapter, adapter->if_handle, | |
| OP_CONVERT_NORMAL_TO_TUNNEL); | |
| if (status) { | |
| dev_warn(dev, "Failed to convert normal interface to tunnel\n"); | |
| return status; | |
| } | |
| adapter->flags |= BE_FLAGS_VXLAN_OFFLOADS; | |
| status = be_cmd_set_vxlan_port(adapter, port); | |
| if (status) { | |
| dev_warn(dev, "Failed to add VxLAN port\n"); | |
| return status; | |
| } | |
| adapter->vxlan_port = port; | |
| netdev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | | |
| NETIF_F_TSO | NETIF_F_TSO6 | | |
| NETIF_F_GSO_UDP_TUNNEL; | |
| netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL; | |
| netdev->features |= NETIF_F_GSO_UDP_TUNNEL; | |
| dev_info(dev, "Enabled VxLAN offloads for UDP port %d\n", | |
| be16_to_cpu(port)); | |
| return 0; | |
| } | |
| static void be_disable_vxlan_offloads(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) | |
| be_cmd_manage_iface(adapter, adapter->if_handle, | |
| OP_CONVERT_TUNNEL_TO_NORMAL); | |
| if (adapter->vxlan_port) | |
| be_cmd_set_vxlan_port(adapter, 0); | |
| adapter->flags &= ~BE_FLAGS_VXLAN_OFFLOADS; | |
| adapter->vxlan_port = 0; | |
| netdev->hw_enc_features = 0; | |
| netdev->hw_features &= ~(NETIF_F_GSO_UDP_TUNNEL); | |
| netdev->features &= ~(NETIF_F_GSO_UDP_TUNNEL); | |
| } | |
| static void be_calculate_vf_res(struct be_adapter *adapter, u16 num_vfs, | |
| struct be_resources *vft_res) | |
| { | |
| struct be_resources res = adapter->pool_res; | |
| u32 vf_if_cap_flags = res.vf_if_cap_flags; | |
| struct be_resources res_mod = {0}; | |
| u16 num_vf_qs = 1; | |
| /* Distribute the queue resources among the PF and it's VFs */ | |
| if (num_vfs) { | |
| /* Divide the rx queues evenly among the VFs and the PF, capped | |
| * at VF-EQ-count. Any remainder queues belong to the PF. | |
| */ | |
| num_vf_qs = min(SH_VF_MAX_NIC_EQS, | |
| res.max_rss_qs / (num_vfs + 1)); | |
| /* Skyhawk-R chip supports only MAX_PORT_RSS_TABLES | |
| * RSS Tables per port. Provide RSS on VFs, only if number of | |
| * VFs requested is less than it's PF Pool's RSS Tables limit. | |
| */ | |
| if (num_vfs >= be_max_pf_pool_rss_tables(adapter)) | |
| num_vf_qs = 1; | |
| } | |
| /* Resource with fields set to all '1's by GET_PROFILE_CONFIG cmd, | |
| * which are modifiable using SET_PROFILE_CONFIG cmd. | |
| */ | |
| be_cmd_get_profile_config(adapter, &res_mod, NULL, ACTIVE_PROFILE_TYPE, | |
| RESOURCE_MODIFIABLE, 0); | |
| /* If RSS IFACE capability flags are modifiable for a VF, set the | |
| * capability flag as valid and set RSS and DEFQ_RSS IFACE flags if | |
| * more than 1 RSSQ is available for a VF. | |
| * Otherwise, provision only 1 queue pair for VF. | |
| */ | |
| if (res_mod.vf_if_cap_flags & BE_IF_FLAGS_RSS) { | |
| vft_res->flags |= BIT(IF_CAPS_FLAGS_VALID_SHIFT); | |
| if (num_vf_qs > 1) { | |
| vf_if_cap_flags |= BE_IF_FLAGS_RSS; | |
| if (res.if_cap_flags & BE_IF_FLAGS_DEFQ_RSS) | |
| vf_if_cap_flags |= BE_IF_FLAGS_DEFQ_RSS; | |
| } else { | |
| vf_if_cap_flags &= ~(BE_IF_FLAGS_RSS | | |
| BE_IF_FLAGS_DEFQ_RSS); | |
| } | |
| } else { | |
| num_vf_qs = 1; | |
| } | |
| if (res_mod.vf_if_cap_flags & BE_IF_FLAGS_VLAN_PROMISCUOUS) { | |
| vft_res->flags |= BIT(IF_CAPS_FLAGS_VALID_SHIFT); | |
| vf_if_cap_flags &= ~BE_IF_FLAGS_VLAN_PROMISCUOUS; | |
| } | |
| vft_res->vf_if_cap_flags = vf_if_cap_flags; | |
| vft_res->max_rx_qs = num_vf_qs; | |
| vft_res->max_rss_qs = num_vf_qs; | |
| vft_res->max_tx_qs = res.max_tx_qs / (num_vfs + 1); | |
| vft_res->max_cq_count = res.max_cq_count / (num_vfs + 1); | |
| /* Distribute unicast MACs, VLANs, IFACE count and MCCQ count equally | |
| * among the PF and it's VFs, if the fields are changeable | |
| */ | |
| if (res_mod.max_uc_mac == FIELD_MODIFIABLE) | |
| vft_res->max_uc_mac = res.max_uc_mac / (num_vfs + 1); | |
| if (res_mod.max_vlans == FIELD_MODIFIABLE) | |
| vft_res->max_vlans = res.max_vlans / (num_vfs + 1); | |
| if (res_mod.max_iface_count == FIELD_MODIFIABLE) | |
| vft_res->max_iface_count = res.max_iface_count / (num_vfs + 1); | |
| if (res_mod.max_mcc_count == FIELD_MODIFIABLE) | |
| vft_res->max_mcc_count = res.max_mcc_count / (num_vfs + 1); | |
| } | |
| static void be_if_destroy(struct be_adapter *adapter) | |
| { | |
| be_cmd_if_destroy(adapter, adapter->if_handle, 0); | |
| kfree(adapter->pmac_id); | |
| adapter->pmac_id = NULL; | |
| kfree(adapter->mc_list); | |
| adapter->mc_list = NULL; | |
| kfree(adapter->uc_list); | |
| adapter->uc_list = NULL; | |
| } | |
| static int be_clear(struct be_adapter *adapter) | |
| { | |
| struct pci_dev *pdev = adapter->pdev; | |
| struct be_resources vft_res = {0}; | |
| be_cancel_worker(adapter); | |
| flush_workqueue(be_wq); | |
| if (sriov_enabled(adapter)) | |
| be_vf_clear(adapter); | |
| /* Re-configure FW to distribute resources evenly across max-supported | |
| * number of VFs, only when VFs are not already enabled. | |
| */ | |
| if (skyhawk_chip(adapter) && be_physfn(adapter) && | |
| !pci_vfs_assigned(pdev)) { | |
| be_calculate_vf_res(adapter, | |
| pci_sriov_get_totalvfs(pdev), | |
| &vft_res); | |
| be_cmd_set_sriov_config(adapter, adapter->pool_res, | |
| pci_sriov_get_totalvfs(pdev), | |
| &vft_res); | |
| } | |
| be_disable_vxlan_offloads(adapter); | |
| be_if_destroy(adapter); | |
| be_clear_queues(adapter); | |
| be_msix_disable(adapter); | |
| adapter->flags &= ~BE_FLAGS_SETUP_DONE; | |
| return 0; | |
| } | |
| static int be_vfs_if_create(struct be_adapter *adapter) | |
| { | |
| struct be_resources res = {0}; | |
| u32 cap_flags, en_flags, vf; | |
| struct be_vf_cfg *vf_cfg; | |
| int status; | |
| /* If a FW profile exists, then cap_flags are updated */ | |
| cap_flags = BE_VF_IF_EN_FLAGS; | |
| for_all_vfs(adapter, vf_cfg, vf) { | |
| if (!BE3_chip(adapter)) { | |
| status = be_cmd_get_profile_config(adapter, &res, NULL, | |
| ACTIVE_PROFILE_TYPE, | |
| RESOURCE_LIMITS, | |
| vf + 1); | |
| if (!status) { | |
| cap_flags = res.if_cap_flags; | |
| /* Prevent VFs from enabling VLAN promiscuous | |
| * mode | |
| */ | |
| cap_flags &= ~BE_IF_FLAGS_VLAN_PROMISCUOUS; | |
| } | |
| } | |
| /* PF should enable IF flags during proxy if_create call */ | |
| en_flags = cap_flags & BE_VF_IF_EN_FLAGS; | |
| status = be_cmd_if_create(adapter, cap_flags, en_flags, | |
| &vf_cfg->if_handle, vf + 1); | |
| if (status) | |
| return status; | |
| } | |
| return 0; | |
| } | |
| static int be_vf_setup_init(struct be_adapter *adapter) | |
| { | |
| struct be_vf_cfg *vf_cfg; | |
| int vf; | |
| adapter->vf_cfg = kcalloc(adapter->num_vfs, sizeof(*vf_cfg), | |
| GFP_KERNEL); | |
| if (!adapter->vf_cfg) | |
| return -ENOMEM; | |
| for_all_vfs(adapter, vf_cfg, vf) { | |
| vf_cfg->if_handle = -1; | |
| vf_cfg->pmac_id = -1; | |
| } | |
| return 0; | |
| } | |
| static int be_vf_setup(struct be_adapter *adapter) | |
| { | |
| struct device *dev = &adapter->pdev->dev; | |
| struct be_vf_cfg *vf_cfg; | |
| int status, old_vfs, vf; | |
| bool spoofchk; | |
| old_vfs = pci_num_vf(adapter->pdev); | |
| status = be_vf_setup_init(adapter); | |
| if (status) | |
| goto err; | |
| if (old_vfs) { | |
| for_all_vfs(adapter, vf_cfg, vf) { | |
| status = be_cmd_get_if_id(adapter, vf_cfg, vf); | |
| if (status) | |
| goto err; | |
| } | |
| status = be_vfs_mac_query(adapter); | |
| if (status) | |
| goto err; | |
| } else { | |
| status = be_vfs_if_create(adapter); | |
| if (status) | |
| goto err; | |
| status = be_vf_eth_addr_config(adapter); | |
| if (status) | |
| goto err; | |
| } | |
| for_all_vfs(adapter, vf_cfg, vf) { | |
| /* Allow VFs to programs MAC/VLAN filters */ | |
| status = be_cmd_get_fn_privileges(adapter, &vf_cfg->privileges, | |
| vf + 1); | |
| if (!status && !(vf_cfg->privileges & BE_PRIV_FILTMGMT)) { | |
| status = be_cmd_set_fn_privileges(adapter, | |
| vf_cfg->privileges | | |
| BE_PRIV_FILTMGMT, | |
| vf + 1); | |
| if (!status) { | |
| vf_cfg->privileges |= BE_PRIV_FILTMGMT; | |
| dev_info(dev, "VF%d has FILTMGMT privilege\n", | |
| vf); | |
| } | |
| } | |
| /* Allow full available bandwidth */ | |
| if (!old_vfs) | |
| be_cmd_config_qos(adapter, 0, 0, vf + 1); | |
| status = be_cmd_get_hsw_config(adapter, NULL, vf + 1, | |
| vf_cfg->if_handle, NULL, | |
| &spoofchk); | |
| if (!status) | |
| vf_cfg->spoofchk = spoofchk; | |
| if (!old_vfs) { | |
| be_cmd_enable_vf(adapter, vf + 1); | |
| be_cmd_set_logical_link_config(adapter, | |
| IFLA_VF_LINK_STATE_AUTO, | |
| vf+1); | |
| } | |
| } | |
| if (!old_vfs) { | |
| status = pci_enable_sriov(adapter->pdev, adapter->num_vfs); | |
| if (status) { | |
| dev_err(dev, "SRIOV enable failed\n"); | |
| adapter->num_vfs = 0; | |
| goto err; | |
| } | |
| } | |
| if (BE3_chip(adapter)) { | |
| /* On BE3, enable VEB only when SRIOV is enabled */ | |
| status = be_cmd_set_hsw_config(adapter, 0, 0, | |
| adapter->if_handle, | |
| PORT_FWD_TYPE_VEB, 0); | |
| if (status) | |
| goto err; | |
| } | |
| adapter->flags |= BE_FLAGS_SRIOV_ENABLED; | |
| return 0; | |
| err: | |
| dev_err(dev, "VF setup failed\n"); | |
| be_vf_clear(adapter); | |
| return status; | |
| } | |
| /* Converting function_mode bits on BE3 to SH mc_type enums */ | |
| static u8 be_convert_mc_type(u32 function_mode) | |
| { | |
| if (function_mode & VNIC_MODE && function_mode & QNQ_MODE) | |
| return vNIC1; | |
| else if (function_mode & QNQ_MODE) | |
| return FLEX10; | |
| else if (function_mode & VNIC_MODE) | |
| return vNIC2; | |
| else if (function_mode & UMC_ENABLED) | |
| return UMC; | |
| else | |
| return MC_NONE; | |
| } | |
| /* On BE2/BE3 FW does not suggest the supported limits */ | |
| static void BEx_get_resources(struct be_adapter *adapter, | |
| struct be_resources *res) | |
| { | |
| bool use_sriov = adapter->num_vfs ? 1 : 0; | |
| if (be_physfn(adapter)) | |
| res->max_uc_mac = BE_UC_PMAC_COUNT; | |
| else | |
| res->max_uc_mac = BE_VF_UC_PMAC_COUNT; | |
| adapter->mc_type = be_convert_mc_type(adapter->function_mode); | |
| if (be_is_mc(adapter)) { | |
| /* Assuming that there are 4 channels per port, | |
| * when multi-channel is enabled | |
| */ | |
| if (be_is_qnq_mode(adapter)) | |
| res->max_vlans = BE_NUM_VLANS_SUPPORTED/8; | |
| else | |
| /* In a non-qnq multichannel mode, the pvid | |
| * takes up one vlan entry | |
| */ | |
| res->max_vlans = (BE_NUM_VLANS_SUPPORTED / 4) - 1; | |
| } else { | |
| res->max_vlans = BE_NUM_VLANS_SUPPORTED; | |
| } | |
| res->max_mcast_mac = BE_MAX_MC; | |
| /* 1) For BE3 1Gb ports, FW does not support multiple TXQs | |
| * 2) Create multiple TX rings on a BE3-R multi-channel interface | |
| * *only* if it is RSS-capable. | |
| */ | |
| if (BE2_chip(adapter) || use_sriov || (adapter->port_num > 1) || | |
| be_virtfn(adapter) || | |
| (be_is_mc(adapter) && | |
| !(adapter->function_caps & BE_FUNCTION_CAPS_RSS))) { | |
| res->max_tx_qs = 1; | |
| } else if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) { | |
| struct be_resources super_nic_res = {0}; | |
| /* On a SuperNIC profile, the driver needs to use the | |
| * GET_PROFILE_CONFIG cmd to query the per-function TXQ limits | |
| */ | |
| be_cmd_get_profile_config(adapter, &super_nic_res, NULL, | |
| ACTIVE_PROFILE_TYPE, RESOURCE_LIMITS, | |
| 0); | |
| /* Some old versions of BE3 FW don't report max_tx_qs value */ | |
| res->max_tx_qs = super_nic_res.max_tx_qs ? : BE3_MAX_TX_QS; | |
| } else { | |
| res->max_tx_qs = BE3_MAX_TX_QS; | |
| } | |
| if ((adapter->function_caps & BE_FUNCTION_CAPS_RSS) && | |
| !use_sriov && be_physfn(adapter)) | |
| res->max_rss_qs = (adapter->be3_native) ? | |
| BE3_MAX_RSS_QS : BE2_MAX_RSS_QS; | |
| res->max_rx_qs = res->max_rss_qs + 1; | |
| if (be_physfn(adapter)) | |
| res->max_evt_qs = (be_max_vfs(adapter) > 0) ? | |
| BE3_SRIOV_MAX_EVT_QS : BE3_MAX_EVT_QS; | |
| else | |
| res->max_evt_qs = 1; | |
| res->if_cap_flags = BE_IF_CAP_FLAGS_WANT; | |
| res->if_cap_flags &= ~BE_IF_FLAGS_DEFQ_RSS; | |
| if (!(adapter->function_caps & BE_FUNCTION_CAPS_RSS)) | |
| res->if_cap_flags &= ~BE_IF_FLAGS_RSS; | |
| } | |
| static void be_setup_init(struct be_adapter *adapter) | |
| { | |
| adapter->vlan_prio_bmap = 0xff; | |
| adapter->phy.link_speed = -1; | |
| adapter->if_handle = -1; | |
| adapter->be3_native = false; | |
| adapter->if_flags = 0; | |
| adapter->phy_state = BE_UNKNOWN_PHY_STATE; | |
| if (be_physfn(adapter)) | |
| adapter->cmd_privileges = MAX_PRIVILEGES; | |
| else | |
| adapter->cmd_privileges = MIN_PRIVILEGES; | |
| } | |
| /* HW supports only MAX_PORT_RSS_TABLES RSS Policy Tables per port. | |
| * However, this HW limitation is not exposed to the host via any SLI cmd. | |
| * As a result, in the case of SRIOV and in particular multi-partition configs | |
| * the driver needs to calcuate a proportional share of RSS Tables per PF-pool | |
| * for distribution between the VFs. This self-imposed limit will determine the | |
| * no: of VFs for which RSS can be enabled. | |
| */ | |
| static void be_calculate_pf_pool_rss_tables(struct be_adapter *adapter) | |
| { | |
| struct be_port_resources port_res = {0}; | |
| u8 rss_tables_on_port; | |
| u16 max_vfs = be_max_vfs(adapter); | |
| be_cmd_get_profile_config(adapter, NULL, &port_res, SAVED_PROFILE_TYPE, | |
| RESOURCE_LIMITS, 0); | |
| rss_tables_on_port = MAX_PORT_RSS_TABLES - port_res.nic_pfs; | |
| /* Each PF Pool's RSS Tables limit = | |
| * PF's Max VFs / Total_Max_VFs on Port * RSS Tables on Port | |
| */ | |
| adapter->pool_res.max_rss_tables = | |
| max_vfs * rss_tables_on_port / port_res.max_vfs; | |
| } | |
| static int be_get_sriov_config(struct be_adapter *adapter) | |
| { | |
| struct be_resources res = {0}; | |
| int max_vfs, old_vfs; | |
| be_cmd_get_profile_config(adapter, &res, NULL, ACTIVE_PROFILE_TYPE, | |
| RESOURCE_LIMITS, 0); | |
| /* Some old versions of BE3 FW don't report max_vfs value */ | |
| if (BE3_chip(adapter) && !res.max_vfs) { | |
| max_vfs = pci_sriov_get_totalvfs(adapter->pdev); | |
| res.max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0; | |
| } | |
| adapter->pool_res = res; | |
| /* If during previous unload of the driver, the VFs were not disabled, | |
| * then we cannot rely on the PF POOL limits for the TotalVFs value. | |
| * Instead use the TotalVFs value stored in the pci-dev struct. | |
| */ | |
| old_vfs = pci_num_vf(adapter->pdev); | |
| if (old_vfs) { | |
| dev_info(&adapter->pdev->dev, "%d VFs are already enabled\n", | |
| old_vfs); | |
| adapter->pool_res.max_vfs = | |
| pci_sriov_get_totalvfs(adapter->pdev); | |
| adapter->num_vfs = old_vfs; | |
| } | |
| if (skyhawk_chip(adapter) && be_max_vfs(adapter) && !old_vfs) { | |
| be_calculate_pf_pool_rss_tables(adapter); | |
| dev_info(&adapter->pdev->dev, | |
| "RSS can be enabled for all VFs if num_vfs <= %d\n", | |
| be_max_pf_pool_rss_tables(adapter)); | |
| } | |
| return 0; | |
| } | |
| static void be_alloc_sriov_res(struct be_adapter *adapter) | |
| { | |
| int old_vfs = pci_num_vf(adapter->pdev); | |
| struct be_resources vft_res = {0}; | |
| int status; | |
| be_get_sriov_config(adapter); | |
| if (!old_vfs) | |
| pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter)); | |
| /* When the HW is in SRIOV capable configuration, the PF-pool | |
| * resources are given to PF during driver load, if there are no | |
| * old VFs. This facility is not available in BE3 FW. | |
| * Also, this is done by FW in Lancer chip. | |
| */ | |
| if (skyhawk_chip(adapter) && be_max_vfs(adapter) && !old_vfs) { | |
| be_calculate_vf_res(adapter, 0, &vft_res); | |
| status = be_cmd_set_sriov_config(adapter, adapter->pool_res, 0, | |
| &vft_res); | |
| if (status) | |
| dev_err(&adapter->pdev->dev, | |
| "Failed to optimize SRIOV resources\n"); | |
| } | |
| } | |
| static int be_get_resources(struct be_adapter *adapter) | |
| { | |
| struct device *dev = &adapter->pdev->dev; | |
| struct be_resources res = {0}; | |
| int status; | |
| /* For Lancer, SH etc read per-function resource limits from FW. | |
| * GET_FUNC_CONFIG returns per function guaranteed limits. | |
| * GET_PROFILE_CONFIG returns PCI-E related limits PF-pool limits | |
| */ | |
| if (BEx_chip(adapter)) { | |
| BEx_get_resources(adapter, &res); | |
| } else { | |
| status = be_cmd_get_func_config(adapter, &res); | |
| if (status) | |
| return status; | |
| /* If a deafault RXQ must be created, we'll use up one RSSQ*/ | |
| if (res.max_rss_qs && res.max_rss_qs == res.max_rx_qs && | |
| !(res.if_cap_flags & BE_IF_FLAGS_DEFQ_RSS)) | |
| res.max_rss_qs -= 1; | |
| } | |
| /* If RoCE is supported stash away half the EQs for RoCE */ | |
| res.max_nic_evt_qs = be_roce_supported(adapter) ? | |
| res.max_evt_qs / 2 : res.max_evt_qs; | |
| adapter->res = res; | |
| /* If FW supports RSS default queue, then skip creating non-RSS | |
| * queue for non-IP traffic. | |
| */ | |
| adapter->need_def_rxq = (be_if_cap_flags(adapter) & | |
| BE_IF_FLAGS_DEFQ_RSS) ? 0 : 1; | |
| dev_info(dev, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n", | |
| be_max_txqs(adapter), be_max_rxqs(adapter), | |
| be_max_rss(adapter), be_max_nic_eqs(adapter), | |
| be_max_vfs(adapter)); | |
| dev_info(dev, "Max: uc-macs %d, mc-macs %d, vlans %d\n", | |
| be_max_uc(adapter), be_max_mc(adapter), | |
| be_max_vlans(adapter)); | |
| /* Ensure RX and TX queues are created in pairs at init time */ | |
| adapter->cfg_num_rx_irqs = | |
| min_t(u16, netif_get_num_default_rss_queues(), | |
| be_max_qp_irqs(adapter)); | |
| adapter->cfg_num_tx_irqs = adapter->cfg_num_rx_irqs; | |
| return 0; | |
| } | |
| static int be_get_config(struct be_adapter *adapter) | |
| { | |
| int status, level; | |
| u16 profile_id; | |
| status = be_cmd_get_cntl_attributes(adapter); | |
| if (status) | |
| return status; | |
| status = be_cmd_query_fw_cfg(adapter); | |
| if (status) | |
| return status; | |
| if (!lancer_chip(adapter) && be_physfn(adapter)) | |
| be_cmd_get_fat_dump_len(adapter, &adapter->fat_dump_len); | |
| if (BEx_chip(adapter)) { | |
| level = be_cmd_get_fw_log_level(adapter); | |
| adapter->msg_enable = | |
| level <= FW_LOG_LEVEL_DEFAULT ? NETIF_MSG_HW : 0; | |
| } | |
| be_cmd_get_acpi_wol_cap(adapter); | |
| pci_enable_wake(adapter->pdev, PCI_D3hot, adapter->wol_en); | |
| pci_enable_wake(adapter->pdev, PCI_D3cold, adapter->wol_en); | |
| be_cmd_query_port_name(adapter); | |
| if (be_physfn(adapter)) { | |
| status = be_cmd_get_active_profile(adapter, &profile_id); | |
| if (!status) | |
| dev_info(&adapter->pdev->dev, | |
| "Using profile 0x%x\n", profile_id); | |
| } | |
| return 0; | |
| } | |
| static int be_mac_setup(struct be_adapter *adapter) | |
| { | |
| u8 mac[ETH_ALEN]; | |
| int status; | |
| if (is_zero_ether_addr(adapter->netdev->dev_addr)) { | |
| status = be_cmd_get_perm_mac(adapter, mac); | |
| if (status) | |
| return status; | |
| memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN); | |
| memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN); | |
| /* Initial MAC for BE3 VFs is already programmed by PF */ | |
| if (BEx_chip(adapter) && be_virtfn(adapter)) | |
| memcpy(adapter->dev_mac, mac, ETH_ALEN); | |
| } | |
| return 0; | |
| } | |
| static void be_schedule_worker(struct be_adapter *adapter) | |
| { | |
| queue_delayed_work(be_wq, &adapter->work, msecs_to_jiffies(1000)); | |
| adapter->flags |= BE_FLAGS_WORKER_SCHEDULED; | |
| } | |
| static void be_destroy_err_recovery_workq(void) | |
| { | |
| if (!be_err_recovery_workq) | |
| return; | |
| flush_workqueue(be_err_recovery_workq); | |
| destroy_workqueue(be_err_recovery_workq); | |
| be_err_recovery_workq = NULL; | |
| } | |
| static void be_schedule_err_detection(struct be_adapter *adapter, u32 delay) | |
| { | |
| struct be_error_recovery *err_rec = &adapter->error_recovery; | |
| if (!be_err_recovery_workq) | |
| return; | |
| queue_delayed_work(be_err_recovery_workq, &err_rec->err_detection_work, | |
| msecs_to_jiffies(delay)); | |
| adapter->flags |= BE_FLAGS_ERR_DETECTION_SCHEDULED; | |
| } | |
| static int be_setup_queues(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| int status; | |
| status = be_evt_queues_create(adapter); | |
| if (status) | |
| goto err; | |
| status = be_tx_qs_create(adapter); | |
| if (status) | |
| goto err; | |
| status = be_rx_cqs_create(adapter); | |
| if (status) | |
| goto err; | |
| status = be_mcc_queues_create(adapter); | |
| if (status) | |
| goto err; | |
| status = netif_set_real_num_rx_queues(netdev, adapter->num_rx_qs); | |
| if (status) | |
| goto err; | |
| status = netif_set_real_num_tx_queues(netdev, adapter->num_tx_qs); | |
| if (status) | |
| goto err; | |
| return 0; | |
| err: | |
| dev_err(&adapter->pdev->dev, "queue_setup failed\n"); | |
| return status; | |
| } | |
| static int be_if_create(struct be_adapter *adapter) | |
| { | |
| u32 en_flags = BE_IF_FLAGS_RSS | BE_IF_FLAGS_DEFQ_RSS; | |
| u32 cap_flags = be_if_cap_flags(adapter); | |
| int status; | |
| /* alloc required memory for other filtering fields */ | |
| adapter->pmac_id = kcalloc(be_max_uc(adapter), | |
| sizeof(*adapter->pmac_id), GFP_KERNEL); | |
| if (!adapter->pmac_id) | |
| return -ENOMEM; | |
| adapter->mc_list = kcalloc(be_max_mc(adapter), | |
| sizeof(*adapter->mc_list), GFP_KERNEL); | |
| if (!adapter->mc_list) | |
| return -ENOMEM; | |
| adapter->uc_list = kcalloc(be_max_uc(adapter), | |
| sizeof(*adapter->uc_list), GFP_KERNEL); | |
| if (!adapter->uc_list) | |
| return -ENOMEM; | |
| if (adapter->cfg_num_rx_irqs == 1) | |
| cap_flags &= ~(BE_IF_FLAGS_DEFQ_RSS | BE_IF_FLAGS_RSS); | |
| en_flags &= cap_flags; | |
| /* will enable all the needed filter flags in be_open() */ | |
| status = be_cmd_if_create(adapter, be_if_cap_flags(adapter), en_flags, | |
| &adapter->if_handle, 0); | |
| if (status) | |
| return status; | |
| return 0; | |
| } | |
| int be_update_queues(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| int status; | |
| if (netif_running(netdev)) | |
| be_close(netdev); | |
| be_cancel_worker(adapter); | |
| /* If any vectors have been shared with RoCE we cannot re-program | |
| * the MSIx table. | |
| */ | |
| if (!adapter->num_msix_roce_vec) | |
| be_msix_disable(adapter); | |
| be_clear_queues(adapter); | |
| status = be_cmd_if_destroy(adapter, adapter->if_handle, 0); | |
| if (status) | |
| return status; | |
| if (!msix_enabled(adapter)) { | |
| status = be_msix_enable(adapter); | |
| if (status) | |
| return status; | |
| } | |
| status = be_if_create(adapter); | |
| if (status) | |
| return status; | |
| status = be_setup_queues(adapter); | |
| if (status) | |
| return status; | |
| be_schedule_worker(adapter); | |
| /* | |
| * The IF was destroyed and re-created. We need to clear | |
| * all promiscuous flags valid for the destroyed IF. | |
| * Without this promisc mode is not restored during | |
| * be_open() because the driver thinks that it is | |
| * already enabled in HW. | |
| */ | |
| adapter->if_flags &= ~BE_IF_FLAGS_ALL_PROMISCUOUS; | |
| if (netif_running(netdev)) | |
| status = be_open(netdev); | |
| return status; | |
| } | |
| static inline int fw_major_num(const char *fw_ver) | |
| { | |
| int fw_major = 0, i; | |
| i = sscanf(fw_ver, "%d.", &fw_major); | |
| if (i != 1) | |
| return 0; | |
| return fw_major; | |
| } | |
| /* If it is error recovery, FLR the PF | |
| * Else if any VFs are already enabled don't FLR the PF | |
| */ | |
| static bool be_reset_required(struct be_adapter *adapter) | |
| { | |
| if (be_error_recovering(adapter)) | |
| return true; | |
| else | |
| return pci_num_vf(adapter->pdev) == 0; | |
| } | |
| /* Wait for the FW to be ready and perform the required initialization */ | |
| static int be_func_init(struct be_adapter *adapter) | |
| { | |
| int status; | |
| status = be_fw_wait_ready(adapter); | |
| if (status) | |
| return status; | |
| /* FW is now ready; clear errors to allow cmds/doorbell */ | |
| be_clear_error(adapter, BE_CLEAR_ALL); | |
| if (be_reset_required(adapter)) { | |
| status = be_cmd_reset_function(adapter); | |
| if (status) | |
| return status; | |
| /* Wait for interrupts to quiesce after an FLR */ | |
| msleep(100); | |
| } | |
| /* Tell FW we're ready to fire cmds */ | |
| status = be_cmd_fw_init(adapter); | |
| if (status) | |
| return status; | |
| /* Allow interrupts for other ULPs running on NIC function */ | |
| be_intr_set(adapter, true); | |
| return 0; | |
| } | |
| static int be_setup(struct be_adapter *adapter) | |
| { | |
| struct device *dev = &adapter->pdev->dev; | |
| int status; | |
| status = be_func_init(adapter); | |
| if (status) | |
| return status; | |
| be_setup_init(adapter); | |
| if (!lancer_chip(adapter)) | |
| be_cmd_req_native_mode(adapter); | |
| /* invoke this cmd first to get pf_num and vf_num which are needed | |
| * for issuing profile related cmds | |
| */ | |
| if (!BEx_chip(adapter)) { | |
| status = be_cmd_get_func_config(adapter, NULL); | |
| if (status) | |
| return status; | |
| } | |
| status = be_get_config(adapter); | |
| if (status) | |
| goto err; | |
| if (!BE2_chip(adapter) && be_physfn(adapter)) | |
| be_alloc_sriov_res(adapter); | |
| status = be_get_resources(adapter); | |
| if (status) | |
| goto err; | |
| status = be_msix_enable(adapter); | |
| if (status) | |
| goto err; | |
| /* will enable all the needed filter flags in be_open() */ | |
| status = be_if_create(adapter); | |
| if (status) | |
| goto err; | |
| /* Updating real_num_tx/rx_queues() requires rtnl_lock() */ | |
| rtnl_lock(); | |
| status = be_setup_queues(adapter); | |
| rtnl_unlock(); | |
| if (status) | |
| goto err; | |
| be_cmd_get_fn_privileges(adapter, &adapter->cmd_privileges, 0); | |
| status = be_mac_setup(adapter); | |
| if (status) | |
| goto err; | |
| be_cmd_get_fw_ver(adapter); | |
| dev_info(dev, "FW version is %s\n", adapter->fw_ver); | |
| if (BE2_chip(adapter) && fw_major_num(adapter->fw_ver) < 4) { | |
| dev_err(dev, "Firmware on card is old(%s), IRQs may not work", | |
| adapter->fw_ver); | |
| dev_err(dev, "Please upgrade firmware to version >= 4.0\n"); | |
| } | |
| status = be_cmd_set_flow_control(adapter, adapter->tx_fc, | |
| adapter->rx_fc); | |
| if (status) | |
| be_cmd_get_flow_control(adapter, &adapter->tx_fc, | |
| &adapter->rx_fc); | |
| dev_info(&adapter->pdev->dev, "HW Flow control - TX:%d RX:%d\n", | |
| adapter->tx_fc, adapter->rx_fc); | |
| if (be_physfn(adapter)) | |
| be_cmd_set_logical_link_config(adapter, | |
| IFLA_VF_LINK_STATE_AUTO, 0); | |
| /* BE3 EVB echoes broadcast/multicast packets back to PF's vport | |
| * confusing a linux bridge or OVS that it might be connected to. | |
| * Set the EVB to PASSTHRU mode which effectively disables the EVB | |
| * when SRIOV is not enabled. | |
| */ | |
| if (BE3_chip(adapter)) | |
| be_cmd_set_hsw_config(adapter, 0, 0, adapter->if_handle, | |
| PORT_FWD_TYPE_PASSTHRU, 0); | |
| if (adapter->num_vfs) | |
| be_vf_setup(adapter); | |
| status = be_cmd_get_phy_info(adapter); | |
| if (!status && be_pause_supported(adapter)) | |
| adapter->phy.fc_autoneg = 1; | |
| if (be_physfn(adapter) && !lancer_chip(adapter)) | |
| be_cmd_set_features(adapter); | |
| be_schedule_worker(adapter); | |
| adapter->flags |= BE_FLAGS_SETUP_DONE; | |
| return 0; | |
| err: | |
| be_clear(adapter); | |
| return status; | |
| } | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| static void be_netpoll(struct net_device *netdev) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct be_eq_obj *eqo; | |
| int i; | |
| for_all_evt_queues(adapter, eqo, i) { | |
| be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0, 0); | |
| napi_schedule(&eqo->napi); | |
| } | |
| } | |
| #endif | |
| int be_load_fw(struct be_adapter *adapter, u8 *fw_file) | |
| { | |
| const struct firmware *fw; | |
| int status; | |
| if (!netif_running(adapter->netdev)) { | |
| dev_err(&adapter->pdev->dev, | |
| "Firmware load not allowed (interface is down)\n"); | |
| return -ENETDOWN; | |
| } | |
| status = request_firmware(&fw, fw_file, &adapter->pdev->dev); | |
| if (status) | |
| goto fw_exit; | |
| dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file); | |
| if (lancer_chip(adapter)) | |
| status = lancer_fw_download(adapter, fw); | |
| else | |
| status = be_fw_download(adapter, fw); | |
| if (!status) | |
| be_cmd_get_fw_ver(adapter); | |
| fw_exit: | |
| release_firmware(fw); | |
| return status; | |
| } | |
| static int be_ndo_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh, | |
| u16 flags) | |
| { | |
| struct be_adapter *adapter = netdev_priv(dev); | |
| struct nlattr *attr, *br_spec; | |
| int rem; | |
| int status = 0; | |
| u16 mode = 0; | |
| if (!sriov_enabled(adapter)) | |
| return -EOPNOTSUPP; | |
| br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); | |
| if (!br_spec) | |
| return -EINVAL; | |
| nla_for_each_nested(attr, br_spec, rem) { | |
| if (nla_type(attr) != IFLA_BRIDGE_MODE) | |
| continue; | |
| if (nla_len(attr) < sizeof(mode)) | |
| return -EINVAL; | |
| mode = nla_get_u16(attr); | |
| if (BE3_chip(adapter) && mode == BRIDGE_MODE_VEPA) | |
| return -EOPNOTSUPP; | |
| if (mode != BRIDGE_MODE_VEPA && mode != BRIDGE_MODE_VEB) | |
| return -EINVAL; | |
| status = be_cmd_set_hsw_config(adapter, 0, 0, | |
| adapter->if_handle, | |
| mode == BRIDGE_MODE_VEPA ? | |
| PORT_FWD_TYPE_VEPA : | |
| PORT_FWD_TYPE_VEB, 0); | |
| if (status) | |
| goto err; | |
| dev_info(&adapter->pdev->dev, "enabled switch mode: %s\n", | |
| mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); | |
| return status; | |
| } | |
| err: | |
| dev_err(&adapter->pdev->dev, "Failed to set switch mode %s\n", | |
| mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); | |
| return status; | |
| } | |
| static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, | |
| struct net_device *dev, u32 filter_mask, | |
| int nlflags) | |
| { | |
| struct be_adapter *adapter = netdev_priv(dev); | |
| int status = 0; | |
| u8 hsw_mode; | |
| /* BE and Lancer chips support VEB mode only */ | |
| if (BEx_chip(adapter) || lancer_chip(adapter)) { | |
| /* VEB is disabled in non-SR-IOV profiles on BE3/Lancer */ | |
| if (!pci_sriov_get_totalvfs(adapter->pdev)) | |
| return 0; | |
| hsw_mode = PORT_FWD_TYPE_VEB; | |
| } else { | |
| status = be_cmd_get_hsw_config(adapter, NULL, 0, | |
| adapter->if_handle, &hsw_mode, | |
| NULL); | |
| if (status) | |
| return 0; | |
| if (hsw_mode == PORT_FWD_TYPE_PASSTHRU) | |
| return 0; | |
| } | |
| return ndo_dflt_bridge_getlink(skb, pid, seq, dev, | |
| hsw_mode == PORT_FWD_TYPE_VEPA ? | |
| BRIDGE_MODE_VEPA : BRIDGE_MODE_VEB, | |
| 0, 0, nlflags, filter_mask, NULL); | |
| } | |
| static struct be_cmd_work *be_alloc_work(struct be_adapter *adapter, | |
| void (*func)(struct work_struct *)) | |
| { | |
| struct be_cmd_work *work; | |
| work = kzalloc(sizeof(*work), GFP_ATOMIC); | |
| if (!work) { | |
| dev_err(&adapter->pdev->dev, | |
| "be_work memory allocation failed\n"); | |
| return NULL; | |
| } | |
| INIT_WORK(&work->work, func); | |
| work->adapter = adapter; | |
| return work; | |
| } | |
| /* VxLAN offload Notes: | |
| * | |
| * The stack defines tunnel offload flags (hw_enc_features) for IP and doesn't | |
| * distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload | |
| * is expected to work across all types of IP tunnels once exported. Skyhawk | |
| * supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN | |
| * offloads in hw_enc_features only when a VxLAN port is added. If other (non | |
| * VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for | |
| * those other tunnels are unexported on the fly through ndo_features_check(). | |
| * | |
| * Skyhawk supports VxLAN offloads only for one UDP dport. So, if the stack | |
| * adds more than one port, disable offloads and re-enable them again when | |
| * there's only one port left. We maintain a list of ports for this purpose. | |
| */ | |
| static void be_work_add_vxlan_port(struct work_struct *work) | |
| { | |
| struct be_cmd_work *cmd_work = | |
| container_of(work, struct be_cmd_work, work); | |
| struct be_adapter *adapter = cmd_work->adapter; | |
| struct device *dev = &adapter->pdev->dev; | |
| __be16 port = cmd_work->info.vxlan_port; | |
| struct be_vxlan_port *vxlan_port; | |
| int status; | |
| /* Bump up the alias count if it is an existing port */ | |
| list_for_each_entry(vxlan_port, &adapter->vxlan_port_list, list) { | |
| if (vxlan_port->port == port) { | |
| vxlan_port->port_aliases++; | |
| goto done; | |
| } | |
| } | |
| /* Add a new port to our list. We don't need a lock here since port | |
| * add/delete are done only in the context of a single-threaded work | |
| * queue (be_wq). | |
| */ | |
| vxlan_port = kzalloc(sizeof(*vxlan_port), GFP_KERNEL); | |
| if (!vxlan_port) | |
| goto done; | |
| vxlan_port->port = port; | |
| INIT_LIST_HEAD(&vxlan_port->list); | |
| list_add_tail(&vxlan_port->list, &adapter->vxlan_port_list); | |
| adapter->vxlan_port_count++; | |
| if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) { | |
| dev_info(dev, | |
| "Only one UDP port supported for VxLAN offloads\n"); | |
| dev_info(dev, "Disabling VxLAN offloads\n"); | |
| goto err; | |
| } | |
| if (adapter->vxlan_port_count > 1) | |
| goto done; | |
| status = be_enable_vxlan_offloads(adapter); | |
| if (!status) | |
| goto done; | |
| err: | |
| be_disable_vxlan_offloads(adapter); | |
| done: | |
| kfree(cmd_work); | |
| return; | |
| } | |
| static void be_work_del_vxlan_port(struct work_struct *work) | |
| { | |
| struct be_cmd_work *cmd_work = | |
| container_of(work, struct be_cmd_work, work); | |
| struct be_adapter *adapter = cmd_work->adapter; | |
| __be16 port = cmd_work->info.vxlan_port; | |
| struct be_vxlan_port *vxlan_port; | |
| /* Nothing to be done if a port alias is being deleted */ | |
| list_for_each_entry(vxlan_port, &adapter->vxlan_port_list, list) { | |
| if (vxlan_port->port == port) { | |
| if (vxlan_port->port_aliases) { | |
| vxlan_port->port_aliases--; | |
| goto done; | |
| } | |
| break; | |
| } | |
| } | |
| /* No port aliases left; delete the port from the list */ | |
| list_del(&vxlan_port->list); | |
| adapter->vxlan_port_count--; | |
| /* Disable VxLAN offload if this is the offloaded port */ | |
| if (adapter->vxlan_port == vxlan_port->port) { | |
| WARN_ON(adapter->vxlan_port_count); | |
| be_disable_vxlan_offloads(adapter); | |
| dev_info(&adapter->pdev->dev, | |
| "Disabled VxLAN offloads for UDP port %d\n", | |
| be16_to_cpu(port)); | |
| goto out; | |
| } | |
| /* If only 1 port is left, re-enable VxLAN offload */ | |
| if (adapter->vxlan_port_count == 1) | |
| be_enable_vxlan_offloads(adapter); | |
| out: | |
| kfree(vxlan_port); | |
| done: | |
| kfree(cmd_work); | |
| } | |
| static void be_cfg_vxlan_port(struct net_device *netdev, | |
| struct udp_tunnel_info *ti, | |
| void (*func)(struct work_struct *)) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| struct be_cmd_work *cmd_work; | |
| if (ti->type != UDP_TUNNEL_TYPE_VXLAN) | |
| return; | |
| if (lancer_chip(adapter) || BEx_chip(adapter) || be_is_mc(adapter)) | |
| return; | |
| cmd_work = be_alloc_work(adapter, func); | |
| if (cmd_work) { | |
| cmd_work->info.vxlan_port = ti->port; | |
| queue_work(be_wq, &cmd_work->work); | |
| } | |
| } | |
| static void be_del_vxlan_port(struct net_device *netdev, | |
| struct udp_tunnel_info *ti) | |
| { | |
| be_cfg_vxlan_port(netdev, ti, be_work_del_vxlan_port); | |
| } | |
| static void be_add_vxlan_port(struct net_device *netdev, | |
| struct udp_tunnel_info *ti) | |
| { | |
| be_cfg_vxlan_port(netdev, ti, be_work_add_vxlan_port); | |
| } | |
| static netdev_features_t be_features_check(struct sk_buff *skb, | |
| struct net_device *dev, | |
| netdev_features_t features) | |
| { | |
| struct be_adapter *adapter = netdev_priv(dev); | |
| u8 l4_hdr = 0; | |
| if (skb_is_gso(skb)) { | |
| /* IPv6 TSO requests with extension hdrs are a problem | |
| * to Lancer and BE3 HW. Disable TSO6 feature. | |
| */ | |
| if (!skyhawk_chip(adapter) && is_ipv6_ext_hdr(skb)) | |
| features &= ~NETIF_F_TSO6; | |
| /* Lancer cannot handle the packet with MSS less than 256. | |
| * Disable the GSO support in such cases | |
| */ | |
| if (lancer_chip(adapter) && skb_shinfo(skb)->gso_size < 256) | |
| features &= ~NETIF_F_GSO_MASK; | |
| } | |
| /* The code below restricts offload features for some tunneled and | |
| * Q-in-Q packets. | |
| * Offload features for normal (non tunnel) packets are unchanged. | |
| */ | |
| features = vlan_features_check(skb, features); | |
| if (!skb->encapsulation || | |
| !(adapter->flags & BE_FLAGS_VXLAN_OFFLOADS)) | |
| return features; | |
| /* It's an encapsulated packet and VxLAN offloads are enabled. We | |
| * should disable tunnel offload features if it's not a VxLAN packet, | |
| * as tunnel offloads have been enabled only for VxLAN. This is done to | |
| * allow other tunneled traffic like GRE work fine while VxLAN | |
| * offloads are configured in Skyhawk-R. | |
| */ | |
| switch (vlan_get_protocol(skb)) { | |
| case htons(ETH_P_IP): | |
| l4_hdr = ip_hdr(skb)->protocol; | |
| break; | |
| case htons(ETH_P_IPV6): | |
| l4_hdr = ipv6_hdr(skb)->nexthdr; | |
| break; | |
| default: | |
| return features; | |
| } | |
| if (l4_hdr != IPPROTO_UDP || | |
| skb->inner_protocol_type != ENCAP_TYPE_ETHER || | |
| skb->inner_protocol != htons(ETH_P_TEB) || | |
| skb_inner_mac_header(skb) - skb_transport_header(skb) != | |
| sizeof(struct udphdr) + sizeof(struct vxlanhdr) || | |
| !adapter->vxlan_port || | |
| udp_hdr(skb)->dest != adapter->vxlan_port) | |
| return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); | |
| return features; | |
| } | |
| static int be_get_phys_port_id(struct net_device *dev, | |
| struct netdev_phys_item_id *ppid) | |
| { | |
| int i, id_len = CNTL_SERIAL_NUM_WORDS * CNTL_SERIAL_NUM_WORD_SZ + 1; | |
| struct be_adapter *adapter = netdev_priv(dev); | |
| u8 *id; | |
| if (MAX_PHYS_ITEM_ID_LEN < id_len) | |
| return -ENOSPC; | |
| ppid->id[0] = adapter->hba_port_num + 1; | |
| id = &ppid->id[1]; | |
| for (i = CNTL_SERIAL_NUM_WORDS - 1; i >= 0; | |
| i--, id += CNTL_SERIAL_NUM_WORD_SZ) | |
| memcpy(id, &adapter->serial_num[i], CNTL_SERIAL_NUM_WORD_SZ); | |
| ppid->id_len = id_len; | |
| return 0; | |
| } | |
| static void be_set_rx_mode(struct net_device *dev) | |
| { | |
| struct be_adapter *adapter = netdev_priv(dev); | |
| struct be_cmd_work *work; | |
| work = be_alloc_work(adapter, be_work_set_rx_mode); | |
| if (work) | |
| queue_work(be_wq, &work->work); | |
| } | |
| static const struct net_device_ops be_netdev_ops = { | |
| .ndo_open = be_open, | |
| .ndo_stop = be_close, | |
| .ndo_start_xmit = be_xmit, | |
| .ndo_set_rx_mode = be_set_rx_mode, | |
| .ndo_set_mac_address = be_mac_addr_set, | |
| .ndo_get_stats64 = be_get_stats64, | |
| .ndo_validate_addr = eth_validate_addr, | |
| .ndo_vlan_rx_add_vid = be_vlan_add_vid, | |
| .ndo_vlan_rx_kill_vid = be_vlan_rem_vid, | |
| .ndo_set_vf_mac = be_set_vf_mac, | |
| .ndo_set_vf_vlan = be_set_vf_vlan, | |
| .ndo_set_vf_rate = be_set_vf_tx_rate, | |
| .ndo_get_vf_config = be_get_vf_config, | |
| .ndo_set_vf_link_state = be_set_vf_link_state, | |
| .ndo_set_vf_spoofchk = be_set_vf_spoofchk, | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| .ndo_poll_controller = be_netpoll, | |
| #endif | |
| .ndo_bridge_setlink = be_ndo_bridge_setlink, | |
| .ndo_bridge_getlink = be_ndo_bridge_getlink, | |
| .ndo_udp_tunnel_add = be_add_vxlan_port, | |
| .ndo_udp_tunnel_del = be_del_vxlan_port, | |
| .ndo_features_check = be_features_check, | |
| .ndo_get_phys_port_id = be_get_phys_port_id, | |
| }; | |
| static void be_netdev_init(struct net_device *netdev) | |
| { | |
| struct be_adapter *adapter = netdev_priv(netdev); | |
| netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | | |
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM | | |
| NETIF_F_HW_VLAN_CTAG_TX; | |
| if ((be_if_cap_flags(adapter) & BE_IF_FLAGS_RSS)) | |
| netdev->hw_features |= NETIF_F_RXHASH; | |
| netdev->features |= netdev->hw_features | | |
| NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER; | |
| netdev->vlan_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | | |
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; | |
| netdev->priv_flags |= IFF_UNICAST_FLT; | |
| netdev->flags |= IFF_MULTICAST; | |
| netif_set_gso_max_size(netdev, BE_MAX_GSO_SIZE - ETH_HLEN); | |
| netdev->netdev_ops = &be_netdev_ops; | |
| netdev->ethtool_ops = &be_ethtool_ops; | |
| /* MTU range: 256 - 9000 */ | |
| netdev->min_mtu = BE_MIN_MTU; | |
| netdev->max_mtu = BE_MAX_MTU; | |
| } | |
| static void be_cleanup(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| rtnl_lock(); | |
| netif_device_detach(netdev); | |
| if (netif_running(netdev)) | |
| be_close(netdev); | |
| rtnl_unlock(); | |
| be_clear(adapter); | |
| } | |
| static int be_resume(struct be_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| int status; | |
| status = be_setup(adapter); | |
| if (status) | |
| return status; | |
| rtnl_lock(); | |
| if (netif_running(netdev)) | |
| status = be_open(netdev); | |
| rtnl_unlock(); | |
| if (status) | |
| return status; | |
| netif_device_attach(netdev); | |
| return 0; | |
| } | |
| static void be_soft_reset(struct be_adapter *adapter) | |
| { | |
| u32 val; | |
| dev_info(&adapter->pdev->dev, "Initiating chip soft reset\n"); | |
| val = ioread32(adapter->pcicfg + SLIPORT_SOFTRESET_OFFSET); | |
| val |= SLIPORT_SOFTRESET_SR_MASK; | |
| iowrite32(val, adapter->pcicfg + SLIPORT_SOFTRESET_OFFSET); | |
| } | |
| static bool be_err_is_recoverable(struct be_adapter *adapter) | |
| { | |
| struct be_error_recovery *err_rec = &adapter->error_recovery; | |
| unsigned long initial_idle_time = | |
| msecs_to_jiffies(ERR_RECOVERY_IDLE_TIME); | |
| unsigned long recovery_interval = | |
| msecs_to_jiffies(ERR_RECOVERY_INTERVAL); | |
| u16 ue_err_code; | |
| u32 val; | |
| val = be_POST_stage_get(adapter); | |
| if ((val & POST_STAGE_RECOVERABLE_ERR) != POST_STAGE_RECOVERABLE_ERR) | |
| return false; | |
| ue_err_code = val & POST_ERR_RECOVERY_CODE_MASK; | |
| if (ue_err_code == 0) | |
| return false; | |
| dev_err(&adapter->pdev->dev, "Recoverable HW error code: 0x%x\n", | |
| ue_err_code); | |
| if (time_before_eq(jiffies - err_rec->probe_time, initial_idle_time)) { | |
| dev_err(&adapter->pdev->dev, | |
| "Cannot recover within %lu sec from driver load\n", | |
| jiffies_to_msecs(initial_idle_time) / MSEC_PER_SEC); | |
| return false; | |
| } | |
| if (err_rec->last_recovery_time && time_before_eq( | |
| jiffies - err_rec->last_recovery_time, recovery_interval)) { | |
| dev_err(&adapter->pdev->dev, | |
| "Cannot recover within %lu sec from last recovery\n", | |
| jiffies_to_msecs(recovery_interval) / MSEC_PER_SEC); | |
| return false; | |
| } | |
| if (ue_err_code == err_rec->last_err_code) { | |
| dev_err(&adapter->pdev->dev, | |
| "Cannot recover from a consecutive TPE error\n"); | |
| return false; | |
| } | |
| err_rec->last_recovery_time = jiffies; | |
| err_rec->last_err_code = ue_err_code; | |
| return true; | |
| } | |
| static int be_tpe_recover(struct be_adapter *adapter) | |
| { | |
| struct be_error_recovery *err_rec = &adapter->error_recovery; | |
| int status = -EAGAIN; | |
| u32 val; | |
| switch (err_rec->recovery_state) { | |
| case ERR_RECOVERY_ST_NONE: | |
| err_rec->recovery_state = ERR_RECOVERY_ST_DETECT; | |
| err_rec->resched_delay = ERR_RECOVERY_UE_DETECT_DURATION; | |
| break; | |
| case ERR_RECOVERY_ST_DETECT: | |
| val = be_POST_stage_get(adapter); | |
| if ((val & POST_STAGE_RECOVERABLE_ERR) != | |
| POST_STAGE_RECOVERABLE_ERR) { | |
| dev_err(&adapter->pdev->dev, | |
| "Unrecoverable HW error detected: 0x%x\n", val); | |
| status = -EINVAL; | |
| err_rec->resched_delay = 0; | |
| break; | |
| } | |
| dev_err(&adapter->pdev->dev, "Recoverable HW error detected\n"); | |
| /* Only PF0 initiates Chip Soft Reset. But PF0 must wait UE2SR | |
| * milliseconds before it checks for final error status in | |
| * SLIPORT_SEMAPHORE to determine if recovery criteria is met. | |
| * If it does, then PF0 initiates a Soft Reset. | |
| */ | |
| if (adapter->pf_num == 0) { | |
| err_rec->recovery_state = ERR_RECOVERY_ST_RESET; | |
| err_rec->resched_delay = err_rec->ue_to_reset_time - | |
| ERR_RECOVERY_UE_DETECT_DURATION; | |
| break; | |
| } | |
| err_rec->recovery_state = ERR_RECOVERY_ST_PRE_POLL; | |
| err_rec->resched_delay = err_rec->ue_to_poll_time - | |
| ERR_RECOVERY_UE_DETECT_DURATION; | |
| break; | |
| case ERR_RECOVERY_ST_RESET: | |
| if (!be_err_is_recoverable(adapter)) { | |
| dev_err(&adapter->pdev->dev, | |
| "Failed to meet recovery criteria\n"); | |
| status = -EIO; | |
| err_rec->resched_delay = 0; | |
| break; | |
| } | |
| be_soft_reset(adapter); | |
| err_rec->recovery_state = ERR_RECOVERY_ST_PRE_POLL; | |
| err_rec->resched_delay = err_rec->ue_to_poll_time - | |
| err_rec->ue_to_reset_time; | |
| break; | |
| case ERR_RECOVERY_ST_PRE_POLL: | |
| err_rec->recovery_state = ERR_RECOVERY_ST_REINIT; | |
| err_rec->resched_delay = 0; | |
| status = 0; /* done */ | |
| break; | |
| default: | |
| status = -EINVAL; | |
| err_rec->resched_delay = 0; | |
| break; | |
| } | |
| return status; | |
| } | |
| static int be_err_recover(struct be_adapter *adapter) | |
| { | |
| int status; | |
| if (!lancer_chip(adapter)) { | |
| if (!adapter->error_recovery.recovery_supported || | |
| adapter->priv_flags & BE_DISABLE_TPE_RECOVERY) | |
| return -EIO; | |
| status = be_tpe_recover(adapter); | |
| if (status) | |
| goto err; | |
| } | |
| /* Wait for adapter to reach quiescent state before | |
| * destroying queues | |
| */ | |
| status = be_fw_wait_ready(adapter); | |
| if (status) | |
| goto err; | |
| adapter->flags |= BE_FLAGS_TRY_RECOVERY; | |
| be_cleanup(adapter); | |
| status = be_resume(adapter); | |
| if (status) | |
| goto err; | |
| adapter->flags &= ~BE_FLAGS_TRY_RECOVERY; | |
| err: | |
| return status; | |
| } | |
| static void be_err_detection_task(struct work_struct *work) | |
| { | |
| struct be_error_recovery *err_rec = | |
| container_of(work, struct be_error_recovery, | |
| err_detection_work.work); | |
| struct be_adapter *adapter = | |
| container_of(err_rec, struct be_adapter, | |
| error_recovery); | |
| u32 resched_delay = ERR_RECOVERY_DETECTION_DELAY; | |
| struct device *dev = &adapter->pdev->dev; | |
| int recovery_status; | |
| be_detect_error(adapter); | |
| if (!be_check_error(adapter, BE_ERROR_HW)) | |
| goto reschedule_task; | |
| recovery_status = be_err_recover(adapter); | |
| if (!recovery_status) { | |
| err_rec->recovery_retries = 0; | |
| err_rec->recovery_state = ERR_RECOVERY_ST_NONE; | |
| dev_info(dev, "Adapter recovery successful\n"); | |
| goto reschedule_task; | |
| } else if (!lancer_chip(adapter) && err_rec->resched_delay) { | |
| /* BEx/SH recovery state machine */ | |
| if (adapter->pf_num == 0 && | |
| err_rec->recovery_state > ERR_RECOVERY_ST_DETECT) | |
| dev_err(&adapter->pdev->dev, | |
| "Adapter recovery in progress\n"); | |
| resched_delay = err_rec->resched_delay; | |
| goto reschedule_task; | |
| } else if (lancer_chip(adapter) && be_virtfn(adapter)) { | |
| /* For VFs, check if PF have allocated resources | |
| * every second. | |
| */ | |
| dev_err(dev, "Re-trying adapter recovery\n"); | |
| goto reschedule_task; | |
| } else if (lancer_chip(adapter) && err_rec->recovery_retries++ < | |
| ERR_RECOVERY_MAX_RETRY_COUNT) { | |
| /* In case of another error during recovery, it takes 30 sec | |
| * for adapter to come out of error. Retry error recovery after | |
| * this time interval. | |
| */ | |
| dev_err(&adapter->pdev->dev, "Re-trying adapter recovery\n"); | |
| resched_delay = ERR_RECOVERY_RETRY_DELAY; | |
| goto reschedule_task; | |
| } else { | |
| dev_err(dev, "Adapter recovery failed\n"); | |
| dev_err(dev, "Please reboot server to recover\n"); | |
| } | |
| return; | |
| reschedule_task: | |
| be_schedule_err_detection(adapter, resched_delay); | |
| } | |
| static void be_log_sfp_info(struct be_adapter *adapter) | |
| { | |
| int status; | |
| status = be_cmd_query_sfp_info(adapter); | |
| if (!status) { | |
| dev_err(&adapter->pdev->dev, | |
| "Port %c: %s Vendor: %s part no: %s", | |
| adapter->port_name, | |
| be_misconfig_evt_port_state[adapter->phy_state], | |
| adapter->phy.vendor_name, | |
| adapter->phy.vendor_pn); | |
| } | |
| adapter->flags &= ~BE_FLAGS_PHY_MISCONFIGURED; | |
| } | |
| static void be_worker(struct work_struct *work) | |
| { | |
| struct be_adapter *adapter = | |
| container_of(work, struct be_adapter, work.work); | |
| struct be_rx_obj *rxo; | |
| int i; | |
| if (be_physfn(adapter) && | |
| MODULO(adapter->work_counter, adapter->be_get_temp_freq) == 0) | |
| be_cmd_get_die_temperature(adapter); | |
| /* when interrupts are not yet enabled, just reap any pending | |
| * mcc completions | |
| */ | |
| if (!netif_running(adapter->netdev)) { | |
| local_bh_disable(); | |
| be_process_mcc(adapter); | |
| local_bh_enable(); | |
| goto reschedule; | |
| } | |
| if (!adapter->stats_cmd_sent) { | |
| if (lancer_chip(adapter)) | |
| lancer_cmd_get_pport_stats(adapter, | |
| &adapter->stats_cmd); | |
| else | |
| be_cmd_get_stats(adapter, &adapter->stats_cmd); | |
| } | |
| for_all_rx_queues(adapter, rxo, i) { | |
| /* Replenish RX-queues starved due to memory | |
| * allocation failures. | |
| */ | |
| if (rxo->rx_post_starved) | |
| be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST); | |
| } | |
| /* EQ-delay update for Skyhawk is done while notifying EQ */ | |
| if (!skyhawk_chip(adapter)) | |
| be_eqd_update(adapter, false); | |
| if (adapter->flags & BE_FLAGS_PHY_MISCONFIGURED) | |
| be_log_sfp_info(adapter); | |
| reschedule: | |
| adapter->work_counter++; | |
| queue_delayed_work(be_wq, &adapter->work, msecs_to_jiffies(1000)); | |
| } | |
| static void be_unmap_pci_bars(struct be_adapter *adapter) | |
| { | |
| if (adapter->csr) | |
| pci_iounmap(adapter->pdev, adapter->csr); | |
| if (adapter->db) | |
| pci_iounmap(adapter->pdev, adapter->db); | |
| if (adapter->pcicfg && adapter->pcicfg_mapped) | |
| pci_iounmap(adapter->pdev, adapter->pcicfg); | |
| } | |
| static int db_bar(struct be_adapter *adapter) | |
| { | |
| if (lancer_chip(adapter) || be_virtfn(adapter)) | |
| return 0; | |
| else | |
| return 4; | |
| } | |
| static int be_roce_map_pci_bars(struct be_adapter *adapter) | |
| { | |
| if (skyhawk_chip(adapter)) { | |
| adapter->roce_db.size = 4096; | |
| adapter->roce_db.io_addr = pci_resource_start(adapter->pdev, | |
| db_bar(adapter)); | |
| adapter->roce_db.total_size = pci_resource_len(adapter->pdev, | |
| db_bar(adapter)); | |
| } | |
| return 0; | |
| } | |
| static int be_map_pci_bars(struct be_adapter *adapter) | |
| { | |
| struct pci_dev *pdev = adapter->pdev; | |
| u8 __iomem *addr; | |
| u32 sli_intf; | |
| pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET, &sli_intf); | |
| adapter->sli_family = (sli_intf & SLI_INTF_FAMILY_MASK) >> | |
| SLI_INTF_FAMILY_SHIFT; | |
| adapter->virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0; | |
| if (BEx_chip(adapter) && be_physfn(adapter)) { | |
| adapter->csr = pci_iomap(pdev, 2, 0); | |
| if (!adapter->csr) | |
| return -ENOMEM; | |
| } | |
| addr = pci_iomap(pdev, db_bar(adapter), 0); | |
| if (!addr) | |
| goto pci_map_err; | |
| adapter->db = addr; | |
| if (skyhawk_chip(adapter) || BEx_chip(adapter)) { | |
| if (be_physfn(adapter)) { | |
| /* PCICFG is the 2nd BAR in BE2 */ | |
| addr = pci_iomap(pdev, BE2_chip(adapter) ? 1 : 0, 0); | |
| if (!addr) | |
| goto pci_map_err; | |
| adapter->pcicfg = addr; | |
| adapter->pcicfg_mapped = true; | |
| } else { | |
| adapter->pcicfg = adapter->db + SRIOV_VF_PCICFG_OFFSET; | |
| adapter->pcicfg_mapped = false; | |
| } | |
| } | |
| be_roce_map_pci_bars(adapter); | |
| return 0; | |
| pci_map_err: | |
| dev_err(&pdev->dev, "Error in mapping PCI BARs\n"); | |
| be_unmap_pci_bars(adapter); | |
| return -ENOMEM; | |
| } | |
| static void be_drv_cleanup(struct be_adapter *adapter) | |
| { | |
| struct be_dma_mem *mem = &adapter->mbox_mem_alloced; | |
| struct device *dev = &adapter->pdev->dev; | |
| if (mem->va) | |
| dma_free_coherent(dev, mem->size, mem->va, mem->dma); | |
| mem = &adapter->rx_filter; | |
| if (mem->va) | |
| dma_free_coherent(dev, mem->size, mem->va, mem->dma); | |
| mem = &adapter->stats_cmd; | |
| if (mem->va) | |
| dma_free_coherent(dev, mem->size, mem->va, mem->dma); | |
| } | |
| /* Allocate and initialize various fields in be_adapter struct */ | |
| static int be_drv_init(struct be_adapter *adapter) | |
| { | |
| struct be_dma_mem *mbox_mem_alloc = &adapter->mbox_mem_alloced; | |
| struct be_dma_mem *mbox_mem_align = &adapter->mbox_mem; | |
| struct be_dma_mem *rx_filter = &adapter->rx_filter; | |
| struct be_dma_mem *stats_cmd = &adapter->stats_cmd; | |
| struct device *dev = &adapter->pdev->dev; | |
| int status = 0; | |
| mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16; | |
| mbox_mem_alloc->va = dma_zalloc_coherent(dev, mbox_mem_alloc->size, | |
| &mbox_mem_alloc->dma, | |
| GFP_KERNEL); | |
| if (!mbox_mem_alloc->va) | |
| return -ENOMEM; | |
| mbox_mem_align->size = sizeof(struct be_mcc_mailbox); | |
| mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16); | |
| mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16); | |
| rx_filter->size = sizeof(struct be_cmd_req_rx_filter); | |
| rx_filter->va = dma_zalloc_coherent(dev, rx_filter->size, | |
| &rx_filter->dma, GFP_KERNEL); | |
| if (!rx_filter->va) { | |
| status = -ENOMEM; | |
| goto free_mbox; | |
| } | |
| if (lancer_chip(adapter)) | |
| stats_cmd->size = sizeof(struct lancer_cmd_req_pport_stats); | |
| else if (BE2_chip(adapter)) | |
| stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v0); | |
| else if (BE3_chip(adapter)) | |
| stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v1); | |
| else | |
| stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v2); | |
| stats_cmd->va = dma_zalloc_coherent(dev, stats_cmd->size, | |
| &stats_cmd->dma, GFP_KERNEL); | |
| if (!stats_cmd->va) { | |
| status = -ENOMEM; | |
| goto free_rx_filter; | |
| } | |
| mutex_init(&adapter->mbox_lock); | |
| mutex_init(&adapter->mcc_lock); | |
| mutex_init(&adapter->rx_filter_lock); | |
| spin_lock_init(&adapter->mcc_cq_lock); | |
| init_completion(&adapter->et_cmd_compl); | |
| pci_save_state(adapter->pdev); | |
| INIT_DELAYED_WORK(&adapter->work, be_worker); | |
| adapter->error_recovery.recovery_state = ERR_RECOVERY_ST_NONE; | |
| adapter->error_recovery.resched_delay = 0; | |
| INIT_DELAYED_WORK(&adapter->error_recovery.err_detection_work, | |
| be_err_detection_task); | |
| adapter->rx_fc = true; | |
| adapter->tx_fc = true; | |
| /* Must be a power of 2 or else MODULO will BUG_ON */ | |
| adapter->be_get_temp_freq = 64; | |
| INIT_LIST_HEAD(&adapter->vxlan_port_list); | |
| return 0; | |
| free_rx_filter: | |
| dma_free_coherent(dev, rx_filter->size, rx_filter->va, rx_filter->dma); | |
| free_mbox: | |
| dma_free_coherent(dev, mbox_mem_alloc->size, mbox_mem_alloc->va, | |
| mbox_mem_alloc->dma); | |
| return status; | |
| } | |
| static void be_remove(struct pci_dev *pdev) | |
| { | |
| struct be_adapter *adapter = pci_get_drvdata(pdev); | |
| if (!adapter) | |
| return; | |
| be_roce_dev_remove(adapter); | |
| be_intr_set(adapter, false); | |
| be_cancel_err_detection(adapter); | |
| unregister_netdev(adapter->netdev); | |
| be_clear(adapter); | |
| if (!pci_vfs_assigned(adapter->pdev)) | |
| be_cmd_reset_function(adapter); | |
| /* tell fw we're done with firing cmds */ | |
| be_cmd_fw_clean(adapter); | |
| be_unmap_pci_bars(adapter); | |
| be_drv_cleanup(adapter); | |
| pci_disable_pcie_error_reporting(pdev); | |
| pci_release_regions(pdev); | |
| pci_disable_device(pdev); | |
| free_netdev(adapter->netdev); | |
| } | |
| static ssize_t be_hwmon_show_temp(struct device *dev, | |
| struct device_attribute *dev_attr, | |
| char *buf) | |
| { | |
| struct be_adapter *adapter = dev_get_drvdata(dev); | |
| /* Unit: millidegree Celsius */ | |
| if (adapter->hwmon_info.be_on_die_temp == BE_INVALID_DIE_TEMP) | |
| return -EIO; | |
| else | |
| return sprintf(buf, "%u\n", | |
| adapter->hwmon_info.be_on_die_temp * 1000); | |
| } | |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, | |
| be_hwmon_show_temp, NULL, 1); | |
| static struct attribute *be_hwmon_attrs[] = { | |
| &sensor_dev_attr_temp1_input.dev_attr.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(be_hwmon); | |
| static char *mc_name(struct be_adapter *adapter) | |
| { | |
| char *str = ""; /* default */ | |
| switch (adapter->mc_type) { | |
| case UMC: | |
| str = "UMC"; | |
| break; | |
| case FLEX10: | |
| str = "FLEX10"; | |
| break; | |
| case vNIC1: | |
| str = "vNIC-1"; | |
| break; | |
| case nPAR: | |
| str = "nPAR"; | |
| break; | |
| case UFP: | |
| str = "UFP"; | |
| break; | |
| case vNIC2: | |
| str = "vNIC-2"; | |
| break; | |
| default: | |
| str = ""; | |
| } | |
| return str; | |
| } | |
| static inline char *func_name(struct be_adapter *adapter) | |
| { | |
| return be_physfn(adapter) ? "PF" : "VF"; | |
| } | |
| static inline char *nic_name(struct pci_dev *pdev) | |
| { | |
| switch (pdev->device) { | |
| case OC_DEVICE_ID1: | |
| return OC_NAME; | |
| case OC_DEVICE_ID2: | |
| return OC_NAME_BE; | |
| case OC_DEVICE_ID3: | |
| case OC_DEVICE_ID4: | |
| return OC_NAME_LANCER; | |
| case BE_DEVICE_ID2: | |
| return BE3_NAME; | |
| case OC_DEVICE_ID5: | |
| case OC_DEVICE_ID6: | |
| return OC_NAME_SH; | |
| default: | |
| return BE_NAME; | |
| } | |
| } | |
| static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) | |
| { | |
| struct be_adapter *adapter; | |
| struct net_device *netdev; | |
| int status = 0; | |
| dev_info(&pdev->dev, "%s version is %s\n", DRV_NAME, DRV_VER); | |
| status = pci_enable_device(pdev); | |
| if (status) | |
| goto do_none; | |
| status = pci_request_regions(pdev, DRV_NAME); | |
| if (status) | |
| goto disable_dev; | |
| pci_set_master(pdev); | |
| netdev = alloc_etherdev_mqs(sizeof(*adapter), MAX_TX_QS, MAX_RX_QS); | |
| if (!netdev) { | |
| status = -ENOMEM; | |
| goto rel_reg; | |
| } | |
| adapter = netdev_priv(netdev); | |
| adapter->pdev = pdev; | |
| pci_set_drvdata(pdev, adapter); | |
| adapter->netdev = netdev; | |
| SET_NETDEV_DEV(netdev, &pdev->dev); | |
| status = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); | |
| if (!status) { | |
| netdev->features |= NETIF_F_HIGHDMA; | |
| } else { | |
| status = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | |
| if (status) { | |
| dev_err(&pdev->dev, "Could not set PCI DMA Mask\n"); | |
| goto free_netdev; | |
| } | |
| } | |
| status = pci_enable_pcie_error_reporting(pdev); | |
| if (!status) | |
| dev_info(&pdev->dev, "PCIe error reporting enabled\n"); | |
| status = be_map_pci_bars(adapter); | |
| if (status) | |
| goto free_netdev; | |
| status = be_drv_init(adapter); | |
| if (status) | |
| goto unmap_bars; | |
| status = be_setup(adapter); | |
| if (status) | |
| goto drv_cleanup; | |
| be_netdev_init(netdev); | |
| status = register_netdev(netdev); | |
| if (status != 0) | |
| goto unsetup; | |
| be_roce_dev_add(adapter); | |
| be_schedule_err_detection(adapter, ERR_DETECTION_DELAY); | |
| adapter->error_recovery.probe_time = jiffies; | |
| /* On Die temperature not supported for VF. */ | |
| if (be_physfn(adapter) && IS_ENABLED(CONFIG_BE2NET_HWMON)) { | |
| adapter->hwmon_info.hwmon_dev = | |
| devm_hwmon_device_register_with_groups(&pdev->dev, | |
| DRV_NAME, | |
| adapter, | |
| be_hwmon_groups); | |
| adapter->hwmon_info.be_on_die_temp = BE_INVALID_DIE_TEMP; | |
| } | |
| dev_info(&pdev->dev, "%s: %s %s port %c\n", nic_name(pdev), | |
| func_name(adapter), mc_name(adapter), adapter->port_name); | |
| return 0; | |
| unsetup: | |
| be_clear(adapter); | |
| drv_cleanup: | |
| be_drv_cleanup(adapter); | |
| unmap_bars: | |
| be_unmap_pci_bars(adapter); | |
| free_netdev: | |
| free_netdev(netdev); | |
| rel_reg: | |
| pci_release_regions(pdev); | |
| disable_dev: | |
| pci_disable_device(pdev); | |
| do_none: | |
| dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev)); | |
| return status; | |
| } | |
| static int be_suspend(struct pci_dev *pdev, pm_message_t state) | |
| { | |
| struct be_adapter *adapter = pci_get_drvdata(pdev); | |
| be_intr_set(adapter, false); | |
| be_cancel_err_detection(adapter); | |
| be_cleanup(adapter); | |
| pci_save_state(pdev); | |
| pci_disable_device(pdev); | |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); | |
| return 0; | |
| } | |
| static int be_pci_resume(struct pci_dev *pdev) | |
| { | |
| struct be_adapter *adapter = pci_get_drvdata(pdev); | |
| int status = 0; | |
| status = pci_enable_device(pdev); | |
| if (status) | |
| return status; | |
| pci_restore_state(pdev); | |
| status = be_resume(adapter); | |
| if (status) | |
| return status; | |
| be_schedule_err_detection(adapter, ERR_DETECTION_DELAY); | |
| return 0; | |
| } | |
| /* | |
| * An FLR will stop BE from DMAing any data. | |
| */ | |
| static void be_shutdown(struct pci_dev *pdev) | |
| { | |
| struct be_adapter *adapter = pci_get_drvdata(pdev); | |
| if (!adapter) | |
| return; | |
| be_roce_dev_shutdown(adapter); | |
| cancel_delayed_work_sync(&adapter->work); | |
| be_cancel_err_detection(adapter); | |
| netif_device_detach(adapter->netdev); | |
| be_cmd_reset_function(adapter); | |
| pci_disable_device(pdev); | |
| } | |
| static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev, | |
| pci_channel_state_t state) | |
| { | |
| struct be_adapter *adapter = pci_get_drvdata(pdev); | |
| dev_err(&adapter->pdev->dev, "EEH error detected\n"); | |
| be_roce_dev_remove(adapter); | |
| if (!be_check_error(adapter, BE_ERROR_EEH)) { | |
| be_set_error(adapter, BE_ERROR_EEH); | |
| be_cancel_err_detection(adapter); | |
| be_cleanup(adapter); | |
| } | |
| if (state == pci_channel_io_perm_failure) | |
| return PCI_ERS_RESULT_DISCONNECT; | |
| pci_disable_device(pdev); | |
| /* The error could cause the FW to trigger a flash debug dump. | |
| * Resetting the card while flash dump is in progress | |
| * can cause it not to recover; wait for it to finish. | |
| * Wait only for first function as it is needed only once per | |
| * adapter. | |
| */ | |
| if (pdev->devfn == 0) | |
| ssleep(30); | |
| return PCI_ERS_RESULT_NEED_RESET; | |
| } | |
| static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) | |
| { | |
| struct be_adapter *adapter = pci_get_drvdata(pdev); | |
| int status; | |
| dev_info(&adapter->pdev->dev, "EEH reset\n"); | |
| status = pci_enable_device(pdev); | |
| if (status) | |
| return PCI_ERS_RESULT_DISCONNECT; | |
| pci_set_master(pdev); | |
| pci_restore_state(pdev); | |
| /* Check if card is ok and fw is ready */ | |
| dev_info(&adapter->pdev->dev, | |
| "Waiting for FW to be ready after EEH reset\n"); | |
| status = be_fw_wait_ready(adapter); | |
| if (status) | |
| return PCI_ERS_RESULT_DISCONNECT; | |
| pci_cleanup_aer_uncorrect_error_status(pdev); | |
| be_clear_error(adapter, BE_CLEAR_ALL); | |
| return PCI_ERS_RESULT_RECOVERED; | |
| } | |
| static void be_eeh_resume(struct pci_dev *pdev) | |
| { | |
| int status = 0; | |
| struct be_adapter *adapter = pci_get_drvdata(pdev); | |
| dev_info(&adapter->pdev->dev, "EEH resume\n"); | |
| pci_save_state(pdev); | |
| status = be_resume(adapter); | |
| if (status) | |
| goto err; | |
| be_roce_dev_add(adapter); | |
| be_schedule_err_detection(adapter, ERR_DETECTION_DELAY); | |
| return; | |
| err: | |
| dev_err(&adapter->pdev->dev, "EEH resume failed\n"); | |
| } | |
| static int be_pci_sriov_configure(struct pci_dev *pdev, int num_vfs) | |
| { | |
| struct be_adapter *adapter = pci_get_drvdata(pdev); | |
| struct be_resources vft_res = {0}; | |
| int status; | |
| if (!num_vfs) | |
| be_vf_clear(adapter); | |
| adapter->num_vfs = num_vfs; | |
| if (adapter->num_vfs == 0 && pci_vfs_assigned(pdev)) { | |
| dev_warn(&pdev->dev, | |
| "Cannot disable VFs while they are assigned\n"); | |
| return -EBUSY; | |
| } | |
| /* When the HW is in SRIOV capable configuration, the PF-pool resources | |
| * are equally distributed across the max-number of VFs. The user may | |
| * request only a subset of the max-vfs to be enabled. | |
| * Based on num_vfs, redistribute the resources across num_vfs so that | |
| * each VF will have access to more number of resources. | |
| * This facility is not available in BE3 FW. | |
| * Also, this is done by FW in Lancer chip. | |
| */ | |
| if (skyhawk_chip(adapter) && !pci_num_vf(pdev)) { | |
| be_calculate_vf_res(adapter, adapter->num_vfs, | |
| &vft_res); | |
| status = be_cmd_set_sriov_config(adapter, adapter->pool_res, | |
| adapter->num_vfs, &vft_res); | |
| if (status) | |
| dev_err(&pdev->dev, | |
| "Failed to optimize SR-IOV resources\n"); | |
| } | |
| status = be_get_resources(adapter); | |
| if (status) | |
| return be_cmd_status(status); | |
| /* Updating real_num_tx/rx_queues() requires rtnl_lock() */ | |
| rtnl_lock(); | |
| status = be_update_queues(adapter); | |
| rtnl_unlock(); | |
| if (status) | |
| return be_cmd_status(status); | |
| if (adapter->num_vfs) | |
| status = be_vf_setup(adapter); | |
| if (!status) | |
| return adapter->num_vfs; | |
| return 0; | |
| } | |
| static const struct pci_error_handlers be_eeh_handlers = { | |
| .error_detected = be_eeh_err_detected, | |
| .slot_reset = be_eeh_reset, | |
| .resume = be_eeh_resume, | |
| }; | |
| static struct pci_driver be_driver = { | |
| .name = DRV_NAME, | |
| .id_table = be_dev_ids, | |
| .probe = be_probe, | |
| .remove = be_remove, | |
| .suspend = be_suspend, | |
| .resume = be_pci_resume, | |
| .shutdown = be_shutdown, | |
| .sriov_configure = be_pci_sriov_configure, | |
| .err_handler = &be_eeh_handlers | |
| }; | |
| static int __init be_init_module(void) | |
| { | |
| int status; | |
| if (rx_frag_size != 8192 && rx_frag_size != 4096 && | |
| rx_frag_size != 2048) { | |
| printk(KERN_WARNING DRV_NAME | |
| " : Module param rx_frag_size must be 2048/4096/8192." | |
| " Using 2048\n"); | |
| rx_frag_size = 2048; | |
| } | |
| if (num_vfs > 0) { | |
| pr_info(DRV_NAME " : Module param num_vfs is obsolete."); | |
| pr_info(DRV_NAME " : Use sysfs method to enable VFs\n"); | |
| } | |
| be_wq = create_singlethread_workqueue("be_wq"); | |
| if (!be_wq) { | |
| pr_warn(DRV_NAME "workqueue creation failed\n"); | |
| return -1; | |
| } | |
| be_err_recovery_workq = | |
| create_singlethread_workqueue("be_err_recover"); | |
| if (!be_err_recovery_workq) | |
| pr_warn(DRV_NAME "Could not create error recovery workqueue\n"); | |
| status = pci_register_driver(&be_driver); | |
| if (status) { | |
| destroy_workqueue(be_wq); | |
| be_destroy_err_recovery_workq(); | |
| } | |
| return status; | |
| } | |
| module_init(be_init_module); | |
| static void __exit be_exit_module(void) | |
| { | |
| pci_unregister_driver(&be_driver); | |
| be_destroy_err_recovery_workq(); | |
| if (be_wq) | |
| destroy_workqueue(be_wq); | |
| } | |
| module_exit(be_exit_module); |