| /******************************************************************************* | |
| Intel 10 Gigabit PCI Express Linux driver | |
| Copyright(c) 1999 - 2016 Intel Corporation. | |
| This program is free software; you can redistribute it and/or modify it | |
| under the terms and conditions of the GNU General Public License, | |
| version 2, as published by the Free Software Foundation. | |
| This program is distributed in the hope it will be useful, but WITHOUT | |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| more details. | |
| You should have received a copy of the GNU General Public License along with | |
| this program; if not, write to the Free Software Foundation, Inc., | |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
| The full GNU General Public License is included in this distribution in | |
| the file called "COPYING". | |
| Contact Information: | |
| Linux NICS <linux.nics@intel.com> | |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
| *******************************************************************************/ | |
| #include <linux/types.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/string.h> | |
| #include <linux/in.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ip.h> | |
| #include <linux/tcp.h> | |
| #include <linux/sctp.h> | |
| #include <linux/pkt_sched.h> | |
| #include <linux/ipv6.h> | |
| #include <linux/slab.h> | |
| #include <net/checksum.h> | |
| #include <net/ip6_checksum.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/if.h> | |
| #include <linux/if_vlan.h> | |
| #include <linux/if_macvlan.h> | |
| #include <linux/if_bridge.h> | |
| #include <linux/prefetch.h> | |
| #include <linux/bpf.h> | |
| #include <linux/bpf_trace.h> | |
| #include <linux/atomic.h> | |
| #include <scsi/fc/fc_fcoe.h> | |
| #include <net/udp_tunnel.h> | |
| #include <net/pkt_cls.h> | |
| #include <net/tc_act/tc_gact.h> | |
| #include <net/tc_act/tc_mirred.h> | |
| #include <net/vxlan.h> | |
| #include <net/mpls.h> | |
| #include "ixgbe.h" | |
| #include "ixgbe_common.h" | |
| #include "ixgbe_dcb_82599.h" | |
| #include "ixgbe_sriov.h" | |
| #include "ixgbe_model.h" | |
| char ixgbe_driver_name[] = "ixgbe"; | |
| static const char ixgbe_driver_string[] = | |
| "Intel(R) 10 Gigabit PCI Express Network Driver"; | |
| #ifdef IXGBE_FCOE | |
| char ixgbe_default_device_descr[] = | |
| "Intel(R) 10 Gigabit Network Connection"; | |
| #else | |
| static char ixgbe_default_device_descr[] = | |
| "Intel(R) 10 Gigabit Network Connection"; | |
| #endif | |
| #define DRV_VERSION "5.1.0-k" | |
| const char ixgbe_driver_version[] = DRV_VERSION; | |
| static const char ixgbe_copyright[] = | |
| "Copyright (c) 1999-2016 Intel Corporation."; | |
| static const char ixgbe_overheat_msg[] = "Network adapter has been stopped because it has over heated. Restart the computer. If the problem persists, power off the system and replace the adapter"; | |
| static const struct ixgbe_info *ixgbe_info_tbl[] = { | |
| [board_82598] = &ixgbe_82598_info, | |
| [board_82599] = &ixgbe_82599_info, | |
| [board_X540] = &ixgbe_X540_info, | |
| [board_X550] = &ixgbe_X550_info, | |
| [board_X550EM_x] = &ixgbe_X550EM_x_info, | |
| [board_x550em_x_fw] = &ixgbe_x550em_x_fw_info, | |
| [board_x550em_a] = &ixgbe_x550em_a_info, | |
| [board_x550em_a_fw] = &ixgbe_x550em_a_fw_info, | |
| }; | |
| /* ixgbe_pci_tbl - PCI Device ID Table | |
| * | |
| * Wildcard entries (PCI_ANY_ID) should come last | |
| * Last entry must be all 0s | |
| * | |
| * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, | |
| * Class, Class Mask, private data (not used) } | |
| */ | |
| static const struct pci_device_id ixgbe_pci_tbl[] = { | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX), board_82598 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KR), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T), board_X540 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_QSFP_SF_QP), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T1), board_X540 }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550T), board_X550}, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550T1), board_X550}, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KX4), board_X550EM_x}, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_XFI), board_X550EM_x}, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KR), board_X550EM_x}, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_10G_T), board_X550EM_x}, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_SFP), board_X550EM_x}, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_1G_T), board_x550em_x_fw}, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_KR), board_x550em_a }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_KR_L), board_x550em_a }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SFP_N), board_x550em_a }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SGMII), board_x550em_a }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SGMII_L), board_x550em_a }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_10G_T), board_x550em_a}, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SFP), board_x550em_a }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_1G_T), board_x550em_a_fw }, | |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_1G_T_L), board_x550em_a_fw }, | |
| /* required last entry */ | |
| {0, } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl); | |
| #ifdef CONFIG_IXGBE_DCA | |
| static int ixgbe_notify_dca(struct notifier_block *, unsigned long event, | |
| void *p); | |
| static struct notifier_block dca_notifier = { | |
| .notifier_call = ixgbe_notify_dca, | |
| .next = NULL, | |
| .priority = 0 | |
| }; | |
| #endif | |
| #ifdef CONFIG_PCI_IOV | |
| static unsigned int max_vfs; | |
| module_param(max_vfs, uint, 0); | |
| MODULE_PARM_DESC(max_vfs, | |
| "Maximum number of virtual functions to allocate per physical function - default is zero and maximum value is 63. (Deprecated)"); | |
| #endif /* CONFIG_PCI_IOV */ | |
| static unsigned int allow_unsupported_sfp; | |
| module_param(allow_unsupported_sfp, uint, 0); | |
| MODULE_PARM_DESC(allow_unsupported_sfp, | |
| "Allow unsupported and untested SFP+ modules on 82599-based adapters"); | |
| #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) | |
| static int debug = -1; | |
| module_param(debug, int, 0); | |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); | |
| MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); | |
| MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION(DRV_VERSION); | |
| static struct workqueue_struct *ixgbe_wq; | |
| static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev); | |
| static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *); | |
| static int ixgbe_read_pci_cfg_word_parent(struct ixgbe_adapter *adapter, | |
| u32 reg, u16 *value) | |
| { | |
| struct pci_dev *parent_dev; | |
| struct pci_bus *parent_bus; | |
| parent_bus = adapter->pdev->bus->parent; | |
| if (!parent_bus) | |
| return -1; | |
| parent_dev = parent_bus->self; | |
| if (!parent_dev) | |
| return -1; | |
| if (!pci_is_pcie(parent_dev)) | |
| return -1; | |
| pcie_capability_read_word(parent_dev, reg, value); | |
| if (*value == IXGBE_FAILED_READ_CFG_WORD && | |
| ixgbe_check_cfg_remove(&adapter->hw, parent_dev)) | |
| return -1; | |
| return 0; | |
| } | |
| static s32 ixgbe_get_parent_bus_info(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u16 link_status = 0; | |
| int err; | |
| hw->bus.type = ixgbe_bus_type_pci_express; | |
| /* Get the negotiated link width and speed from PCI config space of the | |
| * parent, as this device is behind a switch | |
| */ | |
| err = ixgbe_read_pci_cfg_word_parent(adapter, 18, &link_status); | |
| /* assume caller will handle error case */ | |
| if (err) | |
| return err; | |
| hw->bus.width = ixgbe_convert_bus_width(link_status); | |
| hw->bus.speed = ixgbe_convert_bus_speed(link_status); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_check_from_parent - Determine whether PCIe info should come from parent | |
| * @hw: hw specific details | |
| * | |
| * This function is used by probe to determine whether a device's PCI-Express | |
| * bandwidth details should be gathered from the parent bus instead of from the | |
| * device. Used to ensure that various locations all have the correct device ID | |
| * checks. | |
| */ | |
| static inline bool ixgbe_pcie_from_parent(struct ixgbe_hw *hw) | |
| { | |
| switch (hw->device_id) { | |
| case IXGBE_DEV_ID_82599_SFP_SF_QP: | |
| case IXGBE_DEV_ID_82599_QSFP_SF_QP: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter, | |
| int expected_gts) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int max_gts = 0; | |
| enum pci_bus_speed speed = PCI_SPEED_UNKNOWN; | |
| enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN; | |
| struct pci_dev *pdev; | |
| /* Some devices are not connected over PCIe and thus do not negotiate | |
| * speed. These devices do not have valid bus info, and thus any report | |
| * we generate may not be correct. | |
| */ | |
| if (hw->bus.type == ixgbe_bus_type_internal) | |
| return; | |
| /* determine whether to use the parent device */ | |
| if (ixgbe_pcie_from_parent(&adapter->hw)) | |
| pdev = adapter->pdev->bus->parent->self; | |
| else | |
| pdev = adapter->pdev; | |
| if (pcie_get_minimum_link(pdev, &speed, &width) || | |
| speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) { | |
| e_dev_warn("Unable to determine PCI Express bandwidth.\n"); | |
| return; | |
| } | |
| switch (speed) { | |
| case PCIE_SPEED_2_5GT: | |
| /* 8b/10b encoding reduces max throughput by 20% */ | |
| max_gts = 2 * width; | |
| break; | |
| case PCIE_SPEED_5_0GT: | |
| /* 8b/10b encoding reduces max throughput by 20% */ | |
| max_gts = 4 * width; | |
| break; | |
| case PCIE_SPEED_8_0GT: | |
| /* 128b/130b encoding reduces throughput by less than 2% */ | |
| max_gts = 8 * width; | |
| break; | |
| default: | |
| e_dev_warn("Unable to determine PCI Express bandwidth.\n"); | |
| return; | |
| } | |
| e_dev_info("PCI Express bandwidth of %dGT/s available\n", | |
| max_gts); | |
| e_dev_info("(Speed:%s, Width: x%d, Encoding Loss:%s)\n", | |
| (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" : | |
| speed == PCIE_SPEED_5_0GT ? "5.0GT/s" : | |
| speed == PCIE_SPEED_2_5GT ? "2.5GT/s" : | |
| "Unknown"), | |
| width, | |
| (speed == PCIE_SPEED_2_5GT ? "20%" : | |
| speed == PCIE_SPEED_5_0GT ? "20%" : | |
| speed == PCIE_SPEED_8_0GT ? "<2%" : | |
| "Unknown")); | |
| if (max_gts < expected_gts) { | |
| e_dev_warn("This is not sufficient for optimal performance of this card.\n"); | |
| e_dev_warn("For optimal performance, at least %dGT/s of bandwidth is required.\n", | |
| expected_gts); | |
| e_dev_warn("A slot with more lanes and/or higher speed is suggested.\n"); | |
| } | |
| } | |
| static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter) | |
| { | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state) && | |
| !test_bit(__IXGBE_REMOVING, &adapter->state) && | |
| !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state)) | |
| queue_work(ixgbe_wq, &adapter->service_task); | |
| } | |
| static void ixgbe_remove_adapter(struct ixgbe_hw *hw) | |
| { | |
| struct ixgbe_adapter *adapter = hw->back; | |
| if (!hw->hw_addr) | |
| return; | |
| hw->hw_addr = NULL; | |
| e_dev_err("Adapter removed\n"); | |
| if (test_bit(__IXGBE_SERVICE_INITED, &adapter->state)) | |
| ixgbe_service_event_schedule(adapter); | |
| } | |
| static void ixgbe_check_remove(struct ixgbe_hw *hw, u32 reg) | |
| { | |
| u32 value; | |
| /* The following check not only optimizes a bit by not | |
| * performing a read on the status register when the | |
| * register just read was a status register read that | |
| * returned IXGBE_FAILED_READ_REG. It also blocks any | |
| * potential recursion. | |
| */ | |
| if (reg == IXGBE_STATUS) { | |
| ixgbe_remove_adapter(hw); | |
| return; | |
| } | |
| value = ixgbe_read_reg(hw, IXGBE_STATUS); | |
| if (value == IXGBE_FAILED_READ_REG) | |
| ixgbe_remove_adapter(hw); | |
| } | |
| /** | |
| * ixgbe_read_reg - Read from device register | |
| * @hw: hw specific details | |
| * @reg: offset of register to read | |
| * | |
| * Returns : value read or IXGBE_FAILED_READ_REG if removed | |
| * | |
| * This function is used to read device registers. It checks for device | |
| * removal by confirming any read that returns all ones by checking the | |
| * status register value for all ones. This function avoids reading from | |
| * the hardware if a removal was previously detected in which case it | |
| * returns IXGBE_FAILED_READ_REG (all ones). | |
| */ | |
| u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg) | |
| { | |
| u8 __iomem *reg_addr = READ_ONCE(hw->hw_addr); | |
| u32 value; | |
| if (ixgbe_removed(reg_addr)) | |
| return IXGBE_FAILED_READ_REG; | |
| if (unlikely(hw->phy.nw_mng_if_sel & | |
| IXGBE_NW_MNG_IF_SEL_SGMII_ENABLE)) { | |
| struct ixgbe_adapter *adapter; | |
| int i; | |
| for (i = 0; i < 200; ++i) { | |
| value = readl(reg_addr + IXGBE_MAC_SGMII_BUSY); | |
| if (likely(!value)) | |
| goto writes_completed; | |
| if (value == IXGBE_FAILED_READ_REG) { | |
| ixgbe_remove_adapter(hw); | |
| return IXGBE_FAILED_READ_REG; | |
| } | |
| udelay(5); | |
| } | |
| adapter = hw->back; | |
| e_warn(hw, "register writes incomplete %08x\n", value); | |
| } | |
| writes_completed: | |
| value = readl(reg_addr + reg); | |
| if (unlikely(value == IXGBE_FAILED_READ_REG)) | |
| ixgbe_check_remove(hw, reg); | |
| return value; | |
| } | |
| static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev) | |
| { | |
| u16 value; | |
| pci_read_config_word(pdev, PCI_VENDOR_ID, &value); | |
| if (value == IXGBE_FAILED_READ_CFG_WORD) { | |
| ixgbe_remove_adapter(hw); | |
| return true; | |
| } | |
| return false; | |
| } | |
| u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg) | |
| { | |
| struct ixgbe_adapter *adapter = hw->back; | |
| u16 value; | |
| if (ixgbe_removed(hw->hw_addr)) | |
| return IXGBE_FAILED_READ_CFG_WORD; | |
| pci_read_config_word(adapter->pdev, reg, &value); | |
| if (value == IXGBE_FAILED_READ_CFG_WORD && | |
| ixgbe_check_cfg_remove(hw, adapter->pdev)) | |
| return IXGBE_FAILED_READ_CFG_WORD; | |
| return value; | |
| } | |
| #ifdef CONFIG_PCI_IOV | |
| static u32 ixgbe_read_pci_cfg_dword(struct ixgbe_hw *hw, u32 reg) | |
| { | |
| struct ixgbe_adapter *adapter = hw->back; | |
| u32 value; | |
| if (ixgbe_removed(hw->hw_addr)) | |
| return IXGBE_FAILED_READ_CFG_DWORD; | |
| pci_read_config_dword(adapter->pdev, reg, &value); | |
| if (value == IXGBE_FAILED_READ_CFG_DWORD && | |
| ixgbe_check_cfg_remove(hw, adapter->pdev)) | |
| return IXGBE_FAILED_READ_CFG_DWORD; | |
| return value; | |
| } | |
| #endif /* CONFIG_PCI_IOV */ | |
| void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value) | |
| { | |
| struct ixgbe_adapter *adapter = hw->back; | |
| if (ixgbe_removed(hw->hw_addr)) | |
| return; | |
| pci_write_config_word(adapter->pdev, reg, value); | |
| } | |
| static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter) | |
| { | |
| BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state)); | |
| /* flush memory to make sure state is correct before next watchdog */ | |
| smp_mb__before_atomic(); | |
| clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); | |
| } | |
| struct ixgbe_reg_info { | |
| u32 ofs; | |
| char *name; | |
| }; | |
| static const struct ixgbe_reg_info ixgbe_reg_info_tbl[] = { | |
| /* General Registers */ | |
| {IXGBE_CTRL, "CTRL"}, | |
| {IXGBE_STATUS, "STATUS"}, | |
| {IXGBE_CTRL_EXT, "CTRL_EXT"}, | |
| /* Interrupt Registers */ | |
| {IXGBE_EICR, "EICR"}, | |
| /* RX Registers */ | |
| {IXGBE_SRRCTL(0), "SRRCTL"}, | |
| {IXGBE_DCA_RXCTRL(0), "DRXCTL"}, | |
| {IXGBE_RDLEN(0), "RDLEN"}, | |
| {IXGBE_RDH(0), "RDH"}, | |
| {IXGBE_RDT(0), "RDT"}, | |
| {IXGBE_RXDCTL(0), "RXDCTL"}, | |
| {IXGBE_RDBAL(0), "RDBAL"}, | |
| {IXGBE_RDBAH(0), "RDBAH"}, | |
| /* TX Registers */ | |
| {IXGBE_TDBAL(0), "TDBAL"}, | |
| {IXGBE_TDBAH(0), "TDBAH"}, | |
| {IXGBE_TDLEN(0), "TDLEN"}, | |
| {IXGBE_TDH(0), "TDH"}, | |
| {IXGBE_TDT(0), "TDT"}, | |
| {IXGBE_TXDCTL(0), "TXDCTL"}, | |
| /* List Terminator */ | |
| { .name = NULL } | |
| }; | |
| /* | |
| * ixgbe_regdump - register printout routine | |
| */ | |
| static void ixgbe_regdump(struct ixgbe_hw *hw, struct ixgbe_reg_info *reginfo) | |
| { | |
| int i; | |
| char rname[16]; | |
| u32 regs[64]; | |
| switch (reginfo->ofs) { | |
| case IXGBE_SRRCTL(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i)); | |
| break; | |
| case IXGBE_DCA_RXCTRL(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); | |
| break; | |
| case IXGBE_RDLEN(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i)); | |
| break; | |
| case IXGBE_RDH(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDH(i)); | |
| break; | |
| case IXGBE_RDT(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDT(i)); | |
| break; | |
| case IXGBE_RXDCTL(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); | |
| break; | |
| case IXGBE_RDBAL(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i)); | |
| break; | |
| case IXGBE_RDBAH(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i)); | |
| break; | |
| case IXGBE_TDBAL(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i)); | |
| break; | |
| case IXGBE_TDBAH(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i)); | |
| break; | |
| case IXGBE_TDLEN(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i)); | |
| break; | |
| case IXGBE_TDH(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDH(i)); | |
| break; | |
| case IXGBE_TDT(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDT(i)); | |
| break; | |
| case IXGBE_TXDCTL(0): | |
| for (i = 0; i < 64; i++) | |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); | |
| break; | |
| default: | |
| pr_info("%-15s %08x\n", | |
| reginfo->name, IXGBE_READ_REG(hw, reginfo->ofs)); | |
| return; | |
| } | |
| i = 0; | |
| while (i < 64) { | |
| int j; | |
| char buf[9 * 8 + 1]; | |
| char *p = buf; | |
| snprintf(rname, 16, "%s[%d-%d]", reginfo->name, i, i + 7); | |
| for (j = 0; j < 8; j++) | |
| p += sprintf(p, " %08x", regs[i++]); | |
| pr_err("%-15s%s\n", rname, buf); | |
| } | |
| } | |
| static void ixgbe_print_buffer(struct ixgbe_ring *ring, int n) | |
| { | |
| struct ixgbe_tx_buffer *tx_buffer; | |
| tx_buffer = &ring->tx_buffer_info[ring->next_to_clean]; | |
| pr_info(" %5d %5X %5X %016llX %08X %p %016llX\n", | |
| n, ring->next_to_use, ring->next_to_clean, | |
| (u64)dma_unmap_addr(tx_buffer, dma), | |
| dma_unmap_len(tx_buffer, len), | |
| tx_buffer->next_to_watch, | |
| (u64)tx_buffer->time_stamp); | |
| } | |
| /* | |
| * ixgbe_dump - Print registers, tx-rings and rx-rings | |
| */ | |
| static void ixgbe_dump(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct ixgbe_reg_info *reginfo; | |
| int n = 0; | |
| struct ixgbe_ring *ring; | |
| struct ixgbe_tx_buffer *tx_buffer; | |
| union ixgbe_adv_tx_desc *tx_desc; | |
| struct my_u0 { u64 a; u64 b; } *u0; | |
| struct ixgbe_ring *rx_ring; | |
| union ixgbe_adv_rx_desc *rx_desc; | |
| struct ixgbe_rx_buffer *rx_buffer_info; | |
| int i = 0; | |
| if (!netif_msg_hw(adapter)) | |
| return; | |
| /* Print netdevice Info */ | |
| if (netdev) { | |
| dev_info(&adapter->pdev->dev, "Net device Info\n"); | |
| pr_info("Device Name state " | |
| "trans_start\n"); | |
| pr_info("%-15s %016lX %016lX\n", | |
| netdev->name, | |
| netdev->state, | |
| dev_trans_start(netdev)); | |
| } | |
| /* Print Registers */ | |
| dev_info(&adapter->pdev->dev, "Register Dump\n"); | |
| pr_info(" Register Name Value\n"); | |
| for (reginfo = (struct ixgbe_reg_info *)ixgbe_reg_info_tbl; | |
| reginfo->name; reginfo++) { | |
| ixgbe_regdump(hw, reginfo); | |
| } | |
| /* Print TX Ring Summary */ | |
| if (!netdev || !netif_running(netdev)) | |
| return; | |
| dev_info(&adapter->pdev->dev, "TX Rings Summary\n"); | |
| pr_info(" %s %s %s %s\n", | |
| "Queue [NTU] [NTC] [bi(ntc)->dma ]", | |
| "leng", "ntw", "timestamp"); | |
| for (n = 0; n < adapter->num_tx_queues; n++) { | |
| ring = adapter->tx_ring[n]; | |
| ixgbe_print_buffer(ring, n); | |
| } | |
| for (n = 0; n < adapter->num_xdp_queues; n++) { | |
| ring = adapter->xdp_ring[n]; | |
| ixgbe_print_buffer(ring, n); | |
| } | |
| /* Print TX Rings */ | |
| if (!netif_msg_tx_done(adapter)) | |
| goto rx_ring_summary; | |
| dev_info(&adapter->pdev->dev, "TX Rings Dump\n"); | |
| /* Transmit Descriptor Formats | |
| * | |
| * 82598 Advanced Transmit Descriptor | |
| * +--------------------------------------------------------------+ | |
| * 0 | Buffer Address [63:0] | | |
| * +--------------------------------------------------------------+ | |
| * 8 | PAYLEN | POPTS | IDX | STA | DCMD |DTYP | RSV | DTALEN | | |
| * +--------------------------------------------------------------+ | |
| * 63 46 45 40 39 36 35 32 31 24 23 20 19 0 | |
| * | |
| * 82598 Advanced Transmit Descriptor (Write-Back Format) | |
| * +--------------------------------------------------------------+ | |
| * 0 | RSV [63:0] | | |
| * +--------------------------------------------------------------+ | |
| * 8 | RSV | STA | NXTSEQ | | |
| * +--------------------------------------------------------------+ | |
| * 63 36 35 32 31 0 | |
| * | |
| * 82599+ Advanced Transmit Descriptor | |
| * +--------------------------------------------------------------+ | |
| * 0 | Buffer Address [63:0] | | |
| * +--------------------------------------------------------------+ | |
| * 8 |PAYLEN |POPTS|CC|IDX |STA |DCMD |DTYP |MAC |RSV |DTALEN | | |
| * +--------------------------------------------------------------+ | |
| * 63 46 45 40 39 38 36 35 32 31 24 23 20 19 18 17 16 15 0 | |
| * | |
| * 82599+ Advanced Transmit Descriptor (Write-Back Format) | |
| * +--------------------------------------------------------------+ | |
| * 0 | RSV [63:0] | | |
| * +--------------------------------------------------------------+ | |
| * 8 | RSV | STA | RSV | | |
| * +--------------------------------------------------------------+ | |
| * 63 36 35 32 31 0 | |
| */ | |
| for (n = 0; n < adapter->num_tx_queues; n++) { | |
| ring = adapter->tx_ring[n]; | |
| pr_info("------------------------------------\n"); | |
| pr_info("TX QUEUE INDEX = %d\n", ring->queue_index); | |
| pr_info("------------------------------------\n"); | |
| pr_info("%s%s %s %s %s %s\n", | |
| "T [desc] [address 63:0 ] ", | |
| "[PlPOIdStDDt Ln] [bi->dma ] ", | |
| "leng", "ntw", "timestamp", "bi->skb"); | |
| for (i = 0; ring->desc && (i < ring->count); i++) { | |
| tx_desc = IXGBE_TX_DESC(ring, i); | |
| tx_buffer = &ring->tx_buffer_info[i]; | |
| u0 = (struct my_u0 *)tx_desc; | |
| if (dma_unmap_len(tx_buffer, len) > 0) { | |
| const char *ring_desc; | |
| if (i == ring->next_to_use && | |
| i == ring->next_to_clean) | |
| ring_desc = " NTC/U"; | |
| else if (i == ring->next_to_use) | |
| ring_desc = " NTU"; | |
| else if (i == ring->next_to_clean) | |
| ring_desc = " NTC"; | |
| else | |
| ring_desc = ""; | |
| pr_info("T [0x%03X] %016llX %016llX %016llX %08X %p %016llX %p%s", | |
| i, | |
| le64_to_cpu(u0->a), | |
| le64_to_cpu(u0->b), | |
| (u64)dma_unmap_addr(tx_buffer, dma), | |
| dma_unmap_len(tx_buffer, len), | |
| tx_buffer->next_to_watch, | |
| (u64)tx_buffer->time_stamp, | |
| tx_buffer->skb, | |
| ring_desc); | |
| if (netif_msg_pktdata(adapter) && | |
| tx_buffer->skb) | |
| print_hex_dump(KERN_INFO, "", | |
| DUMP_PREFIX_ADDRESS, 16, 1, | |
| tx_buffer->skb->data, | |
| dma_unmap_len(tx_buffer, len), | |
| true); | |
| } | |
| } | |
| } | |
| /* Print RX Rings Summary */ | |
| rx_ring_summary: | |
| dev_info(&adapter->pdev->dev, "RX Rings Summary\n"); | |
| pr_info("Queue [NTU] [NTC]\n"); | |
| for (n = 0; n < adapter->num_rx_queues; n++) { | |
| rx_ring = adapter->rx_ring[n]; | |
| pr_info("%5d %5X %5X\n", | |
| n, rx_ring->next_to_use, rx_ring->next_to_clean); | |
| } | |
| /* Print RX Rings */ | |
| if (!netif_msg_rx_status(adapter)) | |
| return; | |
| dev_info(&adapter->pdev->dev, "RX Rings Dump\n"); | |
| /* Receive Descriptor Formats | |
| * | |
| * 82598 Advanced Receive Descriptor (Read) Format | |
| * 63 1 0 | |
| * +-----------------------------------------------------+ | |
| * 0 | Packet Buffer Address [63:1] |A0/NSE| | |
| * +----------------------------------------------+------+ | |
| * 8 | Header Buffer Address [63:1] | DD | | |
| * +-----------------------------------------------------+ | |
| * | |
| * | |
| * 82598 Advanced Receive Descriptor (Write-Back) Format | |
| * | |
| * 63 48 47 32 31 30 21 20 16 15 4 3 0 | |
| * +------------------------------------------------------+ | |
| * 0 | RSS Hash / |SPH| HDR_LEN | RSV |Packet| RSS | | |
| * | Packet | IP | | | | Type | Type | | |
| * | Checksum | Ident | | | | | | | |
| * +------------------------------------------------------+ | |
| * 8 | VLAN Tag | Length | Extended Error | Extended Status | | |
| * +------------------------------------------------------+ | |
| * 63 48 47 32 31 20 19 0 | |
| * | |
| * 82599+ Advanced Receive Descriptor (Read) Format | |
| * 63 1 0 | |
| * +-----------------------------------------------------+ | |
| * 0 | Packet Buffer Address [63:1] |A0/NSE| | |
| * +----------------------------------------------+------+ | |
| * 8 | Header Buffer Address [63:1] | DD | | |
| * +-----------------------------------------------------+ | |
| * | |
| * | |
| * 82599+ Advanced Receive Descriptor (Write-Back) Format | |
| * | |
| * 63 48 47 32 31 30 21 20 17 16 4 3 0 | |
| * +------------------------------------------------------+ | |
| * 0 |RSS / Frag Checksum|SPH| HDR_LEN |RSC- |Packet| RSS | | |
| * |/ RTT / PCoE_PARAM | | | CNT | Type | Type | | |
| * |/ Flow Dir Flt ID | | | | | | | |
| * +------------------------------------------------------+ | |
| * 8 | VLAN Tag | Length |Extended Error| Xtnd Status/NEXTP | | |
| * +------------------------------------------------------+ | |
| * 63 48 47 32 31 20 19 0 | |
| */ | |
| for (n = 0; n < adapter->num_rx_queues; n++) { | |
| rx_ring = adapter->rx_ring[n]; | |
| pr_info("------------------------------------\n"); | |
| pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index); | |
| pr_info("------------------------------------\n"); | |
| pr_info("%s%s%s\n", | |
| "R [desc] [ PktBuf A0] ", | |
| "[ HeadBuf DD] [bi->dma ] [bi->skb ] ", | |
| "<-- Adv Rx Read format"); | |
| pr_info("%s%s%s\n", | |
| "RWB[desc] [PcsmIpSHl PtRs] ", | |
| "[vl er S cks ln] ---------------- [bi->skb ] ", | |
| "<-- Adv Rx Write-Back format"); | |
| for (i = 0; i < rx_ring->count; i++) { | |
| const char *ring_desc; | |
| if (i == rx_ring->next_to_use) | |
| ring_desc = " NTU"; | |
| else if (i == rx_ring->next_to_clean) | |
| ring_desc = " NTC"; | |
| else | |
| ring_desc = ""; | |
| rx_buffer_info = &rx_ring->rx_buffer_info[i]; | |
| rx_desc = IXGBE_RX_DESC(rx_ring, i); | |
| u0 = (struct my_u0 *)rx_desc; | |
| if (rx_desc->wb.upper.length) { | |
| /* Descriptor Done */ | |
| pr_info("RWB[0x%03X] %016llX %016llX ---------------- %p%s\n", | |
| i, | |
| le64_to_cpu(u0->a), | |
| le64_to_cpu(u0->b), | |
| rx_buffer_info->skb, | |
| ring_desc); | |
| } else { | |
| pr_info("R [0x%03X] %016llX %016llX %016llX %p%s\n", | |
| i, | |
| le64_to_cpu(u0->a), | |
| le64_to_cpu(u0->b), | |
| (u64)rx_buffer_info->dma, | |
| rx_buffer_info->skb, | |
| ring_desc); | |
| if (netif_msg_pktdata(adapter) && | |
| rx_buffer_info->dma) { | |
| print_hex_dump(KERN_INFO, "", | |
| DUMP_PREFIX_ADDRESS, 16, 1, | |
| page_address(rx_buffer_info->page) + | |
| rx_buffer_info->page_offset, | |
| ixgbe_rx_bufsz(rx_ring), true); | |
| } | |
| } | |
| } | |
| } | |
| } | |
| static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter) | |
| { | |
| u32 ctrl_ext; | |
| /* Let firmware take over control of h/w */ | |
| ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, | |
| ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD); | |
| } | |
| static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter) | |
| { | |
| u32 ctrl_ext; | |
| /* Let firmware know the driver has taken over */ | |
| ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, | |
| ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); | |
| } | |
| /** | |
| * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors | |
| * @adapter: pointer to adapter struct | |
| * @direction: 0 for Rx, 1 for Tx, -1 for other causes | |
| * @queue: queue to map the corresponding interrupt to | |
| * @msix_vector: the vector to map to the corresponding queue | |
| * | |
| */ | |
| static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction, | |
| u8 queue, u8 msix_vector) | |
| { | |
| u32 ivar, index; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; | |
| if (direction == -1) | |
| direction = 0; | |
| index = (((direction * 64) + queue) >> 2) & 0x1F; | |
| ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index)); | |
| ivar &= ~(0xFF << (8 * (queue & 0x3))); | |
| ivar |= (msix_vector << (8 * (queue & 0x3))); | |
| IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| if (direction == -1) { | |
| /* other causes */ | |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; | |
| index = ((queue & 1) * 8); | |
| ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR_MISC); | |
| ivar &= ~(0xFF << index); | |
| ivar |= (msix_vector << index); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR_MISC, ivar); | |
| break; | |
| } else { | |
| /* tx or rx causes */ | |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; | |
| index = ((16 * (queue & 1)) + (8 * direction)); | |
| ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1)); | |
| ivar &= ~(0xFF << index); | |
| ivar |= (msix_vector << index); | |
| IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar); | |
| break; | |
| } | |
| default: | |
| break; | |
| } | |
| } | |
| static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter, | |
| u64 qmask) | |
| { | |
| u32 mask; | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82598EB: | |
| mask = (IXGBE_EIMS_RTX_QUEUE & qmask); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| mask = (qmask & 0xFFFFFFFF); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask); | |
| mask = (qmask >> 32); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void ixgbe_update_xoff_rx_lfc(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct ixgbe_hw_stats *hwstats = &adapter->stats; | |
| int i; | |
| u32 data; | |
| if ((hw->fc.current_mode != ixgbe_fc_full) && | |
| (hw->fc.current_mode != ixgbe_fc_rx_pause)) | |
| return; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); | |
| break; | |
| default: | |
| data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); | |
| } | |
| hwstats->lxoffrxc += data; | |
| /* refill credits (no tx hang) if we received xoff */ | |
| if (!data) | |
| return; | |
| for (i = 0; i < adapter->num_tx_queues; i++) | |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, | |
| &adapter->tx_ring[i]->state); | |
| for (i = 0; i < adapter->num_xdp_queues; i++) | |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, | |
| &adapter->xdp_ring[i]->state); | |
| } | |
| static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct ixgbe_hw_stats *hwstats = &adapter->stats; | |
| u32 xoff[8] = {0}; | |
| u8 tc; | |
| int i; | |
| bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; | |
| if (adapter->ixgbe_ieee_pfc) | |
| pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); | |
| if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED) || !pfc_en) { | |
| ixgbe_update_xoff_rx_lfc(adapter); | |
| return; | |
| } | |
| /* update stats for each tc, only valid with PFC enabled */ | |
| for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { | |
| u32 pxoffrxc; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| pxoffrxc = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); | |
| break; | |
| default: | |
| pxoffrxc = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); | |
| } | |
| hwstats->pxoffrxc[i] += pxoffrxc; | |
| /* Get the TC for given UP */ | |
| tc = netdev_get_prio_tc_map(adapter->netdev, i); | |
| xoff[tc] += pxoffrxc; | |
| } | |
| /* disarm tx queues that have received xoff frames */ | |
| for (i = 0; i < adapter->num_tx_queues; i++) { | |
| struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; | |
| tc = tx_ring->dcb_tc; | |
| if (xoff[tc]) | |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); | |
| } | |
| for (i = 0; i < adapter->num_xdp_queues; i++) { | |
| struct ixgbe_ring *xdp_ring = adapter->xdp_ring[i]; | |
| tc = xdp_ring->dcb_tc; | |
| if (xoff[tc]) | |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &xdp_ring->state); | |
| } | |
| } | |
| static u64 ixgbe_get_tx_completed(struct ixgbe_ring *ring) | |
| { | |
| return ring->stats.packets; | |
| } | |
| static u64 ixgbe_get_tx_pending(struct ixgbe_ring *ring) | |
| { | |
| struct ixgbe_adapter *adapter; | |
| struct ixgbe_hw *hw; | |
| u32 head, tail; | |
| if (ring->l2_accel_priv) | |
| adapter = ring->l2_accel_priv->real_adapter; | |
| else | |
| adapter = netdev_priv(ring->netdev); | |
| hw = &adapter->hw; | |
| head = IXGBE_READ_REG(hw, IXGBE_TDH(ring->reg_idx)); | |
| tail = IXGBE_READ_REG(hw, IXGBE_TDT(ring->reg_idx)); | |
| if (head != tail) | |
| return (head < tail) ? | |
| tail - head : (tail + ring->count - head); | |
| return 0; | |
| } | |
| static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring) | |
| { | |
| u32 tx_done = ixgbe_get_tx_completed(tx_ring); | |
| u32 tx_done_old = tx_ring->tx_stats.tx_done_old; | |
| u32 tx_pending = ixgbe_get_tx_pending(tx_ring); | |
| clear_check_for_tx_hang(tx_ring); | |
| /* | |
| * Check for a hung queue, but be thorough. This verifies | |
| * that a transmit has been completed since the previous | |
| * check AND there is at least one packet pending. The | |
| * ARMED bit is set to indicate a potential hang. The | |
| * bit is cleared if a pause frame is received to remove | |
| * false hang detection due to PFC or 802.3x frames. By | |
| * requiring this to fail twice we avoid races with | |
| * pfc clearing the ARMED bit and conditions where we | |
| * run the check_tx_hang logic with a transmit completion | |
| * pending but without time to complete it yet. | |
| */ | |
| if (tx_done_old == tx_done && tx_pending) | |
| /* make sure it is true for two checks in a row */ | |
| return test_and_set_bit(__IXGBE_HANG_CHECK_ARMED, | |
| &tx_ring->state); | |
| /* update completed stats and continue */ | |
| tx_ring->tx_stats.tx_done_old = tx_done; | |
| /* reset the countdown */ | |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); | |
| return false; | |
| } | |
| /** | |
| * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout | |
| * @adapter: driver private struct | |
| **/ | |
| static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter) | |
| { | |
| /* Do the reset outside of interrupt context */ | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { | |
| set_bit(__IXGBE_RESET_REQUESTED, &adapter->state); | |
| e_warn(drv, "initiating reset due to tx timeout\n"); | |
| ixgbe_service_event_schedule(adapter); | |
| } | |
| } | |
| /** | |
| * ixgbe_tx_maxrate - callback to set the maximum per-queue bitrate | |
| **/ | |
| static int ixgbe_tx_maxrate(struct net_device *netdev, | |
| int queue_index, u32 maxrate) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 bcnrc_val = ixgbe_link_mbps(adapter); | |
| if (!maxrate) | |
| return 0; | |
| /* Calculate the rate factor values to set */ | |
| bcnrc_val <<= IXGBE_RTTBCNRC_RF_INT_SHIFT; | |
| bcnrc_val /= maxrate; | |
| /* clear everything but the rate factor */ | |
| bcnrc_val &= IXGBE_RTTBCNRC_RF_INT_MASK | | |
| IXGBE_RTTBCNRC_RF_DEC_MASK; | |
| /* enable the rate scheduler */ | |
| bcnrc_val |= IXGBE_RTTBCNRC_RS_ENA; | |
| IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, queue_index); | |
| IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_clean_tx_irq - Reclaim resources after transmit completes | |
| * @q_vector: structure containing interrupt and ring information | |
| * @tx_ring: tx ring to clean | |
| * @napi_budget: Used to determine if we are in netpoll | |
| **/ | |
| static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, | |
| struct ixgbe_ring *tx_ring, int napi_budget) | |
| { | |
| struct ixgbe_adapter *adapter = q_vector->adapter; | |
| struct ixgbe_tx_buffer *tx_buffer; | |
| union ixgbe_adv_tx_desc *tx_desc; | |
| unsigned int total_bytes = 0, total_packets = 0; | |
| unsigned int budget = q_vector->tx.work_limit; | |
| unsigned int i = tx_ring->next_to_clean; | |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) | |
| return true; | |
| tx_buffer = &tx_ring->tx_buffer_info[i]; | |
| tx_desc = IXGBE_TX_DESC(tx_ring, i); | |
| i -= tx_ring->count; | |
| do { | |
| union ixgbe_adv_tx_desc *eop_desc = tx_buffer->next_to_watch; | |
| /* if next_to_watch is not set then there is no work pending */ | |
| if (!eop_desc) | |
| break; | |
| /* prevent any other reads prior to eop_desc */ | |
| smp_rmb(); | |
| /* if DD is not set pending work has not been completed */ | |
| if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD))) | |
| break; | |
| /* clear next_to_watch to prevent false hangs */ | |
| tx_buffer->next_to_watch = NULL; | |
| /* update the statistics for this packet */ | |
| total_bytes += tx_buffer->bytecount; | |
| total_packets += tx_buffer->gso_segs; | |
| /* free the skb */ | |
| if (ring_is_xdp(tx_ring)) | |
| page_frag_free(tx_buffer->data); | |
| else | |
| napi_consume_skb(tx_buffer->skb, napi_budget); | |
| /* unmap skb header data */ | |
| dma_unmap_single(tx_ring->dev, | |
| dma_unmap_addr(tx_buffer, dma), | |
| dma_unmap_len(tx_buffer, len), | |
| DMA_TO_DEVICE); | |
| /* clear tx_buffer data */ | |
| dma_unmap_len_set(tx_buffer, len, 0); | |
| /* unmap remaining buffers */ | |
| while (tx_desc != eop_desc) { | |
| tx_buffer++; | |
| tx_desc++; | |
| i++; | |
| if (unlikely(!i)) { | |
| i -= tx_ring->count; | |
| tx_buffer = tx_ring->tx_buffer_info; | |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); | |
| } | |
| /* unmap any remaining paged data */ | |
| if (dma_unmap_len(tx_buffer, len)) { | |
| dma_unmap_page(tx_ring->dev, | |
| dma_unmap_addr(tx_buffer, dma), | |
| dma_unmap_len(tx_buffer, len), | |
| DMA_TO_DEVICE); | |
| dma_unmap_len_set(tx_buffer, len, 0); | |
| } | |
| } | |
| /* move us one more past the eop_desc for start of next pkt */ | |
| tx_buffer++; | |
| tx_desc++; | |
| i++; | |
| if (unlikely(!i)) { | |
| i -= tx_ring->count; | |
| tx_buffer = tx_ring->tx_buffer_info; | |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); | |
| } | |
| /* issue prefetch for next Tx descriptor */ | |
| prefetch(tx_desc); | |
| /* update budget accounting */ | |
| budget--; | |
| } while (likely(budget)); | |
| i += tx_ring->count; | |
| tx_ring->next_to_clean = i; | |
| u64_stats_update_begin(&tx_ring->syncp); | |
| tx_ring->stats.bytes += total_bytes; | |
| tx_ring->stats.packets += total_packets; | |
| u64_stats_update_end(&tx_ring->syncp); | |
| q_vector->tx.total_bytes += total_bytes; | |
| q_vector->tx.total_packets += total_packets; | |
| if (check_for_tx_hang(tx_ring) && ixgbe_check_tx_hang(tx_ring)) { | |
| /* schedule immediate reset if we believe we hung */ | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| e_err(drv, "Detected Tx Unit Hang %s\n" | |
| " Tx Queue <%d>\n" | |
| " TDH, TDT <%x>, <%x>\n" | |
| " next_to_use <%x>\n" | |
| " next_to_clean <%x>\n" | |
| "tx_buffer_info[next_to_clean]\n" | |
| " time_stamp <%lx>\n" | |
| " jiffies <%lx>\n", | |
| ring_is_xdp(tx_ring) ? "(XDP)" : "", | |
| tx_ring->queue_index, | |
| IXGBE_READ_REG(hw, IXGBE_TDH(tx_ring->reg_idx)), | |
| IXGBE_READ_REG(hw, IXGBE_TDT(tx_ring->reg_idx)), | |
| tx_ring->next_to_use, i, | |
| tx_ring->tx_buffer_info[i].time_stamp, jiffies); | |
| if (!ring_is_xdp(tx_ring)) | |
| netif_stop_subqueue(tx_ring->netdev, | |
| tx_ring->queue_index); | |
| e_info(probe, | |
| "tx hang %d detected on queue %d, resetting adapter\n", | |
| adapter->tx_timeout_count + 1, tx_ring->queue_index); | |
| /* schedule immediate reset if we believe we hung */ | |
| ixgbe_tx_timeout_reset(adapter); | |
| /* the adapter is about to reset, no point in enabling stuff */ | |
| return true; | |
| } | |
| if (ring_is_xdp(tx_ring)) | |
| return !!budget; | |
| netdev_tx_completed_queue(txring_txq(tx_ring), | |
| total_packets, total_bytes); | |
| #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) | |
| if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && | |
| (ixgbe_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) { | |
| /* Make sure that anybody stopping the queue after this | |
| * sees the new next_to_clean. | |
| */ | |
| smp_mb(); | |
| if (__netif_subqueue_stopped(tx_ring->netdev, | |
| tx_ring->queue_index) | |
| && !test_bit(__IXGBE_DOWN, &adapter->state)) { | |
| netif_wake_subqueue(tx_ring->netdev, | |
| tx_ring->queue_index); | |
| ++tx_ring->tx_stats.restart_queue; | |
| } | |
| } | |
| return !!budget; | |
| } | |
| #ifdef CONFIG_IXGBE_DCA | |
| static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *tx_ring, | |
| int cpu) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 txctrl = 0; | |
| u16 reg_offset; | |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) | |
| txctrl = dca3_get_tag(tx_ring->dev, cpu); | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| reg_offset = IXGBE_DCA_TXCTRL(tx_ring->reg_idx); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| reg_offset = IXGBE_DCA_TXCTRL_82599(tx_ring->reg_idx); | |
| txctrl <<= IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599; | |
| break; | |
| default: | |
| /* for unknown hardware do not write register */ | |
| return; | |
| } | |
| /* | |
| * We can enable relaxed ordering for reads, but not writes when | |
| * DCA is enabled. This is due to a known issue in some chipsets | |
| * which will cause the DCA tag to be cleared. | |
| */ | |
| txctrl |= IXGBE_DCA_TXCTRL_DESC_RRO_EN | | |
| IXGBE_DCA_TXCTRL_DATA_RRO_EN | | |
| IXGBE_DCA_TXCTRL_DESC_DCA_EN; | |
| IXGBE_WRITE_REG(hw, reg_offset, txctrl); | |
| } | |
| static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *rx_ring, | |
| int cpu) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 rxctrl = 0; | |
| u8 reg_idx = rx_ring->reg_idx; | |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) | |
| rxctrl = dca3_get_tag(rx_ring->dev, cpu); | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| rxctrl <<= IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599; | |
| break; | |
| default: | |
| break; | |
| } | |
| /* | |
| * We can enable relaxed ordering for reads, but not writes when | |
| * DCA is enabled. This is due to a known issue in some chipsets | |
| * which will cause the DCA tag to be cleared. | |
| */ | |
| rxctrl |= IXGBE_DCA_RXCTRL_DESC_RRO_EN | | |
| IXGBE_DCA_RXCTRL_DATA_DCA_EN | | |
| IXGBE_DCA_RXCTRL_DESC_DCA_EN; | |
| IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl); | |
| } | |
| static void ixgbe_update_dca(struct ixgbe_q_vector *q_vector) | |
| { | |
| struct ixgbe_adapter *adapter = q_vector->adapter; | |
| struct ixgbe_ring *ring; | |
| int cpu = get_cpu(); | |
| if (q_vector->cpu == cpu) | |
| goto out_no_update; | |
| ixgbe_for_each_ring(ring, q_vector->tx) | |
| ixgbe_update_tx_dca(adapter, ring, cpu); | |
| ixgbe_for_each_ring(ring, q_vector->rx) | |
| ixgbe_update_rx_dca(adapter, ring, cpu); | |
| q_vector->cpu = cpu; | |
| out_no_update: | |
| put_cpu(); | |
| } | |
| static void ixgbe_setup_dca(struct ixgbe_adapter *adapter) | |
| { | |
| int i; | |
| /* always use CB2 mode, difference is masked in the CB driver */ | |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, | |
| IXGBE_DCA_CTRL_DCA_MODE_CB2); | |
| else | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, | |
| IXGBE_DCA_CTRL_DCA_DISABLE); | |
| for (i = 0; i < adapter->num_q_vectors; i++) { | |
| adapter->q_vector[i]->cpu = -1; | |
| ixgbe_update_dca(adapter->q_vector[i]); | |
| } | |
| } | |
| static int __ixgbe_notify_dca(struct device *dev, void *data) | |
| { | |
| struct ixgbe_adapter *adapter = dev_get_drvdata(dev); | |
| unsigned long event = *(unsigned long *)data; | |
| if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE)) | |
| return 0; | |
| switch (event) { | |
| case DCA_PROVIDER_ADD: | |
| /* if we're already enabled, don't do it again */ | |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) | |
| break; | |
| if (dca_add_requester(dev) == 0) { | |
| adapter->flags |= IXGBE_FLAG_DCA_ENABLED; | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, | |
| IXGBE_DCA_CTRL_DCA_MODE_CB2); | |
| break; | |
| } | |
| /* fall through - DCA is disabled. */ | |
| case DCA_PROVIDER_REMOVE: | |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { | |
| dca_remove_requester(dev); | |
| adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, | |
| IXGBE_DCA_CTRL_DCA_DISABLE); | |
| } | |
| break; | |
| } | |
| return 0; | |
| } | |
| #endif /* CONFIG_IXGBE_DCA */ | |
| #define IXGBE_RSS_L4_TYPES_MASK \ | |
| ((1ul << IXGBE_RXDADV_RSSTYPE_IPV4_TCP) | \ | |
| (1ul << IXGBE_RXDADV_RSSTYPE_IPV4_UDP) | \ | |
| (1ul << IXGBE_RXDADV_RSSTYPE_IPV6_TCP) | \ | |
| (1ul << IXGBE_RXDADV_RSSTYPE_IPV6_UDP)) | |
| static inline void ixgbe_rx_hash(struct ixgbe_ring *ring, | |
| union ixgbe_adv_rx_desc *rx_desc, | |
| struct sk_buff *skb) | |
| { | |
| u16 rss_type; | |
| if (!(ring->netdev->features & NETIF_F_RXHASH)) | |
| return; | |
| rss_type = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.pkt_info) & | |
| IXGBE_RXDADV_RSSTYPE_MASK; | |
| if (!rss_type) | |
| return; | |
| skb_set_hash(skb, le32_to_cpu(rx_desc->wb.lower.hi_dword.rss), | |
| (IXGBE_RSS_L4_TYPES_MASK & (1ul << rss_type)) ? | |
| PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3); | |
| } | |
| #ifdef IXGBE_FCOE | |
| /** | |
| * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type | |
| * @ring: structure containing ring specific data | |
| * @rx_desc: advanced rx descriptor | |
| * | |
| * Returns : true if it is FCoE pkt | |
| */ | |
| static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring, | |
| union ixgbe_adv_rx_desc *rx_desc) | |
| { | |
| __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; | |
| return test_bit(__IXGBE_RX_FCOE, &ring->state) && | |
| ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) == | |
| (cpu_to_le16(IXGBE_ETQF_FILTER_FCOE << | |
| IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT))); | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| /** | |
| * ixgbe_rx_checksum - indicate in skb if hw indicated a good cksum | |
| * @ring: structure containing ring specific data | |
| * @rx_desc: current Rx descriptor being processed | |
| * @skb: skb currently being received and modified | |
| **/ | |
| static inline void ixgbe_rx_checksum(struct ixgbe_ring *ring, | |
| union ixgbe_adv_rx_desc *rx_desc, | |
| struct sk_buff *skb) | |
| { | |
| __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; | |
| bool encap_pkt = false; | |
| skb_checksum_none_assert(skb); | |
| /* Rx csum disabled */ | |
| if (!(ring->netdev->features & NETIF_F_RXCSUM)) | |
| return; | |
| /* check for VXLAN and Geneve packets */ | |
| if (pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_VXLAN)) { | |
| encap_pkt = true; | |
| skb->encapsulation = 1; | |
| } | |
| /* if IP and error */ | |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_IPCS) && | |
| ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_IPE)) { | |
| ring->rx_stats.csum_err++; | |
| return; | |
| } | |
| if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_L4CS)) | |
| return; | |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_TCPE)) { | |
| /* | |
| * 82599 errata, UDP frames with a 0 checksum can be marked as | |
| * checksum errors. | |
| */ | |
| if ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_UDP)) && | |
| test_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state)) | |
| return; | |
| ring->rx_stats.csum_err++; | |
| return; | |
| } | |
| /* It must be a TCP or UDP packet with a valid checksum */ | |
| skb->ip_summed = CHECKSUM_UNNECESSARY; | |
| if (encap_pkt) { | |
| if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_OUTERIPCS)) | |
| return; | |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_OUTERIPER)) { | |
| skb->ip_summed = CHECKSUM_NONE; | |
| return; | |
| } | |
| /* If we checked the outer header let the stack know */ | |
| skb->csum_level = 1; | |
| } | |
| } | |
| static inline unsigned int ixgbe_rx_offset(struct ixgbe_ring *rx_ring) | |
| { | |
| return ring_uses_build_skb(rx_ring) ? IXGBE_SKB_PAD : 0; | |
| } | |
| static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring, | |
| struct ixgbe_rx_buffer *bi) | |
| { | |
| struct page *page = bi->page; | |
| dma_addr_t dma; | |
| /* since we are recycling buffers we should seldom need to alloc */ | |
| if (likely(page)) | |
| return true; | |
| /* alloc new page for storage */ | |
| page = dev_alloc_pages(ixgbe_rx_pg_order(rx_ring)); | |
| if (unlikely(!page)) { | |
| rx_ring->rx_stats.alloc_rx_page_failed++; | |
| return false; | |
| } | |
| /* map page for use */ | |
| dma = dma_map_page_attrs(rx_ring->dev, page, 0, | |
| ixgbe_rx_pg_size(rx_ring), | |
| DMA_FROM_DEVICE, | |
| IXGBE_RX_DMA_ATTR); | |
| /* | |
| * if mapping failed free memory back to system since | |
| * there isn't much point in holding memory we can't use | |
| */ | |
| if (dma_mapping_error(rx_ring->dev, dma)) { | |
| __free_pages(page, ixgbe_rx_pg_order(rx_ring)); | |
| rx_ring->rx_stats.alloc_rx_page_failed++; | |
| return false; | |
| } | |
| bi->dma = dma; | |
| bi->page = page; | |
| bi->page_offset = ixgbe_rx_offset(rx_ring); | |
| bi->pagecnt_bias = 1; | |
| rx_ring->rx_stats.alloc_rx_page++; | |
| return true; | |
| } | |
| /** | |
| * ixgbe_alloc_rx_buffers - Replace used receive buffers | |
| * @rx_ring: ring to place buffers on | |
| * @cleaned_count: number of buffers to replace | |
| **/ | |
| void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count) | |
| { | |
| union ixgbe_adv_rx_desc *rx_desc; | |
| struct ixgbe_rx_buffer *bi; | |
| u16 i = rx_ring->next_to_use; | |
| u16 bufsz; | |
| /* nothing to do */ | |
| if (!cleaned_count) | |
| return; | |
| rx_desc = IXGBE_RX_DESC(rx_ring, i); | |
| bi = &rx_ring->rx_buffer_info[i]; | |
| i -= rx_ring->count; | |
| bufsz = ixgbe_rx_bufsz(rx_ring); | |
| do { | |
| if (!ixgbe_alloc_mapped_page(rx_ring, bi)) | |
| break; | |
| /* sync the buffer for use by the device */ | |
| dma_sync_single_range_for_device(rx_ring->dev, bi->dma, | |
| bi->page_offset, bufsz, | |
| DMA_FROM_DEVICE); | |
| /* | |
| * Refresh the desc even if buffer_addrs didn't change | |
| * because each write-back erases this info. | |
| */ | |
| rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); | |
| rx_desc++; | |
| bi++; | |
| i++; | |
| if (unlikely(!i)) { | |
| rx_desc = IXGBE_RX_DESC(rx_ring, 0); | |
| bi = rx_ring->rx_buffer_info; | |
| i -= rx_ring->count; | |
| } | |
| /* clear the length for the next_to_use descriptor */ | |
| rx_desc->wb.upper.length = 0; | |
| cleaned_count--; | |
| } while (cleaned_count); | |
| i += rx_ring->count; | |
| if (rx_ring->next_to_use != i) { | |
| rx_ring->next_to_use = i; | |
| /* update next to alloc since we have filled the ring */ | |
| rx_ring->next_to_alloc = i; | |
| /* Force memory writes to complete before letting h/w | |
| * know there are new descriptors to fetch. (Only | |
| * applicable for weak-ordered memory model archs, | |
| * such as IA-64). | |
| */ | |
| wmb(); | |
| writel(i, rx_ring->tail); | |
| } | |
| } | |
| static void ixgbe_set_rsc_gso_size(struct ixgbe_ring *ring, | |
| struct sk_buff *skb) | |
| { | |
| u16 hdr_len = skb_headlen(skb); | |
| /* set gso_size to avoid messing up TCP MSS */ | |
| skb_shinfo(skb)->gso_size = DIV_ROUND_UP((skb->len - hdr_len), | |
| IXGBE_CB(skb)->append_cnt); | |
| skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; | |
| } | |
| static void ixgbe_update_rsc_stats(struct ixgbe_ring *rx_ring, | |
| struct sk_buff *skb) | |
| { | |
| /* if append_cnt is 0 then frame is not RSC */ | |
| if (!IXGBE_CB(skb)->append_cnt) | |
| return; | |
| rx_ring->rx_stats.rsc_count += IXGBE_CB(skb)->append_cnt; | |
| rx_ring->rx_stats.rsc_flush++; | |
| ixgbe_set_rsc_gso_size(rx_ring, skb); | |
| /* gso_size is computed using append_cnt so always clear it last */ | |
| IXGBE_CB(skb)->append_cnt = 0; | |
| } | |
| /** | |
| * ixgbe_process_skb_fields - Populate skb header fields from Rx descriptor | |
| * @rx_ring: rx descriptor ring packet is being transacted on | |
| * @rx_desc: pointer to the EOP Rx descriptor | |
| * @skb: pointer to current skb being populated | |
| * | |
| * This function checks the ring, descriptor, and packet information in | |
| * order to populate the hash, checksum, VLAN, timestamp, protocol, and | |
| * other fields within the skb. | |
| **/ | |
| static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, | |
| union ixgbe_adv_rx_desc *rx_desc, | |
| struct sk_buff *skb) | |
| { | |
| struct net_device *dev = rx_ring->netdev; | |
| u32 flags = rx_ring->q_vector->adapter->flags; | |
| ixgbe_update_rsc_stats(rx_ring, skb); | |
| ixgbe_rx_hash(rx_ring, rx_desc, skb); | |
| ixgbe_rx_checksum(rx_ring, rx_desc, skb); | |
| if (unlikely(flags & IXGBE_FLAG_RX_HWTSTAMP_ENABLED)) | |
| ixgbe_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); | |
| if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && | |
| ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { | |
| u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan); | |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); | |
| } | |
| skb_record_rx_queue(skb, rx_ring->queue_index); | |
| skb->protocol = eth_type_trans(skb, dev); | |
| } | |
| static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector, | |
| struct sk_buff *skb) | |
| { | |
| napi_gro_receive(&q_vector->napi, skb); | |
| } | |
| /** | |
| * ixgbe_is_non_eop - process handling of non-EOP buffers | |
| * @rx_ring: Rx ring being processed | |
| * @rx_desc: Rx descriptor for current buffer | |
| * @skb: Current socket buffer containing buffer in progress | |
| * | |
| * This function updates next to clean. If the buffer is an EOP buffer | |
| * this function exits returning false, otherwise it will place the | |
| * sk_buff in the next buffer to be chained and return true indicating | |
| * that this is in fact a non-EOP buffer. | |
| **/ | |
| static bool ixgbe_is_non_eop(struct ixgbe_ring *rx_ring, | |
| union ixgbe_adv_rx_desc *rx_desc, | |
| struct sk_buff *skb) | |
| { | |
| u32 ntc = rx_ring->next_to_clean + 1; | |
| /* fetch, update, and store next to clean */ | |
| ntc = (ntc < rx_ring->count) ? ntc : 0; | |
| rx_ring->next_to_clean = ntc; | |
| prefetch(IXGBE_RX_DESC(rx_ring, ntc)); | |
| /* update RSC append count if present */ | |
| if (ring_is_rsc_enabled(rx_ring)) { | |
| __le32 rsc_enabled = rx_desc->wb.lower.lo_dword.data & | |
| cpu_to_le32(IXGBE_RXDADV_RSCCNT_MASK); | |
| if (unlikely(rsc_enabled)) { | |
| u32 rsc_cnt = le32_to_cpu(rsc_enabled); | |
| rsc_cnt >>= IXGBE_RXDADV_RSCCNT_SHIFT; | |
| IXGBE_CB(skb)->append_cnt += rsc_cnt - 1; | |
| /* update ntc based on RSC value */ | |
| ntc = le32_to_cpu(rx_desc->wb.upper.status_error); | |
| ntc &= IXGBE_RXDADV_NEXTP_MASK; | |
| ntc >>= IXGBE_RXDADV_NEXTP_SHIFT; | |
| } | |
| } | |
| /* if we are the last buffer then there is nothing else to do */ | |
| if (likely(ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP))) | |
| return false; | |
| /* place skb in next buffer to be received */ | |
| rx_ring->rx_buffer_info[ntc].skb = skb; | |
| rx_ring->rx_stats.non_eop_descs++; | |
| return true; | |
| } | |
| /** | |
| * ixgbe_pull_tail - ixgbe specific version of skb_pull_tail | |
| * @rx_ring: rx descriptor ring packet is being transacted on | |
| * @skb: pointer to current skb being adjusted | |
| * | |
| * This function is an ixgbe specific version of __pskb_pull_tail. The | |
| * main difference between this version and the original function is that | |
| * this function can make several assumptions about the state of things | |
| * that allow for significant optimizations versus the standard function. | |
| * As a result we can do things like drop a frag and maintain an accurate | |
| * truesize for the skb. | |
| */ | |
| static void ixgbe_pull_tail(struct ixgbe_ring *rx_ring, | |
| struct sk_buff *skb) | |
| { | |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; | |
| unsigned char *va; | |
| unsigned int pull_len; | |
| /* | |
| * it is valid to use page_address instead of kmap since we are | |
| * working with pages allocated out of the lomem pool per | |
| * alloc_page(GFP_ATOMIC) | |
| */ | |
| va = skb_frag_address(frag); | |
| /* | |
| * we need the header to contain the greater of either ETH_HLEN or | |
| * 60 bytes if the skb->len is less than 60 for skb_pad. | |
| */ | |
| pull_len = eth_get_headlen(va, IXGBE_RX_HDR_SIZE); | |
| /* align pull length to size of long to optimize memcpy performance */ | |
| skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long))); | |
| /* update all of the pointers */ | |
| skb_frag_size_sub(frag, pull_len); | |
| frag->page_offset += pull_len; | |
| skb->data_len -= pull_len; | |
| skb->tail += pull_len; | |
| } | |
| /** | |
| * ixgbe_dma_sync_frag - perform DMA sync for first frag of SKB | |
| * @rx_ring: rx descriptor ring packet is being transacted on | |
| * @skb: pointer to current skb being updated | |
| * | |
| * This function provides a basic DMA sync up for the first fragment of an | |
| * skb. The reason for doing this is that the first fragment cannot be | |
| * unmapped until we have reached the end of packet descriptor for a buffer | |
| * chain. | |
| */ | |
| static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring, | |
| struct sk_buff *skb) | |
| { | |
| /* if the page was released unmap it, else just sync our portion */ | |
| if (unlikely(IXGBE_CB(skb)->page_released)) { | |
| dma_unmap_page_attrs(rx_ring->dev, IXGBE_CB(skb)->dma, | |
| ixgbe_rx_pg_size(rx_ring), | |
| DMA_FROM_DEVICE, | |
| IXGBE_RX_DMA_ATTR); | |
| } else { | |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; | |
| dma_sync_single_range_for_cpu(rx_ring->dev, | |
| IXGBE_CB(skb)->dma, | |
| frag->page_offset, | |
| skb_frag_size(frag), | |
| DMA_FROM_DEVICE); | |
| } | |
| } | |
| /** | |
| * ixgbe_cleanup_headers - Correct corrupted or empty headers | |
| * @rx_ring: rx descriptor ring packet is being transacted on | |
| * @rx_desc: pointer to the EOP Rx descriptor | |
| * @skb: pointer to current skb being fixed | |
| * | |
| * Check if the skb is valid in the XDP case it will be an error pointer. | |
| * Return true in this case to abort processing and advance to next | |
| * descriptor. | |
| * | |
| * Check for corrupted packet headers caused by senders on the local L2 | |
| * embedded NIC switch not setting up their Tx Descriptors right. These | |
| * should be very rare. | |
| * | |
| * Also address the case where we are pulling data in on pages only | |
| * and as such no data is present in the skb header. | |
| * | |
| * In addition if skb is not at least 60 bytes we need to pad it so that | |
| * it is large enough to qualify as a valid Ethernet frame. | |
| * | |
| * Returns true if an error was encountered and skb was freed. | |
| **/ | |
| static bool ixgbe_cleanup_headers(struct ixgbe_ring *rx_ring, | |
| union ixgbe_adv_rx_desc *rx_desc, | |
| struct sk_buff *skb) | |
| { | |
| struct net_device *netdev = rx_ring->netdev; | |
| /* XDP packets use error pointer so abort at this point */ | |
| if (IS_ERR(skb)) | |
| return true; | |
| /* verify that the packet does not have any known errors */ | |
| if (unlikely(ixgbe_test_staterr(rx_desc, | |
| IXGBE_RXDADV_ERR_FRAME_ERR_MASK) && | |
| !(netdev->features & NETIF_F_RXALL))) { | |
| dev_kfree_skb_any(skb); | |
| return true; | |
| } | |
| /* place header in linear portion of buffer */ | |
| if (!skb_headlen(skb)) | |
| ixgbe_pull_tail(rx_ring, skb); | |
| #ifdef IXGBE_FCOE | |
| /* do not attempt to pad FCoE Frames as this will disrupt DDP */ | |
| if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) | |
| return false; | |
| #endif | |
| /* if eth_skb_pad returns an error the skb was freed */ | |
| if (eth_skb_pad(skb)) | |
| return true; | |
| return false; | |
| } | |
| /** | |
| * ixgbe_reuse_rx_page - page flip buffer and store it back on the ring | |
| * @rx_ring: rx descriptor ring to store buffers on | |
| * @old_buff: donor buffer to have page reused | |
| * | |
| * Synchronizes page for reuse by the adapter | |
| **/ | |
| static void ixgbe_reuse_rx_page(struct ixgbe_ring *rx_ring, | |
| struct ixgbe_rx_buffer *old_buff) | |
| { | |
| struct ixgbe_rx_buffer *new_buff; | |
| u16 nta = rx_ring->next_to_alloc; | |
| new_buff = &rx_ring->rx_buffer_info[nta]; | |
| /* update, and store next to alloc */ | |
| nta++; | |
| rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; | |
| /* Transfer page from old buffer to new buffer. | |
| * Move each member individually to avoid possible store | |
| * forwarding stalls and unnecessary copy of skb. | |
| */ | |
| new_buff->dma = old_buff->dma; | |
| new_buff->page = old_buff->page; | |
| new_buff->page_offset = old_buff->page_offset; | |
| new_buff->pagecnt_bias = old_buff->pagecnt_bias; | |
| } | |
| static inline bool ixgbe_page_is_reserved(struct page *page) | |
| { | |
| return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page); | |
| } | |
| static bool ixgbe_can_reuse_rx_page(struct ixgbe_rx_buffer *rx_buffer) | |
| { | |
| unsigned int pagecnt_bias = rx_buffer->pagecnt_bias; | |
| struct page *page = rx_buffer->page; | |
| /* avoid re-using remote pages */ | |
| if (unlikely(ixgbe_page_is_reserved(page))) | |
| return false; | |
| #if (PAGE_SIZE < 8192) | |
| /* if we are only owner of page we can reuse it */ | |
| if (unlikely((page_ref_count(page) - pagecnt_bias) > 1)) | |
| return false; | |
| #else | |
| /* The last offset is a bit aggressive in that we assume the | |
| * worst case of FCoE being enabled and using a 3K buffer. | |
| * However this should have minimal impact as the 1K extra is | |
| * still less than one buffer in size. | |
| */ | |
| #define IXGBE_LAST_OFFSET \ | |
| (SKB_WITH_OVERHEAD(PAGE_SIZE) - IXGBE_RXBUFFER_3K) | |
| if (rx_buffer->page_offset > IXGBE_LAST_OFFSET) | |
| return false; | |
| #endif | |
| /* If we have drained the page fragment pool we need to update | |
| * the pagecnt_bias and page count so that we fully restock the | |
| * number of references the driver holds. | |
| */ | |
| if (unlikely(!pagecnt_bias)) { | |
| page_ref_add(page, USHRT_MAX); | |
| rx_buffer->pagecnt_bias = USHRT_MAX; | |
| } | |
| return true; | |
| } | |
| /** | |
| * ixgbe_add_rx_frag - Add contents of Rx buffer to sk_buff | |
| * @rx_ring: rx descriptor ring to transact packets on | |
| * @rx_buffer: buffer containing page to add | |
| * @rx_desc: descriptor containing length of buffer written by hardware | |
| * @skb: sk_buff to place the data into | |
| * | |
| * This function will add the data contained in rx_buffer->page to the skb. | |
| * This is done either through a direct copy if the data in the buffer is | |
| * less than the skb header size, otherwise it will just attach the page as | |
| * a frag to the skb. | |
| * | |
| * The function will then update the page offset if necessary and return | |
| * true if the buffer can be reused by the adapter. | |
| **/ | |
| static void ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring, | |
| struct ixgbe_rx_buffer *rx_buffer, | |
| struct sk_buff *skb, | |
| unsigned int size) | |
| { | |
| #if (PAGE_SIZE < 8192) | |
| unsigned int truesize = ixgbe_rx_pg_size(rx_ring) / 2; | |
| #else | |
| unsigned int truesize = ring_uses_build_skb(rx_ring) ? | |
| SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) : | |
| SKB_DATA_ALIGN(size); | |
| #endif | |
| skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page, | |
| rx_buffer->page_offset, size, truesize); | |
| #if (PAGE_SIZE < 8192) | |
| rx_buffer->page_offset ^= truesize; | |
| #else | |
| rx_buffer->page_offset += truesize; | |
| #endif | |
| } | |
| static struct ixgbe_rx_buffer *ixgbe_get_rx_buffer(struct ixgbe_ring *rx_ring, | |
| union ixgbe_adv_rx_desc *rx_desc, | |
| struct sk_buff **skb, | |
| const unsigned int size) | |
| { | |
| struct ixgbe_rx_buffer *rx_buffer; | |
| rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; | |
| prefetchw(rx_buffer->page); | |
| *skb = rx_buffer->skb; | |
| /* Delay unmapping of the first packet. It carries the header | |
| * information, HW may still access the header after the writeback. | |
| * Only unmap it when EOP is reached | |
| */ | |
| if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP)) { | |
| if (!*skb) | |
| goto skip_sync; | |
| } else { | |
| if (*skb) | |
| ixgbe_dma_sync_frag(rx_ring, *skb); | |
| } | |
| /* we are reusing so sync this buffer for CPU use */ | |
| dma_sync_single_range_for_cpu(rx_ring->dev, | |
| rx_buffer->dma, | |
| rx_buffer->page_offset, | |
| size, | |
| DMA_FROM_DEVICE); | |
| skip_sync: | |
| rx_buffer->pagecnt_bias--; | |
| return rx_buffer; | |
| } | |
| static void ixgbe_put_rx_buffer(struct ixgbe_ring *rx_ring, | |
| struct ixgbe_rx_buffer *rx_buffer, | |
| struct sk_buff *skb) | |
| { | |
| if (ixgbe_can_reuse_rx_page(rx_buffer)) { | |
| /* hand second half of page back to the ring */ | |
| ixgbe_reuse_rx_page(rx_ring, rx_buffer); | |
| } else { | |
| if (!IS_ERR(skb) && IXGBE_CB(skb)->dma == rx_buffer->dma) { | |
| /* the page has been released from the ring */ | |
| IXGBE_CB(skb)->page_released = true; | |
| } else { | |
| /* we are not reusing the buffer so unmap it */ | |
| dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma, | |
| ixgbe_rx_pg_size(rx_ring), | |
| DMA_FROM_DEVICE, | |
| IXGBE_RX_DMA_ATTR); | |
| } | |
| __page_frag_cache_drain(rx_buffer->page, | |
| rx_buffer->pagecnt_bias); | |
| } | |
| /* clear contents of rx_buffer */ | |
| rx_buffer->page = NULL; | |
| rx_buffer->skb = NULL; | |
| } | |
| static struct sk_buff *ixgbe_construct_skb(struct ixgbe_ring *rx_ring, | |
| struct ixgbe_rx_buffer *rx_buffer, | |
| struct xdp_buff *xdp, | |
| union ixgbe_adv_rx_desc *rx_desc) | |
| { | |
| unsigned int size = xdp->data_end - xdp->data; | |
| #if (PAGE_SIZE < 8192) | |
| unsigned int truesize = ixgbe_rx_pg_size(rx_ring) / 2; | |
| #else | |
| unsigned int truesize = SKB_DATA_ALIGN(xdp->data_end - | |
| xdp->data_hard_start); | |
| #endif | |
| struct sk_buff *skb; | |
| /* prefetch first cache line of first page */ | |
| prefetch(xdp->data); | |
| #if L1_CACHE_BYTES < 128 | |
| prefetch(xdp->data + L1_CACHE_BYTES); | |
| #endif | |
| /* Note, we get here by enabling legacy-rx via: | |
| * | |
| * ethtool --set-priv-flags <dev> legacy-rx on | |
| * | |
| * In this mode, we currently get 0 extra XDP headroom as | |
| * opposed to having legacy-rx off, where we process XDP | |
| * packets going to stack via ixgbe_build_skb(). The latter | |
| * provides us currently with 192 bytes of headroom. | |
| * | |
| * For ixgbe_construct_skb() mode it means that the | |
| * xdp->data_meta will always point to xdp->data, since | |
| * the helper cannot expand the head. Should this ever | |
| * change in future for legacy-rx mode on, then lets also | |
| * add xdp->data_meta handling here. | |
| */ | |
| /* allocate a skb to store the frags */ | |
| skb = napi_alloc_skb(&rx_ring->q_vector->napi, IXGBE_RX_HDR_SIZE); | |
| if (unlikely(!skb)) | |
| return NULL; | |
| if (size > IXGBE_RX_HDR_SIZE) { | |
| if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP)) | |
| IXGBE_CB(skb)->dma = rx_buffer->dma; | |
| skb_add_rx_frag(skb, 0, rx_buffer->page, | |
| xdp->data - page_address(rx_buffer->page), | |
| size, truesize); | |
| #if (PAGE_SIZE < 8192) | |
| rx_buffer->page_offset ^= truesize; | |
| #else | |
| rx_buffer->page_offset += truesize; | |
| #endif | |
| } else { | |
| memcpy(__skb_put(skb, size), | |
| xdp->data, ALIGN(size, sizeof(long))); | |
| rx_buffer->pagecnt_bias++; | |
| } | |
| return skb; | |
| } | |
| static struct sk_buff *ixgbe_build_skb(struct ixgbe_ring *rx_ring, | |
| struct ixgbe_rx_buffer *rx_buffer, | |
| struct xdp_buff *xdp, | |
| union ixgbe_adv_rx_desc *rx_desc) | |
| { | |
| unsigned int metasize = xdp->data - xdp->data_meta; | |
| #if (PAGE_SIZE < 8192) | |
| unsigned int truesize = ixgbe_rx_pg_size(rx_ring) / 2; | |
| #else | |
| unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + | |
| SKB_DATA_ALIGN(xdp->data_end - | |
| xdp->data_hard_start); | |
| #endif | |
| struct sk_buff *skb; | |
| /* Prefetch first cache line of first page. If xdp->data_meta | |
| * is unused, this points extactly as xdp->data, otherwise we | |
| * likely have a consumer accessing first few bytes of meta | |
| * data, and then actual data. | |
| */ | |
| prefetch(xdp->data_meta); | |
| #if L1_CACHE_BYTES < 128 | |
| prefetch(xdp->data_meta + L1_CACHE_BYTES); | |
| #endif | |
| /* build an skb to around the page buffer */ | |
| skb = build_skb(xdp->data_hard_start, truesize); | |
| if (unlikely(!skb)) | |
| return NULL; | |
| /* update pointers within the skb to store the data */ | |
| skb_reserve(skb, xdp->data - xdp->data_hard_start); | |
| __skb_put(skb, xdp->data_end - xdp->data); | |
| if (metasize) | |
| skb_metadata_set(skb, metasize); | |
| /* record DMA address if this is the start of a chain of buffers */ | |
| if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP)) | |
| IXGBE_CB(skb)->dma = rx_buffer->dma; | |
| /* update buffer offset */ | |
| #if (PAGE_SIZE < 8192) | |
| rx_buffer->page_offset ^= truesize; | |
| #else | |
| rx_buffer->page_offset += truesize; | |
| #endif | |
| return skb; | |
| } | |
| #define IXGBE_XDP_PASS 0 | |
| #define IXGBE_XDP_CONSUMED 1 | |
| #define IXGBE_XDP_TX 2 | |
| static int ixgbe_xmit_xdp_ring(struct ixgbe_adapter *adapter, | |
| struct xdp_buff *xdp); | |
| static struct sk_buff *ixgbe_run_xdp(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *rx_ring, | |
| struct xdp_buff *xdp) | |
| { | |
| int err, result = IXGBE_XDP_PASS; | |
| struct bpf_prog *xdp_prog; | |
| u32 act; | |
| rcu_read_lock(); | |
| xdp_prog = READ_ONCE(rx_ring->xdp_prog); | |
| if (!xdp_prog) | |
| goto xdp_out; | |
| act = bpf_prog_run_xdp(xdp_prog, xdp); | |
| switch (act) { | |
| case XDP_PASS: | |
| break; | |
| case XDP_TX: | |
| result = ixgbe_xmit_xdp_ring(adapter, xdp); | |
| break; | |
| case XDP_REDIRECT: | |
| err = xdp_do_redirect(adapter->netdev, xdp, xdp_prog); | |
| if (!err) | |
| result = IXGBE_XDP_TX; | |
| else | |
| result = IXGBE_XDP_CONSUMED; | |
| break; | |
| default: | |
| bpf_warn_invalid_xdp_action(act); | |
| /* fallthrough */ | |
| case XDP_ABORTED: | |
| trace_xdp_exception(rx_ring->netdev, xdp_prog, act); | |
| /* fallthrough -- handle aborts by dropping packet */ | |
| case XDP_DROP: | |
| result = IXGBE_XDP_CONSUMED; | |
| break; | |
| } | |
| xdp_out: | |
| rcu_read_unlock(); | |
| return ERR_PTR(-result); | |
| } | |
| static void ixgbe_rx_buffer_flip(struct ixgbe_ring *rx_ring, | |
| struct ixgbe_rx_buffer *rx_buffer, | |
| unsigned int size) | |
| { | |
| #if (PAGE_SIZE < 8192) | |
| unsigned int truesize = ixgbe_rx_pg_size(rx_ring) / 2; | |
| rx_buffer->page_offset ^= truesize; | |
| #else | |
| unsigned int truesize = ring_uses_build_skb(rx_ring) ? | |
| SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) : | |
| SKB_DATA_ALIGN(size); | |
| rx_buffer->page_offset += truesize; | |
| #endif | |
| } | |
| /** | |
| * ixgbe_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf | |
| * @q_vector: structure containing interrupt and ring information | |
| * @rx_ring: rx descriptor ring to transact packets on | |
| * @budget: Total limit on number of packets to process | |
| * | |
| * This function provides a "bounce buffer" approach to Rx interrupt | |
| * processing. The advantage to this is that on systems that have | |
| * expensive overhead for IOMMU access this provides a means of avoiding | |
| * it by maintaining the mapping of the page to the syste. | |
| * | |
| * Returns amount of work completed | |
| **/ | |
| static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, | |
| struct ixgbe_ring *rx_ring, | |
| const int budget) | |
| { | |
| unsigned int total_rx_bytes = 0, total_rx_packets = 0; | |
| struct ixgbe_adapter *adapter = q_vector->adapter; | |
| #ifdef IXGBE_FCOE | |
| int ddp_bytes; | |
| unsigned int mss = 0; | |
| #endif /* IXGBE_FCOE */ | |
| u16 cleaned_count = ixgbe_desc_unused(rx_ring); | |
| bool xdp_xmit = false; | |
| while (likely(total_rx_packets < budget)) { | |
| union ixgbe_adv_rx_desc *rx_desc; | |
| struct ixgbe_rx_buffer *rx_buffer; | |
| struct sk_buff *skb; | |
| struct xdp_buff xdp; | |
| unsigned int size; | |
| /* return some buffers to hardware, one at a time is too slow */ | |
| if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) { | |
| ixgbe_alloc_rx_buffers(rx_ring, cleaned_count); | |
| cleaned_count = 0; | |
| } | |
| rx_desc = IXGBE_RX_DESC(rx_ring, rx_ring->next_to_clean); | |
| size = le16_to_cpu(rx_desc->wb.upper.length); | |
| if (!size) | |
| break; | |
| /* This memory barrier is needed to keep us from reading | |
| * any other fields out of the rx_desc until we know the | |
| * descriptor has been written back | |
| */ | |
| dma_rmb(); | |
| rx_buffer = ixgbe_get_rx_buffer(rx_ring, rx_desc, &skb, size); | |
| /* retrieve a buffer from the ring */ | |
| if (!skb) { | |
| xdp.data = page_address(rx_buffer->page) + | |
| rx_buffer->page_offset; | |
| xdp.data_meta = xdp.data; | |
| xdp.data_hard_start = xdp.data - | |
| ixgbe_rx_offset(rx_ring); | |
| xdp.data_end = xdp.data + size; | |
| skb = ixgbe_run_xdp(adapter, rx_ring, &xdp); | |
| } | |
| if (IS_ERR(skb)) { | |
| if (PTR_ERR(skb) == -IXGBE_XDP_TX) { | |
| xdp_xmit = true; | |
| ixgbe_rx_buffer_flip(rx_ring, rx_buffer, size); | |
| } else { | |
| rx_buffer->pagecnt_bias++; | |
| } | |
| total_rx_packets++; | |
| total_rx_bytes += size; | |
| } else if (skb) { | |
| ixgbe_add_rx_frag(rx_ring, rx_buffer, skb, size); | |
| } else if (ring_uses_build_skb(rx_ring)) { | |
| skb = ixgbe_build_skb(rx_ring, rx_buffer, | |
| &xdp, rx_desc); | |
| } else { | |
| skb = ixgbe_construct_skb(rx_ring, rx_buffer, | |
| &xdp, rx_desc); | |
| } | |
| /* exit if we failed to retrieve a buffer */ | |
| if (!skb) { | |
| rx_ring->rx_stats.alloc_rx_buff_failed++; | |
| rx_buffer->pagecnt_bias++; | |
| break; | |
| } | |
| ixgbe_put_rx_buffer(rx_ring, rx_buffer, skb); | |
| cleaned_count++; | |
| /* place incomplete frames back on ring for completion */ | |
| if (ixgbe_is_non_eop(rx_ring, rx_desc, skb)) | |
| continue; | |
| /* verify the packet layout is correct */ | |
| if (ixgbe_cleanup_headers(rx_ring, rx_desc, skb)) | |
| continue; | |
| /* probably a little skewed due to removing CRC */ | |
| total_rx_bytes += skb->len; | |
| /* populate checksum, timestamp, VLAN, and protocol */ | |
| ixgbe_process_skb_fields(rx_ring, rx_desc, skb); | |
| #ifdef IXGBE_FCOE | |
| /* if ddp, not passing to ULD unless for FCP_RSP or error */ | |
| if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) { | |
| ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb); | |
| /* include DDPed FCoE data */ | |
| if (ddp_bytes > 0) { | |
| if (!mss) { | |
| mss = rx_ring->netdev->mtu - | |
| sizeof(struct fcoe_hdr) - | |
| sizeof(struct fc_frame_header) - | |
| sizeof(struct fcoe_crc_eof); | |
| if (mss > 512) | |
| mss &= ~511; | |
| } | |
| total_rx_bytes += ddp_bytes; | |
| total_rx_packets += DIV_ROUND_UP(ddp_bytes, | |
| mss); | |
| } | |
| if (!ddp_bytes) { | |
| dev_kfree_skb_any(skb); | |
| continue; | |
| } | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| ixgbe_rx_skb(q_vector, skb); | |
| /* update budget accounting */ | |
| total_rx_packets++; | |
| } | |
| if (xdp_xmit) { | |
| struct ixgbe_ring *ring = adapter->xdp_ring[smp_processor_id()]; | |
| /* Force memory writes to complete before letting h/w | |
| * know there are new descriptors to fetch. | |
| */ | |
| wmb(); | |
| writel(ring->next_to_use, ring->tail); | |
| xdp_do_flush_map(); | |
| } | |
| u64_stats_update_begin(&rx_ring->syncp); | |
| rx_ring->stats.packets += total_rx_packets; | |
| rx_ring->stats.bytes += total_rx_bytes; | |
| u64_stats_update_end(&rx_ring->syncp); | |
| q_vector->rx.total_packets += total_rx_packets; | |
| q_vector->rx.total_bytes += total_rx_bytes; | |
| return total_rx_packets; | |
| } | |
| /** | |
| * ixgbe_configure_msix - Configure MSI-X hardware | |
| * @adapter: board private structure | |
| * | |
| * ixgbe_configure_msix sets up the hardware to properly generate MSI-X | |
| * interrupts. | |
| **/ | |
| static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_q_vector *q_vector; | |
| int v_idx; | |
| u32 mask; | |
| /* Populate MSIX to EITR Select */ | |
| if (adapter->num_vfs > 32) { | |
| u32 eitrsel = BIT(adapter->num_vfs - 32) - 1; | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel); | |
| } | |
| /* | |
| * Populate the IVAR table and set the ITR values to the | |
| * corresponding register. | |
| */ | |
| for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) { | |
| struct ixgbe_ring *ring; | |
| q_vector = adapter->q_vector[v_idx]; | |
| ixgbe_for_each_ring(ring, q_vector->rx) | |
| ixgbe_set_ivar(adapter, 0, ring->reg_idx, v_idx); | |
| ixgbe_for_each_ring(ring, q_vector->tx) | |
| ixgbe_set_ivar(adapter, 1, ring->reg_idx, v_idx); | |
| ixgbe_write_eitr(q_vector); | |
| } | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82598EB: | |
| ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX, | |
| v_idx); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| ixgbe_set_ivar(adapter, -1, 1, v_idx); | |
| break; | |
| default: | |
| break; | |
| } | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950); | |
| /* set up to autoclear timer, and the vectors */ | |
| mask = IXGBE_EIMS_ENABLE_MASK; | |
| mask &= ~(IXGBE_EIMS_OTHER | | |
| IXGBE_EIMS_MAILBOX | | |
| IXGBE_EIMS_LSC); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask); | |
| } | |
| enum latency_range { | |
| lowest_latency = 0, | |
| low_latency = 1, | |
| bulk_latency = 2, | |
| latency_invalid = 255 | |
| }; | |
| /** | |
| * ixgbe_update_itr - update the dynamic ITR value based on statistics | |
| * @q_vector: structure containing interrupt and ring information | |
| * @ring_container: structure containing ring performance data | |
| * | |
| * Stores a new ITR value based on packets and byte | |
| * counts during the last interrupt. The advantage of per interrupt | |
| * computation is faster updates and more accurate ITR for the current | |
| * traffic pattern. Constants in this function were computed | |
| * based on theoretical maximum wire speed and thresholds were set based | |
| * on testing data as well as attempting to minimize response time | |
| * while increasing bulk throughput. | |
| * this functionality is controlled by the InterruptThrottleRate module | |
| * parameter (see ixgbe_param.c) | |
| **/ | |
| static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector, | |
| struct ixgbe_ring_container *ring_container) | |
| { | |
| unsigned int itr = IXGBE_ITR_ADAPTIVE_MIN_USECS | | |
| IXGBE_ITR_ADAPTIVE_LATENCY; | |
| unsigned int avg_wire_size, packets, bytes; | |
| unsigned long next_update = jiffies; | |
| /* If we don't have any rings just leave ourselves set for maximum | |
| * possible latency so we take ourselves out of the equation. | |
| */ | |
| if (!ring_container->ring) | |
| return; | |
| /* If we didn't update within up to 1 - 2 jiffies we can assume | |
| * that either packets are coming in so slow there hasn't been | |
| * any work, or that there is so much work that NAPI is dealing | |
| * with interrupt moderation and we don't need to do anything. | |
| */ | |
| if (time_after(next_update, ring_container->next_update)) | |
| goto clear_counts; | |
| packets = ring_container->total_packets; | |
| /* We have no packets to actually measure against. This means | |
| * either one of the other queues on this vector is active or | |
| * we are a Tx queue doing TSO with too high of an interrupt rate. | |
| * | |
| * When this occurs just tick up our delay by the minimum value | |
| * and hope that this extra delay will prevent us from being called | |
| * without any work on our queue. | |
| */ | |
| if (!packets) { | |
| itr = (q_vector->itr >> 2) + IXGBE_ITR_ADAPTIVE_MIN_INC; | |
| if (itr > IXGBE_ITR_ADAPTIVE_MAX_USECS) | |
| itr = IXGBE_ITR_ADAPTIVE_MAX_USECS; | |
| itr += ring_container->itr & IXGBE_ITR_ADAPTIVE_LATENCY; | |
| goto clear_counts; | |
| } | |
| bytes = ring_container->total_bytes; | |
| /* If packets are less than 4 or bytes are less than 9000 assume | |
| * insufficient data to use bulk rate limiting approach. We are | |
| * likely latency driven. | |
| */ | |
| if (packets < 4 && bytes < 9000) { | |
| itr = IXGBE_ITR_ADAPTIVE_LATENCY; | |
| goto adjust_by_size; | |
| } | |
| /* Between 4 and 48 we can assume that our current interrupt delay | |
| * is only slightly too low. As such we should increase it by a small | |
| * fixed amount. | |
| */ | |
| if (packets < 48) { | |
| itr = (q_vector->itr >> 2) + IXGBE_ITR_ADAPTIVE_MIN_INC; | |
| if (itr > IXGBE_ITR_ADAPTIVE_MAX_USECS) | |
| itr = IXGBE_ITR_ADAPTIVE_MAX_USECS; | |
| goto clear_counts; | |
| } | |
| /* Between 48 and 96 is our "goldilocks" zone where we are working | |
| * out "just right". Just report that our current ITR is good for us. | |
| */ | |
| if (packets < 96) { | |
| itr = q_vector->itr >> 2; | |
| goto clear_counts; | |
| } | |
| /* If packet count is 96 or greater we are likely looking at a slight | |
| * overrun of the delay we want. Try halving our delay to see if that | |
| * will cut the number of packets in half per interrupt. | |
| */ | |
| if (packets < 256) { | |
| itr = q_vector->itr >> 3; | |
| if (itr < IXGBE_ITR_ADAPTIVE_MIN_USECS) | |
| itr = IXGBE_ITR_ADAPTIVE_MIN_USECS; | |
| goto clear_counts; | |
| } | |
| /* The paths below assume we are dealing with a bulk ITR since number | |
| * of packets is 256 or greater. We are just going to have to compute | |
| * a value and try to bring the count under control, though for smaller | |
| * packet sizes there isn't much we can do as NAPI polling will likely | |
| * be kicking in sooner rather than later. | |
| */ | |
| itr = IXGBE_ITR_ADAPTIVE_BULK; | |
| adjust_by_size: | |
| /* If packet counts are 256 or greater we can assume we have a gross | |
| * overestimation of what the rate should be. Instead of trying to fine | |
| * tune it just use the formula below to try and dial in an exact value | |
| * give the current packet size of the frame. | |
| */ | |
| avg_wire_size = bytes / packets; | |
| /* The following is a crude approximation of: | |
| * wmem_default / (size + overhead) = desired_pkts_per_int | |
| * rate / bits_per_byte / (size + ethernet overhead) = pkt_rate | |
| * (desired_pkt_rate / pkt_rate) * usecs_per_sec = ITR value | |
| * | |
| * Assuming wmem_default is 212992 and overhead is 640 bytes per | |
| * packet, (256 skb, 64 headroom, 320 shared info), we can reduce the | |
| * formula down to | |
| * | |
| * (170 * (size + 24)) / (size + 640) = ITR | |
| * | |
| * We first do some math on the packet size and then finally bitshift | |
| * by 8 after rounding up. We also have to account for PCIe link speed | |
| * difference as ITR scales based on this. | |
| */ | |
| if (avg_wire_size <= 60) { | |
| /* Start at 50k ints/sec */ | |
| avg_wire_size = 5120; | |
| } else if (avg_wire_size <= 316) { | |
| /* 50K ints/sec to 16K ints/sec */ | |
| avg_wire_size *= 40; | |
| avg_wire_size += 2720; | |
| } else if (avg_wire_size <= 1084) { | |
| /* 16K ints/sec to 9.2K ints/sec */ | |
| avg_wire_size *= 15; | |
| avg_wire_size += 11452; | |
| } else if (avg_wire_size <= 1980) { | |
| /* 9.2K ints/sec to 8K ints/sec */ | |
| avg_wire_size *= 5; | |
| avg_wire_size += 22420; | |
| } else { | |
| /* plateau at a limit of 8K ints/sec */ | |
| avg_wire_size = 32256; | |
| } | |
| /* If we are in low latency mode half our delay which doubles the rate | |
| * to somewhere between 100K to 16K ints/sec | |
| */ | |
| if (itr & IXGBE_ITR_ADAPTIVE_LATENCY) | |
| avg_wire_size >>= 1; | |
| /* Resultant value is 256 times larger than it needs to be. This | |
| * gives us room to adjust the value as needed to either increase | |
| * or decrease the value based on link speeds of 10G, 2.5G, 1G, etc. | |
| * | |
| * Use addition as we have already recorded the new latency flag | |
| * for the ITR value. | |
| */ | |
| switch (q_vector->adapter->link_speed) { | |
| case IXGBE_LINK_SPEED_10GB_FULL: | |
| case IXGBE_LINK_SPEED_100_FULL: | |
| default: | |
| itr += DIV_ROUND_UP(avg_wire_size, | |
| IXGBE_ITR_ADAPTIVE_MIN_INC * 256) * | |
| IXGBE_ITR_ADAPTIVE_MIN_INC; | |
| break; | |
| case IXGBE_LINK_SPEED_2_5GB_FULL: | |
| case IXGBE_LINK_SPEED_1GB_FULL: | |
| case IXGBE_LINK_SPEED_10_FULL: | |
| itr += DIV_ROUND_UP(avg_wire_size, | |
| IXGBE_ITR_ADAPTIVE_MIN_INC * 64) * | |
| IXGBE_ITR_ADAPTIVE_MIN_INC; | |
| break; | |
| } | |
| clear_counts: | |
| /* write back value */ | |
| ring_container->itr = itr; | |
| /* next update should occur within next jiffy */ | |
| ring_container->next_update = next_update + 1; | |
| ring_container->total_bytes = 0; | |
| ring_container->total_packets = 0; | |
| } | |
| /** | |
| * ixgbe_write_eitr - write EITR register in hardware specific way | |
| * @q_vector: structure containing interrupt and ring information | |
| * | |
| * This function is made to be called by ethtool and by the driver | |
| * when it needs to update EITR registers at runtime. Hardware | |
| * specific quirks/differences are taken care of here. | |
| */ | |
| void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector) | |
| { | |
| struct ixgbe_adapter *adapter = q_vector->adapter; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int v_idx = q_vector->v_idx; | |
| u32 itr_reg = q_vector->itr & IXGBE_MAX_EITR; | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82598EB: | |
| /* must write high and low 16 bits to reset counter */ | |
| itr_reg |= (itr_reg << 16); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| /* | |
| * set the WDIS bit to not clear the timer bits and cause an | |
| * immediate assertion of the interrupt | |
| */ | |
| itr_reg |= IXGBE_EITR_CNT_WDIS; | |
| break; | |
| default: | |
| break; | |
| } | |
| IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg); | |
| } | |
| static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector) | |
| { | |
| u32 new_itr; | |
| ixgbe_update_itr(q_vector, &q_vector->tx); | |
| ixgbe_update_itr(q_vector, &q_vector->rx); | |
| /* use the smallest value of new ITR delay calculations */ | |
| new_itr = min(q_vector->rx.itr, q_vector->tx.itr); | |
| /* Clear latency flag if set, shift into correct position */ | |
| new_itr &= ~IXGBE_ITR_ADAPTIVE_LATENCY; | |
| new_itr <<= 2; | |
| if (new_itr != q_vector->itr) { | |
| /* save the algorithm value here */ | |
| q_vector->itr = new_itr; | |
| ixgbe_write_eitr(q_vector); | |
| } | |
| } | |
| /** | |
| * ixgbe_check_overtemp_subtask - check for over temperature | |
| * @adapter: pointer to adapter | |
| **/ | |
| static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 eicr = adapter->interrupt_event; | |
| s32 rc; | |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) | |
| return; | |
| if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT)) | |
| return; | |
| adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT; | |
| switch (hw->device_id) { | |
| case IXGBE_DEV_ID_82599_T3_LOM: | |
| /* | |
| * Since the warning interrupt is for both ports | |
| * we don't have to check if: | |
| * - This interrupt wasn't for our port. | |
| * - We may have missed the interrupt so always have to | |
| * check if we got a LSC | |
| */ | |
| if (!(eicr & IXGBE_EICR_GPI_SDP0_8259X) && | |
| !(eicr & IXGBE_EICR_LSC)) | |
| return; | |
| if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) { | |
| u32 speed; | |
| bool link_up = false; | |
| hw->mac.ops.check_link(hw, &speed, &link_up, false); | |
| if (link_up) | |
| return; | |
| } | |
| /* Check if this is not due to overtemp */ | |
| if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP) | |
| return; | |
| break; | |
| case IXGBE_DEV_ID_X550EM_A_1G_T: | |
| case IXGBE_DEV_ID_X550EM_A_1G_T_L: | |
| rc = hw->phy.ops.check_overtemp(hw); | |
| if (rc != IXGBE_ERR_OVERTEMP) | |
| return; | |
| break; | |
| default: | |
| if (adapter->hw.mac.type >= ixgbe_mac_X540) | |
| return; | |
| if (!(eicr & IXGBE_EICR_GPI_SDP0(hw))) | |
| return; | |
| break; | |
| } | |
| e_crit(drv, "%s\n", ixgbe_overheat_msg); | |
| adapter->interrupt_event = 0; | |
| } | |
| static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) && | |
| (eicr & IXGBE_EICR_GPI_SDP1(hw))) { | |
| e_crit(probe, "Fan has stopped, replace the adapter\n"); | |
| /* write to clear the interrupt */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1(hw)); | |
| } | |
| } | |
| static void ixgbe_check_overtemp_event(struct ixgbe_adapter *adapter, u32 eicr) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)) | |
| return; | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82599EB: | |
| /* | |
| * Need to check link state so complete overtemp check | |
| * on service task | |
| */ | |
| if (((eicr & IXGBE_EICR_GPI_SDP0(hw)) || | |
| (eicr & IXGBE_EICR_LSC)) && | |
| (!test_bit(__IXGBE_DOWN, &adapter->state))) { | |
| adapter->interrupt_event = eicr; | |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT; | |
| ixgbe_service_event_schedule(adapter); | |
| return; | |
| } | |
| return; | |
| case ixgbe_mac_x550em_a: | |
| if (eicr & IXGBE_EICR_GPI_SDP0_X550EM_a) { | |
| adapter->interrupt_event = eicr; | |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT; | |
| ixgbe_service_event_schedule(adapter); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, | |
| IXGBE_EICR_GPI_SDP0_X550EM_a); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICR, | |
| IXGBE_EICR_GPI_SDP0_X550EM_a); | |
| } | |
| return; | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X540: | |
| if (!(eicr & IXGBE_EICR_TS)) | |
| return; | |
| break; | |
| default: | |
| return; | |
| } | |
| e_crit(drv, "%s\n", ixgbe_overheat_msg); | |
| } | |
| static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) | |
| { | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| if (hw->phy.type == ixgbe_phy_nl) | |
| return true; | |
| return false; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| switch (hw->mac.ops.get_media_type(hw)) { | |
| case ixgbe_media_type_fiber: | |
| case ixgbe_media_type_fiber_qsfp: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| default: | |
| return false; | |
| } | |
| } | |
| static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 eicr_mask = IXGBE_EICR_GPI_SDP2(hw); | |
| if (!ixgbe_is_sfp(hw)) | |
| return; | |
| /* Later MAC's use different SDP */ | |
| if (hw->mac.type >= ixgbe_mac_X540) | |
| eicr_mask = IXGBE_EICR_GPI_SDP0_X540; | |
| if (eicr & eicr_mask) { | |
| /* Clear the interrupt */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr_mask); | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { | |
| adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; | |
| adapter->sfp_poll_time = 0; | |
| ixgbe_service_event_schedule(adapter); | |
| } | |
| } | |
| if (adapter->hw.mac.type == ixgbe_mac_82599EB && | |
| (eicr & IXGBE_EICR_GPI_SDP1(hw))) { | |
| /* Clear the interrupt */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1(hw)); | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { | |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; | |
| ixgbe_service_event_schedule(adapter); | |
| } | |
| } | |
| } | |
| static void ixgbe_check_lsc(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| adapter->lsc_int++; | |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; | |
| adapter->link_check_timeout = jiffies; | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC); | |
| IXGBE_WRITE_FLUSH(hw); | |
| ixgbe_service_event_schedule(adapter); | |
| } | |
| } | |
| static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter, | |
| u64 qmask) | |
| { | |
| u32 mask; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| mask = (IXGBE_EIMS_RTX_QUEUE & qmask); | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| mask = (qmask & 0xFFFFFFFF); | |
| if (mask) | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask); | |
| mask = (qmask >> 32); | |
| if (mask) | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask); | |
| break; | |
| default: | |
| break; | |
| } | |
| /* skip the flush */ | |
| } | |
| static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter, | |
| u64 qmask) | |
| { | |
| u32 mask; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| mask = (IXGBE_EIMS_RTX_QUEUE & qmask); | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| mask = (qmask & 0xFFFFFFFF); | |
| if (mask) | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask); | |
| mask = (qmask >> 32); | |
| if (mask) | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask); | |
| break; | |
| default: | |
| break; | |
| } | |
| /* skip the flush */ | |
| } | |
| /** | |
| * ixgbe_irq_enable - Enable default interrupt generation settings | |
| * @adapter: board private structure | |
| **/ | |
| static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues, | |
| bool flush) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE); | |
| /* don't reenable LSC while waiting for link */ | |
| if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) | |
| mask &= ~IXGBE_EIMS_LSC; | |
| if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82599EB: | |
| mask |= IXGBE_EIMS_GPI_SDP0(hw); | |
| break; | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| mask |= IXGBE_EIMS_TS; | |
| break; | |
| default: | |
| break; | |
| } | |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) | |
| mask |= IXGBE_EIMS_GPI_SDP1(hw); | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82599EB: | |
| mask |= IXGBE_EIMS_GPI_SDP1(hw); | |
| mask |= IXGBE_EIMS_GPI_SDP2(hw); | |
| /* fall through */ | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| if (adapter->hw.device_id == IXGBE_DEV_ID_X550EM_X_SFP || | |
| adapter->hw.device_id == IXGBE_DEV_ID_X550EM_A_SFP || | |
| adapter->hw.device_id == IXGBE_DEV_ID_X550EM_A_SFP_N) | |
| mask |= IXGBE_EIMS_GPI_SDP0(&adapter->hw); | |
| if (adapter->hw.phy.type == ixgbe_phy_x550em_ext_t) | |
| mask |= IXGBE_EICR_GPI_SDP0_X540; | |
| mask |= IXGBE_EIMS_ECC; | |
| mask |= IXGBE_EIMS_MAILBOX; | |
| break; | |
| default: | |
| break; | |
| } | |
| if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) && | |
| !(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) | |
| mask |= IXGBE_EIMS_FLOW_DIR; | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); | |
| if (queues) | |
| ixgbe_irq_enable_queues(adapter, ~0); | |
| if (flush) | |
| IXGBE_WRITE_FLUSH(&adapter->hw); | |
| } | |
| static irqreturn_t ixgbe_msix_other(int irq, void *data) | |
| { | |
| struct ixgbe_adapter *adapter = data; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 eicr; | |
| /* | |
| * Workaround for Silicon errata. Use clear-by-write instead | |
| * of clear-by-read. Reading with EICS will return the | |
| * interrupt causes without clearing, which later be done | |
| * with the write to EICR. | |
| */ | |
| eicr = IXGBE_READ_REG(hw, IXGBE_EICS); | |
| /* The lower 16bits of the EICR register are for the queue interrupts | |
| * which should be masked here in order to not accidentally clear them if | |
| * the bits are high when ixgbe_msix_other is called. There is a race | |
| * condition otherwise which results in possible performance loss | |
| * especially if the ixgbe_msix_other interrupt is triggering | |
| * consistently (as it would when PPS is turned on for the X540 device) | |
| */ | |
| eicr &= 0xFFFF0000; | |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr); | |
| if (eicr & IXGBE_EICR_LSC) | |
| ixgbe_check_lsc(adapter); | |
| if (eicr & IXGBE_EICR_MAILBOX) | |
| ixgbe_msg_task(adapter); | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| if (hw->phy.type == ixgbe_phy_x550em_ext_t && | |
| (eicr & IXGBE_EICR_GPI_SDP0_X540)) { | |
| adapter->flags2 |= IXGBE_FLAG2_PHY_INTERRUPT; | |
| ixgbe_service_event_schedule(adapter); | |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, | |
| IXGBE_EICR_GPI_SDP0_X540); | |
| } | |
| if (eicr & IXGBE_EICR_ECC) { | |
| e_info(link, "Received ECC Err, initiating reset\n"); | |
| set_bit(__IXGBE_RESET_REQUESTED, &adapter->state); | |
| ixgbe_service_event_schedule(adapter); | |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC); | |
| } | |
| /* Handle Flow Director Full threshold interrupt */ | |
| if (eicr & IXGBE_EICR_FLOW_DIR) { | |
| int reinit_count = 0; | |
| int i; | |
| for (i = 0; i < adapter->num_tx_queues; i++) { | |
| struct ixgbe_ring *ring = adapter->tx_ring[i]; | |
| if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE, | |
| &ring->state)) | |
| reinit_count++; | |
| } | |
| if (reinit_count) { | |
| /* no more flow director interrupts until after init */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR); | |
| adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT; | |
| ixgbe_service_event_schedule(adapter); | |
| } | |
| } | |
| ixgbe_check_sfp_event(adapter, eicr); | |
| ixgbe_check_overtemp_event(adapter, eicr); | |
| break; | |
| default: | |
| break; | |
| } | |
| ixgbe_check_fan_failure(adapter, eicr); | |
| if (unlikely(eicr & IXGBE_EICR_TIMESYNC)) | |
| ixgbe_ptp_check_pps_event(adapter); | |
| /* re-enable the original interrupt state, no lsc, no queues */ | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) | |
| ixgbe_irq_enable(adapter, false, false); | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t ixgbe_msix_clean_rings(int irq, void *data) | |
| { | |
| struct ixgbe_q_vector *q_vector = data; | |
| /* EIAM disabled interrupts (on this vector) for us */ | |
| if (q_vector->rx.ring || q_vector->tx.ring) | |
| napi_schedule_irqoff(&q_vector->napi); | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * ixgbe_poll - NAPI Rx polling callback | |
| * @napi: structure for representing this polling device | |
| * @budget: how many packets driver is allowed to clean | |
| * | |
| * This function is used for legacy and MSI, NAPI mode | |
| **/ | |
| int ixgbe_poll(struct napi_struct *napi, int budget) | |
| { | |
| struct ixgbe_q_vector *q_vector = | |
| container_of(napi, struct ixgbe_q_vector, napi); | |
| struct ixgbe_adapter *adapter = q_vector->adapter; | |
| struct ixgbe_ring *ring; | |
| int per_ring_budget, work_done = 0; | |
| bool clean_complete = true; | |
| #ifdef CONFIG_IXGBE_DCA | |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) | |
| ixgbe_update_dca(q_vector); | |
| #endif | |
| ixgbe_for_each_ring(ring, q_vector->tx) { | |
| if (!ixgbe_clean_tx_irq(q_vector, ring, budget)) | |
| clean_complete = false; | |
| } | |
| /* Exit if we are called by netpoll */ | |
| if (budget <= 0) | |
| return budget; | |
| /* attempt to distribute budget to each queue fairly, but don't allow | |
| * the budget to go below 1 because we'll exit polling */ | |
| if (q_vector->rx.count > 1) | |
| per_ring_budget = max(budget/q_vector->rx.count, 1); | |
| else | |
| per_ring_budget = budget; | |
| ixgbe_for_each_ring(ring, q_vector->rx) { | |
| int cleaned = ixgbe_clean_rx_irq(q_vector, ring, | |
| per_ring_budget); | |
| work_done += cleaned; | |
| if (cleaned >= per_ring_budget) | |
| clean_complete = false; | |
| } | |
| /* If all work not completed, return budget and keep polling */ | |
| if (!clean_complete) | |
| return budget; | |
| /* all work done, exit the polling mode */ | |
| napi_complete_done(napi, work_done); | |
| if (adapter->rx_itr_setting & 1) | |
| ixgbe_set_itr(q_vector); | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) | |
| ixgbe_irq_enable_queues(adapter, BIT_ULL(q_vector->v_idx)); | |
| return min(work_done, budget - 1); | |
| } | |
| /** | |
| * ixgbe_request_msix_irqs - Initialize MSI-X interrupts | |
| * @adapter: board private structure | |
| * | |
| * ixgbe_request_msix_irqs allocates MSI-X vectors and requests | |
| * interrupts from the kernel. | |
| **/ | |
| static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| unsigned int ri = 0, ti = 0; | |
| int vector, err; | |
| for (vector = 0; vector < adapter->num_q_vectors; vector++) { | |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[vector]; | |
| struct msix_entry *entry = &adapter->msix_entries[vector]; | |
| if (q_vector->tx.ring && q_vector->rx.ring) { | |
| snprintf(q_vector->name, sizeof(q_vector->name), | |
| "%s-TxRx-%u", netdev->name, ri++); | |
| ti++; | |
| } else if (q_vector->rx.ring) { | |
| snprintf(q_vector->name, sizeof(q_vector->name), | |
| "%s-rx-%u", netdev->name, ri++); | |
| } else if (q_vector->tx.ring) { | |
| snprintf(q_vector->name, sizeof(q_vector->name), | |
| "%s-tx-%u", netdev->name, ti++); | |
| } else { | |
| /* skip this unused q_vector */ | |
| continue; | |
| } | |
| err = request_irq(entry->vector, &ixgbe_msix_clean_rings, 0, | |
| q_vector->name, q_vector); | |
| if (err) { | |
| e_err(probe, "request_irq failed for MSIX interrupt " | |
| "Error: %d\n", err); | |
| goto free_queue_irqs; | |
| } | |
| /* If Flow Director is enabled, set interrupt affinity */ | |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { | |
| /* assign the mask for this irq */ | |
| irq_set_affinity_hint(entry->vector, | |
| &q_vector->affinity_mask); | |
| } | |
| } | |
| err = request_irq(adapter->msix_entries[vector].vector, | |
| ixgbe_msix_other, 0, netdev->name, adapter); | |
| if (err) { | |
| e_err(probe, "request_irq for msix_other failed: %d\n", err); | |
| goto free_queue_irqs; | |
| } | |
| return 0; | |
| free_queue_irqs: | |
| while (vector) { | |
| vector--; | |
| irq_set_affinity_hint(adapter->msix_entries[vector].vector, | |
| NULL); | |
| free_irq(adapter->msix_entries[vector].vector, | |
| adapter->q_vector[vector]); | |
| } | |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; | |
| pci_disable_msix(adapter->pdev); | |
| kfree(adapter->msix_entries); | |
| adapter->msix_entries = NULL; | |
| return err; | |
| } | |
| /** | |
| * ixgbe_intr - legacy mode Interrupt Handler | |
| * @irq: interrupt number | |
| * @data: pointer to a network interface device structure | |
| **/ | |
| static irqreturn_t ixgbe_intr(int irq, void *data) | |
| { | |
| struct ixgbe_adapter *adapter = data; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[0]; | |
| u32 eicr; | |
| /* | |
| * Workaround for silicon errata #26 on 82598. Mask the interrupt | |
| * before the read of EICR. | |
| */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); | |
| /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read | |
| * therefore no explicit interrupt disable is necessary */ | |
| eicr = IXGBE_READ_REG(hw, IXGBE_EICR); | |
| if (!eicr) { | |
| /* | |
| * shared interrupt alert! | |
| * make sure interrupts are enabled because the read will | |
| * have disabled interrupts due to EIAM | |
| * finish the workaround of silicon errata on 82598. Unmask | |
| * the interrupt that we masked before the EICR read. | |
| */ | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) | |
| ixgbe_irq_enable(adapter, true, true); | |
| return IRQ_NONE; /* Not our interrupt */ | |
| } | |
| if (eicr & IXGBE_EICR_LSC) | |
| ixgbe_check_lsc(adapter); | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82599EB: | |
| ixgbe_check_sfp_event(adapter, eicr); | |
| /* Fall through */ | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| if (eicr & IXGBE_EICR_ECC) { | |
| e_info(link, "Received ECC Err, initiating reset\n"); | |
| set_bit(__IXGBE_RESET_REQUESTED, &adapter->state); | |
| ixgbe_service_event_schedule(adapter); | |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC); | |
| } | |
| ixgbe_check_overtemp_event(adapter, eicr); | |
| break; | |
| default: | |
| break; | |
| } | |
| ixgbe_check_fan_failure(adapter, eicr); | |
| if (unlikely(eicr & IXGBE_EICR_TIMESYNC)) | |
| ixgbe_ptp_check_pps_event(adapter); | |
| /* would disable interrupts here but EIAM disabled it */ | |
| napi_schedule_irqoff(&q_vector->napi); | |
| /* | |
| * re-enable link(maybe) and non-queue interrupts, no flush. | |
| * ixgbe_poll will re-enable the queue interrupts | |
| */ | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) | |
| ixgbe_irq_enable(adapter, false, false); | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * ixgbe_request_irq - initialize interrupts | |
| * @adapter: board private structure | |
| * | |
| * Attempts to configure interrupts using the best available | |
| * capabilities of the hardware and kernel. | |
| **/ | |
| static int ixgbe_request_irq(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| int err; | |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) | |
| err = ixgbe_request_msix_irqs(adapter); | |
| else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) | |
| err = request_irq(adapter->pdev->irq, ixgbe_intr, 0, | |
| netdev->name, adapter); | |
| else | |
| err = request_irq(adapter->pdev->irq, ixgbe_intr, IRQF_SHARED, | |
| netdev->name, adapter); | |
| if (err) | |
| e_err(probe, "request_irq failed, Error %d\n", err); | |
| return err; | |
| } | |
| static void ixgbe_free_irq(struct ixgbe_adapter *adapter) | |
| { | |
| int vector; | |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { | |
| free_irq(adapter->pdev->irq, adapter); | |
| return; | |
| } | |
| if (!adapter->msix_entries) | |
| return; | |
| for (vector = 0; vector < adapter->num_q_vectors; vector++) { | |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[vector]; | |
| struct msix_entry *entry = &adapter->msix_entries[vector]; | |
| /* free only the irqs that were actually requested */ | |
| if (!q_vector->rx.ring && !q_vector->tx.ring) | |
| continue; | |
| /* clear the affinity_mask in the IRQ descriptor */ | |
| irq_set_affinity_hint(entry->vector, NULL); | |
| free_irq(entry->vector, q_vector); | |
| } | |
| free_irq(adapter->msix_entries[vector].vector, adapter); | |
| } | |
| /** | |
| * ixgbe_irq_disable - Mask off interrupt generation on the NIC | |
| * @adapter: board private structure | |
| **/ | |
| static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) | |
| { | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82598EB: | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0); | |
| break; | |
| default: | |
| break; | |
| } | |
| IXGBE_WRITE_FLUSH(&adapter->hw); | |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { | |
| int vector; | |
| for (vector = 0; vector < adapter->num_q_vectors; vector++) | |
| synchronize_irq(adapter->msix_entries[vector].vector); | |
| synchronize_irq(adapter->msix_entries[vector++].vector); | |
| } else { | |
| synchronize_irq(adapter->pdev->irq); | |
| } | |
| } | |
| /** | |
| * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts | |
| * | |
| **/ | |
| static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[0]; | |
| ixgbe_write_eitr(q_vector); | |
| ixgbe_set_ivar(adapter, 0, 0, 0); | |
| ixgbe_set_ivar(adapter, 1, 0, 0); | |
| e_info(hw, "Legacy interrupt IVAR setup done\n"); | |
| } | |
| /** | |
| * ixgbe_configure_tx_ring - Configure 8259x Tx ring after Reset | |
| * @adapter: board private structure | |
| * @ring: structure containing ring specific data | |
| * | |
| * Configure the Tx descriptor ring after a reset. | |
| **/ | |
| void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *ring) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u64 tdba = ring->dma; | |
| int wait_loop = 10; | |
| u32 txdctl = IXGBE_TXDCTL_ENABLE; | |
| u8 reg_idx = ring->reg_idx; | |
| /* disable queue to avoid issues while updating state */ | |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), 0); | |
| IXGBE_WRITE_FLUSH(hw); | |
| IXGBE_WRITE_REG(hw, IXGBE_TDBAL(reg_idx), | |
| (tdba & DMA_BIT_MASK(32))); | |
| IXGBE_WRITE_REG(hw, IXGBE_TDBAH(reg_idx), (tdba >> 32)); | |
| IXGBE_WRITE_REG(hw, IXGBE_TDLEN(reg_idx), | |
| ring->count * sizeof(union ixgbe_adv_tx_desc)); | |
| IXGBE_WRITE_REG(hw, IXGBE_TDH(reg_idx), 0); | |
| IXGBE_WRITE_REG(hw, IXGBE_TDT(reg_idx), 0); | |
| ring->tail = adapter->io_addr + IXGBE_TDT(reg_idx); | |
| /* | |
| * set WTHRESH to encourage burst writeback, it should not be set | |
| * higher than 1 when: | |
| * - ITR is 0 as it could cause false TX hangs | |
| * - ITR is set to > 100k int/sec and BQL is enabled | |
| * | |
| * In order to avoid issues WTHRESH + PTHRESH should always be equal | |
| * to or less than the number of on chip descriptors, which is | |
| * currently 40. | |
| */ | |
| if (!ring->q_vector || (ring->q_vector->itr < IXGBE_100K_ITR)) | |
| txdctl |= 1u << 16; /* WTHRESH = 1 */ | |
| else | |
| txdctl |= 8u << 16; /* WTHRESH = 8 */ | |
| /* | |
| * Setting PTHRESH to 32 both improves performance | |
| * and avoids a TX hang with DFP enabled | |
| */ | |
| txdctl |= (1u << 8) | /* HTHRESH = 1 */ | |
| 32; /* PTHRESH = 32 */ | |
| /* reinitialize flowdirector state */ | |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { | |
| ring->atr_sample_rate = adapter->atr_sample_rate; | |
| ring->atr_count = 0; | |
| set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state); | |
| } else { | |
| ring->atr_sample_rate = 0; | |
| } | |
| /* initialize XPS */ | |
| if (!test_and_set_bit(__IXGBE_TX_XPS_INIT_DONE, &ring->state)) { | |
| struct ixgbe_q_vector *q_vector = ring->q_vector; | |
| if (q_vector) | |
| netif_set_xps_queue(ring->netdev, | |
| &q_vector->affinity_mask, | |
| ring->queue_index); | |
| } | |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state); | |
| /* reinitialize tx_buffer_info */ | |
| memset(ring->tx_buffer_info, 0, | |
| sizeof(struct ixgbe_tx_buffer) * ring->count); | |
| /* enable queue */ | |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), txdctl); | |
| /* TXDCTL.EN will return 0 on 82598 if link is down, so skip it */ | |
| if (hw->mac.type == ixgbe_mac_82598EB && | |
| !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) | |
| return; | |
| /* poll to verify queue is enabled */ | |
| do { | |
| usleep_range(1000, 2000); | |
| txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx)); | |
| } while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE)); | |
| if (!wait_loop) | |
| hw_dbg(hw, "Could not enable Tx Queue %d\n", reg_idx); | |
| } | |
| static void ixgbe_setup_mtqc(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 rttdcs, mtqc; | |
| u8 tcs = netdev_get_num_tc(adapter->netdev); | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| return; | |
| /* disable the arbiter while setting MTQC */ | |
| rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); | |
| rttdcs |= IXGBE_RTTDCS_ARBDIS; | |
| IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); | |
| /* set transmit pool layout */ | |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { | |
| mtqc = IXGBE_MTQC_VT_ENA; | |
| if (tcs > 4) | |
| mtqc |= IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ; | |
| else if (tcs > 1) | |
| mtqc |= IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ; | |
| else if (adapter->ring_feature[RING_F_VMDQ].mask == | |
| IXGBE_82599_VMDQ_4Q_MASK) | |
| mtqc |= IXGBE_MTQC_32VF; | |
| else | |
| mtqc |= IXGBE_MTQC_64VF; | |
| } else { | |
| if (tcs > 4) | |
| mtqc = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ; | |
| else if (tcs > 1) | |
| mtqc = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ; | |
| else | |
| mtqc = IXGBE_MTQC_64Q_1PB; | |
| } | |
| IXGBE_WRITE_REG(hw, IXGBE_MTQC, mtqc); | |
| /* Enable Security TX Buffer IFG for multiple pb */ | |
| if (tcs) { | |
| u32 sectx = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG); | |
| sectx |= IXGBE_SECTX_DCB; | |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, sectx); | |
| } | |
| /* re-enable the arbiter */ | |
| rttdcs &= ~IXGBE_RTTDCS_ARBDIS; | |
| IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); | |
| } | |
| /** | |
| * ixgbe_configure_tx - Configure 8259x Transmit Unit after Reset | |
| * @adapter: board private structure | |
| * | |
| * Configure the Tx unit of the MAC after a reset. | |
| **/ | |
| static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 dmatxctl; | |
| u32 i; | |
| ixgbe_setup_mtqc(adapter); | |
| if (hw->mac.type != ixgbe_mac_82598EB) { | |
| /* DMATXCTL.EN must be before Tx queues are enabled */ | |
| dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); | |
| dmatxctl |= IXGBE_DMATXCTL_TE; | |
| IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl); | |
| } | |
| /* Setup the HW Tx Head and Tail descriptor pointers */ | |
| for (i = 0; i < adapter->num_tx_queues; i++) | |
| ixgbe_configure_tx_ring(adapter, adapter->tx_ring[i]); | |
| for (i = 0; i < adapter->num_xdp_queues; i++) | |
| ixgbe_configure_tx_ring(adapter, adapter->xdp_ring[i]); | |
| } | |
| static void ixgbe_enable_rx_drop(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *ring) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u8 reg_idx = ring->reg_idx; | |
| u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx)); | |
| srrctl |= IXGBE_SRRCTL_DROP_EN; | |
| IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl); | |
| } | |
| static void ixgbe_disable_rx_drop(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *ring) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u8 reg_idx = ring->reg_idx; | |
| u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx)); | |
| srrctl &= ~IXGBE_SRRCTL_DROP_EN; | |
| IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl); | |
| } | |
| #ifdef CONFIG_IXGBE_DCB | |
| void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter) | |
| #else | |
| static void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter) | |
| #endif | |
| { | |
| int i; | |
| bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; | |
| if (adapter->ixgbe_ieee_pfc) | |
| pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); | |
| /* | |
| * We should set the drop enable bit if: | |
| * SR-IOV is enabled | |
| * or | |
| * Number of Rx queues > 1 and flow control is disabled | |
| * | |
| * This allows us to avoid head of line blocking for security | |
| * and performance reasons. | |
| */ | |
| if (adapter->num_vfs || (adapter->num_rx_queues > 1 && | |
| !(adapter->hw.fc.current_mode & ixgbe_fc_tx_pause) && !pfc_en)) { | |
| for (i = 0; i < adapter->num_rx_queues; i++) | |
| ixgbe_enable_rx_drop(adapter, adapter->rx_ring[i]); | |
| } else { | |
| for (i = 0; i < adapter->num_rx_queues; i++) | |
| ixgbe_disable_rx_drop(adapter, adapter->rx_ring[i]); | |
| } | |
| } | |
| #define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 | |
| static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *rx_ring) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 srrctl; | |
| u8 reg_idx = rx_ring->reg_idx; | |
| if (hw->mac.type == ixgbe_mac_82598EB) { | |
| u16 mask = adapter->ring_feature[RING_F_RSS].mask; | |
| /* | |
| * if VMDq is not active we must program one srrctl register | |
| * per RSS queue since we have enabled RDRXCTL.MVMEN | |
| */ | |
| reg_idx &= mask; | |
| } | |
| /* configure header buffer length, needed for RSC */ | |
| srrctl = IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT; | |
| /* configure the packet buffer length */ | |
| if (test_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state)) | |
| srrctl |= IXGBE_RXBUFFER_3K >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; | |
| else | |
| srrctl |= IXGBE_RXBUFFER_2K >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; | |
| /* configure descriptor type */ | |
| srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; | |
| IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl); | |
| } | |
| /** | |
| * ixgbe_rss_indir_tbl_entries - Return RSS indirection table entries | |
| * @adapter: device handle | |
| * | |
| * - 82598/82599/X540: 128 | |
| * - X550(non-SRIOV mode): 512 | |
| * - X550(SRIOV mode): 64 | |
| */ | |
| u32 ixgbe_rss_indir_tbl_entries(struct ixgbe_adapter *adapter) | |
| { | |
| if (adapter->hw.mac.type < ixgbe_mac_X550) | |
| return 128; | |
| else if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) | |
| return 64; | |
| else | |
| return 512; | |
| } | |
| /** | |
| * ixgbe_store_key - Write the RSS key to HW | |
| * @adapter: device handle | |
| * | |
| * Write the RSS key stored in adapter.rss_key to HW. | |
| */ | |
| void ixgbe_store_key(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i; | |
| for (i = 0; i < 10; i++) | |
| IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), adapter->rss_key[i]); | |
| } | |
| /** | |
| * ixgbe_init_rss_key - Initialize adapter RSS key | |
| * @adapter: device handle | |
| * | |
| * Allocates and initializes the RSS key if it is not allocated. | |
| **/ | |
| static inline int ixgbe_init_rss_key(struct ixgbe_adapter *adapter) | |
| { | |
| u32 *rss_key; | |
| if (!adapter->rss_key) { | |
| rss_key = kzalloc(IXGBE_RSS_KEY_SIZE, GFP_KERNEL); | |
| if (unlikely(!rss_key)) | |
| return -ENOMEM; | |
| netdev_rss_key_fill(rss_key, IXGBE_RSS_KEY_SIZE); | |
| adapter->rss_key = rss_key; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_store_reta - Write the RETA table to HW | |
| * @adapter: device handle | |
| * | |
| * Write the RSS redirection table stored in adapter.rss_indir_tbl[] to HW. | |
| */ | |
| void ixgbe_store_reta(struct ixgbe_adapter *adapter) | |
| { | |
| u32 i, reta_entries = ixgbe_rss_indir_tbl_entries(adapter); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 reta = 0; | |
| u32 indices_multi; | |
| u8 *indir_tbl = adapter->rss_indir_tbl; | |
| /* Fill out the redirection table as follows: | |
| * - 82598: 8 bit wide entries containing pair of 4 bit RSS | |
| * indices. | |
| * - 82599/X540: 8 bit wide entries containing 4 bit RSS index | |
| * - X550: 8 bit wide entries containing 6 bit RSS index | |
| */ | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) | |
| indices_multi = 0x11; | |
| else | |
| indices_multi = 0x1; | |
| /* Write redirection table to HW */ | |
| for (i = 0; i < reta_entries; i++) { | |
| reta |= indices_multi * indir_tbl[i] << (i & 0x3) * 8; | |
| if ((i & 3) == 3) { | |
| if (i < 128) | |
| IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta); | |
| else | |
| IXGBE_WRITE_REG(hw, IXGBE_ERETA((i >> 2) - 32), | |
| reta); | |
| reta = 0; | |
| } | |
| } | |
| } | |
| /** | |
| * ixgbe_store_vfreta - Write the RETA table to HW (x550 devices in SRIOV mode) | |
| * @adapter: device handle | |
| * | |
| * Write the RSS redirection table stored in adapter.rss_indir_tbl[] to HW. | |
| */ | |
| static void ixgbe_store_vfreta(struct ixgbe_adapter *adapter) | |
| { | |
| u32 i, reta_entries = ixgbe_rss_indir_tbl_entries(adapter); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 vfreta = 0; | |
| unsigned int pf_pool = adapter->num_vfs; | |
| /* Write redirection table to HW */ | |
| for (i = 0; i < reta_entries; i++) { | |
| vfreta |= (u32)adapter->rss_indir_tbl[i] << (i & 0x3) * 8; | |
| if ((i & 3) == 3) { | |
| IXGBE_WRITE_REG(hw, IXGBE_PFVFRETA(i >> 2, pf_pool), | |
| vfreta); | |
| vfreta = 0; | |
| } | |
| } | |
| } | |
| static void ixgbe_setup_reta(struct ixgbe_adapter *adapter) | |
| { | |
| u32 i, j; | |
| u32 reta_entries = ixgbe_rss_indir_tbl_entries(adapter); | |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].indices; | |
| /* Program table for at least 4 queues w/ SR-IOV so that VFs can | |
| * make full use of any rings they may have. We will use the | |
| * PSRTYPE register to control how many rings we use within the PF. | |
| */ | |
| if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (rss_i < 4)) | |
| rss_i = 4; | |
| /* Fill out hash function seeds */ | |
| ixgbe_store_key(adapter); | |
| /* Fill out redirection table */ | |
| memset(adapter->rss_indir_tbl, 0, sizeof(adapter->rss_indir_tbl)); | |
| for (i = 0, j = 0; i < reta_entries; i++, j++) { | |
| if (j == rss_i) | |
| j = 0; | |
| adapter->rss_indir_tbl[i] = j; | |
| } | |
| ixgbe_store_reta(adapter); | |
| } | |
| static void ixgbe_setup_vfreta(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].indices; | |
| unsigned int pf_pool = adapter->num_vfs; | |
| int i, j; | |
| /* Fill out hash function seeds */ | |
| for (i = 0; i < 10; i++) | |
| IXGBE_WRITE_REG(hw, IXGBE_PFVFRSSRK(i, pf_pool), | |
| *(adapter->rss_key + i)); | |
| /* Fill out the redirection table */ | |
| for (i = 0, j = 0; i < 64; i++, j++) { | |
| if (j == rss_i) | |
| j = 0; | |
| adapter->rss_indir_tbl[i] = j; | |
| } | |
| ixgbe_store_vfreta(adapter); | |
| } | |
| static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 mrqc = 0, rss_field = 0, vfmrqc = 0; | |
| u32 rxcsum; | |
| /* Disable indicating checksum in descriptor, enables RSS hash */ | |
| rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); | |
| rxcsum |= IXGBE_RXCSUM_PCSD; | |
| IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) { | |
| if (adapter->ring_feature[RING_F_RSS].mask) | |
| mrqc = IXGBE_MRQC_RSSEN; | |
| } else { | |
| u8 tcs = netdev_get_num_tc(adapter->netdev); | |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { | |
| if (tcs > 4) | |
| mrqc = IXGBE_MRQC_VMDQRT8TCEN; /* 8 TCs */ | |
| else if (tcs > 1) | |
| mrqc = IXGBE_MRQC_VMDQRT4TCEN; /* 4 TCs */ | |
| else if (adapter->ring_feature[RING_F_VMDQ].mask == | |
| IXGBE_82599_VMDQ_4Q_MASK) | |
| mrqc = IXGBE_MRQC_VMDQRSS32EN; | |
| else | |
| mrqc = IXGBE_MRQC_VMDQRSS64EN; | |
| /* Enable L3/L4 for Tx Switched packets */ | |
| mrqc |= IXGBE_MRQC_L3L4TXSWEN; | |
| } else { | |
| if (tcs > 4) | |
| mrqc = IXGBE_MRQC_RTRSS8TCEN; | |
| else if (tcs > 1) | |
| mrqc = IXGBE_MRQC_RTRSS4TCEN; | |
| else | |
| mrqc = IXGBE_MRQC_RSSEN; | |
| } | |
| } | |
| /* Perform hash on these packet types */ | |
| rss_field |= IXGBE_MRQC_RSS_FIELD_IPV4 | | |
| IXGBE_MRQC_RSS_FIELD_IPV4_TCP | | |
| IXGBE_MRQC_RSS_FIELD_IPV6 | | |
| IXGBE_MRQC_RSS_FIELD_IPV6_TCP; | |
| if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP) | |
| rss_field |= IXGBE_MRQC_RSS_FIELD_IPV4_UDP; | |
| if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP) | |
| rss_field |= IXGBE_MRQC_RSS_FIELD_IPV6_UDP; | |
| if ((hw->mac.type >= ixgbe_mac_X550) && | |
| (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) { | |
| unsigned int pf_pool = adapter->num_vfs; | |
| /* Enable VF RSS mode */ | |
| mrqc |= IXGBE_MRQC_MULTIPLE_RSS; | |
| IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); | |
| /* Setup RSS through the VF registers */ | |
| ixgbe_setup_vfreta(adapter); | |
| vfmrqc = IXGBE_MRQC_RSSEN; | |
| vfmrqc |= rss_field; | |
| IXGBE_WRITE_REG(hw, IXGBE_PFVFMRQC(pf_pool), vfmrqc); | |
| } else { | |
| ixgbe_setup_reta(adapter); | |
| mrqc |= rss_field; | |
| IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); | |
| } | |
| } | |
| /** | |
| * ixgbe_configure_rscctl - enable RSC for the indicated ring | |
| * @adapter: address of board private structure | |
| * @index: index of ring to set | |
| **/ | |
| static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *ring) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 rscctrl; | |
| u8 reg_idx = ring->reg_idx; | |
| if (!ring_is_rsc_enabled(ring)) | |
| return; | |
| rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(reg_idx)); | |
| rscctrl |= IXGBE_RSCCTL_RSCEN; | |
| /* | |
| * we must limit the number of descriptors so that the | |
| * total size of max desc * buf_len is not greater | |
| * than 65536 | |
| */ | |
| rscctrl |= IXGBE_RSCCTL_MAXDESC_16; | |
| IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(reg_idx), rscctrl); | |
| } | |
| #define IXGBE_MAX_RX_DESC_POLL 10 | |
| static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *ring) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int wait_loop = IXGBE_MAX_RX_DESC_POLL; | |
| u32 rxdctl; | |
| u8 reg_idx = ring->reg_idx; | |
| if (ixgbe_removed(hw->hw_addr)) | |
| return; | |
| /* RXDCTL.EN will return 0 on 82598 if link is down, so skip it */ | |
| if (hw->mac.type == ixgbe_mac_82598EB && | |
| !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) | |
| return; | |
| do { | |
| usleep_range(1000, 2000); | |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); | |
| } while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE)); | |
| if (!wait_loop) { | |
| e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within " | |
| "the polling period\n", reg_idx); | |
| } | |
| } | |
| void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *ring) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int wait_loop = IXGBE_MAX_RX_DESC_POLL; | |
| u32 rxdctl; | |
| u8 reg_idx = ring->reg_idx; | |
| if (ixgbe_removed(hw->hw_addr)) | |
| return; | |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); | |
| rxdctl &= ~IXGBE_RXDCTL_ENABLE; | |
| /* write value back with RXDCTL.ENABLE bit cleared */ | |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl); | |
| if (hw->mac.type == ixgbe_mac_82598EB && | |
| !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) | |
| return; | |
| /* the hardware may take up to 100us to really disable the rx queue */ | |
| do { | |
| udelay(10); | |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); | |
| } while (--wait_loop && (rxdctl & IXGBE_RXDCTL_ENABLE)); | |
| if (!wait_loop) { | |
| e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within " | |
| "the polling period\n", reg_idx); | |
| } | |
| } | |
| void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *ring) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| union ixgbe_adv_rx_desc *rx_desc; | |
| u64 rdba = ring->dma; | |
| u32 rxdctl; | |
| u8 reg_idx = ring->reg_idx; | |
| /* disable queue to avoid issues while updating state */ | |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); | |
| ixgbe_disable_rx_queue(adapter, ring); | |
| IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32))); | |
| IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32)); | |
| IXGBE_WRITE_REG(hw, IXGBE_RDLEN(reg_idx), | |
| ring->count * sizeof(union ixgbe_adv_rx_desc)); | |
| /* Force flushing of IXGBE_RDLEN to prevent MDD */ | |
| IXGBE_WRITE_FLUSH(hw); | |
| IXGBE_WRITE_REG(hw, IXGBE_RDH(reg_idx), 0); | |
| IXGBE_WRITE_REG(hw, IXGBE_RDT(reg_idx), 0); | |
| ring->tail = adapter->io_addr + IXGBE_RDT(reg_idx); | |
| ixgbe_configure_srrctl(adapter, ring); | |
| ixgbe_configure_rscctl(adapter, ring); | |
| if (hw->mac.type == ixgbe_mac_82598EB) { | |
| /* | |
| * enable cache line friendly hardware writes: | |
| * PTHRESH=32 descriptors (half the internal cache), | |
| * this also removes ugly rx_no_buffer_count increment | |
| * HTHRESH=4 descriptors (to minimize latency on fetch) | |
| * WTHRESH=8 burst writeback up to two cache lines | |
| */ | |
| rxdctl &= ~0x3FFFFF; | |
| rxdctl |= 0x080420; | |
| #if (PAGE_SIZE < 8192) | |
| } else { | |
| rxdctl &= ~(IXGBE_RXDCTL_RLPMLMASK | | |
| IXGBE_RXDCTL_RLPML_EN); | |
| /* Limit the maximum frame size so we don't overrun the skb */ | |
| if (ring_uses_build_skb(ring) && | |
| !test_bit(__IXGBE_RX_3K_BUFFER, &ring->state)) | |
| rxdctl |= IXGBE_MAX_2K_FRAME_BUILD_SKB | | |
| IXGBE_RXDCTL_RLPML_EN; | |
| #endif | |
| } | |
| /* initialize rx_buffer_info */ | |
| memset(ring->rx_buffer_info, 0, | |
| sizeof(struct ixgbe_rx_buffer) * ring->count); | |
| /* initialize Rx descriptor 0 */ | |
| rx_desc = IXGBE_RX_DESC(ring, 0); | |
| rx_desc->wb.upper.length = 0; | |
| /* enable receive descriptor ring */ | |
| rxdctl |= IXGBE_RXDCTL_ENABLE; | |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl); | |
| ixgbe_rx_desc_queue_enable(adapter, ring); | |
| ixgbe_alloc_rx_buffers(ring, ixgbe_desc_unused(ring)); | |
| } | |
| static void ixgbe_setup_psrtype(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int rss_i = adapter->ring_feature[RING_F_RSS].indices; | |
| u16 pool; | |
| /* PSRTYPE must be initialized in non 82598 adapters */ | |
| u32 psrtype = IXGBE_PSRTYPE_TCPHDR | | |
| IXGBE_PSRTYPE_UDPHDR | | |
| IXGBE_PSRTYPE_IPV4HDR | | |
| IXGBE_PSRTYPE_L2HDR | | |
| IXGBE_PSRTYPE_IPV6HDR; | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| return; | |
| if (rss_i > 3) | |
| psrtype |= 2u << 29; | |
| else if (rss_i > 1) | |
| psrtype |= 1u << 29; | |
| for_each_set_bit(pool, &adapter->fwd_bitmask, 32) | |
| IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(VMDQ_P(pool)), psrtype); | |
| } | |
| static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 reg_offset, vf_shift; | |
| u32 gcr_ext, vmdctl; | |
| int i; | |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) | |
| return; | |
| vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL); | |
| vmdctl |= IXGBE_VMD_CTL_VMDQ_EN; | |
| vmdctl &= ~IXGBE_VT_CTL_POOL_MASK; | |
| vmdctl |= VMDQ_P(0) << IXGBE_VT_CTL_POOL_SHIFT; | |
| vmdctl |= IXGBE_VT_CTL_REPLEN; | |
| IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl); | |
| vf_shift = VMDQ_P(0) % 32; | |
| reg_offset = (VMDQ_P(0) >= 32) ? 1 : 0; | |
| /* Enable only the PF's pool for Tx/Rx */ | |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), GENMASK(31, vf_shift)); | |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset ^ 1), reg_offset - 1); | |
| IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), GENMASK(31, vf_shift)); | |
| IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset ^ 1), reg_offset - 1); | |
| if (adapter->bridge_mode == BRIDGE_MODE_VEB) | |
| IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN); | |
| /* Map PF MAC address in RAR Entry 0 to first pool following VFs */ | |
| hw->mac.ops.set_vmdq(hw, 0, VMDQ_P(0)); | |
| /* clear VLAN promisc flag so VFTA will be updated if necessary */ | |
| adapter->flags2 &= ~IXGBE_FLAG2_VLAN_PROMISC; | |
| /* | |
| * Set up VF register offsets for selected VT Mode, | |
| * i.e. 32 or 64 VFs for SR-IOV | |
| */ | |
| switch (adapter->ring_feature[RING_F_VMDQ].mask) { | |
| case IXGBE_82599_VMDQ_8Q_MASK: | |
| gcr_ext = IXGBE_GCR_EXT_VT_MODE_16; | |
| break; | |
| case IXGBE_82599_VMDQ_4Q_MASK: | |
| gcr_ext = IXGBE_GCR_EXT_VT_MODE_32; | |
| break; | |
| default: | |
| gcr_ext = IXGBE_GCR_EXT_VT_MODE_64; | |
| break; | |
| } | |
| IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); | |
| for (i = 0; i < adapter->num_vfs; i++) { | |
| /* configure spoof checking */ | |
| ixgbe_ndo_set_vf_spoofchk(adapter->netdev, i, | |
| adapter->vfinfo[i].spoofchk_enabled); | |
| /* Enable/Disable RSS query feature */ | |
| ixgbe_ndo_set_vf_rss_query_en(adapter->netdev, i, | |
| adapter->vfinfo[i].rss_query_enabled); | |
| } | |
| } | |
| static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct net_device *netdev = adapter->netdev; | |
| int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; | |
| struct ixgbe_ring *rx_ring; | |
| int i; | |
| u32 mhadd, hlreg0; | |
| #ifdef IXGBE_FCOE | |
| /* adjust max frame to be able to do baby jumbo for FCoE */ | |
| if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && | |
| (max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE)) | |
| max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE; | |
| #endif /* IXGBE_FCOE */ | |
| /* adjust max frame to be at least the size of a standard frame */ | |
| if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) | |
| max_frame = (ETH_FRAME_LEN + ETH_FCS_LEN); | |
| mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); | |
| if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) { | |
| mhadd &= ~IXGBE_MHADD_MFS_MASK; | |
| mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT; | |
| IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd); | |
| } | |
| hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); | |
| /* set jumbo enable since MHADD.MFS is keeping size locked at max_frame */ | |
| hlreg0 |= IXGBE_HLREG0_JUMBOEN; | |
| IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); | |
| /* | |
| * Setup the HW Rx Head and Tail Descriptor Pointers and | |
| * the Base and Length of the Rx Descriptor Ring | |
| */ | |
| for (i = 0; i < adapter->num_rx_queues; i++) { | |
| rx_ring = adapter->rx_ring[i]; | |
| clear_ring_rsc_enabled(rx_ring); | |
| clear_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state); | |
| clear_bit(__IXGBE_RX_BUILD_SKB_ENABLED, &rx_ring->state); | |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) | |
| set_ring_rsc_enabled(rx_ring); | |
| if (test_bit(__IXGBE_RX_FCOE, &rx_ring->state)) | |
| set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state); | |
| clear_bit(__IXGBE_RX_BUILD_SKB_ENABLED, &rx_ring->state); | |
| if (adapter->flags2 & IXGBE_FLAG2_RX_LEGACY) | |
| continue; | |
| set_bit(__IXGBE_RX_BUILD_SKB_ENABLED, &rx_ring->state); | |
| #if (PAGE_SIZE < 8192) | |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) | |
| set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state); | |
| if (IXGBE_2K_TOO_SMALL_WITH_PADDING || | |
| (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))) | |
| set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state); | |
| #endif | |
| } | |
| } | |
| static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| /* | |
| * For VMDq support of different descriptor types or | |
| * buffer sizes through the use of multiple SRRCTL | |
| * registers, RDRXCTL.MVMEN must be set to 1 | |
| * | |
| * also, the manual doesn't mention it clearly but DCA hints | |
| * will only use queue 0's tags unless this bit is set. Side | |
| * effects of setting this bit are only that SRRCTL must be | |
| * fully programmed [0..15] | |
| */ | |
| rdrxctl |= IXGBE_RDRXCTL_MVMEN; | |
| break; | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| if (adapter->num_vfs) | |
| rdrxctl |= IXGBE_RDRXCTL_PSP; | |
| /* fall through */ | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| /* Disable RSC for ACK packets */ | |
| IXGBE_WRITE_REG(hw, IXGBE_RSCDBU, | |
| (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU))); | |
| rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE; | |
| /* hardware requires some bits to be set by default */ | |
| rdrxctl |= (IXGBE_RDRXCTL_RSCACKC | IXGBE_RDRXCTL_FCOE_WRFIX); | |
| rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP; | |
| break; | |
| default: | |
| /* We should do nothing since we don't know this hardware */ | |
| return; | |
| } | |
| IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); | |
| } | |
| /** | |
| * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset | |
| * @adapter: board private structure | |
| * | |
| * Configure the Rx unit of the MAC after a reset. | |
| **/ | |
| static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i; | |
| u32 rxctrl, rfctl; | |
| /* disable receives while setting up the descriptors */ | |
| hw->mac.ops.disable_rx(hw); | |
| ixgbe_setup_psrtype(adapter); | |
| ixgbe_setup_rdrxctl(adapter); | |
| /* RSC Setup */ | |
| rfctl = IXGBE_READ_REG(hw, IXGBE_RFCTL); | |
| rfctl &= ~IXGBE_RFCTL_RSC_DIS; | |
| if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) | |
| rfctl |= IXGBE_RFCTL_RSC_DIS; | |
| /* disable NFS filtering */ | |
| rfctl |= (IXGBE_RFCTL_NFSW_DIS | IXGBE_RFCTL_NFSR_DIS); | |
| IXGBE_WRITE_REG(hw, IXGBE_RFCTL, rfctl); | |
| /* Program registers for the distribution of queues */ | |
| ixgbe_setup_mrqc(adapter); | |
| /* set_rx_buffer_len must be called before ring initialization */ | |
| ixgbe_set_rx_buffer_len(adapter); | |
| /* | |
| * Setup the HW Rx Head and Tail Descriptor Pointers and | |
| * the Base and Length of the Rx Descriptor Ring | |
| */ | |
| for (i = 0; i < adapter->num_rx_queues; i++) | |
| ixgbe_configure_rx_ring(adapter, adapter->rx_ring[i]); | |
| rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); | |
| /* disable drop enable for 82598 parts */ | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| rxctrl |= IXGBE_RXCTRL_DMBYPS; | |
| /* enable all receives */ | |
| rxctrl |= IXGBE_RXCTRL_RXEN; | |
| hw->mac.ops.enable_rx_dma(hw, rxctrl); | |
| } | |
| static int ixgbe_vlan_rx_add_vid(struct net_device *netdev, | |
| __be16 proto, u16 vid) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| /* add VID to filter table */ | |
| if (!vid || !(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) | |
| hw->mac.ops.set_vfta(&adapter->hw, vid, VMDQ_P(0), true, !!vid); | |
| set_bit(vid, adapter->active_vlans); | |
| return 0; | |
| } | |
| static int ixgbe_find_vlvf_entry(struct ixgbe_hw *hw, u32 vlan) | |
| { | |
| u32 vlvf; | |
| int idx; | |
| /* short cut the special case */ | |
| if (vlan == 0) | |
| return 0; | |
| /* Search for the vlan id in the VLVF entries */ | |
| for (idx = IXGBE_VLVF_ENTRIES; --idx;) { | |
| vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(idx)); | |
| if ((vlvf & VLAN_VID_MASK) == vlan) | |
| break; | |
| } | |
| return idx; | |
| } | |
| void ixgbe_update_pf_promisc_vlvf(struct ixgbe_adapter *adapter, u32 vid) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 bits, word; | |
| int idx; | |
| idx = ixgbe_find_vlvf_entry(hw, vid); | |
| if (!idx) | |
| return; | |
| /* See if any other pools are set for this VLAN filter | |
| * entry other than the PF. | |
| */ | |
| word = idx * 2 + (VMDQ_P(0) / 32); | |
| bits = ~BIT(VMDQ_P(0) % 32); | |
| bits &= IXGBE_READ_REG(hw, IXGBE_VLVFB(word)); | |
| /* Disable the filter so this falls into the default pool. */ | |
| if (!bits && !IXGBE_READ_REG(hw, IXGBE_VLVFB(word ^ 1))) { | |
| if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) | |
| IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), 0); | |
| IXGBE_WRITE_REG(hw, IXGBE_VLVF(idx), 0); | |
| } | |
| } | |
| static int ixgbe_vlan_rx_kill_vid(struct net_device *netdev, | |
| __be16 proto, u16 vid) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| /* remove VID from filter table */ | |
| if (vid && !(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) | |
| hw->mac.ops.set_vfta(hw, vid, VMDQ_P(0), false, true); | |
| clear_bit(vid, adapter->active_vlans); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_vlan_strip_disable - helper to disable hw vlan stripping | |
| * @adapter: driver data | |
| */ | |
| static void ixgbe_vlan_strip_disable(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 vlnctrl; | |
| int i, j; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); | |
| vlnctrl &= ~IXGBE_VLNCTRL_VME; | |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| for (i = 0; i < adapter->num_rx_queues; i++) { | |
| struct ixgbe_ring *ring = adapter->rx_ring[i]; | |
| if (ring->l2_accel_priv) | |
| continue; | |
| j = ring->reg_idx; | |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); | |
| vlnctrl &= ~IXGBE_RXDCTL_VME; | |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl); | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /** | |
| * ixgbe_vlan_strip_enable - helper to enable hw vlan stripping | |
| * @adapter: driver data | |
| */ | |
| static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 vlnctrl; | |
| int i, j; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); | |
| vlnctrl |= IXGBE_VLNCTRL_VME; | |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| for (i = 0; i < adapter->num_rx_queues; i++) { | |
| struct ixgbe_ring *ring = adapter->rx_ring[i]; | |
| if (ring->l2_accel_priv) | |
| continue; | |
| j = ring->reg_idx; | |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); | |
| vlnctrl |= IXGBE_RXDCTL_VME; | |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl); | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 vlnctrl, i; | |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); | |
| if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) { | |
| /* For VMDq and SR-IOV we must leave VLAN filtering enabled */ | |
| vlnctrl |= IXGBE_VLNCTRL_VFE; | |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); | |
| } else { | |
| vlnctrl &= ~IXGBE_VLNCTRL_VFE; | |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); | |
| return; | |
| } | |
| /* Nothing to do for 82598 */ | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| return; | |
| /* We are already in VLAN promisc, nothing to do */ | |
| if (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC) | |
| return; | |
| /* Set flag so we don't redo unnecessary work */ | |
| adapter->flags2 |= IXGBE_FLAG2_VLAN_PROMISC; | |
| /* Add PF to all active pools */ | |
| for (i = IXGBE_VLVF_ENTRIES; --i;) { | |
| u32 reg_offset = IXGBE_VLVFB(i * 2 + VMDQ_P(0) / 32); | |
| u32 vlvfb = IXGBE_READ_REG(hw, reg_offset); | |
| vlvfb |= BIT(VMDQ_P(0) % 32); | |
| IXGBE_WRITE_REG(hw, reg_offset, vlvfb); | |
| } | |
| /* Set all bits in the VLAN filter table array */ | |
| for (i = hw->mac.vft_size; i--;) | |
| IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), ~0U); | |
| } | |
| #define VFTA_BLOCK_SIZE 8 | |
| static void ixgbe_scrub_vfta(struct ixgbe_adapter *adapter, u32 vfta_offset) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 vfta[VFTA_BLOCK_SIZE] = { 0 }; | |
| u32 vid_start = vfta_offset * 32; | |
| u32 vid_end = vid_start + (VFTA_BLOCK_SIZE * 32); | |
| u32 i, vid, word, bits; | |
| for (i = IXGBE_VLVF_ENTRIES; --i;) { | |
| u32 vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i)); | |
| /* pull VLAN ID from VLVF */ | |
| vid = vlvf & VLAN_VID_MASK; | |
| /* only concern outselves with a certain range */ | |
| if (vid < vid_start || vid >= vid_end) | |
| continue; | |
| if (vlvf) { | |
| /* record VLAN ID in VFTA */ | |
| vfta[(vid - vid_start) / 32] |= BIT(vid % 32); | |
| /* if PF is part of this then continue */ | |
| if (test_bit(vid, adapter->active_vlans)) | |
| continue; | |
| } | |
| /* remove PF from the pool */ | |
| word = i * 2 + VMDQ_P(0) / 32; | |
| bits = ~BIT(VMDQ_P(0) % 32); | |
| bits &= IXGBE_READ_REG(hw, IXGBE_VLVFB(word)); | |
| IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), bits); | |
| } | |
| /* extract values from active_vlans and write back to VFTA */ | |
| for (i = VFTA_BLOCK_SIZE; i--;) { | |
| vid = (vfta_offset + i) * 32; | |
| word = vid / BITS_PER_LONG; | |
| bits = vid % BITS_PER_LONG; | |
| vfta[i] |= adapter->active_vlans[word] >> bits; | |
| IXGBE_WRITE_REG(hw, IXGBE_VFTA(vfta_offset + i), vfta[i]); | |
| } | |
| } | |
| static void ixgbe_vlan_promisc_disable(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 vlnctrl, i; | |
| /* Set VLAN filtering to enabled */ | |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); | |
| vlnctrl |= IXGBE_VLNCTRL_VFE; | |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); | |
| if (!(adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) || | |
| hw->mac.type == ixgbe_mac_82598EB) | |
| return; | |
| /* We are not in VLAN promisc, nothing to do */ | |
| if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) | |
| return; | |
| /* Set flag so we don't redo unnecessary work */ | |
| adapter->flags2 &= ~IXGBE_FLAG2_VLAN_PROMISC; | |
| for (i = 0; i < hw->mac.vft_size; i += VFTA_BLOCK_SIZE) | |
| ixgbe_scrub_vfta(adapter, i); | |
| } | |
| static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) | |
| { | |
| u16 vid = 1; | |
| ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0); | |
| for_each_set_bit_from(vid, adapter->active_vlans, VLAN_N_VID) | |
| ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid); | |
| } | |
| /** | |
| * ixgbe_write_mc_addr_list - write multicast addresses to MTA | |
| * @netdev: network interface device structure | |
| * | |
| * Writes multicast address list to the MTA hash table. | |
| * Returns: -ENOMEM on failure | |
| * 0 on no addresses written | |
| * X on writing X addresses to MTA | |
| **/ | |
| static int ixgbe_write_mc_addr_list(struct net_device *netdev) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| if (!netif_running(netdev)) | |
| return 0; | |
| if (hw->mac.ops.update_mc_addr_list) | |
| hw->mac.ops.update_mc_addr_list(hw, netdev); | |
| else | |
| return -ENOMEM; | |
| #ifdef CONFIG_PCI_IOV | |
| ixgbe_restore_vf_multicasts(adapter); | |
| #endif | |
| return netdev_mc_count(netdev); | |
| } | |
| #ifdef CONFIG_PCI_IOV | |
| void ixgbe_full_sync_mac_table(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i; | |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { | |
| mac_table->state &= ~IXGBE_MAC_STATE_MODIFIED; | |
| if (mac_table->state & IXGBE_MAC_STATE_IN_USE) | |
| hw->mac.ops.set_rar(hw, i, | |
| mac_table->addr, | |
| mac_table->pool, | |
| IXGBE_RAH_AV); | |
| else | |
| hw->mac.ops.clear_rar(hw, i); | |
| } | |
| } | |
| #endif | |
| static void ixgbe_sync_mac_table(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i; | |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { | |
| if (!(mac_table->state & IXGBE_MAC_STATE_MODIFIED)) | |
| continue; | |
| mac_table->state &= ~IXGBE_MAC_STATE_MODIFIED; | |
| if (mac_table->state & IXGBE_MAC_STATE_IN_USE) | |
| hw->mac.ops.set_rar(hw, i, | |
| mac_table->addr, | |
| mac_table->pool, | |
| IXGBE_RAH_AV); | |
| else | |
| hw->mac.ops.clear_rar(hw, i); | |
| } | |
| } | |
| static void ixgbe_flush_sw_mac_table(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i; | |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { | |
| mac_table->state |= IXGBE_MAC_STATE_MODIFIED; | |
| mac_table->state &= ~IXGBE_MAC_STATE_IN_USE; | |
| } | |
| ixgbe_sync_mac_table(adapter); | |
| } | |
| static int ixgbe_available_rars(struct ixgbe_adapter *adapter, u16 pool) | |
| { | |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i, count = 0; | |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { | |
| /* do not count default RAR as available */ | |
| if (mac_table->state & IXGBE_MAC_STATE_DEFAULT) | |
| continue; | |
| /* only count unused and addresses that belong to us */ | |
| if (mac_table->state & IXGBE_MAC_STATE_IN_USE) { | |
| if (mac_table->pool != pool) | |
| continue; | |
| } | |
| count++; | |
| } | |
| return count; | |
| } | |
| /* this function destroys the first RAR entry */ | |
| static void ixgbe_mac_set_default_filter(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| memcpy(&mac_table->addr, hw->mac.addr, ETH_ALEN); | |
| mac_table->pool = VMDQ_P(0); | |
| mac_table->state = IXGBE_MAC_STATE_DEFAULT | IXGBE_MAC_STATE_IN_USE; | |
| hw->mac.ops.set_rar(hw, 0, mac_table->addr, mac_table->pool, | |
| IXGBE_RAH_AV); | |
| } | |
| int ixgbe_add_mac_filter(struct ixgbe_adapter *adapter, | |
| const u8 *addr, u16 pool) | |
| { | |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i; | |
| if (is_zero_ether_addr(addr)) | |
| return -EINVAL; | |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { | |
| if (mac_table->state & IXGBE_MAC_STATE_IN_USE) | |
| continue; | |
| ether_addr_copy(mac_table->addr, addr); | |
| mac_table->pool = pool; | |
| mac_table->state |= IXGBE_MAC_STATE_MODIFIED | | |
| IXGBE_MAC_STATE_IN_USE; | |
| ixgbe_sync_mac_table(adapter); | |
| return i; | |
| } | |
| return -ENOMEM; | |
| } | |
| int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter, | |
| const u8 *addr, u16 pool) | |
| { | |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i; | |
| if (is_zero_ether_addr(addr)) | |
| return -EINVAL; | |
| /* search table for addr, if found clear IN_USE flag and sync */ | |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { | |
| /* we can only delete an entry if it is in use */ | |
| if (!(mac_table->state & IXGBE_MAC_STATE_IN_USE)) | |
| continue; | |
| /* we only care about entries that belong to the given pool */ | |
| if (mac_table->pool != pool) | |
| continue; | |
| /* we only care about a specific MAC address */ | |
| if (!ether_addr_equal(addr, mac_table->addr)) | |
| continue; | |
| mac_table->state |= IXGBE_MAC_STATE_MODIFIED; | |
| mac_table->state &= ~IXGBE_MAC_STATE_IN_USE; | |
| ixgbe_sync_mac_table(adapter); | |
| return 0; | |
| } | |
| return -ENOMEM; | |
| } | |
| /** | |
| * ixgbe_write_uc_addr_list - write unicast addresses to RAR table | |
| * @netdev: network interface device structure | |
| * | |
| * Writes unicast address list to the RAR table. | |
| * Returns: -ENOMEM on failure/insufficient address space | |
| * 0 on no addresses written | |
| * X on writing X addresses to the RAR table | |
| **/ | |
| static int ixgbe_write_uc_addr_list(struct net_device *netdev, int vfn) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| int count = 0; | |
| /* return ENOMEM indicating insufficient memory for addresses */ | |
| if (netdev_uc_count(netdev) > ixgbe_available_rars(adapter, vfn)) | |
| return -ENOMEM; | |
| if (!netdev_uc_empty(netdev)) { | |
| struct netdev_hw_addr *ha; | |
| netdev_for_each_uc_addr(ha, netdev) { | |
| ixgbe_del_mac_filter(adapter, ha->addr, vfn); | |
| ixgbe_add_mac_filter(adapter, ha->addr, vfn); | |
| count++; | |
| } | |
| } | |
| return count; | |
| } | |
| static int ixgbe_uc_sync(struct net_device *netdev, const unsigned char *addr) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| int ret; | |
| ret = ixgbe_add_mac_filter(adapter, addr, VMDQ_P(0)); | |
| return min_t(int, ret, 0); | |
| } | |
| static int ixgbe_uc_unsync(struct net_device *netdev, const unsigned char *addr) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| ixgbe_del_mac_filter(adapter, addr, VMDQ_P(0)); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set | |
| * @netdev: network interface device structure | |
| * | |
| * The set_rx_method entry point is called whenever the unicast/multicast | |
| * address list or the network interface flags are updated. This routine is | |
| * responsible for configuring the hardware for proper unicast, multicast and | |
| * promiscuous mode. | |
| **/ | |
| void ixgbe_set_rx_mode(struct net_device *netdev) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE; | |
| netdev_features_t features = netdev->features; | |
| int count; | |
| /* Check for Promiscuous and All Multicast modes */ | |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); | |
| /* set all bits that we expect to always be set */ | |
| fctrl &= ~IXGBE_FCTRL_SBP; /* disable store-bad-packets */ | |
| fctrl |= IXGBE_FCTRL_BAM; | |
| fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */ | |
| fctrl |= IXGBE_FCTRL_PMCF; | |
| /* clear the bits we are changing the status of */ | |
| fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); | |
| if (netdev->flags & IFF_PROMISC) { | |
| hw->addr_ctrl.user_set_promisc = true; | |
| fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); | |
| vmolr |= IXGBE_VMOLR_MPE; | |
| features &= ~NETIF_F_HW_VLAN_CTAG_FILTER; | |
| } else { | |
| if (netdev->flags & IFF_ALLMULTI) { | |
| fctrl |= IXGBE_FCTRL_MPE; | |
| vmolr |= IXGBE_VMOLR_MPE; | |
| } | |
| hw->addr_ctrl.user_set_promisc = false; | |
| } | |
| /* | |
| * Write addresses to available RAR registers, if there is not | |
| * sufficient space to store all the addresses then enable | |
| * unicast promiscuous mode | |
| */ | |
| if (__dev_uc_sync(netdev, ixgbe_uc_sync, ixgbe_uc_unsync)) { | |
| fctrl |= IXGBE_FCTRL_UPE; | |
| vmolr |= IXGBE_VMOLR_ROPE; | |
| } | |
| /* Write addresses to the MTA, if the attempt fails | |
| * then we should just turn on promiscuous mode so | |
| * that we can at least receive multicast traffic | |
| */ | |
| count = ixgbe_write_mc_addr_list(netdev); | |
| if (count < 0) { | |
| fctrl |= IXGBE_FCTRL_MPE; | |
| vmolr |= IXGBE_VMOLR_MPE; | |
| } else if (count) { | |
| vmolr |= IXGBE_VMOLR_ROMPE; | |
| } | |
| if (hw->mac.type != ixgbe_mac_82598EB) { | |
| vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(VMDQ_P(0))) & | |
| ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE | | |
| IXGBE_VMOLR_ROPE); | |
| IXGBE_WRITE_REG(hw, IXGBE_VMOLR(VMDQ_P(0)), vmolr); | |
| } | |
| /* This is useful for sniffing bad packets. */ | |
| if (features & NETIF_F_RXALL) { | |
| /* UPE and MPE will be handled by normal PROMISC logic | |
| * in e1000e_set_rx_mode */ | |
| fctrl |= (IXGBE_FCTRL_SBP | /* Receive bad packets */ | |
| IXGBE_FCTRL_BAM | /* RX All Bcast Pkts */ | |
| IXGBE_FCTRL_PMCF); /* RX All MAC Ctrl Pkts */ | |
| fctrl &= ~(IXGBE_FCTRL_DPF); | |
| /* NOTE: VLAN filtering is disabled by setting PROMISC */ | |
| } | |
| IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); | |
| if (features & NETIF_F_HW_VLAN_CTAG_RX) | |
| ixgbe_vlan_strip_enable(adapter); | |
| else | |
| ixgbe_vlan_strip_disable(adapter); | |
| if (features & NETIF_F_HW_VLAN_CTAG_FILTER) | |
| ixgbe_vlan_promisc_disable(adapter); | |
| else | |
| ixgbe_vlan_promisc_enable(adapter); | |
| } | |
| static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter) | |
| { | |
| int q_idx; | |
| for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) | |
| napi_enable(&adapter->q_vector[q_idx]->napi); | |
| } | |
| static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) | |
| { | |
| int q_idx; | |
| for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) | |
| napi_disable(&adapter->q_vector[q_idx]->napi); | |
| } | |
| static void ixgbe_clear_udp_tunnel_port(struct ixgbe_adapter *adapter, u32 mask) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 vxlanctrl; | |
| if (!(adapter->flags & (IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE | | |
| IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE))) | |
| return; | |
| vxlanctrl = IXGBE_READ_REG(hw, IXGBE_VXLANCTRL) & ~mask; | |
| IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, vxlanctrl); | |
| if (mask & IXGBE_VXLANCTRL_VXLAN_UDPPORT_MASK) | |
| adapter->vxlan_port = 0; | |
| if (mask & IXGBE_VXLANCTRL_GENEVE_UDPPORT_MASK) | |
| adapter->geneve_port = 0; | |
| } | |
| #ifdef CONFIG_IXGBE_DCB | |
| /** | |
| * ixgbe_configure_dcb - Configure DCB hardware | |
| * @adapter: ixgbe adapter struct | |
| * | |
| * This is called by the driver on open to configure the DCB hardware. | |
| * This is also called by the gennetlink interface when reconfiguring | |
| * the DCB state. | |
| */ | |
| static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN; | |
| if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) { | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| netif_set_gso_max_size(adapter->netdev, 65536); | |
| return; | |
| } | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| netif_set_gso_max_size(adapter->netdev, 32768); | |
| #ifdef IXGBE_FCOE | |
| if (adapter->netdev->features & NETIF_F_FCOE_MTU) | |
| max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE); | |
| #endif | |
| /* reconfigure the hardware */ | |
| if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) { | |
| ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, | |
| DCB_TX_CONFIG); | |
| ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, | |
| DCB_RX_CONFIG); | |
| ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg); | |
| } else if (adapter->ixgbe_ieee_ets && adapter->ixgbe_ieee_pfc) { | |
| ixgbe_dcb_hw_ets(&adapter->hw, | |
| adapter->ixgbe_ieee_ets, | |
| max_frame); | |
| ixgbe_dcb_hw_pfc_config(&adapter->hw, | |
| adapter->ixgbe_ieee_pfc->pfc_en, | |
| adapter->ixgbe_ieee_ets->prio_tc); | |
| } | |
| /* Enable RSS Hash per TC */ | |
| if (hw->mac.type != ixgbe_mac_82598EB) { | |
| u32 msb = 0; | |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].indices - 1; | |
| while (rss_i) { | |
| msb++; | |
| rss_i >>= 1; | |
| } | |
| /* write msb to all 8 TCs in one write */ | |
| IXGBE_WRITE_REG(hw, IXGBE_RQTC, msb * 0x11111111); | |
| } | |
| } | |
| #endif | |
| /* Additional bittime to account for IXGBE framing */ | |
| #define IXGBE_ETH_FRAMING 20 | |
| /** | |
| * ixgbe_hpbthresh - calculate high water mark for flow control | |
| * | |
| * @adapter: board private structure to calculate for | |
| * @pb: packet buffer to calculate | |
| */ | |
| static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct net_device *dev = adapter->netdev; | |
| int link, tc, kb, marker; | |
| u32 dv_id, rx_pba; | |
| /* Calculate max LAN frame size */ | |
| tc = link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + IXGBE_ETH_FRAMING; | |
| #ifdef IXGBE_FCOE | |
| /* FCoE traffic class uses FCOE jumbo frames */ | |
| if ((dev->features & NETIF_F_FCOE_MTU) && | |
| (tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) && | |
| (pb == ixgbe_fcoe_get_tc(adapter))) | |
| tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; | |
| #endif | |
| /* Calculate delay value for device */ | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| dv_id = IXGBE_DV_X540(link, tc); | |
| break; | |
| default: | |
| dv_id = IXGBE_DV(link, tc); | |
| break; | |
| } | |
| /* Loopback switch introduces additional latency */ | |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) | |
| dv_id += IXGBE_B2BT(tc); | |
| /* Delay value is calculated in bit times convert to KB */ | |
| kb = IXGBE_BT2KB(dv_id); | |
| rx_pba = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(pb)) >> 10; | |
| marker = rx_pba - kb; | |
| /* It is possible that the packet buffer is not large enough | |
| * to provide required headroom. In this case throw an error | |
| * to user and a do the best we can. | |
| */ | |
| if (marker < 0) { | |
| e_warn(drv, "Packet Buffer(%i) can not provide enough" | |
| "headroom to support flow control." | |
| "Decrease MTU or number of traffic classes\n", pb); | |
| marker = tc + 1; | |
| } | |
| return marker; | |
| } | |
| /** | |
| * ixgbe_lpbthresh - calculate low water mark for for flow control | |
| * | |
| * @adapter: board private structure to calculate for | |
| * @pb: packet buffer to calculate | |
| */ | |
| static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter, int pb) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct net_device *dev = adapter->netdev; | |
| int tc; | |
| u32 dv_id; | |
| /* Calculate max LAN frame size */ | |
| tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN; | |
| #ifdef IXGBE_FCOE | |
| /* FCoE traffic class uses FCOE jumbo frames */ | |
| if ((dev->features & NETIF_F_FCOE_MTU) && | |
| (tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) && | |
| (pb == netdev_get_prio_tc_map(dev, adapter->fcoe.up))) | |
| tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; | |
| #endif | |
| /* Calculate delay value for device */ | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| dv_id = IXGBE_LOW_DV_X540(tc); | |
| break; | |
| default: | |
| dv_id = IXGBE_LOW_DV(tc); | |
| break; | |
| } | |
| /* Delay value is calculated in bit times convert to KB */ | |
| return IXGBE_BT2KB(dv_id); | |
| } | |
| /* | |
| * ixgbe_pbthresh_setup - calculate and setup high low water marks | |
| */ | |
| static void ixgbe_pbthresh_setup(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int num_tc = netdev_get_num_tc(adapter->netdev); | |
| int i; | |
| if (!num_tc) | |
| num_tc = 1; | |
| for (i = 0; i < num_tc; i++) { | |
| hw->fc.high_water[i] = ixgbe_hpbthresh(adapter, i); | |
| hw->fc.low_water[i] = ixgbe_lpbthresh(adapter, i); | |
| /* Low water marks must not be larger than high water marks */ | |
| if (hw->fc.low_water[i] > hw->fc.high_water[i]) | |
| hw->fc.low_water[i] = 0; | |
| } | |
| for (; i < MAX_TRAFFIC_CLASS; i++) | |
| hw->fc.high_water[i] = 0; | |
| } | |
| static void ixgbe_configure_pb(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int hdrm; | |
| u8 tc = netdev_get_num_tc(adapter->netdev); | |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || | |
| adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) | |
| hdrm = 32 << adapter->fdir_pballoc; | |
| else | |
| hdrm = 0; | |
| hw->mac.ops.set_rxpba(hw, tc, hdrm, PBA_STRATEGY_EQUAL); | |
| ixgbe_pbthresh_setup(adapter); | |
| } | |
| static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct hlist_node *node2; | |
| struct ixgbe_fdir_filter *filter; | |
| spin_lock(&adapter->fdir_perfect_lock); | |
| if (!hlist_empty(&adapter->fdir_filter_list)) | |
| ixgbe_fdir_set_input_mask_82599(hw, &adapter->fdir_mask); | |
| hlist_for_each_entry_safe(filter, node2, | |
| &adapter->fdir_filter_list, fdir_node) { | |
| ixgbe_fdir_write_perfect_filter_82599(hw, | |
| &filter->filter, | |
| filter->sw_idx, | |
| (filter->action == IXGBE_FDIR_DROP_QUEUE) ? | |
| IXGBE_FDIR_DROP_QUEUE : | |
| adapter->rx_ring[filter->action]->reg_idx); | |
| } | |
| spin_unlock(&adapter->fdir_perfect_lock); | |
| } | |
| static void ixgbe_macvlan_set_rx_mode(struct net_device *dev, unsigned int pool, | |
| struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 vmolr; | |
| /* No unicast promiscuous support for VMDQ devices. */ | |
| vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(pool)); | |
| vmolr |= (IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE); | |
| /* clear the affected bit */ | |
| vmolr &= ~IXGBE_VMOLR_MPE; | |
| if (dev->flags & IFF_ALLMULTI) { | |
| vmolr |= IXGBE_VMOLR_MPE; | |
| } else { | |
| vmolr |= IXGBE_VMOLR_ROMPE; | |
| hw->mac.ops.update_mc_addr_list(hw, dev); | |
| } | |
| ixgbe_write_uc_addr_list(adapter->netdev, pool); | |
| IXGBE_WRITE_REG(hw, IXGBE_VMOLR(pool), vmolr); | |
| } | |
| static void ixgbe_fwd_psrtype(struct ixgbe_fwd_adapter *vadapter) | |
| { | |
| struct ixgbe_adapter *adapter = vadapter->real_adapter; | |
| int rss_i = adapter->num_rx_queues_per_pool; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u16 pool = vadapter->pool; | |
| u32 psrtype = IXGBE_PSRTYPE_TCPHDR | | |
| IXGBE_PSRTYPE_UDPHDR | | |
| IXGBE_PSRTYPE_IPV4HDR | | |
| IXGBE_PSRTYPE_L2HDR | | |
| IXGBE_PSRTYPE_IPV6HDR; | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| return; | |
| if (rss_i > 3) | |
| psrtype |= 2u << 29; | |
| else if (rss_i > 1) | |
| psrtype |= 1u << 29; | |
| IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(VMDQ_P(pool)), psrtype); | |
| } | |
| /** | |
| * ixgbe_clean_rx_ring - Free Rx Buffers per Queue | |
| * @rx_ring: ring to free buffers from | |
| **/ | |
| static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring) | |
| { | |
| u16 i = rx_ring->next_to_clean; | |
| struct ixgbe_rx_buffer *rx_buffer = &rx_ring->rx_buffer_info[i]; | |
| /* Free all the Rx ring sk_buffs */ | |
| while (i != rx_ring->next_to_alloc) { | |
| if (rx_buffer->skb) { | |
| struct sk_buff *skb = rx_buffer->skb; | |
| if (IXGBE_CB(skb)->page_released) | |
| dma_unmap_page_attrs(rx_ring->dev, | |
| IXGBE_CB(skb)->dma, | |
| ixgbe_rx_pg_size(rx_ring), | |
| DMA_FROM_DEVICE, | |
| IXGBE_RX_DMA_ATTR); | |
| dev_kfree_skb(skb); | |
| } | |
| /* Invalidate cache lines that may have been written to by | |
| * device so that we avoid corrupting memory. | |
| */ | |
| dma_sync_single_range_for_cpu(rx_ring->dev, | |
| rx_buffer->dma, | |
| rx_buffer->page_offset, | |
| ixgbe_rx_bufsz(rx_ring), | |
| DMA_FROM_DEVICE); | |
| /* free resources associated with mapping */ | |
| dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma, | |
| ixgbe_rx_pg_size(rx_ring), | |
| DMA_FROM_DEVICE, | |
| IXGBE_RX_DMA_ATTR); | |
| __page_frag_cache_drain(rx_buffer->page, | |
| rx_buffer->pagecnt_bias); | |
| i++; | |
| rx_buffer++; | |
| if (i == rx_ring->count) { | |
| i = 0; | |
| rx_buffer = rx_ring->rx_buffer_info; | |
| } | |
| } | |
| rx_ring->next_to_alloc = 0; | |
| rx_ring->next_to_clean = 0; | |
| rx_ring->next_to_use = 0; | |
| } | |
| static void ixgbe_disable_fwd_ring(struct ixgbe_fwd_adapter *vadapter, | |
| struct ixgbe_ring *rx_ring) | |
| { | |
| struct ixgbe_adapter *adapter = vadapter->real_adapter; | |
| int index = rx_ring->queue_index + vadapter->rx_base_queue; | |
| /* shutdown specific queue receive and wait for dma to settle */ | |
| ixgbe_disable_rx_queue(adapter, rx_ring); | |
| usleep_range(10000, 20000); | |
| ixgbe_irq_disable_queues(adapter, BIT_ULL(index)); | |
| ixgbe_clean_rx_ring(rx_ring); | |
| rx_ring->l2_accel_priv = NULL; | |
| } | |
| static int ixgbe_fwd_ring_down(struct net_device *vdev, | |
| struct ixgbe_fwd_adapter *accel) | |
| { | |
| struct ixgbe_adapter *adapter = accel->real_adapter; | |
| unsigned int rxbase = accel->rx_base_queue; | |
| unsigned int txbase = accel->tx_base_queue; | |
| int i; | |
| netif_tx_stop_all_queues(vdev); | |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) { | |
| ixgbe_disable_fwd_ring(accel, adapter->rx_ring[rxbase + i]); | |
| adapter->rx_ring[rxbase + i]->netdev = adapter->netdev; | |
| } | |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) { | |
| adapter->tx_ring[txbase + i]->l2_accel_priv = NULL; | |
| adapter->tx_ring[txbase + i]->netdev = adapter->netdev; | |
| } | |
| return 0; | |
| } | |
| static int ixgbe_fwd_ring_up(struct net_device *vdev, | |
| struct ixgbe_fwd_adapter *accel) | |
| { | |
| struct ixgbe_adapter *adapter = accel->real_adapter; | |
| unsigned int rxbase, txbase, queues; | |
| int i, baseq, err = 0; | |
| if (!test_bit(accel->pool, &adapter->fwd_bitmask)) | |
| return 0; | |
| baseq = accel->pool * adapter->num_rx_queues_per_pool; | |
| netdev_dbg(vdev, "pool %i:%i queues %i:%i VSI bitmask %lx\n", | |
| accel->pool, adapter->num_rx_pools, | |
| baseq, baseq + adapter->num_rx_queues_per_pool, | |
| adapter->fwd_bitmask); | |
| accel->netdev = vdev; | |
| accel->rx_base_queue = rxbase = baseq; | |
| accel->tx_base_queue = txbase = baseq; | |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) | |
| ixgbe_disable_fwd_ring(accel, adapter->rx_ring[rxbase + i]); | |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) { | |
| adapter->rx_ring[rxbase + i]->netdev = vdev; | |
| adapter->rx_ring[rxbase + i]->l2_accel_priv = accel; | |
| ixgbe_configure_rx_ring(adapter, adapter->rx_ring[rxbase + i]); | |
| } | |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) { | |
| adapter->tx_ring[txbase + i]->netdev = vdev; | |
| adapter->tx_ring[txbase + i]->l2_accel_priv = accel; | |
| } | |
| queues = min_t(unsigned int, | |
| adapter->num_rx_queues_per_pool, vdev->num_tx_queues); | |
| err = netif_set_real_num_tx_queues(vdev, queues); | |
| if (err) | |
| goto fwd_queue_err; | |
| err = netif_set_real_num_rx_queues(vdev, queues); | |
| if (err) | |
| goto fwd_queue_err; | |
| if (is_valid_ether_addr(vdev->dev_addr)) | |
| ixgbe_add_mac_filter(adapter, vdev->dev_addr, accel->pool); | |
| ixgbe_fwd_psrtype(accel); | |
| ixgbe_macvlan_set_rx_mode(vdev, accel->pool, adapter); | |
| return err; | |
| fwd_queue_err: | |
| ixgbe_fwd_ring_down(vdev, accel); | |
| return err; | |
| } | |
| static int ixgbe_upper_dev_walk(struct net_device *upper, void *data) | |
| { | |
| if (netif_is_macvlan(upper)) { | |
| struct macvlan_dev *dfwd = netdev_priv(upper); | |
| struct ixgbe_fwd_adapter *vadapter = dfwd->fwd_priv; | |
| if (dfwd->fwd_priv) | |
| ixgbe_fwd_ring_up(upper, vadapter); | |
| } | |
| return 0; | |
| } | |
| static void ixgbe_configure_dfwd(struct ixgbe_adapter *adapter) | |
| { | |
| netdev_walk_all_upper_dev_rcu(adapter->netdev, | |
| ixgbe_upper_dev_walk, NULL); | |
| } | |
| static void ixgbe_configure(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| ixgbe_configure_pb(adapter); | |
| #ifdef CONFIG_IXGBE_DCB | |
| ixgbe_configure_dcb(adapter); | |
| #endif | |
| /* | |
| * We must restore virtualization before VLANs or else | |
| * the VLVF registers will not be populated | |
| */ | |
| ixgbe_configure_virtualization(adapter); | |
| ixgbe_set_rx_mode(adapter->netdev); | |
| ixgbe_restore_vlan(adapter); | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| hw->mac.ops.disable_rx_buff(hw); | |
| break; | |
| default: | |
| break; | |
| } | |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { | |
| ixgbe_init_fdir_signature_82599(&adapter->hw, | |
| adapter->fdir_pballoc); | |
| } else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { | |
| ixgbe_init_fdir_perfect_82599(&adapter->hw, | |
| adapter->fdir_pballoc); | |
| ixgbe_fdir_filter_restore(adapter); | |
| } | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| hw->mac.ops.enable_rx_buff(hw); | |
| break; | |
| default: | |
| break; | |
| } | |
| #ifdef CONFIG_IXGBE_DCA | |
| /* configure DCA */ | |
| if (adapter->flags & IXGBE_FLAG_DCA_CAPABLE) | |
| ixgbe_setup_dca(adapter); | |
| #endif /* CONFIG_IXGBE_DCA */ | |
| #ifdef IXGBE_FCOE | |
| /* configure FCoE L2 filters, redirection table, and Rx control */ | |
| ixgbe_configure_fcoe(adapter); | |
| #endif /* IXGBE_FCOE */ | |
| ixgbe_configure_tx(adapter); | |
| ixgbe_configure_rx(adapter); | |
| ixgbe_configure_dfwd(adapter); | |
| } | |
| /** | |
| * ixgbe_sfp_link_config - set up SFP+ link | |
| * @adapter: pointer to private adapter struct | |
| **/ | |
| static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) | |
| { | |
| /* | |
| * We are assuming the worst case scenario here, and that | |
| * is that an SFP was inserted/removed after the reset | |
| * but before SFP detection was enabled. As such the best | |
| * solution is to just start searching as soon as we start | |
| */ | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) | |
| adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; | |
| adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; | |
| adapter->sfp_poll_time = 0; | |
| } | |
| /** | |
| * ixgbe_non_sfp_link_config - set up non-SFP+ link | |
| * @hw: pointer to private hardware struct | |
| * | |
| * Returns 0 on success, negative on failure | |
| **/ | |
| static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) | |
| { | |
| u32 speed; | |
| bool autoneg, link_up = false; | |
| int ret = IXGBE_ERR_LINK_SETUP; | |
| if (hw->mac.ops.check_link) | |
| ret = hw->mac.ops.check_link(hw, &speed, &link_up, false); | |
| if (ret) | |
| return ret; | |
| speed = hw->phy.autoneg_advertised; | |
| if ((!speed) && (hw->mac.ops.get_link_capabilities)) | |
| ret = hw->mac.ops.get_link_capabilities(hw, &speed, | |
| &autoneg); | |
| if (ret) | |
| return ret; | |
| if (hw->mac.ops.setup_link) | |
| ret = hw->mac.ops.setup_link(hw, speed, link_up); | |
| return ret; | |
| } | |
| static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 gpie = 0; | |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { | |
| gpie = IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT | | |
| IXGBE_GPIE_OCD; | |
| gpie |= IXGBE_GPIE_EIAME; | |
| /* | |
| * use EIAM to auto-mask when MSI-X interrupt is asserted | |
| * this saves a register write for every interrupt | |
| */ | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| default: | |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF); | |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF); | |
| break; | |
| } | |
| } else { | |
| /* legacy interrupts, use EIAM to auto-mask when reading EICR, | |
| * specifically only auto mask tx and rx interrupts */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); | |
| } | |
| /* XXX: to interrupt immediately for EICS writes, enable this */ | |
| /* gpie |= IXGBE_GPIE_EIMEN; */ | |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { | |
| gpie &= ~IXGBE_GPIE_VTMODE_MASK; | |
| switch (adapter->ring_feature[RING_F_VMDQ].mask) { | |
| case IXGBE_82599_VMDQ_8Q_MASK: | |
| gpie |= IXGBE_GPIE_VTMODE_16; | |
| break; | |
| case IXGBE_82599_VMDQ_4Q_MASK: | |
| gpie |= IXGBE_GPIE_VTMODE_32; | |
| break; | |
| default: | |
| gpie |= IXGBE_GPIE_VTMODE_64; | |
| break; | |
| } | |
| } | |
| /* Enable Thermal over heat sensor interrupt */ | |
| if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) { | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82599EB: | |
| gpie |= IXGBE_SDP0_GPIEN_8259X; | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /* Enable fan failure interrupt */ | |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) | |
| gpie |= IXGBE_SDP1_GPIEN(hw); | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82599EB: | |
| gpie |= IXGBE_SDP1_GPIEN_8259X | IXGBE_SDP2_GPIEN_8259X; | |
| break; | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| gpie |= IXGBE_SDP0_GPIEN_X540; | |
| break; | |
| default: | |
| break; | |
| } | |
| IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); | |
| } | |
| static void ixgbe_up_complete(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int err; | |
| u32 ctrl_ext; | |
| ixgbe_get_hw_control(adapter); | |
| ixgbe_setup_gpie(adapter); | |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) | |
| ixgbe_configure_msix(adapter); | |
| else | |
| ixgbe_configure_msi_and_legacy(adapter); | |
| /* enable the optics for 82599 SFP+ fiber */ | |
| if (hw->mac.ops.enable_tx_laser) | |
| hw->mac.ops.enable_tx_laser(hw); | |
| if (hw->phy.ops.set_phy_power) | |
| hw->phy.ops.set_phy_power(hw, true); | |
| smp_mb__before_atomic(); | |
| clear_bit(__IXGBE_DOWN, &adapter->state); | |
| ixgbe_napi_enable_all(adapter); | |
| if (ixgbe_is_sfp(hw)) { | |
| ixgbe_sfp_link_config(adapter); | |
| } else { | |
| err = ixgbe_non_sfp_link_config(hw); | |
| if (err) | |
| e_err(probe, "link_config FAILED %d\n", err); | |
| } | |
| /* clear any pending interrupts, may auto mask */ | |
| IXGBE_READ_REG(hw, IXGBE_EICR); | |
| ixgbe_irq_enable(adapter, true, true); | |
| /* | |
| * If this adapter has a fan, check to see if we had a failure | |
| * before we enabled the interrupt. | |
| */ | |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { | |
| u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); | |
| if (esdp & IXGBE_ESDP_SDP1) | |
| e_crit(drv, "Fan has stopped, replace the adapter\n"); | |
| } | |
| /* bring the link up in the watchdog, this could race with our first | |
| * link up interrupt but shouldn't be a problem */ | |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; | |
| adapter->link_check_timeout = jiffies; | |
| mod_timer(&adapter->service_timer, jiffies); | |
| /* Set PF Reset Done bit so PF/VF Mail Ops can work */ | |
| ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); | |
| ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; | |
| IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); | |
| } | |
| void ixgbe_reinit_locked(struct ixgbe_adapter *adapter) | |
| { | |
| WARN_ON(in_interrupt()); | |
| /* put off any impending NetWatchDogTimeout */ | |
| netif_trans_update(adapter->netdev); | |
| while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) | |
| usleep_range(1000, 2000); | |
| if (adapter->hw.phy.type == ixgbe_phy_fw) | |
| ixgbe_watchdog_link_is_down(adapter); | |
| ixgbe_down(adapter); | |
| /* | |
| * If SR-IOV enabled then wait a bit before bringing the adapter | |
| * back up to give the VFs time to respond to the reset. The | |
| * two second wait is based upon the watchdog timer cycle in | |
| * the VF driver. | |
| */ | |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) | |
| msleep(2000); | |
| ixgbe_up(adapter); | |
| clear_bit(__IXGBE_RESETTING, &adapter->state); | |
| } | |
| void ixgbe_up(struct ixgbe_adapter *adapter) | |
| { | |
| /* hardware has been reset, we need to reload some things */ | |
| ixgbe_configure(adapter); | |
| ixgbe_up_complete(adapter); | |
| } | |
| void ixgbe_reset(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct net_device *netdev = adapter->netdev; | |
| int err; | |
| if (ixgbe_removed(hw->hw_addr)) | |
| return; | |
| /* lock SFP init bit to prevent race conditions with the watchdog */ | |
| while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) | |
| usleep_range(1000, 2000); | |
| /* clear all SFP and link config related flags while holding SFP_INIT */ | |
| adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP | | |
| IXGBE_FLAG2_SFP_NEEDS_RESET); | |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; | |
| err = hw->mac.ops.init_hw(hw); | |
| switch (err) { | |
| case 0: | |
| case IXGBE_ERR_SFP_NOT_PRESENT: | |
| case IXGBE_ERR_SFP_NOT_SUPPORTED: | |
| break; | |
| case IXGBE_ERR_MASTER_REQUESTS_PENDING: | |
| e_dev_err("master disable timed out\n"); | |
| break; | |
| case IXGBE_ERR_EEPROM_VERSION: | |
| /* We are running on a pre-production device, log a warning */ | |
| e_dev_warn("This device is a pre-production adapter/LOM. " | |
| "Please be aware there may be issues associated with " | |
| "your hardware. If you are experiencing problems " | |
| "please contact your Intel or hardware " | |
| "representative who provided you with this " | |
| "hardware.\n"); | |
| break; | |
| default: | |
| e_dev_err("Hardware Error: %d\n", err); | |
| } | |
| clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); | |
| /* flush entries out of MAC table */ | |
| ixgbe_flush_sw_mac_table(adapter); | |
| __dev_uc_unsync(netdev, NULL); | |
| /* do not flush user set addresses */ | |
| ixgbe_mac_set_default_filter(adapter); | |
| /* update SAN MAC vmdq pool selection */ | |
| if (hw->mac.san_mac_rar_index) | |
| hw->mac.ops.set_vmdq_san_mac(hw, VMDQ_P(0)); | |
| if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) | |
| ixgbe_ptp_reset(adapter); | |
| if (hw->phy.ops.set_phy_power) { | |
| if (!netif_running(adapter->netdev) && !adapter->wol) | |
| hw->phy.ops.set_phy_power(hw, false); | |
| else | |
| hw->phy.ops.set_phy_power(hw, true); | |
| } | |
| } | |
| /** | |
| * ixgbe_clean_tx_ring - Free Tx Buffers | |
| * @tx_ring: ring to be cleaned | |
| **/ | |
| static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring) | |
| { | |
| u16 i = tx_ring->next_to_clean; | |
| struct ixgbe_tx_buffer *tx_buffer = &tx_ring->tx_buffer_info[i]; | |
| while (i != tx_ring->next_to_use) { | |
| union ixgbe_adv_tx_desc *eop_desc, *tx_desc; | |
| /* Free all the Tx ring sk_buffs */ | |
| if (ring_is_xdp(tx_ring)) | |
| page_frag_free(tx_buffer->data); | |
| else | |
| dev_kfree_skb_any(tx_buffer->skb); | |
| /* unmap skb header data */ | |
| dma_unmap_single(tx_ring->dev, | |
| dma_unmap_addr(tx_buffer, dma), | |
| dma_unmap_len(tx_buffer, len), | |
| DMA_TO_DEVICE); | |
| /* check for eop_desc to determine the end of the packet */ | |
| eop_desc = tx_buffer->next_to_watch; | |
| tx_desc = IXGBE_TX_DESC(tx_ring, i); | |
| /* unmap remaining buffers */ | |
| while (tx_desc != eop_desc) { | |
| tx_buffer++; | |
| tx_desc++; | |
| i++; | |
| if (unlikely(i == tx_ring->count)) { | |
| i = 0; | |
| tx_buffer = tx_ring->tx_buffer_info; | |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); | |
| } | |
| /* unmap any remaining paged data */ | |
| if (dma_unmap_len(tx_buffer, len)) | |
| dma_unmap_page(tx_ring->dev, | |
| dma_unmap_addr(tx_buffer, dma), | |
| dma_unmap_len(tx_buffer, len), | |
| DMA_TO_DEVICE); | |
| } | |
| /* move us one more past the eop_desc for start of next pkt */ | |
| tx_buffer++; | |
| i++; | |
| if (unlikely(i == tx_ring->count)) { | |
| i = 0; | |
| tx_buffer = tx_ring->tx_buffer_info; | |
| } | |
| } | |
| /* reset BQL for queue */ | |
| if (!ring_is_xdp(tx_ring)) | |
| netdev_tx_reset_queue(txring_txq(tx_ring)); | |
| /* reset next_to_use and next_to_clean */ | |
| tx_ring->next_to_use = 0; | |
| tx_ring->next_to_clean = 0; | |
| } | |
| /** | |
| * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues | |
| * @adapter: board private structure | |
| **/ | |
| static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter) | |
| { | |
| int i; | |
| for (i = 0; i < adapter->num_rx_queues; i++) | |
| ixgbe_clean_rx_ring(adapter->rx_ring[i]); | |
| } | |
| /** | |
| * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues | |
| * @adapter: board private structure | |
| **/ | |
| static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter) | |
| { | |
| int i; | |
| for (i = 0; i < adapter->num_tx_queues; i++) | |
| ixgbe_clean_tx_ring(adapter->tx_ring[i]); | |
| for (i = 0; i < adapter->num_xdp_queues; i++) | |
| ixgbe_clean_tx_ring(adapter->xdp_ring[i]); | |
| } | |
| static void ixgbe_fdir_filter_exit(struct ixgbe_adapter *adapter) | |
| { | |
| struct hlist_node *node2; | |
| struct ixgbe_fdir_filter *filter; | |
| spin_lock(&adapter->fdir_perfect_lock); | |
| hlist_for_each_entry_safe(filter, node2, | |
| &adapter->fdir_filter_list, fdir_node) { | |
| hlist_del(&filter->fdir_node); | |
| kfree(filter); | |
| } | |
| adapter->fdir_filter_count = 0; | |
| spin_unlock(&adapter->fdir_perfect_lock); | |
| } | |
| static int ixgbe_disable_macvlan(struct net_device *upper, void *data) | |
| { | |
| if (netif_is_macvlan(upper)) { | |
| struct macvlan_dev *vlan = netdev_priv(upper); | |
| if (vlan->fwd_priv) { | |
| netif_tx_stop_all_queues(upper); | |
| netif_carrier_off(upper); | |
| netif_tx_disable(upper); | |
| } | |
| } | |
| return 0; | |
| } | |
| void ixgbe_down(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i; | |
| /* signal that we are down to the interrupt handler */ | |
| if (test_and_set_bit(__IXGBE_DOWN, &adapter->state)) | |
| return; /* do nothing if already down */ | |
| /* disable receives */ | |
| hw->mac.ops.disable_rx(hw); | |
| /* disable all enabled rx queues */ | |
| for (i = 0; i < adapter->num_rx_queues; i++) | |
| /* this call also flushes the previous write */ | |
| ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]); | |
| usleep_range(10000, 20000); | |
| /* synchronize_sched() needed for pending XDP buffers to drain */ | |
| if (adapter->xdp_ring[0]) | |
| synchronize_sched(); | |
| netif_tx_stop_all_queues(netdev); | |
| /* call carrier off first to avoid false dev_watchdog timeouts */ | |
| netif_carrier_off(netdev); | |
| netif_tx_disable(netdev); | |
| /* disable any upper devices */ | |
| netdev_walk_all_upper_dev_rcu(adapter->netdev, | |
| ixgbe_disable_macvlan, NULL); | |
| ixgbe_irq_disable(adapter); | |
| ixgbe_napi_disable_all(adapter); | |
| clear_bit(__IXGBE_RESET_REQUESTED, &adapter->state); | |
| adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT; | |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; | |
| del_timer_sync(&adapter->service_timer); | |
| if (adapter->num_vfs) { | |
| /* Clear EITR Select mapping */ | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0); | |
| /* Mark all the VFs as inactive */ | |
| for (i = 0 ; i < adapter->num_vfs; i++) | |
| adapter->vfinfo[i].clear_to_send = false; | |
| /* ping all the active vfs to let them know we are going down */ | |
| ixgbe_ping_all_vfs(adapter); | |
| /* Disable all VFTE/VFRE TX/RX */ | |
| ixgbe_disable_tx_rx(adapter); | |
| } | |
| /* disable transmits in the hardware now that interrupts are off */ | |
| for (i = 0; i < adapter->num_tx_queues; i++) { | |
| u8 reg_idx = adapter->tx_ring[i]->reg_idx; | |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH); | |
| } | |
| for (i = 0; i < adapter->num_xdp_queues; i++) { | |
| u8 reg_idx = adapter->xdp_ring[i]->reg_idx; | |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH); | |
| } | |
| /* Disable the Tx DMA engine on 82599 and later MAC */ | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, | |
| (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) & | |
| ~IXGBE_DMATXCTL_TE)); | |
| break; | |
| default: | |
| break; | |
| } | |
| if (!pci_channel_offline(adapter->pdev)) | |
| ixgbe_reset(adapter); | |
| /* power down the optics for 82599 SFP+ fiber */ | |
| if (hw->mac.ops.disable_tx_laser) | |
| hw->mac.ops.disable_tx_laser(hw); | |
| ixgbe_clean_all_tx_rings(adapter); | |
| ixgbe_clean_all_rx_rings(adapter); | |
| } | |
| /** | |
| * ixgbe_eee_capable - helper function to determine EEE support on X550 | |
| * @adapter: board private structure | |
| */ | |
| static void ixgbe_set_eee_capable(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| switch (hw->device_id) { | |
| case IXGBE_DEV_ID_X550EM_A_1G_T: | |
| case IXGBE_DEV_ID_X550EM_A_1G_T_L: | |
| if (!hw->phy.eee_speeds_supported) | |
| break; | |
| adapter->flags2 |= IXGBE_FLAG2_EEE_CAPABLE; | |
| if (!hw->phy.eee_speeds_advertised) | |
| break; | |
| adapter->flags2 |= IXGBE_FLAG2_EEE_ENABLED; | |
| break; | |
| default: | |
| adapter->flags2 &= ~IXGBE_FLAG2_EEE_CAPABLE; | |
| adapter->flags2 &= ~IXGBE_FLAG2_EEE_ENABLED; | |
| break; | |
| } | |
| } | |
| /** | |
| * ixgbe_tx_timeout - Respond to a Tx Hang | |
| * @netdev: network interface device structure | |
| **/ | |
| static void ixgbe_tx_timeout(struct net_device *netdev) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| /* Do the reset outside of interrupt context */ | |
| ixgbe_tx_timeout_reset(adapter); | |
| } | |
| #ifdef CONFIG_IXGBE_DCB | |
| static void ixgbe_init_dcb(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct tc_configuration *tc; | |
| int j; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| case ixgbe_mac_82599EB: | |
| adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS; | |
| adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS; | |
| break; | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| adapter->dcb_cfg.num_tcs.pg_tcs = X540_TRAFFIC_CLASS; | |
| adapter->dcb_cfg.num_tcs.pfc_tcs = X540_TRAFFIC_CLASS; | |
| break; | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| default: | |
| adapter->dcb_cfg.num_tcs.pg_tcs = DEF_TRAFFIC_CLASS; | |
| adapter->dcb_cfg.num_tcs.pfc_tcs = DEF_TRAFFIC_CLASS; | |
| break; | |
| } | |
| /* Configure DCB traffic classes */ | |
| for (j = 0; j < MAX_TRAFFIC_CLASS; j++) { | |
| tc = &adapter->dcb_cfg.tc_config[j]; | |
| tc->path[DCB_TX_CONFIG].bwg_id = 0; | |
| tc->path[DCB_TX_CONFIG].bwg_percent = 12 + (j & 1); | |
| tc->path[DCB_RX_CONFIG].bwg_id = 0; | |
| tc->path[DCB_RX_CONFIG].bwg_percent = 12 + (j & 1); | |
| tc->dcb_pfc = pfc_disabled; | |
| } | |
| /* Initialize default user to priority mapping, UPx->TC0 */ | |
| tc = &adapter->dcb_cfg.tc_config[0]; | |
| tc->path[DCB_TX_CONFIG].up_to_tc_bitmap = 0xFF; | |
| tc->path[DCB_RX_CONFIG].up_to_tc_bitmap = 0xFF; | |
| adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100; | |
| adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100; | |
| adapter->dcb_cfg.pfc_mode_enable = false; | |
| adapter->dcb_set_bitmap = 0x00; | |
| if (adapter->flags & IXGBE_FLAG_DCB_CAPABLE) | |
| adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE; | |
| memcpy(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, | |
| sizeof(adapter->temp_dcb_cfg)); | |
| } | |
| #endif | |
| /** | |
| * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) | |
| * @adapter: board private structure to initialize | |
| * | |
| * ixgbe_sw_init initializes the Adapter private data structure. | |
| * Fields are initialized based on PCI device information and | |
| * OS network device settings (MTU size). | |
| **/ | |
| static int ixgbe_sw_init(struct ixgbe_adapter *adapter, | |
| const struct ixgbe_info *ii) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct pci_dev *pdev = adapter->pdev; | |
| unsigned int rss, fdir; | |
| u32 fwsm; | |
| int i; | |
| /* PCI config space info */ | |
| hw->vendor_id = pdev->vendor; | |
| hw->device_id = pdev->device; | |
| hw->revision_id = pdev->revision; | |
| hw->subsystem_vendor_id = pdev->subsystem_vendor; | |
| hw->subsystem_device_id = pdev->subsystem_device; | |
| /* get_invariants needs the device IDs */ | |
| ii->get_invariants(hw); | |
| /* Set common capability flags and settings */ | |
| rss = min_t(int, ixgbe_max_rss_indices(adapter), num_online_cpus()); | |
| adapter->ring_feature[RING_F_RSS].limit = rss; | |
| adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; | |
| adapter->max_q_vectors = MAX_Q_VECTORS_82599; | |
| adapter->atr_sample_rate = 20; | |
| fdir = min_t(int, IXGBE_MAX_FDIR_INDICES, num_online_cpus()); | |
| adapter->ring_feature[RING_F_FDIR].limit = fdir; | |
| adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K; | |
| #ifdef CONFIG_IXGBE_DCA | |
| adapter->flags |= IXGBE_FLAG_DCA_CAPABLE; | |
| #endif | |
| #ifdef CONFIG_IXGBE_DCB | |
| adapter->flags |= IXGBE_FLAG_DCB_CAPABLE; | |
| adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; | |
| #endif | |
| #ifdef IXGBE_FCOE | |
| adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; | |
| adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; | |
| #ifdef CONFIG_IXGBE_DCB | |
| /* Default traffic class to use for FCoE */ | |
| adapter->fcoe.up = IXGBE_FCOE_DEFTC; | |
| #endif /* CONFIG_IXGBE_DCB */ | |
| #endif /* IXGBE_FCOE */ | |
| /* initialize static ixgbe jump table entries */ | |
| adapter->jump_tables[0] = kzalloc(sizeof(*adapter->jump_tables[0]), | |
| GFP_KERNEL); | |
| if (!adapter->jump_tables[0]) | |
| return -ENOMEM; | |
| adapter->jump_tables[0]->mat = ixgbe_ipv4_fields; | |
| for (i = 1; i < IXGBE_MAX_LINK_HANDLE; i++) | |
| adapter->jump_tables[i] = NULL; | |
| adapter->mac_table = kzalloc(sizeof(struct ixgbe_mac_addr) * | |
| hw->mac.num_rar_entries, | |
| GFP_ATOMIC); | |
| if (!adapter->mac_table) | |
| return -ENOMEM; | |
| if (ixgbe_init_rss_key(adapter)) | |
| return -ENOMEM; | |
| /* Set MAC specific capability flags and exceptions */ | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| adapter->flags2 &= ~IXGBE_FLAG2_RSC_CAPABLE; | |
| if (hw->device_id == IXGBE_DEV_ID_82598AT) | |
| adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; | |
| adapter->max_q_vectors = MAX_Q_VECTORS_82598; | |
| adapter->ring_feature[RING_F_FDIR].limit = 0; | |
| adapter->atr_sample_rate = 0; | |
| adapter->fdir_pballoc = 0; | |
| #ifdef IXGBE_FCOE | |
| adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; | |
| adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; | |
| #ifdef CONFIG_IXGBE_DCB | |
| adapter->fcoe.up = 0; | |
| #endif /* IXGBE_DCB */ | |
| #endif /* IXGBE_FCOE */ | |
| break; | |
| case ixgbe_mac_82599EB: | |
| if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) | |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; | |
| break; | |
| case ixgbe_mac_X540: | |
| fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw)); | |
| if (fwsm & IXGBE_FWSM_TS_ENABLED) | |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; | |
| break; | |
| case ixgbe_mac_x550em_a: | |
| adapter->flags |= IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE; | |
| switch (hw->device_id) { | |
| case IXGBE_DEV_ID_X550EM_A_1G_T: | |
| case IXGBE_DEV_ID_X550EM_A_1G_T_L: | |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; | |
| break; | |
| default: | |
| break; | |
| } | |
| /* fall through */ | |
| case ixgbe_mac_X550EM_x: | |
| #ifdef CONFIG_IXGBE_DCB | |
| adapter->flags &= ~IXGBE_FLAG_DCB_CAPABLE; | |
| #endif | |
| #ifdef IXGBE_FCOE | |
| adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; | |
| #ifdef CONFIG_IXGBE_DCB | |
| adapter->fcoe.up = 0; | |
| #endif /* IXGBE_DCB */ | |
| #endif /* IXGBE_FCOE */ | |
| /* Fall Through */ | |
| case ixgbe_mac_X550: | |
| if (hw->mac.type == ixgbe_mac_X550) | |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; | |
| #ifdef CONFIG_IXGBE_DCA | |
| adapter->flags &= ~IXGBE_FLAG_DCA_CAPABLE; | |
| #endif | |
| adapter->flags |= IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE; | |
| break; | |
| default: | |
| break; | |
| } | |
| #ifdef IXGBE_FCOE | |
| /* FCoE support exists, always init the FCoE lock */ | |
| spin_lock_init(&adapter->fcoe.lock); | |
| #endif | |
| /* n-tuple support exists, always init our spinlock */ | |
| spin_lock_init(&adapter->fdir_perfect_lock); | |
| #ifdef CONFIG_IXGBE_DCB | |
| ixgbe_init_dcb(adapter); | |
| #endif | |
| /* default flow control settings */ | |
| hw->fc.requested_mode = ixgbe_fc_full; | |
| hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */ | |
| ixgbe_pbthresh_setup(adapter); | |
| hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; | |
| hw->fc.send_xon = true; | |
| hw->fc.disable_fc_autoneg = ixgbe_device_supports_autoneg_fc(hw); | |
| #ifdef CONFIG_PCI_IOV | |
| if (max_vfs > 0) | |
| e_dev_warn("Enabling SR-IOV VFs using the max_vfs module parameter is deprecated - please use the pci sysfs interface instead.\n"); | |
| /* assign number of SR-IOV VFs */ | |
| if (hw->mac.type != ixgbe_mac_82598EB) { | |
| if (max_vfs > IXGBE_MAX_VFS_DRV_LIMIT) { | |
| max_vfs = 0; | |
| e_dev_warn("max_vfs parameter out of range. Not assigning any SR-IOV VFs\n"); | |
| } | |
| } | |
| #endif /* CONFIG_PCI_IOV */ | |
| /* enable itr by default in dynamic mode */ | |
| adapter->rx_itr_setting = 1; | |
| adapter->tx_itr_setting = 1; | |
| /* set default ring sizes */ | |
| adapter->tx_ring_count = IXGBE_DEFAULT_TXD; | |
| adapter->rx_ring_count = IXGBE_DEFAULT_RXD; | |
| /* set default work limits */ | |
| adapter->tx_work_limit = IXGBE_DEFAULT_TX_WORK; | |
| /* initialize eeprom parameters */ | |
| if (ixgbe_init_eeprom_params_generic(hw)) { | |
| e_dev_err("EEPROM initialization failed\n"); | |
| return -EIO; | |
| } | |
| /* PF holds first pool slot */ | |
| set_bit(0, &adapter->fwd_bitmask); | |
| set_bit(__IXGBE_DOWN, &adapter->state); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors) | |
| * @tx_ring: tx descriptor ring (for a specific queue) to setup | |
| * | |
| * Return 0 on success, negative on failure | |
| **/ | |
| int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring) | |
| { | |
| struct device *dev = tx_ring->dev; | |
| int orig_node = dev_to_node(dev); | |
| int ring_node = -1; | |
| int size; | |
| size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; | |
| if (tx_ring->q_vector) | |
| ring_node = tx_ring->q_vector->numa_node; | |
| tx_ring->tx_buffer_info = vmalloc_node(size, ring_node); | |
| if (!tx_ring->tx_buffer_info) | |
| tx_ring->tx_buffer_info = vmalloc(size); | |
| if (!tx_ring->tx_buffer_info) | |
| goto err; | |
| /* round up to nearest 4K */ | |
| tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc); | |
| tx_ring->size = ALIGN(tx_ring->size, 4096); | |
| set_dev_node(dev, ring_node); | |
| tx_ring->desc = dma_alloc_coherent(dev, | |
| tx_ring->size, | |
| &tx_ring->dma, | |
| GFP_KERNEL); | |
| set_dev_node(dev, orig_node); | |
| if (!tx_ring->desc) | |
| tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, | |
| &tx_ring->dma, GFP_KERNEL); | |
| if (!tx_ring->desc) | |
| goto err; | |
| tx_ring->next_to_use = 0; | |
| tx_ring->next_to_clean = 0; | |
| return 0; | |
| err: | |
| vfree(tx_ring->tx_buffer_info); | |
| tx_ring->tx_buffer_info = NULL; | |
| dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n"); | |
| return -ENOMEM; | |
| } | |
| /** | |
| * ixgbe_setup_all_tx_resources - allocate all queues Tx resources | |
| * @adapter: board private structure | |
| * | |
| * If this function returns with an error, then it's possible one or | |
| * more of the rings is populated (while the rest are not). It is the | |
| * callers duty to clean those orphaned rings. | |
| * | |
| * Return 0 on success, negative on failure | |
| **/ | |
| static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) | |
| { | |
| int i, j = 0, err = 0; | |
| for (i = 0; i < adapter->num_tx_queues; i++) { | |
| err = ixgbe_setup_tx_resources(adapter->tx_ring[i]); | |
| if (!err) | |
| continue; | |
| e_err(probe, "Allocation for Tx Queue %u failed\n", i); | |
| goto err_setup_tx; | |
| } | |
| for (j = 0; j < adapter->num_xdp_queues; j++) { | |
| err = ixgbe_setup_tx_resources(adapter->xdp_ring[j]); | |
| if (!err) | |
| continue; | |
| e_err(probe, "Allocation for Tx Queue %u failed\n", j); | |
| goto err_setup_tx; | |
| } | |
| return 0; | |
| err_setup_tx: | |
| /* rewind the index freeing the rings as we go */ | |
| while (j--) | |
| ixgbe_free_tx_resources(adapter->xdp_ring[j]); | |
| while (i--) | |
| ixgbe_free_tx_resources(adapter->tx_ring[i]); | |
| return err; | |
| } | |
| /** | |
| * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) | |
| * @rx_ring: rx descriptor ring (for a specific queue) to setup | |
| * | |
| * Returns 0 on success, negative on failure | |
| **/ | |
| int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *rx_ring) | |
| { | |
| struct device *dev = rx_ring->dev; | |
| int orig_node = dev_to_node(dev); | |
| int ring_node = -1; | |
| int size; | |
| size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; | |
| if (rx_ring->q_vector) | |
| ring_node = rx_ring->q_vector->numa_node; | |
| rx_ring->rx_buffer_info = vmalloc_node(size, ring_node); | |
| if (!rx_ring->rx_buffer_info) | |
| rx_ring->rx_buffer_info = vmalloc(size); | |
| if (!rx_ring->rx_buffer_info) | |
| goto err; | |
| /* Round up to nearest 4K */ | |
| rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc); | |
| rx_ring->size = ALIGN(rx_ring->size, 4096); | |
| set_dev_node(dev, ring_node); | |
| rx_ring->desc = dma_alloc_coherent(dev, | |
| rx_ring->size, | |
| &rx_ring->dma, | |
| GFP_KERNEL); | |
| set_dev_node(dev, orig_node); | |
| if (!rx_ring->desc) | |
| rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, | |
| &rx_ring->dma, GFP_KERNEL); | |
| if (!rx_ring->desc) | |
| goto err; | |
| rx_ring->next_to_clean = 0; | |
| rx_ring->next_to_use = 0; | |
| rx_ring->xdp_prog = adapter->xdp_prog; | |
| return 0; | |
| err: | |
| vfree(rx_ring->rx_buffer_info); | |
| rx_ring->rx_buffer_info = NULL; | |
| dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n"); | |
| return -ENOMEM; | |
| } | |
| /** | |
| * ixgbe_setup_all_rx_resources - allocate all queues Rx resources | |
| * @adapter: board private structure | |
| * | |
| * If this function returns with an error, then it's possible one or | |
| * more of the rings is populated (while the rest are not). It is the | |
| * callers duty to clean those orphaned rings. | |
| * | |
| * Return 0 on success, negative on failure | |
| **/ | |
| static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter) | |
| { | |
| int i, err = 0; | |
| for (i = 0; i < adapter->num_rx_queues; i++) { | |
| err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]); | |
| if (!err) | |
| continue; | |
| e_err(probe, "Allocation for Rx Queue %u failed\n", i); | |
| goto err_setup_rx; | |
| } | |
| #ifdef IXGBE_FCOE | |
| err = ixgbe_setup_fcoe_ddp_resources(adapter); | |
| if (!err) | |
| #endif | |
| return 0; | |
| err_setup_rx: | |
| /* rewind the index freeing the rings as we go */ | |
| while (i--) | |
| ixgbe_free_rx_resources(adapter->rx_ring[i]); | |
| return err; | |
| } | |
| /** | |
| * ixgbe_free_tx_resources - Free Tx Resources per Queue | |
| * @tx_ring: Tx descriptor ring for a specific queue | |
| * | |
| * Free all transmit software resources | |
| **/ | |
| void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring) | |
| { | |
| ixgbe_clean_tx_ring(tx_ring); | |
| vfree(tx_ring->tx_buffer_info); | |
| tx_ring->tx_buffer_info = NULL; | |
| /* if not set, then don't free */ | |
| if (!tx_ring->desc) | |
| return; | |
| dma_free_coherent(tx_ring->dev, tx_ring->size, | |
| tx_ring->desc, tx_ring->dma); | |
| tx_ring->desc = NULL; | |
| } | |
| /** | |
| * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues | |
| * @adapter: board private structure | |
| * | |
| * Free all transmit software resources | |
| **/ | |
| static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter) | |
| { | |
| int i; | |
| for (i = 0; i < adapter->num_tx_queues; i++) | |
| if (adapter->tx_ring[i]->desc) | |
| ixgbe_free_tx_resources(adapter->tx_ring[i]); | |
| for (i = 0; i < adapter->num_xdp_queues; i++) | |
| if (adapter->xdp_ring[i]->desc) | |
| ixgbe_free_tx_resources(adapter->xdp_ring[i]); | |
| } | |
| /** | |
| * ixgbe_free_rx_resources - Free Rx Resources | |
| * @rx_ring: ring to clean the resources from | |
| * | |
| * Free all receive software resources | |
| **/ | |
| void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring) | |
| { | |
| ixgbe_clean_rx_ring(rx_ring); | |
| rx_ring->xdp_prog = NULL; | |
| vfree(rx_ring->rx_buffer_info); | |
| rx_ring->rx_buffer_info = NULL; | |
| /* if not set, then don't free */ | |
| if (!rx_ring->desc) | |
| return; | |
| dma_free_coherent(rx_ring->dev, rx_ring->size, | |
| rx_ring->desc, rx_ring->dma); | |
| rx_ring->desc = NULL; | |
| } | |
| /** | |
| * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues | |
| * @adapter: board private structure | |
| * | |
| * Free all receive software resources | |
| **/ | |
| static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) | |
| { | |
| int i; | |
| #ifdef IXGBE_FCOE | |
| ixgbe_free_fcoe_ddp_resources(adapter); | |
| #endif | |
| for (i = 0; i < adapter->num_rx_queues; i++) | |
| if (adapter->rx_ring[i]->desc) | |
| ixgbe_free_rx_resources(adapter->rx_ring[i]); | |
| } | |
| /** | |
| * ixgbe_change_mtu - Change the Maximum Transfer Unit | |
| * @netdev: network interface device structure | |
| * @new_mtu: new value for maximum frame size | |
| * | |
| * Returns 0 on success, negative on failure | |
| **/ | |
| static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| /* | |
| * For 82599EB we cannot allow legacy VFs to enable their receive | |
| * paths when MTU greater than 1500 is configured. So display a | |
| * warning that legacy VFs will be disabled. | |
| */ | |
| if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && | |
| (adapter->hw.mac.type == ixgbe_mac_82599EB) && | |
| (new_mtu > ETH_DATA_LEN)) | |
| e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n"); | |
| e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); | |
| /* must set new MTU before calling down or up */ | |
| netdev->mtu = new_mtu; | |
| if (netif_running(netdev)) | |
| ixgbe_reinit_locked(adapter); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_open - Called when a network interface is made active | |
| * @netdev: network interface device structure | |
| * | |
| * Returns 0 on success, negative value on failure | |
| * | |
| * The open entry point is called when a network interface is made | |
| * active by the system (IFF_UP). At this point all resources needed | |
| * for transmit and receive operations are allocated, the interrupt | |
| * handler is registered with the OS, the watchdog timer is started, | |
| * and the stack is notified that the interface is ready. | |
| **/ | |
| int ixgbe_open(struct net_device *netdev) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int err, queues; | |
| /* disallow open during test */ | |
| if (test_bit(__IXGBE_TESTING, &adapter->state)) | |
| return -EBUSY; | |
| netif_carrier_off(netdev); | |
| /* allocate transmit descriptors */ | |
| err = ixgbe_setup_all_tx_resources(adapter); | |
| if (err) | |
| goto err_setup_tx; | |
| /* allocate receive descriptors */ | |
| err = ixgbe_setup_all_rx_resources(adapter); | |
| if (err) | |
| goto err_setup_rx; | |
| ixgbe_configure(adapter); | |
| err = ixgbe_request_irq(adapter); | |
| if (err) | |
| goto err_req_irq; | |
| /* Notify the stack of the actual queue counts. */ | |
| if (adapter->num_rx_pools > 1) | |
| queues = adapter->num_rx_queues_per_pool; | |
| else | |
| queues = adapter->num_tx_queues; | |
| err = netif_set_real_num_tx_queues(netdev, queues); | |
| if (err) | |
| goto err_set_queues; | |
| if (adapter->num_rx_pools > 1 && | |
| adapter->num_rx_queues > IXGBE_MAX_L2A_QUEUES) | |
| queues = IXGBE_MAX_L2A_QUEUES; | |
| else | |
| queues = adapter->num_rx_queues; | |
| err = netif_set_real_num_rx_queues(netdev, queues); | |
| if (err) | |
| goto err_set_queues; | |
| ixgbe_ptp_init(adapter); | |
| ixgbe_up_complete(adapter); | |
| ixgbe_clear_udp_tunnel_port(adapter, IXGBE_VXLANCTRL_ALL_UDPPORT_MASK); | |
| udp_tunnel_get_rx_info(netdev); | |
| return 0; | |
| err_set_queues: | |
| ixgbe_free_irq(adapter); | |
| err_req_irq: | |
| ixgbe_free_all_rx_resources(adapter); | |
| if (hw->phy.ops.set_phy_power && !adapter->wol) | |
| hw->phy.ops.set_phy_power(&adapter->hw, false); | |
| err_setup_rx: | |
| ixgbe_free_all_tx_resources(adapter); | |
| err_setup_tx: | |
| ixgbe_reset(adapter); | |
| return err; | |
| } | |
| static void ixgbe_close_suspend(struct ixgbe_adapter *adapter) | |
| { | |
| ixgbe_ptp_suspend(adapter); | |
| if (adapter->hw.phy.ops.enter_lplu) { | |
| adapter->hw.phy.reset_disable = true; | |
| ixgbe_down(adapter); | |
| adapter->hw.phy.ops.enter_lplu(&adapter->hw); | |
| adapter->hw.phy.reset_disable = false; | |
| } else { | |
| ixgbe_down(adapter); | |
| } | |
| ixgbe_free_irq(adapter); | |
| ixgbe_free_all_tx_resources(adapter); | |
| ixgbe_free_all_rx_resources(adapter); | |
| } | |
| /** | |
| * ixgbe_close - Disables a network interface | |
| * @netdev: network interface device structure | |
| * | |
| * Returns 0, this is not allowed to fail | |
| * | |
| * The close entry point is called when an interface is de-activated | |
| * by the OS. The hardware is still under the drivers control, but | |
| * needs to be disabled. A global MAC reset is issued to stop the | |
| * hardware, and all transmit and receive resources are freed. | |
| **/ | |
| int ixgbe_close(struct net_device *netdev) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| ixgbe_ptp_stop(adapter); | |
| if (netif_device_present(netdev)) | |
| ixgbe_close_suspend(adapter); | |
| ixgbe_fdir_filter_exit(adapter); | |
| ixgbe_release_hw_control(adapter); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int ixgbe_resume(struct pci_dev *pdev) | |
| { | |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); | |
| struct net_device *netdev = adapter->netdev; | |
| u32 err; | |
| adapter->hw.hw_addr = adapter->io_addr; | |
| pci_set_power_state(pdev, PCI_D0); | |
| pci_restore_state(pdev); | |
| /* | |
| * pci_restore_state clears dev->state_saved so call | |
| * pci_save_state to restore it. | |
| */ | |
| pci_save_state(pdev); | |
| err = pci_enable_device_mem(pdev); | |
| if (err) { | |
| e_dev_err("Cannot enable PCI device from suspend\n"); | |
| return err; | |
| } | |
| smp_mb__before_atomic(); | |
| clear_bit(__IXGBE_DISABLED, &adapter->state); | |
| pci_set_master(pdev); | |
| pci_wake_from_d3(pdev, false); | |
| ixgbe_reset(adapter); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); | |
| rtnl_lock(); | |
| err = ixgbe_init_interrupt_scheme(adapter); | |
| if (!err && netif_running(netdev)) | |
| err = ixgbe_open(netdev); | |
| if (!err) | |
| netif_device_attach(netdev); | |
| rtnl_unlock(); | |
| return err; | |
| } | |
| #endif /* CONFIG_PM */ | |
| static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) | |
| { | |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); | |
| struct net_device *netdev = adapter->netdev; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 ctrl, fctrl; | |
| u32 wufc = adapter->wol; | |
| #ifdef CONFIG_PM | |
| int retval = 0; | |
| #endif | |
| rtnl_lock(); | |
| netif_device_detach(netdev); | |
| if (netif_running(netdev)) | |
| ixgbe_close_suspend(adapter); | |
| ixgbe_clear_interrupt_scheme(adapter); | |
| rtnl_unlock(); | |
| #ifdef CONFIG_PM | |
| retval = pci_save_state(pdev); | |
| if (retval) | |
| return retval; | |
| #endif | |
| if (hw->mac.ops.stop_link_on_d3) | |
| hw->mac.ops.stop_link_on_d3(hw); | |
| if (wufc) { | |
| ixgbe_set_rx_mode(netdev); | |
| /* enable the optics for 82599 SFP+ fiber as we can WoL */ | |
| if (hw->mac.ops.enable_tx_laser) | |
| hw->mac.ops.enable_tx_laser(hw); | |
| /* turn on all-multi mode if wake on multicast is enabled */ | |
| if (wufc & IXGBE_WUFC_MC) { | |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); | |
| fctrl |= IXGBE_FCTRL_MPE; | |
| IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); | |
| } | |
| ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); | |
| ctrl |= IXGBE_CTRL_GIO_DIS; | |
| IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); | |
| IXGBE_WRITE_REG(hw, IXGBE_WUFC, wufc); | |
| } else { | |
| IXGBE_WRITE_REG(hw, IXGBE_WUC, 0); | |
| IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0); | |
| } | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| pci_wake_from_d3(pdev, false); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| pci_wake_from_d3(pdev, !!wufc); | |
| break; | |
| default: | |
| break; | |
| } | |
| *enable_wake = !!wufc; | |
| if (hw->phy.ops.set_phy_power && !*enable_wake) | |
| hw->phy.ops.set_phy_power(hw, false); | |
| ixgbe_release_hw_control(adapter); | |
| if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state)) | |
| pci_disable_device(pdev); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) | |
| { | |
| int retval; | |
| bool wake; | |
| retval = __ixgbe_shutdown(pdev, &wake); | |
| if (retval) | |
| return retval; | |
| if (wake) { | |
| pci_prepare_to_sleep(pdev); | |
| } else { | |
| pci_wake_from_d3(pdev, false); | |
| pci_set_power_state(pdev, PCI_D3hot); | |
| } | |
| return 0; | |
| } | |
| #endif /* CONFIG_PM */ | |
| static void ixgbe_shutdown(struct pci_dev *pdev) | |
| { | |
| bool wake; | |
| __ixgbe_shutdown(pdev, &wake); | |
| if (system_state == SYSTEM_POWER_OFF) { | |
| pci_wake_from_d3(pdev, wake); | |
| pci_set_power_state(pdev, PCI_D3hot); | |
| } | |
| } | |
| /** | |
| * ixgbe_update_stats - Update the board statistics counters. | |
| * @adapter: board private structure | |
| **/ | |
| void ixgbe_update_stats(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct ixgbe_hw_stats *hwstats = &adapter->stats; | |
| u64 total_mpc = 0; | |
| u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot; | |
| u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0; | |
| u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0; | |
| u64 alloc_rx_page = 0; | |
| u64 bytes = 0, packets = 0, hw_csum_rx_error = 0; | |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || | |
| test_bit(__IXGBE_RESETTING, &adapter->state)) | |
| return; | |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { | |
| u64 rsc_count = 0; | |
| u64 rsc_flush = 0; | |
| for (i = 0; i < adapter->num_rx_queues; i++) { | |
| rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count; | |
| rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush; | |
| } | |
| adapter->rsc_total_count = rsc_count; | |
| adapter->rsc_total_flush = rsc_flush; | |
| } | |
| for (i = 0; i < adapter->num_rx_queues; i++) { | |
| struct ixgbe_ring *rx_ring = adapter->rx_ring[i]; | |
| non_eop_descs += rx_ring->rx_stats.non_eop_descs; | |
| alloc_rx_page += rx_ring->rx_stats.alloc_rx_page; | |
| alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed; | |
| alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed; | |
| hw_csum_rx_error += rx_ring->rx_stats.csum_err; | |
| bytes += rx_ring->stats.bytes; | |
| packets += rx_ring->stats.packets; | |
| } | |
| adapter->non_eop_descs = non_eop_descs; | |
| adapter->alloc_rx_page = alloc_rx_page; | |
| adapter->alloc_rx_page_failed = alloc_rx_page_failed; | |
| adapter->alloc_rx_buff_failed = alloc_rx_buff_failed; | |
| adapter->hw_csum_rx_error = hw_csum_rx_error; | |
| netdev->stats.rx_bytes = bytes; | |
| netdev->stats.rx_packets = packets; | |
| bytes = 0; | |
| packets = 0; | |
| /* gather some stats to the adapter struct that are per queue */ | |
| for (i = 0; i < adapter->num_tx_queues; i++) { | |
| struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; | |
| restart_queue += tx_ring->tx_stats.restart_queue; | |
| tx_busy += tx_ring->tx_stats.tx_busy; | |
| bytes += tx_ring->stats.bytes; | |
| packets += tx_ring->stats.packets; | |
| } | |
| for (i = 0; i < adapter->num_xdp_queues; i++) { | |
| struct ixgbe_ring *xdp_ring = adapter->xdp_ring[i]; | |
| restart_queue += xdp_ring->tx_stats.restart_queue; | |
| tx_busy += xdp_ring->tx_stats.tx_busy; | |
| bytes += xdp_ring->stats.bytes; | |
| packets += xdp_ring->stats.packets; | |
| } | |
| adapter->restart_queue = restart_queue; | |
| adapter->tx_busy = tx_busy; | |
| netdev->stats.tx_bytes = bytes; | |
| netdev->stats.tx_packets = packets; | |
| hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS); | |
| /* 8 register reads */ | |
| for (i = 0; i < 8; i++) { | |
| /* for packet buffers not used, the register should read 0 */ | |
| mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i)); | |
| missed_rx += mpc; | |
| hwstats->mpc[i] += mpc; | |
| total_mpc += hwstats->mpc[i]; | |
| hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); | |
| hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); | |
| hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i)); | |
| hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i)); | |
| hwstats->pxonrxc[i] += | |
| IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); | |
| break; | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| hwstats->pxonrxc[i] += | |
| IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /*16 register reads */ | |
| for (i = 0; i < 16; i++) { | |
| hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i)); | |
| hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i)); | |
| if ((hw->mac.type == ixgbe_mac_82599EB) || | |
| (hw->mac.type == ixgbe_mac_X540) || | |
| (hw->mac.type == ixgbe_mac_X550) || | |
| (hw->mac.type == ixgbe_mac_X550EM_x) || | |
| (hw->mac.type == ixgbe_mac_x550em_a)) { | |
| hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); | |
| IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); /* to clear */ | |
| hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); | |
| IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); /* to clear */ | |
| } | |
| } | |
| hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC); | |
| /* work around hardware counting issue */ | |
| hwstats->gprc -= missed_rx; | |
| ixgbe_update_xoff_received(adapter); | |
| /* 82598 hardware only has a 32 bit counter in the high register */ | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); | |
| hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); | |
| hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); | |
| hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH); | |
| break; | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| /* OS2BMC stats are X540 and later */ | |
| hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC); | |
| hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC); | |
| hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC); | |
| hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC); | |
| /* fall through */ | |
| case ixgbe_mac_82599EB: | |
| for (i = 0; i < 16; i++) | |
| adapter->hw_rx_no_dma_resources += | |
| IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); | |
| hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); | |
| IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ | |
| hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); | |
| IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */ | |
| hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL); | |
| IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */ | |
| hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); | |
| hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); | |
| hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS); | |
| #ifdef IXGBE_FCOE | |
| hwstats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC); | |
| hwstats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC); | |
| hwstats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC); | |
| hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC); | |
| hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC); | |
| hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC); | |
| /* Add up per cpu counters for total ddp aloc fail */ | |
| if (adapter->fcoe.ddp_pool) { | |
| struct ixgbe_fcoe *fcoe = &adapter->fcoe; | |
| struct ixgbe_fcoe_ddp_pool *ddp_pool; | |
| unsigned int cpu; | |
| u64 noddp = 0, noddp_ext_buff = 0; | |
| for_each_possible_cpu(cpu) { | |
| ddp_pool = per_cpu_ptr(fcoe->ddp_pool, cpu); | |
| noddp += ddp_pool->noddp; | |
| noddp_ext_buff += ddp_pool->noddp_ext_buff; | |
| } | |
| hwstats->fcoe_noddp = noddp; | |
| hwstats->fcoe_noddp_ext_buff = noddp_ext_buff; | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| break; | |
| default: | |
| break; | |
| } | |
| bprc = IXGBE_READ_REG(hw, IXGBE_BPRC); | |
| hwstats->bprc += bprc; | |
| hwstats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC); | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| hwstats->mprc -= bprc; | |
| hwstats->roc += IXGBE_READ_REG(hw, IXGBE_ROC); | |
| hwstats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64); | |
| hwstats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127); | |
| hwstats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255); | |
| hwstats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511); | |
| hwstats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023); | |
| hwstats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522); | |
| hwstats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); | |
| lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC); | |
| hwstats->lxontxc += lxon; | |
| lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); | |
| hwstats->lxofftxc += lxoff; | |
| hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC); | |
| hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC); | |
| /* | |
| * 82598 errata - tx of flow control packets is included in tx counters | |
| */ | |
| xon_off_tot = lxon + lxoff; | |
| hwstats->gptc -= xon_off_tot; | |
| hwstats->mptc -= xon_off_tot; | |
| hwstats->gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN)); | |
| hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC); | |
| hwstats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC); | |
| hwstats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC); | |
| hwstats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR); | |
| hwstats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64); | |
| hwstats->ptc64 -= xon_off_tot; | |
| hwstats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127); | |
| hwstats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255); | |
| hwstats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511); | |
| hwstats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023); | |
| hwstats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522); | |
| hwstats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC); | |
| /* Fill out the OS statistics structure */ | |
| netdev->stats.multicast = hwstats->mprc; | |
| /* Rx Errors */ | |
| netdev->stats.rx_errors = hwstats->crcerrs + hwstats->rlec; | |
| netdev->stats.rx_dropped = 0; | |
| netdev->stats.rx_length_errors = hwstats->rlec; | |
| netdev->stats.rx_crc_errors = hwstats->crcerrs; | |
| netdev->stats.rx_missed_errors = total_mpc; | |
| } | |
| /** | |
| * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table | |
| * @adapter: pointer to the device adapter structure | |
| **/ | |
| static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| int i; | |
| if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) | |
| return; | |
| adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT; | |
| /* if interface is down do nothing */ | |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) | |
| return; | |
| /* do nothing if we are not using signature filters */ | |
| if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) | |
| return; | |
| adapter->fdir_overflow++; | |
| if (ixgbe_reinit_fdir_tables_82599(hw) == 0) { | |
| for (i = 0; i < adapter->num_tx_queues; i++) | |
| set_bit(__IXGBE_TX_FDIR_INIT_DONE, | |
| &(adapter->tx_ring[i]->state)); | |
| for (i = 0; i < adapter->num_xdp_queues; i++) | |
| set_bit(__IXGBE_TX_FDIR_INIT_DONE, | |
| &adapter->xdp_ring[i]->state); | |
| /* re-enable flow director interrupts */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR); | |
| } else { | |
| e_err(probe, "failed to finish FDIR re-initialization, " | |
| "ignored adding FDIR ATR filters\n"); | |
| } | |
| } | |
| /** | |
| * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts | |
| * @adapter: pointer to the device adapter structure | |
| * | |
| * This function serves two purposes. First it strobes the interrupt lines | |
| * in order to make certain interrupts are occurring. Secondly it sets the | |
| * bits needed to check for TX hangs. As a result we should immediately | |
| * determine if a hang has occurred. | |
| */ | |
| static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u64 eics = 0; | |
| int i; | |
| /* If we're down, removing or resetting, just bail */ | |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || | |
| test_bit(__IXGBE_REMOVING, &adapter->state) || | |
| test_bit(__IXGBE_RESETTING, &adapter->state)) | |
| return; | |
| /* Force detection of hung controller */ | |
| if (netif_carrier_ok(adapter->netdev)) { | |
| for (i = 0; i < adapter->num_tx_queues; i++) | |
| set_check_for_tx_hang(adapter->tx_ring[i]); | |
| for (i = 0; i < adapter->num_xdp_queues; i++) | |
| set_check_for_tx_hang(adapter->xdp_ring[i]); | |
| } | |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { | |
| /* | |
| * for legacy and MSI interrupts don't set any bits | |
| * that are enabled for EIAM, because this operation | |
| * would set *both* EIMS and EICS for any bit in EIAM | |
| */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EICS, | |
| (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); | |
| } else { | |
| /* get one bit for every active tx/rx interrupt vector */ | |
| for (i = 0; i < adapter->num_q_vectors; i++) { | |
| struct ixgbe_q_vector *qv = adapter->q_vector[i]; | |
| if (qv->rx.ring || qv->tx.ring) | |
| eics |= BIT_ULL(i); | |
| } | |
| } | |
| /* Cause software interrupt to ensure rings are cleaned */ | |
| ixgbe_irq_rearm_queues(adapter, eics); | |
| } | |
| /** | |
| * ixgbe_watchdog_update_link - update the link status | |
| * @adapter: pointer to the device adapter structure | |
| * @link_speed: pointer to a u32 to store the link_speed | |
| **/ | |
| static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 link_speed = adapter->link_speed; | |
| bool link_up = adapter->link_up; | |
| bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; | |
| if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) | |
| return; | |
| if (hw->mac.ops.check_link) { | |
| hw->mac.ops.check_link(hw, &link_speed, &link_up, false); | |
| } else { | |
| /* always assume link is up, if no check link function */ | |
| link_speed = IXGBE_LINK_SPEED_10GB_FULL; | |
| link_up = true; | |
| } | |
| if (adapter->ixgbe_ieee_pfc) | |
| pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); | |
| if (link_up && !((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && pfc_en)) { | |
| hw->mac.ops.fc_enable(hw); | |
| ixgbe_set_rx_drop_en(adapter); | |
| } | |
| if (link_up || | |
| time_after(jiffies, (adapter->link_check_timeout + | |
| IXGBE_TRY_LINK_TIMEOUT))) { | |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); | |
| IXGBE_WRITE_FLUSH(hw); | |
| } | |
| adapter->link_up = link_up; | |
| adapter->link_speed = link_speed; | |
| } | |
| static void ixgbe_update_default_up(struct ixgbe_adapter *adapter) | |
| { | |
| #ifdef CONFIG_IXGBE_DCB | |
| struct net_device *netdev = adapter->netdev; | |
| struct dcb_app app = { | |
| .selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE, | |
| .protocol = 0, | |
| }; | |
| u8 up = 0; | |
| if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) | |
| up = dcb_ieee_getapp_mask(netdev, &app); | |
| adapter->default_up = (up > 1) ? (ffs(up) - 1) : 0; | |
| #endif | |
| } | |
| static int ixgbe_enable_macvlan(struct net_device *upper, void *data) | |
| { | |
| if (netif_is_macvlan(upper)) { | |
| struct macvlan_dev *vlan = netdev_priv(upper); | |
| if (vlan->fwd_priv) | |
| netif_tx_wake_all_queues(upper); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_watchdog_link_is_up - update netif_carrier status and | |
| * print link up message | |
| * @adapter: pointer to the device adapter structure | |
| **/ | |
| static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 link_speed = adapter->link_speed; | |
| const char *speed_str; | |
| bool flow_rx, flow_tx; | |
| /* only continue if link was previously down */ | |
| if (netif_carrier_ok(netdev)) | |
| return; | |
| adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: { | |
| u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL); | |
| u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS); | |
| flow_rx = !!(frctl & IXGBE_FCTRL_RFCE); | |
| flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X); | |
| } | |
| break; | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| case ixgbe_mac_82599EB: { | |
| u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN); | |
| u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG); | |
| flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE); | |
| flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X); | |
| } | |
| break; | |
| default: | |
| flow_tx = false; | |
| flow_rx = false; | |
| break; | |
| } | |
| adapter->last_rx_ptp_check = jiffies; | |
| if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) | |
| ixgbe_ptp_start_cyclecounter(adapter); | |
| switch (link_speed) { | |
| case IXGBE_LINK_SPEED_10GB_FULL: | |
| speed_str = "10 Gbps"; | |
| break; | |
| case IXGBE_LINK_SPEED_2_5GB_FULL: | |
| speed_str = "2.5 Gbps"; | |
| break; | |
| case IXGBE_LINK_SPEED_1GB_FULL: | |
| speed_str = "1 Gbps"; | |
| break; | |
| case IXGBE_LINK_SPEED_100_FULL: | |
| speed_str = "100 Mbps"; | |
| break; | |
| case IXGBE_LINK_SPEED_10_FULL: | |
| speed_str = "10 Mbps"; | |
| break; | |
| default: | |
| speed_str = "unknown speed"; | |
| break; | |
| } | |
| e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", speed_str, | |
| ((flow_rx && flow_tx) ? "RX/TX" : | |
| (flow_rx ? "RX" : | |
| (flow_tx ? "TX" : "None")))); | |
| netif_carrier_on(netdev); | |
| ixgbe_check_vf_rate_limit(adapter); | |
| /* enable transmits */ | |
| netif_tx_wake_all_queues(adapter->netdev); | |
| /* enable any upper devices */ | |
| rtnl_lock(); | |
| netdev_walk_all_upper_dev_rcu(adapter->netdev, | |
| ixgbe_enable_macvlan, NULL); | |
| rtnl_unlock(); | |
| /* update the default user priority for VFs */ | |
| ixgbe_update_default_up(adapter); | |
| /* ping all the active vfs to let them know link has changed */ | |
| ixgbe_ping_all_vfs(adapter); | |
| } | |
| /** | |
| * ixgbe_watchdog_link_is_down - update netif_carrier status and | |
| * print link down message | |
| * @adapter: pointer to the adapter structure | |
| **/ | |
| static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| adapter->link_up = false; | |
| adapter->link_speed = 0; | |
| /* only continue if link was up previously */ | |
| if (!netif_carrier_ok(netdev)) | |
| return; | |
| /* poll for SFP+ cable when link is down */ | |
| if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB) | |
| adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; | |
| if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) | |
| ixgbe_ptp_start_cyclecounter(adapter); | |
| e_info(drv, "NIC Link is Down\n"); | |
| netif_carrier_off(netdev); | |
| /* ping all the active vfs to let them know link has changed */ | |
| ixgbe_ping_all_vfs(adapter); | |
| } | |
| static bool ixgbe_ring_tx_pending(struct ixgbe_adapter *adapter) | |
| { | |
| int i; | |
| for (i = 0; i < adapter->num_tx_queues; i++) { | |
| struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; | |
| if (tx_ring->next_to_use != tx_ring->next_to_clean) | |
| return true; | |
| } | |
| for (i = 0; i < adapter->num_xdp_queues; i++) { | |
| struct ixgbe_ring *ring = adapter->xdp_ring[i]; | |
| if (ring->next_to_use != ring->next_to_clean) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static bool ixgbe_vf_tx_pending(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; | |
| u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask); | |
| int i, j; | |
| if (!adapter->num_vfs) | |
| return false; | |
| /* resetting the PF is only needed for MAC before X550 */ | |
| if (hw->mac.type >= ixgbe_mac_X550) | |
| return false; | |
| for (i = 0; i < adapter->num_vfs; i++) { | |
| for (j = 0; j < q_per_pool; j++) { | |
| u32 h, t; | |
| h = IXGBE_READ_REG(hw, IXGBE_PVFTDHN(q_per_pool, i, j)); | |
| t = IXGBE_READ_REG(hw, IXGBE_PVFTDTN(q_per_pool, i, j)); | |
| if (h != t) | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| /** | |
| * ixgbe_watchdog_flush_tx - flush queues on link down | |
| * @adapter: pointer to the device adapter structure | |
| **/ | |
| static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter) | |
| { | |
| if (!netif_carrier_ok(adapter->netdev)) { | |
| if (ixgbe_ring_tx_pending(adapter) || | |
| ixgbe_vf_tx_pending(adapter)) { | |
| /* We've lost link, so the controller stops DMA, | |
| * but we've got queued Tx work that's never going | |
| * to get done, so reset controller to flush Tx. | |
| * (Do the reset outside of interrupt context). | |
| */ | |
| e_warn(drv, "initiating reset to clear Tx work after link loss\n"); | |
| set_bit(__IXGBE_RESET_REQUESTED, &adapter->state); | |
| } | |
| } | |
| } | |
| #ifdef CONFIG_PCI_IOV | |
| static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct pci_dev *pdev = adapter->pdev; | |
| unsigned int vf; | |
| u32 gpc; | |
| if (!(netif_carrier_ok(adapter->netdev))) | |
| return; | |
| gpc = IXGBE_READ_REG(hw, IXGBE_TXDGPC); | |
| if (gpc) /* If incrementing then no need for the check below */ | |
| return; | |
| /* Check to see if a bad DMA write target from an errant or | |
| * malicious VF has caused a PCIe error. If so then we can | |
| * issue a VFLR to the offending VF(s) and then resume without | |
| * requesting a full slot reset. | |
| */ | |
| if (!pdev) | |
| return; | |
| /* check status reg for all VFs owned by this PF */ | |
| for (vf = 0; vf < adapter->num_vfs; ++vf) { | |
| struct pci_dev *vfdev = adapter->vfinfo[vf].vfdev; | |
| u16 status_reg; | |
| if (!vfdev) | |
| continue; | |
| pci_read_config_word(vfdev, PCI_STATUS, &status_reg); | |
| if (status_reg != IXGBE_FAILED_READ_CFG_WORD && | |
| status_reg & PCI_STATUS_REC_MASTER_ABORT) | |
| pcie_flr(vfdev); | |
| } | |
| } | |
| static void ixgbe_spoof_check(struct ixgbe_adapter *adapter) | |
| { | |
| u32 ssvpc; | |
| /* Do not perform spoof check for 82598 or if not in IOV mode */ | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB || | |
| adapter->num_vfs == 0) | |
| return; | |
| ssvpc = IXGBE_READ_REG(&adapter->hw, IXGBE_SSVPC); | |
| /* | |
| * ssvpc register is cleared on read, if zero then no | |
| * spoofed packets in the last interval. | |
| */ | |
| if (!ssvpc) | |
| return; | |
| e_warn(drv, "%u Spoofed packets detected\n", ssvpc); | |
| } | |
| #else | |
| static void ixgbe_spoof_check(struct ixgbe_adapter __always_unused *adapter) | |
| { | |
| } | |
| static void | |
| ixgbe_check_for_bad_vf(struct ixgbe_adapter __always_unused *adapter) | |
| { | |
| } | |
| #endif /* CONFIG_PCI_IOV */ | |
| /** | |
| * ixgbe_watchdog_subtask - check and bring link up | |
| * @adapter: pointer to the device adapter structure | |
| **/ | |
| static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter) | |
| { | |
| /* if interface is down, removing or resetting, do nothing */ | |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || | |
| test_bit(__IXGBE_REMOVING, &adapter->state) || | |
| test_bit(__IXGBE_RESETTING, &adapter->state)) | |
| return; | |
| ixgbe_watchdog_update_link(adapter); | |
| if (adapter->link_up) | |
| ixgbe_watchdog_link_is_up(adapter); | |
| else | |
| ixgbe_watchdog_link_is_down(adapter); | |
| ixgbe_check_for_bad_vf(adapter); | |
| ixgbe_spoof_check(adapter); | |
| ixgbe_update_stats(adapter); | |
| ixgbe_watchdog_flush_tx(adapter); | |
| } | |
| /** | |
| * ixgbe_sfp_detection_subtask - poll for SFP+ cable | |
| * @adapter: the ixgbe adapter structure | |
| **/ | |
| static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| s32 err; | |
| /* not searching for SFP so there is nothing to do here */ | |
| if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) && | |
| !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) | |
| return; | |
| if (adapter->sfp_poll_time && | |
| time_after(adapter->sfp_poll_time, jiffies)) | |
| return; /* If not yet time to poll for SFP */ | |
| /* someone else is in init, wait until next service event */ | |
| if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) | |
| return; | |
| adapter->sfp_poll_time = jiffies + IXGBE_SFP_POLL_JIFFIES - 1; | |
| err = hw->phy.ops.identify_sfp(hw); | |
| if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) | |
| goto sfp_out; | |
| if (err == IXGBE_ERR_SFP_NOT_PRESENT) { | |
| /* If no cable is present, then we need to reset | |
| * the next time we find a good cable. */ | |
| adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; | |
| } | |
| /* exit on error */ | |
| if (err) | |
| goto sfp_out; | |
| /* exit if reset not needed */ | |
| if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) | |
| goto sfp_out; | |
| adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET; | |
| /* | |
| * A module may be identified correctly, but the EEPROM may not have | |
| * support for that module. setup_sfp() will fail in that case, so | |
| * we should not allow that module to load. | |
| */ | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| err = hw->phy.ops.reset(hw); | |
| else | |
| err = hw->mac.ops.setup_sfp(hw); | |
| if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) | |
| goto sfp_out; | |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; | |
| e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type); | |
| sfp_out: | |
| clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); | |
| if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) && | |
| (adapter->netdev->reg_state == NETREG_REGISTERED)) { | |
| e_dev_err("failed to initialize because an unsupported " | |
| "SFP+ module type was detected.\n"); | |
| e_dev_err("Reload the driver after installing a " | |
| "supported module.\n"); | |
| unregister_netdev(adapter->netdev); | |
| } | |
| } | |
| /** | |
| * ixgbe_sfp_link_config_subtask - set up link SFP after module install | |
| * @adapter: the ixgbe adapter structure | |
| **/ | |
| static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 speed; | |
| bool autoneg = false; | |
| if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG)) | |
| return; | |
| /* someone else is in init, wait until next service event */ | |
| if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) | |
| return; | |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; | |
| speed = hw->phy.autoneg_advertised; | |
| if ((!speed) && (hw->mac.ops.get_link_capabilities)) { | |
| hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg); | |
| /* setup the highest link when no autoneg */ | |
| if (!autoneg) { | |
| if (speed & IXGBE_LINK_SPEED_10GB_FULL) | |
| speed = IXGBE_LINK_SPEED_10GB_FULL; | |
| } | |
| } | |
| if (hw->mac.ops.setup_link) | |
| hw->mac.ops.setup_link(hw, speed, true); | |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; | |
| adapter->link_check_timeout = jiffies; | |
| clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); | |
| } | |
| /** | |
| * ixgbe_service_timer - Timer Call-back | |
| * @data: pointer to adapter cast into an unsigned long | |
| **/ | |
| static void ixgbe_service_timer(struct timer_list *t) | |
| { | |
| struct ixgbe_adapter *adapter = from_timer(adapter, t, service_timer); | |
| unsigned long next_event_offset; | |
| /* poll faster when waiting for link */ | |
| if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) | |
| next_event_offset = HZ / 10; | |
| else | |
| next_event_offset = HZ * 2; | |
| /* Reset the timer */ | |
| mod_timer(&adapter->service_timer, next_event_offset + jiffies); | |
| ixgbe_service_event_schedule(adapter); | |
| } | |
| static void ixgbe_phy_interrupt_subtask(struct ixgbe_adapter *adapter) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 status; | |
| if (!(adapter->flags2 & IXGBE_FLAG2_PHY_INTERRUPT)) | |
| return; | |
| adapter->flags2 &= ~IXGBE_FLAG2_PHY_INTERRUPT; | |
| if (!hw->phy.ops.handle_lasi) | |
| return; | |
| status = hw->phy.ops.handle_lasi(&adapter->hw); | |
| if (status != IXGBE_ERR_OVERTEMP) | |
| return; | |
| e_crit(drv, "%s\n", ixgbe_overheat_msg); | |
| } | |
| static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter) | |
| { | |
| if (!test_and_clear_bit(__IXGBE_RESET_REQUESTED, &adapter->state)) | |
| return; | |
| /* If we're already down, removing or resetting, just bail */ | |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || | |
| test_bit(__IXGBE_REMOVING, &adapter->state) || | |
| test_bit(__IXGBE_RESETTING, &adapter->state)) | |
| return; | |
| ixgbe_dump(adapter); | |
| netdev_err(adapter->netdev, "Reset adapter\n"); | |
| adapter->tx_timeout_count++; | |
| rtnl_lock(); | |
| ixgbe_reinit_locked(adapter); | |
| rtnl_unlock(); | |
| } | |
| /** | |
| * ixgbe_service_task - manages and runs subtasks | |
| * @work: pointer to work_struct containing our data | |
| **/ | |
| static void ixgbe_service_task(struct work_struct *work) | |
| { | |
| struct ixgbe_adapter *adapter = container_of(work, | |
| struct ixgbe_adapter, | |
| service_task); | |
| if (ixgbe_removed(adapter->hw.hw_addr)) { | |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { | |
| rtnl_lock(); | |
| ixgbe_down(adapter); | |
| rtnl_unlock(); | |
| } | |
| ixgbe_service_event_complete(adapter); | |
| return; | |
| } | |
| if (adapter->flags2 & IXGBE_FLAG2_UDP_TUN_REREG_NEEDED) { | |
| rtnl_lock(); | |
| adapter->flags2 &= ~IXGBE_FLAG2_UDP_TUN_REREG_NEEDED; | |
| udp_tunnel_get_rx_info(adapter->netdev); | |
| rtnl_unlock(); | |
| } | |
| ixgbe_reset_subtask(adapter); | |
| ixgbe_phy_interrupt_subtask(adapter); | |
| ixgbe_sfp_detection_subtask(adapter); | |
| ixgbe_sfp_link_config_subtask(adapter); | |
| ixgbe_check_overtemp_subtask(adapter); | |
| ixgbe_watchdog_subtask(adapter); | |
| ixgbe_fdir_reinit_subtask(adapter); | |
| ixgbe_check_hang_subtask(adapter); | |
| if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) { | |
| ixgbe_ptp_overflow_check(adapter); | |
| ixgbe_ptp_rx_hang(adapter); | |
| ixgbe_ptp_tx_hang(adapter); | |
| } | |
| ixgbe_service_event_complete(adapter); | |
| } | |
| static int ixgbe_tso(struct ixgbe_ring *tx_ring, | |
| struct ixgbe_tx_buffer *first, | |
| u8 *hdr_len) | |
| { | |
| u32 vlan_macip_lens, type_tucmd, mss_l4len_idx; | |
| struct sk_buff *skb = first->skb; | |
| union { | |
| struct iphdr *v4; | |
| struct ipv6hdr *v6; | |
| unsigned char *hdr; | |
| } ip; | |
| union { | |
| struct tcphdr *tcp; | |
| unsigned char *hdr; | |
| } l4; | |
| u32 paylen, l4_offset; | |
| int err; | |
| if (skb->ip_summed != CHECKSUM_PARTIAL) | |
| return 0; | |
| if (!skb_is_gso(skb)) | |
| return 0; | |
| err = skb_cow_head(skb, 0); | |
| if (err < 0) | |
| return err; | |
| if (eth_p_mpls(first->protocol)) | |
| ip.hdr = skb_inner_network_header(skb); | |
| else | |
| ip.hdr = skb_network_header(skb); | |
| l4.hdr = skb_checksum_start(skb); | |
| /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ | |
| type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP; | |
| /* initialize outer IP header fields */ | |
| if (ip.v4->version == 4) { | |
| unsigned char *csum_start = skb_checksum_start(skb); | |
| unsigned char *trans_start = ip.hdr + (ip.v4->ihl * 4); | |
| /* IP header will have to cancel out any data that | |
| * is not a part of the outer IP header | |
| */ | |
| ip.v4->check = csum_fold(csum_partial(trans_start, | |
| csum_start - trans_start, | |
| 0)); | |
| type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; | |
| ip.v4->tot_len = 0; | |
| first->tx_flags |= IXGBE_TX_FLAGS_TSO | | |
| IXGBE_TX_FLAGS_CSUM | | |
| IXGBE_TX_FLAGS_IPV4; | |
| } else { | |
| ip.v6->payload_len = 0; | |
| first->tx_flags |= IXGBE_TX_FLAGS_TSO | | |
| IXGBE_TX_FLAGS_CSUM; | |
| } | |
| /* determine offset of inner transport header */ | |
| l4_offset = l4.hdr - skb->data; | |
| /* compute length of segmentation header */ | |
| *hdr_len = (l4.tcp->doff * 4) + l4_offset; | |
| /* remove payload length from inner checksum */ | |
| paylen = skb->len - l4_offset; | |
| csum_replace_by_diff(&l4.tcp->check, htonl(paylen)); | |
| /* update gso size and bytecount with header size */ | |
| first->gso_segs = skb_shinfo(skb)->gso_segs; | |
| first->bytecount += (first->gso_segs - 1) * *hdr_len; | |
| /* mss_l4len_id: use 0 as index for TSO */ | |
| mss_l4len_idx = (*hdr_len - l4_offset) << IXGBE_ADVTXD_L4LEN_SHIFT; | |
| mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; | |
| /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ | |
| vlan_macip_lens = l4.hdr - ip.hdr; | |
| vlan_macip_lens |= (ip.hdr - skb->data) << IXGBE_ADVTXD_MACLEN_SHIFT; | |
| vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; | |
| ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, type_tucmd, | |
| mss_l4len_idx); | |
| return 1; | |
| } | |
| static inline bool ixgbe_ipv6_csum_is_sctp(struct sk_buff *skb) | |
| { | |
| unsigned int offset = 0; | |
| ipv6_find_hdr(skb, &offset, IPPROTO_SCTP, NULL, NULL); | |
| return offset == skb_checksum_start_offset(skb); | |
| } | |
| static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring, | |
| struct ixgbe_tx_buffer *first) | |
| { | |
| struct sk_buff *skb = first->skb; | |
| u32 vlan_macip_lens = 0; | |
| u32 type_tucmd = 0; | |
| if (skb->ip_summed != CHECKSUM_PARTIAL) { | |
| csum_failed: | |
| if (!(first->tx_flags & (IXGBE_TX_FLAGS_HW_VLAN | | |
| IXGBE_TX_FLAGS_CC))) | |
| return; | |
| goto no_csum; | |
| } | |
| switch (skb->csum_offset) { | |
| case offsetof(struct tcphdr, check): | |
| type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP; | |
| /* fall through */ | |
| case offsetof(struct udphdr, check): | |
| break; | |
| case offsetof(struct sctphdr, checksum): | |
| /* validate that this is actually an SCTP request */ | |
| if (((first->protocol == htons(ETH_P_IP)) && | |
| (ip_hdr(skb)->protocol == IPPROTO_SCTP)) || | |
| ((first->protocol == htons(ETH_P_IPV6)) && | |
| ixgbe_ipv6_csum_is_sctp(skb))) { | |
| type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_SCTP; | |
| break; | |
| } | |
| /* fall through */ | |
| default: | |
| skb_checksum_help(skb); | |
| goto csum_failed; | |
| } | |
| /* update TX checksum flag */ | |
| first->tx_flags |= IXGBE_TX_FLAGS_CSUM; | |
| vlan_macip_lens = skb_checksum_start_offset(skb) - | |
| skb_network_offset(skb); | |
| no_csum: | |
| /* vlan_macip_lens: MACLEN, VLAN tag */ | |
| vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT; | |
| vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; | |
| ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, type_tucmd, 0); | |
| } | |
| #define IXGBE_SET_FLAG(_input, _flag, _result) \ | |
| ((_flag <= _result) ? \ | |
| ((u32)(_input & _flag) * (_result / _flag)) : \ | |
| ((u32)(_input & _flag) / (_flag / _result))) | |
| static u32 ixgbe_tx_cmd_type(struct sk_buff *skb, u32 tx_flags) | |
| { | |
| /* set type for advanced descriptor with frame checksum insertion */ | |
| u32 cmd_type = IXGBE_ADVTXD_DTYP_DATA | | |
| IXGBE_ADVTXD_DCMD_DEXT | | |
| IXGBE_ADVTXD_DCMD_IFCS; | |
| /* set HW vlan bit if vlan is present */ | |
| cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_HW_VLAN, | |
| IXGBE_ADVTXD_DCMD_VLE); | |
| /* set segmentation enable bits for TSO/FSO */ | |
| cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSO, | |
| IXGBE_ADVTXD_DCMD_TSE); | |
| /* set timestamp bit if present */ | |
| cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSTAMP, | |
| IXGBE_ADVTXD_MAC_TSTAMP); | |
| /* insert frame checksum */ | |
| cmd_type ^= IXGBE_SET_FLAG(skb->no_fcs, 1, IXGBE_ADVTXD_DCMD_IFCS); | |
| return cmd_type; | |
| } | |
| static void ixgbe_tx_olinfo_status(union ixgbe_adv_tx_desc *tx_desc, | |
| u32 tx_flags, unsigned int paylen) | |
| { | |
| u32 olinfo_status = paylen << IXGBE_ADVTXD_PAYLEN_SHIFT; | |
| /* enable L4 checksum for TSO and TX checksum offload */ | |
| olinfo_status |= IXGBE_SET_FLAG(tx_flags, | |
| IXGBE_TX_FLAGS_CSUM, | |
| IXGBE_ADVTXD_POPTS_TXSM); | |
| /* enble IPv4 checksum for TSO */ | |
| olinfo_status |= IXGBE_SET_FLAG(tx_flags, | |
| IXGBE_TX_FLAGS_IPV4, | |
| IXGBE_ADVTXD_POPTS_IXSM); | |
| /* | |
| * Check Context must be set if Tx switch is enabled, which it | |
| * always is for case where virtual functions are running | |
| */ | |
| olinfo_status |= IXGBE_SET_FLAG(tx_flags, | |
| IXGBE_TX_FLAGS_CC, | |
| IXGBE_ADVTXD_CC); | |
| tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); | |
| } | |
| static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) | |
| { | |
| netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); | |
| /* Herbert's original patch had: | |
| * smp_mb__after_netif_stop_queue(); | |
| * but since that doesn't exist yet, just open code it. | |
| */ | |
| smp_mb(); | |
| /* We need to check again in a case another CPU has just | |
| * made room available. | |
| */ | |
| if (likely(ixgbe_desc_unused(tx_ring) < size)) | |
| return -EBUSY; | |
| /* A reprieve! - use start_queue because it doesn't call schedule */ | |
| netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index); | |
| ++tx_ring->tx_stats.restart_queue; | |
| return 0; | |
| } | |
| static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) | |
| { | |
| if (likely(ixgbe_desc_unused(tx_ring) >= size)) | |
| return 0; | |
| return __ixgbe_maybe_stop_tx(tx_ring, size); | |
| } | |
| #define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \ | |
| IXGBE_TXD_CMD_RS) | |
| static int ixgbe_tx_map(struct ixgbe_ring *tx_ring, | |
| struct ixgbe_tx_buffer *first, | |
| const u8 hdr_len) | |
| { | |
| struct sk_buff *skb = first->skb; | |
| struct ixgbe_tx_buffer *tx_buffer; | |
| union ixgbe_adv_tx_desc *tx_desc; | |
| struct skb_frag_struct *frag; | |
| dma_addr_t dma; | |
| unsigned int data_len, size; | |
| u32 tx_flags = first->tx_flags; | |
| u32 cmd_type = ixgbe_tx_cmd_type(skb, tx_flags); | |
| u16 i = tx_ring->next_to_use; | |
| tx_desc = IXGBE_TX_DESC(tx_ring, i); | |
| ixgbe_tx_olinfo_status(tx_desc, tx_flags, skb->len - hdr_len); | |
| size = skb_headlen(skb); | |
| data_len = skb->data_len; | |
| #ifdef IXGBE_FCOE | |
| if (tx_flags & IXGBE_TX_FLAGS_FCOE) { | |
| if (data_len < sizeof(struct fcoe_crc_eof)) { | |
| size -= sizeof(struct fcoe_crc_eof) - data_len; | |
| data_len = 0; | |
| } else { | |
| data_len -= sizeof(struct fcoe_crc_eof); | |
| } | |
| } | |
| #endif | |
| dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); | |
| tx_buffer = first; | |
| for (frag = &skb_shinfo(skb)->frags[0];; frag++) { | |
| if (dma_mapping_error(tx_ring->dev, dma)) | |
| goto dma_error; | |
| /* record length, and DMA address */ | |
| dma_unmap_len_set(tx_buffer, len, size); | |
| dma_unmap_addr_set(tx_buffer, dma, dma); | |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); | |
| while (unlikely(size > IXGBE_MAX_DATA_PER_TXD)) { | |
| tx_desc->read.cmd_type_len = | |
| cpu_to_le32(cmd_type ^ IXGBE_MAX_DATA_PER_TXD); | |
| i++; | |
| tx_desc++; | |
| if (i == tx_ring->count) { | |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); | |
| i = 0; | |
| } | |
| tx_desc->read.olinfo_status = 0; | |
| dma += IXGBE_MAX_DATA_PER_TXD; | |
| size -= IXGBE_MAX_DATA_PER_TXD; | |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); | |
| } | |
| if (likely(!data_len)) | |
| break; | |
| tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size); | |
| i++; | |
| tx_desc++; | |
| if (i == tx_ring->count) { | |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); | |
| i = 0; | |
| } | |
| tx_desc->read.olinfo_status = 0; | |
| #ifdef IXGBE_FCOE | |
| size = min_t(unsigned int, data_len, skb_frag_size(frag)); | |
| #else | |
| size = skb_frag_size(frag); | |
| #endif | |
| data_len -= size; | |
| dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size, | |
| DMA_TO_DEVICE); | |
| tx_buffer = &tx_ring->tx_buffer_info[i]; | |
| } | |
| /* write last descriptor with RS and EOP bits */ | |
| cmd_type |= size | IXGBE_TXD_CMD; | |
| tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); | |
| netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); | |
| /* set the timestamp */ | |
| first->time_stamp = jiffies; | |
| /* | |
| * Force memory writes to complete before letting h/w know there | |
| * are new descriptors to fetch. (Only applicable for weak-ordered | |
| * memory model archs, such as IA-64). | |
| * | |
| * We also need this memory barrier to make certain all of the | |
| * status bits have been updated before next_to_watch is written. | |
| */ | |
| wmb(); | |
| /* set next_to_watch value indicating a packet is present */ | |
| first->next_to_watch = tx_desc; | |
| i++; | |
| if (i == tx_ring->count) | |
| i = 0; | |
| tx_ring->next_to_use = i; | |
| ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED); | |
| if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) { | |
| writel(i, tx_ring->tail); | |
| /* we need this if more than one processor can write to our tail | |
| * at a time, it synchronizes IO on IA64/Altix systems | |
| */ | |
| mmiowb(); | |
| } | |
| return 0; | |
| dma_error: | |
| dev_err(tx_ring->dev, "TX DMA map failed\n"); | |
| /* clear dma mappings for failed tx_buffer_info map */ | |
| for (;;) { | |
| tx_buffer = &tx_ring->tx_buffer_info[i]; | |
| if (dma_unmap_len(tx_buffer, len)) | |
| dma_unmap_page(tx_ring->dev, | |
| dma_unmap_addr(tx_buffer, dma), | |
| dma_unmap_len(tx_buffer, len), | |
| DMA_TO_DEVICE); | |
| dma_unmap_len_set(tx_buffer, len, 0); | |
| if (tx_buffer == first) | |
| break; | |
| if (i == 0) | |
| i += tx_ring->count; | |
| i--; | |
| } | |
| dev_kfree_skb_any(first->skb); | |
| first->skb = NULL; | |
| tx_ring->next_to_use = i; | |
| return -1; | |
| } | |
| static void ixgbe_atr(struct ixgbe_ring *ring, | |
| struct ixgbe_tx_buffer *first) | |
| { | |
| struct ixgbe_q_vector *q_vector = ring->q_vector; | |
| union ixgbe_atr_hash_dword input = { .dword = 0 }; | |
| union ixgbe_atr_hash_dword common = { .dword = 0 }; | |
| union { | |
| unsigned char *network; | |
| struct iphdr *ipv4; | |
| struct ipv6hdr *ipv6; | |
| } hdr; | |
| struct tcphdr *th; | |
| unsigned int hlen; | |
| struct sk_buff *skb; | |
| __be16 vlan_id; | |
| int l4_proto; | |
| /* if ring doesn't have a interrupt vector, cannot perform ATR */ | |
| if (!q_vector) | |
| return; | |
| /* do nothing if sampling is disabled */ | |
| if (!ring->atr_sample_rate) | |
| return; | |
| ring->atr_count++; | |
| /* currently only IPv4/IPv6 with TCP is supported */ | |
| if ((first->protocol != htons(ETH_P_IP)) && | |
| (first->protocol != htons(ETH_P_IPV6))) | |
| return; | |
| /* snag network header to get L4 type and address */ | |
| skb = first->skb; | |
| hdr.network = skb_network_header(skb); | |
| if (unlikely(hdr.network <= skb->data)) | |
| return; | |
| if (skb->encapsulation && | |
| first->protocol == htons(ETH_P_IP) && | |
| hdr.ipv4->protocol == IPPROTO_UDP) { | |
| struct ixgbe_adapter *adapter = q_vector->adapter; | |
| if (unlikely(skb_tail_pointer(skb) < hdr.network + | |
| VXLAN_HEADROOM)) | |
| return; | |
| /* verify the port is recognized as VXLAN */ | |
| if (adapter->vxlan_port && | |
| udp_hdr(skb)->dest == adapter->vxlan_port) | |
| hdr.network = skb_inner_network_header(skb); | |
| if (adapter->geneve_port && | |
| udp_hdr(skb)->dest == adapter->geneve_port) | |
| hdr.network = skb_inner_network_header(skb); | |
| } | |
| /* Make sure we have at least [minimum IPv4 header + TCP] | |
| * or [IPv6 header] bytes | |
| */ | |
| if (unlikely(skb_tail_pointer(skb) < hdr.network + 40)) | |
| return; | |
| /* Currently only IPv4/IPv6 with TCP is supported */ | |
| switch (hdr.ipv4->version) { | |
| case IPVERSION: | |
| /* access ihl as u8 to avoid unaligned access on ia64 */ | |
| hlen = (hdr.network[0] & 0x0F) << 2; | |
| l4_proto = hdr.ipv4->protocol; | |
| break; | |
| case 6: | |
| hlen = hdr.network - skb->data; | |
| l4_proto = ipv6_find_hdr(skb, &hlen, IPPROTO_TCP, NULL, NULL); | |
| hlen -= hdr.network - skb->data; | |
| break; | |
| default: | |
| return; | |
| } | |
| if (l4_proto != IPPROTO_TCP) | |
| return; | |
| if (unlikely(skb_tail_pointer(skb) < hdr.network + | |
| hlen + sizeof(struct tcphdr))) | |
| return; | |
| th = (struct tcphdr *)(hdr.network + hlen); | |
| /* skip this packet since the socket is closing */ | |
| if (th->fin) | |
| return; | |
| /* sample on all syn packets or once every atr sample count */ | |
| if (!th->syn && (ring->atr_count < ring->atr_sample_rate)) | |
| return; | |
| /* reset sample count */ | |
| ring->atr_count = 0; | |
| vlan_id = htons(first->tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT); | |
| /* | |
| * src and dst are inverted, think how the receiver sees them | |
| * | |
| * The input is broken into two sections, a non-compressed section | |
| * containing vm_pool, vlan_id, and flow_type. The rest of the data | |
| * is XORed together and stored in the compressed dword. | |
| */ | |
| input.formatted.vlan_id = vlan_id; | |
| /* | |
| * since src port and flex bytes occupy the same word XOR them together | |
| * and write the value to source port portion of compressed dword | |
| */ | |
| if (first->tx_flags & (IXGBE_TX_FLAGS_SW_VLAN | IXGBE_TX_FLAGS_HW_VLAN)) | |
| common.port.src ^= th->dest ^ htons(ETH_P_8021Q); | |
| else | |
| common.port.src ^= th->dest ^ first->protocol; | |
| common.port.dst ^= th->source; | |
| switch (hdr.ipv4->version) { | |
| case IPVERSION: | |
| input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; | |
| common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr; | |
| break; | |
| case 6: | |
| input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV6; | |
| common.ip ^= hdr.ipv6->saddr.s6_addr32[0] ^ | |
| hdr.ipv6->saddr.s6_addr32[1] ^ | |
| hdr.ipv6->saddr.s6_addr32[2] ^ | |
| hdr.ipv6->saddr.s6_addr32[3] ^ | |
| hdr.ipv6->daddr.s6_addr32[0] ^ | |
| hdr.ipv6->daddr.s6_addr32[1] ^ | |
| hdr.ipv6->daddr.s6_addr32[2] ^ | |
| hdr.ipv6->daddr.s6_addr32[3]; | |
| break; | |
| default: | |
| break; | |
| } | |
| if (hdr.network != skb_network_header(skb)) | |
| input.formatted.flow_type |= IXGBE_ATR_L4TYPE_TUNNEL_MASK; | |
| /* This assumes the Rx queue and Tx queue are bound to the same CPU */ | |
| ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw, | |
| input, common, ring->queue_index); | |
| } | |
| static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb, | |
| void *accel_priv, select_queue_fallback_t fallback) | |
| { | |
| struct ixgbe_fwd_adapter *fwd_adapter = accel_priv; | |
| #ifdef IXGBE_FCOE | |
| struct ixgbe_adapter *adapter; | |
| struct ixgbe_ring_feature *f; | |
| int txq; | |
| #endif | |
| if (fwd_adapter) | |
| return skb->queue_mapping + fwd_adapter->tx_base_queue; | |
| #ifdef IXGBE_FCOE | |
| /* | |
| * only execute the code below if protocol is FCoE | |
| * or FIP and we have FCoE enabled on the adapter | |
| */ | |
| switch (vlan_get_protocol(skb)) { | |
| case htons(ETH_P_FCOE): | |
| case htons(ETH_P_FIP): | |
| adapter = netdev_priv(dev); | |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) | |
| break; | |
| /* fall through */ | |
| default: | |
| return fallback(dev, skb); | |
| } | |
| f = &adapter->ring_feature[RING_F_FCOE]; | |
| txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : | |
| smp_processor_id(); | |
| while (txq >= f->indices) | |
| txq -= f->indices; | |
| return txq + f->offset; | |
| #else | |
| return fallback(dev, skb); | |
| #endif | |
| } | |
| static int ixgbe_xmit_xdp_ring(struct ixgbe_adapter *adapter, | |
| struct xdp_buff *xdp) | |
| { | |
| struct ixgbe_ring *ring = adapter->xdp_ring[smp_processor_id()]; | |
| struct ixgbe_tx_buffer *tx_buffer; | |
| union ixgbe_adv_tx_desc *tx_desc; | |
| u32 len, cmd_type; | |
| dma_addr_t dma; | |
| u16 i; | |
| len = xdp->data_end - xdp->data; | |
| if (unlikely(!ixgbe_desc_unused(ring))) | |
| return IXGBE_XDP_CONSUMED; | |
| dma = dma_map_single(ring->dev, xdp->data, len, DMA_TO_DEVICE); | |
| if (dma_mapping_error(ring->dev, dma)) | |
| return IXGBE_XDP_CONSUMED; | |
| /* record the location of the first descriptor for this packet */ | |
| tx_buffer = &ring->tx_buffer_info[ring->next_to_use]; | |
| tx_buffer->bytecount = len; | |
| tx_buffer->gso_segs = 1; | |
| tx_buffer->protocol = 0; | |
| i = ring->next_to_use; | |
| tx_desc = IXGBE_TX_DESC(ring, i); | |
| dma_unmap_len_set(tx_buffer, len, len); | |
| dma_unmap_addr_set(tx_buffer, dma, dma); | |
| tx_buffer->data = xdp->data; | |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); | |
| /* put descriptor type bits */ | |
| cmd_type = IXGBE_ADVTXD_DTYP_DATA | | |
| IXGBE_ADVTXD_DCMD_DEXT | | |
| IXGBE_ADVTXD_DCMD_IFCS; | |
| cmd_type |= len | IXGBE_TXD_CMD; | |
| tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); | |
| tx_desc->read.olinfo_status = | |
| cpu_to_le32(len << IXGBE_ADVTXD_PAYLEN_SHIFT); | |
| /* Avoid any potential race with xdp_xmit and cleanup */ | |
| smp_wmb(); | |
| /* set next_to_watch value indicating a packet is present */ | |
| i++; | |
| if (i == ring->count) | |
| i = 0; | |
| tx_buffer->next_to_watch = tx_desc; | |
| ring->next_to_use = i; | |
| return IXGBE_XDP_TX; | |
| } | |
| netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, | |
| struct ixgbe_adapter *adapter, | |
| struct ixgbe_ring *tx_ring) | |
| { | |
| struct ixgbe_tx_buffer *first; | |
| int tso; | |
| u32 tx_flags = 0; | |
| unsigned short f; | |
| u16 count = TXD_USE_COUNT(skb_headlen(skb)); | |
| __be16 protocol = skb->protocol; | |
| u8 hdr_len = 0; | |
| /* | |
| * need: 1 descriptor per page * PAGE_SIZE/IXGBE_MAX_DATA_PER_TXD, | |
| * + 1 desc for skb_headlen/IXGBE_MAX_DATA_PER_TXD, | |
| * + 2 desc gap to keep tail from touching head, | |
| * + 1 desc for context descriptor, | |
| * otherwise try next time | |
| */ | |
| for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) | |
| count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); | |
| if (ixgbe_maybe_stop_tx(tx_ring, count + 3)) { | |
| tx_ring->tx_stats.tx_busy++; | |
| return NETDEV_TX_BUSY; | |
| } | |
| /* record the location of the first descriptor for this packet */ | |
| first = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; | |
| first->skb = skb; | |
| first->bytecount = skb->len; | |
| first->gso_segs = 1; | |
| /* if we have a HW VLAN tag being added default to the HW one */ | |
| if (skb_vlan_tag_present(skb)) { | |
| tx_flags |= skb_vlan_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT; | |
| tx_flags |= IXGBE_TX_FLAGS_HW_VLAN; | |
| /* else if it is a SW VLAN check the next protocol and store the tag */ | |
| } else if (protocol == htons(ETH_P_8021Q)) { | |
| struct vlan_hdr *vhdr, _vhdr; | |
| vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr); | |
| if (!vhdr) | |
| goto out_drop; | |
| tx_flags |= ntohs(vhdr->h_vlan_TCI) << | |
| IXGBE_TX_FLAGS_VLAN_SHIFT; | |
| tx_flags |= IXGBE_TX_FLAGS_SW_VLAN; | |
| } | |
| protocol = vlan_get_protocol(skb); | |
| if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && | |
| adapter->ptp_clock) { | |
| if (!test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS, | |
| &adapter->state)) { | |
| skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; | |
| tx_flags |= IXGBE_TX_FLAGS_TSTAMP; | |
| /* schedule check for Tx timestamp */ | |
| adapter->ptp_tx_skb = skb_get(skb); | |
| adapter->ptp_tx_start = jiffies; | |
| schedule_work(&adapter->ptp_tx_work); | |
| } else { | |
| adapter->tx_hwtstamp_skipped++; | |
| } | |
| } | |
| skb_tx_timestamp(skb); | |
| #ifdef CONFIG_PCI_IOV | |
| /* | |
| * Use the l2switch_enable flag - would be false if the DMA | |
| * Tx switch had been disabled. | |
| */ | |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) | |
| tx_flags |= IXGBE_TX_FLAGS_CC; | |
| #endif | |
| /* DCB maps skb priorities 0-7 onto 3 bit PCP of VLAN tag. */ | |
| if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && | |
| ((tx_flags & (IXGBE_TX_FLAGS_HW_VLAN | IXGBE_TX_FLAGS_SW_VLAN)) || | |
| (skb->priority != TC_PRIO_CONTROL))) { | |
| tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK; | |
| tx_flags |= (skb->priority & 0x7) << | |
| IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT; | |
| if (tx_flags & IXGBE_TX_FLAGS_SW_VLAN) { | |
| struct vlan_ethhdr *vhdr; | |
| if (skb_cow_head(skb, 0)) | |
| goto out_drop; | |
| vhdr = (struct vlan_ethhdr *)skb->data; | |
| vhdr->h_vlan_TCI = htons(tx_flags >> | |
| IXGBE_TX_FLAGS_VLAN_SHIFT); | |
| } else { | |
| tx_flags |= IXGBE_TX_FLAGS_HW_VLAN; | |
| } | |
| } | |
| /* record initial flags and protocol */ | |
| first->tx_flags = tx_flags; | |
| first->protocol = protocol; | |
| #ifdef IXGBE_FCOE | |
| /* setup tx offload for FCoE */ | |
| if ((protocol == htons(ETH_P_FCOE)) && | |
| (tx_ring->netdev->features & (NETIF_F_FSO | NETIF_F_FCOE_CRC))) { | |
| tso = ixgbe_fso(tx_ring, first, &hdr_len); | |
| if (tso < 0) | |
| goto out_drop; | |
| goto xmit_fcoe; | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| tso = ixgbe_tso(tx_ring, first, &hdr_len); | |
| if (tso < 0) | |
| goto out_drop; | |
| else if (!tso) | |
| ixgbe_tx_csum(tx_ring, first); | |
| /* add the ATR filter if ATR is on */ | |
| if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state)) | |
| ixgbe_atr(tx_ring, first); | |
| #ifdef IXGBE_FCOE | |
| xmit_fcoe: | |
| #endif /* IXGBE_FCOE */ | |
| if (ixgbe_tx_map(tx_ring, first, hdr_len)) | |
| goto cleanup_tx_timestamp; | |
| return NETDEV_TX_OK; | |
| out_drop: | |
| dev_kfree_skb_any(first->skb); | |
| first->skb = NULL; | |
| cleanup_tx_timestamp: | |
| if (unlikely(tx_flags & IXGBE_TX_FLAGS_TSTAMP)) { | |
| dev_kfree_skb_any(adapter->ptp_tx_skb); | |
| adapter->ptp_tx_skb = NULL; | |
| cancel_work_sync(&adapter->ptp_tx_work); | |
| clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state); | |
| } | |
| return NETDEV_TX_OK; | |
| } | |
| static netdev_tx_t __ixgbe_xmit_frame(struct sk_buff *skb, | |
| struct net_device *netdev, | |
| struct ixgbe_ring *ring) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_ring *tx_ring; | |
| /* | |
| * The minimum packet size for olinfo paylen is 17 so pad the skb | |
| * in order to meet this minimum size requirement. | |
| */ | |
| if (skb_put_padto(skb, 17)) | |
| return NETDEV_TX_OK; | |
| tx_ring = ring ? ring : adapter->tx_ring[skb->queue_mapping]; | |
| return ixgbe_xmit_frame_ring(skb, adapter, tx_ring); | |
| } | |
| static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb, | |
| struct net_device *netdev) | |
| { | |
| return __ixgbe_xmit_frame(skb, netdev, NULL); | |
| } | |
| /** | |
| * ixgbe_set_mac - Change the Ethernet Address of the NIC | |
| * @netdev: network interface device structure | |
| * @p: pointer to an address structure | |
| * | |
| * Returns 0 on success, negative on failure | |
| **/ | |
| static int ixgbe_set_mac(struct net_device *netdev, void *p) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct sockaddr *addr = p; | |
| if (!is_valid_ether_addr(addr->sa_data)) | |
| return -EADDRNOTAVAIL; | |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | |
| memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); | |
| ixgbe_mac_set_default_filter(adapter); | |
| return 0; | |
| } | |
| static int | |
| ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u16 value; | |
| int rc; | |
| if (prtad != hw->phy.mdio.prtad) | |
| return -EINVAL; | |
| rc = hw->phy.ops.read_reg(hw, addr, devad, &value); | |
| if (!rc) | |
| rc = value; | |
| return rc; | |
| } | |
| static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad, | |
| u16 addr, u16 value) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| if (prtad != hw->phy.mdio.prtad) | |
| return -EINVAL; | |
| return hw->phy.ops.write_reg(hw, addr, devad, value); | |
| } | |
| static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| switch (cmd) { | |
| case SIOCSHWTSTAMP: | |
| return ixgbe_ptp_set_ts_config(adapter, req); | |
| case SIOCGHWTSTAMP: | |
| return ixgbe_ptp_get_ts_config(adapter, req); | |
| case SIOCGMIIPHY: | |
| if (!adapter->hw.phy.ops.read_reg) | |
| return -EOPNOTSUPP; | |
| /* fall through */ | |
| default: | |
| return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd); | |
| } | |
| } | |
| /** | |
| * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding | |
| * netdev->dev_addrs | |
| * @netdev: network interface device structure | |
| * | |
| * Returns non-zero on failure | |
| **/ | |
| static int ixgbe_add_sanmac_netdev(struct net_device *dev) | |
| { | |
| int err = 0; | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| if (is_valid_ether_addr(hw->mac.san_addr)) { | |
| rtnl_lock(); | |
| err = dev_addr_add(dev, hw->mac.san_addr, NETDEV_HW_ADDR_T_SAN); | |
| rtnl_unlock(); | |
| /* update SAN MAC vmdq pool selection */ | |
| hw->mac.ops.set_vmdq_san_mac(hw, VMDQ_P(0)); | |
| } | |
| return err; | |
| } | |
| /** | |
| * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding | |
| * netdev->dev_addrs | |
| * @netdev: network interface device structure | |
| * | |
| * Returns non-zero on failure | |
| **/ | |
| static int ixgbe_del_sanmac_netdev(struct net_device *dev) | |
| { | |
| int err = 0; | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| struct ixgbe_mac_info *mac = &adapter->hw.mac; | |
| if (is_valid_ether_addr(mac->san_addr)) { | |
| rtnl_lock(); | |
| err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN); | |
| rtnl_unlock(); | |
| } | |
| return err; | |
| } | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| /* | |
| * Polling 'interrupt' - used by things like netconsole to send skbs | |
| * without having to re-enable interrupts. It's not called while | |
| * the interrupt routine is executing. | |
| */ | |
| static void ixgbe_netpoll(struct net_device *netdev) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| int i; | |
| /* if interface is down do nothing */ | |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) | |
| return; | |
| /* loop through and schedule all active queues */ | |
| for (i = 0; i < adapter->num_q_vectors; i++) | |
| ixgbe_msix_clean_rings(0, adapter->q_vector[i]); | |
| } | |
| #endif | |
| static void ixgbe_get_ring_stats64(struct rtnl_link_stats64 *stats, | |
| struct ixgbe_ring *ring) | |
| { | |
| u64 bytes, packets; | |
| unsigned int start; | |
| if (ring) { | |
| do { | |
| start = u64_stats_fetch_begin_irq(&ring->syncp); | |
| packets = ring->stats.packets; | |
| bytes = ring->stats.bytes; | |
| } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); | |
| stats->tx_packets += packets; | |
| stats->tx_bytes += bytes; | |
| } | |
| } | |
| static void ixgbe_get_stats64(struct net_device *netdev, | |
| struct rtnl_link_stats64 *stats) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| int i; | |
| rcu_read_lock(); | |
| for (i = 0; i < adapter->num_rx_queues; i++) { | |
| struct ixgbe_ring *ring = READ_ONCE(adapter->rx_ring[i]); | |
| u64 bytes, packets; | |
| unsigned int start; | |
| if (ring) { | |
| do { | |
| start = u64_stats_fetch_begin_irq(&ring->syncp); | |
| packets = ring->stats.packets; | |
| bytes = ring->stats.bytes; | |
| } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); | |
| stats->rx_packets += packets; | |
| stats->rx_bytes += bytes; | |
| } | |
| } | |
| for (i = 0; i < adapter->num_tx_queues; i++) { | |
| struct ixgbe_ring *ring = READ_ONCE(adapter->tx_ring[i]); | |
| ixgbe_get_ring_stats64(stats, ring); | |
| } | |
| for (i = 0; i < adapter->num_xdp_queues; i++) { | |
| struct ixgbe_ring *ring = READ_ONCE(adapter->xdp_ring[i]); | |
| ixgbe_get_ring_stats64(stats, ring); | |
| } | |
| rcu_read_unlock(); | |
| /* following stats updated by ixgbe_watchdog_task() */ | |
| stats->multicast = netdev->stats.multicast; | |
| stats->rx_errors = netdev->stats.rx_errors; | |
| stats->rx_length_errors = netdev->stats.rx_length_errors; | |
| stats->rx_crc_errors = netdev->stats.rx_crc_errors; | |
| stats->rx_missed_errors = netdev->stats.rx_missed_errors; | |
| } | |
| #ifdef CONFIG_IXGBE_DCB | |
| /** | |
| * ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid. | |
| * @adapter: pointer to ixgbe_adapter | |
| * @tc: number of traffic classes currently enabled | |
| * | |
| * Configure a valid 802.1Qp to Rx packet buffer mapping ie confirm | |
| * 802.1Q priority maps to a packet buffer that exists. | |
| */ | |
| static void ixgbe_validate_rtr(struct ixgbe_adapter *adapter, u8 tc) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u32 reg, rsave; | |
| int i; | |
| /* 82598 have a static priority to TC mapping that can not | |
| * be changed so no validation is needed. | |
| */ | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| return; | |
| reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC); | |
| rsave = reg; | |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { | |
| u8 up2tc = reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT); | |
| /* If up2tc is out of bounds default to zero */ | |
| if (up2tc > tc) | |
| reg &= ~(0x7 << IXGBE_RTRUP2TC_UP_SHIFT); | |
| } | |
| if (reg != rsave) | |
| IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg); | |
| return; | |
| } | |
| /** | |
| * ixgbe_set_prio_tc_map - Configure netdev prio tc map | |
| * @adapter: Pointer to adapter struct | |
| * | |
| * Populate the netdev user priority to tc map | |
| */ | |
| static void ixgbe_set_prio_tc_map(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *dev = adapter->netdev; | |
| struct ixgbe_dcb_config *dcb_cfg = &adapter->dcb_cfg; | |
| struct ieee_ets *ets = adapter->ixgbe_ieee_ets; | |
| u8 prio; | |
| for (prio = 0; prio < MAX_USER_PRIORITY; prio++) { | |
| u8 tc = 0; | |
| if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) | |
| tc = ixgbe_dcb_get_tc_from_up(dcb_cfg, 0, prio); | |
| else if (ets) | |
| tc = ets->prio_tc[prio]; | |
| netdev_set_prio_tc_map(dev, prio, tc); | |
| } | |
| } | |
| #endif /* CONFIG_IXGBE_DCB */ | |
| /** | |
| * ixgbe_setup_tc - configure net_device for multiple traffic classes | |
| * | |
| * @netdev: net device to configure | |
| * @tc: number of traffic classes to enable | |
| */ | |
| int ixgbe_setup_tc(struct net_device *dev, u8 tc) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| bool pools; | |
| /* Hardware supports up to 8 traffic classes */ | |
| if (tc > adapter->dcb_cfg.num_tcs.pg_tcs) | |
| return -EINVAL; | |
| if (hw->mac.type == ixgbe_mac_82598EB && tc && tc < MAX_TRAFFIC_CLASS) | |
| return -EINVAL; | |
| pools = (find_first_zero_bit(&adapter->fwd_bitmask, 32) > 1); | |
| if (tc && pools && adapter->num_rx_pools > IXGBE_MAX_DCBMACVLANS) | |
| return -EBUSY; | |
| /* Hardware has to reinitialize queues and interrupts to | |
| * match packet buffer alignment. Unfortunately, the | |
| * hardware is not flexible enough to do this dynamically. | |
| */ | |
| if (netif_running(dev)) | |
| ixgbe_close(dev); | |
| else | |
| ixgbe_reset(adapter); | |
| ixgbe_clear_interrupt_scheme(adapter); | |
| #ifdef CONFIG_IXGBE_DCB | |
| if (tc) { | |
| netdev_set_num_tc(dev, tc); | |
| ixgbe_set_prio_tc_map(adapter); | |
| adapter->flags |= IXGBE_FLAG_DCB_ENABLED; | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) { | |
| adapter->last_lfc_mode = adapter->hw.fc.requested_mode; | |
| adapter->hw.fc.requested_mode = ixgbe_fc_none; | |
| } | |
| } else { | |
| netdev_reset_tc(dev); | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) | |
| adapter->hw.fc.requested_mode = adapter->last_lfc_mode; | |
| adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; | |
| adapter->temp_dcb_cfg.pfc_mode_enable = false; | |
| adapter->dcb_cfg.pfc_mode_enable = false; | |
| } | |
| ixgbe_validate_rtr(adapter, tc); | |
| #endif /* CONFIG_IXGBE_DCB */ | |
| ixgbe_init_interrupt_scheme(adapter); | |
| if (netif_running(dev)) | |
| return ixgbe_open(dev); | |
| return 0; | |
| } | |
| static int ixgbe_delete_clsu32(struct ixgbe_adapter *adapter, | |
| struct tc_cls_u32_offload *cls) | |
| { | |
| u32 hdl = cls->knode.handle; | |
| u32 uhtid = TC_U32_USERHTID(cls->knode.handle); | |
| u32 loc = cls->knode.handle & 0xfffff; | |
| int err = 0, i, j; | |
| struct ixgbe_jump_table *jump = NULL; | |
| if (loc > IXGBE_MAX_HW_ENTRIES) | |
| return -EINVAL; | |
| if ((uhtid != 0x800) && (uhtid >= IXGBE_MAX_LINK_HANDLE)) | |
| return -EINVAL; | |
| /* Clear this filter in the link data it is associated with */ | |
| if (uhtid != 0x800) { | |
| jump = adapter->jump_tables[uhtid]; | |
| if (!jump) | |
| return -EINVAL; | |
| if (!test_bit(loc - 1, jump->child_loc_map)) | |
| return -EINVAL; | |
| clear_bit(loc - 1, jump->child_loc_map); | |
| } | |
| /* Check if the filter being deleted is a link */ | |
| for (i = 1; i < IXGBE_MAX_LINK_HANDLE; i++) { | |
| jump = adapter->jump_tables[i]; | |
| if (jump && jump->link_hdl == hdl) { | |
| /* Delete filters in the hardware in the child hash | |
| * table associated with this link | |
| */ | |
| for (j = 0; j < IXGBE_MAX_HW_ENTRIES; j++) { | |
| if (!test_bit(j, jump->child_loc_map)) | |
| continue; | |
| spin_lock(&adapter->fdir_perfect_lock); | |
| err = ixgbe_update_ethtool_fdir_entry(adapter, | |
| NULL, | |
| j + 1); | |
| spin_unlock(&adapter->fdir_perfect_lock); | |
| clear_bit(j, jump->child_loc_map); | |
| } | |
| /* Remove resources for this link */ | |
| kfree(jump->input); | |
| kfree(jump->mask); | |
| kfree(jump); | |
| adapter->jump_tables[i] = NULL; | |
| return err; | |
| } | |
| } | |
| spin_lock(&adapter->fdir_perfect_lock); | |
| err = ixgbe_update_ethtool_fdir_entry(adapter, NULL, loc); | |
| spin_unlock(&adapter->fdir_perfect_lock); | |
| return err; | |
| } | |
| static int ixgbe_configure_clsu32_add_hnode(struct ixgbe_adapter *adapter, | |
| struct tc_cls_u32_offload *cls) | |
| { | |
| u32 uhtid = TC_U32_USERHTID(cls->hnode.handle); | |
| if (uhtid >= IXGBE_MAX_LINK_HANDLE) | |
| return -EINVAL; | |
| /* This ixgbe devices do not support hash tables at the moment | |
| * so abort when given hash tables. | |
| */ | |
| if (cls->hnode.divisor > 0) | |
| return -EINVAL; | |
| set_bit(uhtid - 1, &adapter->tables); | |
| return 0; | |
| } | |
| static int ixgbe_configure_clsu32_del_hnode(struct ixgbe_adapter *adapter, | |
| struct tc_cls_u32_offload *cls) | |
| { | |
| u32 uhtid = TC_U32_USERHTID(cls->hnode.handle); | |
| if (uhtid >= IXGBE_MAX_LINK_HANDLE) | |
| return -EINVAL; | |
| clear_bit(uhtid - 1, &adapter->tables); | |
| return 0; | |
| } | |
| #ifdef CONFIG_NET_CLS_ACT | |
| struct upper_walk_data { | |
| struct ixgbe_adapter *adapter; | |
| u64 action; | |
| int ifindex; | |
| u8 queue; | |
| }; | |
| static int get_macvlan_queue(struct net_device *upper, void *_data) | |
| { | |
| if (netif_is_macvlan(upper)) { | |
| struct macvlan_dev *dfwd = netdev_priv(upper); | |
| struct ixgbe_fwd_adapter *vadapter = dfwd->fwd_priv; | |
| struct upper_walk_data *data = _data; | |
| struct ixgbe_adapter *adapter = data->adapter; | |
| int ifindex = data->ifindex; | |
| if (vadapter && vadapter->netdev->ifindex == ifindex) { | |
| data->queue = adapter->rx_ring[vadapter->rx_base_queue]->reg_idx; | |
| data->action = data->queue; | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int handle_redirect_action(struct ixgbe_adapter *adapter, int ifindex, | |
| u8 *queue, u64 *action) | |
| { | |
| unsigned int num_vfs = adapter->num_vfs, vf; | |
| struct upper_walk_data data; | |
| struct net_device *upper; | |
| /* redirect to a SRIOV VF */ | |
| for (vf = 0; vf < num_vfs; ++vf) { | |
| upper = pci_get_drvdata(adapter->vfinfo[vf].vfdev); | |
| if (upper->ifindex == ifindex) { | |
| if (adapter->num_rx_pools > 1) | |
| *queue = vf * 2; | |
| else | |
| *queue = vf * adapter->num_rx_queues_per_pool; | |
| *action = vf + 1; | |
| *action <<= ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF; | |
| return 0; | |
| } | |
| } | |
| /* redirect to a offloaded macvlan netdev */ | |
| data.adapter = adapter; | |
| data.ifindex = ifindex; | |
| data.action = 0; | |
| data.queue = 0; | |
| if (netdev_walk_all_upper_dev_rcu(adapter->netdev, | |
| get_macvlan_queue, &data)) { | |
| *action = data.action; | |
| *queue = data.queue; | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| static int parse_tc_actions(struct ixgbe_adapter *adapter, | |
| struct tcf_exts *exts, u64 *action, u8 *queue) | |
| { | |
| const struct tc_action *a; | |
| LIST_HEAD(actions); | |
| int err; | |
| if (!tcf_exts_has_actions(exts)) | |
| return -EINVAL; | |
| tcf_exts_to_list(exts, &actions); | |
| list_for_each_entry(a, &actions, list) { | |
| /* Drop action */ | |
| if (is_tcf_gact_shot(a)) { | |
| *action = IXGBE_FDIR_DROP_QUEUE; | |
| *queue = IXGBE_FDIR_DROP_QUEUE; | |
| return 0; | |
| } | |
| /* Redirect to a VF or a offloaded macvlan */ | |
| if (is_tcf_mirred_egress_redirect(a)) { | |
| int ifindex = tcf_mirred_ifindex(a); | |
| err = handle_redirect_action(adapter, ifindex, queue, | |
| action); | |
| if (err == 0) | |
| return err; | |
| } | |
| } | |
| return -EINVAL; | |
| } | |
| #else | |
| static int parse_tc_actions(struct ixgbe_adapter *adapter, | |
| struct tcf_exts *exts, u64 *action, u8 *queue) | |
| { | |
| return -EINVAL; | |
| } | |
| #endif /* CONFIG_NET_CLS_ACT */ | |
| static int ixgbe_clsu32_build_input(struct ixgbe_fdir_filter *input, | |
| union ixgbe_atr_input *mask, | |
| struct tc_cls_u32_offload *cls, | |
| struct ixgbe_mat_field *field_ptr, | |
| struct ixgbe_nexthdr *nexthdr) | |
| { | |
| int i, j, off; | |
| __be32 val, m; | |
| bool found_entry = false, found_jump_field = false; | |
| for (i = 0; i < cls->knode.sel->nkeys; i++) { | |
| off = cls->knode.sel->keys[i].off; | |
| val = cls->knode.sel->keys[i].val; | |
| m = cls->knode.sel->keys[i].mask; | |
| for (j = 0; field_ptr[j].val; j++) { | |
| if (field_ptr[j].off == off) { | |
| field_ptr[j].val(input, mask, val, m); | |
| input->filter.formatted.flow_type |= | |
| field_ptr[j].type; | |
| found_entry = true; | |
| break; | |
| } | |
| } | |
| if (nexthdr) { | |
| if (nexthdr->off == cls->knode.sel->keys[i].off && | |
| nexthdr->val == cls->knode.sel->keys[i].val && | |
| nexthdr->mask == cls->knode.sel->keys[i].mask) | |
| found_jump_field = true; | |
| else | |
| continue; | |
| } | |
| } | |
| if (nexthdr && !found_jump_field) | |
| return -EINVAL; | |
| if (!found_entry) | |
| return 0; | |
| mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK | | |
| IXGBE_ATR_L4TYPE_MASK; | |
| if (input->filter.formatted.flow_type == IXGBE_ATR_FLOW_TYPE_IPV4) | |
| mask->formatted.flow_type &= IXGBE_ATR_L4TYPE_IPV6_MASK; | |
| return 0; | |
| } | |
| static int ixgbe_configure_clsu32(struct ixgbe_adapter *adapter, | |
| struct tc_cls_u32_offload *cls) | |
| { | |
| __be16 protocol = cls->common.protocol; | |
| u32 loc = cls->knode.handle & 0xfffff; | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct ixgbe_mat_field *field_ptr; | |
| struct ixgbe_fdir_filter *input = NULL; | |
| union ixgbe_atr_input *mask = NULL; | |
| struct ixgbe_jump_table *jump = NULL; | |
| int i, err = -EINVAL; | |
| u8 queue; | |
| u32 uhtid, link_uhtid; | |
| uhtid = TC_U32_USERHTID(cls->knode.handle); | |
| link_uhtid = TC_U32_USERHTID(cls->knode.link_handle); | |
| /* At the moment cls_u32 jumps to network layer and skips past | |
| * L2 headers. The canonical method to match L2 frames is to use | |
| * negative values. However this is error prone at best but really | |
| * just broken because there is no way to "know" what sort of hdr | |
| * is in front of the network layer. Fix cls_u32 to support L2 | |
| * headers when needed. | |
| */ | |
| if (protocol != htons(ETH_P_IP)) | |
| return err; | |
| if (loc >= ((1024 << adapter->fdir_pballoc) - 2)) { | |
| e_err(drv, "Location out of range\n"); | |
| return err; | |
| } | |
| /* cls u32 is a graph starting at root node 0x800. The driver tracks | |
| * links and also the fields used to advance the parser across each | |
| * link (e.g. nexthdr/eat parameters from 'tc'). This way we can map | |
| * the u32 graph onto the hardware parse graph denoted in ixgbe_model.h | |
| * To add support for new nodes update ixgbe_model.h parse structures | |
| * this function _should_ be generic try not to hardcode values here. | |
| */ | |
| if (uhtid == 0x800) { | |
| field_ptr = (adapter->jump_tables[0])->mat; | |
| } else { | |
| if (uhtid >= IXGBE_MAX_LINK_HANDLE) | |
| return err; | |
| if (!adapter->jump_tables[uhtid]) | |
| return err; | |
| field_ptr = (adapter->jump_tables[uhtid])->mat; | |
| } | |
| if (!field_ptr) | |
| return err; | |
| /* At this point we know the field_ptr is valid and need to either | |
| * build cls_u32 link or attach filter. Because adding a link to | |
| * a handle that does not exist is invalid and the same for adding | |
| * rules to handles that don't exist. | |
| */ | |
| if (link_uhtid) { | |
| struct ixgbe_nexthdr *nexthdr = ixgbe_ipv4_jumps; | |
| if (link_uhtid >= IXGBE_MAX_LINK_HANDLE) | |
| return err; | |
| if (!test_bit(link_uhtid - 1, &adapter->tables)) | |
| return err; | |
| /* Multiple filters as links to the same hash table are not | |
| * supported. To add a new filter with the same next header | |
| * but different match/jump conditions, create a new hash table | |
| * and link to it. | |
| */ | |
| if (adapter->jump_tables[link_uhtid] && | |
| (adapter->jump_tables[link_uhtid])->link_hdl) { | |
| e_err(drv, "Link filter exists for link: %x\n", | |
| link_uhtid); | |
| return err; | |
| } | |
| for (i = 0; nexthdr[i].jump; i++) { | |
| if (nexthdr[i].o != cls->knode.sel->offoff || | |
| nexthdr[i].s != cls->knode.sel->offshift || | |
| nexthdr[i].m != cls->knode.sel->offmask) | |
| return err; | |
| jump = kzalloc(sizeof(*jump), GFP_KERNEL); | |
| if (!jump) | |
| return -ENOMEM; | |
| input = kzalloc(sizeof(*input), GFP_KERNEL); | |
| if (!input) { | |
| err = -ENOMEM; | |
| goto free_jump; | |
| } | |
| mask = kzalloc(sizeof(*mask), GFP_KERNEL); | |
| if (!mask) { | |
| err = -ENOMEM; | |
| goto free_input; | |
| } | |
| jump->input = input; | |
| jump->mask = mask; | |
| jump->link_hdl = cls->knode.handle; | |
| err = ixgbe_clsu32_build_input(input, mask, cls, | |
| field_ptr, &nexthdr[i]); | |
| if (!err) { | |
| jump->mat = nexthdr[i].jump; | |
| adapter->jump_tables[link_uhtid] = jump; | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| input = kzalloc(sizeof(*input), GFP_KERNEL); | |
| if (!input) | |
| return -ENOMEM; | |
| mask = kzalloc(sizeof(*mask), GFP_KERNEL); | |
| if (!mask) { | |
| err = -ENOMEM; | |
| goto free_input; | |
| } | |
| if ((uhtid != 0x800) && (adapter->jump_tables[uhtid])) { | |
| if ((adapter->jump_tables[uhtid])->input) | |
| memcpy(input, (adapter->jump_tables[uhtid])->input, | |
| sizeof(*input)); | |
| if ((adapter->jump_tables[uhtid])->mask) | |
| memcpy(mask, (adapter->jump_tables[uhtid])->mask, | |
| sizeof(*mask)); | |
| /* Lookup in all child hash tables if this location is already | |
| * filled with a filter | |
| */ | |
| for (i = 1; i < IXGBE_MAX_LINK_HANDLE; i++) { | |
| struct ixgbe_jump_table *link = adapter->jump_tables[i]; | |
| if (link && (test_bit(loc - 1, link->child_loc_map))) { | |
| e_err(drv, "Filter exists in location: %x\n", | |
| loc); | |
| err = -EINVAL; | |
| goto err_out; | |
| } | |
| } | |
| } | |
| err = ixgbe_clsu32_build_input(input, mask, cls, field_ptr, NULL); | |
| if (err) | |
| goto err_out; | |
| err = parse_tc_actions(adapter, cls->knode.exts, &input->action, | |
| &queue); | |
| if (err < 0) | |
| goto err_out; | |
| input->sw_idx = loc; | |
| spin_lock(&adapter->fdir_perfect_lock); | |
| if (hlist_empty(&adapter->fdir_filter_list)) { | |
| memcpy(&adapter->fdir_mask, mask, sizeof(*mask)); | |
| err = ixgbe_fdir_set_input_mask_82599(hw, mask); | |
| if (err) | |
| goto err_out_w_lock; | |
| } else if (memcmp(&adapter->fdir_mask, mask, sizeof(*mask))) { | |
| err = -EINVAL; | |
| goto err_out_w_lock; | |
| } | |
| ixgbe_atr_compute_perfect_hash_82599(&input->filter, mask); | |
| err = ixgbe_fdir_write_perfect_filter_82599(hw, &input->filter, | |
| input->sw_idx, queue); | |
| if (!err) | |
| ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx); | |
| spin_unlock(&adapter->fdir_perfect_lock); | |
| if ((uhtid != 0x800) && (adapter->jump_tables[uhtid])) | |
| set_bit(loc - 1, (adapter->jump_tables[uhtid])->child_loc_map); | |
| kfree(mask); | |
| return err; | |
| err_out_w_lock: | |
| spin_unlock(&adapter->fdir_perfect_lock); | |
| err_out: | |
| kfree(mask); | |
| free_input: | |
| kfree(input); | |
| free_jump: | |
| kfree(jump); | |
| return err; | |
| } | |
| static int ixgbe_setup_tc_cls_u32(struct ixgbe_adapter *adapter, | |
| struct tc_cls_u32_offload *cls_u32) | |
| { | |
| if (cls_u32->common.chain_index) | |
| return -EOPNOTSUPP; | |
| switch (cls_u32->command) { | |
| case TC_CLSU32_NEW_KNODE: | |
| case TC_CLSU32_REPLACE_KNODE: | |
| return ixgbe_configure_clsu32(adapter, cls_u32); | |
| case TC_CLSU32_DELETE_KNODE: | |
| return ixgbe_delete_clsu32(adapter, cls_u32); | |
| case TC_CLSU32_NEW_HNODE: | |
| case TC_CLSU32_REPLACE_HNODE: | |
| return ixgbe_configure_clsu32_add_hnode(adapter, cls_u32); | |
| case TC_CLSU32_DELETE_HNODE: | |
| return ixgbe_configure_clsu32_del_hnode(adapter, cls_u32); | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| static int ixgbe_setup_tc_block_cb(enum tc_setup_type type, void *type_data, | |
| void *cb_priv) | |
| { | |
| struct ixgbe_adapter *adapter = cb_priv; | |
| if (!tc_can_offload(adapter->netdev)) | |
| return -EOPNOTSUPP; | |
| switch (type) { | |
| case TC_SETUP_CLSU32: | |
| return ixgbe_setup_tc_cls_u32(adapter, type_data); | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| static int ixgbe_setup_tc_block(struct net_device *dev, | |
| struct tc_block_offload *f) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| if (f->binder_type != TCF_BLOCK_BINDER_TYPE_CLSACT_INGRESS) | |
| return -EOPNOTSUPP; | |
| switch (f->command) { | |
| case TC_BLOCK_BIND: | |
| return tcf_block_cb_register(f->block, ixgbe_setup_tc_block_cb, | |
| adapter, adapter); | |
| case TC_BLOCK_UNBIND: | |
| tcf_block_cb_unregister(f->block, ixgbe_setup_tc_block_cb, | |
| adapter); | |
| return 0; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| static int ixgbe_setup_tc_mqprio(struct net_device *dev, | |
| struct tc_mqprio_qopt *mqprio) | |
| { | |
| mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS; | |
| return ixgbe_setup_tc(dev, mqprio->num_tc); | |
| } | |
| static int __ixgbe_setup_tc(struct net_device *dev, enum tc_setup_type type, | |
| void *type_data) | |
| { | |
| switch (type) { | |
| case TC_SETUP_BLOCK: | |
| return ixgbe_setup_tc_block(dev, type_data); | |
| case TC_SETUP_QDISC_MQPRIO: | |
| return ixgbe_setup_tc_mqprio(dev, type_data); | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| #ifdef CONFIG_PCI_IOV | |
| void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter) | |
| { | |
| struct net_device *netdev = adapter->netdev; | |
| rtnl_lock(); | |
| ixgbe_setup_tc(netdev, netdev_get_num_tc(netdev)); | |
| rtnl_unlock(); | |
| } | |
| #endif | |
| void ixgbe_do_reset(struct net_device *netdev) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| if (netif_running(netdev)) | |
| ixgbe_reinit_locked(adapter); | |
| else | |
| ixgbe_reset(adapter); | |
| } | |
| static netdev_features_t ixgbe_fix_features(struct net_device *netdev, | |
| netdev_features_t features) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| /* If Rx checksum is disabled, then RSC/LRO should also be disabled */ | |
| if (!(features & NETIF_F_RXCSUM)) | |
| features &= ~NETIF_F_LRO; | |
| /* Turn off LRO if not RSC capable */ | |
| if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) | |
| features &= ~NETIF_F_LRO; | |
| return features; | |
| } | |
| static int ixgbe_set_features(struct net_device *netdev, | |
| netdev_features_t features) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); | |
| netdev_features_t changed = netdev->features ^ features; | |
| bool need_reset = false; | |
| /* Make sure RSC matches LRO, reset if change */ | |
| if (!(features & NETIF_F_LRO)) { | |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) | |
| need_reset = true; | |
| adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; | |
| } else if ((adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) && | |
| !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) { | |
| if (adapter->rx_itr_setting == 1 || | |
| adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR) { | |
| adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; | |
| need_reset = true; | |
| } else if ((changed ^ features) & NETIF_F_LRO) { | |
| e_info(probe, "rx-usecs set too low, " | |
| "disabling RSC\n"); | |
| } | |
| } | |
| /* | |
| * Check if Flow Director n-tuple support or hw_tc support was | |
| * enabled or disabled. If the state changed, we need to reset. | |
| */ | |
| if ((features & NETIF_F_NTUPLE) || (features & NETIF_F_HW_TC)) { | |
| /* turn off ATR, enable perfect filters and reset */ | |
| if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) | |
| need_reset = true; | |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; | |
| adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE; | |
| } else { | |
| /* turn off perfect filters, enable ATR and reset */ | |
| if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) | |
| need_reset = true; | |
| adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; | |
| /* We cannot enable ATR if SR-IOV is enabled */ | |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED || | |
| /* We cannot enable ATR if we have 2 or more tcs */ | |
| (netdev_get_num_tc(netdev) > 1) || | |
| /* We cannot enable ATR if RSS is disabled */ | |
| (adapter->ring_feature[RING_F_RSS].limit <= 1) || | |
| /* A sample rate of 0 indicates ATR disabled */ | |
| (!adapter->atr_sample_rate)) | |
| ; /* do nothing not supported */ | |
| else /* otherwise supported and set the flag */ | |
| adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; | |
| } | |
| if (changed & NETIF_F_RXALL) | |
| need_reset = true; | |
| netdev->features = features; | |
| if ((adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE)) { | |
| if (features & NETIF_F_RXCSUM) { | |
| adapter->flags2 |= IXGBE_FLAG2_UDP_TUN_REREG_NEEDED; | |
| } else { | |
| u32 port_mask = IXGBE_VXLANCTRL_VXLAN_UDPPORT_MASK; | |
| ixgbe_clear_udp_tunnel_port(adapter, port_mask); | |
| } | |
| } | |
| if ((adapter->flags & IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE)) { | |
| if (features & NETIF_F_RXCSUM) { | |
| adapter->flags2 |= IXGBE_FLAG2_UDP_TUN_REREG_NEEDED; | |
| } else { | |
| u32 port_mask = IXGBE_VXLANCTRL_GENEVE_UDPPORT_MASK; | |
| ixgbe_clear_udp_tunnel_port(adapter, port_mask); | |
| } | |
| } | |
| if (need_reset) | |
| ixgbe_do_reset(netdev); | |
| else if (changed & (NETIF_F_HW_VLAN_CTAG_RX | | |
| NETIF_F_HW_VLAN_CTAG_FILTER)) | |
| ixgbe_set_rx_mode(netdev); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_add_udp_tunnel_port - Get notifications about adding UDP tunnel ports | |
| * @dev: The port's netdev | |
| * @ti: Tunnel endpoint information | |
| **/ | |
| static void ixgbe_add_udp_tunnel_port(struct net_device *dev, | |
| struct udp_tunnel_info *ti) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| __be16 port = ti->port; | |
| u32 port_shift = 0; | |
| u32 reg; | |
| if (ti->sa_family != AF_INET) | |
| return; | |
| switch (ti->type) { | |
| case UDP_TUNNEL_TYPE_VXLAN: | |
| if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE)) | |
| return; | |
| if (adapter->vxlan_port == port) | |
| return; | |
| if (adapter->vxlan_port) { | |
| netdev_info(dev, | |
| "VXLAN port %d set, not adding port %d\n", | |
| ntohs(adapter->vxlan_port), | |
| ntohs(port)); | |
| return; | |
| } | |
| adapter->vxlan_port = port; | |
| break; | |
| case UDP_TUNNEL_TYPE_GENEVE: | |
| if (!(adapter->flags & IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE)) | |
| return; | |
| if (adapter->geneve_port == port) | |
| return; | |
| if (adapter->geneve_port) { | |
| netdev_info(dev, | |
| "GENEVE port %d set, not adding port %d\n", | |
| ntohs(adapter->geneve_port), | |
| ntohs(port)); | |
| return; | |
| } | |
| port_shift = IXGBE_VXLANCTRL_GENEVE_UDPPORT_SHIFT; | |
| adapter->geneve_port = port; | |
| break; | |
| default: | |
| return; | |
| } | |
| reg = IXGBE_READ_REG(hw, IXGBE_VXLANCTRL) | ntohs(port) << port_shift; | |
| IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, reg); | |
| } | |
| /** | |
| * ixgbe_del_udp_tunnel_port - Get notifications about removing UDP tunnel ports | |
| * @dev: The port's netdev | |
| * @ti: Tunnel endpoint information | |
| **/ | |
| static void ixgbe_del_udp_tunnel_port(struct net_device *dev, | |
| struct udp_tunnel_info *ti) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| u32 port_mask; | |
| if (ti->type != UDP_TUNNEL_TYPE_VXLAN && | |
| ti->type != UDP_TUNNEL_TYPE_GENEVE) | |
| return; | |
| if (ti->sa_family != AF_INET) | |
| return; | |
| switch (ti->type) { | |
| case UDP_TUNNEL_TYPE_VXLAN: | |
| if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE)) | |
| return; | |
| if (adapter->vxlan_port != ti->port) { | |
| netdev_info(dev, "VXLAN port %d not found\n", | |
| ntohs(ti->port)); | |
| return; | |
| } | |
| port_mask = IXGBE_VXLANCTRL_VXLAN_UDPPORT_MASK; | |
| break; | |
| case UDP_TUNNEL_TYPE_GENEVE: | |
| if (!(adapter->flags & IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE)) | |
| return; | |
| if (adapter->geneve_port != ti->port) { | |
| netdev_info(dev, "GENEVE port %d not found\n", | |
| ntohs(ti->port)); | |
| return; | |
| } | |
| port_mask = IXGBE_VXLANCTRL_GENEVE_UDPPORT_MASK; | |
| break; | |
| default: | |
| return; | |
| } | |
| ixgbe_clear_udp_tunnel_port(adapter, port_mask); | |
| adapter->flags2 |= IXGBE_FLAG2_UDP_TUN_REREG_NEEDED; | |
| } | |
| static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], | |
| struct net_device *dev, | |
| const unsigned char *addr, u16 vid, | |
| u16 flags) | |
| { | |
| /* guarantee we can provide a unique filter for the unicast address */ | |
| if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| u16 pool = VMDQ_P(0); | |
| if (netdev_uc_count(dev) >= ixgbe_available_rars(adapter, pool)) | |
| return -ENOMEM; | |
| } | |
| return ndo_dflt_fdb_add(ndm, tb, dev, addr, vid, flags); | |
| } | |
| /** | |
| * ixgbe_configure_bridge_mode - set various bridge modes | |
| * @adapter - the private structure | |
| * @mode - requested bridge mode | |
| * | |
| * Configure some settings require for various bridge modes. | |
| **/ | |
| static int ixgbe_configure_bridge_mode(struct ixgbe_adapter *adapter, | |
| __u16 mode) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| unsigned int p, num_pools; | |
| u32 vmdctl; | |
| switch (mode) { | |
| case BRIDGE_MODE_VEPA: | |
| /* disable Tx loopback, rely on switch hairpin mode */ | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_PFDTXGSWC, 0); | |
| /* must enable Rx switching replication to allow multicast | |
| * packet reception on all VFs, and to enable source address | |
| * pruning. | |
| */ | |
| vmdctl = IXGBE_READ_REG(hw, IXGBE_VMD_CTL); | |
| vmdctl |= IXGBE_VT_CTL_REPLEN; | |
| IXGBE_WRITE_REG(hw, IXGBE_VMD_CTL, vmdctl); | |
| /* enable Rx source address pruning. Note, this requires | |
| * replication to be enabled or else it does nothing. | |
| */ | |
| num_pools = adapter->num_vfs + adapter->num_rx_pools; | |
| for (p = 0; p < num_pools; p++) { | |
| if (hw->mac.ops.set_source_address_pruning) | |
| hw->mac.ops.set_source_address_pruning(hw, | |
| true, | |
| p); | |
| } | |
| break; | |
| case BRIDGE_MODE_VEB: | |
| /* enable Tx loopback for internal VF/PF communication */ | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_PFDTXGSWC, | |
| IXGBE_PFDTXGSWC_VT_LBEN); | |
| /* disable Rx switching replication unless we have SR-IOV | |
| * virtual functions | |
| */ | |
| vmdctl = IXGBE_READ_REG(hw, IXGBE_VMD_CTL); | |
| if (!adapter->num_vfs) | |
| vmdctl &= ~IXGBE_VT_CTL_REPLEN; | |
| IXGBE_WRITE_REG(hw, IXGBE_VMD_CTL, vmdctl); | |
| /* disable Rx source address pruning, since we don't expect to | |
| * be receiving external loopback of our transmitted frames. | |
| */ | |
| num_pools = adapter->num_vfs + adapter->num_rx_pools; | |
| for (p = 0; p < num_pools; p++) { | |
| if (hw->mac.ops.set_source_address_pruning) | |
| hw->mac.ops.set_source_address_pruning(hw, | |
| false, | |
| p); | |
| } | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| adapter->bridge_mode = mode; | |
| e_info(drv, "enabling bridge mode: %s\n", | |
| mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); | |
| return 0; | |
| } | |
| static int ixgbe_ndo_bridge_setlink(struct net_device *dev, | |
| struct nlmsghdr *nlh, u16 flags) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| struct nlattr *attr, *br_spec; | |
| int rem; | |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) | |
| return -EOPNOTSUPP; | |
| br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); | |
| if (!br_spec) | |
| return -EINVAL; | |
| nla_for_each_nested(attr, br_spec, rem) { | |
| int status; | |
| __u16 mode; | |
| if (nla_type(attr) != IFLA_BRIDGE_MODE) | |
| continue; | |
| if (nla_len(attr) < sizeof(mode)) | |
| return -EINVAL; | |
| mode = nla_get_u16(attr); | |
| status = ixgbe_configure_bridge_mode(adapter, mode); | |
| if (status) | |
| return status; | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int ixgbe_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, | |
| struct net_device *dev, | |
| u32 filter_mask, int nlflags) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) | |
| return 0; | |
| return ndo_dflt_bridge_getlink(skb, pid, seq, dev, | |
| adapter->bridge_mode, 0, 0, nlflags, | |
| filter_mask, NULL); | |
| } | |
| static void *ixgbe_fwd_add(struct net_device *pdev, struct net_device *vdev) | |
| { | |
| struct ixgbe_fwd_adapter *fwd_adapter = NULL; | |
| struct ixgbe_adapter *adapter = netdev_priv(pdev); | |
| int used_pools = adapter->num_vfs + adapter->num_rx_pools; | |
| unsigned int limit; | |
| int pool, err; | |
| /* Hardware has a limited number of available pools. Each VF, and the | |
| * PF require a pool. Check to ensure we don't attempt to use more | |
| * then the available number of pools. | |
| */ | |
| if (used_pools >= IXGBE_MAX_VF_FUNCTIONS) | |
| return ERR_PTR(-EINVAL); | |
| #ifdef CONFIG_RPS | |
| if (vdev->num_rx_queues != vdev->num_tx_queues) { | |
| netdev_info(pdev, "%s: Only supports a single queue count for TX and RX\n", | |
| vdev->name); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| #endif | |
| /* Check for hardware restriction on number of rx/tx queues */ | |
| if (vdev->num_tx_queues > IXGBE_MAX_L2A_QUEUES || | |
| vdev->num_tx_queues == IXGBE_BAD_L2A_QUEUE) { | |
| netdev_info(pdev, | |
| "%s: Supports RX/TX Queue counts 1,2, and 4\n", | |
| pdev->name); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| if (((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && | |
| adapter->num_rx_pools > IXGBE_MAX_DCBMACVLANS - 1) || | |
| (adapter->num_rx_pools > IXGBE_MAX_MACVLANS)) | |
| return ERR_PTR(-EBUSY); | |
| fwd_adapter = kzalloc(sizeof(*fwd_adapter), GFP_KERNEL); | |
| if (!fwd_adapter) | |
| return ERR_PTR(-ENOMEM); | |
| pool = find_first_zero_bit(&adapter->fwd_bitmask, 32); | |
| adapter->num_rx_pools++; | |
| set_bit(pool, &adapter->fwd_bitmask); | |
| limit = find_last_bit(&adapter->fwd_bitmask, 32); | |
| /* Enable VMDq flag so device will be set in VM mode */ | |
| adapter->flags |= IXGBE_FLAG_VMDQ_ENABLED | IXGBE_FLAG_SRIOV_ENABLED; | |
| adapter->ring_feature[RING_F_VMDQ].limit = limit + 1; | |
| adapter->ring_feature[RING_F_RSS].limit = vdev->num_tx_queues; | |
| /* Force reinit of ring allocation with VMDQ enabled */ | |
| err = ixgbe_setup_tc(pdev, netdev_get_num_tc(pdev)); | |
| if (err) | |
| goto fwd_add_err; | |
| fwd_adapter->pool = pool; | |
| fwd_adapter->real_adapter = adapter; | |
| if (netif_running(pdev)) { | |
| err = ixgbe_fwd_ring_up(vdev, fwd_adapter); | |
| if (err) | |
| goto fwd_add_err; | |
| netif_tx_start_all_queues(vdev); | |
| } | |
| return fwd_adapter; | |
| fwd_add_err: | |
| /* unwind counter and free adapter struct */ | |
| netdev_info(pdev, | |
| "%s: dfwd hardware acceleration failed\n", vdev->name); | |
| clear_bit(pool, &adapter->fwd_bitmask); | |
| adapter->num_rx_pools--; | |
| kfree(fwd_adapter); | |
| return ERR_PTR(err); | |
| } | |
| static void ixgbe_fwd_del(struct net_device *pdev, void *priv) | |
| { | |
| struct ixgbe_fwd_adapter *fwd_adapter = priv; | |
| struct ixgbe_adapter *adapter = fwd_adapter->real_adapter; | |
| unsigned int limit; | |
| clear_bit(fwd_adapter->pool, &adapter->fwd_bitmask); | |
| adapter->num_rx_pools--; | |
| limit = find_last_bit(&adapter->fwd_bitmask, 32); | |
| adapter->ring_feature[RING_F_VMDQ].limit = limit + 1; | |
| ixgbe_fwd_ring_down(fwd_adapter->netdev, fwd_adapter); | |
| /* go back to full RSS if we're done with our VMQs */ | |
| if (adapter->ring_feature[RING_F_VMDQ].limit == 1) { | |
| int rss = min_t(int, ixgbe_max_rss_indices(adapter), | |
| num_online_cpus()); | |
| adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED; | |
| adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED; | |
| adapter->ring_feature[RING_F_RSS].limit = rss; | |
| } | |
| ixgbe_setup_tc(pdev, netdev_get_num_tc(pdev)); | |
| netdev_dbg(pdev, "pool %i:%i queues %i:%i VSI bitmask %lx\n", | |
| fwd_adapter->pool, adapter->num_rx_pools, | |
| fwd_adapter->rx_base_queue, | |
| fwd_adapter->rx_base_queue + adapter->num_rx_queues_per_pool, | |
| adapter->fwd_bitmask); | |
| kfree(fwd_adapter); | |
| } | |
| #define IXGBE_MAX_MAC_HDR_LEN 127 | |
| #define IXGBE_MAX_NETWORK_HDR_LEN 511 | |
| static netdev_features_t | |
| ixgbe_features_check(struct sk_buff *skb, struct net_device *dev, | |
| netdev_features_t features) | |
| { | |
| unsigned int network_hdr_len, mac_hdr_len; | |
| /* Make certain the headers can be described by a context descriptor */ | |
| mac_hdr_len = skb_network_header(skb) - skb->data; | |
| if (unlikely(mac_hdr_len > IXGBE_MAX_MAC_HDR_LEN)) | |
| return features & ~(NETIF_F_HW_CSUM | | |
| NETIF_F_SCTP_CRC | | |
| NETIF_F_HW_VLAN_CTAG_TX | | |
| NETIF_F_TSO | | |
| NETIF_F_TSO6); | |
| network_hdr_len = skb_checksum_start(skb) - skb_network_header(skb); | |
| if (unlikely(network_hdr_len > IXGBE_MAX_NETWORK_HDR_LEN)) | |
| return features & ~(NETIF_F_HW_CSUM | | |
| NETIF_F_SCTP_CRC | | |
| NETIF_F_TSO | | |
| NETIF_F_TSO6); | |
| /* We can only support IPV4 TSO in tunnels if we can mangle the | |
| * inner IP ID field, so strip TSO if MANGLEID is not supported. | |
| */ | |
| if (skb->encapsulation && !(features & NETIF_F_TSO_MANGLEID)) | |
| features &= ~NETIF_F_TSO; | |
| return features; | |
| } | |
| static int ixgbe_xdp_setup(struct net_device *dev, struct bpf_prog *prog) | |
| { | |
| int i, frame_size = dev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| struct bpf_prog *old_prog; | |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) | |
| return -EINVAL; | |
| if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) | |
| return -EINVAL; | |
| /* verify ixgbe ring attributes are sufficient for XDP */ | |
| for (i = 0; i < adapter->num_rx_queues; i++) { | |
| struct ixgbe_ring *ring = adapter->rx_ring[i]; | |
| if (ring_is_rsc_enabled(ring)) | |
| return -EINVAL; | |
| if (frame_size > ixgbe_rx_bufsz(ring)) | |
| return -EINVAL; | |
| } | |
| if (nr_cpu_ids > MAX_XDP_QUEUES) | |
| return -ENOMEM; | |
| old_prog = xchg(&adapter->xdp_prog, prog); | |
| /* If transitioning XDP modes reconfigure rings */ | |
| if (!!prog != !!old_prog) { | |
| int err = ixgbe_setup_tc(dev, netdev_get_num_tc(dev)); | |
| if (err) { | |
| rcu_assign_pointer(adapter->xdp_prog, old_prog); | |
| return -EINVAL; | |
| } | |
| } else { | |
| for (i = 0; i < adapter->num_rx_queues; i++) | |
| xchg(&adapter->rx_ring[i]->xdp_prog, adapter->xdp_prog); | |
| } | |
| if (old_prog) | |
| bpf_prog_put(old_prog); | |
| return 0; | |
| } | |
| static int ixgbe_xdp(struct net_device *dev, struct netdev_bpf *xdp) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| switch (xdp->command) { | |
| case XDP_SETUP_PROG: | |
| return ixgbe_xdp_setup(dev, xdp->prog); | |
| case XDP_QUERY_PROG: | |
| xdp->prog_attached = !!(adapter->xdp_prog); | |
| xdp->prog_id = adapter->xdp_prog ? | |
| adapter->xdp_prog->aux->id : 0; | |
| return 0; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int ixgbe_xdp_xmit(struct net_device *dev, struct xdp_buff *xdp) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| struct ixgbe_ring *ring; | |
| int err; | |
| if (unlikely(test_bit(__IXGBE_DOWN, &adapter->state))) | |
| return -ENETDOWN; | |
| /* During program transitions its possible adapter->xdp_prog is assigned | |
| * but ring has not been configured yet. In this case simply abort xmit. | |
| */ | |
| ring = adapter->xdp_prog ? adapter->xdp_ring[smp_processor_id()] : NULL; | |
| if (unlikely(!ring)) | |
| return -ENXIO; | |
| err = ixgbe_xmit_xdp_ring(adapter, xdp); | |
| if (err != IXGBE_XDP_TX) | |
| return -ENOSPC; | |
| return 0; | |
| } | |
| static void ixgbe_xdp_flush(struct net_device *dev) | |
| { | |
| struct ixgbe_adapter *adapter = netdev_priv(dev); | |
| struct ixgbe_ring *ring; | |
| /* Its possible the device went down between xdp xmit and flush so | |
| * we need to ensure device is still up. | |
| */ | |
| if (unlikely(test_bit(__IXGBE_DOWN, &adapter->state))) | |
| return; | |
| ring = adapter->xdp_prog ? adapter->xdp_ring[smp_processor_id()] : NULL; | |
| if (unlikely(!ring)) | |
| return; | |
| /* Force memory writes to complete before letting h/w know there | |
| * are new descriptors to fetch. | |
| */ | |
| wmb(); | |
| writel(ring->next_to_use, ring->tail); | |
| return; | |
| } | |
| static const struct net_device_ops ixgbe_netdev_ops = { | |
| .ndo_open = ixgbe_open, | |
| .ndo_stop = ixgbe_close, | |
| .ndo_start_xmit = ixgbe_xmit_frame, | |
| .ndo_select_queue = ixgbe_select_queue, | |
| .ndo_set_rx_mode = ixgbe_set_rx_mode, | |
| .ndo_validate_addr = eth_validate_addr, | |
| .ndo_set_mac_address = ixgbe_set_mac, | |
| .ndo_change_mtu = ixgbe_change_mtu, | |
| .ndo_tx_timeout = ixgbe_tx_timeout, | |
| .ndo_set_tx_maxrate = ixgbe_tx_maxrate, | |
| .ndo_vlan_rx_add_vid = ixgbe_vlan_rx_add_vid, | |
| .ndo_vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid, | |
| .ndo_do_ioctl = ixgbe_ioctl, | |
| .ndo_set_vf_mac = ixgbe_ndo_set_vf_mac, | |
| .ndo_set_vf_vlan = ixgbe_ndo_set_vf_vlan, | |
| .ndo_set_vf_rate = ixgbe_ndo_set_vf_bw, | |
| .ndo_set_vf_spoofchk = ixgbe_ndo_set_vf_spoofchk, | |
| .ndo_set_vf_rss_query_en = ixgbe_ndo_set_vf_rss_query_en, | |
| .ndo_set_vf_trust = ixgbe_ndo_set_vf_trust, | |
| .ndo_get_vf_config = ixgbe_ndo_get_vf_config, | |
| .ndo_get_stats64 = ixgbe_get_stats64, | |
| .ndo_setup_tc = __ixgbe_setup_tc, | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| .ndo_poll_controller = ixgbe_netpoll, | |
| #endif | |
| #ifdef IXGBE_FCOE | |
| .ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get, | |
| .ndo_fcoe_ddp_target = ixgbe_fcoe_ddp_target, | |
| .ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put, | |
| .ndo_fcoe_enable = ixgbe_fcoe_enable, | |
| .ndo_fcoe_disable = ixgbe_fcoe_disable, | |
| .ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn, | |
| .ndo_fcoe_get_hbainfo = ixgbe_fcoe_get_hbainfo, | |
| #endif /* IXGBE_FCOE */ | |
| .ndo_set_features = ixgbe_set_features, | |
| .ndo_fix_features = ixgbe_fix_features, | |
| .ndo_fdb_add = ixgbe_ndo_fdb_add, | |
| .ndo_bridge_setlink = ixgbe_ndo_bridge_setlink, | |
| .ndo_bridge_getlink = ixgbe_ndo_bridge_getlink, | |
| .ndo_dfwd_add_station = ixgbe_fwd_add, | |
| .ndo_dfwd_del_station = ixgbe_fwd_del, | |
| .ndo_udp_tunnel_add = ixgbe_add_udp_tunnel_port, | |
| .ndo_udp_tunnel_del = ixgbe_del_udp_tunnel_port, | |
| .ndo_features_check = ixgbe_features_check, | |
| .ndo_bpf = ixgbe_xdp, | |
| .ndo_xdp_xmit = ixgbe_xdp_xmit, | |
| .ndo_xdp_flush = ixgbe_xdp_flush, | |
| }; | |
| /** | |
| * ixgbe_enumerate_functions - Get the number of ports this device has | |
| * @adapter: adapter structure | |
| * | |
| * This function enumerates the phsyical functions co-located on a single slot, | |
| * in order to determine how many ports a device has. This is most useful in | |
| * determining the required GT/s of PCIe bandwidth necessary for optimal | |
| * performance. | |
| **/ | |
| static inline int ixgbe_enumerate_functions(struct ixgbe_adapter *adapter) | |
| { | |
| struct pci_dev *entry, *pdev = adapter->pdev; | |
| int physfns = 0; | |
| /* Some cards can not use the generic count PCIe functions method, | |
| * because they are behind a parent switch, so we hardcode these with | |
| * the correct number of functions. | |
| */ | |
| if (ixgbe_pcie_from_parent(&adapter->hw)) | |
| physfns = 4; | |
| list_for_each_entry(entry, &adapter->pdev->bus->devices, bus_list) { | |
| /* don't count virtual functions */ | |
| if (entry->is_virtfn) | |
| continue; | |
| /* When the devices on the bus don't all match our device ID, | |
| * we can't reliably determine the correct number of | |
| * functions. This can occur if a function has been direct | |
| * attached to a virtual machine using VT-d, for example. In | |
| * this case, simply return -1 to indicate this. | |
| */ | |
| if ((entry->vendor != pdev->vendor) || | |
| (entry->device != pdev->device)) | |
| return -1; | |
| physfns++; | |
| } | |
| return physfns; | |
| } | |
| /** | |
| * ixgbe_wol_supported - Check whether device supports WoL | |
| * @adapter: the adapter private structure | |
| * @device_id: the device ID | |
| * @subdev_id: the subsystem device ID | |
| * | |
| * This function is used by probe and ethtool to determine | |
| * which devices have WoL support | |
| * | |
| **/ | |
| bool ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id, | |
| u16 subdevice_id) | |
| { | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK; | |
| /* WOL not supported on 82598 */ | |
| if (hw->mac.type == ixgbe_mac_82598EB) | |
| return false; | |
| /* check eeprom to see if WOL is enabled for X540 and newer */ | |
| if (hw->mac.type >= ixgbe_mac_X540) { | |
| if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || | |
| ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && | |
| (hw->bus.func == 0))) | |
| return true; | |
| } | |
| /* WOL is determined based on device IDs for 82599 MACs */ | |
| switch (device_id) { | |
| case IXGBE_DEV_ID_82599_SFP: | |
| /* Only these subdevices could supports WOL */ | |
| switch (subdevice_id) { | |
| case IXGBE_SUBDEV_ID_82599_560FLR: | |
| case IXGBE_SUBDEV_ID_82599_LOM_SNAP6: | |
| case IXGBE_SUBDEV_ID_82599_SFP_WOL0: | |
| case IXGBE_SUBDEV_ID_82599_SFP_2OCP: | |
| /* only support first port */ | |
| if (hw->bus.func != 0) | |
| break; | |
| /* fall through */ | |
| case IXGBE_SUBDEV_ID_82599_SP_560FLR: | |
| case IXGBE_SUBDEV_ID_82599_SFP: | |
| case IXGBE_SUBDEV_ID_82599_RNDC: | |
| case IXGBE_SUBDEV_ID_82599_ECNA_DP: | |
| case IXGBE_SUBDEV_ID_82599_SFP_1OCP: | |
| case IXGBE_SUBDEV_ID_82599_SFP_LOM_OEM1: | |
| case IXGBE_SUBDEV_ID_82599_SFP_LOM_OEM2: | |
| return true; | |
| } | |
| break; | |
| case IXGBE_DEV_ID_82599EN_SFP: | |
| /* Only these subdevices support WOL */ | |
| switch (subdevice_id) { | |
| case IXGBE_SUBDEV_ID_82599EN_SFP_OCP1: | |
| return true; | |
| } | |
| break; | |
| case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: | |
| /* All except this subdevice support WOL */ | |
| if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) | |
| return true; | |
| break; | |
| case IXGBE_DEV_ID_82599_KX4: | |
| return true; | |
| default: | |
| break; | |
| } | |
| return false; | |
| } | |
| /** | |
| * ixgbe_probe - Device Initialization Routine | |
| * @pdev: PCI device information struct | |
| * @ent: entry in ixgbe_pci_tbl | |
| * | |
| * Returns 0 on success, negative on failure | |
| * | |
| * ixgbe_probe initializes an adapter identified by a pci_dev structure. | |
| * The OS initialization, configuring of the adapter private structure, | |
| * and a hardware reset occur. | |
| **/ | |
| static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | |
| { | |
| struct net_device *netdev; | |
| struct ixgbe_adapter *adapter = NULL; | |
| struct ixgbe_hw *hw; | |
| const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; | |
| int i, err, pci_using_dac, expected_gts; | |
| unsigned int indices = MAX_TX_QUEUES; | |
| u8 part_str[IXGBE_PBANUM_LENGTH]; | |
| bool disable_dev = false; | |
| #ifdef IXGBE_FCOE | |
| u16 device_caps; | |
| #endif | |
| u32 eec; | |
| /* Catch broken hardware that put the wrong VF device ID in | |
| * the PCIe SR-IOV capability. | |
| */ | |
| if (pdev->is_virtfn) { | |
| WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n", | |
| pci_name(pdev), pdev->vendor, pdev->device); | |
| return -EINVAL; | |
| } | |
| err = pci_enable_device_mem(pdev); | |
| if (err) | |
| return err; | |
| if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { | |
| pci_using_dac = 1; | |
| } else { | |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | |
| if (err) { | |
| dev_err(&pdev->dev, | |
| "No usable DMA configuration, aborting\n"); | |
| goto err_dma; | |
| } | |
| pci_using_dac = 0; | |
| } | |
| err = pci_request_mem_regions(pdev, ixgbe_driver_name); | |
| if (err) { | |
| dev_err(&pdev->dev, | |
| "pci_request_selected_regions failed 0x%x\n", err); | |
| goto err_pci_reg; | |
| } | |
| pci_enable_pcie_error_reporting(pdev); | |
| pci_set_master(pdev); | |
| pci_save_state(pdev); | |
| if (ii->mac == ixgbe_mac_82598EB) { | |
| #ifdef CONFIG_IXGBE_DCB | |
| /* 8 TC w/ 4 queues per TC */ | |
| indices = 4 * MAX_TRAFFIC_CLASS; | |
| #else | |
| indices = IXGBE_MAX_RSS_INDICES; | |
| #endif | |
| } | |
| netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices); | |
| if (!netdev) { | |
| err = -ENOMEM; | |
| goto err_alloc_etherdev; | |
| } | |
| SET_NETDEV_DEV(netdev, &pdev->dev); | |
| adapter = netdev_priv(netdev); | |
| adapter->netdev = netdev; | |
| adapter->pdev = pdev; | |
| hw = &adapter->hw; | |
| hw->back = adapter; | |
| adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); | |
| hw->hw_addr = ioremap(pci_resource_start(pdev, 0), | |
| pci_resource_len(pdev, 0)); | |
| adapter->io_addr = hw->hw_addr; | |
| if (!hw->hw_addr) { | |
| err = -EIO; | |
| goto err_ioremap; | |
| } | |
| netdev->netdev_ops = &ixgbe_netdev_ops; | |
| ixgbe_set_ethtool_ops(netdev); | |
| netdev->watchdog_timeo = 5 * HZ; | |
| strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); | |
| /* Setup hw api */ | |
| hw->mac.ops = *ii->mac_ops; | |
| hw->mac.type = ii->mac; | |
| hw->mvals = ii->mvals; | |
| if (ii->link_ops) | |
| hw->link.ops = *ii->link_ops; | |
| /* EEPROM */ | |
| hw->eeprom.ops = *ii->eeprom_ops; | |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); | |
| if (ixgbe_removed(hw->hw_addr)) { | |
| err = -EIO; | |
| goto err_ioremap; | |
| } | |
| /* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */ | |
| if (!(eec & BIT(8))) | |
| hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic; | |
| /* PHY */ | |
| hw->phy.ops = *ii->phy_ops; | |
| hw->phy.sfp_type = ixgbe_sfp_type_unknown; | |
| /* ixgbe_identify_phy_generic will set prtad and mmds properly */ | |
| hw->phy.mdio.prtad = MDIO_PRTAD_NONE; | |
| hw->phy.mdio.mmds = 0; | |
| hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; | |
| hw->phy.mdio.dev = netdev; | |
| hw->phy.mdio.mdio_read = ixgbe_mdio_read; | |
| hw->phy.mdio.mdio_write = ixgbe_mdio_write; | |
| /* setup the private structure */ | |
| err = ixgbe_sw_init(adapter, ii); | |
| if (err) | |
| goto err_sw_init; | |
| /* Make sure the SWFW semaphore is in a valid state */ | |
| if (hw->mac.ops.init_swfw_sync) | |
| hw->mac.ops.init_swfw_sync(hw); | |
| /* Make it possible the adapter to be woken up via WOL */ | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82599EB: | |
| case ixgbe_mac_X540: | |
| case ixgbe_mac_X550: | |
| case ixgbe_mac_X550EM_x: | |
| case ixgbe_mac_x550em_a: | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); | |
| break; | |
| default: | |
| break; | |
| } | |
| /* | |
| * If there is a fan on this device and it has failed log the | |
| * failure. | |
| */ | |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { | |
| u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); | |
| if (esdp & IXGBE_ESDP_SDP1) | |
| e_crit(probe, "Fan has stopped, replace the adapter\n"); | |
| } | |
| if (allow_unsupported_sfp) | |
| hw->allow_unsupported_sfp = allow_unsupported_sfp; | |
| /* reset_hw fills in the perm_addr as well */ | |
| hw->phy.reset_if_overtemp = true; | |
| err = hw->mac.ops.reset_hw(hw); | |
| hw->phy.reset_if_overtemp = false; | |
| ixgbe_set_eee_capable(adapter); | |
| if (err == IXGBE_ERR_SFP_NOT_PRESENT) { | |
| err = 0; | |
| } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { | |
| e_dev_err("failed to load because an unsupported SFP+ or QSFP module type was detected.\n"); | |
| e_dev_err("Reload the driver after installing a supported module.\n"); | |
| goto err_sw_init; | |
| } else if (err) { | |
| e_dev_err("HW Init failed: %d\n", err); | |
| goto err_sw_init; | |
| } | |
| #ifdef CONFIG_PCI_IOV | |
| /* SR-IOV not supported on the 82598 */ | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) | |
| goto skip_sriov; | |
| /* Mailbox */ | |
| ixgbe_init_mbx_params_pf(hw); | |
| hw->mbx.ops = ii->mbx_ops; | |
| pci_sriov_set_totalvfs(pdev, IXGBE_MAX_VFS_DRV_LIMIT); | |
| ixgbe_enable_sriov(adapter, max_vfs); | |
| skip_sriov: | |
| #endif | |
| netdev->features = NETIF_F_SG | | |
| NETIF_F_TSO | | |
| NETIF_F_TSO6 | | |
| NETIF_F_RXHASH | | |
| NETIF_F_RXCSUM | | |
| NETIF_F_HW_CSUM; | |
| #define IXGBE_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \ | |
| NETIF_F_GSO_GRE_CSUM | \ | |
| NETIF_F_GSO_IPXIP4 | \ | |
| NETIF_F_GSO_IPXIP6 | \ | |
| NETIF_F_GSO_UDP_TUNNEL | \ | |
| NETIF_F_GSO_UDP_TUNNEL_CSUM) | |
| netdev->gso_partial_features = IXGBE_GSO_PARTIAL_FEATURES; | |
| netdev->features |= NETIF_F_GSO_PARTIAL | | |
| IXGBE_GSO_PARTIAL_FEATURES; | |
| if (hw->mac.type >= ixgbe_mac_82599EB) | |
| netdev->features |= NETIF_F_SCTP_CRC; | |
| /* copy netdev features into list of user selectable features */ | |
| netdev->hw_features |= netdev->features | | |
| NETIF_F_HW_VLAN_CTAG_FILTER | | |
| NETIF_F_HW_VLAN_CTAG_RX | | |
| NETIF_F_HW_VLAN_CTAG_TX | | |
| NETIF_F_RXALL | | |
| NETIF_F_HW_L2FW_DOFFLOAD; | |
| if (hw->mac.type >= ixgbe_mac_82599EB) | |
| netdev->hw_features |= NETIF_F_NTUPLE | | |
| NETIF_F_HW_TC; | |
| if (pci_using_dac) | |
| netdev->features |= NETIF_F_HIGHDMA; | |
| netdev->vlan_features |= netdev->features | NETIF_F_TSO_MANGLEID; | |
| netdev->hw_enc_features |= netdev->vlan_features; | |
| netdev->mpls_features |= NETIF_F_SG | | |
| NETIF_F_TSO | | |
| NETIF_F_TSO6 | | |
| NETIF_F_HW_CSUM; | |
| netdev->mpls_features |= IXGBE_GSO_PARTIAL_FEATURES; | |
| /* set this bit last since it cannot be part of vlan_features */ | |
| netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | | |
| NETIF_F_HW_VLAN_CTAG_RX | | |
| NETIF_F_HW_VLAN_CTAG_TX; | |
| netdev->priv_flags |= IFF_UNICAST_FLT; | |
| netdev->priv_flags |= IFF_SUPP_NOFCS; | |
| /* MTU range: 68 - 9710 */ | |
| netdev->min_mtu = ETH_MIN_MTU; | |
| netdev->max_mtu = IXGBE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN); | |
| #ifdef CONFIG_IXGBE_DCB | |
| if (adapter->flags & IXGBE_FLAG_DCB_CAPABLE) | |
| netdev->dcbnl_ops = &ixgbe_dcbnl_ops; | |
| #endif | |
| #ifdef IXGBE_FCOE | |
| if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { | |
| unsigned int fcoe_l; | |
| if (hw->mac.ops.get_device_caps) { | |
| hw->mac.ops.get_device_caps(hw, &device_caps); | |
| if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS) | |
| adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; | |
| } | |
| fcoe_l = min_t(int, IXGBE_FCRETA_SIZE, num_online_cpus()); | |
| adapter->ring_feature[RING_F_FCOE].limit = fcoe_l; | |
| netdev->features |= NETIF_F_FSO | | |
| NETIF_F_FCOE_CRC; | |
| netdev->vlan_features |= NETIF_F_FSO | | |
| NETIF_F_FCOE_CRC | | |
| NETIF_F_FCOE_MTU; | |
| } | |
| #endif /* IXGBE_FCOE */ | |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) | |
| netdev->hw_features |= NETIF_F_LRO; | |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) | |
| netdev->features |= NETIF_F_LRO; | |
| /* make sure the EEPROM is good */ | |
| if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) { | |
| e_dev_err("The EEPROM Checksum Is Not Valid\n"); | |
| err = -EIO; | |
| goto err_sw_init; | |
| } | |
| eth_platform_get_mac_address(&adapter->pdev->dev, | |
| adapter->hw.mac.perm_addr); | |
| memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); | |
| if (!is_valid_ether_addr(netdev->dev_addr)) { | |
| e_dev_err("invalid MAC address\n"); | |
| err = -EIO; | |
| goto err_sw_init; | |
| } | |
| /* Set hw->mac.addr to permanent MAC address */ | |
| ether_addr_copy(hw->mac.addr, hw->mac.perm_addr); | |
| ixgbe_mac_set_default_filter(adapter); | |
| timer_setup(&adapter->service_timer, ixgbe_service_timer, 0); | |
| if (ixgbe_removed(hw->hw_addr)) { | |
| err = -EIO; | |
| goto err_sw_init; | |
| } | |
| INIT_WORK(&adapter->service_task, ixgbe_service_task); | |
| set_bit(__IXGBE_SERVICE_INITED, &adapter->state); | |
| clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); | |
| err = ixgbe_init_interrupt_scheme(adapter); | |
| if (err) | |
| goto err_sw_init; | |
| for (i = 0; i < adapter->num_rx_queues; i++) | |
| u64_stats_init(&adapter->rx_ring[i]->syncp); | |
| for (i = 0; i < adapter->num_tx_queues; i++) | |
| u64_stats_init(&adapter->tx_ring[i]->syncp); | |
| for (i = 0; i < adapter->num_xdp_queues; i++) | |
| u64_stats_init(&adapter->xdp_ring[i]->syncp); | |
| /* WOL not supported for all devices */ | |
| adapter->wol = 0; | |
| hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap); | |
| hw->wol_enabled = ixgbe_wol_supported(adapter, pdev->device, | |
| pdev->subsystem_device); | |
| if (hw->wol_enabled) | |
| adapter->wol = IXGBE_WUFC_MAG; | |
| device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); | |
| /* save off EEPROM version number */ | |
| hw->eeprom.ops.read(hw, 0x2e, &adapter->eeprom_verh); | |
| hw->eeprom.ops.read(hw, 0x2d, &adapter->eeprom_verl); | |
| /* pick up the PCI bus settings for reporting later */ | |
| if (ixgbe_pcie_from_parent(hw)) | |
| ixgbe_get_parent_bus_info(adapter); | |
| else | |
| hw->mac.ops.get_bus_info(hw); | |
| /* calculate the expected PCIe bandwidth required for optimal | |
| * performance. Note that some older parts will never have enough | |
| * bandwidth due to being older generation PCIe parts. We clamp these | |
| * parts to ensure no warning is displayed if it can't be fixed. | |
| */ | |
| switch (hw->mac.type) { | |
| case ixgbe_mac_82598EB: | |
| expected_gts = min(ixgbe_enumerate_functions(adapter) * 10, 16); | |
| break; | |
| default: | |
| expected_gts = ixgbe_enumerate_functions(adapter) * 10; | |
| break; | |
| } | |
| /* don't check link if we failed to enumerate functions */ | |
| if (expected_gts > 0) | |
| ixgbe_check_minimum_link(adapter, expected_gts); | |
| err = ixgbe_read_pba_string_generic(hw, part_str, sizeof(part_str)); | |
| if (err) | |
| strlcpy(part_str, "Unknown", sizeof(part_str)); | |
| if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) | |
| e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n", | |
| hw->mac.type, hw->phy.type, hw->phy.sfp_type, | |
| part_str); | |
| else | |
| e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n", | |
| hw->mac.type, hw->phy.type, part_str); | |
| e_dev_info("%pM\n", netdev->dev_addr); | |
| /* reset the hardware with the new settings */ | |
| err = hw->mac.ops.start_hw(hw); | |
| if (err == IXGBE_ERR_EEPROM_VERSION) { | |
| /* We are running on a pre-production device, log a warning */ | |
| e_dev_warn("This device is a pre-production adapter/LOM. " | |
| "Please be aware there may be issues associated " | |
| "with your hardware. If you are experiencing " | |
| "problems please contact your Intel or hardware " | |
| "representative who provided you with this " | |
| "hardware.\n"); | |
| } | |
| strcpy(netdev->name, "eth%d"); | |
| pci_set_drvdata(pdev, adapter); | |
| err = register_netdev(netdev); | |
| if (err) | |
| goto err_register; | |
| /* power down the optics for 82599 SFP+ fiber */ | |
| if (hw->mac.ops.disable_tx_laser) | |
| hw->mac.ops.disable_tx_laser(hw); | |
| /* carrier off reporting is important to ethtool even BEFORE open */ | |
| netif_carrier_off(netdev); | |
| #ifdef CONFIG_IXGBE_DCA | |
| if (dca_add_requester(&pdev->dev) == 0) { | |
| adapter->flags |= IXGBE_FLAG_DCA_ENABLED; | |
| ixgbe_setup_dca(adapter); | |
| } | |
| #endif | |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { | |
| e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs); | |
| for (i = 0; i < adapter->num_vfs; i++) | |
| ixgbe_vf_configuration(pdev, (i | 0x10000000)); | |
| } | |
| /* firmware requires driver version to be 0xFFFFFFFF | |
| * since os does not support feature | |
| */ | |
| if (hw->mac.ops.set_fw_drv_ver) | |
| hw->mac.ops.set_fw_drv_ver(hw, 0xFF, 0xFF, 0xFF, 0xFF, | |
| sizeof(ixgbe_driver_version) - 1, | |
| ixgbe_driver_version); | |
| /* add san mac addr to netdev */ | |
| ixgbe_add_sanmac_netdev(netdev); | |
| e_dev_info("%s\n", ixgbe_default_device_descr); | |
| #ifdef CONFIG_IXGBE_HWMON | |
| if (ixgbe_sysfs_init(adapter)) | |
| e_err(probe, "failed to allocate sysfs resources\n"); | |
| #endif /* CONFIG_IXGBE_HWMON */ | |
| ixgbe_dbg_adapter_init(adapter); | |
| /* setup link for SFP devices with MNG FW, else wait for IXGBE_UP */ | |
| if (ixgbe_mng_enabled(hw) && ixgbe_is_sfp(hw) && hw->mac.ops.setup_link) | |
| hw->mac.ops.setup_link(hw, | |
| IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL, | |
| true); | |
| return 0; | |
| err_register: | |
| ixgbe_release_hw_control(adapter); | |
| ixgbe_clear_interrupt_scheme(adapter); | |
| err_sw_init: | |
| ixgbe_disable_sriov(adapter); | |
| adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; | |
| iounmap(adapter->io_addr); | |
| kfree(adapter->jump_tables[0]); | |
| kfree(adapter->mac_table); | |
| kfree(adapter->rss_key); | |
| err_ioremap: | |
| disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state); | |
| free_netdev(netdev); | |
| err_alloc_etherdev: | |
| pci_release_mem_regions(pdev); | |
| err_pci_reg: | |
| err_dma: | |
| if (!adapter || disable_dev) | |
| pci_disable_device(pdev); | |
| return err; | |
| } | |
| /** | |
| * ixgbe_remove - Device Removal Routine | |
| * @pdev: PCI device information struct | |
| * | |
| * ixgbe_remove is called by the PCI subsystem to alert the driver | |
| * that it should release a PCI device. The could be caused by a | |
| * Hot-Plug event, or because the driver is going to be removed from | |
| * memory. | |
| **/ | |
| static void ixgbe_remove(struct pci_dev *pdev) | |
| { | |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); | |
| struct net_device *netdev; | |
| bool disable_dev; | |
| int i; | |
| /* if !adapter then we already cleaned up in probe */ | |
| if (!adapter) | |
| return; | |
| netdev = adapter->netdev; | |
| ixgbe_dbg_adapter_exit(adapter); | |
| set_bit(__IXGBE_REMOVING, &adapter->state); | |
| cancel_work_sync(&adapter->service_task); | |
| #ifdef CONFIG_IXGBE_DCA | |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { | |
| adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; | |
| dca_remove_requester(&pdev->dev); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, | |
| IXGBE_DCA_CTRL_DCA_DISABLE); | |
| } | |
| #endif | |
| #ifdef CONFIG_IXGBE_HWMON | |
| ixgbe_sysfs_exit(adapter); | |
| #endif /* CONFIG_IXGBE_HWMON */ | |
| /* remove the added san mac */ | |
| ixgbe_del_sanmac_netdev(netdev); | |
| #ifdef CONFIG_PCI_IOV | |
| ixgbe_disable_sriov(adapter); | |
| #endif | |
| if (netdev->reg_state == NETREG_REGISTERED) | |
| unregister_netdev(netdev); | |
| ixgbe_clear_interrupt_scheme(adapter); | |
| ixgbe_release_hw_control(adapter); | |
| #ifdef CONFIG_DCB | |
| kfree(adapter->ixgbe_ieee_pfc); | |
| kfree(adapter->ixgbe_ieee_ets); | |
| #endif | |
| iounmap(adapter->io_addr); | |
| pci_release_mem_regions(pdev); | |
| e_dev_info("complete\n"); | |
| for (i = 0; i < IXGBE_MAX_LINK_HANDLE; i++) { | |
| if (adapter->jump_tables[i]) { | |
| kfree(adapter->jump_tables[i]->input); | |
| kfree(adapter->jump_tables[i]->mask); | |
| } | |
| kfree(adapter->jump_tables[i]); | |
| } | |
| kfree(adapter->mac_table); | |
| kfree(adapter->rss_key); | |
| disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state); | |
| free_netdev(netdev); | |
| pci_disable_pcie_error_reporting(pdev); | |
| if (disable_dev) | |
| pci_disable_device(pdev); | |
| } | |
| /** | |
| * ixgbe_io_error_detected - called when PCI error is detected | |
| * @pdev: Pointer to PCI device | |
| * @state: The current pci connection state | |
| * | |
| * This function is called after a PCI bus error affecting | |
| * this device has been detected. | |
| */ | |
| static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, | |
| pci_channel_state_t state) | |
| { | |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); | |
| struct net_device *netdev = adapter->netdev; | |
| #ifdef CONFIG_PCI_IOV | |
| struct ixgbe_hw *hw = &adapter->hw; | |
| struct pci_dev *bdev, *vfdev; | |
| u32 dw0, dw1, dw2, dw3; | |
| int vf, pos; | |
| u16 req_id, pf_func; | |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB || | |
| adapter->num_vfs == 0) | |
| goto skip_bad_vf_detection; | |
| bdev = pdev->bus->self; | |
| while (bdev && (pci_pcie_type(bdev) != PCI_EXP_TYPE_ROOT_PORT)) | |
| bdev = bdev->bus->self; | |
| if (!bdev) | |
| goto skip_bad_vf_detection; | |
| pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR); | |
| if (!pos) | |
| goto skip_bad_vf_detection; | |
| dw0 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG); | |
| dw1 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 4); | |
| dw2 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 8); | |
| dw3 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 12); | |
| if (ixgbe_removed(hw->hw_addr)) | |
| goto skip_bad_vf_detection; | |
| req_id = dw1 >> 16; | |
| /* On the 82599 if bit 7 of the requestor ID is set then it's a VF */ | |
| if (!(req_id & 0x0080)) | |
| goto skip_bad_vf_detection; | |
| pf_func = req_id & 0x01; | |
| if ((pf_func & 1) == (pdev->devfn & 1)) { | |
| unsigned int device_id; | |
| vf = (req_id & 0x7F) >> 1; | |
| e_dev_err("VF %d has caused a PCIe error\n", vf); | |
| e_dev_err("TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: " | |
| "%8.8x\tdw3: %8.8x\n", | |
| dw0, dw1, dw2, dw3); | |
| switch (adapter->hw.mac.type) { | |
| case ixgbe_mac_82599EB: | |
| device_id = IXGBE_82599_VF_DEVICE_ID; | |
| break; | |
| case ixgbe_mac_X540: | |
| device_id = IXGBE_X540_VF_DEVICE_ID; | |
| break; | |
| case ixgbe_mac_X550: | |
| device_id = IXGBE_DEV_ID_X550_VF; | |
| break; | |
| case ixgbe_mac_X550EM_x: | |
| device_id = IXGBE_DEV_ID_X550EM_X_VF; | |
| break; | |
| case ixgbe_mac_x550em_a: | |
| device_id = IXGBE_DEV_ID_X550EM_A_VF; | |
| break; | |
| default: | |
| device_id = 0; | |
| break; | |
| } | |
| /* Find the pci device of the offending VF */ | |
| vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, device_id, NULL); | |
| while (vfdev) { | |
| if (vfdev->devfn == (req_id & 0xFF)) | |
| break; | |
| vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, | |
| device_id, vfdev); | |
| } | |
| /* | |
| * There's a slim chance the VF could have been hot plugged, | |
| * so if it is no longer present we don't need to issue the | |
| * VFLR. Just clean up the AER in that case. | |
| */ | |
| if (vfdev) { | |
| pcie_flr(vfdev); | |
| /* Free device reference count */ | |
| pci_dev_put(vfdev); | |
| } | |
| pci_cleanup_aer_uncorrect_error_status(pdev); | |
| } | |
| /* | |
| * Even though the error may have occurred on the other port | |
| * we still need to increment the vf error reference count for | |
| * both ports because the I/O resume function will be called | |
| * for both of them. | |
| */ | |
| adapter->vferr_refcount++; | |
| return PCI_ERS_RESULT_RECOVERED; | |
| skip_bad_vf_detection: | |
| #endif /* CONFIG_PCI_IOV */ | |
| if (!test_bit(__IXGBE_SERVICE_INITED, &adapter->state)) | |
| return PCI_ERS_RESULT_DISCONNECT; | |
| if (!netif_device_present(netdev)) | |
| return PCI_ERS_RESULT_DISCONNECT; | |
| rtnl_lock(); | |
| netif_device_detach(netdev); | |
| if (state == pci_channel_io_perm_failure) { | |
| rtnl_unlock(); | |
| return PCI_ERS_RESULT_DISCONNECT; | |
| } | |
| if (netif_running(netdev)) | |
| ixgbe_close_suspend(adapter); | |
| if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state)) | |
| pci_disable_device(pdev); | |
| rtnl_unlock(); | |
| /* Request a slot reset. */ | |
| return PCI_ERS_RESULT_NEED_RESET; | |
| } | |
| /** | |
| * ixgbe_io_slot_reset - called after the pci bus has been reset. | |
| * @pdev: Pointer to PCI device | |
| * | |
| * Restart the card from scratch, as if from a cold-boot. | |
| */ | |
| static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) | |
| { | |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); | |
| pci_ers_result_t result; | |
| int err; | |
| if (pci_enable_device_mem(pdev)) { | |
| e_err(probe, "Cannot re-enable PCI device after reset.\n"); | |
| result = PCI_ERS_RESULT_DISCONNECT; | |
| } else { | |
| smp_mb__before_atomic(); | |
| clear_bit(__IXGBE_DISABLED, &adapter->state); | |
| adapter->hw.hw_addr = adapter->io_addr; | |
| pci_set_master(pdev); | |
| pci_restore_state(pdev); | |
| pci_save_state(pdev); | |
| pci_wake_from_d3(pdev, false); | |
| ixgbe_reset(adapter); | |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); | |
| result = PCI_ERS_RESULT_RECOVERED; | |
| } | |
| err = pci_cleanup_aer_uncorrect_error_status(pdev); | |
| if (err) { | |
| e_dev_err("pci_cleanup_aer_uncorrect_error_status " | |
| "failed 0x%0x\n", err); | |
| /* non-fatal, continue */ | |
| } | |
| return result; | |
| } | |
| /** | |
| * ixgbe_io_resume - called when traffic can start flowing again. | |
| * @pdev: Pointer to PCI device | |
| * | |
| * This callback is called when the error recovery driver tells us that | |
| * its OK to resume normal operation. | |
| */ | |
| static void ixgbe_io_resume(struct pci_dev *pdev) | |
| { | |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); | |
| struct net_device *netdev = adapter->netdev; | |
| #ifdef CONFIG_PCI_IOV | |
| if (adapter->vferr_refcount) { | |
| e_info(drv, "Resuming after VF err\n"); | |
| adapter->vferr_refcount--; | |
| return; | |
| } | |
| #endif | |
| rtnl_lock(); | |
| if (netif_running(netdev)) | |
| ixgbe_open(netdev); | |
| netif_device_attach(netdev); | |
| rtnl_unlock(); | |
| } | |
| static const struct pci_error_handlers ixgbe_err_handler = { | |
| .error_detected = ixgbe_io_error_detected, | |
| .slot_reset = ixgbe_io_slot_reset, | |
| .resume = ixgbe_io_resume, | |
| }; | |
| static struct pci_driver ixgbe_driver = { | |
| .name = ixgbe_driver_name, | |
| .id_table = ixgbe_pci_tbl, | |
| .probe = ixgbe_probe, | |
| .remove = ixgbe_remove, | |
| #ifdef CONFIG_PM | |
| .suspend = ixgbe_suspend, | |
| .resume = ixgbe_resume, | |
| #endif | |
| .shutdown = ixgbe_shutdown, | |
| .sriov_configure = ixgbe_pci_sriov_configure, | |
| .err_handler = &ixgbe_err_handler | |
| }; | |
| /** | |
| * ixgbe_init_module - Driver Registration Routine | |
| * | |
| * ixgbe_init_module is the first routine called when the driver is | |
| * loaded. All it does is register with the PCI subsystem. | |
| **/ | |
| static int __init ixgbe_init_module(void) | |
| { | |
| int ret; | |
| pr_info("%s - version %s\n", ixgbe_driver_string, ixgbe_driver_version); | |
| pr_info("%s\n", ixgbe_copyright); | |
| ixgbe_wq = create_singlethread_workqueue(ixgbe_driver_name); | |
| if (!ixgbe_wq) { | |
| pr_err("%s: Failed to create workqueue\n", ixgbe_driver_name); | |
| return -ENOMEM; | |
| } | |
| ixgbe_dbg_init(); | |
| ret = pci_register_driver(&ixgbe_driver); | |
| if (ret) { | |
| destroy_workqueue(ixgbe_wq); | |
| ixgbe_dbg_exit(); | |
| return ret; | |
| } | |
| #ifdef CONFIG_IXGBE_DCA | |
| dca_register_notify(&dca_notifier); | |
| #endif | |
| return 0; | |
| } | |
| module_init(ixgbe_init_module); | |
| /** | |
| * ixgbe_exit_module - Driver Exit Cleanup Routine | |
| * | |
| * ixgbe_exit_module is called just before the driver is removed | |
| * from memory. | |
| **/ | |
| static void __exit ixgbe_exit_module(void) | |
| { | |
| #ifdef CONFIG_IXGBE_DCA | |
| dca_unregister_notify(&dca_notifier); | |
| #endif | |
| pci_unregister_driver(&ixgbe_driver); | |
| ixgbe_dbg_exit(); | |
| if (ixgbe_wq) { | |
| destroy_workqueue(ixgbe_wq); | |
| ixgbe_wq = NULL; | |
| } | |
| } | |
| #ifdef CONFIG_IXGBE_DCA | |
| static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event, | |
| void *p) | |
| { | |
| int ret_val; | |
| ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event, | |
| __ixgbe_notify_dca); | |
| return ret_val ? NOTIFY_BAD : NOTIFY_DONE; | |
| } | |
| #endif /* CONFIG_IXGBE_DCA */ | |
| module_exit(ixgbe_exit_module); | |
| /* ixgbe_main.c */ |