| /* | |
| * Copyright (c) 2014,2017 Qualcomm Atheros, Inc. | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| #include "wil6210.h" | |
| #include <linux/jiffies.h> | |
| int wil_can_suspend(struct wil6210_priv *wil, bool is_runtime) | |
| { | |
| int rc = 0; | |
| struct wireless_dev *wdev = wil->wdev; | |
| struct net_device *ndev = wil_to_ndev(wil); | |
| wil_dbg_pm(wil, "can_suspend: %s\n", is_runtime ? "runtime" : "system"); | |
| if (!(ndev->flags & IFF_UP)) { | |
| /* can always sleep when down */ | |
| wil_dbg_pm(wil, "Interface is down\n"); | |
| goto out; | |
| } | |
| if (test_bit(wil_status_resetting, wil->status)) { | |
| wil_dbg_pm(wil, "Delay suspend when resetting\n"); | |
| rc = -EBUSY; | |
| goto out; | |
| } | |
| if (wil->recovery_state != fw_recovery_idle) { | |
| wil_dbg_pm(wil, "Delay suspend during recovery\n"); | |
| rc = -EBUSY; | |
| goto out; | |
| } | |
| /* interface is running */ | |
| switch (wdev->iftype) { | |
| case NL80211_IFTYPE_MONITOR: | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| if (test_bit(wil_status_fwconnecting, wil->status)) { | |
| wil_dbg_pm(wil, "Delay suspend when connecting\n"); | |
| rc = -EBUSY; | |
| goto out; | |
| } | |
| break; | |
| /* AP-like interface - can't suspend */ | |
| default: | |
| wil_dbg_pm(wil, "AP-like interface\n"); | |
| rc = -EBUSY; | |
| break; | |
| } | |
| out: | |
| wil_dbg_pm(wil, "can_suspend: %s => %s (%d)\n", | |
| is_runtime ? "runtime" : "system", rc ? "No" : "Yes", rc); | |
| if (rc) | |
| wil->suspend_stats.rejected_by_host++; | |
| return rc; | |
| } | |
| static int wil_resume_keep_radio_on(struct wil6210_priv *wil) | |
| { | |
| int rc = 0; | |
| /* wil_status_resuming will be cleared when getting | |
| * WMI_TRAFFIC_RESUME_EVENTID | |
| */ | |
| set_bit(wil_status_resuming, wil->status); | |
| clear_bit(wil_status_suspended, wil->status); | |
| wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); | |
| wil_unmask_irq(wil); | |
| wil6210_bus_request(wil, wil->bus_request_kbps_pre_suspend); | |
| /* Send WMI resume request to the device */ | |
| rc = wmi_resume(wil); | |
| if (rc) { | |
| wil_err(wil, "device failed to resume (%d)\n", rc); | |
| if (no_fw_recovery) | |
| goto out; | |
| rc = wil_down(wil); | |
| if (rc) { | |
| wil_err(wil, "wil_down failed (%d)\n", rc); | |
| goto out; | |
| } | |
| rc = wil_up(wil); | |
| if (rc) { | |
| wil_err(wil, "wil_up failed (%d)\n", rc); | |
| goto out; | |
| } | |
| } | |
| /* Wake all queues */ | |
| if (test_bit(wil_status_fwconnected, wil->status)) | |
| wil_update_net_queues_bh(wil, NULL, false); | |
| out: | |
| if (rc) | |
| set_bit(wil_status_suspended, wil->status); | |
| return rc; | |
| } | |
| static int wil_suspend_keep_radio_on(struct wil6210_priv *wil) | |
| { | |
| int rc = 0; | |
| unsigned long start, data_comp_to; | |
| wil_dbg_pm(wil, "suspend keep radio on\n"); | |
| /* Prevent handling of new tx and wmi commands */ | |
| set_bit(wil_status_suspending, wil->status); | |
| wil_update_net_queues_bh(wil, NULL, true); | |
| if (!wil_is_tx_idle(wil)) { | |
| wil_dbg_pm(wil, "Pending TX data, reject suspend\n"); | |
| wil->suspend_stats.rejected_by_host++; | |
| goto reject_suspend; | |
| } | |
| if (!wil_is_rx_idle(wil)) { | |
| wil_dbg_pm(wil, "Pending RX data, reject suspend\n"); | |
| wil->suspend_stats.rejected_by_host++; | |
| goto reject_suspend; | |
| } | |
| if (!wil_is_wmi_idle(wil)) { | |
| wil_dbg_pm(wil, "Pending WMI events, reject suspend\n"); | |
| wil->suspend_stats.rejected_by_host++; | |
| goto reject_suspend; | |
| } | |
| /* Send WMI suspend request to the device */ | |
| rc = wmi_suspend(wil); | |
| if (rc) { | |
| wil_dbg_pm(wil, "wmi_suspend failed, reject suspend (%d)\n", | |
| rc); | |
| goto reject_suspend; | |
| } | |
| /* Wait for completion of the pending RX packets */ | |
| start = jiffies; | |
| data_comp_to = jiffies + msecs_to_jiffies(WIL_DATA_COMPLETION_TO_MS); | |
| if (test_bit(wil_status_napi_en, wil->status)) { | |
| while (!wil_is_rx_idle(wil)) { | |
| if (time_after(jiffies, data_comp_to)) { | |
| if (wil_is_rx_idle(wil)) | |
| break; | |
| wil_err(wil, | |
| "TO waiting for idle RX, suspend failed\n"); | |
| wil->suspend_stats.failed_suspends++; | |
| goto resume_after_fail; | |
| } | |
| wil_dbg_ratelimited(wil, "rx vring is not empty -> NAPI\n"); | |
| napi_synchronize(&wil->napi_rx); | |
| msleep(20); | |
| } | |
| } | |
| /* In case of pending WMI events, reject the suspend | |
| * and resume the device. | |
| * This can happen if the device sent the WMI events before | |
| * approving the suspend. | |
| */ | |
| if (!wil_is_wmi_idle(wil)) { | |
| wil_err(wil, "suspend failed due to pending WMI events\n"); | |
| wil->suspend_stats.failed_suspends++; | |
| goto resume_after_fail; | |
| } | |
| wil_mask_irq(wil); | |
| /* Disable device reset on PERST */ | |
| wil_s(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); | |
| if (wil->platform_ops.suspend) { | |
| rc = wil->platform_ops.suspend(wil->platform_handle, true); | |
| if (rc) { | |
| wil_err(wil, "platform device failed to suspend (%d)\n", | |
| rc); | |
| wil->suspend_stats.failed_suspends++; | |
| wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); | |
| wil_unmask_irq(wil); | |
| goto resume_after_fail; | |
| } | |
| } | |
| /* Save the current bus request to return to the same in resume */ | |
| wil->bus_request_kbps_pre_suspend = wil->bus_request_kbps; | |
| wil6210_bus_request(wil, 0); | |
| set_bit(wil_status_suspended, wil->status); | |
| clear_bit(wil_status_suspending, wil->status); | |
| return rc; | |
| resume_after_fail: | |
| set_bit(wil_status_resuming, wil->status); | |
| clear_bit(wil_status_suspending, wil->status); | |
| rc = wmi_resume(wil); | |
| /* if resume succeeded, reject the suspend */ | |
| if (!rc) { | |
| rc = -EBUSY; | |
| if (test_bit(wil_status_fwconnected, wil->status)) | |
| wil_update_net_queues_bh(wil, NULL, false); | |
| } | |
| return rc; | |
| reject_suspend: | |
| clear_bit(wil_status_suspending, wil->status); | |
| if (test_bit(wil_status_fwconnected, wil->status)) | |
| wil_update_net_queues_bh(wil, NULL, false); | |
| return -EBUSY; | |
| } | |
| static int wil_suspend_radio_off(struct wil6210_priv *wil) | |
| { | |
| int rc = 0; | |
| struct net_device *ndev = wil_to_ndev(wil); | |
| wil_dbg_pm(wil, "suspend radio off\n"); | |
| /* if netif up, hardware is alive, shut it down */ | |
| if (ndev->flags & IFF_UP) { | |
| rc = wil_down(wil); | |
| if (rc) { | |
| wil_err(wil, "wil_down : %d\n", rc); | |
| goto out; | |
| } | |
| } | |
| /* Disable PCIe IRQ to prevent sporadic IRQs when PCIe is suspending */ | |
| wil_dbg_pm(wil, "Disabling PCIe IRQ before suspending\n"); | |
| wil_disable_irq(wil); | |
| if (wil->platform_ops.suspend) { | |
| rc = wil->platform_ops.suspend(wil->platform_handle, false); | |
| if (rc) { | |
| wil_enable_irq(wil); | |
| goto out; | |
| } | |
| } | |
| set_bit(wil_status_suspended, wil->status); | |
| out: | |
| wil_dbg_pm(wil, "suspend radio off: %d\n", rc); | |
| return rc; | |
| } | |
| static int wil_resume_radio_off(struct wil6210_priv *wil) | |
| { | |
| int rc = 0; | |
| struct net_device *ndev = wil_to_ndev(wil); | |
| wil_dbg_pm(wil, "Enabling PCIe IRQ\n"); | |
| wil_enable_irq(wil); | |
| /* if netif up, bring hardware up | |
| * During open(), IFF_UP set after actual device method | |
| * invocation. This prevent recursive call to wil_up() | |
| * wil_status_suspended will be cleared in wil_reset | |
| */ | |
| if (ndev->flags & IFF_UP) | |
| rc = wil_up(wil); | |
| else | |
| clear_bit(wil_status_suspended, wil->status); | |
| return rc; | |
| } | |
| int wil_suspend(struct wil6210_priv *wil, bool is_runtime) | |
| { | |
| int rc = 0; | |
| struct net_device *ndev = wil_to_ndev(wil); | |
| bool keep_radio_on = ndev->flags & IFF_UP && | |
| wil->keep_radio_on_during_sleep; | |
| wil_dbg_pm(wil, "suspend: %s\n", is_runtime ? "runtime" : "system"); | |
| if (test_bit(wil_status_suspended, wil->status)) { | |
| wil_dbg_pm(wil, "trying to suspend while suspended\n"); | |
| return 0; | |
| } | |
| if (!keep_radio_on) | |
| rc = wil_suspend_radio_off(wil); | |
| else | |
| rc = wil_suspend_keep_radio_on(wil); | |
| wil_dbg_pm(wil, "suspend: %s => %d\n", | |
| is_runtime ? "runtime" : "system", rc); | |
| if (!rc) | |
| wil->suspend_stats.suspend_start_time = ktime_get(); | |
| return rc; | |
| } | |
| int wil_resume(struct wil6210_priv *wil, bool is_runtime) | |
| { | |
| int rc = 0; | |
| struct net_device *ndev = wil_to_ndev(wil); | |
| bool keep_radio_on = ndev->flags & IFF_UP && | |
| wil->keep_radio_on_during_sleep; | |
| unsigned long long suspend_time_usec = 0; | |
| wil_dbg_pm(wil, "resume: %s\n", is_runtime ? "runtime" : "system"); | |
| if (wil->platform_ops.resume) { | |
| rc = wil->platform_ops.resume(wil->platform_handle, | |
| keep_radio_on); | |
| if (rc) { | |
| wil_err(wil, "platform_ops.resume : %d\n", rc); | |
| goto out; | |
| } | |
| } | |
| if (keep_radio_on) | |
| rc = wil_resume_keep_radio_on(wil); | |
| else | |
| rc = wil_resume_radio_off(wil); | |
| if (rc) | |
| goto out; | |
| suspend_time_usec = | |
| ktime_to_us(ktime_sub(ktime_get(), | |
| wil->suspend_stats.suspend_start_time)); | |
| wil->suspend_stats.total_suspend_time += suspend_time_usec; | |
| if (suspend_time_usec < wil->suspend_stats.min_suspend_time) | |
| wil->suspend_stats.min_suspend_time = suspend_time_usec; | |
| if (suspend_time_usec > wil->suspend_stats.max_suspend_time) | |
| wil->suspend_stats.max_suspend_time = suspend_time_usec; | |
| out: | |
| wil_dbg_pm(wil, "resume: %s => %d, suspend time %lld usec\n", | |
| is_runtime ? "runtime" : "system", rc, suspend_time_usec); | |
| return rc; | |
| } |