| /******************************************************************************* | |
| * | |
| * Intel Ethernet Controller XL710 Family Linux Driver | |
| * Copyright(c) 2013 - 2014 Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program. If not, see <http://www.gnu.org/licenses/>. | |
| * | |
| * The full GNU General Public License is included in this distribution in | |
| * the file called "COPYING". | |
| * | |
| * Contact Information: | |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
| * | |
| ******************************************************************************/ | |
| #include "i40e_prototype.h" | |
| /** | |
| * i40e_init_nvm_ops - Initialize NVM function pointers | |
| * @hw: pointer to the HW structure | |
| * | |
| * Setup the function pointers and the NVM info structure. Should be called | |
| * once per NVM initialization, e.g. inside the i40e_init_shared_code(). | |
| * Please notice that the NVM term is used here (& in all methods covered | |
| * in this file) as an equivalent of the FLASH part mapped into the SR. | |
| * We are accessing FLASH always thru the Shadow RAM. | |
| **/ | |
| i40e_status i40e_init_nvm(struct i40e_hw *hw) | |
| { | |
| struct i40e_nvm_info *nvm = &hw->nvm; | |
| i40e_status ret_code = 0; | |
| u32 fla, gens; | |
| u8 sr_size; | |
| /* The SR size is stored regardless of the nvm programming mode | |
| * as the blank mode may be used in the factory line. | |
| */ | |
| gens = rd32(hw, I40E_GLNVM_GENS); | |
| sr_size = ((gens & I40E_GLNVM_GENS_SR_SIZE_MASK) >> | |
| I40E_GLNVM_GENS_SR_SIZE_SHIFT); | |
| /* Switching to words (sr_size contains power of 2KB) */ | |
| nvm->sr_size = BIT(sr_size) * I40E_SR_WORDS_IN_1KB; | |
| /* Check if we are in the normal or blank NVM programming mode */ | |
| fla = rd32(hw, I40E_GLNVM_FLA); | |
| if (fla & I40E_GLNVM_FLA_LOCKED_MASK) { /* Normal programming mode */ | |
| /* Max NVM timeout */ | |
| nvm->timeout = I40E_MAX_NVM_TIMEOUT; | |
| nvm->blank_nvm_mode = false; | |
| } else { /* Blank programming mode */ | |
| nvm->blank_nvm_mode = true; | |
| ret_code = I40E_ERR_NVM_BLANK_MODE; | |
| i40e_debug(hw, I40E_DEBUG_NVM, "NVM init error: unsupported blank mode.\n"); | |
| } | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_acquire_nvm - Generic request for acquiring the NVM ownership | |
| * @hw: pointer to the HW structure | |
| * @access: NVM access type (read or write) | |
| * | |
| * This function will request NVM ownership for reading | |
| * via the proper Admin Command. | |
| **/ | |
| i40e_status i40e_acquire_nvm(struct i40e_hw *hw, | |
| enum i40e_aq_resource_access_type access) | |
| { | |
| i40e_status ret_code = 0; | |
| u64 gtime, timeout; | |
| u64 time_left = 0; | |
| if (hw->nvm.blank_nvm_mode) | |
| goto i40e_i40e_acquire_nvm_exit; | |
| ret_code = i40e_aq_request_resource(hw, I40E_NVM_RESOURCE_ID, access, | |
| 0, &time_left, NULL); | |
| /* Reading the Global Device Timer */ | |
| gtime = rd32(hw, I40E_GLVFGEN_TIMER); | |
| /* Store the timeout */ | |
| hw->nvm.hw_semaphore_timeout = I40E_MS_TO_GTIME(time_left) + gtime; | |
| if (ret_code) | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM acquire type %d failed time_left=%llu ret=%d aq_err=%d\n", | |
| access, time_left, ret_code, hw->aq.asq_last_status); | |
| if (ret_code && time_left) { | |
| /* Poll until the current NVM owner timeouts */ | |
| timeout = I40E_MS_TO_GTIME(I40E_MAX_NVM_TIMEOUT) + gtime; | |
| while ((gtime < timeout) && time_left) { | |
| usleep_range(10000, 20000); | |
| gtime = rd32(hw, I40E_GLVFGEN_TIMER); | |
| ret_code = i40e_aq_request_resource(hw, | |
| I40E_NVM_RESOURCE_ID, | |
| access, 0, &time_left, | |
| NULL); | |
| if (!ret_code) { | |
| hw->nvm.hw_semaphore_timeout = | |
| I40E_MS_TO_GTIME(time_left) + gtime; | |
| break; | |
| } | |
| } | |
| if (ret_code) { | |
| hw->nvm.hw_semaphore_timeout = 0; | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM acquire timed out, wait %llu ms before trying again. status=%d aq_err=%d\n", | |
| time_left, ret_code, hw->aq.asq_last_status); | |
| } | |
| } | |
| i40e_i40e_acquire_nvm_exit: | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_release_nvm - Generic request for releasing the NVM ownership | |
| * @hw: pointer to the HW structure | |
| * | |
| * This function will release NVM resource via the proper Admin Command. | |
| **/ | |
| void i40e_release_nvm(struct i40e_hw *hw) | |
| { | |
| i40e_status ret_code = I40E_SUCCESS; | |
| u32 total_delay = 0; | |
| if (hw->nvm.blank_nvm_mode) | |
| return; | |
| ret_code = i40e_aq_release_resource(hw, I40E_NVM_RESOURCE_ID, 0, NULL); | |
| /* there are some rare cases when trying to release the resource | |
| * results in an admin Q timeout, so handle them correctly | |
| */ | |
| while ((ret_code == I40E_ERR_ADMIN_QUEUE_TIMEOUT) && | |
| (total_delay < hw->aq.asq_cmd_timeout)) { | |
| usleep_range(1000, 2000); | |
| ret_code = i40e_aq_release_resource(hw, | |
| I40E_NVM_RESOURCE_ID, | |
| 0, NULL); | |
| total_delay++; | |
| } | |
| } | |
| /** | |
| * i40e_poll_sr_srctl_done_bit - Polls the GLNVM_SRCTL done bit | |
| * @hw: pointer to the HW structure | |
| * | |
| * Polls the SRCTL Shadow RAM register done bit. | |
| **/ | |
| static i40e_status i40e_poll_sr_srctl_done_bit(struct i40e_hw *hw) | |
| { | |
| i40e_status ret_code = I40E_ERR_TIMEOUT; | |
| u32 srctl, wait_cnt; | |
| /* Poll the I40E_GLNVM_SRCTL until the done bit is set */ | |
| for (wait_cnt = 0; wait_cnt < I40E_SRRD_SRCTL_ATTEMPTS; wait_cnt++) { | |
| srctl = rd32(hw, I40E_GLNVM_SRCTL); | |
| if (srctl & I40E_GLNVM_SRCTL_DONE_MASK) { | |
| ret_code = 0; | |
| break; | |
| } | |
| udelay(5); | |
| } | |
| if (ret_code == I40E_ERR_TIMEOUT) | |
| i40e_debug(hw, I40E_DEBUG_NVM, "Done bit in GLNVM_SRCTL not set"); | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_read_nvm_word_srctl - Reads Shadow RAM via SRCTL register | |
| * @hw: pointer to the HW structure | |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF) | |
| * @data: word read from the Shadow RAM | |
| * | |
| * Reads one 16 bit word from the Shadow RAM using the GLNVM_SRCTL register. | |
| **/ | |
| static i40e_status i40e_read_nvm_word_srctl(struct i40e_hw *hw, u16 offset, | |
| u16 *data) | |
| { | |
| i40e_status ret_code = I40E_ERR_TIMEOUT; | |
| u32 sr_reg; | |
| if (offset >= hw->nvm.sr_size) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM read error: offset %d beyond Shadow RAM limit %d\n", | |
| offset, hw->nvm.sr_size); | |
| ret_code = I40E_ERR_PARAM; | |
| goto read_nvm_exit; | |
| } | |
| /* Poll the done bit first */ | |
| ret_code = i40e_poll_sr_srctl_done_bit(hw); | |
| if (!ret_code) { | |
| /* Write the address and start reading */ | |
| sr_reg = ((u32)offset << I40E_GLNVM_SRCTL_ADDR_SHIFT) | | |
| BIT(I40E_GLNVM_SRCTL_START_SHIFT); | |
| wr32(hw, I40E_GLNVM_SRCTL, sr_reg); | |
| /* Poll I40E_GLNVM_SRCTL until the done bit is set */ | |
| ret_code = i40e_poll_sr_srctl_done_bit(hw); | |
| if (!ret_code) { | |
| sr_reg = rd32(hw, I40E_GLNVM_SRDATA); | |
| *data = (u16)((sr_reg & | |
| I40E_GLNVM_SRDATA_RDDATA_MASK) | |
| >> I40E_GLNVM_SRDATA_RDDATA_SHIFT); | |
| } | |
| } | |
| if (ret_code) | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM read error: Couldn't access Shadow RAM address: 0x%x\n", | |
| offset); | |
| read_nvm_exit: | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_read_nvm_aq - Read Shadow RAM. | |
| * @hw: pointer to the HW structure. | |
| * @module_pointer: module pointer location in words from the NVM beginning | |
| * @offset: offset in words from module start | |
| * @words: number of words to write | |
| * @data: buffer with words to write to the Shadow RAM | |
| * @last_command: tells the AdminQ that this is the last command | |
| * | |
| * Writes a 16 bit words buffer to the Shadow RAM using the admin command. | |
| **/ | |
| static i40e_status i40e_read_nvm_aq(struct i40e_hw *hw, u8 module_pointer, | |
| u32 offset, u16 words, void *data, | |
| bool last_command) | |
| { | |
| i40e_status ret_code = I40E_ERR_NVM; | |
| struct i40e_asq_cmd_details cmd_details; | |
| memset(&cmd_details, 0, sizeof(cmd_details)); | |
| cmd_details.wb_desc = &hw->nvm_wb_desc; | |
| /* Here we are checking the SR limit only for the flat memory model. | |
| * We cannot do it for the module-based model, as we did not acquire | |
| * the NVM resource yet (we cannot get the module pointer value). | |
| * Firmware will check the module-based model. | |
| */ | |
| if ((offset + words) > hw->nvm.sr_size) | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM write error: offset %d beyond Shadow RAM limit %d\n", | |
| (offset + words), hw->nvm.sr_size); | |
| else if (words > I40E_SR_SECTOR_SIZE_IN_WORDS) | |
| /* We can write only up to 4KB (one sector), in one AQ write */ | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM write fail error: tried to write %d words, limit is %d.\n", | |
| words, I40E_SR_SECTOR_SIZE_IN_WORDS); | |
| else if (((offset + (words - 1)) / I40E_SR_SECTOR_SIZE_IN_WORDS) | |
| != (offset / I40E_SR_SECTOR_SIZE_IN_WORDS)) | |
| /* A single write cannot spread over two sectors */ | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM write error: cannot spread over two sectors in a single write offset=%d words=%d\n", | |
| offset, words); | |
| else | |
| ret_code = i40e_aq_read_nvm(hw, module_pointer, | |
| 2 * offset, /*bytes*/ | |
| 2 * words, /*bytes*/ | |
| data, last_command, &cmd_details); | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_read_nvm_word_aq - Reads Shadow RAM via AQ | |
| * @hw: pointer to the HW structure | |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF) | |
| * @data: word read from the Shadow RAM | |
| * | |
| * Reads one 16 bit word from the Shadow RAM using the AdminQ | |
| **/ | |
| static i40e_status i40e_read_nvm_word_aq(struct i40e_hw *hw, u16 offset, | |
| u16 *data) | |
| { | |
| i40e_status ret_code = I40E_ERR_TIMEOUT; | |
| ret_code = i40e_read_nvm_aq(hw, 0x0, offset, 1, data, true); | |
| *data = le16_to_cpu(*(__le16 *)data); | |
| return ret_code; | |
| } | |
| /** | |
| * __i40e_read_nvm_word - Reads nvm word, assumes caller does the locking | |
| * @hw: pointer to the HW structure | |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF) | |
| * @data: word read from the Shadow RAM | |
| * | |
| * Reads one 16 bit word from the Shadow RAM. | |
| * | |
| * Do not use this function except in cases where the nvm lock is already | |
| * taken via i40e_acquire_nvm(). | |
| **/ | |
| static i40e_status __i40e_read_nvm_word(struct i40e_hw *hw, | |
| u16 offset, u16 *data) | |
| { | |
| if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE) | |
| return i40e_read_nvm_word_aq(hw, offset, data); | |
| return i40e_read_nvm_word_srctl(hw, offset, data); | |
| } | |
| /** | |
| * i40e_read_nvm_word - Reads nvm word and acquire lock if necessary | |
| * @hw: pointer to the HW structure | |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF) | |
| * @data: word read from the Shadow RAM | |
| * | |
| * Reads one 16 bit word from the Shadow RAM. | |
| **/ | |
| i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset, | |
| u16 *data) | |
| { | |
| i40e_status ret_code = 0; | |
| if (hw->flags & I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK) | |
| ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); | |
| if (ret_code) | |
| return ret_code; | |
| ret_code = __i40e_read_nvm_word(hw, offset, data); | |
| if (hw->flags & I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK) | |
| i40e_release_nvm(hw); | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_read_nvm_buffer_srctl - Reads Shadow RAM buffer via SRCTL register | |
| * @hw: pointer to the HW structure | |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF). | |
| * @words: (in) number of words to read; (out) number of words actually read | |
| * @data: words read from the Shadow RAM | |
| * | |
| * Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd() | |
| * method. The buffer read is preceded by the NVM ownership take | |
| * and followed by the release. | |
| **/ | |
| static i40e_status i40e_read_nvm_buffer_srctl(struct i40e_hw *hw, u16 offset, | |
| u16 *words, u16 *data) | |
| { | |
| i40e_status ret_code = 0; | |
| u16 index, word; | |
| /* Loop thru the selected region */ | |
| for (word = 0; word < *words; word++) { | |
| index = offset + word; | |
| ret_code = i40e_read_nvm_word_srctl(hw, index, &data[word]); | |
| if (ret_code) | |
| break; | |
| } | |
| /* Update the number of words read from the Shadow RAM */ | |
| *words = word; | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_read_nvm_buffer_aq - Reads Shadow RAM buffer via AQ | |
| * @hw: pointer to the HW structure | |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF). | |
| * @words: (in) number of words to read; (out) number of words actually read | |
| * @data: words read from the Shadow RAM | |
| * | |
| * Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_aq() | |
| * method. The buffer read is preceded by the NVM ownership take | |
| * and followed by the release. | |
| **/ | |
| static i40e_status i40e_read_nvm_buffer_aq(struct i40e_hw *hw, u16 offset, | |
| u16 *words, u16 *data) | |
| { | |
| i40e_status ret_code; | |
| u16 read_size = *words; | |
| bool last_cmd = false; | |
| u16 words_read = 0; | |
| u16 i = 0; | |
| do { | |
| /* Calculate number of bytes we should read in this step. | |
| * FVL AQ do not allow to read more than one page at a time or | |
| * to cross page boundaries. | |
| */ | |
| if (offset % I40E_SR_SECTOR_SIZE_IN_WORDS) | |
| read_size = min(*words, | |
| (u16)(I40E_SR_SECTOR_SIZE_IN_WORDS - | |
| (offset % I40E_SR_SECTOR_SIZE_IN_WORDS))); | |
| else | |
| read_size = min((*words - words_read), | |
| I40E_SR_SECTOR_SIZE_IN_WORDS); | |
| /* Check if this is last command, if so set proper flag */ | |
| if ((words_read + read_size) >= *words) | |
| last_cmd = true; | |
| ret_code = i40e_read_nvm_aq(hw, 0x0, offset, read_size, | |
| data + words_read, last_cmd); | |
| if (ret_code) | |
| goto read_nvm_buffer_aq_exit; | |
| /* Increment counter for words already read and move offset to | |
| * new read location | |
| */ | |
| words_read += read_size; | |
| offset += read_size; | |
| } while (words_read < *words); | |
| for (i = 0; i < *words; i++) | |
| data[i] = le16_to_cpu(((__le16 *)data)[i]); | |
| read_nvm_buffer_aq_exit: | |
| *words = words_read; | |
| return ret_code; | |
| } | |
| /** | |
| * __i40e_read_nvm_buffer - Reads nvm buffer, caller must acquire lock | |
| * @hw: pointer to the HW structure | |
| * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF). | |
| * @words: (in) number of words to read; (out) number of words actually read | |
| * @data: words read from the Shadow RAM | |
| * | |
| * Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd() | |
| * method. | |
| **/ | |
| static i40e_status __i40e_read_nvm_buffer(struct i40e_hw *hw, | |
| u16 offset, u16 *words, | |
| u16 *data) | |
| { | |
| if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE) | |
| return i40e_read_nvm_buffer_aq(hw, offset, words, data); | |
| return i40e_read_nvm_buffer_srctl(hw, offset, words, data); | |
| } | |
| /** | |
| * i40e_write_nvm_aq - Writes Shadow RAM. | |
| * @hw: pointer to the HW structure. | |
| * @module_pointer: module pointer location in words from the NVM beginning | |
| * @offset: offset in words from module start | |
| * @words: number of words to write | |
| * @data: buffer with words to write to the Shadow RAM | |
| * @last_command: tells the AdminQ that this is the last command | |
| * | |
| * Writes a 16 bit words buffer to the Shadow RAM using the admin command. | |
| **/ | |
| static i40e_status i40e_write_nvm_aq(struct i40e_hw *hw, u8 module_pointer, | |
| u32 offset, u16 words, void *data, | |
| bool last_command) | |
| { | |
| i40e_status ret_code = I40E_ERR_NVM; | |
| struct i40e_asq_cmd_details cmd_details; | |
| memset(&cmd_details, 0, sizeof(cmd_details)); | |
| cmd_details.wb_desc = &hw->nvm_wb_desc; | |
| /* Here we are checking the SR limit only for the flat memory model. | |
| * We cannot do it for the module-based model, as we did not acquire | |
| * the NVM resource yet (we cannot get the module pointer value). | |
| * Firmware will check the module-based model. | |
| */ | |
| if ((offset + words) > hw->nvm.sr_size) | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM write error: offset %d beyond Shadow RAM limit %d\n", | |
| (offset + words), hw->nvm.sr_size); | |
| else if (words > I40E_SR_SECTOR_SIZE_IN_WORDS) | |
| /* We can write only up to 4KB (one sector), in one AQ write */ | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM write fail error: tried to write %d words, limit is %d.\n", | |
| words, I40E_SR_SECTOR_SIZE_IN_WORDS); | |
| else if (((offset + (words - 1)) / I40E_SR_SECTOR_SIZE_IN_WORDS) | |
| != (offset / I40E_SR_SECTOR_SIZE_IN_WORDS)) | |
| /* A single write cannot spread over two sectors */ | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVM write error: cannot spread over two sectors in a single write offset=%d words=%d\n", | |
| offset, words); | |
| else | |
| ret_code = i40e_aq_update_nvm(hw, module_pointer, | |
| 2 * offset, /*bytes*/ | |
| 2 * words, /*bytes*/ | |
| data, last_command, &cmd_details); | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_calc_nvm_checksum - Calculates and returns the checksum | |
| * @hw: pointer to hardware structure | |
| * @checksum: pointer to the checksum | |
| * | |
| * This function calculates SW Checksum that covers the whole 64kB shadow RAM | |
| * except the VPD and PCIe ALT Auto-load modules. The structure and size of VPD | |
| * is customer specific and unknown. Therefore, this function skips all maximum | |
| * possible size of VPD (1kB). | |
| **/ | |
| static i40e_status i40e_calc_nvm_checksum(struct i40e_hw *hw, | |
| u16 *checksum) | |
| { | |
| i40e_status ret_code; | |
| struct i40e_virt_mem vmem; | |
| u16 pcie_alt_module = 0; | |
| u16 checksum_local = 0; | |
| u16 vpd_module = 0; | |
| u16 *data; | |
| u16 i = 0; | |
| ret_code = i40e_allocate_virt_mem(hw, &vmem, | |
| I40E_SR_SECTOR_SIZE_IN_WORDS * sizeof(u16)); | |
| if (ret_code) | |
| goto i40e_calc_nvm_checksum_exit; | |
| data = (u16 *)vmem.va; | |
| /* read pointer to VPD area */ | |
| ret_code = __i40e_read_nvm_word(hw, I40E_SR_VPD_PTR, &vpd_module); | |
| if (ret_code) { | |
| ret_code = I40E_ERR_NVM_CHECKSUM; | |
| goto i40e_calc_nvm_checksum_exit; | |
| } | |
| /* read pointer to PCIe Alt Auto-load module */ | |
| ret_code = __i40e_read_nvm_word(hw, I40E_SR_PCIE_ALT_AUTO_LOAD_PTR, | |
| &pcie_alt_module); | |
| if (ret_code) { | |
| ret_code = I40E_ERR_NVM_CHECKSUM; | |
| goto i40e_calc_nvm_checksum_exit; | |
| } | |
| /* Calculate SW checksum that covers the whole 64kB shadow RAM | |
| * except the VPD and PCIe ALT Auto-load modules | |
| */ | |
| for (i = 0; i < hw->nvm.sr_size; i++) { | |
| /* Read SR page */ | |
| if ((i % I40E_SR_SECTOR_SIZE_IN_WORDS) == 0) { | |
| u16 words = I40E_SR_SECTOR_SIZE_IN_WORDS; | |
| ret_code = __i40e_read_nvm_buffer(hw, i, &words, data); | |
| if (ret_code) { | |
| ret_code = I40E_ERR_NVM_CHECKSUM; | |
| goto i40e_calc_nvm_checksum_exit; | |
| } | |
| } | |
| /* Skip Checksum word */ | |
| if (i == I40E_SR_SW_CHECKSUM_WORD) | |
| continue; | |
| /* Skip VPD module (convert byte size to word count) */ | |
| if ((i >= (u32)vpd_module) && | |
| (i < ((u32)vpd_module + | |
| (I40E_SR_VPD_MODULE_MAX_SIZE / 2)))) { | |
| continue; | |
| } | |
| /* Skip PCIe ALT module (convert byte size to word count) */ | |
| if ((i >= (u32)pcie_alt_module) && | |
| (i < ((u32)pcie_alt_module + | |
| (I40E_SR_PCIE_ALT_MODULE_MAX_SIZE / 2)))) { | |
| continue; | |
| } | |
| checksum_local += data[i % I40E_SR_SECTOR_SIZE_IN_WORDS]; | |
| } | |
| *checksum = (u16)I40E_SR_SW_CHECKSUM_BASE - checksum_local; | |
| i40e_calc_nvm_checksum_exit: | |
| i40e_free_virt_mem(hw, &vmem); | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_update_nvm_checksum - Updates the NVM checksum | |
| * @hw: pointer to hardware structure | |
| * | |
| * NVM ownership must be acquired before calling this function and released | |
| * on ARQ completion event reception by caller. | |
| * This function will commit SR to NVM. | |
| **/ | |
| i40e_status i40e_update_nvm_checksum(struct i40e_hw *hw) | |
| { | |
| i40e_status ret_code; | |
| u16 checksum; | |
| __le16 le_sum; | |
| ret_code = i40e_calc_nvm_checksum(hw, &checksum); | |
| if (!ret_code) { | |
| le_sum = cpu_to_le16(checksum); | |
| ret_code = i40e_write_nvm_aq(hw, 0x00, I40E_SR_SW_CHECKSUM_WORD, | |
| 1, &le_sum, true); | |
| } | |
| return ret_code; | |
| } | |
| /** | |
| * i40e_validate_nvm_checksum - Validate EEPROM checksum | |
| * @hw: pointer to hardware structure | |
| * @checksum: calculated checksum | |
| * | |
| * Performs checksum calculation and validates the NVM SW checksum. If the | |
| * caller does not need checksum, the value can be NULL. | |
| **/ | |
| i40e_status i40e_validate_nvm_checksum(struct i40e_hw *hw, | |
| u16 *checksum) | |
| { | |
| i40e_status ret_code = 0; | |
| u16 checksum_sr = 0; | |
| u16 checksum_local = 0; | |
| /* We must acquire the NVM lock in order to correctly synchronize the | |
| * NVM accesses across multiple PFs. Without doing so it is possible | |
| * for one of the PFs to read invalid data potentially indicating that | |
| * the checksum is invalid. | |
| */ | |
| ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); | |
| if (ret_code) | |
| return ret_code; | |
| ret_code = i40e_calc_nvm_checksum(hw, &checksum_local); | |
| __i40e_read_nvm_word(hw, I40E_SR_SW_CHECKSUM_WORD, &checksum_sr); | |
| i40e_release_nvm(hw); | |
| if (ret_code) | |
| return ret_code; | |
| /* Verify read checksum from EEPROM is the same as | |
| * calculated checksum | |
| */ | |
| if (checksum_local != checksum_sr) | |
| ret_code = I40E_ERR_NVM_CHECKSUM; | |
| /* If the user cares, return the calculated checksum */ | |
| if (checksum) | |
| *checksum = checksum_local; | |
| return ret_code; | |
| } | |
| static i40e_status i40e_nvmupd_state_init(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno); | |
| static i40e_status i40e_nvmupd_state_reading(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno); | |
| static i40e_status i40e_nvmupd_state_writing(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *errno); | |
| static enum i40e_nvmupd_cmd i40e_nvmupd_validate_command(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| int *perrno); | |
| static i40e_status i40e_nvmupd_nvm_erase(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| int *perrno); | |
| static i40e_status i40e_nvmupd_nvm_write(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno); | |
| static i40e_status i40e_nvmupd_nvm_read(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno); | |
| static i40e_status i40e_nvmupd_exec_aq(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno); | |
| static i40e_status i40e_nvmupd_get_aq_result(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno); | |
| static inline u8 i40e_nvmupd_get_module(u32 val) | |
| { | |
| return (u8)(val & I40E_NVM_MOD_PNT_MASK); | |
| } | |
| static inline u8 i40e_nvmupd_get_transaction(u32 val) | |
| { | |
| return (u8)((val & I40E_NVM_TRANS_MASK) >> I40E_NVM_TRANS_SHIFT); | |
| } | |
| static const char * const i40e_nvm_update_state_str[] = { | |
| "I40E_NVMUPD_INVALID", | |
| "I40E_NVMUPD_READ_CON", | |
| "I40E_NVMUPD_READ_SNT", | |
| "I40E_NVMUPD_READ_LCB", | |
| "I40E_NVMUPD_READ_SA", | |
| "I40E_NVMUPD_WRITE_ERA", | |
| "I40E_NVMUPD_WRITE_CON", | |
| "I40E_NVMUPD_WRITE_SNT", | |
| "I40E_NVMUPD_WRITE_LCB", | |
| "I40E_NVMUPD_WRITE_SA", | |
| "I40E_NVMUPD_CSUM_CON", | |
| "I40E_NVMUPD_CSUM_SA", | |
| "I40E_NVMUPD_CSUM_LCB", | |
| "I40E_NVMUPD_STATUS", | |
| "I40E_NVMUPD_EXEC_AQ", | |
| "I40E_NVMUPD_GET_AQ_RESULT", | |
| }; | |
| /** | |
| * i40e_nvmupd_command - Process an NVM update command | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command | |
| * @bytes: pointer to the data buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * Dispatches command depending on what update state is current | |
| **/ | |
| i40e_status i40e_nvmupd_command(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno) | |
| { | |
| i40e_status status; | |
| enum i40e_nvmupd_cmd upd_cmd; | |
| /* assume success */ | |
| *perrno = 0; | |
| /* early check for status command and debug msgs */ | |
| upd_cmd = i40e_nvmupd_validate_command(hw, cmd, perrno); | |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s state %d nvm_release_on_hold %d opc 0x%04x cmd 0x%08x config 0x%08x offset 0x%08x data_size 0x%08x\n", | |
| i40e_nvm_update_state_str[upd_cmd], | |
| hw->nvmupd_state, | |
| hw->nvm_release_on_done, hw->nvm_wait_opcode, | |
| cmd->command, cmd->config, cmd->offset, cmd->data_size); | |
| if (upd_cmd == I40E_NVMUPD_INVALID) { | |
| *perrno = -EFAULT; | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "i40e_nvmupd_validate_command returns %d errno %d\n", | |
| upd_cmd, *perrno); | |
| } | |
| /* a status request returns immediately rather than | |
| * going into the state machine | |
| */ | |
| if (upd_cmd == I40E_NVMUPD_STATUS) { | |
| if (!cmd->data_size) { | |
| *perrno = -EFAULT; | |
| return I40E_ERR_BUF_TOO_SHORT; | |
| } | |
| bytes[0] = hw->nvmupd_state; | |
| if (cmd->data_size >= 4) { | |
| bytes[1] = 0; | |
| *((u16 *)&bytes[2]) = hw->nvm_wait_opcode; | |
| } | |
| /* Clear error status on read */ | |
| if (hw->nvmupd_state == I40E_NVMUPD_STATE_ERROR) | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; | |
| return 0; | |
| } | |
| /* Clear status even it is not read and log */ | |
| if (hw->nvmupd_state == I40E_NVMUPD_STATE_ERROR) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "Clearing I40E_NVMUPD_STATE_ERROR state without reading\n"); | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; | |
| } | |
| /* Acquire lock to prevent race condition where adminq_task | |
| * can execute after i40e_nvmupd_nvm_read/write but before state | |
| * variables (nvm_wait_opcode, nvm_release_on_done) are updated. | |
| * | |
| * During NVMUpdate, it is observed that lock could be held for | |
| * ~5ms for most commands. However lock is held for ~60ms for | |
| * NVMUPD_CSUM_LCB command. | |
| */ | |
| mutex_lock(&hw->aq.arq_mutex); | |
| switch (hw->nvmupd_state) { | |
| case I40E_NVMUPD_STATE_INIT: | |
| status = i40e_nvmupd_state_init(hw, cmd, bytes, perrno); | |
| break; | |
| case I40E_NVMUPD_STATE_READING: | |
| status = i40e_nvmupd_state_reading(hw, cmd, bytes, perrno); | |
| break; | |
| case I40E_NVMUPD_STATE_WRITING: | |
| status = i40e_nvmupd_state_writing(hw, cmd, bytes, perrno); | |
| break; | |
| case I40E_NVMUPD_STATE_INIT_WAIT: | |
| case I40E_NVMUPD_STATE_WRITE_WAIT: | |
| /* if we need to stop waiting for an event, clear | |
| * the wait info and return before doing anything else | |
| */ | |
| if (cmd->offset == 0xffff) { | |
| i40e_nvmupd_check_wait_event(hw, hw->nvm_wait_opcode); | |
| status = 0; | |
| goto exit; | |
| } | |
| status = I40E_ERR_NOT_READY; | |
| *perrno = -EBUSY; | |
| break; | |
| default: | |
| /* invalid state, should never happen */ | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVMUPD: no such state %d\n", hw->nvmupd_state); | |
| status = I40E_NOT_SUPPORTED; | |
| *perrno = -ESRCH; | |
| break; | |
| } | |
| exit: | |
| mutex_unlock(&hw->aq.arq_mutex); | |
| return status; | |
| } | |
| /** | |
| * i40e_nvmupd_state_init - Handle NVM update state Init | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command buffer | |
| * @bytes: pointer to the data buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * Process legitimate commands of the Init state and conditionally set next | |
| * state. Reject all other commands. | |
| **/ | |
| static i40e_status i40e_nvmupd_state_init(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno) | |
| { | |
| i40e_status status = 0; | |
| enum i40e_nvmupd_cmd upd_cmd; | |
| upd_cmd = i40e_nvmupd_validate_command(hw, cmd, perrno); | |
| switch (upd_cmd) { | |
| case I40E_NVMUPD_READ_SA: | |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); | |
| if (status) { | |
| *perrno = i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status); | |
| } else { | |
| status = i40e_nvmupd_nvm_read(hw, cmd, bytes, perrno); | |
| i40e_release_nvm(hw); | |
| } | |
| break; | |
| case I40E_NVMUPD_READ_SNT: | |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); | |
| if (status) { | |
| *perrno = i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status); | |
| } else { | |
| status = i40e_nvmupd_nvm_read(hw, cmd, bytes, perrno); | |
| if (status) | |
| i40e_release_nvm(hw); | |
| else | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_READING; | |
| } | |
| break; | |
| case I40E_NVMUPD_WRITE_ERA: | |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); | |
| if (status) { | |
| *perrno = i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status); | |
| } else { | |
| status = i40e_nvmupd_nvm_erase(hw, cmd, perrno); | |
| if (status) { | |
| i40e_release_nvm(hw); | |
| } else { | |
| hw->nvm_release_on_done = true; | |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_erase; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; | |
| } | |
| } | |
| break; | |
| case I40E_NVMUPD_WRITE_SA: | |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); | |
| if (status) { | |
| *perrno = i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status); | |
| } else { | |
| status = i40e_nvmupd_nvm_write(hw, cmd, bytes, perrno); | |
| if (status) { | |
| i40e_release_nvm(hw); | |
| } else { | |
| hw->nvm_release_on_done = true; | |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; | |
| } | |
| } | |
| break; | |
| case I40E_NVMUPD_WRITE_SNT: | |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); | |
| if (status) { | |
| *perrno = i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status); | |
| } else { | |
| status = i40e_nvmupd_nvm_write(hw, cmd, bytes, perrno); | |
| if (status) { | |
| i40e_release_nvm(hw); | |
| } else { | |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_WRITE_WAIT; | |
| } | |
| } | |
| break; | |
| case I40E_NVMUPD_CSUM_SA: | |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); | |
| if (status) { | |
| *perrno = i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status); | |
| } else { | |
| status = i40e_update_nvm_checksum(hw); | |
| if (status) { | |
| *perrno = hw->aq.asq_last_status ? | |
| i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status) : | |
| -EIO; | |
| i40e_release_nvm(hw); | |
| } else { | |
| hw->nvm_release_on_done = true; | |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; | |
| } | |
| } | |
| break; | |
| case I40E_NVMUPD_EXEC_AQ: | |
| status = i40e_nvmupd_exec_aq(hw, cmd, bytes, perrno); | |
| break; | |
| case I40E_NVMUPD_GET_AQ_RESULT: | |
| status = i40e_nvmupd_get_aq_result(hw, cmd, bytes, perrno); | |
| break; | |
| default: | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVMUPD: bad cmd %s in init state\n", | |
| i40e_nvm_update_state_str[upd_cmd]); | |
| status = I40E_ERR_NVM; | |
| *perrno = -ESRCH; | |
| break; | |
| } | |
| return status; | |
| } | |
| /** | |
| * i40e_nvmupd_state_reading - Handle NVM update state Reading | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command buffer | |
| * @bytes: pointer to the data buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * NVM ownership is already held. Process legitimate commands and set any | |
| * change in state; reject all other commands. | |
| **/ | |
| static i40e_status i40e_nvmupd_state_reading(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno) | |
| { | |
| i40e_status status = 0; | |
| enum i40e_nvmupd_cmd upd_cmd; | |
| upd_cmd = i40e_nvmupd_validate_command(hw, cmd, perrno); | |
| switch (upd_cmd) { | |
| case I40E_NVMUPD_READ_SA: | |
| case I40E_NVMUPD_READ_CON: | |
| status = i40e_nvmupd_nvm_read(hw, cmd, bytes, perrno); | |
| break; | |
| case I40E_NVMUPD_READ_LCB: | |
| status = i40e_nvmupd_nvm_read(hw, cmd, bytes, perrno); | |
| i40e_release_nvm(hw); | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; | |
| break; | |
| default: | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVMUPD: bad cmd %s in reading state.\n", | |
| i40e_nvm_update_state_str[upd_cmd]); | |
| status = I40E_NOT_SUPPORTED; | |
| *perrno = -ESRCH; | |
| break; | |
| } | |
| return status; | |
| } | |
| /** | |
| * i40e_nvmupd_state_writing - Handle NVM update state Writing | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command buffer | |
| * @bytes: pointer to the data buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * NVM ownership is already held. Process legitimate commands and set any | |
| * change in state; reject all other commands | |
| **/ | |
| static i40e_status i40e_nvmupd_state_writing(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno) | |
| { | |
| i40e_status status = 0; | |
| enum i40e_nvmupd_cmd upd_cmd; | |
| bool retry_attempt = false; | |
| upd_cmd = i40e_nvmupd_validate_command(hw, cmd, perrno); | |
| retry: | |
| switch (upd_cmd) { | |
| case I40E_NVMUPD_WRITE_CON: | |
| status = i40e_nvmupd_nvm_write(hw, cmd, bytes, perrno); | |
| if (!status) { | |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_WRITE_WAIT; | |
| } | |
| break; | |
| case I40E_NVMUPD_WRITE_LCB: | |
| status = i40e_nvmupd_nvm_write(hw, cmd, bytes, perrno); | |
| if (status) { | |
| *perrno = hw->aq.asq_last_status ? | |
| i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status) : | |
| -EIO; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; | |
| } else { | |
| hw->nvm_release_on_done = true; | |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; | |
| } | |
| break; | |
| case I40E_NVMUPD_CSUM_CON: | |
| /* Assumes the caller has acquired the nvm */ | |
| status = i40e_update_nvm_checksum(hw); | |
| if (status) { | |
| *perrno = hw->aq.asq_last_status ? | |
| i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status) : | |
| -EIO; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; | |
| } else { | |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_WRITE_WAIT; | |
| } | |
| break; | |
| case I40E_NVMUPD_CSUM_LCB: | |
| /* Assumes the caller has acquired the nvm */ | |
| status = i40e_update_nvm_checksum(hw); | |
| if (status) { | |
| *perrno = hw->aq.asq_last_status ? | |
| i40e_aq_rc_to_posix(status, | |
| hw->aq.asq_last_status) : | |
| -EIO; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; | |
| } else { | |
| hw->nvm_release_on_done = true; | |
| hw->nvm_wait_opcode = i40e_aqc_opc_nvm_update; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; | |
| } | |
| break; | |
| default: | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVMUPD: bad cmd %s in writing state.\n", | |
| i40e_nvm_update_state_str[upd_cmd]); | |
| status = I40E_NOT_SUPPORTED; | |
| *perrno = -ESRCH; | |
| break; | |
| } | |
| /* In some circumstances, a multi-write transaction takes longer | |
| * than the default 3 minute timeout on the write semaphore. If | |
| * the write failed with an EBUSY status, this is likely the problem, | |
| * so here we try to reacquire the semaphore then retry the write. | |
| * We only do one retry, then give up. | |
| */ | |
| if (status && (hw->aq.asq_last_status == I40E_AQ_RC_EBUSY) && | |
| !retry_attempt) { | |
| i40e_status old_status = status; | |
| u32 old_asq_status = hw->aq.asq_last_status; | |
| u32 gtime; | |
| gtime = rd32(hw, I40E_GLVFGEN_TIMER); | |
| if (gtime >= hw->nvm.hw_semaphore_timeout) { | |
| i40e_debug(hw, I40E_DEBUG_ALL, | |
| "NVMUPD: write semaphore expired (%d >= %lld), retrying\n", | |
| gtime, hw->nvm.hw_semaphore_timeout); | |
| i40e_release_nvm(hw); | |
| status = i40e_acquire_nvm(hw, I40E_RESOURCE_WRITE); | |
| if (status) { | |
| i40e_debug(hw, I40E_DEBUG_ALL, | |
| "NVMUPD: write semaphore reacquire failed aq_err = %d\n", | |
| hw->aq.asq_last_status); | |
| status = old_status; | |
| hw->aq.asq_last_status = old_asq_status; | |
| } else { | |
| retry_attempt = true; | |
| goto retry; | |
| } | |
| } | |
| } | |
| return status; | |
| } | |
| /** | |
| * i40e_nvmupd_check_wait_event - handle NVM update operation events | |
| * @hw: pointer to the hardware structure | |
| * @opcode: the event that just happened | |
| **/ | |
| void i40e_nvmupd_check_wait_event(struct i40e_hw *hw, u16 opcode) | |
| { | |
| if (opcode == hw->nvm_wait_opcode) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVMUPD: clearing wait on opcode 0x%04x\n", opcode); | |
| if (hw->nvm_release_on_done) { | |
| i40e_release_nvm(hw); | |
| hw->nvm_release_on_done = false; | |
| } | |
| hw->nvm_wait_opcode = 0; | |
| if (hw->aq.arq_last_status) { | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_ERROR; | |
| return; | |
| } | |
| switch (hw->nvmupd_state) { | |
| case I40E_NVMUPD_STATE_INIT_WAIT: | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; | |
| break; | |
| case I40E_NVMUPD_STATE_WRITE_WAIT: | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_WRITING; | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| } | |
| /** | |
| * i40e_nvmupd_validate_command - Validate given command | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * Return one of the valid command types or I40E_NVMUPD_INVALID | |
| **/ | |
| static enum i40e_nvmupd_cmd i40e_nvmupd_validate_command(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| int *perrno) | |
| { | |
| enum i40e_nvmupd_cmd upd_cmd; | |
| u8 module, transaction; | |
| /* anything that doesn't match a recognized case is an error */ | |
| upd_cmd = I40E_NVMUPD_INVALID; | |
| transaction = i40e_nvmupd_get_transaction(cmd->config); | |
| module = i40e_nvmupd_get_module(cmd->config); | |
| /* limits on data size */ | |
| if ((cmd->data_size < 1) || | |
| (cmd->data_size > I40E_NVMUPD_MAX_DATA)) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "i40e_nvmupd_validate_command data_size %d\n", | |
| cmd->data_size); | |
| *perrno = -EFAULT; | |
| return I40E_NVMUPD_INVALID; | |
| } | |
| switch (cmd->command) { | |
| case I40E_NVM_READ: | |
| switch (transaction) { | |
| case I40E_NVM_CON: | |
| upd_cmd = I40E_NVMUPD_READ_CON; | |
| break; | |
| case I40E_NVM_SNT: | |
| upd_cmd = I40E_NVMUPD_READ_SNT; | |
| break; | |
| case I40E_NVM_LCB: | |
| upd_cmd = I40E_NVMUPD_READ_LCB; | |
| break; | |
| case I40E_NVM_SA: | |
| upd_cmd = I40E_NVMUPD_READ_SA; | |
| break; | |
| case I40E_NVM_EXEC: | |
| if (module == 0xf) | |
| upd_cmd = I40E_NVMUPD_STATUS; | |
| else if (module == 0) | |
| upd_cmd = I40E_NVMUPD_GET_AQ_RESULT; | |
| break; | |
| } | |
| break; | |
| case I40E_NVM_WRITE: | |
| switch (transaction) { | |
| case I40E_NVM_CON: | |
| upd_cmd = I40E_NVMUPD_WRITE_CON; | |
| break; | |
| case I40E_NVM_SNT: | |
| upd_cmd = I40E_NVMUPD_WRITE_SNT; | |
| break; | |
| case I40E_NVM_LCB: | |
| upd_cmd = I40E_NVMUPD_WRITE_LCB; | |
| break; | |
| case I40E_NVM_SA: | |
| upd_cmd = I40E_NVMUPD_WRITE_SA; | |
| break; | |
| case I40E_NVM_ERA: | |
| upd_cmd = I40E_NVMUPD_WRITE_ERA; | |
| break; | |
| case I40E_NVM_CSUM: | |
| upd_cmd = I40E_NVMUPD_CSUM_CON; | |
| break; | |
| case (I40E_NVM_CSUM|I40E_NVM_SA): | |
| upd_cmd = I40E_NVMUPD_CSUM_SA; | |
| break; | |
| case (I40E_NVM_CSUM|I40E_NVM_LCB): | |
| upd_cmd = I40E_NVMUPD_CSUM_LCB; | |
| break; | |
| case I40E_NVM_EXEC: | |
| if (module == 0) | |
| upd_cmd = I40E_NVMUPD_EXEC_AQ; | |
| break; | |
| } | |
| break; | |
| } | |
| return upd_cmd; | |
| } | |
| /** | |
| * i40e_nvmupd_exec_aq - Run an AQ command | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command buffer | |
| * @bytes: pointer to the data buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * cmd structure contains identifiers and data buffer | |
| **/ | |
| static i40e_status i40e_nvmupd_exec_aq(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno) | |
| { | |
| struct i40e_asq_cmd_details cmd_details; | |
| i40e_status status; | |
| struct i40e_aq_desc *aq_desc; | |
| u32 buff_size = 0; | |
| u8 *buff = NULL; | |
| u32 aq_desc_len; | |
| u32 aq_data_len; | |
| i40e_debug(hw, I40E_DEBUG_NVM, "NVMUPD: %s\n", __func__); | |
| memset(&cmd_details, 0, sizeof(cmd_details)); | |
| cmd_details.wb_desc = &hw->nvm_wb_desc; | |
| aq_desc_len = sizeof(struct i40e_aq_desc); | |
| memset(&hw->nvm_wb_desc, 0, aq_desc_len); | |
| /* get the aq descriptor */ | |
| if (cmd->data_size < aq_desc_len) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVMUPD: not enough aq desc bytes for exec, size %d < %d\n", | |
| cmd->data_size, aq_desc_len); | |
| *perrno = -EINVAL; | |
| return I40E_ERR_PARAM; | |
| } | |
| aq_desc = (struct i40e_aq_desc *)bytes; | |
| /* if data buffer needed, make sure it's ready */ | |
| aq_data_len = cmd->data_size - aq_desc_len; | |
| buff_size = max_t(u32, aq_data_len, le16_to_cpu(aq_desc->datalen)); | |
| if (buff_size) { | |
| if (!hw->nvm_buff.va) { | |
| status = i40e_allocate_virt_mem(hw, &hw->nvm_buff, | |
| hw->aq.asq_buf_size); | |
| if (status) | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "NVMUPD: i40e_allocate_virt_mem for exec buff failed, %d\n", | |
| status); | |
| } | |
| if (hw->nvm_buff.va) { | |
| buff = hw->nvm_buff.va; | |
| memcpy(buff, &bytes[aq_desc_len], aq_data_len); | |
| } | |
| } | |
| /* and away we go! */ | |
| status = i40e_asq_send_command(hw, aq_desc, buff, | |
| buff_size, &cmd_details); | |
| if (status) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "i40e_nvmupd_exec_aq err %s aq_err %s\n", | |
| i40e_stat_str(hw, status), | |
| i40e_aq_str(hw, hw->aq.asq_last_status)); | |
| *perrno = i40e_aq_rc_to_posix(status, hw->aq.asq_last_status); | |
| } | |
| /* should we wait for a followup event? */ | |
| if (cmd->offset) { | |
| hw->nvm_wait_opcode = cmd->offset; | |
| hw->nvmupd_state = I40E_NVMUPD_STATE_INIT_WAIT; | |
| } | |
| return status; | |
| } | |
| /** | |
| * i40e_nvmupd_get_aq_result - Get the results from the previous exec_aq | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command buffer | |
| * @bytes: pointer to the data buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * cmd structure contains identifiers and data buffer | |
| **/ | |
| static i40e_status i40e_nvmupd_get_aq_result(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno) | |
| { | |
| u32 aq_total_len; | |
| u32 aq_desc_len; | |
| int remainder; | |
| u8 *buff; | |
| i40e_debug(hw, I40E_DEBUG_NVM, "NVMUPD: %s\n", __func__); | |
| aq_desc_len = sizeof(struct i40e_aq_desc); | |
| aq_total_len = aq_desc_len + le16_to_cpu(hw->nvm_wb_desc.datalen); | |
| /* check offset range */ | |
| if (cmd->offset > aq_total_len) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s: offset too big %d > %d\n", | |
| __func__, cmd->offset, aq_total_len); | |
| *perrno = -EINVAL; | |
| return I40E_ERR_PARAM; | |
| } | |
| /* check copylength range */ | |
| if (cmd->data_size > (aq_total_len - cmd->offset)) { | |
| int new_len = aq_total_len - cmd->offset; | |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s: copy length %d too big, trimming to %d\n", | |
| __func__, cmd->data_size, new_len); | |
| cmd->data_size = new_len; | |
| } | |
| remainder = cmd->data_size; | |
| if (cmd->offset < aq_desc_len) { | |
| u32 len = aq_desc_len - cmd->offset; | |
| len = min(len, cmd->data_size); | |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s: aq_desc bytes %d to %d\n", | |
| __func__, cmd->offset, cmd->offset + len); | |
| buff = ((u8 *)&hw->nvm_wb_desc) + cmd->offset; | |
| memcpy(bytes, buff, len); | |
| bytes += len; | |
| remainder -= len; | |
| buff = hw->nvm_buff.va; | |
| } else { | |
| buff = hw->nvm_buff.va + (cmd->offset - aq_desc_len); | |
| } | |
| if (remainder > 0) { | |
| int start_byte = buff - (u8 *)hw->nvm_buff.va; | |
| i40e_debug(hw, I40E_DEBUG_NVM, "%s: databuf bytes %d to %d\n", | |
| __func__, start_byte, start_byte + remainder); | |
| memcpy(bytes, buff, remainder); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * i40e_nvmupd_nvm_read - Read NVM | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command buffer | |
| * @bytes: pointer to the data buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * cmd structure contains identifiers and data buffer | |
| **/ | |
| static i40e_status i40e_nvmupd_nvm_read(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno) | |
| { | |
| struct i40e_asq_cmd_details cmd_details; | |
| i40e_status status; | |
| u8 module, transaction; | |
| bool last; | |
| transaction = i40e_nvmupd_get_transaction(cmd->config); | |
| module = i40e_nvmupd_get_module(cmd->config); | |
| last = (transaction == I40E_NVM_LCB) || (transaction == I40E_NVM_SA); | |
| memset(&cmd_details, 0, sizeof(cmd_details)); | |
| cmd_details.wb_desc = &hw->nvm_wb_desc; | |
| status = i40e_aq_read_nvm(hw, module, cmd->offset, (u16)cmd->data_size, | |
| bytes, last, &cmd_details); | |
| if (status) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "i40e_nvmupd_nvm_read mod 0x%x off 0x%x len 0x%x\n", | |
| module, cmd->offset, cmd->data_size); | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "i40e_nvmupd_nvm_read status %d aq %d\n", | |
| status, hw->aq.asq_last_status); | |
| *perrno = i40e_aq_rc_to_posix(status, hw->aq.asq_last_status); | |
| } | |
| return status; | |
| } | |
| /** | |
| * i40e_nvmupd_nvm_erase - Erase an NVM module | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * module, offset, data_size and data are in cmd structure | |
| **/ | |
| static i40e_status i40e_nvmupd_nvm_erase(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| int *perrno) | |
| { | |
| i40e_status status = 0; | |
| struct i40e_asq_cmd_details cmd_details; | |
| u8 module, transaction; | |
| bool last; | |
| transaction = i40e_nvmupd_get_transaction(cmd->config); | |
| module = i40e_nvmupd_get_module(cmd->config); | |
| last = (transaction & I40E_NVM_LCB); | |
| memset(&cmd_details, 0, sizeof(cmd_details)); | |
| cmd_details.wb_desc = &hw->nvm_wb_desc; | |
| status = i40e_aq_erase_nvm(hw, module, cmd->offset, (u16)cmd->data_size, | |
| last, &cmd_details); | |
| if (status) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "i40e_nvmupd_nvm_erase mod 0x%x off 0x%x len 0x%x\n", | |
| module, cmd->offset, cmd->data_size); | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "i40e_nvmupd_nvm_erase status %d aq %d\n", | |
| status, hw->aq.asq_last_status); | |
| *perrno = i40e_aq_rc_to_posix(status, hw->aq.asq_last_status); | |
| } | |
| return status; | |
| } | |
| /** | |
| * i40e_nvmupd_nvm_write - Write NVM | |
| * @hw: pointer to hardware structure | |
| * @cmd: pointer to nvm update command buffer | |
| * @bytes: pointer to the data buffer | |
| * @perrno: pointer to return error code | |
| * | |
| * module, offset, data_size and data are in cmd structure | |
| **/ | |
| static i40e_status i40e_nvmupd_nvm_write(struct i40e_hw *hw, | |
| struct i40e_nvm_access *cmd, | |
| u8 *bytes, int *perrno) | |
| { | |
| i40e_status status = 0; | |
| struct i40e_asq_cmd_details cmd_details; | |
| u8 module, transaction; | |
| bool last; | |
| transaction = i40e_nvmupd_get_transaction(cmd->config); | |
| module = i40e_nvmupd_get_module(cmd->config); | |
| last = (transaction & I40E_NVM_LCB); | |
| memset(&cmd_details, 0, sizeof(cmd_details)); | |
| cmd_details.wb_desc = &hw->nvm_wb_desc; | |
| status = i40e_aq_update_nvm(hw, module, cmd->offset, | |
| (u16)cmd->data_size, bytes, last, | |
| &cmd_details); | |
| if (status) { | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "i40e_nvmupd_nvm_write mod 0x%x off 0x%x len 0x%x\n", | |
| module, cmd->offset, cmd->data_size); | |
| i40e_debug(hw, I40E_DEBUG_NVM, | |
| "i40e_nvmupd_nvm_write status %d aq %d\n", | |
| status, hw->aq.asq_last_status); | |
| *perrno = i40e_aq_rc_to_posix(status, hw->aq.asq_last_status); | |
| } | |
| return status; | |
| } |