| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/slab.h> | |
| #include <linux/export.h> | |
| #include <linux/etherdevice.h> | |
| #include "hostap_80211.h" | |
| #include "hostap_common.h" | |
| #include "hostap_wlan.h" | |
| #include "hostap.h" | |
| #include "hostap_ap.h" | |
| /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ | |
| /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ | |
| static unsigned char rfc1042_header[] = | |
| { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; | |
| /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ | |
| static unsigned char bridge_tunnel_header[] = | |
| { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; | |
| /* No encapsulation header if EtherType < 0x600 (=length) */ | |
| void hostap_dump_tx_80211(const char *name, struct sk_buff *skb) | |
| { | |
| struct ieee80211_hdr *hdr; | |
| u16 fc; | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n", | |
| name, skb->len, jiffies); | |
| if (skb->len < 2) | |
| return; | |
| fc = le16_to_cpu(hdr->frame_control); | |
| printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s", | |
| fc, (fc & IEEE80211_FCTL_FTYPE) >> 2, | |
| (fc & IEEE80211_FCTL_STYPE) >> 4, | |
| fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", | |
| fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); | |
| if (skb->len < IEEE80211_DATA_HDR3_LEN) { | |
| printk("\n"); | |
| return; | |
| } | |
| printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id), | |
| le16_to_cpu(hdr->seq_ctrl)); | |
| printk(KERN_DEBUG " A1=%pM", hdr->addr1); | |
| printk(" A2=%pM", hdr->addr2); | |
| printk(" A3=%pM", hdr->addr3); | |
| if (skb->len >= 30) | |
| printk(" A4=%pM", hdr->addr4); | |
| printk("\n"); | |
| } | |
| /* hard_start_xmit function for data interfaces (wlan#, wlan#wds#, wlan#sta) | |
| * Convert Ethernet header into a suitable IEEE 802.11 header depending on | |
| * device configuration. */ | |
| netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| int need_headroom, need_tailroom = 0; | |
| struct ieee80211_hdr hdr; | |
| u16 fc, ethertype = 0; | |
| enum { | |
| WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME | |
| } use_wds = WDS_NO; | |
| u8 *encaps_data; | |
| int hdr_len, encaps_len, skip_header_bytes; | |
| int to_assoc_ap = 0; | |
| struct hostap_skb_tx_data *meta; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (skb->len < ETH_HLEN) { | |
| printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb " | |
| "(len=%d)\n", dev->name, skb->len); | |
| kfree_skb(skb); | |
| return NETDEV_TX_OK; | |
| } | |
| if (local->ddev != dev) { | |
| use_wds = (local->iw_mode == IW_MODE_MASTER && | |
| !(local->wds_type & HOSTAP_WDS_STANDARD_FRAME)) ? | |
| WDS_OWN_FRAME : WDS_COMPLIANT_FRAME; | |
| if (dev == local->stadev) { | |
| to_assoc_ap = 1; | |
| use_wds = WDS_NO; | |
| } else if (dev == local->apdev) { | |
| printk(KERN_DEBUG "%s: prism2_tx: trying to use " | |
| "AP device with Ethernet net dev\n", dev->name); | |
| kfree_skb(skb); | |
| return NETDEV_TX_OK; | |
| } | |
| } else { | |
| if (local->iw_mode == IW_MODE_REPEAT) { | |
| printk(KERN_DEBUG "%s: prism2_tx: trying to use " | |
| "non-WDS link in Repeater mode\n", dev->name); | |
| kfree_skb(skb); | |
| return NETDEV_TX_OK; | |
| } else if (local->iw_mode == IW_MODE_INFRA && | |
| (local->wds_type & HOSTAP_WDS_AP_CLIENT) && | |
| !ether_addr_equal(skb->data + ETH_ALEN, dev->dev_addr)) { | |
| /* AP client mode: send frames with foreign src addr | |
| * using 4-addr WDS frames */ | |
| use_wds = WDS_COMPLIANT_FRAME; | |
| } | |
| } | |
| /* Incoming skb->data: dst_addr[6], src_addr[6], proto[2], payload | |
| * ==> | |
| * Prism2 TX frame with 802.11 header: | |
| * txdesc (address order depending on used mode; includes dst_addr and | |
| * src_addr), possible encapsulation (RFC1042/Bridge-Tunnel; | |
| * proto[2], payload {, possible addr4[6]} */ | |
| ethertype = (skb->data[12] << 8) | skb->data[13]; | |
| memset(&hdr, 0, sizeof(hdr)); | |
| /* Length of data after IEEE 802.11 header */ | |
| encaps_data = NULL; | |
| encaps_len = 0; | |
| skip_header_bytes = ETH_HLEN; | |
| if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { | |
| encaps_data = bridge_tunnel_header; | |
| encaps_len = sizeof(bridge_tunnel_header); | |
| skip_header_bytes -= 2; | |
| } else if (ethertype >= 0x600) { | |
| encaps_data = rfc1042_header; | |
| encaps_len = sizeof(rfc1042_header); | |
| skip_header_bytes -= 2; | |
| } | |
| fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA; | |
| hdr_len = IEEE80211_DATA_HDR3_LEN; | |
| if (use_wds != WDS_NO) { | |
| /* Note! Prism2 station firmware has problems with sending real | |
| * 802.11 frames with four addresses; until these problems can | |
| * be fixed or worked around, 4-addr frames needed for WDS are | |
| * using incompatible format: FromDS flag is not set and the | |
| * fourth address is added after the frame payload; it is | |
| * assumed, that the receiving station knows how to handle this | |
| * frame format */ | |
| if (use_wds == WDS_COMPLIANT_FRAME) { | |
| fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS; | |
| /* From&To DS: Addr1 = RA, Addr2 = TA, Addr3 = DA, | |
| * Addr4 = SA */ | |
| skb_copy_from_linear_data_offset(skb, ETH_ALEN, | |
| &hdr.addr4, ETH_ALEN); | |
| hdr_len += ETH_ALEN; | |
| } else { | |
| /* bogus 4-addr format to workaround Prism2 station | |
| * f/w bug */ | |
| fc |= IEEE80211_FCTL_TODS; | |
| /* From DS: Addr1 = DA (used as RA), | |
| * Addr2 = BSSID (used as TA), Addr3 = SA (used as DA), | |
| */ | |
| /* SA from skb->data + ETH_ALEN will be added after | |
| * frame payload; use hdr.addr4 as a temporary buffer | |
| */ | |
| skb_copy_from_linear_data_offset(skb, ETH_ALEN, | |
| &hdr.addr4, ETH_ALEN); | |
| need_tailroom += ETH_ALEN; | |
| } | |
| /* send broadcast and multicast frames to broadcast RA, if | |
| * configured; otherwise, use unicast RA of the WDS link */ | |
| if ((local->wds_type & HOSTAP_WDS_BROADCAST_RA) && | |
| is_multicast_ether_addr(skb->data)) | |
| eth_broadcast_addr(hdr.addr1); | |
| else if (iface->type == HOSTAP_INTERFACE_WDS) | |
| memcpy(&hdr.addr1, iface->u.wds.remote_addr, | |
| ETH_ALEN); | |
| else | |
| memcpy(&hdr.addr1, local->bssid, ETH_ALEN); | |
| memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN); | |
| skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN); | |
| } else if (local->iw_mode == IW_MODE_MASTER && !to_assoc_ap) { | |
| fc |= IEEE80211_FCTL_FROMDS; | |
| /* From DS: Addr1 = DA, Addr2 = BSSID, Addr3 = SA */ | |
| skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN); | |
| memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN); | |
| skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr3, | |
| ETH_ALEN); | |
| } else if (local->iw_mode == IW_MODE_INFRA || to_assoc_ap) { | |
| fc |= IEEE80211_FCTL_TODS; | |
| /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */ | |
| memcpy(&hdr.addr1, to_assoc_ap ? | |
| local->assoc_ap_addr : local->bssid, ETH_ALEN); | |
| skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2, | |
| ETH_ALEN); | |
| skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN); | |
| } else if (local->iw_mode == IW_MODE_ADHOC) { | |
| /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */ | |
| skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN); | |
| skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2, | |
| ETH_ALEN); | |
| memcpy(&hdr.addr3, local->bssid, ETH_ALEN); | |
| } | |
| hdr.frame_control = cpu_to_le16(fc); | |
| skb_pull(skb, skip_header_bytes); | |
| need_headroom = local->func->need_tx_headroom + hdr_len + encaps_len; | |
| if (skb_tailroom(skb) < need_tailroom) { | |
| skb = skb_unshare(skb, GFP_ATOMIC); | |
| if (skb == NULL) { | |
| iface->stats.tx_dropped++; | |
| return NETDEV_TX_OK; | |
| } | |
| if (pskb_expand_head(skb, need_headroom, need_tailroom, | |
| GFP_ATOMIC)) { | |
| kfree_skb(skb); | |
| iface->stats.tx_dropped++; | |
| return NETDEV_TX_OK; | |
| } | |
| } else if (skb_headroom(skb) < need_headroom) { | |
| struct sk_buff *tmp = skb; | |
| skb = skb_realloc_headroom(skb, need_headroom); | |
| kfree_skb(tmp); | |
| if (skb == NULL) { | |
| iface->stats.tx_dropped++; | |
| return NETDEV_TX_OK; | |
| } | |
| } else { | |
| skb = skb_unshare(skb, GFP_ATOMIC); | |
| if (skb == NULL) { | |
| iface->stats.tx_dropped++; | |
| return NETDEV_TX_OK; | |
| } | |
| } | |
| if (encaps_data) | |
| memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); | |
| memcpy(skb_push(skb, hdr_len), &hdr, hdr_len); | |
| if (use_wds == WDS_OWN_FRAME) { | |
| skb_put_data(skb, &hdr.addr4, ETH_ALEN); | |
| } | |
| iface->stats.tx_packets++; | |
| iface->stats.tx_bytes += skb->len; | |
| skb_reset_mac_header(skb); | |
| meta = (struct hostap_skb_tx_data *) skb->cb; | |
| memset(meta, 0, sizeof(*meta)); | |
| meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; | |
| if (use_wds) | |
| meta->flags |= HOSTAP_TX_FLAGS_WDS; | |
| meta->ethertype = ethertype; | |
| meta->iface = iface; | |
| /* Send IEEE 802.11 encapsulated frame using the master radio device */ | |
| skb->dev = local->dev; | |
| dev_queue_xmit(skb); | |
| return NETDEV_TX_OK; | |
| } | |
| /* hard_start_xmit function for hostapd wlan#ap interfaces */ | |
| netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| struct hostap_skb_tx_data *meta; | |
| struct ieee80211_hdr *hdr; | |
| u16 fc; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| if (skb->len < 10) { | |
| printk(KERN_DEBUG "%s: hostap_mgmt_start_xmit: short skb " | |
| "(len=%d)\n", dev->name, skb->len); | |
| kfree_skb(skb); | |
| return NETDEV_TX_OK; | |
| } | |
| iface->stats.tx_packets++; | |
| iface->stats.tx_bytes += skb->len; | |
| meta = (struct hostap_skb_tx_data *) skb->cb; | |
| memset(meta, 0, sizeof(*meta)); | |
| meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; | |
| meta->iface = iface; | |
| if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) { | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| fc = le16_to_cpu(hdr->frame_control); | |
| if (ieee80211_is_data(hdr->frame_control) && | |
| (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DATA) { | |
| u8 *pos = &skb->data[IEEE80211_DATA_HDR3_LEN + | |
| sizeof(rfc1042_header)]; | |
| meta->ethertype = (pos[0] << 8) | pos[1]; | |
| } | |
| } | |
| /* Send IEEE 802.11 encapsulated frame using the master radio device */ | |
| skb->dev = local->dev; | |
| dev_queue_xmit(skb); | |
| return NETDEV_TX_OK; | |
| } | |
| /* Called only from software IRQ */ | |
| static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, | |
| struct lib80211_crypt_data *crypt) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| struct ieee80211_hdr *hdr; | |
| int prefix_len, postfix_len, hdr_len, res; | |
| iface = netdev_priv(skb->dev); | |
| local = iface->local; | |
| if (skb->len < IEEE80211_DATA_HDR3_LEN) { | |
| kfree_skb(skb); | |
| return NULL; | |
| } | |
| if (local->tkip_countermeasures && | |
| strcmp(crypt->ops->name, "TKIP") == 0) { | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| if (net_ratelimit()) { | |
| printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " | |
| "TX packet to %pM\n", | |
| local->dev->name, hdr->addr1); | |
| } | |
| kfree_skb(skb); | |
| return NULL; | |
| } | |
| skb = skb_unshare(skb, GFP_ATOMIC); | |
| if (skb == NULL) | |
| return NULL; | |
| prefix_len = crypt->ops->extra_mpdu_prefix_len + | |
| crypt->ops->extra_msdu_prefix_len; | |
| postfix_len = crypt->ops->extra_mpdu_postfix_len + | |
| crypt->ops->extra_msdu_postfix_len; | |
| if ((skb_headroom(skb) < prefix_len || | |
| skb_tailroom(skb) < postfix_len) && | |
| pskb_expand_head(skb, prefix_len, postfix_len, GFP_ATOMIC)) { | |
| kfree_skb(skb); | |
| return NULL; | |
| } | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| hdr_len = hostap_80211_get_hdrlen(hdr->frame_control); | |
| /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so | |
| * call both MSDU and MPDU encryption functions from here. */ | |
| atomic_inc(&crypt->refcnt); | |
| res = 0; | |
| if (crypt->ops->encrypt_msdu) | |
| res = crypt->ops->encrypt_msdu(skb, hdr_len, crypt->priv); | |
| if (res == 0 && crypt->ops->encrypt_mpdu) | |
| res = crypt->ops->encrypt_mpdu(skb, hdr_len, crypt->priv); | |
| atomic_dec(&crypt->refcnt); | |
| if (res < 0) { | |
| kfree_skb(skb); | |
| return NULL; | |
| } | |
| return skb; | |
| } | |
| /* hard_start_xmit function for master radio interface wifi#. | |
| * AP processing (TX rate control, power save buffering, etc.). | |
| * Use hardware TX function to send the frame. */ | |
| netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct hostap_interface *iface; | |
| local_info_t *local; | |
| netdev_tx_t ret = NETDEV_TX_BUSY; | |
| u16 fc; | |
| struct hostap_tx_data tx; | |
| ap_tx_ret tx_ret; | |
| struct hostap_skb_tx_data *meta; | |
| int no_encrypt = 0; | |
| struct ieee80211_hdr *hdr; | |
| iface = netdev_priv(dev); | |
| local = iface->local; | |
| tx.skb = skb; | |
| tx.sta_ptr = NULL; | |
| meta = (struct hostap_skb_tx_data *) skb->cb; | |
| if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) { | |
| printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " | |
| "expected 0x%08x)\n", | |
| dev->name, meta->magic, HOSTAP_SKB_TX_DATA_MAGIC); | |
| ret = NETDEV_TX_OK; | |
| iface->stats.tx_dropped++; | |
| goto fail; | |
| } | |
| if (local->host_encrypt) { | |
| /* Set crypt to default algorithm and key; will be replaced in | |
| * AP code if STA has own alg/key */ | |
| tx.crypt = local->crypt_info.crypt[local->crypt_info.tx_keyidx]; | |
| tx.host_encrypt = 1; | |
| } else { | |
| tx.crypt = NULL; | |
| tx.host_encrypt = 0; | |
| } | |
| if (skb->len < 24) { | |
| printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb " | |
| "(len=%d)\n", dev->name, skb->len); | |
| ret = NETDEV_TX_OK; | |
| iface->stats.tx_dropped++; | |
| goto fail; | |
| } | |
| /* FIX (?): | |
| * Wi-Fi 802.11b test plan suggests that AP should ignore power save | |
| * bit in authentication and (re)association frames and assume tha | |
| * STA remains awake for the response. */ | |
| tx_ret = hostap_handle_sta_tx(local, &tx); | |
| skb = tx.skb; | |
| meta = (struct hostap_skb_tx_data *) skb->cb; | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| fc = le16_to_cpu(hdr->frame_control); | |
| switch (tx_ret) { | |
| case AP_TX_CONTINUE: | |
| break; | |
| case AP_TX_CONTINUE_NOT_AUTHORIZED: | |
| if (local->ieee_802_1x && | |
| ieee80211_is_data(hdr->frame_control) && | |
| meta->ethertype != ETH_P_PAE && | |
| !(meta->flags & HOSTAP_TX_FLAGS_WDS)) { | |
| printk(KERN_DEBUG "%s: dropped frame to unauthorized " | |
| "port (IEEE 802.1X): ethertype=0x%04x\n", | |
| dev->name, meta->ethertype); | |
| hostap_dump_tx_80211(dev->name, skb); | |
| ret = NETDEV_TX_OK; /* drop packet */ | |
| iface->stats.tx_dropped++; | |
| goto fail; | |
| } | |
| break; | |
| case AP_TX_DROP: | |
| ret = NETDEV_TX_OK; /* drop packet */ | |
| iface->stats.tx_dropped++; | |
| goto fail; | |
| case AP_TX_RETRY: | |
| goto fail; | |
| case AP_TX_BUFFERED: | |
| /* do not free skb here, it will be freed when the | |
| * buffered frame is sent/timed out */ | |
| ret = NETDEV_TX_OK; | |
| goto tx_exit; | |
| } | |
| /* Request TX callback if protocol version is 2 in 802.11 header; | |
| * this version 2 is a special case used between hostapd and kernel | |
| * driver */ | |
| if (((fc & IEEE80211_FCTL_VERS) == BIT(1)) && | |
| local->ap && local->ap->tx_callback_idx && meta->tx_cb_idx == 0) { | |
| meta->tx_cb_idx = local->ap->tx_callback_idx; | |
| /* remove special version from the frame header */ | |
| fc &= ~IEEE80211_FCTL_VERS; | |
| hdr->frame_control = cpu_to_le16(fc); | |
| } | |
| if (!ieee80211_is_data(hdr->frame_control)) { | |
| no_encrypt = 1; | |
| tx.crypt = NULL; | |
| } | |
| if (local->ieee_802_1x && meta->ethertype == ETH_P_PAE && tx.crypt && | |
| !(fc & IEEE80211_FCTL_PROTECTED)) { | |
| no_encrypt = 1; | |
| PDEBUG(DEBUG_EXTRA2, "%s: TX: IEEE 802.1X - passing " | |
| "unencrypted EAPOL frame\n", dev->name); | |
| tx.crypt = NULL; /* no encryption for IEEE 802.1X frames */ | |
| } | |
| if (tx.crypt && (!tx.crypt->ops || !tx.crypt->ops->encrypt_mpdu)) | |
| tx.crypt = NULL; | |
| else if ((tx.crypt || | |
| local->crypt_info.crypt[local->crypt_info.tx_keyidx]) && | |
| !no_encrypt) { | |
| /* Add ISWEP flag both for firmware and host based encryption | |
| */ | |
| fc |= IEEE80211_FCTL_PROTECTED; | |
| hdr->frame_control = cpu_to_le16(fc); | |
| } else if (local->drop_unencrypted && | |
| ieee80211_is_data(hdr->frame_control) && | |
| meta->ethertype != ETH_P_PAE) { | |
| if (net_ratelimit()) { | |
| printk(KERN_DEBUG "%s: dropped unencrypted TX data " | |
| "frame (drop_unencrypted=1)\n", dev->name); | |
| } | |
| iface->stats.tx_dropped++; | |
| ret = NETDEV_TX_OK; | |
| goto fail; | |
| } | |
| if (tx.crypt) { | |
| skb = hostap_tx_encrypt(skb, tx.crypt); | |
| if (skb == NULL) { | |
| printk(KERN_DEBUG "%s: TX - encryption failed\n", | |
| dev->name); | |
| ret = NETDEV_TX_OK; | |
| goto fail; | |
| } | |
| meta = (struct hostap_skb_tx_data *) skb->cb; | |
| if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) { | |
| printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " | |
| "expected 0x%08x) after hostap_tx_encrypt\n", | |
| dev->name, meta->magic, | |
| HOSTAP_SKB_TX_DATA_MAGIC); | |
| ret = NETDEV_TX_OK; | |
| iface->stats.tx_dropped++; | |
| goto fail; | |
| } | |
| } | |
| if (local->func->tx == NULL || local->func->tx(skb, dev)) { | |
| ret = NETDEV_TX_OK; | |
| iface->stats.tx_dropped++; | |
| } else { | |
| ret = NETDEV_TX_OK; | |
| iface->stats.tx_packets++; | |
| iface->stats.tx_bytes += skb->len; | |
| } | |
| fail: | |
| if (ret == NETDEV_TX_OK && skb) | |
| dev_kfree_skb(skb); | |
| tx_exit: | |
| if (tx.sta_ptr) | |
| hostap_handle_sta_release(tx.sta_ptr); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(hostap_master_start_xmit); |